First pullreq of the 3.1 release cycle, with lots of Arm related patches accumulated during freeze. Most notable here is Luc's GICv2 virtualization support and my execute-from-MMIO patches. I stopped looking at my to-review queue towards the end of freeze, since 45 patches is already pushing what I consider a reasonable sized pullreq; once this goes into master I'll start working through it again. thanks -- PMM The following changes since commit 38441756b70eec5807b5f60dad11a93a91199866: Update version for v3.0.0 release (2018-08-14 16:38:43 +0100) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180814 for you to fetch changes up to 054e7adf4e64e4acb3b033348ebf7cc871baa34f: target/arm: Fix typo in helper_sve_movz_d (2018-08-14 17:17:22 +0100) ---------------------------------------------------------------- target-arm queue: * Implement more of ARMv6-M support * Support direct execution from non-RAM regions; use this to implmeent execution from small (<1K) MPU regions * GICv2: implement the virtualization extensions * support a virtualization-capable GICv2 in the virt and xlnx-zynqmp boards * arm: Fix return code of arm_load_elf() so we can detect failure to load the file correctly * Implement HCR_EL2.TGE ("trap general exceptions") bit * Implement tailchaining for M profile cores * Fix bugs in SVE compare, saturating add/sub, WHILE, MOVZ ---------------------------------------------------------------- Adam Lackorzynski (1): arm: Fix return code of arm_load_elf Julia Suvorova (4): target/arm: Forbid unprivileged mode for M Baseline nvic: Handle ARMv6-M SCS reserved registers arm: Add ARMv6-M programmer's model support nvic: Change NVIC to support ARMv6-M Luc Michel (20): intc/arm_gic: Refactor operations on the distributor intc/arm_gic: Implement GICD_ISACTIVERn and GICD_ICACTIVERn registers intc/arm_gic: Remove some dead code and put some functions static vmstate.h: Provide VMSTATE_UINT16_SUB_ARRAY intc/arm_gic: Add the virtualization extensions to the GIC state intc/arm_gic: Add virtual interface register definitions intc/arm_gic: Add virtualization extensions helper macros and functions intc/arm_gic: Refactor secure/ns access check in the CPU interface intc/arm_gic: Add virtualization enabled IRQ helper functions intc/arm_gic: Implement virtualization extensions in gic_(activate_irq|drop_prio) intc/arm_gic: Implement virtualization extensions in gic_acknowledge_irq intc/arm_gic: Implement virtualization extensions in gic_(deactivate|complete_irq) intc/arm_gic: Implement virtualization extensions in gic_cpu_(read|write) intc/arm_gic: Wire the vCPU interface intc/arm_gic: Implement the virtual interface registers intc/arm_gic: Implement gic_update_virt() function intc/arm_gic: Implement maintenance interrupt generation intc/arm_gic: Improve traces xlnx-zynqmp: Improve GIC wiring and MMIO mapping arm/virt: Add support for GICv2 virtualization extensions Peter Maydell (16): accel/tcg: Pass read access type through to io_readx() accel/tcg: Handle get_page_addr_code() returning -1 in hashtable lookups accel/tcg: Handle get_page_addr_code() returning -1 in tb_check_watchpoint() accel/tcg: tb_gen_code(): Create single-insn TB for execution from non-RAM accel/tcg: Return -1 for execution from MMIO regions in get_page_addr_code() target/arm: Allow execution from small regions accel/tcg: Check whether TLB entry is RAM consistently with how we set it up target/arm: Mask virtual interrupts if HCR_EL2.TGE is set target/arm: Honour HCR_EL2.TGE and MDCR_EL2.TDE in debug register access checks target/arm: Honour HCR_EL2.TGE when raising synchronous exceptions target/arm: Provide accessor functions for HCR_EL2.{IMO, FMO, AMO} target/arm: Treat SCTLR_EL1.M as if it were zero when HCR_EL2.TGE is set target/arm: Improve exception-taken logging target/arm: Initialize exc_secure correctly in do_v7m_exception_exit() target/arm: Restore M-profile CONTROL.SPSEL before any tailchaining target/arm: Implement tailchaining for M profile cores Richard Henderson (4): target/arm: Fix sign of sve_cmpeq_ppzw/sve_cmpne_ppzw target/arm: Fix typo in do_sat_addsub_64 target/arm: Reorganize SVE WHILE target/arm: Fix typo in helper_sve_movz_d accel/tcg/softmmu_template.h | 11 +- hw/intc/gic_internal.h | 282 +++++++++-- include/exec/exec-all.h | 2 - include/hw/arm/virt.h | 4 +- include/hw/arm/xlnx-zynqmp.h | 4 +- include/hw/intc/arm_gic_common.h | 43 +- include/hw/intc/armv7m_nvic.h | 1 + include/migration/vmstate.h | 3 + include/qom/cpu.h | 6 + target/arm/cpu.h | 62 ++- accel/tcg/cpu-exec.c | 3 + accel/tcg/cputlb.c | 111 +---- accel/tcg/translate-all.c | 23 +- exec.c | 6 - hw/arm/boot.c | 8 +- hw/arm/virt-acpi-build.c | 6 +- hw/arm/virt.c | 52 ++- hw/arm/xlnx-zynqmp.c | 92 +++- hw/intc/arm_gic.c | 987 +++++++++++++++++++++++++++++++-------- hw/intc/arm_gic_common.c | 154 ++++-- hw/intc/arm_gic_kvm.c | 31 +- hw/intc/arm_gicv3_cpuif.c | 19 +- hw/intc/armv7m_nvic.c | 82 +++- memory.c | 3 +- target/arm/cpu.c | 4 + target/arm/helper.c | 127 +++-- target/arm/op_helper.c | 14 + target/arm/sve_helper.c | 19 +- target/arm/translate-sve.c | 51 +- hw/intc/trace-events | 12 +- 30 files changed, 1724 insertions(+), 498 deletions(-) From: Julia Suvorova <jusual@mail.ru> MSR handling is the only place where CONTROL.nPRIV is modified. Signed-off-by: Julia Suvorova <jusual@mail.ru> Message-id: 20180705222622.17139-1-jusual@mail.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) write_v7m_control_spsel_for_secstate(env, val & R_V7M_CONTROL_SPSEL_MASK, M_REG_NS); - env->v7m.control[M_REG_NS] &= ~R_V7M_CONTROL_NPRIV_MASK; - env->v7m.control[M_REG_NS] |= val & R_V7M_CONTROL_NPRIV_MASK; + if (arm_feature(env, ARM_FEATURE_M_MAIN)) { + env->v7m.control[M_REG_NS] &= ~R_V7M_CONTROL_NPRIV_MASK; + env->v7m.control[M_REG_NS] |= val & R_V7M_CONTROL_NPRIV_MASK; + } return; case 0x98: /* SP_NS */ { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) !arm_v7m_is_handler_mode(env)) { write_v7m_control_spsel(env, (val & R_V7M_CONTROL_SPSEL_MASK) != 0); } - env->v7m.control[env->v7m.secure] &= ~R_V7M_CONTROL_NPRIV_MASK; - env->v7m.control[env->v7m.secure] |= val & R_V7M_CONTROL_NPRIV_MASK; + if (arm_feature(env, ARM_FEATURE_M_MAIN)) { + env->v7m.control[env->v7m.secure] &= ~R_V7M_CONTROL_NPRIV_MASK; + env->v7m.control[env->v7m.secure] |= val & R_V7M_CONTROL_NPRIV_MASK; + } break; default: bad_reg: -- 2.18.0 From: Julia Suvorova <jusual@mail.ru> Handle SCS reserved registers listed in ARMv6-M ARM D3.6.1. All reserved registers are RAZ/WI. ARM_FEATURE_M_MAIN is used for the checks, because these registers are reserved in ARMv8-M Baseline too. Signed-off-by: Julia Suvorova <jusual@mail.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/armv7m_nvic.c | 51 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 49 insertions(+), 2 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } return val; case 0xd10: /* System Control. */ + if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) { + goto bad_offset; + } return cpu->env.v7m.scr[attrs.secure]; case 0xd14: /* Configuration Control. */ /* The BFHFNMIGN bit is the only non-banked bit; we @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } return val; case 0xd2c: /* Hard Fault Status. */ + if (!arm_feature(&cpu->env, ARM_FEATURE_M_MAIN)) { + goto bad_offset; + } return cpu->env.v7m.hfsr; case 0xd30: /* Debug Fault Status. */ return cpu->env.v7m.dfsr; case 0xd34: /* MMFAR MemManage Fault Address */ + if (!arm_feature(&cpu->env, ARM_FEATURE_M_MAIN)) { + goto bad_offset; + } return cpu->env.v7m.mmfar[attrs.secure]; case 0xd38: /* Bus Fault Address. */ + if (!arm_feature(&cpu->env, ARM_FEATURE_M_MAIN)) { + goto bad_offset; + } return cpu->env.v7m.bfar; case 0xd3c: /* Aux Fault Status. */ /* TODO: Implement fault status registers. */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; case 0xd10: /* System Control. */ + if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) { + goto bad_offset; + } /* We don't implement deep-sleep so these bits are RAZ/WI. * The other bits in the register are banked. * QEMU's implementation ignores SEVONPEND and SLEEPONEXIT, which @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, nvic_irq_update(s); break; case 0xd2c: /* Hard Fault Status. */ + if (!arm_feature(&cpu->env, ARM_FEATURE_M_MAIN)) { + goto bad_offset; + } cpu->env.v7m.hfsr &= ~value; /* W1C */ break; case 0xd30: /* Debug Fault Status. */ cpu->env.v7m.dfsr &= ~value; /* W1C */ break; case 0xd34: /* Mem Manage Address. */ + if (!arm_feature(&cpu->env, ARM_FEATURE_M_MAIN)) { + goto bad_offset; + } cpu->env.v7m.mmfar[attrs.secure] = value; return; case 0xd38: /* Bus Fault Address. */ + if (!arm_feature(&cpu->env, ARM_FEATURE_M_MAIN)) { + goto bad_offset; + } cpu->env.v7m.bfar = value; return; case 0xd3c: /* Aux Fault Status. */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, case 0xf00: /* Software Triggered Interrupt Register */ { int excnum = (value & 0x1ff) + NVIC_FIRST_IRQ; + + if (!arm_feature(&cpu->env, ARM_FEATURE_M_MAIN)) { + goto bad_offset; + } + if (excnum < s->num_irq) { armv7m_nvic_set_pending(s, excnum, false); } @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, } } break; - case 0xd18 ... 0xd23: /* System Handler Priority (SHPR1, SHPR2, SHPR3) */ + case 0xd18: /* System Handler Priority (SHPR1) */ + if (!arm_feature(&s->cpu->env, ARM_FEATURE_M_MAIN)) { + val = 0; + break; + } + /* fall through */ + case 0xd1c ... 0xd23: /* System Handler Priority (SHPR2, SHPR3) */ val = 0; for (i = 0; i < size; i++) { unsigned hdlidx = (offset - 0xd14) + i; @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, } break; case 0xd28 ... 0xd2b: /* Configurable Fault Status (CFSR) */ + if (!arm_feature(&s->cpu->env, ARM_FEATURE_M_MAIN)) { + val = 0; + break; + }; /* The BFSR bits [15:8] are shared between security states * and we store them in the NS copy */ @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, } nvic_irq_update(s); return MEMTX_OK; - case 0xd18 ... 0xd23: /* System Handler Priority (SHPR1, SHPR2, SHPR3) */ + case 0xd18: /* System Handler Priority (SHPR1) */ + if (!arm_feature(&s->cpu->env, ARM_FEATURE_M_MAIN)) { + return MEMTX_OK; + } + /* fall through */ + case 0xd1c ... 0xd23: /* System Handler Priority (SHPR2, SHPR3) */ for (i = 0; i < size; i++) { unsigned hdlidx = (offset - 0xd14) + i; int newprio = extract32(value, i * 8, 8); @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, nvic_irq_update(s); return MEMTX_OK; case 0xd28 ... 0xd2b: /* Configurable Fault Status (CFSR) */ + if (!arm_feature(&s->cpu->env, ARM_FEATURE_M_MAIN)) { + return MEMTX_OK; + } /* All bits are W1C, so construct 32 bit value with 0s in * the parts not written by the access size */ -- 2.18.0 From: Julia Suvorova <jusual@mail.ru> Forbid stack alignment change. (CCR) Reserve FAULTMASK, BASEPRI registers. Report any fault as a HardFault. Disable MemManage, BusFault and UsageFault, so they always escalated to HardFault. (SHCSR) Signed-off-by: Julia Suvorova <jusual@mail.ru> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20180718095628.26442-1-jusual@mail.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/armv7m_nvic.c | 10 ++++++++++ target/arm/cpu.c | 4 ++++ target/arm/helper.c | 13 +++++++++++-- 3 files changed, 25 insertions(+), 2 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) val |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; return val; case 0xd24: /* System Handler Control and State (SHCSR) */ + if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) { + goto bad_offset; + } val = 0; if (attrs.secure) { if (s->sec_vectors[ARMV7M_EXCP_MEM].active) { @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.scr[attrs.secure] = value; break; case 0xd14: /* Configuration Control. */ + if (!arm_feature(&cpu->env, ARM_FEATURE_M_MAIN)) { + goto bad_offset; + } + /* Enforce RAZ/WI on reserved and must-RAZ/WI bits */ value &= (R_V7M_CCR_STKALIGN_MASK | R_V7M_CCR_BFHFNMIGN_MASK | @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.ccr[attrs.secure] = value; break; case 0xd24: /* System Handler Control and State (SHCSR) */ + if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) { + goto bad_offset; + } if (attrs.secure) { s->sec_vectors[ARMV7M_EXCP_MEM].active = (value & (1 << 0)) != 0; /* Secure HardFault active bit cannot be written */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->v7m.ccr[M_REG_NS] |= R_V7M_CCR_NONBASETHRDENA_MASK; env->v7m.ccr[M_REG_S] |= R_V7M_CCR_NONBASETHRDENA_MASK; } + if (!arm_feature(env, ARM_FEATURE_M_MAIN)) { + env->v7m.ccr[M_REG_NS] |= R_V7M_CCR_UNALIGN_TRP_MASK; + env->v7m.ccr[M_REG_S] |= R_V7M_CCR_UNALIGN_TRP_MASK; + } /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.primask[M_REG_NS] = val & 1; return; case 0x91: /* BASEPRI_NS */ - if (!env->v7m.secure) { + if (!env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_MAIN)) { return; } env->v7m.basepri[M_REG_NS] = val & 0xff; return; case 0x93: /* FAULTMASK_NS */ - if (!env->v7m.secure) { + if (!env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_MAIN)) { return; } env->v7m.faultmask[M_REG_NS] = val & 1; @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.primask[env->v7m.secure] = val & 1; break; case 17: /* BASEPRI */ + if (!arm_feature(env, ARM_FEATURE_M_MAIN)) { + goto bad_reg; + } env->v7m.basepri[env->v7m.secure] = val & 0xff; break; case 18: /* BASEPRI_MAX */ + if (!arm_feature(env, ARM_FEATURE_M_MAIN)) { + goto bad_reg; + } val &= 0xff; if (val != 0 && (val < env->v7m.basepri[env->v7m.secure] || env->v7m.basepri[env->v7m.secure] == 0)) { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) } break; case 19: /* FAULTMASK */ + if (!arm_feature(env, ARM_FEATURE_M_MAIN)) { + goto bad_reg; + } env->v7m.faultmask[env->v7m.secure] = val & 1; break; case 20: /* CONTROL */ -- 2.18.0 From: Julia Suvorova <jusual@mail.ru> The differences from ARMv7-M NVIC are: * ARMv6-M only supports up to 32 external interrupts (configurable feature already). The ICTR is reserved. * Active Bit Register is reserved. * ARMv6-M supports 4 priority levels against 256 in ARMv7-M. Signed-off-by: Julia Suvorova <jusual@mail.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 1 + hw/intc/armv7m_nvic.c | 21 ++++++++++++++++++--- 2 files changed, 19 insertions(+), 3 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { VecInfo sec_vectors[NVIC_INTERNAL_VECTORS]; /* The PRIGROUP field in AIRCR is banked */ uint32_t prigroup[M_REG_NUM_BANKS]; + uint8_t num_prio_bits; /* v8M NVIC_ITNS state (stored as a bool per bit) */ bool itns[NVIC_MAX_VECTORS]; diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void set_prio(NVICState *s, unsigned irq, bool secure, uint8_t prio) assert(irq > ARMV7M_EXCP_NMI); /* only use for configurable prios */ assert(irq < s->num_irq); + prio &= MAKE_64BIT_MASK(8 - s->num_prio_bits, s->num_prio_bits); + if (secure) { assert(exc_is_banked(irq)); s->sec_vectors[irq].prio = prio; @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) switch (offset) { case 4: /* Interrupt Control Type. */ + if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) { + goto bad_offset; + } return ((s->num_irq - NVIC_FIRST_IRQ) / 32) - 1; case 0xc: /* CPPWR */ if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, "Setting VECTRESET when not in DEBUG mode " "is UNPREDICTABLE\n"); } - s->prigroup[attrs.secure] = extract32(value, - R_V7M_AIRCR_PRIGROUP_SHIFT, - R_V7M_AIRCR_PRIGROUP_LENGTH); + if (arm_feature(&cpu->env, ARM_FEATURE_M_MAIN)) { + s->prigroup[attrs.secure] = + extract32(value, + R_V7M_AIRCR_PRIGROUP_SHIFT, + R_V7M_AIRCR_PRIGROUP_LENGTH); + } if (attrs.secure) { /* These bits are only writable by secure */ cpu->env.v7m.aircr = value & @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, break; case 0x300 ... 0x33f: /* NVIC Active */ val = 0; + + if (!arm_feature(&s->cpu->env, ARM_FEATURE_V7)) { + break; + } + startvec = 8 * (offset - 0x300) + NVIC_FIRST_IRQ; /* vector # */ for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) /* include space for internal exception vectors */ s->num_irq += NVIC_FIRST_IRQ; + s->num_prio_bits = arm_feature(&s->cpu->env, ARM_FEATURE_V7) ? 8 : 2; + object_property_set_bool(OBJECT(&s->systick[M_REG_NS]), true, "realized", &err); if (err != NULL) { -- 2.18.0 The io_readx() function needs to know whether the load it is doing is an MMU_DATA_LOAD or an MMU_INST_FETCH, so that it can pass the right value to the cpu_transaction_failed() function. Plumb this information through from the softmmu code. This is currently not often going to give the wrong answer, because usually instruction fetches go via get_page_addr_code(). However once we switch over to handling execution from non-RAM by creating single-insn TBs, the path for an insn fetch to generate a bus error will be through cpu_ld*_code() and io_readx(), so without this change we will generate a d-side fault when we should generate an i-side fault. We also have to pass the access type via a CPU struct global down to unassigned_mem_read(), for the benefit of the targets which still use the cpu_unassigned_access() hook (m68k, mips, sparc, xtensa). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180710160013.26559-2-peter.maydell@linaro.org --- accel/tcg/softmmu_template.h | 11 +++++++---- include/qom/cpu.h | 6 ++++++ accel/tcg/cputlb.c | 5 +++-- memory.c | 3 ++- 4 files changed, 18 insertions(+), 7 deletions(-) diff --git a/accel/tcg/softmmu_template.h b/accel/tcg/softmmu_template.h index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/softmmu_template.h +++ b/accel/tcg/softmmu_template.h @@ -XXX,XX +XXX,XX @@ static inline DATA_TYPE glue(io_read, SUFFIX)(CPUArchState *env, size_t mmu_idx, size_t index, target_ulong addr, uintptr_t retaddr, - bool recheck) + bool recheck, + MMUAccessType access_type) { CPUIOTLBEntry *iotlbentry = &env->iotlb[mmu_idx][index]; return io_readx(env, iotlbentry, mmu_idx, addr, retaddr, recheck, - DATA_SIZE); + access_type, DATA_SIZE); } #endif @@ -XXX,XX +XXX,XX @@ WORD_TYPE helper_le_ld_name(CPUArchState *env, target_ulong addr, /* ??? Note that the io helpers always read data in the target byte ordering. We should push the LE/BE request down into io. */ res = glue(io_read, SUFFIX)(env, mmu_idx, index, addr, retaddr, - tlb_addr & TLB_RECHECK); + tlb_addr & TLB_RECHECK, + READ_ACCESS_TYPE); res = TGT_LE(res); return res; } @@ -XXX,XX +XXX,XX @@ WORD_TYPE helper_be_ld_name(CPUArchState *env, target_ulong addr, /* ??? Note that the io helpers always read data in the target byte ordering. We should push the LE/BE request down into io. */ res = glue(io_read, SUFFIX)(env, mmu_idx, index, addr, retaddr, - tlb_addr & TLB_RECHECK); + tlb_addr & TLB_RECHECK, + READ_ACCESS_TYPE); res = TGT_BE(res); return res; } diff --git a/include/qom/cpu.h b/include/qom/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/include/qom/cpu.h +++ b/include/qom/cpu.h @@ -XXX,XX +XXX,XX @@ struct CPUState { */ uintptr_t mem_io_pc; vaddr mem_io_vaddr; + /* + * This is only needed for the legacy cpu_unassigned_access() hook; + * when all targets using it have been converted to use + * cpu_transaction_failed() instead it can be removed. + */ + MMUAccessType mem_io_access_type; int kvm_fd; struct KVMState *kvm_state; diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/cputlb.c +++ b/accel/tcg/cputlb.c @@ -XXX,XX +XXX,XX @@ static inline ram_addr_t qemu_ram_addr_from_host_nofail(void *ptr) static uint64_t io_readx(CPUArchState *env, CPUIOTLBEntry *iotlbentry, int mmu_idx, target_ulong addr, uintptr_t retaddr, - bool recheck, int size) + bool recheck, MMUAccessType access_type, int size) { CPUState *cpu = ENV_GET_CPU(env); hwaddr mr_offset; @@ -XXX,XX +XXX,XX @@ static uint64_t io_readx(CPUArchState *env, CPUIOTLBEntry *iotlbentry, } cpu->mem_io_vaddr = addr; + cpu->mem_io_access_type = access_type; if (mr->global_locking && !qemu_mutex_iothread_locked()) { qemu_mutex_lock_iothread(); @@ -XXX,XX +XXX,XX @@ static uint64_t io_readx(CPUArchState *env, CPUIOTLBEntry *iotlbentry, section->offset_within_address_space - section->offset_within_region; - cpu_transaction_failed(cpu, physaddr, addr, size, MMU_DATA_LOAD, + cpu_transaction_failed(cpu, physaddr, addr, size, access_type, mmu_idx, iotlbentry->attrs, r, retaddr); } if (locked) { diff --git a/memory.c b/memory.c index XXXXXXX..XXXXXXX 100644 --- a/memory.c +++ b/memory.c @@ -XXX,XX +XXX,XX @@ static uint64_t unassigned_mem_read(void *opaque, hwaddr addr, printf("Unassigned mem read " TARGET_FMT_plx "\n", addr); #endif if (current_cpu != NULL) { - cpu_unassigned_access(current_cpu, addr, false, false, 0, size); + bool is_exec = current_cpu->mem_io_access_type == MMU_INST_FETCH; + cpu_unassigned_access(current_cpu, addr, false, is_exec, 0, size); } return 0; } -- 2.18.0 When we support execution from non-RAM MMIO regions, get_page_addr_code() will return -1 to indicate that there is no RAM at the requested address. Handle this in the cpu-exec TB hashtable lookup code, treating it as "no match found". Note that the call to get_page_addr_code() in tb_lookup_cmp() needs no changes -- a return of -1 will already correctly result in the function returning false. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180710160013.26559-3-peter.maydell@linaro.org --- accel/tcg/cpu-exec.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/accel/tcg/cpu-exec.c b/accel/tcg/cpu-exec.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/cpu-exec.c +++ b/accel/tcg/cpu-exec.c @@ -XXX,XX +XXX,XX @@ TranslationBlock *tb_htable_lookup(CPUState *cpu, target_ulong pc, desc.trace_vcpu_dstate = *cpu->trace_dstate; desc.pc = pc; phys_pc = get_page_addr_code(desc.env, pc); + if (phys_pc == -1) { + return NULL; + } desc.phys_page1 = phys_pc & TARGET_PAGE_MASK; h = tb_hash_func(phys_pc, pc, flags, cf_mask, *cpu->trace_dstate); return qht_lookup_custom(&tb_ctx.htable, &desc, h, tb_lookup_cmp); -- 2.18.0 When we support execution from non-RAM MMIO regions, get_page_addr_code() will return -1 to indicate that there is no RAM at the requested address. Handle this in tb_check_watchpoint() -- if the exception happened for a PC which doesn't correspond to RAM then there is no need to invalidate any TBs, because the one-instruction TB will not have been cached. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180710160013.26559-4-peter.maydell@linaro.org --- accel/tcg/translate-all.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/translate-all.c +++ b/accel/tcg/translate-all.c @@ -XXX,XX +XXX,XX @@ void tb_check_watchpoint(CPUState *cpu) cpu_get_tb_cpu_state(env, &pc, &cs_base, &flags); addr = get_page_addr_code(env, pc); - tb_invalidate_phys_range(addr, addr + 1); + if (addr != -1) { + tb_invalidate_phys_range(addr, addr + 1); + } } } -- 2.18.0 If get_page_addr_code() returns -1, this indicates that there is no RAM page we can read a full TB from. Instead we must create a TB which contains a single instruction and which we do not cache, so it is executed only once. Since this means we can now have TBs which are not in any page list, we also need to make tb_phys_invalidate() handle them (by not trying to remove them from a nonexistent page list). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180710160013.26559-5-peter.maydell@linaro.org --- accel/tcg/translate-all.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/translate-all.c +++ b/accel/tcg/translate-all.c @@ -XXX,XX +XXX,XX @@ static void tb_phys_invalidate__locked(TranslationBlock *tb) */ void tb_phys_invalidate(TranslationBlock *tb, tb_page_addr_t page_addr) { - if (page_addr == -1) { + if (page_addr == -1 && tb->page_addr[0] != -1) { page_lock_tb(tb); do_tb_phys_invalidate(tb, true); page_unlock_tb(tb); @@ -XXX,XX +XXX,XX @@ tb_link_page(TranslationBlock *tb, tb_page_addr_t phys_pc, assert_memory_lock(); + if (phys_pc == -1) { + /* + * If the TB is not associated with a physical RAM page then + * it must be a temporary one-insn TB, and we have nothing to do + * except fill in the page_addr[] fields. + */ + assert(tb->cflags & CF_NOCACHE); + tb->page_addr[0] = tb->page_addr[1] = -1; + return tb; + } + /* * Add the TB to the page list, acquiring first the pages's locks. * We keep the locks held until after inserting the TB in the hash table, @@ -XXX,XX +XXX,XX @@ TranslationBlock *tb_gen_code(CPUState *cpu, phys_pc = get_page_addr_code(env, pc); + if (phys_pc == -1) { + /* Generate a temporary TB with 1 insn in it */ + cflags &= ~CF_COUNT_MASK; + cflags |= CF_NOCACHE | 1; + } + buffer_overflow: tb = tb_alloc(pc); if (unlikely(!tb)) { -- 2.18.0 Now that all the callers can handle get_page_addr_code() returning -1, remove all the code which tries to handle execution from MMIO regions or small-MMU-region RAM areas. This will mean that we can correctly execute from these areas, rather than ending up either aborting QEMU or delivering an incorrect guest exception. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180710160013.26559-6-peter.maydell@linaro.org --- accel/tcg/cputlb.c | 95 +++++----------------------------------------- 1 file changed, 10 insertions(+), 85 deletions(-) diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/cputlb.c +++ b/accel/tcg/cputlb.c @@ -XXX,XX +XXX,XX @@ void tlb_set_page(CPUState *cpu, target_ulong vaddr, prot, mmu_idx, size); } -static void report_bad_exec(CPUState *cpu, target_ulong addr) -{ - /* Accidentally executing outside RAM or ROM is quite common for - * several user-error situations, so report it in a way that - * makes it clear that this isn't a QEMU bug and provide suggestions - * about what a user could do to fix things. - */ - error_report("Trying to execute code outside RAM or ROM at 0x" - TARGET_FMT_lx, addr); - error_printf("This usually means one of the following happened:\n\n" - "(1) You told QEMU to execute a kernel for the wrong machine " - "type, and it crashed on startup (eg trying to run a " - "raspberry pi kernel on a versatilepb QEMU machine)\n" - "(2) You didn't give QEMU a kernel or BIOS filename at all, " - "and QEMU executed a ROM full of no-op instructions until " - "it fell off the end\n" - "(3) Your guest kernel has a bug and crashed by jumping " - "off into nowhere\n\n" - "This is almost always one of the first two, so check your " - "command line and that you are using the right type of kernel " - "for this machine.\n" - "If you think option (3) is likely then you can try debugging " - "your guest with the -d debug options; in particular " - "-d guest_errors will cause the log to include a dump of the " - "guest register state at this point.\n\n" - "Execution cannot continue; stopping here.\n\n"); - - /* Report also to the logs, with more detail including register dump */ - qemu_log_mask(LOG_GUEST_ERROR, "qemu: fatal: Trying to execute code " - "outside RAM or ROM at 0x" TARGET_FMT_lx "\n", addr); - log_cpu_state_mask(LOG_GUEST_ERROR, cpu, CPU_DUMP_FPU | CPU_DUMP_CCOP); -} - static inline ram_addr_t qemu_ram_addr_from_host_nofail(void *ptr) { ram_addr_t ram_addr; @@ -XXX,XX +XXX,XX @@ tb_page_addr_t get_page_addr_code(CPUArchState *env, target_ulong addr) MemoryRegionSection *section; CPUState *cpu = ENV_GET_CPU(env); CPUIOTLBEntry *iotlbentry; - hwaddr physaddr, mr_offset; index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1); mmu_idx = cpu_mmu_index(env, true); @@ -XXX,XX +XXX,XX @@ tb_page_addr_t get_page_addr_code(CPUArchState *env, target_ulong addr) if (unlikely(env->tlb_table[mmu_idx][index].addr_code & TLB_RECHECK)) { /* * This is a TLB_RECHECK access, where the MMU protection - * covers a smaller range than a target page, and we must - * repeat the MMU check here. This tlb_fill() call might - * longjump out if this access should cause a guest exception. - */ - int index; - target_ulong tlb_addr; - - tlb_fill(cpu, addr, 0, MMU_INST_FETCH, mmu_idx, 0); - - index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1); - tlb_addr = env->tlb_table[mmu_idx][index].addr_code; - if (!(tlb_addr & ~(TARGET_PAGE_MASK | TLB_RECHECK))) { - /* RAM access. We can't handle this, so for now just stop */ - cpu_abort(cpu, "Unable to handle guest executing from RAM within " - "a small MPU region at 0x" TARGET_FMT_lx, addr); - } - /* - * Fall through to handle IO accesses (which will almost certainly - * also result in failure) + * covers a smaller range than a target page. Return -1 to + * indicate that we cannot simply execute from RAM here; + * we will perform the necessary repeat of the MMU check + * when the "execute a single insn" code performs the + * load of the guest insn. */ + return -1; } iotlbentry = &env->iotlb[mmu_idx][index]; section = iotlb_to_section(cpu, iotlbentry->addr, iotlbentry->attrs); mr = section->mr; if (memory_region_is_unassigned(mr)) { - qemu_mutex_lock_iothread(); - if (memory_region_request_mmio_ptr(mr, addr)) { - qemu_mutex_unlock_iothread(); - /* A MemoryRegion is potentially added so re-run the - * get_page_addr_code. - */ - return get_page_addr_code(env, addr); - } - qemu_mutex_unlock_iothread(); - - /* Give the new-style cpu_transaction_failed() hook first chance - * to handle this. - * This is not the ideal place to detect and generate CPU - * exceptions for instruction fetch failure (for instance - * we don't know the length of the access that the CPU would - * use, and it would be better to go ahead and try the access - * and use the MemTXResult it produced). However it is the - * simplest place we have currently available for the check. + /* + * Not guest RAM, so there is no ram_addr_t for it. Return -1, + * and we will execute a single insn from this device. */ - mr_offset = (iotlbentry->addr & TARGET_PAGE_MASK) + addr; - physaddr = mr_offset + - section->offset_within_address_space - - section->offset_within_region; - cpu_transaction_failed(cpu, physaddr, addr, 0, MMU_INST_FETCH, mmu_idx, - iotlbentry->attrs, MEMTX_DECODE_ERROR, 0); - - cpu_unassigned_access(cpu, addr, false, true, 0, 4); - /* The CPU's unassigned access hook might have longjumped out - * with an exception. If it didn't (or there was no hook) then - * we can't proceed further. - */ - report_bad_exec(cpu, addr); - exit(1); + return -1; } p = (void *)((uintptr_t)addr + env->tlb_table[mmu_idx][index].addend); return qemu_ram_addr_from_host_nofail(p); -- 2.18.0 Now that we have full support for small regions, including execution, we can remove the workarounds where we marked all small regions as non-executable for the M-profile MPU and SAU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180710160013.26559-7-peter.maydell@linaro.org --- target/arm/helper.c | 23 ----------------------- 1 file changed, 23 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, fi->type = ARMFault_Permission; fi->level = 1; - /* - * Core QEMU code can't handle execution from small pages yet, so - * don't try it. This way we'll get an MPU exception, rather than - * eventually causing QEMU to exit in get_page_addr_code(). - */ - if (*page_size < TARGET_PAGE_SIZE && (*prot & PAGE_EXEC)) { - qemu_log_mask(LOG_UNIMP, - "MPU: No support for execution from regions " - "smaller than 1K\n"); - *prot &= ~PAGE_EXEC; - } return !(*prot & (1 << access_type)); } @@ -XXX,XX +XXX,XX @@ static bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, fi->type = ARMFault_Permission; fi->level = 1; - /* - * Core QEMU code can't handle execution from small pages yet, so - * don't try it. This means any attempted execution will generate - * an MPU exception, rather than eventually causing QEMU to exit in - * get_page_addr_code(). - */ - if (*is_subpage && (*prot & PAGE_EXEC)) { - qemu_log_mask(LOG_UNIMP, - "MPU: No support for execution from regions " - "smaller than 1K\n"); - *prot &= ~PAGE_EXEC; - } return !(*prot & (1 << access_type)); } -- 2.18.0 We set up TLB entries in tlb_set_page_with_attrs(), where we have some logic for determining whether the TLB entry is considered to be RAM-backed, and thus has a valid addend field. When we look at the TLB entry in get_page_addr_code(), we use different logic for determining whether to treat the page as RAM-backed and use the addend field. This is confusing, and in fact buggy, because the code in tlb_set_page_with_attrs() correctly decides that rom_device memory regions not in romd mode are not RAM-backed, but the code in get_page_addr_code() thinks they are RAM-backed. This typically results in "Bad ram pointer" assertion if the guest tries to execute from such a memory region. Fix this by making get_page_addr_code() just look at the TLB_MMIO bit in the code_address field of the TLB, which tlb_set_page_with_attrs() sets if and only if the addend field is not valid for code execution. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180713150945.12348-1-peter.maydell@linaro.org --- include/exec/exec-all.h | 2 -- accel/tcg/cputlb.c | 29 ++++++++--------------------- exec.c | 6 ------ 3 files changed, 8 insertions(+), 29 deletions(-) diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/exec-all.h +++ b/include/exec/exec-all.h @@ -XXX,XX +XXX,XX @@ hwaddr memory_region_section_get_iotlb(CPUState *cpu, hwaddr paddr, hwaddr xlat, int prot, target_ulong *address); -bool memory_region_is_unassigned(MemoryRegion *mr); - #endif /* vl.c */ diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/cputlb.c +++ b/accel/tcg/cputlb.c @@ -XXX,XX +XXX,XX @@ tb_page_addr_t get_page_addr_code(CPUArchState *env, target_ulong addr) { int mmu_idx, index; void *p; - MemoryRegion *mr; - MemoryRegionSection *section; - CPUState *cpu = ENV_GET_CPU(env); - CPUIOTLBEntry *iotlbentry; index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1); mmu_idx = cpu_mmu_index(env, true); @@ -XXX,XX +XXX,XX @@ tb_page_addr_t get_page_addr_code(CPUArchState *env, target_ulong addr) assert(tlb_hit(env->tlb_table[mmu_idx][index].addr_code, addr)); } - if (unlikely(env->tlb_table[mmu_idx][index].addr_code & TLB_RECHECK)) { + if (unlikely(env->tlb_table[mmu_idx][index].addr_code & + (TLB_RECHECK | TLB_MMIO))) { /* - * This is a TLB_RECHECK access, where the MMU protection - * covers a smaller range than a target page. Return -1 to - * indicate that we cannot simply execute from RAM here; - * we will perform the necessary repeat of the MMU check - * when the "execute a single insn" code performs the - * load of the guest insn. + * Return -1 if we can't translate and execute from an entire + * page of RAM here, which will cause us to execute by loading + * and translating one insn at a time, without caching: + * - TLB_RECHECK: means the MMU protection covers a smaller range + * than a target page, so we must redo the MMU check every insn + * - TLB_MMIO: region is not backed by RAM */ return -1; } - iotlbentry = &env->iotlb[mmu_idx][index]; - section = iotlb_to_section(cpu, iotlbentry->addr, iotlbentry->attrs); - mr = section->mr; - if (memory_region_is_unassigned(mr)) { - /* - * Not guest RAM, so there is no ram_addr_t for it. Return -1, - * and we will execute a single insn from this device. - */ - return -1; - } p = (void *)((uintptr_t)addr + env->tlb_table[mmu_idx][index].addend); return qemu_ram_addr_from_host_nofail(p); } diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static MemoryRegionSection *phys_page_find(AddressSpaceDispatch *d, hwaddr addr) } } -bool memory_region_is_unassigned(MemoryRegion *mr) -{ - return mr != &io_mem_rom && mr != &io_mem_notdirty && !mr->rom_device - && mr != &io_mem_watch; -} - /* Called from RCU critical section */ static MemoryRegionSection *address_space_lookup_region(AddressSpaceDispatch *d, hwaddr addr, -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> In preparation for the virtualization extensions implementation, refactor the name of the functions and macros that act on the GIC distributor to make that fact explicit. It will be useful to differentiate them from the ones that will act on the virtual interfaces. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-2-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gic_internal.h | 51 ++++++------ hw/intc/arm_gic.c | 163 +++++++++++++++++++++------------------ hw/intc/arm_gic_common.c | 6 +- hw/intc/arm_gic_kvm.c | 23 +++--- 4 files changed, 127 insertions(+), 116 deletions(-) diff --git a/hw/intc/gic_internal.h b/hw/intc/gic_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gic_internal.h +++ b/hw/intc/gic_internal.h @@ -XXX,XX +XXX,XX @@ #define GIC_BASE_IRQ 0 -#define GIC_SET_ENABLED(irq, cm) s->irq_state[irq].enabled |= (cm) -#define GIC_CLEAR_ENABLED(irq, cm) s->irq_state[irq].enabled &= ~(cm) -#define GIC_TEST_ENABLED(irq, cm) ((s->irq_state[irq].enabled & (cm)) != 0) -#define GIC_SET_PENDING(irq, cm) s->irq_state[irq].pending |= (cm) -#define GIC_CLEAR_PENDING(irq, cm) s->irq_state[irq].pending &= ~(cm) -#define GIC_SET_ACTIVE(irq, cm) s->irq_state[irq].active |= (cm) -#define GIC_CLEAR_ACTIVE(irq, cm) s->irq_state[irq].active &= ~(cm) -#define GIC_TEST_ACTIVE(irq, cm) ((s->irq_state[irq].active & (cm)) != 0) -#define GIC_SET_MODEL(irq) s->irq_state[irq].model = true -#define GIC_CLEAR_MODEL(irq) s->irq_state[irq].model = false -#define GIC_TEST_MODEL(irq) s->irq_state[irq].model -#define GIC_SET_LEVEL(irq, cm) s->irq_state[irq].level |= (cm) -#define GIC_CLEAR_LEVEL(irq, cm) s->irq_state[irq].level &= ~(cm) -#define GIC_TEST_LEVEL(irq, cm) ((s->irq_state[irq].level & (cm)) != 0) -#define GIC_SET_EDGE_TRIGGER(irq) s->irq_state[irq].edge_trigger = true -#define GIC_CLEAR_EDGE_TRIGGER(irq) s->irq_state[irq].edge_trigger = false -#define GIC_TEST_EDGE_TRIGGER(irq) (s->irq_state[irq].edge_trigger) -#define GIC_GET_PRIORITY(irq, cpu) (((irq) < GIC_INTERNAL) ? \ +#define GIC_DIST_SET_ENABLED(irq, cm) (s->irq_state[irq].enabled |= (cm)) +#define GIC_DIST_CLEAR_ENABLED(irq, cm) (s->irq_state[irq].enabled &= ~(cm)) +#define GIC_DIST_TEST_ENABLED(irq, cm) ((s->irq_state[irq].enabled & (cm)) != 0) +#define GIC_DIST_SET_PENDING(irq, cm) (s->irq_state[irq].pending |= (cm)) +#define GIC_DIST_CLEAR_PENDING(irq, cm) (s->irq_state[irq].pending &= ~(cm)) +#define GIC_DIST_SET_ACTIVE(irq, cm) (s->irq_state[irq].active |= (cm)) +#define GIC_DIST_CLEAR_ACTIVE(irq, cm) (s->irq_state[irq].active &= ~(cm)) +#define GIC_DIST_TEST_ACTIVE(irq, cm) ((s->irq_state[irq].active & (cm)) != 0) +#define GIC_DIST_SET_MODEL(irq) (s->irq_state[irq].model = true) +#define GIC_DIST_CLEAR_MODEL(irq) (s->irq_state[irq].model = false) +#define GIC_DIST_TEST_MODEL(irq) (s->irq_state[irq].model) +#define GIC_DIST_SET_LEVEL(irq, cm) (s->irq_state[irq].level |= (cm)) +#define GIC_DIST_CLEAR_LEVEL(irq, cm) (s->irq_state[irq].level &= ~(cm)) +#define GIC_DIST_TEST_LEVEL(irq, cm) ((s->irq_state[irq].level & (cm)) != 0) +#define GIC_DIST_SET_EDGE_TRIGGER(irq) (s->irq_state[irq].edge_trigger = true) +#define GIC_DIST_CLEAR_EDGE_TRIGGER(irq) \ + (s->irq_state[irq].edge_trigger = false) +#define GIC_DIST_TEST_EDGE_TRIGGER(irq) (s->irq_state[irq].edge_trigger) +#define GIC_DIST_GET_PRIORITY(irq, cpu) (((irq) < GIC_INTERNAL) ? \ s->priority1[irq][cpu] : \ s->priority2[(irq) - GIC_INTERNAL]) -#define GIC_TARGET(irq) s->irq_target[irq] -#define GIC_CLEAR_GROUP(irq, cm) (s->irq_state[irq].group &= ~(cm)) -#define GIC_SET_GROUP(irq, cm) (s->irq_state[irq].group |= (cm)) -#define GIC_TEST_GROUP(irq, cm) ((s->irq_state[irq].group & (cm)) != 0) +#define GIC_DIST_TARGET(irq) (s->irq_target[irq]) +#define GIC_DIST_CLEAR_GROUP(irq, cm) (s->irq_state[irq].group &= ~(cm)) +#define GIC_DIST_SET_GROUP(irq, cm) (s->irq_state[irq].group |= (cm)) +#define GIC_DIST_TEST_GROUP(irq, cm) ((s->irq_state[irq].group & (cm)) != 0) #define GICD_CTLR_EN_GRP0 (1U << 0) #define GICD_CTLR_EN_GRP1 (1U << 1) @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs); void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs); void gic_update(GICState *s); void gic_init_irqs_and_distributor(GICState *s); -void gic_set_priority(GICState *s, int cpu, int irq, uint8_t val, - MemTxAttrs attrs); +void gic_dist_set_priority(GICState *s, int cpu, int irq, uint8_t val, + MemTxAttrs attrs); static inline bool gic_test_pending(GICState *s, int irq, int cm) { @@ -XXX,XX +XXX,XX @@ static inline bool gic_test_pending(GICState *s, int irq, int cm) * GICD_ISPENDR to set the state pending. */ return (s->irq_state[irq].pending & cm) || - (!GIC_TEST_EDGE_TRIGGER(irq) && GIC_TEST_LEVEL(irq, cm)); + (!GIC_DIST_TEST_EDGE_TRIGGER(irq) && GIC_DIST_TEST_LEVEL(irq, cm)); } } diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ void gic_update(GICState *s) best_prio = 0x100; best_irq = 1023; for (irq = 0; irq < s->num_irq; irq++) { - if (GIC_TEST_ENABLED(irq, cm) && gic_test_pending(s, irq, cm) && - (!GIC_TEST_ACTIVE(irq, cm)) && - (irq < GIC_INTERNAL || GIC_TARGET(irq) & cm)) { - if (GIC_GET_PRIORITY(irq, cpu) < best_prio) { - best_prio = GIC_GET_PRIORITY(irq, cpu); + if (GIC_DIST_TEST_ENABLED(irq, cm) && + gic_test_pending(s, irq, cm) && + (!GIC_DIST_TEST_ACTIVE(irq, cm)) && + (irq < GIC_INTERNAL || GIC_DIST_TARGET(irq) & cm)) { + if (GIC_DIST_GET_PRIORITY(irq, cpu) < best_prio) { + best_prio = GIC_DIST_GET_PRIORITY(irq, cpu); best_irq = irq; } } @@ -XXX,XX +XXX,XX @@ void gic_update(GICState *s) if (best_prio < s->priority_mask[cpu]) { s->current_pending[cpu] = best_irq; if (best_prio < s->running_priority[cpu]) { - int group = GIC_TEST_GROUP(best_irq, cm); + int group = GIC_DIST_TEST_GROUP(best_irq, cm); if (extract32(s->ctlr, group, 1) && extract32(s->cpu_ctlr[cpu], group, 1)) { @@ -XXX,XX +XXX,XX @@ void gic_set_pending_private(GICState *s, int cpu, int irq) } DPRINTF("Set %d pending cpu %d\n", irq, cpu); - GIC_SET_PENDING(irq, cm); + GIC_DIST_SET_PENDING(irq, cm); gic_update(s); } @@ -XXX,XX +XXX,XX @@ static void gic_set_irq_11mpcore(GICState *s, int irq, int level, int cm, int target) { if (level) { - GIC_SET_LEVEL(irq, cm); - if (GIC_TEST_EDGE_TRIGGER(irq) || GIC_TEST_ENABLED(irq, cm)) { + GIC_DIST_SET_LEVEL(irq, cm); + if (GIC_DIST_TEST_EDGE_TRIGGER(irq) || GIC_DIST_TEST_ENABLED(irq, cm)) { DPRINTF("Set %d pending mask %x\n", irq, target); - GIC_SET_PENDING(irq, target); + GIC_DIST_SET_PENDING(irq, target); } } else { - GIC_CLEAR_LEVEL(irq, cm); + GIC_DIST_CLEAR_LEVEL(irq, cm); } } @@ -XXX,XX +XXX,XX @@ static void gic_set_irq_generic(GICState *s, int irq, int level, int cm, int target) { if (level) { - GIC_SET_LEVEL(irq, cm); + GIC_DIST_SET_LEVEL(irq, cm); DPRINTF("Set %d pending mask %x\n", irq, target); - if (GIC_TEST_EDGE_TRIGGER(irq)) { - GIC_SET_PENDING(irq, target); + if (GIC_DIST_TEST_EDGE_TRIGGER(irq)) { + GIC_DIST_SET_PENDING(irq, target); } } else { - GIC_CLEAR_LEVEL(irq, cm); + GIC_DIST_CLEAR_LEVEL(irq, cm); } } @@ -XXX,XX +XXX,XX @@ static void gic_set_irq(void *opaque, int irq, int level) /* The first external input line is internal interrupt 32. */ cm = ALL_CPU_MASK; irq += GIC_INTERNAL; - target = GIC_TARGET(irq); + target = GIC_DIST_TARGET(irq); } else { int cpu; irq -= (s->num_irq - GIC_INTERNAL); @@ -XXX,XX +XXX,XX @@ static void gic_set_irq(void *opaque, int irq, int level) assert(irq >= GIC_NR_SGIS); - if (level == GIC_TEST_LEVEL(irq, cm)) { + if (level == GIC_DIST_TEST_LEVEL(irq, cm)) { return; } @@ -XXX,XX +XXX,XX @@ static uint16_t gic_get_current_pending_irq(GICState *s, int cpu, uint16_t pending_irq = s->current_pending[cpu]; if (pending_irq < GIC_MAXIRQ && gic_has_groups(s)) { - int group = GIC_TEST_GROUP(pending_irq, (1 << cpu)); + int group = GIC_DIST_TEST_GROUP(pending_irq, (1 << cpu)); /* On a GIC without the security extensions, reading this register * behaves in the same way as a secure access to a GIC with them. */ @@ -XXX,XX +XXX,XX @@ static int gic_get_group_priority(GICState *s, int cpu, int irq) if (gic_has_groups(s) && !