Series comparison

target-arm queue: the big things here are the new nRF51
(microbit) devices and Luc's gdbstub multiprocess work.

thanks
-- PMM

The following changes since commit a29644590f95166c8a13e5797f8e7701134b31d0:

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-01-05' into staging (2019-01-07 11:55:52 +0000)

are available in the Git repository at:

https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190107

for you to fetch changes up to f831f955d420966471f5f8b316ba50d2523b1ff0:

Support u-boot noload images for arm as used by, NetBSD/evbarm GENERIC kernel. (2019-01-07 15:46:20 +0000)

----------------------------------------------------------------
target-arm queue:
 * Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
 * hw/misc/tz-mpc: Fix value of BLK_MAX register
 * target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
 * nRF51 SoC: add timer, GPIO, RNG peripherals
 * hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
 * cpus.c: Fix race condition in cpu_stop_current()
 * hw/arm: versal: Plug memory leaks
 * Allow M profile boards to run even if -kernel not specified
 * gdbstub: Add multiprocess extension support for use when the
   board has multiple CPUs of different types (like the Xilinx Zynq boards)
 * target/arm: Don't decode S bit in SVE brk[ab] merging insns
 * target/arm: Convert ARM_TBFLAG_* to FIELDs

----------------------------------------------------------------
Edgar E. Iglesias (1):
      hw/arm: versal: Plug memory leaks

Luc Michel (16):
      hw/cpu: introduce CPU clusters
      gdbstub: introduce GDB processes
      gdbstub: add multiprocess support to '?' packets
      gdbstub: add multiprocess support to 'H' and 'T' packets
      gdbstub: add multiprocess support to vCont packets
      gdbstub: add multiprocess support to 'sC' packets
      gdbstub: add multiprocess support to (f|s)ThreadInfo and ThreadExtraInfo
      gdbstub: add multiprocess support to Xfer:features:read:
      gdbstub: add multiprocess support to gdb_vm_state_change()
      gdbstub: add multiprocess support to 'D' packets
      gdbstub: add support for extended mode packet
      gdbstub: add support for vAttach packets
      gdbstub: processes initialization on new peer connection
      gdbstub: gdb_set_stop_cpu: ignore request when process is not attached
      gdbstub: add multiprocess extension support
      arm/xlnx-zynqmp: put APUs and RPUs in separate CPU clusters

Nick Hudson (1):
      Support u-boot noload images for arm as used by, NetBSD/evbarm GENERIC kernel.

Peter Maydell (3):
      cpus.c: Fix race condition in cpu_stop_current()
      target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
      hw/misc/tz-mpc: Fix value of BLK_MAX register

Philippe Mathieu-Daudé (1):
      hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller

Richard Henderson (2):
      target/arm: Convert ARM_TBFLAG_* to FIELDs
      target/arm: SVE brk[ab] merging does not have s bit

Stefan Hajnoczi (1):
      Revert "armv7m: Guard against no -kernel argument"

Steffen Görtz (11):
      qtest: Add set_irq_in command to set IRQ/GPIO level
      arm: Add header to host common definition for nRF51 SOC peripherals
      hw/misc/nrf51_rng: Add NRF51 random number generator peripheral
      arm: Instantiate NRF51 random number generator
      hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral
      arm: Instantiate NRF51 general purpose I/O
      tests/microbit-test: Add Tests for nRF51 GPIO
      hw/timer/nrf51_timer: Add nRF51 Timer peripheral
      arm: Instantiate NRF51 Timers
      tests/microbit-test: Add Tests for nRF51 Timer
      arm: Add Clock peripheral stub to NRF51 SOC

Thomas Huth (1):
      MAINTAINERS: Add ARM-related files for hw/[misc|input|timer]/

From: Richard Henderson <richard.henderson@linaro.org>

Use "register" TBFLAG_ANY to indicate shared state between
A32 and A64, and "registers" TBFLAG_A32 & TBFLAG_A64 for
fields that are specific to the given cpu state.

Move ARM_TBFLAG_BE_DATA to shared state, instead of its current
placement within "Bit usage when in AArch32 state".

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181218164348.7127-1-richard.henderson@linaro.org
[PMM: removed the renaming of BE_DATA flag to BE]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h           | 102 ++++++++-----------------------------
 target/arm/helper.c        |  49 +++++++++---------
 target/arm/translate-a64.c |  22 ++++----
 target/arm/translate.c     |  40 ++++++++-------
 4 files changed, 78 insertions(+), 135 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ static inline bool arm_cpu_data_is_big_endian(CPUARMState *env)
  * We put flags which are shared between 32 and 64 bit mode at the top
  * of the word, and flags which apply to only one mode at the bottom.
  */
-#define ARM_TBFLAG_AARCH64_STATE_SHIFT 31
-#define ARM_TBFLAG_AARCH64_STATE_MASK  (1U << ARM_TBFLAG_AARCH64_STATE_SHIFT)
-#define ARM_TBFLAG_MMUIDX_SHIFT 28
-#define ARM_TBFLAG_MMUIDX_MASK (0x7 << ARM_TBFLAG_MMUIDX_SHIFT)
-#define ARM_TBFLAG_SS_ACTIVE_SHIFT 27
-#define ARM_TBFLAG_SS_ACTIVE_MASK (1 << ARM_TBFLAG_SS_ACTIVE_SHIFT)
-#define ARM_TBFLAG_PSTATE_SS_SHIFT 26
-#define ARM_TBFLAG_PSTATE_SS_MASK (1 << ARM_TBFLAG_PSTATE_SS_SHIFT)
+FIELD(TBFLAG_ANY, AARCH64_STATE, 31, 1)
+FIELD(TBFLAG_ANY, MMUIDX, 28, 3)
+FIELD(TBFLAG_ANY, SS_ACTIVE, 27, 1)
+FIELD(TBFLAG_ANY, PSTATE_SS, 26, 1)
 /* Target EL if we take a floating-point-disabled exception */
-#define ARM_TBFLAG_FPEXC_EL_SHIFT 24
-#define ARM_TBFLAG_FPEXC_EL_MASK (0x3 << ARM_TBFLAG_FPEXC_EL_SHIFT)
+FIELD(TBFLAG_ANY, FPEXC_EL, 24, 2)
+FIELD(TBFLAG_ANY, BE_DATA, 23, 1)
 
 /* Bit usage when in AArch32 state: */
-#define ARM_TBFLAG_THUMB_SHIFT      0
-#define ARM_TBFLAG_THUMB_MASK       (1 << ARM_TBFLAG_THUMB_SHIFT)
-#define ARM_TBFLAG_VECLEN_SHIFT     1
-#define ARM_TBFLAG_VECLEN_MASK      (0x7 << ARM_TBFLAG_VECLEN_SHIFT)
-#define ARM_TBFLAG_VECSTRIDE_SHIFT  4
-#define ARM_TBFLAG_VECSTRIDE_MASK   (0x3 << ARM_TBFLAG_VECSTRIDE_SHIFT)
-#define ARM_TBFLAG_VFPEN_SHIFT      7
-#define ARM_TBFLAG_VFPEN_MASK       (1 << ARM_TBFLAG_VFPEN_SHIFT)
-#define ARM_TBFLAG_CONDEXEC_SHIFT   8
-#define ARM_TBFLAG_CONDEXEC_MASK    (0xff << ARM_TBFLAG_CONDEXEC_SHIFT)
-#define ARM_TBFLAG_SCTLR_B_SHIFT    16
-#define ARM_TBFLAG_SCTLR_B_MASK     (1 << ARM_TBFLAG_SCTLR_B_SHIFT)
+FIELD(TBFLAG_A32, THUMB, 0, 1)
+FIELD(TBFLAG_A32, VECLEN, 1, 3)
+FIELD(TBFLAG_A32, VECSTRIDE, 4, 2)
+FIELD(TBFLAG_A32, VFPEN, 7, 1)
+FIELD(TBFLAG_A32, CONDEXEC, 8, 8)
+FIELD(TBFLAG_A32, SCTLR_B, 16, 1)
 /* We store the bottom two bits of the CPAR as TB flags and handle
  * checks on the other bits at runtime
  */
-#define ARM_TBFLAG_XSCALE_CPAR_SHIFT 17
-#define ARM_TBFLAG_XSCALE_CPAR_MASK (3 << ARM_TBFLAG_XSCALE_CPAR_SHIFT)
+FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2)
 /* Indicates whether cp register reads and writes by guest code should access
  * the secure or nonsecure bank of banked registers; note that this is not
  * the same thing as the current security state of the processor!
  */
-#define ARM_TBFLAG_NS_SHIFT         19
-#define ARM_TBFLAG_NS_MASK          (1 << ARM_TBFLAG_NS_SHIFT)
-#define ARM_TBFLAG_BE_DATA_SHIFT    20
-#define ARM_TBFLAG_BE_DATA_MASK     (1 << ARM_TBFLAG_BE_DATA_SHIFT)
+FIELD(TBFLAG_A32, NS, 19, 1)
 /* For M profile only, Handler (ie not Thread) mode */
-#define ARM_TBFLAG_HANDLER_SHIFT    21
-#define ARM_TBFLAG_HANDLER_MASK     (1 << ARM_TBFLAG_HANDLER_SHIFT)
+FIELD(TBFLAG_A32, HANDLER, 21, 1)
 /* For M profile only, whether we should generate stack-limit checks */
-#define ARM_TBFLAG_STACKCHECK_SHIFT 22
-#define ARM_TBFLAG_STACKCHECK_MASK  (1 << ARM_TBFLAG_STACKCHECK_SHIFT)
+FIELD(TBFLAG_A32, STACKCHECK, 22, 1)
 
 /* Bit usage when in AArch64 state */
-#define ARM_TBFLAG_TBI0_SHIFT 0        /* TBI0 for EL0/1 or TBI for EL2/3 */
-#define ARM_TBFLAG_TBI0_MASK (0x1ull << ARM_TBFLAG_TBI0_SHIFT)
-#define ARM_TBFLAG_TBI1_SHIFT 1        /* TBI1 for EL0/1  */
-#define ARM_TBFLAG_TBI1_MASK (0x1ull << ARM_TBFLAG_TBI1_SHIFT)
-#define ARM_TBFLAG_SVEEXC_EL_SHIFT  2
-#define ARM_TBFLAG_SVEEXC_EL_MASK   (0x3 << ARM_TBFLAG_SVEEXC_EL_SHIFT)
-#define ARM_TBFLAG_ZCR_LEN_SHIFT    4
-#define ARM_TBFLAG_ZCR_LEN_MASK     (0xf << ARM_TBFLAG_ZCR_LEN_SHIFT)
-
-/* some convenience accessor macros */
-#define ARM_TBFLAG_AARCH64_STATE(F) \
-    (((F) & ARM_TBFLAG_AARCH64_STATE_MASK) >> ARM_TBFLAG_AARCH64_STATE_SHIFT)
-#define ARM_TBFLAG_MMUIDX(F) \
-    (((F) & ARM_TBFLAG_MMUIDX_MASK) >> ARM_TBFLAG_MMUIDX_SHIFT)
-#define ARM_TBFLAG_SS_ACTIVE(F) \
-    (((F) & ARM_TBFLAG_SS_ACTIVE_MASK) >> ARM_TBFLAG_SS_ACTIVE_SHIFT)
-#define ARM_TBFLAG_PSTATE_SS(F) \
-    (((F) & ARM_TBFLAG_PSTATE_SS_MASK) >> ARM_TBFLAG_PSTATE_SS_SHIFT)
-#define ARM_TBFLAG_FPEXC_EL(F) \
-    (((F) & ARM_TBFLAG_FPEXC_EL_MASK) >> ARM_TBFLAG_FPEXC_EL_SHIFT)
-#define ARM_TBFLAG_THUMB(F) \
-    (((F) & ARM_TBFLAG_THUMB_MASK) >> ARM_TBFLAG_THUMB_SHIFT)
-#define ARM_TBFLAG_VECLEN(F) \
-    (((F) & ARM_TBFLAG_VECLEN_MASK) >> ARM_TBFLAG_VECLEN_SHIFT)
-#define ARM_TBFLAG_VECSTRIDE(F) \
-    (((F) & ARM_TBFLAG_VECSTRIDE_MASK) >> ARM_TBFLAG_VECSTRIDE_SHIFT)
-#define ARM_TBFLAG_VFPEN(F) \
-    (((F) & ARM_TBFLAG_VFPEN_MASK) >> ARM_TBFLAG_VFPEN_SHIFT)
-#define ARM_TBFLAG_CONDEXEC(F) \
-    (((F) & ARM_TBFLAG_CONDEXEC_MASK) >> ARM_TBFLAG_CONDEXEC_SHIFT)
-#define ARM_TBFLAG_SCTLR_B(F) \
-    (((F) & ARM_TBFLAG_SCTLR_B_MASK) >> ARM_TBFLAG_SCTLR_B_SHIFT)
-#define ARM_TBFLAG_XSCALE_CPAR(F) \
-    (((F) & ARM_TBFLAG_XSCALE_CPAR_MASK) >> ARM_TBFLAG_XSCALE_CPAR_SHIFT)
-#define ARM_TBFLAG_NS(F) \
-    (((F) & ARM_TBFLAG_NS_MASK) >> ARM_TBFLAG_NS_SHIFT)
-#define ARM_TBFLAG_BE_DATA(F) \
-    (((F) & ARM_TBFLAG_BE_DATA_MASK) >> ARM_TBFLAG_BE_DATA_SHIFT)
-#define ARM_TBFLAG_HANDLER(F) \
-    (((F) & ARM_TBFLAG_HANDLER_MASK) >> ARM_TBFLAG_HANDLER_SHIFT)
-#define ARM_TBFLAG_STACKCHECK(F) \
-    (((F) & ARM_TBFLAG_STACKCHECK_MASK) >> ARM_TBFLAG_STACKCHECK_SHIFT)
-#define ARM_TBFLAG_TBI0(F) \
-    (((F) & ARM_TBFLAG_TBI0_MASK) >> ARM_TBFLAG_TBI0_SHIFT)
-#define ARM_TBFLAG_TBI1(F) \
-    (((F) & ARM_TBFLAG_TBI1_MASK) >> ARM_TBFLAG_TBI1_SHIFT)
-#define ARM_TBFLAG_SVEEXC_EL(F) \
-    (((F) & ARM_TBFLAG_SVEEXC_EL_MASK) >> ARM_TBFLAG_SVEEXC_EL_SHIFT)
-#define ARM_TBFLAG_ZCR_LEN(F) \
-    (((F) & ARM_TBFLAG_ZCR_LEN_MASK) >> ARM_TBFLAG_ZCR_LEN_SHIFT)
+FIELD(TBFLAG_A64, TBI0, 0, 1)
+FIELD(TBFLAG_A64, TBI1, 1, 1)
+FIELD(TBFLAG_A64, SVEEXC_EL, 2, 2)
+FIELD(TBFLAG_A64, ZCR_LEN, 4, 4)
 
 static inline bool bswap_code(bool sctlr_b)
 {
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc,
     ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false));
     int current_el = arm_current_el(env);
     int fp_el = fp_exception_el(env, current_el);
-    uint32_t flags;
+    uint32_t flags = 0;
 
     if (is_a64(env)) {
         ARMCPU *cpu = arm_env_get_cpu(env);
 
         *pc = env->pc;
-        flags = ARM_TBFLAG_AARCH64_STATE_MASK;
+        flags = FIELD_DP32(flags, TBFLAG_ANY, AARCH64_STATE, 1);
         /* Get control bits for tagged addresses */
-        flags |= (arm_regime_tbi0(env, mmu_idx) << ARM_TBFLAG_TBI0_SHIFT);
-        flags |= (arm_regime_tbi1(env, mmu_idx) << ARM_TBFLAG_TBI1_SHIFT);
+        flags = FIELD_DP32(flags, TBFLAG_A64, TBI0,
+                           arm_regime_tbi0(env, mmu_idx));
+        flags = FIELD_DP32(flags, TBFLAG_A64, TBI1,
+                           arm_regime_tbi1(env, mmu_idx));
 
         if (cpu_isar_feature(aa64_sve, cpu)) {
             int sve_el = sve_exception_el(env, current_el);
@@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc,
             } else {
                 zcr_len = sve_zcr_len_for_el(env, current_el);
             }
-            flags |= sve_el << ARM_TBFLAG_SVEEXC_EL_SHIFT;
-            flags |= zcr_len << ARM_TBFLAG_ZCR_LEN_SHIFT;
+            flags = FIELD_DP32(flags, TBFLAG_A64, SVEEXC_EL, sve_el);
+            flags = FIELD_DP32(flags, TBFLAG_A64, ZCR_LEN, zcr_len);
         }
     } else {
         *pc = env->regs[15];
-        flags = (env->thumb << ARM_TBFLAG_THUMB_SHIFT)
-            | (env->vfp.vec_len << ARM_TBFLAG_VECLEN_SHIFT)
-            | (env->vfp.vec_stride << ARM_TBFLAG_VECSTRIDE_SHIFT)
-            | (env->condexec_bits << ARM_TBFLAG_CONDEXEC_SHIFT)
-            | (arm_sctlr_b(env) << ARM_TBFLAG_SCTLR_B_SHIFT);
-        if (!(access_secure_reg(env))) {
-            flags |= ARM_TBFLAG_NS_MASK;
-        }
+        flags = FIELD_DP32(flags, TBFLAG_A32, THUMB, env->thumb);
+        flags = FIELD_DP32(flags, TBFLAG_A32, VECLEN, env->vfp.vec_len);
+        flags = FIELD_DP32(flags, TBFLAG_A32, VECSTRIDE, env->vfp.vec_stride);
+        flags = FIELD_DP32(flags, TBFLAG_A32, CONDEXEC, env->condexec_bits);
+        flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env));
+        flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env));
         if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30)
             || arm_el_is_aa64(env, 1)) {
-            flags |= ARM_TBFLAG_VFPEN_MASK;
+            flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1);
         }
-        flags |= (extract32(env->cp15.c15_cpar, 0, 2)
-                  << ARM_TBFLAG_XSCALE_CPAR_SHIFT);
+        flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar);
     }
 
-    flags |= (arm_to_core_mmu_idx(mmu_idx) << ARM_TBFLAG_MMUIDX_SHIFT);
+    flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx));
 
     /* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine
      * states defined in the ARM ARM for software singlestep:
@@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc,
      *     1            1       Active-not-pending
      */
     if (arm_singlestep_active(env)) {
-        flags |= ARM_TBFLAG_SS_ACTIVE_MASK;
+        flags = FIELD_DP32(flags, TBFLAG_ANY, SS_ACTIVE, 1);
         if (is_a64(env)) {
             if (env->pstate & PSTATE_SS) {
-                flags |= ARM_TBFLAG_PSTATE_SS_MASK;
+                flags = FIELD_DP32(flags, TBFLAG_ANY, PSTATE_SS, 1);
             }
         } else {
             if (env->uncached_cpsr & PSTATE_SS) {
-                flags |= ARM_TBFLAG_PSTATE_SS_MASK;
+                flags = FIELD_DP32(flags, TBFLAG_ANY, PSTATE_SS, 1);
             }
         }
     }
     if (arm_cpu_data_is_big_endian(env)) {
-        flags |= ARM_TBFLAG_BE_DATA_MASK;
+        flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1);
     }
-    flags |= fp_el << ARM_TBFLAG_FPEXC_EL_SHIFT;
+    flags = FIELD_DP32(flags, TBFLAG_ANY, FPEXC_EL, fp_el);
 
     if (arm_v7m_is_handler_mode(env)) {
-        flags |= ARM_TBFLAG_HANDLER_MASK;
+        flags = FIELD_DP32(flags, TBFLAG_A32, HANDLER, 1);
     }
 
     /* v8M always applies stack limit checks unless CCR.STKOFHFNMIGN is
@@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc,
         arm_feature(env, ARM_FEATURE_M) &&
         !((mmu_idx  & ARM_MMU_IDX_M_NEGPRI) &&
           (env->v7m.ccr[env->v7m.secure] & R_V7M_CCR_STKOFHFNMIGN_MASK))) {
-        flags |= ARM_TBFLAG_STACKCHECK_MASK;
+        flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1);
     }
 
     *pflags = flags;
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase,
     DisasContext *dc = container_of(dcbase, DisasContext, base);
     CPUARMState *env = cpu->env_ptr;
     ARMCPU *arm_cpu = arm_env_get_cpu(env);
-    int bound;
+    uint32_t tb_flags = dc->base.tb->flags;
+    int bound, core_mmu_idx;
 
     dc->isar = &arm_cpu->isar;
     dc->pc = dc->base.pc_first;
@@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase,
                                !arm_el_is_aa64(env, 3);
     dc->thumb = 0;
     dc->sctlr_b = 0;
-    dc->be_data = ARM_TBFLAG_BE_DATA(dc->base.tb->flags) ? MO_BE : MO_LE;
+    dc->be_data = FIELD_EX32(tb_flags, TBFLAG_ANY, BE_DATA) ? MO_BE : MO_LE;
     dc->condexec_mask = 0;
     dc->condexec_cond = 0;
-    dc->mmu_idx = core_to_arm_mmu_idx(env, ARM_TBFLAG_MMUIDX(dc->base.tb->flags));
-    dc->tbi0 = ARM_TBFLAG_TBI0(dc->base.tb->flags);
-    dc->tbi1 = ARM_TBFLAG_TBI1(dc->base.tb->flags);
+    core_mmu_idx = FIELD_EX32(tb_flags, TBFLAG_ANY, MMUIDX);
+    dc->mmu_idx = core_to_arm_mmu_idx(env, core_mmu_idx);
+    dc->tbi0 = FIELD_EX32(tb_flags, TBFLAG_A64, TBI0);
+    dc->tbi1 = FIELD_EX32(tb_flags, TBFLAG_A64, TBI1);
     dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx);
 #if !defined(CONFIG_USER_ONLY)
     dc->user = (dc->current_el == 0);
 #endif
-    dc->fp_excp_el = ARM_TBFLAG_FPEXC_EL(dc->base.tb->flags);
-    dc->sve_excp_el = ARM_TBFLAG_SVEEXC_EL(dc->base.tb->flags);
-    dc->sve_len = (ARM_TBFLAG_ZCR_LEN(dc->base.tb->flags) + 1) * 16;
+    dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL);
+    dc->sve_excp_el = FIELD_EX32(tb_flags, TBFLAG_A64, SVEEXC_EL);
+    dc->sve_len = (FIELD_EX32(tb_flags, TBFLAG_A64, ZCR_LEN) + 1) * 16;
     dc->vec_len = 0;
     dc->vec_stride = 0;
     dc->cp_regs = arm_cpu->cp_regs;
@@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase,
      *   emit code to generate a software step exception
      *   end the TB
      */
-    dc->ss_active = ARM_TBFLAG_SS_ACTIVE(dc->base.tb->flags);
-    dc->pstate_ss = ARM_TBFLAG_PSTATE_SS(dc->base.tb->flags);
+    dc->ss_active = FIELD_EX32(tb_flags, TBFLAG_ANY, SS_ACTIVE);
+    dc->pstate_ss = FIELD_EX32(tb_flags, TBFLAG_ANY, PSTATE_SS);
     dc->is_ldex = false;
     dc->ss_same_el = (arm_debug_target_el(env) == dc->current_el);
 
diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
     DisasContext *dc = container_of(dcbase, DisasContext, base);
     CPUARMState *env = cs->env_ptr;
     ARMCPU *cpu = arm_env_get_cpu(env);
+    uint32_t tb_flags = dc->base.tb->flags;
+    uint32_t condexec, core_mmu_idx;
 
     dc->isar = &cpu->isar;
     dc->pc = dc->base.pc_first;
@@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
      */
     dc->secure_routed_to_el3 = arm_feature(env, ARM_FEATURE_EL3) &&
                                !arm_el_is_aa64(env, 3);
-    dc->thumb = ARM_TBFLAG_THUMB(dc->base.tb->flags);
-    dc->sctlr_b = ARM_TBFLAG_SCTLR_B(dc->base.tb->flags);
-    dc->be_data = ARM_TBFLAG_BE_DATA(dc->base.tb->flags) ? MO_BE : MO_LE;
-    dc->condexec_mask = (ARM_TBFLAG_CONDEXEC(dc->base.tb->flags) & 0xf) << 1;
-    dc->condexec_cond = ARM_TBFLAG_CONDEXEC(dc->base.tb->flags) >> 4;
-    dc->mmu_idx = core_to_arm_mmu_idx(env, ARM_TBFLAG_MMUIDX(dc->base.tb->flags));
+    dc->thumb = FIELD_EX32(tb_flags, TBFLAG_A32, THUMB);
+    dc->sctlr_b = FIELD_EX32(tb_flags, TBFLAG_A32, SCTLR_B);
+    dc->be_data = FIELD_EX32(tb_flags, TBFLAG_ANY, BE_DATA) ? MO_BE : MO_LE;
+    condexec = FIELD_EX32(tb_flags, TBFLAG_A32, CONDEXEC);
+    dc->condexec_mask = (condexec & 0xf) << 1;
+    dc->condexec_cond = condexec >> 4;
+    core_mmu_idx = FIELD_EX32(tb_flags, TBFLAG_ANY, MMUIDX);
+    dc->mmu_idx = core_to_arm_mmu_idx(env, core_mmu_idx);
     dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx);
 #if !defined(CONFIG_USER_ONLY)
     dc->user = (dc->current_el == 0);
 #endif
-    dc->ns = ARM_TBFLAG_NS(dc->base.tb->flags);
-    dc->fp_excp_el = ARM_TBFLAG_FPEXC_EL(dc->base.tb->flags);
-    dc->vfp_enabled = ARM_TBFLAG_VFPEN(dc->base.tb->flags);
-    dc->vec_len = ARM_TBFLAG_VECLEN(dc->base.tb->flags);
-    dc->vec_stride = ARM_TBFLAG_VECSTRIDE(dc->base.tb->flags);
-    dc->c15_cpar = ARM_TBFLAG_XSCALE_CPAR(dc->base.tb->flags);
-    dc->v7m_handler_mode = ARM_TBFLAG_HANDLER(dc->base.tb->flags);
+    dc->ns = FIELD_EX32(tb_flags, TBFLAG_A32, NS);
+    dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL);
+    dc->vfp_enabled = FIELD_EX32(tb_flags, TBFLAG_A32, VFPEN);
+    dc->vec_len = FIELD_EX32(tb_flags, TBFLAG_A32, VECLEN);
+    dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE);
+    dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR);
+    dc->v7m_handler_mode = FIELD_EX32(tb_flags, TBFLAG_A32, HANDLER);
     dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) &&
         regime_is_secure(env, dc->mmu_idx);
-    dc->v8m_stackcheck = ARM_TBFLAG_STACKCHECK(dc->base.tb->flags);
+    dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK);
     dc->cp_regs = cpu->cp_regs;
     dc->features = env->features;
 
@@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
      *   emit code to generate a software step exception
      *   end the TB
      */
-    dc->ss_active = ARM_TBFLAG_SS_ACTIVE(dc->base.tb->flags);
-    dc->pstate_ss = ARM_TBFLAG_PSTATE_SS(dc->base.tb->flags);
+    dc->ss_active = FIELD_EX32(tb_flags, TBFLAG_ANY, SS_ACTIVE);
+    dc->pstate_ss = FIELD_EX32(tb_flags, TBFLAG_ANY, PSTATE_SS);
     dc->is_ldex = false;
     dc->ss_same_el = false; /* Can't be true since EL_d must be AArch64 */
 
@@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUState *cpu, TranslationBlock *tb)
     DisasContext dc;
     const TranslatorOps *ops = &arm_translator_ops;
 
-    if (ARM_TBFLAG_THUMB(tb->flags)) {
+    if (FIELD_EX32(tb->flags, TBFLAG_A32, THUMB)) {
         ops = &thumb_translator_ops;
     }
 #ifdef TARGET_AARCH64
-    if (ARM_TBFLAG_AARCH64_STATE(tb->flags)) {
+    if (FIELD_EX32(tb->flags, TBFLAG_ANY, AARCH64_STATE)) {
         ops = &aarch64_translator_ops;
     }
 #endif
-- 
2.19.2

From: Richard Henderson <richard.henderson@linaro.org>

While brk[ab] zeroing has a flags setting option, the merging variant
does not.  Retain the same argument structure, to share expansion but
force the flag zero and do not decode bit 22.

Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181226215003.31438-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/sve.decode | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/target/arm/sve.decode b/target/arm/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve.decode
+++ b/target/arm/sve.decode
@@ -XXX,XX +XXX,XX @@
 
 # Two operand with governing predicate, flags setting
 @pd_pg_pn_s     ........ . s:1 ...... .. pg:4 . rn:4 . rd:4     &rpr_s
+@pd_pg_pn_s0    ........ . .   ...... .. pg:4 . rn:4 . rd:4     &rpr_s s=0
 
 # Three operand with unused vector element size
 @rd_rn_rm_e0    ........ ... rm:5 ... ... rn:5 rd:5             &rrr_esz esz=0
@@ -XXX,XX +XXX,XX @@ BRKPB           00100101 0. 00 .... 11 .... 0 .... 1 ....       @pd_pg_pn_pm_s
 # SVE partition break condition
 BRKA_z          00100101 0. 01000001 .... 0 .... 0 ....         @pd_pg_pn_s
 BRKB_z          00100101 1. 01000001 .... 0 .... 0 ....         @pd_pg_pn_s
-BRKA_m          00100101 0. 01000001 .... 0 .... 1 ....         @pd_pg_pn_s
-BRKB_m          00100101 1. 01000001 .... 0 .... 1 ....         @pd_pg_pn_s
+BRKA_m          00100101 00 01000001 .... 0 .... 1 ....         @pd_pg_pn_s0
+BRKB_m          00100101 10 01000001 .... 0 .... 1 ....         @pd_pg_pn_s0
 
 # SVE propagate break to next partition
 BRKN            00100101 0. 01100001 .... 0 .... 0 ....         @pd_pg_pn_s
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

This commit adds the cpu-cluster type. It aims at gathering CPUs from
the same cluster in a machine.

For now it only has a `cluster-id` property.

Documentation in cluster.h written with the help of Peter Maydell.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181207090135.7651-2-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/cpu/Makefile.objs     |  2 +-
 include/hw/cpu/cluster.h | 58 ++++++++++++++++++++++++++++++++++++++++
 hw/cpu/cluster.c         | 50 ++++++++++++++++++++++++++++++++++
 MAINTAINERS              |  2 ++
 4 files changed, 111 insertions(+), 1 deletion(-)
 create mode 100644 include/hw/cpu/cluster.h
 create mode 100644 hw/cpu/cluster.c

diff --git a/hw/cpu/Makefile.objs b/hw/cpu/Makefile.objs
index XXXXXXX..XXXXXXX 100644
--- a/hw/cpu/Makefile.objs
+++ b/hw/cpu/Makefile.objs
@@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_ARM11MPCORE) += arm11mpcore.o
 obj-$(CONFIG_REALVIEW) += realview_mpcore.o
 obj-$(CONFIG_A9MPCORE) += a9mpcore.o
 obj-$(CONFIG_A15MPCORE) += a15mpcore.o
-common-obj-y += core.o
+common-obj-y += core.o cluster.o
diff --git a/include/hw/cpu/cluster.h b/include/hw/cpu/cluster.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/cpu/cluster.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * QEMU CPU cluster
+ *
+ * Copyright (c) 2018 GreenSocs SAS
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
+ */
+#ifndef HW_CPU_CLUSTER_H
+#define HW_CPU_CLUSTER_H
+
+#include "qemu/osdep.h"
+#include "hw/qdev.h"
+
+/*
+ * CPU Cluster type
+ *
+ * A cluster is a group of CPUs which are all identical and have the same view
+ * of the rest of the system. It is mainly an internal QEMU representation and
+ * does not necessarily match with the notion of clusters on the real hardware.
+ *
+ * If CPUs are not identical (for example, Cortex-A53 and Cortex-A57 CPUs in an
+ * Arm big.LITTLE system) they should be in different clusters. If the CPUs do
+ * not have the same view of memory (for example the main CPU and a management
+ * controller processor) they should be in different clusters.
+ */
+
+#define TYPE_CPU_CLUSTER "cpu-cluster"
+#define CPU_CLUSTER(obj) \
+    OBJECT_CHECK(CPUClusterState, (obj), TYPE_CPU_CLUSTER)
+
+/**
+ * CPUClusterState:
+ * @cluster_id: The cluster ID. This value is for internal use only and should
+ *   not be exposed directly to the user or to the guest.
+ *
+ * State of a CPU cluster.
+ */
+typedef struct CPUClusterState {
+    /*< private >*/
+    DeviceState parent_obj;
+
+    /*< public >*/
+    uint32_t cluster_id;
+} CPUClusterState;
+
+#endif
diff --git a/hw/cpu/cluster.c b/hw/cpu/cluster.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/cpu/cluster.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * QEMU CPU cluster
+ *
+ * Copyright (c) 2018 GreenSocs SAS
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
+ */
+
+#include "qemu/osdep.h"
+#include "hw/cpu/cluster.h"
+#include "qapi/error.h"
+#include "qemu/module.h"
+
+static Property cpu_cluster_properties[] = {
+    DEFINE_PROP_UINT32("cluster-id", CPUClusterState, cluster_id, 0),
+    DEFINE_PROP_END_OF_LIST()
+};
+
+static void cpu_cluster_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->props = cpu_cluster_properties;
+}
+
+static const TypeInfo cpu_cluster_type_info = {
+    .name = TYPE_CPU_CLUSTER,
+    .parent = TYPE_DEVICE,
+    .instance_size = sizeof(CPUClusterState),
+    .class_init = cpu_cluster_class_init,
+};
+
+static void cpu_cluster_register_types(void)
+{
+    type_register_static(&cpu_cluster_type_info);
+}
+
+type_init(cpu_cluster_register_types)
diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ M: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
 S: Supported
 F: hw/core/machine.c
 F: hw/core/null-machine.c
+F: hw/cpu/cluster.c
 F: include/hw/boards.h
+F: include/hw/cpu/cluster.h
 T: git https://github.com/ehabkost/qemu.git machine-next
 
 Xtensa Machines
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

Add a structure GDBProcess that represents processes from the GDB
semantic point of view.

CPUs can be split into different processes, by grouping them under
different cpu-cluster objects.  Each occurrence of a cpu-cluster object
implies the existence of the corresponding process in the GDB stub. The
GDB process ID is derived from the corresponding cluster ID as follows:

GDB PID = cluster ID + 1

This is because PIDs -1 and 0 are reserved in GDB and cannot be used by
processes.

A default process is created to handle CPUs that are not in a cluster.
This process gets the PID of the last process PID + 1.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181207090135.7651-3-luc.michel@greensocs.com
[PMM: fixed checkpatch nit about block comment style]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 gdbstub.c | 97 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)

diff --git a/gdbstub.c b/gdbstub.c
index XXXXXXX..XXXXXXX 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -XXX,XX +XXX,XX @@
 #include "chardev/char-fe.h"
 #include "sysemu/sysemu.h"
 #include "exec/gdbstub.h"
+#include "hw/cpu/cluster.h"
 #endif
 
 #define MAX_PACKET_LENGTH 4096
@@ -XXX,XX +XXX,XX @@ typedef struct GDBRegisterState {
     struct GDBRegisterState *next;
 } GDBRegisterState;
 
+typedef struct GDBProcess {
+    uint32_t pid;
+    bool attached;
+} GDBProcess;
+
 enum RSState {
     RS_INACTIVE,
     RS_IDLE,
@@ -XXX,XX +XXX,XX @@ typedef struct GDBState {
     CharBackend chr;
     Chardev *mon_chr;
 #endif
+    bool multiprocess;
+    GDBProcess *processes;
+    int process_num;
     char syscall_buf[256];
     gdb_syscall_complete_cb current_syscall_cb;
 } GDBState;
@@ -XXX,XX +XXX,XX @@ void gdb_exit(CPUArchState *env, int code)
 #endif
 }
 
+/*
+ * Create the process that will contain all the "orphan" CPUs (that are not
+ * part of a CPU cluster). Note that if this process contains no CPUs, it won't
+ * be attachable and thus will be invisible to the user.
+ */
+static void create_default_process(GDBState *s)
+{
+    GDBProcess *process;
+    int max_pid = 0;
+
+    if (s->process_num) {
+        max_pid = s->processes[s->process_num - 1].pid;
+    }
+
+    s->processes = g_renew(GDBProcess, s->processes, ++s->process_num);
+    process = &s->processes[s->process_num - 1];
+
+    /* We need an available PID slot for this process */
+    assert(max_pid < UINT32_MAX);
+
+    process->pid = max_pid + 1;
+    process->attached = false;
+}
+
 #ifdef CONFIG_USER_ONLY
 int
 gdb_handlesig(CPUState *cpu, int sig)
@@ -XXX,XX +XXX,XX @@ static bool gdb_accept(void)
     s = g_malloc0(sizeof(GDBState));
     s->c_cpu = first_cpu;
     s->g_cpu = first_cpu;
+    create_default_process(s);
     s->fd = fd;
     gdb_has_xml = false;
 
@@ -XXX,XX +XXX,XX @@ static const TypeInfo char_gdb_type_info = {
     .class_init = char_gdb_class_init,
 };
 
+static int find_cpu_clusters(Object *child, void *opaque)
+{
+    if (object_dynamic_cast(child, TYPE_CPU_CLUSTER)) {
+        GDBState *s = (GDBState *) opaque;
+        CPUClusterState *cluster = CPU_CLUSTER(child);
+        GDBProcess *process;
+
+        s->processes = g_renew(GDBProcess, s->processes, ++s->process_num);
+
+        process = &s->processes[s->process_num - 1];
+
+        /*
+         * GDB process IDs -1 and 0 are reserved. To avoid subtle errors at
+         * runtime, we enforce here that the machine does not use a cluster ID
+         * that would lead to PID 0.
+         */
+        assert(cluster->cluster_id != UINT32_MAX);
+        process->pid = cluster->cluster_id + 1;
+        process->attached = false;
+
+        return 0;
+    }
+
+    return object_child_foreach(child, find_cpu_clusters, opaque);
+}
+
+static int pid_order(const void *a, const void *b)
+{
+    GDBProcess *pa = (GDBProcess *) a;
+    GDBProcess *pb = (GDBProcess *) b;
+
+    if (pa->pid < pb->pid) {
+        return -1;
+    } else if (pa->pid > pb->pid) {
+        return 1;
+    } else {
+        return 0;
+    }
+}
+
+static void create_processes(GDBState *s)
+{
+    object_child_foreach(object_get_root(), find_cpu_clusters, s);
+
+    if (s->processes) {
+        /* Sort by PID */
+        qsort(s->processes, s->process_num, sizeof(s->processes[0]), pid_order);
+    }
+
+    create_default_process(s);
+}
+
+static void cleanup_processes(GDBState *s)
+{
+    g_free(s->processes);
+    s->process_num = 0;
+    s->processes = NULL;
+}
+
 int gdbserver_start(const char *device)
 {
     trace_gdbstub_op_start(device);
@@ -XXX,XX +XXX,XX @@ int gdbserver_start(const char *device)
     } else {
         qemu_chr_fe_deinit(&s->chr, true);
         mon_chr = s->mon_chr;
+        cleanup_processes(s);
         memset(s, 0, sizeof(GDBState));
         s->mon_chr = mon_chr;
     }
     s->c_cpu = first_cpu;
     s->g_cpu = first_cpu;
+
+    create_processes(s);
+
     if (chr) {
         qemu_chr_fe_init(&s->chr, chr, &error_abort);
         qemu_chr_fe_set_handlers(&s->chr, gdb_chr_can_receive, gdb_chr_receive,
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

The gdb_get_cpu_pid() function does the PID lookup for the given CPU. It
checks if the CPU is a direct child of a CPU cluster. If it is, the
returned PID is the cluster ID plus one (cluster IDs start at 0, GDB
PIDs at 1). When the CPU is not a child of such a container, the PID of
the default process is returned.

The gdb_fmt_thread_id() function generates the string to be used to identify
a given thread, in a response packet for the peer. This function
supports generating thread IDs when multiprocess mode is enabled (in the
form `p<pid>.<tid>').

Use them in the reply to a '?' request.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181207090135.7651-4-luc.michel@greensocs.com
[PMM: fixed checkpatch blockquote style nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 gdbstub.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 64 insertions(+), 2 deletions(-)

diff --git a/gdbstub.c b/gdbstub.c
index XXXXXXX..XXXXXXX 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -XXX,XX +XXX,XX @@ static int memtox(char *buf, const char *mem, int len)
     return p - buf;
 }
 
+static uint32_t gdb_get_cpu_pid(const GDBState *s, CPUState *cpu)
+{
+#ifndef CONFIG_USER_ONLY
+    gchar *path, *name = NULL;
+    Object *obj;
+    CPUClusterState *cluster;
+    uint32_t ret;
+
+    path = object_get_canonical_path(OBJECT(cpu));
+
+    if (path == NULL) {
+        /* Return the default process' PID */
+        ret = s->processes[s->process_num - 1].pid;
+        goto out;
+    }
+
+    name = object_get_canonical_path_component(OBJECT(cpu));
+    assert(name != NULL);
+
+    /*
+     * Retrieve the CPU parent path by removing the last '/' and the CPU name
+     * from the CPU canonical path.
+     */
+    path[strlen(path) - strlen(name) - 1] = '\0';
+
+    obj = object_resolve_path_type(path, TYPE_CPU_CLUSTER, NULL);
+
+    if (obj == NULL) {
+        /* Return the default process' PID */
+        ret = s->processes[s->process_num - 1].pid;
+        goto out;
+    }
+
+    cluster = CPU_CLUSTER(obj);
+    ret = cluster->cluster_id + 1;
+
+out:
+    g_free(name);
+    g_free(path);
+
+    return ret;
+
+#else
+    /* TODO: In user mode, we should use the task state PID */
+    return s->processes[s->process_num - 1].pid;
+#endif
+}
+
 static const char *get_feature_xml(const char *p, const char **newp,
                                    CPUClass *cc)
 {
@@ -XXX,XX +XXX,XX @@ static CPUState *find_cpu(uint32_t thread_id)
     return NULL;
 }
 
+static char *gdb_fmt_thread_id(const GDBState *s, CPUState *cpu,
+                           char *buf, size_t buf_size)
+{
+    if (s->multiprocess) {
+        snprintf(buf, buf_size, "p%02x.%02x",
+                 gdb_get_cpu_pid(s, cpu), cpu_gdb_index(cpu));
+    } else {
+        snprintf(buf, buf_size, "%02x", cpu_gdb_index(cpu));
+    }
+
+    return buf;
+}
+
 static int is_query_packet(const char *p, const char *query, char separator)
 {
     unsigned int query_len = strlen(query);
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
     int ch, reg_size, type, res;
     uint8_t mem_buf[MAX_PACKET_LENGTH];
     char buf[sizeof(mem_buf) + 1 /* trailing NUL */];
+    char thread_id[16];
     uint8_t *registers;
     target_ulong addr, len;
 
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
     switch(ch) {
     case '?':
         /* TODO: Make this return the correct value for user-mode.  */
-        snprintf(buf, sizeof(buf), "T%02xthread:%02x;", GDB_SIGNAL_TRAP,
-                 cpu_gdb_index(s->c_cpu));
+        snprintf(buf, sizeof(buf), "T%02xthread:%s;", GDB_SIGNAL_TRAP,
+                 gdb_fmt_thread_id(s, s->c_cpu, thread_id, sizeof(thread_id)));
         put_packet(s, buf);
         /* Remove all the breakpoints when this query is issued,
          * because gdb is doing and initial connect and the state
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

Add a couple of helper functions to cope with GDB threads and processes.

The gdb_get_process() function looks for a process given a pid.

The gdb_get_cpu() function returns the CPU corresponding to the (pid,
tid) pair given as parameters.

The read_thread_id() function parses the thread-id sent by the peer.
This function supports the multiprocess extension thread-id syntax.  The
return value specifies if the parsing failed, or if a special case was
encountered (all processes or all threads).

