Series comparison

Hopefully last target-arm queue before softfreeze;
this one's largest part is the remainder of the SVE patches,
but there are a selection of other minor things too.

thanks
-- PMM

The following changes since commit 109b25045b3651f9c5d02c3766c0b3ff63e6d193:

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging (2018-06-29 12:30:29 +0100)

are available in the Git repository at:

git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180629

for you to fetch changes up to 802abf4024d23e48d45373ac3f2b580124b54b47:

target/arm: Add ID_ISAR6 (2018-06-29 15:30:54 +0100)

----------------------------------------------------------------
target-arm queue:
 * last of the SVE patches; SVE is now enabled for aarch64 linux-user
 * sd: Don't trace SDRequest crc field (coverity bugfix)
 * target/arm: Mark PMINTENSET accesses as possibly doing IO
 * clean up v7VE feature bit handling
 * i.mx7d: minor cleanups
 * target/arm: support reading of CNT[VCT|FRQ]_EL0 from user-space
 * target/arm: Implement ARMv8.2-DotProd
 * virt: add addresses to dt node names (which stops dtc from
   complaining that they're not correctly named)
 * cleanups: replace error_setg(&error_fatal) by error_report() + exit()

----------------------------------------------------------------
Aaron Lindsay (3):
      target/arm: Add ARM_FEATURE_V7VE for v7 Virtualization Extensions
      target/arm: Remove redundant DIV detection for KVM
      target/arm: Mark PMINTENSET accesses as possibly doing IO

Alex Bennée (1):
      target/arm: support reading of CNT[VCT|FRQ]_EL0 from user-space

Eric Auger (3):
      device_tree: Add qemu_fdt_node_unit_path
      hw/arm/virt: Silence dtc /intc warnings
      hw/arm/virt: Silence dtc /memory warning

Jean-Christophe Dubois (3):
      i.mx7d: Remove unused header files
      i.mx7d: Change SRC unimplemented device name from sdma to src
      i.mx7d: Change IRQ number type from hwaddr to int

Peter Maydell (1):
      sd: Don't trace SDRequest crc field

Philippe Mathieu-Daudé (4):
      hw/block/fdc: Replace error_setg(&error_abort) by assert()
      hw/arm/sysbus-fdt: Replace error_setg(&error_fatal) by error_report() + exit()
      device_tree: Replace error_setg(&error_fatal) by error_report() + exit()
      sdcard: Use the ldst API

Richard Henderson (40):
      target/arm: Implement SVE Memory Contiguous Load Group
      target/arm: Implement SVE Contiguous Load, first-fault and no-fault
      target/arm: Implement SVE Memory Contiguous Store Group
      target/arm: Implement SVE load and broadcast quadword
      target/arm: Implement SVE integer convert to floating-point
      target/arm: Implement SVE floating-point arithmetic (predicated)
      target/arm: Implement SVE FP Multiply-Add Group
      target/arm: Implement SVE Floating Point Accumulating Reduction Group
      target/arm: Implement SVE load and broadcast element
      target/arm: Implement SVE store vector/predicate register
      target/arm: Implement SVE scatter stores
      target/arm: Implement SVE prefetches
      target/arm: Implement SVE gather loads
      target/arm: Implement SVE first-fault gather loads
      target/arm: Implement SVE scatter store vector immediate
      target/arm: Implement SVE floating-point compare vectors
      target/arm: Implement SVE floating-point arithmetic with immediate
      target/arm: Implement SVE Floating Point Multiply Indexed Group
      target/arm: Implement SVE FP Fast Reduction Group
      target/arm: Implement SVE Floating Point Unary Operations - Unpredicated Group
      target/arm: Implement SVE FP Compare with Zero Group
      target/arm: Implement SVE floating-point trig multiply-add coefficient
      target/arm: Implement SVE floating-point convert precision
      target/arm: Implement SVE floating-point convert to integer
      target/arm: Implement SVE floating-point round to integral value
      target/arm: Implement SVE floating-point unary operations
      target/arm: Implement SVE MOVPRFX
      target/arm: Implement SVE floating-point complex add
      target/arm: Implement SVE fp complex multiply add
      target/arm: Pass index to AdvSIMD FCMLA (indexed)
      target/arm: Implement SVE fp complex multiply add (indexed)
      target/arm: Implement SVE dot product (vectors)
      target/arm: Implement SVE dot product (indexed)
      target/arm: Enable SVE for aarch64-linux-user
      target/arm: Implement ARMv8.2-DotProd
      target/arm: Fix SVE signed division vs x86 overflow exception
      target/arm: Fix SVE system register access checks
      target/arm: Prune a57 features from max
      target/arm: Prune a15 features from max
      target/arm: Add ID_ISAR6

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Use assert() instead of error_setg(&error_abort),
as suggested by the "qapi/error.h" documentation:

Please don't error_setg(&error_fatal, ...), use error_report() and
    exit(), because that's more obvious.
    Likewise, don't error_setg(&error_abort, ...), use assert().

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: John Snow <jsnow@redhat.com>
Message-id: 20180625165749.3910-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/block/fdc.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/hw/block/fdc.c b/hw/block/fdc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/block/fdc.c
+++ b/hw/block/fdc.c
@@ -XXX,XX +XXX,XX @@ static int pick_geometry(FDrive *drv)
                            nb_sectors,
                            FloppyDriveType_str(parse->drive));
         }
+        assert(type_match != -1 && "misconfigured fd_format");
         match = type_match;
     }
-
-    /* No match of any kind found -- fd_format is misconfigured, abort. */
-    if (match == -1) {
-        error_setg(&error_abort, "No candidate geometries present in table "
-                   " for floppy drive type '%s'",
-                   FloppyDriveType_str(drv->drive));
-    }
-
     parse = &(fd_formats[match]);
 
  out:
-- 
2.17.1

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Use error_report() + exit() instead of error_setg(&error_fatal),
as suggested by the "qapi/error.h" documentation:

Please don't error_setg(&error_fatal, ...), use error_report() and
   exit(), because that's more obvious.

This fixes CID 1352173:
    "Passing null pointer dt_name to qemu_fdt_node_path, which dereferences it."

And this also fixes:

hw/arm/sysbus-fdt.c:322:9: warning: Array access (from variable 'node_path') results in a null pointer dereference
        if (node_path[1]) {
            ^~~~~~~~~~~~

Fixes: Coverity CID 1352173 (Dereference after null check)
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20180625165749.3910-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/sysbus-fdt.c | 53 +++++++++++++++++++++++++--------------------
 1 file changed, 30 insertions(+), 23 deletions(-)

diff --git a/hw/arm/sysbus-fdt.c b/hw/arm/sysbus-fdt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/sysbus-fdt.c
+++ b/hw/arm/sysbus-fdt.c
@@ -XXX,XX +XXX,XX @@ static void copy_properties_from_host(HostProperty *props, int nb_props,
         r = qemu_fdt_getprop(host_fdt, node_path,
                              props[i].name,
                              &prop_len,
-                             props[i].optional ? &err : &error_fatal);
+                             &err);
         if (r) {
             qemu_fdt_setprop(guest_fdt, nodename,
                              props[i].name, r, prop_len);
         } else {
-            if (prop_len != -FDT_ERR_NOTFOUND) {
-                /* optional property not returned although property exists */
-                error_report_err(err);
-            } else {
+            if (props[i].optional && prop_len == -FDT_ERR_NOTFOUND) {
+                /* optional property does not exist */
                 error_free(err);
+            } else {
+                error_report_err(err);
+            }
+            if (!props[i].optional) {
+                /* mandatory property not found: bail out */
+                exit(1);
             }
         }
     }
@@ -XXX,XX +XXX,XX @@ static void fdt_build_clock_node(void *host_fdt, void *guest_fdt,
 
     node_offset = fdt_node_offset_by_phandle(host_fdt, host_phandle);
     if (node_offset <= 0) {
-        error_setg(&error_fatal,
-                   "not able to locate clock handle %d in host device tree",
-                   host_phandle);
+        error_report("not able to locate clock handle %d in host device tree",
+                     host_phandle);
+        exit(1);
     }
     node_path = g_malloc(path_len);
     while ((ret = fdt_get_path(host_fdt, node_offset, node_path, path_len))
@@ -XXX,XX +XXX,XX @@ static void fdt_build_clock_node(void *host_fdt, void *guest_fdt,
         node_path = g_realloc(node_path, path_len);
     }
     if (ret < 0) {
-        error_setg(&error_fatal,
-                   "not able to retrieve node path for clock handle %d",
-                   host_phandle);
+        error_report("not able to retrieve node path for clock handle %d",
+                     host_phandle);
+        exit(1);
     }
 
     r = qemu_fdt_getprop(host_fdt, node_path, "compatible", &prop_len,
                          &error_fatal);
     if (strcmp(r, "fixed-clock")) {
-        error_setg(&error_fatal,
-                   "clock handle %d is not a fixed clock", host_phandle);
+        error_report("clock handle %d is not a fixed clock", host_phandle);
+        exit(1);
     }
 
     nodename = strrchr(node_path, '/');
@@ -XXX,XX +XXX,XX @@ static int add_amd_xgbe_fdt_node(SysBusDevice *sbdev, void *opaque)
 
     dt_name = sysfs_to_dt_name(vbasedev->name);
     if (!dt_name) {
-        error_setg(&error_fatal, "%s incorrect sysfs device name %s",
-                    __func__, vbasedev->name);
+        error_report("%s incorrect sysfs device name %s",
+                     __func__, vbasedev->name);
+        exit(1);
     }
     node_path = qemu_fdt_node_path(host_fdt, dt_name, vdev->compat,
                                    &error_fatal);
     if (!node_path || !node_path[0]) {
-        error_setg(&error_fatal, "%s unable to retrieve node path for %s/%s",
-                   __func__, dt_name, vdev->compat);
+        error_report("%s unable to retrieve node path for %s/%s",
+                     __func__, dt_name, vdev->compat);
+        exit(1);
     }
 
     if (node_path[1]) {
-        error_setg(&error_fatal, "%s more than one node matching %s/%s!",
-                   __func__, dt_name, vdev->compat);
+        error_report("%s more than one node matching %s/%s!",
+                     __func__, dt_name, vdev->compat);
+        exit(1);
     }
 
     g_free(dt_name);
 
     if (vbasedev->num_regions != 5) {
-        error_setg(&error_fatal, "%s Does the host dt node combine XGBE/PHY?",
-                   __func__);
+        error_report("%s Does the host dt node combine XGBE/PHY?", __func__);
+        exit(1);
     }
 
     /* generate nodes for DMA_CLK and PTP_CLK */
     r = qemu_fdt_getprop(host_fdt, node_path[0], "clocks",
                          &prop_len, &error_fatal);
     if (prop_len != 8) {
-        error_setg(&error_fatal, "%s clocks property should contain 2 handles",
-                   __func__);
+        error_report("%s clocks property should contain 2 handles", __func__);
+        exit(1);
     }
     host_clock_phandles = (uint32_t *)r;
     guest_clock_phandles[0] = qemu_fdt_alloc_phandle(guest_fdt);
-- 
2.17.1

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Use error_report() + exit() instead of error_setg(&error_fatal),
as suggested by the "qapi/error.h" documentation:

Please don't error_setg(&error_fatal, ...), use error_report() and
   exit(), because that's more obvious.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 20180625165749.3910-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 device_tree.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/device_tree.c b/device_tree.c
index XXXXXXX..XXXXXXX 100644
--- a/device_tree.c
+++ b/device_tree.c
@@ -XXX,XX +XXX,XX @@ static void read_fstree(void *fdt, const char *dirname)
     const char *parent_node;
 
     if (strstr(dirname, root_dir) != dirname) {
-        error_setg(&error_fatal, "%s: %s must be searched within %s",
-                   __func__, dirname, root_dir);
+        error_report("%s: %s must be searched within %s",
+                     __func__, dirname, root_dir);
+        exit(1);
     }
     parent_node = &dirname[strlen(SYSFS_DT_BASEDIR)];
 
     d = opendir(dirname);
     if (!d) {
-        error_setg(&error_fatal, "%s cannot open %s", __func__, dirname);
-        return;
+        error_report("%s cannot open %s", __func__, dirname);
+        exit(1);
     }
 
     while ((de = readdir(d)) != NULL) {
@@ -XXX,XX +XXX,XX @@ static void read_fstree(void *fdt, const char *dirname)
         tmpnam = g_strdup_printf("%s/%s", dirname, de->d_name);
 
         if (lstat(tmpnam, &st) < 0) {
-            error_setg(&error_fatal, "%s cannot lstat %s", __func__, tmpnam);
+            error_report("%s cannot lstat %s", __func__, tmpnam);
+            exit(1);
         }
 
         if (S_ISREG(st.st_mode)) {
@@ -XXX,XX +XXX,XX @@ static void read_fstree(void *fdt, const char *dirname)
             gsize len;
 
             if (!g_file_get_contents(tmpnam, &val, &len, NULL)) {
-                error_setg(&error_fatal, "%s not able to extract info from %s",
-                           __func__, tmpnam);
+                error_report("%s not able to extract info from %s",
+                             __func__, tmpnam);
+                exit(1);
             }
 
             if (strlen(parent_node) > 0) {
@@ -XXX,XX +XXX,XX @@ void *load_device_tree_from_sysfs(void)
     host_fdt = create_device_tree(&host_fdt_size);
     read_fstree(host_fdt, SYSFS_DT_BASEDIR);
     if (fdt_check_header(host_fdt)) {
-        error_setg(&error_fatal,
-                   "%s host device tree extracted into memory is invalid",
-                   __func__);
+        error_report("%s host device tree extracted into memory is invalid",
+                     __func__);
+        exit(1);
     }
     return host_fdt;
 }
-- 
2.17.1

From: Eric Auger <eric.auger@redhat.com>

This helper allows to retrieve the paths of nodes whose name
match node-name or node-name@unit-address patterns.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1530044492-24921-2-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/sysemu/device_tree.h | 16 +++++++++++
 device_tree.c                | 55 ++++++++++++++++++++++++++++++++++++
 2 files changed, 71 insertions(+)

diff --git a/include/sysemu/device_tree.h b/include/sysemu/device_tree.h
index XXXXXXX..XXXXXXX 100644
--- a/include/sysemu/device_tree.h
+++ b/include/sysemu/device_tree.h
@@ -XXX,XX +XXX,XX @@ void *load_device_tree_from_sysfs(void);
 char **qemu_fdt_node_path(void *fdt, const char *name, char *compat,
                           Error **errp);
 
+/**
+ * qemu_fdt_node_unit_path: return the paths of nodes matching a given
+ * node-name, ie. node-name and node-name@unit-address
+ * @fdt: pointer to the dt blob
+ * @name: node name
+ * @errp: handle to an error object
+ *
+ * returns a newly allocated NULL-terminated array of node paths.
+ * Use g_strfreev() to free it. If one or more nodes were found, the
+ * array contains the path of each node and the last element equals to
+ * NULL. If there is no error but no matching node was found, the
+ * returned array contains a single element equal to NULL. If an error
+ * was encountered when parsing the blob, the function returns NULL
+ */
+char **qemu_fdt_node_unit_path(void *fdt, const char *name, Error **errp);
+
 int qemu_fdt_setprop(void *fdt, const char *node_path,
                      const char *property, const void *val, int size);
 int qemu_fdt_setprop_cell(void *fdt, const char *node_path,
diff --git a/device_tree.c b/device_tree.c
index XXXXXXX..XXXXXXX 100644
--- a/device_tree.c
+++ b/device_tree.c
@@ -XXX,XX +XXX,XX @@ static int findnode_nofail(void *fdt, const char *node_path)
     return offset;
 }
 
+char **qemu_fdt_node_unit_path(void *fdt, const char *name, Error **errp)
+{
+    char *prefix =  g_strdup_printf("%s@", name);
+    unsigned int path_len = 16, n = 0;
+    GSList *path_list = NULL, *iter;
+    const char *iter_name;
+    int offset, len, ret;
+    char **path_array;
+
+    offset = fdt_next_node(fdt, -1, NULL);
+
+    while (offset >= 0) {
+        iter_name = fdt_get_name(fdt, offset, &len);
+        if (!iter_name) {
+            offset = len;
+            break;
+        }
+        if (!strcmp(iter_name, name) || g_str_has_prefix(iter_name, prefix)) {
+            char *path;
+
+            path = g_malloc(path_len);
+            while ((ret = fdt_get_path(fdt, offset, path, path_len))
+                  == -FDT_ERR_NOSPACE) {
+                path_len += 16;
+                path = g_realloc(path, path_len);
+            }
+            path_list = g_slist_prepend(path_list, path);
+            n++;
+        }
+        offset = fdt_next_node(fdt, offset, NULL);
+    }
+    g_free(prefix);
+
+    if (offset < 0 && offset != -FDT_ERR_NOTFOUND) {
+        error_setg(errp, "%s: abort parsing dt for %s node units: %s",
+                   __func__, name, fdt_strerror(offset));
+        for (iter = path_list; iter; iter = iter->next) {
+            g_free(iter->data);
+        }
+        g_slist_free(path_list);
+        return NULL;
+    }
+
+    path_array = g_new(char *, n + 1);
+    path_array[n--] = NULL;
+
+    for (iter = path_list; iter; iter = iter->next) {
+        path_array[n--] = iter->data;
+    }
+
+    g_slist_free(path_list);
+
+    return path_array;
+}
+
 char **qemu_fdt_node_path(void *fdt, const char *name, char *compat,
                           Error **errp)
 {
-- 
2.17.1

From: Eric Auger <eric.auger@redhat.com>

When running dtc on the guest /proc/device-tree we get the
following warnings: "Warning (unit_address_vs_reg): Node <name>
has a reg or ranges property, but no unit name", with name:
/intc, /intc/its, /intc/v2m.

Nodes should have a name in the form <name>[@<unit-address>] where
unit-address is the primary address used to access the device, listed
in the node's reg property. This fix seems to make dtc happy.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1530044492-24921-3-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/virt.c | 63 +++++++++++++++++++++++++++++++--------------------
 1 file changed, 39 insertions(+), 24 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms)
 
 static void fdt_add_its_gic_node(VirtMachineState *vms)
 {
+    char *nodename;
+
     vms->msi_phandle = qemu_fdt_alloc_phandle(vms->fdt);
-    qemu_fdt_add_subnode(vms->fdt, "/intc/its");
-    qemu_fdt_setprop_string(vms->fdt, "/intc/its", "compatible",
+    nodename = g_strdup_printf("/intc/its@%" PRIx64,
+                               vms->memmap[VIRT_GIC_ITS].base);
+    qemu_fdt_add_subnode(vms->fdt, nodename);
+    qemu_fdt_setprop_string(vms->fdt, nodename, "compatible",
                             "arm,gic-v3-its");
-    qemu_fdt_setprop(vms->fdt, "/intc/its", "msi-controller", NULL, 0);
-    qemu_fdt_setprop_sized_cells(vms->fdt, "/intc/its", "reg",
+    qemu_fdt_setprop(vms->fdt, nodename, "msi-controller", NULL, 0);
+    qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                  2, vms->memmap[VIRT_GIC_ITS].base,
                                  2, vms->memmap[VIRT_GIC_ITS].size);
-    qemu_fdt_setprop_cell(vms->fdt, "/intc/its", "phandle", vms->msi_phandle);
+    qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", vms->msi_phandle);
+    g_free(nodename);
 }
 
 static void fdt_add_v2m_gic_node(VirtMachineState *vms)
 {
+    char *nodename;
+
+    nodename = g_strdup_printf("/intc/v2m@%" PRIx64,
+                               vms->memmap[VIRT_GIC_V2M].base);
     vms->msi_phandle = qemu_fdt_alloc_phandle(vms->fdt);
-    qemu_fdt_add_subnode(vms->fdt, "/intc/v2m");
-    qemu_fdt_setprop_string(vms->fdt, "/intc/v2m", "compatible",
+    qemu_fdt_add_subnode(vms->fdt, nodename);
+    qemu_fdt_setprop_string(vms->fdt, nodename, "compatible",
                             "arm,gic-v2m-frame");
-    qemu_fdt_setprop(vms->fdt, "/intc/v2m", "msi-controller", NULL, 0);
-    qemu_fdt_setprop_sized_cells(vms->fdt, "/intc/v2m", "reg",
+    qemu_fdt_setprop(vms->fdt, nodename, "msi-controller", NULL, 0);
+    qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                  2, vms->memmap[VIRT_GIC_V2M].base,
                                  2, vms->memmap[VIRT_GIC_V2M].size);
-    qemu_fdt_setprop_cell(vms->fdt, "/intc/v2m", "phandle", vms->msi_phandle);
+    qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", vms->msi_phandle);
+    g_free(nodename);
 }
 
 static void fdt_add_gic_node(VirtMachineState *vms)
 {
+    char *nodename;
+
     vms->gic_phandle = qemu_fdt_alloc_phandle(vms->fdt);
     qemu_fdt_setprop_cell(vms->fdt, "/", "interrupt-parent", vms->gic_phandle);
 
-    qemu_fdt_add_subnode(vms->fdt, "/intc");
-    qemu_fdt_setprop_cell(vms->fdt, "/intc", "#interrupt-cells", 3);
-    qemu_fdt_setprop(vms->fdt, "/intc", "interrupt-controller", NULL, 0);
-    qemu_fdt_setprop_cell(vms->fdt, "/intc", "#address-cells", 0x2);
-    qemu_fdt_setprop_cell(vms->fdt, "/intc", "#size-cells", 0x2);
-    qemu_fdt_setprop(vms->fdt, "/intc", "ranges", NULL, 0);
+    nodename = g_strdup_printf("/intc@%" PRIx64,
+                               vms->memmap[VIRT_GIC_DIST].base);
+    qemu_fdt_add_subnode(vms->fdt, nodename);
+    qemu_fdt_setprop_cell(vms->fdt, nodename, "#interrupt-cells", 3);
+    qemu_fdt_setprop(vms->fdt, nodename, "interrupt-controller", NULL, 0);
+    qemu_fdt_setprop_cell(vms->fdt, nodename, "#address-cells", 0x2);
+    qemu_fdt_setprop_cell(vms->fdt, nodename, "#size-cells", 0x2);
+    qemu_fdt_setprop(vms->fdt, nodename, "ranges", NULL, 0);
     if (vms->gic_version == 3) {
         int nb_redist_regions = virt_gicv3_redist_region_count(vms);
 
-        qemu_fdt_setprop_string(vms->fdt, "/intc", "compatible",
+        qemu_fdt_setprop_string(vms->fdt, nodename, "compatible",
                                 "arm,gic-v3");
 
-        qemu_fdt_setprop_cell(vms->fdt, "/intc",
+        qemu_fdt_setprop_cell(vms->fdt, nodename,
                               "#redistributor-regions", nb_redist_regions);
 
         if (nb_redist_regions == 1) {
-            qemu_fdt_setprop_sized_cells(vms->fdt, "/intc", "reg",
+            qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                          2, vms->memmap[VIRT_GIC_DIST].base,
                                          2, vms->memmap[VIRT_GIC_DIST].size,
                                          2, vms->memmap[VIRT_GIC_REDIST].base,
                                          2, vms->memmap[VIRT_GIC_REDIST].size);
         } else {
-            qemu_fdt_setprop_sized_cells(vms->fdt, "/intc", "reg",
+            qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                          2, vms->memmap[VIRT_GIC_DIST].base,
                                          2, vms->memmap[VIRT_GIC_DIST].size,
                                          2, vms->memmap[VIRT_GIC_REDIST].base,
@@ -XXX,XX +XXX,XX @@ static void fdt_add_gic_node(VirtMachineState *vms)
         }
 
         if (vms->virt) {
-            qemu_fdt_setprop_cells(vms->fdt, "/intc", "interrupts",
+            qemu_fdt_setprop_cells(vms->fdt, nodename, "interrupts",
                                    GIC_FDT_IRQ_TYPE_PPI, ARCH_GICV3_MAINT_IRQ,
                                    GIC_FDT_IRQ_FLAGS_LEVEL_HI);
         }
     } else {
         /* 'cortex-a15-gic' means 'GIC v2' */
-        qemu_fdt_setprop_string(vms->fdt, "/intc", "compatible",
+        qemu_fdt_setprop_string(vms->fdt, nodename, "compatible",
                                 "arm,cortex-a15-gic");
-        qemu_fdt_setprop_sized_cells(vms->fdt, "/intc", "reg",
+        qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                       2, vms->memmap[VIRT_GIC_DIST].base,
                                       2, vms->memmap[VIRT_GIC_DIST].size,
                                       2, vms->memmap[VIRT_GIC_CPU].base,
                                       2, vms->memmap[VIRT_GIC_CPU].size);
     }
 
-    qemu_fdt_setprop_cell(vms->fdt, "/intc", "phandle", vms->gic_phandle);
+    qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", vms->gic_phandle);
+    g_free(nodename);
 }
 
 static void fdt_add_pmu_nodes(const VirtMachineState *vms)
-- 
2.17.1

From: Eric Auger <eric.auger@redhat.com>

When running dtc on the guest /proc/device-tree we get the
following warning: Warning (unit_address_vs_reg): Node /memory
has a reg or ranges property, but no unit name".

Let's fix that by adding the unit address to the node name. We also
don't create the /memory node anymore in create_fdt(). We directly
create it in load_dtb. /chosen still needs to be created in create_fdt
as the uart needs it. In case the user provided his own dtb, we nop
all memory nodes found in root and create new one(s).