(s->cpu_ctlr[cpu] & GICC_CTLR_CBPR) && - GIC_TEST_GROUP(irq, (1 << cpu))) { + GIC_DIST_TEST_GROUP(irq, (1 << cpu))) { bpr = s->abpr[cpu] - 1; assert(bpr >= 0); } else { @@ -XXX,XX +XXX,XX @@ static int gic_get_group_priority(GICState *s, int cpu, int irq) */ mask = ~0U << ((bpr & 7) + 1); - return GIC_GET_PRIORITY(irq, cpu) & mask; + return GIC_DIST_GET_PRIORITY(irq, cpu) & mask; } static void gic_activate_irq(GICState *s, int cpu, int irq) @@ -XXX,XX +XXX,XX @@ static void gic_activate_irq(GICState *s, int cpu, int irq) int regno = preemption_level / 32; int bitno = preemption_level % 32; - if (gic_has_groups(s) && GIC_TEST_GROUP(irq, (1 << cpu))) { + if (gic_has_groups(s) && GIC_DIST_TEST_GROUP(irq, (1 << cpu))) { s->nsapr[regno][cpu] |= (1 << bitno); } else { s->apr[regno][cpu] |= (1 << bitno); } s->running_priority[cpu] = prio; - GIC_SET_ACTIVE(irq, 1 << cpu); + GIC_DIST_SET_ACTIVE(irq, 1 << cpu); } static int gic_get_prio_from_apr_bits(GICState *s, int cpu) @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) return irq; } - if (GIC_GET_PRIORITY(irq, cpu) >= s->running_priority[cpu]) { + if (GIC_DIST_GET_PRIORITY(irq, cpu) >= s->running_priority[cpu]) { DPRINTF("ACK, pending interrupt (%d) has insufficient priority\n", irq); return 1023; } @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) /* Clear pending flags for both level and edge triggered interrupts. * Level triggered IRQs will be reasserted once they become inactive. */ - GIC_CLEAR_PENDING(irq, GIC_TEST_MODEL(irq) ? ALL_CPU_MASK : cm); + GIC_DIST_CLEAR_PENDING(irq, GIC_DIST_TEST_MODEL(irq) ? ALL_CPU_MASK + : cm); ret = irq; } else { if (irq < GIC_NR_SGIS) { @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) src = ctz32(s->sgi_pending[irq][cpu]); s->sgi_pending[irq][cpu] &= ~(1 << src); if (s->sgi_pending[irq][cpu] == 0) { - GIC_CLEAR_PENDING(irq, GIC_TEST_MODEL(irq) ? ALL_CPU_MASK : cm); + GIC_DIST_CLEAR_PENDING(irq, + GIC_DIST_TEST_MODEL(irq) ? ALL_CPU_MASK + : cm); } ret = irq | ((src & 0x7) << 10); } else { @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) * interrupts. (level triggered interrupts with an active line * remain pending, see gic_test_pending) */ - GIC_CLEAR_PENDING(irq, GIC_TEST_MODEL(irq) ? ALL_CPU_MASK : cm); + GIC_DIST_CLEAR_PENDING(irq, GIC_DIST_TEST_MODEL(irq) ? ALL_CPU_MASK + : cm); ret = irq; } } @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) return ret; } -void gic_set_priority(GICState *s, int cpu, int irq, uint8_t val, +void gic_dist_set_priority(GICState *s, int cpu, int irq, uint8_t val, MemTxAttrs attrs) { if (s->security_extn && !attrs.secure) { - if (!GIC_TEST_GROUP(irq, (1 << cpu))) { + if (!GIC_DIST_TEST_GROUP(irq, (1 << cpu))) { return; /* Ignore Non-secure access of Group0 IRQ */ } val = 0x80 | (val >> 1); /* Non-secure view */ @@ -XXX,XX +XXX,XX @@ void gic_set_priority(GICState *s, int cpu, int irq, uint8_t val, } } -static uint32_t gic_get_priority(GICState *s, int cpu, int irq, +static uint32_t gic_dist_get_priority(GICState *s, int cpu, int irq, MemTxAttrs attrs) { - uint32_t prio = GIC_GET_PRIORITY(irq, cpu); + uint32_t prio = GIC_DIST_GET_PRIORITY(irq, cpu); if (s->security_extn && !attrs.secure) { - if (!GIC_TEST_GROUP(irq, (1 << cpu))) { + if (!GIC_DIST_TEST_GROUP(irq, (1 << cpu))) { return 0; /* Non-secure access cannot read priority of Group0 IRQ */ } prio = (prio << 1) & 0xff; /* Non-secure view */ @@ -XXX,XX +XXX,XX @@ static void gic_deactivate_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) return; } - group = gic_has_groups(s) && GIC_TEST_GROUP(irq, cm); + group = gic_has_groups(s) && GIC_DIST_TEST_GROUP(irq, cm); if (!gic_eoi_split(s, cpu, attrs)) { /* This is UNPREDICTABLE; we choose to ignore it */ @@ -XXX,XX +XXX,XX @@ static void gic_deactivate_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) return; } - GIC_CLEAR_ACTIVE(irq, cm); + GIC_DIST_CLEAR_ACTIVE(irq, cm); } void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) @@ -XXX,XX +XXX,XX @@ void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) if (s->revision == REV_11MPCORE) { /* Mark level triggered interrupts as pending if they are still raised. */ - if (!GIC_TEST_EDGE_TRIGGER(irq) && GIC_TEST_ENABLED(irq, cm) - && GIC_TEST_LEVEL(irq, cm) && (GIC_TARGET(irq) & cm) != 0) { + if (!GIC_DIST_TEST_EDGE_TRIGGER(irq) && GIC_DIST_TEST_ENABLED(irq, cm) + && GIC_DIST_TEST_LEVEL(irq, cm) + && (GIC_DIST_TARGET(irq) & cm) != 0) { DPRINTF("Set %d pending mask %x\n", irq, cm); - GIC_SET_PENDING(irq, cm); + GIC_DIST_SET_PENDING(irq, cm); } } - group = gic_has_groups(s) && GIC_TEST_GROUP(irq, cm); + group = gic_has_groups(s) && GIC_DIST_TEST_GROUP(irq, cm); if (s->security_extn && !attrs.secure && !group) { DPRINTF("Non-secure EOI for Group0 interrupt %d ignored\n", irq); @@ -XXX,XX +XXX,XX @@ void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) /* In GICv2 the guest can choose to split priority-drop and deactivate */ if (!gic_eoi_split(s, cpu, attrs)) { - GIC_CLEAR_ACTIVE(irq, cm); + GIC_DIST_CLEAR_ACTIVE(irq, cm); } gic_update(s); } @@ -XXX,XX +XXX,XX @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs) goto bad_reg; } for (i = 0; i < 8; i++) { - if (GIC_TEST_GROUP(irq + i, cm)) { + if (GIC_DIST_TEST_GROUP(irq + i, cm)) { res |= (1 << i); } } @@ -XXX,XX +XXX,XX @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs) res = 0; for (i = 0; i < 8; i++) { if (s->security_extn && !attrs.secure && - !GIC_TEST_GROUP(irq + i, 1 << cpu)) { + !GIC_DIST_TEST_GROUP(irq + i, 1 << cpu)) { continue; /* Ignore Non-secure access of Group0 IRQ */ } - if (GIC_TEST_ENABLED(irq + i, cm)) { + if (GIC_DIST_TEST_ENABLED(irq + i, cm)) { res |= (1 << i); } } @@ -XXX,XX +XXX,XX @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs) mask = (irq < GIC_INTERNAL) ? cm : ALL_CPU_MASK; for (i = 0; i < 8; i++) { if (s->security_extn && !attrs.secure && - !GIC_TEST_GROUP(irq + i, 1 << cpu)) { + !GIC_DIST_TEST_GROUP(irq + i, 1 << cpu)) { continue; /* Ignore Non-secure access of Group0 IRQ */ } @@ -XXX,XX +XXX,XX @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs) mask = (irq < GIC_INTERNAL) ? cm : ALL_CPU_MASK; for (i = 0; i < 8; i++) { if (s->security_extn && !attrs.secure && - !GIC_TEST_GROUP(irq + i, 1 << cpu)) { + !GIC_DIST_TEST_GROUP(irq + i, 1 << cpu)) { continue; /* Ignore Non-secure access of Group0 IRQ */ } - if (GIC_TEST_ACTIVE(irq + i, mask)) { + if (GIC_DIST_TEST_ACTIVE(irq + i, mask)) { res |= (1 << i); } } @@ -XXX,XX +XXX,XX @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs) irq = (offset - 0x400) + GIC_BASE_IRQ; if (irq >= s->num_irq) goto bad_reg; - res = gic_get_priority(s, cpu, irq, attrs); + res = gic_dist_get_priority(s, cpu, irq, attrs); } else if (offset < 0xc00) { /* Interrupt CPU Target. */ if (s->num_cpu == 1 && s->revision != REV_11MPCORE) { @@ -XXX,XX +XXX,XX @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs) } else if (irq < GIC_INTERNAL) { res = cm; } else { - res = GIC_TARGET(irq); + res = GIC_DIST_TARGET(irq); } } } else if (offset < 0xf00) { @@ -XXX,XX +XXX,XX @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs) res = 0; for (i = 0; i < 4; i++) { if (s->security_extn && !attrs.secure && - !GIC_TEST_GROUP(irq + i, 1 << cpu)) { + !GIC_DIST_TEST_GROUP(irq + i, 1 << cpu)) { continue; /* Ignore Non-secure access of Group0 IRQ */ } - if (GIC_TEST_MODEL(irq + i)) + if (GIC_DIST_TEST_MODEL(irq + i)) { res |= (1 << (i * 2)); - if (GIC_TEST_EDGE_TRIGGER(irq + i)) + } + if (GIC_DIST_TEST_EDGE_TRIGGER(irq + i)) { res |= (2 << (i * 2)); + } } } else if (offset < 0xf10) { goto bad_reg; @@ -XXX,XX +XXX,XX @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs) } if (s->security_extn && !attrs.secure && - !GIC_TEST_GROUP(irq, 1 << cpu)) { + !GIC_DIST_TEST_GROUP(irq, 1 << cpu)) { res = 0; /* Ignore Non-secure access of Group0 IRQ */ } else { res = s->sgi_pending[irq][cpu]; @@ -XXX,XX +XXX,XX @@ static void gic_dist_writeb(void *opaque, hwaddr offset, int cm = (irq < GIC_INTERNAL) ? (1 << cpu) : ALL_CPU_MASK; if (value & (1 << i)) { /* Group1 (Non-secure) */ - GIC_SET_GROUP(irq + i, cm); + GIC_DIST_SET_GROUP(irq + i, cm); } else { /* Group0 (Secure) */ - GIC_CLEAR_GROUP(irq + i, cm); + GIC_DIST_CLEAR_GROUP(irq + i, cm); } } } @@ -XXX,XX +XXX,XX @@ static void gic_dist_writeb(void *opaque, hwaddr offset, for (i = 0; i < 8; i++) { if (value & (1 << i)) { int mask = - (irq < GIC_INTERNAL) ? (1 << cpu) : GIC_TARGET(irq + i); + (irq < GIC_INTERNAL) ? (1 << cpu) + : GIC_DIST_TARGET(irq + i); int cm = (irq < GIC_INTERNAL) ? (1 << cpu) : ALL_CPU_MASK; if (s->security_extn && !attrs.secure && - !GIC_TEST_GROUP(irq + i, 1 << cpu)) { + !GIC_DIST_TEST_GROUP(irq + i, 1 << cpu)) { continue; /* Ignore Non-secure access of Group0 IRQ */ } - if (!GIC_TEST_ENABLED(irq + i, cm)) { + if (!GIC_DIST_TEST_ENABLED(irq + i, cm)) { DPRINTF("Enabled IRQ %d\n", irq + i); trace_gic_enable_irq(irq + i); } - GIC_SET_ENABLED(irq + i, cm); + GIC_DIST_SET_ENABLED(irq + i, cm); /* If a raised level triggered IRQ enabled then mark is as pending. */ - if (GIC_TEST_LEVEL(irq + i, mask) - && !GIC_TEST_EDGE_TRIGGER(irq + i)) { + if (GIC_DIST_TEST_LEVEL(irq + i, mask) + && !GIC_DIST_TEST_EDGE_TRIGGER(irq + i)) { DPRINTF("Set %d pending mask %x\n", irq + i, mask); - GIC_SET_PENDING(irq + i, mask); + GIC_DIST_SET_PENDING(irq + i, mask); } } } @@ -XXX,XX +XXX,XX @@ static void gic_dist_writeb(void *opaque, hwaddr offset, int cm = (irq < GIC_INTERNAL) ? (1 << cpu) : ALL_CPU_MASK; if (s->security_extn && !attrs.secure && - !GIC_TEST_GROUP(irq + i, 1 << cpu)) { + !GIC_DIST_TEST_GROUP(irq + i, 1 << cpu)) { continue; /* Ignore Non-secure access of Group0 IRQ */ } - if (GIC_TEST_ENABLED(irq + i, cm)) { + if (GIC_DIST_TEST_ENABLED(irq + i, cm)) { DPRINTF("Disabled IRQ %d\n", irq + i); trace_gic_disable_irq(irq + i); } - GIC_CLEAR_ENABLED(irq + i, cm); + GIC_DIST_CLEAR_ENABLED(irq + i, cm); } } } else if (offset < 0x280) { @@ -XXX,XX +XXX,XX @@ static void gic_dist_writeb(void *opaque, hwaddr offset, for (i = 0; i < 8; i++) { if (value & (1 << i)) { if (s->security_extn && !attrs.secure && - !GIC_TEST_GROUP(irq + i, 1 << cpu)) { + !GIC_DIST_TEST_GROUP(irq + i, 1 << cpu)) { continue; /* Ignore Non-secure access of Group0 IRQ */ } - GIC_SET_PENDING(irq + i, GIC_TARGET(irq + i)); + GIC_DIST_SET_PENDING(irq + i, GIC_DIST_TARGET(irq + i)); } } } else if (offset < 0x300) { @@ -XXX,XX +XXX,XX @@ static void gic_dist_writeb(void *opaque, hwaddr offset, for (i = 0; i < 8; i++) { if (s->security_extn && !attrs.secure && - !GIC_TEST_GROUP(irq + i, 1 << cpu)) { + !GIC_DIST_TEST_GROUP(irq + i, 1 << cpu)) { continue; /* Ignore Non-secure access of Group0 IRQ */ } @@ -XXX,XX +XXX,XX @@ static void gic_dist_writeb(void *opaque, hwaddr offset, for per-CPU interrupts. It's unclear whether this is the corect behavior. */ if (value & (1 << i)) { - GIC_CLEAR_PENDING(irq + i, ALL_CPU_MASK); + GIC_DIST_CLEAR_PENDING(irq + i, ALL_CPU_MASK); } } } else if (offset < 0x400) { @@ -XXX,XX +XXX,XX @@ static void gic_dist_writeb(void *opaque, hwaddr offset, irq = (offset - 0x400) + GIC_BASE_IRQ; if (irq >= s->num_irq) goto bad_reg; - gic_set_priority(s, cpu, irq, value, attrs); + gic_dist_set_priority(s, cpu, irq, value, attrs); } else if (offset < 0xc00) { /* Interrupt CPU Target. RAZ/WI on uniprocessor GICs, with the * annoying exception of the 11MPCore's GIC. @@ -XXX,XX +XXX,XX @@ static void gic_dist_writeb(void *opaque, hwaddr offset, value |= 0xaa; for (i = 0; i < 4; i++) { if (s->security_extn && !attrs.secure && - !GIC_TEST_GROUP(irq + i, 1 << cpu)) { + !GIC_DIST_TEST_GROUP(irq + i, 1 << cpu)) { continue; /* Ignore Non-secure access of Group0 IRQ */ } if (s->revision == REV_11MPCORE) { if (value & (1 << (i * 2))) { - GIC_SET_MODEL(irq + i); + GIC_DIST_SET_MODEL(irq + i); } else { - GIC_CLEAR_MODEL(irq + i); + GIC_DIST_CLEAR_MODEL(irq + i); } } if (value & (2 << (i * 2))) { - GIC_SET_EDGE_TRIGGER(irq + i); + GIC_DIST_SET_EDGE_TRIGGER(irq + i); } else { - GIC_CLEAR_EDGE_TRIGGER(irq + i); + GIC_DIST_CLEAR_EDGE_TRIGGER(irq + i); } } } else if (offset < 0xf10) { @@ -XXX,XX +XXX,XX @@ static void gic_dist_writeb(void *opaque, hwaddr offset, irq = (offset - 0xf10); if (!s->security_extn || attrs.secure || - GIC_TEST_GROUP(irq, 1 << cpu)) { + GIC_DIST_TEST_GROUP(irq, 1 << cpu)) { s->sgi_pending[irq][cpu] &= ~value; if (s->sgi_pending[irq][cpu] == 0) { - GIC_CLEAR_PENDING(irq, 1 << cpu); + GIC_DIST_CLEAR_PENDING(irq, 1 << cpu); } } } else if (offset < 0xf30) { @@ -XXX,XX +XXX,XX @@ static void gic_dist_writeb(void *opaque, hwaddr offset, irq = (offset - 0xf20); if (!s->security_extn || attrs.secure || - GIC_TEST_GROUP(irq, 1 << cpu)) { - GIC_SET_PENDING(irq, 1 << cpu); + GIC_DIST_TEST_GROUP(irq, 1 << cpu)) { + GIC_DIST_SET_PENDING(irq, 1 << cpu); s->sgi_pending[irq][cpu] |= value; } } else { @@ -XXX,XX +XXX,XX @@ static void gic_dist_writel(void *opaque, hwaddr offset, mask = ALL_CPU_MASK; break; } - GIC_SET_PENDING(irq, mask); + GIC_DIST_SET_PENDING(irq, mask); target_cpu = ctz32(mask); while (target_cpu < GIC_NCPU) { s->sgi_pending[irq][target_cpu] |= (1 << cpu); diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_common.c +++ b/hw/intc/arm_gic_common.c @@ -XXX,XX +XXX,XX @@ static void arm_gic_common_reset(DeviceState *dev) } } for (i = 0; i < GIC_NR_SGIS; i++) { - GIC_SET_ENABLED(i, ALL_CPU_MASK); - GIC_SET_EDGE_TRIGGER(i); + GIC_DIST_SET_ENABLED(i, ALL_CPU_MASK); + GIC_DIST_SET_EDGE_TRIGGER(i); } for (i = 0; i < ARRAY_SIZE(s->priority2); i++) { @@ -XXX,XX +XXX,XX @@ static void arm_gic_common_reset(DeviceState *dev) } if (s->security_extn && s->irq_reset_nonsecure) { for (i = 0; i < GIC_MAXIRQ; i++) { - GIC_SET_GROUP(i, ALL_CPU_MASK); + GIC_DIST_SET_GROUP(i, ALL_CPU_MASK); } } diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_kvm.c +++ b/hw/intc/arm_gic_kvm.c @@ -XXX,XX +XXX,XX @@ static void translate_group(GICState *s, int irq, int cpu, int cm = (irq < GIC_INTERNAL) ? (1 << cpu) : ALL_CPU_MASK; if (to_kernel) { - *field = GIC_TEST_GROUP(irq, cm); + *field = GIC_DIST_TEST_GROUP(irq, cm); } else { if (*field & 1) { - GIC_SET_GROUP(irq, cm); + GIC_DIST_SET_GROUP(irq, cm); } } } @@ -XXX,XX +XXX,XX @@ static void translate_enabled(GICState *s, int irq, int cpu, int cm = (irq < GIC_INTERNAL) ? (1 << cpu) : ALL_CPU_MASK; if (to_kernel) { - *field = GIC_TEST_ENABLED(irq, cm); + *field = GIC_DIST_TEST_ENABLED(irq, cm); } else { if (*field & 1) { - GIC_SET_ENABLED(irq, cm); + GIC_DIST_SET_ENABLED(irq, cm); } } } @@ -XXX,XX +XXX,XX @@ static void translate_pending(GICState *s, int irq, int cpu, *field = gic_test_pending(s, irq, cm); } else { if (*field & 1) { - GIC_SET_PENDING(irq, cm); + GIC_DIST_SET_PENDING(irq, cm); /* TODO: Capture is level-line is held high in the kernel */ } } @@ -XXX,XX +XXX,XX @@ static void translate_active(GICState *s, int irq, int cpu, int cm = (irq < GIC_INTERNAL) ? (1 << cpu) : ALL_CPU_MASK; if (to_kernel) { - *field = GIC_TEST_ACTIVE(irq, cm); + *field = GIC_DIST_TEST_ACTIVE(irq, cm); } else { if (*field & 1) { - GIC_SET_ACTIVE(irq, cm); + GIC_DIST_SET_ACTIVE(irq, cm); } } } @@ -XXX,XX +XXX,XX @@ static void translate_trigger(GICState *s, int irq, int cpu, uint32_t *field, bool to_kernel) { if (to_kernel) { - *field = (GIC_TEST_EDGE_TRIGGER(irq)) ? 0x2 : 0x0; + *field = (GIC_DIST_TEST_EDGE_TRIGGER(irq)) ? 0x2 : 0x0; } else { if (*field & 0x2) { - GIC_SET_EDGE_TRIGGER(irq); + GIC_DIST_SET_EDGE_TRIGGER(irq); } } } @@ -XXX,XX +XXX,XX @@ static void translate_priority(GICState *s, int irq, int cpu, uint32_t *field, bool to_kernel) { if (to_kernel) { - *field = GIC_GET_PRIORITY(irq, cpu) & 0xff; + *field = GIC_DIST_GET_PRIORITY(irq, cpu) & 0xff; } else { - gic_set_priority(s, cpu, irq, *field & 0xff, MEMTXATTRS_UNSPECIFIED); + gic_dist_set_priority(s, cpu, irq, + *field & 0xff, MEMTXATTRS_UNSPECIFIED); } } -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Implement GICD_ISACTIVERn and GICD_ICACTIVERn registers in the GICv2. Those registers allow to set or clear the active state of an IRQ in the distributor. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-3-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 61 +++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 57 insertions(+), 4 deletions(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs) } } } else if (offset < 0x400) { - /* Interrupt Active. */ - irq = (offset - 0x300) * 8 + GIC_BASE_IRQ; + /* Interrupt Set/Clear Active. */ + if (offset < 0x380) { + irq = (offset - 0x300) * 8; + } else if (s->revision == 2) { + irq = (offset - 0x380) * 8; + } else { + goto bad_reg; + } + + irq += GIC_BASE_IRQ; if (irq >= s->num_irq) goto bad_reg; res = 0; @@ -XXX,XX +XXX,XX @@ static void gic_dist_writeb(void *opaque, hwaddr offset, GIC_DIST_CLEAR_PENDING(irq + i, ALL_CPU_MASK); } } + } else if (offset < 0x380) { + /* Interrupt Set Active. */ + if (s->revision != 2) { + goto bad_reg; + } + + irq = (offset - 0x300) * 8 + GIC_BASE_IRQ; + if (irq >= s->num_irq) { + goto bad_reg; + } + + /* This register is banked per-cpu for PPIs */ + int cm = irq < GIC_INTERNAL ? (1 << cpu) : ALL_CPU_MASK; + + for (i = 0; i < 8; i++) { + if (s->security_extn && !attrs.secure && + !GIC_DIST_TEST_GROUP(irq + i, 1 << cpu)) { + continue; /* Ignore Non-secure access of Group0 IRQ */ + } + + if (value & (1 << i)) { + GIC_DIST_SET_ACTIVE(irq + i, cm); + } + } } else if (offset < 0x400) { - /* Interrupt Active. */ - goto bad_reg; + /* Interrupt Clear Active. */ + if (s->revision != 2) { + goto bad_reg; + } + + irq = (offset - 0x380) * 8 + GIC_BASE_IRQ; + if (irq >= s->num_irq) { + goto bad_reg; + } + + /* This register is banked per-cpu for PPIs */ + int cm = irq < GIC_INTERNAL ? (1 << cpu) : ALL_CPU_MASK; + + for (i = 0; i < 8; i++) { + if (s->security_extn && !attrs.secure && + !GIC_DIST_TEST_GROUP(irq + i, 1 << cpu)) { + continue; /* Ignore Non-secure access of Group0 IRQ */ + } + + if (value & (1 << i)) { + GIC_DIST_CLEAR_ACTIVE(irq + i, cm); + } + } } else if (offset < 0x800) { /* Interrupt Priority. */ irq = (offset - 0x400) + GIC_BASE_IRQ; -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Some functions are now only used in arm_gic.c, put them static. Some of them where only used by the NVIC implementation and are not used anymore, so remove them. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-4-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gic_internal.h | 4 ---- hw/intc/arm_gic.c | 23 ++--------------------- 2 files changed, 2 insertions(+), 25 deletions(-) diff --git a/hw/intc/gic_internal.h b/hw/intc/gic_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gic_internal.h +++ b/hw/intc/gic_internal.h @@ -XXX,XX +XXX,XX @@ /* The special cases for the revision property: */ #define REV_11MPCORE 0 -void gic_set_pending_private(GICState *s, int cpu, int irq); uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs); -void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs); -void gic_update(GICState *s); -void gic_init_irqs_and_distributor(GICState *s); void gic_dist_set_priority(GICState *s, int cpu, int irq, uint8_t val, MemTxAttrs attrs); diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static inline bool gic_has_groups(GICState *s) /* TODO: Many places that call this routine could be optimized. */ /* Update interrupt status after enabled or pending bits have been changed. */ -void gic_update(GICState *s) +static void gic_update(GICState *s) { int best_irq; int best_prio; @@ -XXX,XX +XXX,XX @@ void gic_update(GICState *s) } } -void gic_set_pending_private(GICState *s, int cpu, int irq) -{ - int cm = 1 << cpu; - - if (gic_test_pending(s, irq, cm)) { - return; - } - - DPRINTF("Set %d pending cpu %d\n", irq, cpu); - GIC_DIST_SET_PENDING(irq, cm); - gic_update(s); -} - static void gic_set_irq_11mpcore(GICState *s, int irq, int level, int cm, int target) { @@ -XXX,XX +XXX,XX @@ static void gic_deactivate_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) GIC_DIST_CLEAR_ACTIVE(irq, cm); } -void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) +static void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) { int cm = 1 << cpu; int group; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps gic_cpu_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -/* This function is used by nvic model */ -void gic_init_irqs_and_distributor(GICState *s) -{ - gic_init_irqs_and_mmio(s, gic_set_irq, gic_ops); -} - static void arm_gic_realize(DeviceState *dev, Error **errp) { /* Device instance realize function for the GIC sysbus device */ -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Provide a VMSTATE_UINT16_SUB_ARRAY macro to save a uint16_t sub-array in a VMState. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180727095421.386-5-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/migration/vmstate.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h index XXXXXXX..XXXXXXX 100644 --- a/include/migration/vmstate.h +++ b/include/migration/vmstate.h @@ -XXX,XX +XXX,XX @@ extern const VMStateInfo vmstate_info_qtailq; #define VMSTATE_UINT16_ARRAY(_f, _s, _n) \ VMSTATE_UINT16_ARRAY_V(_f, _s, _n, 0) +#define VMSTATE_UINT16_SUB_ARRAY(_f, _s, _start, _num) \ + VMSTATE_SUB_ARRAY(_f, _s, _start, _num, 0, vmstate_info_uint16, uint16_t) + #define VMSTATE_UINT16_2DARRAY(_f, _s, _n1, _n2) \ VMSTATE_UINT16_2DARRAY_V(_f, _s, _n1, _n2, 0) -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Add the necessary parts of the virtualization extensions state to the GIC state. We choose to increase the size of the CPU interfaces state to add space for the vCPU interfaces (the GIC_NCPU_VCPU macro). This way, we'll be able to reuse most of the CPU interface code for the vCPUs. The only exception is the APR value, which is stored in h_apr in the virtual interface state for vCPUs. This is due to some complications with the GIC VMState, for which we don't want to break backward compatibility. APRs being stored in 2D arrays, increasing the second dimension would lead to some ugly VMState description. To avoid that, we keep it in h_apr for vCPUs. The vCPUs are numbered from GIC_NCPU to (GIC_NCPU * 2) - 1. The `gic_is_vcpu` function help to determine if a given CPU id correspond to a physical CPU or a virtual one. For the in-kernel KVM VGIC, since the exposed VGIC does not implement the virtualization extensions, we report an error if the corresponding property is set to true. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-6-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gic_internal.h | 5 ++ include/hw/intc/arm_gic_common.h | 43 +++++++-- hw/intc/arm_gic.c | 2 +- hw/intc/arm_gic_common.c | 148 ++++++++++++++++++++++++++----- hw/intc/arm_gic_kvm.c | 8 +- 5 files changed, 173 insertions(+), 33 deletions(-) diff --git a/hw/intc/gic_internal.h b/hw/intc/gic_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gic_internal.h +++ b/hw/intc/gic_internal.h @@ -XXX,XX +XXX,XX @@ static inline bool gic_test_pending(GICState *s, int irq, int cm) } } +static inline bool gic_is_vcpu(int cpu) +{ + return cpu >= GIC_NCPU; +} + #endif /* QEMU_ARM_GIC_INTERNAL_H */ diff --git a/include/hw/intc/arm_gic_common.h b/include/hw/intc/arm_gic_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gic_common.h +++ b/include/hw/intc/arm_gic_common.h @@ -XXX,XX +XXX,XX @@ #define GIC_NR_SGIS 16 /* Maximum number of possible CPU interfaces, determined by GIC architecture */ #define GIC_NCPU 8 +/* Maximum number of possible CPU interfaces with their respective vCPU */ +#define GIC_NCPU_VCPU (GIC_NCPU * 2) #define MAX_NR_GROUP_PRIO 128 #define GIC_NR_APRS (MAX_NR_GROUP_PRIO / 32) @@ -XXX,XX +XXX,XX @@ #define GIC_MIN_BPR 0 #define GIC_MIN_ABPR (GIC_MIN_BPR + 1) +/* Architectural maximum number of list registers in the virtual interface */ +#define GIC_MAX_LR 64 + +/* Only 32 priority levels and 32 preemption levels in the vCPU interfaces */ +#define GIC_VIRT_MAX_GROUP_PRIO_BITS 5 +#define GIC_VIRT_MAX_NR_GROUP_PRIO (1 << GIC_VIRT_MAX_GROUP_PRIO_BITS) +#define GIC_VIRT_NR_APRS (GIC_VIRT_MAX_NR_GROUP_PRIO / 32) + +#define GIC_VIRT_MIN_BPR 2 +#define GIC_VIRT_MIN_ABPR (GIC_VIRT_MIN_BPR + 1) + typedef struct gic_irq_state { /* The enable bits are only banked for per-cpu interrupts. */ uint8_t enabled; @@ -XXX,XX +XXX,XX @@ typedef struct GICState { qemu_irq parent_fiq[GIC_NCPU]; qemu_irq parent_virq[GIC_NCPU]; qemu_irq parent_vfiq[GIC_NCPU]; + qemu_irq maintenance_irq[GIC_NCPU]; + /* GICD_CTLR; for a GIC with the security extensions the NS banked version * of this register is just an alias of bit 1 of the S banked version. */ @@ -XXX,XX +XXX,XX @@ typedef struct GICState { /* GICC_CTLR; again, the NS banked version is just aliases of bits of * the S banked register, so our state only needs to store the S version. */ - uint32_t cpu_ctlr[GIC_NCPU]; + uint32_t cpu_ctlr[GIC_NCPU_VCPU]; gic_irq_state irq_state[GIC_MAXIRQ]; uint8_t irq_target[GIC_MAXIRQ]; @@ -XXX,XX +XXX,XX @@ typedef struct GICState { */ uint8_t sgi_pending[GIC_NR_SGIS][GIC_NCPU]; - uint16_t priority_mask[GIC_NCPU]; - uint16_t running_priority[GIC_NCPU]; - uint16_t current_pending[GIC_NCPU]; + uint16_t priority_mask[GIC_NCPU_VCPU]; + uint16_t running_priority[GIC_NCPU_VCPU]; + uint16_t current_pending[GIC_NCPU_VCPU]; /* If we present the GICv2 without security extensions to a guest, * the guest can configure the GICC_CTLR to configure group 1 binary point @@ -XXX,XX +XXX,XX @@ typedef struct GICState { * For a GIC with Security Extensions we use use bpr for the * secure copy and abpr as storage for the non-secure copy of the register. */ - uint8_t bpr[GIC_NCPU]; - uint8_t abpr[GIC_NCPU]; + uint8_t bpr[GIC_NCPU_VCPU]; + uint8_t abpr[GIC_NCPU_VCPU]; /* The APR is implementation defined, so we choose a layout identical to * the KVM ABI layout for QEMU's implementation of the gic: @@ -XXX,XX +XXX,XX @@ typedef struct GICState { uint32_t apr[GIC_NR_APRS][GIC_NCPU]; uint32_t nsapr[GIC_NR_APRS][GIC_NCPU]; + /* Virtual interface control registers */ + uint32_t h_hcr[GIC_NCPU]; + uint32_t h_misr[GIC_NCPU]; + uint32_t h_lr[GIC_MAX_LR][GIC_NCPU]; + uint32_t h_apr[GIC_NCPU]; + + /* Number of LRs implemented in this GIC instance */ + uint32_t num_lrs; + uint32_t num_cpu; MemoryRegion iomem; /* Distributor */ @@ -XXX,XX +XXX,XX @@ typedef struct GICState { */ struct GICState *backref[GIC_NCPU]; MemoryRegion cpuiomem[GIC_NCPU + 1]; /* CPU interfaces */ + MemoryRegion vifaceiomem[GIC_NCPU + 1]; /* Virtual interfaces */ + MemoryRegion vcpuiomem; /* vCPU interface */ + uint32_t num_irq; uint32_t revision; bool security_extn; + bool virt_extn; bool irq_reset_nonsecure; /* configure IRQs as group 1 (NS) on reset? */ int dev_fd; /* kvm device fd if backed by kvm vgic support */ Error *migration_blocker; @@ -XXX,XX +XXX,XX @@ typedef struct ARMGICCommonClass { } ARMGICCommonClass; void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler, - const MemoryRegionOps *ops); + const MemoryRegionOps *ops, + const MemoryRegionOps *virt_ops); #endif diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static void arm_gic_realize(DeviceState *dev, Error **errp) } /* This creates distributor and main CPU interface (s->cpuiomem[0]) */ - gic_init_irqs_and_mmio(s, gic_set_irq, gic_ops); + gic_init_irqs_and_mmio(s, gic_set_irq, gic_ops, NULL); /* Extra core-specific regions for the CPU interfaces. This is * necessary for "franken-GIC" implementations, for example on diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_common.c +++ b/hw/intc/arm_gic_common.c @@ -XXX,XX +XXX,XX @@ static int gic_post_load(void *opaque, int version_id) return 0; } +static bool gic_virt_state_needed(void *opaque) +{ + GICState *s = (GICState *)opaque; + + return s->virt_extn; +} + static const VMStateDescription vmstate_gic_irq_state = { .name = "arm_gic_irq_state", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gic_irq_state = { } }; +static const VMStateDescription vmstate_gic_virt_state = { + .name = "arm_gic_virt_state", + .version_id = 1, + .minimum_version_id = 1, + .needed = gic_virt_state_needed, + .fields = (VMStateField[]) { + /* Virtual interface */ + VMSTATE_UINT32_ARRAY(h_hcr, GICState, GIC_NCPU), + VMSTATE_UINT32_ARRAY(h_misr, GICState, GIC_NCPU), + VMSTATE_UINT32_2DARRAY(h_lr, GICState, GIC_MAX_LR, GIC_NCPU), + VMSTATE_UINT32_ARRAY(h_apr, GICState, GIC_NCPU), + + /* Virtual CPU interfaces */ + VMSTATE_UINT32_SUB_ARRAY(cpu_ctlr, GICState, GIC_NCPU, GIC_NCPU), + VMSTATE_UINT16_SUB_ARRAY(priority_mask, GICState, GIC_NCPU, GIC_NCPU), + VMSTATE_UINT16_SUB_ARRAY(running_priority, GICState, GIC_NCPU, GIC_NCPU), + VMSTATE_UINT16_SUB_ARRAY(current_pending, GICState, GIC_NCPU, GIC_NCPU), + VMSTATE_UINT8_SUB_ARRAY(bpr, GICState, GIC_NCPU, GIC_NCPU), + VMSTATE_UINT8_SUB_ARRAY(abpr, GICState, GIC_NCPU, GIC_NCPU), + + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_gic = { .name = "arm_gic", .version_id = 12, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gic = { .post_load = gic_post_load, .fields = (VMStateField[]) { VMSTATE_UINT32(ctlr, GICState), - VMSTATE_UINT32_ARRAY(cpu_ctlr, GICState, GIC_NCPU), + VMSTATE_UINT32_SUB_ARRAY(cpu_ctlr, GICState, 0, GIC_NCPU), VMSTATE_STRUCT_ARRAY(irq_state, GICState, GIC_MAXIRQ, 1, vmstate_gic_irq_state, gic_irq_state), VMSTATE_UINT8_ARRAY(irq_target, GICState, GIC_MAXIRQ), VMSTATE_UINT8_2DARRAY(priority1, GICState, GIC_INTERNAL, GIC_NCPU), VMSTATE_UINT8_ARRAY(priority2, GICState, GIC_MAXIRQ - GIC_INTERNAL), VMSTATE_UINT8_2DARRAY(sgi_pending, GICState, GIC_NR_SGIS, GIC_NCPU), - VMSTATE_UINT16_ARRAY(priority_mask, GICState, GIC_NCPU), - VMSTATE_UINT16_ARRAY(running_priority, GICState, GIC_NCPU), - VMSTATE_UINT16_ARRAY(current_pending, GICState, GIC_NCPU), - VMSTATE_UINT8_ARRAY(bpr, GICState, GIC_NCPU), - VMSTATE_UINT8_ARRAY(abpr, GICState, GIC_NCPU), + VMSTATE_UINT16_SUB_ARRAY(priority_mask, GICState, 0, GIC_NCPU), + VMSTATE_UINT16_SUB_ARRAY(running_priority, GICState, 0, GIC_NCPU), + VMSTATE_UINT16_SUB_ARRAY(current_pending, GICState, 0, GIC_NCPU), + VMSTATE_UINT8_SUB_ARRAY(bpr, GICState, 0, GIC_NCPU), + VMSTATE_UINT8_SUB_ARRAY(abpr, GICState, 0, GIC_NCPU), VMSTATE_UINT32_2DARRAY(apr, GICState, GIC_NR_APRS, GIC_NCPU), VMSTATE_UINT32_2DARRAY(nsapr, GICState, GIC_NR_APRS, GIC_NCPU), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * []) { + &vmstate_gic_virt_state, + NULL } }; void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler, - const MemoryRegionOps *ops) + const MemoryRegionOps *ops, + const MemoryRegionOps *virt_ops) { SysBusDevice *sbd = SYS_BUS_DEVICE(s); int i = s->num_irq - GIC_INTERNAL; @@ -XXX,XX +XXX,XX @@ void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler, for (i = 0; i < s->num_cpu; i++) { sysbus_init_irq(sbd, &s->parent_vfiq[i]); } + if (s->virt_extn) { + for (i = 0; i < s->num_cpu; i++) { + sysbus_init_irq(sbd, &s->maintenance_irq[i]); + } + } /* Distributor */ memory_region_init_io(&s->iomem, OBJECT(s), ops, s, "gic_dist", 0x1000); @@ -XXX,XX +XXX,XX @@ void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler, memory_region_init_io(&s->cpuiomem[0], OBJECT(s), ops ? &ops[1] : NULL, s, "gic_cpu", s->revision == 2 ? 0x2000 : 0x100); sysbus_init_mmio(sbd, &s->cpuiomem[0]); + + if (s->virt_extn) { + memory_region_init_io(&s->vifaceiomem[0], OBJECT(s), virt_ops, + s, "gic_viface", 0x1000); + sysbus_init_mmio(sbd, &s->vifaceiomem[0]); + + memory_region_init_io(&s->vcpuiomem, OBJECT(s), + virt_ops ? &virt_ops[1] : NULL, + s, "gic_vcpu", 0x2000); + sysbus_init_mmio(sbd, &s->vcpuiomem); + } } static void arm_gic_common_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void arm_gic_common_realize(DeviceState *dev, Error **errp) "the security extensions"); return; } + + if (s->virt_extn) { + if (s->revision != 2) { + error_setg(errp, "GIC virtualization extensions are only " + "supported by revision 2"); + return; + } + + /* For now, set the number of implemented LRs to 4, as found in most + * real GICv2. This could be promoted as a QOM property if we need to + * emulate a variant with another num_lrs. + */ + s->num_lrs = 4; + } +} + +static inline void arm_gic_common_reset_irq_state(GICState *s, int first_cpu, + int resetprio) +{ + int i, j; + + for (i = first_cpu; i < first_cpu + s->num_cpu; i++) { + if (s->revision == REV_11MPCORE) { + s->priority_mask[i] = 0xf0; + } else { + s->priority_mask[i] = resetprio; + } + s->current_pending[i] = 1023; + s->running_priority[i] = 0x100; + s->cpu_ctlr[i] = 0; + s->bpr[i] = gic_is_vcpu(i) ? GIC_VIRT_MIN_BPR : GIC_MIN_BPR; + s->abpr[i] = gic_is_vcpu(i) ? GIC_VIRT_MIN_ABPR : GIC_MIN_ABPR; + + if (!gic_is_vcpu(i)) { + for (j = 0; j < GIC_INTERNAL; j++) { + s->priority1[j][i] = resetprio; + } + for (j = 0; j < GIC_NR_SGIS; j++) { + s->sgi_pending[j][i] = 0; + } + } + } } static void arm_gic_common_reset(DeviceState *dev) @@ -XXX,XX +XXX,XX @@ static void arm_gic_common_reset(DeviceState *dev) } memset(s->irq_state, 0, GIC_MAXIRQ * sizeof(gic_irq_state)); - for (i = 0 ; i < s->num_cpu; i++) { - if (s->revision == REV_11MPCORE) { - s->priority_mask[i] = 0xf0; - } else { - s->priority_mask[i] = resetprio; - } - s->current_pending[i] = 1023; - s->running_priority[i] = 0x100; - s->cpu_ctlr[i] = 0; - s->bpr[i] = GIC_MIN_BPR; - s->abpr[i] = GIC_MIN_ABPR; - for (j = 0; j < GIC_INTERNAL; j++) { - s->priority1[j][i] = resetprio; - } - for (j = 0; j < GIC_NR_SGIS; j++) { - s->sgi_pending[j][i] = 0; - } + arm_gic_common_reset_irq_state(s, 0, resetprio); + + if (s->virt_extn) { + /* vCPU states are stored at indexes GIC_NCPU .. GIC_NCPU+num_cpu. + * The exposed vCPU interface does not have security extensions. + */ + arm_gic_common_reset_irq_state(s, GIC_NCPU, 0); } + for (i = 0; i < GIC_NR_SGIS; i++) { GIC_DIST_SET_ENABLED(i, ALL_CPU_MASK); GIC_DIST_SET_EDGE_TRIGGER(i); @@ -XXX,XX +XXX,XX @@ static void arm_gic_common_reset(DeviceState *dev) } } + if (s->virt_extn) { + for (i = 0; i < s->num_lrs; i++) { + for (j = 0; j < s->num_cpu; j++) { + s->h_lr[i][j] = 0; + } + } + + for (i = 0; i < s->num_cpu; i++) { + s->h_hcr[i] = 0; + s->h_misr[i] = 0; + } + } + s->ctlr = 0; } @@ -XXX,XX +XXX,XX @@ static Property arm_gic_common_properties[] = { DEFINE_PROP_UINT32("revision", GICState, revision, 1), /* True if the GIC should implement the security extensions */ DEFINE_PROP_BOOL("has-security-extensions", GICState, security_extn, 0), + /* True if the GIC should implement the virtualization extensions */ + DEFINE_PROP_BOOL("has-virtualization-extensions", GICState, virt_extn, 0), DEFINE_PROP_END_OF_LIST(), }; diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_kvm.c +++ b/hw/intc/arm_gic_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp) return; } + if (s->virt_extn) { + error_setg(errp, "the in-kernel VGIC does not implement the " + "virtualization extensions"); + return; + } + if (!kvm_arm_gic_can_save_restore(s)) { error_setg(&s->migration_blocker, "This operating system kernel does " "not support vGICv2 migration"); @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp) } } - gic_init_irqs_and_mmio(s, kvm_arm_gicv2_set_irq, NULL); + gic_init_irqs_and_mmio(s, kvm_arm_gicv2_set_irq, NULL, NULL); for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) { qemu_irq irq = qdev_get_gpio_in(dev, i); -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Add the register definitions for the virtual interface of the GICv2. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-7-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gic_internal.h | 65 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) diff --git a/hw/intc/gic_internal.h b/hw/intc/gic_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gic_internal.h +++ b/hw/intc/gic_internal.h @@ -XXX,XX +XXX,XX @@ #ifndef QEMU_ARM_GIC_INTERNAL_H #define QEMU_ARM_GIC_INTERNAL_H +#include "hw/registerfields.h" #include "hw/intc/arm_gic.h" #define ALL_CPU_MASK ((unsigned)(((1 << GIC_NCPU) - 1))) @@ -XXX,XX +XXX,XX @@ #define GICC_CTLR_EOIMODE (1U << 9) #define GICC_CTLR_EOIMODE_NS (1U << 10) +REG32(GICH_HCR, 0x0) + FIELD(GICH_HCR, EN, 0, 1) + FIELD(GICH_HCR, UIE, 1, 1) + FIELD(GICH_HCR, LRENPIE, 2, 1) + FIELD(GICH_HCR, NPIE, 3, 1) + FIELD(GICH_HCR, VGRP0EIE, 4, 1) + FIELD(GICH_HCR, VGRP0DIE, 5, 1) + FIELD(GICH_HCR, VGRP1EIE, 6, 1) + FIELD(GICH_HCR, VGRP1DIE, 7, 1) + FIELD(GICH_HCR, EOICount, 27, 5) + +#define GICH_HCR_MASK \ + (R_GICH_HCR_EN_MASK | R_GICH_HCR_UIE_MASK | \ + R_GICH_HCR_LRENPIE_MASK | R_GICH_HCR_NPIE_MASK | \ + R_GICH_HCR_VGRP0EIE_MASK | R_GICH_HCR_VGRP0DIE_MASK | \ + R_GICH_HCR_VGRP1EIE_MASK | R_GICH_HCR_VGRP1DIE_MASK | \ + R_GICH_HCR_EOICount_MASK) + +REG32(GICH_VTR, 0x4) + FIELD(GICH_VTR, ListRegs, 0, 6) + FIELD(GICH_VTR, PREbits, 26, 3) + FIELD(GICH_VTR, PRIbits, 29, 3) + +REG32(GICH_VMCR, 0x8) + FIELD(GICH_VMCR, VMCCtlr, 0, 10) + FIELD(GICH_VMCR, VMABP, 18, 3) + FIELD(GICH_VMCR, VMBP, 21, 3) + FIELD(GICH_VMCR, VMPriMask, 27, 5) + +REG32(GICH_MISR, 0x10) + FIELD(GICH_MISR, EOI, 0, 1) + FIELD(GICH_MISR, U, 1, 1) + FIELD(GICH_MISR, LRENP, 2, 1) + FIELD(GICH_MISR, NP, 3, 1) + FIELD(GICH_MISR, VGrp0E, 4, 1) + FIELD(GICH_MISR, VGrp0D, 5, 1) + FIELD(GICH_MISR, VGrp1E, 6, 1) + FIELD(GICH_MISR, VGrp1D, 7, 1) + +REG32(GICH_EISR0, 0x20) +REG32(GICH_EISR1, 0x24) +REG32(GICH_ELRSR0, 0x30) +REG32(GICH_ELRSR1, 0x34) +REG32(GICH_APR, 0xf0) + +REG32(GICH_LR0, 0x100) + FIELD(GICH_LR0, VirtualID, 0, 10) + FIELD(GICH_LR0, PhysicalID, 10, 10) + FIELD(GICH_LR0, CPUID, 10, 3) + FIELD(GICH_LR0, EOI, 19, 1) + FIELD(GICH_LR0, Priority, 23, 5) + FIELD(GICH_LR0, State, 28, 2) + FIELD(GICH_LR0, Grp1, 30, 1) + FIELD(GICH_LR0, HW, 31, 1) + +/* Last LR register */ +REG32(GICH_LR63, 0x1fc) + +#define GICH_LR_MASK \ + (R_GICH_LR0_VirtualID_MASK | R_GICH_LR0_PhysicalID_MASK | \ + R_GICH_LR0_CPUID_MASK | R_GICH_LR0_EOI_MASK | \ + R_GICH_LR0_Priority_MASK | R_GICH_LR0_State_MASK | \ + R_GICH_LR0_Grp1_MASK | R_GICH_LR0_HW_MASK) + /* Valid bits for GICC_CTLR for GICv1, v1 with security extensions, * GICv2 and GICv2 with security extensions: */ -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Add some helper macros and functions related to the virtualization extensions to gic_internal.h. The GICH_LR_* macros help extracting specific fields of a list register value. The only tricky one is the priority field as only the MSB are stored. The value must be shifted accordingly to obtain the correct priority value. gic_is_vcpu() and gic_get_vcpu_real_id() help with (v)CPU id manipulation to abstract the fact that vCPU id are in the range [ GIC_NCPU; (GIC_NCPU + num_cpu) [. gic_lr_* and gic_virq_is_valid() help with the list registers. gic_get_lr_entry() returns the LR entry for a given (vCPU, irq) pair. It is meant to be used in contexts where we know for sure that the entry exists, so we assert that entry is actually found, and the caller can avoid the NULL check on the returned pointer. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-8-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gic_internal.h | 74 ++++++++++++++++++++++++++++++++++++++++++ hw/intc/arm_gic.c | 5 +++ 2 files changed, 79 insertions(+) diff --git a/hw/intc/gic_internal.h b/hw/intc/gic_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gic_internal.h +++ b/hw/intc/gic_internal.h @@ -XXX,XX +XXX,XX @@ REG32(GICH_LR63, 0x1fc) R_GICH_LR0_Priority_MASK | R_GICH_LR0_State_MASK | \ R_GICH_LR0_Grp1_MASK | R_GICH_LR0_HW_MASK) +#define GICH_LR_STATE_INVALID 0 +#define GICH_LR_STATE_PENDING 1 +#define GICH_LR_STATE_ACTIVE 2 +#define GICH_LR_STATE_ACTIVE_PENDING 3 + +#define GICH_LR_VIRT_ID(entry) (FIELD_EX32(entry, GICH_LR0, VirtualID)) +#define GICH_LR_PHYS_ID(entry) (FIELD_EX32(entry, GICH_LR0, PhysicalID)) +#define GICH_LR_CPUID(entry) (FIELD_EX32(entry, GICH_LR0, CPUID)) +#define GICH_LR_EOI(entry) (FIELD_EX32(entry, GICH_LR0, EOI)) +#define GICH_LR_PRIORITY(entry) (FIELD_EX32(entry, GICH_LR0, Priority) << 3) +#define GICH_LR_STATE(entry) (FIELD_EX32(entry, GICH_LR0, State)) +#define GICH_LR_GROUP(entry) (FIELD_EX32(entry, GICH_LR0, Grp1)) +#define GICH_LR_HW(entry) (FIELD_EX32(entry, GICH_LR0, HW)) + /* Valid bits for GICC_CTLR for GICv1, v1 with security extensions, * GICv2 and GICv2 with security extensions: */ @@ -XXX,XX +XXX,XX @@ static inline bool gic_is_vcpu(int cpu) return cpu >= GIC_NCPU; } +static inline int gic_get_vcpu_real_id(int cpu) +{ + return (cpu >= GIC_NCPU) ? (cpu - GIC_NCPU) : cpu; +} + +/* Return true if the given vIRQ state exists in a LR and is either active or + * pending and active. + * + * This function is used to check that a guest's `end of interrupt' or + * `interrupts deactivation' request is valid, and matches with a LR of an + * already acknowledged vIRQ (i.e. has the active bit set in its state). + */ +static inline bool gic_virq_is_valid(GICState *s, int irq, int vcpu) +{ + int cpu = gic_get_vcpu_real_id(vcpu); + int lr_idx; + + for (lr_idx = 0; lr_idx < s->num_lrs; lr_idx++) { + uint32_t *entry = &s->h_lr[lr_idx][cpu]; + + if ((GICH_LR_VIRT_ID(*entry) == irq) && + (GICH_LR_STATE(*entry) & GICH_LR_STATE_ACTIVE)) { + return true; + } + } + + return false; +} + +/* Return a pointer on the LR entry matching the given vIRQ. + * + * This function is used to retrieve an LR for which we know for sure that the + * corresponding vIRQ exists in the current context (i.e. its current state is + * not `invalid'): + * - Either the corresponding vIRQ has been validated with gic_virq_is_valid() + * so it is `active' or `active and pending', + * - Or it was pending and has been selected by gic_get_best_virq(). It is now + * `pending', `active' or `active and pending', depending on what the guest + * already did with this vIRQ. + * + * Having multiple LRs with the same VirtualID leads to UNPREDICTABLE + * behaviour in the GIC. We choose to return the first one that matches. + */ +static inline uint32_t *gic_get_lr_entry(GICState *s, int irq, int vcpu) +{ + int cpu = gic_get_vcpu_real_id(vcpu); + int lr_idx; + + for (lr_idx = 0; lr_idx < s->num_lrs; lr_idx++) { + uint32_t *entry = &s->h_lr[lr_idx][cpu]; + + if ((GICH_LR_VIRT_ID(*entry) == irq) && + (GICH_LR_STATE(*entry) != GICH_LR_STATE_INVALID)) { + return entry; + } + } + + g_assert_not_reached(); +} + #endif /* QEMU_ARM_GIC_INTERNAL_H */ diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static inline int gic_get_current_cpu(GICState *s) return 0; } +static inline int gic_get_current_vcpu(GICState *s) +{ + return gic_get_current_cpu(s) + GIC_NCPU; +} + /* Return true if this GIC config has interrupt groups, which is * true if we're a GICv2, or a GICv1 with the security extensions. */ -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> An access to the CPU interface is non-secure if the current GIC instance implements the security extensions, and the memory access is actually non-secure. Until then, it was checked with tests such as if (s->security_extn && !attrs.secure) { ... } in various places of the CPU interface code. With the implementation of the virtualization extensions, those tests must be updated to take into account whether we are in a vCPU interface or not. This is because the exposed vCPU interface does not implement security extensions. This commits replaces all those tests with a call to the gic_cpu_ns_access() function to check if the current access to the CPU interface is non-secure. This function takes into account whether the current CPU is a vCPU or not. Note that this function is used only in the (v)CPU interface code path. The distributor code path is left unchanged, as the distributor is not exposed to vCPUs at all. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180727095421.386-9-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 39 ++++++++++++++++++++++----------------- 1 file changed, 22 insertions(+), 17 deletions(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static inline bool gic_has_groups(GICState *s) return s->revision == 2 || s->security_extn; } +static inline bool gic_cpu_ns_access(GICState *s, int cpu, MemTxAttrs attrs) +{ + return !gic_is_vcpu(cpu) && s->security_extn && !attrs.secure; +} + /* TODO: Many places that call this routine could be optimized. */ /* Update interrupt status after enabled or pending bits have been changed. */ static void gic_update(GICState *s) @@ -XXX,XX +XXX,XX @@ static uint16_t gic_get_current_pending_irq(GICState *s, int cpu, /* On a GIC without the security extensions, reading this register * behaves in the same way as a secure access to a GIC with them. */ - bool secure = !s->security_extn || attrs.secure; + bool secure = !gic_cpu_ns_access(s, cpu, attrs); if (group == 0 && !secure) { /* Group0 interrupts hidden from Non-secure access */ @@ -XXX,XX +XXX,XX @@ static uint32_t gic_dist_get_priority(GICState *s, int cpu, int irq, static void gic_set_priority_mask(GICState *s, int cpu, uint8_t pmask, MemTxAttrs attrs) { - if (s->security_extn && !attrs.secure) { + if (gic_cpu_ns_access(s, cpu, attrs)) { if (s->priority_mask[cpu] & 0x80) { /* Priority Mask in upper half */ pmask = 0x80 | (pmask >> 1); @@ -XXX,XX +XXX,XX @@ static uint32_t gic_get_priority_mask(GICState *s, int cpu, MemTxAttrs attrs) { uint32_t pmask = s->priority_mask[cpu]; - if (s->security_extn && !attrs.secure) { + if (gic_cpu_ns_access(s, cpu, attrs)) { if (pmask & 0x80) { /* Priority Mask in upper half, return Non-secure view */ pmask = (pmask << 1) & 0xff; @@ -XXX,XX +XXX,XX @@ static uint32_t gic_get_cpu_control(GICState *s, int cpu, MemTxAttrs attrs) { uint32_t ret = s->cpu_ctlr[cpu]; - if (s->security_extn && !attrs.secure) { + if (gic_cpu_ns_access(s, cpu, attrs)) { /* Construct the NS banked view of GICC_CTLR from the correct * bits of the S banked view. We don't need to move the bypass * control bits because we don't implement that (IMPDEF) part @@ -XXX,XX +XXX,XX @@ static void gic_set_cpu_control(GICState *s, int cpu, uint32_t value, { uint32_t mask; - if (s->security_extn && !attrs.secure) { + if (gic_cpu_ns_access(s, cpu, attrs)) { /* The NS view can only write certain bits in the register; * the rest are unchanged */ @@ -XXX,XX +XXX,XX @@ static uint8_t gic_get_running_priority(GICState *s, int cpu, MemTxAttrs attrs) return 0xff; } - if (s->security_extn && !attrs.secure) { + if (gic_cpu_ns_access(s, cpu, attrs)) { if (s->running_priority[cpu] & 0x80) { /* Running priority in upper half of range: return the Non-secure * view of the priority. @@ -XXX,XX +XXX,XX @@ static bool gic_eoi_split(GICState *s, int cpu, MemTxAttrs attrs) /* Before GICv2 prio-drop and deactivate are not separable */ return false; } - if (s->security_extn && !attrs.secure) { + if (gic_cpu_ns_access(s, cpu, attrs)) { return s->cpu_ctlr[cpu] & GICC_CTLR_EOIMODE_NS; } return s->cpu_ctlr[cpu] & GICC_CTLR_EOIMODE; @@ -XXX,XX +XXX,XX @@ static void gic_deactivate_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) return; } - if (s->security_extn && !attrs.secure && !group) { + if (gic_cpu_ns_access(s, cpu, attrs) && !group) { DPRINTF("Non-secure DI for Group0 interrupt %d ignored\n", irq); return; } @@ -XXX,XX +XXX,XX @@ static void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) group = gic_has_groups(s) && GIC_DIST_TEST_GROUP(irq, cm); - if (s->security_extn && !attrs.secure && !group) { + if (gic_cpu_ns_access(s, cpu, attrs) && !group) { DPRINTF("Non-secure EOI for Group0 interrupt %d ignored\n", irq); return; } @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_read(GICState *s, int cpu, int offset, *data = gic_get_priority_mask(s, cpu, attrs); break; case 0x08: /* Binary Point */ - if (s->security_extn && !attrs.secure) { + if (gic_cpu_ns_access(s, cpu, attrs)) { if (s->cpu_ctlr[cpu] & GICC_CTLR_CBPR) { /* NS view of BPR when CBPR is 1 */ *data = MIN(s->bpr[cpu] + 1, 7); @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_read(GICState *s, int cpu, int offset, * With security extensions, secure access: ABPR (alias of NS BPR) * With security extensions, nonsecure access: RAZ/WI */ - if (!gic_has_groups(s) || (s->security_extn && !attrs.secure)) { + if (!gic_has_groups(s) || (gic_cpu_ns_access(s, cpu, attrs))) { *data = 0; } else { *data = s->abpr[cpu]; @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_read(GICState *s, int cpu, int offset, if (regno >= GIC_NR_APRS || s->revision != 2) { *data = 0; - } else if (s->security_extn && !attrs.secure) { + } else if (gic_cpu_ns_access(s, cpu, attrs)) { /* NS view of GICC_APR<n> is the top half of GIC_NSAPR<n> */ *data = gic_apr_ns_view(s, regno, cpu); } else { @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_read(GICState *s, int cpu, int offset, int regno = (offset - 0xe0) / 4; if (regno >= GIC_NR_APRS || s->revision != 2 || !gic_has_groups(s) || - (s->security_extn && !attrs.secure)) { + gic_cpu_ns_access(s, cpu, attrs)) { *data = 0; } else { *data = s->nsapr[regno][cpu]; @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset, gic_set_priority_mask(s, cpu, value, attrs); break; case 0x08: /* Binary Point */ - if (s->security_extn && !attrs.secure) { + if (gic_cpu_ns_access(s, cpu, attrs)) { if (s->cpu_ctlr[cpu] & GICC_CTLR_CBPR) { /* WI when CBPR is 1 */ return MEMTX_OK; @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset, gic_complete_irq(s, cpu, value & 0x3ff, attrs); return MEMTX_OK; case 0x1c: /* Aliased Binary Point */ - if (!gic_has_groups(s) || (s->security_extn && !attrs.secure)) { + if (!gic_has_groups(s) || (gic_cpu_ns_access(s, cpu, attrs))) { /* unimplemented, or NS access: RAZ/WI */ return MEMTX_OK; } else { @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset, if (regno >= GIC_NR_APRS || s->revision != 2) { return MEMTX_OK; } - if (s->security_extn && !attrs.secure) { + if (gic_cpu_ns_access(s, cpu, attrs)) { /* NS view of GICC_APR<n> is the top half of GIC_NSAPR<n> */ gic_apr_write_ns_view(s, regno, cpu, value); } else { @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset, if (regno >= GIC_NR_APRS || s->revision != 2) { return MEMTX_OK; } - if (!gic_has_groups(s) || (s->security_extn && !attrs.secure)) { + if (!gic_has_groups(s) || (gic_cpu_ns_access(s, cpu, attrs))) { return MEMTX_OK; } s->nsapr[regno][cpu] = value; -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Add some helper functions to gic_internal.h to get or change the state of an IRQ. When the current CPU is not a vCPU, the call is forwarded to the GIC distributor. Otherwise, it acts on the list register matching the IRQ in the current CPU virtual interface. gic_clear_active can have a side effect on the distributor, even in the vCPU case, when the correponding LR has the HW field set. Use those functions in the CPU interface code path to prepare for the vCPU interface implementation. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180727095421.386-10-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gic_internal.h | 83 ++++++++++++++++++++++++++++++++++++++++++ hw/intc/arm_gic.c | 32 +++++++--------- 2 files changed, 97 insertions(+), 18 deletions(-) diff --git a/hw/intc/gic_internal.h b/hw/intc/gic_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gic_internal.h +++ b/hw/intc/gic_internal.h @@ -XXX,XX +XXX,XX @@ REG32(GICH_LR63, 0x1fc) #define GICH_LR_GROUP(entry) (FIELD_EX32(entry, GICH_LR0, Grp1)) #define GICH_LR_HW(entry) (FIELD_EX32(entry, GICH_LR0, HW)) +#define GICH_LR_CLEAR_PENDING(entry) \ + ((entry) &= ~(GICH_LR_STATE_PENDING << R_GICH_LR0_State_SHIFT)) +#define GICH_LR_SET_ACTIVE(entry) \ + ((entry) |= (GICH_LR_STATE_ACTIVE << R_GICH_LR0_State_SHIFT)) +#define GICH_LR_CLEAR_ACTIVE(entry) \ + ((entry) &= ~(GICH_LR_STATE_ACTIVE << R_GICH_LR0_State_SHIFT)) + /* Valid bits for GICC_CTLR for GICv1, v1 with security extensions, * GICv2 and GICv2 with security extensions: */ @@ -XXX,XX +XXX,XX @@ static inline uint32_t *gic_get_lr_entry(GICState *s, int irq, int vcpu) g_assert_not_reached(); } +static inline bool gic_test_group(GICState *s, int irq, int cpu) +{ + if (gic_is_vcpu(cpu)) { + uint32_t *entry = gic_get_lr_entry(s, irq, cpu); + return GICH_LR_GROUP(*entry); + } else { + return GIC_DIST_TEST_GROUP(irq, 1 << cpu); + } +} + +static inline void gic_clear_pending(GICState *s, int irq, int cpu) +{ + if (gic_is_vcpu(cpu)) { + uint32_t *entry = gic_get_lr_entry(s, irq, cpu); + GICH_LR_CLEAR_PENDING(*entry); + } else { + /* Clear pending state for both level and edge triggered + * interrupts. (level triggered interrupts with an active line + * remain pending, see gic_test_pending) + */ + GIC_DIST_CLEAR_PENDING(irq, GIC_DIST_TEST_MODEL(irq) ? ALL_CPU_MASK + : (1 << cpu)); + } +} + +static inline void gic_set_active(GICState *s, int irq, int cpu) +{ + if (gic_is_vcpu(cpu)) { + uint32_t *entry = gic_get_lr_entry(s, irq, cpu); + GICH_LR_SET_ACTIVE(*entry); + } else { + GIC_DIST_SET_ACTIVE(irq, 1 << cpu); + } +} + +static inline void gic_clear_active(GICState *s, int irq, int cpu) +{ + if (gic_is_vcpu(cpu)) { + uint32_t *entry = gic_get_lr_entry(s, irq, cpu); + GICH_LR_CLEAR_ACTIVE(*entry); + + if (GICH_LR_HW(*entry)) { + /* Hardware interrupt. We must forward the deactivation request to + * the distributor. + */ + int phys_irq = GICH_LR_PHYS_ID(*entry); + int rcpu = gic_get_vcpu_real_id(cpu); + + if (phys_irq < GIC_NR_SGIS || phys_irq >= GIC_MAXIRQ) { + /* UNPREDICTABLE behaviour, we choose to ignore the request */ + return; + } + + /* This is equivalent to a NS write to DIR on the physical CPU + * interface. Hence group0 interrupt deactivation is ignored if + * the GIC is secure. + */ + if (!s->security_extn || GIC_DIST_TEST_GROUP(phys_irq, 1 << rcpu)) { + GIC_DIST_CLEAR_ACTIVE(phys_irq, 1 << rcpu); + } + } + } else { + GIC_DIST_CLEAR_ACTIVE(irq, 1 << cpu); + } +} + +static inline int gic_get_priority(GICState *s, int irq, int cpu) +{ + if (gic_is_vcpu(cpu)) { + uint32_t *entry = gic_get_lr_entry(s, irq, cpu); + return GICH_LR_PRIORITY(*entry); + } else { + return GIC_DIST_GET_PRIORITY(irq, cpu); + } +} + #endif /* QEMU_ARM_GIC_INTERNAL_H */ diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static uint16_t gic_get_current_pending_irq(GICState *s, int cpu, uint16_t pending_irq = s->current_pending[cpu]; if (pending_irq < GIC_MAXIRQ && gic_has_groups(s)) { - int group = GIC_DIST_TEST_GROUP(pending_irq, (1 << cpu)); + int group = gic_test_group(s, pending_irq, cpu); + /* On a GIC without the security extensions, reading this register * behaves in the same way as a secure access to a GIC with them. */ @@ -XXX,XX +XXX,XX @@ static int gic_get_group_priority(GICState *s, int cpu, int irq) if (gic_has_groups(s) && !(s->cpu_ctlr[cpu] & GICC_CTLR_CBPR) && - GIC_DIST_TEST_GROUP(irq, (1 << cpu))) { + gic_test_group(s, irq, cpu)) { bpr = s->abpr[cpu] - 1; assert(bpr >= 0); } else { @@ -XXX,XX +XXX,XX @@ static int gic_get_group_priority(GICState *s, int cpu, int irq) */ mask = ~0U << ((bpr & 7) + 1); - return GIC_DIST_GET_PRIORITY(irq, cpu) & mask; + return gic_get_priority(s, irq, cpu) & mask; } static void gic_activate_irq(GICState *s, int cpu, int irq) @@ -XXX,XX +XXX,XX @@ static void gic_activate_irq(GICState *s, int cpu, int irq) int regno = preemption_level / 32; int bitno = preemption_level % 32; - if (gic_has_groups(s) && GIC_DIST_TEST_GROUP(irq, (1 << cpu))) { + if (gic_has_groups(s) && gic_test_group(s, irq, cpu)) { s->nsapr[regno][cpu] |= (1 << bitno); } else { s->apr[regno][cpu] |= (1 << bitno); } s->running_priority[cpu] = prio; - GIC_DIST_SET_ACTIVE(irq, 1 << cpu); + gic_set_active(s, irq, cpu); } static int gic_get_prio_from_apr_bits(GICState *s, int cpu) @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) return irq; } - if (GIC_DIST_GET_PRIORITY(irq, cpu) >= s->running_priority[cpu]) { + if (gic_get_priority(s, irq, cpu) >= s->running_priority[cpu]) { DPRINTF("ACK, pending interrupt (%d) has insufficient priority\n", irq); return 1023; } @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) /* Clear pending flags for both level and edge triggered interrupts. * Level triggered IRQs will be reasserted once they become inactive. */ - GIC_DIST_CLEAR_PENDING(irq, GIC_DIST_TEST_MODEL(irq) ? ALL_CPU_MASK - : cm); + gic_clear_pending(s, irq, cpu); ret = irq; } else { if (irq < GIC_NR_SGIS) { @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) src = ctz32(s->sgi_pending[irq][cpu]); s->sgi_pending[irq][cpu] &= ~(1 << src); if (s->sgi_pending[irq][cpu] == 0) { - GIC_DIST_CLEAR_PENDING(irq, - GIC_DIST_TEST_MODEL(irq) ? ALL_CPU_MASK - : cm); + gic_clear_pending(s, irq, cpu); } ret = irq | ((src & 0x7) << 10); } else { @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) * interrupts. (level triggered interrupts with an active line * remain pending, see gic_test_pending) */ - GIC_DIST_CLEAR_PENDING(irq, GIC_DIST_TEST_MODEL(irq) ? ALL_CPU_MASK - : cm); + gic_clear_pending(s, irq, cpu); ret = irq; } } @@ -XXX,XX +XXX,XX @@ static bool gic_eoi_split(GICState *s, int cpu, MemTxAttrs attrs) static void gic_deactivate_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) { - int cm = 1 << cpu; int group; if (irq >= s->num_irq) { @@ -XXX,XX +XXX,XX @@ static void gic_deactivate_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) return; } - group = gic_has_groups(s) && GIC_DIST_TEST_GROUP(irq, cm); + group = gic_has_groups(s) && gic_test_group(s, irq, cpu); if (!gic_eoi_split(s, cpu, attrs)) { /* This is UNPREDICTABLE; we choose to ignore it */ @@ -XXX,XX +XXX,XX @@ static void gic_deactivate_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) return; } - GIC_DIST_CLEAR_ACTIVE(irq, cm); + gic_clear_active(s, irq, cpu); } static void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) @@ -XXX,XX +XXX,XX @@ static void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) } } - group = gic_has_groups(s) && GIC_DIST_TEST_GROUP(irq, cm); + group = gic_has_groups(s) && gic_test_group(s, irq, cpu); if (gic_cpu_ns_access(s, cpu, attrs) && !group) { DPRINTF("Non-secure EOI for Group0 interrupt %d ignored\n", irq); @@ -XXX,XX +XXX,XX @@ static void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) /* In GICv2 the guest can choose to split priority-drop and deactivate */ if (!gic_eoi_split(s, cpu, attrs)) { - GIC_DIST_CLEAR_ACTIVE(irq, cm); + gic_clear_active(s, irq, cpu); } gic_update(s); } -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Implement virtualization extensions in gic_activate_irq() and gic_drop_prio() and in gic_get_prio_from_apr_bits() called by gic_drop_prio(). When the current CPU is a vCPU: - Use GIC_VIRT_MIN_BPR and GIC_VIRT_NR_APRS instead of their non-virt counterparts, - the vCPU APR is stored in the virtual interface, in h_apr. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-11-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 50 +++++++++++++++++++++++++++++++++++------------ 1 file changed, 38 insertions(+), 12 deletions(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static void gic_activate_irq(GICState *s, int cpu, int irq) * and update the running priority. */ int prio = gic_get_group_priority(s, cpu, irq); - int preemption_level = prio >> (GIC_MIN_BPR + 1); + int min_bpr = gic_is_vcpu(cpu) ? GIC_VIRT_MIN_BPR : GIC_MIN_BPR; + int preemption_level = prio >> (min_bpr + 1); int regno = preemption_level / 32; int bitno = preemption_level % 32; + uint32_t *papr = NULL; - if (gic_has_groups(s) && gic_test_group(s, irq, cpu)) { - s->nsapr[regno][cpu] |= (1 << bitno); + if (gic_is_vcpu(cpu)) { + assert(regno == 0); + papr = &s->h_apr[gic_get_vcpu_real_id(cpu)]; + } else if (gic_has_groups(s) && gic_test_group(s, irq, cpu)) { + papr = &s->nsapr[regno][cpu]; } else { - s->apr[regno][cpu] |= (1 << bitno); + papr = &s->apr[regno][cpu]; } + *papr |= (1 << bitno); + s->running_priority[cpu] = prio; gic_set_active(s, irq, cpu); } @@ -XXX,XX +XXX,XX @@ static int gic_get_prio_from_apr_bits(GICState *s, int cpu) * on the set bits in the Active Priority Registers. */ int i; + + if (gic_is_vcpu(cpu)) { + uint32_t apr = s->h_apr[gic_get_vcpu_real_id(cpu)]; + if (apr) { + return ctz32(apr) << (GIC_VIRT_MIN_BPR + 1); + } else { + return 0x100; + } + } + for (i = 0; i < GIC_NR_APRS; i++) { uint32_t apr = s->apr[i][cpu] | s->nsapr[i][cpu]; if (!apr) { @@ -XXX,XX +XXX,XX @@ static void gic_drop_prio(GICState *s, int cpu, int group) * running priority will be wrong, so interrupts that should preempt * might not do so, and interrupts that should not preempt might do so. */ - int i; + if (gic_is_vcpu(cpu)) { + int rcpu = gic_get_vcpu_real_id(cpu); - for (i = 0; i < GIC_NR_APRS; i++) { - uint32_t *papr = group ? &s->nsapr[i][cpu] : &s->apr[i][cpu]; - if (!*papr) { - continue; + if (s->h_apr[rcpu]) { + /* Clear lowest set bit */ + s->h_apr[rcpu] &= s->h_apr[rcpu] - 1; + } + } else { + int i; + + for (i = 0; i < GIC_NR_APRS; i++) { + uint32_t *papr = group ? &s->nsapr[i][cpu] : &s->apr[i][cpu]; + if (!*papr) { + continue; + } + /* Clear lowest set bit */ + *papr &= *papr - 1; + break; } - /* Clear lowest set bit */ - *papr &= *papr - 1; - break; } s->running_priority[cpu] = gic_get_prio_from_apr_bits(s, cpu); -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Implement virtualization extensions in the gic_acknowledge_irq() function. This function changes the state of the highest priority IRQ from pending to active. When the current CPU is a vCPU, modifying the state of an IRQ modifies the corresponding LR entry. However if we clear the pending flag before setting the active one, we lose track of the LR entry as it becomes invalid. The next call to gic_get_lr_entry() will fail. To overcome this issue, we call gic_activate_irq() before gic_clear_pending(). This does not change the general behaviour of gic_acknowledge_irq. We also move the SGI case in gic_clear_pending_sgi() to enhance code readability as the virtualization extensions support adds a if-else level. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-12-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 52 ++++++++++++++++++++++++++++++----------------- 1 file changed, 33 insertions(+), 19 deletions(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static void gic_drop_prio(GICState *s, int cpu, int group) s->running_priority[cpu] = gic_get_prio_from_apr_bits(s, cpu); } +static inline uint32_t gic_clear_pending_sgi(GICState *s, int irq, int cpu) +{ + int src; + uint32_t ret; + + if (!gic_is_vcpu(cpu)) { + /* Lookup the source CPU for the SGI and clear this in the + * sgi_pending map. Return the src and clear the overall pending + * state on this CPU if the SGI is not pending from any CPUs. + */ + assert(s->sgi_pending[irq][cpu] != 0); + src = ctz32(s->sgi_pending[irq][cpu]); + s->sgi_pending[irq][cpu] &= ~(1 << src); + if (s->sgi_pending[irq][cpu] == 0) { + gic_clear_pending(s, irq, cpu); + } + ret = irq | ((src & 0x7) << 10); + } else { + uint32_t *lr_entry = gic_get_lr_entry(s, irq, cpu); + src = GICH_LR_CPUID(*lr_entry); + + gic_clear_pending(s, irq, cpu); + ret = irq | (src << 10); + } + + return ret; +} + uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) { - int ret, irq, src; - int cm = 1 << cpu; + int ret, irq; /* gic_get_current_pending_irq() will return 1022 or 1023 appropriately * for the case where this GIC supports grouping and the pending interrupt * is in the wrong group. */ irq = gic_get_current_pending_irq(s, cpu, attrs); - trace_gic_acknowledge_irq(cpu, irq); + trace_gic_acknowledge_irq(gic_get_vcpu_real_id(cpu), irq); if (irq >= GIC_MAXIRQ) { DPRINTF("ACK, no pending interrupt or it is hidden: %d\n", irq); @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) return 1023; } + gic_activate_irq(s, cpu, irq); + if (s->revision == REV_11MPCORE) { /* Clear pending flags for both level and edge triggered interrupts. * Level triggered IRQs will be reasserted once they become inactive. @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) ret = irq; } else { if (irq < GIC_NR_SGIS) { - /* Lookup the source CPU for the SGI and clear this in the - * sgi_pending map. Return the src and clear the overall pending - * state on this CPU if the SGI is not pending from any CPUs. - */ - assert(s->sgi_pending[irq][cpu] != 0); - src = ctz32(s->sgi_pending[irq][cpu]); - s->sgi_pending[irq][cpu] &= ~(1 << src); - if (s->sgi_pending[irq][cpu] == 0) { - gic_clear_pending(s, irq, cpu); - } - ret = irq | ((src & 0x7) << 10); + ret = gic_clear_pending_sgi(s, irq, cpu); } else { - /* Clear pending state for both level and edge triggered - * interrupts. (level triggered interrupts with an active line - * remain pending, see gic_test_pending) - */ gic_clear_pending(s, irq, cpu); ret = irq; } } - gic_activate_irq(s, cpu, irq); gic_update(s); DPRINTF("ACK %d\n", irq); return ret; -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Implement virtualization extensions in the gic_deactivate_irq() and gic_complete_irq() functions. When the guest writes an invalid vIRQ to V_EOIR or V_DIR, since the GICv2 specification is not entirely clear here, we adopt the behaviour observed on real hardware: * When V_CTRL.EOIMode is false (EOI split is disabled): - In case of an invalid vIRQ write to V_EOIR: -> If some bits are set in H_APR, an invalid vIRQ write to V_EOIR triggers a priority drop, and increments V_HCR.EOICount. -> If V_APR is already cleared, nothing happen - An invalid vIRQ write to V_DIR is ignored. * When V_CTRL.EOIMode is true: - In case of an invalid vIRQ write to V_EOIR: -> If some bits are set in H_APR, an invalid vIRQ write to V_EOIR triggers a priority drop. -> If V_APR is already cleared, nothing happen - An invalid vIRQ write to V_DIR increments V_HCR.EOICount. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180727095421.386-13-luc.michel@greensocs.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 51 +++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 47 insertions(+), 4 deletions(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static void gic_deactivate_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) { int group; - if (irq >= s->num_irq) { + if (irq >= GIC_MAXIRQ || (!gic_is_vcpu(cpu) && irq >= s->num_irq)) { /* * This handles two cases: * 1. If software writes the ID of a spurious interrupt [ie 1023] * to the GICC_DIR, the GIC ignores that write. * 2. If software writes the number of a non-existent interrupt * this must be a subcase of "value written is not an active interrupt" - * and so this is UNPREDICTABLE. We choose to ignore it. + * and so this is UNPREDICTABLE. We choose to ignore it. For vCPUs, + * all IRQs potentially exist, so this limit does not apply. */ return; } - group = gic_has_groups(s) && gic_test_group(s, irq, cpu); - if (!gic_eoi_split(s, cpu, attrs)) { /* This is UNPREDICTABLE; we choose to ignore it */ qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void gic_deactivate_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) return; } + if (gic_is_vcpu(cpu) && !gic_virq_is_valid(s, irq, cpu)) { + /* This vIRQ does not have an LR entry which is either active or + * pending and active. Increment EOICount and ignore the write. + */ + int rcpu = gic_get_vcpu_real_id(cpu); + s->h_hcr[rcpu] += 1 << R_GICH_HCR_EOICount_SHIFT; + return; + } + + group = gic_has_groups(s) && gic_test_group(s, irq, cpu); + if (gic_cpu_ns_access(s, cpu, attrs) && !group) { DPRINTF("Non-secure DI for Group0 interrupt %d ignored\n", irq); return; @@ -XXX,XX +XXX,XX @@ static void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) int group; DPRINTF("EOI %d\n", irq); + if (gic_is_vcpu(cpu)) { + /* The call to gic_prio_drop() will clear a bit in GICH_APR iff the + * running prio is < 0x100. + */ + bool prio_drop = s->running_priority[cpu] < 0x100; + + if (irq >= GIC_MAXIRQ) { + /* Ignore spurious interrupt */ + return; + } + + gic_drop_prio(s, cpu, 0); + + if (!gic_eoi_split(s, cpu, attrs)) { + bool valid = gic_virq_is_valid(s, irq, cpu); + if (prio_drop && !valid) { + /* We are in a situation where: + * - V_CTRL.EOIMode is false (no EOI split), + * - The call to gic_drop_prio() cleared a bit in GICH_APR, + * - This vIRQ does not have an LR entry which is either + * active or pending and active. + * In that case, we must increment EOICount. + */ + int rcpu = gic_get_vcpu_real_id(cpu); + s->h_hcr[rcpu] += 1 << R_GICH_HCR_EOICount_SHIFT; + } else if (valid) { + gic_clear_active(s, irq, cpu); + } + } + + return; + } + if (irq >= s->num_irq) { /* This handles two cases: * 1. If software writes the ID of a spurious interrupt [ie 1023] -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Implement virtualization extensions in the gic_cpu_read() and gic_cpu_write() functions. Those are the last bits missing to fully support virtualization extensions in the CPU interface path. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-14-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_read(GICState *s, int cpu, int offset, case 0xd0: case 0xd4: case 0xd8: case 0xdc: { int regno = (offset - 0xd0) / 4; + int nr_aprs = gic_is_vcpu(cpu) ? GIC_VIRT_NR_APRS : GIC_NR_APRS; - if (regno >= GIC_NR_APRS || s->revision != 2) { + if (regno >= nr_aprs || s->revision != 2) { *data = 0; + } else if (gic_is_vcpu(cpu)) { + *data = s->h_apr[gic_get_vcpu_real_id(cpu)]; } else if (gic_cpu_ns_access(s, cpu, attrs)) { /* NS view of GICC_APR<n> is the top half of GIC_NSAPR<n> */ *data = gic_apr_ns_view(s, regno, cpu); @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_read(GICState *s, int cpu, int offset, int regno = (offset - 0xe0) / 4; if (regno >= GIC_NR_APRS || s->revision != 2 || !gic_has_groups(s) || - gic_cpu_ns_access(s, cpu, attrs)) { + gic_cpu_ns_access(s, cpu, attrs) || gic_is_vcpu(cpu)) { *data = 0; } else { *data = s->nsapr[regno][cpu]; @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset, s->abpr[cpu] = MAX(value & 0x7, GIC_MIN_ABPR); } } else { - s->bpr[cpu] = MAX(value & 0x7, GIC_MIN_BPR); + int min_bpr = gic_is_vcpu(cpu) ? GIC_VIRT_MIN_BPR : GIC_MIN_BPR; + s->bpr[cpu] = MAX(value & 0x7, min_bpr); } break; case 0x10: /* End Of Interrupt */ @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset, case 0xd0: case 0xd4: case 0xd8: case 0xdc: { int regno = (offset - 0xd0) / 4; + int nr_aprs = gic_is_vcpu(cpu) ? GIC_VIRT_NR_APRS : GIC_NR_APRS; - if (regno >= GIC_NR_APRS || s->revision != 2) { + if (regno >= nr_aprs || s->revision != 2) { return MEMTX_OK; } - if (gic_cpu_ns_access(s, cpu, attrs)) { + if (gic_is_vcpu(cpu)) { + s->h_apr[gic_get_vcpu_real_id(cpu)] = value; + } else if (gic_cpu_ns_access(s, cpu, attrs)) { /* NS view of GICC_APR<n> is the top half of GIC_NSAPR<n> */ gic_apr_write_ns_view(s, regno, cpu, value); } else { @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset, if (regno >= GIC_NR_APRS || s->revision != 2) { return MEMTX_OK; } + if (gic_is_vcpu(cpu)) { + return MEMTX_OK; + } if (!gic_has_groups(s) || (gic_cpu_ns_access(s, cpu, attrs))) { return MEMTX_OK; } -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Add the read/write functions to handle accesses to the vCPU interface. Those accesses are forwarded to the real CPU interface, with the CPU id being converted to the corresponding vCPU id (vCPU id = CPU id + GIC_NCPU). Signed-off-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180727095421.386-15-luc.michel@greensocs.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 37 +++++++++++++++++++++++++++++++++++-- 1 file changed, 35 insertions(+), 2 deletions(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_do_cpu_write(void *opaque, hwaddr addr, return gic_cpu_write(s, id, addr, value, attrs); } +static MemTxResult gic_thisvcpu_read(void *opaque, hwaddr addr, uint64_t *data, + unsigned size, MemTxAttrs attrs) +{ + GICState *s = (GICState *)opaque; + + return gic_cpu_read(s, gic_get_current_vcpu(s), addr, data, attrs); +} + +static MemTxResult gic_thisvcpu_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size, + MemTxAttrs attrs) +{ + GICState *s = (GICState *)opaque; + + return gic_cpu_write(s, gic_get_current_vcpu(s), addr, value, attrs); +} + static const MemoryRegionOps gic_ops[2] = { { .read_with_attrs = gic_dist_read, @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps gic_cpu_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; +static const MemoryRegionOps gic_virt_ops[2] = { + { + .read_with_attrs = NULL, + .write_with_attrs = NULL, + .endianness = DEVICE_NATIVE_ENDIAN, + }, + { + .read_with_attrs = gic_thisvcpu_read, + .write_with_attrs = gic_thisvcpu_write, + .endianness = DEVICE_NATIVE_ENDIAN, + } +}; + static void arm_gic_realize(DeviceState *dev, Error **errp) { /* Device instance realize function for the GIC sysbus device */ @@ -XXX,XX +XXX,XX @@ static void arm_gic_realize(DeviceState *dev, Error **errp) return; } - /* This creates distributor and main CPU interface (s->cpuiomem[0]) */ - gic_init_irqs_and_mmio(s, gic_set_irq, gic_ops, NULL); + /* This creates distributor, main CPU interface (s->cpuiomem[0]) and if + * enabled, virtualization extensions related interfaces (main virtual + * interface (s->vifaceiomem[0]) and virtual CPU interface). + */ + gic_init_irqs_and_mmio(s, gic_set_irq, gic_ops, gic_virt_ops); /* Extra core-specific regions for the CPU interfaces. This is * necessary for "franken-GIC" implementations, for example on -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Implement the read and write functions for the virtual interface of the virtualization extensions in the GICv2. One mirror region per CPU is also created, which maps to that specific CPU id. This is required by the GIC architecture specification. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-16-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 235 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 233 insertions(+), 2 deletions(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static void gic_update(GICState *s) } } +/* Return true if this LR is empty, i.e. the corresponding bit + * in ELRSR is set. + */ +static inline bool gic_lr_entry_is_free(uint32_t entry) +{ + return (GICH_LR_STATE(entry) == GICH_LR_STATE_INVALID) + && (GICH_LR_HW(entry) || !GICH_LR_EOI(entry)); +} + +/* Return true if this LR should trigger an EOI maintenance interrupt, i.e. the + * corrsponding bit in EISR is set. + */ +static inline bool gic_lr_entry_is_eoi(uint32_t entry) +{ + return (GICH_LR_STATE(entry) == GICH_LR_STATE_INVALID) + && !GICH_LR_HW(entry) && GICH_LR_EOI(entry); +} + static void gic_set_irq_11mpcore(GICState *s, int irq, int level, int cm, int target) { @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_thisvcpu_write(void *opaque, hwaddr addr, return gic_cpu_write(s, gic_get_current_vcpu(s), addr, value, attrs); } +static uint32_t gic_compute_eisr(GICState *s, int cpu, int lr_start) +{ + int lr_idx; + uint32_t ret = 0; + + for (lr_idx = lr_start; lr_idx < s->num_lrs; lr_idx++) { + uint32_t *entry = &s->h_lr[lr_idx][cpu]; + ret = deposit32(ret, lr_idx - lr_start, 1, + gic_lr_entry_is_eoi(*entry)); + } + + return ret; +} + +static uint32_t gic_compute_elrsr(GICState *s, int cpu, int lr_start) +{ + int lr_idx; + uint32_t ret = 0; + + for (lr_idx = lr_start; lr_idx < s->num_lrs; lr_idx++) { + uint32_t *entry = &s->h_lr[lr_idx][cpu]; + ret = deposit32(ret, lr_idx - lr_start, 1, + gic_lr_entry_is_free(*entry)); + } + + return ret; +} + +static void gic_vmcr_write(GICState *s, uint32_t value, MemTxAttrs attrs) +{ + int vcpu = gic_get_current_vcpu(s); + uint32_t ctlr; + uint32_t abpr; + uint32_t bpr; + uint32_t prio_mask; + + ctlr = FIELD_EX32(value, GICH_VMCR, VMCCtlr); + abpr = FIELD_EX32(value, GICH_VMCR, VMABP); + bpr = FIELD_EX32(value, GICH_VMCR, VMBP); + prio_mask = FIELD_EX32(value, GICH_VMCR, VMPriMask) << 3; + + gic_set_cpu_control(s, vcpu, ctlr, attrs); + s->abpr[vcpu] = MAX(abpr, GIC_VIRT_MIN_ABPR); + s->bpr[vcpu] = MAX(bpr, GIC_VIRT_MIN_BPR); + gic_set_priority_mask(s, vcpu, prio_mask, attrs); +} + +static MemTxResult gic_hyp_read(void *opaque, int cpu, hwaddr addr, + uint64_t *data, MemTxAttrs attrs) +{ + GICState *s = ARM_GIC(opaque); + int vcpu = cpu + GIC_NCPU; + + switch (addr) { + case A_GICH_HCR: /* Hypervisor Control */ + *data = s->h_hcr[cpu]; + break; + + case A_GICH_VTR: /* VGIC Type */ + *data = FIELD_DP32(0, GICH_VTR, ListRegs, s->num_lrs - 1); + *data = FIELD_DP32(*data, GICH_VTR, PREbits, + GIC_VIRT_MAX_GROUP_PRIO_BITS - 1); + *data = FIELD_DP32(*data, GICH_VTR, PRIbits, + (7 - GIC_VIRT_MIN_BPR) - 1); + break; + + case A_GICH_VMCR: /* Virtual Machine Control */ + *data = FIELD_DP32(0, GICH_VMCR, VMCCtlr, + extract32(s->cpu_ctlr[vcpu], 0, 10)); + *data = FIELD_DP32(*data, GICH_VMCR, VMABP, s->abpr[vcpu]); + *data = FIELD_DP32(*data, GICH_VMCR, VMBP, s->bpr[vcpu]); + *data = FIELD_DP32(*data, GICH_VMCR, VMPriMask, + extract32(s->priority_mask[vcpu], 3, 5)); + break; + + case A_GICH_MISR: /* Maintenance Interrupt Status */ + *data = s->h_misr[cpu]; + break; + + case A_GICH_EISR0: /* End of Interrupt Status 0 and 1 */ + case A_GICH_EISR1: + *data = gic_compute_eisr(s, cpu, (addr - A_GICH_EISR0) * 8); + break; + + case A_GICH_ELRSR0: /* Empty List Status 0 and 1 */ + case A_GICH_ELRSR1: + *data = gic_compute_elrsr(s, cpu, (addr - A_GICH_ELRSR0) * 8); + break; + + case A_GICH_APR: /* Active Priorities */ + *data = s->h_apr[cpu]; + break; + + case A_GICH_LR0 ... A_GICH_LR63: /* List Registers */ + { + int lr_idx = (addr - A_GICH_LR0) / 4; + + if (lr_idx > s->num_lrs) { + *data = 0; + } else { + *data = s->h_lr[lr_idx][cpu]; + } + break; + } + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "gic_hyp_read: Bad offset %" HWADDR_PRIx "\n", addr); + return MEMTX_OK; + } + + return MEMTX_OK; +} + +static MemTxResult gic_hyp_write(void *opaque, int cpu, hwaddr addr, + uint64_t value, MemTxAttrs attrs) +{ + GICState *s = ARM_GIC(opaque); + int vcpu = cpu + GIC_NCPU; + + switch (addr) { + case A_GICH_HCR: /* Hypervisor Control */ + s->h_hcr[cpu] = value & GICH_HCR_MASK; + break; + + case A_GICH_VMCR: /* Virtual Machine Control */ + gic_vmcr_write(s, value, attrs); + break; + + case A_GICH_APR: /* Active Priorities */ + s->h_apr[cpu] = value; + s->running_priority[vcpu] = gic_get_prio_from_apr_bits(s, vcpu); + break; + + case A_GICH_LR0 ... A_GICH_LR63: /* List Registers */ + { + int lr_idx = (addr - A_GICH_LR0) / 4; + + if (lr_idx > s->num_lrs) { + return MEMTX_OK; + } + + s->h_lr[lr_idx][cpu] = value & GICH_LR_MASK; + break; + } + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "gic_hyp_write: Bad offset %" HWADDR_PRIx "\n", addr); + return MEMTX_OK; + } + + return MEMTX_OK; +} + +static MemTxResult gic_thiscpu_hyp_read(void *opaque, hwaddr addr, uint64_t *data, + unsigned size, MemTxAttrs attrs) +{ + GICState *s = (GICState *)opaque; + + return gic_hyp_read(s, gic_get_current_cpu(s), addr, data, attrs); +} + +static MemTxResult gic_thiscpu_hyp_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size, + MemTxAttrs attrs) +{ + GICState *s = (GICState *)opaque; + + return gic_hyp_write(s, gic_get_current_cpu(s), addr, value, attrs); +} + +static MemTxResult gic_do_hyp_read(void *opaque, hwaddr addr, uint64_t *data, + unsigned size, MemTxAttrs attrs) +{ + GICState **backref = (GICState **)opaque; + GICState *s = *backref; + int id = (backref - s->backref); + + return gic_hyp_read(s, id, addr, data, attrs); +} + +static MemTxResult gic_do_hyp_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size, + MemTxAttrs attrs) +{ + GICState **backref = (GICState **)opaque; + GICState *s = *backref; + int id = (backref - s->backref); + + return gic_hyp_write(s, id + GIC_NCPU, addr, value, attrs); + +} + static const MemoryRegionOps gic_ops[2] = { { .read_with_attrs = gic_dist_read, @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps gic_cpu_ops = { static const MemoryRegionOps gic_virt_ops[2] = { { - .read_with_attrs = NULL, - .write_with_attrs = NULL, + .read_with_attrs = gic_thiscpu_hyp_read, + .write_with_attrs = gic_thiscpu_hyp_write, .endianness = DEVICE_NATIVE_ENDIAN, }, { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps gic_virt_ops[2] = { } }; +static const MemoryRegionOps gic_viface_ops = { + .read_with_attrs = gic_do_hyp_read, + .write_with_attrs = gic_do_hyp_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + static void arm_gic_realize(DeviceState *dev, Error **errp) { /* Device instance realize function for the GIC sysbus device */ @@ -XXX,XX +XXX,XX @@ static void arm_gic_realize(DeviceState *dev, Error **errp) &s->backref[i], "gic_cpu", 0x100); sysbus_init_mmio(sbd, &s->cpuiomem[i+1]); } + + /* Extra core-specific regions for virtual interfaces. This is required by + * the GICv2 specification. + */ + if (s->virt_extn) { + for (i = 0; i < s->num_cpu; i++) { + memory_region_init_io(&s->vifaceiomem[i + 1], OBJECT(s), + &gic_viface_ops, &s->backref[i], + "gic_viface", 0x1000); + sysbus_init_mmio(sbd, &s->vifaceiomem[i + 1]); + } + } + } static void arm_gic_class_init(ObjectClass *klass, void *data) -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Add the gic_update_virt() function to update the vCPU interface states and raise vIRQ and vFIQ as needed. This commit renames gic_update() to gic_update_internal() and generalizes it to handle both cases, with a `virt' parameter to track whether we are updating the CPU or vCPU interfaces. The main difference between CPU and vCPU is the way we select the best IRQ. This part has been split into the gic_get_best_(v)irq functions. For the virt case, the LRs are iterated to find the best candidate. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-17-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 175 +++++++++++++++++++++++++++++++++++----------- 1 file changed, 136 insertions(+), 39 deletions(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static inline bool gic_cpu_ns_access(GICState *s, int cpu, MemTxAttrs attrs) return !gic_is_vcpu(cpu) && s->security_extn && !attrs.secure; } +static inline void gic_get_best_irq(GICState *s, int cpu, + int *best_irq, int *best_prio, int *group) +{ + int irq; + int cm = 1 << cpu; + + *best_irq = 1023; + *best_prio = 0x100; + + for (irq = 0; irq < s->num_irq; irq++) { + if (GIC_DIST_TEST_ENABLED(irq, cm) && gic_test_pending(s, irq, cm) && + (!GIC_DIST_TEST_ACTIVE(irq, cm)) && + (irq < GIC_INTERNAL || GIC_DIST_TARGET(irq) & cm)) { + if (GIC_DIST_GET_PRIORITY(irq, cpu) < *best_prio) { + *best_prio = GIC_DIST_GET_PRIORITY(irq, cpu); + *best_irq = irq; + } + } + } + + if (*best_irq < 1023) { + *group = GIC_DIST_TEST_GROUP(*best_irq, cm); + } +} + +static inline void gic_get_best_virq(GICState *s, int cpu, + int *best_irq, int *best_prio, int *group) +{ + int lr_idx = 0; + + *best_irq = 1023; + *best_prio = 0x100; + + for (lr_idx = 0; lr_idx < s->num_lrs; lr_idx++) { + uint32_t lr_entry = s->h_lr[lr_idx][cpu]; + int state = GICH_LR_STATE(lr_entry); + + if (state == GICH_LR_STATE_PENDING) { + int prio = GICH_LR_PRIORITY(lr_entry); + + if (prio < *best_prio) { + *best_prio = prio; + *best_irq = GICH_LR_VIRT_ID(lr_entry); + *group = GICH_LR_GROUP(lr_entry); + } + } + } +} + +/* Return true if IRQ signaling is enabled for the given cpu and at least one + * of the given groups: + * - in the non-virt case, the distributor must be enabled for one of the + * given groups + * - in the virt case, the virtual interface must be enabled. + * - in all cases, the (v)CPU interface must be enabled for one of the given + * groups. + */ +static inline bool gic_irq_signaling_enabled(GICState *s, int cpu, bool virt, + int group_mask) +{ + if (!virt && !(s->ctlr & group_mask)) { + return false; + } + + if (virt && !(s->h_hcr[cpu] & R_GICH_HCR_EN_MASK)) { + return false; + } + + if (!(s->cpu_ctlr[cpu] & group_mask)) { + return false; + } + + return true; +} + /* TODO: Many places that call this routine could be optimized. */ /* Update interrupt status after enabled or pending bits have been changed. */ -static void gic_update(GICState *s) +static inline void gic_update_internal(GICState *s, bool virt) { int best_irq; int best_prio; - int irq; int irq_level, fiq_level; - int cpu; - int cm; + int cpu, cpu_iface; + int group = 0; + qemu_irq *irq_lines = virt ? s->parent_virq : s->parent_irq; + qemu_irq *fiq_lines = virt ? s->parent_vfiq : s->parent_fiq; for (cpu = 0; cpu < s->num_cpu; cpu++) { - cm = 1 << cpu; - s->current_pending[cpu] = 1023; - if (!(s->ctlr & (GICD_CTLR_EN_GRP0 | GICD_CTLR_EN_GRP1)) - || !