Use them in 'H' and 'T' packets handling to support the multiprocess
extension.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-5-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 gdbstub.c | 154 +++++++++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 136 insertions(+), 18 deletions(-)

diff --git a/gdbstub.c b/gdbstub.c
index XXXXXXX..XXXXXXX 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -XXX,XX +XXX,XX @@ out:
 #endif
 }
 
+static GDBProcess *gdb_get_process(const GDBState *s, uint32_t pid)
+{
+    int i;
+
+    if (!pid) {
+        /* 0 means any process, we take the first one */
+        return &s->processes[0];
+    }
+
+    for (i = 0; i < s->process_num; i++) {
+        if (s->processes[i].pid == pid) {
+            return &s->processes[i];
+        }
+    }
+
+    return NULL;
+}
+
+static GDBProcess *gdb_get_cpu_process(const GDBState *s, CPUState *cpu)
+{
+    return gdb_get_process(s, gdb_get_cpu_pid(s, cpu));
+}
+
+static CPUState *find_cpu(uint32_t thread_id)
+{
+    CPUState *cpu;
+
+    CPU_FOREACH(cpu) {
+        if (cpu_gdb_index(cpu) == thread_id) {
+            return cpu;
+        }
+    }
+
+    return NULL;
+}
+
+static CPUState *gdb_get_cpu(const GDBState *s, uint32_t pid, uint32_t tid)
+{
+    GDBProcess *process;
+    CPUState *cpu;
+
+    if (!tid) {
+        /* 0 means any thread, we take the first one */
+        tid = 1;
+    }
+
+    cpu = find_cpu(tid);
+
+    if (cpu == NULL) {
+        return NULL;
+    }
+
+    process = gdb_get_cpu_process(s, cpu);
+
+    if (process->pid != pid) {
+        return NULL;
+    }
+
+    if (!process->attached) {
+        return NULL;
+    }
+
+    return cpu;
+}
+
 static const char *get_feature_xml(const char *p, const char **newp,
                                    CPUClass *cc)
 {
@@ -XXX,XX +XXX,XX @@ static void gdb_set_cpu_pc(GDBState *s, target_ulong pc)
     cpu_set_pc(cpu, pc);
 }
 
-static CPUState *find_cpu(uint32_t thread_id)
-{
-    CPUState *cpu;
-
-    CPU_FOREACH(cpu) {
-        if (cpu_gdb_index(cpu) == thread_id) {
-            return cpu;
-        }
-    }
-
-    return NULL;
-}
-
 static char *gdb_fmt_thread_id(const GDBState *s, CPUState *cpu,
                            char *buf, size_t buf_size)
 {
@@ -XXX,XX +XXX,XX @@ static char *gdb_fmt_thread_id(const GDBState *s, CPUState *cpu,
     return buf;
 }
 
+typedef enum GDBThreadIdKind {
+    GDB_ONE_THREAD = 0,
+    GDB_ALL_THREADS,     /* One process, all threads */
+    GDB_ALL_PROCESSES,
+    GDB_READ_THREAD_ERR
+} GDBThreadIdKind;
+
+static GDBThreadIdKind read_thread_id(const char *buf, const char **end_buf,
+                                      uint32_t *pid, uint32_t *tid)
+{
+    unsigned long p, t;
+    int ret;
+
+    if (*buf == 'p') {
+        buf++;
+        ret = qemu_strtoul(buf, &buf, 16, &p);
+
+        if (ret) {
+            return GDB_READ_THREAD_ERR;
+        }
+
+        /* Skip '.' */
+        buf++;
+    } else {
+        p = 1;
+    }
+
+    ret = qemu_strtoul(buf, &buf, 16, &t);
+
+    if (ret) {
+        return GDB_READ_THREAD_ERR;
+    }
+
+    *end_buf = buf;
+
+    if (p == -1) {
+        return GDB_ALL_PROCESSES;
+    }
+
+    if (pid) {
+        *pid = p;
+    }
+
+    if (t == -1) {
+        return GDB_ALL_THREADS;
+    }
+
+    if (tid) {
+        *tid = t;
+    }
+
+    return GDB_ONE_THREAD;
+}
+
 static int is_query_packet(const char *p, const char *query, char separator)
 {
     unsigned int query_len = strlen(query);
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
     CPUClass *cc;
     const char *p;
     uint32_t thread;
+    uint32_t pid, tid;
     int ch, reg_size, type, res;
     uint8_t mem_buf[MAX_PACKET_LENGTH];
     char buf[sizeof(mem_buf) + 1 /* trailing NUL */];
     char thread_id[16];
     uint8_t *registers;
     target_ulong addr, len;
+    GDBThreadIdKind thread_kind;
 
     trace_gdbstub_io_command(line_buf);
 
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
         break;
     case 'H':
         type = *p++;
-        thread = strtoull(p, (char **)&p, 16);
-        if (thread == -1 || thread == 0) {
+
+        thread_kind = read_thread_id(p, &p, &pid, &tid);
+        if (thread_kind == GDB_READ_THREAD_ERR) {
+            put_packet(s, "E22");
+            break;
+        }
+
+        if (thread_kind != GDB_ONE_THREAD) {
             put_packet(s, "OK");
             break;
         }
-        cpu = find_cpu(thread);
+        cpu = gdb_get_cpu(s, pid, tid);
         if (cpu == NULL) {
             put_packet(s, "E22");
             break;
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
         }
         break;
     case 'T':
-        thread = strtoull(p, (char **)&p, 16);
-        cpu = find_cpu(thread);
+        thread_kind = read_thread_id(p, &p, &pid, &tid);
+        if (thread_kind == GDB_READ_THREAD_ERR) {
+            put_packet(s, "E22");
+            break;
+        }
+        cpu = gdb_get_cpu(s, pid, tid);
 
         if (cpu != NULL) {
             put_packet(s, "OK");
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

Add the gdb_first_attached_cpu() and gdb_next_attached_cpu() to iterate
over all the CPUs in currently attached processes.

Add the gdb_first_cpu_in_process() and gdb_next_cpu_in_process() to
iterate over CPUs of a given process.

Use them to add multiprocess extension support to vCont packets.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-6-luc.michel@greensocs.com
[PMM: corrected checkpatch comment style nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 gdbstub.c | 115 +++++++++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 100 insertions(+), 15 deletions(-)

diff --git a/gdbstub.c b/gdbstub.c
index XXXXXXX..XXXXXXX 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -XXX,XX +XXX,XX @@ static CPUState *find_cpu(uint32_t thread_id)
     return NULL;
 }
 
+static CPUState *get_first_cpu_in_process(const GDBState *s,
+                                          GDBProcess *process)
+{
+    CPUState *cpu;
+
+    CPU_FOREACH(cpu) {
+        if (gdb_get_cpu_pid(s, cpu) == process->pid) {
+            return cpu;
+        }
+    }
+
+    return NULL;
+}
+
+static CPUState *gdb_next_cpu_in_process(const GDBState *s, CPUState *cpu)
+{
+    uint32_t pid = gdb_get_cpu_pid(s, cpu);
+    cpu = CPU_NEXT(cpu);
+
+    while (cpu) {
+        if (gdb_get_cpu_pid(s, cpu) == pid) {
+            break;
+        }
+
+        cpu = CPU_NEXT(cpu);
+    }
+
+    return cpu;
+}
+
 static CPUState *gdb_get_cpu(const GDBState *s, uint32_t pid, uint32_t tid)
 {
     GDBProcess *process;
@@ -XXX,XX +XXX,XX @@ static CPUState *gdb_get_cpu(const GDBState *s, uint32_t pid, uint32_t tid)
     return cpu;
 }
 
+/* Return the cpu following @cpu, while ignoring unattached processes. */
+static CPUState *gdb_next_attached_cpu(const GDBState *s, CPUState *cpu)
+{
+    cpu = CPU_NEXT(cpu);
+
+    while (cpu) {
+        if (gdb_get_cpu_process(s, cpu)->attached) {
+            break;
+        }
+
+        cpu = CPU_NEXT(cpu);
+    }
+
+    return cpu;
+}
+
+/* Return the first attached cpu */
+static CPUState *gdb_first_attached_cpu(const GDBState *s)
+{
+    CPUState *cpu = first_cpu;
+    GDBProcess *process = gdb_get_cpu_process(s, cpu);
+
+    if (!process->attached) {
+        return gdb_next_attached_cpu(s, cpu);
+    }
+
+    return cpu;
+}
+
 static const char *get_feature_xml(const char *p, const char **newp,
                                    CPUClass *cc)
 {
@@ -XXX,XX +XXX,XX @@ static int is_query_packet(const char *p, const char *query, char separator)
  */
 static int gdb_handle_vcont(GDBState *s, const char *p)
 {
-    int res, idx, signal = 0;
+    int res, signal = 0;
     char cur_action;
     char *newstates;
     unsigned long tmp;
+    uint32_t pid, tid;
+    GDBProcess *process;
     CPUState *cpu;
 #ifdef CONFIG_USER_ONLY
     int max_cpus = 1; /* global variable max_cpus exists only in system mode */
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_vcont(GDBState *s, const char *p)
             res = -ENOTSUP;
             goto out;
         }
-        /* thread specification. special values: (none), -1 = all; 0 = any */
-        if ((p[0] == ':' && p[1] == '-' && p[2] == '1') || (p[0] != ':')) {
-            if (*p == ':') {
-                p += 3;
-            }
-            for (idx = 0; idx < max_cpus; idx++) {
-                if (newstates[idx] == 1) {
-                    newstates[idx] = cur_action;
+
+        if (*p++ != ':') {
+            res = -ENOTSUP;
+            goto out;
+        }
+
+        switch (read_thread_id(p, &p, &pid, &tid)) {
+        case GDB_READ_THREAD_ERR:
+            res = -EINVAL;
+            goto out;
+
+        case GDB_ALL_PROCESSES:
+            cpu = gdb_first_attached_cpu(s);
+            while (cpu) {
+                if (newstates[cpu->cpu_index] == 1) {
+                    newstates[cpu->cpu_index] = cur_action;
                 }
+
+                cpu = gdb_next_attached_cpu(s, cpu);
             }
-        } else if (*p == ':') {
-            p++;
-            res = qemu_strtoul(p, &p, 16, &tmp);
-            if (res) {
+            break;
+
+        case GDB_ALL_THREADS:
+            process = gdb_get_process(s, pid);
+
+            if (!process->attached) {
+                res = -EINVAL;
                 goto out;
             }
 
-            /* 0 means any thread, so we pick the first valid CPU */
-            cpu = tmp ? find_cpu(tmp) : first_cpu;
+            cpu = get_first_cpu_in_process(s, process);
+            while (cpu) {
+                if (newstates[cpu->cpu_index] == 1) {
+                    newstates[cpu->cpu_index] = cur_action;
+                }
+
+                cpu = gdb_next_cpu_in_process(s, cpu);
+            }
+            break;
+
+        case GDB_ONE_THREAD:
+            cpu = gdb_get_cpu(s, pid, tid);
 
             /* invalid CPU/thread specified */
             if (!cpu) {
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_vcont(GDBState *s, const char *p)
             if (newstates[cpu->cpu_index] == 1) {
                 newstates[cpu->cpu_index] = cur_action;
             }
+            break;
         }
     }
     s->signal = signal;
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

Change the sC packet handling to support the multiprocess extension.
Instead of returning the first thread, we return the first thread of the
current process.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181207090135.7651-7-luc.michel@greensocs.com
[PMM: corrected checkpatch comment style nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 gdbstub.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/gdbstub.c b/gdbstub.c
index XXXXXXX..XXXXXXX 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
             put_packet(s, "OK");
             break;
         } else if (strcmp(p,"C") == 0) {
-            /* "Current thread" remains vague in the spec, so always return
-             *  the first CPU (gdb returns the first thread). */
-            put_packet(s, "QC1");
+            /*
+             * "Current thread" remains vague in the spec, so always return
+             * the first thread of the current process (gdb returns the
+             * first thread).
+             */
+            cpu = get_first_cpu_in_process(s, gdb_get_cpu_process(s, s->g_cpu));
+            snprintf(buf, sizeof(buf), "QC%s",
+                     gdb_fmt_thread_id(s, cpu, thread_id, sizeof(thread_id)));
+            put_packet(s, buf);
             break;
         } else if (strcmp(p,"fThreadInfo") == 0) {
             s->query_cpu = first_cpu;
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

Change the thread info related packets handling to support multiprocess
extension.

Add the CPUs class name in the extra info to help differentiate
them in multiprocess mode.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-8-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 gdbstub.c | 37 +++++++++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 10 deletions(-)

diff --git a/gdbstub.c b/gdbstub.c
index XXXXXXX..XXXXXXX 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
     CPUState *cpu;
     CPUClass *cc;
     const char *p;
-    uint32_t thread;
     uint32_t pid, tid;
     int ch, reg_size, type, res;
     uint8_t mem_buf[MAX_PACKET_LENGTH];
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
             put_packet(s, buf);
             break;
         } else if (strcmp(p,"fThreadInfo") == 0) {
-            s->query_cpu = first_cpu;
+            s->query_cpu = gdb_first_attached_cpu(s);
             goto report_cpuinfo;
         } else if (strcmp(p,"sThreadInfo") == 0) {
         report_cpuinfo:
             if (s->query_cpu) {
-                snprintf(buf, sizeof(buf), "m%x", cpu_gdb_index(s->query_cpu));
+                snprintf(buf, sizeof(buf), "m%s",
+                         gdb_fmt_thread_id(s, s->query_cpu,
+                                       thread_id, sizeof(thread_id)));
                 put_packet(s, buf);
-                s->query_cpu = CPU_NEXT(s->query_cpu);
+                s->query_cpu = gdb_next_attached_cpu(s, s->query_cpu);
             } else
                 put_packet(s, "l");
             break;
         } else if (strncmp(p,"ThreadExtraInfo,", 16) == 0) {
-            thread = strtoull(p+16, (char **)&p, 16);
-            cpu = find_cpu(thread);
+            if (read_thread_id(p + 16, &p, &pid, &tid) == GDB_READ_THREAD_ERR) {
+                put_packet(s, "E22");
+                break;
+            }
+            cpu = gdb_get_cpu(s, pid, tid);
             if (cpu != NULL) {
                 cpu_synchronize_state(cpu);
-                /* memtohex() doubles the required space */
-                len = snprintf((char *)mem_buf, sizeof(buf) / 2,
-                               "CPU#%d [%s]", cpu->cpu_index,
-                               cpu->halted ? "halted " : "running");
+
+                if (s->multiprocess && (s->process_num > 1)) {
+                    /* Print the CPU model and name in multiprocess mode */
+                    ObjectClass *oc = object_get_class(OBJECT(cpu));
+                    const char *cpu_model = object_class_get_name(oc);
+                    char *cpu_name =
+                        object_get_canonical_path_component(OBJECT(cpu));
+                    len = snprintf((char *)mem_buf, sizeof(buf) / 2,
+                                   "%s %s [%s]", cpu_model, cpu_name,
+                                   cpu->halted ? "halted " : "running");
+                    g_free(cpu_name);
+                } else {
+                    /* memtohex() doubles the required space */
+                    len = snprintf((char *)mem_buf, sizeof(buf) / 2,
+                                   "CPU#%d [%s]", cpu->cpu_index,
+                                   cpu->halted ? "halted " : "running");
+                }
                 trace_gdbstub_op_extra_info((char *)mem_buf);
                 memtohex(buf, mem_buf, len);
                 put_packet(s, buf);
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

Change the Xfer:features:read: packet handling to support the
multiprocess extension. This packet is used to request the XML
description of the CPU. In multiprocess mode, different descriptions can
be sent for different processes.

This function now takes the process to send the description for as a
parameter, and use a buffer in the process structure to store the
generated description.

It takes the first CPU of the process to generate the description.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-9-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 gdbstub.c | 52 ++++++++++++++++++++++++++++++----------------------
 1 file changed, 30 insertions(+), 22 deletions(-)

diff --git a/gdbstub.c b/gdbstub.c
index XXXXXXX..XXXXXXX 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -XXX,XX +XXX,XX @@ typedef struct GDBRegisterState {
 typedef struct GDBProcess {
     uint32_t pid;
     bool attached;
+
+    char target_xml[1024];
 } GDBProcess;
 
 enum RSState {
@@ -XXX,XX +XXX,XX @@ static CPUState *gdb_first_attached_cpu(const GDBState *s)
     return cpu;
 }
 
-static const char *get_feature_xml(const char *p, const char **newp,
-                                   CPUClass *cc)
+static const char *get_feature_xml(const GDBState *s, const char *p,
+                                   const char **newp, GDBProcess *process)
 {
     size_t len;
     int i;
     const char *name;
-    static char target_xml[1024];
+    CPUState *cpu = get_first_cpu_in_process(s, process);
+    CPUClass *cc = CPU_GET_CLASS(cpu);
 
     len = 0;
     while (p[len] && p[len] != ':')
@@ -XXX,XX +XXX,XX @@ static const char *get_feature_xml(const char *p, const char **newp,
 
     name = NULL;
     if (strncmp(p, "target.xml", len) == 0) {
-        /* Generate the XML description for this CPU.  */
-        if (!target_xml[0]) {
-            GDBRegisterState *r;
-            CPUState *cpu = first_cpu;
+        char *buf = process->target_xml;
+        const size_t buf_sz = sizeof(process->target_xml);
 
-            pstrcat(target_xml, sizeof(target_xml),
+        /* Generate the XML description for this CPU.  */
+        if (!buf[0]) {
+            GDBRegisterState *r;
+
+            pstrcat(buf, buf_sz,
                     "<?xml version=\"1.0\"?>"
                     "<!DOCTYPE target SYSTEM \"gdb-target.dtd\">"
                     "<target>");
             if (cc->gdb_arch_name) {
                 gchar *arch = cc->gdb_arch_name(cpu);
-                pstrcat(target_xml, sizeof(target_xml), "<architecture>");
-                pstrcat(target_xml, sizeof(target_xml), arch);
-                pstrcat(target_xml, sizeof(target_xml), "</architecture>");
+                pstrcat(buf, buf_sz, "<architecture>");
+                pstrcat(buf, buf_sz, arch);
+                pstrcat(buf, buf_sz, "</architecture>");
                 g_free(arch);
             }
-            pstrcat(target_xml, sizeof(target_xml), "<xi:include href=\"");
-            pstrcat(target_xml, sizeof(target_xml), cc->gdb_core_xml_file);
-            pstrcat(target_xml, sizeof(target_xml), "\"/>");
+            pstrcat(buf, buf_sz, "<xi:include href=\"");
+            pstrcat(buf, buf_sz, cc->gdb_core_xml_file);
+            pstrcat(buf, buf_sz, "\"/>");
             for (r = cpu->gdb_regs; r; r = r->next) {
-                pstrcat(target_xml, sizeof(target_xml), "<xi:include href=\"");
-                pstrcat(target_xml, sizeof(target_xml), r->xml);
-                pstrcat(target_xml, sizeof(target_xml), "\"/>");
+                pstrcat(buf, buf_sz, "<xi:include href=\"");
+                pstrcat(buf, buf_sz, r->xml);
+                pstrcat(buf, buf_sz, "\"/>");
             }
-            pstrcat(target_xml, sizeof(target_xml), "</target>");
+            pstrcat(buf, buf_sz, "</target>");
         }
-        return target_xml;
+        return buf;
     }
     if (cc->gdb_get_dynamic_xml) {
-        CPUState *cpu = first_cpu;
         char *xmlname = g_strndup(p, len);
         const char *xml = cc->gdb_get_dynamic_xml(cpu, xmlname);
 
@@ -XXX,XX +XXX,XX @@ out:
 static int gdb_handle_packet(GDBState *s, const char *line_buf)
 {
     CPUState *cpu;
+    GDBProcess *process;
     CPUClass *cc;
     const char *p;
     uint32_t pid, tid;
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
             const char *xml;
             target_ulong total_len;
 
-            cc = CPU_GET_CLASS(first_cpu);
+            process = gdb_get_cpu_process(s, s->g_cpu);
+            cc = CPU_GET_CLASS(s->g_cpu);
             if (cc->gdb_core_xml_file == NULL) {
                 goto unknown_command;
             }
 
             gdb_has_xml = true;
             p += 19;
-            xml = get_feature_xml(p, &p, cc);
+            xml = get_feature_xml(s, p, &p, process);
             if (!xml) {
                 snprintf(buf, sizeof(buf), "E00");
                 put_packet(s, buf);
@@ -XXX,XX +XXX,XX @@ static void create_default_process(GDBState *s)
 
     process->pid = max_pid + 1;
     process->attached = false;
+    process->target_xml[0] = '\0';
 }
 
 #ifdef CONFIG_USER_ONLY
@@ -XXX,XX +XXX,XX @@ static int find_cpu_clusters(Object *child, void *opaque)
         assert(cluster->cluster_id != UINT32_MAX);
         process->pid = cluster->cluster_id + 1;
         process->attached = false;
+        process->target_xml[0] = '\0';
 
         return 0;
     }
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

Add support for multiprocess extension in gdb_vm_state_change()
function.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-10-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 gdbstub.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/gdbstub.c b/gdbstub.c
index XXXXXXX..XXXXXXX 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -XXX,XX +XXX,XX @@ static void gdb_vm_state_change(void *opaque, int running, RunState state)
     GDBState *s = gdbserver_state;
     CPUState *cpu = s->c_cpu;
     char buf[256];
+    char thread_id[16];
     const char *type;
     int ret;
 
@@ -XXX,XX +XXX,XX @@ static void gdb_vm_state_change(void *opaque, int running, RunState state)
         put_packet(s, s->syscall_buf);
         return;
     }
+
+    if (cpu == NULL) {
+        /* No process attached */
+        return;
+    }
+
+    gdb_fmt_thread_id(s, cpu, thread_id, sizeof(thread_id));
+
     switch (state) {
     case RUN_STATE_DEBUG:
         if (cpu->watchpoint_hit) {
@@ -XXX,XX +XXX,XX @@ static void gdb_vm_state_change(void *opaque, int running, RunState state)
             trace_gdbstub_hit_watchpoint(type, cpu_gdb_index(cpu),
                     (target_ulong)cpu->watchpoint_hit->vaddr);
             snprintf(buf, sizeof(buf),
-                     "T%02xthread:%02x;%swatch:" TARGET_FMT_lx ";",
-                     GDB_SIGNAL_TRAP, cpu_gdb_index(cpu), type,
+                     "T%02xthread:%s;%swatch:" TARGET_FMT_lx ";",
+                     GDB_SIGNAL_TRAP, thread_id, type,
                      (target_ulong)cpu->watchpoint_hit->vaddr);
             cpu->watchpoint_hit = NULL;
             goto send_packet;
@@ -XXX,XX +XXX,XX @@ static void gdb_vm_state_change(void *opaque, int running, RunState state)
         break;
     }
     gdb_set_stop_cpu(cpu);
-    snprintf(buf, sizeof(buf), "T%02xthread:%02x;", ret, cpu_gdb_index(cpu));
+    snprintf(buf, sizeof(buf), "T%02xthread:%s;", ret, thread_id);
 
 send_packet:
     put_packet(s, buf);
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

'D' packets are used by GDB to detach from a process. In multiprocess
mode, the PID to detach from is sent in the request.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-11-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 gdbstub.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 53 insertions(+), 7 deletions(-)

diff --git a/gdbstub.c b/gdbstub.c
index XXXXXXX..XXXXXXX 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -XXX,XX +XXX,XX @@ static int gdb_breakpoint_remove(target_ulong addr, target_ulong len, int type)
     }
 }
 
+static inline void gdb_cpu_breakpoint_remove_all(CPUState *cpu)
+{
+    cpu_breakpoint_remove_all(cpu, BP_GDB);
+#ifndef CONFIG_USER_ONLY
+    cpu_watchpoint_remove_all(cpu, BP_GDB);
+#endif
+}
+
+static void gdb_process_breakpoint_remove_all(const GDBState *s, GDBProcess *p)
+{
+    CPUState *cpu = get_first_cpu_in_process(s, p);
+
+    while (cpu) {
+        gdb_cpu_breakpoint_remove_all(cpu);
+        cpu = gdb_next_cpu_in_process(s, cpu);
+    }
+}
+
 static void gdb_breakpoint_remove_all(void)
 {
     CPUState *cpu;
@@ -XXX,XX +XXX,XX @@ static void gdb_breakpoint_remove_all(void)
     }
 
     CPU_FOREACH(cpu) {
-        cpu_breakpoint_remove_all(cpu, BP_GDB);
-#ifndef CONFIG_USER_ONLY
-        cpu_watchpoint_remove_all(cpu, BP_GDB);
-#endif
+        gdb_cpu_breakpoint_remove_all(cpu);
     }
 }
 
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
         exit(0);
     case 'D':
         /* Detach packet */
-        gdb_breakpoint_remove_all();
-        gdb_syscall_mode = GDB_SYS_DISABLED;
-        gdb_continue(s);
+        pid = 1;
+
+        if (s->multiprocess) {
+            unsigned long lpid;
+            if (*p != ';') {
+                put_packet(s, "E22");
+                break;
+            }
+
+            if (qemu_strtoul(p + 1, &p, 16, &lpid)) {
+                put_packet(s, "E22");
+                break;
+            }
+
+            pid = lpid;
+        }
+
+        process = gdb_get_process(s, pid);
+        gdb_process_breakpoint_remove_all(s, process);
+        process->attached = false;
+
+        if (pid == gdb_get_cpu_pid(s, s->c_cpu)) {
+            s->c_cpu = gdb_first_attached_cpu(s);
+        }
+
+        if (pid == gdb_get_cpu_pid(s, s->g_cpu)) {
+            s->g_cpu = gdb_first_attached_cpu(s);
+        }
+
+        if (s->c_cpu == NULL) {
+            /* No more process attached */
+            gdb_syscall_mode = GDB_SYS_DISABLED;
+            gdb_continue(s);
+        }
         put_packet(s, "OK");
         break;
     case 's':
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

Add support for the vAttach packets. In multiprocess mode, GDB sends
them to attach to additional processes.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181207090135.7651-13-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 gdbstub.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/gdbstub.c b/gdbstub.c
index XXXXXXX..XXXXXXX 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
                 goto unknown_command;
             }
             break;
+        } else if (strncmp(p, "Attach;", 7) == 0) {
+            unsigned long pid;
+
+            p += 7;
+
+            if (qemu_strtoul(p, &p, 16, &pid)) {
+                put_packet(s, "E22");
+                break;
+            }
+
+            process = gdb_get_process(s, pid);
+
+            if (process == NULL) {
+                put_packet(s, "E22");
+                break;
+            }
+
+            cpu = get_first_cpu_in_process(s, process);
+
+            if (cpu == NULL) {
+                /* Refuse to attach an empty process */
+                put_packet(s, "E22");
+                break;
+            }
+
+            process->attached = true;
+
+            s->g_cpu = cpu;
+            s->c_cpu = cpu;
+
+            snprintf(buf, sizeof(buf), "T%02xthread:%s;", GDB_SIGNAL_TRAP,
+                     gdb_fmt_thread_id(s, cpu, thread_id, sizeof(thread_id)));
+
+            put_packet(s, buf);
+            break;
         } else {
             goto unknown_command;
         }
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

When a new connection is established, we set the first process to be
attached, and the others detached. The first CPU of the first process
is selected as the current CPU.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181207090135.7651-14-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 gdbstub.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/gdbstub.c b/gdbstub.c
index XXXXXXX..XXXXXXX 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -XXX,XX +XXX,XX @@ static bool gdb_accept(void)
     }
 
     s = g_malloc0(sizeof(GDBState));
-    s->c_cpu = first_cpu;
-    s->g_cpu = first_cpu;
     create_default_process(s);
+    s->processes[0].attached = true;
+    s->c_cpu = gdb_first_attached_cpu(s);
+    s->g_cpu = s->c_cpu;
     s->fd = fd;
     gdb_has_xml = false;
 
@@ -XXX,XX +XXX,XX @@ static void gdb_chr_receive(void *opaque, const uint8_t *buf, int size)
 
 static void gdb_chr_event(void *opaque, int event)
 {
+    int i;
+    GDBState *s = (GDBState *) opaque;
+
     switch (event) {
     case CHR_EVENT_OPENED:
+        /* Start with first process attached, others detached */
+        for (i = 0; i < s->process_num; i++) {
+            s->processes[i].attached = !i;
+        }
+
+        s->c_cpu = gdb_first_attached_cpu(s);
+        s->g_cpu = s->c_cpu;
+
         vm_stop(RUN_STATE_PAUSED);
         gdb_has_xml = false;
         break;
@@ -XXX,XX +XXX,XX @@ int gdbserver_start(const char *device)
         memset(s, 0, sizeof(GDBState));
         s->mon_chr = mon_chr;
     }
-    s->c_cpu = first_cpu;
-    s->g_cpu = first_cpu;
 
     create_processes(s);
 
     if (chr) {
         qemu_chr_fe_init(&s->chr, chr, &error_abort);
         qemu_chr_fe_set_handlers(&s->chr, gdb_chr_can_receive, gdb_chr_receive,
-                                 gdb_chr_event, NULL, NULL, NULL, true);
+                                 gdb_chr_event, NULL, s, NULL, true);
     }
     s->state = chr ? RS_IDLE : RS_INACTIVE;
     s->mon_chr = mon_chr;
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

When gdb_set_stop_cpu() is called with a CPU associated to a process
currently not attached by the GDB client, return without modifying the
stop CPU. Otherwise, GDB gets confused if it receives packets with a
thread-id it does not know about.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181207090135.7651-15-luc.michel@greensocs.com
[PMM: fix checkpatch comment style nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 gdbstub.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/gdbstub.c b/gdbstub.c
index XXXXXXX..XXXXXXX 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
 
 void gdb_set_stop_cpu(CPUState *cpu)
 {
+    GDBProcess *p = gdb_get_cpu_process(gdbserver_state, cpu);
+
+    if (!p->attached) {
+        /*
+         * Having a stop CPU corresponding to a process that is not attached
+         * confuses GDB. So we ignore the request.
+         */
+        return;
+    }
+
     gdbserver_state->c_cpu = cpu;
     gdbserver_state->g_cpu = cpu;
 }
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

Add multiprocess extension support by enabling multiprocess mode when
the peer requests it, and by replying that we actually support it in the
qSupported reply packet.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181207090135.7651-16-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 gdbstub.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/gdbstub.c b/gdbstub.c
index XXXXXXX..XXXXXXX 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -XXX,XX +XXX,XX @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
             if (cc->gdb_core_xml_file != NULL) {
                 pstrcat(buf, sizeof(buf), ";qXfer:features:read+");
             }
+
+            if (strstr(p, "multiprocess+")) {
+                s->multiprocess = true;
+            }
+            pstrcat(buf, sizeof(buf), ";multiprocess+");
+
             put_packet(s, buf);
             break;
         }
-- 
2.19.2

From: Luc Michel <luc.michel@greensocs.com>

Create two separate CPU clusters for APUs and RPUs.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-17-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/xlnx-zynqmp.h |  3 +++
 hw/arm/xlnx-zynqmp.c         | 23 +++++++++++++++++++----
 2 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/xlnx-zynqmp.h
+++ b/include/hw/arm/xlnx-zynqmp.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/display/xlnx_dp.h"
 #include "hw/intc/xlnx-zynqmp-ipi.h"
 #include "hw/timer/xlnx-zynqmp-rtc.h"
+#include "hw/cpu/cluster.h"
 
 #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp"
 #define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \
@@ -XXX,XX +XXX,XX @@ typedef struct XlnxZynqMPState {
     DeviceState parent_obj;
 
     /*< public >*/
+    CPUClusterState apu_cluster;
+    CPUClusterState rpu_cluster;
     ARMCPU apu_cpu[XLNX_ZYNQMP_NUM_APU_CPUS];
     ARMCPU rpu_cpu[XLNX_ZYNQMP_NUM_RPU_CPUS];
     GICState gic;
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_create_rpu(XlnxZynqMPState *s, const char *boot_cpu,
     int i;
     int num_rpus = MIN(smp_cpus - XLNX_ZYNQMP_NUM_APU_CPUS, XLNX_ZYNQMP_NUM_RPU_CPUS);
 
+    object_initialize_child(OBJECT(s), "rpu-cluster", &s->rpu_cluster,
+                            sizeof(s->rpu_cluster), TYPE_CPU_CLUSTER,
+                            &error_abort, NULL);
+    qdev_prop_set_uint32(DEVICE(&s->rpu_cluster), "cluster-id", 1);
+
+    qdev_init_nofail(DEVICE(&s->rpu_cluster));
+
     for (i = 0; i < num_rpus; i++) {
         char *name;
 
         object_initialize(&s->rpu_cpu[i], sizeof(s->rpu_cpu[i]),
                           "cortex-r5f-" TYPE_ARM_CPU);
-        object_property_add_child(OBJECT(s), "rpu-cpu[*]",
+        object_property_add_child(OBJECT(&s->rpu_cluster), "rpu-cpu[*]",
                                   OBJECT(&s->rpu_cpu[i]), &error_abort);
 
         name = object_get_canonical_path_component(OBJECT(&s->rpu_cpu[i]));
@@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_init(Object *obj)
     int i;
     int num_apus = MIN(smp_cpus, XLNX_ZYNQMP_NUM_APU_CPUS);
 
+    object_initialize_child(obj, "apu-cluster", &s->apu_cluster,
+                            sizeof(s->apu_cluster), TYPE_CPU_CLUSTER,
+                            &error_abort, NULL);
+    qdev_prop_set_uint32(DEVICE(&s->apu_cluster), "cluster-id", 0);
+
     for (i = 0; i < num_apus; i++) {
-        object_initialize_child(obj, "apu-cpu[*]", &s->apu_cpu[i],
-                                sizeof(s->apu_cpu[i]),
-                                "cortex-a53-" TYPE_ARM_CPU, &error_abort, NULL);
+        object_initialize_child(OBJECT(&s->apu_cluster), "apu-cpu[*]",
+                                &s->apu_cpu[i], sizeof(s->apu_cpu[i]),
+                                "cortex-a53-" TYPE_ARM_CPU, &error_abort,
+                                NULL);
     }
 
     sysbus_init_child_obj(obj, "gic", &s->gic, sizeof(s->gic),
@@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
     qdev_prop_set_bit(DEVICE(&s->gic),
                       "has-virtualization-extensions", s->virt);
 
+    qdev_init_nofail(DEVICE(&s->apu_cluster));
+
     /* Realize APUs before realizing the GIC. KVM requires this.  */
     for (i = 0; i < num_apus; i++) {
         char *name;
-- 
2.19.2

From: Stefan Hajnoczi <stefanha@redhat.com>

This reverts commit 01fd41ab3fb69971c24a69ed49cde96086d81278.

The generic loader device (-device loader,file=kernel.bin) can be used
to load a kernel instead of the -kernel option.  Some boards have flash
memory (pflash) that is set via the -pflash or -drive options.

Allow starting QEMU without the -kernel option to accommodate these
scenarios.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103144124.18917-1-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/armv7m.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/armv7m.c
+++ b/hw/arm/armv7m.c
@@ -XXX,XX +XXX,XX @@ void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size)
     big_endian = 0;
 #endif
 
-    if (!kernel_filename && !qtest_enabled()) {
-        error_report("Guest image must be specified (using -kernel)");
-        exit(1);
-    }
-
     if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) {
         asidx = ARMASIdx_S;
     } else {
-- 
2.19.2

From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>

Plug a couple of "board creation time" memory leaks.

Fixes: 6f16da53ffe4567 ("hw/arm: versal: Add a virtual Xilinx Versal board")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190104104749.5314-2-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/xlnx-versal-virt.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/xlnx-versal-virt.c
+++ b/hw/arm/xlnx-versal-virt.c
@@ -XXX,XX +XXX,XX @@ static void fdt_add_gic_nodes(VersalVirt *s)
                                  2, MM_GIC_APU_REDIST_0_SIZE);
     qemu_fdt_setprop_cell(s->fdt, nodename, "#interrupt-cells", 3);
     qemu_fdt_setprop_string(s->fdt, nodename, "compatible", "arm,gic-v3");
+    g_free(nodename);
 }
 
 static void fdt_add_timer_nodes(VersalVirt *s)
@@ -XXX,XX +XXX,XX @@ static void create_virtio_regions(VersalVirt *s)
         sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic_irq);
         mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
         memory_region_add_subregion(&s->soc.mr_ps, base, mr);
+        g_free(name);
     }
 
     for (i = 0; i < NUM_VIRTIO_TRANSPORT; i++) {
-- 
2.19.2

From: Thomas Huth <thuth@redhat.com>

Some of the files in hw/input/, hw/misc/ and hw/timer/ are only
used by one of the ARM machines, so we can assign these files to
the corresponding boards.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 1546433583-18397-1-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 MAINTAINERS | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/intc/arm*
 F: hw/intc/gic_internal.h
 F: hw/misc/a9scu.c
 F: hw/misc/arm11scu.c
+F: hw/misc/arm_l2x0.c
 F: hw/timer/a9gtimer*
 F: hw/timer/arm*
 F: include/hw/arm/arm*.h
@@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org
 S: Maintained
 F: hw/arm/integratorcp.c
 F: hw/misc/arm_integrator_debug.c
+F: include/hw/misc/arm_integrator_debug.h
 
 MCIMX6UL EVK / i.MX6ul
 M: Peter Maydell <peter.maydell@linaro.org>
@@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org
 S: Odd Fixes
 F: hw/arm/mcimx7d-sabre.c
 F: hw/arm/fsl-imx7.c
+F: hw/misc/imx7_*.c
 F: include/hw/arm/fsl-imx7.h
+F: include/hw/misc/imx7_*.h
 F: hw/pci-host/designware.c
 F: include/hw/pci-host/designware.h
 
@@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org>
 L: qemu-arm@nongnu.org
 S: Odd Fixes
 F: hw/arm/nseries.c
+F: hw/input/lm832x.c
+F: hw/input/tsc2005.c
+F: hw/misc/cbus.c
+F: hw/timer/twl92230.c
 
 Palm
 M: Andrzej Zaborowski <balrogg@gmail.com>
@@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org>
 L: qemu-arm@nongnu.org
 S: Odd Fixes
 F: hw/arm/palm.c
+F: hw/input/tsc210x.c
 
 Raspberry Pi
 M: Peter Maydell <peter.maydell@linaro.org>
@@ -XXX,XX +XXX,XX @@ F: hw/display/tc6393xb.c
 F: hw/gpio/max7310.c
 F: hw/gpio/zaurus.c
 F: hw/misc/mst_fpga.c
+F: hw/misc/max111x.c
 F: include/hw/arm/pxa.h
 F: include/hw/arm/sharpsl.h
 
@@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org
 S: Odd Fixes
 F: hw/arm/sabrelite.c
 F: hw/arm/fsl-imx6.c
-F: hw/misc/imx6_src.c
+F: hw/misc/imx6_*.c
 F: hw/ssi/imx_spi.c
 F: include/hw/arm/fsl-imx6.h
-F: include/hw/misc/imx6_src.h
+F: include/hw/misc/imx6_*.h
 F: include/hw/ssi/imx_spi.h
 
 Sharp SL-5500 (Collie) PDA
@@ -XXX,XX +XXX,XX @@ R: Joel Stanley <joel@jms.id.au>
 L: qemu-arm@nongnu.org
 S: Maintained
 F: hw/*/*aspeed*
+F: hw/misc/pca9552.c
 F: include/hw/*/*aspeed*
+F: include/hw/misc/pca9552*.h
 F: hw/net/ftgmac100.c
 F: include/hw/net/ftgmac100.h
 
-- 
2.19.2

We use cpu_stop_current() to ensure the current CPU has stopped
from places like qemu_system_reset_request(). Unfortunately its
current implementation has a race. It calls qemu_cpu_stop(),
which sets cpu->stopped to true even though the CPU hasn't
actually stopped yet. The main thread will look at the flags
set by qemu_system_reset_request() and call pause_all_vcpus().
pause_all_vcpus() waits for every cpu to have cpu->stopped true,
so it can continue (and we will start the system reset operation)
before the vcpu thread has got back to its top level loop.

Instead, just set cpu->stop and call cpu_exit(). This will
cause the vcpu to exit back to the top level loop, and there
(as part of the wait_io_event code) it will call qemu_cpu_stop().

This fixes bugs where the reset request appeared to be ignored
or the CPU misbehaved because the reset operation started
to change vcpu state while the vcpu thread was still using it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Tested-by: Jaap Crezee <jaap@jcz.nl>
Message-id: 20181207155911.12710-1-peter.maydell@linaro.org
---
 cpus.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/cpus.c b/cpus.c
index XXXXXXX..XXXXXXX 100644
--- a/cpus.c
+++ b/cpus.c
@@ -XXX,XX +XXX,XX @@ void qemu_init_vcpu(CPUState *cpu)
 void cpu_stop_current(void)
 {
     if (current_cpu) {
-        qemu_cpu_stop(current_cpu, true);
+        current_cpu->stop = true;
+        cpu_exit(current_cpu);
     }
 }
 
-- 
2.19.2

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

From the "A10 User Manual V1.20" p.29: "3.2. Memory Mapping" and:

7. System Control
  7.1. Overview

A10 embeds a high-speed SRAM which has been split into five segments.
  See detailed memory mapping in following table:

Area          Address        Size (Bytes)
   A1    0x00000000-0x00003FFF 16K
   A2    0x00004000-0x00007FFF 16K
   A3    0x00008000-0x0000B3FF 13K
   A4    0x0000B400-0x0000BFFF  3K

Since for emulation purpose we don't need the segmentations, we simply define
the 'A' area as a single 48KB SRAM.

We don't implement the following others areas:
- 'B': 'Secure RAM' (64K),
- 'C': Debug/ISP SRAM
- 'D': USB SRAM

(qemu) info mtree
address-space: memory
  0000000000000000-ffffffffffffffff (prio 0, i/o): system
    0000000000000000-000000000000bfff (prio 0, ram): sram A
    0000000001c00000-0000000001c00fff (prio -1000, i/o): a10-sram-ctrl
    0000000001c0b000-0000000001c0bfff (prio 0, i/o): aw_emac
    0000000001c18000-0000000001c18fff (prio 0, i/o): ahci
      0000000001c18080-0000000001c180ff (prio 0, i/o): allwinner-ahci
    0000000001c20400-0000000001c207ff (prio 0, i/o): allwinner-a10-pic
    0000000001c20c00-0000000001c20fff (prio 0, i/o): allwinner-A10-timer
    0000000001c28000-0000000001c2801f (prio 0, i/o): serial
    0000000040000000-0000000047ffffff (prio 0, ram): cubieboard.ram

Reported-by: Charlie Smurthwaite <charlie@atech.media>
Tested-by: Charlie Smurthwaite <charlie@atech.media>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20190104142921.878-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/allwinner-a10.h | 1 +
 hw/arm/allwinner-a10.c         | 6 ++++++
 2 files changed, 7 insertions(+)

diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/allwinner-a10.h
+++ b/include/hw/arm/allwinner-a10.h
@@ -XXX,XX +XXX,XX @@ typedef struct AwA10State {
     AwA10PICState intc;
     AwEmacState emac;
     AllwinnerAHCIState sata;
+    MemoryRegion sram_a;
 } AwA10State;
 
 #define ALLWINNER_H_
diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/allwinner-a10.c
+++ b/hw/arm/allwinner-a10.c
@@ -XXX,XX +XXX,XX @@
 #include "hw/sysbus.h"
 #include "hw/devices.h"
 #include "hw/arm/allwinner-a10.h"
+#include "hw/misc/unimp.h"
 
 static void aw_a10_init(Object *obj)
 {
@@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp)
     sysbus_connect_irq(sysbusdev, 4, s->irq[67]);
     sysbus_connect_irq(sysbusdev, 5, s->irq[68]);
 
+    memory_region_init_ram(&s->sram_a, OBJECT(dev), "sram A", 48 * KiB,
+                           &error_fatal);
+    memory_region_add_subregion(get_system_memory(), 0x00000000, &s->sram_a);
+    create_unimplemented_device("a10-sram-ctrl", 0x01c00000, 4 * KiB);
+
     /* FIXME use qdev NIC properties instead of nd_table[] */
     if (nd_table[0].used) {
         qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC);
-- 
2.19.2

From: Steffen Görtz <contrib@steffen-goertz.de>

Adds a new qtest command "set_irq_in" which allows
to set qemu gpio lines to a given level.

Based on https://lists.gnu.org/archive/html/qemu-devel/2012-12/msg02363.html
which never got merged.

Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-2-stefanha@redhat.com
Originally-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 tests/libqtest.h | 13 +++++++++++++
 qtest.c          | 43 +++++++++++++++++++++++++++++++++++++++++++
 tests/libqtest.c | 10 ++++++++++
 3 files changed, 66 insertions(+)

diff --git a/tests/libqtest.h b/tests/libqtest.h
index XXXXXXX..XXXXXXX 100644
--- a/tests/libqtest.h
+++ b/tests/libqtest.h
@@ -XXX,XX +XXX,XX @@ void qtest_irq_intercept_in(QTestState *s, const char *string);
  */
 void qtest_irq_intercept_out(QTestState *s, const char *string);
 
+/**
+ * qtest_set_irq_in:
+ * @s: QTestState instance to operate on.
+ * @string: QOM path of a device
+ * @name: IRQ name
+ * @irq: IRQ number
+ * @level: IRQ level
+ *
+ * Force given device/irq GPIO-in pin to the given level.
+ */
+void qtest_set_irq_in(QTestState *s, const char *string, const char *name,
+                      int irq, int level);
+
 /**
  * qtest_outb:
  * @s: #QTestState instance to operate on.
diff --git a/qtest.c b/qtest.c
index XXXXXXX..XXXXXXX 100644
--- a/qtest.c
+++ b/qtest.c
@@ -XXX,XX +XXX,XX @@ static bool qtest_opened;
  * where NUM is an IRQ number.  For the PC, interrupts can be intercepted
  * simply with "irq_intercept_in ioapic" (note that IRQ0 comes out with
  * NUM=0 even though it is remapped to GSI 2).
+ *
+ * Setting interrupt level:
+ *
+ *  > set_irq_in QOM-PATH NAME NUM LEVEL
+ *  < OK
+ *
+ *  where NAME is the name of the irq/gpio list, NUM is an IRQ number and
+ *  LEVEL is an signed integer IRQ level.
+ *
+ * Forcibly set the given interrupt pin to the given level.
+ *
  */
 
 static int hex2nib(char ch)
@@ -XXX,XX +XXX,XX @@ static void qtest_process_command(CharBackend *chr, gchar **words)
         irq_intercept_dev = dev;
         qtest_send_prefix(chr);
         qtest_send(chr, "OK\n");
+    } else if (strcmp(words[0], "set_irq_in") == 0) {
+        DeviceState *dev;
+        qemu_irq irq;
+        char *name;
+        int ret;
+        int num;
+        int level;
 
+        g_assert(words[1] && words[2] && words[3] && words[4]);
+
+        dev = DEVICE(object_resolve_path(words[1], NULL));
+        if (!dev) {
+            qtest_send_prefix(chr);
+            qtest_send(chr, "FAIL Unknown device\n");
+            return;
+        }
+
+        if (strcmp(words[2], "unnamed-gpio-in") == 0) {
+            name = NULL;
+        } else {
+            name = words[2];
+        }
+
+        ret = qemu_strtoi(words[3], NULL, 0, &num);
+        g_assert(!ret);
+        ret = qemu_strtoi(words[4], NULL, 0, &level);
+        g_assert(!ret);
+
+        irq = qdev_get_gpio_in_named(dev, name, num);
+
+        qemu_set_irq(irq, level);
+        qtest_send_prefix(chr);
+        qtest_send(chr, "OK\n");
     } else if (strcmp(words[0], "outb") == 0 ||
                strcmp(words[0], "outw") == 0 ||
                strcmp(words[0], "outl") == 0) {
diff --git a/tests/libqtest.c b/tests/libqtest.c
index XXXXXXX..XXXXXXX 100644
--- a/tests/libqtest.c
+++ b/tests/libqtest.c
@@ -XXX,XX +XXX,XX @@ void qtest_irq_intercept_in(QTestState *s, const char *qom_path)
     qtest_rsp(s, 0);
 }
 
+void qtest_set_irq_in(QTestState *s, const char *qom_path, const char *name,
+                      int num, int level)
+{
+    if (!name) {
+        name = "unnamed-gpio-in";
+    }
+    qtest_sendf(s, "set_irq_in %s %s %d %d\n", qom_path, name, num, level);
+    qtest_rsp(s, 0);
+}
+
 static void qtest_out(QTestState *s, const char *cmd, uint16_t addr, uint32_t value)
 {
     qtest_sendf(s, "%s 0x%x 0x%x\n", cmd, addr, value);
-- 
2.19.2

From: Steffen Görtz <contrib@steffen-goertz.de>

Adds a header that provides definitions that are used
across nRF51 peripherals

Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-3-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/nrf51.h       | 45 ++++++++++++++++++++++++++++++++++++
 include/hw/char/nrf51_uart.h |  1 -
 hw/arm/nrf51_soc.c           | 33 ++++++++++----------------
 3 files changed, 57 insertions(+), 22 deletions(-)
 create mode 100644 include/hw/arm/nrf51.h

diff --git a/include/hw/arm/nrf51.h b/include/hw/arm/nrf51.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/arm/nrf51.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * Nordic Semiconductor nRF51 Series SOC Common Defines
+ *
+ * This file hosts generic defines used in various nRF51 peripheral devices.
+ *
+ * Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
+ * Product Spec: http://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.1.pdf
+ *
+ * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de>
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ */
+
+#ifndef NRF51_H
+#define NRF51_H
+
+#define NRF51_FLASH_BASE      0x00000000
+#define NRF51_FICR_BASE       0x10000000
+#define NRF51_FICR_SIZE       0x00000100
+#define NRF51_UICR_BASE       0x10001000
+#define NRF51_SRAM_BASE       0x20000000
+
+#define NRF51_IOMEM_BASE      0x40000000
+#define NRF51_IOMEM_SIZE      0x20000000
+
+#define NRF51_UART_BASE       0x40002000
+#define NRF51_TIMER_BASE      0x40008000
+#define NRF51_TIMER_SIZE      0x00001000
+#define NRF51_RNG_BASE        0x4000D000
+#define NRF51_NVMC_BASE       0x4001E000
+#define NRF51_GPIO_BASE       0x50000000
+
+#define NRF51_PRIVATE_BASE    0xF0000000
+#define NRF51_PRIVATE_SIZE    0x10000000
+
+#define NRF51_PAGE_SIZE       1024
+
+/* Trigger */
+#define NRF51_TRIGGER_TASK 0x01
+
+/* Events */
+#define NRF51_EVENT_CLEAR  0x00
+
+#endif
diff --git a/include/hw/char/nrf51_uart.h b/include/hw/char/nrf51_uart.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/char/nrf51_uart.h
+++ b/include/hw/char/nrf51_uart.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/registerfields.h"
 
 #define UART_FIFO_LENGTH 6
-#define UART_BASE 0x40002000
 #define UART_SIZE 0x1000
 
 #define TYPE_NRF51_UART "nrf51_soc.uart"
diff --git a/hw/arm/nrf51_soc.c b/hw/arm/nrf51_soc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/nrf51_soc.c
+++ b/hw/arm/nrf51_soc.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/log.h"
 #include "cpu.h"
 
+#include "hw/arm/nrf51.h"
 #include "hw/arm/nrf51_soc.h"
 
-#define IOMEM_BASE      0x40000000
-#define IOMEM_SIZE      0x20000000
-
-#define FICR_BASE       0x10000000
-#define FICR_SIZE       0x000000fc
-
-#define FLASH_BASE      0x00000000
-#define SRAM_BASE       0x20000000
-
-#define PRIVATE_BASE    0xF0000000
-#define PRIVATE_SIZE    0x10000000
-
 /*
  * The size and base is for the NRF51822 part. If other parts
  * are supported in the future, add a sub-class of NRF51SoC for
  * the specific variants
  */
-#define NRF51822_FLASH_SIZE     (256 * 1024)
-#define NRF51822_SRAM_SIZE      (16 * 1024)
+#define NRF51822_FLASH_SIZE     (256 * NRF51_PAGE_SIZE)
+#define NRF51822_SRAM_SIZE      (16 * NRF51_PAGE_SIZE)
 
 #define BASE_TO_IRQ(base) ((base >> 12) & 0x1F)
 
@@ -XXX,XX +XXX,XX @@ static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp)
         error_propagate(errp, err);
         return;
     }
-    memory_region_add_subregion(&s->container, FLASH_BASE, &s->flash);
+    memory_region_add_subregion(&s->container, NRF51_FLASH_BASE, &s->flash);
 
     memory_region_init_ram(&s->sram, NULL, "nrf51.sram", s->sram_size, &err);
     if (err) {
         error_propagate(errp, err);
         return;
     }
-    memory_region_add_subregion(&s->container, SRAM_BASE, &s->sram);
+    memory_region_add_subregion(&s->container, NRF51_SRAM_BASE, &s->sram);
 
     /* UART */
     object_property_set_bool(OBJECT(&s->uart), true, "realized", &err);
@@ -XXX,XX +XXX,XX @@ static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp)
         return;
     }
     mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->uart), 0);
-    memory_region_add_subregion_overlap(&s->container, UART_BASE, mr, 0);
+    memory_region_add_subregion_overlap(&s->container, NRF51_UART_BASE, mr, 0);
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart), 0,
                        qdev_get_gpio_in(DEVICE(&s->cpu),
-                       BASE_TO_IRQ(UART_BASE)));
+                       BASE_TO_IRQ(NRF51_UART_BASE)));
 
-    create_unimplemented_device("nrf51_soc.io", IOMEM_BASE, IOMEM_SIZE);
-    create_unimplemented_device("nrf51_soc.ficr", FICR_BASE, FICR_SIZE);
+    create_unimplemented_device("nrf51_soc.io", NRF51_IOMEM_BASE,
+                                NRF51_IOMEM_SIZE);
+    create_unimplemented_device("nrf51_soc.ficr", NRF51_FICR_BASE,
+                                NRF51_FICR_SIZE);
     create_unimplemented_device("nrf51_soc.private",
-                                PRIVATE_BASE, PRIVATE_SIZE);
+                                NRF51_PRIVATE_BASE, NRF51_PRIVATE_SIZE);
 }
 
 static void nrf51_soc_init(Object *obj)
-- 
2.19.2

From: Steffen Görtz <contrib@steffen-goertz.de>

Add a model of the NRF51 random number generator peripheral.
This is a simple random generator that continuously generates
new random values after startup.

Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf

Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-4-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/misc/Makefile.objs       |   1 +
 include/hw/misc/nrf51_rng.h |  83 ++++++++++++
 hw/misc/nrf51_rng.c         | 262 ++++++++++++++++++++++++++++++++++++
 3 files changed, 346 insertions(+)
 create mode 100644 include/hw/misc/nrf51_rng.h
 create mode 100644 hw/misc/nrf51_rng.c

diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_PVPANIC) += pvpanic.o
 obj-$(CONFIG_AUX) += auxbus.o
 obj-$(CONFIG_ASPEED_SOC) += aspeed_scu.o aspeed_sdmc.o
 obj-$(CONFIG_MSF2) += msf2-sysreg.o
+obj-$(CONFIG_NRF51_SOC) += nrf51_rng.o
diff --git a/include/hw/misc/nrf51_rng.h b/include/hw/misc/nrf51_rng.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/misc/nrf51_rng.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * nRF51 Random Number Generator
+ *
+ * QEMU interface:
+ * + Property "period_unfiltered_us": Time between two biased values in
+ *   microseconds.
+ * + Property "period_filtered_us": Time between two unbiased values in
+ *   microseconds.
+ * + sysbus MMIO regions 0: Memory Region with tasks, events and registers
+ *   to be mapped to the peripherals instance address by the SOC.
+ * + Named GPIO output "irq": Interrupt line of the peripheral. Must be
+ *   connected to the associated peripheral interrupt line of the NVIC.
+ * + Named GPIO output "eep_valrdy": Event set when new random value is ready
+ *   to be read.
+ * + Named GPIO input "tep_start": Task that triggers start of continuous
+ *   generation of random values.
+ * + Named GPIO input "tep_stop": Task that ends continuous generation of
+ *   random values.
+ *
+ * Accuracy of the peripheral model:
+ * + Stochastic properties of different configurations of the random source
+ *   are not modeled.
+ * + Generation of unfiltered and filtered random values take at least the
+ *   average generation time stated in the production specification;
+ *   non-deterministic generation times are not modeled.
+ *
+ * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de>
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+#ifndef NRF51_RNG_H
+#define NRF51_RNG_H
+
+#include "hw/sysbus.h"
+#include "qemu/timer.h"
+#define TYPE_NRF51_RNG "nrf51_soc.rng"
+#define NRF51_RNG(obj) OBJECT_CHECK(NRF51RNGState, (obj), TYPE_NRF51_RNG)
+
+#define NRF51_RNG_SIZE         0x1000
+
+#define NRF51_RNG_TASK_START   0x000
+#define NRF51_RNG_TASK_STOP    0x004
+#define NRF51_RNG_EVENT_VALRDY 0x100
+#define NRF51_RNG_REG_SHORTS   0x200
+#define NRF51_RNG_REG_SHORTS_VALRDY_STOP 0
+#define NRF51_RNG_REG_INTEN    0x300
+#define NRF51_RNG_REG_INTEN_VALRDY 0
+#define NRF51_RNG_REG_INTENSET 0x304
+#define NRF51_RNG_REG_INTENCLR 0x308
+#define NRF51_RNG_REG_CONFIG   0x504
+#define NRF51_RNG_REG_CONFIG_DECEN 0
+#define NRF51_RNG_REG_VALUE    0x508
+
+typedef struct {
+    SysBusDevice parent_obj;
+
+    MemoryRegion mmio;
+    qemu_irq irq;
+
+    /* Event End Points */
+    qemu_irq eep_valrdy;
+
+    QEMUTimer timer;
+
+    /* Time between generation of successive unfiltered values in us */
+    uint16_t period_unfiltered_us;
+    /* Time between generation of successive filtered values in us */
+    uint16_t period_filtered_us;
+
+    uint8_t value;
+
+    uint32_t active;
+    uint32_t event_valrdy;
+    uint32_t shortcut_stop_on_valrdy;
+    uint32_t interrupt_enabled;
+    uint32_t filter_enabled;
+
+} NRF51RNGState;
+
+
+#endif /* NRF51_RNG_H_ */
diff --git a/hw/misc/nrf51_rng.c b/hw/misc/nrf51_rng.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/misc/nrf51_rng.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * nRF51 Random Number Generator
+ *
+ * Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.1.pdf
+ *
+ * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de>
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qapi/error.h"
+#include "hw/arm/nrf51.h"
+#include "hw/misc/nrf51_rng.h"
+#include "crypto/random.h"
+
+static void update_irq(NRF51RNGState *s)
+{
+    bool irq = s->interrupt_enabled && s->event_valrdy;
+    qemu_set_irq(s->irq, irq);
+}
+
+static uint64_t rng_read(void *opaque, hwaddr offset, unsigned int size)
+{
+    NRF51RNGState *s = NRF51_RNG(opaque);
+    uint64_t r = 0;
+
+    switch (offset) {
+    case NRF51_RNG_EVENT_VALRDY:
+        r = s->event_valrdy;
+        break;
+    case NRF51_RNG_REG_SHORTS:
+        r = s->shortcut_stop_on_valrdy;
+        break;
+    case NRF51_RNG_REG_INTEN:
+    case NRF51_RNG_REG_INTENSET:
+    case NRF51_RNG_REG_INTENCLR:
+        r = s->interrupt_enabled;
+        break;
+    case NRF51_RNG_REG_CONFIG:
+        r = s->filter_enabled;
+        break;
+    case NRF51_RNG_REG_VALUE:
+        r = s->value;
+        break;
+
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: bad read offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+    }
+
+    return r;
+}
+
+static int64_t calc_next_timeout(NRF51RNGState *s)
+{
+    int64_t timeout = qemu_clock_get_us(QEMU_CLOCK_VIRTUAL);
+    if (s->filter_enabled) {
+        timeout += s->period_filtered_us;
+    } else {
+        timeout += s->period_unfiltered_us;
+    }
+
+    return timeout;
+}
+
+
+static void rng_update_timer(NRF51RNGState *s)
+{
+    if (s->active) {
+        timer_mod(&s->timer, calc_next_timeout(s));
+    } else {
+        timer_del(&s->timer);
+    }
+}
+
+
+static void rng_write(void *opaque, hwaddr offset,
+                       uint64_t value, unsigned int size)
+{
+    NRF51RNGState *s = NRF51_RNG(opaque);
+
+    switch (offset) {
+    case NRF51_RNG_TASK_START:
+        if (value == NRF51_TRIGGER_TASK) {
+            s->active = 1;
+            rng_update_timer(s);
+        }
+        break;
+    case NRF51_RNG_TASK_STOP:
+        if (value == NRF51_TRIGGER_TASK) {
+            s->active = 0;
+            rng_update_timer(s);
+        }
+        break;
+    case NRF51_RNG_EVENT_VALRDY:
+        if (value == NRF51_EVENT_CLEAR) {
+            s->event_valrdy = 0;
+        }
+        break;
+    case NRF51_RNG_REG_SHORTS:
+        s->shortcut_stop_on_valrdy =
+                (value & BIT_MASK(NRF51_RNG_REG_SHORTS_VALRDY_STOP)) ? 1 : 0;
+        break;
+    case NRF51_RNG_REG_INTEN:
+        s->interrupt_enabled =
+                (value & BIT_MASK(NRF51_RNG_REG_INTEN_VALRDY)) ? 1 : 0;
+        break;
+    case NRF51_RNG_REG_INTENSET:
+        if (value & BIT_MASK(NRF51_RNG_REG_INTEN_VALRDY)) {
+            s->interrupt_enabled = 1;
+        }
+        break;
+    case NRF51_RNG_REG_INTENCLR:
+        if (value & BIT_MASK(NRF51_RNG_REG_INTEN_VALRDY)) {
+            s->interrupt_enabled = 0;
+        }
+        break;
+    case NRF51_RNG_REG_CONFIG:
+        s->filter_enabled =
+                      (value & BIT_MASK(NRF51_RNG_REG_CONFIG_DECEN)) ? 1 : 0;
+        break;
+
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: bad write offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+    }
+
+    update_irq(s);
+}
+
+static const MemoryRegionOps rng_ops = {
+    .read =  rng_read,
+    .write = rng_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .impl.min_access_size = 4,
+    .impl.max_access_size = 4
+};
+
+static void nrf51_rng_timer_expire(void *opaque)
+{
+    NRF51RNGState *s = NRF51_RNG(opaque);
+
+    qcrypto_random_bytes(&s->value, 1, &error_abort);
+
+    s->event_valrdy = 1;
+    qemu_set_irq(s->eep_valrdy, 1);
+
+    if (s->shortcut_stop_on_valrdy) {
+        s->active = 0;
+    }
+
+    rng_update_timer(s);
+    update_irq(s);
+}
+
+static void nrf51_rng_tep_start(void *opaque, int n, int level)
+{
+    NRF51RNGState *s = NRF51_RNG(opaque);
+
+    if (level) {
+        s->active = 1;
+        rng_update_timer(s);
+    }
+}
+
+static void nrf51_rng_tep_stop(void *opaque, int n, int level)
+{
+    NRF51RNGState *s = NRF51_RNG(opaque);
+
+    if (level) {
+        s->active = 0;
+        rng_update_timer(s);
+    }
+}
+
+
+static void nrf51_rng_init(Object *obj)
+{
+    NRF51RNGState *s = NRF51_RNG(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+
+    memory_region_init_io(&s->mmio, obj, &rng_ops, s,
+            TYPE_NRF51_RNG, NRF51_RNG_SIZE);
+    sysbus_init_mmio(sbd, &s->mmio);
+
+    timer_init_us(&s->timer, QEMU_CLOCK_VIRTUAL, nrf51_rng_timer_expire, s);
+
+    sysbus_init_irq(sbd, &s->irq);
+
+    /* Tasks */
+    qdev_init_gpio_in_named(DEVICE(s), nrf51_rng_tep_start, "tep_start", 1);
+    qdev_init_gpio_in_named(DEVICE(s), nrf51_rng_tep_stop, "tep_stop", 1);
+
+    /* Events */
+    qdev_init_gpio_out_named(DEVICE(s), &s->eep_valrdy, "eep_valrdy", 1);
+}
+
+static void nrf51_rng_reset(DeviceState *dev)
+{
+    NRF51RNGState *s = NRF51_RNG(dev);
+
+    s->value = 0;
+    s->active = 0;
+    s->event_valrdy = 0;
+    s->shortcut_stop_on_valrdy = 0;
+    s->interrupt_enabled = 0;
+    s->filter_enabled = 0;
+
+    rng_update_timer(s);
+}
+
+
+static Property nrf51_rng_properties[] = {
+    DEFINE_PROP_UINT16("period_unfiltered_us", NRF51RNGState,
+            period_unfiltered_us, 167),
+    DEFINE_PROP_UINT16("period_filtered_us", NRF51RNGState,
+            period_filtered_us, 660),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static const VMStateDescription vmstate_rng = {
+    .name = "nrf51_soc.rng",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(active, NRF51RNGState),
+        VMSTATE_UINT32(event_valrdy, NRF51RNGState),
+        VMSTATE_UINT32(shortcut_stop_on_valrdy, NRF51RNGState),
+        VMSTATE_UINT32(interrupt_enabled, NRF51RNGState),
+        VMSTATE_UINT32(filter_enabled, NRF51RNGState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void nrf51_rng_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->props = nrf51_rng_properties;
+    dc->vmsd = &vmstate_rng;
+    dc->reset = nrf51_rng_reset;
+}
+
+static const TypeInfo nrf51_rng_info = {
+    .name = TYPE_NRF51_RNG,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(NRF51RNGState),
+    .instance_init = nrf51_rng_init,
+    .class_init = nrf51_rng_class_init
+};
+
+static void nrf51_rng_register_types(void)
+{
+    type_register_static(&nrf51_rng_info);
+}
+
+type_init(nrf51_rng_register_types)
-- 
2.19.2

From: Steffen Görtz <contrib@steffen-goertz.de>

Use RNG in SOC.

From: Steffen Görtz <contrib@steffen-goertz.de>

This adds a model of the nRF51 GPIO peripheral.

Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf

The nRF51 series microcontrollers support up to 32 GPIO pins in various configurations.
The pins can be used as input pins with pull-ups or pull-down.
Furthermore, three different output driver modes per level are
available (disconnected, standard, high-current).

The GPIO-Peripheral has a mechanism for detecting level changes which is
not featured in this model.

Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-6-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 Makefile.objs                |   1 +
 hw/gpio/Makefile.objs        |   1 +
 include/hw/gpio/nrf51_gpio.h |  69 ++++++++
 hw/gpio/nrf51_gpio.c         | 300 +++++++++++++++++++++++++++++++++++
 hw/gpio/trace-events         |   7 +
 5 files changed, 378 insertions(+)
 create mode 100644 include/hw/gpio/nrf51_gpio.h
 create mode 100644 hw/gpio/nrf51_gpio.c
 create mode 100644 hw/gpio/trace-events

diff --git a/Makefile.objs b/Makefile.objs
index XXXXXXX..XXXXXXX 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -XXX,XX +XXX,XX @@ trace-events-subdirs += hw/vfio
 trace-events-subdirs += hw/virtio
 trace-events-subdirs += hw/watchdog
 trace-events-subdirs += hw/xen
+trace-events-subdirs += hw/gpio
 trace-events-subdirs += io
 trace-events-subdirs += linux-user
 trace-events-subdirs += migration
diff --git a/hw/gpio/Makefile.objs b/hw/gpio/Makefile.objs
index XXXXXXX..XXXXXXX 100644
--- a/hw/gpio/Makefile.objs
+++ b/hw/gpio/Makefile.objs
@@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_GPIO_KEY) += gpio_key.o
 obj-$(CONFIG_OMAP) += omap_gpio.o
 obj-$(CONFIG_IMX) += imx_gpio.o
 obj-$(CONFIG_RASPI) += bcm2835_gpio.o
+obj-$(CONFIG_NRF51_SOC) += nrf51_gpio.o
diff --git a/include/hw/gpio/nrf51_gpio.h b/include/hw/gpio/nrf51_gpio.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/gpio/nrf51_gpio.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * nRF51 System-on-Chip general purpose input/output register definition
+ *
+ * QEMU interface:
+ * + sysbus MMIO regions 0: GPIO registers
+ * + Unnamed GPIO inputs 0-31: Set tri-state input level for GPIO pin.
+ *   Level -1: Externally Disconnected/Floating; Pull-up/down will be regarded
+ *   Level 0: Input externally driven LOW
+ *   Level 1: Input externally driven HIGH
+ * + Unnamed GPIO outputs 0-31:
+ *   Level -1: Disconnected/Floating
+ *   Level 0: Driven LOW
+ *   Level 1: Driven HIGH
+ *
+ * Accuracy of the peripheral model:
+ * + The nRF51 GPIO output driver supports two modes, standard and high-current
+ *   mode. These different drive modes are not modeled and handled the same.
+ * + Pin SENSEing is not modeled/implemented.
+ *
+ * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de>
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+#ifndef NRF51_GPIO_H
+#define NRF51_GPIO_H
+
+#include "hw/sysbus.h"
+#define TYPE_NRF51_GPIO "nrf51_soc.gpio"
+#define NRF51_GPIO(obj) OBJECT_CHECK(NRF51GPIOState, (obj), TYPE_NRF51_GPIO)
+
+#define NRF51_GPIO_PINS 32
+
+#define NRF51_GPIO_SIZE 0x1000
+
+#define NRF51_GPIO_REG_OUT          0x504
+#define NRF51_GPIO_REG_OUTSET       0x508
+#define NRF51_GPIO_REG_OUTCLR       0x50C
+#define NRF51_GPIO_REG_IN           0x510
+#define NRF51_GPIO_REG_DIR          0x514
+#define NRF51_GPIO_REG_DIRSET       0x518
+#define NRF51_GPIO_REG_DIRCLR       0x51C
+#define NRF51_GPIO_REG_CNF_START    0x700
+#define NRF51_GPIO_REG_CNF_END      0x77F
+
+#define NRF51_GPIO_PULLDOWN 1
+#define NRF51_GPIO_PULLUP 3
+
+typedef struct NRF51GPIOState {
+    SysBusDevice parent_obj;
+
+    MemoryRegion mmio;
+    qemu_irq irq;
+
+    uint32_t out;
+    uint32_t in;
+    uint32_t in_mask;
+    uint32_t dir;
+    uint32_t cnf[NRF51_GPIO_PINS];
+
+    uint32_t old_out;
+    uint32_t old_out_connected;
+
+    qemu_irq output[NRF51_GPIO_PINS];
+} NRF51GPIOState;
+
+
+#endif
diff --git a/hw/gpio/nrf51_gpio.c b/hw/gpio/nrf51_gpio.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/gpio/nrf51_gpio.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * nRF51 System-on-Chip general purpose input/output register definition
+ *
+ * Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
+ * Product Spec: http://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.1.pdf
+ *
+ * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de>
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/gpio/nrf51_gpio.h"
+#include "trace.h"
+
+/*
+ * Check if the output driver is connected to the direction switch
+ * given the current configuration and logic level.
+ * It is not differentiated between standard and "high"(-power) drive modes.
+ */
+static bool is_connected(uint32_t config, uint32_t level)
+{
+    bool state;
+    uint32_t drive_config = extract32(config, 8, 3);
+
+    switch (drive_config) {
+    case 0 ... 3:
+        state = true;
+        break;
+    case 4 ... 5:
+        state = level != 0;
+        break;
+    case 6 ... 7:
+        state = level == 0;
+        break;
+    default:
+        g_assert_not_reached();
+        break;
+    }
+
+    return state;
+}
+
+static void update_output_irq(NRF51GPIOState *s, size_t i,
+                              bool connected, bool level)
+{
+    int64_t irq_level = connected ? level : -1;
+    bool old_connected = extract32(s->old_out_connected, i, 1);
+    bool old_level = extract32(s->old_out, i, 1);
+
+    if ((old_connected != connected) || (old_level != level)) {
+        qemu_set_irq(s->output[i], irq_level);
+        trace_nrf51_gpio_update_output_irq(i, irq_level);
+    }
+
+    s->old_out = deposit32(s->old_out, i, 1, level);
+    s->old_out_connected = deposit32(s->old_out_connected, i, 1, connected);
+}
+
+static void update_state(NRF51GPIOState *s)
+{
+    uint32_t pull;
+    size_t i;
+    bool connected_out, dir, connected_in, out, input;
+
+    for (i = 0; i < NRF51_GPIO_PINS; i++) {
+        pull = extract32(s->cnf[i], 2, 2);
+        dir = extract32(s->cnf[i], 0, 1);
+        connected_in = extract32(s->in_mask, i, 1);
+        out = extract32(s->out, i, 1);
+        input = !extract32(s->cnf[i], 1, 1);
+        connected_out = is_connected(s->cnf[i], out) && dir;
+
+        update_output_irq(s, i, connected_out, out);
+
+        /* Pin both driven externally and internally */
+        if (connected_out && connected_in) {
+            qemu_log_mask(LOG_GUEST_ERROR, "GPIO pin %zu short circuited\n", i);
+        }
+
+        /*
+         * Input buffer disconnected from internal/external drives, so
+         * pull-up/pull-down becomes relevant
+         */
+        if (!input || (input && !connected_in && !connected_out)) {
+            if (pull == NRF51_GPIO_PULLDOWN) {
+                s->in = deposit32(s->in, i, 1, 0);
+            } else if (pull == NRF51_GPIO_PULLUP) {
+                s->in = deposit32(s->in, i, 1, 1);
+            }
+        }
+
+        /* Self stimulation through internal output driver */
+        if (connected_out && !connected_in && input) {
+            s->in = deposit32(s->in, i, 1, out);
+        }
+    }
+
+}
+
+/*
+ * Direction is exposed in both the DIR register and the DIR bit
+ * of each PINs CNF configuration register. Reflect bits for pins in DIR
+ * to individual pin configuration registers.
+ */
+static void reflect_dir_bit_in_cnf(NRF51GPIOState *s)
+{
+    size_t i;
+
+    uint32_t value = s->dir;
+
+    for (i = 0; i < NRF51_GPIO_PINS; i++) {
+        s->cnf[i] = (s->cnf[i] & ~(1UL)) | ((value >> i) & 0x01);
+    }
+}
+
+static uint64_t nrf51_gpio_read(void *opaque, hwaddr offset, unsigned int size)
+{
+    NRF51GPIOState *s = NRF51_GPIO(opaque);
+    uint64_t r = 0;
+    size_t idx;
+
+    switch (offset) {
+    case NRF51_GPIO_REG_OUT ... NRF51_GPIO_REG_OUTCLR:
+        r = s->out;
+        break;
+
+    case NRF51_GPIO_REG_IN:
+        r = s->in;
+        break;
+
+    case NRF51_GPIO_REG_DIR ... NRF51_GPIO_REG_DIRCLR:
+        r = s->dir;
+        break;
+
+    case NRF51_GPIO_REG_CNF_START ... NRF51_GPIO_REG_CNF_END:
+        idx = (offset - NRF51_GPIO_REG_CNF_START) / 4;
+        r = s->cnf[idx];
+        break;
+
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                "%s: bad read offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+    }
+
+    trace_nrf51_gpio_read(offset, r);
+
+    return r;
+}
+
+static void nrf51_gpio_write(void *opaque, hwaddr offset,
+                       uint64_t value, unsigned int size)
+{
+    NRF51GPIOState *s = NRF51_GPIO(opaque);
+    size_t idx;
+
+    trace_nrf51_gpio_write(offset, value);
+
+    switch (offset) {
+    case NRF51_GPIO_REG_OUT:
+        s->out = value;
+        break;
+
+    case NRF51_GPIO_REG_OUTSET:
+        s->out |= value;
+        break;
+
+    case NRF51_GPIO_REG_OUTCLR:
+        s->out &= ~value;
+        break;
+
+    case NRF51_GPIO_REG_DIR:
+        s->dir = value;
+        reflect_dir_bit_in_cnf(s);
+        break;
+
+    case NRF51_GPIO_REG_DIRSET:
+        s->dir |= value;
+        reflect_dir_bit_in_cnf(s);
+        break;
+
+    case NRF51_GPIO_REG_DIRCLR:
+        s->dir &= ~value;
+        reflect_dir_bit_in_cnf(s);
+        break;
+
+    case NRF51_GPIO_REG_CNF_START ... NRF51_GPIO_REG_CNF_END:
+        idx = (offset - NRF51_GPIO_REG_CNF_START) / 4;
+        s->cnf[idx] = value;
+        /*
+         * direction is exposed in both the DIR register and the DIR bit
+         * of each PINs CNF configuration register.
+         */
+        s->dir = (s->dir & ~(1UL << idx)) | ((value & 0x01) << idx);
+        break;
+
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: bad write offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+    }
+
+    update_state(s);
+}
+
+static const MemoryRegionOps gpio_ops = {
+    .read =  nrf51_gpio_read,
+    .write = nrf51_gpio_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .impl.min_access_size = 4,
+    .impl.max_access_size = 4,
+};
+
+static void nrf51_gpio_set(void *opaque, int line, int value)
+{
+    NRF51GPIOState *s = NRF51_GPIO(opaque);
+
+    trace_nrf51_gpio_set(line, value);
+
+    assert(line >= 0 && line < NRF51_GPIO_PINS);
+
+    s->in_mask = deposit32(s->in_mask, line, 1, value >= 0);
+    if (value >= 0) {
+        s->in = deposit32(s->in, line, 1, value != 0);
+    }
+
+    update_state(s);
+}
+
+static void nrf51_gpio_reset(DeviceState *dev)
+{
+    NRF51GPIOState *s = NRF51_GPIO(dev);
+    size_t i;
+
+    s->out = 0;
+    s->old_out = 0;
+    s->old_out_connected = 0;
+    s->in = 0;
+    s->in_mask = 0;
+    s->dir = 0;
+
+    for (i = 0; i < NRF51_GPIO_PINS; i++) {
+        s->cnf[i] = 0x00000002;
+    }
+}
+
+static const VMStateDescription vmstate_nrf51_gpio = {
+    .name = TYPE_NRF51_GPIO,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(out, NRF51GPIOState),
+        VMSTATE_UINT32(in, NRF51GPIOState),
+        VMSTATE_UINT32(in_mask, NRF51GPIOState),
+        VMSTATE_UINT32(dir, NRF51GPIOState),
+        VMSTATE_UINT32_ARRAY(cnf, NRF51GPIOState, NRF51_GPIO_PINS),
+        VMSTATE_UINT32(old_out, NRF51GPIOState),
+        VMSTATE_UINT32(old_out_connected, NRF51GPIOState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void nrf51_gpio_init(Object *obj)
+{
+    NRF51GPIOState *s = NRF51_GPIO(obj);
+
+    memory_region_init_io(&s->mmio, obj, &gpio_ops, s,
+            TYPE_NRF51_GPIO, NRF51_GPIO_SIZE);
+    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+
+    qdev_init_gpio_in(DEVICE(s), nrf51_gpio_set, NRF51_GPIO_PINS);
+    qdev_init_gpio_out(DEVICE(s), s->output, NRF51_GPIO_PINS);
+}
+
+static void nrf51_gpio_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->vmsd = &vmstate_nrf51_gpio;
+    dc->reset = nrf51_gpio_reset;
+    dc->desc = "nRF51 GPIO";
+}
+
+static const TypeInfo nrf51_gpio_info = {
+    .name = TYPE_NRF51_GPIO,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(NRF51GPIOState),
+    .instance_init = nrf51_gpio_init,
+    .class_init = nrf51_gpio_class_init
+};
+
+static void nrf51_gpio_register_types(void)
+{
+    type_register_static(&nrf51_gpio_info);
+}
+
+type_init(nrf51_gpio_register_types)
diff --git a/hw/gpio/trace-events b/hw/gpio/trace-events
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/gpio/trace-events
@@ -XXX,XX +XXX,XX @@
+# See docs/devel/tracing.txt for syntax documentation.
+
+# hw/gpio/nrf51_gpio.c
+nrf51_gpio_read(uint64_t offset, uint64_t r) "offset 0x%" PRIx64 " value 0x%" PRIx64
+nrf51_gpio_write(uint64_t offset, uint64_t value) "offset 0x%" PRIx64 " value 0x%" PRIx64
+nrf51_gpio_set(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64
+nrf51_gpio_update_output_irq(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64
\ No newline at end of file
-- 
2.19.2

From: Steffen Görtz <contrib@steffen-goertz.de>

Instantiates GPIO peripheral model

From: Steffen Görtz <contrib@steffen-goertz.de>

The test suite for the nRF51 GPIO peripheral for now
only tests initial state. Additionally a set of
tests testing an implementation detail of the model
are included.

Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-8-stefanha@redhat.com
[PMM: fixed stray space at start of file]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 tests/Makefile.include |   2 +
 tests/microbit-test.c  | 160 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 162 insertions(+)
 create mode 100644 tests/microbit-test.c

diff --git a/tests/Makefile.include b/tests/Makefile.include
index XXXXXXX..XXXXXXX 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -XXX,XX +XXX,XX @@ check-qtest-sparc64-y += tests/boot-serial-test$(EXESUF)
 check-qtest-arm-y += tests/tmp105-test$(EXESUF)
 check-qtest-arm-y += tests/pca9552-test$(EXESUF)
 check-qtest-arm-y += tests/ds1338-test$(EXESUF)
+check-qtest-arm-y += tests/microbit-test$(EXESUF)
 check-qtest-arm-y += tests/m25p80-test$(EXESUF)
 check-qtest-arm-y += tests/virtio-blk-test$(EXESUF)
 check-qtest-arm-y += tests/test-arm-mptimer$(EXESUF)
@@ -XXX,XX +XXX,XX @@ tests/pxe-test$(EXESUF): tests/pxe-test.o tests/boot-sector.o $(libqos-obj-y)
 tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y)
 tests/pca9552-test$(EXESUF): tests/pca9552-test.o $(libqos-omap-obj-y)
 tests/ds1338-test$(EXESUF): tests/ds1338-test.o $(libqos-imx-obj-y)
+tests/microbit-test$(EXESUF): tests/microbit-test.o
 tests/m25p80-test$(EXESUF): tests/m25p80-test.o
 tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y)
 tests/q35-test$(EXESUF): tests/q35-test.o $(libqos-pc-obj-y)
diff --git a/tests/microbit-test.c b/tests/microbit-test.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/microbit-test.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * QTest testcase for Microbit board using the Nordic Semiconductor nRF51 SoC.
+ *
+ * nRF51:
+ * Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
+ * Product Spec: http://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.1.pdf
+ *
+ * Microbit Board: http://microbit.org/
+ *
+ * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de>
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ */
+
+
+#include "qemu/osdep.h"
+#include "exec/hwaddr.h"
+#include "libqtest.h"
+
+#include "hw/arm/nrf51.h"
+#include "hw/gpio/nrf51_gpio.h"
+
+static void test_nrf51_gpio(void)
+{
+    size_t i;
+    uint32_t actual, expected;
+
+    struct {
+        hwaddr addr;
+        uint32_t expected;
+    } const reset_state[] = {
+        {NRF51_GPIO_REG_OUT, 0x00000000}, {NRF51_GPIO_REG_OUTSET, 0x00000000},
+        {NRF51_GPIO_REG_OUTCLR, 0x00000000}, {NRF51_GPIO_REG_IN, 0x00000000},
+        {NRF51_GPIO_REG_DIR, 0x00000000}, {NRF51_GPIO_REG_DIRSET, 0x00000000},
+        {NRF51_GPIO_REG_DIRCLR, 0x00000000}
+    };
+
+    /* Check reset state */
+    for (i = 0; i < ARRAY_SIZE(reset_state); i++) {
+        expected = reset_state[i].expected;
+        actual = readl(NRF51_GPIO_BASE + reset_state[i].addr);
+        g_assert_cmpuint(actual, ==, expected);
+    }
+
+    for (i = 0; i < NRF51_GPIO_PINS; i++) {
+        expected = 0x00000002;
+        actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START + i * 4);
+        g_assert_cmpuint(actual, ==, expected);
+    }
+
+    /* Check dir bit consistency between dir and cnf */
+    /* Check set via DIRSET */
+    expected = 0x80000001;
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIRSET, expected);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR);
+    g_assert_cmpuint(actual, ==, expected);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+
+    /* Check clear via DIRCLR */
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIRCLR, 0x80000001);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR);
+    g_assert_cmpuint(actual, ==, 0x00000000);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x00);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x00);
+
+    /* Check set via DIR */
+    expected = 0x80000001;
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR, expected);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR);
+    g_assert_cmpuint(actual, ==, expected);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+
+    /* Reset DIR */
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR, 0x00000000);
+
+    /* Check Input propagates */
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x00);
+    qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 0);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x00);
+    qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 1);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+    qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, -1);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
+
+    /* Check pull-up working */
+    qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 0);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0000);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x00);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b1110);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
+
+    /* Check pull-down working */
+    qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 1);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0000);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0110);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x00);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
+    qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, -1);
+
+    /* Check Output propagates */
+    irq_intercept_out("/machine/nrf51");
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0011);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01);
+    g_assert_true(get_irq(0));
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTCLR, 0x01);
+    g_assert_false(get_irq(0));
+
+    /* Check self-stimulation */
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b01);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTCLR, 0x01);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x00);
+
+    /*
+     * Check short-circuit - generates an guest_error which must be checked
+     * manually as long as qtest can not scan qemu_log messages
+     */
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b01);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01);
+    qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 0);
+}
+
+int main(int argc, char **argv)
+{
+    int ret;
+
+    g_test_init(&argc, &argv, NULL);
+
+    global_qtest = qtest_initf("-machine microbit");
+
+    qtest_add_func("/microbit/nrf51/gpio", test_nrf51_gpio);
+
+    ret = g_test_run();
+
+    qtest_quit(global_qtest);
+    return ret;
+}
-- 
2.19.2

From: Steffen Görtz <contrib@steffen-goertz.de>

This patch adds the model for the nRF51 timer peripheral.
Currently, only the TIMER mode is implemented.

Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-9-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/timer/Makefile.objs         |   1 +
 include/hw/timer/nrf51_timer.h |  80 +++++++
 hw/timer/nrf51_timer.c         | 393 +++++++++++++++++++++++++++++++++
 hw/timer/trace-events          |   5 +
 4 files changed, 479 insertions(+)
 create mode 100644 include/hw/timer/nrf51_timer.h
 create mode 100644 hw/timer/nrf51_timer.c

diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/Makefile.objs
+++ b/hw/timer/Makefile.objs
@@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_IMX) += imx_gpt.o
 common-obj-$(CONFIG_LM32) += lm32_timer.o
 common-obj-$(CONFIG_MILKYMIST) += milkymist-sysctl.o
 common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-rtc.o
+common-obj-$(CONFIG_NRF51_SOC) += nrf51_timer.o
 
 obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o
 obj-$(CONFIG_EXYNOS4) += exynos4210_mct.o
diff --git a/include/hw/timer/nrf51_timer.h b/include/hw/timer/nrf51_timer.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/timer/nrf51_timer.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * nRF51 System-on-Chip Timer peripheral
+ *
+ * QEMU interface:
+ * + sysbus MMIO regions 0: GPIO registers
+ * + sysbus irq
+ *
+ * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de>
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ */
+#ifndef NRF51_TIMER_H
+#define NRF51_TIMER_H
+
+#include "hw/sysbus.h"
+#include "qemu/timer.h"
+#define TYPE_NRF51_TIMER "nrf51_soc.timer"
+#define NRF51_TIMER(obj) OBJECT_CHECK(NRF51TimerState, (obj), TYPE_NRF51_TIMER)
+
+#define NRF51_TIMER_REG_COUNT 4
+
+#define NRF51_TIMER_TASK_START 0x000
+#define NRF51_TIMER_TASK_STOP 0x004
+#define NRF51_TIMER_TASK_COUNT 0x008
+#define NRF51_TIMER_TASK_CLEAR 0x00C
+#define NRF51_TIMER_TASK_SHUTDOWN 0x010
+#define NRF51_TIMER_TASK_CAPTURE_0 0x040
+#define NRF51_TIMER_TASK_CAPTURE_3 0x04C
+
+#define NRF51_TIMER_EVENT_COMPARE_0 0x140
+#define NRF51_TIMER_EVENT_COMPARE_1 0x144
+#define NRF51_TIMER_EVENT_COMPARE_2 0x148
+#define NRF51_TIMER_EVENT_COMPARE_3 0x14C
+
+#define NRF51_TIMER_REG_SHORTS 0x200
+#define NRF51_TIMER_REG_SHORTS_MASK 0xf0f
+#define NRF51_TIMER_REG_INTENSET 0x304
+#define NRF51_TIMER_REG_INTENCLR 0x308
+#define NRF51_TIMER_REG_INTEN_MASK 0xf0000
+#define NRF51_TIMER_REG_MODE 0x504
+#define NRF51_TIMER_REG_MODE_MASK 0x01
+#define NRF51_TIMER_TIMER 0
+#define NRF51_TIMER_COUNTER 1
+#define NRF51_TIMER_REG_BITMODE 0x508
+#define NRF51_TIMER_REG_BITMODE_MASK 0x03
+#define NRF51_TIMER_WIDTH_16 0
+#define NRF51_TIMER_WIDTH_8 1
+#define NRF51_TIMER_WIDTH_24 2
+#define NRF51_TIMER_WIDTH_32 3
+#define NRF51_TIMER_REG_PRESCALER 0x510
+#define NRF51_TIMER_REG_PRESCALER_MASK 0x0F
+#define NRF51_TIMER_REG_CC0 0x540
+#define NRF51_TIMER_REG_CC3 0x54C
+
+typedef struct NRF51TimerState {
+    SysBusDevice parent_obj;
+
+    MemoryRegion iomem;
+    qemu_irq irq;
+
+    QEMUTimer timer;
+    int64_t timer_start_ns;
+    int64_t update_counter_ns;
+    uint32_t counter;
+
+    bool running;
+
+    uint8_t events_compare[NRF51_TIMER_REG_COUNT];
+    uint32_t cc[NRF51_TIMER_REG_COUNT];
+    uint32_t shorts;
+    uint32_t inten;
+    uint32_t mode;
+    uint32_t bitmode;
+    uint32_t prescaler;
+
+} NRF51TimerState;
+
+
+#endif
diff --git a/hw/timer/nrf51_timer.c b/hw/timer/nrf51_timer.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/timer/nrf51_timer.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * nRF51 System-on-Chip Timer peripheral
+ *
+ * Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
+ * Product Spec: http://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.1.pdf
+ *
+ * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de>
+ * Copyright (c) 2019 Red Hat, Inc.
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/arm/nrf51.h"
+#include "hw/timer/nrf51_timer.h"
+#include "trace.h"
+
+#define TIMER_CLK_FREQ 16000000UL
+
+static uint32_t const bitwidths[] = {16, 8, 24, 32};
+
+static uint32_t ns_to_ticks(NRF51TimerState *s, int64_t ns)
+{
+    uint32_t freq = TIMER_CLK_FREQ >> s->prescaler;
+
+    return muldiv64(ns, freq, NANOSECONDS_PER_SECOND);
+}
+
+static int64_t ticks_to_ns(NRF51TimerState *s, uint32_t ticks)
+{
+    uint32_t freq = TIMER_CLK_FREQ >> s->prescaler;
+
+    return muldiv64(ticks, NANOSECONDS_PER_SECOND, freq);
+}
+
+/* Returns number of ticks since last call */
+static uint32_t update_counter(NRF51TimerState *s, int64_t now)
+{
+    uint32_t ticks = ns_to_ticks(s, now - s->update_counter_ns);
+
+    s->counter = (s->counter + ticks) % BIT(bitwidths[s->bitmode]);
+    s->update_counter_ns = now;
+    return ticks;
+}
+
+/* Assumes s->counter is up-to-date */
+static void rearm_timer(NRF51TimerState *s, int64_t now)
+{
+    int64_t min_ns = INT64_MAX;
+    size_t i;
+
+    for (i = 0; i < NRF51_TIMER_REG_COUNT; i++) {
+        int64_t delta_ns;
+
+        if (s->events_compare[i]) {
+            continue; /* already expired, ignore it for now */
+        }
+
+        if (s->cc[i] <= s->counter) {
+            delta_ns = ticks_to_ns(s, BIT(bitwidths[s->bitmode]) -
+                                      s->counter + s->cc[i]);
+        } else {
+            delta_ns = ticks_to_ns(s, s->cc[i] - s->counter);
+        }
+
+        if (delta_ns < min_ns) {
+            min_ns = delta_ns;
+        }
+    }
+
+    if (min_ns != INT64_MAX) {
+        timer_mod_ns(&s->timer, now + min_ns);
+    }
+}
+
+static void update_irq(NRF51TimerState *s)
+{
+    bool flag = false;
+    size_t i;
+
+    for (i = 0; i < NRF51_TIMER_REG_COUNT; i++) {
+        flag |= s->events_compare[i] && extract32(s->inten, 16 + i, 1);
+    }
+    qemu_set_irq(s->irq, flag);
+}
+
+static void timer_expire(void *opaque)
+{
+    NRF51TimerState *s = NRF51_TIMER(opaque);
+    int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+    uint32_t cc_remaining[NRF51_TIMER_REG_COUNT];
+    bool should_stop = false;
+    uint32_t ticks;
+    size_t i;
+
+    for (i = 0; i < NRF51_TIMER_REG_COUNT; i++) {
+        if (s->cc[i] > s->counter) {
+            cc_remaining[i] = s->cc[i] - s->counter;
+        } else {
+            cc_remaining[i] = BIT(bitwidths[s->bitmode]) -
+                              s->counter + s->cc[i];
+        }
+    }
+
+    ticks = update_counter(s, now);
+
+    for (i = 0; i < NRF51_TIMER_REG_COUNT; i++) {
+        if (cc_remaining[i] <= ticks) {
+            s->events_compare[i] = 1;
+
+            if (s->shorts & BIT(i)) {
+                s->timer_start_ns = now;
+                s->update_counter_ns = s->timer_start_ns;
+                s->counter = 0;
+            }
+
+            should_stop |= s->shorts & BIT(i + 8);
+        }
+    }
+
+    update_irq(s);
+
+    if (should_stop) {
+        s->running = false;
+        timer_del(&s->timer);
+    } else {
+        rearm_timer(s, now);
+    }
+}
+
+static void counter_compare(NRF51TimerState *s)
+{
+    uint32_t counter = s->counter;
+    size_t i;
+
+    for (i = 0; i < NRF51_TIMER_REG_COUNT; i++) {
+        if (counter == s->cc[i]) {
+            s->events_compare[i] = 1;
+
+            if (s->shorts & BIT(i)) {
+                s->counter = 0;
+            }
+        }
+    }
+}
+
+static uint64_t nrf51_timer_read(void *opaque, hwaddr offset, unsigned int size)
+{
+    NRF51TimerState *s = NRF51_TIMER(opaque);
+    uint64_t r = 0;
+
+    switch (offset) {
+    case NRF51_TIMER_EVENT_COMPARE_0 ... NRF51_TIMER_EVENT_COMPARE_3:
+        r = s->events_compare[(offset - NRF51_TIMER_EVENT_COMPARE_0) / 4];
+        break;
+    case NRF51_TIMER_REG_SHORTS:
+        r = s->shorts;
+        break;
+    case NRF51_TIMER_REG_INTENSET:
+        r = s->inten;
+        break;
+    case NRF51_TIMER_REG_INTENCLR:
+        r = s->inten;
+        break;
+    case NRF51_TIMER_REG_MODE:
+        r = s->mode;
+        break;
+    case NRF51_TIMER_REG_BITMODE:
+        r = s->bitmode;
+        break;
+    case NRF51_TIMER_REG_PRESCALER:
+        r = s->prescaler;
+        break;
+    case NRF51_TIMER_REG_CC0 ... NRF51_TIMER_REG_CC3:
+        r = s->cc[(offset - NRF51_TIMER_REG_CC0) / 4];
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                "%s: bad read offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+    }
+
+    trace_nrf51_timer_read(offset, r, size);
+
+    return r;
+}
+
+static void nrf51_timer_write(void *opaque, hwaddr offset,
+                       uint64_t value, unsigned int size)
+{
+    NRF51TimerState *s = NRF51_TIMER(opaque);
+    uint64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+    size_t idx;
+
+    trace_nrf51_timer_write(offset, value, size);
+
+    switch (offset) {
+    case NRF51_TIMER_TASK_START:
+        if (value == NRF51_TRIGGER_TASK && s->mode == NRF51_TIMER_TIMER) {
+            s->running = true;
+            s->timer_start_ns = now - ticks_to_ns(s, s->counter);
+            s->update_counter_ns = s->timer_start_ns;
+            rearm_timer(s, now);
+        }
+        break;
+    case NRF51_TIMER_TASK_STOP:
+    case NRF51_TIMER_TASK_SHUTDOWN:
+        if (value == NRF51_TRIGGER_TASK) {
+            s->running = false;
+            timer_del(&s->timer);
+        }
+        break;
+    case NRF51_TIMER_TASK_COUNT:
+        if (value == NRF51_TRIGGER_TASK && s->mode == NRF51_TIMER_COUNTER) {
+            s->counter = (s->counter + 1) % BIT(bitwidths[s->bitmode]);
+            counter_compare(s);
+        }
+        break;
+    case NRF51_TIMER_TASK_CLEAR:
+        if (value == NRF51_TRIGGER_TASK) {
+            s->timer_start_ns = now;
+            s->update_counter_ns = s->timer_start_ns;
+            s->counter = 0;
+            if (s->running) {
+                rearm_timer(s, now);
+            }
+        }
+        break;
+    case NRF51_TIMER_TASK_CAPTURE_0 ... NRF51_TIMER_TASK_CAPTURE_3:
+        if (value == NRF51_TRIGGER_TASK) {
+            if (s->running) {
+                timer_expire(s); /* update counter and all state */
+            }
+
+            idx = (offset - NRF51_TIMER_TASK_CAPTURE_0) / 4;
+            s->cc[idx] = s->counter;
+        }
+        break;
+    case NRF51_TIMER_EVENT_COMPARE_0 ... NRF51_TIMER_EVENT_COMPARE_3:
+        if (value == NRF51_EVENT_CLEAR) {
+            s->events_compare[(offset - NRF51_TIMER_EVENT_COMPARE_0) / 4] = 0;
+
+            if (s->running) {
+                timer_expire(s); /* update counter and all state */
+            }
+        }
+        break;
+    case NRF51_TIMER_REG_SHORTS:
+        s->shorts = value & NRF51_TIMER_REG_SHORTS_MASK;
+        break;
+    case NRF51_TIMER_REG_INTENSET:
+        s->inten |= value & NRF51_TIMER_REG_INTEN_MASK;
+        break;
+    case NRF51_TIMER_REG_INTENCLR:
+        s->inten &= ~(value & NRF51_TIMER_REG_INTEN_MASK);
+        break;
+    case NRF51_TIMER_REG_MODE:
+        s->mode = value;
+        break;
+    case NRF51_TIMER_REG_BITMODE:
+        if (s->mode == NRF51_TIMER_TIMER && s->running) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                    "%s: erroneous change of BITMODE while timer is running\n",
+                    __func__);
+        }
+        s->bitmode = value & NRF51_TIMER_REG_BITMODE_MASK;
+        break;
+    case NRF51_TIMER_REG_PRESCALER:
+        if (s->mode == NRF51_TIMER_TIMER && s->running) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                "%s: erroneous change of PRESCALER while timer is running\n",
+                __func__);
+        }
+        s->prescaler = value & NRF51_TIMER_REG_PRESCALER_MASK;
+        break;
+    case NRF51_TIMER_REG_CC0 ... NRF51_TIMER_REG_CC3:
+        if (s->running) {
+            timer_expire(s); /* update counter */
+        }
+
+        idx = (offset - NRF51_TIMER_REG_CC0) / 4;
+        s->cc[idx] = value % BIT(bitwidths[s->bitmode]);
+
+        if (s->running) {
+            rearm_timer(s, now);
+        }
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: bad write offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+    }
+
+    update_irq(s);
+}
+
+static const MemoryRegionOps rng_ops = {
+    .read =  nrf51_timer_read,
+    .write = nrf51_timer_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .impl.min_access_size = 4,
+    .impl.max_access_size = 4,
+};
+
+static void nrf51_timer_init(Object *obj)
+{
+    NRF51TimerState *s = NRF51_TIMER(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+
+    memory_region_init_io(&s->iomem, obj, &rng_ops, s,
+            TYPE_NRF51_TIMER, NRF51_TIMER_SIZE);
+    sysbus_init_mmio(sbd, &s->iomem);
+    sysbus_init_irq(sbd, &s->irq);
+
+    timer_init_ns(&s->timer, QEMU_CLOCK_VIRTUAL, timer_expire, s);
+}
+
+static void nrf51_timer_reset(DeviceState *dev)
+{
+    NRF51TimerState *s = NRF51_TIMER(dev);
+
+    timer_del(&s->timer);
+    s->timer_start_ns = 0x00;
+    s->update_counter_ns = 0x00;
+    s->counter = 0x00;
+    s->running = false;
+
+    memset(s->events_compare, 0x00, sizeof(s->events_compare));
+    memset(s->cc, 0x00, sizeof(s->cc));
+
+    s->shorts = 0x00;
+    s->inten = 0x00;
+    s->mode = 0x00;
+    s->bitmode = 0x00;
+    s->prescaler = 0x00;
+}
+
+static int nrf51_timer_post_load(void *opaque, int version_id)
+{
+    NRF51TimerState *s = NRF51_TIMER(opaque);
+
+    if (s->running && s->mode == NRF51_TIMER_TIMER) {
+        timer_expire(s);
+    }
+    return 0;
+}
+
+static const VMStateDescription vmstate_nrf51_timer = {
+    .name = TYPE_NRF51_TIMER,
+    .version_id = 1,
+    .post_load = nrf51_timer_post_load,
+    .fields = (VMStateField[]) {
+        VMSTATE_TIMER(timer, NRF51TimerState),
+        VMSTATE_INT64(timer_start_ns, NRF51TimerState),
+        VMSTATE_INT64(update_counter_ns, NRF51TimerState),
+        VMSTATE_UINT32(counter, NRF51TimerState),
+        VMSTATE_BOOL(running, NRF51TimerState),
+        VMSTATE_UINT8_ARRAY(events_compare, NRF51TimerState,
+                            NRF51_TIMER_REG_COUNT),
+        VMSTATE_UINT32_ARRAY(cc, NRF51TimerState, NRF51_TIMER_REG_COUNT),
+        VMSTATE_UINT32(shorts, NRF51TimerState),
+        VMSTATE_UINT32(inten, NRF51TimerState),
+        VMSTATE_UINT32(mode, NRF51TimerState),
+        VMSTATE_UINT32(bitmode, NRF51TimerState),
+        VMSTATE_UINT32(prescaler, NRF51TimerState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void nrf51_timer_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->reset = nrf51_timer_reset;
+    dc->vmsd = &vmstate_nrf51_timer;
+}
+
+static const TypeInfo nrf51_timer_info = {
+    .name = TYPE_NRF51_TIMER,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(NRF51TimerState),
+    .instance_init = nrf51_timer_init,
+    .class_init = nrf51_timer_class_init
+};
+
+static void nrf51_timer_register_types(void)
+{
+    type_register_static(&nrf51_timer_info);
+}
+
+type_init(nrf51_timer_register_types)
diff --git a/hw/timer/trace-events b/hw/timer/trace-events
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/trace-events
+++ b/hw/timer/trace-events
@@ -XXX,XX +XXX,XX @@ sun4v_rtc_write(uint64_t addr, uint64_t value) "write: addr 0x%" PRIx64 " value
 
 # hw/timer/xlnx-zynqmp-rtc.c
 xlnx_zynqmp_rtc_gettime(int year, int month, int day, int hour, int min, int sec) "Get time from host: %d-%d-%d %2d:%02d:%02d"
+
+# hw/timer/nrf51_timer.c
+nrf51_timer_read(uint64_t addr, uint32_t value, unsigned size) "read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u"
+nrf51_timer_write(uint64_t addr, uint32_t value, unsigned size) "write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u"
+
-- 
2.19.2

From: Steffen Görtz <contrib@steffen-goertz.de>

Instantiates TIMER0 - TIMER2

diff --git a/include/hw/arm/nrf51_soc.h b/include/hw/arm/nrf51_soc.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/nrf51_soc.h
+++ b/include/hw/arm/nrf51_soc.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/char/nrf51_uart.h"
 #include "hw/misc/nrf51_rng.h"
 #include "hw/gpio/nrf51_gpio.h"
+#include "hw/timer/nrf51_timer.h"
 
 #define TYPE_NRF51_SOC "nrf51-soc"
 #define NRF51_SOC(obj) \
     OBJECT_CHECK(NRF51State, (obj), TYPE_NRF51_SOC)
 
+#define NRF51_NUM_TIMERS 3
+
 typedef struct NRF51State {
     /*< private >*/
     SysBusDevice parent_obj;
@@ -XXX,XX +XXX,XX @@ typedef struct NRF51State {
     NRF51UARTState uart;
     NRF51RNGState rng;
     NRF51GPIOState gpio;
+    NRF51TimerState timer[NRF51_NUM_TIMERS];
 
     MemoryRegion iomem;
     MemoryRegion sram;
diff --git a/hw/arm/nrf51_soc.c b/hw/arm/nrf51_soc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/nrf51_soc.c
+++ b/hw/arm/nrf51_soc.c
@@ -XXX,XX +XXX,XX @@ static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp)
     NRF51State *s = NRF51_SOC(dev_soc);
     MemoryRegion *mr;
     Error *err = NULL;
+    uint8_t i = 0;
+    hwaddr base_addr = 0;
 
     if (!s->board_memory) {
         error_setg(errp, "memory property was not set");
@@ -XXX,XX +XXX,XX @@ static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp)
     /* Pass all GPIOs to the SOC layer so they are available to the board */
     qdev_pass_gpios(DEVICE(&s->gpio), dev_soc, NULL);
 
+    /* TIMER */
+    for (i = 0; i < NRF51_NUM_TIMERS; i++) {
+        object_property_set_bool(OBJECT(&s->timer[i]), true, "realized", &err);
+        if (err) {
+            error_propagate(errp, err);
+            return;
+        }
+
+        base_addr = NRF51_TIMER_BASE + i * NRF51_TIMER_SIZE;
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->timer[i]), 0, base_addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer[i]), 0,
+                           qdev_get_gpio_in(DEVICE(&s->cpu),
+                                            BASE_TO_IRQ(base_addr)));
+    }
+
     create_unimplemented_device("nrf51_soc.io", NRF51_IOMEM_BASE,
                                 NRF51_IOMEM_SIZE);
     create_unimplemented_device("nrf51_soc.ficr", NRF51_FICR_BASE,
@@ -XXX,XX +XXX,XX @@ static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp)
 
 static void nrf51_soc_init(Object *obj)
 {
+    uint8_t i = 0;
+
     NRF51State *s = NRF51_SOC(obj);
 
     memory_region_init(&s->container, obj, "nrf51-container", UINT64_MAX);
@@ -XXX,XX +XXX,XX @@ static void nrf51_soc_init(Object *obj)
 
     sysbus_init_child_obj(obj, "gpio", &s->gpio, sizeof(s->gpio),
                           TYPE_NRF51_GPIO);
+
+    for (i = 0; i < NRF51_NUM_TIMERS; i++) {
+        sysbus_init_child_obj(obj, "timer[*]", &s->timer[i],
+                              sizeof(s->timer[i]), TYPE_NRF51_TIMER);
+
+    }
 }
 
 static Property nrf51_soc_properties[] = {
-- 
2.19.2

From: Steffen Görtz <contrib@steffen-goertz.de>

Basic tests for nRF51 Timer Peripheral.

Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-11-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 tests/microbit-test.c | 95 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/tests/microbit-test.c b/tests/microbit-test.c
index XXXXXXX..XXXXXXX 100644
--- a/tests/microbit-test.c
+++ b/tests/microbit-test.c
@@ -XXX,XX +XXX,XX @@
 
 #include "hw/arm/nrf51.h"
 #include "hw/gpio/nrf51_gpio.h"
+#include "hw/timer/nrf51_timer.h"
 
 static void test_nrf51_gpio(void)
 {
@@ -XXX,XX +XXX,XX @@ static void test_nrf51_gpio(void)
     qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 0);
 }
 
+static void timer_task(hwaddr task)
+{
+    writel(NRF51_TIMER_BASE + task, NRF51_TRIGGER_TASK);
+}
+
+static void timer_clear_event(hwaddr event)
+{
+    writel(NRF51_TIMER_BASE + event, NRF51_EVENT_CLEAR);
+}
+
+static void timer_set_bitmode(uint8_t mode)
+{
+    writel(NRF51_TIMER_BASE + NRF51_TIMER_REG_BITMODE, mode);
+}
+
+static void timer_set_prescaler(uint8_t prescaler)
+{
+    writel(NRF51_TIMER_BASE + NRF51_TIMER_REG_PRESCALER, prescaler);
+}
+
+static void timer_set_cc(size_t idx, uint32_t value)
+{
+    writel(NRF51_TIMER_BASE + NRF51_TIMER_REG_CC0 + idx * 4, value);
+}
+
+static void timer_assert_events(uint32_t ev0, uint32_t ev1, uint32_t ev2,
+                                uint32_t ev3)
+{
+    g_assert(readl(NRF51_TIMER_BASE + NRF51_TIMER_EVENT_COMPARE_0) == ev0);
+    g_assert(readl(NRF51_TIMER_BASE + NRF51_TIMER_EVENT_COMPARE_1) == ev1);
+    g_assert(readl(NRF51_TIMER_BASE + NRF51_TIMER_EVENT_COMPARE_2) == ev2);
+    g_assert(readl(NRF51_TIMER_BASE + NRF51_TIMER_EVENT_COMPARE_3) == ev3);
+}
+
+static void test_nrf51_timer(void)
+{
+    uint32_t steps_to_overflow = 408;
+
+    /* Compare Match */
+    timer_task(NRF51_TIMER_TASK_STOP);
+    timer_task(NRF51_TIMER_TASK_CLEAR);
+
+    timer_clear_event(NRF51_TIMER_EVENT_COMPARE_0);
+    timer_clear_event(NRF51_TIMER_EVENT_COMPARE_1);
+    timer_clear_event(NRF51_TIMER_EVENT_COMPARE_2);
+    timer_clear_event(NRF51_TIMER_EVENT_COMPARE_3);
+
+    timer_set_bitmode(NRF51_TIMER_WIDTH_16); /* 16 MHz Timer */
+    timer_set_prescaler(0);
+    /* Swept over in first step */
+    timer_set_cc(0, 2);
+    /* Barely miss on first step */
+    timer_set_cc(1, 162);
+    /* Spot on on third step */
+    timer_set_cc(2, 480);
+
+    timer_assert_events(0, 0, 0, 0);
+
+    timer_task(NRF51_TIMER_TASK_START);
+    clock_step(10000);
+    timer_assert_events(1, 0, 0, 0);
+
+    /* Swept over on first overflow */
+    timer_set_cc(3, 114);
+
+    clock_step(10000);
+    timer_assert_events(1, 1, 0, 0);
+
+    clock_step(10000);
+    timer_assert_events(1, 1, 1, 0);
+
+    /* Wrap time until internal counter overflows */
+    while (steps_to_overflow--) {
+        timer_assert_events(1, 1, 1, 0);
+        clock_step(10000);
+    }
+
+    timer_assert_events(1, 1, 1, 1);
+
+    timer_clear_event(NRF51_TIMER_EVENT_COMPARE_0);
+    timer_clear_event(NRF51_TIMER_EVENT_COMPARE_1);
+    timer_clear_event(NRF51_TIMER_EVENT_COMPARE_2);
+    timer_clear_event(NRF51_TIMER_EVENT_COMPARE_3);
+    timer_assert_events(0, 0, 0, 0);
+
+    timer_task(NRF51_TIMER_TASK_STOP);
+
+    /* Test Proposal: Stop/Shutdown */
+    /* Test Proposal: Shortcut Compare -> Clear */
+    /* Test Proposal: Shortcut Compare -> Stop */
+    /* Test Proposal: Counter Mode */
+}
+
 int main(int argc, char **argv)
 {
     int ret;
@@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv)
     global_qtest = qtest_initf("-machine microbit");
 
     qtest_add_func("/microbit/nrf51/gpio", test_nrf51_gpio);
+    qtest_add_func("/microbit/nrf51/timer", test_nrf51_timer);
 
     ret = g_test_run();
 
-- 
2.19.2

From: Steffen Görtz <contrib@steffen-goertz.de>

This stubs enables the microbit-micropython firmware to run
on the microbit machine.

Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-12-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/nrf51_soc.h |  1 +
 hw/arm/nrf51_soc.c         | 26 ++++++++++++++++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/include/hw/arm/nrf51_soc.h b/include/hw/arm/nrf51_soc.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/nrf51_soc.h
+++ b/include/hw/arm/nrf51_soc.h
@@ -XXX,XX +XXX,XX @@ typedef struct NRF51State {
     MemoryRegion iomem;
     MemoryRegion sram;
     MemoryRegion flash;
+    MemoryRegion clock;
 
     uint32_t sram_size;
     uint32_t flash_size;
diff --git a/hw/arm/nrf51_soc.c b/hw/arm/nrf51_soc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/nrf51_soc.c
+++ b/hw/arm/nrf51_soc.c
@@ -XXX,XX +XXX,XX @@
 
 #define BASE_TO_IRQ(base) ((base >> 12) & 0x1F)
 
+static uint64_t clock_read(void *opaque, hwaddr addr, unsigned int size)
+{
+    qemu_log_mask(LOG_UNIMP, "%s: 0x%" HWADDR_PRIx " [%u]\n",
+                  __func__, addr, size);
+    return 1;
+}
+
+static void clock_write(void *opaque, hwaddr addr, uint64_t data,
+                        unsigned int size)
+{
+    qemu_log_mask(LOG_UNIMP, "%s: 0x%" HWADDR_PRIx " <- 0x%" PRIx64 " [%u]\n",
+                  __func__, addr, data, size);
+}
+
+static const MemoryRegionOps clock_ops = {
+    .read = clock_read,
+    .write = clock_write
+};
+
+
 static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp)
 {
     NRF51State *s = NRF51_SOC(dev_soc);
@@ -XXX,XX +XXX,XX @@ static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp)
                                             BASE_TO_IRQ(base_addr)));
     }
 
+    /* STUB Peripherals */
+    memory_region_init_io(&s->clock, NULL, &clock_ops, NULL,
+                          "nrf51_soc.clock", 0x1000);
+    memory_region_add_subregion_overlap(&s->container,
+                                        NRF51_IOMEM_BASE, &s->clock, -1);
+
     create_unimplemented_device("nrf51_soc.io", NRF51_IOMEM_BASE,
                                 NRF51_IOMEM_SIZE);
     create_unimplemented_device("nrf51_soc.ficr", NRF51_FICR_BASE,
-- 
2.19.2

Now that MTTCG is here, the comment in the 32-bit Arm decoder that
"Since the emulation does not have barriers, the acquire/release
semantics need no special handling" is no longer true. Emit the
correct barriers for the load-acquire/store-release insns, as
we already do in the A64 decoder.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
 target/arm/translate.c | 33 ++++++++++++++++++++++++++-------
 1 file changed, 26 insertions(+), 7 deletions(-)

diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn)
                     rd = (insn >> 12) & 0xf;
                     if (insn & (1 << 23)) {
                         /* load/store exclusive */
+                        bool is_ld = extract32(insn, 20, 1);
+                        bool is_lasr = !extract32(insn, 8, 1);
                         int op2 = (insn >> 8) & 3;
                         op1 = (insn >> 21) & 0x3;
 
@@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn)
                         addr = tcg_temp_local_new_i32();
                         load_reg_var(s, addr, rn);
 
-                        /* Since the emulation does not have barriers,
-                           the acquire/release semantics need no special
-                           handling */
+                        if (is_lasr && !is_ld) {
+                            tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL);
+                        }
+
                         if (op2 == 0) {
-                            if (insn & (1 << 20)) {
+                            if (is_ld) {
                                 tmp = tcg_temp_new_i32();
                                 switch (op1) {
                                 case 0: /* lda */
@@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn)
                                 }
                                 tcg_temp_free_i32(tmp);
                             }
-                        } else if (insn & (1 << 20)) {
+                        } else if (is_ld) {
                             switch (op1) {
                             case 0: /* ldrex */
                                 gen_load_exclusive(s, rd, 15, addr, 2);
@@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn)
                             }
                         }
                         tcg_temp_free_i32(addr);
+
+                        if (is_lasr && is_ld) {
+                            tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ);
+                        }
                     } else if ((insn & 0x00300f00) == 0) {
                         /* 0bcccc_0001_0x00_xxxx_xxxx_0000_1001_xxxx
                         *  - SWP, SWPB
@@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn)
                 tcg_gen_addi_i32(tmp, tmp, s->pc);
                 store_reg(s, 15, tmp);
             } else {
+                bool is_lasr = false;
+                bool is_ld = extract32(insn, 20, 1);
                 int op2 = (insn >> 6) & 0x3;
                 op = (insn >> 4) & 0x3;
                 switch (op2) {
@@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn)
                 case 3:
                     /* Load-acquire/store-release exclusive */
                     ARCH(8);
+                    is_lasr = true;
                     break;
                 }
+
+                if (is_lasr && !is_ld) {
+                    tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL);
+                }
+
                 addr = tcg_temp_local_new_i32();
                 load_reg_var(s, addr, rn);
                 if (!(op2 & 1)) {
-                    if (insn & (1 << 20)) {
+                    if (is_ld) {
                         tmp = tcg_temp_new_i32();
                         switch (op) {
                         case 0: /* ldab */
@@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn)
                         }
                         tcg_temp_free_i32(tmp);
                     }
-                } else if (insn & (1 << 20)) {
+                } else if (is_ld) {
                     gen_load_exclusive(s, rs, rd, addr, op);
                 } else {
                     gen_store_exclusive(s, rm, rs, rd, addr, op);
                 }
                 tcg_temp_free_i32(addr);
+
+                if (is_lasr && is_ld) {
+                    tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ);
+                }
             }
         } else {
             /* Load/store multiple, RFE, SRS.  */
-- 
2.19.2

In the TZ Memory Protection Controller, the BLK_MAX register is supposed
to return the maximum permitted value of the BLK_IDX register. Our
implementation incorrectly returned max+1 (ie the total number of
valid index values, since BLK_IDX is zero-based).

Correct this off-by-one error. Since we consistently initialize
and use s->blk_max throughout the implementation as the 'size'
of the LUT, just adjust the value we return when the guest reads
the BLK_MAX register, rather than trying to change the semantics
of the s->blk_max internal struct field.

Fixes: https://bugs.launchpad.net/qemu/+bug/1806824
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181213183249.3468-1-peter.maydell@linaro.org
---
 hw/misc/tz-mpc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/misc/tz-mpc.c b/hw/misc/tz-mpc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/tz-mpc.c
+++ b/hw/misc/tz-mpc.c
@@ -XXX,XX +XXX,XX @@ static MemTxResult tz_mpc_reg_read(void *opaque, hwaddr addr,
         r = s->ctrl;
         break;
     case A_BLK_MAX:
-        r = s->blk_max;
+        r = s->blk_max - 1;
         break;
     case A_BLK_CFG:
         /* We are never in "init in progress state", so this just indicates
-- 
2.19.2

From: Nick Hudson <nick.hudson@gmx.co.uk>

noload kernels are loaded with the u-boot image header and as a result
the header size needs adding to the entry point.  Fake up a hdr so the
kernel image is loaded at the right address and the entry point is
adjusted appropriately.

The default location for the uboot file is 32MiB above bottom of DRAM.
This matches the recommendation in Documentation/arm/Booting.

Clarify the load_uimage API to state the passing of a load address when an
image doesn't specify one, or when loading a ramdisk is expected.

Adjust callers of load_uimage, etc.

Signed-off-by: Nick Hudson <skrll@netbsd.org>
Message-id: 11488a08-1fe0-a278-2210-deb64731107f@gmx.co.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/core/uboot_image.h  |  1 +
 include/hw/loader.h    |  7 ++++++-
 hw/arm/boot.c          |  8 +++++---
 hw/core/loader.c       | 19 ++++++++++++++++---
 hw/microblaze/boot.c   |  2 +-
 hw/nios2/boot.c        |  2 +-
 hw/ppc/e500.c          |  1 +
 hw/ppc/ppc440_bamboo.c |  2 +-
 hw/ppc/sam460ex.c      |  2 +-
 9 files changed, 33 insertions(+), 11 deletions(-)

diff --git a/hw/core/uboot_image.h b/hw/core/uboot_image.h
index XXXXXXX..XXXXXXX 100644
--- a/hw/core/uboot_image.h
+++ b/hw/core/uboot_image.h
@@ -XXX,XX +XXX,XX @@
 #define IH_TYPE_SCRIPT		6	/* Script file			*/
 #define IH_TYPE_FILESYSTEM	7	/* Filesystem Image (any type)	*/
 #define IH_TYPE_FLATDT		8	/* Binary Flat Device Tree Blob	*/
+#define IH_TYPE_KERNEL_NOLOAD  14	/* OS Kernel Image (noload)	*/
 
 /*
  * Compression Types
diff --git a/include/hw/loader.h b/include/hw/loader.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/loader.h
+++ b/include/hw/loader.h
@@ -XXX,XX +XXX,XX @@ void load_elf_hdr(const char *filename, void *hdr, bool *is64, Error **errp);
 int load_aout(const char *filename, hwaddr addr, int max_sz,
               int bswap_needed, hwaddr target_page_size);
 
+#define LOAD_UIMAGE_LOADADDR_INVALID (-1)
+
 /** load_uimage_as:
  * @filename: Path of uimage file
  * @ep: Populated with program entry point. Ignored if NULL.
- * @loadaddr: Populated with the load address. Ignored if NULL.
+ * @loadaddr: load address if none specified in the image or when loading a
+ *            ramdisk. Populated with the load address. Ignored if NULL or
+ *            LOAD_UIMAGE_LOADADDR_INVALID (images which do not specify a load
+ *            address will not be loadable).
  * @is_linux: Is set to true if the image loaded is Linux. Ignored if NULL.
  * @translate_fn: optional function to translate load addresses
  * @translate_opaque: opaque data passed to @translate_fn
diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -XXX,XX +XXX,XX @@
  * Documentation/arm/Booting and Documentation/arm64/booting.txt
  * They have different preferred image load offsets from system RAM base.
  */
-#define KERNEL_ARGS_ADDR 0x100
-#define KERNEL_LOAD_ADDR 0x00010000
+#define KERNEL_ARGS_ADDR   0x100
+#define KERNEL_NOLOAD_ADDR 0x02000000
+#define KERNEL_LOAD_ADDR   0x00010000
 #define KERNEL64_LOAD_ADDR 0x00080000
 
 #define ARM64_TEXT_OFFSET_OFFSET    8
@@ -XXX,XX +XXX,XX @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info)
     }
     entry = elf_entry;
     if (kernel_size < 0) {
-        kernel_size = load_uimage_as(info->kernel_filename, &entry, NULL,
+        uint64_t loadaddr = info->loader_start + KERNEL_NOLOAD_ADDR;
+        kernel_size = load_uimage_as(info->kernel_filename, &entry, &loadaddr,
                                      &is_linux, NULL, NULL, as);
     }
     if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64) && kernel_size < 0) {
diff --git a/hw/core/loader.c b/hw/core/loader.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/core/loader.c
+++ b/hw/core/loader.c
@@ -XXX,XX +XXX,XX @@ static int load_uboot_image(const char *filename, hwaddr *ep, hwaddr *loadaddr,
         goto out;
 
     if (hdr->ih_type != image_type) {
-        fprintf(stderr, "Wrong image type %d, expected %d\n", hdr->ih_type,
-                image_type);
-        goto out;
+        if (!(image_type == IH_TYPE_KERNEL &&
+            hdr->ih_type == IH_TYPE_KERNEL_NOLOAD)) {
+            fprintf(stderr, "Wrong image type %d, expected %d\n", hdr->ih_type,
+                    image_type);
+            goto out;
+        }
     }
 
     /* TODO: Implement other image types.  */
     switch (hdr->ih_type) {
+    case IH_TYPE_KERNEL_NOLOAD:
+        if (!loadaddr || *loadaddr == LOAD_UIMAGE_LOADADDR_INVALID) {
+            fprintf(stderr, "this image format (kernel_noload) cannot be "
+                    "loaded on this machine type");
+            goto out;
+        }
+
+        hdr->ih_load = *loadaddr + sizeof(*hdr);
+        hdr->ih_ep += hdr->ih_load;
+        /* fall through */
     case IH_TYPE_KERNEL:
         address = hdr->ih_load;
         if (translate_fn) {
diff --git a/hw/microblaze/boot.c b/hw/microblaze/boot.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/microblaze/boot.c
+++ b/hw/microblaze/boot.c
@@ -XXX,XX +XXX,XX @@ void microblaze_load_kernel(MicroBlazeCPU *cpu, hwaddr ddr_base,
 
         /* If it wasn't an ELF image, try an u-boot image.  */
         if (kernel_size < 0) {
-            hwaddr uentry, loadaddr;
+            hwaddr uentry, loadaddr = LOAD_UIMAGE_LOADADDR_INVALID;
 
             kernel_size = load_uimage(kernel_filename, &uentry, &loadaddr, 0,
                                       NULL, NULL);
diff --git a/hw/nios2/boot.c b/hw/nios2/boot.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/nios2/boot.c
+++ b/hw/nios2/boot.c
@@ -XXX,XX +XXX,XX @@ void nios2_load_kernel(Nios2CPU *cpu, hwaddr ddr_base,
 
         /* If it wasn't an ELF image, try an u-boot image. */
         if (kernel_size < 0) {
-            hwaddr uentry, loadaddr;
+            hwaddr uentry, loadaddr = LOAD_UIMAGE_LOADADDR_INVALID;
 
             kernel_size = load_uimage(kernel_filename, &uentry, &loadaddr, 0,
                                       NULL, NULL);
diff --git a/hw/ppc/e500.c b/hw/ppc/e500.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/ppc/e500.c
+++ b/hw/ppc/e500.c
@@ -XXX,XX +XXX,XX @@ void ppce500_init(MachineState *machine)
          * Hrm. No ELF image? Try a uImage, maybe someone is giving us an
          * ePAPR compliant kernel
          */
+        loadaddr = LOAD_UIMAGE_LOADADDR_INVALID;
         payload_size = load_uimage(filename, &bios_entry, &loadaddr, NULL,
                                    NULL, NULL);
         if (payload_size < 0) {
diff --git a/hw/ppc/ppc440_bamboo.c b/hw/ppc/ppc440_bamboo.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/ppc/ppc440_bamboo.c
+++ b/hw/ppc/ppc440_bamboo.c
@@ -XXX,XX +XXX,XX @@ static void bamboo_init(MachineState *machine)
     CPUPPCState *env;
     uint64_t elf_entry;
     uint64_t elf_lowaddr;
-    hwaddr loadaddr = 0;
+    hwaddr loadaddr = LOAD_UIMAGE_LOADADDR_INVALID;
     target_long initrd_size = 0;
     DeviceState *dev;
     int success;
diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/ppc/sam460ex.c
+++ b/hw/ppc/sam460ex.c
@@ -XXX,XX +XXX,XX @@ static void sam460ex_init(MachineState *machine)
     CPUPPCState *env;
     PPC4xxI2CState *i2c[2];
     hwaddr entry = UBOOT_ENTRY;
-    hwaddr loadaddr = 0;
+    hwaddr loadaddr = LOAD_UIMAGE_LOADADDR_INVALID;
     target_long initrd_size = 0;
     DeviceState *dev;
     SysBusDevice *sbdev;
-- 
2.19.2

Hi; here's another arm pullreq; main parts here are the
new i.MX 8MM EVK board, and a lot of refactoring.

thanks
-- PMM

The following changes since commit aa15257174da180c6a8a9d58f87319cfe61c5520:

Merge tag 'pbouvier/pr/plugins-20260424' of https://gitlab.com/p-b-o/qemu into staging (2026-04-25 10:22:04 -0400)

are available in the Git repository at:

https://gitlab.com/pm215/qemu.git tags/pull-target-arm-20260427

for you to fetch changes up to 4575da5ecb7a27544aa6da1f78e700e8100ceaea:

target/arm: report register in WFIT syndromes (2026-04-27 11:46:34 +0100)

----------------------------------------------------------------
target-arm queue:
docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list
hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board
target/arm: Build M-profile helper code once only
hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register
hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header
target/arm: Allow 'aarch64=off' to be set for TCG CPUs
target/arm: Allow some sysregs to not have to be an exact match for migration
hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices
hw/arm/fsl-imx6ul: Implement LCDIF display device
target/arm: Refactor syndrome value code to use registerfields
target/arm: Report the register in WFxT syndromes

----------------------------------------------------------------
Alex Bennée (24):
      docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list
      target/arm: migrate basic syndrome helpers to registerfields
      target/arm: migrate system/cp trap syndromes to registerfields
      target/arm: migrate FP/SIMD trap syndromes to registerfields
      target/arm: migrate eret trap syndromes to registerfields
      target/arm: migrate SME trap syndromes to registerfields
      target/arm: migrate PAC trap syndromes to registerfields
      target/arm: migrate BTI trap syndromes to registerfields
      target/arm: migrate BXJ trap syndromes to registerfields
      target/arm: migrate Granule Protection traps to registerfields
      target/arm: migrate fault syndromes to registerfields
      target/arm: migrate debug syndromes to registerfields
      target/arm: migrate wfx syndromes to registerfields
      target/arm: migrate gcs syndromes to registerfields
      target/arm: migrate memory op syndromes to registerfields
      target/arm: migrate check_hcr_el2_trap to use syndrome helper
      target/arm: use syndrome helpers in arm_cpu_do_interrupt_aarch32_hyp
      target/arm: use syndrome helpers to set SAME_EL EC bit
      target/arm: make whpx use syndrome helpers for decode
      target/arm: make hvf use syndrome helpers for decode
      target/arm: use syndrome helpers in merge_syn_data_abort
      target/arm: use syndrome helpers to query VNCR bit
      target/arm: remove old syndrome defines
      target/arm: report register in WFIT syndromes

Eric Auger (7):
      target/arm/cpu: Introduce the infrastructure for cpreg migration tolerances
      target/arm/machine: Handle ToleranceNotOnBothEnds migration tolerances
      target/arm/machine: Handle ToleranceOnlySrcTestValue migration tolerance
      target/arm/cpu64: Mitigate migration failures due to spurious TCR_EL1, PIRE0_EL1 and PIR_EL1
      target/arm/cpu64: Define cpreg migration tolerance for KVM_REG_ARM_VENDOR_HYP_BMAP_2
      target/arm/helper: Define cpreg migration tolerance for DGBDTR_EL0
      Revert "target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat"

Gaurav Sharma (15):
      hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board
      hw/misc/imx8mp_analog: Add property to analog device
      hw/arm/fsl-imx8mm: Add Analog device IP to iMX8MM SOC
      hw/arm/fsl-imx8mm: Add Clock Control Module IP to iMX8MM
      hw/arm/fsl-imx8mm: Implemented support for SNVS
      hw/arm/fsl-imx8mm: Adding support for USDHC storage controllers
      hw/arm/fsl-imx8mm: Add PCIe support
      hw/arm/fsl-imx8mm: Add GPIO controllers
      hw/arm/fsl-imx8mm: Adding support for I2C emulation
      hw/arm/fsl-imx8mm: Adding support for SPI controller
      hw/arm/fsl-imx8mm: Adding support for Watchdog Timers
      hw/arm/fsl-imx8mm: Adding support for General Purpose Timers
      hw/arm/fsl-imx8mm: Adding support for ENET ethernet controller
      hw/arm/fsl-imx8mm: Adding support for USB controller
      hw/arm/fsl-imx8mm: Adding functional testing of iMX8MM emulation

Osama Abdelkader (1):
      hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices

Peter Maydell (4):
      hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header
      target/arm: Clear AArch64 ID regs from ARMISARegisters if AArch64 disabled
      target/arm: Allow 'aarch64=off' to be set for TCG CPUs
      tests/functional/aarch64: Add basic test of TCG aarch64=off

Philippe Mathieu-Daudé (9):
      target/arm: Ignore endianness when setting MTE tags
      target/arm: Explode MO_TExx -> MO_TE | MO_xx
      target/arm: Hoist MO_TE into mve_advance_vpt()
      target/arm: Hoist MO_TE into MVE DO_VSTR() macro
      target/arm: Introduce mo_endian() helper
      target/arm: Replace MO_TE -> mo_endian() for MVE helpers
      target/arm: Compile mve_helper.c once
      target/arm: Replace MO_TE -> mo_endian() for Cortex-M helpers
      target/arm: Compile m_helper.c once

Thomas Huth (1):
      hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register

Yucai Liu (2):
      hw/display: Add i.MX6UL LCDIF device model
      hw/arm/fsl-imx6ul: Wire in the LCDIF device model

MAINTAINERS                                       |  16 +-
 docs/system/arm/cpu-features.rst                  |  10 +-
 docs/system/arm/emulation.rst                     |   2 +
 docs/system/arm/{imx8mp-evk.rst => imx8m.rst}     |  49 +-
 docs/system/target-arm.rst                        |   2 +-
 hw/arm/Kconfig                                    |  25 +
 hw/arm/fsl-imx6ul.c                               |  12 +-
 hw/arm/fsl-imx8mm.c                               | 704 ++++++++++++++++++++++
 hw/arm/imx8mm-evk.c                               | 130 ++++
 hw/arm/integratorcp.c                             |   3 -
 hw/arm/meson.build                                |   2 +
 hw/arm/raspi4b.c                                  |  10 +-
 hw/arm/realview.c                                 |   2 +-
 hw/arm/vexpress.c                                 |   2 +-
 hw/arm/virt.c                                     |   1 -
 hw/display/Kconfig                                |   4 +
 hw/display/imx6ul_lcdif.c                         | 453 ++++++++++++++
 hw/display/meson.build                            |   1 +
 hw/misc/arm_sysctl.c                              |   2 +-
 hw/misc/imx8mp_analog.c                           |  12 +-
 hw/timer/imx_gpt.c                                |  26 +
 hw/vmapple/vmapple.c                              |   1 -
 include/hw/arm/fsl-imx6ul.h                       |   4 +-
 include/hw/arm/fsl-imx8mm.h                       | 242 ++++++++
 include/hw/arm/primecell.h                        |  12 -
 include/hw/display/imx6ul_lcdif.h                 |  37 ++
 include/hw/misc/arm_sysctl.h                      |  16 +
 include/hw/misc/imx8mp_analog.h                   |   3 +
 include/hw/timer/imx_gpt.h                        |   2 +
 target/arm/cpu-features.h                         |   5 +
 target/arm/cpu.c                                  | 153 ++++-
 target/arm/cpu.h                                  |   4 +-
 target/arm/cpu64.c                                |  39 ++
 target/arm/debug_helper.c                         |  29 -
 target/arm/helper.c                               |  27 +-
 target/arm/hvf/hvf.c                              |  14 +-
 target/arm/internals.h                            |  60 ++
 target/arm/machine.c                              |  33 +-
 target/arm/syndrome.h                             | 595 ++++++++++++++----
 target/arm/tcg/debug.c                            |   2 +-
 target/arm/tcg/helper-a64.c                       |   2 +-
 target/arm/tcg/helper-defs.h                      |   2 +-
 target/arm/tcg/m_helper.c                         |   8 +-
 target/arm/tcg/meson.build                        |   6 +-
 target/arm/tcg/mve_helper.c                       | 102 ++--
 target/arm/tcg/op_helper.c                        |   7 +-
 target/arm/tcg/tlb_helper.c                       |   6 +-
 target/arm/tcg/translate-a64.c                    |   2 +-
 target/arm/tcg/vfp_helper.c                       |   5 +-
 target/arm/trace-events                           |   2 +
 target/arm/whpx/whpx-all.c                        |  13 +-
 tests/functional/aarch64/meson.build              |   3 +
 tests/functional/aarch64/test_imx8mm_evk.py       |  69 +++
 tests/functional/aarch64/test_virt_aarch64_off.py |  37 ++
 tests/qtest/arm-cpu-features.c                    |   8 +-
 55 files changed, 2743 insertions(+), 275 deletions(-)
 rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%)
 create mode 100644 hw/arm/fsl-imx8mm.c
 create mode 100644 hw/arm/imx8mm-evk.c
 create mode 100644 hw/display/imx6ul_lcdif.c
 create mode 100644 include/hw/arm/fsl-imx8mm.h
 delete mode 100644 include/hw/arm/primecell.h
 create mode 100644 include/hw/display/imx6ul_lcdif.h
 create mode 100644 include/hw/misc/arm_sysctl.h
 create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py
 create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py

From: Alex Bennée <alex.bennee@linaro.org>

This is just a documentation tweak as we already support both.
FEAT_AA32 implies FEAT_AA32EL0. FEAT_AA64 implies FEAT_AA64EL[0123].