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1530044492-24921-4-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/boot.c | 41 +++++++++++++++++++++++------------------
 hw/arm/virt.c |  7 +------
 2 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -XXX,XX +XXX,XX @@ int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo,
                  hwaddr addr_limit, AddressSpace *as)
 {
     void *fdt = NULL;
-    int size, rc;
+    int size, rc, n = 0;
     uint32_t acells, scells;
     char *nodename;
     unsigned int i;
     hwaddr mem_base, mem_len;
+    char **node_path;
+    Error *err = NULL;
 
     if (binfo->dtb_filename) {
         char *filename;
@@ -XXX,XX +XXX,XX @@ int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo,
         goto fail;
     }
 
+    /* nop all root nodes matching /memory or /memory@unit-address */
+    node_path = qemu_fdt_node_unit_path(fdt, "memory", &err);
+    if (err) {
+        error_report_err(err);
+        goto fail;
+    }
+    while (node_path[n]) {
+        if (g_str_has_prefix(node_path[n], "/memory")) {
+            qemu_fdt_nop_node(fdt, node_path[n]);
+        }
+        n++;
+    }
+    g_strfreev(node_path);
+
     if (nb_numa_nodes > 0) {
-        /*
-         * Turn the /memory node created before into a NOP node, then create
-         * /memory@addr nodes for all numa nodes respectively.
-         */
-        qemu_fdt_nop_node(fdt, "/memory");
         mem_base = binfo->loader_start;
         for (i = 0; i < nb_numa_nodes; i++) {
             mem_len = numa_info[i].node_mem;
@@ -XXX,XX +XXX,XX @@ int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo,
             g_free(nodename);
         }
     } else {
-        Error *err = NULL;
+        nodename = g_strdup_printf("/memory@%" PRIx64, binfo->loader_start);
+        qemu_fdt_add_subnode(fdt, nodename);
+        qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory");
 
-        rc = fdt_path_offset(fdt, "/memory");
-        if (rc < 0) {
-            qemu_fdt_add_subnode(fdt, "/memory");
-        }
-
-        if (!qemu_fdt_getprop(fdt, "/memory", "device_type", NULL, &err)) {
-            qemu_fdt_setprop_string(fdt, "/memory", "device_type", "memory");
-        }
-
-        rc = qemu_fdt_setprop_sized_cells(fdt, "/memory", "reg",
+        rc = qemu_fdt_setprop_sized_cells(fdt, nodename, "reg",
                                           acells, binfo->loader_start,
                                           scells, binfo->ram_size);
         if (rc < 0) {
-            fprintf(stderr, "couldn't set /memory/reg\n");
+            fprintf(stderr, "couldn't set %s reg\n", nodename);
             goto fail;
         }
+        g_free(nodename);
     }
 
     rc = fdt_path_offset(fdt, "/chosen");
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -XXX,XX +XXX,XX @@ static void create_fdt(VirtMachineState *vms)
     qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2);
     qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2);
 
-    /*
-     * /chosen and /memory nodes must exist for load_dtb
-     * to fill in necessary properties later
-     */
+    /* /chosen must exist for load_dtb to fill in necessary properties later */
     qemu_fdt_add_subnode(fdt, "/chosen");
-    qemu_fdt_add_subnode(fdt, "/memory");
-    qemu_fdt_setprop_string(fdt, "/memory", "device_type", "memory");
 
     /* Clock node, for the benefit of the UART. The kernel device tree
      * binding documentation claims the PL011 node clock properties are
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    |  35 +++++++++
 target/arm/sve_helper.c    | 153 +++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c | 121 +++++++++++++++++++++++++++++
 target/arm/sve.decode      |  34 +++++++++
 4 files changed, 343 insertions(+)

diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper-sve.h
+++ b/target/arm/helper-sve.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_rsqrts_s, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, i32)
 DEF_HELPER_FLAGS_5(gvec_rsqrts_d, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, i32)
+
+DEF_HELPER_FLAGS_4(sve_ld1bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld2bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld3bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld4bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_ld1hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld2hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld3hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld4hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_ld1ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld2ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld3ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld4ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_ld1dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld2dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld3dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld4dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_ld1bhu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld1bsu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld1bdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld1bhs_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld1bss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld1bds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_ld1hsu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld1hdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld1hss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld1hds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_ld1sdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ld1sds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve_helper.c
+++ b/target/arm/sve_helper.c
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_while)(void *vd, uint32_t count, uint32_t pred_desc)
 
     return predtest_ones(d, oprsz, esz_mask);
 }
+
+/*
+ * Load contiguous data, protected by a governing predicate.
+ */
+#define DO_LD1(NAME, FN, TYPEE, TYPEM, H)                  \
+static void do_##NAME(CPUARMState *env, void *vd, void *vg, \
+                      target_ulong addr, intptr_t oprsz,   \
+                      uintptr_t ra)                        \
+{                                                          \
+    intptr_t i = 0;                                        \
+    do {                                                   \
+        uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3));    \
+        do {                                               \
+            TYPEM m = 0;                                   \
+            if (pg & 1) {                                  \
+                m = FN(env, addr, ra);                     \
+            }                                              \
+            *(TYPEE *)(vd + H(i)) = m;                     \
+            i += sizeof(TYPEE), pg >>= sizeof(TYPEE);      \
+            addr += sizeof(TYPEM);                         \
+        } while (i & 15);                                  \
+    } while (i < oprsz);                                   \
+}                                                          \
+void HELPER(NAME)(CPUARMState *env, void *vg,              \
+                  target_ulong addr, uint32_t desc)        \
+{                                                          \
+    do_##NAME(env, &env->vfp.zregs[simd_data(desc)], vg,   \
+              addr, simd_oprsz(desc), GETPC());            \
+}
+
+#define DO_LD2(NAME, FN, TYPEE, TYPEM, H)                  \
+void HELPER(NAME)(CPUARMState *env, void *vg,              \
+                  target_ulong addr, uint32_t desc)        \
+{                                                          \
+    intptr_t i, oprsz = simd_oprsz(desc);                  \
+    intptr_t ra = GETPC();                                 \
+    unsigned rd = simd_data(desc);                         \
+    void *d1 = &env->vfp.zregs[rd];                        \
+    void *d2 = &env->vfp.zregs[(rd + 1) & 31];             \
+    for (i = 0; i < oprsz; ) {                             \
+        uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3));    \
+        do {                                               \
+            TYPEM m1 = 0, m2 = 0;                          \
+            if (pg & 1) {                                  \
+                m1 = FN(env, addr, ra);                    \
+                m2 = FN(env, addr + sizeof(TYPEM), ra);    \
+            }                                              \
+            *(TYPEE *)(d1 + H(i)) = m1;                    \
+            *(TYPEE *)(d2 + H(i)) = m2;                    \
+            i += sizeof(TYPEE), pg >>= sizeof(TYPEE);      \
+            addr += 2 * sizeof(TYPEM);                     \
+        } while (i & 15);                                  \
+    }                                                      \
+}
+
+#define DO_LD3(NAME, FN, TYPEE, TYPEM, H)                  \
+void HELPER(NAME)(CPUARMState *env, void *vg,              \
+                  target_ulong addr, uint32_t desc)        \
+{                                                          \
+    intptr_t i, oprsz = simd_oprsz(desc);                  \
+    intptr_t ra = GETPC();                                 \
+    unsigned rd = simd_data(desc);                         \
+    void *d1 = &env->vfp.zregs[rd];                        \
+    void *d2 = &env->vfp.zregs[(rd + 1) & 31];             \
+    void *d3 = &env->vfp.zregs[(rd + 2) & 31];             \
+    for (i = 0; i < oprsz; ) {                             \
+        uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3));    \
+        do {                                               \
+            TYPEM m1 = 0, m2 = 0, m3 = 0;                  \
+            if (pg & 1) {                                  \
+                m1 = FN(env, addr, ra);                    \
+                m2 = FN(env, addr + sizeof(TYPEM), ra);    \
+                m3 = FN(env, addr + 2 * sizeof(TYPEM), ra); \
+            }                                              \
+            *(TYPEE *)(d1 + H(i)) = m1;                    \
+            *(TYPEE *)(d2 + H(i)) = m2;                    \
+            *(TYPEE *)(d3 + H(i)) = m3;                    \
+            i += sizeof(TYPEE), pg >>= sizeof(TYPEE);      \
+            addr += 3 * sizeof(TYPEM);                     \
+        } while (i & 15);                                  \
+    }                                                      \
+}
+
+#define DO_LD4(NAME, FN, TYPEE, TYPEM, H)                  \
+void HELPER(NAME)(CPUARMState *env, void *vg,              \
+                  target_ulong addr, uint32_t desc)        \
+{                                                          \
+    intptr_t i, oprsz = simd_oprsz(desc);                  \
+    intptr_t ra = GETPC();                                 \
+    unsigned rd = simd_data(desc);                         \
+    void *d1 = &env->vfp.zregs[rd];                        \
+    void *d2 = &env->vfp.zregs[(rd + 1) & 31];             \
+    void *d3 = &env->vfp.zregs[(rd + 2) & 31];             \
+    void *d4 = &env->vfp.zregs[(rd + 3) & 31];             \
+    for (i = 0; i < oprsz; ) {                             \
+        uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3));    \
+        do {                                               \
+            TYPEM m1 = 0, m2 = 0, m3 = 0, m4 = 0;          \
+            if (pg & 1) {                                  \
+                m1 = FN(env, addr, ra);                    \
+                m2 = FN(env, addr + sizeof(TYPEM), ra);    \
+                m3 = FN(env, addr + 2 * sizeof(TYPEM), ra); \
+                m4 = FN(env, addr + 3 * sizeof(TYPEM), ra); \
+            }                                              \
+            *(TYPEE *)(d1 + H(i)) = m1;                    \
+            *(TYPEE *)(d2 + H(i)) = m2;                    \
+            *(TYPEE *)(d3 + H(i)) = m3;                    \
+            *(TYPEE *)(d4 + H(i)) = m4;                    \
+            i += sizeof(TYPEE), pg >>= sizeof(TYPEE);      \
+            addr += 4 * sizeof(TYPEM);                     \
+        } while (i & 15);                                  \
+    }                                                      \
+}
+
+DO_LD1(sve_ld1bhu_r, cpu_ldub_data_ra, uint16_t, uint8_t, H1_2)
+DO_LD1(sve_ld1bhs_r, cpu_ldsb_data_ra, uint16_t, int8_t, H1_2)
+DO_LD1(sve_ld1bsu_r, cpu_ldub_data_ra, uint32_t, uint8_t, H1_4)
+DO_LD1(sve_ld1bss_r, cpu_ldsb_data_ra, uint32_t, int8_t, H1_4)
+DO_LD1(sve_ld1bdu_r, cpu_ldub_data_ra, uint64_t, uint8_t, )
+DO_LD1(sve_ld1bds_r, cpu_ldsb_data_ra, uint64_t, int8_t, )
+
+DO_LD1(sve_ld1hsu_r, cpu_lduw_data_ra, uint32_t, uint16_t, H1_4)
+DO_LD1(sve_ld1hss_r, cpu_ldsw_data_ra, uint32_t, int8_t, H1_4)
+DO_LD1(sve_ld1hdu_r, cpu_lduw_data_ra, uint64_t, uint16_t, )
+DO_LD1(sve_ld1hds_r, cpu_ldsw_data_ra, uint64_t, int16_t, )
+
+DO_LD1(sve_ld1sdu_r, cpu_ldl_data_ra, uint64_t, uint32_t, )
+DO_LD1(sve_ld1sds_r, cpu_ldl_data_ra, uint64_t, int32_t, )
+
+DO_LD1(sve_ld1bb_r, cpu_ldub_data_ra, uint8_t, uint8_t, H1)
+DO_LD2(sve_ld2bb_r, cpu_ldub_data_ra, uint8_t, uint8_t, H1)
+DO_LD3(sve_ld3bb_r, cpu_ldub_data_ra, uint8_t, uint8_t, H1)
+DO_LD4(sve_ld4bb_r, cpu_ldub_data_ra, uint8_t, uint8_t, H1)
+
+DO_LD1(sve_ld1hh_r, cpu_lduw_data_ra, uint16_t, uint16_t, H1_2)
+DO_LD2(sve_ld2hh_r, cpu_lduw_data_ra, uint16_t, uint16_t, H1_2)
+DO_LD3(sve_ld3hh_r, cpu_lduw_data_ra, uint16_t, uint16_t, H1_2)
+DO_LD4(sve_ld4hh_r, cpu_lduw_data_ra, uint16_t, uint16_t, H1_2)
+
+DO_LD1(sve_ld1ss_r, cpu_ldl_data_ra, uint32_t, uint32_t, H1_4)
+DO_LD2(sve_ld2ss_r, cpu_ldl_data_ra, uint32_t, uint32_t, H1_4)
+DO_LD3(sve_ld3ss_r, cpu_ldl_data_ra, uint32_t, uint32_t, H1_4)
+DO_LD4(sve_ld4ss_r, cpu_ldl_data_ra, uint32_t, uint32_t, H1_4)
+
+DO_LD1(sve_ld1dd_r, cpu_ldq_data_ra, uint64_t, uint64_t, )
+DO_LD2(sve_ld2dd_r, cpu_ldq_data_ra, uint64_t, uint64_t, )
+DO_LD3(sve_ld3dd_r, cpu_ldq_data_ra, uint64_t, uint64_t, )
+DO_LD4(sve_ld4dd_r, cpu_ldq_data_ra, uint64_t, uint64_t, )
+
+#undef DO_LD1
+#undef DO_LD2
+#undef DO_LD3
+#undef DO_LD4
diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-sve.c
+++ b/target/arm/translate-sve.c
@@ -XXX,XX +XXX,XX @@ typedef void gen_helper_gvec_flags_3(TCGv_i32, TCGv_ptr, TCGv_ptr,
 typedef void gen_helper_gvec_flags_4(TCGv_i32, TCGv_ptr, TCGv_ptr,
                                      TCGv_ptr, TCGv_ptr, TCGv_i32);
 
+typedef void gen_helper_gvec_mem(TCGv_env, TCGv_ptr, TCGv_i64, TCGv_i32);
+
 /*
  * Helpers for extracting complex instruction fields.
  */
@@ -XXX,XX +XXX,XX @@ static inline int expand_imm_sh8u(int x)
     return (uint8_t)x << (x & 0x100 ? 8 : 0);
 }
 
+/* Convert a 2-bit memory size (msz) to a 4-bit data type (dtype)
+ * with unsigned data.  C.f. SVE Memory Contiguous Load Group.
+ */
+static inline int msz_dtype(int msz)
+{
+    static const uint8_t dtype[4] = { 0, 5, 10, 15 };
+    return dtype[msz];
+}
+
 /*
  * Include the generated decoder.
  */
@@ -XXX,XX +XXX,XX @@ static bool trans_LDR_pri(DisasContext *s, arg_rri *a, uint32_t insn)
     }
     return true;
 }
+
+/*
+ *** SVE Memory - Contiguous Load Group
+ */
+
+/* The memory mode of the dtype.  */
+static const TCGMemOp dtype_mop[16] = {
+    MO_UB, MO_UB, MO_UB, MO_UB,
+    MO_SL, MO_UW, MO_UW, MO_UW,
+    MO_SW, MO_SW, MO_UL, MO_UL,
+    MO_SB, MO_SB, MO_SB, MO_Q
+};
+
+#define dtype_msz(x)  (dtype_mop[x] & MO_SIZE)
+
+/* The vector element size of dtype.  */
+static const uint8_t dtype_esz[16] = {
+    0, 1, 2, 3,
+    3, 1, 2, 3,
+    3, 2, 2, 3,
+    3, 2, 1, 3
+};
+
+static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr,
+                       gen_helper_gvec_mem *fn)
+{
+    unsigned vsz = vec_full_reg_size(s);
+    TCGv_ptr t_pg;
+    TCGv_i32 desc;
+
+    /* For e.g. LD4, there are not enough arguments to pass all 4
+     * registers as pointers, so encode the regno into the data field.
+     * For consistency, do this even for LD1.
+     */
+    desc = tcg_const_i32(simd_desc(vsz, vsz, zt));
+    t_pg = tcg_temp_new_ptr();
+
+    tcg_gen_addi_ptr(t_pg, cpu_env, pred_full_reg_offset(s, pg));
+    fn(cpu_env, t_pg, addr, desc);
+
+    tcg_temp_free_ptr(t_pg);
+    tcg_temp_free_i32(desc);
+}
+
+static void do_ld_zpa(DisasContext *s, int zt, int pg,
+                      TCGv_i64 addr, int dtype, int nreg)
+{
+    static gen_helper_gvec_mem * const fns[16][4] = {
+        { gen_helper_sve_ld1bb_r, gen_helper_sve_ld2bb_r,
+          gen_helper_sve_ld3bb_r, gen_helper_sve_ld4bb_r },
+        { gen_helper_sve_ld1bhu_r, NULL, NULL, NULL },
+        { gen_helper_sve_ld1bsu_r, NULL, NULL, NULL },
+        { gen_helper_sve_ld1bdu_r, NULL, NULL, NULL },
+
+        { gen_helper_sve_ld1sds_r, NULL, NULL, NULL },
+        { gen_helper_sve_ld1hh_r, gen_helper_sve_ld2hh_r,
+          gen_helper_sve_ld3hh_r, gen_helper_sve_ld4hh_r },
+        { gen_helper_sve_ld1hsu_r, NULL, NULL, NULL },
+        { gen_helper_sve_ld1hdu_r, NULL, NULL, NULL },
+
+        { gen_helper_sve_ld1hds_r, NULL, NULL, NULL },
+        { gen_helper_sve_ld1hss_r, NULL, NULL, NULL },
+        { gen_helper_sve_ld1ss_r, gen_helper_sve_ld2ss_r,
+          gen_helper_sve_ld3ss_r, gen_helper_sve_ld4ss_r },
+        { gen_helper_sve_ld1sdu_r, NULL, NULL, NULL },
+
+        { gen_helper_sve_ld1bds_r, NULL, NULL, NULL },
+        { gen_helper_sve_ld1bss_r, NULL, NULL, NULL },
+        { gen_helper_sve_ld1bhs_r, NULL, NULL, NULL },
+        { gen_helper_sve_ld1dd_r, gen_helper_sve_ld2dd_r,
+          gen_helper_sve_ld3dd_r, gen_helper_sve_ld4dd_r },
+    };
+    gen_helper_gvec_mem *fn = fns[dtype][nreg];
+
+    /* While there are holes in the table, they are not
+     * accessible via the instruction encoding.
+     */
+    assert(fn != NULL);
+    do_mem_zpa(s, zt, pg, addr, fn);
+}
+
+static bool trans_LD_zprr(DisasContext *s, arg_rprr_load *a, uint32_t insn)
+{
+    if (a->rm == 31) {
+        return false;
+    }
+    if (sve_access_check(s)) {
+        TCGv_i64 addr = new_tmp_a64(s);
+        tcg_gen_muli_i64(addr, cpu_reg(s, a->rm),
+                         (a->nreg + 1) << dtype_msz(a->dtype));
+        tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn));
+        do_ld_zpa(s, a->rd, a->pg, addr, a->dtype, a->nreg);
+    }
+    return true;
+}
+
+static bool trans_LD_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn)
+{
+    if (sve_access_check(s)) {
+        int vsz = vec_full_reg_size(s);
+        int elements = vsz >> dtype_esz[a->dtype];
+        TCGv_i64 addr = new_tmp_a64(s);
+
+        tcg_gen_addi_i64(addr, cpu_reg_sp(s, a->rn),
+                         (a->imm * elements * (a->nreg + 1))
+                         << dtype_msz(a->dtype));
+        do_ld_zpa(s, a->rd, a->pg, addr, a->dtype, a->nreg);
+    }
+    return true;
+}
diff --git a/target/arm/sve.decode b/target/arm/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve.decode
+++ b/target/arm/sve.decode
@@ -XXX,XX +XXX,XX @@
 # Unsigned 8-bit immediate, optionally shifted left by 8.
 %sh8_i8u        5:9 !function=expand_imm_sh8u
 
+# Unsigned load of msz into esz=2, represented as a dtype.
+%msz_dtype      23:2 !function=msz_dtype
+
 # Either a copy of rd (at bit 0), or a different source
 # as propagated via the MOVPRFX instruction.
 %reg_movprfx    0:5
@@ -XXX,XX +XXX,XX @@
 &incdec2_cnt    rd rn pat esz imm d u
 &incdec_pred    rd pg esz d u
 &incdec2_pred   rd rn pg esz d u
+&rprr_load      rd pg rn rm dtype nreg
+&rpri_load      rd pg rn imm dtype nreg
 
 ###########################################################################
 # Named instruction formats.  These are generally used to
@@ -XXX,XX +XXX,XX @@
 @incdec2_pred   ........ esz:2 .... .. ..... .. pg:4 rd:5 \
                 &incdec2_pred rn=%reg_movprfx
 
+# Loads; user must fill in NREG.
+@rprr_load_dt   ....... dtype:4 rm:5 ... pg:3 rn:5 rd:5         &rprr_load
+@rpri_load_dt   ....... dtype:4 . imm:s4 ... pg:3 rn:5 rd:5     &rpri_load
+
+@rprr_load_msz  ....... .... rm:5 ... pg:3 rn:5 rd:5 \
+                &rprr_load dtype=%msz_dtype
+@rpri_load_msz  ....... .... . imm:s4 ... pg:3 rn:5 rd:5 \
+                &rpri_load dtype=%msz_dtype
+
 ###########################################################################
 # Instruction patterns.  Grouped according to the SVE encodingindex.xhtml.
 
@@ -XXX,XX +XXX,XX @@ LDR_pri         10000101 10 ...... 000 ... ..... 0 ....         @pd_rn_i9
 
 # SVE load vector register
 LDR_zri         10000101 10 ...... 010 ... ..... .....          @rd_rn_i9
+
+### SVE Memory Contiguous Load Group
+
+# SVE contiguous load (scalar plus scalar)
+LD_zprr         1010010 .... ..... 010 ... ..... .....    @rprr_load_dt nreg=0
+
+# SVE contiguous load (scalar plus immediate)
+LD_zpri         1010010 .... 0.... 101 ... ..... .....    @rpri_load_dt nreg=0
+
+# SVE contiguous non-temporal load (scalar plus scalar)
+# LDNT1B, LDNT1H, LDNT1W, LDNT1D
+# SVE load multiple structures (scalar plus scalar)
+# LD2B, LD2H, LD2W, LD2D; etc.
+LD_zprr         1010010 .. nreg:2 ..... 110 ... ..... .....     @rprr_load_msz
+
+# SVE contiguous non-temporal load (scalar plus immediate)
+# LDNT1B, LDNT1H, LDNT1W, LDNT1D
+# SVE load multiple structures (scalar plus immediate)
+# LD2B, LD2H, LD2W, LD2D; etc.
+LD_zpri         1010010 .. nreg:2 0.... 111 ... ..... .....     @rpri_load_msz
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180627043328.11531-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    |  40 ++++++++++
 target/arm/sve_helper.c    | 157 +++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c |  69 ++++++++++++++++
 target/arm/sve.decode      |   6 ++
 4 files changed, 272 insertions(+)

diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper-sve.h
+++ b/target/arm/helper-sve.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(sve_ld1hds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
 
 DEF_HELPER_FLAGS_4(sve_ld1sdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
 DEF_HELPER_FLAGS_4(sve_ld1sds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_ldff1bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldff1bhu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldff1bsu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldff1bdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldff1bhs_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldff1bss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldff1bds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_ldff1hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldff1hsu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldff1hdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldff1hss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldff1hds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_ldff1ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldff1sdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldff1sds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_ldff1dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_ldnf1bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldnf1bhu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldnf1bsu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldnf1bdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldnf1bhs_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldnf1bss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldnf1bds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_ldnf1hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldnf1hsu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldnf1hdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldnf1hss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldnf1hds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_ldnf1ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldnf1sdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_ldnf1sds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_ldnf1dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve_helper.c
+++ b/target/arm/sve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_LD4(sve_ld4dd_r, cpu_ldq_data_ra, uint64_t, uint64_t, )
 #undef DO_LD2
 #undef DO_LD3
 #undef DO_LD4
+
+/*
+ * Load contiguous data, first-fault and no-fault.
+ */
+
+#ifdef CONFIG_USER_ONLY
+
+/* Fault on byte I.  All bits in FFR from I are cleared.  The vector
+ * result from I is CONSTRAINED UNPREDICTABLE; we choose the MERGE
+ * option, which leaves subsequent data unchanged.
+ */
+static void record_fault(CPUARMState *env, uintptr_t i, uintptr_t oprsz)
+{
+    uint64_t *ffr = env->vfp.pregs[FFR_PRED_NUM].p;
+
+    if (i & 63) {
+        ffr[i / 64] &= MAKE_64BIT_MASK(0, i & 63);
+        i = ROUND_UP(i, 64);
+    }
+    for (; i < oprsz; i += 64) {
+        ffr[i / 64] = 0;
+    }
+}
+
+/* Hold the mmap lock during the operation so that there is no race
+ * between page_check_range and the load operation.  We expect the
+ * usual case to have no faults at all, so we check the whole range
+ * first and if successful defer to the normal load operation.
+ *
+ * TODO: Change mmap_lock to a rwlock so that multiple readers
+ * can run simultaneously.  This will probably help other uses
+ * within QEMU as well.
+ */
+#define DO_LDFF1(PART, FN, TYPEE, TYPEM, H)                             \
+static void do_sve_ldff1##PART(CPUARMState *env, void *vd, void *vg,    \
+                               target_ulong addr, intptr_t oprsz,       \
+                               bool first, uintptr_t ra)                \
+{                                                                       \
+    intptr_t i = 0;                                                     \
+    do {                                                                \
+        uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3));                 \
+        do {                                                            \
+            TYPEM m = 0;                                                \
+            if (pg & 1) {                                               \
+                if (!first &&                                           \
+                    unlikely(page_check_range(addr, sizeof(TYPEM),      \
+                                              PAGE_READ))) {            \
+                    record_fault(env, i, oprsz);                        \
+                    return;                                             \
+                }                                                       \
+                m = FN(env, addr, ra);                                  \
+                first = false;                                          \
+            }                                                           \
+            *(TYPEE *)(vd + H(i)) = m;                                  \
+            i += sizeof(TYPEE), pg >>= sizeof(TYPEE);                   \
+            addr += sizeof(TYPEM);                                      \
+        } while (i & 15);                                               \
+    } while (i < oprsz);                                                \
+}                                                                       \
+void HELPER(sve_ldff1##PART)(CPUARMState *env, void *vg,                \
+                             target_ulong addr, uint32_t desc)          \
+{                                                                       \
+    intptr_t oprsz = simd_oprsz(desc);                                  \
+    unsigned rd = simd_data(desc);                                      \
+    void *vd = &env->vfp.zregs[rd];                                     \
+    mmap_lock();                                                        \
+    if (likely(page_check_range(addr, oprsz, PAGE_READ) == 0)) {        \
+        do_sve_ld1##PART(env, vd, vg, addr, oprsz, GETPC());            \
+    } else {                                                            \
+        do_sve_ldff1##PART(env, vd, vg, addr, oprsz, true, GETPC());    \
+    }                                                                   \
+    mmap_unlock();                                                      \
+}
+
+/* No-fault loads are like first-fault loads without the
+ * first faulting special case.
+ */
+#define DO_LDNF1(PART)                                                  \
+void HELPER(sve_ldnf1##PART)(CPUARMState *env, void *vg,                \
+                             target_ulong addr, uint32_t desc)          \
+{                                                                       \
+    intptr_t oprsz = simd_oprsz(desc);                                  \
+    unsigned rd = simd_data(desc);                                      \
+    void *vd = &env->vfp.zregs[rd];                                     \
+    mmap_lock();                                                        \
+    if (likely(page_check_range(addr, oprsz, PAGE_READ) == 0)) {        \
+        do_sve_ld1##PART(env, vd, vg, addr, oprsz, GETPC());            \
+    } else {                                                            \
+        do_sve_ldff1##PART(env, vd, vg, addr, oprsz, false, GETPC());   \
+    }                                                                   \
+    mmap_unlock();                                                      \
+}
+
+#else
+
+/* TODO: System mode is not yet supported.
+ * This would probably use tlb_vaddr_to_host.
+ */
+#define DO_LDFF1(PART, FN, TYPEE, TYPEM, H)                     \
+void HELPER(sve_ldff1##PART)(CPUARMState *env, void *vg,        \
+                  target_ulong addr, uint32_t desc)             \
+{                                                               \
+    g_assert_not_reached();                                     \
+}
+
+#define DO_LDNF1(PART)                                          \
+void HELPER(sve_ldnf1##PART)(CPUARMState *env, void *vg,        \
+                  target_ulong addr, uint32_t desc)             \
+{                                                               \
+    g_assert_not_reached();                                     \
+}
+
+#endif
+
+DO_LDFF1(bb_r,  cpu_ldub_data_ra, uint8_t, uint8_t, H1)
+DO_LDFF1(bhu_r, cpu_ldub_data_ra, uint16_t, uint8_t, H1_2)
+DO_LDFF1(bhs_r, cpu_ldsb_data_ra, uint16_t, int8_t, H1_2)
+DO_LDFF1(bsu_r, cpu_ldub_data_ra, uint32_t, uint8_t, H1_4)
+DO_LDFF1(bss_r, cpu_ldsb_data_ra, uint32_t, int8_t, H1_4)
+DO_LDFF1(bdu_r, cpu_ldub_data_ra, uint64_t, uint8_t, )
+DO_LDFF1(bds_r, cpu_ldsb_data_ra, uint64_t, int8_t, )
+
+DO_LDFF1(hh_r,  cpu_lduw_data_ra, uint16_t, uint16_t, H1_2)
+DO_LDFF1(hsu_r, cpu_lduw_data_ra, uint32_t, uint16_t, H1_4)
+DO_LDFF1(hss_r, cpu_ldsw_data_ra, uint32_t, int8_t, H1_4)
+DO_LDFF1(hdu_r, cpu_lduw_data_ra, uint64_t, uint16_t, )
+DO_LDFF1(hds_r, cpu_ldsw_data_ra, uint64_t, int16_t, )
+
+DO_LDFF1(ss_r,  cpu_ldl_data_ra, uint32_t, uint32_t, H1_4)
+DO_LDFF1(sdu_r, cpu_ldl_data_ra, uint64_t, uint32_t, )
+DO_LDFF1(sds_r, cpu_ldl_data_ra, uint64_t, int32_t, )
+
+DO_LDFF1(dd_r,  cpu_ldq_data_ra, uint64_t, uint64_t, )
+
+#undef DO_LDFF1
+
+DO_LDNF1(bb_r)
+DO_LDNF1(bhu_r)
+DO_LDNF1(bhs_r)
+DO_LDNF1(bsu_r)
+DO_LDNF1(bss_r)
+DO_LDNF1(bdu_r)
+DO_LDNF1(bds_r)
+
+DO_LDNF1(hh_r)
+DO_LDNF1(hsu_r)
+DO_LDNF1(hss_r)
+DO_LDNF1(hdu_r)
+DO_LDNF1(hds_r)
+
+DO_LDNF1(ss_r)
+DO_LDNF1(sdu_r)
+DO_LDNF1(sds_r)
+
+DO_LDNF1(dd_r)
+
+#undef DO_LDNF1
diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-sve.c
+++ b/target/arm/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static bool trans_LD_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn)
     }
     return true;
 }
+
+static bool trans_LDFF1_zprr(DisasContext *s, arg_rprr_load *a, uint32_t insn)
+{
+    static gen_helper_gvec_mem * const fns[16] = {
+        gen_helper_sve_ldff1bb_r,
+        gen_helper_sve_ldff1bhu_r,
+        gen_helper_sve_ldff1bsu_r,
+        gen_helper_sve_ldff1bdu_r,
+
+        gen_helper_sve_ldff1sds_r,
+        gen_helper_sve_ldff1hh_r,
+        gen_helper_sve_ldff1hsu_r,
+        gen_helper_sve_ldff1hdu_r,
+
+        gen_helper_sve_ldff1hds_r,
+        gen_helper_sve_ldff1hss_r,
+        gen_helper_sve_ldff1ss_r,
+        gen_helper_sve_ldff1sdu_r,
+
+        gen_helper_sve_ldff1bds_r,
+        gen_helper_sve_ldff1bss_r,
+        gen_helper_sve_ldff1bhs_r,
+        gen_helper_sve_ldff1dd_r,
+    };
+
+    if (sve_access_check(s)) {
+        TCGv_i64 addr = new_tmp_a64(s);
+        tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), dtype_msz(a->dtype));
+        tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn));
+        do_mem_zpa(s, a->rd, a->pg, addr, fns[a->dtype]);
+    }
+    return true;
+}
+
+static bool trans_LDNF1_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn)
+{
+    static gen_helper_gvec_mem * const fns[16] = {
+        gen_helper_sve_ldnf1bb_r,
+        gen_helper_sve_ldnf1bhu_r,
+        gen_helper_sve_ldnf1bsu_r,
+        gen_helper_sve_ldnf1bdu_r,
+
+        gen_helper_sve_ldnf1sds_r,
+        gen_helper_sve_ldnf1hh_r,
+        gen_helper_sve_ldnf1hsu_r,
+        gen_helper_sve_ldnf1hdu_r,
+
+        gen_helper_sve_ldnf1hds_r,
+        gen_helper_sve_ldnf1hss_r,
+        gen_helper_sve_ldnf1ss_r,
+        gen_helper_sve_ldnf1sdu_r,
+
+        gen_helper_sve_ldnf1bds_r,
+        gen_helper_sve_ldnf1bss_r,
+        gen_helper_sve_ldnf1bhs_r,
+        gen_helper_sve_ldnf1dd_r,
+    };
+
+    if (sve_access_check(s)) {
+        int vsz = vec_full_reg_size(s);
+        int elements = vsz >> dtype_esz[a->dtype];
+        int off = (a->imm * elements) << dtype_msz(a->dtype);
+        TCGv_i64 addr = new_tmp_a64(s);
+
+        tcg_gen_addi_i64(addr, cpu_reg_sp(s, a->rn), off);
+        do_mem_zpa(s, a->rd, a->pg, addr, fns[a->dtype]);
+    }
+    return true;
+}
diff --git a/target/arm/sve.decode b/target/arm/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve.decode
+++ b/target/arm/sve.decode
@@ -XXX,XX +XXX,XX @@ LDR_zri         10000101 10 ...... 010 ... ..... .....          @rd_rn_i9
 # SVE contiguous load (scalar plus scalar)
 LD_zprr         1010010 .... ..... 010 ... ..... .....    @rprr_load_dt nreg=0
 