(s->cpu_ctlr[cpu] & (GICC_CTLR_EN_GRP0 | GICC_CTLR_EN_GRP1))) { - qemu_irq_lower(s->parent_irq[cpu]); - qemu_irq_lower(s->parent_fiq[cpu]); + cpu_iface = virt ? (cpu + GIC_NCPU) : cpu; + + s->current_pending[cpu_iface] = 1023; + if (!gic_irq_signaling_enabled(s, cpu, virt, + GICD_CTLR_EN_GRP0 | GICD_CTLR_EN_GRP1)) { + qemu_irq_lower(irq_lines[cpu]); + qemu_irq_lower(fiq_lines[cpu]); continue; } - best_prio = 0x100; - best_irq = 1023; - for (irq = 0; irq < s->num_irq; irq++) { - if (GIC_DIST_TEST_ENABLED(irq, cm) && - gic_test_pending(s, irq, cm) && - (!GIC_DIST_TEST_ACTIVE(irq, cm)) && - (irq < GIC_INTERNAL || GIC_DIST_TARGET(irq) & cm)) { - if (GIC_DIST_GET_PRIORITY(irq, cpu) < best_prio) { - best_prio = GIC_DIST_GET_PRIORITY(irq, cpu); - best_irq = irq; - } - } + + if (virt) { + gic_get_best_virq(s, cpu, &best_irq, &best_prio, &group); + } else { + gic_get_best_irq(s, cpu, &best_irq, &best_prio, &group); } if (best_irq != 1023) { trace_gic_update_bestirq(cpu, best_irq, best_prio, - s->priority_mask[cpu], s->running_priority[cpu]); + s->priority_mask[cpu_iface], s->running_priority[cpu_iface]); } irq_level = fiq_level = 0; - if (best_prio < s->priority_mask[cpu]) { - s->current_pending[cpu] = best_irq; - if (best_prio < s->running_priority[cpu]) { - int group = GIC_DIST_TEST_GROUP(best_irq, cm); - - if (extract32(s->ctlr, group, 1) && - extract32(s->cpu_ctlr[cpu], group, 1)) { - if (group == 0 && s->cpu_ctlr[cpu] & GICC_CTLR_FIQ_EN) { + if (best_prio < s->priority_mask[cpu_iface]) { + s->current_pending[cpu_iface] = best_irq; + if (best_prio < s->running_priority[cpu_iface]) { + if (gic_irq_signaling_enabled(s, cpu, virt, 1 << group)) { + if (group == 0 && + s->cpu_ctlr[cpu_iface] & GICC_CTLR_FIQ_EN) { DPRINTF("Raised pending FIQ %d (cpu %d)\n", - best_irq, cpu); + best_irq, cpu_iface); fiq_level = 1; - trace_gic_update_set_irq(cpu, "fiq", fiq_level); + trace_gic_update_set_irq(cpu, virt ? "vfiq" : "fiq", + fiq_level); } else { DPRINTF("Raised pending IRQ %d (cpu %d)\n", - best_irq, cpu); + best_irq, cpu_iface); irq_level = 1; - trace_gic_update_set_irq(cpu, "irq", irq_level); + trace_gic_update_set_irq(cpu, virt ? "virq" : "irq", + irq_level); } } } } - qemu_set_irq(s->parent_irq[cpu], irq_level); - qemu_set_irq(s->parent_fiq[cpu], fiq_level); + qemu_set_irq(irq_lines[cpu], irq_level); + qemu_set_irq(fiq_lines[cpu], fiq_level); } } +static void gic_update(GICState *s) +{ + gic_update_internal(s, false); +} + /* Return true if this LR is empty, i.e. the corresponding bit * in ELRSR is set. */ @@ -XXX,XX +XXX,XX @@ static inline bool gic_lr_entry_is_eoi(uint32_t entry) && !GICH_LR_HW(entry) && GICH_LR_EOI(entry); } +static void gic_update_virt(GICState *s) +{ + gic_update_internal(s, true); +} + static void gic_set_irq_11mpcore(GICState *s, int irq, int level, int cm, int target) { @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) } } - gic_update(s); + if (gic_is_vcpu(cpu)) { + gic_update_virt(s); + } else { + gic_update(s); + } DPRINTF("ACK %d\n", irq); return ret; } @@ -XXX,XX +XXX,XX @@ static void gic_deactivate_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) */ int rcpu = gic_get_vcpu_real_id(cpu); s->h_hcr[rcpu] += 1 << R_GICH_HCR_EOICount_SHIFT; + + /* Update the virtual interface in case a maintenance interrupt should + * be raised. + */ + gic_update_virt(s); return; } @@ -XXX,XX +XXX,XX @@ static void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs) } } + gic_update_virt(s); return; } @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset, "gic_cpu_write: Bad offset %x\n", (int)offset); return MEMTX_OK; } - gic_update(s); + + if (gic_is_vcpu(cpu)) { + gic_update_virt(s); + } else { + gic_update(s); + } + return MEMTX_OK; } @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_hyp_write(void *opaque, int cpu, hwaddr addr, return MEMTX_OK; } + gic_update_virt(s); return MEMTX_OK; } -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Implement the maintenance interrupt generation that is part of the GICv2 virtualization extensions. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-18-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 97 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 97 insertions(+) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static inline bool gic_lr_entry_is_eoi(uint32_t entry) && !GICH_LR_HW(entry) && GICH_LR_EOI(entry); } +static inline void gic_extract_lr_info(GICState *s, int cpu, + int *num_eoi, int *num_valid, int *num_pending) +{ + int lr_idx; + + *num_eoi = 0; + *num_valid = 0; + *num_pending = 0; + + for (lr_idx = 0; lr_idx < s->num_lrs; lr_idx++) { + uint32_t *entry = &s->h_lr[lr_idx][cpu]; + + if (gic_lr_entry_is_eoi(*entry)) { + (*num_eoi)++; + } + + if (GICH_LR_STATE(*entry) != GICH_LR_STATE_INVALID) { + (*num_valid)++; + } + + if (GICH_LR_STATE(*entry) == GICH_LR_STATE_PENDING) { + (*num_pending)++; + } + } +} + +static void gic_compute_misr(GICState *s, int cpu) +{ + uint32_t value = 0; + int vcpu = cpu + GIC_NCPU; + + int num_eoi, num_valid, num_pending; + + gic_extract_lr_info(s, cpu, &num_eoi, &num_valid, &num_pending); + + /* EOI */ + if (num_eoi) { + value |= R_GICH_MISR_EOI_MASK; + } + + /* U: true if only 0 or 1 LR entry is valid */ + if ((s->h_hcr[cpu] & R_GICH_HCR_UIE_MASK) && (num_valid < 2)) { + value |= R_GICH_MISR_U_MASK; + } + + /* LRENP: EOICount is not 0 */ + if ((s->h_hcr[cpu] & R_GICH_HCR_LRENPIE_MASK) && + ((s->h_hcr[cpu] & R_GICH_HCR_EOICount_MASK) != 0)) { + value |= R_GICH_MISR_LRENP_MASK; + } + + /* NP: no pending interrupts */ + if ((s->h_hcr[cpu] & R_GICH_HCR_NPIE_MASK) && (num_pending == 0)) { + value |= R_GICH_MISR_NP_MASK; + } + + /* VGrp0E: group0 virq signaling enabled */ + if ((s->h_hcr[cpu] & R_GICH_HCR_VGRP0EIE_MASK) && + (s->cpu_ctlr[vcpu] & GICC_CTLR_EN_GRP0)) { + value |= R_GICH_MISR_VGrp0E_MASK; + } + + /* VGrp0D: group0 virq signaling disabled */ + if ((s->h_hcr[cpu] & R_GICH_HCR_VGRP0DIE_MASK) && + !(s->cpu_ctlr[vcpu] & GICC_CTLR_EN_GRP0)) { + value |= R_GICH_MISR_VGrp0D_MASK; + } + + /* VGrp1E: group1 virq signaling enabled */ + if ((s->h_hcr[cpu] & R_GICH_HCR_VGRP1EIE_MASK) && + (s->cpu_ctlr[vcpu] & GICC_CTLR_EN_GRP1)) { + value |= R_GICH_MISR_VGrp1E_MASK; + } + + /* VGrp1D: group1 virq signaling disabled */ + if ((s->h_hcr[cpu] & R_GICH_HCR_VGRP1DIE_MASK) && + !(s->cpu_ctlr[vcpu] & GICC_CTLR_EN_GRP1)) { + value |= R_GICH_MISR_VGrp1D_MASK; + } + + s->h_misr[cpu] = value; +} + +static void gic_update_maintenance(GICState *s) +{ + int cpu = 0; + int maint_level; + + for (cpu = 0; cpu < s->num_cpu; cpu++) { + gic_compute_misr(s, cpu); + maint_level = (s->h_hcr[cpu] & R_GICH_HCR_EN_MASK) && s->h_misr[cpu]; + + qemu_set_irq(s->maintenance_irq[cpu], maint_level); + } +} + static void gic_update_virt(GICState *s) { gic_update_internal(s, true); + gic_update_maintenance(s); } static void gic_set_irq_11mpcore(GICState *s, int irq, int level, -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Add some traces to the ARM GIC to catch register accesses (distributor, (v)cpu interface and virtual interface), and to take into account virtualization extensions (print `vcpu` instead of `cpu` when needed). Also add some virtualization extensions specific traces: LR updating and maintenance IRQ generation. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-19-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 31 +++++++++++++++++++++++++------ hw/intc/trace-events | 12 ++++++++++-- 2 files changed, 35 insertions(+), 8 deletions(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static inline void gic_update_internal(GICState *s, bool virt) } if (best_irq != 1023) { - trace_gic_update_bestirq(cpu, best_irq, best_prio, - s->priority_mask[cpu_iface], s->running_priority[cpu_iface]); + trace_gic_update_bestirq(virt ? "vcpu" : "cpu", cpu, + best_irq, best_prio, + s->priority_mask[cpu_iface], + s->running_priority[cpu_iface]); } irq_level = fiq_level = 0; @@ -XXX,XX +XXX,XX @@ static void gic_update_maintenance(GICState *s) gic_compute_misr(s, cpu); maint_level = (s->h_hcr[cpu] & R_GICH_HCR_EN_MASK) && s->h_misr[cpu]; + trace_gic_update_maintenance_irq(cpu, maint_level); qemu_set_irq(s->maintenance_irq[cpu], maint_level); } } @@ -XXX,XX +XXX,XX @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs) * is in the wrong group. */ irq = gic_get_current_pending_irq(s, cpu, attrs); - trace_gic_acknowledge_irq(gic_get_vcpu_real_id(cpu), irq); + trace_gic_acknowledge_irq(gic_is_vcpu(cpu) ? "vcpu" : "cpu", + gic_get_vcpu_real_id(cpu), irq); if (irq >= GIC_MAXIRQ) { DPRINTF("ACK, no pending interrupt or it is hidden: %d\n", irq); @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_dist_read(void *opaque, hwaddr offset, uint64_t *data, switch (size) { case 1: *data = gic_dist_readb(opaque, offset, attrs); - return MEMTX_OK; + break; case 2: *data = gic_dist_readb(opaque, offset, attrs); *data |= gic_dist_readb(opaque, offset + 1, attrs) << 8; - return MEMTX_OK; + break; case 4: *data = gic_dist_readb(opaque, offset, attrs); *data |= gic_dist_readb(opaque, offset + 1, attrs) << 8; *data |= gic_dist_readb(opaque, offset + 2, attrs) << 16; *data |= gic_dist_readb(opaque, offset + 3, attrs) << 24; - return MEMTX_OK; + break; default: return MEMTX_ERROR; } + + trace_gic_dist_read(offset, size, *data); + return MEMTX_OK; } static void gic_dist_writeb(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void gic_dist_writel(void *opaque, hwaddr offset, static MemTxResult gic_dist_write(void *opaque, hwaddr offset, uint64_t data, unsigned size, MemTxAttrs attrs) { + trace_gic_dist_write(offset, size, data); + switch (size) { case 1: gic_dist_writeb(opaque, offset, data, attrs); @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_read(GICState *s, int cpu, int offset, *data = 0; break; } + + trace_gic_cpu_read(gic_is_vcpu(cpu) ? "vcpu" : "cpu", + gic_get_vcpu_real_id(cpu), offset, *data); return MEMTX_OK; } static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset, uint32_t value, MemTxAttrs attrs) { + trace_gic_cpu_write(gic_is_vcpu(cpu) ? "vcpu" : "cpu", + gic_get_vcpu_real_id(cpu), offset, value); + switch (offset) { case 0x00: /* Control */ gic_set_cpu_control(s, cpu, value, attrs); @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_hyp_read(void *opaque, int cpu, hwaddr addr, return MEMTX_OK; } + trace_gic_hyp_read(addr, *data); return MEMTX_OK; } @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_hyp_write(void *opaque, int cpu, hwaddr addr, GICState *s = ARM_GIC(opaque); int vcpu = cpu + GIC_NCPU; + trace_gic_hyp_write(addr, value); + switch (addr) { case A_GICH_HCR: /* Hypervisor Control */ s->h_hcr[cpu] = value & GICH_HCR_MASK; @@ -XXX,XX +XXX,XX @@ static MemTxResult gic_hyp_write(void *opaque, int cpu, hwaddr addr, } s->h_lr[lr_idx][cpu] = value & GICH_LR_MASK; + trace_gic_lr_entry(cpu, lr_idx, s->h_lr[lr_idx][cpu]); break; } diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ aspeed_vic_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 gic_enable_irq(int irq) "irq %d enabled" gic_disable_irq(int irq) "irq %d disabled" gic_set_irq(int irq, int level, int cpumask, int target) "irq %d level %d cpumask 0x%x target 0x%x" -gic_update_bestirq(int cpu, int irq, int prio, int priority_mask, int running_priority) "cpu %d irq %d priority %d cpu priority mask %d cpu running priority %d" +gic_update_bestirq(const char *s, int cpu, int irq, int prio, int priority_mask, int running_priority) "%s %d irq %d priority %d cpu priority mask %d cpu running priority %d" gic_update_set_irq(int cpu, const char *name, int level) "cpu[%d]: %s = %d" -gic_acknowledge_irq(int cpu, int irq) "cpu %d acknowledged irq %d" +gic_acknowledge_irq(const char *s, int cpu, int irq) "%s %d acknowledged irq %d" +gic_cpu_write(const char *s, int cpu, int addr, uint32_t val) "%s %d iface write at 0x%08x 0x%08" PRIx32 +gic_cpu_read(const char *s, int cpu, int addr, uint32_t val) "%s %d iface read at 0x%08x: 0x%08" PRIx32 +gic_hyp_read(int addr, uint32_t val) "hyp read at 0x%08x: 0x%08" PRIx32 +gic_hyp_write(int addr, uint32_t val) "hyp write at 0x%08x: 0x%08" PRIx32 +gic_dist_read(int addr, unsigned int size, uint32_t val) "dist read at 0x%08x size %u: 0x%08" PRIx32 +gic_dist_write(int addr, unsigned int size, uint32_t val) "dist write at 0x%08x size %u: 0x%08" PRIx32 +gic_lr_entry(int cpu, int entry, uint32_t val) "cpu %d: new lr entry %d: 0x%08" PRIx32 +gic_update_maintenance_irq(int cpu, int val) "cpu %d: maintenance = %d" # hw/intc/arm_gicv3_cpuif.c gicv3_icc_pmr_read(uint32_t cpu, uint64_t val) "GICv3 ICC_PMR read cpu 0x%x value 0x%" PRIx64 -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> This commit improve the way the GIC is realized and connected in the ZynqMP SoC. The security extensions are enabled only if requested in the machine state. The same goes for the virtualization extensions. All the GIC to APU CPU(s) IRQ lines are now connected, including FIQ, vIRQ and vFIQ. The missing CPU to GIC timers IRQ connections are also added (HYP and SEC timers). The GIC maintenance IRQs are back-wired to the correct GIC PPIs. Finally, the MMIO mappings are reworked to take into account the ZynqMP specifics. The GIC (v)CPU interface is aliased 16 times: * for the first 0x1000 bytes from 0xf9010000 to 0xf901f000 * for the second 0x1000 bytes from 0xf9020000 to 0xf902f000 Mappings of the virtual interface and virtual CPU interface are mapped only when virtualization extensions are requested. The XlnxZynqMPGICRegion struct has been enhanced to be able to catch all this information. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20180727095421.386-20-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-zynqmp.h | 4 +- hw/arm/xlnx-zynqmp.c | 92 ++++++++++++++++++++++++++++++++---- 2 files changed, 86 insertions(+), 10 deletions(-) diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ #define XLNX_ZYNQMP_OCM_RAM_0_ADDRESS 0xFFFC0000 #define XLNX_ZYNQMP_OCM_RAM_SIZE 0x10000 -#define XLNX_ZYNQMP_GIC_REGIONS 2 +#define XLNX_ZYNQMP_GIC_REGIONS 6 /* ZynqMP maps the ARM GIC regions (GICC, GICD ...) at consecutive 64k offsets * and under-decodes the 64k region. This mirrors the 4k regions to every 4k @@ -XXX,XX +XXX,XX @@ */ #define XLNX_ZYNQMP_GIC_REGION_SIZE 0x1000 -#define XLNX_ZYNQMP_GIC_ALIASES (0x10000 / XLNX_ZYNQMP_GIC_REGION_SIZE - 1) +#define XLNX_ZYNQMP_GIC_ALIASES (0x10000 / XLNX_ZYNQMP_GIC_REGION_SIZE) #define XLNX_ZYNQMP_MAX_LOW_RAM_SIZE 0x80000000ull diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ #define ARM_PHYS_TIMER_PPI 30 #define ARM_VIRT_TIMER_PPI 27 +#define ARM_HYP_TIMER_PPI 26 +#define ARM_SEC_TIMER_PPI 29 +#define GIC_MAINTENANCE_PPI 25 #define GEM_REVISION 0x40070106 #define GIC_BASE_ADDR 0xf9000000 #define GIC_DIST_ADDR 0xf9010000 #define GIC_CPU_ADDR 0xf9020000 +#define GIC_VIFACE_ADDR 0xf9040000 +#define GIC_VCPU_ADDR 0xf9060000 #define SATA_INTR 133 #define SATA_ADDR 0xFD0C0000 @@ -XXX,XX +XXX,XX @@ static const int adma_ch_intr[XLNX_ZYNQMP_NUM_ADMA_CH] = { typedef struct XlnxZynqMPGICRegion { int region_index; uint32_t address; + uint32_t offset; + bool virt; } XlnxZynqMPGICRegion; static const XlnxZynqMPGICRegion xlnx_zynqmp_gic_regions[] = { - { .region_index = 0, .address = GIC_DIST_ADDR, }, - { .region_index = 1, .address = GIC_CPU_ADDR, }, + /* Distributor */ + { + .region_index = 0, + .address = GIC_DIST_ADDR, + .offset = 0, + .virt = false + }, + + /* CPU interface */ + { + .region_index = 1, + .address = GIC_CPU_ADDR, + .offset = 0, + .virt = false + }, + { + .region_index = 1, + .address = GIC_CPU_ADDR + 0x10000, + .offset = 0x1000, + .virt = false + }, + + /* Virtual interface */ + { + .region_index = 2, + .address = GIC_VIFACE_ADDR, + .offset = 0, + .virt = true + }, + + /* Virtual CPU interface */ + { + .region_index = 3, + .address = GIC_VCPU_ADDR, + .offset = 0, + .virt = true + }, + { + .region_index = 3, + .address = GIC_VCPU_ADDR + 0x10000, + .offset = 0x1000, + .virt = true + }, }; static inline int arm_gic_ppi_index(int cpu_nr, int ppi_index) @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) qdev_prop_set_uint32(DEVICE(&s->gic), "num-irq", GIC_NUM_SPI_INTR + 32); qdev_prop_set_uint32(DEVICE(&s->gic), "revision", 2); qdev_prop_set_uint32(DEVICE(&s->gic), "num-cpu", num_apus); + qdev_prop_set_bit(DEVICE(&s->gic), "has-security-extensions", s->secure); + qdev_prop_set_bit(DEVICE(&s->gic), + "has-virtualization-extensions", s->virt); /* Realize APUs before realizing the GIC. KVM requires this. */ for (i = 0; i < num_apus; i++) { @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) for (i = 0; i < XLNX_ZYNQMP_GIC_REGIONS; i++) { SysBusDevice *gic = SYS_BUS_DEVICE(&s->gic); const XlnxZynqMPGICRegion *r = &xlnx_zynqmp_gic_regions[i]; - MemoryRegion *mr = sysbus_mmio_get_region(gic, r->region_index); + MemoryRegion *mr; uint32_t addr = r->address; int j; - sysbus_mmio_map(gic, r->region_index, addr); + if (r->virt && !s->virt) { + continue; + } + mr = sysbus_mmio_get_region(gic, r->region_index); for (j = 0; j < XLNX_ZYNQMP_GIC_ALIASES; j++) { MemoryRegion *alias = &s->gic_mr[i][j]; - addr += XLNX_ZYNQMP_GIC_REGION_SIZE; memory_region_init_alias(alias, OBJECT(s), "zynqmp-gic-alias", mr, - 0, XLNX_ZYNQMP_GIC_REGION_SIZE); + r->offset, XLNX_ZYNQMP_GIC_REGION_SIZE); memory_region_add_subregion(system_memory, addr, alias); + + addr += XLNX_ZYNQMP_GIC_REGION_SIZE; } } @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i, qdev_get_gpio_in(DEVICE(&s->apu_cpu[i]), ARM_CPU_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + num_apus, + qdev_get_gpio_in(DEVICE(&s->apu_cpu[i]), + ARM_CPU_FIQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + num_apus * 2, + qdev_get_gpio_in(DEVICE(&s->apu_cpu[i]), + ARM_CPU_VIRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + num_apus * 3, + qdev_get_gpio_in(DEVICE(&s->apu_cpu[i]), + ARM_CPU_VFIQ)); irq = qdev_get_gpio_in(DEVICE(&s->gic), arm_gic_ppi_index(i, ARM_PHYS_TIMER_PPI)); - qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), 0, irq); + qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), GTIMER_PHYS, irq); irq = qdev_get_gpio_in(DEVICE(&s->gic), arm_gic_ppi_index(i, ARM_VIRT_TIMER_PPI)); - qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), 1, irq); + qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), GTIMER_VIRT, irq); + irq = qdev_get_gpio_in(DEVICE(&s->gic), + arm_gic_ppi_index(i, ARM_HYP_TIMER_PPI)); + qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), GTIMER_HYP, irq); + irq = qdev_get_gpio_in(DEVICE(&s->gic), + arm_gic_ppi_index(i, ARM_SEC_TIMER_PPI)); + qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), GTIMER_SEC, irq); + + if (s->virt) { + irq = qdev_get_gpio_in(DEVICE(&s->gic), + arm_gic_ppi_index(i, GIC_MAINTENANCE_PPI)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + num_apus * 4, irq); + } } if (s->has_rpu) { -- 2.18.0 From: Luc Michel <luc.michel@greensocs.com> Add support for GICv2 virtualization extensions by mapping the necessary I/O regions and connecting the maintenance IRQ lines. Declare those additions in the device tree and in the ACPI tables. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-21-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 4 +++- hw/arm/virt-acpi-build.c | 6 +++-- hw/arm/virt.c | 52 +++++++++++++++++++++++++++++++++------- 3 files changed, 50 insertions(+), 12 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ #define NUM_VIRTIO_TRANSPORTS 32 #define NUM_SMMU_IRQS 4 -#define ARCH_GICV3_MAINT_IRQ 9 +#define ARCH_GIC_MAINT_IRQ 9 #define ARCH_TIMER_VIRT_IRQ 11 #define ARCH_TIMER_S_EL1_IRQ 13 @@ -XXX,XX +XXX,XX @@ enum { VIRT_GIC_DIST, VIRT_GIC_CPU, VIRT_GIC_V2M, + VIRT_GIC_HYP, + VIRT_GIC_VCPU, VIRT_GIC_ITS, VIRT_GIC_REDIST, VIRT_GIC_REDIST2, diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) gicc->length = sizeof(*gicc); if (vms->gic_version == 2) { gicc->base_address = cpu_to_le64(memmap[VIRT_GIC_CPU].base); + gicc->gich_base_address = cpu_to_le64(memmap[VIRT_GIC_HYP].base); + gicc->gicv_base_address = cpu_to_le64(memmap[VIRT_GIC_VCPU].base); } gicc->cpu_interface_number = cpu_to_le32(i); gicc->arm_mpidr = cpu_to_le64(armcpu->mp_affinity); @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) if (arm_feature(&armcpu->env, ARM_FEATURE_PMU)) { gicc->performance_interrupt = cpu_to_le32(PPI(VIRTUAL_PMU_IRQ)); } - if (vms->virt && vms->gic_version == 3) { - gicc->vgic_interrupt = cpu_to_le32(PPI(ARCH_GICV3_MAINT_IRQ)); + if (vms->virt) { + gicc->vgic_interrupt = cpu_to_le32(PPI(ARCH_GIC_MAINT_IRQ)); } } diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry a15memmap[] = { [VIRT_GIC_DIST] = { 0x08000000, 0x00010000 }, [VIRT_GIC_CPU] = { 0x08010000, 0x00010000 }, [VIRT_GIC_V2M] = { 0x08020000, 0x00001000 }, + [VIRT_GIC_HYP] = { 0x08030000, 0x00010000 }, + [VIRT_GIC_VCPU] = { 0x08040000, 0x00010000 }, /* The space in between here is reserved for GICv3 CPU/vCPU/HYP */ [VIRT_GIC_ITS] = { 0x08080000, 0x00020000 }, /* This redistributor space allows up to 2*64kB*123 CPUs */ @@ -XXX,XX +XXX,XX @@ static void fdt_add_gic_node(VirtMachineState *vms) if (vms->virt) { qemu_fdt_setprop_cells(vms->fdt, nodename, "interrupts", - GIC_FDT_IRQ_TYPE_PPI, ARCH_GICV3_MAINT_IRQ, + GIC_FDT_IRQ_TYPE_PPI, ARCH_GIC_MAINT_IRQ, GIC_FDT_IRQ_FLAGS_LEVEL_HI); } } else { /* 'cortex-a15-gic' means 'GIC v2' */ qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", "arm,cortex-a15-gic"); - qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg", - 2, vms->memmap[VIRT_GIC_DIST].base, - 2, vms->memmap[VIRT_GIC_DIST].size, - 2, vms->memmap[VIRT_GIC_CPU].base, - 2, vms->memmap[VIRT_GIC_CPU].size); + if (!vms->virt) { + qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg", + 2, vms->memmap[VIRT_GIC_DIST].base, + 2, vms->memmap[VIRT_GIC_DIST].size, + 2, vms->memmap[VIRT_GIC_CPU].base, + 2, vms->memmap[VIRT_GIC_CPU].size); + } else { + qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg", + 2, vms->memmap[VIRT_GIC_DIST].base, + 2, vms->memmap[VIRT_GIC_DIST].size, + 2, vms->memmap[VIRT_GIC_CPU].base, + 2, vms->memmap[VIRT_GIC_CPU].size, + 2, vms->memmap[VIRT_GIC_HYP].base, + 2, vms->memmap[VIRT_GIC_HYP].size, + 2, vms->memmap[VIRT_GIC_VCPU].base, + 2, vms->memmap[VIRT_GIC_VCPU].size); + qemu_fdt_setprop_cells(vms->fdt, nodename, "interrupts", + GIC_FDT_IRQ_TYPE_PPI, ARCH_GIC_MAINT_IRQ, + GIC_FDT_IRQ_FLAGS_LEVEL_HI); + } } qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", vms->gic_phandle); @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, qemu_irq *pic) qdev_prop_set_uint32(gicdev, "redist-region-count[1]", MIN(smp_cpus - redist0_count, redist1_capacity)); } + } else { + if (!kvm_irqchip_in_kernel()) { + qdev_prop_set_bit(gicdev, "has-virtualization-extensions", + vms->virt); + } } qdev_init_nofail(gicdev); gicbusdev = SYS_BUS_DEVICE(gicdev); @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, qemu_irq *pic) } } else { sysbus_mmio_map(gicbusdev, 1, vms->memmap[VIRT_GIC_CPU].base); + if (vms->virt) { + sysbus_mmio_map(gicbusdev, 2, vms->memmap[VIRT_GIC_HYP].base); + sysbus_mmio_map(gicbusdev, 3, vms->memmap[VIRT_GIC_VCPU].base); + } } /* Wire the outputs from each CPU's generic timer and the GICv3 @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, qemu_irq *pic) ppibase + timer_irq[irq])); } - qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, - qdev_get_gpio_in(gicdev, ppibase - + ARCH_GICV3_MAINT_IRQ)); + if (type == 3) { + qemu_irq irq = qdev_get_gpio_in(gicdev, + ppibase + ARCH_GIC_MAINT_IRQ); + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", + 0, irq); + } else if (vms->virt) { + qemu_irq irq = qdev_get_gpio_in(gicdev, + ppibase + ARCH_GIC_MAINT_IRQ); + sysbus_connect_irq(gicbusdev, i + 4 * smp_cpus, irq); + } + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, qdev_get_gpio_in(gicdev, ppibase + VIRTUAL_PMU_IRQ)); -- 2.18.0 From: Adam Lackorzynski <adam@l4re.org> Use an int64_t as a return type to restore the negative check for arm_load_as. Signed-off-by: Adam Lackorzynski <adam@l4re.org> Message-id: 20180730173712.GG4987@os.inf.tu-dresden.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/boot.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static int do_arm_linux_init(Object *obj, void *opaque) return 0; } -static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, - uint64_t *lowaddr, uint64_t *highaddr, - int elf_machine, AddressSpace *as) +static int64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, + uint64_t *lowaddr, uint64_t *highaddr, + int elf_machine, AddressSpace *as) { bool elf_is64; union { @@ -XXX,XX +XXX,XX @@ static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, } elf_header; int data_swab = 0; bool big_endian; - uint64_t ret = -1; + int64_t ret = -1; Error *err = NULL; -- 2.18.0 If the "trap general exceptions" bit HCR_EL2.TGE is set, we must mask all virtual interrupts (as per DDI0487C.a D1.14.3). Implement this in arm_excp_unmasked(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180724115950.17316-2-peter.maydell@linaro.org --- target/arm/cpu.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, break; case EXCP_VFIQ: - if (secure || !(env->cp15.hcr_el2 & HCR_FMO)) { + if (secure || !(env->cp15.hcr_el2 & HCR_FMO) + || (env->cp15.hcr_el2 & HCR_TGE)) { /* VFIQs are only taken when hypervized and non-secure. */ return false; } return !(env->daif & PSTATE_F); case EXCP_VIRQ: - if (secure || !(env->cp15.hcr_el2 & HCR_IMO)) { + if (secure || !(env->cp15.hcr_el2 & HCR_IMO) + || (env->cp15.hcr_el2 & HCR_TGE)) { /* VIRQs are only taken when hypervized and non-secure. */ return false; } -- 2.18.0 Some debug registers can be trapped via MDCR_EL2 bits TDRA, TDOSA, and TDA, which we implement in the functions access_tdra(), access_tdosa() and access_tda(). If MDCR_EL2.TDE or HCR_EL2.TGE are 1, the TDRA, TDOSA and TDA bits should behave as if they were 1. Implement this by having the access functions check MDCR_EL2.TDE and HCR_EL2.TGE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180724115950.17316-3-peter.maydell@linaro.org --- target/arm/helper.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tdosa(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { int el = arm_current_el(env); + bool mdcr_el2_tdosa = (env->cp15.mdcr_el2 & MDCR_TDOSA) || + (env->cp15.mdcr_el2 & MDCR_TDE) || + (env->cp15.hcr_el2 & HCR_TGE); - if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TDOSA) - && !arm_is_secure_below_el3(env)) { + if (el < 2 && mdcr_el2_tdosa && !arm_is_secure_below_el3(env)) { return CP_ACCESS_TRAP_EL2; } if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TDOSA)) { @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tdra(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { int el = arm_current_el(env); + bool mdcr_el2_tdra = (env->cp15.mdcr_el2 & MDCR_TDRA) || + (env->cp15.mdcr_el2 & MDCR_TDE) || + (env->cp15.hcr_el2 & HCR_TGE); - if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TDRA) - && !arm_is_secure_below_el3(env)) { + if (el < 2 && mdcr_el2_tdra && !arm_is_secure_below_el3(env)) { return CP_ACCESS_TRAP_EL2; } if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TDA)) { @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tda(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { int el = arm_current_el(env); + bool mdcr_el2_tda = (env->cp15.mdcr_el2 & MDCR_TDA) || + (env->cp15.mdcr_el2 & MDCR_TDE) || + (env->cp15.hcr_el2 & HCR_TGE); - if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TDA) - && !arm_is_secure_below_el3(env)) { + if (el < 2 && mdcr_el2_tda && !arm_is_secure_below_el3(env)) { return CP_ACCESS_TRAP_EL2; } if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TDA)) { -- 2.18.0 Whene we raise a synchronous exception, if HCR_EL2.TGE is set then exceptions targeting NS EL1 must be redirected to EL2. Implement this in raise_exception() -- all synchronous exceptions go through this function. (Asynchronous exceptions go via arm_cpu_exec_interrupt(), which already honours HCR_EL2.TGE when it determines the target EL in arm_phys_excp_target_el().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180724115950.17316-4-peter.maydell@linaro.org --- target/arm/op_helper.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ static void raise_exception(CPUARMState *env, uint32_t excp, { CPUState *cs = CPU(arm_env_get_cpu(env)); + if ((env->cp15.hcr_el2 & HCR_TGE) && + target_el == 1 && !arm_is_secure(env)) { + /* + * Redirect NS EL1 exceptions to NS EL2. These are reported with + * their original syndrome register value, with the exception of + * SIMD/FP access traps, which are reported as uncategorized + * (see DDI0478C.a D1.10.4) + */ + target_el = 2; + if (syndrome >> ARM_EL_EC_SHIFT == EC_ADVSIMDFPACCESSTRAP) { + syndrome = syn_uncategorized(); + } + } + assert(!excp_is_internal(excp)); cs->exception_index = excp; env->exception.syndrome = syndrome; -- 2.18.0 The IMO, FMO and AMO bits in HCR_EL2 are defined to "behave as 1 for all purposes other than direct reads" if HCR_EL2.TGE is set and HCR_EL2.E2H is 0, and to "behave as 0 for all purposes other than direct reads" if HCR_EL2.TGE is set and HRC_EL2.E2H is 1. To avoid having to check E2H and TGE everywhere where we test IMO and FMO, provide accessors arm_hcr_el2_imo(), arm_hcr_el2_fmo()and arm_hcr_el2_amo(). We don't implement ARMv8.1-VHE yet, so the E2H case will never be true, but we include the logic to save effort when we eventually do get to that. (Note that in several of these callsites the change doesn't actually make a difference as either the callsite is handling TGE specially anyway, or the CPU can't get into that situation with TGE set; we change everywhere for consistency.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180724115950.17316-5-peter.maydell@linaro.org --- target/arm/cpu.h | 64 +++++++++++++++++++++++++++++++++++---- hw/intc/arm_gicv3_cpuif.c | 19 ++++++------ target/arm/helper.c | 6 ++-- 3 files changed, 71 insertions(+), 18 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) #define HCR_RW (1ULL << 31) #define HCR_CD (1ULL << 32) #define HCR_ID (1ULL << 33) +#define HCR_E2H (1ULL << 34) +/* + * When we actually implement ARMv8.1-VHE we should add HCR_E2H to + * HCR_MASK and then clear it again if the feature bit is not set in + * hcr_write(). + */ #define HCR_MASK ((1ULL << 34) - 1) #define SCR_NS (1U << 0) @@ -XXX,XX +XXX,XX @@ bool write_cpustate_to_list(ARMCPU *cpu); # define TARGET_VIRT_ADDR_SPACE_BITS 32 #endif +/** + * arm_hcr_el2_imo(): Return the effective value of HCR_EL2.IMO. + * Depending on the values of HCR_EL2.E2H and TGE, this may be + * "behaves as 1 for all purposes other than direct read/write" or + * "behaves as 0 for all purposes other than direct read/write" + */ +static inline bool arm_hcr_el2_imo(CPUARMState *env) +{ + switch (env->cp15.hcr_el2 & (HCR_TGE | HCR_E2H)) { + case HCR_TGE: + return true; + case HCR_TGE | HCR_E2H: + return false; + default: + return env->cp15.hcr_el2 & HCR_IMO; + } +} + +/** + * arm_hcr_el2_fmo(): Return the effective value of HCR_EL2.FMO. + */ +static inline bool arm_hcr_el2_fmo(CPUARMState *env) +{ + switch (env->cp15.hcr_el2 & (HCR_TGE | HCR_E2H)) { + case HCR_TGE: + return true; + case HCR_TGE | HCR_E2H: + return false; + default: + return env->cp15.hcr_el2 & HCR_FMO; + } +} + +/** + * arm_hcr_el2_amo(): Return the effective value of HCR_EL2.AMO. + */ +static inline bool arm_hcr_el2_amo(CPUARMState *env) +{ + switch (env->cp15.hcr_el2 & (HCR_TGE | HCR_E2H)) { + case HCR_TGE: + return true; + case HCR_TGE | HCR_E2H: + return false; + default: + return env->cp15.hcr_el2 & HCR_AMO; + } +} + static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, unsigned int target_el) { @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, break; case EXCP_VFIQ: - if (secure || !(env->cp15.hcr_el2 & HCR_FMO) - || (env->cp15.hcr_el2 & HCR_TGE)) { + if (secure || !arm_hcr_el2_fmo(env) || (env->cp15.hcr_el2 & HCR_TGE)) { /* VFIQs are only taken when hypervized and non-secure. */ return false; } return !(env->daif & PSTATE_F); case EXCP_VIRQ: - if (secure || !(env->cp15.hcr_el2 & HCR_IMO) - || (env->cp15.hcr_el2 & HCR_TGE)) { + if (secure || !arm_hcr_el2_imo(env) || (env->cp15.hcr_el2 & HCR_TGE)) { /* VIRQs are only taken when hypervized and non-secure. */ return false; } @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * to the CPSR.F setting otherwise we further assess the state * below. */ - hcr = (env->cp15.hcr_el2 & HCR_FMO); + hcr = arm_hcr_el2_fmo(env); scr = (env->cp15.scr_el3 & SCR_FIQ); /* When EL3 is 32-bit, the SCR.FW bit controls whether the @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * when setting the target EL, so it does not have a further * affect here. */ - hcr = (env->cp15.hcr_el2 & HCR_IMO); + hcr = arm_hcr_el2_imo(env); scr = false; break; default: diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static bool icv_access(CPUARMState *env, int hcr_flags) * * access if NS EL1 and either IMO or FMO == 1: * CTLR, DIR, PMR, RPR */ - return (env->cp15.hcr_el2 & hcr_flags) && arm_current_el(env) == 1 + bool flagmatch = ((hcr_flags & HCR_IMO) && arm_hcr_el2_imo(env)) || + ((hcr_flags & HCR_FMO) && arm_hcr_el2_fmo(env)); + + return flagmatch && arm_current_el(env) == 1 && !arm_is_secure_below_el3(env); } @@ -XXX,XX +XXX,XX @@ static void icc_dir_write(CPUARMState *env, const ARMCPRegInfo *ri, /* No need to include !IsSecure in route_*_to_el2 as it's only * tested in cases where we know !IsSecure is true. */ - route_fiq_to_el2 = env->cp15.hcr_el2 & HCR_FMO; - route_irq_to_el2 = env->cp15.hcr_el2 & HCR_IMO; + route_fiq_to_el2 = arm_hcr_el2_fmo(env); + route_irq_to_el2 = arm_hcr_el2_imo(env); switch (arm_current_el(env)) { case 3: @@ -XXX,XX +XXX,XX @@ static CPAccessResult gicv3_irqfiq_access(CPUARMState *env, switch (el) { case 1: if (arm_is_secure_below_el3(env) || - ((env->cp15.hcr_el2 & (HCR_IMO | HCR_FMO)) == 0)) { + (arm_hcr_el2_imo(env) == 0 && arm_hcr_el2_fmo(env) == 0)) { r = CP_ACCESS_TRAP_EL3; } break; @@ -XXX,XX +XXX,XX @@ static CPAccessResult gicv3_dir_access(CPUARMState *env, static CPAccessResult gicv3_sgi_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { - if ((env->cp15.hcr_el2 & (HCR_IMO | HCR_FMO)) && + if ((arm_hcr_el2_imo(env) || arm_hcr_el2_fmo(env)) && arm_current_el(env) == 1 && !arm_is_secure_below_el3(env)) { /* Takes priority over a possible EL3 trap */ return CP_ACCESS_TRAP_EL2; @@ -XXX,XX +XXX,XX @@ static CPAccessResult gicv3_fiq_access(CPUARMState *env, if (env->cp15.scr_el3 & SCR_FIQ) { switch (el) { case 1: - if (arm_is_secure_below_el3(env) || - ((env->cp15.hcr_el2 & HCR_FMO) == 0)) { + if (arm_is_secure_below_el3(env) || !arm_hcr_el2_fmo(env)) { r = CP_ACCESS_TRAP_EL3; } break; @@ -XXX,XX +XXX,XX @@ static CPAccessResult gicv3_irq_access(CPUARMState *env, if (env->cp15.scr_el3 & SCR_IRQ) { switch (el) { case 1: - if (arm_is_secure_below_el3(env) || - ((env->cp15.hcr_el2 & HCR_IMO) == 0)) { + if (arm_is_secure_below_el3(env) || !arm_hcr_el2_imo(env)) { r = CP_ACCESS_TRAP_EL3; } break; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, switch (excp_idx) { case EXCP_IRQ: scr = ((env->cp15.scr_el3 & SCR_IRQ) == SCR_IRQ); - hcr = ((env->cp15.hcr_el2 & HCR_IMO) == HCR_IMO); + hcr = arm_hcr_el2_imo(env); break; case EXCP_FIQ: scr = ((env->cp15.scr_el3 & SCR_FIQ) == SCR_FIQ); - hcr = ((env->cp15.hcr_el2 & HCR_FMO) == HCR_FMO); + hcr = arm_hcr_el2_fmo(env); break; default: scr = ((env->cp15.scr_el3 & SCR_EA) == SCR_EA); - hcr = ((env->cp15.hcr_el2 & HCR_AMO) == HCR_AMO); + hcr = arm_hcr_el2_amo(env); break; }; -- 2.18.0 One of the required effects of setting HCR_EL2.TGE is that when SCR_EL3.NS is 1 then SCTLR_EL1.M must behave as if it is zero for all purposes except direct reads. That is, it effectively disables the MMU for the NS EL0/EL1 translation regime. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180724115950.17316-6-peter.maydell@linaro.org --- target/arm/helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline bool regime_translation_disabled(CPUARMState *env, if (mmu_idx == ARMMMUIdx_S2NS) { return (env->cp15.hcr_el2 & HCR_VM) == 0; } + + if (env->cp15.hcr_el2 & HCR_TGE) { + /* TGE means that NS EL0/1 act as if SCTLR_EL1.M is zero */ + if (!regime_is_secure(env, mmu_idx) && regime_el(env, mmu_idx) == 1) { + return true; + } + } + return (regime_sctlr(env, mmu_idx) & SCTLR_M) == 0; } -- 2.18.0 Improve the exception-taken logging by logging in v7m_exception_taken() the exception we're going to take and whether it is secure/nonsecure. This requires us to move logging at many callsites from after the call to before it, so that the logging appears in a sensible order. (This will make tail-chaining produce more useful logs; for the current callers of v7m_exception_taken() we know which exception we're going to take, so custom log messages at the callsite sufficed; for tail-chaining only v7m_exception_taken() knows the exception number that we're going to tail-chain to.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180720145647.8810-2-peter.maydell@linaro.org --- target/arm/helper.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool push_failed = false; armv7m_nvic_get_pending_irq_info(env->nvic, &exc, &targets_secure); + qemu_log_mask(CPU_LOG_INT, "...taking pending %s exception %d\n", + targets_secure ? "secure" : "nonsecure", exc); if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, * we might now want to take a different exception which * targets a different security state, so try again from the top. */ + qemu_log_mask(CPU_LOG_INT, + "...derived exception on callee-saves register stacking"); v7m_exception_taken(cpu, lr, true, true); return; } if (!arm_v7m_load_vector(cpu, exc, targets_secure, &addr)) { /* Vector load failed: derived exception */ + qemu_log_mask(CPU_LOG_INT, "...derived exception on vector table load"); v7m_exception_taken(cpu, lr, true, true); return; } @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (sfault) { env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); - v7m_exception_taken(cpu, excret, true, false); qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " "stackframe: failed EXC_RETURN.ES validity check\n"); + v7m_exception_taken(cpu, excret, true, false); return; } @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); - v7m_exception_taken(cpu, excret, true, false); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " "stackframe: failed exception return integrity check\n"); + v7m_exception_taken(cpu, excret, true, false); return; } @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) /* Take a SecureFault on the current stack */ env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); - v7m_exception_taken(cpu, excret, true, false); qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " "stackframe: failed exception return integrity " "signature check\n"); + v7m_exception_taken(cpu, excret, true, false); return; } @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) /* v7m_stack_read() pended a fault, so take it (as a tail * chained exception on the same stack frame) */ + qemu_log_mask(CPU_LOG_INT, "...derived exception on unstacking\n"); v7m_exception_taken(cpu, excret, true, false); return; } @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; - v7m_exception_taken(cpu, excret, true, false); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " "stackframe: failed exception return integrity " "check\n"); + v7m_exception_taken(cpu, excret, true, false); return; } } @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, false); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; ignore_stackfaults = v7m_push_stack(cpu); - v7m_exception_taken(cpu, excret, false, ignore_stackfaults); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on new stackframe: " "failed exception return integrity check\n"); + v7m_exception_taken(cpu, excret, false, ignore_stackfaults); return; } @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) ignore_stackfaults = v7m_push_stack(cpu); v7m_exception_taken(cpu, lr, false, ignore_stackfaults); - qemu_log_mask(CPU_LOG_INT, "... as %d\n", env->v7m.exception); } /* Function used to synchronize QEMU's AArch64 register set with AArch32 -- 2.18.0 In do_v7m_exception_exit(), we use the exc_secure variable to track whether the exception we're returning from is secure or non-secure. Unfortunately the statement initializing this was accidentally inside an "if (env->v7m.exception != ARMV7M_EXCP_NMI)" conditional, which meant that we were using the wrong value for NMI handlers. Move the initialization out to the right place. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180720145647.8810-3-peter.maydell@linaro.org --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) /* For all other purposes, treat ES as 0 (R_HXSR) */ excret &= ~R_V7M_EXCRET_ES_MASK; } + exc_secure = excret & R_V7M_EXCRET_ES_MASK; } if (env->v7m.exception != ARMV7M_EXCP_NMI) { @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) * which security state's faultmask to clear. (v8M ARM ARM R_KBNF.) */ if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { - exc_secure = excret & R_V7M_EXCRET_ES_MASK; if (armv7m_nvic_raw_execution_priority(env->nvic) >= 0) { env->v7m.faultmask[exc_secure] = 0; } -- 2.18.0 On exception return for M-profile, we must restore the CONTROL.SPSEL bit from the EXCRET value before we do any kind of tailchaining, including for the derived exceptions on integrity check failures. Otherwise we will give the guest an incorrect EXCRET.SPSEL value on exception entry for the tailchained exception. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180720145647.8810-4-peter.maydell@linaro.org --- target/arm/helper.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } } + /* + * Set CONTROL.SPSEL from excret.SPSEL. Since we're still in + * Handler mode (and will be until we write the new XPSR.Interrupt + * field) this does not switch around the current stack pointer. + * We must do this before we do any kind of tailchaining, including + * for the derived exceptions on integrity check failures, or we will + * give the guest an incorrect EXCRET.SPSEL value on exception entry. + */ + write_v7m_control_spsel_for_secstate(env, return_to_sp_process, exc_secure); + if (sfault) { env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) return; } - /* Set CONTROL.SPSEL from excret.SPSEL. Since we're still in - * Handler mode (and will be until we write the new XPSR.Interrupt - * field) this does not switch around the current stack pointer. - */ - write_v7m_control_spsel_for_secstate(env, return_to_sp_process, exc_secure); - switch_v7m_security_state(env, return_to_secure); { -- 2.18.0 Tailchaining is an optimization in handling of exception return for M-profile cores: if we are about to pop the exception stack for an exception return, but there is a pending exception which is higher priority than the priority we are returning to, then instead of unstacking and then immediately taking the exception and stacking registers again, we can chain to the pending exception without unstacking and stacking. For v6M and v7M it is IMPDEF whether tailchaining happens for pending exceptions; for v8M this is architecturally required. Implement it in QEMU for all M-profile cores, since in practice v6M and v7M hardware implementations generally do have it. (We were already doing tailchaining for derived exceptions which happened during exception return, like the validity checks and stack access failures; these have always been required to be tailchained for all versions of the architecture.