This is however useful if you are using emulation.rst as a source of
truth of what QEMU emulates and when cross checking with
Features.json from Arm.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260421093506.616307-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/emulation.rst | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/emulation.rst
+++ b/docs/system/arm/emulation.rst
@@ -XXX,XX +XXX,XX @@ QEMU's TCG emulation includes support for the Armv5, Armv6, Armv7,
 Armv8 and Armv9 versions of the A-profile architecture. It also has support for
 the following architecture extensions:
 
+- FEAT_AA32 (PE Support for AArch32)
 - FEAT_AA32BF16 (AArch32 BFloat16 instructions)
 - FEAT_AA32EL0 (Support for AArch32 at EL0)
 - FEAT_AA32EL1 (Support for AArch32 at EL1)
@@ -XXX,XX +XXX,XX @@ the following architecture extensions:
 - FEAT_AA32EL3 (Support for AArch32 at EL3)
 - FEAT_AA32HPD (AArch32 hierarchical permission disables)
 - FEAT_AA32I8MM (AArch32 Int8 matrix multiplication instructions)
+- FEAT_AA64 (PE uses AArch64 after last reboot)
 - FEAT_AA64EL0 (Support for AArch64 at EL0)
 - FEAT_AA64EL1 (Support for AArch64 at EL1)
 - FEAT_AA64EL2 (Support for AArch64 at EL2)
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Implemented CPUs, RAM, UARTs and Interrupt Controller
Other peripherals are represented as TYPE_UNIMPLEMENTED_DEVICE
Complete memory map of the SoC is provided.

Set default RAM size to 2GB and default CPU count to 4 to match
the real i.MX8MM EVK hardware configuration.

Documentation is shared with imx8mp-evk to avoid duplication.

Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
[PMM: fixed over-long lines in doc]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 MAINTAINERS                                   |  11 +-
 docs/system/arm/{imx8mp-evk.rst => imx8m.rst} |  49 ++-
 docs/system/target-arm.rst                    |   2 +-
 hw/arm/Kconfig                                |  12 +
 hw/arm/fsl-imx8mm.c                           | 377 ++++++++++++++++++
 hw/arm/imx8mm-evk.c                           | 112 ++++++
 hw/arm/meson.build                            |   2 +
 include/hw/arm/fsl-imx8mm.h                   | 158 ++++++++
 8 files changed, 709 insertions(+), 14 deletions(-)
 rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%)
 create mode 100644 hw/arm/fsl-imx8mm.c
 create mode 100644 hw/arm/imx8mm-evk.c
 create mode 100644 include/hw/arm/fsl-imx8mm.h

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/pci-host/designware.c
 F: include/hw/pci-host/designware.h
 F: docs/system/arm/mcimx7d-sabre.rst
 
+MCIMX8MM-EVK / iMX8MM
+M: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+L: qemu-arm@nongnu.org
+S: Maintained
+F: hw/arm/fsl-imx8mm.c
+F: hw/arm/imx8mm-evk.c
+F: include/hw/arm/fsl-imx8mm.h
+F: docs/system/arm/imx8m.rst
+
 MCIMX8MP-EVK / i.MX8MP
 M: Bernhard Beschow <shentey@gmail.com>
 L: qemu-arm@nongnu.org
@@ -XXX,XX +XXX,XX @@ F: hw/rtc/rs5c372.c
 F: include/hw/arm/fsl-imx8mp.h
 F: include/hw/misc/imx8mp_*.h
 F: include/hw/pci-host/fsl_imx8m_phy.h
-F: docs/system/arm/imx8mp-evk.rst
+F: docs/system/arm/imx8m.rst
 F: tests/functional/aarch64/test_imx8mp_evk.py
 F: tests/qtest/rs5c372-test.c
 
diff --git a/docs/system/arm/imx8mp-evk.rst b/docs/system/arm/imx8m.rst
similarity index 58%
rename from docs/system/arm/imx8mp-evk.rst
rename to docs/system/arm/imx8m.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/imx8mp-evk.rst
+++ b/docs/system/arm/imx8m.rst
@@ -XXX,XX +XXX,XX @@
-NXP i.MX 8M Plus Evaluation Kit (``imx8mp-evk``)
-================================================
+NXP i.MX 8M Plus and i.MX 8M Mini Evaluation Kits (``imx8mp-evk``, ``imx8mm-evk``)
+==================================================================================
 
-The ``imx8mp-evk`` machine models the i.MX 8M Plus Evaluation Kit, based on an
-i.MX 8M Plus SoC.
+The ``imx8mp-evk`` and ``imx8mm-evk`` machine models the i.MX 8M Plus
+and i.MX 8M Mini Evaluation Kits, based on i.MX 8M Plus and i.MX8M
+Mini SoCs.
 
 Supported devices
 -----------------
 
-The ``imx8mp-evk`` machine implements the following devices:
+The ``imx8mp-evk`` and ``imx8mm-evk`` machines implement the
+following devices:
 
  * Up to 4 Cortex-A53 cores
  * Generic Interrupt Controller (GICv3)
@@ -XXX,XX +XXX,XX @@ The ``imx8mp-evk`` machine implements the following devices:
 Boot options
 ------------
 
-The ``imx8mp-evk`` machine can start a Linux kernel directly using the standard
-``-kernel`` functionality.
+The ``imx8mp-evk`` and ``imx8mm-evk`` machines can start a Linux
+kernel directly using the standard ``-kernel`` functionality.
 
 Direct Linux Kernel Boot
 ''''''''''''''''''''''''
@@ -XXX,XX +XXX,XX @@ is to generate an image with Buildroot. Version 2024.11.1 is tested at the time
 of writing and involves two steps. First run the following commands in the
 toplevel directory of the Buildroot source tree:
 
+For i.MX 8M Plus EVK:
+
 .. code-block:: bash
 
   $ make freescale_imx8mpevk_defconfig
   $ make
 
+For i.MX 8M Mini EVK:
+
+.. code-block:: bash
+
+  $ make freescale_imx8mmevk_defconfig
+  $ make
+
 Once finished successfully there is an ``output/image`` subfolder. Navigate into
 it and resize the SD card image to a power of two:
 
@@ -XXX,XX +XXX,XX @@ it and resize the SD card image to a power of two:
 
 Now that everything is prepared the machine can be started as follows:
 
+For i.MX 8M Plus EVK:
+
 .. code-block:: bash
 
   $ qemu-system-aarch64 -M imx8mp-evk \
@@ -XXX,XX +XXX,XX @@ Now that everything is prepared the machine can be started as follows:
       -append "root=/dev/mmcblk2p2" \
       -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2
 
+For i.MX 8M Mini EVK:
+
+.. code-block:: bash
+
+  $ qemu-system-aarch64 -M imx8mm-evk -smp 4 -m 2G \
+      -display none -serial null -serial stdio \
+      -kernel Image \
+      -dtb imx8mm-evk.dtb \
+      -append "root=/dev/mmcblk2p2" \
+      -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2
 
 KVM Acceleration
 ----------------
@@ -XXX,XX +XXX,XX @@ To enable hardware-assisted acceleration via KVM, append
 ``-accel kvm`` to the command line. While this speeds up performance
 significantly, be aware of the following limitations:
 
-* The ``imx8mp-evk`` machine is not included under the "virtualization use case"
-  of :doc:`QEMU's security policy </system/security>`. This means that you
-  should not trust that it can contain malicious guests, whether it is run
-  using TCG or KVM. If you don't trust your guests and you're relying on QEMU to
-  be the security boundary, you want to choose another machine such as ``virt``.
+* The ``imx8mp-evk`` and ``imx8mm-evk`` machines are not included
+  under the "virtualization use case" of :doc:`QEMU's security
+  policy </system/security>`.  This means that you should not trust that
+  it can contain malicious guests, whether it is run using TCG or KVM.
+  If you don't trust your guests and you're relying on QEMU to be the
+  security boundary, you want to choose another machine such as
+  ``virt``.
 * Rather than Cortex-A53 CPUs, the same CPU type as the host's will be used.
   This is a limitation of KVM and may not work with guests with a tight
   dependency on Cortex-A53.
diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/target-arm.rst
+++ b/docs/system/target-arm.rst
@@ -XXX,XX +XXX,XX @@ Board-specific documentation
    arm/imx25-pdk
    arm/mcimx6ul-evk
    arm/mcimx7d-sabre
-   arm/imx8mp-evk
+   arm/imx8m
    arm/orangepi
    arm/raspi
    arm/collie
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
     depends on TCG
     select FSL_IMX8MP
 
+config FSL_IMX8MM
+    bool
+    select ARM_GIC
+    select IMX
+
+config FSL_IMX8MM_EVK
+    bool
+    default y
+    depends on AARCH64
+    depends on TCG
+    select FSL_IMX8MM
+
 config ARM_SMMUV3_ACCEL
     bool
     depends on ARM_SMMUV3
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * i.MX 8MM SoC Implementation
+ *
+ * Based on hw/arm/fsl-imx6.c
+ *
+ * Copyright (c) 2025, NXP Semiconductors
+ * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * iMX8MM Reference Manual - https://www.nxp.com/products/i.MX8MMINI -> Documentation
+ */
+
+#include "qemu/osdep.h"
+#include "system/address-spaces.h"
+#include "hw/arm/bsa.h"
+#include "hw/arm/fsl-imx8mm.h"
+#include "hw/misc/unimp.h"
+#include "hw/core/boards.h"
+#include "system/kvm.h"
+#include "system/system.h"
+#include "target/arm/cpu.h"
+#include "target/arm/cpu-qom.h"
+#include "target/arm/kvm_arm.h"
+#include "qapi/error.h"
+#include "qobject/qlist.h"
+
+static const struct {
+    hwaddr addr;
+    size_t size;
+    const char *name;
+} fsl_imx8mm_memmap[] = {
+    [FSL_IMX8MM_RAM] = { FSL_IMX8MM_RAM_START, FSL_IMX8MM_RAM_SIZE_MAX, "ram" },
+    [FSL_IMX8MM_DDR_PHY_BROADCAST] = { 0x3dc00000, 4 * MiB, "ddr_phy_broadcast" },
+    [FSL_IMX8MM_DDR_PERF_MON] = { 0x3d800000, 4 * MiB, "ddr_perf_mon" },
+    [FSL_IMX8MM_DDR_CTL] = { 0x3d400000, 4 * MiB, "ddr_ctl" },
+    [FSL_IMX8MM_DDR_PHY] = { 0x3c000000, 16 * MiB, "ddr_phy" },
+    [FSL_IMX8MM_GIC_DIST] = { 0x38800000, 512 * KiB, "gic_dist" },
+    [FSL_IMX8MM_GIC_REDIST] = { 0x38880000, 512 * KiB, "gic_redist" },
+    [FSL_IMX8MM_VPU] = { 0x38340000, 2 * MiB, "vpu" },
+    [FSL_IMX8MM_VPU_BLK_CTRL] = { 0x38330000, 2 * MiB, "vpu_blk_ctrl" },
+    [FSL_IMX8MM_VPU_G2_DECODER] = { 0x38310000, 1 * MiB, "vpu_g2_decoder" },
+    [FSL_IMX8MM_VPU_G1_DECODER] = { 0x38300000, 1 * MiB, "vpu_g1_decoder" },
+    [FSL_IMX8MM_USB2_OTG] = { 0x32e50200, 0x200, "usb2_otg" },
+    [FSL_IMX8MM_USB2] = { 0x32e50000, 0x200, "usb2" },
+    [FSL_IMX8MM_USB1_OTG] = { 0x32e40200, 0x200, "usb1_otg" },
+    [FSL_IMX8MM_USB1] = { 0x32e40000, 0x200, "usb1" },
+    [FSL_IMX8MM_GPU2D] = { 0x38000000, 64 * KiB, "gpu2d" },
+    [FSL_IMX8MM_QSPI1_RX_BUFFER] = { 0x34000000, 32 * MiB, "qspi1_rx_buffer" },
+    [FSL_IMX8MM_PCIE1] = { 0x33800000, 4 * MiB, "pcie1" },
+    [FSL_IMX8MM_QSPI1_TX_BUFFER] = { 0x33008000, 32 * KiB, "qspi1_tx_buffer" },
+    [FSL_IMX8MM_APBH_DMA] = { 0x33000000, 32 * KiB, "apbh_dma" },
+
+    /* AIPS-4 Begin */
+    [FSL_IMX8MM_TZASC] = { 0x32f80000, 64 * KiB, "tzasc" },
+    [FSL_IMX8MM_PCIE_PHY1] = { 0x32f00000, 64 * KiB, "pcie_phy1" },
+    [FSL_IMX8MM_MEDIA_BLK_CTL] = { 0x32e28000, 256, "media_blk_ctl" },
+    [FSL_IMX8MM_LCDIF] = { 0x32e00000, 64 * KiB, "lcdif" },
+    [FSL_IMX8MM_MIPI_DSI] = { 0x32e10000, 64 * KiB, "mipi_dsi" },
+    [FSL_IMX8MM_MIPI_CSI] = { 0x32e30000, 64 * KiB, "mipi_csi" },
+    [FSL_IMX8MM_AIPS4_CONFIGURATION] = { 0x32df0000, 64 * KiB, "aips4_configuration" },
+    /* AIPS-4 End */
+
+    [FSL_IMX8MM_INTERCONNECT] = { 0x32700000, 1 * MiB, "interconnect" },
+
+    /* AIPS-3 Begin */
+    [FSL_IMX8MM_ENET1] = { 0x30be0000, 64 * KiB, "enet1" },
+    [FSL_IMX8MM_SDMA1] = { 0x30bd0000, 64 * KiB, "sdma1" },
+    [FSL_IMX8MM_QSPI] = { 0x30bb0000, 64 * KiB, "qspi" },
+    [FSL_IMX8MM_USDHC3] = { 0x30b60000, 64 * KiB, "usdhc3" },
+    [FSL_IMX8MM_USDHC2] = { 0x30b50000, 64 * KiB, "usdhc2" },
+    [FSL_IMX8MM_USDHC1] = { 0x30b40000, 64 * KiB, "usdhc1" },
+    [FSL_IMX8MM_SEMAPHORE_HS] = { 0x30ac0000, 64 * KiB, "semaphore_hs" },
+    [FSL_IMX8MM_MU_B] = { 0x30ab0000, 64 * KiB, "mu_b" },
+    [FSL_IMX8MM_MU_A] = { 0x30aa0000, 64 * KiB, "mu_a" },
+    [FSL_IMX8MM_UART4] = { 0x30a60000, 64 * KiB, "uart4" },
+    [FSL_IMX8MM_I2C4] = { 0x30a50000, 64 * KiB, "i2c4" },
+    [FSL_IMX8MM_I2C3] = { 0x30a40000, 64 * KiB, "i2c3" },
+    [FSL_IMX8MM_I2C2] = { 0x30a30000, 64 * KiB, "i2c2" },
+    [FSL_IMX8MM_I2C1] = { 0x30a20000, 64 * KiB, "i2c1" },
+    [FSL_IMX8MM_AIPS3_CONFIGURATION] = { 0x309f0000, 64 * KiB, "aips3_configuration" },
+    [FSL_IMX8MM_CAAM] = { 0x30900000, 256 * KiB, "caam" },
+    [FSL_IMX8MM_SPBA1] = { 0x308f0000, 64 * KiB, "spba1" },
+    [FSL_IMX8MM_UART2] = { 0x30890000, 64 * KiB, "uart2" },
+    [FSL_IMX8MM_UART3] = { 0x30880000, 64 * KiB, "uart3" },
+    [FSL_IMX8MM_UART1] = { 0x30860000, 64 * KiB, "uart1" },
+    [FSL_IMX8MM_ECSPI3] = { 0x30840000, 64 * KiB, "ecspi3" },
+    [FSL_IMX8MM_ECSPI2] = { 0x30830000, 64 * KiB, "ecspi2" },
+    [FSL_IMX8MM_ECSPI1] = { 0x30820000, 64 * KiB, "ecspi1" },
+    /* AIPS-3 End */
+
+    /* AIPS-2 Begin */
+    [FSL_IMX8MM_QOSC] = { 0x307f0000, 64 * KiB, "qosc" },
+    [FSL_IMX8MM_PERFMON2] = { 0x307d0000, 64 * KiB, "perfmon2" },
+    [FSL_IMX8MM_PERFMON1] = { 0x307c0000, 64 * KiB, "perfmon1" },
+    [FSL_IMX8MM_GPT4] = { 0x30700000, 64 * KiB, "gpt4" },
+    [FSL_IMX8MM_GPT5] = { 0x306f0000, 64 * KiB, "gpt5" },
+    [FSL_IMX8MM_GPT6] = { 0x306e0000, 64 * KiB, "gpt6" },
+    [FSL_IMX8MM_SYSCNT_CTRL] = { 0x306c0000, 64 * KiB, "syscnt_ctrl" },
+    [FSL_IMX8MM_SYSCNT_CMP] = { 0x306b0000, 64 * KiB, "syscnt_cmp" },
+    [FSL_IMX8MM_SYSCNT_RD] = { 0x306a0000, 64 * KiB, "syscnt_rd" },
+    [FSL_IMX8MM_PWM4] = { 0x30690000, 64 * KiB, "pwm4" },
+    [FSL_IMX8MM_PWM3] = { 0x30680000, 64 * KiB, "pwm3" },
+    [FSL_IMX8MM_PWM2] = { 0x30670000, 64 * KiB, "pwm2" },
+    [FSL_IMX8MM_PWM1] = { 0x30660000, 64 * KiB, "pwm1" },
+    [FSL_IMX8MM_AIPS2_CONFIGURATION] = { 0x305f0000, 64 * KiB, "aips2_configuration" },
+    /* AIPS-2 End */
+
+    /* AIPS-1 Begin */
+    [FSL_IMX8MM_CSU] = { 0x303e0000, 64 * KiB, "csu" },
+    [FSL_IMX8MM_RDC] = { 0x303d0000, 64 * KiB, "rdc" },
+    [FSL_IMX8MM_SEMAPHORE2] = { 0x303c0000, 64 * KiB, "semaphore2" },
+    [FSL_IMX8MM_SEMAPHORE1] = { 0x303b0000, 64 * KiB, "semaphore1" },
+    [FSL_IMX8MM_GPC] = { 0x303a0000, 64 * KiB, "gpc" },
+    [FSL_IMX8MM_SRC] = { 0x30390000, 64 * KiB, "src" },
+    [FSL_IMX8MM_CCM] = { 0x30380000, 64 * KiB, "ccm" },
+    [FSL_IMX8MM_SNVS_HP] = { 0x30370000, 64 * KiB, "snvs_hp" },
+    [FSL_IMX8MM_ANA_PLL] = { 0x30360000, 64 * KiB, "ana_pll" },
+    [FSL_IMX8MM_OCOTP_CTRL] = { 0x30350000, 64 * KiB, "ocotp_ctrl" },
+    [FSL_IMX8MM_IOMUXC_GPR] = { 0x30340000, 64 * KiB, "iomuxc_gpr" },
+    [FSL_IMX8MM_IOMUXC] = { 0x30330000, 64 * KiB, "iomuxc" },
+    [FSL_IMX8MM_GPT3] = { 0x302f0000, 64 * KiB, "gpt3" },
+    [FSL_IMX8MM_GPT2] = { 0x302e0000, 64 * KiB, "gpt2" },
+    [FSL_IMX8MM_GPT1] = { 0x302d0000, 64 * KiB, "gpt1" },
+    [FSL_IMX8MM_SDMA2] = { 0x302c0000, 64 * KiB, "sdma2" },
+    [FSL_IMX8MM_SDMA3] = { 0x302b0000, 64 * KiB, "sdma3" },
+    [FSL_IMX8MM_WDOG3] = { 0x302a0000, 64 * KiB, "wdog3" },
+    [FSL_IMX8MM_WDOG2] = { 0x30290000, 64 * KiB, "wdog2" },
+    [FSL_IMX8MM_WDOG1] = { 0x30280000, 64 * KiB, "wdog1" },
+    [FSL_IMX8MM_ANA_OSC] = { 0x30270000, 64 * KiB, "ana_osc" },
+    [FSL_IMX8MM_ANA_TSENSOR] = { 0x30260000, 64 * KiB, "ana_tsensor" },
+    [FSL_IMX8MM_GPIO5] = { 0x30240000, 64 * KiB, "gpio5" },
+    [FSL_IMX8MM_GPIO4] = { 0x30230000, 64 * KiB, "gpio4" },
+    [FSL_IMX8MM_GPIO3] = { 0x30220000, 64 * KiB, "gpio3" },
+    [FSL_IMX8MM_GPIO2] = { 0x30210000, 64 * KiB, "gpio2" },
+    [FSL_IMX8MM_GPIO1] = { 0x30200000, 64 * KiB, "gpio1" },
+    [FSL_IMX8MM_AIPS1_CONFIGURATION] = { 0x301f0000, 64 * KiB, "aips1_configuration" },
+    [FSL_IMX8MM_SAI6] = { 0x30060000, 64 * KiB, "sai6" },
+    [FSL_IMX8MM_SAI5] = { 0x30050000, 64 * KiB, "sai5" },
+    [FSL_IMX8MM_SAI3] = { 0x30030000, 64 * KiB, "sai3" },
+    [FSL_IMX8MM_SAI2] = { 0x30020000, 64 * KiB, "sai2" },
+    [FSL_IMX8MM_SAI1] = { 0x30010000, 64 * KiB, "sai1" },
+
+    /* AIPS-1 End */
+
+    [FSL_IMX8MM_A53_DAP] = { 0x28000000, 16 * MiB, "a53_dap" },
+    [FSL_IMX8MM_PCIE1_MEM] = { 0x18000000, 128 * MiB, "pcie1_mem" },
+    [FSL_IMX8MM_QSPI_MEM] = { 0x08000000, 256 * MiB, "qspi_mem" },
+    [FSL_IMX8MM_OCRAM] = { 0x00900000, 256 * KiB, "ocram" },
+    [FSL_IMX8MM_TCM_DTCM] = { 0x00800000, 128 * KiB, "tcm_dtcm" },
+    [FSL_IMX8MM_TCM_ITCM] = { 0x007e0000, 128 * KiB, "tcm_itcm" },
+    [FSL_IMX8MM_OCRAM_S] = { 0x00180000, 32 * KiB, "ocram_s" },
+    [FSL_IMX8MM_CAAM_MEM] = { 0x00100000, 32 * KiB, "caam_mem" },
+    [FSL_IMX8MM_BOOT_ROM_PROTECTED] = { 0x0003f000, 4 * KiB, "boot_rom_protected" },
+    [FSL_IMX8MM_BOOT_ROM] = { 0x00000000, 252 * KiB, "boot_rom" },
+};
+
+static void fsl_imx8mm_init(Object *obj)
+{
+    MachineState *ms = MACHINE(qdev_get_machine());
+    FslImx8mmState *s = FSL_IMX8MM(obj);
+    const char *cpu_type = ms->cpu_type ?: ARM_CPU_TYPE_NAME("cortex-a53");
+    int i;
+
+    for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX8MM_NUM_CPUS); i++) {
+        g_autofree char *name = g_strdup_printf("cpu%d", i);
+        object_initialize_child(obj, name, &s->cpu[i], cpu_type);
+    }
+
+    object_initialize_child(obj, "gic", &s->gic, gicv3_class_name());
+
+    for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
+        g_autofree char *name = g_strdup_printf("uart%d", i + 1);
+        object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
+    }
+
+}
+
+static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
+{
+    MachineState *ms = MACHINE(qdev_get_machine());
+    FslImx8mmState *s = FSL_IMX8MM(dev);
+    DeviceState *gicdev = DEVICE(&s->gic);
+    int i;
+
+    if (ms->smp.cpus > FSL_IMX8MM_NUM_CPUS) {
+        error_setg(errp, "%s: Only %d CPUs are supported (%d requested)",
+                   TYPE_FSL_IMX8MM, FSL_IMX8MM_NUM_CPUS, ms->smp.cpus);
+        return;
+    }
+
+    /* CPUs */
+    for (i = 0; i < ms->smp.cpus; i++) {
+        /* On uniprocessor, the CBAR is set to 0 */
+        if (ms->smp.cpus > 1 &&
+                object_property_find(OBJECT(&s->cpu[i]), "reset-cbar")) {
+            object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar",
+                                    fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr,
+                                    &error_abort);
+        }
+
+        /*
+         * CNTFID0 base frequency in Hz of system counter
+         */
+        object_property_set_int(OBJECT(&s->cpu[i]), "cntfrq", 8000000,
+                                &error_abort);
+
+        if (object_property_find(OBJECT(&s->cpu[i]), "has_el2")) {
+            object_property_set_bool(OBJECT(&s->cpu[i]), "has_el2",
+                                     !kvm_enabled(), &error_abort);
+        }
+
+        if (object_property_find(OBJECT(&s->cpu[i]), "has_el3")) {
+            object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3",
+                                     !kvm_enabled(), &error_abort);
+        }
+
+        if (i) {
+            /*
+             * Secondary CPUs start in powered-down state (and can be
+             * powered up via the SRC system reset controller)
+             */
+            object_property_set_bool(OBJECT(&s->cpu[i]), "start-powered-off",
+                                     true, &error_abort);
+        }
+
+        if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) {
+            return;
+        }
+    }
+
+    /* GIC */
+    {
+        SysBusDevice *gicsbd = SYS_BUS_DEVICE(&s->gic);
+        QList *redist_region_count;
+        bool pmu = object_property_get_bool(OBJECT(first_cpu), "pmu", NULL);
+
+        qdev_prop_set_uint32(gicdev, "num-cpu", ms->smp.cpus);
+        qdev_prop_set_uint32(gicdev, "num-irq",
+                             FSL_IMX8MM_NUM_IRQS + GIC_INTERNAL);
+        redist_region_count = qlist_new();
+        qlist_append_int(redist_region_count, ms->smp.cpus);
+        qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count);
+        object_property_set_link(OBJECT(&s->gic), "sysmem",
+                                 OBJECT(get_system_memory()), &error_fatal);
+        if (!sysbus_realize(gicsbd, errp)) {
+            return;
+        }
+        sysbus_mmio_map(gicsbd, 0, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr);
+        sysbus_mmio_map(gicsbd, 1, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_REDIST].addr);
+
+        /*
+         * Wire the outputs from each CPU's generic timer and the GICv3
+         * maintenance interrupt signal to the appropriate GIC PPI inputs, and
+         * the GIC's IRQ/FIQ interrupt outputs to the CPU's inputs.
+         */
+        for (i = 0; i < ms->smp.cpus; i++) {
+            DeviceState *cpudev = DEVICE(&s->cpu[i]);
+            int intidbase = FSL_IMX8MM_NUM_IRQS + i * GIC_INTERNAL;
+            qemu_irq irq;
+
+            /*
+             * Mapping from the output timer irq lines from the CPU to the
+             * GIC PPI inputs.
+             */
+            static const int timer_irqs[] = {
+                [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ,
+                [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
+                [GTIMER_HYP]  = ARCH_TIMER_NS_EL2_IRQ,
+                [GTIMER_SEC]  = ARCH_TIMER_S_EL1_IRQ,
+            };
+
+            for (int j = 0; j < ARRAY_SIZE(timer_irqs); j++) {
+                irq = qdev_get_gpio_in(gicdev, intidbase + timer_irqs[j]);
+                qdev_connect_gpio_out(cpudev, j, irq);
+            }
+
+            irq = qdev_get_gpio_in(gicdev, intidbase + ARCH_GIC_MAINT_IRQ);
+            qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt",
+                                        0, irq);
+
+            irq = qdev_get_gpio_in(gicdev, intidbase + VIRTUAL_PMU_IRQ);
+            qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, irq);
+
+            sysbus_connect_irq(gicsbd, i,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+            sysbus_connect_irq(gicsbd, i + ms->smp.cpus,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
+            sysbus_connect_irq(gicsbd, i + 2 * ms->smp.cpus,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
+            sysbus_connect_irq(gicsbd, i + 3 * ms->smp.cpus,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
+
+            if (kvm_enabled()) {
+                if (pmu) {
+                    assert(arm_feature(&s->cpu[i].env, ARM_FEATURE_PMU));
+                    if (kvm_irqchip_in_kernel()) {
+                        kvm_arm_pmu_set_irq(&s->cpu[i], VIRTUAL_PMU_IRQ);
+                    }
+                    kvm_arm_pmu_init(&s->cpu[i]);
+                }
+            }
+        }
+    }
+
+    /* UARTs */
+    for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } serial_table[FSL_IMX8MM_NUM_UARTS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART1].addr, FSL_IMX8MM_UART1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART2].addr, FSL_IMX8MM_UART2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART3].addr, FSL_IMX8MM_UART3_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART4].addr, FSL_IMX8MM_UART4_IRQ },
+        };
+
+        qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i));
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0,
+                           qdev_get_gpio_in(gicdev, serial_table[i].irq));
+    }
+
+    /* On-Chip RAM */
+    if (!memory_region_init_ram(&s->ocram, OBJECT(dev), "imx8mm.ocram",
+                                fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].size,
+                                errp)) {
+        return;
+    }
+    memory_region_add_subregion(get_system_memory(),
+                                fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
+                                &s->ocram);
+
+    /* Unimplemented devices */
+    for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
+        switch (i) {
+        case FSL_IMX8MM_GIC_DIST:
+        case FSL_IMX8MM_GIC_REDIST:
+        case FSL_IMX8MM_RAM:
+        case FSL_IMX8MM_OCRAM:
+        case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
+            /* device implemented and treated above */
+            break;
+
+        default:
+            create_unimplemented_device(fsl_imx8mm_memmap[i].name,
+                                        fsl_imx8mm_memmap[i].addr,
+                                        fsl_imx8mm_memmap[i].size);
+            break;
+        }
+    }
+}
+
+static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(oc);
+
+    dc->realize = fsl_imx8mm_realize;
+
+    dc->desc = "i.MX 8MM SoC";
+}
+
+static const TypeInfo fsl_imx8mm_types[] = {
+    {
+        .name = TYPE_FSL_IMX8MM,
+        .parent = TYPE_SYS_BUS_DEVICE,
+        .instance_size = sizeof(FslImx8mmState),
+        .instance_init = fsl_imx8mm_init,
+        .class_init = fsl_imx8mm_class_init,
+    },
+};
+
+DEFINE_TYPES(fsl_imx8mm_types)
diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/arm/imx8mm-evk.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * NXP i.MX 8MM Evaluation Kit System Emulation
+ *
+ * Copyright (c) 2025, NXP Semiconductors
+ * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "system/address-spaces.h"
+#include "hw/arm/boot.h"
+#include "hw/arm/fsl-imx8mm.h"
+#include "hw/arm/machines-qom.h"
+#include "hw/core/boards.h"
+#include "hw/core/qdev-properties.h"
+#include "system/kvm.h"
+#include "system/qtest.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+#include <libfdt.h>
+
+static void imx8mm_evk_modify_dtb(const struct arm_boot_info *info, void *fdt)
+{
+    int i, offset;
+
+    /* Temporarily disable following nodes until they are implemented */
+    const char *nodes_to_remove[] = {
+        "nxp,imx8mm-fspi",
+        "fsl,imx8mm-mipi-csi",
+        "fsl,imx8mm-mipi-dsim"
+    };
+
+    for (i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) {
+        const char *dev_str = nodes_to_remove[i];
+
+        offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
+        while (offset >= 0) {
+            fdt_nop_node(fdt, offset);
+            offset = fdt_node_offset_by_compatible(fdt, offset, dev_str);
+        }
+    }
+
+    /* Remove cpu-idle-states property from CPU nodes */
+    offset = fdt_node_offset_by_compatible(fdt, -1, "arm,cortex-a53");
+    while (offset >= 0) {
+        fdt_nop_property(fdt, offset, "cpu-idle-states");
+        offset = fdt_node_offset_by_compatible(fdt, offset, "arm,cortex-a53");
+    }
+
+    if (kvm_enabled()) {
+        /* Use system counter frequency from host CPU to fix time in guest */
+        offset = fdt_node_offset_by_compatible(fdt, -1, "arm,armv8-timer");
+        while (offset >= 0) {
+            fdt_nop_property(fdt, offset, "clock-frequency");
+            offset = fdt_node_offset_by_compatible(fdt, offset, "arm,armv8-timer");
+        }
+    }
+}
+
+static void imx8mm_evk_init(MachineState *machine)
+{
+    static struct arm_boot_info boot_info;
+    FslImx8mmState *s;
+
+    if (machine->ram_size > FSL_IMX8MM_RAM_SIZE_MAX) {
+        error_report("RAM size " RAM_ADDR_FMT " above max supported (%08" PRIx64 ")",
+                     machine->ram_size, FSL_IMX8MM_RAM_SIZE_MAX);
+        exit(1);
+    }
+
+    boot_info = (struct arm_boot_info) {
+        .loader_start = FSL_IMX8MM_RAM_START,
+        .board_id = -1,
+        .ram_size = machine->ram_size,
+        .psci_conduit = QEMU_PSCI_CONDUIT_SMC,
+        .modify_dtb = imx8mm_evk_modify_dtb,
+    };
+
+    s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine),
+                                         "soc", &error_fatal, NULL));
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal);
+
+    memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START,
+                                machine->ram);
+
+    if (!qtest_enabled()) {
+        arm_load_kernel(&s->cpu[0], machine, &boot_info);
+    }
+}
+
+static const char *imx8mm_evk_get_default_cpu_type(const MachineState *ms)
+{
+    if (kvm_enabled()) {
+        return ARM_CPU_TYPE_NAME("host");
+    }
+
+    return ARM_CPU_TYPE_NAME("cortex-a53");
+}
+
+static void imx8mm_evk_machine_init(MachineClass *mc)
+{
+    mc->desc = "NXP i.MX 8MM EVK Board";
+    mc->init = imx8mm_evk_init;
+    mc->max_cpus = FSL_IMX8MM_NUM_CPUS;
+    mc->default_cpus = FSL_IMX8MM_NUM_CPUS;
+    mc->default_ram_size = 2 * GiB;
+    mc->default_ram_id = "imx8mm-evk.ram";
+    mc->get_default_cpu_type = imx8mm_evk_get_default_cpu_type;
+}
+
+DEFINE_MACHINE_AARCH64("imx8mm-evk", imx8mm_evk_machine_init)
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -XXX,XX +XXX,XX @@ arm_common_ss.add(when: 'CONFIG_ARMSSE', if_true: files('armsse.c'))
 arm_common_ss.add(when: 'CONFIG_FSL_IMX7', if_true: files('fsl-imx7.c', 'mcimx7d-sabre.c'))
 arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP', if_true: files('fsl-imx8mp.c'))
 arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP_EVK', if_true: files('imx8mp-evk.c'))
+arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM', if_true: files('fsl-imx8mm.c'))
+arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM_EVK', if_true: files('imx8mm-evk.c'))
 arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmuv3.c'))
 arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3_ACCEL', if_true: files('smmuv3-accel.c'))
 stub_ss.add(files('smmuv3-accel-stubs.c'))
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * i.MX 8MM SoC Definitions
+ *
+ * Copyright (c) 2025, NXP Semiconductors
+ * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef FSL_IMX8MM_H
+#define FSL_IMX8MM_H
+
+#include "cpu.h"
+#include "hw/char/imx_serial.h"
+#include "hw/intc/arm_gicv3_common.h"
+#include "qom/object.h"
+#include "qemu/units.h"
+
+#define TYPE_FSL_IMX8MM "fsl-imx8mm"
+OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
+
+#define FSL_IMX8MM_RAM_START        0x40000000
+#define FSL_IMX8MM_RAM_SIZE_MAX     (4 * GiB)
+
+enum FslImx8mmConfiguration {
+    FSL_IMX8MM_NUM_CPUS         = 4,
+    FSL_IMX8MM_NUM_IRQS         = 128,
+    FSL_IMX8MM_NUM_UARTS        = 4,
+};
+
+struct FslImx8mmState {
+    SysBusDevice   parent_obj;
+
+    ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
+    GICv3State         gic;
+    IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
+    MemoryRegion ocram;
+};
+
+enum FslImx8mmMemoryRegions {
+    FSL_IMX8MM_A53_DAP,
+    FSL_IMX8MM_AIPS1_CONFIGURATION,
+    FSL_IMX8MM_AIPS2_CONFIGURATION,
+    FSL_IMX8MM_AIPS3_CONFIGURATION,
+    FSL_IMX8MM_AIPS4_CONFIGURATION,
+    FSL_IMX8MM_ANA_OSC,
+    FSL_IMX8MM_ANA_PLL,
+    FSL_IMX8MM_ANA_TSENSOR,
+    FSL_IMX8MM_APBH_DMA,
+    FSL_IMX8MM_BOOT_ROM,
+    FSL_IMX8MM_BOOT_ROM_PROTECTED,
+    FSL_IMX8MM_CAAM,
+    FSL_IMX8MM_CAAM_MEM,
+    FSL_IMX8MM_CCM,
+    FSL_IMX8MM_CSU,
+    FSL_IMX8MM_DDR_CTL,
+    FSL_IMX8MM_DDR_PERF_MON,
+    FSL_IMX8MM_DDR_PHY,
+    FSL_IMX8MM_DDR_PHY_BROADCAST,
+    FSL_IMX8MM_ECSPI1,
+    FSL_IMX8MM_ECSPI2,
+    FSL_IMX8MM_ECSPI3,
+    FSL_IMX8MM_ENET1,
+    FSL_IMX8MM_GIC_DIST,
+    FSL_IMX8MM_GIC_REDIST,
+    FSL_IMX8MM_GPC,
+    FSL_IMX8MM_GPIO1,
+    FSL_IMX8MM_GPIO2,
+    FSL_IMX8MM_GPIO3,
+    FSL_IMX8MM_GPIO4,
+    FSL_IMX8MM_GPIO5,
+    FSL_IMX8MM_GPT1,
+    FSL_IMX8MM_GPT2,
+    FSL_IMX8MM_GPT3,
+    FSL_IMX8MM_GPT4,
+    FSL_IMX8MM_GPT5,
+    FSL_IMX8MM_GPT6,
+    FSL_IMX8MM_GPU2D,
+    FSL_IMX8MM_I2C1,
+    FSL_IMX8MM_I2C2,
+    FSL_IMX8MM_I2C3,
+    FSL_IMX8MM_I2C4,
+    FSL_IMX8MM_INTERCONNECT,
+    FSL_IMX8MM_IOMUXC,
+    FSL_IMX8MM_IOMUXC_GPR,
+    FSL_IMX8MM_MEDIA_BLK_CTL,
+    FSL_IMX8MM_LCDIF,
+    FSL_IMX8MM_MIPI_CSI,
+    FSL_IMX8MM_MIPI_DSI,
+    FSL_IMX8MM_MU_A,
+    FSL_IMX8MM_MU_B,
+    FSL_IMX8MM_OCOTP_CTRL,
+    FSL_IMX8MM_OCRAM,
+    FSL_IMX8MM_OCRAM_S,
+    FSL_IMX8MM_PCIE1,
+    FSL_IMX8MM_PCIE1_MEM,
+    FSL_IMX8MM_PCIE_PHY1,
+    FSL_IMX8MM_PERFMON1,
+    FSL_IMX8MM_PERFMON2,
+    FSL_IMX8MM_PWM1,
+    FSL_IMX8MM_PWM2,
+    FSL_IMX8MM_PWM3,
+    FSL_IMX8MM_PWM4,
+    FSL_IMX8MM_QOSC,
+    FSL_IMX8MM_QSPI,
+    FSL_IMX8MM_QSPI1_RX_BUFFER,
+    FSL_IMX8MM_QSPI1_TX_BUFFER,
+    FSL_IMX8MM_QSPI_MEM,
+    FSL_IMX8MM_RAM,
+    FSL_IMX8MM_RDC,
+    FSL_IMX8MM_SAI1,
+    FSL_IMX8MM_SAI2,
+    FSL_IMX8MM_SAI3,
+    FSL_IMX8MM_SAI5,
+    FSL_IMX8MM_SAI6,
+    FSL_IMX8MM_SDMA1,
+    FSL_IMX8MM_SDMA2,
+    FSL_IMX8MM_SDMA3,
+    FSL_IMX8MM_SEMAPHORE1,
+    FSL_IMX8MM_SEMAPHORE2,
+    FSL_IMX8MM_SEMAPHORE_HS,
+    FSL_IMX8MM_SNVS_HP,
+    FSL_IMX8MM_SPBA1,
+    FSL_IMX8MM_SRC,
+    FSL_IMX8MM_SYSCNT_CMP,
+    FSL_IMX8MM_SYSCNT_CTRL,
+    FSL_IMX8MM_SYSCNT_RD,
+    FSL_IMX8MM_TCM_DTCM,
+    FSL_IMX8MM_TCM_ITCM,
+    FSL_IMX8MM_TZASC,
+    FSL_IMX8MM_UART1,
+    FSL_IMX8MM_UART2,
+    FSL_IMX8MM_UART3,
+    FSL_IMX8MM_UART4,
+    FSL_IMX8MM_USB1,
+    FSL_IMX8MM_USB2,
+    FSL_IMX8MM_USB1_OTG,
+    FSL_IMX8MM_USB2_OTG,
+    FSL_IMX8MM_USDHC1,
+    FSL_IMX8MM_USDHC2,
+    FSL_IMX8MM_USDHC3,
+    FSL_IMX8MM_VPU,
+    FSL_IMX8MM_VPU_BLK_CTRL,
+    FSL_IMX8MM_VPU_G1_DECODER,
+    FSL_IMX8MM_VPU_G2_DECODER,
+    FSL_IMX8MM_WDOG1,
+    FSL_IMX8MM_WDOG2,
+    FSL_IMX8MM_WDOG3,
+};
+
+enum FslImx8mmIrqs {
+    FSL_IMX8MM_UART1_IRQ    = 26,
+    FSL_IMX8MM_UART2_IRQ    = 27,
+    FSL_IMX8MM_UART3_IRQ    = 28,
+    FSL_IMX8MM_UART4_IRQ    = 29,
+};
+
+#endif /* FSL_IMX8MM_H */
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Add configurable properties for register reset values that differ
between i.MX 8M variants (Plus, Mini, etc.). This allows the same
device implementation to be shared across multiple SoCs.

Properties added:
- arm-pll-fdiv-ctl0-reset: ARM PLL divider control reset value

Default value is set to match i.MX 8MP reset value (0x000FA031).
This can be overridden in the variant like iMX8MM with its own
reset value.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/misc/imx8mp_analog.c         | 12 +++++++++++-
 include/hw/misc/imx8mp_analog.h |  3 +++
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/hw/misc/imx8mp_analog.c b/hw/misc/imx8mp_analog.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/imx8mp_analog.c
+++ b/hw/misc/imx8mp_analog.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/log.h"
 
 #include "hw/misc/imx8mp_analog.h"
+#include "hw/core/qdev-properties.h"
 #include "migration/vmstate.h"
 
 #define ANALOG_PLL_LOCK BIT(31)
@@ -XXX,XX +XXX,XX @@ static void imx8mp_analog_reset(DeviceState *dev)
     s->analog[ANALOG_VPU_PLL_LOCKD_CTRL] = 0x0010003f;
     s->analog[ANALOG_VPU_PLL_MNIT_CTRL] = 0x00280081;
     s->analog[ANALOG_ARM_PLL_GEN_CTRL] = 0x00000810;
-    s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = 0x000fa031;
+
+    /* Use property value instead of hardcoded */
+    s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = s->arm_pll_fdiv_ctl0_reset;
+
     s->analog[ANALOG_ARM_PLL_LOCKD_CTRL] = 0x0010003f;
     s->analog[ANALOG_ARM_PLL_MNIT_CTRL] = 0x00280081;
     s->analog[ANALOG_SYS_PLL1_GEN_CTRL] = 0x0aaaa810;
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription imx8mp_analog_vmstate = {
     },
 };
 
+static const Property imx8mp_analog_properties[] = {
+    DEFINE_PROP_UINT32("arm-pll-fdiv-ctl0-reset", IMX8MPAnalogState,
+                       arm_pll_fdiv_ctl0_reset, 0x000fa031), /* imx8mp default */
+};
+
 static void imx8mp_analog_class_init(ObjectClass *klass, const void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
     device_class_set_legacy_reset(dc, imx8mp_analog_reset);
+    device_class_set_props(dc, imx8mp_analog_properties);
     dc->vmsd  = &imx8mp_analog_vmstate;
     dc->desc  = "i.MX 8M Plus Analog Module";
 }
diff --git a/include/hw/misc/imx8mp_analog.h b/include/hw/misc/imx8mp_analog.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/misc/imx8mp_analog.h
+++ b/include/hw/misc/imx8mp_analog.h
@@ -XXX,XX +XXX,XX @@ struct IMX8MPAnalogState {
     } mmio;
 
     uint32_t analog[ANALOG_MAX];
+
+    /* Property for variant-specific reset values */
+    uint32_t arm_pll_fdiv_ctl0_reset;
 };
 
 #endif /* IMX8MP_ANALOG_H */
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Add the Analog IP to i.MX8MM SoC. iMX8MM and i.MX8MP uses
the same Analog IP so the analog ip source will be shared.