+# SVE contiguous first-fault load (scalar plus scalar)
+LDFF1_zprr      1010010 .... ..... 011 ... ..... .....    @rprr_load_dt nreg=0
+
 # SVE contiguous load (scalar plus immediate)
 LD_zpri         1010010 .... 0.... 101 ... ..... .....    @rpri_load_dt nreg=0
 
+# SVE contiguous non-fault load (scalar plus immediate)
+LDNF1_zpri      1010010 .... 1.... 101 ... ..... .....    @rpri_load_dt nreg=0
+
 # SVE contiguous non-temporal load (scalar plus scalar)
 # LDNT1B, LDNT1H, LDNT1W, LDNT1D
 # SVE load multiple structures (scalar plus scalar)
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    |  29 +++++
 target/arm/sve_helper.c    | 211 +++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c |  65 ++++++++++++
 target/arm/sve.decode      |  38 +++++++
 4 files changed, 343 insertions(+)

diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper-sve.h
+++ b/target/arm/helper-sve.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(sve_ldnf1sdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
 DEF_HELPER_FLAGS_4(sve_ldnf1sds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
 
 DEF_HELPER_FLAGS_4(sve_ldnf1dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_st1bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st2bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st3bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st4bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_st1hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st2hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st3hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st4hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_st1ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st2ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st3ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st4ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_st1dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st2dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st3dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st4dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_st1bh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st1bs_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st1bd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_st1hs_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+DEF_HELPER_FLAGS_4(sve_st1hd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_4(sve_st1sd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve_helper.c
+++ b/target/arm/sve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_LDNF1(sds_r)
 DO_LDNF1(dd_r)
 
 #undef DO_LDNF1
+
+/*
+ * Store contiguous data, protected by a governing predicate.
+ */
+#define DO_ST1(NAME, FN, TYPEE, TYPEM, H)                  \
+void HELPER(NAME)(CPUARMState *env, void *vg,              \
+                  target_ulong addr, uint32_t desc)        \
+{                                                          \
+    intptr_t i, oprsz = simd_oprsz(desc);                  \
+    intptr_t ra = GETPC();                                 \
+    unsigned rd = simd_data(desc);                         \
+    void *vd = &env->vfp.zregs[rd];                        \
+    for (i = 0; i < oprsz; ) {                             \
+        uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3));    \
+        do {                                               \
+            if (pg & 1) {                                  \
+                TYPEM m = *(TYPEE *)(vd + H(i));           \
+                FN(env, addr, m, ra);                      \
+            }                                              \
+            i += sizeof(TYPEE), pg >>= sizeof(TYPEE);      \
+            addr += sizeof(TYPEM);                         \
+        } while (i & 15);                                  \
+    }                                                      \
+}
+
+#define DO_ST1_D(NAME, FN, TYPEM)                          \
+void HELPER(NAME)(CPUARMState *env, void *vg,              \
+                  target_ulong addr, uint32_t desc)        \
+{                                                          \
+    intptr_t i, oprsz = simd_oprsz(desc) / 8;              \
+    intptr_t ra = GETPC();                                 \
+    unsigned rd = simd_data(desc);                         \
+    uint64_t *d = &env->vfp.zregs[rd].d[0];                \
+    uint8_t *pg = vg;                                      \
+    for (i = 0; i < oprsz; i += 1) {                       \
+        if (pg[H1(i)] & 1) {                               \
+            FN(env, addr, d[i], ra);                       \
+        }                                                  \
+        addr += sizeof(TYPEM);                             \
+    }                                                      \
+}
+
+#define DO_ST2(NAME, FN, TYPEE, TYPEM, H)                  \
+void HELPER(NAME)(CPUARMState *env, void *vg,              \
+                  target_ulong addr, uint32_t desc)        \
+{                                                          \
+    intptr_t i, oprsz = simd_oprsz(desc);                  \
+    intptr_t ra = GETPC();                                 \
+    unsigned rd = simd_data(desc);                         \
+    void *d1 = &env->vfp.zregs[rd];                        \
+    void *d2 = &env->vfp.zregs[(rd + 1) & 31];             \
+    for (i = 0; i < oprsz; ) {                             \
+        uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3));    \
+        do {                                               \
+            if (pg & 1) {                                  \
+                TYPEM m1 = *(TYPEE *)(d1 + H(i));          \
+                TYPEM m2 = *(TYPEE *)(d2 + H(i));          \
+                FN(env, addr, m1, ra);                     \
+                FN(env, addr + sizeof(TYPEM), m2, ra);     \
+            }                                              \
+            i += sizeof(TYPEE), pg >>= sizeof(TYPEE);      \
+            addr += 2 * sizeof(TYPEM);                     \
+        } while (i & 15);                                  \
+    }                                                      \
+}
+
+#define DO_ST3(NAME, FN, TYPEE, TYPEM, H)                  \
+void HELPER(NAME)(CPUARMState *env, void *vg,              \
+                  target_ulong addr, uint32_t desc)        \
+{                                                          \
+    intptr_t i, oprsz = simd_oprsz(desc);                  \
+    intptr_t ra = GETPC();                                 \
+    unsigned rd = simd_data(desc);                         \
+    void *d1 = &env->vfp.zregs[rd];                        \
+    void *d2 = &env->vfp.zregs[(rd + 1) & 31];             \
+    void *d3 = &env->vfp.zregs[(rd + 2) & 31];             \
+    for (i = 0; i < oprsz; ) {                             \
+        uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3));    \
+        do {                                               \
+            if (pg & 1) {                                  \
+                TYPEM m1 = *(TYPEE *)(d1 + H(i));          \
+                TYPEM m2 = *(TYPEE *)(d2 + H(i));          \
+                TYPEM m3 = *(TYPEE *)(d3 + H(i));          \
+                FN(env, addr, m1, ra);                     \
+                FN(env, addr + sizeof(TYPEM), m2, ra);     \
+                FN(env, addr + 2 * sizeof(TYPEM), m3, ra); \
+            }                                              \
+            i += sizeof(TYPEE), pg >>= sizeof(TYPEE);      \
+            addr += 3 * sizeof(TYPEM);                     \
+        } while (i & 15);                                  \
+    }                                                      \
+}
+
+#define DO_ST4(NAME, FN, TYPEE, TYPEM, H)                  \
+void HELPER(NAME)(CPUARMState *env, void *vg,              \
+                  target_ulong addr, uint32_t desc)        \
+{                                                          \
+    intptr_t i, oprsz = simd_oprsz(desc);                  \
+    intptr_t ra = GETPC();                                 \
+    unsigned rd = simd_data(desc);                         \
+    void *d1 = &env->vfp.zregs[rd];                        \
+    void *d2 = &env->vfp.zregs[(rd + 1) & 31];             \
+    void *d3 = &env->vfp.zregs[(rd + 2) & 31];             \
+    void *d4 = &env->vfp.zregs[(rd + 3) & 31];             \
+    for (i = 0; i < oprsz; ) {                             \
+        uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3));    \
+        do {                                               \
+            if (pg & 1) {                                  \
+                TYPEM m1 = *(TYPEE *)(d1 + H(i));          \
+                TYPEM m2 = *(TYPEE *)(d2 + H(i));          \
+                TYPEM m3 = *(TYPEE *)(d3 + H(i));          \
+                TYPEM m4 = *(TYPEE *)(d4 + H(i));          \
+                FN(env, addr, m1, ra);                     \
+                FN(env, addr + sizeof(TYPEM), m2, ra);     \
+                FN(env, addr + 2 * sizeof(TYPEM), m3, ra); \
+                FN(env, addr + 3 * sizeof(TYPEM), m4, ra); \
+            }                                              \
+            i += sizeof(TYPEE), pg >>= sizeof(TYPEE);      \
+            addr += 4 * sizeof(TYPEM);                     \
+        } while (i & 15);                                  \
+    }                                                      \
+}
+
+DO_ST1(sve_st1bh_r, cpu_stb_data_ra, uint16_t, uint8_t, H1_2)
+DO_ST1(sve_st1bs_r, cpu_stb_data_ra, uint32_t, uint8_t, H1_4)
+DO_ST1_D(sve_st1bd_r, cpu_stb_data_ra, uint8_t)
+
+DO_ST1(sve_st1hs_r, cpu_stw_data_ra, uint32_t, uint16_t, H1_4)
+DO_ST1_D(sve_st1hd_r, cpu_stw_data_ra, uint16_t)
+
+DO_ST1_D(sve_st1sd_r, cpu_stl_data_ra, uint32_t)
+
+DO_ST1(sve_st1bb_r, cpu_stb_data_ra, uint8_t, uint8_t, H1)
+DO_ST2(sve_st2bb_r, cpu_stb_data_ra, uint8_t, uint8_t, H1)
+DO_ST3(sve_st3bb_r, cpu_stb_data_ra, uint8_t, uint8_t, H1)
+DO_ST4(sve_st4bb_r, cpu_stb_data_ra, uint8_t, uint8_t, H1)
+
+DO_ST1(sve_st1hh_r, cpu_stw_data_ra, uint16_t, uint16_t, H1_2)
+DO_ST2(sve_st2hh_r, cpu_stw_data_ra, uint16_t, uint16_t, H1_2)
+DO_ST3(sve_st3hh_r, cpu_stw_data_ra, uint16_t, uint16_t, H1_2)
+DO_ST4(sve_st4hh_r, cpu_stw_data_ra, uint16_t, uint16_t, H1_2)
+
+DO_ST1(sve_st1ss_r, cpu_stl_data_ra, uint32_t, uint32_t, H1_4)
+DO_ST2(sve_st2ss_r, cpu_stl_data_ra, uint32_t, uint32_t, H1_4)
+DO_ST3(sve_st3ss_r, cpu_stl_data_ra, uint32_t, uint32_t, H1_4)
+DO_ST4(sve_st4ss_r, cpu_stl_data_ra, uint32_t, uint32_t, H1_4)
+
+DO_ST1_D(sve_st1dd_r, cpu_stq_data_ra, uint64_t)
+
+void HELPER(sve_st2dd_r)(CPUARMState *env, void *vg,
+                         target_ulong addr, uint32_t desc)
+{
+    intptr_t i, oprsz = simd_oprsz(desc) / 8;
+    intptr_t ra = GETPC();
+    unsigned rd = simd_data(desc);
+    uint64_t *d1 = &env->vfp.zregs[rd].d[0];
+    uint64_t *d2 = &env->vfp.zregs[(rd + 1) & 31].d[0];
+    uint8_t *pg = vg;
+
+    for (i = 0; i < oprsz; i += 1) {
+        if (pg[H1(i)] & 1) {
+            cpu_stq_data_ra(env, addr, d1[i], ra);
+            cpu_stq_data_ra(env, addr + 8, d2[i], ra);
+        }
+        addr += 2 * 8;
+    }
+}
+
+void HELPER(sve_st3dd_r)(CPUARMState *env, void *vg,
+                         target_ulong addr, uint32_t desc)
+{
+    intptr_t i, oprsz = simd_oprsz(desc) / 8;
+    intptr_t ra = GETPC();
+    unsigned rd = simd_data(desc);
+    uint64_t *d1 = &env->vfp.zregs[rd].d[0];
+    uint64_t *d2 = &env->vfp.zregs[(rd + 1) & 31].d[0];
+    uint64_t *d3 = &env->vfp.zregs[(rd + 2) & 31].d[0];
+    uint8_t *pg = vg;
+
+    for (i = 0; i < oprsz; i += 1) {
+        if (pg[H1(i)] & 1) {
+            cpu_stq_data_ra(env, addr, d1[i], ra);
+            cpu_stq_data_ra(env, addr + 8, d2[i], ra);
+            cpu_stq_data_ra(env, addr + 16, d3[i], ra);
+        }
+        addr += 3 * 8;
+    }
+}
+
+void HELPER(sve_st4dd_r)(CPUARMState *env, void *vg,
+                         target_ulong addr, uint32_t desc)
+{
+    intptr_t i, oprsz = simd_oprsz(desc) / 8;
+    intptr_t ra = GETPC();
+    unsigned rd = simd_data(desc);
+    uint64_t *d1 = &env->vfp.zregs[rd].d[0];
+    uint64_t *d2 = &env->vfp.zregs[(rd + 1) & 31].d[0];
+    uint64_t *d3 = &env->vfp.zregs[(rd + 2) & 31].d[0];
+    uint64_t *d4 = &env->vfp.zregs[(rd + 3) & 31].d[0];
+    uint8_t *pg = vg;
+
+    for (i = 0; i < oprsz; i += 1) {
+        if (pg[H1(i)] & 1) {
+            cpu_stq_data_ra(env, addr, d1[i], ra);
+            cpu_stq_data_ra(env, addr + 8, d2[i], ra);
+            cpu_stq_data_ra(env, addr + 16, d3[i], ra);
+            cpu_stq_data_ra(env, addr + 24, d4[i], ra);
+        }
+        addr += 4 * 8;
+    }
+}
diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-sve.c
+++ b/target/arm/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static bool trans_LDNF1_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn)
     }
     return true;
 }
+
+static void do_st_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr,
+                      int msz, int esz, int nreg)
+{
+    static gen_helper_gvec_mem * const fn_single[4][4] = {
+        { gen_helper_sve_st1bb_r, gen_helper_sve_st1bh_r,
+          gen_helper_sve_st1bs_r, gen_helper_sve_st1bd_r },
+        { NULL,                   gen_helper_sve_st1hh_r,
+          gen_helper_sve_st1hs_r, gen_helper_sve_st1hd_r },
+        { NULL, NULL,
+          gen_helper_sve_st1ss_r, gen_helper_sve_st1sd_r },
+        { NULL, NULL, NULL, gen_helper_sve_st1dd_r },
+    };
+    static gen_helper_gvec_mem * const fn_multiple[3][4] = {
+        { gen_helper_sve_st2bb_r, gen_helper_sve_st2hh_r,
+          gen_helper_sve_st2ss_r, gen_helper_sve_st2dd_r },
+        { gen_helper_sve_st3bb_r, gen_helper_sve_st3hh_r,
+          gen_helper_sve_st3ss_r, gen_helper_sve_st3dd_r },
+        { gen_helper_sve_st4bb_r, gen_helper_sve_st4hh_r,
+          gen_helper_sve_st4ss_r, gen_helper_sve_st4dd_r },
+    };
+    gen_helper_gvec_mem *fn;
+
+    if (nreg == 0) {
+        /* ST1 */
+        fn = fn_single[msz][esz];
+    } else {
+        /* ST2, ST3, ST4 -- msz == esz, enforced by encoding */
+        assert(msz == esz);
+        fn = fn_multiple[nreg - 1][msz];
+    }
+    assert(fn != NULL);
+    do_mem_zpa(s, zt, pg, addr, fn);
+}
+
+static bool trans_ST_zprr(DisasContext *s, arg_rprr_store *a, uint32_t insn)
+{
+    if (a->rm == 31 || a->msz > a->esz) {
+        return false;
+    }
+    if (sve_access_check(s)) {
+        TCGv_i64 addr = new_tmp_a64(s);
+        tcg_gen_muli_i64(addr, cpu_reg(s, a->rm), (a->nreg + 1) << a->msz);
+        tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn));
+        do_st_zpa(s, a->rd, a->pg, addr, a->msz, a->esz, a->nreg);
+    }
+    return true;
+}
+
+static bool trans_ST_zpri(DisasContext *s, arg_rpri_store *a, uint32_t insn)
+{
+    if (a->msz > a->esz) {
+        return false;
+    }
+    if (sve_access_check(s)) {
+        int vsz = vec_full_reg_size(s);
+        int elements = vsz >> a->esz;
+        TCGv_i64 addr = new_tmp_a64(s);
+
+        tcg_gen_addi_i64(addr, cpu_reg_sp(s, a->rn),
+                         (a->imm * elements * (a->nreg + 1)) << a->msz);
+        do_st_zpa(s, a->rd, a->pg, addr, a->msz, a->esz, a->nreg);
+    }
+    return true;
+}
diff --git a/target/arm/sve.decode b/target/arm/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve.decode
+++ b/target/arm/sve.decode
@@ -XXX,XX +XXX,XX @@
 %imm7_22_16     22:2 16:5
 %imm8_16_10     16:5 10:3
 %imm9_16_10     16:s6 10:3
+%size_23        23:2
 
 # A combination of tsz:imm3 -- extract esize.
 %tszimm_esz     22:2 5:5 !function=tszimm_esz
@@ -XXX,XX +XXX,XX @@
 &incdec2_pred   rd rn pg esz d u
 &rprr_load      rd pg rn rm dtype nreg
 &rpri_load      rd pg rn imm dtype nreg
+&rprr_store     rd pg rn rm msz esz nreg
+&rpri_store     rd pg rn imm msz esz nreg
 
 ###########################################################################
 # Named instruction formats.  These are generally used to
@@ -XXX,XX +XXX,XX @@
 @rpri_load_msz  ....... .... . imm:s4 ... pg:3 rn:5 rd:5 \
                 &rpri_load dtype=%msz_dtype
 
+# Stores; user must fill in ESZ, MSZ, NREG as needed.
+@rprr_store         ....... ..    ..     rm:5 ... pg:3 rn:5 rd:5    &rprr_store
+@rpri_store_msz     ....... msz:2 .. . imm:s4 ... pg:3 rn:5 rd:5    &rpri_store
+@rprr_store_esz_n0  ....... ..    esz:2  rm:5 ... pg:3 rn:5 rd:5 \
+                    &rprr_store nreg=0
+
 ###########################################################################
 # Instruction patterns.  Grouped according to the SVE encodingindex.xhtml.
 
@@ -XXX,XX +XXX,XX @@ LD_zprr         1010010 .. nreg:2 ..... 110 ... ..... .....     @rprr_load_msz
 # SVE load multiple structures (scalar plus immediate)
 # LD2B, LD2H, LD2W, LD2D; etc.
 LD_zpri         1010010 .. nreg:2 0.... 111 ... ..... .....     @rpri_load_msz
+
+### SVE Memory Store Group
+
+# SVE contiguous store (scalar plus immediate)
+# ST1B, ST1H, ST1W, ST1D; require msz <= esz
+ST_zpri         1110010 .. esz:2  0.... 111 ... ..... ..... \
+                @rpri_store_msz nreg=0
+
+# SVE contiguous store (scalar plus scalar)
+# ST1B, ST1H, ST1W, ST1D; require msz <= esz
+# Enumerate msz lest we conflict with STR_zri.
+ST_zprr         1110010 00 ..     ..... 010 ... ..... ..... \
+                @rprr_store_esz_n0 msz=0
+ST_zprr         1110010 01 ..     ..... 010 ... ..... ..... \
+                @rprr_store_esz_n0 msz=1
+ST_zprr         1110010 10 ..     ..... 010 ... ..... ..... \
+                @rprr_store_esz_n0 msz=2
+ST_zprr         1110010 11 11     ..... 010 ... ..... ..... \
+                @rprr_store msz=3 esz=3 nreg=0
+
+# SVE contiguous non-temporal store (scalar plus immediate)  (nreg == 0)
+# SVE store multiple structures (scalar plus immediate)      (nreg != 0)
+ST_zpri         1110010 .. nreg:2 1.... 111 ... ..... ..... \
+                @rpri_store_msz esz=%size_23
+
+# SVE contiguous non-temporal store (scalar plus scalar)     (nreg == 0)
+# SVE store multiple structures (scalar plus scalar)         (nreg != 0)
+ST_zprr         1110010 msz:2 nreg:2 ..... 011 ... ..... ..... \
+                @rprr_store esz=%size_23
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/translate-sve.c | 52 ++++++++++++++++++++++++++++++++++++++
 target/arm/sve.decode      |  9 +++++++
 2 files changed, 61 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: fixed typo]
Message-id: 20180627043328.11531-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    | 30 +++++++++++++
 target/arm/sve_helper.c    | 38 ++++++++++++++++
 target/arm/translate-sve.c | 90 ++++++++++++++++++++++++++++++++++++++
 target/arm/sve.decode      | 22 ++++++++++
 4 files changed, 180 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    | 77 +++++++++++++++++++++++++++++++++
 target/arm/sve_helper.c    | 89 ++++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c | 46 ++++++++++++++++++++
 target/arm/sve.decode      | 17 ++++++++
 4 files changed, 229 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180627043328.11531-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    |  16 ++++
 target/arm/sve_helper.c    | 158 +++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c |  49 ++++++++++++
 target/arm/sve.decode      |  18 +++++
 4 files changed, 241 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    |  7 +++++
 target/arm/sve_helper.c    | 56 ++++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c | 45 ++++++++++++++++++++++++++++++
 target/arm/sve.decode      |  5 ++++
 4 files changed, 113 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    |  5 +++
 target/arm/sve_helper.c    | 41 +++++++++++++++++++++++++
 target/arm/translate-sve.c | 62 ++++++++++++++++++++++++++++++++++++++
 target/arm/sve.decode      |  5 +++
 4 files changed, 113 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/translate-sve.c | 103 +++++++++++++++++++++++++++++++++++++
 target/arm/sve.decode      |   6 +++
 2 files changed, 109 insertions(+)

diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-sve.c
+++ b/target/arm/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, uint32_t len,
     tcg_temp_free_i64(t0);
 }
 
+/* Similarly for stores.  */
+static void do_str(DisasContext *s, uint32_t vofs, uint32_t len,
+                   int rn, int imm)
+{
+    uint32_t len_align = QEMU_ALIGN_DOWN(len, 8);
+    uint32_t len_remain = len % 8;
+    uint32_t nparts = len / 8 + ctpop8(len_remain);
+    int midx = get_mem_index(s);
+    TCGv_i64 addr, t0;
+
+    addr = tcg_temp_new_i64();
+    t0 = tcg_temp_new_i64();
+
+    /* Note that unpredicated load/store of vector/predicate registers
+     * are defined as a stream of bytes, which equates to little-endian
+     * operations on larger quantities.  There is no nice way to force
+     * a little-endian store for aarch64_be-linux-user out of line.
+     *
+     * Attempt to keep code expansion to a minimum by limiting the
+     * amount of unrolling done.
+     */
+    if (nparts <= 4) {
+        int i;
+
+        for (i = 0; i < len_align; i += 8) {
+            tcg_gen_ld_i64(t0, cpu_env, vofs + i);
+            tcg_gen_addi_i64(addr, cpu_reg_sp(s, rn), imm + i);
+            tcg_gen_qemu_st_i64(t0, addr, midx, MO_LEQ);
+        }
+    } else {
+        TCGLabel *loop = gen_new_label();
+        TCGv_ptr t2, i = tcg_const_local_ptr(0);
+
+        gen_set_label(loop);
+
+        t2 = tcg_temp_new_ptr();
+        tcg_gen_add_ptr(t2, cpu_env, i);
+        tcg_gen_ld_i64(t0, t2, vofs);
+
+        /* Minimize the number of local temps that must be re-read from
+         * the stack each iteration.  Instead, re-compute values other
+         * than the loop counter.
+         */
+        tcg_gen_addi_ptr(t2, i, imm);
+        tcg_gen_extu_ptr_i64(addr, t2);
+        tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, rn));
+        tcg_temp_free_ptr(t2);
+
+        tcg_gen_qemu_st_i64(t0, addr, midx, MO_LEQ);
+
+        tcg_gen_addi_ptr(i, i, 8);
+
+        tcg_gen_brcondi_ptr(TCG_COND_LTU, i, len_align, loop);
+        tcg_temp_free_ptr(i);
+    }
+
+    /* Predicate register stores can be any multiple of 2.  */
+    if (len_remain) {
+        tcg_gen_ld_i64(t0, cpu_env, vofs + len_align);
+        tcg_gen_addi_i64(addr, cpu_reg_sp(s, rn), imm + len_align);
+
+        switch (len_remain) {
+        case 2:
+        case 4:
+        case 8:
+            tcg_gen_qemu_st_i64(t0, addr, midx, MO_LE | ctz32(len_remain));
+            break;
+
+        case 6:
+            tcg_gen_qemu_st_i64(t0, addr, midx, MO_LEUL);
+            tcg_gen_addi_i64(addr, addr, 4);
+            tcg_gen_shri_i64(t0, t0, 32);
+            tcg_gen_qemu_st_i64(t0, addr, midx, MO_LEUW);
+            break;
+
+        default:
+            g_assert_not_reached();
+        }
+    }
+    tcg_temp_free_i64(addr);
+    tcg_temp_free_i64(t0);
+}
+
 static bool trans_LDR_zri(DisasContext *s, arg_rri *a, uint32_t insn)
 {
     if (sve_access_check(s)) {
@@ -XXX,XX +XXX,XX @@ static bool trans_LDR_pri(DisasContext *s, arg_rri *a, uint32_t insn)
     return true;
 }
 
+static bool trans_STR_zri(DisasContext *s, arg_rri *a, uint32_t insn)
+{
+    if (sve_access_check(s)) {
+        int size = vec_full_reg_size(s);
+        int off = vec_full_reg_offset(s, a->rd);
+        do_str(s, off, size, a->rn, a->imm * size);
+    }
+    return true;
+}
+
+static bool trans_STR_pri(DisasContext *s, arg_rri *a, uint32_t insn)
+{
+    if (sve_access_check(s)) {
+        int size = pred_full_reg_size(s);
+        int off = pred_full_reg_offset(s, a->rd);
+        do_str(s, off, size, a->rn, a->imm * size);
+    }
+    return true;
+}
+
 /*
  *** SVE Memory - Contiguous Load Group
  */
diff --git a/target/arm/sve.decode b/target/arm/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve.decode
+++ b/target/arm/sve.decode
@@ -XXX,XX +XXX,XX @@ LD1RQ_zpri      1010010 .. 00 0.... 001 ... ..... ..... \
 
 ### SVE Memory Store Group
 
+# SVE store predicate register
+STR_pri         1110010 11 0.     ..... 000 ... ..... 0 ....    @pd_rn_i9
+
+# SVE store vector register
+STR_zri         1110010 11 0.     ..... 010 ... ..... .....     @rd_rn_i9
+
 # SVE contiguous store (scalar plus immediate)
 # ST1B, ST1H, ST1W, ST1D; require msz <= esz
 ST_zpri         1110010 .. esz:2  0.... 111 ... ..... ..... \
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    | 41 +++++++++++++++++++++
 target/arm/sve_helper.c    | 61 +++++++++++++++++++++++++++++++
 target/arm/translate-sve.c | 75 ++++++++++++++++++++++++++++++++++++++
 target/arm/sve.decode      | 39 ++++++++++++++++++++
 4 files changed, 216 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/translate-sve.c | 21 +++++++++++++++++++++
 target/arm/sve.decode      | 23 +++++++++++++++++++++++
 2 files changed, 44 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180627043328.11531-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    |  67 +++++++++++++++++++++++++
 target/arm/sve_helper.c    |  77 ++++++++++++++++++++++++++++
 target/arm/translate-sve.c | 100 +++++++++++++++++++++++++++++++++++++
 target/arm/sve.decode      |  57 +++++++++++++++++++++
 4 files changed, 301 insertions(+)

diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper-sve.h
+++ b/target/arm/helper-sve.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(sve_st1hd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
 