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180720145647.8810-5-peter.maydell@linaro.org --- target/arm/helper.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) return; } + /* + * Tailchaining: if there is currently a pending exception that + * is high enough priority to preempt execution at the level we're + * about to return to, then just directly take that exception now, + * avoiding an unstack-and-then-stack. Note that now we have + * deactivated the previous exception by calling armv7m_nvic_complete_irq() + * our current execution priority is already the execution priority we are + * returning to -- none of the state we would unstack or set based on + * the EXCRET value affects it. + */ + if (armv7m_nvic_can_take_pending_exception(env->nvic)) { + qemu_log_mask(CPU_LOG_INT, "...tailchaining to pending exception\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + switch_v7m_security_state(env, return_to_secure); { -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> The normal vector element is sign-extended before comparing with the wide vector element. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180801123111.3595-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(NAME)(void *vd, void *vn, void *vm, void *vg, uint32_t desc) \ #define DO_CMP_PPZW_S(NAME, TYPE, TYPEW, OP) \ DO_CMP_PPZW(NAME, TYPE, TYPEW, OP, H1_4, 0x1111111111111111ull) -DO_CMP_PPZW_B(sve_cmpeq_ppzw_b, uint8_t, uint64_t, ==) -DO_CMP_PPZW_H(sve_cmpeq_ppzw_h, uint16_t, uint64_t, ==) -DO_CMP_PPZW_S(sve_cmpeq_ppzw_s, uint32_t, uint64_t, ==) +DO_CMP_PPZW_B(sve_cmpeq_ppzw_b, int8_t, uint64_t, ==) +DO_CMP_PPZW_H(sve_cmpeq_ppzw_h, int16_t, uint64_t, ==) +DO_CMP_PPZW_S(sve_cmpeq_ppzw_s, int32_t, uint64_t, ==) -DO_CMP_PPZW_B(sve_cmpne_ppzw_b, uint8_t, uint64_t, !=) -DO_CMP_PPZW_H(sve_cmpne_ppzw_h, uint16_t, uint64_t, !=) -DO_CMP_PPZW_S(sve_cmpne_ppzw_s, uint32_t, uint64_t, !=) +DO_CMP_PPZW_B(sve_cmpne_ppzw_b, int8_t, uint64_t, !=) +DO_CMP_PPZW_H(sve_cmpne_ppzw_h, int16_t, uint64_t, !=) +DO_CMP_PPZW_S(sve_cmpne_ppzw_s, int32_t, uint64_t, !=) DO_CMP_PPZW_B(sve_cmpgt_ppzw_b, int8_t, int64_t, >) DO_CMP_PPZW_H(sve_cmpgt_ppzw_h, int16_t, int64_t, >) -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> Used the wrong temporary in the computation of subtractive overflow. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180801123111.3595-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_sat_addsub_64(TCGv_i64 reg, TCGv_i64 val, bool u, bool d) /* Detect signed overflow for subtraction. */ tcg_gen_xor_i64(t0, reg, val); tcg_gen_sub_i64(t1, reg, val); - tcg_gen_xor_i64(reg, reg, t0); + tcg_gen_xor_i64(reg, reg, t1); tcg_gen_and_i64(t0, t0, reg); /* Bound the result. */ -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> The pseudocode for this operation is an increment + compare loop, so comparing <= the maximum integer produces an all-true predicate. Rather than bound in both the inline code and the helper, pass the helper the number of predicate bits to set instead of the number of predicate elements to set. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180801123111.3595-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 5 ---- target/arm/translate-sve.c | 49 +++++++++++++++++++++++++------------- 2 files changed, 32 insertions(+), 22 deletions(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_while)(void *vd, uint32_t count, uint32_t pred_desc) return flags; } - /* Scale from predicate element count to bits. */ - count <<= esz; - /* Bound to the bits in the predicate. */ - count = MIN(count, oprsz * 8); - /* Set all of the requested bits. */ for (i = 0; i < count / 64; ++i) { d->p[i] = esz_mask; diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_CTERM(DisasContext *s, arg_CTERM *a, uint32_t insn) static bool trans_WHILE(DisasContext *s, arg_WHILE *a, uint32_t insn) { - if (!sve_access_check(s)) { - return true; - } - - TCGv_i64 op0 = read_cpu_reg(s, a->rn, 1); - TCGv_i64 op1 = read_cpu_reg(s, a->rm, 1); - TCGv_i64 t0 = tcg_temp_new_i64(); - TCGv_i64 t1 = tcg_temp_new_i64(); + TCGv_i64 op0, op1, t0, t1, tmax; TCGv_i32 t2, t3; TCGv_ptr ptr; unsigned desc, vsz = vec_full_reg_size(s); TCGCond cond; + if (!sve_access_check(s)) { + return true; + } + + op0 = read_cpu_reg(s, a->rn, 1); + op1 = read_cpu_reg(s, a->rm, 1); + if (!a->sf) { if (a->u) { tcg_gen_ext32u_i64(op0, op0); @@ -XXX,XX +XXX,XX @@ static bool trans_WHILE(DisasContext *s, arg_WHILE *a, uint32_t insn) /* For the helper, compress the different conditions into a computation * of how many iterations for which the condition is true. - * - * This is slightly complicated by 0 <= UINT64_MAX, which is nominally - * 2**64 iterations, overflowing to 0. Of course, predicate registers - * aren't that large, so any value >= predicate size is sufficient. */ + t0 = tcg_temp_new_i64(); + t1 = tcg_temp_new_i64(); tcg_gen_sub_i64(t0, op1, op0); - /* t0 = MIN(op1 - op0, vsz). */ - tcg_gen_movi_i64(t1, vsz); - tcg_gen_umin_i64(t0, t0, t1); + tmax = tcg_const_i64(vsz >> a->esz); if (a->eq) { /* Equality means one more iteration. */ tcg_gen_addi_i64(t0, t0, 1); + + /* If op1 is max (un)signed integer (and the only time the addition + * above could overflow), then we produce an all-true predicate by + * setting the count to the vector length. This is because the + * pseudocode is described as an increment + compare loop, and the + * max integer would always compare true. + */ + tcg_gen_movi_i64(t1, (a->sf + ? (a->u ? UINT64_MAX : INT64_MAX) + : (a->u ? UINT32_MAX : INT32_MAX))); + tcg_gen_movcond_i64(TCG_COND_EQ, t0, op1, t1, tmax, t0); } - /* t0 = (condition true ? t0 : 0). */ + /* Bound to the maximum. */ + tcg_gen_umin_i64(t0, t0, tmax); + tcg_temp_free_i64(tmax); + + /* Set the count to zero if the condition is false. */ cond = (a->u ? (a->eq ? TCG_COND_LEU : TCG_COND_LTU) : (a->eq ? TCG_COND_LE : TCG_COND_LT)); tcg_gen_movi_i64(t1, 0); tcg_gen_movcond_i64(cond, t0, op0, op1, t0, t1); + tcg_temp_free_i64(t1); + /* Since we're bounded, pass as a 32-bit type. */ t2 = tcg_temp_new_i32(); tcg_gen_extrl_i64_i32(t2, t0); tcg_temp_free_i64(t0); - tcg_temp_free_i64(t1); + + /* Scale elements to bits. */ + tcg_gen_shli_i32(t2, t2, a->esz); desc = (vsz / 8) - 2; desc = deposit32(desc, SIMD_DATA_SHIFT, 2, a->esz); -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180801123111.3595-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sve_movz_d)(void *vd, void *vn, void *vg, uint32_t desc) uint64_t *d = vd, *n = vn; uint8_t *pg = vg; for (i = 0; i < opr_sz; i += 1) { - d[i] = n[1] & -(uint64_t)(pg[H1(i)] & 1); + d[i] = n[i] & -(uint64_t)(pg[H1(i)] & 1); } } -- 2.18.0 Hi; here's another arm pullreq; main parts here are the new i.MX 8MM EVK board, and a lot of refactoring. thanks -- PMM The following changes since commit aa15257174da180c6a8a9d58f87319cfe61c5520: Merge tag 'pbouvier/pr/plugins-20260424' of https://gitlab.com/p-b-o/qemu into staging (2026-04-25 10:22:04 -0400) are available in the Git repository at: https://gitlab.com/pm215/qemu.git tags/pull-target-arm-20260427 for you to fetch changes up to 4575da5ecb7a27544aa6da1f78e700e8100ceaea: target/arm: report register in WFIT syndromes (2026-04-27 11:46:34 +0100) ---------------------------------------------------------------- target-arm queue: docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board target/arm: Build M-profile helper code once only hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header target/arm: Allow 'aarch64=off' to be set for TCG CPUs target/arm: Allow some sysregs to not have to be an exact match for migration hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices hw/arm/fsl-imx6ul: Implement LCDIF display device target/arm: Refactor syndrome value code to use registerfields target/arm: Report the register in WFxT syndromes ---------------------------------------------------------------- Alex Bennée (24): docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list target/arm: migrate basic syndrome helpers to registerfields target/arm: migrate system/cp trap syndromes to registerfields target/arm: migrate FP/SIMD trap syndromes to registerfields target/arm: migrate eret trap syndromes to registerfields target/arm: migrate SME trap syndromes to registerfields target/arm: migrate PAC trap syndromes to registerfields target/arm: migrate BTI trap syndromes to registerfields target/arm: migrate BXJ trap syndromes to registerfields target/arm: migrate Granule Protection traps to registerfields target/arm: migrate fault syndromes to registerfields target/arm: migrate debug syndromes to registerfields target/arm: migrate wfx syndromes to registerfields target/arm: migrate gcs syndromes to registerfields target/arm: migrate memory op syndromes to registerfields target/arm: migrate check_hcr_el2_trap to use syndrome helper target/arm: use syndrome helpers in arm_cpu_do_interrupt_aarch32_hyp target/arm: use syndrome helpers to set SAME_EL EC bit target/arm: make whpx use syndrome helpers for decode target/arm: make hvf use syndrome helpers for decode target/arm: use syndrome helpers in merge_syn_data_abort target/arm: use syndrome helpers to query VNCR bit target/arm: remove old syndrome defines target/arm: report register in WFIT syndromes Eric Auger (7): target/arm/cpu: Introduce the infrastructure for cpreg migration tolerances target/arm/machine: Handle ToleranceNotOnBothEnds migration tolerances target/arm/machine: Handle ToleranceOnlySrcTestValue migration tolerance target/arm/cpu64: Mitigate migration failures due to spurious TCR_EL1, PIRE0_EL1 and PIR_EL1 target/arm/cpu64: Define cpreg migration tolerance for KVM_REG_ARM_VENDOR_HYP_BMAP_2 target/arm/helper: Define cpreg migration tolerance for DGBDTR_EL0 Revert "target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat" Gaurav Sharma (15): hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board hw/misc/imx8mp_analog: Add property to analog device hw/arm/fsl-imx8mm: Add Analog device IP to iMX8MM SOC hw/arm/fsl-imx8mm: Add Clock Control Module IP to iMX8MM hw/arm/fsl-imx8mm: Implemented support for SNVS hw/arm/fsl-imx8mm: Adding support for USDHC storage controllers hw/arm/fsl-imx8mm: Add PCIe support hw/arm/fsl-imx8mm: Add GPIO controllers hw/arm/fsl-imx8mm: Adding support for I2C emulation hw/arm/fsl-imx8mm: Adding support for SPI controller hw/arm/fsl-imx8mm: Adding support for Watchdog Timers hw/arm/fsl-imx8mm: Adding support for General Purpose Timers hw/arm/fsl-imx8mm: Adding support for ENET ethernet controller hw/arm/fsl-imx8mm: Adding support for USB controller hw/arm/fsl-imx8mm: Adding functional testing of iMX8MM emulation Osama Abdelkader (1): hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices Peter Maydell (4): hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header target/arm: Clear AArch64 ID regs from ARMISARegisters if AArch64 disabled target/arm: Allow 'aarch64=off' to be set for TCG CPUs tests/functional/aarch64: Add basic test of TCG aarch64=off Philippe Mathieu-Daudé (9): target/arm: Ignore endianness when setting MTE tags target/arm: Explode MO_TExx -> MO_TE | MO_xx target/arm: Hoist MO_TE into mve_advance_vpt() target/arm: Hoist MO_TE into MVE DO_VSTR() macro target/arm: Introduce mo_endian() helper target/arm: Replace MO_TE -> mo_endian() for MVE helpers target/arm: Compile mve_helper.c once target/arm: Replace MO_TE -> mo_endian() for Cortex-M helpers target/arm: Compile m_helper.c once Thomas Huth (1): hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register Yucai Liu (2): hw/display: Add i.MX6UL LCDIF device model hw/arm/fsl-imx6ul: Wire in the LCDIF device model MAINTAINERS | 16 +- docs/system/arm/cpu-features.rst | 10 +- docs/system/arm/emulation.rst | 2 + docs/system/arm/{imx8mp-evk.rst => imx8m.rst} | 49 +- docs/system/target-arm.rst | 2 +- hw/arm/Kconfig | 25 + hw/arm/fsl-imx6ul.c | 12 +- hw/arm/fsl-imx8mm.c | 704 ++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 130 ++++ hw/arm/integratorcp.c | 3 - hw/arm/meson.build | 2 + hw/arm/raspi4b.c | 10 +- hw/arm/realview.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 1 - hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++ hw/display/meson.build | 1 + hw/misc/arm_sysctl.c | 2 +- hw/misc/imx8mp_analog.c | 12 +- hw/timer/imx_gpt.c | 26 + hw/vmapple/vmapple.c | 1 - include/hw/arm/fsl-imx6ul.h | 4 +- include/hw/arm/fsl-imx8mm.h | 242 ++++++++ include/hw/arm/primecell.h | 12 - include/hw/display/imx6ul_lcdif.h | 37 ++ include/hw/misc/arm_sysctl.h | 16 + include/hw/misc/imx8mp_analog.h | 3 + include/hw/timer/imx_gpt.h | 2 + target/arm/cpu-features.h | 5 + target/arm/cpu.c | 153 ++++- target/arm/cpu.h | 4 +- target/arm/cpu64.c | 39 ++ target/arm/debug_helper.c | 29 - target/arm/helper.c | 27 +- target/arm/hvf/hvf.c | 14 +- target/arm/internals.h | 60 ++ target/arm/machine.c | 33 +- target/arm/syndrome.h | 595 ++++++++++++++---- target/arm/tcg/debug.c | 2 +- target/arm/tcg/helper-a64.c | 2 +- target/arm/tcg/helper-defs.h | 2 +- target/arm/tcg/m_helper.c | 8 +- target/arm/tcg/meson.build | 6 +- target/arm/tcg/mve_helper.c | 102 ++-- target/arm/tcg/op_helper.c | 7 +- target/arm/tcg/tlb_helper.c | 6 +- target/arm/tcg/translate-a64.c | 2 +- target/arm/tcg/vfp_helper.c | 5 +- target/arm/trace-events | 2 + target/arm/whpx/whpx-all.c | 13 +- tests/functional/aarch64/meson.build | 3 + tests/functional/aarch64/test_imx8mm_evk.py | 69 +++ tests/functional/aarch64/test_virt_aarch64_off.py | 37 ++ tests/qtest/arm-cpu-features.c | 8 +- 55 files changed, 2743 insertions(+), 275 deletions(-) rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%) create mode 100644 hw/arm/fsl-imx8mm.c create mode 100644 hw/arm/imx8mm-evk.c create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/arm/fsl-imx8mm.h delete mode 100644 include/hw/arm/primecell.h create mode 100644 include/hw/display/imx6ul_lcdif.h create mode 100644 include/hw/misc/arm_sysctl.h create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py From: Alex Bennée <alex.bennee@linaro.org> This is just a documentation tweak as we already support both. FEAT_AA32 implies FEAT_AA32EL0. FEAT_AA64 implies FEAT_AA64EL[0123]. This is however useful if you are using emulation.rst as a source of truth of what QEMU emulates and when cross checking with Features.json from Arm. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260421093506.616307-1-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 2 ++ 1 file changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ QEMU's TCG emulation includes support for the Armv5, Armv6, Armv7, Armv8 and Armv9 versions of the A-profile architecture. It also has support for the following architecture extensions: +- FEAT_AA32 (PE Support for AArch32) - FEAT_AA32BF16 (AArch32 BFloat16 instructions) - FEAT_AA32EL0 (Support for AArch32 at EL0) - FEAT_AA32EL1 (Support for AArch32 at EL1) @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_AA32EL3 (Support for AArch32 at EL3) - FEAT_AA32HPD (AArch32 hierarchical permission disables) - FEAT_AA32I8MM (AArch32 Int8 matrix multiplication instructions) +- FEAT_AA64 (PE uses AArch64 after last reboot) - FEAT_AA64EL0 (Support for AArch64 at EL0) - FEAT_AA64EL1 (Support for AArch64 at EL1) - FEAT_AA64EL2 (Support for AArch64 at EL2) -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Implemented CPUs, RAM, UARTs and Interrupt Controller Other peripherals are represented as TYPE_UNIMPLEMENTED_DEVICE Complete memory map of the SoC is provided. Set default RAM size to 2GB and default CPU count to 4 to match the real i.MX8MM EVK hardware configuration. Documentation is shared with imx8mp-evk to avoid duplication. Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> [PMM: fixed over-long lines in doc] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 11 +- docs/system/arm/{imx8mp-evk.rst => imx8m.rst} | 49 ++- docs/system/target-arm.rst | 2 +- hw/arm/Kconfig | 12 + hw/arm/fsl-imx8mm.c | 377 ++++++++++++++++++ hw/arm/imx8mm-evk.c | 112 ++++++ hw/arm/meson.build | 2 + include/hw/arm/fsl-imx8mm.h | 158 ++++++++ 8 files changed, 709 insertions(+), 14 deletions(-) rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%) create mode 100644 hw/arm/fsl-imx8mm.c create mode 100644 hw/arm/imx8mm-evk.c create mode 100644 include/hw/arm/fsl-imx8mm.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/pci-host/designware.c F: include/hw/pci-host/designware.h F: docs/system/arm/mcimx7d-sabre.rst +MCIMX8MM-EVK / iMX8MM +M: Gaurav Sharma <gaurav.sharma_7@nxp.com> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/fsl-imx8mm.c +F: hw/arm/imx8mm-evk.c +F: include/hw/arm/fsl-imx8mm.h +F: docs/system/arm/imx8m.rst + MCIMX8MP-EVK / i.MX8MP M: Bernhard Beschow <shentey@gmail.com> L: qemu-arm@nongnu.org @@ -XXX,XX +XXX,XX @@ F: hw/rtc/rs5c372.c F: include/hw/arm/fsl-imx8mp.h F: include/hw/misc/imx8mp_*.h F: include/hw/pci-host/fsl_imx8m_phy.h -F: docs/system/arm/imx8mp-evk.rst +F: docs/system/arm/imx8m.rst F: tests/functional/aarch64/test_imx8mp_evk.py F: tests/qtest/rs5c372-test.c diff --git a/docs/system/arm/imx8mp-evk.rst b/docs/system/arm/imx8m.rst similarity index 58% rename from docs/system/arm/imx8mp-evk.rst rename to docs/system/arm/imx8m.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/imx8mp-evk.rst +++ b/docs/system/arm/imx8m.rst @@ -XXX,XX +XXX,XX @@ -NXP i.MX 8M Plus Evaluation Kit (``imx8mp-evk``) -================================================ +NXP i.MX 8M Plus and i.MX 8M Mini Evaluation Kits (``imx8mp-evk``, ``imx8mm-evk``) +================================================================================== -The ``imx8mp-evk`` machine models the i.MX 8M Plus Evaluation Kit, based on an -i.MX 8M Plus SoC. +The ``imx8mp-evk`` and ``imx8mm-evk`` machine models the i.MX 8M Plus +and i.MX 8M Mini Evaluation Kits, based on i.MX 8M Plus and i.MX8M +Mini SoCs. Supported devices ----------------- -The ``imx8mp-evk`` machine implements the following devices: +The ``imx8mp-evk`` and ``imx8mm-evk`` machines implement the +following devices: * Up to 4 Cortex-A53 cores * Generic Interrupt Controller (GICv3) @@ -XXX,XX +XXX,XX @@ The ``imx8mp-evk`` machine implements the following devices: Boot options ------------ -The ``imx8mp-evk`` machine can start a Linux kernel directly using the standard -``-kernel`` functionality. +The ``imx8mp-evk`` and ``imx8mm-evk`` machines can start a Linux +kernel directly using the standard ``-kernel`` functionality. Direct Linux Kernel Boot '''''''''''''''''''''''' @@ -XXX,XX +XXX,XX @@ is to generate an image with Buildroot. Version 2024.11.1 is tested at the time of writing and involves two steps. First run the following commands in the toplevel directory of the Buildroot source tree: +For i.MX 8M Plus EVK: + .. code-block:: bash $ make freescale_imx8mpevk_defconfig $ make +For i.MX 8M Mini EVK: + +.. code-block:: bash + + $ make freescale_imx8mmevk_defconfig + $ make + Once finished successfully there is an ``output/image`` subfolder. Navigate into it and resize the SD card image to a power of two: @@ -XXX,XX +XXX,XX @@ it and resize the SD card image to a power of two: Now that everything is prepared the machine can be started as follows: +For i.MX 8M Plus EVK: + .. code-block:: bash $ qemu-system-aarch64 -M imx8mp-evk \ @@ -XXX,XX +XXX,XX @@ Now that everything is prepared the machine can be started as follows: -append "root=/dev/mmcblk2p2" \ -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2 +For i.MX 8M Mini EVK: + +.. code-block:: bash + + $ qemu-system-aarch64 -M imx8mm-evk -smp 4 -m 2G \ + -display none -serial null -serial stdio \ + -kernel Image \ + -dtb imx8mm-evk.dtb \ + -append "root=/dev/mmcblk2p2" \ + -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2 KVM Acceleration ---------------- @@ -XXX,XX +XXX,XX @@ To enable hardware-assisted acceleration via KVM, append ``-accel kvm`` to the command line. While this speeds up performance significantly, be aware of the following limitations: -* The ``imx8mp-evk`` machine is not included under the "virtualization use case" - of :doc:`QEMU's security policy </system/security>`. This means that you - should not trust that it can contain malicious guests, whether it is run - using TCG or KVM. If you don't trust your guests and you're relying on QEMU to - be the security boundary, you want to choose another machine such as ``virt``. +* The ``imx8mp-evk`` and ``imx8mm-evk`` machines are not included + under the "virtualization use case" of :doc:`QEMU's security + policy </system/security>`. This means that you should not trust that + it can contain malicious guests, whether it is run using TCG or KVM. + If you don't trust your guests and you're relying on QEMU to be the + security boundary, you want to choose another machine such as + ``virt``. * Rather than Cortex-A53 CPUs, the same CPU type as the host's will be used. This is a limitation of KVM and may not work with guests with a tight dependency on Cortex-A53. diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ Board-specific documentation arm/imx25-pdk arm/mcimx6ul-evk arm/mcimx7d-sabre - arm/imx8mp-evk + arm/imx8m arm/orangepi arm/raspi arm/collie diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK depends on TCG select FSL_IMX8MP +config FSL_IMX8MM + bool + select ARM_GIC + select IMX + +config FSL_IMX8MM_EVK + bool + default y + depends on AARCH64 + depends on TCG + select FSL_IMX8MM + config ARM_SMMUV3_ACCEL bool depends on ARM_SMMUV3 diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ +/* + * i.MX 8MM SoC Implementation + * + * Based on hw/arm/fsl-imx6.c + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * iMX8MM Reference Manual - https://www.nxp.com/products/i.MX8MMINI -> Documentation + */ + +#include "qemu/osdep.h" +#include "system/address-spaces.h" +#include "hw/arm/bsa.h" +#include "hw/arm/fsl-imx8mm.h" +#include "hw/misc/unimp.h" +#include "hw/core/boards.h" +#include "system/kvm.h" +#include "system/system.h" +#include "target/arm/cpu.h" +#include "target/arm/cpu-qom.h" +#include "target/arm/kvm_arm.h" +#include "qapi/error.h" +#include "qobject/qlist.h" + +static const struct { + hwaddr addr; + size_t size; + const char *name; +} fsl_imx8mm_memmap[] = { + [FSL_IMX8MM_RAM] = { FSL_IMX8MM_RAM_START, FSL_IMX8MM_RAM_SIZE_MAX, "ram" }, + [FSL_IMX8MM_DDR_PHY_BROADCAST] = { 0x3dc00000, 4 * MiB, "ddr_phy_broadcast" }, + [FSL_IMX8MM_DDR_PERF_MON] = { 0x3d800000, 4 * MiB, "ddr_perf_mon" }, + [FSL_IMX8MM_DDR_CTL] = { 0x3d400000, 4 * MiB, "ddr_ctl" }, + [FSL_IMX8MM_DDR_PHY] = { 0x3c000000, 16 * MiB, "ddr_phy" }, + [FSL_IMX8MM_GIC_DIST] = { 0x38800000, 512 * KiB, "gic_dist" }, + [FSL_IMX8MM_GIC_REDIST] = { 0x38880000, 512 * KiB, "gic_redist" }, + [FSL_IMX8MM_VPU] = { 0x38340000, 2 * MiB, "vpu" }, + [FSL_IMX8MM_VPU_BLK_CTRL] = { 0x38330000, 2 * MiB, "vpu_blk_ctrl" }, + [FSL_IMX8MM_VPU_G2_DECODER] = { 0x38310000, 1 * MiB, "vpu_g2_decoder" }, + [FSL_IMX8MM_VPU_G1_DECODER] = { 0x38300000, 1 * MiB, "vpu_g1_decoder" }, + [FSL_IMX8MM_USB2_OTG] = { 0x32e50200, 0x200, "usb2_otg" }, + [FSL_IMX8MM_USB2] = { 0x32e50000, 0x200, "usb2" }, + [FSL_IMX8MM_USB1_OTG] = { 0x32e40200, 0x200, "usb1_otg" }, + [FSL_IMX8MM_USB1] = { 0x32e40000, 0x200, "usb1" }, + [FSL_IMX8MM_GPU2D] = { 0x38000000, 64 * KiB, "gpu2d" }, + [FSL_IMX8MM_QSPI1_RX_BUFFER] = { 0x34000000, 32 * MiB, "qspi1_rx_buffer" }, + [FSL_IMX8MM_PCIE1] = { 0x33800000, 4 * MiB, "pcie1" }, + [FSL_IMX8MM_QSPI1_TX_BUFFER] = { 0x33008000, 32 * KiB, "qspi1_tx_buffer" }, + [FSL_IMX8MM_APBH_DMA] = { 0x33000000, 32 * KiB, "apbh_dma" }, + + /* AIPS-4 Begin */ + [FSL_IMX8MM_TZASC] = { 0x32f80000, 64 * KiB, "tzasc" }, + [FSL_IMX8MM_PCIE_PHY1] = { 0x32f00000, 64 * KiB, "pcie_phy1" }, + [FSL_IMX8MM_MEDIA_BLK_CTL] = { 0x32e28000, 256, "media_blk_ctl" }, + [FSL_IMX8MM_LCDIF] = { 0x32e00000, 64 * KiB, "lcdif" }, + [FSL_IMX8MM_MIPI_DSI] = { 0x32e10000, 64 * KiB, "mipi_dsi" }, + [FSL_IMX8MM_MIPI_CSI] = { 0x32e30000, 64 * KiB, "mipi_csi" }, + [FSL_IMX8MM_AIPS4_CONFIGURATION] = { 0x32df0000, 64 * KiB, "aips4_configuration" }, + /* AIPS-4 End */ + + [FSL_IMX8MM_INTERCONNECT] = { 0x32700000, 1 * MiB, "interconnect" }, + + /* AIPS-3 Begin */ + [FSL_IMX8MM_ENET1] = { 0x30be0000, 64 * KiB, "enet1" }, + [FSL_IMX8MM_SDMA1] = { 0x30bd0000, 64 * KiB, "sdma1" }, + [FSL_IMX8MM_QSPI] = { 0x30bb0000, 64 * KiB, "qspi" }, + [FSL_IMX8MM_USDHC3] = { 0x30b60000, 64 * KiB, "usdhc3" }, + [FSL_IMX8MM_USDHC2] = { 0x30b50000, 64 * KiB, "usdhc2" }, + [FSL_IMX8MM_USDHC1] = { 0x30b40000, 64 * KiB, "usdhc1" }, + [FSL_IMX8MM_SEMAPHORE_HS] = { 0x30ac0000, 64 * KiB, "semaphore_hs" }, + [FSL_IMX8MM_MU_B] = { 0x30ab0000, 64 * KiB, "mu_b" }, + [FSL_IMX8MM_MU_A] = { 0x30aa0000, 64 * KiB, "mu_a" }, + [FSL_IMX8MM_UART4] = { 0x30a60000, 64 * KiB, "uart4" }, + [FSL_IMX8MM_I2C4] = { 0x30a50000, 64 * KiB, "i2c4" }, + [FSL_IMX8MM_I2C3] = { 0x30a40000, 64 * KiB, "i2c3" }, + [FSL_IMX8MM_I2C2] = { 0x30a30000, 64 * KiB, "i2c2" }, + [FSL_IMX8MM_I2C1] = { 0x30a20000, 64 * KiB, "i2c1" }, + [FSL_IMX8MM_AIPS3_CONFIGURATION] = { 0x309f0000, 64 * KiB, "aips3_configuration" }, + [FSL_IMX8MM_CAAM] = { 0x30900000, 256 * KiB, "caam" }, + [FSL_IMX8MM_SPBA1] = { 0x308f0000, 64 * KiB, "spba1" }, + [FSL_IMX8MM_UART2] = { 0x30890000, 64 * KiB, "uart2" }, + [FSL_IMX8MM_UART3] = { 0x30880000, 64 * KiB, "uart3" }, + [FSL_IMX8MM_UART1] = { 0x30860000, 64 * KiB, "uart1" }, + [FSL_IMX8MM_ECSPI3] = { 0x30840000, 64 * KiB, "ecspi3" }, + [FSL_IMX8MM_ECSPI2] = { 0x30830000, 64 * KiB, "ecspi2" }, + [FSL_IMX8MM_ECSPI1] = { 0x30820000, 64 * KiB, "ecspi1" }, + /* AIPS-3 End */ + + /* AIPS-2 Begin */ + [FSL_IMX8MM_QOSC] = { 0x307f0000, 64 * KiB, "qosc" }, + [FSL_IMX8MM_PERFMON2] = { 0x307d0000, 64 * KiB, "perfmon2" }, + [FSL_IMX8MM_PERFMON1] = { 0x307c0000, 64 * KiB, "perfmon1" }, + [FSL_IMX8MM_GPT4] = { 0x30700000, 64 * KiB, "gpt4" }, + [FSL_IMX8MM_GPT5] = { 0x306f0000, 64 * KiB, "gpt5" }, + [FSL_IMX8MM_GPT6] = { 0x306e0000, 64 * KiB, "gpt6" }, + [FSL_IMX8MM_SYSCNT_CTRL] = { 0x306c0000, 64 * KiB, "syscnt_ctrl" }, + [FSL_IMX8MM_SYSCNT_CMP] = { 0x306b0000, 64 * KiB, "syscnt_cmp" }, + [FSL_IMX8MM_SYSCNT_RD] = { 0x306a0000, 64 * KiB, "syscnt_rd" }, + [FSL_IMX8MM_PWM4] = { 0x30690000, 64 * KiB, "pwm4" }, + [FSL_IMX8MM_PWM3] = { 0x30680000, 64 * KiB, "pwm3" }, + [FSL_IMX8MM_PWM2] = { 0x30670000, 64 * KiB, "pwm2" }, + [FSL_IMX8MM_PWM1] = { 0x30660000, 64 * KiB, "pwm1" }, + [FSL_IMX8MM_AIPS2_CONFIGURATION] = { 0x305f0000, 64 * KiB, "aips2_configuration" }, + /* AIPS-2 End */ + + /* AIPS-1 Begin */ + [FSL_IMX8MM_CSU] = { 0x303e0000, 64 * KiB, "csu" }, + [FSL_IMX8MM_RDC] = { 0x303d0000, 64 * KiB, "rdc" }, + [FSL_IMX8MM_SEMAPHORE2] = { 0x303c0000, 64 * KiB, "semaphore2" }, + [FSL_IMX8MM_SEMAPHORE1] = { 0x303b0000, 64 * KiB, "semaphore1" }, + [FSL_IMX8MM_GPC] = { 0x303a0000, 64 * KiB, "gpc" }, + [FSL_IMX8MM_SRC] = { 0x30390000, 64 * KiB, "src" }, + [FSL_IMX8MM_CCM] = { 0x30380000, 64 * KiB, "ccm" }, + [FSL_IMX8MM_SNVS_HP] = { 0x30370000, 64 * KiB, "snvs_hp" }, + [FSL_IMX8MM_ANA_PLL] = { 0x30360000, 64 * KiB, "ana_pll" }, + [FSL_IMX8MM_OCOTP_CTRL] = { 0x30350000, 64 * KiB, "ocotp_ctrl" }, + [FSL_IMX8MM_IOMUXC_GPR] = { 0x30340000, 64 * KiB, "iomuxc_gpr" }, + [FSL_IMX8MM_IOMUXC] = { 0x30330000, 64 * KiB, "iomuxc" }, + [FSL_IMX8MM_GPT3] = { 0x302f0000, 64 * KiB, "gpt3" }, + [FSL_IMX8MM_GPT2] = { 0x302e0000, 64 * KiB, "gpt2" }, + [FSL_IMX8MM_GPT1] = { 0x302d0000, 64 * KiB, "gpt1" }, + [FSL_IMX8MM_SDMA2] = { 0x302c0000, 64 * KiB, "sdma2" }, + [FSL_IMX8MM_SDMA3] = { 0x302b0000, 64 * KiB, "sdma3" }, + [FSL_IMX8MM_WDOG3] = { 0x302a0000, 64 * KiB, "wdog3" }, + [FSL_IMX8MM_WDOG2] = { 0x30290000, 64 * KiB, "wdog2" }, + [FSL_IMX8MM_WDOG1] = { 0x30280000, 64 * KiB, "wdog1" }, + [FSL_IMX8MM_ANA_OSC] = { 0x30270000, 64 * KiB, "ana_osc" }, + [FSL_IMX8MM_ANA_TSENSOR] = { 0x30260000, 64 * KiB, "ana_tsensor" }, + [FSL_IMX8MM_GPIO5] = { 0x30240000, 64 * KiB, "gpio5" }, + [FSL_IMX8MM_GPIO4] = { 0x30230000, 64 * KiB, "gpio4" }, + [FSL_IMX8MM_GPIO3] = { 0x30220000, 64 * KiB, "gpio3" }, + [FSL_IMX8MM_GPIO2] = { 0x30210000, 64 * KiB, "gpio2" }, + [FSL_IMX8MM_GPIO1] = { 0x30200000, 64 * KiB, "gpio1" }, + [FSL_IMX8MM_AIPS1_CONFIGURATION] = { 0x301f0000, 64 * KiB, "aips1_configuration" }, + [FSL_IMX8MM_SAI6] = { 0x30060000, 64 * KiB, "sai6" }, + [FSL_IMX8MM_SAI5] = { 0x30050000, 64 * KiB, "sai5" }, + [FSL_IMX8MM_SAI3] = { 0x30030000, 64 * KiB, "sai3" }, + [FSL_IMX8MM_SAI2] = { 0x30020000, 64 * KiB, "sai2" }, + [FSL_IMX8MM_SAI1] = { 0x30010000, 64 * KiB, "sai1" }, + + /* AIPS-1 End */ + + [FSL_IMX8MM_A53_DAP] = { 0x28000000, 16 * MiB, "a53_dap" }, + [FSL_IMX8MM_PCIE1_MEM] = { 0x18000000, 128 * MiB, "pcie1_mem" }, + [FSL_IMX8MM_QSPI_MEM] = { 0x08000000, 256 * MiB, "qspi_mem" }, + [FSL_IMX8MM_OCRAM] = { 0x00900000, 256 * KiB, "ocram" }, + [FSL_IMX8MM_TCM_DTCM] = { 0x00800000, 128 * KiB, "tcm_dtcm" }, + [FSL_IMX8MM_TCM_ITCM] = { 0x007e0000, 128 * KiB, "tcm_itcm" }, + [FSL_IMX8MM_OCRAM_S] = { 0x00180000, 32 * KiB, "ocram_s" }, + [FSL_IMX8MM_CAAM_MEM] = { 0x00100000, 32 * KiB, "caam_mem" }, + [FSL_IMX8MM_BOOT_ROM_PROTECTED] = { 0x0003f000, 4 * KiB, "boot_rom_protected" }, + [FSL_IMX8MM_BOOT_ROM] = { 0x00000000, 252 * KiB, "boot_rom" }, +}; + +static void fsl_imx8mm_init(Object *obj) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + FslImx8mmState *s = FSL_IMX8MM(obj); + const char *cpu_type = ms->cpu_type ?: ARM_CPU_TYPE_NAME("cortex-a53"); + int i; + + for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX8MM_NUM_CPUS); i++) { + g_autofree char *name = g_strdup_printf("cpu%d", i); + object_initialize_child(obj, name, &s->cpu[i], cpu_type); + } + + object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { + g_autofree char *name = g_strdup_printf("uart%d", i + 1); + object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); + } + +} + +static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + FslImx8mmState *s = FSL_IMX8MM(dev); + DeviceState *gicdev = DEVICE(&s->gic); + int i; + + if (ms->smp.cpus > FSL_IMX8MM_NUM_CPUS) { + error_setg(errp, "%s: Only %d CPUs are supported (%d requested)", + TYPE_FSL_IMX8MM, FSL_IMX8MM_NUM_CPUS, ms->smp.cpus); + return; + } + + /* CPUs */ + for (i = 0; i < ms->smp.cpus; i++) { + /* On uniprocessor, the CBAR is set to 0 */ + if (ms->smp.cpus > 1 && + object_property_find(OBJECT(&s->cpu[i]), "reset-cbar")) { + object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar", + fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr, + &error_abort); + } + + /* + * CNTFID0 base frequency in Hz of system counter + */ + object_property_set_int(OBJECT(&s->cpu[i]), "cntfrq", 8000000, + &error_abort); + + if (object_property_find(OBJECT(&s->cpu[i]), "has_el2")) { + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el2", + !kvm_enabled(), &error_abort); + } + + if (object_property_find(OBJECT(&s->cpu[i]), "has_el3")) { + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3", + !kvm_enabled(), &error_abort); + } + + if (i) { + /* + * Secondary CPUs start in powered-down state (and can be + * powered up via the SRC system reset controller) + */ + object_property_set_bool(OBJECT(&s->cpu[i]), "start-powered-off", + true, &error_abort); + } + + if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) { + return; + } + } + + /* GIC */ + { + SysBusDevice *gicsbd = SYS_BUS_DEVICE(&s->gic); + QList *redist_region_count; + bool pmu = object_property_get_bool(OBJECT(first_cpu), "pmu", NULL); + + qdev_prop_set_uint32(gicdev, "num-cpu", ms->smp.cpus); + qdev_prop_set_uint32(gicdev, "num-irq", + FSL_IMX8MM_NUM_IRQS + GIC_INTERNAL); + redist_region_count = qlist_new(); + qlist_append_int(redist_region_count, ms->smp.cpus); + qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count); + object_property_set_link(OBJECT(&s->gic), "sysmem", + OBJECT(get_system_memory()), &error_fatal); + if (!sysbus_realize(gicsbd, errp)) { + return; + } + sysbus_mmio_map(gicsbd, 0, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr); + sysbus_mmio_map(gicsbd, 1, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_REDIST].addr); + + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, and + * the GIC's IRQ/FIQ interrupt outputs to the CPU's inputs. + */ + for (i = 0; i < ms->smp.cpus; i++) { + DeviceState *cpudev = DEVICE(&s->cpu[i]); + int intidbase = FSL_IMX8MM_NUM_IRQS + i * GIC_INTERNAL; + qemu_irq irq; + + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs. + */ + static const int timer_irqs[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, + }; + + for (int j = 0; j < ARRAY_SIZE(timer_irqs); j++) { + irq = qdev_get_gpio_in(gicdev, intidbase + timer_irqs[j]); + qdev_connect_gpio_out(cpudev, j, irq); + } + + irq = qdev_get_gpio_in(gicdev, intidbase + ARCH_GIC_MAINT_IRQ); + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", + 0, irq); + + irq = qdev_get_gpio_in(gicdev, intidbase + VIRTUAL_PMU_IRQ); + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, irq); + + sysbus_connect_irq(gicsbd, i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicsbd, i + ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicsbd, i + 2 * ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicsbd, i + 3 * ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + + if (kvm_enabled()) { + if (pmu) { + assert(arm_feature(&s->cpu[i].env, ARM_FEATURE_PMU)); + if (kvm_irqchip_in_kernel()) { + kvm_arm_pmu_set_irq(&s->cpu[i], VIRTUAL_PMU_IRQ); + } + kvm_arm_pmu_init(&s->cpu[i]); + } + } + } + } + + /* UARTs */ + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } serial_table[FSL_IMX8MM_NUM_UARTS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_UART1].addr, FSL_IMX8MM_UART1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART2].addr, FSL_IMX8MM_UART2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART3].addr, FSL_IMX8MM_UART3_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART4].addr, FSL_IMX8MM_UART4_IRQ }, + }; + + qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i)); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, + qdev_get_gpio_in(gicdev, serial_table[i].irq)); + } + + /* On-Chip RAM */ + if (!memory_region_init_ram(&s->ocram, OBJECT(dev), "imx8mm.ocram", + fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].size, + errp)) { + return; + } + memory_region_add_subregion(get_system_memory(), + fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, + &s->ocram); + + /* Unimplemented devices */ + for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { + switch (i) { + case FSL_IMX8MM_GIC_DIST: + case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_RAM: + case FSL_IMX8MM_OCRAM: + case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + /* device implemented and treated above */ + break; + + default: + create_unimplemented_device(fsl_imx8mm_memmap[i].name, + fsl_imx8mm_memmap[i].addr, + fsl_imx8mm_memmap[i].size); + break; + } + } +} + +static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = fsl_imx8mm_realize; + + dc->desc = "i.MX 8MM SoC"; +} + +static const TypeInfo fsl_imx8mm_types[] = { + { + .name = TYPE_FSL_IMX8MM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(FslImx8mmState), + .instance_init = fsl_imx8mm_init, + .class_init = fsl_imx8mm_class_init, + }, +}; + +DEFINE_TYPES(fsl_imx8mm_types) diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ +/* + * NXP i.MX 8MM Evaluation Kit System Emulation + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "system/address-spaces.h" +#include "hw/arm/boot.h" +#include "hw/arm/fsl-imx8mm.h" +#include "hw/arm/machines-qom.h" +#include "hw/core/boards.h" +#include "hw/core/qdev-properties.h" +#include "system/kvm.h" +#include "system/qtest.h" +#include "qemu/error-report.h" +#include "qapi/error.h" +#include <libfdt.h> + +static void imx8mm_evk_modify_dtb(const struct arm_boot_info *info, void *fdt) +{ + int i, offset; + + /* Temporarily disable following nodes until they are implemented */ + const char *nodes_to_remove[] = { + "nxp,imx8mm-fspi", + "fsl,imx8mm-mipi-csi", + "fsl,imx8mm-mipi-dsim" + }; + + for (i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) { + const char *dev_str = nodes_to_remove[i]; + + offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); + while (offset >= 0) { + fdt_nop_node(fdt, offset); + offset = fdt_node_offset_by_compatible(fdt, offset, dev_str); + } + } + + /* Remove cpu-idle-states property from CPU nodes */ + offset = fdt_node_offset_by_compatible(fdt, -1, "arm,cortex-a53"); + while (offset >= 0) { + fdt_nop_property(fdt, offset, "cpu-idle-states"); + offset = fdt_node_offset_by_compatible(fdt, offset, "arm,cortex-a53"); + } + + if (kvm_enabled()) { + /* Use system counter frequency from host CPU to fix time in guest */ + offset = fdt_node_offset_by_compatible(fdt, -1, "arm,armv8-timer"); + while (offset >= 0) { + fdt_nop_property(fdt, offset, "clock-frequency"); + offset = fdt_node_offset_by_compatible(fdt, offset, "arm,armv8-timer"); + } + } +} + +static void imx8mm_evk_init(MachineState *machine) +{ + static struct arm_boot_info boot_info; + FslImx8mmState *s; + + if (machine->ram_size > FSL_IMX8MM_RAM_SIZE_MAX) { + error_report("RAM size " RAM_ADDR_FMT " above max supported (%08" PRIx64 ")", + machine->ram_size, FSL_IMX8MM_RAM_SIZE_MAX); + exit(1); + } + + boot_info = (struct arm_boot_info) { + .loader_start = FSL_IMX8MM_RAM_START, + .board_id = -1, + .ram_size = machine->ram_size, + .psci_conduit = QEMU_PSCI_CONDUIT_SMC, + .modify_dtb = imx8mm_evk_modify_dtb, + }; + + s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine), + "soc", &error_fatal, NULL)); + sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal); + + memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, + machine->ram); + + if (!qtest_enabled()) { + arm_load_kernel(&s->cpu[0], machine, &boot_info); + } +} + +static const char *imx8mm_evk_get_default_cpu_type(const MachineState *ms) +{ + if (kvm_enabled()) { + return ARM_CPU_TYPE_NAME("host"); + } + + return ARM_CPU_TYPE_NAME("cortex-a53"); +} + +static void imx8mm_evk_machine_init(MachineClass *mc) +{ + mc->desc = "NXP i.MX 8MM EVK Board"; + mc->init = imx8mm_evk_init; + mc->max_cpus = FSL_IMX8MM_NUM_CPUS; + mc->default_cpus = FSL_IMX8MM_NUM_CPUS; + mc->default_ram_size = 2 * GiB; + mc->default_ram_id = "imx8mm-evk.ram"; + mc->get_default_cpu_type = imx8mm_evk_get_default_cpu_type; +} + +DEFINE_MACHINE_AARCH64("imx8mm-evk", imx8mm_evk_machine_init) diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_common_ss.add(when: 'CONFIG_ARMSSE', if_true: files('armsse.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX7', if_true: files('fsl-imx7.c', 'mcimx7d-sabre.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP', if_true: files('fsl-imx8mp.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP_EVK', if_true: files('imx8mp-evk.c')) +arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM', if_true: files('fsl-imx8mm.c')) +arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM_EVK', if_true: files('imx8mm-evk.c')) arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmuv3.c')) arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3_ACCEL', if_true: files('smmuv3-accel.c')) stub_ss.add(files('smmuv3-accel-stubs.c')) diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ +/* + * i.MX 8MM SoC Definitions + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef FSL_IMX8MM_H +#define FSL_IMX8MM_H + +#include "cpu.h" +#include "hw/char/imx_serial.h" +#include "hw/intc/arm_gicv3_common.h" +#include "qom/object.h" +#include "qemu/units.h" + +#define TYPE_FSL_IMX8MM "fsl-imx8mm" +OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) + +#define FSL_IMX8MM_RAM_START 0x40000000 +#define FSL_IMX8MM_RAM_SIZE_MAX (4 * GiB) + +enum FslImx8mmConfiguration { + FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_IRQS = 128, + FSL_IMX8MM_NUM_UARTS = 4, +}; + +struct FslImx8mmState { + SysBusDevice parent_obj; + + ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; + GICv3State gic; + IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; + MemoryRegion ocram; +}; + +enum FslImx8mmMemoryRegions { + FSL_IMX8MM_A53_DAP, + FSL_IMX8MM_AIPS1_CONFIGURATION, + FSL_IMX8MM_AIPS2_CONFIGURATION, + FSL_IMX8MM_AIPS3_CONFIGURATION, + FSL_IMX8MM_AIPS4_CONFIGURATION, + FSL_IMX8MM_ANA_OSC, + FSL_IMX8MM_ANA_PLL, + FSL_IMX8MM_ANA_TSENSOR, + FSL_IMX8MM_APBH_DMA, + FSL_IMX8MM_BOOT_ROM, + FSL_IMX8MM_BOOT_ROM_PROTECTED, + FSL_IMX8MM_CAAM, + FSL_IMX8MM_CAAM_MEM, + FSL_IMX8MM_CCM, + FSL_IMX8MM_CSU, + FSL_IMX8MM_DDR_CTL, + FSL_IMX8MM_DDR_PERF_MON, + FSL_IMX8MM_DDR_PHY, + FSL_IMX8MM_DDR_PHY_BROADCAST, + FSL_IMX8MM_ECSPI1, + FSL_IMX8MM_ECSPI2, + FSL_IMX8MM_ECSPI3, + FSL_IMX8MM_ENET1, + FSL_IMX8MM_GIC_DIST, + FSL_IMX8MM_GIC_REDIST, + FSL_IMX8MM_GPC, + FSL_IMX8MM_GPIO1, + FSL_IMX8MM_GPIO2, + FSL_IMX8MM_GPIO3, + FSL_IMX8MM_GPIO4, + FSL_IMX8MM_GPIO5, + FSL_IMX8MM_GPT1, + FSL_IMX8MM_GPT2, + FSL_IMX8MM_GPT3, + FSL_IMX8MM_GPT4, + FSL_IMX8MM_GPT5, + FSL_IMX8MM_GPT6, + FSL_IMX8MM_GPU2D, + FSL_IMX8MM_I2C1, + FSL_IMX8MM_I2C2, + FSL_IMX8MM_I2C3, + FSL_IMX8MM_I2C4, + FSL_IMX8MM_INTERCONNECT, + FSL_IMX8MM_IOMUXC, + FSL_IMX8MM_IOMUXC_GPR, + FSL_IMX8MM_MEDIA_BLK_CTL, + FSL_IMX8MM_LCDIF, + FSL_IMX8MM_MIPI_CSI, + FSL_IMX8MM_MIPI_DSI, + FSL_IMX8MM_MU_A, + FSL_IMX8MM_MU_B, + FSL_IMX8MM_OCOTP_CTRL, + FSL_IMX8MM_OCRAM, + FSL_IMX8MM_OCRAM_S, + FSL_IMX8MM_PCIE1, + FSL_IMX8MM_PCIE1_MEM, + FSL_IMX8MM_PCIE_PHY1, + FSL_IMX8MM_PERFMON1, + FSL_IMX8MM_PERFMON2, + FSL_IMX8MM_PWM1, + FSL_IMX8MM_PWM2, + FSL_IMX8MM_PWM3, + FSL_IMX8MM_PWM4, + FSL_IMX8MM_QOSC, + FSL_IMX8MM_QSPI, + FSL_IMX8MM_QSPI1_RX_BUFFER, + FSL_IMX8MM_QSPI1_TX_BUFFER, + FSL_IMX8MM_QSPI_MEM, + FSL_IMX8MM_RAM, + FSL_IMX8MM_RDC, + FSL_IMX8MM_SAI1, + FSL_IMX8MM_SAI2, + FSL_IMX8MM_SAI3, + FSL_IMX8MM_SAI5, + FSL_IMX8MM_SAI6, + FSL_IMX8MM_SDMA1, + FSL_IMX8MM_SDMA2, + FSL_IMX8MM_SDMA3, + FSL_IMX8MM_SEMAPHORE1, + FSL_IMX8MM_SEMAPHORE2, + FSL_IMX8MM_SEMAPHORE_HS, + FSL_IMX8MM_SNVS_HP, + FSL_IMX8MM_SPBA1, + FSL_IMX8MM_SRC, + FSL_IMX8MM_SYSCNT_CMP, + FSL_IMX8MM_SYSCNT_CTRL, + FSL_IMX8MM_SYSCNT_RD, + FSL_IMX8MM_TCM_DTCM, + FSL_IMX8MM_TCM_ITCM, + FSL_IMX8MM_TZASC, + FSL_IMX8MM_UART1, + FSL_IMX8MM_UART2, + FSL_IMX8MM_UART3, + FSL_IMX8MM_UART4, + FSL_IMX8MM_USB1, + FSL_IMX8MM_USB2, + FSL_IMX8MM_USB1_OTG, + FSL_IMX8MM_USB2_OTG, + FSL_IMX8MM_USDHC1, + FSL_IMX8MM_USDHC2, + FSL_IMX8MM_USDHC3, + FSL_IMX8MM_VPU, + FSL_IMX8MM_VPU_BLK_CTRL, + FSL_IMX8MM_VPU_G1_DECODER, + FSL_IMX8MM_VPU_G2_DECODER, + FSL_IMX8MM_WDOG1, + FSL_IMX8MM_WDOG2, + FSL_IMX8MM_WDOG3, +}; + +enum FslImx8mmIrqs { + FSL_IMX8MM_UART1_IRQ = 26, + FSL_IMX8MM_UART2_IRQ = 27, + FSL_IMX8MM_UART3_IRQ = 28, + FSL_IMX8MM_UART4_IRQ = 29, +}; + +#endif /* FSL_IMX8MM_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add configurable properties for register reset values that differ between i.MX 8M variants (Plus, Mini, etc.). This allows the same device implementation to be shared across multiple SoCs. Properties added: - arm-pll-fdiv-ctl0-reset: ARM PLL divider control reset value Default value is set to match i.MX 8MP reset value (0x000FA031). This can be overridden in the variant like iMX8MM with its own reset value. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx8mp_analog.c | 12 +++++++++++- include/hw/misc/imx8mp_analog.h | 3 +++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/misc/imx8mp_analog.c b/hw/misc/imx8mp_analog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx8mp_analog.c +++ b/hw/misc/imx8mp_analog.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "hw/misc/imx8mp_analog.h" +#include "hw/core/qdev-properties.h" #include "migration/vmstate.h" #define ANALOG_PLL_LOCK BIT(31) @@ -XXX,XX +XXX,XX @@ static void imx8mp_analog_reset(DeviceState *dev) s->analog[ANALOG_VPU_PLL_LOCKD_CTRL] = 0x0010003f; s->analog[ANALOG_VPU_PLL_MNIT_CTRL] = 0x00280081; s->analog[ANALOG_ARM_PLL_GEN_CTRL] = 0x00000810; - s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = 0x000fa031; + + /* Use property value instead of hardcoded */ + s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = s->arm_pll_fdiv_ctl0_reset; + s->analog[ANALOG_ARM_PLL_LOCKD_CTRL] = 0x0010003f; s->analog[ANALOG_ARM_PLL_MNIT_CTRL] = 0x00280081; s->analog[ANALOG_SYS_PLL1_GEN_CTRL] = 0x0aaaa810; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription imx8mp_analog_vmstate = { }, }; +static const Property imx8mp_analog_properties[] = { + DEFINE_PROP_UINT32("arm-pll-fdiv-ctl0-reset", IMX8MPAnalogState, + arm_pll_fdiv_ctl0_reset, 0x000fa031), /* imx8mp default */ +}; + static void imx8mp_analog_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); device_class_set_legacy_reset(dc, imx8mp_analog_reset); + device_class_set_props(dc, imx8mp_analog_properties); dc->vmsd = &imx8mp_analog_vmstate; dc->desc = "i.MX 8M Plus Analog Module"; } diff --git a/include/hw/misc/imx8mp_analog.h b/include/hw/misc/imx8mp_analog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/imx8mp_analog.h +++ b/include/hw/misc/imx8mp_analog.h @@ -XXX,XX +XXX,XX @@ struct IMX8MPAnalogState { } mmio; uint32_t analog[ANALOG_MAX]; + + /* Property for variant-specific reset values */ + uint32_t arm_pll_fdiv_ctl0_reset; }; #endif /* IMX8MP_ANALOG_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add the Analog IP to i.MX8MM SoC. iMX8MM and i.MX8MP uses the same Analog IP so the analog ip source will be shared. The ARM PLL divider control register (arm-pll-fdiv-ctl0) has a different reset value on i.MX8MM (0x000fa030) compared to i.MX8MP (0x000fa031). So iMX8MM will be overriding this property with its own reset-value. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 12 ++++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 3 files changed, 15 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool select ARM_GIC + select FSL_IMX8MP_ANALOG select IMX config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { g_autofree char *name = g_strdup_printf("uart%d", i + 1); object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } + /* Analog */ + object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset", + 0x000fa030, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->analog), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->analog), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_ANA_PLL].addr); + /* UARTs */ for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { + case FSL_IMX8MM_ANA_PLL: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/misc/imx8mp_analog.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMX8MPAnalogState analog; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; }; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add the Clock Control Module (CCM) device to i.MX8MM SoC. The CCM implementation is shared with i.MX8MP as the register layout is identical between the two variants.Hence iMX8MM will be using the source of iMX8MP CCM. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 10 ++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 3 files changed, 13 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM bool select ARM_GIC select FSL_IMX8MP_ANALOG + select FSL_IMX8MP_CCM select IMX config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX8MP_CCM); + object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } + /* CCM */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->ccm), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_CCM].addr); + /* Analog */ object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset", 0x000fa030, &error_abort); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { case FSL_IMX8MM_ANA_PLL: + case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx8mp_analog.h" +#include "hw/misc/imx8mp_ccm.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> SNVS contains an RTC which allows Linux to deal correctly with time Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 10 ++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 2 files changed, 12 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); + object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { g_autofree char *name = g_strdup_printf("uart%d", i + 1); object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* SNVS */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: case FSL_IMX8MM_OCRAM: + case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: /* device implemented and treated above */ break; diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { GICv3State gic; IMX8MPCCMState ccm; IMX8MPAnalogState analog; + IMX7SNVSState snvs; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; }; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of SD/MMC cards through a virtual SDHCI interface The emulated SDHCI controller allows guest OS to use emulated storage as a standard block device. This will allow running the images such as those generated by Buildroot. Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 25 +++++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 17 +++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 4 files changed, 50 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select SDHCI config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); + object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); + } } static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* USDHCs */ + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usdhc_table[FSL_IMX8MM_NUM_USDHCS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC1].addr, FSL_IMX8MM_USDHC1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC2].addr, FSL_IMX8MM_USDHC2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC3].addr, FSL_IMX8MM_USDHC3_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usdhc[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, usdhc_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0, + qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); + } + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: /* device implemented and treated above */ break; diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx8mm-evk.c +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, machine->ram); + for (int i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + BusState *bus; + DeviceState *carddev; + BlockBackend *blk; + DriveInfo *di = drive_get(IF_SD, i, 0); + + if (!di) { + continue; + } + + blk = blk_by_legacy_dinfo(di); + bus = qdev_get_child_bus(DEVICE(&s->usdhc[i]), "sd-bus"); + carddev = qdev_new(TYPE_SD_CARD); + qdev_prop_set_drive_err(carddev, "drive", blk, &error_fatal); + qdev_realize_and_unref(carddev, bus, &error_fatal); + } + if (!qtest_enabled()) { arm_load_kernel(&s->cpu[0], machine, &boot_info); } diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/sd/sdhci.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, + FSL_IMX8MM_NUM_USDHCS = 3, }; struct FslImx8mmState { @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX7SNVSState snvs; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; + SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmMemoryRegions { }; enum FslImx8mmIrqs { + FSL_IMX8MM_USDHC1_IRQ = 22, + FSL_IMX8MM_USDHC2_IRQ = 23, + FSL_IMX8MM_USDHC3_IRQ = 24, + FSL_IMX8MM_UART1_IRQ = 26, FSL_IMX8MM_UART2_IRQ = 27, FSL_IMX8MM_UART3_IRQ = 28, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> This enables support for Designware PCI Express Controller emulation It provides a controlled environment to debug the linux pci subsystem Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 3 +++ hw/arm/fsl-imx8mm.c | 30 ++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 10 ++++++++++ 3 files changed, 43 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool + imply PCI_DEVICES select ARM_GIC select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX select SDHCI + select PCI_EXPRESS_DESIGNWARE + select PCI_EXPRESS_FSL_IMX8M_PHY config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); + object_initialize_child(obj, "pcie_phy", &s->pcie_phy, + TYPE_FSL_IMX8M_PCIE_PHY); } static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* PCIe */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_PCIE1].addr); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTA_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 1, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTB_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 2, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTC_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTD_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 4, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_MSI_IRQ)); + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_phy), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie_phy), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_PCIE_PHY1].addr); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_PCIE1: + case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/pci-host/designware.h" +#include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; + DesignwarePCIEHost pcie; + FslImx8mPciePhyState pcie_phy; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART2_IRQ = 27, FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + + FSL_IMX8MM_PCI_INTA_IRQ = 122, + FSL_IMX8MM_PCI_INTB_IRQ = 123, + FSL_IMX8MM_PCI_INTC_IRQ = 124, + FSL_IMX8MM_PCI_INTD_IRQ = 125, + FSL_IMX8MM_PCI_MSI_IRQ = 127, }; #endif /* FSL_IMX8MM_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Enabled GPIO controller emulation Also updated the GPIO IRQ lines of iMX8MM Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 54 +++++++++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 14 ++++++++++ 2 files changed, 68 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { + g_autofree char *name = g_strdup_printf("gpio%d", i + 1); + object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); + } + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* GPIOs */ + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { + static const struct { + hwaddr addr; + unsigned int irq_low; + unsigned int irq_high; + } gpio_table[FSL_IMX8MM_NUM_GPIOS] = { + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO1].addr, + FSL_IMX8MM_GPIO1_LOW_IRQ, + FSL_IMX8MM_GPIO1_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO2].addr, + FSL_IMX8MM_GPIO2_LOW_IRQ, + FSL_IMX8MM_GPIO2_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO3].addr, + FSL_IMX8MM_GPIO3_LOW_IRQ, + FSL_IMX8MM_GPIO3_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO4].addr, + FSL_IMX8MM_GPIO4_LOW_IRQ, + FSL_IMX8MM_GPIO4_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO5].addr, + FSL_IMX8MM_GPIO5_LOW_IRQ, + FSL_IMX8MM_GPIO5_HIGH_IRQ + }, + }; + object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true, + &error_abort); + object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq", + true, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, + qdev_get_gpio_in(gicdev, gpio_table[i].irq_low)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, + qdev_get_gpio_in(gicdev, gpio_table[i].irq_high)); + } + /* USDHCs */ for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" +#include "hw/gpio/imx_gpio.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_GPIOS = 5, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMXGPIOState gpio[FSL_IMX8MM_NUM_GPIOS]; IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, + FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, + FSL_IMX8MM_GPIO2_LOW_IRQ = 66, + FSL_IMX8MM_GPIO2_HIGH_IRQ = 67, + FSL_IMX8MM_GPIO3_LOW_IRQ = 68, + FSL_IMX8MM_GPIO3_HIGH_IRQ = 69, + FSL_IMX8MM_GPIO4_LOW_IRQ = 70, + FSL_IMX8MM_GPIO4_HIGH_IRQ = 71, + FSL_IMX8MM_GPIO5_LOW_IRQ = 72, + FSL_IMX8MM_GPIO5_HIGH_IRQ = 73, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> This can be used to test and debug I2C device drivers. Added I2C interrupts Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 2 ++ hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 8 ++++++++ 3 files changed, 37 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool imply PCI_DEVICES + imply I2C_DEVICES select ARM_GIC select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select IMX_I2C select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { + g_autofree char *name = g_strdup_printf("i2c%d", i + 1); + object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); + } + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { g_autofree char *name = g_strdup_printf("gpio%d", i + 1); object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* I2Cs */ + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } i2c_table[FSL_IMX8MM_NUM_I2CS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C1].addr, FSL_IMX8MM_I2C1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C2].addr, FSL_IMX8MM_I2C2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C3].addr, FSL_IMX8MM_I2C3_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C4].addr, FSL_IMX8MM_I2C4_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0, + qdev_get_gpio_in(gicdev, i2c_table[i].irq)); + } + /* GPIOs */ for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/gpio/imx_gpio.h" +#include "hw/i2c/imx_i2c.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_GPIOS = 5, + FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; + IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_I2C1_IRQ = 35, + FSL_IMX8MM_I2C2_IRQ = 36, + FSL_IMX8MM_I2C3_IRQ = 37, + FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, FSL_IMX8MM_GPIO2_LOW_IRQ = 66, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of ECSPI in iMX8MM Added SPI IRQ lines Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 26 ++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 2 files changed, 33 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { + g_autofree char *name = g_strdup_printf("spi%d", i + 1); + object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); + } + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); } + /* ECSPIs */ + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } spi_table[FSL_IMX8MM_NUM_ECSPIS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI1].addr, FSL_IMX8MM_ECSPI1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI2].addr, FSL_IMX8MM_ECSPI2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI3].addr, FSL_IMX8MM_ECSPI3_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, + qdev_get_gpio_in(gicdev, spi_table[i].irq)); + } + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" +#include "hw/ssi/imx_spi.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_ECSPIS = 3, FSL_IMX8MM_NUM_GPIOS = 5, FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; + IMXSPIState spi[FSL_IMX8MM_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_ECSPI1_IRQ = 31, + FSL_IMX8MM_ECSPI2_IRQ = 32, + FSL_IMX8MM_ECSPI3_IRQ = 33, + FSL_IMX8MM_I2C1_IRQ = 35, FSL_IMX8MM_I2C2_IRQ = 36, FSL_IMX8MM_I2C3_IRQ = 37, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of WDT in iMX8MM Added WDT IRQ lines Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 28 ++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 3 files changed, 36 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY + select WDT_IMX2 config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); } + for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) { + g_autofree char *name = g_strdup_printf("wdt%d", i); + object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); + } + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* Watchdogs */ + for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } wdog_table[FSL_IMX8MM_NUM_WDTS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG1].addr, FSL_IMX8MM_WDOG1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG2].addr, FSL_IMX8MM_WDOG2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG3].addr, FSL_IMX8MM_WDOG3_IRQ }, + }; + + object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support", + true, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, wdog_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(gicdev, wdog_table[i].irq)); + } + /* PCIe */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: + case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3: /* device implemented and treated above */ break; diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" +#include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, + FSL_IMX8MM_NUM_WDTS = 3, }; struct FslImx8mmState { @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; + IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; }; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_GPIO5_LOW_IRQ = 72, FSL_IMX8MM_GPIO5_HIGH_IRQ = 73, + FSL_IMX8MM_WDOG1_IRQ = 78, + FSL_IMX8MM_WDOG2_IRQ = 79, + FSL_IMX8MM_WDOG3_IRQ = 10, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of GPT in iMX8MM Added GPT IRQ lines Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 54 +++++++++++++++++++++++++++++++++++++ hw/timer/imx_gpt.c | 26 ++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 11 ++++++++ include/hw/timer/imx_gpt.h | 2 ++ 5 files changed, 94 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_CCM select IMX select IMX_I2C + select OR_IRQ select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) { + g_autofree char *name = g_strdup_printf("gpt%d", i + 1); + object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX8MM_GPT); + } + object_initialize_child(obj, "gpt5-gpt6-irq", &s->gpt5_gpt6_irq, + TYPE_OR_IRQ); + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { g_autofree char *name = g_strdup_printf("i2c%d", i + 1); object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* GPTs */ + object_property_set_int(OBJECT(&s->gpt5_gpt6_irq), "num-lines", 2, + &error_abort); + if (!qdev_realize(DEVICE(&s->gpt5_gpt6_irq), NULL, errp)) { + return; + } + + qdev_connect_gpio_out(DEVICE(&s->gpt5_gpt6_irq), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_GPT5_GPT6_IRQ)); + + for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) { + hwaddr gpt_addrs[FSL_IMX8MM_NUM_GPTS] = { + fsl_imx8mm_memmap[FSL_IMX8MM_GPT1].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT2].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT3].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT4].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT5].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT6].addr, + }; + + s->gpt[i].ccm = IMX_CCM(&s->ccm); + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_addrs[i]); + + if (i < FSL_IMX8MM_NUM_GPTS - 2) { + static const unsigned int gpt_irqs[FSL_IMX8MM_NUM_GPTS - 2] = { + FSL_IMX8MM_GPT1_IRQ, + FSL_IMX8MM_GPT2_IRQ, + FSL_IMX8MM_GPT3_IRQ, + FSL_IMX8MM_GPT4_IRQ, + }; + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(gicdev, gpt_irqs[i])); + } else { + int irq = i - FSL_IMX8MM_NUM_GPTS + 2; + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->gpt5_gpt6_irq), irq)); + } + } + /* I2Cs */ for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6: case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_gpt.c +++ b/hw/timer/imx_gpt.c @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com> * * This code is licensed under GPL version 2 or later. See * the COPYING file in the top-level directory. @@ -XXX,XX +XXX,XX @@ static const IMXClk imx8mp_gpt_clocks[] = { CLK_NONE, /* 111 not defined */ }; +static const IMXClk imx8mm_gpt_clocks[] = { + CLK_NONE, /* 000 No clock source */ + CLK_IPG, /* 001 ipg_clk, 532MHz */ + CLK_IPG_HIGH, /* 010 ipg_clk_highfreq */ + CLK_EXT, /* 011 External clock */ + CLK_32k, /* 100 ipg_clk_32k */ + CLK_HIGH, /* 101 ipg_clk_16M */ + CLK_NONE, /* 110 not defined */ + CLK_NONE, /* 111 not defined */ +}; + /* Must be called from within ptimer_transaction_begin/commit block */ static void imx_gpt_set_freq(IMXGPTState *s) { @@ -XXX,XX +XXX,XX @@ static void imx8mp_gpt_init(Object *obj) s->clocks = imx8mp_gpt_clocks; } +static void imx8mm_gpt_init(Object *obj) +{ + IMXGPTState *s = IMX_GPT(obj); + + s->clocks = imx8mm_gpt_clocks; +} + static const TypeInfo imx25_gpt_info = { .name = TYPE_IMX25_GPT, .parent = TYPE_SYS_BUS_DEVICE, @@ -XXX,XX +XXX,XX @@ static const TypeInfo imx8mp_gpt_info = { .instance_init = imx8mp_gpt_init, }; +static const TypeInfo imx8mm_gpt_info = { + .name = TYPE_IMX8MM_GPT, + .parent = TYPE_IMX25_GPT, + .instance_init = imx8mm_gpt_init, +}; + static void imx_gpt_register_types(void) { type_register_static(&imx25_gpt_info); @@ -XXX,XX +XXX,XX @@ static void imx_gpt_register_types(void) type_register_static(&imx6ul_gpt_info); type_register_static(&imx7_gpt_info); type_register_static(&imx8mp_gpt_info); + type_register_static(&imx8mm_gpt_info); } type_init(imx_gpt_register_types) diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/or-irq.h" #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" +#include "hw/timer/imx_gpt.h" #include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_ECSPIS = 3, FSL_IMX8MM_NUM_GPIOS = 5, + FSL_IMX8MM_NUM_GPTS = 6, FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMXGPTState gpt[FSL_IMX8MM_NUM_GPTS]; IMXGPIOState gpio[FSL_IMX8MM_NUM_GPIOS]; IMX8MPCCMState ccm; IMX8MPAnalogState analog; @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; + OrIRQState gpt5_gpt6_irq; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_I2C3_IRQ = 37, FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_GPT1_IRQ = 55, + FSL_IMX8MM_GPT2_IRQ = 54, + FSL_IMX8MM_GPT3_IRQ = 53, + FSL_IMX8MM_GPT4_IRQ = 52, + FSL_IMX8MM_GPT5_GPT6_IRQ = 51, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, FSL_IMX8MM_GPIO2_LOW_IRQ = 66, diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_gpt.h +++ b/include/hw/timer/imx_gpt.h @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com> * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -XXX,XX +XXX,XX @@ #define TYPE_IMX6UL_GPT "imx6ul.gpt" #define TYPE_IMX7_GPT "imx7.gpt" #define TYPE_IMX8MP_GPT "imx8mp.gpt" +#define TYPE_IMX8MM_GPT "imx8mm.gpt" #define TYPE_IMX_GPT TYPE_IMX25_GPT -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of ENET ethernet controller in iMX8MM Enables testing and debugging of network dependent drivers Added ENET MAC IRQ lines Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 24 ++++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 1 + include/hw/arm/fsl-imx8mm.h | 10 +++++++++- 4 files changed, 35 insertions(+), 1 deletion(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select IMX_FEC select IMX_I2C select OR_IRQ select SDHCI diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); } + object_initialize_child(obj, "eth0", &s->enet, TYPE_IMX_ENET); + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, spi_table[i].irq)); } + /* ENET1 */ + object_property_set_uint(OBJECT(&s->enet), "phy-num", s->phy_num, + &error_abort); + object_property_set_uint(OBJECT(&s->enet), "tx-ring-num", 3, &error_abort); + qemu_configure_nic_device(DEVICE(&s->enet), true, NULL); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->enet), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->enet), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_ENET1].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_ENET1_MAC_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 1, + qdev_get_gpio_in(gicdev, FSL_IMX6_ENET1_MAC_1588_IRQ)); + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6: case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: + case FSL_IMX8MM_ENET1: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } +static const Property fsl_imx8mm_properties[] = { + DEFINE_PROP_UINT32("fec1-phy-num", FslImx8mmState, phy_num, 0), + DEFINE_PROP_BOOL("fec1-phy-connected", FslImx8mmState, phy_connected, true), +}; + static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + device_class_set_props(dc, fsl_imx8mm_properties); dc->realize = fsl_imx8mm_realize; dc->desc = "i.MX 8MM SoC"; diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx8mm-evk.c +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine) s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine), "soc", &error_fatal, NULL)); + object_property_set_uint(OBJECT(s), "fec1-phy-num", 1, &error_fatal); sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" -#include "hw/or-irq.h" +#include "hw/net/imx_fec.h" +#include "hw/core/or-irq.h" #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; + IMXFECState enet; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; OrIRQState gpt5_gpt6_irq; + + uint32_t phy_num; + bool phy_connected; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_WDOG2_IRQ = 79, FSL_IMX8MM_WDOG3_IRQ = 10, + FSL_IMX8MM_ENET1_MAC_IRQ = 118, + FSL_IMX6_ENET1_MAC_1588_IRQ = 121, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of USB on iMX8MM Enables testing and debugging of USB drivers Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 6 ++++++ 3 files changed, 34 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY + select USB_DWC3 select WDT_IMX2 config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) { + g_autofree char *name = g_strdup_printf("usb%d", i); + object_initialize_child(obj, name, &s->usb[i], TYPE_USB_DWC3); + } + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { g_autofree char *name = g_strdup_printf("spi%d", i + 1); object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); } + /* USBs */ + for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usb_table[FSL_IMX8MM_NUM_USBS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_USB1].addr, FSL_IMX8MM_USB1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USB2].addr, FSL_IMX8MM_USB2_IRQ }, + }; + + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p2", 1); + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p3", 1); + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "slots", 2); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 0, + qdev_get_gpio_in(gicdev, usb_table[i].irq)); + } + /* ECSPIs */ for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + case FSL_IMX8MM_USB1 ... FSL_IMX8MM_USB2: case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3: /* device implemented and treated above */ diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" #include "hw/timer/imx_gpt.h" +#include "hw/usb/hcd-dwc3.h" #include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, + FSL_IMX8MM_NUM_USBS = 2, FSL_IMX8MM_NUM_USDHCS = 3, FSL_IMX8MM_NUM_WDTS = 3, }; @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXFECState enet; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; + USBDWC3 usb[FSL_IMX8MM_NUM_USBS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; OrIRQState gpt5_gpt6_irq; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_I2C3_IRQ = 37, FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_USB1_IRQ = 40, + FSL_IMX8MM_USB2_IRQ = 41, + FSL_IMX8MM_GPT1_IRQ = 55, FSL_IMX8MM_GPT2_IRQ = 54, FSL_IMX8MM_GPT3_IRQ = 53, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Added script that would validate the iMX8MM emulation by checking the linux console log. If it succeeds, it will return:- ok 1 test_imx8mm_evk.Imx8mmEvkMachine.test_aarch64_imx8mm_evk_usdhc Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com> [PMM: Add missing blank lines that flake8 wants] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + tests/functional/aarch64/meson.build | 2 + tests/functional/aarch64/test_imx8mm_evk.py | 69 +++++++++++++++++++++ 3 files changed, 72 insertions(+) create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/arm/fsl-imx8mm.c F: hw/arm/imx8mm-evk.c F: include/hw/arm/fsl-imx8mm.h F: docs/system/arm/imx8m.rst +F: tests/functional/aarch64/test_imx8mm_evk.py MCIMX8MP-EVK / i.MX8MP M: Bernhard Beschow <shentey@gmail.com> diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aarch64/meson.build +++ b/tests/functional/aarch64/meson.build @@ -XXX,XX +XXX,XX @@ test_aarch64_timeouts = { 'aspeed_ast2700a2' : 600, 'aspeed_ast2700fc' : 600, 'device_passthrough' : 720, + 'imx8mm_evk' : 240, 'imx8mp_evk' : 240, 'raspi4' : 480, 'reverse_debug' : 180, @@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [ 'aspeed_ast2700fc', 'device_passthrough', 'hotplug_pci', + 'imx8mm_evk', 'imx8mp_evk', 'kvm', 'multiprocess', diff --git a/tests/functional/aarch64/test_imx8mm_evk.py b/tests/functional/aarch64/test_imx8mm_evk.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/aarch64/test_imx8mm_evk.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots a Linux kernel and checks the console +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import LinuxKernelTest, Asset + + +class Imx8mmEvkMachine(LinuxKernelTest): + + ASSET_IMAGE = Asset( + ('https://cloud.debian.org/images/cloud/bookworm/20231210-1590/' + 'debian-12-generic-arm64-20231210-1590.tar.xz'), + '7ebf1577b32d5af6204df74b54ca2e4675de9b5a9fa14f3ff70b88eeb7b3b359') + + KERNEL_OFFSET = 0x51000000 + KERNEL_SIZE = 32622528 + INITRD_OFFSET = 0x76000000 + INITRD_SIZE = 30987766 + DTB_OFFSET = 0x64DB5000 + DTB_SIZE = 36812 + + def extract(self, in_path, out_path, offset, size): + try: + with open(in_path, "rb") as source: + source.seek(offset) + data = source.read(size) + with open(out_path, "wb") as target: + target.write(data) + except (IOError, ValueError) as e: + self.log.error(f"Failed to extract {out_path}: {e}") + raise + + def setUp(self): + super().setUp() + + self.image_path = self.scratch_file("disk.raw") + self.kernel_path = self.scratch_file("linux") + self.initrd_path = self.scratch_file("initrd.zstd") + self.dtb_path = self.scratch_file("imx8mm-evk.dtb") + + self.archive_extract(self.ASSET_IMAGE) + self.extract(self.image_path, self.kernel_path, + self.KERNEL_OFFSET, self.KERNEL_SIZE) + self.extract(self.image_path, self.initrd_path, + self.INITRD_OFFSET, self.INITRD_SIZE) + self.extract(self.image_path, self.dtb_path, + self.DTB_OFFSET, self.DTB_SIZE) + + def test_aarch64_imx8mm_evk_usdhc(self): + self.require_accelerator("tcg") + self.set_machine('imx8mm-evk') + self.vm.set_console(console_index=1) + self.vm.add_args('-m', '2G', + '-smp', '4', + '-kernel', self.kernel_path, + '-initrd', self.initrd_path, + '-dtb', self.dtb_path, + '-append', 'root=/dev/mmcblk2p1', + '-drive', f'file={self.image_path},if=sd,bus=2,' + 'format=raw,id=mmcblk2,snapshot=on') + + self.vm.launch() + self.wait_for_console_pattern('Welcome to ') + + +if __name__ == '__main__': + LinuxKernelTest.main() -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> As mentioned by Richard in [*]: We don't actually need any specific endianness here, because every byte has the same value. So we could simply drop MO_TE. That would produce a store in host-endianness, which will be fractionally more efficient on some hosts. [*] https://lore.kernel.org/qemu-devel/d64d3576-9188-4e74-afdc-3492c9feb8e0@linaro.org/ Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260414005348.4767-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/helper-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ static uint64_t set_step_tags(CPUARMState *env, uint64_t toaddr, * the page dirty and will use the fast path. */ uint64_t repldata = data * 0x0101010101010101ULL; - MemOpIdx oi16 = make_memop_idx(MO_TE | MO_128, memidx); + MemOpIdx oi16 = make_memop_idx(MO_128, memidx); cpu_st16_mmu(env, toaddr, int128_make128(repldata, repldata), oi16, ra); mte_mops_set_tags(env, toaddr, 16, *mtedesc); return 16; -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Extract the implicit MO_TE definition in order to replace it in the next commit. Mechanical change using: $ for n in UW UL UQ UO SW SL SQ; do \ sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \ $(git grep -l MO_TE$n target/arm); \ done Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 6 +-- target/arm/tcg/mve_helper.c | 79 ++++++++++++++++++++----------------- 2 files changed, 45 insertions(+), 40 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) /* Note that these stores can throw exceptions on MPU faults */ ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); cpu_stl_mmu(env, sp, nextinst, oi, GETPC()); cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC()); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); assert(env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) ARMCPU *cpu = env_archcpu(env); uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); /* fptr is the value of Rn, the frame pointer we load the FP regs from */ diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) } DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t) -DO_VLDR(vldrh, MO_TEUW, 2, uint16_t, ldw, 2, uint16_t) -DO_VLDR(vldrw, MO_TEUL, 4, uint32_t, ldl, 4, uint32_t) +DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t) +DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t) DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t) -DO_VSTR(vstrh, MO_TEUW, 2, stw, 2, uint16_t) -DO_VSTR(vstrw, MO_TEUL, 4, stl, 4, uint32_t) +DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t) +DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t) DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t) DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t) DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t) DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t) -DO_VLDR(vldrh_sw, MO_TESW, 2, int16_t, ldw, 4, int32_t) -DO_VLDR(vldrh_uw, MO_TEUW, 2, uint16_t, ldw, 4, uint32_t) +DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t) +DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t) DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t) DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t) -DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) +DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t) #undef DO_VLDR #undef DO_VSTR @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_sw, MO_TESW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4, + int32_t, uint32_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uh, MO_TEUW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uw, MO_TEUW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrw_sg_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2, + uint16_t, uint16_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4, + uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4, + uint32_t, uint32_t, ADDR_ADD, false) DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_os_sw, MO_TESW, int16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uh, MO_TEUW, uint16_t, ldw, 2, +DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uw, MO_TEUW, uint16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrw_sg_os_uw, MO_TEUL, uint32_t, ldl, 4, +DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false) DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false) DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrw_sg_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false) DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_os_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrh_sg_os_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrw_sg_os_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD_OSW, false) +DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false) -DO_VLDR_SG(vldrw_sg_wb_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true) +DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4, + uint32_t, uint32_t, ADDR_ADD, true) DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true) -DO_VSTR_SG(vstrw_sg_wb_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, true) +DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true) DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) /* @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t eci_mask = mve_eci_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ /* \ * R_SXTM allows the dest reg to become UNKNOWN for abandoned \ * beats so we don't care if we update part of the dest and \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t mask = mve_element_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (b = 0, e = 0; b < 16; b += ESIZE, e++) { \ if (mask & (1 << b)) { \ cpu_##STTYPE##_mmu(env, addr, d[H##ESIZE(e)], oi, GETPC()); \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) } DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t) -DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t) -DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t) +DO_VLDR(vldrh, MO_UW, 2, uint16_t, ldw, 2, uint16_t) +DO_VLDR(vldrw, MO_UL, 4, uint32_t, ldl, 4, uint32_t) DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t) -DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t) -DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t) +DO_VSTR(vstrh, MO_UW, 2, stw, 2, uint16_t) +DO_VSTR(vstrw, MO_UL, 4, stl, 4, uint32_t) DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t) DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t) DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t) DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t) -DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t) -DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t) +DO_VLDR(vldrh_sw, MO_SW, 2, int16_t, ldw, 4, int32_t) +DO_VLDR(vldrh_uw, MO_UW, 2, uint16_t, ldw, 4, uint32_t) DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t) DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t) -DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t) +DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) #undef DO_VLDR #undef DO_VSTR -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 43 +++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 23 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4, - int32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2, - uint16_t, uint16_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4, - uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4, - uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrw_sg_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false) DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2, +DO_VLDR_SG(vldrh_sg_os_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4, +DO_VLDR_SG(vldrw_sg_os_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false) DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false) DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrw_sg_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, false) DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) +DO_VSTR_SG(vstrh_sg_os_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrh_sg_os_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrw_sg_os_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false) -DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4, - uint32_t, uint32_t, ADDR_ADD, true) +DO_VLDR_SG(vldrw_sg_wb_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true) DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true) -DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true) +DO_VSTR_SG(vstrw_sg_wb_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, true) DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) /* -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++++ target/arm/tcg/mve_helper.c | 3 ++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" #include "exec/vaddr.h" #include "exec/breakpoint.h" +#include "exec/memop.h" #include "accel/tcg/tb-cpu-state.h" #include "hw/core/registerfields.h" #include "tcg/tcg-gvec-desc.h" @@ -XXX,XX +XXX,XX @@ #define BANK_HYP 6 #define BANK_MON 7 +static inline MemOp mo_endian(CPUARMState *env) +{ + return EX_TBFLAG_ANY(env->hflags, BE_DATA) ? MO_BE : MO_LE; +} + static inline int arm_env_mmu_index(CPUARMState *env) { return EX_TBFLAG_ANY(env->hflags, MMUIDX); diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 47 +++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 17 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t eci_mask = mve_eci_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ /* \ * R_SXTM allows the dest reg to become UNKNOWN for abandoned \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t mask = mve_element_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (b = 0, e = 0; b < 16; b += ESIZE, e++) { \ if (mask & (1 << b)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/meson.build | 3 ++- target/arm/tcg/mve_helper.