The ARM PLL divider control register (arm-pll-fdiv-ctl0) has
a different reset value on i.MX8MM (0x000fa030) compared to
i.MX8MP (0x000fa031). So iMX8MM will be overriding this property
with its own reset-value.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 12 ++++++++++++
 include/hw/arm/fsl-imx8mm.h |  2 ++
 3 files changed, 15 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
 config FSL_IMX8MM
     bool
     select ARM_GIC
+    select FSL_IMX8MP_ANALOG
     select IMX
 
 config FSL_IMX8MM_EVK
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
 
     object_initialize_child(obj, "gic", &s->gic, gicv3_class_name());
 
+    object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG);
+
     for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
         g_autofree char *name = g_strdup_printf("uart%d", i + 1);
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         }
     }
 
+    /* Analog */
+    object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset",
+                            0x000fa030, &error_abort);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->analog), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->analog), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_ANA_PLL].addr);
+
     /* UARTs */
     for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     /* Unimplemented devices */
     for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
         switch (i) {
+        case FSL_IMX8MM_ANA_PLL:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "cpu.h"
 #include "hw/char/imx_serial.h"
 #include "hw/intc/arm_gicv3_common.h"
+#include "hw/misc/imx8mp_analog.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMX8MPAnalogState  analog;
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
 };
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Add the Clock Control Module (CCM) device to i.MX8MM SoC.
The CCM implementation is shared with i.MX8MP as the register
layout is identical between the two variants.Hence iMX8MM will
be using the source of iMX8MP CCM.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 10 ++++++++++
 include/hw/arm/fsl-imx8mm.h |  2 ++
 3 files changed, 13 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     bool
     select ARM_GIC
     select FSL_IMX8MP_ANALOG
+    select FSL_IMX8MP_CCM
     select IMX
 
 config FSL_IMX8MM_EVK
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
 
     object_initialize_child(obj, "gic", &s->gic, gicv3_class_name());
 
+    object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX8MP_CCM);
+
     object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG);
 
     for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         }
     }
 
+    /* CCM */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->ccm), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_CCM].addr);
+
     /* Analog */
     object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset",
                             0x000fa030, &error_abort);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
         switch (i) {
         case FSL_IMX8MM_ANA_PLL:
+        case FSL_IMX8MM_CCM:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/char/imx_serial.h"
 #include "hw/intc/arm_gicv3_common.h"
 #include "hw/misc/imx8mp_analog.h"
+#include "hw/misc/imx8mp_ccm.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

SNVS contains an RTC which allows Linux to deal correctly with time

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of SD/MMC cards through a virtual SDHCI interface
The emulated SDHCI controller allows guest OS to use emulated storage as
a standard block device.
This will allow running the images such as those generated
by Buildroot.

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 25 +++++++++++++++++++++++++
 hw/arm/imx8mm-evk.c         | 17 +++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  7 +++++++
 4 files changed, 50 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
+    select SDHCI
 
 config FSL_IMX8MM_EVK
     bool
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
+        g_autofree char *name = g_strdup_printf("usdhc%d", i + 1);
+        object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
+    }
 }
 
 static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* USDHCs */
+    for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } usdhc_table[FSL_IMX8MM_NUM_USDHCS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC1].addr, FSL_IMX8MM_USDHC1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC2].addr, FSL_IMX8MM_USDHC2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC3].addr, FSL_IMX8MM_USDHC3_IRQ },
+        };
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->usdhc[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, usdhc_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0,
+                           qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
+    }
+
     /* SNVS */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_OCRAM:
         case FSL_IMX8MM_SNVS_HP:
         case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
+        case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3:
             /* device implemented and treated above */
             break;
 
diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/imx8mm-evk.c
+++ b/hw/arm/imx8mm-evk.c
@@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine)
     memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START,
                                 machine->ram);
 
+    for (int i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
+        BusState *bus;
+        DeviceState *carddev;
+        BlockBackend *blk;
+        DriveInfo *di = drive_get(IF_SD, i, 0);
+
+        if (!di) {
+            continue;
+        }
+
+        blk = blk_by_legacy_dinfo(di);
+        bus = qdev_get_child_bus(DEVICE(&s->usdhc[i]), "sd-bus");
+        carddev = qdev_new(TYPE_SD_CARD);
+        qdev_prop_set_drive_err(carddev, "drive", blk, &error_fatal);
+        qdev_realize_and_unref(carddev, bus, &error_fatal);
+    }
+
     if (!qtest_enabled()) {
         arm_load_kernel(&s->cpu[0], machine, &boot_info);
     }
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
+#include "hw/sd/sdhci.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
+    FSL_IMX8MM_NUM_USDHCS       = 3,
 };
 
 struct FslImx8mmState {
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX7SNVSState      snvs;
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
+    SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmMemoryRegions {
 };
 
 enum FslImx8mmIrqs {
+    FSL_IMX8MM_USDHC1_IRQ   = 22,
+    FSL_IMX8MM_USDHC2_IRQ   = 23,
+    FSL_IMX8MM_USDHC3_IRQ   = 24,
+
     FSL_IMX8MM_UART1_IRQ    = 26,
     FSL_IMX8MM_UART2_IRQ    = 27,
     FSL_IMX8MM_UART3_IRQ    = 28,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

This enables support for Designware PCI Express Controller emulation
It provides a controlled environment to debug the linux pci subsystem

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  3 +++
 hw/arm/fsl-imx8mm.c         | 30 ++++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h | 10 ++++++++++
 3 files changed, 43 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
 
 config FSL_IMX8MM
     bool
+    imply PCI_DEVICES
     select ARM_GIC
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
     select SDHCI
+    select PCI_EXPRESS_DESIGNWARE
+    select PCI_EXPRESS_FSL_IMX8M_PHY
 
 config FSL_IMX8MM_EVK
     bool
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         g_autofree char *name = g_strdup_printf("usdhc%d", i + 1);
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
     }
+
+    object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
+    object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
+                            TYPE_FSL_IMX8M_PCIE_PHY);
 }
 
 static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0,
                     fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr);
 
+    /* PCIe */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_PCIE1].addr);
+
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 0,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTA_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 1,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTB_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 2,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTC_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTD_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 4,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_MSI_IRQ));
+
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_phy), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie_phy), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_PCIE_PHY1].addr);
+
     /* Unimplemented devices */
     for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
         switch (i) {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_CCM:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
+        case FSL_IMX8MM_PCIE1:
+        case FSL_IMX8MM_PCIE_PHY1:
         case FSL_IMX8MM_RAM:
         case FSL_IMX8MM_OCRAM:
         case FSL_IMX8MM_SNVS_HP:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
+#include "hw/pci-host/designware.h"
+#include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
 #include "qom/object.h"
 #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
+    DesignwarePCIEHost pcie;
+    FslImx8mPciePhyState   pcie_phy;
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART2_IRQ    = 27,
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
+
+    FSL_IMX8MM_PCI_INTA_IRQ = 122,
+    FSL_IMX8MM_PCI_INTB_IRQ = 123,
+    FSL_IMX8MM_PCI_INTC_IRQ = 124,
+    FSL_IMX8MM_PCI_INTD_IRQ = 125,
+    FSL_IMX8MM_PCI_MSI_IRQ  = 127,
 };
 
 #endif /* FSL_IMX8MM_H */
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Enabled GPIO controller emulation
Also updated the GPIO IRQ lines of iMX8MM

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/fsl-imx8mm.c         | 54 +++++++++++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h | 14 ++++++++++
 2 files changed, 68 insertions(+)

diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
+        g_autofree char *name = g_strdup_printf("gpio%d", i + 1);
+        object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO);
+    }
+
     for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
         g_autofree char *name = g_strdup_printf("usdhc%d", i + 1);
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* GPIOs */
+    for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq_low;
+            unsigned int irq_high;
+        } gpio_table[FSL_IMX8MM_NUM_GPIOS] = {
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO1].addr,
+                FSL_IMX8MM_GPIO1_LOW_IRQ,
+                FSL_IMX8MM_GPIO1_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO2].addr,
+                FSL_IMX8MM_GPIO2_LOW_IRQ,
+                FSL_IMX8MM_GPIO2_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO3].addr,
+                FSL_IMX8MM_GPIO3_LOW_IRQ,
+                FSL_IMX8MM_GPIO3_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO4].addr,
+                FSL_IMX8MM_GPIO4_LOW_IRQ,
+                FSL_IMX8MM_GPIO4_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO5].addr,
+                FSL_IMX8MM_GPIO5_LOW_IRQ,
+                FSL_IMX8MM_GPIO5_HIGH_IRQ
+            },
+        };
+        object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true,
+                                 &error_abort);
+        object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq",
+                                 true, &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0,
+                           qdev_get_gpio_in(gicdev, gpio_table[i].irq_low));
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1,
+                           qdev_get_gpio_in(gicdev, gpio_table[i].irq_high));
+    }
+
     /* USDHCs */
     for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_CCM:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
+        case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 
 #include "cpu.h"
 #include "hw/char/imx_serial.h"
+#include "hw/gpio/imx_gpio.h"
 #include "hw/intc/arm_gicv3_common.h"
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
@@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
 
 enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
+    FSL_IMX8MM_NUM_GPIOS        = 5,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
     FSL_IMX8MM_NUM_USDHCS       = 3,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMXGPIOState       gpio[FSL_IMX8MM_NUM_GPIOS];
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMX7SNVSState      snvs;
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
 
+    FSL_IMX8MM_GPIO1_LOW_IRQ  = 64,
+    FSL_IMX8MM_GPIO1_HIGH_IRQ = 65,
+    FSL_IMX8MM_GPIO2_LOW_IRQ  = 66,
+    FSL_IMX8MM_GPIO2_HIGH_IRQ = 67,
+    FSL_IMX8MM_GPIO3_LOW_IRQ  = 68,
+    FSL_IMX8MM_GPIO3_HIGH_IRQ = 69,
+    FSL_IMX8MM_GPIO4_LOW_IRQ  = 70,
+    FSL_IMX8MM_GPIO4_HIGH_IRQ = 71,
+    FSL_IMX8MM_GPIO5_LOW_IRQ  = 72,
+    FSL_IMX8MM_GPIO5_HIGH_IRQ = 73,
+
     FSL_IMX8MM_PCI_INTA_IRQ = 122,
     FSL_IMX8MM_PCI_INTB_IRQ = 123,
     FSL_IMX8MM_PCI_INTC_IRQ = 124,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

This can be used to test and debug I2C device drivers.
Added I2C interrupts

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  2 ++
 hw/arm/fsl-imx8mm.c         | 27 +++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  8 ++++++++
 3 files changed, 37 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
 config FSL_IMX8MM
     bool
     imply PCI_DEVICES
+    imply I2C_DEVICES
     select ARM_GIC
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
+    select IMX_I2C
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
+        g_autofree char *name = g_strdup_printf("i2c%d", i + 1);
+        object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C);
+    }
+
     for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
         g_autofree char *name = g_strdup_printf("gpio%d", i + 1);
         object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* I2Cs */
+    for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } i2c_table[FSL_IMX8MM_NUM_I2CS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C1].addr, FSL_IMX8MM_I2C1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C2].addr, FSL_IMX8MM_I2C2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C3].addr, FSL_IMX8MM_I2C3_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C4].addr, FSL_IMX8MM_I2C4_IRQ },
+        };
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0,
+                           qdev_get_gpio_in(gicdev, i2c_table[i].irq));
+    }
+
     /* GPIOs */
     for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
+        case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "cpu.h"
 #include "hw/char/imx_serial.h"
 #include "hw/gpio/imx_gpio.h"
+#include "hw/i2c/imx_i2c.h"
 #include "hw/intc/arm_gicv3_common.h"
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
@@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
 enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
     FSL_IMX8MM_NUM_GPIOS        = 5,
+    FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
     FSL_IMX8MM_NUM_USDHCS       = 3,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMX7SNVSState      snvs;
+    IMXI2CState        i2c[FSL_IMX8MM_NUM_I2CS];
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
 
+    FSL_IMX8MM_I2C1_IRQ     = 35,
+    FSL_IMX8MM_I2C2_IRQ     = 36,
+    FSL_IMX8MM_I2C3_IRQ     = 37,
+    FSL_IMX8MM_I2C4_IRQ     = 38,
+
     FSL_IMX8MM_GPIO1_LOW_IRQ  = 64,
     FSL_IMX8MM_GPIO1_HIGH_IRQ = 65,
     FSL_IMX8MM_GPIO2_LOW_IRQ  = 66,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of ECSPI in iMX8MM
Added SPI IRQ lines

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/fsl-imx8mm.c         | 26 ++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  7 +++++++
 2 files changed, 33 insertions(+)

diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
+        g_autofree char *name = g_strdup_printf("spi%d", i + 1);
+        object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
+    }
+
     object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
     object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
                             TYPE_FSL_IMX8M_PCIE_PHY);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
     }
 
+    /* ECSPIs */
+    for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } spi_table[FSL_IMX8MM_NUM_ECSPIS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI1].addr, FSL_IMX8MM_ECSPI1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI2].addr, FSL_IMX8MM_ECSPI2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI3].addr, FSL_IMX8MM_ECSPI3_IRQ },
+        };
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
+                           qdev_get_gpio_in(gicdev, spi_table[i].irq));
+    }
+
     /* SNVS */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
+        case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3:
         case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/pci-host/designware.h"
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
+#include "hw/ssi/imx_spi.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
 
 enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
+    FSL_IMX8MM_NUM_ECSPIS       = 3,
     FSL_IMX8MM_NUM_GPIOS        = 5,
     FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMX7SNVSState      snvs;
+    IMXSPIState        spi[FSL_IMX8MM_NUM_ECSPIS];
     IMXI2CState        i2c[FSL_IMX8MM_NUM_I2CS];
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
 
+    FSL_IMX8MM_ECSPI1_IRQ   = 31,
+    FSL_IMX8MM_ECSPI2_IRQ   = 32,
+    FSL_IMX8MM_ECSPI3_IRQ   = 33,
+
     FSL_IMX8MM_I2C1_IRQ     = 35,
     FSL_IMX8MM_I2C2_IRQ     = 36,
     FSL_IMX8MM_I2C3_IRQ     = 37,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of WDT in iMX8MM
Added WDT IRQ lines

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 28 ++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  7 +++++++
 3 files changed, 36 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
+    select WDT_IMX2
 
 config FSL_IMX8MM_EVK
     bool
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) {
+        g_autofree char *name = g_strdup_printf("wdt%d", i);
+        object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT);
+    }
+
     object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
     object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
                             TYPE_FSL_IMX8M_PCIE_PHY);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0,
                     fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr);
 
+    /* Watchdogs */
+    for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } wdog_table[FSL_IMX8MM_NUM_WDTS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG1].addr, FSL_IMX8MM_WDOG1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG2].addr, FSL_IMX8MM_WDOG2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG3].addr, FSL_IMX8MM_WDOG3_IRQ },
+        };
+
+        object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support",
+                                 true, &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, wdog_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0,
+                           qdev_get_gpio_in(gicdev, wdog_table[i].irq));
+    }
+
     /* PCIe */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_SNVS_HP:
         case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
         case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3:
+        case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3:
             /* device implemented and treated above */
             break;
 
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
 #include "hw/ssi/imx_spi.h"
+#include "hw/watchdog/wdt_imx2.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
     FSL_IMX8MM_NUM_USDHCS       = 3,
+    FSL_IMX8MM_NUM_WDTS         = 3,
 };
 
 struct FslImx8mmState {
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
+    IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
 };
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_GPIO5_LOW_IRQ  = 72,
     FSL_IMX8MM_GPIO5_HIGH_IRQ = 73,
 
+    FSL_IMX8MM_WDOG1_IRQ    = 78,
+    FSL_IMX8MM_WDOG2_IRQ    = 79,
+    FSL_IMX8MM_WDOG3_IRQ    = 10,
+
     FSL_IMX8MM_PCI_INTA_IRQ = 122,
     FSL_IMX8MM_PCI_INTB_IRQ = 123,
     FSL_IMX8MM_PCI_INTC_IRQ = 124,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of GPT in iMX8MM
Added GPT IRQ lines

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 54 +++++++++++++++++++++++++++++++++++++
 hw/timer/imx_gpt.c          | 26 ++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h | 11 ++++++++
 include/hw/timer/imx_gpt.h  |  2 ++
 5 files changed, 94 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select FSL_IMX8MP_CCM
     select IMX
     select IMX_I2C
+    select OR_IRQ
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) {
+        g_autofree char *name = g_strdup_printf("gpt%d", i + 1);
+        object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX8MM_GPT);
+    }
+    object_initialize_child(obj, "gpt5-gpt6-irq", &s->gpt5_gpt6_irq,
+                            TYPE_OR_IRQ);
+
     for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
         g_autofree char *name = g_strdup_printf("i2c%d", i + 1);
         object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* GPTs */
+    object_property_set_int(OBJECT(&s->gpt5_gpt6_irq), "num-lines", 2,
+                            &error_abort);
+    if (!qdev_realize(DEVICE(&s->gpt5_gpt6_irq), NULL, errp)) {
+        return;
+    }
+
+    qdev_connect_gpio_out(DEVICE(&s->gpt5_gpt6_irq), 0,
+                          qdev_get_gpio_in(gicdev, FSL_IMX8MM_GPT5_GPT6_IRQ));
+
+    for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) {
+        hwaddr gpt_addrs[FSL_IMX8MM_NUM_GPTS] = {
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT1].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT2].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT3].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT4].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT5].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT6].addr,
+        };
+
+        s->gpt[i].ccm = IMX_CCM(&s->ccm);
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_addrs[i]);
+
+        if (i < FSL_IMX8MM_NUM_GPTS - 2) {
+            static const unsigned int gpt_irqs[FSL_IMX8MM_NUM_GPTS - 2] = {
+                FSL_IMX8MM_GPT1_IRQ,
+                FSL_IMX8MM_GPT2_IRQ,
+                FSL_IMX8MM_GPT3_IRQ,
+                FSL_IMX8MM_GPT4_IRQ,
+            };
+
+            sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0,
+                               qdev_get_gpio_in(gicdev, gpt_irqs[i]));
+        } else {
+            int irq = i - FSL_IMX8MM_NUM_GPTS + 2;
+
+            sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0,
+                               qdev_get_gpio_in(DEVICE(&s->gpt5_gpt6_irq), irq));
+        }
+    }
+
     /* I2Cs */
     for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
+        case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6:
         case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3:
         case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/imx_gpt.c
+++ b/hw/timer/imx_gpt.c
@@ -XXX,XX +XXX,XX @@
  * Originally written by Hans Jiang
  * Updated by Peter Chubb
  * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
+ * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com>
  *
  * This code is licensed under GPL version 2 or later.  See
  * the COPYING file in the top-level directory.
@@ -XXX,XX +XXX,XX @@ static const IMXClk imx8mp_gpt_clocks[] = {
     CLK_NONE,      /* 111 not defined */
 };
 
+static const IMXClk imx8mm_gpt_clocks[] = {
+    CLK_NONE,      /* 000 No clock source */
+    CLK_IPG,       /* 001 ipg_clk, 532MHz */
+    CLK_IPG_HIGH,  /* 010 ipg_clk_highfreq */
+    CLK_EXT,       /* 011 External clock */
+    CLK_32k,       /* 100 ipg_clk_32k */
+    CLK_HIGH,      /* 101 ipg_clk_16M */
+    CLK_NONE,      /* 110 not defined */
+    CLK_NONE,      /* 111 not defined */
+};
+
 /* Must be called from within ptimer_transaction_begin/commit block */
 static void imx_gpt_set_freq(IMXGPTState *s)
 {
@@ -XXX,XX +XXX,XX @@ static void imx8mp_gpt_init(Object *obj)
     s->clocks = imx8mp_gpt_clocks;
 }
 
+static void imx8mm_gpt_init(Object *obj)
+{
+    IMXGPTState *s = IMX_GPT(obj);
+
+    s->clocks = imx8mm_gpt_clocks;
+}
+
 static const TypeInfo imx25_gpt_info = {
     .name = TYPE_IMX25_GPT,
     .parent = TYPE_SYS_BUS_DEVICE,
@@ -XXX,XX +XXX,XX @@ static const TypeInfo imx8mp_gpt_info = {
     .instance_init = imx8mp_gpt_init,
 };
 
+static const TypeInfo imx8mm_gpt_info = {
+    .name = TYPE_IMX8MM_GPT,
+    .parent = TYPE_IMX25_GPT,
+    .instance_init = imx8mm_gpt_init,
+};
+
 static void imx_gpt_register_types(void)
 {
     type_register_static(&imx25_gpt_info);
@@ -XXX,XX +XXX,XX @@ static void imx_gpt_register_types(void)
     type_register_static(&imx6ul_gpt_info);
     type_register_static(&imx7_gpt_info);
     type_register_static(&imx8mp_gpt_info);
+    type_register_static(&imx8mm_gpt_info);
 }
 
 type_init(imx_gpt_register_types)
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
+#include "hw/or-irq.h"
 #include "hw/pci-host/designware.h"
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
 #include "hw/ssi/imx_spi.h"
+#include "hw/timer/imx_gpt.h"
 #include "hw/watchdog/wdt_imx2.h"
 #include "qom/object.h"
 #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
     FSL_IMX8MM_NUM_ECSPIS       = 3,
     FSL_IMX8MM_NUM_GPIOS        = 5,
+    FSL_IMX8MM_NUM_GPTS         = 6,
     FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMXGPTState        gpt[FSL_IMX8MM_NUM_GPTS];
     IMXGPIOState       gpio[FSL_IMX8MM_NUM_GPIOS];
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
+    OrIRQState         gpt5_gpt6_irq;
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_I2C3_IRQ     = 37,
     FSL_IMX8MM_I2C4_IRQ     = 38,
 
+    FSL_IMX8MM_GPT1_IRQ      = 55,
+    FSL_IMX8MM_GPT2_IRQ      = 54,
+    FSL_IMX8MM_GPT3_IRQ      = 53,
+    FSL_IMX8MM_GPT4_IRQ      = 52,
+    FSL_IMX8MM_GPT5_GPT6_IRQ = 51,
+
     FSL_IMX8MM_GPIO1_LOW_IRQ  = 64,
     FSL_IMX8MM_GPIO1_HIGH_IRQ = 65,
     FSL_IMX8MM_GPIO2_LOW_IRQ  = 66,
diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/timer/imx_gpt.h
+++ b/include/hw/timer/imx_gpt.h
@@ -XXX,XX +XXX,XX @@
  * Originally written by Hans Jiang
  * Updated by Peter Chubb
  * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
+ * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com>
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
@@ -XXX,XX +XXX,XX @@
 #define TYPE_IMX6UL_GPT "imx6ul.gpt"
 #define TYPE_IMX7_GPT "imx7.gpt"
 #define TYPE_IMX8MP_GPT "imx8mp.gpt"
+#define TYPE_IMX8MM_GPT "imx8mm.gpt"
 
 #define TYPE_IMX_GPT TYPE_IMX25_GPT
 
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of ENET ethernet controller in iMX8MM
Enables testing and debugging of network dependent drivers
Added ENET MAC IRQ lines

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 24 ++++++++++++++++++++++++
 hw/arm/imx8mm-evk.c         |  1 +
 include/hw/arm/fsl-imx8mm.h | 10 +++++++++-
 4 files changed, 35 insertions(+), 1 deletion(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
+    select IMX_FEC
     select IMX_I2C
     select OR_IRQ
     select SDHCI
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT);
     }
 
+    object_initialize_child(obj, "eth0", &s->enet, TYPE_IMX_ENET);
+
     object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
     object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
                             TYPE_FSL_IMX8M_PCIE_PHY);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(gicdev, spi_table[i].irq));
     }
 
+    /* ENET1 */
+    object_property_set_uint(OBJECT(&s->enet), "phy-num", s->phy_num,
+                             &error_abort);
+    object_property_set_uint(OBJECT(&s->enet), "tx-ring-num", 3, &error_abort);
+    qemu_configure_nic_device(DEVICE(&s->enet), true, NULL);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->enet), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->enet), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_ENET1].addr);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 0,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_ENET1_MAC_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 1,
+                       qdev_get_gpio_in(gicdev, FSL_IMX6_ENET1_MAC_1588_IRQ));
+
     /* SNVS */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
         case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6:
         case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3:
+        case FSL_IMX8MM_ENET1:
         case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     }
 }
 
+static const Property fsl_imx8mm_properties[] = {
+    DEFINE_PROP_UINT32("fec1-phy-num", FslImx8mmState, phy_num, 0),
+    DEFINE_PROP_BOOL("fec1-phy-connected", FslImx8mmState, phy_connected, true),
+};
+
 static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(oc);
 
+    device_class_set_props(dc, fsl_imx8mm_properties);
     dc->realize = fsl_imx8mm_realize;
 
     dc->desc = "i.MX 8MM SoC";
diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/imx8mm-evk.c
+++ b/hw/arm/imx8mm-evk.c
@@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine)
 
     s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine),
                                          "soc", &error_fatal, NULL));
+    object_property_set_uint(OBJECT(s), "fec1-phy-num", 1, &error_fatal);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal);
 
     memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START,
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
-#include "hw/or-irq.h"
+#include "hw/net/imx_fec.h"
+#include "hw/core/or-irq.h"
 #include "hw/pci-host/designware.h"
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXI2CState        i2c[FSL_IMX8MM_NUM_I2CS];
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
+    IMXFECState        enet;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
     IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
     OrIRQState         gpt5_gpt6_irq;
+
+    uint32_t           phy_num;
+    bool               phy_connected;
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_WDOG2_IRQ    = 79,
     FSL_IMX8MM_WDOG3_IRQ    = 10,
 
+    FSL_IMX8MM_ENET1_MAC_IRQ    = 118,
+    FSL_IMX6_ENET1_MAC_1588_IRQ = 121,
+
     FSL_IMX8MM_PCI_INTA_IRQ = 122,
     FSL_IMX8MM_PCI_INTB_IRQ = 123,
     FSL_IMX8MM_PCI_INTC_IRQ = 124,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of USB on iMX8MM
Enables testing and debugging of USB drivers

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 27 +++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  6 ++++++
 3 files changed, 34 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
+    select USB_DWC3
     select WDT_IMX2
 
 config FSL_IMX8MM_EVK
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) {
+        g_autofree char *name = g_strdup_printf("usb%d", i);
+        object_initialize_child(obj, name, &s->usb[i], TYPE_USB_DWC3);
+    }
+
     for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
         g_autofree char *name = g_strdup_printf("spi%d", i + 1);
         object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
     }
 
+    /* USBs */
+    for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } usb_table[FSL_IMX8MM_NUM_USBS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USB1].addr, FSL_IMX8MM_USB1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USB2].addr, FSL_IMX8MM_USB2_IRQ },
+        };
+
+        qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p2", 1);
+        qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p3", 1);
+        qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "slots", 2);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), errp)) {
+            return;
+        }
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 0,
+                           qdev_get_gpio_in(gicdev, usb_table[i].irq));
+    }
+
     /* ECSPIs */
     for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_OCRAM:
         case FSL_IMX8MM_SNVS_HP:
         case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
+        case FSL_IMX8MM_USB1 ... FSL_IMX8MM_USB2:
         case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3:
         case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3:
             /* device implemented and treated above */
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/sd/sdhci.h"
 #include "hw/ssi/imx_spi.h"
 #include "hw/timer/imx_gpt.h"
+#include "hw/usb/hcd-dwc3.h"
 #include "hw/watchdog/wdt_imx2.h"
 #include "qom/object.h"
 #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
+    FSL_IMX8MM_NUM_USBS         = 2,
     FSL_IMX8MM_NUM_USDHCS       = 3,
     FSL_IMX8MM_NUM_WDTS         = 3,
 };
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXFECState        enet;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
     IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
+    USBDWC3            usb[FSL_IMX8MM_NUM_USBS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
     OrIRQState         gpt5_gpt6_irq;
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_I2C3_IRQ     = 37,
     FSL_IMX8MM_I2C4_IRQ     = 38,
 
+    FSL_IMX8MM_USB1_IRQ     = 40,
+    FSL_IMX8MM_USB2_IRQ     = 41,
+
     FSL_IMX8MM_GPT1_IRQ      = 55,
     FSL_IMX8MM_GPT2_IRQ      = 54,
     FSL_IMX8MM_GPT3_IRQ      = 53,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Added script that would validate the iMX8MM emulation by checking the
linux console log. If it succeeds, it will return:-

ok 1 test_imx8mm_evk.Imx8mmEvkMachine.test_aarch64_imx8mm_evk_usdhc

Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
[PMM: Add missing blank lines that flake8 wants]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 MAINTAINERS                                 |  1 +
 tests/functional/aarch64/meson.build        |  2 +
 tests/functional/aarch64/test_imx8mm_evk.py | 69 +++++++++++++++++++++
 3 files changed, 72 insertions(+)
 create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/arm/fsl-imx8mm.c
 F: hw/arm/imx8mm-evk.c
 F: include/hw/arm/fsl-imx8mm.h
 F: docs/system/arm/imx8m.rst
+F: tests/functional/aarch64/test_imx8mm_evk.py
 
 MCIMX8MP-EVK / i.MX8MP
 M: Bernhard Beschow <shentey@gmail.com>
diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/tests/functional/aarch64/meson.build
+++ b/tests/functional/aarch64/meson.build
@@ -XXX,XX +XXX,XX @@ test_aarch64_timeouts = {
   'aspeed_ast2700a2' : 600,
   'aspeed_ast2700fc' : 600,
   'device_passthrough' : 720,
+  'imx8mm_evk' : 240,
   'imx8mp_evk' : 240,
   'raspi4' : 480,
   'reverse_debug' : 180,
@@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [
   'aspeed_ast2700fc',
   'device_passthrough',
   'hotplug_pci',
+  'imx8mm_evk',
   'imx8mp_evk',
   'kvm',
   'multiprocess',
diff --git a/tests/functional/aarch64/test_imx8mm_evk.py b/tests/functional/aarch64/test_imx8mm_evk.py
new file mode 100755
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/functional/aarch64/test_imx8mm_evk.py
@@ -XXX,XX +XXX,XX @@
+#!/usr/bin/env python3
+#
+# Functional test that boots a Linux kernel and checks the console
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from qemu_test import LinuxKernelTest, Asset
+
+
+class Imx8mmEvkMachine(LinuxKernelTest):
+
+    ASSET_IMAGE = Asset(
+        ('https://cloud.debian.org/images/cloud/bookworm/20231210-1590/'
+         'debian-12-generic-arm64-20231210-1590.tar.xz'),
+        '7ebf1577b32d5af6204df74b54ca2e4675de9b5a9fa14f3ff70b88eeb7b3b359')
+
+    KERNEL_OFFSET = 0x51000000
+    KERNEL_SIZE = 32622528
+    INITRD_OFFSET = 0x76000000
+    INITRD_SIZE = 30987766
+    DTB_OFFSET = 0x64DB5000
+    DTB_SIZE = 36812
+
+    def extract(self, in_path, out_path, offset, size):
+        try:
+            with open(in_path, "rb") as source:
+                source.seek(offset)
+                data = source.read(size)
+            with open(out_path, "wb") as target:
+                target.write(data)
+        except (IOError, ValueError) as e:
+            self.log.error(f"Failed to extract {out_path}: {e}")
+            raise
+
+    def setUp(self):
+        super().setUp()
+
+        self.image_path = self.scratch_file("disk.raw")
+        self.kernel_path = self.scratch_file("linux")
+        self.initrd_path = self.scratch_file("initrd.zstd")
+        self.dtb_path = self.scratch_file("imx8mm-evk.dtb")
+
+        self.archive_extract(self.ASSET_IMAGE)
+        self.extract(self.image_path, self.kernel_path,
+                     self.KERNEL_OFFSET, self.KERNEL_SIZE)
+        self.extract(self.image_path, self.initrd_path,
+                     self.INITRD_OFFSET, self.INITRD_SIZE)
+        self.extract(self.image_path, self.dtb_path,
+                     self.DTB_OFFSET, self.DTB_SIZE)
+
+    def test_aarch64_imx8mm_evk_usdhc(self):
+        self.require_accelerator("tcg")
+        self.set_machine('imx8mm-evk')
+        self.vm.set_console(console_index=1)
+        self.vm.add_args('-m', '2G',
+                         '-smp', '4',
+                         '-kernel', self.kernel_path,
+                         '-initrd', self.initrd_path,
+                         '-dtb', self.dtb_path,
+                         '-append', 'root=/dev/mmcblk2p1',
+                         '-drive', f'file={self.image_path},if=sd,bus=2,'
+                                    'format=raw,id=mmcblk2,snapshot=on')
+
+        self.vm.launch()
+        self.wait_for_console_pattern('Welcome to ')
+
+
+if __name__ == '__main__':
+    LinuxKernelTest.main()
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

As mentioned by Richard in [*]:

We don't actually need any specific endianness here, because
  every byte has the same value.  So we could simply drop MO_TE.
  That would produce a store in host-endianness, which will be
  fractionally more efficient on some hosts.

[*] https://lore.kernel.org/qemu-devel/d64d3576-9188-4e74-afdc-3492c9feb8e0@linaro.org/

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260414005348.4767-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-a64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper-a64.c
+++ b/target/arm/tcg/helper-a64.c
@@ -XXX,XX +XXX,XX @@ static uint64_t set_step_tags(CPUARMState *env, uint64_t toaddr,
          * the page dirty and will use the fast path.
          */
         uint64_t repldata = data * 0x0101010101010101ULL;
-        MemOpIdx oi16 = make_memop_idx(MO_TE | MO_128, memidx);
+        MemOpIdx oi16 = make_memop_idx(MO_128, memidx);
         cpu_st16_mmu(env, toaddr, int128_make128(repldata, repldata), oi16, ra);
         mte_mops_set_tags(env, toaddr, 16, *mtedesc);
         return 16;
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Extract the implicit MO_TE definition in order to replace
it in the next commit.

Mechanical change using:

$ for n in UW UL UQ UO SW SL SQ; do \
      sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \
           $(git grep -l MO_TE$n target/arm); \
    done

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c   |  6 +--
 target/arm/tcg/mve_helper.c | 79 ++++++++++++++++++++-----------------
 2 files changed, 45 insertions(+), 40 deletions(-)

diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/m_helper.c
+++ b/target/arm/tcg/m_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest)
 
     /* Note that these stores can throw exceptions on MPU faults */
     ARMMMUIdx mmu_idx = arm_mmu_idx(env);
-    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+    MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN,
                                  arm_to_core_mmu_idx(mmu_idx));
     cpu_stl_mmu(env, sp, nextinst, oi, GETPC());
     cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC());
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr)
     bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK;
     uintptr_t ra = GETPC();
     ARMMMUIdx mmu_idx = arm_mmu_idx(env);
-    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+    MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN,
                                  arm_to_core_mmu_idx(mmu_idx));
 
     assert(env->v7m.secure);
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr)
     ARMCPU *cpu = env_archcpu(env);
     uintptr_t ra = GETPC();
     ARMMMUIdx mmu_idx = arm_mmu_idx(env);
-    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+    MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN,
                                  arm_to_core_mmu_idx(mmu_idx));
 
     /* fptr is the value of Rn, the frame pointer we load the FP regs from */
diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env)
     }
 
 DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t)
-DO_VLDR(vldrh, MO_TEUW, 2, uint16_t, ldw, 2, uint16_t)
-DO_VLDR(vldrw, MO_TEUL, 4, uint32_t, ldl, 4, uint32_t)
+DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t)
+DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t)
 
 DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t)
-DO_VSTR(vstrh, MO_TEUW, 2, stw, 2, uint16_t)
-DO_VSTR(vstrw, MO_TEUL, 4, stl, 4, uint32_t)
+DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t)
+DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t)
 
 DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t)
 DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t)
 DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t)
 DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t)
-DO_VLDR(vldrh_sw, MO_TESW, 2, int16_t, ldw, 4, int32_t)
-DO_VLDR(vldrh_uw, MO_TEUW, 2, uint16_t, ldw, 4, uint32_t)
+DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t)
+DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t)
 
 DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t)
 DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t)
-DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
+DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t)
 
 #undef DO_VLDR
 #undef DO_VSTR
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
 
 DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_sw, MO_TESW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4,
+           int32_t, uint32_t, ADDR_ADD, false)
 
 DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uh, MO_TEUW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uw, MO_TEUW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrw_sg_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
+           uint16_t, uint16_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
+           uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
+           uint32_t, uint32_t, ADDR_ADD, false)
 DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false)
 
-DO_VLDR_SG(vldrh_sg_os_sw, MO_TESW, int16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4,
            int32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uh, MO_TEUW, uint16_t, ldw, 2,
+DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
            uint16_t, uint16_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uw, MO_TEUW, uint16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
            uint32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrw_sg_os_uw, MO_TEUL, uint32_t, ldl, 4,
+DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
            uint32_t, uint32_t, ADDR_ADD_OSW, false)
 DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false)
 
 DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrw_sg_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false)
 DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false)
 
-DO_VSTR_SG(vstrh_sg_os_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrh_sg_os_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrw_sg_os_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
+DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
 DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false)
 
-DO_VLDR_SG(vldrw_sg_wb_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true)
+DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
+           uint32_t, uint32_t, ADDR_ADD, true)
 DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true)
-DO_VSTR_SG(vstrw_sg_wb_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, true)
+DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true)
 DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
 
 /*
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 43 +++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 23 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx);        \
+        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx);        \
+        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
 
 DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4,
-           int32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false)
 
 DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
-           uint16_t, uint16_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
-           uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
-           uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrw_sg_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false)
 DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false)
 
-DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_sw, MO_SW, int16_t, ldw, 4,
            int32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
+DO_VLDR_SG(vldrh_sg_os_uh, MO_UW, uint16_t, ldw, 2,
            uint16_t, uint16_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_uw, MO_UW, uint16_t, ldw, 4,
            uint32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
+DO_VLDR_SG(vldrw_sg_os_uw, MO_UL, uint32_t, ldl, 4,
            uint32_t, uint32_t, ADDR_ADD_OSW, false)
 DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false)
 
 DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrw_sg_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, false)
 DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false)
 
-DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
+DO_VSTR_SG(vstrh_sg_os_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrh_sg_os_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrw_sg_os_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
 DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false)
 
-DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
-           uint32_t, uint32_t, ADDR_ADD, true)
+DO_VLDR_SG(vldrw_sg_wb_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true)
 DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true)
-DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true)
+DO_VSTR_SG(vstrw_sg_wb_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, true)
 DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
 
 /*
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/internals.h      | 6 ++++++
 target/arm/tcg/mve_helper.c | 3 ++-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@
 #include "exec/hwaddr.h"
 #include "exec/vaddr.h"
 #include "exec/breakpoint.h"
+#include "exec/memop.h"
 #include "accel/tcg/tb-cpu-state.h"
 #include "hw/core/registerfields.h"
 #include "tcg/tcg-gvec-desc.h"
@@ -XXX,XX +XXX,XX @@
 #define BANK_HYP    6
 #define BANK_MON    7
 
+static inline MemOp mo_endian(CPUARMState *env)
+{
+    return EX_TBFLAG_ANY(env->hflags, BE_DATA) ? MO_BE : MO_LE;
+}
+
 static inline int arm_env_mmu_index(CPUARMState *env)
 {
     return EX_TBFLAG_ANY(env->hflags, MMUIDX);
diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 47 +++++++++++++++++++++++--------------
 1 file changed, 30 insertions(+), 17 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env)
         uint16_t eci_mask = mve_eci_mask(env);                          \
         unsigned b, e;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         /*                                                              \
          * R_SXTM allows the dest reg to become UNKNOWN for abandoned   \
@@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env)
         uint16_t mask = mve_element_mask(env);                          \
         unsigned b, e;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         for (b = 0, e = 0; b < 16; b += ESIZE, e++) {                   \
             if (mask & (1 << b)) {                                      \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/meson.build  | 3 ++-
 target/arm/tcg/mve_helper.c | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/meson.build
+++ b/target/arm/tcg/meson.build
@@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c'))
 arm_ss.add(files(
   'cpu32.c',
   'm_helper.c',
-  'mve_helper.c',
 ))
 
 arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
@@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add(
   'debug.c',
   'hflags.c',
   'gengvec.c',
+  'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
   'psci.c',
@@ -XXX,XX +XXX,XX @@ arm_user_ss.add(
   'debug.c',
   'gengvec.c',
   'hflags.c',
+  'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
   'tlb_helper.c',
diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@
 #include "helper-mve.h"
 #include "internals.h"
 #include "vec_internal.h"
-#include "accel/tcg/cpu-ldst.h"
+#include "accel/tcg/cpu-ldst-common.h"
 #include "tcg/tcg.h"
 #include "fpu/softfloat.h"
 #include "crypto/clmul.h"
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c  | 2 +-
 target/arm/tcg/meson.build | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/m_helper.c
+++ b/target/arm/tcg/m_helper.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/log.h"
 #include "exec/page-protection.h"
 #ifdef CONFIG_TCG
-#include "accel/tcg/cpu-ldst.h"
+#include "accel/tcg/cpu-ldst-common.h"
 #include "semihosting/common-semi.h"
 #endif
 #if !defined(CONFIG_USER_ONLY)
diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/meson.build
+++ b/target/arm/tcg/meson.build
@@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c'))
 
 arm_ss.add(files(
   'cpu32.c',
-  'm_helper.c',
 ))
 
 arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
@@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add(
   'debug.c',
   'hflags.c',
   'gengvec.c',
+  'm_helper.c',
   'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
@@ -XXX,XX +XXX,XX @@ arm_user_ss.add(
   'debug.c',
   'gengvec.c',
   'hflags.c',
+  'm_helper.c',
   'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
-- 
2.43.0

From: Thomas Huth <thuth@redhat.com>

When writing to this register, QEMU currently aborts:

$ echo "readl 0x10000018" | ./qemu-system-arm -audiodev none,id=snd0 \
    -M integratorcp,accel=qtest,audiodev=snd0 -display none -qtest stdio
 [I 0.000000] OPENED
 [R +0.001907] readl 0x10000018
 qemu: hardware error: integratorcm_read: CM_LMBUSCNT
 [...]
 Aborted                    (core dumped)

This is bad, a guest should ideally never be able to kill QEMU like this.

Now, according to the "Intergrator/CP User Guide" from:

https://developer.arm.com/documentation/dui0159/b/porting-integrator-ap-and-im-pd1/registers

"The Integrator/AP CM_LMBUSCNT has been removed."

That means this register does not seem to be implemented on real CP boards
at all, only for older AP boards. Thus it should be fine if we simply
ignore this register in QEMU and handle it like all other unimplemented
registers in the "default" handler of the case statement.

Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3407
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260420064933.64765-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/integratorcp.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/integratorcp.c
+++ b/hw/arm/integratorcp.c
@@ -XXX,XX +XXX,XX @@ static uint64_t integratorcm_read(void *opaque, hwaddr offset,
         } else {
             return s->cm_lock;
         }
-    case 6: /* CM_LMBUSCNT */
-        /* ??? High frequency timer.  */
-        hw_error("integratorcm_read: CM_LMBUSCNT");
     case 7: /* CM_AUXOSC */
         return s->cm_auxosc;
     case 8: /* CM_SDRAM */
-- 
2.43.0

include/hw/arm/primecell.h used to be more expansive, but now the
only thing it defines is the ARM_SYSCTL_GPIO_* constants for the GPIO
lines for the arm-sysctl system-control device used on the Realview,
Versatile and Versatile Express boards.