 DEF_HELPER_FLAGS_4(sve_st1sd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32)
 
+DEF_HELPER_FLAGS_6(sve_ldbsu_zsu, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldhsu_zsu, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldssu_zsu, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldbss_zsu, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldhss_zsu, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_6(sve_ldbsu_zss, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldhsu_zss, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldssu_zss, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldbss_zss, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldhss_zss, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_6(sve_ldbdu_zsu, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldhdu_zsu, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldsdu_zsu, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldddu_zsu, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldbds_zsu, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldhds_zsu, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldsds_zsu, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_6(sve_ldbdu_zss, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldhdu_zss, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldsdu_zss, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldddu_zss, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldbds_zss, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldhds_zss, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldsds_zss, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+
+DEF_HELPER_FLAGS_6(sve_ldbdu_zd, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldhdu_zd, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldsdu_zd, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldddu_zd, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldbds_zd, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldhds_zd, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+DEF_HELPER_FLAGS_6(sve_ldsds_zd, TCG_CALL_NO_WG,
+                   void, env, ptr, ptr, ptr, tl, i32)
+
 DEF_HELPER_FLAGS_6(sve_stbs_zsu, TCG_CALL_NO_WG,
                    void, env, ptr, ptr, ptr, tl, i32)
 DEF_HELPER_FLAGS_6(sve_sths_zsu, TCG_CALL_NO_WG,
diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve_helper.c
+++ b/target/arm/sve_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(sve_st4dd_r)(CPUARMState *env, void *vg,
     }
 }
 
+/* Loads with a vector index.  */
+
+#define DO_LD1_ZPZ_S(NAME, TYPEI, TYPEM, FN)                            \
+void HELPER(NAME)(CPUARMState *env, void *vd, void *vg, void *vm,       \
+                  target_ulong base, uint32_t desc)                     \
+{                                                                       \
+    intptr_t i, oprsz = simd_oprsz(desc);                               \
+    unsigned scale = simd_data(desc);                                   \
+    uintptr_t ra = GETPC();                                             \
+    for (i = 0; i < oprsz; i++) {                                       \
+        uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3));                 \
+        do {                                                            \
+            TYPEM m = 0;                                                \
+            if (pg & 1) {                                               \
+                target_ulong off = *(TYPEI *)(vm + H1_4(i));            \
+                m = FN(env, base + (off << scale), ra);                 \
+            }                                                           \
+            *(uint32_t *)(vd + H1_4(i)) = m;                            \
+            i += 4, pg >>= 4;                                           \
+        } while (i & 15);                                               \
+    }                                                                   \
+}
+
+#define DO_LD1_ZPZ_D(NAME, TYPEI, TYPEM, FN)                            \
+void HELPER(NAME)(CPUARMState *env, void *vd, void *vg, void *vm,       \
+                  target_ulong base, uint32_t desc)                     \
+{                                                                       \
+    intptr_t i, oprsz = simd_oprsz(desc) / 8;                           \
+    unsigned scale = simd_data(desc);                                   \
+    uintptr_t ra = GETPC();                                             \
+    uint64_t *d = vd, *m = vm; uint8_t *pg = vg;                        \
+    for (i = 0; i < oprsz; i++) {                                       \
+        TYPEM mm = 0;                                                   \
+        if (pg[H1(i)] & 1) {                                            \
+            target_ulong off = (TYPEI)m[i];                             \
+            mm = FN(env, base + (off << scale), ra);                    \
+        }                                                               \
+        d[i] = mm;                                                      \
+    }                                                                   \
+}
+
+DO_LD1_ZPZ_S(sve_ldbsu_zsu, uint32_t, uint8_t,  cpu_ldub_data_ra)
+DO_LD1_ZPZ_S(sve_ldhsu_zsu, uint32_t, uint16_t, cpu_lduw_data_ra)
+DO_LD1_ZPZ_S(sve_ldssu_zsu, uint32_t, uint32_t, cpu_ldl_data_ra)
+DO_LD1_ZPZ_S(sve_ldbss_zsu, uint32_t, int8_t,   cpu_ldub_data_ra)
+DO_LD1_ZPZ_S(sve_ldhss_zsu, uint32_t, int16_t,  cpu_lduw_data_ra)
+
+DO_LD1_ZPZ_S(sve_ldbsu_zss, int32_t, uint8_t,  cpu_ldub_data_ra)
+DO_LD1_ZPZ_S(sve_ldhsu_zss, int32_t, uint16_t, cpu_lduw_data_ra)
+DO_LD1_ZPZ_S(sve_ldssu_zss, int32_t, uint32_t, cpu_ldl_data_ra)
+DO_LD1_ZPZ_S(sve_ldbss_zss, int32_t, int8_t,   cpu_ldub_data_ra)
+DO_LD1_ZPZ_S(sve_ldhss_zss, int32_t, int16_t,  cpu_lduw_data_ra)
+
+DO_LD1_ZPZ_D(sve_ldbdu_zsu, uint32_t, uint8_t,  cpu_ldub_data_ra)
+DO_LD1_ZPZ_D(sve_ldhdu_zsu, uint32_t, uint16_t, cpu_lduw_data_ra)
+DO_LD1_ZPZ_D(sve_ldsdu_zsu, uint32_t, uint32_t, cpu_ldl_data_ra)
+DO_LD1_ZPZ_D(sve_ldddu_zsu, uint32_t, uint64_t, cpu_ldq_data_ra)
+DO_LD1_ZPZ_D(sve_ldbds_zsu, uint32_t, int8_t,   cpu_ldub_data_ra)
+DO_LD1_ZPZ_D(sve_ldhds_zsu, uint32_t, int16_t,  cpu_lduw_data_ra)
+DO_LD1_ZPZ_D(sve_ldsds_zsu, uint32_t, int32_t,  cpu_ldl_data_ra)
+
+DO_LD1_ZPZ_D(sve_ldbdu_zss, int32_t, uint8_t,  cpu_ldub_data_ra)
+DO_LD1_ZPZ_D(sve_ldhdu_zss, int32_t, uint16_t, cpu_lduw_data_ra)
+DO_LD1_ZPZ_D(sve_ldsdu_zss, int32_t, uint32_t, cpu_ldl_data_ra)
+DO_LD1_ZPZ_D(sve_ldddu_zss, int32_t, uint64_t, cpu_ldq_data_ra)
+DO_LD1_ZPZ_D(sve_ldbds_zss, int32_t, int8_t,   cpu_ldub_data_ra)
+DO_LD1_ZPZ_D(sve_ldhds_zss, int32_t, int16_t,  cpu_lduw_data_ra)
+DO_LD1_ZPZ_D(sve_ldsds_zss, int32_t, int32_t,  cpu_ldl_data_ra)
+
+DO_LD1_ZPZ_D(sve_ldbdu_zd, uint64_t, uint8_t,  cpu_ldub_data_ra)
+DO_LD1_ZPZ_D(sve_ldhdu_zd, uint64_t, uint16_t, cpu_lduw_data_ra)
+DO_LD1_ZPZ_D(sve_ldsdu_zd, uint64_t, uint32_t, cpu_ldl_data_ra)
+DO_LD1_ZPZ_D(sve_ldddu_zd, uint64_t, uint64_t, cpu_ldq_data_ra)
+DO_LD1_ZPZ_D(sve_ldbds_zd, uint64_t, int8_t,   cpu_ldub_data_ra)
+DO_LD1_ZPZ_D(sve_ldhds_zd, uint64_t, int16_t,  cpu_lduw_data_ra)
+DO_LD1_ZPZ_D(sve_ldsds_zd, uint64_t, int32_t,  cpu_ldl_data_ra)
+
 /* Stores with a vector index.  */
 
 #define DO_ST1_ZPZ_S(NAME, TYPEI, FN)                                   \
diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-sve.c
+++ b/target/arm/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static void do_mem_zpz(DisasContext *s, int zt, int pg, int zm, int scale,
     tcg_temp_free_i32(desc);
 }
 
+/* Indexed by [ff][xs][u][msz].  */
+static gen_helper_gvec_mem_scatter * const gather_load_fn32[2][2][2][3] = {
+    { { { gen_helper_sve_ldbss_zsu,
+          gen_helper_sve_ldhss_zsu,
+          NULL, },
+        { gen_helper_sve_ldbsu_zsu,
+          gen_helper_sve_ldhsu_zsu,
+          gen_helper_sve_ldssu_zsu, } },
+      { { gen_helper_sve_ldbss_zss,
+          gen_helper_sve_ldhss_zss,
+          NULL, },
+        { gen_helper_sve_ldbsu_zss,
+          gen_helper_sve_ldhsu_zss,
+          gen_helper_sve_ldssu_zss, } } },
+    /* TODO fill in first-fault handlers */
+};
+
+/* Note that we overload xs=2 to indicate 64-bit offset.  */
+static gen_helper_gvec_mem_scatter * const gather_load_fn64[2][3][2][4] = {
+    { { { gen_helper_sve_ldbds_zsu,
+          gen_helper_sve_ldhds_zsu,
+          gen_helper_sve_ldsds_zsu,
+          NULL, },
+        { gen_helper_sve_ldbdu_zsu,
+          gen_helper_sve_ldhdu_zsu,
+          gen_helper_sve_ldsdu_zsu,
+          gen_helper_sve_ldddu_zsu, } },
+      { { gen_helper_sve_ldbds_zss,
+          gen_helper_sve_ldhds_zss,
+          gen_helper_sve_ldsds_zss,
+          NULL, },
+        { gen_helper_sve_ldbdu_zss,
+          gen_helper_sve_ldhdu_zss,
+          gen_helper_sve_ldsdu_zss,
+          gen_helper_sve_ldddu_zss, } },
+      { { gen_helper_sve_ldbds_zd,
+          gen_helper_sve_ldhds_zd,
+          gen_helper_sve_ldsds_zd,
+          NULL, },
+        { gen_helper_sve_ldbdu_zd,
+          gen_helper_sve_ldhdu_zd,
+          gen_helper_sve_ldsdu_zd,
+          gen_helper_sve_ldddu_zd, } } },
+    /* TODO fill in first-fault handlers */
+};
+
+static bool trans_LD1_zprz(DisasContext *s, arg_LD1_zprz *a, uint32_t insn)
+{
+    gen_helper_gvec_mem_scatter *fn = NULL;
+
+    if (!sve_access_check(s)) {
+        return true;
+    }
+
+    switch (a->esz) {
+    case MO_32:
+        fn = gather_load_fn32[a->ff][a->xs][a->u][a->msz];
+        break;
+    case MO_64:
+        fn = gather_load_fn64[a->ff][a->xs][a->u][a->msz];
+        break;
+    }
+    assert(fn != NULL);
+
+    do_mem_zpz(s, a->rd, a->pg, a->rm, a->scale * a->msz,
+               cpu_reg_sp(s, a->rn), fn);
+    return true;
+}
+
+static bool trans_LD1_zpiz(DisasContext *s, arg_LD1_zpiz *a, uint32_t insn)
+{
+    gen_helper_gvec_mem_scatter *fn = NULL;
+    TCGv_i64 imm;
+
+    if (a->esz < a->msz || (a->esz == a->msz && !a->u)) {
+        return false;
+    }
+    if (!sve_access_check(s)) {
+        return true;
+    }
+
+    switch (a->esz) {
+    case MO_32:
+        fn = gather_load_fn32[a->ff][0][a->u][a->msz];
+        break;
+    case MO_64:
+        fn = gather_load_fn64[a->ff][2][a->u][a->msz];
+        break;
+    }
+    assert(fn != NULL);
+
+    /* Treat LD1_zpiz (zn[x] + imm) the same way as LD1_zprz (rn + zm[x])
+     * by loading the immediate into the scalar parameter.
+     */
+    imm = tcg_const_i64(a->imm << a->msz);
+    do_mem_zpz(s, a->rd, a->pg, a->rn, 0, imm, fn);
+    tcg_temp_free_i64(imm);
+    return true;
+}
+
 static bool trans_ST1_zprz(DisasContext *s, arg_ST1_zprz *a, uint32_t insn)
 {
     /* Indexed by [xs][msz].  */
diff --git a/target/arm/sve.decode b/target/arm/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve.decode
+++ b/target/arm/sve.decode
@@ -XXX,XX +XXX,XX @@
 &rpri_load      rd pg rn imm dtype nreg
 &rprr_store     rd pg rn rm msz esz nreg
 &rpri_store     rd pg rn imm msz esz nreg
+&rprr_gather_load       rd pg rn rm esz msz u ff xs scale
+&rpri_gather_load       rd pg rn imm esz msz u ff
 &rprr_scatter_store     rd pg rn rm esz msz xs scale
 
 ###########################################################################
@@ -XXX,XX +XXX,XX @@
 @rpri_load_msz  ....... .... . imm:s4 ... pg:3 rn:5 rd:5 \
                 &rpri_load dtype=%msz_dtype
 
+# Gather Loads.
+@rprr_g_load_u        ....... .. .    . rm:5 . u:1 ff:1 pg:3 rn:5 rd:5 \
+                      &rprr_gather_load xs=2
+@rprr_g_load_xs_u     ....... .. xs:1 . rm:5 . u:1 ff:1 pg:3 rn:5 rd:5 \
+                      &rprr_gather_load
+@rprr_g_load_xs_u_sc  ....... .. xs:1 scale:1 rm:5 . u:1 ff:1 pg:3 rn:5 rd:5 \
+                      &rprr_gather_load
+@rprr_g_load_xs_sc    ....... .. xs:1 scale:1 rm:5 . . ff:1 pg:3 rn:5 rd:5 \
+                      &rprr_gather_load
+@rprr_g_load_u_sc     ....... .. .    scale:1 rm:5 . u:1 ff:1 pg:3 rn:5 rd:5 \
+                      &rprr_gather_load xs=2
+@rprr_g_load_sc       ....... .. .    scale:1 rm:5 . . ff:1 pg:3 rn:5 rd:5 \
+                      &rprr_gather_load xs=2
+@rpri_g_load          ....... msz:2 .. imm:5 . u:1 ff:1 pg:3 rn:5 rd:5 \
+                      &rpri_gather_load
+
 # Stores; user must fill in ESZ, MSZ, NREG as needed.
 @rprr_store         ....... ..    ..     rm:5 ... pg:3 rn:5 rd:5    &rprr_store
 @rpri_store_msz     ....... msz:2 .. . imm:s4 ... pg:3 rn:5 rd:5    &rpri_store
@@ -XXX,XX +XXX,XX @@ LDR_zri         10000101 10 ...... 010 ... ..... .....          @rd_rn_i9
 LD1R_zpri       1000010 .. 1 imm:6 1.. pg:3 rn:5 rd:5 \
                 &rpri_load dtype=%dtype_23_13 nreg=0
 
+# SVE 32-bit gather load (scalar plus 32-bit unscaled offsets)
+# SVE 32-bit gather load (scalar plus 32-bit scaled offsets)
+LD1_zprz        1000010 00 .0 ..... 0.. ... ..... ..... \
+                @rprr_g_load_xs_u esz=2 msz=0 scale=0
+LD1_zprz        1000010 01 .. ..... 0.. ... ..... ..... \
+                @rprr_g_load_xs_u_sc esz=2 msz=1
+LD1_zprz        1000010 10 .. ..... 01. ... ..... ..... \
+                @rprr_g_load_xs_sc esz=2 msz=2 u=1
+
+# SVE 32-bit gather load (vector plus immediate)
+LD1_zpiz        1000010 .. 01 ..... 1.. ... ..... ..... \
+                @rpri_g_load esz=2
+
 ### SVE Memory Contiguous Load Group
 
 # SVE contiguous load (scalar plus scalar)
@@ -XXX,XX +XXX,XX @@ PRF_rr          1000010 -- 00 rm:5 110 --- ----- 0 ----
 
 ### SVE Memory 64-bit Gather Group
 
+# SVE 64-bit gather load (scalar plus 32-bit unpacked unscaled offsets)
+# SVE 64-bit gather load (scalar plus 32-bit unpacked scaled offsets)
+LD1_zprz        1100010 00 .0 ..... 0.. ... ..... ..... \
+                @rprr_g_load_xs_u esz=3 msz=0 scale=0
+LD1_zprz        1100010 01 .. ..... 0.. ... ..... ..... \
+                @rprr_g_load_xs_u_sc esz=3 msz=1
+LD1_zprz        1100010 10 .. ..... 0.. ... ..... ..... \
+                @rprr_g_load_xs_u_sc esz=3 msz=2
+LD1_zprz        1100010 11 .. ..... 01. ... ..... ..... \
+                @rprr_g_load_xs_sc esz=3 msz=3 u=1
+
+# SVE 64-bit gather load (scalar plus 64-bit unscaled offsets)
+# SVE 64-bit gather load (scalar plus 64-bit scaled offsets)
+LD1_zprz        1100010 00 10 ..... 1.. ... ..... ..... \
+                @rprr_g_load_u esz=3 msz=0 scale=0
+LD1_zprz        1100010 01 1. ..... 1.. ... ..... ..... \
+                @rprr_g_load_u_sc esz=3 msz=1
+LD1_zprz        1100010 10 1. ..... 1.. ... ..... ..... \
+                @rprr_g_load_u_sc esz=3 msz=2
+LD1_zprz        1100010 11 1. ..... 11. ... ..... ..... \
+                @rprr_g_load_sc esz=3 msz=3 u=1
+
+# SVE 64-bit gather load (vector plus immediate)
+LD1_zpiz        1100010 .. 01 ..... 1.. ... ..... ..... \
+                @rpri_g_load esz=3
+
 # SVE 64-bit gather prefetch (scalar plus 64-bit scaled offsets)
 PRF             1100010 00 11 ----- 1-- --- ----- 0 ----
 
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    | 67 +++++++++++++++++++++++++++++
 target/arm/sve_helper.c    | 88 ++++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c | 40 ++++++++++++++++-
 3 files changed, 193 insertions(+), 2 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/translate-sve.c | 85 ++++++++++++++++++++++++++------------
 target/arm/sve.decode      | 11 +++++
 2 files changed, 70 insertions(+), 26 deletions(-)

diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-sve.c
+++ b/target/arm/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static bool trans_LD1_zpiz(DisasContext *s, arg_LD1_zpiz *a, uint32_t insn)
     return true;
 }
 
+/* Indexed by [xs][msz].  */
+static gen_helper_gvec_mem_scatter * const scatter_store_fn32[2][3] = {
+    { gen_helper_sve_stbs_zsu,
+      gen_helper_sve_sths_zsu,
+      gen_helper_sve_stss_zsu, },
+    { gen_helper_sve_stbs_zss,
+      gen_helper_sve_sths_zss,
+      gen_helper_sve_stss_zss, },
+};
+
+/* Note that we overload xs=2 to indicate 64-bit offset.  */
+static gen_helper_gvec_mem_scatter * const scatter_store_fn64[3][4] = {
+    { gen_helper_sve_stbd_zsu,
+      gen_helper_sve_sthd_zsu,
+      gen_helper_sve_stsd_zsu,
+      gen_helper_sve_stdd_zsu, },
+    { gen_helper_sve_stbd_zss,
+      gen_helper_sve_sthd_zss,
+      gen_helper_sve_stsd_zss,
+      gen_helper_sve_stdd_zss, },
+    { gen_helper_sve_stbd_zd,
+      gen_helper_sve_sthd_zd,
+      gen_helper_sve_stsd_zd,
+      gen_helper_sve_stdd_zd, },
+};
+
 static bool trans_ST1_zprz(DisasContext *s, arg_ST1_zprz *a, uint32_t insn)
 {
-    /* Indexed by [xs][msz].  */
-    static gen_helper_gvec_mem_scatter * const fn32[2][3] = {
-        { gen_helper_sve_stbs_zsu,
-          gen_helper_sve_sths_zsu,
-          gen_helper_sve_stss_zsu, },
-        { gen_helper_sve_stbs_zss,
-          gen_helper_sve_sths_zss,
-          gen_helper_sve_stss_zss, },
-    };
-    /* Note that we overload xs=2 to indicate 64-bit offset.  */
-    static gen_helper_gvec_mem_scatter * const fn64[3][4] = {
-        { gen_helper_sve_stbd_zsu,
-          gen_helper_sve_sthd_zsu,
-          gen_helper_sve_stsd_zsu,
-          gen_helper_sve_stdd_zsu, },
-        { gen_helper_sve_stbd_zss,
-          gen_helper_sve_sthd_zss,
-          gen_helper_sve_stsd_zss,
-          gen_helper_sve_stdd_zss, },
-        { gen_helper_sve_stbd_zd,
-          gen_helper_sve_sthd_zd,
-          gen_helper_sve_stsd_zd,
-          gen_helper_sve_stdd_zd, },
-    };
     gen_helper_gvec_mem_scatter *fn;
 
     if (a->esz < a->msz || (a->msz == 0 && a->scale)) {
@@ -XXX,XX +XXX,XX @@ static bool trans_ST1_zprz(DisasContext *s, arg_ST1_zprz *a, uint32_t insn)
     }
     switch (a->esz) {
     case MO_32:
-        fn = fn32[a->xs][a->msz];
+        fn = scatter_store_fn32[a->xs][a->msz];
         break;
     case MO_64:
-        fn = fn64[a->xs][a->msz];
+        fn = scatter_store_fn64[a->xs][a->msz];
         break;
     default:
         g_assert_not_reached();
@@ -XXX,XX +XXX,XX @@ static bool trans_ST1_zprz(DisasContext *s, arg_ST1_zprz *a, uint32_t insn)
     return true;
 }
 
+static bool trans_ST1_zpiz(DisasContext *s, arg_ST1_zpiz *a, uint32_t insn)
+{
+    gen_helper_gvec_mem_scatter *fn = NULL;
+    TCGv_i64 imm;
+
+    if (a->esz < a->msz) {
+        return false;
+    }
+    if (!sve_access_check(s)) {
+        return true;
+    }
+
+    switch (a->esz) {
+    case MO_32:
+        fn = scatter_store_fn32[0][a->msz];
+        break;
+    case MO_64:
+        fn = scatter_store_fn64[2][a->msz];
+        break;
+    }
+    assert(fn != NULL);
+
+    /* Treat ST1_zpiz (zn[x] + imm) the same way as ST1_zprz (rn + zm[x])
+     * by loading the immediate into the scalar parameter.
+     */
+    imm = tcg_const_i64(a->imm << a->msz);
+    do_mem_zpz(s, a->rd, a->pg, a->rn, 0, imm, fn);
+    tcg_temp_free_i64(imm);
+    return true;
+}
+
 /*
  * Prefetches
  */
diff --git a/target/arm/sve.decode b/target/arm/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve.decode
+++ b/target/arm/sve.decode
@@ -XXX,XX +XXX,XX @@
 &rprr_gather_load       rd pg rn rm esz msz u ff xs scale
 &rpri_gather_load       rd pg rn imm esz msz u ff
 &rprr_scatter_store     rd pg rn rm esz msz xs scale
+&rpri_scatter_store     rd pg rn imm esz msz
 
 ###########################################################################
 # Named instruction formats.  These are generally used to
@@ -XXX,XX +XXX,XX @@
                     &rprr_store nreg=0
 @rprr_scatter_store ....... msz:2 ..     rm:5 ... pg:3 rn:5 rd:5 \
                     &rprr_scatter_store
+@rpri_scatter_store ....... msz:2 ..    imm:5 ... pg:3 rn:5 rd:5 \
+                    &rpri_scatter_store
 
 ###########################################################################
 # Instruction patterns.  Grouped according to the SVE encodingindex.xhtml.
@@ -XXX,XX +XXX,XX @@ ST1_zprz        1110010 .. 01 ..... 101 ... ..... ..... \
 ST1_zprz        1110010 .. 00 ..... 101 ... ..... ..... \
                 @rprr_scatter_store xs=2 esz=3 scale=0
 
+# SVE 64-bit scatter store (vector plus immediate)
+ST1_zpiz        1110010 .. 10 ..... 101 ... ..... ..... \
+                @rpri_scatter_store esz=3
+
+# SVE 32-bit scatter store (vector plus immediate)
+ST1_zpiz        1110010 .. 11 ..... 101 ... ..... ..... \
+                @rpri_scatter_store esz=2
+
 # SVE 64-bit scatter store (scalar plus unpacked 32-bit scaled offset)
 # Require msz > 0
 ST1_zprz        1110010 .. 01 ..... 100 ... ..... ..... \
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    | 49 ++++++++++++++++++++++++++++++
 target/arm/sve_helper.c    | 62 ++++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c | 40 ++++++++++++++++++++++++
 target/arm/sve.decode      | 11 +++++++
 4 files changed, 162 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    | 56 ++++++++++++++++++++++++++++
 target/arm/sve_helper.c    | 69 +++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c | 75 ++++++++++++++++++++++++++++++++++++++
 target/arm/sve.decode      | 14 +++++++
 4 files changed, 214 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.h        | 14 +++++++++++
 target/arm/translate-sve.c | 50 ++++++++++++++++++++++++++++++++++++++
 target/arm/vec_helper.c    | 48 ++++++++++++++++++++++++++++++++++++
 target/arm/sve.decode      | 19 +++++++++++++++
 4 files changed, 131 insertions(+)

diff --git a/target/arm/helper.h b/target/arm/helper.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.h
+++ b/target/arm/helper.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_ftsmul_s, TCG_CALL_NO_RWG,
 DEF_HELPER_FLAGS_5(gvec_ftsmul_d, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, i32)
 
+DEF_HELPER_FLAGS_5(gvec_fmul_idx_h, TCG_CALL_NO_RWG,
+                   void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(gvec_fmul_idx_s, TCG_CALL_NO_RWG,
+                   void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_5(gvec_fmul_idx_d, TCG_CALL_NO_RWG,
+                   void, ptr, ptr, ptr, ptr, i32)
+
+DEF_HELPER_FLAGS_6(gvec_fmla_idx_h, TCG_CALL_NO_RWG,
+                   void, ptr, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_6(gvec_fmla_idx_s, TCG_CALL_NO_RWG,
+                   void, ptr, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_6(gvec_fmla_idx_d, TCG_CALL_NO_RWG,
+                   void, ptr, ptr, ptr, ptr, ptr, i32)
+
 #ifdef TARGET_AARCH64
 #include "helper-a64.h"
 #include "helper-sve.h"
diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-sve.c
+++ b/target/arm/translate-sve.c
@@ -XXX,XX +XXX,XX @@ DO_ZZI(UMIN, umin)
 
 #undef DO_ZZI
 
+/*
+ *** SVE Floating Point Multiply-Add Indexed Group
+ */
+
+static bool trans_FMLA_zzxz(DisasContext *s, arg_FMLA_zzxz *a, uint32_t insn)
+{
+    static gen_helper_gvec_4_ptr * const fns[3] = {
+        gen_helper_gvec_fmla_idx_h,
+        gen_helper_gvec_fmla_idx_s,
+        gen_helper_gvec_fmla_idx_d,
+    };
+
+    if (sve_access_check(s)) {
+        unsigned vsz = vec_full_reg_size(s);
+        TCGv_ptr status = get_fpstatus_ptr(a->esz == MO_16);
+        tcg_gen_gvec_4_ptr(vec_full_reg_offset(s, a->rd),
+                           vec_full_reg_offset(s, a->rn),
+                           vec_full_reg_offset(s, a->rm),
+                           vec_full_reg_offset(s, a->ra),
+                           status, vsz, vsz, (a->index << 1) | a->sub,
+                           fns[a->esz - 1]);
+        tcg_temp_free_ptr(status);
+    }
+    return true;
+}
+
+/*
+ *** SVE Floating Point Multiply Indexed Group
+ */
+
+static bool trans_FMUL_zzx(DisasContext *s, arg_FMUL_zzx *a, uint32_t insn)
+{
+    static gen_helper_gvec_3_ptr * const fns[3] = {
+        gen_helper_gvec_fmul_idx_h,
+        gen_helper_gvec_fmul_idx_s,
+        gen_helper_gvec_fmul_idx_d,
+    };
+
+    if (sve_access_check(s)) {
+        unsigned vsz = vec_full_reg_size(s);
+        TCGv_ptr status = get_fpstatus_ptr(a->esz == MO_16);
+        tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, a->rd),
+                           vec_full_reg_offset(s, a->rn),
+                           vec_full_reg_offset(s, a->rm),
+                           status, vsz, vsz, a->index, fns[a->esz - 1]);
+        tcg_temp_free_ptr(status);
+    }
+    return true;
+}
+
 /*
  *** SVE Floating Point Accumulating Reduction Group
  */
diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/vec_helper.c
+++ b/target/arm/vec_helper.c
@@ -XXX,XX +XXX,XX @@ DO_3OP(gvec_rsqrts_d, helper_rsqrtsf_f64, float64)
 