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c')) arm_ss.add(files( 'cpu32.c', 'm_helper.c', - 'mve_helper.c', )) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( @@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add( 'debug.c', 'hflags.c', 'gengvec.c', + 'mve_helper.c', 'neon_helper.c', 'op_helper.c', 'psci.c', @@ -XXX,XX +XXX,XX @@ arm_user_ss.add( 'debug.c', 'gengvec.c', 'hflags.c', + 'mve_helper.c', 'neon_helper.c', 'op_helper.c', 'tlb_helper.c', diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ #include "helper-mve.h" #include "internals.h" #include "vec_internal.h" -#include "accel/tcg/cpu-ldst.h" +#include "accel/tcg/cpu-ldst-common.h" #include "tcg/tcg.h" #include "fpu/softfloat.h" #include "crypto/clmul.h" -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) /* Note that these stores can throw exceptions on MPU faults */ ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); cpu_stl_mmu(env, sp, nextinst, oi, GETPC()); cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC()); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); assert(env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) ARMCPU *cpu = env_archcpu(env); uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); /* fptr is the value of Rn, the frame pointer we load the FP regs from */ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 2 +- target/arm/tcg/meson.build | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "exec/page-protection.h" #ifdef CONFIG_TCG -#include "accel/tcg/cpu-ldst.h" +#include "accel/tcg/cpu-ldst-common.h" #include "semihosting/common-semi.h" #endif #if !defined(CONFIG_USER_ONLY) diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c')) arm_ss.add(files( 'cpu32.c', - 'm_helper.c', )) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( @@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add( 'debug.c', 'hflags.c', 'gengvec.c', + 'm_helper.c', 'mve_helper.c', 'neon_helper.c', 'op_helper.c', @@ -XXX,XX +XXX,XX @@ arm_user_ss.add( 'debug.c', 'gengvec.c', 'hflags.c', + 'm_helper.c', 'mve_helper.c', 'neon_helper.c', 'op_helper.c', -- 2.43.0 From: Thomas Huth <thuth@redhat.com> When writing to this register, QEMU currently aborts: $ echo "readl 0x10000018" | ./qemu-system-arm -audiodev none,id=snd0 \ -M integratorcp,accel=qtest,audiodev=snd0 -display none -qtest stdio [I 0.000000] OPENED [R +0.001907] readl 0x10000018 qemu: hardware error: integratorcm_read: CM_LMBUSCNT [...] Aborted (core dumped) This is bad, a guest should ideally never be able to kill QEMU like this. Now, according to the "Intergrator/CP User Guide" from: https://developer.arm.com/documentation/dui0159/b/porting-integrator-ap-and-im-pd1/registers "The Integrator/AP CM_LMBUSCNT has been removed." That means this register does not seem to be implemented on real CP boards at all, only for older AP boards. Thus it should be fine if we simply ignore this register in QEMU and handle it like all other unimplemented registers in the "default" handler of the case statement. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3407 Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260420064933.64765-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/integratorcp.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ static uint64_t integratorcm_read(void *opaque, hwaddr offset, } else { return s->cm_lock; } - case 6: /* CM_LMBUSCNT */ - /* ??? High frequency timer. */ - hw_error("integratorcm_read: CM_LMBUSCNT"); case 7: /* CM_AUXOSC */ return s->cm_auxosc; case 8: /* CM_SDRAM */ -- 2.43.0 include/hw/arm/primecell.h used to be more expansive, but now the only thing it defines is the ARM_SYSCTL_GPIO_* constants for the GPIO lines for the arm-sysctl system-control device used on the Realview, Versatile and Versatile Express boards. Replace it with a header file specific to that device. virt.c and vmapple.c included primecell.h despite not using the constants it defined; there we can simply drop the include entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416172627.690396-1-peter.maydell@linaro.org --- MAINTAINERS | 2 +- hw/arm/realview.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 1 - hw/misc/arm_sysctl.c | 2 +- hw/vmapple/vmapple.c | 1 - include/hw/arm/primecell.h | 12 ------------ include/hw/misc/arm_sysctl.h | 16 ++++++++++++++++ 8 files changed, 20 insertions(+), 18 deletions(-) delete mode 100644 include/hw/arm/primecell.h create mode 100644 include/hw/misc/arm_sysctl.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/ssi/pl022.c F: include/hw/ssi/pl022.h F: hw/rtc/pl031.c F: include/hw/rtc/pl031.h -F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ F: hw/*/versatile* F: hw/i2c/arm_sbcon_i2c.c F: include/hw/i2c/arm_sbcon_i2c.h F: hw/misc/arm_sysctl.c +F: include/hw/misc/arm_sysctl.h F: docs/system/arm/versatile.rst Virt diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "target/arm/cpu.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/machines-qom.h" #include "hw/core/split-irq.h" +#include "hw/misc/arm_sysctl.h" #include "hw/net/lan9118.h" #include "hw/net/smc91c111.h" #include "hw/pci/pci.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "qemu/datadir.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/machines-qom.h" +#include "hw/misc/arm_sysctl.h" #include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ #include "monitor/qdev.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/virt.h" #include "hw/arm/machines-qom.h" #include "hw/block/flash.h" diff --git a/hw/misc/arm_sysctl.c b/hw/misc/arm_sysctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/arm_sysctl.c +++ b/hw/misc/arm_sysctl.c @@ -XXX,XX +XXX,XX @@ #include "system/runstate.h" #include "qemu/bitops.h" #include "hw/core/sysbus.h" +#include "hw/misc/arm_sysctl.h" #include "migration/vmstate.h" -#include "hw/arm/primecell.h" #include "qemu/log.h" #include "qemu/module.h" #include "qom/object.h" diff --git a/hw/vmapple/vmapple.c b/hw/vmapple/vmapple.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vmapple/vmapple.c +++ b/hw/vmapple/vmapple.c @@ -XXX,XX +XXX,XX @@ #include "hw/core/sysbus.h" #include "hw/usb/usb.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/char/pl011.h" #include "hw/intc/arm_gic.h" #include "hw/intc/arm_gicv3_common.h" diff --git a/include/hw/arm/primecell.h b/include/hw/arm/primecell.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/arm/primecell.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef PRIMECELL_H -#define PRIMECELL_H - -/* Declarations for ARM PrimeCell based periperals. */ -/* Also includes some devices that are currently only used by the - ARM boards. */ - -/* arm_sysctl GPIO lines */ -#define ARM_SYSCTL_GPIO_MMC_WPROT 0 -#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 - -#endif diff --git a/include/hw/misc/arm_sysctl.h b/include/hw/misc/arm_sysctl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/arm_sysctl.h @@ -XXX,XX +XXX,XX @@ +/* + * Status and system control registers for ARM RealView/Versatile boards. + * + * Copyright (c) Linaro Ltd + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef HW_MISC_ARM_SYSCTL_H +#define HW_MISC_ARM_SYSCTL_H + +/* arm_sysctl inbound GPIO lines */ +#define ARM_SYSCTL_GPIO_MMC_WPROT 0 +#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 + +#endif -- 2.43.0 If we create a normally-AArch64 CPU and configure it with aarch64=off, this will by default leave all the AArch64 ID register values in its ARMISARegisters struct untouched. That in turn means that tests of cpu_isar_feature(aa64_something, cpu) will return true. Until now we have had a design policy that you shouldn't check an aa64_ feature unless you know that the CPU has AArch64; but this is quite fragile as it's easy to forget and only causes a problem in the corner case where AArch64 was turned off. In particular, when we extend the ability to disable AArch64 from only KVM to also TCG there are many more aa64 feature check points which we would otherwise have to audit for whether they needed to be guarded with a check on ARM_FEATURE_AARCH64. Instead, make the CPU realize function zero out all the 64-bit ID registers if a TCG CPU doesn't have AArch64; this will make aa64_ feature tests generally return false. We only do this for TCG because only TCG really needs it, and for KVM it might be confusing to have QEMU's idea of the ID registers be different from KVM's. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260416165353.589569-2-peter.maydell@linaro.org --- target/arm/cpu.c | 35 +++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 3 ++- 2 files changed, 37 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp) } } +static void arm_clear_aarch64_idregs(ARMCPU *cpu) +{ + /* Zero out all the AArch64 ID registers in ARMISARegisters */ + SET_IDREG(&cpu->isar, ID_AA64ISAR0, 0); + SET_IDREG(&cpu->isar, ID_AA64ISAR1, 0); + SET_IDREG(&cpu->isar, ID_AA64ISAR2, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR2, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR2, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR3, 0); + SET_IDREG(&cpu->isar, ID_AA64DFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64DFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64AFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64AFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64ZFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64SMFR0, 0); +} + static void arm_cpu_realizefn(DeviceState *dev, Error **errp) { CPUState *cs = CPU(dev); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } #endif + /* + * A TCG aarch64=off CPU has no AArch64 at all, so we clear out the + * ID registers to avoid cpu_isar_feature(aa64_something, cpu) tests + * incorrectly returning true. We don't do this for other accelerators + * (which in practice means "for KVM", since no others have AArch32 + * guest support) because from KVM's point of view the AArch64 ID + * registers still exist and must have their correct values. So we + * avoid clearing them out so that we don't have QEMU and KVM with + * different ideas of the ID registers. + */ + if (tcg_enabled() && !arm_feature(env, ARM_FEATURE_AARCH64)) { + arm_clear_aarch64_idregs(cpu); + } + #ifdef CONFIG_USER_ONLY /* * User mode relies on IC IVAU instructions to catch modification of diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { * Note that if you add an ID register to the ARMISARegisters struct * you need to also update the 32-bit and 64-bit versions of the * kvm_arm_get_host_cpu_features() function to correctly populate the - * field by reading the value from the KVM vCPU. + * field by reading the value from the KVM vCPU. If it is an AArch64 + * ID register then you also must update arm_clear_aarch64_idregs(). */ struct ARMISARegisters { uint32_t mvfr0; -- 2.43.0 Allow the 'aarch64=off' property, which is currently KVM-only, to be set for TCG CPUs also. Note that we don't permit it on the qemu-aarch64 user-mode binary: this makes no sense as that executable can only handle AArch64 syscalls (and it would also assert at startup since it doesn't compile in the A32-specific GDB xml files like arm-neon.xml). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Clément Chigot <chigot@adacore.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416165353.589569-3-peter.maydell@linaro.org --- docs/system/arm/cpu-features.rst | 10 +++++---- target/arm/cpu-features.h | 5 +++++ target/arm/cpu.c | 36 ++++++++++++++++++++++++++++---- tests/qtest/arm-cpu-features.c | 8 ++----- 4 files changed, 45 insertions(+), 14 deletions(-) diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cpu-features.rst +++ b/docs/system/arm/cpu-features.rst @@ -XXX,XX +XXX,XX @@ not implement ARMv8-A, will not have the ``aarch64`` CPU property. QEMU's support may be limited for some CPU features, only partially supporting the feature or only supporting the feature under certain configurations. For example, the ``aarch64`` CPU feature, which, when -disabled, enables the optional AArch32 CPU feature, is only supported -when using the KVM accelerator and when running on a host CPU type that -supports the feature. While ``aarch64`` currently only works with KVM, -it could work with TCG. CPU features that are specific to KVM are +disabled, enables the optional AArch32 CPU feature, can only be set to +``off`` on the TCG and KVM accelerators, and it cannot be set to +``off`` under KVM unless running on a host CPU type that supports +running guests in AArch32. + +CPU features that are inherently specific to KVM are prefixed with "kvm-" and are described in "KVM VCPU Features". CPU Feature Probing diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-features.h +++ b/target/arm/cpu-features.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_aa32_el2(const ARMISARegisters *id) return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL2) >= 2; } +static inline bool isar_feature_aa64_aa32_el3(const ARMISARegisters *id) +{ + return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL3) >= 2; +} + static inline bool isar_feature_aa64_ras(const ARMISARegisters *id) { return FIELD_EX64_IDREG(id, ID_AA64PFR0, RAS) != 0; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_set_aarch64(Object *obj, bool value, Error **errp) * uniform execution state like do_interrupt. */ if (value == false) { - if (!kvm_enabled() || !kvm_arm_aarch32_supported()) { - error_setg(errp, "'aarch64' feature cannot be disabled " - "unless KVM is enabled and 32-bit EL1 " - "is supported"); + if (kvm_enabled()) { + if (!kvm_arm_aarch32_supported()) { + error_setg(errp, "'aarch64' feature cannot be disabled for KVM " + "because this host does not support 32-bit EL1"); + return; + } + } else if (tcg_enabled()) { +#ifdef CONFIG_USER_ONLY + error_setg(errp, "'aarch64' feature cannot be disabled for " + "usermode emulator qemu-aarch64; use qemu-arm instead"); + return; +#else + bool aa32_at_highest_el; + if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el3, cpu); + } else if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el2, cpu); + } else { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el1, cpu); + } + + if (!aa32_at_highest_el) { + error_setg(errp, "'aarch64' feature cannot be disabled for " + "this TCG CPU because it does not support 32-bit " + "execution at its highest implemented exception " + "level"); + return; + } +#endif + } else { + error_setg(errp, "'aarch64' feature cannot be disabled for " + "this accelerator"); return; } unset_feature(&cpu->env, ARM_FEATURE_AARCH64); diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) sve_tests_default(qts, "max"); pauth_tests_default(qts, "max"); - /* Test that features that depend on KVM generate errors without. */ - assert_error(qts, "max", - "'aarch64' feature cannot be disabled " - "unless KVM is enabled and 32-bit EL1 " - "is supported", - "{ 'aarch64': false }"); + /* TCG allows us to turn off AArch64 on the 'max' CPU type */ + assert_set_feature(qts, "max", "aarch64", false); } qtest_quit(qts); -- 2.43.0 Add a basic test of the TCG 'aarch64=off' functionality; this is the same as our existing arm/test_virt test, but it runs the AArch32 guest kernel on qemu-system-aarch64 with -cpu max,aarch64=off. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416165353.589569-4-peter.maydell@linaro.org --- tests/functional/aarch64/meson.build | 1 + .../aarch64/test_virt_aarch64_off.py | 37 +++++++++++++++++++ 2 files changed, 38 insertions(+) create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aarch64/meson.build +++ b/tests/functional/aarch64/meson.build @@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [ 'tcg_plugins', 'tuxrun', 'virt', + 'virt_aarch64_off', 'virt_gpu', 'virt_vbsa', 'xen', diff --git a/tests/functional/aarch64/test_virt_aarch64_off.py b/tests/functional/aarch64/test_virt_aarch64_off.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/aarch64/test_virt_aarch64_off.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots an AArch32 Linux kernel and checks the console +# on a TCG aarch64 CPU with aarch64=off. This is the same image etc +# as we use in tests/functional/arm/test_virt.py. +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import LinuxKernelTest, Asset + +class ArmVirtMachine(LinuxKernelTest): + + ASSET_KERNEL = Asset( + ('https://archives.fedoraproject.org/pub/archive/fedora/linux/' + 'releases/29/Everything/armhfp/os/images/pxeboot/vmlinuz'), + '18dd5f1a9a28bd539f9d047f7c0677211bae528e8712b40ca5a229a4ad8e2591') + + def test_arm_virt(self): + self.set_machine('virt') + # KVM aarch64=off requires a host CPU that supports it, so + # restrict the test to TCG only + self.require_accelerator('tcg') + self.vm.add_args('-cpu', 'max,aarch64=off') + + kernel_path = self.ASSET_KERNEL.fetch() + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyAMA0') + self.vm.add_args('-kernel', kernel_path, + '-append', kernel_command_line) + self.vm.launch() + console_pattern = 'Kernel command line: %s' % kernel_command_line + self.wait_for_console_pattern(console_pattern) + +if __name__ == '__main__': + LinuxKernelTest.main() -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> We introduce a datatype for a tolerance with respect to a given cpreg migration issue. The tolerance applies to a given cpreg kvm index, and can be of different types: a) mismatch in cpreg indexes - ToleranceNotOnBothEnds (cpreg index is allowed to be only present on one end) - ToleranceOnlySrcTestValue (cpreg index is allowed to be only present in source if its value @mask field matches @value) b) mismatch in cpreg values - ToleranceDiffInMask (value differences are allowed only within a mask) - ToleranceFieldLT (incoming field value must be less than a given value) - ToleranceFieldGT (incoming field value must be greater than a given value) A QLIST of such tolerances can be populated using a new helper: arm_register_cpreg_mig_tolerance() and arm_cpu_match_cpreg_mig_tolerance() allows to check whether a tolerance exists for a given kvm index and its criterion is matched. callers for those helpers will be introduced in subsequent patches. Only registration of migration tolerances related to cpreg index mismatch is currently allowed. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20260420140552.104369-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 82 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 1 + target/arm/internals.h | 54 ++++++++++++++++++++++++++++ 3 files changed, 137 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, QLIST_INSERT_HEAD(&cpu->el_change_hooks, entry, node); } +static ARMCPRegMigTolerance *find_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx) +{ + ARMCPRegMigTolerance *t; + QLIST_FOREACH(t, &cpu->cpreg_mig_tolerances, node) { + if (t->kvmidx == kvmidx) { + return t; + } + } + return NULL; +} + +void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t mask, uint64_t value, + ARMCPRegMigToleranceType type) +{ + ARMCPRegMigTolerance *entry; + + /* make sure the kvmidx has not tolerance already registered */ + assert(!find_mig_tolerance(cpu, kvmidx)); + + assert(type == ToleranceNotOnBothEnds || + type == ToleranceOnlySrcTestValue); + + entry = g_new0(ARMCPRegMigTolerance, 1); + + entry->kvmidx = kvmidx; + entry->mask = mask; + entry->value = value; + entry->type = type; + + QLIST_INSERT_HEAD(&cpu->cpreg_mig_tolerances, entry, node); +} + +bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t vmstate_value, uint64_t local_value, + ARMCPRegMigToleranceType type) +{ + ARMCPRegMigTolerance *t = find_mig_tolerance(cpu, kvmidx); + uint64_t diff, diff_outside_mask, field; + + if (!t || t->type != type) { + return false; + } + + if (type == ToleranceNotOnBothEnds) { + return true; + } + + if (type == ToleranceOnlySrcTestValue && + ((vmstate_value & t->mask) == t->value)) { + return true; + } + + /* Need to check the mask */ + diff = vmstate_value ^ local_value; + diff_outside_mask = diff & ~t->mask; + + if (diff_outside_mask) { + /* there are differences outside of the mask */ + return false; + } + if (type == ToleranceDiffInMask) { + /* differences only in the field, tolerance matched */ + return true; + } + /* need to compare field value against authorized ones */ + field = vmstate_value & t->mask; + if (type == ToleranceFieldLT && (field < t->value)) { + return true; + } + if (type == ToleranceFieldGT && (field > t->value)) { + return true; + } + return false; +} + static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) { /* Reset a single ARMCPRegInfo register */ @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) QLIST_INIT(&cpu->pre_el_change_hooks); QLIST_INIT(&cpu->el_change_hooks); + QLIST_INIT(&cpu->cpreg_mig_tolerances); #ifdef CONFIG_USER_ONLY # ifdef TARGET_AARCH64 @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); ARMELChangeHook *hook, *next; + ARMCPRegMigTolerance *t, *n; g_hash_table_destroy(cpu->cp_regs); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) QLIST_REMOVE(hook, node); g_free(hook); } + QLIST_FOREACH_SAFE(t, &cpu->cpreg_mig_tolerances, node, n) { + QLIST_REMOVE(t, node); + g_free(t); + } #ifndef CONFIG_USER_ONLY if (cpu->pmu_timer) { timer_free(cpu->pmu_timer); diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks; QLIST_HEAD(, ARMELChangeHook) el_change_hooks; + QLIST_HEAD(, ARMCPRegMigTolerance) cpreg_mig_tolerances; int32_t node_id; /* NUMA node this CPU belongs to */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ int compare_u64(const void *a, const void *b); /* Used in FEAT_MEC to set the MECIDWidthm1 field in the MECIDR_EL2 register. */ #define MECID_WIDTH 16 +typedef enum { + ToleranceNotOnBothEnds, + ToleranceOnlySrcTestValue, + ToleranceDiffInMask, + ToleranceFieldLT, + ToleranceFieldGT, +} ARMCPRegMigToleranceType; + +typedef struct ARMCPRegMigTolerance { + uint64_t kvmidx; + uint64_t mask; + uint64_t value; + ARMCPRegMigToleranceType type; + QLIST_ENTRY(ARMCPRegMigTolerance) node; +} ARMCPRegMigTolerance; + +/** + * arm_register_cpreg_mig_tolerance: + * Register a migration tolerance wrt one given cpreg identified by its + * @kvmidx. Calling this function twice for the same @kvmidx is a + * programming error and will cause an assertion failure. + * + * @cpu: vcpu to apply the migration tolerance on + * @kvmidx: kvm index of the cpreg the tolerance applies to + * @mask: bitmask where a difference is tolerated + * (relevant with ToleranceDiffInMask) + * @value: value the bitmask field is compared with + * (relevant with ToleranceFieldLT and ToleranceFieldGT) + * @type: type of the migration tolerance: + * - ToleranceNotOnBothEnds (cpreg index is allowed to be only present + * on one end) + * - ToleranceOnlySrcTestValue (cpreg index is allowed to be only + * present in source if its value @mask field matches @value) + * - ToleranceDiffInMask (mismatch in cpreg values are only tolerated + * if differences are within @mask) + * - ToleranceFieldLT (mismatch in cpreg values are only tolerated + * if incoming @bitmask field value is less than @value) + * - ToleranceFieldGT (mismatch in cpreg values are only tolerated + * if incoming @bitmask field value is greater than @value) + */ +void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t mask, uint64_t value, + ARMCPRegMigToleranceType type); + +/** + * arm_cpu_match_cpreg_mig_tolerance: + * Check whether a tolerance of type @type exists for a given @kvmidx + * and the tolerance criterion is satisfied + */ +bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t vmstate_value, uint64_t local_value, + ARMCPRegMigToleranceType type); + + #endif -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> If there is a mismatch between the cpreg indexes found on both ends, check whether a tolerance was registered for the given kvmidx. If any, silence warning/errors. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 21 +++++++++++++++------ target/arm/trace-events | 2 ++ 2 files changed, 17 insertions(+), 6 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx { g_autofree gchar *name = print_register_name(kvmidx); + if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + 0, 0, ToleranceNotOnBothEnds)) { + trace_tolerate_cpreg_missing_in_incoming_stream(name); + return; + } warn_report("%s: %s " "expected by the destination but not in the incoming stream: " "skip it", __func__, name); } /* - * Handle the situation where @kvmidx is in the incoming stream - * but not on destination. This currently fails the migration but - * we plan to accomodate some exceptions, hence the boolean returned value. + * Handle the situation where @kvmidx is in the incoming + * stream but not on destination. This fails the migration if + * no cpreg mig tolerance is matched for this @kvmidx + * Return true if the migration should eventually fail */ static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx) { g_autofree gchar *name = print_register_name(kvmidx); - bool fail = true; + if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + 0, 0, ToleranceNotOnBothEnds)) { + trace_tolerate_cpreg_only_in_incoming_stream(name); + return false; + } error_report("%s: %s in the incoming stream but unknown on the " "destination: fail migration", __func__, name); - - return fail; + return true; } static int cpu_post_load(void *opaque, int version_id) diff --git a/target/arm/trace-events b/target/arm/trace-events index XXXXXXX..XXXXXXX 100644 --- a/target/arm/trace-events +++ b/target/arm/trace-events @@ -XXX,XX +XXX,XX @@ arm_psci_call(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3, uint32_t cpuid # machine.c cpu_post_load(uint32_t cpreg_vmstate_array_len, uint32_t cpreg_array_len) "cpreg_vmstate_array_len=%d cpreg_array_len=%d" +tolerate_cpreg_missing_in_incoming_stream(char *name) "%s is missing in incoming stream but this is explicitly tolerated" +tolerate_cpreg_only_in_incoming_stream(char *name) "%s is in incoming stream but not on destination but this is explicitly tolerated" -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> Pass the value of the incoming register to handle_cpreg_only_in_incoming_stream and check whether there is a matching ToleranceOnlySrcTestValue tolerance. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20260420140552.104369-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx * no cpreg mig tolerance is matched for this @kvmidx * Return true if the migration should eventually fail */ -static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx) +static bool +handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx, uint64_t value) { g_autofree gchar *name = print_register_name(kvmidx); if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, - 0, 0, ToleranceNotOnBothEnds)) { + 0, 0, ToleranceNotOnBothEnds) || + arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + value, 0, ToleranceOnlySrcTestValue)) { trace_tolerate_cpreg_only_in_incoming_stream(name); return false; } @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } if (cpu->cpreg_vmstate_indexes[v] < cpu->cpreg_indexes[i]) { fail = handle_cpreg_only_in_incoming_stream(cpu, - cpu->cpreg_vmstate_indexes[v++]); + cpu->cpreg_vmstate_indexes[v], + cpu->cpreg_vmstate_values[v]); + v++; continue; } /* matching register, copy the value over */ @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) */ for ( ; v < cpu->cpreg_vmstate_array_len; v++) { fail = handle_cpreg_only_in_incoming_stream(cpu, - cpu->cpreg_vmstate_indexes[v]); + cpu->cpreg_vmstate_indexes[v], + cpu->cpreg_vmstate_values[v]); } if (fail) { return -1; -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> Before linux v6.13 those registers were erroneously unconditionally exposed and this was fixed by commits: - 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace when disabled for guests") - a68cddbe47ef ("KVM: arm64: Hide S1PIE registers from userspace when disabled for guests") in v6.13. This means if we migrate from an old kernel host to a >= 6.13 kernel host, migration currently fails. Declare cpreg migration tolerance for those registers. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-5-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) define_cortex_a72_a57_a53_cp_reginfo(cpu); } +#if defined(CONFIG_KVM) +static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu) +{ + /* + * Registers that may be in the incoming stream and not exposed + * on the destination + */ + + /* + * TCR_EL1 was erroneously unconditionnally exposed before linux v6.13. + * See commit 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace + * when disabled for guests") + */ + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 2, 0, 3), + 0, 0, ToleranceNotOnBothEnds); + /* + * PIRE0_EL1 and PIR_EL1 were erroneously unconditionnally exposed + * before linux v6.13. See commit a68cddbe47ef ("KVM: arm64: Hide + * S1PIE registers from userspace when disabled for guests") + */ + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 2), + 0, 0, ToleranceNotOnBothEnds); + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3), + 0, 0, ToleranceNotOnBothEnds); +} +#endif + static void aarch64_host_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_host_initfn(Object *obj) #endif #if defined(CONFIG_KVM) + kvm_arm_set_cpreg_mig_tolerances(cpu); kvm_arm_set_cpu_features_from_host(cpu); aarch64_add_sve_properties(obj); #elif defined(CONFIG_HVF) -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed from v6.15 onwards. Backward migration from a >= v6.15 to an older kernel would fail without cpreg migration tolerance definition for this register. If the register is present on source but not on destination, its value must be checked to make sure it matches the reset value, ie. 0, meaning no service is exposed to the guest, hence the choice of a ToleranceOnlySrcTestValue migration tolerance. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-6-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu) 0, 0, ToleranceNotOnBothEnds); arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3), 0, 0, ToleranceNotOnBothEnds); + + /* + * KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed + * from v6.15 onwards. Backward migration from a >= v6.15 to an older + * kernel would fail without cpreg migration tolerance definition. + * If the register is present on source but not on destination, make + * sure it has its reset value, ie. 0, meaning no service is exposed + * to the guest. + */ + arm_register_cpreg_mig_tolerance(cpu, KVM_REG_ARM_FW_FEAT_BMAP_REG(3), + UINT64_MAX, 0, ToleranceOnlySrcTestValue); } #endif -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> We want to remove AArch32 DBGDTRTX which was erroneously exposed. This was attempted by 655659a74a36b ("target/arm: Correct encoding of Debug Communications Channel registers") but it was discovered that the removal of this debug register broke forward migration on TCG. Now we have the cpreg migration tolerance infrastructure, we can declare one for the DBGDTRTX. This allow to revert the reinstate patch. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-7-eric.auger@redhat.com [PMM: revised comment, included note about when we can drop the workaround] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .fgt = FGT_CLIDR_EL1, .resetvalue = GET_IDREG(isar, CLIDR) }; + uint64_t dbgtr_el0_kvmidx = + cpreg_to_kvm_id(ENCODE_CP_REG(14, 0, 1, 0, 5, 3, 0)); + define_one_arm_cp_reg(cpu, &clidr); define_arm_cp_regs(cpu, v7_cp_reginfo); define_debug_regs(cpu); + /* + * We used to incorrectly expose a non-existent AArch32 "DBGDTRTX" + * register with this encoding. This has been fixed by commit + * 655659a74a36 ("target/arm: Correct encoding of Debug + * Communications Channel registers") by the introduction of correct + * separate cpreg definitions for AA64 and AA32 versions. However, + * the old cpreg definition couldn't be removed without breaking + * migration, so commit 4f2b82f604 reinstated the bogus encoding + * for migration data only. + * + * Now that we have migration tolerance infrastructure, we can use + * this to allow forward migration from the buggy QEMU versions, + * accepting and ignoring the bogus register if it is in the + * source data. QEMU 11.0 was the last version that sent the + * bogus encoding, so this workaround can be removed at the point + * where we no longer care about migration from that version + * (i.e. when we remove the "virt-11.0" machine type). + */ + arm_register_cpreg_mig_tolerance(cpu, dbgtr_el0_kvmidx, + 0, 0, ToleranceNotOnBothEnds); } else { define_arm_cp_regs(cpu, not_v7_cp_reginfo); } -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> This reverts commit 4f2b82f60431 ("target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat). We don't need that commit anymore as the AArch32 DBGDTRTX register is declared to be safe to ignore in the incoming migration stream. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-8-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static void dbgclaimclr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.dbgclaim &= ~(value & 0xFF); } -static CPAccessResult access_bogus(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) -{ - /* Always UNDEF, as if this cpreg didn't exist */ - return CP_ACCESS_UNDEFINED; -} - static const ARMCPRegInfo debug_cp_reginfo[] = { /* * DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 4, .opc2 = 0, .access = PL0_RW, .accessfn = access_tdcc, .type = ARM_CP_CONST, .resetvalue = 0 }, - /* - * This is not a real AArch32 register. We used to incorrectly expose - * this due to a QEMU bug; to avoid breaking migration compatibility we - * need to continue to provide it so that we don't fail the inbound - * migration when it tells us about a sysreg that we don't have. - * We set an always-fails .accessfn, which means that the guest doesn't - * actually see this register (it will always UNDEF, identically to if - * there were no cpreg definition for it other than that we won't print - * a LOG_UNIMP message about it), and we set the ARM_CP_NO_GDB flag so the - * gdbstub won't see it either. - * (We can't just set .access = 0, because add_cpreg_to_hashtable() - * helpfully ignores cpregs which aren't accessible to the highest - * implemented EL.) - * - * TODO: implement a system for being able to describe "this register - * can be ignored if it appears in the inbound stream"; then we can - * remove this temporary hack. - */ - { .name = "BOGUS_DBGDTR_EL0", .state = ARM_CP_STATE_AA32, - .cp = 14, .opc1 = 3, .crn = 0, .crm = 5, .opc2 = 0, - .access = PL0_RW, .accessfn = access_bogus, - .type = ARM_CP_CONST | ARM_CP_NO_GDB, .resetvalue = 0 }, /* * OSECCR_EL1 provides a mechanism for an operating system * to access the contents of EDECCR. EDECCR is not implemented though, -- 2.43.0 From: Osama Abdelkader <osama.abdelkader@gmail.com> fdt_node_offset_by_compatible(fdt, -1, compat) only finds the first match. If the blob has more than one node with the same compatible string, extra nodes will remain active. Remove all the matching nodes, using the same loop as imx8mp-evk.c does for this purpose. Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com> Message-id: 20260420162114.308519-1-osama.abdelkader@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi4b.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi4b.c +++ b/hw/arm/raspi4b.c @@ -XXX,XX +XXX,XX @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt) for (int i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) { const char *dev_str = nodes_to_remove[i]; + int offset; - int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); - if (offset >= 0) { - if (!fdt_nop_node(fdt, offset)) { - warn_report("bcm2711 dtc: %s has been disabled!", dev_str); + offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); + while (offset >= 0) { + if (fdt_nop_node(fdt, offset) == 0) { + warn_report("bcm2711 dtb: %s has been disabled!", dev_str); } + offset = fdt_node_offset_by_compatible(fdt, offset, dev_str); } } -- 2.43.0 From: Yucai Liu <1486344514@qq.com> Implement a basic i.MX6UL LCDIF controller model with MMIO registers, frame-done interrupt behavior, and framebuffer-backed display updates for RGB565 and XRGB8888 input formats. Place the LCDIF device under hw/display and build it via a dedicated CONFIG_IMX6UL_LCDIF symbol. Model register fields with registerfields.h helpers and provide migration support via vmstate. Signed-off-by: Yucai Liu <1486344514@qq.com> Message-id: 20260412110240.93116-2-yangyanglan718@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 + hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++++++++++++++++++ hw/display/meson.build | 1 + include/hw/display/imx6ul_lcdif.h | 37 +++ 5 files changed, 497 insertions(+) create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/display/imx6ul_lcdif.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/mcimx6ul-evk.c F: hw/arm/fsl-imx6ul.c +F: hw/display/imx6ul_lcdif.c F: hw/misc/imx6ul_ccm.c F: include/hw/arm/fsl-imx6ul.h +F: include/hw/display/imx6ul_lcdif.h F: include/hw/misc/imx6ul_ccm.h F: docs/system/arm/mcimx6ul-evk.rst diff --git a/hw/display/Kconfig b/hw/display/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/display/Kconfig +++ b/hw/display/Kconfig @@ -XXX,XX +XXX,XX @@ config PL110 bool select FRAMEBUFFER +config IMX6UL_LCDIF + bool + select FRAMEBUFFER + config SII9022 bool depends on I2C diff --git a/hw/display/imx6ul_lcdif.c b/hw/display/imx6ul_lcdif.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/display/imx6ul_lcdif.c @@ -XXX,XX +XXX,XX @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * i.MX6UL LCDIF controller + * + * Copyright (c) 2026 Yucai Liu <1486344514@qq.com> + */ + +#include "qemu/osdep.h" +#include "hw/display/imx6ul_lcdif.h" +#include "hw/core/irq.h" +#include "hw/core/registerfields.h" +#include "hw/display/framebuffer.h" +#include "migration/vmstate.h" +#include "system/address-spaces.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "ui/pixel_ops.h" + +#define LCDIF_MMIO_SIZE (16 * KiB) +#define LCDIF_RESET_CTRL1 0x000f0000 + +REG32(CTRL, 0x00) + FIELD(CTRL, RUN, 0, 1) + FIELD(CTRL, WORD_LENGTH, 8, 2) +REG32(CTRL1, 0x10) + FIELD(CTRL1, CUR_FRAME_DONE_IRQ, 9, 1) + FIELD(CTRL1, CUR_FRAME_DONE_IRQ_EN, 13, 1) + FIELD(CTRL1, BYTE_PACKING_FORMAT, 16, 4) +REG32(V4_TRANSFER_COUNT, 0x30) + FIELD(V4_TRANSFER_COUNT, H_COUNT, 0, 16) + FIELD(V4_TRANSFER_COUNT, V_COUNT, 16, 16) +REG32(V4_CUR_BUF, 0x40) +REG32(V4_NEXT_BUF, 0x50) +REG32(AS_NEXT_BUF, 0x230) + +#define REG_SET 0x4 +#define REG_CLR 0x8 +#define REG_TOG 0xc + +#define CTRL_WORD_LENGTH_16 0 +#define CTRL_WORD_LENGTH_24 3 + +#define FRAME_PERIOD_NS (16 * 1000 * 1000ULL) + +enum IMX6ULLCDIFReg { + IMX6UL_LCDIF_REG_CTRL = A_CTRL >> 4, + IMX6UL_LCDIF_REG_CTRL1 = A_CTRL1 >> 4, + IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT = A_V4_TRANSFER_COUNT >> 4, + IMX6UL_LCDIF_REG_V4_CUR_BUF = A_V4_CUR_BUF >> 4, + IMX6UL_LCDIF_REG_V4_NEXT_BUF = A_V4_NEXT_BUF >> 4, + IMX6UL_LCDIF_REG_AS_NEXT_BUF = A_AS_NEXT_BUF >> 4, +}; + +static inline bool imx6ul_lcdif_reg_exists(hwaddr reg) +{ + return (reg >> 4) < IMX6UL_LCDIF_REGS_NUM; +} + +static inline bool imx6ul_lcdif_reg_has_setclr(hwaddr reg) +{ + switch (reg) { + case A_CTRL: + case A_CTRL1: + return true; + default: + return false; + } +} + +static inline bool imx6ul_lcdif_is_running(IMX6ULLCDIFState *s) +{ + uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL]; + + return FIELD_EX32(ctrl, CTRL, RUN); +} + +static inline bool imx6ul_lcdif_frame_done_pending(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + + return FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ); +} + +static void imx6ul_lcdif_schedule_frame(IMX6ULLCDIFState *s) +{ + int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + timer_mod(s->frame_timer, now + FRAME_PERIOD_NS); +} + +static void imx6ul_lcdif_maybe_schedule_frame(IMX6ULLCDIFState *s) +{ + if (imx6ul_lcdif_is_running(s) && !imx6ul_lcdif_frame_done_pending(s)) { + imx6ul_lcdif_schedule_frame(s); + } else { + timer_del(s->frame_timer); + } +} + +static void imx6ul_lcdif_update_irq(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + bool level = FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ_EN) && + FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ); + + qemu_set_irq(s->irq, level); +} + +static void imx6ul_lcdif_frame_done(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + + ctrl1 = FIELD_DP32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ, 1); + s->regs[IMX6UL_LCDIF_REG_CTRL1] = ctrl1; + imx6ul_lcdif_update_irq(s); +} + +static void imx6ul_lcdif_draw_line_rgb565(void *opaque, uint8_t *dst, + const uint8_t *src, int width, + int dststep) +{ + uint32_t *dst32 = (uint32_t *)dst; + int i; + + for (i = 0; i < width; i++) { + uint16_t pixel = lduw_le_p(src); + uint8_t r = ((pixel >> 11) & 0x1f) << 3; + uint8_t g = ((pixel >> 5) & 0x3f) << 2; + uint8_t b = (pixel & 0x1f) << 3; + + *dst32++ = rgb_to_pixel32(r, g, b); + src += 2; + } +} + +static void imx6ul_lcdif_draw_line_xrgb8888(void *opaque, uint8_t *dst, + const uint8_t *src, int width, + int dststep) +{ + uint32_t *dst32 = (uint32_t *)dst; + int i; + + for (i = 0; i < width; i++) { + uint32_t pixel = ldl_le_p(src); + uint8_t r = (pixel >> 16) & 0xff; + uint8_t g = (pixel >> 8) & 0xff; + uint8_t b = pixel & 0xff; + + *dst32++ = rgb_to_pixel32(r, g, b); + src += 4; + } +} + +static void imx6ul_lcdif_update_display(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + DisplaySurface *surface = qemu_console_surface(s->con); + uint32_t transfer_count = s->regs[IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT]; + uint32_t width = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, H_COUNT); + uint32_t height = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, V_COUNT); + uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL]; + uint32_t frame_base = s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF]; + drawfn fn; + int first = 0; + int last = 0; + int src_width; + + if (!imx6ul_lcdif_is_running(s) || width == 0 || height == 0) { + return; + } + + switch (FIELD_EX32(ctrl, CTRL, WORD_LENGTH)) { + case CTRL_WORD_LENGTH_16: + s->src_bpp = 2; + fn = imx6ul_lcdif_draw_line_rgb565; + break; + case CTRL_WORD_LENGTH_24: + s->src_bpp = 4; + fn = imx6ul_lcdif_draw_line_xrgb8888; + break; + default: + return; + } + + if (surface_width(surface) != width || surface_height(surface) != height) { + qemu_console_resize(s->con, width, height); + surface = qemu_console_surface(s->con); + s->invalidate = true; + } + + src_width = width * s->src_bpp; + if (s->invalidate || s->fb_base != frame_base || + s->src_width != src_width || s->rows != height) { + framebuffer_update_memory_section(&s->fbsection, get_system_memory(), + frame_base, height, src_width); + s->fb_base = frame_base; + s->src_width = src_width; + s->rows = height; + } + + framebuffer_update_display(surface, &s->fbsection, width, height, + src_width, surface_stride(surface), 0, + s->invalidate, fn, s, &first, &last); + if (first >= 0) { + dpy_gfx_update(s->con, 0, first, width, last - first + 1); + } + + s->invalidate = false; +} + +static void imx6ul_lcdif_invalidate_display(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + + s->invalidate = true; +} + +static const GraphicHwOps imx6ul_lcdif_graphic_ops = { + .invalidate = imx6ul_lcdif_invalidate_display, + .gfx_update = imx6ul_lcdif_update_display, +}; + +static void imx6ul_lcdif_frame_timer_cb(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + + if (!imx6ul_lcdif_is_running(s) || imx6ul_lcdif_frame_done_pending(s)) { + return; + } + + imx6ul_lcdif_frame_done(s); +} + +static uint64_t imx6ul_lcdif_read(void *opaque, hwaddr offset, unsigned size) +{ + IMX6ULLCDIFState *s = opaque; + hwaddr reg = offset & ~0xf; + uint32_t idx; + + assert(size == 4); + assert(!