Replace it with a header file specific to that device.

virt.c and vmapple.c included primecell.h despite not using the
constants it defined; there we can simply drop the include entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260416172627.690396-1-peter.maydell@linaro.org
---
 MAINTAINERS                  |  2 +-
 hw/arm/realview.c            |  2 +-
 hw/arm/vexpress.c            |  2 +-
 hw/arm/virt.c                |  1 -
 hw/misc/arm_sysctl.c         |  2 +-
 hw/vmapple/vmapple.c         |  1 -
 include/hw/arm/primecell.h   | 12 ------------
 include/hw/misc/arm_sysctl.h | 16 ++++++++++++++++
 8 files changed, 20 insertions(+), 18 deletions(-)
 delete mode 100644 include/hw/arm/primecell.h
 create mode 100644 include/hw/misc/arm_sysctl.h

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/ssi/pl022.c
 F: include/hw/ssi/pl022.h
 F: hw/rtc/pl031.c
 F: include/hw/rtc/pl031.h
-F: include/hw/arm/primecell.h
 F: hw/timer/cmsdk-apb-timer.c
 F: include/hw/timer/cmsdk-apb-timer.h
 F: tests/qtest/cmsdk-apb-timer-test.c
@@ -XXX,XX +XXX,XX @@ F: hw/*/versatile*
 F: hw/i2c/arm_sbcon_i2c.c
 F: include/hw/i2c/arm_sbcon_i2c.h
 F: hw/misc/arm_sysctl.c
+F: include/hw/misc/arm_sysctl.h
 F: docs/system/arm/versatile.rst
 
 Virt
diff --git a/hw/arm/realview.c b/hw/arm/realview.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/realview.c
+++ b/hw/arm/realview.c
@@ -XXX,XX +XXX,XX @@
 #include "target/arm/cpu.h"
 #include "hw/core/sysbus.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/arm/machines-qom.h"
 #include "hw/core/split-irq.h"
+#include "hw/misc/arm_sysctl.h"
 #include "hw/net/lan9118.h"
 #include "hw/net/smc91c111.h"
 #include "hw/pci/pci.h"
diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/vexpress.c
+++ b/hw/arm/vexpress.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/datadir.h"
 #include "hw/core/sysbus.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/arm/machines-qom.h"
+#include "hw/misc/arm_sysctl.h"
 #include "hw/net/lan9118.h"
 #include "hw/i2c/i2c.h"
 #include "net/net.h"
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -XXX,XX +XXX,XX @@
 #include "monitor/qdev.h"
 #include "hw/core/sysbus.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/arm/virt.h"
 #include "hw/arm/machines-qom.h"
 #include "hw/block/flash.h"
diff --git a/hw/misc/arm_sysctl.c b/hw/misc/arm_sysctl.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/arm_sysctl.c
+++ b/hw/misc/arm_sysctl.c
@@ -XXX,XX +XXX,XX @@
 #include "system/runstate.h"
 #include "qemu/bitops.h"
 #include "hw/core/sysbus.h"
+#include "hw/misc/arm_sysctl.h"
 #include "migration/vmstate.h"
-#include "hw/arm/primecell.h"
 #include "qemu/log.h"
 #include "qemu/module.h"
 #include "qom/object.h"
diff --git a/hw/vmapple/vmapple.c b/hw/vmapple/vmapple.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/vmapple/vmapple.c
+++ b/hw/vmapple/vmapple.c
@@ -XXX,XX +XXX,XX @@
 #include "hw/core/sysbus.h"
 #include "hw/usb/usb.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/char/pl011.h"
 #include "hw/intc/arm_gic.h"
 #include "hw/intc/arm_gicv3_common.h"
diff --git a/include/hw/arm/primecell.h b/include/hw/arm/primecell.h
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/include/hw/arm/primecell.h
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-#ifndef PRIMECELL_H
-#define PRIMECELL_H
-
-/* Declarations for ARM PrimeCell based periperals.  */
-/* Also includes some devices that are currently only used by the
-   ARM boards.  */
-
-/* arm_sysctl GPIO lines */
-#define ARM_SYSCTL_GPIO_MMC_WPROT 0
-#define ARM_SYSCTL_GPIO_MMC_CARDIN 1
-
-#endif
diff --git a/include/hw/misc/arm_sysctl.h b/include/hw/misc/arm_sysctl.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/misc/arm_sysctl.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * Status and system control registers for ARM RealView/Versatile boards.
+ *
+ * Copyright (c) Linaro Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef HW_MISC_ARM_SYSCTL_H
+#define HW_MISC_ARM_SYSCTL_H
+
+/* arm_sysctl inbound GPIO lines */
+#define ARM_SYSCTL_GPIO_MMC_WPROT 0
+#define ARM_SYSCTL_GPIO_MMC_CARDIN 1
+
+#endif
-- 
2.43.0

If we create a normally-AArch64 CPU and configure it with
aarch64=off, this will by default leave all the AArch64 ID register
values in its ARMISARegisters struct untouched.  That in turn means
that tests of cpu_isar_feature(aa64_something, cpu) will return true.

Until now we have had a design policy that you shouldn't check an
aa64_ feature unless you know that the CPU has AArch64; but this is
quite fragile as it's easy to forget and only causes a problem in the
corner case where AArch64 was turned off.  In particular, when we
extend the ability to disable AArch64 from only KVM to also TCG there
are many more aa64 feature check points which we would otherwise have
to audit for whether they needed to be guarded with a check on
ARM_FEATURE_AARCH64.

Instead, make the CPU realize function zero out all the 64-bit ID
registers if a TCG CPU doesn't have AArch64; this will make aa64_
feature tests generally return false.

We only do this for TCG because only TCG really needs it, and for
KVM it might be confusing to have QEMU's idea of the ID registers
be different from KVM's.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260416165353.589569-2-peter.maydell@linaro.org
---
 target/arm/cpu.c | 35 +++++++++++++++++++++++++++++++++++
 target/arm/cpu.h |  3 ++-
 2 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp)
     }
 }
 
+static void arm_clear_aarch64_idregs(ARMCPU *cpu)
+{
+    /* Zero out all the AArch64 ID registers in ARMISARegisters */
+    SET_IDREG(&cpu->isar, ID_AA64ISAR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64ISAR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64ISAR2, 0);
+    SET_IDREG(&cpu->isar, ID_AA64PFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64PFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64PFR2, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR2, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR3, 0);
+    SET_IDREG(&cpu->isar, ID_AA64DFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64DFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64AFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64AFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64ZFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64SMFR0, 0);
+}
+
 static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
 {
     CPUState *cs = CPU(dev);
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
     }
 #endif
 
+    /*
+     * A TCG aarch64=off CPU has no AArch64 at all, so we clear out the
+     * ID registers to avoid cpu_isar_feature(aa64_something, cpu) tests
+     * incorrectly returning true. We don't do this for other accelerators
+     * (which in practice means "for KVM", since no others have AArch32
+     * guest support) because from KVM's point of view the AArch64 ID
+     * registers still exist and must have their correct values. So we
+     * avoid clearing them out so that we don't have QEMU and KVM with
+     * different ideas of the ID registers.
+     */
+    if (tcg_enabled() && !arm_feature(env, ARM_FEATURE_AARCH64)) {
+        arm_clear_aarch64_idregs(cpu);
+    }
+
 #ifdef CONFIG_USER_ONLY
     /*
      * User mode relies on IC IVAU instructions to catch modification of
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ struct ArchCPU {
      * Note that if you add an ID register to the ARMISARegisters struct
      * you need to also update the 32-bit and 64-bit versions of the
      * kvm_arm_get_host_cpu_features() function to correctly populate the
-     * field by reading the value from the KVM vCPU.
+     * field by reading the value from the KVM vCPU. If it is an AArch64
+     * ID register then you also must update arm_clear_aarch64_idregs().
      */
     struct ARMISARegisters {
         uint32_t mvfr0;
-- 
2.43.0

Allow the 'aarch64=off' property, which is currently KVM-only, to
be set for TCG CPUs also.

Note that we don't permit it on the qemu-aarch64 user-mode binary:
this makes no sense as that executable can only handle AArch64
syscalls (and it would also assert at startup since it doesn't
compile in the A32-specific GDB xml files like arm-neon.xml).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260416165353.589569-3-peter.maydell@linaro.org
---
 docs/system/arm/cpu-features.rst | 10 +++++----
 target/arm/cpu-features.h        |  5 +++++
 target/arm/cpu.c                 | 36 ++++++++++++++++++++++++++++----
 tests/qtest/arm-cpu-features.c   |  8 ++-----
 4 files changed, 45 insertions(+), 14 deletions(-)

diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/cpu-features.rst
+++ b/docs/system/arm/cpu-features.rst
@@ -XXX,XX +XXX,XX @@ not implement ARMv8-A, will not have the ``aarch64`` CPU property.
 QEMU's support may be limited for some CPU features, only partially
 supporting the feature or only supporting the feature under certain
 configurations.  For example, the ``aarch64`` CPU feature, which, when
-disabled, enables the optional AArch32 CPU feature, is only supported
-when using the KVM accelerator and when running on a host CPU type that
-supports the feature.  While ``aarch64`` currently only works with KVM,
-it could work with TCG.  CPU features that are specific to KVM are
+disabled, enables the optional AArch32 CPU feature, can only be set to
+``off`` on the TCG and KVM accelerators, and it cannot be set to
+``off`` under KVM unless running on a host CPU type that supports
+running guests in AArch32.
+
+CPU features that are inherently specific to KVM are
 prefixed with "kvm-" and are described in "KVM VCPU Features".
 
 CPU Feature Probing
diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu-features.h
+++ b/target/arm/cpu-features.h
@@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_aa32_el2(const ARMISARegisters *id)
     return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL2) >= 2;
 }
 
+static inline bool isar_feature_aa64_aa32_el3(const ARMISARegisters *id)
+{
+    return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL3) >= 2;
+}
+
 static inline bool isar_feature_aa64_ras(const ARMISARegisters *id)
 {
     return FIELD_EX64_IDREG(id, ID_AA64PFR0, RAS) != 0;
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_set_aarch64(Object *obj, bool value, Error **errp)
      * uniform execution state like do_interrupt.
      */
     if (value == false) {
-        if (!kvm_enabled() || !kvm_arm_aarch32_supported()) {
-            error_setg(errp, "'aarch64' feature cannot be disabled "
-                             "unless KVM is enabled and 32-bit EL1 "
-                             "is supported");
+        if (kvm_enabled()) {
+            if (!kvm_arm_aarch32_supported()) {
+                error_setg(errp, "'aarch64' feature cannot be disabled for KVM "
+                           "because this host does not support 32-bit EL1");
+                return;
+            }
+        } else if (tcg_enabled()) {
+#ifdef CONFIG_USER_ONLY
+            error_setg(errp, "'aarch64' feature cannot be disabled for "
+                       "usermode emulator qemu-aarch64; use qemu-arm instead");
+            return;
+#else
+            bool aa32_at_highest_el;
+            if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) {
+                aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el3, cpu);
+            } else if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) {
+                aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el2, cpu);
+            } else {
+                aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el1, cpu);
+            }
+
+            if (!aa32_at_highest_el) {
+                error_setg(errp, "'aarch64' feature cannot be disabled for "
+                           "this TCG CPU because it does not support 32-bit "
+                           "execution at its highest implemented exception "
+                           "level");
+                return;
+            }
+#endif
+        } else {
+            error_setg(errp, "'aarch64' feature cannot be disabled for "
+                       "this accelerator");
             return;
         }
         unset_feature(&cpu->env, ARM_FEATURE_AARCH64);
diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c
index XXXXXXX..XXXXXXX 100644
--- a/tests/qtest/arm-cpu-features.c
+++ b/tests/qtest/arm-cpu-features.c
@@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data)
         sve_tests_default(qts, "max");
         pauth_tests_default(qts, "max");
 
-        /* Test that features that depend on KVM generate errors without. */
-        assert_error(qts, "max",
-                     "'aarch64' feature cannot be disabled "
-                     "unless KVM is enabled and 32-bit EL1 "
-                     "is supported",
-                     "{ 'aarch64': false }");
+        /* TCG allows us to turn off AArch64 on the 'max' CPU type */
+        assert_set_feature(qts, "max", "aarch64", false);
     }
 
     qtest_quit(qts);
-- 
2.43.0

Add a basic test of the TCG 'aarch64=off' functionality; this is the
same as our existing arm/test_virt test, but it runs the AArch32
guest kernel on qemu-system-aarch64 with -cpu max,aarch64=off.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260416165353.589569-4-peter.maydell@linaro.org
---
 tests/functional/aarch64/meson.build          |  1 +
 .../aarch64/test_virt_aarch64_off.py          | 37 +++++++++++++++++++
 2 files changed, 38 insertions(+)
 create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py

diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/tests/functional/aarch64/meson.build
+++ b/tests/functional/aarch64/meson.build
@@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [
   'tcg_plugins',
   'tuxrun',
   'virt',
+  'virt_aarch64_off',
   'virt_gpu',
   'virt_vbsa',
   'xen',
diff --git a/tests/functional/aarch64/test_virt_aarch64_off.py b/tests/functional/aarch64/test_virt_aarch64_off.py
new file mode 100755
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/functional/aarch64/test_virt_aarch64_off.py
@@ -XXX,XX +XXX,XX @@
+#!/usr/bin/env python3
+#
+# Functional test that boots an AArch32 Linux kernel and checks the console
+# on a TCG aarch64 CPU with aarch64=off. This is the same image etc
+# as we use in tests/functional/arm/test_virt.py.
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from qemu_test import LinuxKernelTest, Asset
+
+class ArmVirtMachine(LinuxKernelTest):
+
+    ASSET_KERNEL = Asset(
+        ('https://archives.fedoraproject.org/pub/archive/fedora/linux/'
+         'releases/29/Everything/armhfp/os/images/pxeboot/vmlinuz'),
+        '18dd5f1a9a28bd539f9d047f7c0677211bae528e8712b40ca5a229a4ad8e2591')
+
+    def test_arm_virt(self):
+        self.set_machine('virt')
+        # KVM aarch64=off requires a host CPU that supports it, so
+        # restrict the test to TCG only
+        self.require_accelerator('tcg')
+        self.vm.add_args('-cpu', 'max,aarch64=off')
+
+        kernel_path = self.ASSET_KERNEL.fetch()
+
+        self.vm.set_console()
+        kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+                               'console=ttyAMA0')
+        self.vm.add_args('-kernel', kernel_path,
+                         '-append', kernel_command_line)
+        self.vm.launch()
+        console_pattern = 'Kernel command line: %s' % kernel_command_line
+        self.wait_for_console_pattern(console_pattern)
+
+if __name__ == '__main__':
+    LinuxKernelTest.main()
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

We introduce a datatype for a tolerance with respect to a given
cpreg migration issue. The tolerance applies to a given cpreg kvm index,
and can be of different types:
a) mismatch in cpreg indexes
- ToleranceNotOnBothEnds (cpreg index is allowed to be only present
  on one end)
- ToleranceOnlySrcTestValue (cpreg index is allowed to be only
  present in source if its value @mask field matches @value)
b) mismatch in cpreg values
- ToleranceDiffInMask (value differences are allowed only within a mask)
- ToleranceFieldLT (incoming field value must be less than a given value)
- ToleranceFieldGT (incoming field value must be greater than a given value)

A QLIST of such tolerances can be populated using a new helper:
arm_register_cpreg_mig_tolerance() and arm_cpu_match_cpreg_mig_tolerance()
allows to check whether a tolerance exists for a given kvm index and its
criterion is matched.

callers for those helpers will be introduced in subsequent patches.

Only registration of migration tolerances related to cpreg index
mismatch is currently allowed.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20260420140552.104369-2-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.c       | 82 ++++++++++++++++++++++++++++++++++++++++++
 target/arm/cpu.h       |  1 +
 target/arm/internals.h | 54 ++++++++++++++++++++++++++++
 3 files changed, 137 insertions(+)

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook,
     QLIST_INSERT_HEAD(&cpu->el_change_hooks, entry, node);
 }
 
+static ARMCPRegMigTolerance *find_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx)
+{
+    ARMCPRegMigTolerance *t;
+    QLIST_FOREACH(t, &cpu->cpreg_mig_tolerances, node) {
+        if (t->kvmidx == kvmidx)  {
+            return t;
+        }
+    }
+    return NULL;
+}
+
+void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                      uint64_t mask, uint64_t value,
+                                      ARMCPRegMigToleranceType type)
+{
+    ARMCPRegMigTolerance *entry;
+
+    /* make sure the kvmidx has not tolerance already registered */
+    assert(!find_mig_tolerance(cpu, kvmidx));
+
+    assert(type == ToleranceNotOnBothEnds ||
+           type == ToleranceOnlySrcTestValue);
+
+    entry = g_new0(ARMCPRegMigTolerance, 1);
+
+    entry->kvmidx = kvmidx;
+    entry->mask = mask;
+    entry->value = value;
+    entry->type = type;
+
+    QLIST_INSERT_HEAD(&cpu->cpreg_mig_tolerances, entry, node);
+}
+
+bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                       uint64_t vmstate_value, uint64_t local_value,
+                                       ARMCPRegMigToleranceType type)
+{
+    ARMCPRegMigTolerance *t = find_mig_tolerance(cpu, kvmidx);
+    uint64_t diff, diff_outside_mask, field;
+
+    if (!t || t->type != type) {
+        return false;
+    }
+
+    if (type == ToleranceNotOnBothEnds) {
+        return true;
+    }
+
+    if (type == ToleranceOnlySrcTestValue &&
+        ((vmstate_value & t->mask) == t->value)) {
+        return true;
+    }
+
+    /* Need to check the mask */
+    diff = vmstate_value ^ local_value;
+    diff_outside_mask = diff & ~t->mask;
+
+    if (diff_outside_mask) {
+        /* there are differences outside of the mask */
+        return false;
+    }
+    if (type == ToleranceDiffInMask) {
+        /* differences only in the field, tolerance matched */
+        return true;
+    }
+    /* need to compare field value against authorized ones */
+    field = vmstate_value & t->mask;
+    if (type == ToleranceFieldLT && (field < t->value)) {
+        return true;
+    }
+    if (type == ToleranceFieldGT && (field > t->value)) {
+        return true;
+    }
+    return false;
+}
+
 static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque)
 {
     /* Reset a single ARMCPRegInfo register */
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj)
 
     QLIST_INIT(&cpu->pre_el_change_hooks);
     QLIST_INIT(&cpu->el_change_hooks);
+    QLIST_INIT(&cpu->cpreg_mig_tolerances);
 
 #ifdef CONFIG_USER_ONLY
 # ifdef TARGET_AARCH64
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
     ARMELChangeHook *hook, *next;
+    ARMCPRegMigTolerance *t, *n;
 
     g_hash_table_destroy(cpu->cp_regs);
 
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj)
         QLIST_REMOVE(hook, node);
         g_free(hook);
     }
+    QLIST_FOREACH_SAFE(t, &cpu->cpreg_mig_tolerances, node, n) {
+        QLIST_REMOVE(t, node);
+        g_free(t);
+    }
 #ifndef CONFIG_USER_ONLY
     if (cpu->pmu_timer) {
         timer_free(cpu->pmu_timer);
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ struct ArchCPU {
 
     QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks;
     QLIST_HEAD(, ARMELChangeHook) el_change_hooks;
+    QLIST_HEAD(, ARMCPRegMigTolerance) cpreg_mig_tolerances;
 
     int32_t node_id; /* NUMA node this CPU belongs to */
 
diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ int compare_u64(const void *a, const void *b);
 /* Used in FEAT_MEC to set the MECIDWidthm1 field in the MECIDR_EL2 register. */
 #define MECID_WIDTH 16
 
+typedef enum {
+    ToleranceNotOnBothEnds,
+    ToleranceOnlySrcTestValue,
+    ToleranceDiffInMask,
+    ToleranceFieldLT,
+    ToleranceFieldGT,
+} ARMCPRegMigToleranceType;
+
+typedef struct ARMCPRegMigTolerance {
+    uint64_t kvmidx;
+    uint64_t mask;
+    uint64_t value;
+    ARMCPRegMigToleranceType type;
+    QLIST_ENTRY(ARMCPRegMigTolerance) node;
+} ARMCPRegMigTolerance;
+
+/**
+ * arm_register_cpreg_mig_tolerance:
+ * Register a migration tolerance wrt one given cpreg identified by its
+ * @kvmidx. Calling this function twice for the same @kvmidx is a
+ * programming error and will cause an assertion failure.
+ *
+ * @cpu: vcpu to apply the migration tolerance on
+ * @kvmidx: kvm index of the cpreg the tolerance applies to
+ * @mask: bitmask where a difference is tolerated
+ *        (relevant with ToleranceDiffInMask)
+ * @value: value the bitmask field is compared with
+ *        (relevant with ToleranceFieldLT and ToleranceFieldGT)
+ * @type: type of the migration tolerance:
+ * - ToleranceNotOnBothEnds (cpreg index is allowed to be only present
+ *   on one end)
+ * - ToleranceOnlySrcTestValue (cpreg index is allowed to be only
+ *   present in source if its value @mask field matches @value)
+ * - ToleranceDiffInMask (mismatch in cpreg values are only tolerated
+ *   if differences are within @mask)
+ * - ToleranceFieldLT (mismatch in cpreg values are only tolerated
+ *   if incoming @bitmask field value is less than @value)
+ * - ToleranceFieldGT (mismatch in cpreg values are only tolerated
+ *   if incoming @bitmask field value is greater than @value)
+ */
+void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                      uint64_t mask, uint64_t value,
+                                      ARMCPRegMigToleranceType type);
+
+/**
+ * arm_cpu_match_cpreg_mig_tolerance:
+ * Check whether a tolerance of type @type exists for a given @kvmidx
+ * and the tolerance criterion is satisfied
+ */
+bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                       uint64_t vmstate_value, uint64_t local_value,
+                                       ARMCPRegMigToleranceType type);
+
+
 #endif
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

If there is a mismatch between the cpreg indexes found on both ends,
check whether a tolerance was registered for the given kvmidx. If any,
silence warning/errors.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-3-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/machine.c    | 21 +++++++++++++++------
 target/arm/trace-events |  2 ++
 2 files changed, 17 insertions(+), 6 deletions(-)

diff --git a/target/arm/machine.c b/target/arm/machine.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx
 {
     g_autofree gchar *name = print_register_name(kvmidx);
 
+    if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
+                                          0, 0, ToleranceNotOnBothEnds)) {
+        trace_tolerate_cpreg_missing_in_incoming_stream(name);
+        return;
+    }
     warn_report("%s: %s "
                 "expected by the destination but not in the incoming stream: "
                  "skip it", __func__, name);
 }
 
 /*
- * Handle the situation where @kvmidx is in the incoming stream
- * but not on destination. This currently fails the migration but
- * we plan to accomodate some exceptions, hence the boolean returned value.
+ * Handle the situation where @kvmidx is in the incoming
+ * stream but not on destination. This fails the migration if
+ * no cpreg mig tolerance is matched for this @kvmidx
+ * Return true if the migration should eventually fail
  */
 static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx)
 {
     g_autofree gchar *name = print_register_name(kvmidx);
-    bool fail = true;
 
+    if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
+                                          0, 0, ToleranceNotOnBothEnds)) {
+        trace_tolerate_cpreg_only_in_incoming_stream(name);
+        return false;
+    }
     error_report("%s: %s in the incoming stream but unknown on the "
                  "destination: fail migration", __func__, name);
-
-    return fail;
+    return true;
 }
 
 static int cpu_post_load(void *opaque, int version_id)
diff --git a/target/arm/trace-events b/target/arm/trace-events
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/trace-events
+++ b/target/arm/trace-events
@@ -XXX,XX +XXX,XX @@ arm_psci_call(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3, uint32_t cpuid
 
 # machine.c
 cpu_post_load(uint32_t cpreg_vmstate_array_len, uint32_t cpreg_array_len) "cpreg_vmstate_array_len=%d cpreg_array_len=%d"
+tolerate_cpreg_missing_in_incoming_stream(char *name) "%s is missing in incoming stream but this is explicitly tolerated"
+tolerate_cpreg_only_in_incoming_stream(char *name) "%s is in incoming stream but not on destination but this is explicitly tolerated"
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

Pass the value of the incoming register to
handle_cpreg_only_in_incoming_stream and check whether there is
a matching ToleranceOnlySrcTestValue tolerance.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20260420140552.104369-4-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/machine.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/target/arm/machine.c b/target/arm/machine.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx
  * no cpreg mig tolerance is matched for this @kvmidx
  * Return true if the migration should eventually fail
  */
-static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx)
+static bool
+handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx, uint64_t value)
 {
     g_autofree gchar *name = print_register_name(kvmidx);
 
     if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
-                                          0, 0, ToleranceNotOnBothEnds)) {
+                                          0, 0, ToleranceNotOnBothEnds) ||
+        arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
+                                          value, 0, ToleranceOnlySrcTestValue)) {
         trace_tolerate_cpreg_only_in_incoming_stream(name);
         return false;
     }
@@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id)
         }
         if (cpu->cpreg_vmstate_indexes[v] < cpu->cpreg_indexes[i]) {
             fail = handle_cpreg_only_in_incoming_stream(cpu,
-                                                        cpu->cpreg_vmstate_indexes[v++]);
+                                                        cpu->cpreg_vmstate_indexes[v],
+                                                        cpu->cpreg_vmstate_values[v]);
+            v++;
             continue;
         }
         /* matching register, copy the value over */
@@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id)
      */
     for ( ; v < cpu->cpreg_vmstate_array_len; v++) {
         fail = handle_cpreg_only_in_incoming_stream(cpu,
-                                                    cpu->cpreg_vmstate_indexes[v]);
+                                                    cpu->cpreg_vmstate_indexes[v],
+                                                    cpu->cpreg_vmstate_values[v]);
     }
     if (fail) {
         return -1;
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

Before linux v6.13 those registers were erroneously unconditionally
exposed and this was fixed by commits:
- 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace when
                 disabled for guests")
- a68cddbe47ef ("KVM: arm64: Hide S1PIE registers from userspace
                 when disabled for guests")
in v6.13.

This means if we migrate from an old kernel host to a >= 6.13 kernel
host, migration currently fails.

Declare cpreg migration tolerance for those registers.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-5-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu64.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj)
     define_cortex_a72_a57_a53_cp_reginfo(cpu);
 }
 
+#if defined(CONFIG_KVM)
+static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu)
+{
+    /*
+     * Registers that may be in the incoming stream and not exposed
+     * on the destination
+     */
+
+    /*
+     * TCR_EL1 was erroneously unconditionnally exposed before linux v6.13.
+     * See commit 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace
+     * when disabled for guests")
+     */
+    arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 2, 0, 3),
+                                     0, 0, ToleranceNotOnBothEnds);
+    /*
+     * PIRE0_EL1 and PIR_EL1 were erroneously unconditionnally exposed
+     * before linux v6.13. See commit a68cddbe47ef ("KVM: arm64: Hide
+     * S1PIE registers from userspace when disabled for guests")
+     */
+    arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 2),
+                                     0, 0, ToleranceNotOnBothEnds);
+    arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3),
+                                     0, 0, ToleranceNotOnBothEnds);
+}
+#endif
+
 static void aarch64_host_initfn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
@@ -XXX,XX +XXX,XX @@ static void aarch64_host_initfn(Object *obj)
 #endif
 
 #if defined(CONFIG_KVM)
+    kvm_arm_set_cpreg_mig_tolerances(cpu);
     kvm_arm_set_cpu_features_from_host(cpu);
     aarch64_add_sve_properties(obj);
 #elif defined(CONFIG_HVF)
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed
from v6.15 onwards. Backward migration from a >= v6.15 to an older
kernel would fail without cpreg migration tolerance definition
for this register. If the register is present on source but not
on destination, its value must be checked to make sure it matches
the reset value, ie. 0, meaning no service is exposed to the guest,
hence the choice of a ToleranceOnlySrcTestValue migration
tolerance.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-6-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu64.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu)
                                      0, 0, ToleranceNotOnBothEnds);
     arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3),
                                      0, 0, ToleranceNotOnBothEnds);
+
+    /*
+     * KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed
+     * from v6.15 onwards. Backward migration from a >= v6.15 to an older
+     * kernel would fail without cpreg migration tolerance definition.
+     * If the register is present on source but not on destination, make
+     * sure it has its reset value, ie. 0, meaning no service is exposed
+     * to the guest.
+     */
+    arm_register_cpreg_mig_tolerance(cpu, KVM_REG_ARM_FW_FEAT_BMAP_REG(3),
+                                     UINT64_MAX, 0, ToleranceOnlySrcTestValue);
 }
 #endif
 
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

We want to remove AArch32 DBGDTRTX which was erroneously exposed.
This was attempted by 655659a74a36b ("target/arm: Correct encoding
of Debug Communications Channel registers") but it was discovered
that the removal of this debug register broke forward migration on
TCG. Now we have the cpreg migration tolerance infrastructure, we
can declare one for the DBGDTRTX. This allow to revert the reinstate
patch.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-7-eric.auger@redhat.com
[PMM: revised comment, included note about when we can drop
 the workaround]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
             .fgt = FGT_CLIDR_EL1,
             .resetvalue = GET_IDREG(isar, CLIDR)
         };
+        uint64_t dbgtr_el0_kvmidx =
+            cpreg_to_kvm_id(ENCODE_CP_REG(14, 0, 1, 0, 5, 3, 0));
+
         define_one_arm_cp_reg(cpu, &clidr);
         define_arm_cp_regs(cpu, v7_cp_reginfo);
         define_debug_regs(cpu);
+        /*
+         * We used to incorrectly expose a non-existent AArch32 "DBGDTRTX"
+         * register with this encoding. This has been fixed by commit
+         * 655659a74a36 ("target/arm: Correct encoding of Debug
+         * Communications Channel registers") by the introduction of correct
+         * separate cpreg definitions for AA64 and AA32 versions. However,
+         * the old cpreg definition couldn't be removed without breaking
+         * migration, so commit 4f2b82f604 reinstated the bogus encoding
+         * for migration data only.
+         *
+         * Now that we have migration tolerance infrastructure, we can use
+         * this to allow forward migration from the buggy QEMU versions,
+         * accepting and ignoring the bogus register if it is in the
+         * source data. QEMU 11.0 was the last version that sent the
+         * bogus encoding, so this workaround can be removed at the point
+         * where we no longer care about migration from that version
+         * (i.e. when we remove the "virt-11.0" machine type).
+         */
+        arm_register_cpreg_mig_tolerance(cpu, dbgtr_el0_kvmidx,
+                                         0, 0, ToleranceNotOnBothEnds);
     } else {
         define_arm_cp_regs(cpu, not_v7_cp_reginfo);
     }
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

This reverts commit 4f2b82f60431 ("target/arm: Reinstate bogus AArch32
DBGDTRTX register for migration compat). We don't need that commit
anymore as the AArch32 DBGDTRTX register is declared to
be safe to ignore in the incoming migration stream.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-8-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/debug_helper.c | 29 -----------------------------
 1 file changed, 29 deletions(-)

diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/debug_helper.c
+++ b/target/arm/debug_helper.c
@@ -XXX,XX +XXX,XX @@ static void dbgclaimclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
     env->cp15.dbgclaim &= ~(value & 0xFF);
 }
 
-static CPAccessResult access_bogus(CPUARMState *env, const ARMCPRegInfo *ri,
-                                   bool isread)
-{
-    /* Always UNDEF, as if this cpreg didn't exist */
-    return CP_ACCESS_UNDEFINED;
-}
-
 static const ARMCPRegInfo debug_cp_reginfo[] = {
     /*
      * DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = {
       .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 4, .opc2 = 0,
       .access = PL0_RW, .accessfn = access_tdcc,
       .type = ARM_CP_CONST, .resetvalue = 0 },
-    /*
-     * This is not a real AArch32 register. We used to incorrectly expose
-     * this due to a QEMU bug; to avoid breaking migration compatibility we
-     * need to continue to provide it so that we don't fail the inbound
-     * migration when it tells us about a sysreg that we don't have.
-     * We set an always-fails .accessfn, which means that the guest doesn't
-     * actually see this register (it will always UNDEF, identically to if
-     * there were no cpreg definition for it other than that we won't print
-     * a LOG_UNIMP message about it), and we set the ARM_CP_NO_GDB flag so the
-     * gdbstub won't see it either.
-     * (We can't just set .access = 0, because add_cpreg_to_hashtable()
-     * helpfully ignores cpregs which aren't accessible to the highest
-     * implemented EL.)
-     *
-     * TODO: implement a system for being able to describe "this register
-     * can be ignored if it appears in the inbound stream"; then we can
-     * remove this temporary hack.
-     */
-    { .name = "BOGUS_DBGDTR_EL0", .state = ARM_CP_STATE_AA32,
-      .cp = 14, .opc1 = 3, .crn = 0, .crm = 5, .opc2 = 0,
-      .access = PL0_RW, .accessfn = access_bogus,
-      .type = ARM_CP_CONST | ARM_CP_NO_GDB, .resetvalue = 0 },
     /*
      * OSECCR_EL1 provides a mechanism for an operating system
      * to access the contents of EDECCR. EDECCR is not implemented though,
-- 
2.43.0

From: Osama Abdelkader <osama.abdelkader@gmail.com>

fdt_node_offset_by_compatible(fdt, -1, compat) only finds the first match.
If the blob has more than one node with the same compatible string, extra
nodes will remain active. Remove all the matching nodes, using the same
loop as imx8mp-evk.c does for this purpose.

Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Message-id: 20260420162114.308519-1-osama.abdelkader@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/raspi4b.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/raspi4b.c
+++ b/hw/arm/raspi4b.c
@@ -XXX,XX +XXX,XX @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt)
 
     for (int i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) {
         const char *dev_str = nodes_to_remove[i];
+        int offset;
 
-        int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
-        if (offset >= 0) {
-            if (!fdt_nop_node(fdt, offset)) {
-                warn_report("bcm2711 dtc: %s has been disabled!", dev_str);
+        offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
+        while (offset >= 0) {
+            if (fdt_nop_node(fdt, offset) == 0) {
+                warn_report("bcm2711 dtb: %s has been disabled!", dev_str);
             }
+            offset = fdt_node_offset_by_compatible(fdt, offset, dev_str);
         }
     }
 
-- 
2.43.0

From: Yucai Liu <1486344514@qq.com>

Implement a basic i.MX6UL LCDIF controller model with MMIO registers,
frame-done interrupt behavior, and framebuffer-backed display updates
for RGB565 and XRGB8888 input formats.

Place the LCDIF device under hw/display and build it via a dedicated
CONFIG_IMX6UL_LCDIF symbol. Model register fields with
registerfields.h helpers and provide migration support via vmstate.

Signed-off-by: Yucai Liu <1486344514@qq.com>
Message-id: 20260412110240.93116-2-yangyanglan718@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 MAINTAINERS                       |   2 +
 hw/display/Kconfig                |   4 +
 hw/display/imx6ul_lcdif.c         | 453 ++++++++++++++++++++++++++++++
 hw/display/meson.build            |   1 +
 include/hw/display/imx6ul_lcdif.h |  37 +++
 5 files changed, 497 insertions(+)
 create mode 100644 hw/display/imx6ul_lcdif.c
 create mode 100644 include/hw/display/imx6ul_lcdif.h

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org
 S: Odd Fixes
 F: hw/arm/mcimx6ul-evk.c
 F: hw/arm/fsl-imx6ul.c
+F: hw/display/imx6ul_lcdif.c
 F: hw/misc/imx6ul_ccm.c
 F: include/hw/arm/fsl-imx6ul.h
+F: include/hw/display/imx6ul_lcdif.h
 F: include/hw/misc/imx6ul_ccm.h
 F: docs/system/arm/mcimx6ul-evk.rst
 
diff --git a/hw/display/Kconfig b/hw/display/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/display/Kconfig
+++ b/hw/display/Kconfig
@@ -XXX,XX +XXX,XX @@ config PL110
     bool
     select FRAMEBUFFER
 
+config IMX6UL_LCDIF
+    bool
+    select FRAMEBUFFER
+
 config SII9022
     bool
     depends on I2C
diff --git a/hw/display/imx6ul_lcdif.c b/hw/display/imx6ul_lcdif.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/display/imx6ul_lcdif.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * i.MX6UL LCDIF controller
+ *
+ * Copyright (c) 2026 Yucai Liu <1486344514@qq.com>
+ */
+
+#include "qemu/osdep.h"
+#include "hw/display/imx6ul_lcdif.h"
+#include "hw/core/irq.h"
+#include "hw/core/registerfields.h"
+#include "hw/display/framebuffer.h"
+#include "migration/vmstate.h"
+#include "system/address-spaces.h"
+#include "qemu/module.h"
+#include "qemu/units.h"
+#include "ui/pixel_ops.h"
+
+#define LCDIF_MMIO_SIZE             (16 * KiB)
+#define LCDIF_RESET_CTRL1           0x000f0000
+
+REG32(CTRL, 0x00)
+    FIELD(CTRL, RUN, 0, 1)
+    FIELD(CTRL, WORD_LENGTH, 8, 2)
+REG32(CTRL1, 0x10)
+    FIELD(CTRL1, CUR_FRAME_DONE_IRQ, 9, 1)
+    FIELD(CTRL1, CUR_FRAME_DONE_IRQ_EN, 13, 1)
+    FIELD(CTRL1, BYTE_PACKING_FORMAT, 16, 4)
+REG32(V4_TRANSFER_COUNT, 0x30)
+    FIELD(V4_TRANSFER_COUNT, H_COUNT, 0, 16)
+    FIELD(V4_TRANSFER_COUNT, V_COUNT, 16, 16)
+REG32(V4_CUR_BUF, 0x40)
+REG32(V4_NEXT_BUF, 0x50)
+REG32(AS_NEXT_BUF, 0x230)
+
+#define REG_SET                     0x4
+#define REG_CLR                     0x8
+#define REG_TOG                     0xc
+
+#define CTRL_WORD_LENGTH_16         0
+#define CTRL_WORD_LENGTH_24         3
+
+#define FRAME_PERIOD_NS             (16 * 1000 * 1000ULL)
+
+enum IMX6ULLCDIFReg {
+    IMX6UL_LCDIF_REG_CTRL = A_CTRL >> 4,
+    IMX6UL_LCDIF_REG_CTRL1 = A_CTRL1 >> 4,
+    IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT = A_V4_TRANSFER_COUNT >> 4,
+    IMX6UL_LCDIF_REG_V4_CUR_BUF = A_V4_CUR_BUF >> 4,
+    IMX6UL_LCDIF_REG_V4_NEXT_BUF = A_V4_NEXT_BUF >> 4,
+    IMX6UL_LCDIF_REG_AS_NEXT_BUF = A_AS_NEXT_BUF >> 4,
+};
+
+static inline bool imx6ul_lcdif_reg_exists(hwaddr reg)
+{
+    return (reg >> 4) < IMX6UL_LCDIF_REGS_NUM;
+}
+
+static inline bool imx6ul_lcdif_reg_has_setclr(hwaddr reg)
+{
+    switch (reg) {
+    case A_CTRL:
+    case A_CTRL1:
+        return true;
+    default:
+        return false;
+    }
+}
+
+static inline bool imx6ul_lcdif_is_running(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL];
+
+    return FIELD_EX32(ctrl, CTRL, RUN);
+}
+
+static inline bool imx6ul_lcdif_frame_done_pending(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1];
+
+    return FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ);
+}
+
+static void imx6ul_lcdif_schedule_frame(IMX6ULLCDIFState *s)
+{
+    int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+
+    timer_mod(s->frame_timer, now + FRAME_PERIOD_NS);
+}
+
+static void imx6ul_lcdif_maybe_schedule_frame(IMX6ULLCDIFState *s)
+{
+    if (imx6ul_lcdif_is_running(s) && !imx6ul_lcdif_frame_done_pending(s)) {
+        imx6ul_lcdif_schedule_frame(s);
+    } else {
+        timer_del(s->frame_timer);
+    }
+}
+
+static void imx6ul_lcdif_update_irq(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1];
+    bool level = FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ_EN) &&
+                 FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ);
+
+    qemu_set_irq(s->irq, level);
+}
+
+static void imx6ul_lcdif_frame_done(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1];
+
+    ctrl1 = FIELD_DP32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ, 1);
+    s->regs[IMX6UL_LCDIF_REG_CTRL1] = ctrl1;
+    imx6ul_lcdif_update_irq(s);
+}
+
+static void imx6ul_lcdif_draw_line_rgb565(void *opaque, uint8_t *dst,
+                                          const uint8_t *src, int width,
+                                          int dststep)
+{
+    uint32_t *dst32 = (uint32_t *)dst;
+    int i;
+
+    for (i = 0; i < width; i++) {
+        uint16_t pixel = lduw_le_p(src);
+        uint8_t r = ((pixel >> 11) & 0x1f) << 3;
+        uint8_t g = ((pixel >> 5) & 0x3f) << 2;
+        uint8_t b = (pixel & 0x1f) << 3;
+
+        *dst32++ = rgb_to_pixel32(r, g, b);
+        src += 2;
+    }
+}
+
+static void imx6ul_lcdif_draw_line_xrgb8888(void *opaque, uint8_t *dst,
+                                            const uint8_t *src, int width,
+                                            int dststep)
+{
+    uint32_t *dst32 = (uint32_t *)dst;
+    int i;
+
+    for (i = 0; i < width; i++) {
+        uint32_t pixel = ldl_le_p(src);
+        uint8_t r = (pixel >> 16) & 0xff;
+        uint8_t g = (pixel >> 8) & 0xff;
+        uint8_t b = pixel & 0xff;
+
+        *dst32++ = rgb_to_pixel32(r, g, b);
+        src += 4;
+    }
+}
+
+static void imx6ul_lcdif_update_display(void *opaque)
+{
+    IMX6ULLCDIFState *s = opaque;
+    DisplaySurface *surface = qemu_console_surface(s->con);
+    uint32_t transfer_count = s->regs[IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT];
+    uint32_t width = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, H_COUNT);
+    uint32_t height = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, V_COUNT);
+    uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL];
+    uint32_t frame_base = s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF];
+    drawfn fn;
+    int first = 0;
+    int last = 0;
+    int src_width;
+
+    if (!imx6ul_lcdif_is_running(s) || width == 0 || height == 0) {
+        return;
+    }
+
+    switch (FIELD_EX32(ctrl, CTRL, WORD_LENGTH)) {
+    case CTRL_WORD_LENGTH_16:
+        s->src_bpp = 2;
+        fn = imx6ul_lcdif_draw_line_rgb565;
+        break;
+    case CTRL_WORD_LENGTH_24:
+        s->src_bpp = 4;
+        fn = imx6ul_lcdif_draw_line_xrgb8888;
+        break;
+    default:
+        return;
+    }
+
+    if (surface_width(surface) != width || surface_height(surface) != height) {
+        qemu_console_resize(s->con, width, height);
+        surface = qemu_console_surface(s->con);
+        s->invalidate = true;
+    }
+
+    src_width = width * s->src_bpp;
+    if (s->invalidate || s->fb_base != frame_base ||
+        s->src_width != src_width || s->rows != height) {
+        framebuffer_update_memory_section(&s->fbsection, get_system_memory(),
+                                          frame_base, height, src_width);
+        s->fb_base = frame_base;
+        s->src_width = src_width;
+        s->rows = height;
+    }
+
+    framebuffer_update_display(surface, &s->fbsection, width, height,
+                               src_width, surface_stride(surface), 0,
+                               s->invalidate, fn, s, &first, &last);
+    if (first >= 0) {
+        dpy_gfx_update(s->con, 0, first, width, last - first + 1);
+    }
+
+    s->invalidate = false;
+}
+
+static void imx6ul_lcdif_invalidate_display(void *opaque)
+{
+    IMX6ULLCDIFState *s = opaque;
+
+    s->invalidate = true;
+}
+
+static const GraphicHwOps imx6ul_lcdif_graphic_ops = {
+    .invalidate = imx6ul_lcdif_invalidate_display,
+    .gfx_update = imx6ul_lcdif_update_display,
+};
+
+static void imx6ul_lcdif_frame_timer_cb(void *opaque)
+{
+    IMX6ULLCDIFState *s = opaque;
+
+    if (!imx6ul_lcdif_is_running(s) || imx6ul_lcdif_frame_done_pending(s)) {
+        return;
+    }
+
+    imx6ul_lcdif_frame_done(s);
+}
+
+static uint64_t imx6ul_lcdif_read(void *opaque, hwaddr offset, unsigned size)
+{
+    IMX6ULLCDIFState *s = opaque;
+    hwaddr reg = offset & ~0xf;
+    uint32_t idx;
+
+    assert(size == 4);
+    assert(!(offset & 0x3));
+    assert(offset < LCDIF_MMIO_SIZE);
+
+    idx = reg >> 4;
+    if (idx >= ARRAY_SIZE(s->regs)) {
+        return 0;
+    }
+
+    return s->regs[idx];
+}
+
+static void imx6ul_lcdif_write(void *opaque, hwaddr offset,
+                               uint64_t value, unsigned size)
+{
+    IMX6ULLCDIFState *s = opaque;
+    hwaddr reg = offset & ~0xf;
+    uint32_t idx;
+    uint32_t oldv;
+
+    assert(size == 4);
+    assert(!(offset & 0x3));
+    assert(offset < LCDIF_MMIO_SIZE);
+
+    if (!imx6ul_lcdif_reg_exists(reg)) {
+        return;
+    }
+
+    idx = reg >> 4;
+    oldv = s->regs[idx];
+
+    switch (offset & 0xf) {
+    case 0:
+        s->regs[idx] = (uint32_t)value;
+        break;
+    case REG_SET:
+        if (!imx6ul_lcdif_reg_has_setclr(reg)) {
+            return;
+        }
+        s->regs[idx] = oldv | (uint32_t)value;
+        break;
+    case REG_CLR:
+        if (!imx6ul_lcdif_reg_has_setclr(reg)) {
+            return;
+        }
+        s->regs[idx] = oldv & ~(uint32_t)value;
+        break;
+    case REG_TOG:
+        if (!imx6ul_lcdif_reg_has_setclr(reg)) {
+            return;
+        }
+        s->regs[idx] = oldv ^ (uint32_t)value;
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    switch (reg) {
+    case A_CTRL:
+        if (!FIELD_EX32(oldv, CTRL, RUN) &&
+            FIELD_EX32(s->regs[idx], CTRL, RUN)) {
+            s->invalidate = true;
+            graphic_hw_invalidate(s->con);
+            imx6ul_lcdif_maybe_schedule_frame(s);
+            break;
+        }
+        if (FIELD_EX32(oldv, CTRL, RUN) &&
+            !FIELD_EX32(s->regs[idx], CTRL, RUN)) {
+            timer_del(s->frame_timer);
+        }
+        break;
+    case A_CTRL1:
+        if (FIELD_EX32(oldv, CTRL1, CUR_FRAME_DONE_IRQ) &&
+            !FIELD_EX32(s->regs[idx], CTRL1, CUR_FRAME_DONE_IRQ)) {
+            imx6ul_lcdif_maybe_schedule_frame(s);
+        }
+        break;
+    case A_V4_TRANSFER_COUNT:
+        s->invalidate = true;
+        graphic_hw_invalidate(s->con);
+        break;
+    case A_V4_CUR_BUF:
+        s->invalidate = true;
+        graphic_hw_invalidate(s->con);
+        break;
+    case A_V4_NEXT_BUF:
+        s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF] = s->regs[idx];
+        imx6ul_lcdif_frame_done(s);
+        s->invalidate = true;
+        graphic_hw_invalidate(s->con);
+        imx6ul_lcdif_maybe_schedule_frame(s);
+        return;
+    case A_AS_NEXT_BUF:
+        imx6ul_lcdif_frame_done(s);
+        imx6ul_lcdif_maybe_schedule_frame(s);
+        return;
+    default:
+        break;
+    }
+
+    imx6ul_lcdif_update_irq(s);
+}
+
+static const MemoryRegionOps imx6ul_lcdif_ops = {
+    .read = imx6ul_lcdif_read,
+    .write = imx6ul_lcdif_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+        .unaligned = false,
+    },
+};
+
+static void imx6ul_lcdif_reset(DeviceState *dev)
+{
+    IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev);
+
+    memset(s->regs, 0, sizeof(s->regs));
+    s->regs[IMX6UL_LCDIF_REG_CTRL1] = LCDIF_RESET_CTRL1;
+    s->fb_base = 0;
+    s->src_width = 0;
+    s->rows = 0;
+    s->src_bpp = 0;
+    s->invalidate = true;
+    timer_del(s->frame_timer);
+    imx6ul_lcdif_update_irq(s);
+}
+
+static int imx6ul_lcdif_post_load(void *opaque, int version_id)
+{
+    IMX6ULLCDIFState *s = opaque;
+
+    s->fb_base = 0;
+    s->src_width = 0;
+    s->rows = 0;
+    s->src_bpp = 0;
+    s->invalidate = true;
+
+    imx6ul_lcdif_update_irq(s);
+    if (imx6ul_lcdif_is_running(s) &&
+        !imx6ul_lcdif_frame_done_pending(s) &&
+        !timer_pending(s->frame_timer)) {
+        imx6ul_lcdif_schedule_frame(s);
+    }
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_imx6ul_lcdif = {
+    .name = TYPE_IMX6UL_LCDIF,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .post_load = imx6ul_lcdif_post_load,
+    .fields = (const VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, IMX6ULLCDIFState, IMX6UL_LCDIF_REGS_NUM),
+        VMSTATE_TIMER_PTR(frame_timer, IMX6ULLCDIFState),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static void imx6ul_lcdif_realize(DeviceState *dev, Error **errp)
+{
+    IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev);
+
+    s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
+                                  imx6ul_lcdif_frame_timer_cb, s);
+    s->invalidate = true;
+    memory_region_init_io(&s->iomem, OBJECT(dev), &imx6ul_lcdif_ops, s,
+                          TYPE_IMX6UL_LCDIF, LCDIF_MMIO_SIZE);
+    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
+    sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
+    s->con = graphic_console_init(dev, 0, &imx6ul_lcdif_graphic_ops, s);
+}
+
+static void imx6ul_lcdif_unrealize(DeviceState *dev)
+{
+    IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev);
+
+    timer_del(s->frame_timer);
+    timer_free(s->frame_timer);
+    s->frame_timer = NULL;
+
+    if (s->con) {
+        graphic_console_close(s->con);
+        s->con = NULL;
+    }
+}
+
+static void imx6ul_lcdif_class_init(ObjectClass *klass, const void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = imx6ul_lcdif_realize;
+    dc->unrealize = imx6ul_lcdif_unrealize;
+    dc->vmsd = &vmstate_imx6ul_lcdif;
+    device_class_set_legacy_reset(dc, imx6ul_lcdif_reset);
+    dc->desc = "i.MX6UL LCDIF";
+}
+
+static const TypeInfo imx6ul_lcdif_info = {
+    .name = TYPE_IMX6UL_LCDIF,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(IMX6ULLCDIFState),
+    .class_init = imx6ul_lcdif_class_init,
+};
+
+static void imx6ul_lcdif_register_types(void)
+{
+    type_register_static(&imx6ul_lcdif_info);
+}
+
+type_init(imx6ul_lcdif_register_types)
diff --git a/hw/display/meson.build b/hw/display/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/display/meson.build
+++ b/hw/display/meson.build
@@ -XXX,XX +XXX,XX @@ system_ss.add(when: ['CONFIG_VGA_CIRRUS', 'CONFIG_VGA_ISA'], if_true: files('cir
 system_ss.add(when: 'CONFIG_G364FB', if_true: files('g364fb.c'))
 system_ss.add(when: 'CONFIG_JAZZ_LED', if_true: files('jazz_led.c'))
 system_ss.add(when: 'CONFIG_PL110', if_true: files('pl110.c'))
+system_ss.add(when: 'CONFIG_IMX6UL_LCDIF', if_true: files('imx6ul_lcdif.c'))
 system_ss.add(when: 'CONFIG_SII9022', if_true: files('sii9022.c'))
 system_ss.add(when: 'CONFIG_SSD0303', if_true: files('ssd0303.c'))
 system_ss.add(when: 'CONFIG_SSD0323', if_true: files('ssd0323.c'))
diff --git a/include/hw/display/imx6ul_lcdif.h b/include/hw/display/imx6ul_lcdif.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/display/imx6ul_lcdif.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * i.MX6UL LCDIF controller
+ *
+ * Copyright (c) 2026 Yucai Liu <1486344514@qq.com>
+ */
+
+#ifndef IMX6UL_LCDIF_H
+#define IMX6UL_LCDIF_H
+
+#include "hw/core/sysbus.h"
+#include "qom/object.h"
+#include "qemu/timer.h"
+#include "ui/console.h"
+
+#define TYPE_IMX6UL_LCDIF "imx6ul-lcdif"
+#define IMX6UL_LCDIF_REGS_NUM ((0x230 >> 4) + 1)
+OBJECT_DECLARE_SIMPLE_TYPE(IMX6ULLCDIFState, IMX6UL_LCDIF)
+
+struct IMX6ULLCDIFState {
+    SysBusDevice parent_obj;
+
+    MemoryRegion iomem;
+    MemoryRegionSection fbsection;
+    qemu_irq irq;
+    QemuConsole *con;
+    QEMUTimer *frame_timer;
+    uint32_t fb_base;
+    uint32_t src_width;
+    uint32_t rows;
+    uint8_t src_bpp;
+    bool invalidate;
+    uint32_t regs[IMX6UL_LCDIF_REGS_NUM];
+};
+
+#endif /* IMX6UL_LCDIF_H */
-- 
2.43.0

From: Yucai Liu <1486344514@qq.com>

Instantiate LCDIF as a child object of the i.MX6UL SoC in init and
realize it in the SoC realize path before MMIO/IRQ hookup.