 #endif
 #undef DO_3OP
+
+/* For the indexed ops, SVE applies the index per 128-bit vector segment.
+ * For AdvSIMD, there is of course only one such vector segment.
+ */
+
+#define DO_MUL_IDX(NAME, TYPE, H) \
+void HELPER(NAME)(void *vd, void *vn, void *vm, void *stat, uint32_t desc) \
+{                                                                          \
+    intptr_t i, j, oprsz = simd_oprsz(desc), segment = 16 / sizeof(TYPE);  \
+    intptr_t idx = simd_data(desc);                                        \
+    TYPE *d = vd, *n = vn, *m = vm;                                        \
+    for (i = 0; i < oprsz / sizeof(TYPE); i += segment) {                  \
+        TYPE mm = m[H(i + idx)];                                           \
+        for (j = 0; j < segment; j++) {                                    \
+            d[i + j] = TYPE##_mul(n[i + j], mm, stat);                     \
+        }                                                                  \
+    }                                                                      \
+}
+
+DO_MUL_IDX(gvec_fmul_idx_h, float16, H2)
+DO_MUL_IDX(gvec_fmul_idx_s, float32, H4)
+DO_MUL_IDX(gvec_fmul_idx_d, float64, )
+
+#undef DO_MUL_IDX
+
+#define DO_FMLA_IDX(NAME, TYPE, H)                                         \
+void HELPER(NAME)(void *vd, void *vn, void *vm, void *va,                  \
+                  void *stat, uint32_t desc)                               \
+{                                                                          \
+    intptr_t i, j, oprsz = simd_oprsz(desc), segment = 16 / sizeof(TYPE);  \
+    TYPE op1_neg = extract32(desc, SIMD_DATA_SHIFT, 1);                    \
+    intptr_t idx = desc >> (SIMD_DATA_SHIFT + 1);                          \
+    TYPE *d = vd, *n = vn, *m = vm, *a = va;                               \
+    op1_neg <<= (8 * sizeof(TYPE) - 1);                                    \
+    for (i = 0; i < oprsz / sizeof(TYPE); i += segment) {                  \
+        TYPE mm = m[H(i + idx)];                                           \
+        for (j = 0; j < segment; j++) {                                    \
+            d[i + j] = TYPE##_muladd(n[i + j] ^ op1_neg,                   \
+                                     mm, a[i + j], 0, stat);               \
+        }                                                                  \
+    }                                                                      \
+}
+
+DO_FMLA_IDX(gvec_fmla_idx_h, float16, H2)
+DO_FMLA_IDX(gvec_fmla_idx_s, float32, H4)
+DO_FMLA_IDX(gvec_fmla_idx_d, float64, )
+
+#undef DO_FMLA_IDX
diff --git a/target/arm/sve.decode b/target/arm/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve.decode
+++ b/target/arm/sve.decode
@@ -XXX,XX +XXX,XX @@
 %imm9_16_10     16:s6 10:3
 %size_23        23:2
 %dtype_23_13    23:2 13:2
+%index3_22_19   22:1 19:2
 
 # A combination of tsz:imm3 -- extract esize.
 %tszimm_esz     22:2 5:5 !function=tszimm_esz
@@ -XXX,XX +XXX,XX @@ UMIN_zzi        00100101 .. 101 011 110 ........ .....          @rdn_i8u
 # SVE integer multiply immediate (unpredicated)
 MUL_zzi         00100101 .. 110 000 110 ........ .....          @rdn_i8s
 
+### SVE FP Multiply-Add Indexed Group
+
+# SVE floating-point multiply-add (indexed)
+FMLA_zzxz       01100100 0.1 .. rm:3 00000 sub:1 rn:5 rd:5 \
+                ra=%reg_movprfx index=%index3_22_19 esz=1
+FMLA_zzxz       01100100 101 index:2 rm:3 00000 sub:1 rn:5 rd:5 \
+                ra=%reg_movprfx esz=2
+FMLA_zzxz       01100100 111 index:1 rm:4 00000 sub:1 rn:5 rd:5 \
+                ra=%reg_movprfx esz=3
+
+### SVE FP Multiply Indexed Group
+
+# SVE floating-point multiply (indexed)
+FMUL_zzx        01100100 0.1 .. rm:3 001000 rn:5 rd:5 \
+                index=%index3_22_19 esz=1
+FMUL_zzx        01100100 101 index:2 rm:3 001000 rn:5 rd:5      esz=2
+FMUL_zzx        01100100 111 index:1 rm:4 001000 rn:5 rd:5      esz=3
+
 ### SVE FP Accumulating Reduction Group
 
 # SVE floating-point serial reduction (predicated)
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    | 35 ++++++++++++++++++++++
 target/arm/sve_helper.c    | 61 ++++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c | 57 +++++++++++++++++++++++++++++++++++
 target/arm/sve.decode      |  8 +++++
 4 files changed, 161 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.h        |  8 +++++++
 target/arm/translate-sve.c | 47 ++++++++++++++++++++++++++++++++++++++
 target/arm/vec_helper.c    | 20 ++++++++++++++++
 target/arm/sve.decode      |  5 ++++
 4 files changed, 80 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    | 42 +++++++++++++++++++++++++++++++++++++
 target/arm/sve_helper.c    | 43 ++++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c | 43 ++++++++++++++++++++++++++++++++++++++
 target/arm/sve.decode      | 10 +++++++++
 4 files changed, 138 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    |  4 +++
 target/arm/sve_helper.c    | 70 ++++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c | 27 +++++++++++++++
 target/arm/sve.decode      |  3 ++
 4 files changed, 104 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    | 13 +++++++++
 target/arm/sve_helper.c    | 55 ++++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c | 30 +++++++++++++++++++++
 target/arm/sve.decode      |  8 ++++++
 4 files changed, 106 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    | 30 +++++++++++++
 target/arm/helper.h        | 12 +++---
 target/arm/helper.c        |  2 +-
 target/arm/sve_helper.c    | 88 ++++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c | 70 ++++++++++++++++++++++++++++++
 target/arm/sve.decode      | 16 +++++++
 6 files changed, 211 insertions(+), 7 deletions(-)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    | 14 +++++++
 target/arm/sve_helper.c    |  8 ++++
 target/arm/translate-sve.c | 77 ++++++++++++++++++++++++++++++++++++++
 target/arm/sve.decode      |  9 +++++
 4 files changed, 108 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    | 14 ++++++++++++++
 target/arm/sve_helper.c    |  8 ++++++++
 target/arm/translate-sve.c | 26 ++++++++++++++++++++++++++
 target/arm/sve.decode      |  4 ++++
 4 files changed, 52 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/translate-sve.c | 60 +++++++++++++++++++++++++++++++++++++-
 target/arm/sve.decode      |  7 +++++
 2 files changed, 66 insertions(+), 1 deletion(-)

diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-sve.c
+++ b/target/arm/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static bool do_zpzz_ool(DisasContext *s, arg_rprr_esz *a, gen_helper_gvec_4 *fn)
     return true;
 }
 
+/* Select active elememnts from Zn and inactive elements from Zm,
+ * storing the result in Zd.
+ */
+static void do_sel_z(DisasContext *s, int rd, int rn, int rm, int pg, int esz)
+{
+    static gen_helper_gvec_4 * const fns[4] = {
+        gen_helper_sve_sel_zpzz_b, gen_helper_sve_sel_zpzz_h,
+        gen_helper_sve_sel_zpzz_s, gen_helper_sve_sel_zpzz_d
+    };
+    unsigned vsz = vec_full_reg_size(s);
+    tcg_gen_gvec_4_ool(vec_full_reg_offset(s, rd),
+                       vec_full_reg_offset(s, rn),
+                       vec_full_reg_offset(s, rm),
+                       pred_full_reg_offset(s, pg),
+                       vsz, vsz, 0, fns[esz]);
+}
+
 #define DO_ZPZZ(NAME, name) \
 static bool trans_##NAME##_zpzz(DisasContext *s, arg_rprr_esz *a,         \
                                 uint32_t insn)                            \
@@ -XXX,XX +XXX,XX @@ static bool trans_UDIV_zpzz(DisasContext *s, arg_rprr_esz *a, uint32_t insn)
     return do_zpzz_ool(s, a, fns[a->esz]);
 }
 
-DO_ZPZZ(SEL, sel)
+static bool trans_SEL_zpzz(DisasContext *s, arg_rprr_esz *a, uint32_t insn)
+{
+    if (sve_access_check(s)) {
+        do_sel_z(s, a->rd, a->rn, a->rm, a->pg, a->esz);
+    }
+    return true;
+}
 
 #undef DO_ZPZZ
 
@@ -XXX,XX +XXX,XX @@ static bool trans_PRF_rr(DisasContext *s, arg_PRF_rr *a, uint32_t insn)
     sve_access_check(s);
     return true;
 }
+
+/*
+ * Move Prefix
+ *
+ * TODO: The implementation so far could handle predicated merging movprfx.
+ * The helper functions as written take an extra source register to
+ * use in the operation, but the result is only written when predication
+ * succeeds.  For unpredicated movprfx, we need to rearrange the helpers
+ * to allow the final write back to the destination to be unconditional.
+ * For predicated zeroing movprfx, we need to rearrange the helpers to
+ * allow the final write back to zero inactives.
+ *
+ * In the meantime, just emit the moves.
+ */
+
+static bool trans_MOVPRFX(DisasContext *s, arg_MOVPRFX *a, uint32_t insn)
+{
+    return do_mov_z(s, a->rd, a->rn);
+}
+
+static bool trans_MOVPRFX_m(DisasContext *s, arg_rpr_esz *a, uint32_t insn)
+{
+    if (sve_access_check(s)) {
+        do_sel_z(s, a->rd, a->rn, a->rd, a->pg, a->esz);
+    }
+    return true;
+}
+
+static bool trans_MOVPRFX_z(DisasContext *s, arg_rpr_esz *a, uint32_t insn)
+{
+    if (sve_access_check(s)) {
+        do_movz_zpz(s, a->rd, a->rn, a->pg, a->esz);
+    }
+    return true;
+}
diff --git a/target/arm/sve.decode b/target/arm/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve.decode
+++ b/target/arm/sve.decode
@@ -XXX,XX +XXX,XX @@ ORV             00000100 .. 011 000 001 ... ..... .....         @rd_pg_rn
 EORV            00000100 .. 011 001 001 ... ..... .....         @rd_pg_rn
 ANDV            00000100 .. 011 010 001 ... ..... .....         @rd_pg_rn
 
+# SVE constructive prefix (predicated)
+MOVPRFX_z       00000100 .. 010 000 001 ... ..... .....         @rd_pg_rn
+MOVPRFX_m       00000100 .. 010 001 001 ... ..... .....         @rd_pg_rn
+
 # SVE integer add reduction (predicated)
 # Note that saddv requires size != 3.
 UADDV           00000100 .. 000 001 001 ... ..... .....         @rd_pg_rn
@@ -XXX,XX +XXX,XX @@ ADR_p64         00000100 11 1 ..... 1010 .. ..... .....         @rd_rn_msz_rm
 
 ### SVE Integer Misc - Unpredicated Group
 
+# SVE constructive prefix (unpredicated)
+MOVPRFX         00000100 00 1 00000 101111 rn:5 rd:5
+
 # SVE floating-point exponential accelerator
 # Note esz != 0
 FEXPA           00000100 .. 1 00000 101110 ..... .....          @rd_rn
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    |   7 +++
 target/arm/sve_helper.c    | 100 +++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c |  24 +++++++++
 target/arm/sve.decode      |   4 ++
 4 files changed, 135 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-sve.h    |   4 +
 target/arm/sve_helper.c    | 162 +++++++++++++++++++++++++++++++++++++
 target/arm/translate-sve.c |  37 +++++++++
 target/arm/sve.decode      |   4 +
 4 files changed, 207 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

For aa64 advsimd, we had been passing the pre-indexed vector.
However, sve applies the index to each 128-bit segment, so we
need to pass in the index separately.

For aa32 advsimd, the fp32 operation always has index 0, but
we failed to interpret the fp16 index correctly.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180627043328.11531-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/translate-a64.c | 21 ++++++++++++---------
 target/arm/translate.c     | 32 +++++++++++++++++++++++---------
 target/arm/vec_helper.c    | 10 ++++++----
 3 files changed, 41 insertions(+), 22 deletions(-)

diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn)
     case 0x13: /* FCMLA #90 */
     case 0x15: /* FCMLA #180 */
     case 0x17: /* FCMLA #270 */
-        tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd),
-                           vec_full_reg_offset(s, rn),
-                           vec_reg_offset(s, rm, index, size), fpst,
-                           is_q ? 16 : 8, vec_full_reg_size(s),
-                           extract32(insn, 13, 2), /* rot */
-                           size == MO_64
-                           ? gen_helper_gvec_fcmlas_idx
-                           : gen_helper_gvec_fcmlah_idx);
-        tcg_temp_free_ptr(fpst);
+        {
+            int rot = extract32(insn, 13, 2);
+            int data = (index << 2) | rot;
+            tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd),
+                               vec_full_reg_offset(s, rn),
+                               vec_full_reg_offset(s, rm), fpst,
+                               is_q ? 16 : 8, vec_full_reg_size(s), data,
+                               size == MO_64
+                               ? gen_helper_gvec_fcmlas_idx
+                               : gen_helper_gvec_fcmlah_idx);
+            tcg_temp_free_ptr(fpst);
+        }
         return;
     }
 
diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn)
 
 static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn)
 {
-    int rd, rn, rm, rot, size, opr_sz;
+    gen_helper_gvec_3_ptr *fn_gvec_ptr;
+    int rd, rn, rm, opr_sz, data;
     TCGv_ptr fpst;
     bool q;
 
     q = extract32(insn, 6, 1);
     VFP_DREG_D(rd, insn);
     VFP_DREG_N(rn, insn);
-    VFP_DREG_M(rm, insn);
     if ((rd | rn) & q) {
         return 1;
     }
 
     if ((insn & 0xff000f10) == 0xfe000800) {
         /* VCMLA (indexed) -- 1111 1110 S.RR .... .... 1000 ...0 .... */
-        rot = extract32(insn, 20, 2);
-        size = extract32(insn, 23, 1);
-        if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA)
-            || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) {
+        int rot = extract32(insn, 20, 2);
+        int size = extract32(insn, 23, 1);
+        int index;
+
+        if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA)) {
             return 1;
         }
+        if (size == 0) {
+            if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) {
+                return 1;
+            }
+            /* For fp16, rm is just Vm, and index is M.  */
+            rm = extract32(insn, 0, 4);
+            index = extract32(insn, 5, 1);
+        } else {
+            /* For fp32, rm is the usual M:Vm, and index is 0.  */
+            VFP_DREG_M(rm, insn);
+            index = 0;
+        }
+        data = (index << 2) | rot;
+        fn_gvec_ptr = (size ? gen_helper_gvec_fcmlas_idx
+                       : gen_helper_gvec_fcmlah_idx);
     } else {
         return 1;
     }
@@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn)
     tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd),
                        vfp_reg_offset(1, rn),
                        vfp_reg_offset(1, rm), fpst,
-                       opr_sz, opr_sz, rot,
-                       size ? gen_helper_gvec_fcmlas_idx
-                       : gen_helper_gvec_fcmlah_idx);
+                       opr_sz, opr_sz, data, fn_gvec_ptr);
     tcg_temp_free_ptr(fpst);
     return 0;
 }
diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/vec_helper.c
+++ b/target/arm/vec_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(gvec_fcmlah_idx)(void *vd, void *vn, void *vm,
     float_status *fpst = vfpst;
     intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1);
     uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1);
+    intptr_t index = extract32(desc, SIMD_DATA_SHIFT + 2, 2);
     uint32_t neg_real = flip ^ neg_imag;
     uintptr_t i;
-    float16 e1 = m[H2(flip)];
-    float16 e3 = m[H2(1 - flip)];
+    float16 e1 = m[H2(2 * index + flip)];
+    float16 e3 = m[H2(2 * index + 1 - flip)];
 
     /* Shift boolean to the sign bit so we can xor to negate.  */
     neg_real <<= 15;
@@ -XXX,XX +XXX,XX @@ void HELPER(gvec_fcmlas_idx)(void *vd, void *vn, void *vm,
     float_status *fpst = vfpst;
     intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1);
     uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1);
+    intptr_t index = extract32(desc, SIMD_DATA_SHIFT + 2, 2);
     uint32_t neg_real = flip ^ neg_imag;
     uintptr_t i;
-    float32 e1 = m[H4(flip)];
-    float32 e3 = m[H4(1 - flip)];
+    float32 e1 = m[H4(2 * index + flip)];
+    float32 e3 = m[H4(2 * index + 1 - flip)];
 
     /* Shift boolean to the sign bit so we can xor to negate.  */
     neg_real <<= 31;
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

Enhance the existing helpers to support SVE, which takes the
index from each 128-bit segment.  The change has no effect
for AdvSIMD, since there is only one such segment.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180627043328.11531-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/translate-sve.c | 23 ++++++++++++++++++
 target/arm/vec_helper.c    | 50 +++++++++++++++++++++++---------------
 target/arm/sve.decode      |  6 +++++
 3 files changed, 59 insertions(+), 20 deletions(-)

diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-sve.c
+++ b/target/arm/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static bool trans_FCMLA_zpzzz(DisasContext *s,
     return true;
 }
 
+static bool trans_FCMLA_zzxz(DisasContext *s, arg_FCMLA_zzxz *a, uint32_t insn)
+{
+    static gen_helper_gvec_3_ptr * const fns[2] = {
+        gen_helper_gvec_fcmlah_idx,
+        gen_helper_gvec_fcmlas_idx,
+    };
+
+    tcg_debug_assert(a->esz == 1 || a->esz == 2);
+    tcg_debug_assert(a->rd == a->ra);
+    if (sve_access_check(s)) {
+        unsigned vsz = vec_full_reg_size(s);
+        TCGv_ptr status = get_fpstatus_ptr(a->esz == MO_16);
+        tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, a->rd),
+                           vec_full_reg_offset(s, a->rn),
+                           vec_full_reg_offset(s, a->rm),
+                           status, vsz, vsz,
+                           a->index * 4 + a->rot,
+                           fns[a->esz - 1]);
+        tcg_temp_free_ptr(status);
+    }
+    return true;
+}
+
 /*
  *** SVE Floating Point Unary Operations Predicated Group
  */
diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/vec_helper.c
+++ b/target/arm/vec_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(gvec_fcmlah_idx)(void *vd, void *vn, void *vm,
     uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1);
     intptr_t index = extract32(desc, SIMD_DATA_SHIFT + 2, 2);
     uint32_t neg_real = flip ^ neg_imag;
-    uintptr_t i;
-    float16 e1 = m[H2(2 * index + flip)];
-    float16 e3 = m[H2(2 * index + 1 - flip)];
+    intptr_t elements = opr_sz / sizeof(float16);
+    intptr_t eltspersegment = 16 / sizeof(float16);
+    intptr_t i, j;
 
     /* Shift boolean to the sign bit so we can xor to negate.  */
     neg_real <<= 15;
     neg_imag <<= 15;
-    e1 ^= neg_real;
-    e3 ^= neg_imag;
 
-    for (i = 0; i < opr_sz / 2; i += 2) {
-        float16 e2 = n[H2(i + flip)];
-        float16 e4 = e2;
+    for (i = 0; i < elements; i += eltspersegment) {
+        float16 mr = m[H2(i + 2 * index + 0)];
+        float16 mi = m[H2(i + 2 * index + 1)];
+        float16 e1 = neg_real ^ (flip ? mi : mr);
+        float16 e3 = neg_imag ^ (flip ? mr : mi);
 
-        d[H2(i)] = float16_muladd(e2, e1, d[H2(i)], 0, fpst);
-        d[H2(i + 1)] = float16_muladd(e4, e3, d[H2(i + 1)], 0, fpst);
+        for (j = i; j < i + eltspersegment; j += 2) {
+            float16 e2 = n[H2(j + flip)];
+            float16 e4 = e2;
+
+            d[H2(j)] = float16_muladd(e2, e1, d[H2(j)], 0, fpst);
+            d[H2(j + 1)] = float16_muladd(e4, e3, d[H2(j + 1)], 0, fpst);
+        }
     }
     clear_tail(d, opr_sz, simd_maxsz(desc));
 }
@@ -XXX,XX +XXX,XX @@ void HELPER(gvec_fcmlas_idx)(void *vd, void *vn, void *vm,
     uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1);
     intptr_t index = extract32(desc, SIMD_DATA_SHIFT + 2, 2);
     uint32_t neg_real = flip ^ neg_imag;
-    uintptr_t i;
-    float32 e1 = m[H4(2 * index + flip)];
-    float32 e3 = m[H4(2 * index + 1 - flip)];
+    intptr_t elements = opr_sz / sizeof(float32);
+    intptr_t eltspersegment = 16 / sizeof(float32);
+    intptr_t i, j;
 
     /* Shift boolean to the sign bit so we can xor to negate.  */
     neg_real <<= 31;
     neg_imag <<= 31;
-    e1 ^= neg_real;
-    e3 ^= neg_imag;
 
-    for (i = 0; i < opr_sz / 4; i += 2) {
-        float32 e2 = n[H4(i + flip)];
-        float32 e4 = e2;
+    for (i = 0; i < elements; i += eltspersegment) {
+        float32 mr = m[H4(i + 2 * index + 0)];
+        float32 mi = m[H4(i + 2 * index + 1)];
+        float32 e1 = neg_real ^ (flip ? mi : mr);
+        float32 e3 = neg_imag ^ (flip ? mr : mi);
 
-        d[H4(i)] = float32_muladd(e2, e1, d[H4(i)], 0, fpst);
-        d[H4(i + 1)] = float32_muladd(e4, e3, d[H4(i + 1)], 0, fpst);
+        for (j = i; j < i + eltspersegment; j += 2) {
+            float32 e2 = n[H4(j + flip)];
+            float32 e4 = e2;
+
+            d[H4(j)] = float32_muladd(e2, e1, d[H4(j)], 0, fpst);
+            d[H4(j + 1)] = float32_muladd(e4, e3, d[H4(j + 1)], 0, fpst);
+        }
     }
     clear_tail(d, opr_sz, simd_maxsz(desc));
 }
diff --git a/target/arm/sve.decode b/target/arm/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve.decode
+++ b/target/arm/sve.decode
@@ -XXX,XX +XXX,XX @@ FCADD           01100100 esz:2 00000 rot:1 100 pg:3 rm:5 rd:5 \
 FCMLA_zpzzz     01100100 esz:2 0 rm:5 0 rot:2 pg:3 rn:5 rd:5 \
                 ra=%reg_movprfx
 
+# SVE floating-point complex multiply-add (indexed)
+FCMLA_zzxz      01100100 10 1 index:2 rm:3 0001 rot:2 rn:5 rd:5 \
+                ra=%reg_movprfx esz=1
+FCMLA_zzxz      01100100 11 1 index:1 rm:4 0001 rot:2 rn:5 rd:5 \
+                ra=%reg_movprfx esz=2
+
 ### SVE FP Multiply-Add Indexed Group
 
 # SVE floating-point multiply-add (indexed)
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-33-richard.henderson@linaro.org
[PMM: moved 'ra=%reg_movprfx' here from following patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.h        |  5 +++
 target/arm/translate-sve.c | 17 ++++++++++
 target/arm/vec_helper.c    | 67 ++++++++++++++++++++++++++++++++++++++
 target/arm/sve.decode      |  3 ++
 4 files changed, 92 insertions(+)

From: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180627043328.11531-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.h        |   5 ++
 target/arm/translate-sve.c |  18 ++++++
 target/arm/vec_helper.c    | 124 +++++++++++++++++++++++++++++++++++++
 target/arm/sve.decode      |   6 ++
 4 files changed, 153 insertions(+)

diff --git a/target/arm/helper.h b/target/arm/helper.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.h
+++ b/target/arm/helper.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(gvec_udot_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
 DEF_HELPER_FLAGS_4(gvec_sdot_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
 DEF_HELPER_FLAGS_4(gvec_udot_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
 
+DEF_HELPER_FLAGS_4(gvec_sdot_idx_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_4(gvec_udot_idx_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_4(gvec_sdot_idx_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_4(gvec_udot_idx_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
+
 DEF_HELPER_FLAGS_5(gvec_fcaddh, TCG_CALL_NO_RWG,
                    void, ptr, ptr, ptr, ptr, i32)
 DEF_HELPER_FLAGS_5(gvec_fcadds, TCG_CALL_NO_RWG,
diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-sve.c
+++ b/target/arm/translate-sve.c
@@ -XXX,XX +XXX,XX @@ static bool trans_DOT_zzz(DisasContext *s, arg_DOT_zzz *a, uint32_t insn)
     return true;
 }
 
+static bool trans_DOT_zzx(DisasContext *s, arg_DOT_zzx *a, uint32_t insn)
+{
+    static gen_helper_gvec_3 * const fns[2][2] = {
+        { gen_helper_gvec_sdot_idx_b, gen_helper_gvec_sdot_idx_h },
+        { gen_helper_gvec_udot_idx_b, gen_helper_gvec_udot_idx_h }
+    };
+
+    if (sve_access_check(s)) {
+        unsigned vsz = vec_full_reg_size(s);
+        tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd),
+                           vec_full_reg_offset(s, a->rn),
+                           vec_full_reg_offset(s, a->rm),
+                           vsz, vsz, a->index, fns[a->u][a->sz]);
+    }
+    return true;
+}
+
+
 /*
  *** SVE Floating Point Multiply-Add Indexed Group
  */
diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/vec_helper.c
+++ b/target/arm/vec_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(gvec_udot_h)(void *vd, void *vn, void *vm, uint32_t desc)
     clear_tail(d, opr_sz, simd_maxsz(desc));
 }
 