(offset & 0x3)); + assert(offset < LCDIF_MMIO_SIZE); + + idx = reg >> 4; + if (idx >= ARRAY_SIZE(s->regs)) { + return 0; + } + + return s->regs[idx]; +} + +static void imx6ul_lcdif_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + IMX6ULLCDIFState *s = opaque; + hwaddr reg = offset & ~0xf; + uint32_t idx; + uint32_t oldv; + + assert(size == 4); + assert(!(offset & 0x3)); + assert(offset < LCDIF_MMIO_SIZE); + + if (!imx6ul_lcdif_reg_exists(reg)) { + return; + } + + idx = reg >> 4; + oldv = s->regs[idx]; + + switch (offset & 0xf) { + case 0: + s->regs[idx] = (uint32_t)value; + break; + case REG_SET: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv | (uint32_t)value; + break; + case REG_CLR: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv & ~(uint32_t)value; + break; + case REG_TOG: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv ^ (uint32_t)value; + break; + default: + g_assert_not_reached(); + } + + switch (reg) { + case A_CTRL: + if (!FIELD_EX32(oldv, CTRL, RUN) && + FIELD_EX32(s->regs[idx], CTRL, RUN)) { + s->invalidate = true; + graphic_hw_invalidate(s->con); + imx6ul_lcdif_maybe_schedule_frame(s); + break; + } + if (FIELD_EX32(oldv, CTRL, RUN) && + !FIELD_EX32(s->regs[idx], CTRL, RUN)) { + timer_del(s->frame_timer); + } + break; + case A_CTRL1: + if (FIELD_EX32(oldv, CTRL1, CUR_FRAME_DONE_IRQ) && + !FIELD_EX32(s->regs[idx], CTRL1, CUR_FRAME_DONE_IRQ)) { + imx6ul_lcdif_maybe_schedule_frame(s); + } + break; + case A_V4_TRANSFER_COUNT: + s->invalidate = true; + graphic_hw_invalidate(s->con); + break; + case A_V4_CUR_BUF: + s->invalidate = true; + graphic_hw_invalidate(s->con); + break; + case A_V4_NEXT_BUF: + s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF] = s->regs[idx]; + imx6ul_lcdif_frame_done(s); + s->invalidate = true; + graphic_hw_invalidate(s->con); + imx6ul_lcdif_maybe_schedule_frame(s); + return; + case A_AS_NEXT_BUF: + imx6ul_lcdif_frame_done(s); + imx6ul_lcdif_maybe_schedule_frame(s); + return; + default: + break; + } + + imx6ul_lcdif_update_irq(s); +} + +static const MemoryRegionOps imx6ul_lcdif_ops = { + .read = imx6ul_lcdif_read, + .write = imx6ul_lcdif_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx6ul_lcdif_reset(DeviceState *dev) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + memset(s->regs, 0, sizeof(s->regs)); + s->regs[IMX6UL_LCDIF_REG_CTRL1] = LCDIF_RESET_CTRL1; + s->fb_base = 0; + s->src_width = 0; + s->rows = 0; + s->src_bpp = 0; + s->invalidate = true; + timer_del(s->frame_timer); + imx6ul_lcdif_update_irq(s); +} + +static int imx6ul_lcdif_post_load(void *opaque, int version_id) +{ + IMX6ULLCDIFState *s = opaque; + + s->fb_base = 0; + s->src_width = 0; + s->rows = 0; + s->src_bpp = 0; + s->invalidate = true; + + imx6ul_lcdif_update_irq(s); + if (imx6ul_lcdif_is_running(s) && + !imx6ul_lcdif_frame_done_pending(s) && + !timer_pending(s->frame_timer)) { + imx6ul_lcdif_schedule_frame(s); + } + + return 0; +} + +static const VMStateDescription vmstate_imx6ul_lcdif = { + .name = TYPE_IMX6UL_LCDIF, + .version_id = 1, + .minimum_version_id = 1, + .post_load = imx6ul_lcdif_post_load, + .fields = (const VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMX6ULLCDIFState, IMX6UL_LCDIF_REGS_NUM), + VMSTATE_TIMER_PTR(frame_timer, IMX6ULLCDIFState), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx6ul_lcdif_realize(DeviceState *dev, Error **errp) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, + imx6ul_lcdif_frame_timer_cb, s); + s->invalidate = true; + memory_region_init_io(&s->iomem, OBJECT(dev), &imx6ul_lcdif_ops, s, + TYPE_IMX6UL_LCDIF, LCDIF_MMIO_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); + s->con = graphic_console_init(dev, 0, &imx6ul_lcdif_graphic_ops, s); +} + +static void imx6ul_lcdif_unrealize(DeviceState *dev) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + timer_del(s->frame_timer); + timer_free(s->frame_timer); + s->frame_timer = NULL; + + if (s->con) { + graphic_console_close(s->con); + s->con = NULL; + } +} + +static void imx6ul_lcdif_class_init(ObjectClass *klass, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx6ul_lcdif_realize; + dc->unrealize = imx6ul_lcdif_unrealize; + dc->vmsd = &vmstate_imx6ul_lcdif; + device_class_set_legacy_reset(dc, imx6ul_lcdif_reset); + dc->desc = "i.MX6UL LCDIF"; +} + +static const TypeInfo imx6ul_lcdif_info = { + .name = TYPE_IMX6UL_LCDIF, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX6ULLCDIFState), + .class_init = imx6ul_lcdif_class_init, +}; + +static void imx6ul_lcdif_register_types(void) +{ + type_register_static(&imx6ul_lcdif_info); +} + +type_init(imx6ul_lcdif_register_types) diff --git a/hw/display/meson.build b/hw/display/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/display/meson.build +++ b/hw/display/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: ['CONFIG_VGA_CIRRUS', 'CONFIG_VGA_ISA'], if_true: files('cir system_ss.add(when: 'CONFIG_G364FB', if_true: files('g364fb.c')) system_ss.add(when: 'CONFIG_JAZZ_LED', if_true: files('jazz_led.c')) system_ss.add(when: 'CONFIG_PL110', if_true: files('pl110.c')) +system_ss.add(when: 'CONFIG_IMX6UL_LCDIF', if_true: files('imx6ul_lcdif.c')) system_ss.add(when: 'CONFIG_SII9022', if_true: files('sii9022.c')) system_ss.add(when: 'CONFIG_SSD0303', if_true: files('ssd0303.c')) system_ss.add(when: 'CONFIG_SSD0323', if_true: files('ssd0323.c')) diff --git a/include/hw/display/imx6ul_lcdif.h b/include/hw/display/imx6ul_lcdif.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/imx6ul_lcdif.h @@ -XXX,XX +XXX,XX @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * i.MX6UL LCDIF controller + * + * Copyright (c) 2026 Yucai Liu <1486344514@qq.com> + */ + +#ifndef IMX6UL_LCDIF_H +#define IMX6UL_LCDIF_H + +#include "hw/core/sysbus.h" +#include "qom/object.h" +#include "qemu/timer.h" +#include "ui/console.h" + +#define TYPE_IMX6UL_LCDIF "imx6ul-lcdif" +#define IMX6UL_LCDIF_REGS_NUM ((0x230 >> 4) + 1) +OBJECT_DECLARE_SIMPLE_TYPE(IMX6ULLCDIFState, IMX6UL_LCDIF) + +struct IMX6ULLCDIFState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + MemoryRegionSection fbsection; + qemu_irq irq; + QemuConsole *con; + QEMUTimer *frame_timer; + uint32_t fb_base; + uint32_t src_width; + uint32_t rows; + uint8_t src_bpp; + bool invalidate; + uint32_t regs[IMX6UL_LCDIF_REGS_NUM]; +}; + +#endif /* IMX6UL_LCDIF_H */ -- 2.43.0 From: Yucai Liu <1486344514@qq.com> Instantiate LCDIF as a child object of the i.MX6UL SoC in init and realize it in the SoC realize path before MMIO/IRQ hookup. Also make FSL_IMX6UL select CONFIG_IMX6UL_LCDIF and map the LCDIF region with a 16 KiB size to match the SoC memory map. Signed-off-by: Yucai Liu <1486344514@qq.com> Message-id: 20260412110240.93116-3-yangyanglan718@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx6ul.c | 12 ++++++++++-- include/hw/arm/fsl-imx6ul.h | 4 +++- 3 files changed, 14 insertions(+), 3 deletions(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL imply I2C_DEVICES select A15MPCORE select IMX + select IMX6UL_LCDIF select IMX_FEC select IMX_I2C select IMX_USBPHY diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "hw/arm/fsl-imx6ul.h" +#include "hw/display/imx6ul_lcdif.h" #include "hw/misc/unimp.h" #include "hw/usb/imx-usb-phy.h" #include "hw/core/boards.h" @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); } + /* + * LCDIF + */ + object_initialize_child(obj, "lcdif", &s->lcdif, TYPE_IMX6UL_LCDIF); + /* * SDHCIs */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) /* * LCD */ - create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, - FSL_IMX6UL_LCDIF_SIZE); + sysbus_realize(SYS_BUS_DEVICE(&s->lcdif), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->lcdif), 0, FSL_IMX6UL_LCDIF_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->lcdif), 0, + qdev_get_gpio_in(gic, FSL_IMX6UL_LCDIF_IRQ)); /* * CSU diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/net/imx_fec.h" #include "hw/usb/chipidea.h" #include "hw/usb/imx-usb-phy.h" +#include "hw/display/imx6ul_lcdif.h" #include "system/memory.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { IMX2WdtState wdt[FSL_IMX6UL_NUM_WDTS]; IMXUSBPHYState usbphy[FSL_IMX6UL_NUM_USB_PHYS]; ChipideaState usb[FSL_IMX6UL_NUM_USBS]; + IMX6ULLCDIFState lcdif; MemoryRegion rom; MemoryRegion caam; MemoryRegion ocram; @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULMemoryMap { FSL_IMX6UL_PXP_SIZE = (16 * KiB), FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, - FSL_IMX6UL_LCDIF_SIZE = 0x100, + FSL_IMX6UL_LCDIF_SIZE = (16 * KiB), FSL_IMX6UL_CSI_ADDR = 0x021C4000, FSL_IMX6UL_CSI_SIZE = 0x100, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> We have a registerfields interface which we can use for defining fields alongside helpers to access them. Define the basic syndrome layout and convert the helpers that take the imm16 data directly. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-2-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 75 ++++++++++++++++++++++++++++++++----------- 1 file changed, 57 insertions(+), 18 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ #ifndef TARGET_ARM_SYNDROME_H #define TARGET_ARM_SYNDROME_H -#include "qemu/bitops.h" +#include "hw/core/registerfields.h" /* Valid Syndrome Register EC field values */ enum arm_exception_class { @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { EC_AA64_BKPT = 0x3c, }; +/* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */ +FIELD(SYNDROME, EC, 26, 6) +FIELD(SYNDROME, IL, 25, 1) +FIELD(SYNDROME, ISS, 0, 25) + typedef enum { SME_ET_AccessTrap, SME_ET_Streaming, @@ -XXX,XX +XXX,XX @@ typedef enum { static inline uint32_t syn_get_ec(uint32_t syn) { - return syn >> ARM_EL_EC_SHIFT; + return FIELD_EX32(syn, SYNDROME, EC); } static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec) { - return deposit32(syn, ARM_EL_EC_SHIFT, ARM_EL_EC_LENGTH, ec); + return FIELD_DP32(syn, SYNDROME, EC, ec); } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec) */ static inline uint32_t syn_uncategorized(void) { - return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_UNCATEGORIZED); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } +FIELD(ISS_IMM16, IMM16, 0, 16) + static inline uint32_t syn_aa64_svc(uint32_t imm16) { - return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_SVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_hvc(uint32_t imm16) { - return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_HVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_smc(uint32_t imm16) { - return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_SMC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) { - return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); + uint32_t res = syn_set_ec(0, EC_AA32_SVC); + res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_hvc(uint32_t imm16) { - return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA32_HVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_smc(void) { - return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_AA32_SMC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_aa64_bkpt(uint32_t imm16) { - return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_BKPT); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) { - return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); + uint32_t res = syn_set_ec(0, EC_AA32_BKPT); + res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) static inline uint32_t syn_sve_access_trap(void) { - return (EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_SVEACCESSTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) static inline uint32_t syn_illegalstate(void) { - return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_ILLEGALSTATE); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_pcalignment(void) { - return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_PCALIGNMENT); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn) @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gcs_gcsstr(int ra, int rn) static inline uint32_t syn_serror(uint32_t extra) { - return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra; + uint32_t res = syn_set_ec(0, EC_SERROR); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, SYNDROME, ISS, extra); + return res; } static inline uint32_t syn_mop(bool is_set, bool is_setg, int options, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_aa64_sysregtrap and co-processor register trap syndromes to the registerfields API. The co-processor syndromes are split between single and duel register moves. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-3-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 124 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 102 insertions(+), 22 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { /* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */ FIELD(SYNDROME, EC, 26, 6) -FIELD(SYNDROME, IL, 25, 1) +FIELD(SYNDROME, IL, 25, 1) /* IL=1 for 32 bit instructions */ FIELD(SYNDROME, ISS, 0, 25) typedef enum { @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_smc(uint32_t imm16) static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_AA32_SVC); - res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); return res; } @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_bkpt(uint32_t imm16) static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_AA32_BKPT); - res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); return res; } +/* + * ISS encoding for an exception from MSR, MRS, or System instruction + * in AArch64 state. + */ +FIELD(SYSREG_ISS, ISREAD, 0, 1) /* Direction, 1 is read */ +FIELD(SYSREG_ISS, CRM, 1, 4) +FIELD(SYSREG_ISS, RT, 5, 5) +FIELD(SYSREG_ISS, CRN, 10, 4) +FIELD(SYSREG_ISS, OP1, 14, 3) +FIELD(SYSREG_ISS, OP2, 17, 3) +FIELD(SYSREG_ISS, OP0, 20, 2) + static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, int crn, int crm, int rt, int isread) { - return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL - | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5) - | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_SYSTEMREGISTERTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, SYSREG_ISS, OP0, op0); + res = FIELD_DP32(res, SYSREG_ISS, OP2, op2); + res = FIELD_DP32(res, SYSREG_ISS, OP1, op1); + res = FIELD_DP32(res, SYSREG_ISS, CRN, crn); + res = FIELD_DP32(res, SYSREG_ISS, RT, rt); + res = FIELD_DP32(res, SYSREG_ISS, CRM, crm); + res = FIELD_DP32(res, SYSREG_ISS, ISREAD, isread); + + return res; } +/* + * ISS encoding for an exception from an MCR or MRC access + * (move to/from co-processor) + */ +FIELD(COPROC_ISS, ISREAD, 0, 1) +FIELD(COPROC_ISS, CRM, 1, 4) +FIELD(COPROC_ISS, RT, 5, 5) +FIELD(COPROC_ISS, CRN, 10, 4) +FIELD(COPROC_ISS, OP1, 14, 3) +FIELD(COPROC_ISS, OP2, 17, 3) +FIELD(COPROC_ISS, COND, 20, 4) +FIELD(COPROC_ISS, CV, 24, 1) + static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) { - return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP14RTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP2, opc2); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) { - return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP15RTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP2, opc2); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; } +/* + * ISS encoding for an exception from an MCRR or MRRC access + * (move to/from co-processor with 2 regs) + */ +FIELD(COPROC_R2_ISS, ISREAD, 0, 1) +FIELD(COPROC_R2_ISS, CRM, 1, 4) +FIELD(COPROC_R2_ISS, RT, 5, 5) +FIELD(COPROC_R2_ISS, RT2, 10, 5) +FIELD(COPROC_R2_ISS, OP1, 16, 4) +FIELD(COPROC_R2_ISS, COND, 20, 4) +FIELD(COPROC_R2_ISS, CV, 24, 1) + static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm, int rt, int rt2, int isread, bool is_16bit) { - return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP14RRTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2); + res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, int rt, int rt2, int isread, bool is_16bit) { - return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP15RRTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2); + res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> The syn_simd_access trap was never used so remove it. We should only see the COPROC encoding on v7 architectures. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-4-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, return res; } +/* + * ISS encoding for an exception from an access to a register of + * instruction resulting from the FPEN or TFP traps. + */ +FIELD(FP_ISS, COPROC, 0, 4) /* ARMv7 only */ +FIELD(FP_ISS, COND, 20, 4) +FIELD(FP_ISS, CV, 24, 1) + static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, int coproc) { /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | coproc; -} + uint32_t res = syn_set_ec(0, EC_ADVSIMDFPACCESSTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); -static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) -{ - /* AArch32 SIMD trap: TA == 1 coproc == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (1 << 5); + res = FIELD_DP32(res, FP_ISS, CV, cv); + res = FIELD_DP32(res, FP_ISS, COND, cond); + res = FIELD_DP32(res, FP_ISS, COPROC, coproc); + + return res; } static inline uint32_t syn_sve_access_trap(void) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> For simplicity keep the OP as a two bit field rather than the two interlinked fields in the docs (ERET/ERETA). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-5-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_sve_access_trap(void) } /* + * ISS encoding for an exception from an ERET, ERETAA or ERETAB + * instructions. + * * eret_op is bits [1:0] of the ERET instruction, so: * 0 for ERET, 2 for ERETAA, 3 for ERETAB. */ +FIELD(ERET_ISS, OP, 0, 2) + static inline uint32_t syn_erettrap(int eret_op) { - return (EC_ERETTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | eret_op; + uint32_t res = syn_set_ec(0, EC_ERETTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ERET_ISS, OP, eret_op); + + return res; } static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-6-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_erettrap(int eret_op) return res; } +/* + * ISS encoding for an exception due to SME functionality + */ +FIELD(SME_ISS, SMTC, 0, 2) + static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) { - return (EC_SMETRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) | etype; + uint32_t res = syn_set_ec(0, EC_SMETRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + res = FIELD_DP32(res, SME_ISS, SMTC, etype); + + return res; } static inline uint32_t syn_pacfail(bool data, int keynumber) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> syn_pactrap is fairly simple as the ISS is all RES0. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-7-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) return res; } +/* + * ISS encoding for a PAC Fail exceptions + */ +FIELD(PACFAIL_ISS, BnA, 0, 1) /* B key or A key */ +FIELD(PACFAIL_ISS, DnI, 1, 1) /* Data or Instruction */ + static inline uint32_t syn_pacfail(bool data, int keynumber) { - int error_code = (data << 1) | keynumber; - return (EC_PACFAIL << ARM_EL_EC_SHIFT) | ARM_EL_IL | error_code; + uint32_t res = syn_set_ec(0, EC_PACFAIL); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, PACFAIL_ISS, DnI, data); + res = FIELD_DP32(res, PACFAIL_ISS, BnA, keynumber); + + return res; } +/* + * ISS encoding for an exception from a trapped Pointer + * Authentication instruction is RES0 + */ static inline uint32_t syn_pactrap(void) { - return (EC_PACTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_PACTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_btitrap(int btype) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-8-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pactrap(void) return res; } +/* + * ISS encoding for an exception from a Branch Target Identification + * instruction. + */ +FIELD(BTI_ISS, BTYPE, 0, 2) + static inline uint32_t syn_btitrap(int btype) { - return (EC_BTITRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | btype; + uint32_t res = syn_set_ec(0, EC_BTITRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, BTI_ISS, BTYPE, btype); + return res; } static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This is an Armv7 specific syndrome for chips with Jazelle functionality. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-9-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_btitrap(int btype) return res; } +/* + * ISS encoding for trapped BXJ execution + * + * This is an Armv7 encoding. + */ +FIELD(BXJ_ISS, RM, 0, 4) +/* bits 4:19 are Reserved, UNK/SBZP */ +FIELD(BXJ_ISS, COND, 20, 4) +FIELD(BXJ_ISS, CV, 24, 1) + static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) { - return (EC_BXJTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (cv << 24) | (cond << 20) | rm; + uint32_t res = syn_set_ec(0, EC_BXJTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, BXJ_ISS, CV, cv); + res = FIELD_DP32(res, BXJ_ISS, COND, cond); + res = FIELD_DP32(res, BXJ_ISS, RM, rm); + + return res; } static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-10-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) return res; } +/* + * ISS encoding for a Granule Protection Check exception + * + * These are only reported to EL3 + */ +FIELD(GPC_ISS, xFSC, 0, 6) +FIELD(GPC_ISS, WnR, 6, 1) /* Write not Read */ +FIELD(GPC_ISS, S1PTW, 7, 1) +FIELD(GPC_ISS, CM, 8, 1) +FIELD(GPC_ISS, VNCR, 13, 1) +FIELD(GPC_ISS, GPCSC, 14, 6) +FIELD(GPC_ISS, InD, 20, 1) /* Instruction not Data access */ +FIELD(GPC_ISS, S2PTW, 21, 1) + static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, int cm, int s1ptw, int wnr, int fsc) { - return (EC_GPC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (s2ptw << 21) - | (ind << 20) | (gpcsc << 14) | (vncr << 13) | (cm << 8) - | (s1ptw << 7) | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_GPC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GPC_ISS, S2PTW, s2ptw); + res = FIELD_DP32(res, GPC_ISS, InD, ind); + res = FIELD_DP32(res, GPC_ISS, GPCSC, gpcsc); + res = FIELD_DP32(res, GPC_ISS, VNCR, vncr); + res = FIELD_DP32(res, GPC_ISS, CM, cm); + res = FIELD_DP32(res, GPC_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, GPC_ISS, WnR, wnr); + res = FIELD_DP32(res, GPC_ISS, xFSC, fsc); + + return res; } static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_insn_abort and syn_data_abort_* to the registerfields API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260422125250.1303100-11-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 87 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 74 insertions(+), 13 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, return res; } +/* + * ISS encoding for an exception from an Instruction Abort + * + * (aka instruction abort) + */ +FIELD(IABORT_ISS, IFSC, 0, 6) +FIELD(IABORT_ISS, S1PTW, 7, 1) +FIELD(IABORT_ISS, EA, 9, 1) +FIELD(IABORT_ISS, FnV, 10, 1) /* FAR not Valid */ +FIELD(IABORT_ISS, SET, 11, 2) +FIELD(IABORT_ISS, PFV, 14, 1) +FIELD(IABORT_ISS, TopLevel, 21, 1) /* FEAT_THE */ + static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) { - return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc; + uint32_t res = syn_set_ec(0, EC_INSNABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, IABORT_ISS, EA, ea); + res = FIELD_DP32(res, IABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, IABORT_ISS, IFSC, fsc); + + return res; } +/* + * ISS encoding for an exception from a Data Abort + */ +FIELD(DABORT_ISS, DFSC, 0, 6) +FIELD(DABORT_ISS, WNR, 6, 1) +FIELD(DABORT_ISS, S1PTW, 7, 1) +FIELD(DABORT_ISS, CM, 8, 1) +FIELD(DABORT_ISS, EA, 9, 1) +FIELD(DABORT_ISS, FnV, 10, 1) +FIELD(DABORT_ISS, LST, 11, 2) +FIELD(DABORT_ISS, VNCR, 13, 1) +FIELD(DABORT_ISS, AR, 14, 1) +FIELD(DABORT_ISS, SF, 15, 1) +FIELD(DABORT_ISS, SRT, 16, 5) +FIELD(DABORT_ISS, SSE, 21, 1) +FIELD(DABORT_ISS, SAS, 22, 2) +FIELD(DABORT_ISS, ISV, 24, 1) + static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv, int ea, int cm, int s1ptw, int wnr, int fsc) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7) - | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, DABORT_ISS, FnV, fnv); + res = FIELD_DP32(res, DABORT_ISS, EA, ea); + res = FIELD_DP32(res, DABORT_ISS, CM, cm); + res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } static inline uint32_t syn_data_abort_with_iss(int same_el, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el, int wnr, int fsc, bool is_16bit) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16) - | (sf << 15) | (ar << 14) - | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, DABORT_ISS, ISV, 1); + res = FIELD_DP32(res, DABORT_ISS, SAS, sas); + res = FIELD_DP32(res, DABORT_ISS, SSE, sse); + res = FIELD_DP32(res, DABORT_ISS, SRT, srt); + res = FIELD_DP32(res, DABORT_ISS, SF, sf); + res = FIELD_DP32(res, DABORT_ISS, AR, ar); + res = FIELD_DP32(res, DABORT_ISS, EA, ea); + res = FIELD_DP32(res, DABORT_ISS, CM, cm); + res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el, */ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (1 << ARM_EL_EC_SHIFT) - | ARM_EL_IL | ARM_EL_VNCR | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT_SAME_EL); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, DABORT_ISS, VNCR, 1); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } static inline uint32_t syn_swstep(int same_el, int isv, int ex) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_swstep, syn_watchpoint and syn_breakpoint to the registerfields API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-12-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 54 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 48 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc) return res; } +/* + * ISS encoding for an exception from a Software Step exception. + */ +FIELD(SOFTSTEP_ISS, IFSC, 0, 6) +FIELD(SOFTSTEP_ISS, EX, 6, 1) +FIELD(SOFTSTEP_ISS, ISV, 24, 1) + static inline uint32_t syn_swstep(int same_el, int isv, int ex) { - return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22; + uint32_t res = syn_set_ec(0, EC_SOFTWARESTEP + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, SOFTSTEP_ISS, ISV, isv); + res = FIELD_DP32(res, SOFTSTEP_ISS, EX, ex); + res = FIELD_DP32(res, SOFTSTEP_ISS, IFSC, 0x22); + + return res; } +/* + * ISS encoding for an exception from a Watchpoint exception + */ +FIELD(WATCHPOINT_ISS, DFSC, 0, 6) +FIELD(WATCHPOINT_ISS, WNR, 6, 1) +FIELD(WATCHPOINT_ISS, CM, 8, 1) +FIELD(WATCHPOINT_ISS, FnV, 10, 1) +FIELD(WATCHPOINT_ISS, VNCR, 13, 1) /* FEAT_NV2 */ +FIELD(WATCHPOINT_ISS, FnP, 15, 1) +FIELD(WATCHPOINT_ISS, WPF, 16, 1) +/* bellow mandatory from FEAT_Debugv8p9 */ +FIELD(WATCHPOINT_ISS, WPTV, 17, 1) /* FEAT_Debugv8p2 - WPT valid */ +FIELD(WATCHPOINT_ISS, WPT, 18, 6) /* FEAT_Debugv8p2 - missing WP number */ + static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr) { - return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22; + uint32_t res = syn_set_ec(0, EC_WATCHPOINT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, WATCHPOINT_ISS, CM, cm); + res = FIELD_DP32(res, WATCHPOINT_ISS, WNR, wnr); + res = FIELD_DP32(res, WATCHPOINT_ISS, DFSC, 0x22); + + return res; } +/* + * ISS encoding for an exception from a Breakpoint or a Vector Catch + * debug exception. + */ +FIELD(BREAKPOINT_ISS, IFSC, 0, 6) + static inline uint32_t syn_breakpoint(int same_el) { - return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | 0x22; + uint32_t res = syn_set_ec(0, EC_BREAKPOINT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, BREAKPOINT_ISS, IFSC, 0x22); + + return res; } static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This will help later when we expand the fields we report. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-13-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_breakpoint(int same_el) return res; } +/* + * ISS encoding for an exception from a WF* instruction + */ +FIELD(WFX_ISS, TI, 0, 2) +FIELD(WFX_ISS, RV, 2, 1) +FIELD(WFX_ISS, RN, 5, 5) +FIELD(WFX_ISS, COND, 20, 4) +FIELD(WFX_ISS, CV, 24, 1) + static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) { - return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) | - (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) | - (cv << 24) | (cond << 20) | ti; + uint32_t res = syn_set_ec(0, EC_WFX_TRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, WFX_ISS, CV, cv); + res = FIELD_DP32(res, WFX_ISS, COND, cond); + res = FIELD_DP32(res, WFX_ISS, TI, ti); + + return res; } static inline uint32_t syn_illegalstate(void) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Tweak arg names to make it clear raddr is the data address register number. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-14-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 39 +++++++++++++++++++++++++++++++++------ 1 file changed, 33 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void) return res; } +/* + * ISS encoding for a GCS exception + * + * Field validity depends on EXTYPE + */ +FIELD(GCS_ISS, IT, 0, 5) +FIELD(GCS_ISS, RN, 5, 5) /* only for non EXLOCK exceptions */ +FIELD(GCS_ISS, RADDR, 10, 5) /* only for GCSSTR/GCSSTTR traps */ +FIELD(GCS_ISS, EXTYPE, 20, 4) + static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn) { - return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (GCS_ET_DataCheck << 20) | (rn << 5) | it); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_DataCheck); + res = FIELD_DP32(res, GCS_ISS, RN, rn); + res = FIELD_DP32(res, GCS_ISS, IT, it); + + return res; } static inline uint32_t syn_gcs_exlock(void) { - return (EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | (GCS_ET_EXLOCK << 20); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_EXLOCK); + + return res; } -static inline uint32_t syn_gcs_gcsstr(int ra, int rn) +static inline uint32_t syn_gcs_gcsstr(int raddr, int rn) { - return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (GCS_ET_GCSSTR_GCSSTTR << 20) | (ra << 10) | (rn << 5)); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_GCSSTR_GCSSTTR); + res = FIELD_DP32(res, GCS_ISS, RADDR, raddr); + res = FIELD_DP32(res, GCS_ISS, RN, rn); + + return res; } static inline uint32_t syn_serror(uint32_t extra) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-15-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_serror(uint32_t extra) return res; } +/* + * ISS encoding for an exception from the Memory Copy and Memory Set + * instructions. + */ +FIELD(MOP_ISS, SIZEREG, 0, 5) +FIELD(MOP_ISS, SRCREG, 5, 5) +FIELD(MOP_ISS, DESTREG, 10, 5) +FIELD(MOP_ISS, FORMATOPT, 16, 2) +FIELD(MOP_ISS, OPT_A, 16, 1) +FIELD(MOP_ISS, WRONG_OPT, 17, 1) +FIELD(MOP_ISS, EPILOGUE, 18, 1) +FIELD(MOP_ISS, OPTIONS, 19, 4) +FIELD(MOP_ISS, IS_SETG, 23, 1) +FIELD(MOP_ISS, MEMINST, 24, 1) + static inline uint32_t syn_mop(bool is_set, bool is_setg, int options, bool epilogue, bool wrong_option, bool option_a, int destreg, int srcreg, int sizereg) { - return (EC_MOP << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (is_set << 24) | (is_setg << 23) | (options << 19) | - (epilogue << 18) | (wrong_option << 17) | (option_a << 16) | - (destreg << 10) | (srcreg << 5) | sizereg; + uint32_t res = syn_set_ec(0, EC_MOP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, MOP_ISS, MEMINST, is_set); + res = FIELD_DP32(res, MOP_ISS, IS_SETG, is_setg); + res = FIELD_DP32(res, MOP_ISS, OPTIONS, options); + res = FIELD_DP32(res, MOP_ISS, EPILOGUE, epilogue); + res = FIELD_DP32(res, MOP_ISS, WRONG_OPT, wrong_option); + res = FIELD_DP32(res, MOP_ISS, OPT_A, option_a); + res = FIELD_DP32(res, MOP_ISS, DESTREG, destreg); + res = FIELD_DP32(res, MOP_ISS, SRCREG, srcreg); + res = FIELD_DP32(res, MOP_ISS, SIZEREG, sizereg); + + return res; } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> It shares the same COPROC_ISS encoding as the other CP traps although not all the fields are used. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-16-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 16 ++++++++++++++++ target/arm/tcg/vfp_helper.c | 5 +---- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ FIELD(COPROC_ISS, OP2, 17, 3) FIELD(COPROC_ISS, COND, 20, 4) FIELD(COPROC_ISS, CV, 24, 1) +static inline uint32_t syn_cp10_rt_trap(int cv, int cond, int opc1, + int crn, int rt, int isread) +{ + uint32_t res = syn_set_ec(0, EC_FPIDTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; +} + static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) diff --git a/target/arm/tcg/vfp_helper.c b/target/arm/tcg/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/vfp_helper.c +++ b/target/arm/tcg/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(check_hcr_el2_trap)(CPUARMState *env, uint32_t rt, uint32_t reg) g_assert_not_reached(); } - syndrome = ((EC_FPIDTRAP << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (1 << 24) | (0xe << 20) | (7 << 14) - | (reg << 10) | (rt << 5) | 1); + syndrome = syn_cp10_rt_trap(1, 0xe, 7, reg, rt, 1); raise_exception(env, EXCP_HYP_TRAP, syndrome, 2); } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> One more step towards dropping the old #defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-17-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs) */ if (cs->exception_index == EXCP_PREFETCH_ABORT || (cs->exception_index == EXCP_DATA_ABORT && - !(env->exception.syndrome & ARM_EL_ISV)) || + !FIELD_EX32(env->exception.syndrome, SYNDROME, IL)) || syn_get_ec(env->exception.syndrome) == EC_UNCATEGORIZED) { - env->exception.syndrome &= ~ARM_EL_IL; + env->exception.syndrome = FIELD_DP32(env->exception.syndrome, SYNDROME, IL, 0); } } env->cp15.esr_el[2] = env->exception.syndrome; -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This removes the last use of ARM_EL_EC_SHIFT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-18-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 1 - target/arm/tcg/debug.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ typedef enum { } GCSInstructionType; #define ARM_EL_EC_LENGTH 6 -#define ARM_EL_EC_SHIFT 26 #define ARM_EL_IL_SHIFT 25 #define ARM_EL_ISV_SHIFT 24 #define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) diff --git a/target/arm/tcg/debug.c b/target/arm/tcg/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/debug.c +++ b/target/arm/tcg/debug.c @@ -XXX,XX +XXX,XX @@ raise_exception_debug(CPUARMState *env, uint32_t excp, uint32_t syndrome) * Similarly for watchpoint and breakpoint matches. */ assert(debug_el >= cur_el); - syndrome |= (debug_el == cur_el) << ARM_EL_EC_SHIFT; + syndrome |= (debug_el == cur_el) << R_SYNDROME_EC_SHIFT; raise_exception(env, excp, syndrome, debug_el); } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Rather than open coding a bunch of shifts and masks we can use the syndrome definitions. While we are at it assert it really is a EC_DATAABORT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-19-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/whpx/whpx-all.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/target/arm/whpx/whpx-all.c b/target/arm/whpx/whpx-all.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/whpx/whpx-all.c +++ b/target/arm/whpx/whpx-all.c @@ -XXX,XX +XXX,XX @@ static int whpx_handle_mmio(CPUState *cpu, WHV_MEMORY_ACCESS_CONTEXT *ctx) { uint64_t syndrome = ctx->Syndrome; - bool isv = syndrome & ARM_EL_ISV; - bool iswrite = (syndrome >> 6) & 1; - bool sse = (syndrome >> 21) & 1; - uint32_t sas = (syndrome >> 22) & 3; + bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV); + bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR); + bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE); + uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS); uint32_t len = 1 << sas; - uint32_t srt = (syndrome >> 16) & 0x1f; - uint32_t cm = (syndrome >> 8) & 0x1; + uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT); + uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM); uint64_t val = 0; + assert(syn_get_ec(syndrome) == EC_DATAABORT); assert(!cm); assert(isv); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Rather than open coding a bunch of shifts and masks we can use the syndrome definitions. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260422125250.1303100-20-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/hvf/hvf.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/hvf.c +++ b/target/arm/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ static int hvf_handle_exception(CPUState *cpu, hv_vcpu_exit_exception_t *excp) break; } case EC_DATAABORT: { - bool isv = syndrome & ARM_EL_ISV; - bool iswrite = (syndrome >> 6) & 1; - bool s1ptw = (syndrome >> 7) & 1; - bool sse = (syndrome >> 21) & 1; - uint32_t sas = (syndrome >> 22) & 3; + bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV); + bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR); + bool s1ptw = FIELD_EX32(syndrome, DABORT_ISS, S1PTW); + bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE); + uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS); uint32_t len = 1 << sas; - uint32_t srt = (syndrome >> 16) & 0x1f; - uint32_t cm = (syndrome >> 8) & 0x1; + uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT); + uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM); uint64_t val = 0; uint64_t ipa = excp->physical_address; AddressSpace *as = cpu_get_address_space(cpu, ARMASIdx_NS); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> One more step to removing the old defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-21-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/tlb_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/tlb_helper.c +++ b/target/arm/tcg/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn, */ assert(!fi->stage2); syn = syn_data_abort_vncr(fi->ea, is_write, fsc); - } else if (!(template_syn & ARM_EL_ISV) || target_el != 2 + } else if (!FIELD_EX32(template_syn, DABORT_ISS, ISV) || target_el != 2 || fi->s1ptw || !fi->stage2) { syn = syn_data_abort_no_iss(same_el, 0, fi->ea, 0, fi->s1ptw, is_write, fsc); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> These are only valid for data abort syndromes. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-22-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/tlb_helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/tlb_helper.c +++ b/target/arm/tcg/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn, * ST64BV, or ST64BV0 insns report syndrome info even for stage-1 * faults and regardless of the target EL. */ - if (template_syn & ARM_EL_VNCR) { + if (FIELD_EX32(template_syn, DABORT_ISS, VNCR)) { /* * FEAT_NV2 faults on accesses via VNCR_EL2 are a special case: * they are always reported as "same EL", even though we are going @@ -XXX,XX +XXX,XX @@ void arm_deliver_fault(ARMCPU *cpu, vaddr addr, * because we masked that out in disas_set_insn_syndrome()) */ bool is_vncr = (access_type != MMU_INST_FETCH) && - (env->exception.syndrome & ARM_EL_VNCR); + FIELD_EX32(env->exception.syndrome, DABORT_ISS, VNCR); if (is_vncr) { /* FEAT_NV2 faults on accesses via VNCR_EL2 go to EL2 */ -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Now everything is defined with registerfields we can drop the old defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-23-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 9 --------- 1 file changed, 9 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ typedef enum { GCS_IT_GCSPOPX = 9, } GCSInstructionType; -#define ARM_EL_EC_LENGTH 6 -#define ARM_EL_IL_SHIFT 25 -#define ARM_EL_ISV_SHIFT 24 -#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) -#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT) - -/* In the Data Abort syndrome */ -#define ARM_EL_VNCR (1 << 13) - static inline uint32_t syn_get_ec(uint32_t syn) { return FIELD_EX32(syn, SYNDROME, EC); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Pass the register number (rd) to the wfit helper and report it in the syndrome ISS. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-24-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- target/arm/tcg/helper-defs.h | 2 +- target/arm/tcg/op_helper.c | 7 ++++--- target/arm/tcg/translate-a64.c | 2 +- 4 files changed, 16 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ FIELD(WFX_ISS, RN, 5, 5) FIELD(WFX_ISS, COND, 20, 4) FIELD(WFX_ISS, CV, 24, 1) -static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) +typedef enum { + WFI = 0b00, + WFE = 0b01, + WFIT = 0b10, + WFET = 0xb11 +} wfx_ti; + +static inline uint32_t syn_wfx(int cv, int cond, int rn, bool rv, wfx_ti ti, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_WFX_TRAP); res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) res = FIELD_DP32(res, WFX_ISS, CV, cv); res = FIELD_DP32(res, WFX_ISS, COND, cond); res = FIELD_DP32(res, WFX_ISS, TI, ti); + res = FIELD_DP32(res, WFX_ISS, RN, rn); + res = FIELD_DP32(res, WFX_ISS, RV, rv); return res; } diff --git a/target/arm/tcg/helper-defs.h b/target/arm/tcg/helper-defs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-defs.h +++ b/target/arm/tcg/helper-defs.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(exception_pc_alignment, noreturn, env, vaddr) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) DEF_HELPER_1(wfe, void, env) -DEF_HELPER_2(wfit, void, env, i64) +DEF_HELPER_2(wfit, void, env, i32) DEF_HELPER_1(yield, void, env) DEF_HELPER_1(pre_hvc, void, env) DEF_HELPER_2(pre_smc, void, env, i32) diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) env->regs[15] -= insn_len; } - raise_exception(env, excp, syn_wfx(1, 0xe, 0, insn_len == 2), + raise_exception(env, excp, syn_wfx(1, 0xe, 0, false, WFI, insn_len == 2), target_el); } @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) #endif } -void HELPER(wfit)(CPUARMState *env, uint64_t timeout) +void HELPER(wfit)(CPUARMState *env, uint32_t rd) { #ifdef CONFIG_USER_ONLY /* @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) int target_el = check_wfx_trap(env, false, &excp); /* The WFIT should time out when CNTVCT_EL0 >= the specified value. */ uint64_t cntval = gt_get_countervalue(env); + uint64_t timeout = env->xregs[rd]; /* * We want the value that we would get if we read CNTVCT_EL0 from * the current exception level, so the direct_access offset, not @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) if (target_el) { env->pc -= 4; - raise_exception(env, excp, syn_wfx(1, 0xe, 2, false), target_el); + raise_exception(env, excp, syn_wfx(1, 0xe, rd, true, WFIT, false), target_el); } if (uadd64_overflow(timeout, offset, &nexttick)) { diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_WFIT(DisasContext *s, arg_WFIT *a) } gen_a64_update_pc(s, 4); - gen_helper_wfit(tcg_env, cpu_reg(s, a->rd)); + gen_helper_wfit(tcg_env, tcg_constant_i32(a->rd)); /* Go back to the main loop to check for interrupts */ s->base.is_jmp = DISAS_EXIT; return true; -- 2.43.0