Also make FSL_IMX6UL select CONFIG_IMX6UL_LCDIF and map the LCDIF
region with a 16 KiB size to match the SoC memory map.

Signed-off-by: Yucai Liu <1486344514@qq.com>
Message-id: 20260412110240.93116-3-yangyanglan718@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx6ul.c         | 12 ++++++++++--
 include/hw/arm/fsl-imx6ul.h |  4 +++-
 3 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL
     imply I2C_DEVICES
     select A15MPCORE
     select IMX
+    select IMX6UL_LCDIF
     select IMX_FEC
     select IMX_I2C
     select IMX_USBPHY
diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx6ul.c
+++ b/hw/arm/fsl-imx6ul.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/osdep.h"
 #include "qapi/error.h"
 #include "hw/arm/fsl-imx6ul.h"
+#include "hw/display/imx6ul_lcdif.h"
 #include "hw/misc/unimp.h"
 #include "hw/usb/imx-usb-phy.h"
 #include "hw/core/boards.h"
@@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj)
         object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA);
     }
 
+    /*
+     * LCDIF
+     */
+    object_initialize_child(obj, "lcdif", &s->lcdif, TYPE_IMX6UL_LCDIF);
+
     /*
      * SDHCIs
      */
@@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp)
     /*
      * LCD
      */
-    create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR,
-                                FSL_IMX6UL_LCDIF_SIZE);
+    sysbus_realize(SYS_BUS_DEVICE(&s->lcdif), &error_abort);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->lcdif), 0, FSL_IMX6UL_LCDIF_ADDR);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->lcdif), 0,
+                       qdev_get_gpio_in(gic, FSL_IMX6UL_LCDIF_IRQ));
 
     /*
      * CSU
diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx6ul.h
+++ b/include/hw/arm/fsl-imx6ul.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/net/imx_fec.h"
 #include "hw/usb/chipidea.h"
 #include "hw/usb/imx-usb-phy.h"
+#include "hw/display/imx6ul_lcdif.h"
 #include "system/memory.h"
 #include "target/arm/cpu.h"
 #include "qom/object.h"
@@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState {
     IMX2WdtState       wdt[FSL_IMX6UL_NUM_WDTS];
     IMXUSBPHYState     usbphy[FSL_IMX6UL_NUM_USB_PHYS];
     ChipideaState      usb[FSL_IMX6UL_NUM_USBS];
+    IMX6ULLCDIFState   lcdif;
     MemoryRegion       rom;
     MemoryRegion       caam;
     MemoryRegion       ocram;
@@ -XXX,XX +XXX,XX @@ enum FslIMX6ULMemoryMap {
     FSL_IMX6UL_PXP_SIZE             = (16 * KiB),
 
     FSL_IMX6UL_LCDIF_ADDR           = 0x021C8000,
-    FSL_IMX6UL_LCDIF_SIZE           = 0x100,
+    FSL_IMX6UL_LCDIF_SIZE           = (16 * KiB),
 
     FSL_IMX6UL_CSI_ADDR             = 0x021C4000,
     FSL_IMX6UL_CSI_SIZE             = 0x100,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

We have a registerfields interface which we can use for defining
fields alongside helpers to access them. Define the basic syndrome
layout and convert the helpers that take the imm16 data directly.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-2-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 75 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 57 insertions(+), 18 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@
 #ifndef TARGET_ARM_SYNDROME_H
 #define TARGET_ARM_SYNDROME_H
 
-#include "qemu/bitops.h"
+#include "hw/core/registerfields.h"
 
 /* Valid Syndrome Register EC field values */
 enum arm_exception_class {
@@ -XXX,XX +XXX,XX @@ enum arm_exception_class {
     EC_AA64_BKPT              = 0x3c,
 };
 
+/* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */
+FIELD(SYNDROME, EC, 26, 6)
+FIELD(SYNDROME, IL, 25, 1)
+FIELD(SYNDROME, ISS, 0, 25)
+
 typedef enum {
     SME_ET_AccessTrap,
     SME_ET_Streaming,
@@ -XXX,XX +XXX,XX @@ typedef enum {
 
 static inline uint32_t syn_get_ec(uint32_t syn)
 {
-    return syn >> ARM_EL_EC_SHIFT;
+    return FIELD_EX32(syn, SYNDROME, EC);
 }
 
 static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec)
 {
-    return deposit32(syn, ARM_EL_EC_SHIFT, ARM_EL_EC_LENGTH, ec);
+    return FIELD_DP32(syn, SYNDROME, EC, ec);
 }
 
 /*
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec)
  */
 static inline uint32_t syn_uncategorized(void)
 {
-    return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_UNCATEGORIZED);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
+FIELD(ISS_IMM16, IMM16, 0, 16)
+
 static inline uint32_t syn_aa64_svc(uint32_t imm16)
 {
-    return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_SVC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa64_hvc(uint32_t imm16)
 {
-    return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_HVC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa64_smc(uint32_t imm16)
 {
-    return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_SMC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit)
 {
-    return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff)
-        | (is_16bit ? 0 : ARM_EL_IL);
+    uint32_t res = syn_set_ec(0, EC_AA32_SVC);
+    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_hvc(uint32_t imm16)
 {
-    return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA32_HVC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_smc(void)
 {
-    return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_AA32_SMC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_aa64_bkpt(uint32_t imm16)
 {
-    return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_BKPT);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit)
 {
-    return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff)
-        | (is_16bit ? 0 : ARM_EL_IL);
+    uint32_t res = syn_set_ec(0, EC_AA32_BKPT);
+    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2,
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit)
 
 static inline uint32_t syn_sve_access_trap(void)
 {
-    return (EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_SVEACCESSTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 /*
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
 
 static inline uint32_t syn_illegalstate(void)
 {
-    return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_ILLEGALSTATE);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_pcalignment(void)
 {
-    return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_PCALIGNMENT);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn)
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gcs_gcsstr(int ra, int rn)
 
 static inline uint32_t syn_serror(uint32_t extra)
 {
-    return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra;
+    uint32_t res = syn_set_ec(0, EC_SERROR);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, SYNDROME, ISS, extra);
+    return res;
 }
 
 static inline uint32_t syn_mop(bool is_set, bool is_setg, int options,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Migrate syn_aa64_sysregtrap and co-processor register trap syndromes
to the registerfields API. The co-processor syndromes are split
between single and duel register moves.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-3-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 124 ++++++++++++++++++++++++++++++++++--------
 1 file changed, 102 insertions(+), 22 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ enum arm_exception_class {
 
 /* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */
 FIELD(SYNDROME, EC, 26, 6)
-FIELD(SYNDROME, IL, 25, 1)
+FIELD(SYNDROME, IL, 25, 1) /* IL=1 for 32 bit instructions */
 FIELD(SYNDROME, ISS, 0, 25)
 
 typedef enum {
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_smc(uint32_t imm16)
 static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit)
 {
     uint32_t res = syn_set_ec(0, EC_AA32_SVC);
-    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
     res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
     return res;
 }
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_bkpt(uint32_t imm16)
 static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit)
 {
     uint32_t res = syn_set_ec(0, EC_AA32_BKPT);
-    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
     res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
     return res;
 }
 
+/*
+ * ISS encoding for an exception from MSR, MRS, or System instruction
+ * in AArch64 state.
+ */
+FIELD(SYSREG_ISS, ISREAD, 0, 1) /* Direction, 1 is read */
+FIELD(SYSREG_ISS, CRM, 1, 4)
+FIELD(SYSREG_ISS, RT, 5, 5)
+FIELD(SYSREG_ISS, CRN, 10, 4)
+FIELD(SYSREG_ISS, OP1, 14, 3)
+FIELD(SYSREG_ISS, OP2, 17, 3)
+FIELD(SYSREG_ISS, OP0, 20, 2)
+
 static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2,
                                            int crn, int crm, int rt,
                                            int isread)
 {
-    return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL
-        | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5)
-        | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_SYSTEMREGISTERTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, SYSREG_ISS, OP0, op0);
+    res = FIELD_DP32(res, SYSREG_ISS, OP2, op2);
+    res = FIELD_DP32(res, SYSREG_ISS, OP1, op1);
+    res = FIELD_DP32(res, SYSREG_ISS, CRN, crn);
+    res = FIELD_DP32(res, SYSREG_ISS, RT, rt);
+    res = FIELD_DP32(res, SYSREG_ISS, CRM, crm);
+    res = FIELD_DP32(res, SYSREG_ISS, ISREAD, isread);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from an MCR or MRC access
+ * (move to/from co-processor)
+ */
+FIELD(COPROC_ISS, ISREAD, 0, 1)
+FIELD(COPROC_ISS, CRM, 1, 4)
+FIELD(COPROC_ISS, RT, 5, 5)
+FIELD(COPROC_ISS, CRN, 10, 4)
+FIELD(COPROC_ISS, OP1, 14, 3)
+FIELD(COPROC_ISS, OP2, 17, 3)
+FIELD(COPROC_ISS, COND, 20, 4)
+FIELD(COPROC_ISS, CV, 24, 1)
+
 static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2,
                                         int crn, int crm, int rt, int isread,
                                         bool is_16bit)
 {
-    return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14)
-        | (crn << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP14RTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_ISS, OP2, opc2);
+    res = FIELD_DP32(res, COPROC_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_ISS, CRN, crn);
+    res = FIELD_DP32(res, COPROC_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread);
+
+    return res;
 }
 
 static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2,
                                         int crn, int crm, int rt, int isread,
                                         bool is_16bit)
 {
-    return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14)
-        | (crn << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP15RTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_ISS, OP2, opc2);
+    res = FIELD_DP32(res, COPROC_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_ISS, CRN, crn);
+    res = FIELD_DP32(res, COPROC_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from an MCRR or MRRC access
+ * (move to/from co-processor with 2 regs)
+ */
+FIELD(COPROC_R2_ISS, ISREAD, 0, 1)
+FIELD(COPROC_R2_ISS, CRM, 1, 4)
+FIELD(COPROC_R2_ISS, RT, 5, 5)
+FIELD(COPROC_R2_ISS, RT2, 10, 5)
+FIELD(COPROC_R2_ISS, OP1, 16, 4)
+FIELD(COPROC_R2_ISS, COND, 20, 4)
+FIELD(COPROC_R2_ISS, CV, 24, 1)
+
 static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm,
                                          int rt, int rt2, int isread,
                                          bool is_16bit)
 {
-    return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc1 << 16)
-        | (rt2 << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP14RRTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread);
+
+    return res;
 }
 
 static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm,
                                          int rt, int rt2, int isread,
                                          bool is_16bit)
 {
-    return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc1 << 16)
-        | (rt2 << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP15RRTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread);
+
+    return res;
 }
 
 static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

The syn_simd_access trap was never used so remove it. We should only
see the COPROC encoding on v7 architectures.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-4-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm,
     return res;
 }
 
+/*
+ * ISS encoding for an exception from an access to a register of
+ * instruction resulting from the FPEN or TFP traps.
+ */
+FIELD(FP_ISS, COPROC, 0, 4) /* ARMv7 only */
+FIELD(FP_ISS, COND, 20, 4)
+FIELD(FP_ISS, CV, 24, 1)
+
 static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit,
                                           int coproc)
 {
     /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 */
-    return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | coproc;
-}
+    uint32_t res = syn_set_ec(0, EC_ADVSIMDFPACCESSTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
 
-static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit)
-{
-    /* AArch32 SIMD trap: TA == 1 coproc == 0 */
-    return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (1 << 5);
+    res = FIELD_DP32(res, FP_ISS, CV, cv);
+    res = FIELD_DP32(res, FP_ISS, COND, cond);
+    res = FIELD_DP32(res, FP_ISS, COPROC, coproc);
+
+    return res;
 }
 
 static inline uint32_t syn_sve_access_trap(void)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

For simplicity keep the OP as a two bit field rather than the two
interlinked fields in the docs (ERET/ERETA).

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-5-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_sve_access_trap(void)
 }
 
 /*
+ * ISS encoding for an exception from an ERET, ERETAA or ERETAB
+ * instructions.
+ *
  * eret_op is bits [1:0] of the ERET instruction, so:
  * 0 for ERET, 2 for ERETAA, 3 for ERETAB.
  */
+FIELD(ERET_ISS, OP, 0, 2)
+
 static inline uint32_t syn_erettrap(int eret_op)
 {
-    return (EC_ERETTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | eret_op;
+    uint32_t res = syn_set_ec(0, EC_ERETTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ERET_ISS, OP, eret_op);
+
+    return res;
 }
 
 static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-6-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_erettrap(int eret_op)
     return res;
 }
 
+/*
+ * ISS encoding for an exception due to SME functionality
+ */
+FIELD(SME_ISS, SMTC, 0, 2)
+
 static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit)
 {
-    return (EC_SMETRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL) | etype;
+    uint32_t res = syn_set_ec(0, EC_SMETRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+    res = FIELD_DP32(res, SME_ISS, SMTC, etype);
+
+    return res;
 }
 
 static inline uint32_t syn_pacfail(bool data, int keynumber)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

syn_pactrap is fairly simple as the ISS is all RES0.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-7-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit)
     return res;
 }
 
+/*
+ * ISS encoding for a PAC Fail exceptions
+ */
+FIELD(PACFAIL_ISS, BnA, 0, 1) /* B key or A key */
+FIELD(PACFAIL_ISS, DnI, 1, 1) /* Data or Instruction */
+
 static inline uint32_t syn_pacfail(bool data, int keynumber)
 {
-    int error_code = (data << 1) | keynumber;
-    return (EC_PACFAIL << ARM_EL_EC_SHIFT) | ARM_EL_IL | error_code;
+    uint32_t res = syn_set_ec(0, EC_PACFAIL);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, PACFAIL_ISS, DnI, data);
+    res = FIELD_DP32(res, PACFAIL_ISS, BnA, keynumber);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a trapped Pointer
+ * Authentication instruction is RES0
+ */
 static inline uint32_t syn_pactrap(void)
 {
-    return (EC_PACTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_PACTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_btitrap(int btype)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-8-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pactrap(void)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from a Branch Target Identification
+ * instruction.
+ */
+FIELD(BTI_ISS, BTYPE, 0, 2)
+
 static inline uint32_t syn_btitrap(int btype)
 {
-    return (EC_BTITRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | btype;
+    uint32_t res = syn_set_ec(0, EC_BTITRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, BTI_ISS, BTYPE, btype);
+    return res;
 }
 
 static inline uint32_t syn_bxjtrap(int cv, int cond, int rm)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

This is an Armv7 specific syndrome for chips with Jazelle
functionality.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-9-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_btitrap(int btype)
     return res;
 }
 
+/*
+ * ISS encoding for trapped BXJ execution
+ *
+ * This is an Armv7 encoding.
+ */
+FIELD(BXJ_ISS, RM, 0, 4)
+/* bits 4:19 are Reserved, UNK/SBZP */
+FIELD(BXJ_ISS, COND, 20, 4)
+FIELD(BXJ_ISS, CV, 24, 1)
+
 static inline uint32_t syn_bxjtrap(int cv, int cond, int rm)
 {
-    return (EC_BXJTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-        (cv << 24) | (cond << 20) | rm;
+    uint32_t res = syn_set_ec(0, EC_BXJTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, BXJ_ISS, CV, cv);
+    res = FIELD_DP32(res, BXJ_ISS, COND, cond);
+    res = FIELD_DP32(res, BXJ_ISS, RM, rm);
+
+    return res;
 }
 
 static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-10-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_bxjtrap(int cv, int cond, int rm)
     return res;
 }
 
+/*
+ * ISS encoding for a Granule Protection Check exception
+ *
+ * These are only reported to EL3
+ */
+FIELD(GPC_ISS, xFSC, 0, 6)
+FIELD(GPC_ISS, WnR, 6, 1) /* Write not Read */
+FIELD(GPC_ISS, S1PTW, 7, 1)
+FIELD(GPC_ISS, CM, 8, 1)
+FIELD(GPC_ISS, VNCR, 13, 1)
+FIELD(GPC_ISS, GPCSC, 14, 6)
+FIELD(GPC_ISS, InD, 20, 1) /* Instruction not Data access */
+FIELD(GPC_ISS, S2PTW, 21, 1)
+
 static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr,
                                int cm, int s1ptw, int wnr, int fsc)
 {
-    return (EC_GPC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (s2ptw << 21)
-        | (ind << 20) | (gpcsc << 14) | (vncr << 13) | (cm << 8)
-        | (s1ptw << 7) | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_GPC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GPC_ISS, S2PTW, s2ptw);
+    res = FIELD_DP32(res, GPC_ISS, InD, ind);
+    res = FIELD_DP32(res, GPC_ISS, GPCSC, gpcsc);
+    res = FIELD_DP32(res, GPC_ISS, VNCR, vncr);
+    res = FIELD_DP32(res, GPC_ISS, CM, cm);
+    res = FIELD_DP32(res, GPC_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, GPC_ISS, WnR, wnr);
+    res = FIELD_DP32(res, GPC_ISS, xFSC, fsc);
+
+    return res;
 }
 
 static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Migrate syn_insn_abort and syn_data_abort_* to the registerfields API.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260422125250.1303100-11-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 87 ++++++++++++++++++++++++++++++++++++-------
 1 file changed, 74 insertions(+), 13 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr,
     return res;
 }
 
+/*
+ * ISS encoding for an exception from an Instruction Abort
+ *
+ * (aka instruction abort)
+ */
+FIELD(IABORT_ISS, IFSC, 0, 6)
+FIELD(IABORT_ISS, S1PTW, 7, 1)
+FIELD(IABORT_ISS, EA, 9, 1)
+FIELD(IABORT_ISS, FnV, 10, 1) /* FAR not Valid */
+FIELD(IABORT_ISS, SET, 11, 2)
+FIELD(IABORT_ISS, PFV, 14, 1)
+FIELD(IABORT_ISS, TopLevel, 21, 1) /* FEAT_THE */
+
 static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc)
 {
-    return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc;
+    uint32_t res = syn_set_ec(0, EC_INSNABORT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, IABORT_ISS, EA, ea);
+    res = FIELD_DP32(res, IABORT_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, IABORT_ISS, IFSC, fsc);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a Data Abort
+ */
+FIELD(DABORT_ISS, DFSC, 0, 6)
+FIELD(DABORT_ISS, WNR, 6, 1)
+FIELD(DABORT_ISS, S1PTW, 7, 1)
+FIELD(DABORT_ISS, CM, 8, 1)
+FIELD(DABORT_ISS, EA, 9, 1)
+FIELD(DABORT_ISS, FnV, 10, 1)
+FIELD(DABORT_ISS, LST, 11, 2)
+FIELD(DABORT_ISS, VNCR, 13, 1)
+FIELD(DABORT_ISS, AR, 14, 1)
+FIELD(DABORT_ISS, SF, 15, 1)
+FIELD(DABORT_ISS, SRT, 16, 5)
+FIELD(DABORT_ISS, SSE, 21, 1)
+FIELD(DABORT_ISS, SAS, 22, 2)
+FIELD(DABORT_ISS, ISV, 24, 1)
+
 static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv,
                                              int ea, int cm, int s1ptw,
                                              int wnr, int fsc)
 {
-    return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-           | ARM_EL_IL
-           | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7)
-           | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, DABORT_ISS, FnV, fnv);
+    res = FIELD_DP32(res, DABORT_ISS, EA, ea);
+    res = FIELD_DP32(res, DABORT_ISS, CM, cm);
+    res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, DABORT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc);
+
+    return res;
 }
 
 static inline uint32_t syn_data_abort_with_iss(int same_el,
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el,
                                                int wnr, int fsc,
                                                bool is_16bit)
 {
-    return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-           | (is_16bit ? 0 : ARM_EL_IL)
-           | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16)
-           | (sf << 15) | (ar << 14)
-           | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, DABORT_ISS, ISV, 1);
+    res = FIELD_DP32(res, DABORT_ISS, SAS, sas);
+    res = FIELD_DP32(res, DABORT_ISS, SSE, sse);
+    res = FIELD_DP32(res, DABORT_ISS, SRT, srt);
+    res = FIELD_DP32(res, DABORT_ISS, SF, sf);
+    res = FIELD_DP32(res, DABORT_ISS, AR, ar);
+    res = FIELD_DP32(res, DABORT_ISS, EA, ea);
+    res = FIELD_DP32(res, DABORT_ISS, CM, cm);
+    res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, DABORT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc);
+
+    return res;
 }
 
 /*
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el,
  */
 static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc)
 {
-    return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (1 << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | ARM_EL_VNCR | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_DATAABORT_SAME_EL);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, DABORT_ISS, VNCR, 1);
+    res = FIELD_DP32(res, DABORT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc);
+
+    return res;
 }
 
 static inline uint32_t syn_swstep(int same_el, int isv, int ex)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Migrate syn_swstep, syn_watchpoint and syn_breakpoint to the
registerfields API.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-12-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 54 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 48 insertions(+), 6 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from a Software Step exception.
+ */
+FIELD(SOFTSTEP_ISS, IFSC, 0, 6)
+FIELD(SOFTSTEP_ISS, EX, 6, 1)
+FIELD(SOFTSTEP_ISS, ISV, 24, 1)
+
 static inline uint32_t syn_swstep(int same_el, int isv, int ex)
 {
-    return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22;
+    uint32_t res = syn_set_ec(0, EC_SOFTWARESTEP + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, SOFTSTEP_ISS, ISV, isv);
+    res = FIELD_DP32(res, SOFTSTEP_ISS, EX, ex);
+    res = FIELD_DP32(res, SOFTSTEP_ISS, IFSC, 0x22);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a Watchpoint exception
+ */
+FIELD(WATCHPOINT_ISS, DFSC, 0, 6)
+FIELD(WATCHPOINT_ISS, WNR, 6, 1)
+FIELD(WATCHPOINT_ISS, CM, 8, 1)
+FIELD(WATCHPOINT_ISS, FnV, 10, 1)
+FIELD(WATCHPOINT_ISS, VNCR, 13, 1) /* FEAT_NV2 */
+FIELD(WATCHPOINT_ISS, FnP, 15, 1)
+FIELD(WATCHPOINT_ISS, WPF, 16, 1)
+/* bellow mandatory from FEAT_Debugv8p9 */
+FIELD(WATCHPOINT_ISS, WPTV, 17, 1) /* FEAT_Debugv8p2 - WPT valid */
+FIELD(WATCHPOINT_ISS, WPT, 18, 6) /* FEAT_Debugv8p2 - missing WP number */
+
 static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr)
 {
-    return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22;
+    uint32_t res = syn_set_ec(0, EC_WATCHPOINT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, WATCHPOINT_ISS, CM, cm);
+    res = FIELD_DP32(res, WATCHPOINT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, WATCHPOINT_ISS, DFSC, 0x22);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a Breakpoint or a Vector Catch
+ * debug exception.
+ */
+FIELD(BREAKPOINT_ISS, IFSC, 0, 6)
+
 static inline uint32_t syn_breakpoint(int same_el)
 {
-    return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | 0x22;
+    uint32_t res = syn_set_ec(0, EC_BREAKPOINT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, BREAKPOINT_ISS, IFSC, 0x22);
+
+    return res;
 }
 
 static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

This will help later when we expand the fields we report.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-13-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_breakpoint(int same_el)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from a WF* instruction
+ */
+FIELD(WFX_ISS, TI, 0, 2)
+FIELD(WFX_ISS, RV, 2, 1)
+FIELD(WFX_ISS, RN, 5, 5)
+FIELD(WFX_ISS, COND, 20, 4)
+FIELD(WFX_ISS, CV, 24, 1)
+
 static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
 {
-    return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) |
-           (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) |
-           (cv << 24) | (cond << 20) | ti;
+    uint32_t res = syn_set_ec(0, EC_WFX_TRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, WFX_ISS, CV, cv);
+    res = FIELD_DP32(res, WFX_ISS, COND, cond);
+    res = FIELD_DP32(res, WFX_ISS, TI, ti);
+
+    return res;
 }
 
 static inline uint32_t syn_illegalstate(void)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Tweak arg names to make it clear raddr is the data address register
number.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-14-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 39 +++++++++++++++++++++++++++++++++------
 1 file changed, 33 insertions(+), 6 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void)
     return res;
 }
 
+/*
+ * ISS encoding for a GCS exception
+ *
+ * Field validity depends on EXTYPE
+ */
+FIELD(GCS_ISS, IT, 0, 5)
+FIELD(GCS_ISS, RN, 5, 5) /* only for non EXLOCK exceptions */
+FIELD(GCS_ISS, RADDR, 10, 5) /* only for GCSSTR/GCSSTTR traps */
+FIELD(GCS_ISS, EXTYPE, 20, 4)
+
 static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn)
 {
-    return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-            (GCS_ET_DataCheck << 20) | (rn << 5) | it);
+    uint32_t res = syn_set_ec(0, EC_GCS);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_DataCheck);
+    res = FIELD_DP32(res, GCS_ISS, RN, rn);
+    res = FIELD_DP32(res, GCS_ISS, IT, it);
+
+    return res;
 }
 
 static inline uint32_t syn_gcs_exlock(void)
 {
-    return (EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | (GCS_ET_EXLOCK << 20);
+    uint32_t res = syn_set_ec(0, EC_GCS);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_EXLOCK);
+
+    return res;
 }
 
-static inline uint32_t syn_gcs_gcsstr(int ra, int rn)
+static inline uint32_t syn_gcs_gcsstr(int raddr, int rn)
 {
-    return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-            (GCS_ET_GCSSTR_GCSSTTR << 20) | (ra << 10) | (rn << 5));
+    uint32_t res = syn_set_ec(0, EC_GCS);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_GCSSTR_GCSSTTR);
+    res = FIELD_DP32(res, GCS_ISS, RADDR, raddr);
+    res = FIELD_DP32(res, GCS_ISS, RN, rn);
+
+    return res;
 }
 
 static inline uint32_t syn_serror(uint32_t extra)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-15-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 33 +++++++++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 4 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_serror(uint32_t extra)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from the Memory Copy and Memory Set
+ * instructions.
+ */
+FIELD(MOP_ISS, SIZEREG, 0, 5)
+FIELD(MOP_ISS, SRCREG, 5, 5)
+FIELD(MOP_ISS, DESTREG, 10, 5)
+FIELD(MOP_ISS, FORMATOPT, 16, 2)
+FIELD(MOP_ISS, OPT_A, 16, 1)
+FIELD(MOP_ISS, WRONG_OPT, 17, 1)
+FIELD(MOP_ISS, EPILOGUE, 18, 1)
+FIELD(MOP_ISS, OPTIONS, 19, 4)
+FIELD(MOP_ISS, IS_SETG, 23, 1)
+FIELD(MOP_ISS, MEMINST, 24, 1)
+
 static inline uint32_t syn_mop(bool is_set, bool is_setg, int options,
                                bool epilogue, bool wrong_option, bool option_a,
                                int destreg, int srcreg, int sizereg)
 {
-    return (EC_MOP << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-        (is_set << 24) | (is_setg << 23) | (options << 19) |
-        (epilogue << 18) | (wrong_option << 17) | (option_a << 16) |
-        (destreg << 10) | (srcreg << 5) | sizereg;
+    uint32_t res = syn_set_ec(0, EC_MOP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, MOP_ISS, MEMINST, is_set);
+    res = FIELD_DP32(res, MOP_ISS, IS_SETG, is_setg);
+    res = FIELD_DP32(res, MOP_ISS, OPTIONS, options);
+    res = FIELD_DP32(res, MOP_ISS, EPILOGUE, epilogue);
+    res = FIELD_DP32(res, MOP_ISS, WRONG_OPT, wrong_option);
+    res = FIELD_DP32(res, MOP_ISS, OPT_A, option_a);
+    res = FIELD_DP32(res, MOP_ISS, DESTREG, destreg);
+    res = FIELD_DP32(res, MOP_ISS, SRCREG, srcreg);
+    res = FIELD_DP32(res, MOP_ISS, SIZEREG, sizereg);
+
+    return res;
 }
 
 
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

It shares the same COPROC_ISS encoding as the other CP traps although
not all the fields are used.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-16-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h       | 16 ++++++++++++++++
 target/arm/tcg/vfp_helper.c |  5 +----
 2 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ FIELD(COPROC_ISS, OP2, 17, 3)
 FIELD(COPROC_ISS, COND, 20, 4)
 FIELD(COPROC_ISS, CV, 24, 1)
 
+static inline uint32_t syn_cp10_rt_trap(int cv, int cond, int opc1,
+                                        int crn, int rt, int isread)
+{
+    uint32_t res = syn_set_ec(0, EC_FPIDTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, COPROC_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_ISS, CRN, crn);
+    res = FIELD_DP32(res, COPROC_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread);
+
+    return res;
+}
+
 static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2,
                                         int crn, int crm, int rt, int isread,
                                         bool is_16bit)
diff --git a/target/arm/tcg/vfp_helper.c b/target/arm/tcg/vfp_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/vfp_helper.c
+++ b/target/arm/tcg/vfp_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(check_hcr_el2_trap)(CPUARMState *env, uint32_t rt, uint32_t reg)
         g_assert_not_reached();
     }
 
-    syndrome = ((EC_FPIDTRAP << ARM_EL_EC_SHIFT)
-                | ARM_EL_IL
-                | (1 << 24) | (0xe << 20) | (7 << 14)
-                | (reg << 10) | (rt << 5) | 1);
+    syndrome = syn_cp10_rt_trap(1, 0xe, 7, reg, rt, 1);
 
     raise_exception(env, EXCP_HYP_TRAP, syndrome, 2);
 }
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

One more step towards dropping the old #defines.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-17-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs)
              */
             if (cs->exception_index == EXCP_PREFETCH_ABORT ||
                 (cs->exception_index == EXCP_DATA_ABORT &&
-                 !(env->exception.syndrome & ARM_EL_ISV)) ||
+                 !FIELD_EX32(env->exception.syndrome, SYNDROME, IL)) ||
                 syn_get_ec(env->exception.syndrome) == EC_UNCATEGORIZED) {
-                env->exception.syndrome &= ~ARM_EL_IL;
+                env->exception.syndrome = FIELD_DP32(env->exception.syndrome, SYNDROME, IL, 0);
             }
         }
         env->cp15.esr_el[2] = env->exception.syndrome;
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

This removes the last use of ARM_EL_EC_SHIFT.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-18-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h  | 1 -
 target/arm/tcg/debug.c | 2 +-
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ typedef enum {
 } GCSInstructionType;
 
 #define ARM_EL_EC_LENGTH 6
-#define ARM_EL_EC_SHIFT 26
 #define ARM_EL_IL_SHIFT 25
 #define ARM_EL_ISV_SHIFT 24
 #define ARM_EL_IL (1 << ARM_EL_IL_SHIFT)
diff --git a/target/arm/tcg/debug.c b/target/arm/tcg/debug.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/debug.c
+++ b/target/arm/tcg/debug.c
@@ -XXX,XX +XXX,XX @@ raise_exception_debug(CPUARMState *env, uint32_t excp, uint32_t syndrome)
      * Similarly for watchpoint and breakpoint matches.
      */
     assert(debug_el >= cur_el);
-    syndrome |= (debug_el == cur_el) << ARM_EL_EC_SHIFT;
+    syndrome |= (debug_el == cur_el) << R_SYNDROME_EC_SHIFT;
     raise_exception(env, excp, syndrome, debug_el);
 }
 
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Rather than open coding a bunch of shifts and masks we can use the
syndrome definitions. While we are at it assert it really is a
EC_DATAABORT.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-19-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/whpx/whpx-all.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/target/arm/whpx/whpx-all.c b/target/arm/whpx/whpx-all.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/whpx/whpx-all.c
+++ b/target/arm/whpx/whpx-all.c
@@ -XXX,XX +XXX,XX @@ static int whpx_handle_mmio(CPUState *cpu, WHV_MEMORY_ACCESS_CONTEXT *ctx)
 {
     uint64_t syndrome = ctx->Syndrome;
 
-    bool isv = syndrome & ARM_EL_ISV;
-    bool iswrite = (syndrome >> 6) & 1;
-    bool sse = (syndrome >> 21) & 1;
-    uint32_t sas = (syndrome >> 22) & 3;
+    bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV);
+    bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR);
+    bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE);
+    uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS);
     uint32_t len = 1 << sas;
-    uint32_t srt = (syndrome >> 16) & 0x1f;
-    uint32_t cm = (syndrome >> 8) & 0x1;
+    uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT);
+    uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM);
     uint64_t val = 0;
 
+    assert(syn_get_ec(syndrome) == EC_DATAABORT);
     assert(!cm);
     assert(isv);
 
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Rather than open coding a bunch of shifts and masks we can use the
syndrome definitions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260422125250.1303100-20-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/hvf/hvf.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/hvf/hvf.c
+++ b/target/arm/hvf/hvf.c
@@ -XXX,XX +XXX,XX @@ static int hvf_handle_exception(CPUState *cpu, hv_vcpu_exit_exception_t *excp)
         break;
     }
     case EC_DATAABORT: {
-        bool isv = syndrome & ARM_EL_ISV;
-        bool iswrite = (syndrome >> 6) & 1;
-        bool s1ptw = (syndrome >> 7) & 1;
-        bool sse = (syndrome >> 21) & 1;
-        uint32_t sas = (syndrome >> 22) & 3;
+        bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV);
+        bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR);
+        bool s1ptw = FIELD_EX32(syndrome, DABORT_ISS, S1PTW);
+        bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE);
+        uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS);
         uint32_t len = 1 << sas;
-        uint32_t srt = (syndrome >> 16) & 0x1f;
-        uint32_t cm = (syndrome >> 8) & 0x1;
+        uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT);
+        uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM);
         uint64_t val = 0;
         uint64_t ipa = excp->physical_address;
         AddressSpace *as = cpu_get_address_space(cpu, ARMASIdx_NS);
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

One more step to removing the old defines.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-21-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/tlb_helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

From: Alex Bennée <alex.bennee@linaro.org>

These are only valid for data abort syndromes.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-22-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/tlb_helper.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/tlb_helper.c
+++ b/target/arm/tcg/tlb_helper.c
@@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn,
      * ST64BV, or ST64BV0 insns report syndrome info even for stage-1
      * faults and regardless of the target EL.
      */
-    if (template_syn & ARM_EL_VNCR) {
+    if (FIELD_EX32(template_syn, DABORT_ISS, VNCR)) {
         /*
          * FEAT_NV2 faults on accesses via VNCR_EL2 are a special case:
          * they are always reported as "same EL", even though we are going
@@ -XXX,XX +XXX,XX @@ void arm_deliver_fault(ARMCPU *cpu, vaddr addr,
      * because we masked that out in disas_set_insn_syndrome())
      */
     bool is_vncr = (access_type != MMU_INST_FETCH) &&
-        (env->exception.syndrome & ARM_EL_VNCR);
+        FIELD_EX32(env->exception.syndrome, DABORT_ISS, VNCR);
 
     if (is_vncr) {
         /* FEAT_NV2 faults on accesses via VNCR_EL2 go to EL2 */
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Now everything is defined with registerfields we can drop the old
defines.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-23-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ typedef enum {
     GCS_IT_GCSPOPX = 9,
 } GCSInstructionType;
 
-#define ARM_EL_EC_LENGTH 6
-#define ARM_EL_IL_SHIFT 25
-#define ARM_EL_ISV_SHIFT 24
-#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT)
-#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT)
-
-/* In the Data Abort syndrome */
-#define ARM_EL_VNCR (1 << 13)
-
 static inline uint32_t syn_get_ec(uint32_t syn)
 {
     return FIELD_EX32(syn, SYNDROME, EC);
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Pass the register number (rd) to the wfit helper and report it in the
syndrome ISS.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-24-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h          | 11 ++++++++++-
 target/arm/tcg/helper-defs.h   |  2 +-
 target/arm/tcg/op_helper.c     |  7 ++++---
 target/arm/tcg/translate-a64.c |  2 +-
 4 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ FIELD(WFX_ISS, RN, 5, 5)
 FIELD(WFX_ISS, COND, 20, 4)
 FIELD(WFX_ISS, CV, 24, 1)
 
-static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
+typedef enum {
+    WFI = 0b00,
+    WFE = 0b01,
+    WFIT = 0b10,
+    WFET = 0xb11
+} wfx_ti;
+
+static inline uint32_t syn_wfx(int cv, int cond, int rn, bool rv, wfx_ti ti, bool is_16bit)
 {
     uint32_t res = syn_set_ec(0, EC_WFX_TRAP);
     res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
     res = FIELD_DP32(res, WFX_ISS, CV, cv);
     res = FIELD_DP32(res, WFX_ISS, COND, cond);
     res = FIELD_DP32(res, WFX_ISS, TI, ti);
+    res = FIELD_DP32(res, WFX_ISS, RN, rn);
+    res = FIELD_DP32(res, WFX_ISS, RV, rv);
 
     return res;
 }
diff --git a/target/arm/tcg/helper-defs.h b/target/arm/tcg/helper-defs.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper-defs.h
+++ b/target/arm/tcg/helper-defs.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(exception_pc_alignment, noreturn, env, vaddr)
 DEF_HELPER_1(setend, void, env)
 DEF_HELPER_2(wfi, void, env, i32)
 DEF_HELPER_1(wfe, void, env)
-DEF_HELPER_2(wfit, void, env, i64)
+DEF_HELPER_2(wfit, void, env, i32)
 DEF_HELPER_1(yield, void, env)
 DEF_HELPER_1(pre_hvc, void, env)
 DEF_HELPER_2(pre_smc, void, env, i32)
diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/op_helper.c
+++ b/target/arm/tcg/op_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len)
             env->regs[15] -= insn_len;
         }
 
-        raise_exception(env, excp, syn_wfx(1, 0xe, 0, insn_len == 2),
+        raise_exception(env, excp, syn_wfx(1, 0xe, 0, false, WFI, insn_len == 2),
                         target_el);
     }
 
@@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len)
 #endif
 }
 
-void HELPER(wfit)(CPUARMState *env, uint64_t timeout)
+void HELPER(wfit)(CPUARMState *env, uint32_t rd)
 {
 #ifdef CONFIG_USER_ONLY
     /*
@@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout)
     int target_el = check_wfx_trap(env, false, &excp);
     /* The WFIT should time out when CNTVCT_EL0 >= the specified value. */
     uint64_t cntval = gt_get_countervalue(env);
+    uint64_t timeout = env->xregs[rd];
     /*
      * We want the value that we would get if we read CNTVCT_EL0 from
      * the current exception level, so the direct_access offset, not
@@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout)
 
     if (target_el) {
         env->pc -= 4;
-        raise_exception(env, excp, syn_wfx(1, 0xe, 2, false), target_el);
+        raise_exception(env, excp, syn_wfx(1, 0xe, rd, true, WFIT, false), target_el);
     }
 
     if (uadd64_overflow(timeout, offset, &nexttick)) {
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static bool trans_WFIT(DisasContext *s, arg_WFIT *a)
     }
 
     gen_a64_update_pc(s, 4);
-    gen_helper_wfit(tcg_env, cpu_reg(s, a->rd));
+    gen_helper_wfit(tcg_env, tcg_constant_i32(a->rd));
     /* Go back to the main loop to check for interrupts */
     s->base.is_jmp = DISAS_EXIT;
     return true;
-- 
2.43.0