+void HELPER(gvec_sdot_idx_b)(void *vd, void *vn, void *vm, uint32_t desc)
+{
+    intptr_t i, segend, opr_sz = simd_oprsz(desc), opr_sz_4 = opr_sz / 4;
+    intptr_t index = simd_data(desc);
+    uint32_t *d = vd;
+    int8_t *n = vn;
+    int8_t *m_indexed = (int8_t *)vm + index * 4;
+
+    /* Notice the special case of opr_sz == 8, from aa64/aa32 advsimd.
+     * Otherwise opr_sz is a multiple of 16.
+     */
+    segend = MIN(4, opr_sz_4);
+    i = 0;
+    do {
+        int8_t m0 = m_indexed[i * 4 + 0];
+        int8_t m1 = m_indexed[i * 4 + 1];
+        int8_t m2 = m_indexed[i * 4 + 2];
+        int8_t m3 = m_indexed[i * 4 + 3];
+
+        do {
+            d[i] += n[i * 4 + 0] * m0
+                  + n[i * 4 + 1] * m1
+                  + n[i * 4 + 2] * m2
+                  + n[i * 4 + 3] * m3;
+        } while (++i < segend);
+        segend = i + 4;
+    } while (i < opr_sz_4);
+
+    clear_tail(d, opr_sz, simd_maxsz(desc));
+}
+
+void HELPER(gvec_udot_idx_b)(void *vd, void *vn, void *vm, uint32_t desc)
+{
+    intptr_t i, segend, opr_sz = simd_oprsz(desc), opr_sz_4 = opr_sz / 4;
+    intptr_t index = simd_data(desc);
+    uint32_t *d = vd;
+    uint8_t *n = vn;
+    uint8_t *m_indexed = (uint8_t *)vm + index * 4;
+
+    /* Notice the special case of opr_sz == 8, from aa64/aa32 advsimd.
+     * Otherwise opr_sz is a multiple of 16.
+     */
+    segend = MIN(4, opr_sz_4);
+    i = 0;
+    do {
+        uint8_t m0 = m_indexed[i * 4 + 0];
+        uint8_t m1 = m_indexed[i * 4 + 1];
+        uint8_t m2 = m_indexed[i * 4 + 2];
+        uint8_t m3 = m_indexed[i * 4 + 3];
+
+        do {
+            d[i] += n[i * 4 + 0] * m0
+                  + n[i * 4 + 1] * m1
+                  + n[i * 4 + 2] * m2
+                  + n[i * 4 + 3] * m3;
+        } while (++i < segend);
+        segend = i + 4;
+    } while (i < opr_sz_4);
+
+    clear_tail(d, opr_sz, simd_maxsz(desc));
+}
+
+void HELPER(gvec_sdot_idx_h)(void *vd, void *vn, void *vm, uint32_t desc)
+{
+    intptr_t i, opr_sz = simd_oprsz(desc), opr_sz_8 = opr_sz / 8;
+    intptr_t index = simd_data(desc);
+    uint64_t *d = vd;
+    int16_t *n = vn;
+    int16_t *m_indexed = (int16_t *)vm + index * 4;
+
+    /* This is supported by SVE only, so opr_sz is always a multiple of 16.
+     * Process the entire segment all at once, writing back the results
+     * only after we've consumed all of the inputs.
+     */
+    for (i = 0; i < opr_sz_8 ; i += 2) {
+        uint64_t d0, d1;
+
+        d0  = n[i * 4 + 0] * (int64_t)m_indexed[i * 4 + 0];
+        d0 += n[i * 4 + 1] * (int64_t)m_indexed[i * 4 + 1];
+        d0 += n[i * 4 + 2] * (int64_t)m_indexed[i * 4 + 2];
+        d0 += n[i * 4 + 3] * (int64_t)m_indexed[i * 4 + 3];
+        d1  = n[i * 4 + 4] * (int64_t)m_indexed[i * 4 + 0];
+        d1 += n[i * 4 + 5] * (int64_t)m_indexed[i * 4 + 1];
+        d1 += n[i * 4 + 6] * (int64_t)m_indexed[i * 4 + 2];
+        d1 += n[i * 4 + 7] * (int64_t)m_indexed[i * 4 + 3];
+
+        d[i + 0] += d0;
+        d[i + 1] += d1;
+    }
+
+    clear_tail(d, opr_sz, simd_maxsz(desc));
+}
+
+void HELPER(gvec_udot_idx_h)(void *vd, void *vn, void *vm, uint32_t desc)
+{
+    intptr_t i, opr_sz = simd_oprsz(desc), opr_sz_8 = opr_sz / 8;
+    intptr_t index = simd_data(desc);
+    uint64_t *d = vd;
+    uint16_t *n = vn;
+    uint16_t *m_indexed = (uint16_t *)vm + index * 4;
+
+    /* This is supported by SVE only, so opr_sz is always a multiple of 16.
+     * Process the entire segment all at once, writing back the results
+     * only after we've consumed all of the inputs.
+     */
+    for (i = 0; i < opr_sz_8 ; i += 2) {
+        uint64_t d0, d1;
+
+        d0  = n[i * 4 + 0] * (uint64_t)m_indexed[i * 4 + 0];
+        d0 += n[i * 4 + 1] * (uint64_t)m_indexed[i * 4 + 1];
+        d0 += n[i * 4 + 2] * (uint64_t)m_indexed[i * 4 + 2];
+        d0 += n[i * 4 + 3] * (uint64_t)m_indexed[i * 4 + 3];
+        d1  = n[i * 4 + 4] * (uint64_t)m_indexed[i * 4 + 0];
+        d1 += n[i * 4 + 5] * (uint64_t)m_indexed[i * 4 + 1];
+        d1 += n[i * 4 + 6] * (uint64_t)m_indexed[i * 4 + 2];
+        d1 += n[i * 4 + 7] * (uint64_t)m_indexed[i * 4 + 3];
+
+        d[i + 0] += d0;
+        d[i + 1] += d1;
+    }
+
+    clear_tail(d, opr_sz, simd_maxsz(desc));
+}
+
 void HELPER(gvec_fcaddh)(void *vd, void *vn, void *vm,
                          void *vfpst, uint32_t desc)
 {
diff --git a/target/arm/sve.decode b/target/arm/sve.decode
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve.decode
+++ b/target/arm/sve.decode
@@ -XXX,XX +XXX,XX @@ MUL_zzi         00100101 .. 110 000 110 ........ .....          @rdn_i8s
 # SVE integer dot product (unpredicated)
 DOT_zzz         01000100 1 sz:1 0 rm:5 00000 u:1 rn:5 rd:5      ra=%reg_movprfx
 
+# SVE integer dot product (indexed)
+DOT_zzx         01000100 101 index:2 rm:3 00000 u:1 rn:5 rd:5 \
+                sz=0 ra=%reg_movprfx
+DOT_zzx         01000100 111 index:1 rm:4 00000 u:1 rn:5 rd:5 \
+                sz=1 ra=%reg_movprfx
+
 # SVE floating-point complex add (predicated)
 FCADD           01100100 esz:2 00000 rot:1 100 pg:3 rm:5 rd:5 \
                 rn=%reg_movprfx
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

Enable ARM_FEATURE_SVE for the generic "max" cpu.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/elfload.c | 1 +
 target/arm/cpu.c     | 7 +++++++
 target/arm/cpu64.c   | 1 +
 3 files changed, 9 insertions(+)

diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void)
     GET_FEATURE(ARM_FEATURE_V8_ATOMICS, ARM_HWCAP_A64_ATOMICS);
     GET_FEATURE(ARM_FEATURE_V8_RDM, ARM_HWCAP_A64_ASIMDRDM);
     GET_FEATURE(ARM_FEATURE_V8_FCMA, ARM_HWCAP_A64_FCMA);
+    GET_FEATURE(ARM_FEATURE_SVE, ARM_HWCAP_A64_SVE);
 #undef GET_FEATURE
 
     return hwcaps;
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s)
         env->cp15.sctlr_el[1] |= SCTLR_UCT | SCTLR_UCI | SCTLR_DZE;
         /* and to the FP/Neon instructions */
         env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 20, 2, 3);
+        /* and to the SVE instructions */
+        env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 16, 2, 3);
+        env->cp15.cptr_el[3] |= CPTR_EZ;
+        /* with maximum vector length */
+        env->vfp.zcr_el[1] = ARM_MAX_VQ - 1;
+        env->vfp.zcr_el[2] = ARM_MAX_VQ - 1;
+        env->vfp.zcr_el[3] = ARM_MAX_VQ - 1;
 #else
         /* Reset into the highest available EL */
         if (arm_feature(env, ARM_FEATURE_EL3)) {
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj)
         set_feature(&cpu->env, ARM_FEATURE_V8_RDM);
         set_feature(&cpu->env, ARM_FEATURE_V8_FP16);
         set_feature(&cpu->env, ARM_FEATURE_V8_FCMA);
+        set_feature(&cpu->env, ARM_FEATURE_SVE);
         /* For usermode -cpu max we can use a larger and more efficient DCZ
          * blocksize since we don't have to follow what the hardware does.
          */
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

We've already added the helpers with an SVE patch, all that remains
is to wire up the aa64 and aa32 translators.  Enable the feature
within -cpu max for CONFIG_USER_ONLY.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h           |  1 +
 linux-user/elfload.c       |  1 +
 target/arm/cpu.c           |  1 +
 target/arm/cpu64.c         |  1 +
 target/arm/translate-a64.c | 36 +++++++++++++++++++
 target/arm/translate.c     | 74 +++++++++++++++++++++++++++-----------
 6 files changed, 93 insertions(+), 21 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ enum arm_features {
     ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */
     ARM_FEATURE_V8_ATOMICS, /* ARMv8.1-Atomics feature */
     ARM_FEATURE_V8_RDM, /* implements v8.1 simd round multiply */
+    ARM_FEATURE_V8_DOTPROD, /* implements v8.2 simd dot product */
     ARM_FEATURE_V8_FP16, /* implements v8.2 half-precision float */
     ARM_FEATURE_V8_FCMA, /* has complex number part of v8.3 extensions.  */
     ARM_FEATURE_M_MAIN, /* M profile Main Extension */
diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void)
                 ARM_HWCAP_A64_FPHP | ARM_HWCAP_A64_ASIMDHP);
     GET_FEATURE(ARM_FEATURE_V8_ATOMICS, ARM_HWCAP_A64_ATOMICS);
     GET_FEATURE(ARM_FEATURE_V8_RDM, ARM_HWCAP_A64_ASIMDRDM);
+    GET_FEATURE(ARM_FEATURE_V8_DOTPROD, ARM_HWCAP_A64_ASIMDDP);
     GET_FEATURE(ARM_FEATURE_V8_FCMA, ARM_HWCAP_A64_FCMA);
     GET_FEATURE(ARM_FEATURE_SVE, ARM_HWCAP_A64_SVE);
 #undef GET_FEATURE
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj)
         set_feature(&cpu->env, ARM_FEATURE_V8_PMULL);
         set_feature(&cpu->env, ARM_FEATURE_CRC);
         set_feature(&cpu->env, ARM_FEATURE_V8_RDM);
+        set_feature(&cpu->env, ARM_FEATURE_V8_DOTPROD);
         set_feature(&cpu->env, ARM_FEATURE_V8_FCMA);
 #endif
     }
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj)
         set_feature(&cpu->env, ARM_FEATURE_CRC);
         set_feature(&cpu->env, ARM_FEATURE_V8_ATOMICS);
         set_feature(&cpu->env, ARM_FEATURE_V8_RDM);
+        set_feature(&cpu->env, ARM_FEATURE_V8_DOTPROD);
         set_feature(&cpu->env, ARM_FEATURE_V8_FP16);
         set_feature(&cpu->env, ARM_FEATURE_V8_FCMA);
         set_feature(&cpu->env, ARM_FEATURE_SVE);
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static void gen_gvec_op3(DisasContext *s, bool is_q, int rd,
                    vec_full_reg_size(s), gvec_op);
 }
 
+/* Expand a 3-operand operation using an out-of-line helper.  */
+static void gen_gvec_op3_ool(DisasContext *s, bool is_q, int rd,
+                             int rn, int rm, int data, gen_helper_gvec_3 *fn)
+{
+    tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd),
+                       vec_full_reg_offset(s, rn),
+                       vec_full_reg_offset(s, rm),
+                       is_q ? 16 : 8, vec_full_reg_size(s), data, fn);
+}
+
 /* Expand a 3-operand + env pointer operation using
  * an out-of-line helper.
  */
@@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn)
         }
         feature = ARM_FEATURE_V8_RDM;
         break;
+    case 0x02: /* SDOT (vector) */
+    case 0x12: /* UDOT (vector) */
+        if (size != MO_32) {
+            unallocated_encoding(s);
+            return;
+        }
+        feature = ARM_FEATURE_V8_DOTPROD;
+        break;
     case 0x8: /* FCMLA, #0 */
     case 0x9: /* FCMLA, #90 */
     case 0xa: /* FCMLA, #180 */
@@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn)
         }
         return;
 
+    case 0x2: /* SDOT / UDOT */
+        gen_gvec_op3_ool(s, is_q, rd, rn, rm, 0,
+                         u ? gen_helper_gvec_udot_b : gen_helper_gvec_sdot_b);
+        return;
+
     case 0x8: /* FCMLA, #0 */
     case 0x9: /* FCMLA, #90 */
     case 0xa: /* FCMLA, #180 */
@@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn)
             return;
         }
         break;
+    case 0x0e: /* SDOT */
+    case 0x1e: /* UDOT */
+        if (size != MO_32 || !arm_dc_feature(s, ARM_FEATURE_V8_DOTPROD)) {
+            unallocated_encoding(s);
+            return;
+        }
+        break;
     case 0x11: /* FCMLA #0 */
     case 0x13: /* FCMLA #90 */
     case 0x15: /* FCMLA #180 */
@@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn)
     }
 
     switch (16 * u + opcode) {
+    case 0x0e: /* SDOT */
+    case 0x1e: /* UDOT */
+        gen_gvec_op3_ool(s, is_q, rd, rn, rm, index,
+                         u ? gen_helper_gvec_udot_idx_b
+                         : gen_helper_gvec_sdot_idx_b);
+        return;
     case 0x11: /* FCMLA #0 */
     case 0x13: /* FCMLA #90 */
     case 0x15: /* FCMLA #180 */
diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn)
  */
 static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn)
 {
-    gen_helper_gvec_3_ptr *fn_gvec_ptr;
-    int rd, rn, rm, rot, size, opr_sz;
-    TCGv_ptr fpst;
+    gen_helper_gvec_3 *fn_gvec = NULL;
+    gen_helper_gvec_3_ptr *fn_gvec_ptr = NULL;
+    int rd, rn, rm, opr_sz;
+    int data = 0;
     bool q;
 
     q = extract32(insn, 6, 1);
@@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn)
 
     if ((insn & 0xfe200f10) == 0xfc200800) {
         /* VCMLA -- 1111 110R R.1S .... .... 1000 ...0 .... */
-        size = extract32(insn, 20, 1);
-        rot = extract32(insn, 23, 2);
+        int size = extract32(insn, 20, 1);
+        data = extract32(insn, 23, 2); /* rot */
         if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA)
             || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) {
             return 1;
@@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn)
         fn_gvec_ptr = size ? gen_helper_gvec_fcmlas : gen_helper_gvec_fcmlah;
     } else if ((insn & 0xfea00f10) == 0xfc800800) {
         /* VCADD -- 1111 110R 1.0S .... .... 1000 ...0 .... */
-        size = extract32(insn, 20, 1);
-        rot = extract32(insn, 24, 1);
+        int size = extract32(insn, 20, 1);
+        data = extract32(insn, 24, 1); /* rot */
         if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA)
             || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) {
             return 1;
         }
         fn_gvec_ptr = size ? gen_helper_gvec_fcadds : gen_helper_gvec_fcaddh;
+    } else if ((insn & 0xfeb00f00) == 0xfc200d00) {
+        /* V[US]DOT -- 1111 1100 0.10 .... .... 1101 .Q.U .... */
+        bool u = extract32(insn, 4, 1);
+        if (!arm_dc_feature(s, ARM_FEATURE_V8_DOTPROD)) {
+            return 1;
+        }
+        fn_gvec = u ? gen_helper_gvec_udot_b : gen_helper_gvec_sdot_b;
     } else {
         return 1;
     }
@@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn)
     }
 
     opr_sz = (1 + q) * 8;
-    fpst = get_fpstatus_ptr(1);
-    tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd),
-                       vfp_reg_offset(1, rn),
-                       vfp_reg_offset(1, rm), fpst,
-                       opr_sz, opr_sz, rot, fn_gvec_ptr);
-    tcg_temp_free_ptr(fpst);
+    if (fn_gvec_ptr) {
+        TCGv_ptr fpst = get_fpstatus_ptr(1);
+        tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd),
+                           vfp_reg_offset(1, rn),
+                           vfp_reg_offset(1, rm), fpst,
+                           opr_sz, opr_sz, data, fn_gvec_ptr);
+        tcg_temp_free_ptr(fpst);
+    } else {
+        tcg_gen_gvec_3_ool(vfp_reg_offset(1, rd),
+                           vfp_reg_offset(1, rn),
+                           vfp_reg_offset(1, rm),
+                           opr_sz, opr_sz, data, fn_gvec);
+    }
     return 0;
 }
 
@@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn)
 
 static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn)
 {
-    gen_helper_gvec_3_ptr *fn_gvec_ptr;
+    gen_helper_gvec_3 *fn_gvec = NULL;
+    gen_helper_gvec_3_ptr *fn_gvec_ptr = NULL;
     int rd, rn, rm, opr_sz, data;
-    TCGv_ptr fpst;
     bool q;
 
     q = extract32(insn, 6, 1);
@@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn)
         data = (index << 2) | rot;
         fn_gvec_ptr = (size ? gen_helper_gvec_fcmlas_idx
                        : gen_helper_gvec_fcmlah_idx);
+    } else if ((insn & 0xffb00f00) == 0xfe200d00) {
+        /* V[US]DOT -- 1111 1110 0.10 .... .... 1101 .Q.U .... */
+        int u = extract32(insn, 4, 1);
+        if (!arm_dc_feature(s, ARM_FEATURE_V8_DOTPROD)) {
+            return 1;
+        }
+        fn_gvec = u ? gen_helper_gvec_udot_idx_b : gen_helper_gvec_sdot_idx_b;
+        /* rm is just Vm, and index is M.  */
+        data = extract32(insn, 5, 1); /* index */
+        rm = extract32(insn, 0, 4);
     } else {
         return 1;
     }
@@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn)
     }
 
     opr_sz = (1 + q) * 8;
-    fpst = get_fpstatus_ptr(1);
-    tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd),
-                       vfp_reg_offset(1, rn),
-                       vfp_reg_offset(1, rm), fpst,
-                       opr_sz, opr_sz, data, fn_gvec_ptr);
-    tcg_temp_free_ptr(fpst);
+    if (fn_gvec_ptr) {
+        TCGv_ptr fpst = get_fpstatus_ptr(1);
+        tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd),
+                           vfp_reg_offset(1, rn),
+                           vfp_reg_offset(1, rm), fpst,
+                           opr_sz, opr_sz, data, fn_gvec_ptr);
+        tcg_temp_free_ptr(fpst);
+    } else {
+        tcg_gen_gvec_3_ool(vfp_reg_offset(1, rd),
+                           vfp_reg_offset(1, rn),
+                           vfp_reg_offset(1, rm),
+                           opr_sz, opr_sz, data, fn_gvec);
+    }
     return 0;
 }
 
-- 
2.17.1

From: Alex Bennée <alex.bennee@linaro.org>

Since kernel commit a86bd139f2 (arm64: arch_timer: Enable CNTVCT_EL0
trap..), released in kernel version v4.12, user-space has been able
to read these system registers. As we can't use QEMUTimer's in
linux-user mode we just directly call cpu_get_clock().

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180625160009.17437-2-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
 };
 
 #else
-/* In user-mode none of the generic timer registers are accessible,
- * and their implementation depends on QEMU_CLOCK_VIRTUAL and qdev gpio outputs,
- * so instead just don't register any of them.
+
+/* In user-mode most of the generic timer registers are inaccessible
+ * however modern kernels (4.12+) allow access to cntvct_el0
  */
+
+static uint64_t gt_virt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+    /* Currently we have no support for QEMUTimer in linux-user so we
+     * can't call gt_get_countervalue(env), instead we directly
+     * call the lower level functions.
+     */
+    return cpu_get_clock() / GTIMER_SCALE;
+}
+
 static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
+    { .name = "CNTFRQ_EL0", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 0,
+      .type = ARM_CP_CONST, .access = PL0_R /* no PL1_RW in linux-user */,
+      .fieldoffset = offsetof(CPUARMState, cp15.c14_cntfrq),
+      .resetvalue = NANOSECONDS_PER_SECOND / GTIMER_SCALE,
+    },
+    { .name = "CNTVCT_EL0", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 2,
+      .access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO,
+      .readfn = gt_virt_cnt_read,
+    },
     REGINFO_SENTINEL
 };
 
-- 
2.17.1

From: Jean-Christophe Dubois <jcd@tribudubois.net>

The qdev_get_gpio_in() function accept an int as second parameter.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/fsl-imx7.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx7.c
+++ b/hw/arm/fsl-imx7.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp)
             FSL_IMX7_ECSPI4_ADDR,
         };
 
-        static const hwaddr FSL_IMX7_SPIn_IRQ[FSL_IMX7_NUM_ECSPIS] = {
+        static const int FSL_IMX7_SPIn_IRQ[FSL_IMX7_NUM_ECSPIS] = {
             FSL_IMX7_ECSPI1_IRQ,
             FSL_IMX7_ECSPI2_IRQ,
             FSL_IMX7_ECSPI3_IRQ,
@@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp)
             FSL_IMX7_I2C4_ADDR,
         };
 
-        static const hwaddr FSL_IMX7_I2Cn_IRQ[FSL_IMX7_NUM_I2CS] = {
+        static const int FSL_IMX7_I2Cn_IRQ[FSL_IMX7_NUM_I2CS] = {
             FSL_IMX7_I2C1_IRQ,
             FSL_IMX7_I2C2_IRQ,
             FSL_IMX7_I2C3_IRQ,
@@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp)
             FSL_IMX7_USB3_ADDR,
         };
 
-        static const hwaddr FSL_IMX7_USBn_IRQ[FSL_IMX7_NUM_USBS] = {
+        static const int FSL_IMX7_USBn_IRQ[FSL_IMX7_NUM_USBS] = {
             FSL_IMX7_USB1_IRQ,
             FSL_IMX7_USB2_IRQ,
             FSL_IMX7_USB3_IRQ,
-- 
2.17.1

From: Aaron Lindsay <alindsay@codeaurora.org>

Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Message-id: 1529699547-17044-5-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h   |  1 +
 target/arm/cpu.c   | 21 ++++++++++++++-------
 target/arm/kvm32.c |  8 ++++----
 3 files changed, 19 insertions(+), 11 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ enum arm_features {
     ARM_FEATURE_OMAPCP, /* OMAP specific CP15 ops handling.  */
     ARM_FEATURE_THUMB2EE,
     ARM_FEATURE_V7MP,    /* v7 Multiprocessing Extensions */
+    ARM_FEATURE_V7VE, /* v7 Virtualization Extensions (non-EL2 parts) */
     ARM_FEATURE_V4T,
     ARM_FEATURE_V5,
     ARM_FEATURE_STRONGARM,
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
 
     /* Some features automatically imply others: */
     if (arm_feature(env, ARM_FEATURE_V8)) {
-        set_feature(env, ARM_FEATURE_V7);
+        set_feature(env, ARM_FEATURE_V7VE);
+    }
+    if (arm_feature(env, ARM_FEATURE_V7VE)) {
+        /* v7 Virtualization Extensions. In real hardware this implies
+         * EL2 and also the presence of the Security Extensions.
+         * For QEMU, for backwards-compatibility we implement some
+         * CPUs or CPU configs which have no actual EL2 or EL3 but do
+         * include the various other features that V7VE implies.
+         * Presence of EL2 itself is ARM_FEATURE_EL2, and of the
+         * Security Extensions is ARM_FEATURE_EL3.
+         */
         set_feature(env, ARM_FEATURE_ARM_DIV);
         set_feature(env, ARM_FEATURE_LPAE);
+        set_feature(env, ARM_FEATURE_V7);
     }
     if (arm_feature(env, ARM_FEATURE_V7)) {
         set_feature(env, ARM_FEATURE_VAPA);
@@ -XXX,XX +XXX,XX @@ static void cortex_a7_initfn(Object *obj)
     ARMCPU *cpu = ARM_CPU(obj);
 
     cpu->dtb_compatible = "arm,cortex-a7";
-    set_feature(&cpu->env, ARM_FEATURE_V7);
+    set_feature(&cpu->env, ARM_FEATURE_V7VE);
     set_feature(&cpu->env, ARM_FEATURE_VFP4);
     set_feature(&cpu->env, ARM_FEATURE_NEON);
     set_feature(&cpu->env, ARM_FEATURE_THUMB2EE);
-    set_feature(&cpu->env, ARM_FEATURE_ARM_DIV);
     set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER);
     set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
     set_feature(&cpu->env, ARM_FEATURE_CBAR_RO);
-    set_feature(&cpu->env, ARM_FEATURE_LPAE);
     set_feature(&cpu->env, ARM_FEATURE_EL3);
     cpu->kvm_target = QEMU_KVM_ARM_TARGET_CORTEX_A7;
     cpu->midr = 0x410fc075;
@@ -XXX,XX +XXX,XX @@ static void cortex_a15_initfn(Object *obj)
     ARMCPU *cpu = ARM_CPU(obj);
 
     cpu->dtb_compatible = "arm,cortex-a15";
-    set_feature(&cpu->env, ARM_FEATURE_V7);
+    set_feature(&cpu->env, ARM_FEATURE_V7VE);
     set_feature(&cpu->env, ARM_FEATURE_VFP4);
     set_feature(&cpu->env, ARM_FEATURE_NEON);
     set_feature(&cpu->env, ARM_FEATURE_THUMB2EE);
-    set_feature(&cpu->env, ARM_FEATURE_ARM_DIV);
     set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER);
     set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
     set_feature(&cpu->env, ARM_FEATURE_CBAR_RO);
-    set_feature(&cpu->env, ARM_FEATURE_LPAE);
     set_feature(&cpu->env, ARM_FEATURE_EL3);
     cpu->kvm_target = QEMU_KVM_ARM_TARGET_CORTEX_A15;
     cpu->midr = 0x412fc0f1;
diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/kvm32.c
+++ b/target/arm/kvm32.c
@@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)
     /* Now we've retrieved all the register information we can
      * set the feature bits based on the ID register fields.
      * We can assume any KVM supporting CPU is at least a v7
-     * with VFPv3, LPAE and the generic timers; this in turn implies
-     * most of the other feature bits, but a few must be tested.
+     * with VFPv3, virtualization extensions, and the generic
+     * timers; this in turn implies most of the other feature
+     * bits, but a few must be tested.
      */
-    set_feature(&features, ARM_FEATURE_V7);
+    set_feature(&features, ARM_FEATURE_V7VE);
     set_feature(&features, ARM_FEATURE_VFP3);
-    set_feature(&features, ARM_FEATURE_LPAE);
     set_feature(&features, ARM_FEATURE_GENERIC_TIMER);
 
     switch (extract32(id_isar0, 24, 4)) {
-- 
2.17.1

From: Aaron Lindsay <alindsay@codeaurora.org>

KVM implies V7VE, which implies ARM_DIV and THUMB_DIV. The conditional
detection here is therefore unnecessary. Because V7VE is already
unconditionally specified for all KVM hosts, ARM_DIV and THUMB_DIV are
already indirectly specified and do not need to be included here at all.

Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Message-id: 1529699547-17044-6-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/kvm32.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/kvm32.c
+++ b/target/arm/kvm32.c
@@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)
      * and then query that CPU for the relevant ID registers.
      */
     int i, ret, fdarray[3];
-    uint32_t midr, id_pfr0, id_isar0, mvfr1;
+    uint32_t midr, id_pfr0, mvfr1;
     uint64_t features = 0;
     /* Old kernels may not know about the PREFERRED_TARGET ioctl: however
      * we know these will only support creating one kind of guest CPU,
@@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)
             | ENCODE_CP_REG(15, 0, 0, 0, 1, 0, 0),
             .addr = (uintptr_t)&id_pfr0,
         },
-        {
-            .id = KVM_REG_ARM | KVM_REG_SIZE_U32
-            | ENCODE_CP_REG(15, 0, 0, 0, 2, 0, 0),
-            .addr = (uintptr_t)&id_isar0,
-        },
         {
             .id = KVM_REG_ARM | KVM_REG_SIZE_U32
             | KVM_REG_ARM_VFP | KVM_REG_ARM_VFP_MVFR1,
@@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)
     set_feature(&features, ARM_FEATURE_VFP3);
     set_feature(&features, ARM_FEATURE_GENERIC_TIMER);
 
-    switch (extract32(id_isar0, 24, 4)) {
-    case 1:
-        set_feature(&features, ARM_FEATURE_THUMB_DIV);
-        break;
-    case 2:
-        set_feature(&features, ARM_FEATURE_ARM_DIV);
-        set_feature(&features, ARM_FEATURE_THUMB_DIV);
-        break;
-    default:
-        break;
-    }
-
     if (extract32(id_pfr0, 12, 4) == 1) {
         set_feature(&features, ARM_FEATURE_THUMB2EE);
     }
-- 
2.17.1

From: Aaron Lindsay <alindsay@codeaurora.org>

This makes it match its AArch64 equivalent, PMINTENSET_EL1

Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Message-id: 1529699547-17044-13-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .writefn = pmuserenr_write, .raw_writefn = raw_write },
     { .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1,
       .access = PL1_RW, .accessfn = access_tpm,
-      .type = ARM_CP_ALIAS,
+      .type = ARM_CP_ALIAS | ARM_CP_IO,
       .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pminten),
       .resetvalue = 0,
       .writefn = pmintenset_write, .raw_writefn = raw_write },
-- 
2.17.1

We don't actually implement SD command CRC checking, because
for almost all of our SD controllers the CRC generation is
done in hardware, and so modelling CRC generation and checking
would be a bit pointless. (The exception is that milkymist-memcard
makes the guest software compute the CRC.)

As a result almost all of our SD controller models don't bother
to set the SDRequest crc field, and the SD card model doesn't
check it. So the tracing of it in sdbus_do_command() provokes
Coverity warnings about use of uninitialized data.

Drop the CRC field from the trace; we can always add it back
if and when we do anything useful with the CRC.

Fixes Coverity issues 1386072, 1386074, 1386076, 1390571.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180626180324.5537-1-peter.maydell@linaro.org
---
 hw/sd/core.c       | 2 +-
 hw/sd/trace-events | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/sd/core.c b/hw/sd/core.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/sd/core.c
+++ b/hw/sd/core.c
@@ -XXX,XX +XXX,XX @@ int sdbus_do_command(SDBus *sdbus, SDRequest *req, uint8_t *response)
 {
     SDState *card = get_card(sdbus);
 
-    trace_sdbus_command(sdbus_name(sdbus), req->cmd, req->arg, req->crc);
+    trace_sdbus_command(sdbus_name(sdbus), req->cmd, req->arg);
     if (card) {
         SDCardClass *sc = SD_CARD_GET_CLASS(card);
 
diff --git a/hw/sd/trace-events b/hw/sd/trace-events
index XXXXXXX..XXXXXXX 100644
--- a/hw/sd/trace-events
+++ b/hw/sd/trace-events
@@ -XXX,XX +XXX,XX @@ bcm2835_sdhost_edm_change(const char *why, uint32_t edm) "(%s) EDM now 0x%x"
 bcm2835_sdhost_update_irq(uint32_t irq) "IRQ bits 0x%x\n"
 
 # hw/sd/core.c
-sdbus_command(const char *bus_name, uint8_t cmd, uint32_t arg, uint8_t crc) "@%s CMD%02d arg 0x%08x crc 0x%02x"
+sdbus_command(const char *bus_name, uint8_t cmd, uint32_t arg) "@%s CMD%02d arg 0x%08x"
 sdbus_read(const char *bus_name, uint8_t value) "@%s value 0x%02x"
 sdbus_write(const char *bus_name, uint8_t value) "@%s value 0x%02x"
 sdbus_set_voltage(const char *bus_name, uint16_t millivolts) "@%s %u (mV)"
-- 
2.17.1

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

The load/store API will ease further code movement.

Per the Physical Layer Simplified Spec. "3.6 Bus Protocol":

"In the CMD line the Most Significant Bit (MSB) is transmitted
   first, the Least Significant Bit (LSB) is the last."

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/bcm2835_sdhost.c    | 13 +++++--------
 hw/sd/milkymist-memcard.c |  3 +--
 hw/sd/omap_mmc.c          |  6 ++----
 hw/sd/pl181.c             | 11 ++++-------
 hw/sd/sdhci.c             | 15 +++++----------
 hw/sd/ssi-sd.c            |  6 ++----
 6 files changed, 19 insertions(+), 35 deletions(-)

diff --git a/hw/sd/bcm2835_sdhost.c b/hw/sd/bcm2835_sdhost.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/sd/bcm2835_sdhost.c
+++ b/hw/sd/bcm2835_sdhost.c
@@ -XXX,XX +XXX,XX @@ static void bcm2835_sdhost_send_command(BCM2835SDHostState *s)
         goto error;
     }
     if (!(s->cmd & SDCMD_NO_RESPONSE)) {
-#define RWORD(n) (((uint32_t)rsp[n] << 24) | (rsp[n + 1] << 16) \
-                  | (rsp[n + 2] << 8) | rsp[n + 3])
         if (rlen == 0 || (rlen == 4 && (s->cmd & SDCMD_LONG_RESPONSE))) {
             goto error;
         }
@@ -XXX,XX +XXX,XX @@ static void bcm2835_sdhost_send_command(BCM2835SDHostState *s)
             goto error;
         }
         if (rlen == 4) {
-            s->rsp[0] = RWORD(0);
+            s->rsp[0] = ldl_be_p(&rsp[0]);
             s->rsp[1] = s->rsp[2] = s->rsp[3] = 0;
         } else {
-            s->rsp[0] = RWORD(12);
-            s->rsp[1] = RWORD(8);
-            s->rsp[2] = RWORD(4);
-            s->rsp[3] = RWORD(0);
+            s->rsp[0] = ldl_be_p(&rsp[12]);
+            s->rsp[1] = ldl_be_p(&rsp[8]);
+            s->rsp[2] = ldl_be_p(&rsp[4]);
+            s->rsp[3] = ldl_be_p(&rsp[0]);
         }
-#undef RWORD
     }
     /* We never really delay commands, so if this was a 'busywait' command
      * then we've completed it now and can raise the interrupt.
diff --git a/hw/sd/milkymist-memcard.c b/hw/sd/milkymist-memcard.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/sd/milkymist-memcard.c
+++ b/hw/sd/milkymist-memcard.c
@@ -XXX,XX +XXX,XX @@ static void memcard_sd_command(MilkymistMemcardState *s)
     SDRequest req;
 
     req.cmd = s->command[0] & 0x3f;
-    req.arg = (s->command[1] << 24) | (s->command[2] << 16)
-              | (s->command[3] << 8) | s->command[4];
+    req.arg = ldl_be_p(s->command + 1);
     req.crc = s->command[5];
 
     s->response[0] = req.cmd;
diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/sd/omap_mmc.c
+++ b/hw/sd/omap_mmc.c
@@ -XXX,XX +XXX,XX @@ static void omap_mmc_command(struct omap_mmc_s *host, int cmd, int dir,
                 CID_CSD_OVERWRITE;
         if (host->sdio & (1 << 13))
             mask |= AKE_SEQ_ERROR;
-        rspstatus = (response[0] << 24) | (response[1] << 16) |
-                (response[2] << 8) | (response[3] << 0);
+        rspstatus = ldl_be_p(response);
         break;
 
     case sd_r2:
@@ -XXX,XX +XXX,XX @@ static void omap_mmc_command(struct omap_mmc_s *host, int cmd, int dir,
         }
         rsplen = 4;
 
-        rspstatus = (response[0] << 24) | (response[1] << 16) |
-                (response[2] << 8) | (response[3] << 0);
+        rspstatus = ldl_be_p(response);
         if (rspstatus & 0x80000000)
             host->status &= 0xe000;
         else
diff --git a/hw/sd/pl181.c b/hw/sd/pl181.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/sd/pl181.c
+++ b/hw/sd/pl181.c
@@ -XXX,XX +XXX,XX @@ static void pl181_send_command(PL181State *s)
     if (rlen < 0)
         goto error;
     if (s->cmd & PL181_CMD_RESPONSE) {
-#define RWORD(n) (((uint32_t)response[n] << 24) | (response[n + 1] << 16) \
-                  | (response[n + 2] << 8) | response[n + 3])
         if (rlen == 0 || (rlen == 4 && (s->cmd & PL181_CMD_LONGRESP)))
             goto error;
         if (rlen != 4 && rlen != 16)
             goto error;
-        s->response[0] = RWORD(0);
+        s->response[0] = ldl_be_p(&response[0]);
         if (rlen == 4) {
             s->response[1] = s->response[2] = s->response[3] = 0;
         } else {
-            s->response[1] = RWORD(4);
-            s->response[2] = RWORD(8);
-            s->response[3] = RWORD(12) & ~1;
+            s->response[1] = ldl_be_p(&response[4]);
+            s->response[2] = ldl_be_p(&response[8]);
+            s->response[3] = ldl_be_p(&response[12]) & ~1;
         }
         DPRINTF("Response received\n");
         s->status |= PL181_STATUS_CMDRESPEND;
-#undef RWORD
     } else {
         DPRINTF("Command sent\n");
         s->status |= PL181_STATUS_CMDSENT;
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -XXX,XX +XXX,XX @@ static void sdhci_send_command(SDHCIState *s)
 
     if (s->cmdreg & SDHC_CMD_RESPONSE) {
         if (rlen == 4) {
-            s->rspreg[0] = (response[0] << 24) | (response[1] << 16) |
-                           (response[2] << 8)  |  response[3];
+            s->rspreg[0] = ldl_be_p(response);
             s->rspreg[1] = s->rspreg[2] = s->rspreg[3] = 0;
             trace_sdhci_response4(s->rspreg[0]);
         } else if (rlen == 16) {
-            s->rspreg[0] = (response[11] << 24) | (response[12] << 16) |
-                           (response[13] << 8) |  response[14];
-            s->rspreg[1] = (response[7] << 24) | (response[8] << 16) |
-                           (response[9] << 8)  |  response[10];
-            s->rspreg[2] = (response[3] << 24) | (response[4] << 16) |
-                           (response[5] << 8)  |  response[6];
+            s->rspreg[0] = ldl_be_p(&response[11]);
+            s->rspreg[1] = ldl_be_p(&response[7]);
+            s->rspreg[2] = ldl_be_p(&response[3]);
             s->rspreg[3] = (response[0] << 16) | (response[1] << 8) |
                             response[2];
             trace_sdhci_response16(s->rspreg[3], s->rspreg[2],
@@ -XXX,XX +XXX,XX @@ static void sdhci_end_transfer(SDHCIState *s)
         trace_sdhci_end_transfer(request.cmd, request.arg);
         sdbus_do_command(&s->sdbus, &request, response);
         /* Auto CMD12 response goes to the upper Response register */
-        s->rspreg[3] = (response[0] << 24) | (response[1] << 16) |
-                (response[2] << 8) | response[3];
+        s->rspreg[3] = ldl_be_p(response);
     }
 
     s->prnsts &= ~(SDHC_DOING_READ | SDHC_DOING_WRITE |
diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/sd/ssi-sd.c
+++ b/hw/sd/ssi-sd.c
@@ -XXX,XX +XXX,XX @@ static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val)
             uint8_t longresp[16];
             /* FIXME: Check CRC.  */
             request.cmd = s->cmd;
-            request.arg = (s->cmdarg[0] << 24) | (s->cmdarg[1] << 16)
-                           | (s->cmdarg[2] << 8) | s->cmdarg[3];
+            request.arg = ldl_be_p(s->cmdarg);
             DPRINTF("CMD%d arg 0x%08x\n", s->cmd, request.arg);
             s->arglen = sdbus_do_command(&s->sdbus, &request, longresp);
             if (s->arglen <= 0) {
@@ -XXX,XX +XXX,XX @@ static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val)
                 /* CMD13 returns a 2-byte statuse work. Other commands
                    only return the first byte.  */
                 s->arglen = (s->cmd == 13) ? 2 : 1;
-                cardstatus = (longresp[0] << 24) | (longresp[1] << 16)
-                             | (longresp[2] << 8) | longresp[3];
+                cardstatus = ldl_be_p(longresp);
                 status = 0;
                 if (((cardstatus >> 9) & 0xf) < 4)
                     status |= SSI_SDR_IDLE;
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

We already check for the same condition within the normal integer
sdiv and sdiv64 helpers.  Use a slightly different formation that
does not require deducing the expression type.

Fixes: f97cfd596ed
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-2-richard.henderson@linaro.org
[PMM: reworded a comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/sve_helper.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/sve_helper.c
+++ b/target/arm/sve_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(NAME)(void *vd, void *vn, void *vm, void *vg, uint32_t desc) \
 #define DO_MIN(N, M)  ((N) >= (M) ? (M) : (N))
 #define DO_ABD(N, M)  ((N) >= (M) ? (N) - (M) : (M) - (N))
 #define DO_MUL(N, M)  (N * M)
-#define DO_DIV(N, M)  (M ? N / M : 0)
+
+
+/*
+ * We must avoid the C undefined behaviour cases: division by
+ * zero and signed division of INT_MIN by -1. Both of these
+ * have architecturally defined required results for Arm.
+ * We special case all signed divisions by -1 to avoid having
+ * to deduce the minimum integer for the type involved.
+ */
+#define DO_SDIV(N, M) (unlikely(M == 0) ? 0 : unlikely(M == -1) ? -N : N / M)
+#define DO_UDIV(N, M) (unlikely(M == 0) ? 0 : N / M)
 
 DO_ZPZZ(sve_and_zpzz_b, uint8_t, H1, DO_AND)
 DO_ZPZZ(sve_and_zpzz_h, uint16_t, H1_2, DO_AND)
@@ -XXX,XX +XXX,XX @@ DO_ZPZZ(sve_umulh_zpzz_h, uint16_t, H1_2, do_mulh_h)
 DO_ZPZZ(sve_umulh_zpzz_s, uint32_t, H1_4, do_mulh_s)
 DO_ZPZZ_D(sve_umulh_zpzz_d, uint64_t, do_umulh_d)
 
-DO_ZPZZ(sve_sdiv_zpzz_s, int32_t, H1_4, DO_DIV)
-DO_ZPZZ_D(sve_sdiv_zpzz_d, int64_t, DO_DIV)
+DO_ZPZZ(sve_sdiv_zpzz_s, int32_t, H1_4, DO_SDIV)
+DO_ZPZZ_D(sve_sdiv_zpzz_d, int64_t, DO_SDIV)
 
-DO_ZPZZ(sve_udiv_zpzz_s, uint32_t, H1_4, DO_DIV)
-DO_ZPZZ_D(sve_udiv_zpzz_d, uint64_t, DO_DIV)
+DO_ZPZZ(sve_udiv_zpzz_s, uint32_t, H1_4, DO_UDIV)
+DO_ZPZZ_D(sve_udiv_zpzz_d, uint64_t, DO_UDIV)
 
 /* Note that all bits of the shift are significant
    and not modulo the element size.  */
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

Leave ARM_CP_SVE, removing ARM_CP_FPU; the sve_access_check
produced by the flag already includes fp_access_check.  If
we also check ARM_CP_FPU the double fp_access_check asserts.

Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180629001538.11415-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c        | 8 ++++----
 target/arm/translate-a64.c | 5 ++---
 2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static void zcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
 static const ARMCPRegInfo zcr_el1_reginfo = {
     .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64,
     .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0,
-    .access = PL1_RW, .type = ARM_CP_SVE | ARM_CP_FPU,
+    .access = PL1_RW, .type = ARM_CP_SVE,
     .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]),
     .writefn = zcr_write, .raw_writefn = raw_write
 };
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo zcr_el1_reginfo = {
 static const ARMCPRegInfo zcr_el2_reginfo = {
     .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64,
     .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0,
-    .access = PL2_RW, .type = ARM_CP_SVE | ARM_CP_FPU,
+    .access = PL2_RW, .type = ARM_CP_SVE,
     .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]),
     .writefn = zcr_write, .raw_writefn = raw_write
 };
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo zcr_el2_reginfo = {
 static const ARMCPRegInfo zcr_no_el2_reginfo = {
     .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64,
     .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0,
-    .access = PL2_RW, .type = ARM_CP_SVE | ARM_CP_FPU,
+    .access = PL2_RW, .type = ARM_CP_SVE,
     .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore
 };
 
 static const ARMCPRegInfo zcr_el3_reginfo = {
     .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64,
     .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0,
-    .access = PL3_RW, .type = ARM_CP_SVE | ARM_CP_FPU,
+    .access = PL3_RW, .type = ARM_CP_SVE,
     .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]),
     .writefn = zcr_write, .raw_writefn = raw_write
 };
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread,
     default:
         break;
     }
-    if ((ri->type & ARM_CP_SVE) && !sve_access_check(s)) {
-        return;
-    }
     if ((ri->type & ARM_CP_FPU) && !fp_access_check(s)) {
         return;
+    } else if ((ri->type & ARM_CP_SVE) && !sve_access_check(s)) {
+        return;
     }
 
     if ((tb_cflags(s->base.tb) & CF_USE_ICOUNT) && (ri->type & ARM_CP_IO)) {
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

There is no need to re-set these 9 features already
implied by the call to aarch64_a57_initfn.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu64.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj)
          * whereas the architecture requires them to be present in both if
          * present in either.
          */
-        set_feature(&cpu->env, ARM_FEATURE_V8);
-        set_feature(&cpu->env, ARM_FEATURE_VFP4);
-        set_feature(&cpu->env, ARM_FEATURE_NEON);
-        set_feature(&cpu->env, ARM_FEATURE_AARCH64);
-        set_feature(&cpu->env, ARM_FEATURE_V8_AES);
-        set_feature(&cpu->env, ARM_FEATURE_V8_SHA1);
-        set_feature(&cpu->env, ARM_FEATURE_V8_SHA256);
         set_feature(&cpu->env, ARM_FEATURE_V8_SHA512);
         set_feature(&cpu->env, ARM_FEATURE_V8_SHA3);
         set_feature(&cpu->env, ARM_FEATURE_V8_SM3);
         set_feature(&cpu->env, ARM_FEATURE_V8_SM4);
-        set_feature(&cpu->env, ARM_FEATURE_V8_PMULL);
-        set_feature(&cpu->env, ARM_FEATURE_CRC);
         set_feature(&cpu->env, ARM_FEATURE_V8_ATOMICS);
         set_feature(&cpu->env, ARM_FEATURE_V8_RDM);
         set_feature(&cpu->env, ARM_FEATURE_V8_DOTPROD);
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

There is no need to re-set these 3 features already
implied by the call to aarch64_a15_initfn.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj)
          * since we don't correctly set the ID registers to advertise them,
          */
         set_feature(&cpu->env, ARM_FEATURE_V8);
-        set_feature(&cpu->env, ARM_FEATURE_VFP4);
-        set_feature(&cpu->env, ARM_FEATURE_NEON);
-        set_feature(&cpu->env, ARM_FEATURE_THUMB2EE);
         set_feature(&cpu->env, ARM_FEATURE_V8_AES);
         set_feature(&cpu->env, ARM_FEATURE_V8_SHA1);
         set_feature(&cpu->env, ARM_FEATURE_V8_SHA256);
-- 
2.17.1

From: Richard Henderson <richard.henderson@linaro.org>

This register was added to aa32 state by ARMv8.2.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h    | 1 +
 target/arm/cpu.c    | 4 ++++
 target/arm/cpu64.c  | 2 ++
 target/arm/helper.c | 5 ++---
 4 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ struct ARMCPU {
     uint32_t id_isar3;
     uint32_t id_isar4;
     uint32_t id_isar5;
+    uint32_t id_isar6;
     uint64_t id_aa64pfr0;
     uint64_t id_aa64pfr1;
     uint64_t id_aa64dfr0;
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void cortex_m3_initfn(Object *obj)
     cpu->id_isar3 = 0x01111110;
     cpu->id_isar4 = 0x01310102;
     cpu->id_isar5 = 0x00000000;
+    cpu->id_isar6 = 0x00000000;
 }
 
 static void cortex_m4_initfn(Object *obj)
@@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj)
     cpu->id_isar3 = 0x01111110;
     cpu->id_isar4 = 0x01310102;
     cpu->id_isar5 = 0x00000000;
+    cpu->id_isar6 = 0x00000000;
 }
 
 static void cortex_m33_initfn(Object *obj)
@@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj)
     cpu->id_isar3 = 0x01111131;
     cpu->id_isar4 = 0x01310132;
     cpu->id_isar5 = 0x00000000;
+    cpu->id_isar6 = 0x00000000;
     cpu->clidr = 0x00000000;
     cpu->ctr = 0x8000c000;
 }
@@ -XXX,XX +XXX,XX @@ static void cortex_r5_initfn(Object *obj)
     cpu->id_isar3 = 0x01112131;
     cpu->id_isar4 = 0x0010142;
     cpu->id_isar5 = 0x0;
+    cpu->id_isar6 = 0x0;
     cpu->mp_is_up = true;
     cpu->pmsav7_dregion = 16;
     define_arm_cp_regs(cpu, cortexr5_cp_reginfo);
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_a57_initfn(Object *obj)
     cpu->id_isar3 = 0x01112131;
     cpu->id_isar4 = 0x00011142;
     cpu->id_isar5 = 0x00011121;
+    cpu->id_isar6 = 0;
     cpu->id_aa64pfr0 = 0x00002222;
     cpu->id_aa64dfr0 = 0x10305106;
     cpu->pmceid0 = 0x00000000;
@@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj)
     cpu->id_isar3 = 0x01112131;
     cpu->id_isar4 = 0x00011142;
     cpu->id_isar5 = 0x00011121;
+    cpu->id_isar6 = 0;
     cpu->id_aa64pfr0 = 0x00002222;
     cpu->id_aa64dfr0 = 0x10305106;
     cpu->id_aa64isar0 = 0x00011120;
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6,
               .access = PL1_R, .type = ARM_CP_CONST,
               .resetvalue = cpu->id_mmfr4 },
-            /* 7 is as yet unallocated and must RAZ */
-            { .name = "ID_ISAR7_RESERVED", .state = ARM_CP_STATE_BOTH,
+            { .name = "ID_ISAR6", .state = ARM_CP_STATE_BOTH,
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 7,
               .access = PL1_R, .type = ARM_CP_CONST,
-              .resetvalue = 0 },
+              .resetvalue = cpu->id_isar6 },
             REGINFO_SENTINEL
         };
         define_arm_cp_regs(cpu, v6_idregs);
-- 
2.17.1

Hi; here's another arm pullreq; main parts here are the
new i.MX 8MM EVK board, and a lot of refactoring.

thanks
-- PMM

The following changes since commit aa15257174da180c6a8a9d58f87319cfe61c5520:

Merge tag 'pbouvier/pr/plugins-20260424' of https://gitlab.com/p-b-o/qemu into staging (2026-04-25 10:22:04 -0400)

are available in the Git repository at:

https://gitlab.com/pm215/qemu.git tags/pull-target-arm-20260427

for you to fetch changes up to 4575da5ecb7a27544aa6da1f78e700e8100ceaea:

target/arm: report register in WFIT syndromes (2026-04-27 11:46:34 +0100)

----------------------------------------------------------------
target-arm queue:
docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list
hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board
target/arm: Build M-profile helper code once only
hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register
hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header
target/arm: Allow 'aarch64=off' to be set for TCG CPUs
target/arm: Allow some sysregs to not have to be an exact match for migration
hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices
hw/arm/fsl-imx6ul: Implement LCDIF display device
target/arm: Refactor syndrome value code to use registerfields
target/arm: Report the register in WFxT syndromes

----------------------------------------------------------------
Alex Bennée (24):
      docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list
      target/arm: migrate basic syndrome helpers to registerfields
      target/arm: migrate system/cp trap syndromes to registerfields
      target/arm: migrate FP/SIMD trap syndromes to registerfields
      target/arm: migrate eret trap syndromes to registerfields
      target/arm: migrate SME trap syndromes to registerfields
      target/arm: migrate PAC trap syndromes to registerfields
      target/arm: migrate BTI trap syndromes to registerfields
      target/arm: migrate BXJ trap syndromes to registerfields
      target/arm: migrate Granule Protection traps to registerfields
      target/arm: migrate fault syndromes to registerfields
      target/arm: migrate debug syndromes to registerfields
      target/arm: migrate wfx syndromes to registerfields
      target/arm: migrate gcs syndromes to registerfields
      target/arm: migrate memory op syndromes to registerfields
      target/arm: migrate check_hcr_el2_trap to use syndrome helper
      target/arm: use syndrome helpers in arm_cpu_do_interrupt_aarch32_hyp
      target/arm: use syndrome helpers to set SAME_EL EC bit
      target/arm: make whpx use syndrome helpers for decode
      target/arm: make hvf use syndrome helpers for decode
      target/arm: use syndrome helpers in merge_syn_data_abort
      target/arm: use syndrome helpers to query VNCR bit
      target/arm: remove old syndrome defines
      target/arm: report register in WFIT syndromes

Eric Auger (7):
      target/arm/cpu: Introduce the infrastructure for cpreg migration tolerances
      target/arm/machine: Handle ToleranceNotOnBothEnds migration tolerances
      target/arm/machine: Handle ToleranceOnlySrcTestValue migration tolerance
      target/arm/cpu64: Mitigate migration failures due to spurious TCR_EL1, PIRE0_EL1 and PIR_EL1
      target/arm/cpu64: Define cpreg migration tolerance for KVM_REG_ARM_VENDOR_HYP_BMAP_2
      target/arm/helper: Define cpreg migration tolerance for DGBDTR_EL0
      Revert "target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat"

Gaurav Sharma (15):
      hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board
      hw/misc/imx8mp_analog: Add property to analog device
      hw/arm/fsl-imx8mm: Add Analog device IP to iMX8MM SOC
      hw/arm/fsl-imx8mm: Add Clock Control Module IP to iMX8MM
      hw/arm/fsl-imx8mm: Implemented support for SNVS
      hw/arm/fsl-imx8mm: Adding support for USDHC storage controllers
      hw/arm/fsl-imx8mm: Add PCIe support
      hw/arm/fsl-imx8mm: Add GPIO controllers
      hw/arm/fsl-imx8mm: Adding support for I2C emulation
      hw/arm/fsl-imx8mm: Adding support for SPI controller
      hw/arm/fsl-imx8mm: Adding support for Watchdog Timers
      hw/arm/fsl-imx8mm: Adding support for General Purpose Timers
      hw/arm/fsl-imx8mm: Adding support for ENET ethernet controller
      hw/arm/fsl-imx8mm: Adding support for USB controller
      hw/arm/fsl-imx8mm: Adding functional testing of iMX8MM emulation

Osama Abdelkader (1):
      hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices

Peter Maydell (4):
      hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header
      target/arm: Clear AArch64 ID regs from ARMISARegisters if AArch64 disabled
      target/arm: Allow 'aarch64=off' to be set for TCG CPUs
      tests/functional/aarch64: Add basic test of TCG aarch64=off

Philippe Mathieu-Daudé (9):
      target/arm: Ignore endianness when setting MTE tags
      target/arm: Explode MO_TExx -> MO_TE | MO_xx
      target/arm: Hoist MO_TE into mve_advance_vpt()
      target/arm: Hoist MO_TE into MVE DO_VSTR() macro
      target/arm: Introduce mo_endian() helper
      target/arm: Replace MO_TE -> mo_endian() for MVE helpers
      target/arm: Compile mve_helper.c once
      target/arm: Replace MO_TE -> mo_endian() for Cortex-M helpers
      target/arm: Compile m_helper.c once

Thomas Huth (1):
      hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register

Yucai Liu (2):
      hw/display: Add i.MX6UL LCDIF device model
      hw/arm/fsl-imx6ul: Wire in the LCDIF device model

MAINTAINERS                                       |  16 +-
 docs/system/arm/cpu-features.rst                  |  10 +-
 docs/system/arm/emulation.rst                     |   2 +
 docs/system/arm/{imx8mp-evk.rst => imx8m.rst}     |  49 +-
 docs/system/target-arm.rst                        |   2 +-
 hw/arm/Kconfig                                    |  25 +
 hw/arm/fsl-imx6ul.c                               |  12 +-
 hw/arm/fsl-imx8mm.c                               | 704 ++++++++++++++++++++++
 hw/arm/imx8mm-evk.c                               | 130 ++++
 hw/arm/integratorcp.c                             |   3 -
 hw/arm/meson.build                                |   2 +
 hw/arm/raspi4b.c                                  |  10 +-
 hw/arm/realview.c                                 |   2 +-
 hw/arm/vexpress.c                                 |   2 +-
 hw/arm/virt.c                                     |   1 -
 hw/display/Kconfig                                |   4 +
 hw/display/imx6ul_lcdif.c                         | 453 ++++++++++++++
 hw/display/meson.build                            |   1 +
 hw/misc/arm_sysctl.c                              |   2 +-
 hw/misc/imx8mp_analog.c                           |  12 +-
 hw/timer/imx_gpt.c                                |  26 +
 hw/vmapple/vmapple.c                              |   1 -
 include/hw/arm/fsl-imx6ul.h                       |   4 +-
 include/hw/arm/fsl-imx8mm.h                       | 242 ++++++++
 include/hw/arm/primecell.h                        |  12 -
 include/hw/display/imx6ul_lcdif.h                 |  37 ++
 include/hw/misc/arm_sysctl.h                      |  16 +
 include/hw/misc/imx8mp_analog.h                   |   3 +
 include/hw/timer/imx_gpt.h                        |   2 +
 target/arm/cpu-features.h                         |   5 +
 target/arm/cpu.c                                  | 153 ++++-
 target/arm/cpu.h                                  |   4 +-
 target/arm/cpu64.c                                |  39 ++
 target/arm/debug_helper.c                         |  29 -
 target/arm/helper.c                               |  27 +-
 target/arm/hvf/hvf.c                              |  14 +-
 target/arm/internals.h                            |  60 ++
 target/arm/machine.c                              |  33 +-
 target/arm/syndrome.h                             | 595 ++++++++++++++----
 target/arm/tcg/debug.c                            |   2 +-
 target/arm/tcg/helper-a64.c                       |   2 +-
 target/arm/tcg/helper-defs.h                      |   2 +-
 target/arm/tcg/m_helper.c                         |   8 +-
 target/arm/tcg/meson.build                        |   6 +-
 target/arm/tcg/mve_helper.c                       | 102 ++--
 target/arm/tcg/op_helper.c                        |   7 +-
 target/arm/tcg/tlb_helper.c                       |   6 +-
 target/arm/tcg/translate-a64.c                    |   2 +-
 target/arm/tcg/vfp_helper.c                       |   5 +-
 target/arm/trace-events                           |   2 +
 target/arm/whpx/whpx-all.c                        |  13 +-
 tests/functional/aarch64/meson.build              |   3 +
 tests/functional/aarch64/test_imx8mm_evk.py       |  69 +++
 tests/functional/aarch64/test_virt_aarch64_off.py |  37 ++
 tests/qtest/arm-cpu-features.c                    |   8 +-
 55 files changed, 2743 insertions(+), 275 deletions(-)
 rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%)
 create mode 100644 hw/arm/fsl-imx8mm.c
 create mode 100644 hw/arm/imx8mm-evk.c
 create mode 100644 hw/display/imx6ul_lcdif.c
 create mode 100644 include/hw/arm/fsl-imx8mm.h
 delete mode 100644 include/hw/arm/primecell.h
 create mode 100644 include/hw/display/imx6ul_lcdif.h
 create mode 100644 include/hw/misc/arm_sysctl.h
 create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py
 create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py

From: Alex Bennée <alex.bennee@linaro.org>

This is just a documentation tweak as we already support both.
FEAT_AA32 implies FEAT_AA32EL0. FEAT_AA64 implies FEAT_AA64EL[0123].

This is however useful if you are using emulation.rst as a source of
truth of what QEMU emulates and when cross checking with
Features.json from Arm.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260421093506.616307-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/emulation.rst | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/emulation.rst
+++ b/docs/system/arm/emulation.rst
@@ -XXX,XX +XXX,XX @@ QEMU's TCG emulation includes support for the Armv5, Armv6, Armv7,
 Armv8 and Armv9 versions of the A-profile architecture. It also has support for
 the following architecture extensions:
 
+- FEAT_AA32 (PE Support for AArch32)
 - FEAT_AA32BF16 (AArch32 BFloat16 instructions)
 - FEAT_AA32EL0 (Support for AArch32 at EL0)
 - FEAT_AA32EL1 (Support for AArch32 at EL1)
@@ -XXX,XX +XXX,XX @@ the following architecture extensions:
 - FEAT_AA32EL3 (Support for AArch32 at EL3)
 - FEAT_AA32HPD (AArch32 hierarchical permission disables)
 - FEAT_AA32I8MM (AArch32 Int8 matrix multiplication instructions)
+- FEAT_AA64 (PE uses AArch64 after last reboot)
 - FEAT_AA64EL0 (Support for AArch64 at EL0)
 - FEAT_AA64EL1 (Support for AArch64 at EL1)
 - FEAT_AA64EL2 (Support for AArch64 at EL2)
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Implemented CPUs, RAM, UARTs and Interrupt Controller
Other peripherals are represented as TYPE_UNIMPLEMENTED_DEVICE
Complete memory map of the SoC is provided.

Set default RAM size to 2GB and default CPU count to 4 to match
the real i.MX8MM EVK hardware configuration.

Documentation is shared with imx8mp-evk to avoid duplication.

Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
[PMM: fixed over-long lines in doc]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 MAINTAINERS                                   |  11 +-
 docs/system/arm/{imx8mp-evk.rst => imx8m.rst} |  49 ++-
 docs/system/target-arm.rst                    |   2 +-
 hw/arm/Kconfig                                |  12 +
 hw/arm/fsl-imx8mm.c                           | 377 ++++++++++++++++++
 hw/arm/imx8mm-evk.c                           | 112 ++++++
 hw/arm/meson.build                            |   2 +
 include/hw/arm/fsl-imx8mm.h                   | 158 ++++++++
 8 files changed, 709 insertions(+), 14 deletions(-)
 rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%)
 create mode 100644 hw/arm/fsl-imx8mm.c
 create mode 100644 hw/arm/imx8mm-evk.c
 create mode 100644 include/hw/arm/fsl-imx8mm.h

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/pci-host/designware.c
 F: include/hw/pci-host/designware.h
 F: docs/system/arm/mcimx7d-sabre.rst
 
+MCIMX8MM-EVK / iMX8MM
+M: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+L: qemu-arm@nongnu.org
+S: Maintained
+F: hw/arm/fsl-imx8mm.c
+F: hw/arm/imx8mm-evk.c
+F: include/hw/arm/fsl-imx8mm.h
+F: docs/system/arm/imx8m.rst
+
 MCIMX8MP-EVK / i.MX8MP
 M: Bernhard Beschow <shentey@gmail.com>
 L: qemu-arm@nongnu.org
@@ -XXX,XX +XXX,XX @@ F: hw/rtc/rs5c372.c
 F: include/hw/arm/fsl-imx8mp.h
 F: include/hw/misc/imx8mp_*.h
 F: include/hw/pci-host/fsl_imx8m_phy.h
-F: docs/system/arm/imx8mp-evk.rst
+F: docs/system/arm/imx8m.rst
 F: tests/functional/aarch64/test_imx8mp_evk.py
 F: tests/qtest/rs5c372-test.c
 
diff --git a/docs/system/arm/imx8mp-evk.rst b/docs/system/arm/imx8m.rst
similarity index 58%
rename from docs/system/arm/imx8mp-evk.rst
rename to docs/system/arm/imx8m.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/imx8mp-evk.rst
+++ b/docs/system/arm/imx8m.rst
@@ -XXX,XX +XXX,XX @@
-NXP i.MX 8M Plus Evaluation Kit (``imx8mp-evk``)
-================================================
+NXP i.MX 8M Plus and i.MX 8M Mini Evaluation Kits (``imx8mp-evk``, ``imx8mm-evk``)
+==================================================================================
 
-The ``imx8mp-evk`` machine models the i.MX 8M Plus Evaluation Kit, based on an
-i.MX 8M Plus SoC.
+The ``imx8mp-evk`` and ``imx8mm-evk`` machine models the i.MX 8M Plus
+and i.MX 8M Mini Evaluation Kits, based on i.MX 8M Plus and i.MX8M
+Mini SoCs.
 
 Supported devices
 -----------------
 
-The ``imx8mp-evk`` machine implements the following devices:
+The ``imx8mp-evk`` and ``imx8mm-evk`` machines implement the
+following devices:
 
  * Up to 4 Cortex-A53 cores
  * Generic Interrupt Controller (GICv3)
@@ -XXX,XX +XXX,XX @@ The ``imx8mp-evk`` machine implements the following devices:
 Boot options
 ------------
 
-The ``imx8mp-evk`` machine can start a Linux kernel directly using the standard
-``-kernel`` functionality.
+The ``imx8mp-evk`` and ``imx8mm-evk`` machines can start a Linux
+kernel directly using the standard ``-kernel`` functionality.
 
 Direct Linux Kernel Boot
 ''''''''''''''''''''''''
@@ -XXX,XX +XXX,XX @@ is to generate an image with Buildroot. Version 2024.11.1 is tested at the time
 of writing and involves two steps. First run the following commands in the
 toplevel directory of the Buildroot source tree:
 
+For i.MX 8M Plus EVK:
+
 .. code-block:: bash
 
   $ make freescale_imx8mpevk_defconfig
   $ make
 
+For i.MX 8M Mini EVK:
+
+.. code-block:: bash
+
+  $ make freescale_imx8mmevk_defconfig
+  $ make
+
 Once finished successfully there is an ``output/image`` subfolder. Navigate into
 it and resize the SD card image to a power of two:
 
@@ -XXX,XX +XXX,XX @@ it and resize the SD card image to a power of two:
 
 Now that everything is prepared the machine can be started as follows:
 
+For i.MX 8M Plus EVK:
+
 .. code-block:: bash
 
   $ qemu-system-aarch64 -M imx8mp-evk \
@@ -XXX,XX +XXX,XX @@ Now that everything is prepared the machine can be started as follows:
       -append "root=/dev/mmcblk2p2" \
       -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2
 
+For i.MX 8M Mini EVK:
+
+.. code-block:: bash
+
+  $ qemu-system-aarch64 -M imx8mm-evk -smp 4 -m 2G \
+      -display none -serial null -serial stdio \
+      -kernel Image \
+      -dtb imx8mm-evk.dtb \
+      -append "root=/dev/mmcblk2p2" \
+      -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2
 
 KVM Acceleration
 ----------------
@@ -XXX,XX +XXX,XX @@ To enable hardware-assisted acceleration via KVM, append
 ``-accel kvm`` to the command line. While this speeds up performance
 significantly, be aware of the following limitations:
 
-* The ``imx8mp-evk`` machine is not included under the "virtualization use case"
-  of :doc:`QEMU's security policy </system/security>`. This means that you
-  should not trust that it can contain malicious guests, whether it is run
-  using TCG or KVM. If you don't trust your guests and you're relying on QEMU to
-  be the security boundary, you want to choose another machine such as ``virt``.
+* The ``imx8mp-evk`` and ``imx8mm-evk`` machines are not included
+  under the "virtualization use case" of :doc:`QEMU's security
+  policy </system/security>`.  This means that you should not trust that
+  it can contain malicious guests, whether it is run using TCG or KVM.
+  If you don't trust your guests and you're relying on QEMU to be the
+  security boundary, you want to choose another machine such as
+  ``virt``.
 * Rather than Cortex-A53 CPUs, the same CPU type as the host's will be used.
   This is a limitation of KVM and may not work with guests with a tight
   dependency on Cortex-A53.
diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/target-arm.rst
+++ b/docs/system/target-arm.rst
@@ -XXX,XX +XXX,XX @@ Board-specific documentation
    arm/imx25-pdk
    arm/mcimx6ul-evk
    arm/mcimx7d-sabre
-   arm/imx8mp-evk
+   arm/imx8m
    arm/orangepi
    arm/raspi
    arm/collie
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
     depends on TCG
     select FSL_IMX8MP
 
+config FSL_IMX8MM
+    bool
+    select ARM_GIC
+    select IMX
+
+config FSL_IMX8MM_EVK
+    bool
+    default y
+    depends on AARCH64
+    depends on TCG
+    select FSL_IMX8MM
+
 config ARM_SMMUV3_ACCEL
     bool
     depends on ARM_SMMUV3
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * i.MX 8MM SoC Implementation
+ *
+ * Based on hw/arm/fsl-imx6.c
+ *
+ * Copyright (c) 2025, NXP Semiconductors
+ * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * iMX8MM Reference Manual - https://www.nxp.com/products/i.MX8MMINI -> Documentation
+ */
+
+#include "qemu/osdep.h"
+#include "system/address-spaces.h"
+#include "hw/arm/bsa.h"
+#include "hw/arm/fsl-imx8mm.h"
+#include "hw/misc/unimp.h"
+#include "hw/core/boards.h"
+#include "system/kvm.h"
+#include "system/system.h"
+#include "target/arm/cpu.h"
+#include "target/arm/cpu-qom.h"
+#include "target/arm/kvm_arm.h"
+#include "qapi/error.h"
+#include "qobject/qlist.h"
+
+static const struct {
+    hwaddr addr;
+    size_t size;
+    const char *name;
+} fsl_imx8mm_memmap[] = {
+    [FSL_IMX8MM_RAM] = { FSL_IMX8MM_RAM_START, FSL_IMX8MM_RAM_SIZE_MAX, "ram" },
+    [FSL_IMX8MM_DDR_PHY_BROADCAST] = { 0x3dc00000, 4 * MiB, "ddr_phy_broadcast" },
+    [FSL_IMX8MM_DDR_PERF_MON] = { 0x3d800000, 4 * MiB, "ddr_perf_mon" },
+    [FSL_IMX8MM_DDR_CTL] = { 0x3d400000, 4 * MiB, "ddr_ctl" },
+    [FSL_IMX8MM_DDR_PHY] = { 0x3c000000, 16 * MiB, "ddr_phy" },
+    [FSL_IMX8MM_GIC_DIST] = { 0x38800000, 512 * KiB, "gic_dist" },
+    [FSL_IMX8MM_GIC_REDIST] = { 0x38880000, 512 * KiB, "gic_redist" },
+    [FSL_IMX8MM_VPU] = { 0x38340000, 2 * MiB, "vpu" },
+    [FSL_IMX8MM_VPU_BLK_CTRL] = { 0x38330000, 2 * MiB, "vpu_blk_ctrl" },
+    [FSL_IMX8MM_VPU_G2_DECODER] = { 0x38310000, 1 * MiB, "vpu_g2_decoder" },
+    [FSL_IMX8MM_VPU_G1_DECODER] = { 0x38300000, 1 * MiB, "vpu_g1_decoder" },
+    [FSL_IMX8MM_USB2_OTG] = { 0x32e50200, 0x200, "usb2_otg" },
+    [FSL_IMX8MM_USB2] = { 0x32e50000, 0x200, "usb2" },
+    [FSL_IMX8MM_USB1_OTG] = { 0x32e40200, 0x200, "usb1_otg" },
+    [FSL_IMX8MM_USB1] = { 0x32e40000, 0x200, "usb1" },
+    [FSL_IMX8MM_GPU2D] = { 0x38000000, 64 * KiB, "gpu2d" },
+    [FSL_IMX8MM_QSPI1_RX_BUFFER] = { 0x34000000, 32 * MiB, "qspi1_rx_buffer" },
+    [FSL_IMX8MM_PCIE1] = { 0x33800000, 4 * MiB, "pcie1" },
+    [FSL_IMX8MM_QSPI1_TX_BUFFER] = { 0x33008000, 32 * KiB, "qspi1_tx_buffer" },
+    [FSL_IMX8MM_APBH_DMA] = { 0x33000000, 32 * KiB, "apbh_dma" },
+
+    /* AIPS-4 Begin */
+    [FSL_IMX8MM_TZASC] = { 0x32f80000, 64 * KiB, "tzasc" },
+    [FSL_IMX8MM_PCIE_PHY1] = { 0x32f00000, 64 * KiB, "pcie_phy1" },
+    [FSL_IMX8MM_MEDIA_BLK_CTL] = { 0x32e28000, 256, "media_blk_ctl" },
+    [FSL_IMX8MM_LCDIF] = { 0x32e00000, 64 * KiB, "lcdif" },
+    [FSL_IMX8MM_MIPI_DSI] = { 0x32e10000, 64 * KiB, "mipi_dsi" },
+    [FSL_IMX8MM_MIPI_CSI] = { 0x32e30000, 64 * KiB, "mipi_csi" },
+    [FSL_IMX8MM_AIPS4_CONFIGURATION] = { 0x32df0000, 64 * KiB, "aips4_configuration" },
+    /* AIPS-4 End */
+
+    [FSL_IMX8MM_INTERCONNECT] = { 0x32700000, 1 * MiB, "interconnect" },
+
+    /* AIPS-3 Begin */
+    [FSL_IMX8MM_ENET1] = { 0x30be0000, 64 * KiB, "enet1" },
+    [FSL_IMX8MM_SDMA1] = { 0x30bd0000, 64 * KiB, "sdma1" },
+    [FSL_IMX8MM_QSPI] = { 0x30bb0000, 64 * KiB, "qspi" },
+    [FSL_IMX8MM_USDHC3] = { 0x30b60000, 64 * KiB, "usdhc3" },
+    [FSL_IMX8MM_USDHC2] = { 0x30b50000, 64 * KiB, "usdhc2" },
+    [FSL_IMX8MM_USDHC1] = { 0x30b40000, 64 * KiB, "usdhc1" },
+    [FSL_IMX8MM_SEMAPHORE_HS] = { 0x30ac0000, 64 * KiB, "semaphore_hs" },
+    [FSL_IMX8MM_MU_B] = { 0x30ab0000, 64 * KiB, "mu_b" },
+    [FSL_IMX8MM_MU_A] = { 0x30aa0000, 64 * KiB, "mu_a" },
+    [FSL_IMX8MM_UART4] = { 0x30a60000, 64 * KiB, "uart4" },
+    [FSL_IMX8MM_I2C4] = { 0x30a50000, 64 * KiB, "i2c4" },
+    [FSL_IMX8MM_I2C3] = { 0x30a40000, 64 * KiB, "i2c3" },
+    [FSL_IMX8MM_I2C2] = { 0x30a30000, 64 * KiB, "i2c2" },
+    [FSL_IMX8MM_I2C1] = { 0x30a20000, 64 * KiB, "i2c1" },
+    [FSL_IMX8MM_AIPS3_CONFIGURATION] = { 0x309f0000, 64 * KiB, "aips3_configuration" },
+    [FSL_IMX8MM_CAAM] = { 0x30900000, 256 * KiB, "caam" },
+    [FSL_IMX8MM_SPBA1] = { 0x308f0000, 64 * KiB, "spba1" },
+    [FSL_IMX8MM_UART2] = { 0x30890000, 64 * KiB, "uart2" },
+    [FSL_IMX8MM_UART3] = { 0x30880000, 64 * KiB, "uart3" },
+    [FSL_IMX8MM_UART1] = { 0x30860000, 64 * KiB, "uart1" },
+    [FSL_IMX8MM_ECSPI3] = { 0x30840000, 64 * KiB, "ecspi3" },
+    [FSL_IMX8MM_ECSPI2] = { 0x30830000, 64 * KiB, "ecspi2" },
+    [FSL_IMX8MM_ECSPI1] = { 0x30820000, 64 * KiB, "ecspi1" },
+    /* AIPS-3 End */
+
+    /* AIPS-2 Begin */
+    [FSL_IMX8MM_QOSC] = { 0x307f0000, 64 * KiB, "qosc" },
+    [FSL_IMX8MM_PERFMON2] = { 0x307d0000, 64 * KiB, "perfmon2" },
+    [FSL_IMX8MM_PERFMON1] = { 0x307c0000, 64 * KiB, "perfmon1" },
+    [FSL_IMX8MM_GPT4] = { 0x30700000, 64 * KiB, "gpt4" },
+    [FSL_IMX8MM_GPT5] = { 0x306f0000, 64 * KiB, "gpt5" },
+    [FSL_IMX8MM_GPT6] = { 0x306e0000, 64 * KiB, "gpt6" },
+    [FSL_IMX8MM_SYSCNT_CTRL] = { 0x306c0000, 64 * KiB, "syscnt_ctrl" },
+    [FSL_IMX8MM_SYSCNT_CMP] = { 0x306b0000, 64 * KiB, "syscnt_cmp" },
+    [FSL_IMX8MM_SYSCNT_RD] = { 0x306a0000, 64 * KiB, "syscnt_rd" },
+    [FSL_IMX8MM_PWM4] = { 0x30690000, 64 * KiB, "pwm4" },
+    [FSL_IMX8MM_PWM3] = { 0x30680000, 64 * KiB, "pwm3" },
+    [FSL_IMX8MM_PWM2] = { 0x30670000, 64 * KiB, "pwm2" },
+    [FSL_IMX8MM_PWM1] = { 0x30660000, 64 * KiB, "pwm1" },
+    [FSL_IMX8MM_AIPS2_CONFIGURATION] = { 0x305f0000, 64 * KiB, "aips2_configuration" },
+    /* AIPS-2 End */
+
+    /* AIPS-1 Begin */
+    [FSL_IMX8MM_CSU] = { 0x303e0000, 64 * KiB, "csu" },
+    [FSL_IMX8MM_RDC] = { 0x303d0000, 64 * KiB, "rdc" },
+    [FSL_IMX8MM_SEMAPHORE2] = { 0x303c0000, 64 * KiB, "semaphore2" },
+    [FSL_IMX8MM_SEMAPHORE1] = { 0x303b0000, 64 * KiB, "semaphore1" },
+    [FSL_IMX8MM_GPC] = { 0x303a0000, 64 * KiB, "gpc" },
+    [FSL_IMX8MM_SRC] = { 0x30390000, 64 * KiB, "src" },
+    [FSL_IMX8MM_CCM] = { 0x30380000, 64 * KiB, "ccm" },
+    [FSL_IMX8MM_SNVS_HP] = { 0x30370000, 64 * KiB, "snvs_hp" },
+    [FSL_IMX8MM_ANA_PLL] = { 0x30360000, 64 * KiB, "ana_pll" },
+    [FSL_IMX8MM_OCOTP_CTRL] = { 0x30350000, 64 * KiB, "ocotp_ctrl" },
+    [FSL_IMX8MM_IOMUXC_GPR] = { 0x30340000, 64 * KiB, "iomuxc_gpr" },
+    [FSL_IMX8MM_IOMUXC] = { 0x30330000, 64 * KiB, "iomuxc" },
+    [FSL_IMX8MM_GPT3] = { 0x302f0000, 64 * KiB, "gpt3" },
+    [FSL_IMX8MM_GPT2] = { 0x302e0000, 64 * KiB, "gpt2" },
+    [FSL_IMX8MM_GPT1] = { 0x302d0000, 64 * KiB, "gpt1" },
+    [FSL_IMX8MM_SDMA2] = { 0x302c0000, 64 * KiB, "sdma2" },
+    [FSL_IMX8MM_SDMA3] = { 0x302b0000, 64 * KiB, "sdma3" },
+    [FSL_IMX8MM_WDOG3] = { 0x302a0000, 64 * KiB, "wdog3" },
+    [FSL_IMX8MM_WDOG2] = { 0x30290000, 64 * KiB, "wdog2" },
+    [FSL_IMX8MM_WDOG1] = { 0x30280000, 64 * KiB, "wdog1" },
+    [FSL_IMX8MM_ANA_OSC] = { 0x30270000, 64 * KiB, "ana_osc" },
+    [FSL_IMX8MM_ANA_TSENSOR] = { 0x30260000, 64 * KiB, "ana_tsensor" },
+    [FSL_IMX8MM_GPIO5] = { 0x30240000, 64 * KiB, "gpio5" },
+    [FSL_IMX8MM_GPIO4] = { 0x30230000, 64 * KiB, "gpio4" },
+    [FSL_IMX8MM_GPIO3] = { 0x30220000, 64 * KiB, "gpio3" },
+    [FSL_IMX8MM_GPIO2] = { 0x30210000, 64 * KiB, "gpio2" },
+    [FSL_IMX8MM_GPIO1] = { 0x30200000, 64 * KiB, "gpio1" },
+    [FSL_IMX8MM_AIPS1_CONFIGURATION] = { 0x301f0000, 64 * KiB, "aips1_configuration" },
+    [FSL_IMX8MM_SAI6] = { 0x30060000, 64 * KiB, "sai6" },
+    [FSL_IMX8MM_SAI5] = { 0x30050000, 64 * KiB, "sai5" },
+    [FSL_IMX8MM_SAI3] = { 0x30030000, 64 * KiB, "sai3" },
+    [FSL_IMX8MM_SAI2] = { 0x30020000, 64 * KiB, "sai2" },
+    [FSL_IMX8MM_SAI1] = { 0x30010000, 64 * KiB, "sai1" },
+
+    /* AIPS-1 End */
+
+    [FSL_IMX8MM_A53_DAP] = { 0x28000000, 16 * MiB, "a53_dap" },
+    [FSL_IMX8MM_PCIE1_MEM] = { 0x18000000, 128 * MiB, "pcie1_mem" },
+    [FSL_IMX8MM_QSPI_MEM] = { 0x08000000, 256 * MiB, "qspi_mem" },
+    [FSL_IMX8MM_OCRAM] = { 0x00900000, 256 * KiB, "ocram" },
+    [FSL_IMX8MM_TCM_DTCM] = { 0x00800000, 128 * KiB, "tcm_dtcm" },
+    [FSL_IMX8MM_TCM_ITCM] = { 0x007e0000, 128 * KiB, "tcm_itcm" },
+    [FSL_IMX8MM_OCRAM_S] = { 0x00180000, 32 * KiB, "ocram_s" },
+    [FSL_IMX8MM_CAAM_MEM] = { 0x00100000, 32 * KiB, "caam_mem" },
+    [FSL_IMX8MM_BOOT_ROM_PROTECTED] = { 0x0003f000, 4 * KiB, "boot_rom_protected" },
+    [FSL_IMX8MM_BOOT_ROM] = { 0x00000000, 252 * KiB, "boot_rom" },
+};
+
+static void fsl_imx8mm_init(Object *obj)
+{
+    MachineState *ms = MACHINE(qdev_get_machine());
+    FslImx8mmState *s = FSL_IMX8MM(obj);
+    const char *cpu_type = ms->cpu_type ?: ARM_CPU_TYPE_NAME("cortex-a53");
+    int i;
+
+    for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX8MM_NUM_CPUS); i++) {
+        g_autofree char *name = g_strdup_printf("cpu%d", i);
+        object_initialize_child(obj, name, &s->cpu[i], cpu_type);
+    }
+
+    object_initialize_child(obj, "gic", &s->gic, gicv3_class_name());
+
+    for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
+        g_autofree char *name = g_strdup_printf("uart%d", i + 1);
+        object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
+    }
+
+}
+
+static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
+{
+    MachineState *ms = MACHINE(qdev_get_machine());
+    FslImx8mmState *s = FSL_IMX8MM(dev);
+    DeviceState *gicdev = DEVICE(&s->gic);
+    int i;
+
+    if (ms->smp.cpus > FSL_IMX8MM_NUM_CPUS) {
+        error_setg(errp, "%s: Only %d CPUs are supported (%d requested)",
+                   TYPE_FSL_IMX8MM, FSL_IMX8MM_NUM_CPUS, ms->smp.cpus);
+        return;
+    }
+
+    /* CPUs */
+    for (i = 0; i < ms->smp.cpus; i++) {
+        /* On uniprocessor, the CBAR is set to 0 */
+        if (ms->smp.cpus > 1 &&
+                object_property_find(OBJECT(&s->cpu[i]), "reset-cbar")) {
+            object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar",
+                                    fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr,
+                                    &error_abort);
+        }
+
+        /*
+         * CNTFID0 base frequency in Hz of system counter
+         */
+        object_property_set_int(OBJECT(&s->cpu[i]), "cntfrq", 8000000,
+                                &error_abort);
+
+        if (object_property_find(OBJECT(&s->cpu[i]), "has_el2")) {
+            object_property_set_bool(OBJECT(&s->cpu[i]), "has_el2",
+                                     !kvm_enabled(), &error_abort);
+        }
+
+        if (object_property_find(OBJECT(&s->cpu[i]), "has_el3")) {
+            object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3",
+                                     !kvm_enabled(), &error_abort);
+        }
+
+        if (i) {
+            /*
+             * Secondary CPUs start in powered-down state (and can be
+             * powered up via the SRC system reset controller)
+             */
+            object_property_set_bool(OBJECT(&s->cpu[i]), "start-powered-off",
+                                     true, &error_abort);
+        }
+
+        if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) {
+            return;
+        }
+    }
+
+    /* GIC */
+    {
+        SysBusDevice *gicsbd = SYS_BUS_DEVICE(&s->gic);
+        QList *redist_region_count;
+        bool pmu = object_property_get_bool(OBJECT(first_cpu), "pmu", NULL);
+
+        qdev_prop_set_uint32(gicdev, "num-cpu", ms->smp.cpus);
+        qdev_prop_set_uint32(gicdev, "num-irq",
+                             FSL_IMX8MM_NUM_IRQS + GIC_INTERNAL);
+        redist_region_count = qlist_new();
+        qlist_append_int(redist_region_count, ms->smp.cpus);
+        qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count);
+        object_property_set_link(OBJECT(&s->gic), "sysmem",
+                                 OBJECT(get_system_memory()), &error_fatal);
+        if (!sysbus_realize(gicsbd, errp)) {
+            return;
+        }
+        sysbus_mmio_map(gicsbd, 0, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr);
+        sysbus_mmio_map(gicsbd, 1, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_REDIST].addr);
+
+        /*
+         * Wire the outputs from each CPU's generic timer and the GICv3
+         * maintenance interrupt signal to the appropriate GIC PPI inputs, and
+         * the GIC's IRQ/FIQ interrupt outputs to the CPU's inputs.
+         */
+        for (i = 0; i < ms->smp.cpus; i++) {
+            DeviceState *cpudev = DEVICE(&s->cpu[i]);
+            int intidbase = FSL_IMX8MM_NUM_IRQS + i * GIC_INTERNAL;
+            qemu_irq irq;
+
+            /*
+             * Mapping from the output timer irq lines from the CPU to the
+             * GIC PPI inputs.
+             */
+            static const int timer_irqs[] = {
+                [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ,
+                [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
+                [GTIMER_HYP]  = ARCH_TIMER_NS_EL2_IRQ,
+                [GTIMER_SEC]  = ARCH_TIMER_S_EL1_IRQ,
+            };
+
+            for (int j = 0; j < ARRAY_SIZE(timer_irqs); j++) {
+                irq = qdev_get_gpio_in(gicdev, intidbase + timer_irqs[j]);
+                qdev_connect_gpio_out(cpudev, j, irq);
+            }
+
+            irq = qdev_get_gpio_in(gicdev, intidbase + ARCH_GIC_MAINT_IRQ);
+            qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt",
+                                        0, irq);
+
+            irq = qdev_get_gpio_in(gicdev, intidbase + VIRTUAL_PMU_IRQ);
+            qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, irq);
+
+            sysbus_connect_irq(gicsbd, i,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+            sysbus_connect_irq(gicsbd, i + ms->smp.cpus,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
+            sysbus_connect_irq(gicsbd, i + 2 * ms->smp.cpus,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
+            sysbus_connect_irq(gicsbd, i + 3 * ms->smp.cpus,
+                               qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
+
+            if (kvm_enabled()) {
+                if (pmu) {
+                    assert(arm_feature(&s->cpu[i].env, ARM_FEATURE_PMU));
+                    if (kvm_irqchip_in_kernel()) {
+                        kvm_arm_pmu_set_irq(&s->cpu[i], VIRTUAL_PMU_IRQ);
+                    }
+                    kvm_arm_pmu_init(&s->cpu[i]);
+                }
+            }
+        }
+    }
+
+    /* UARTs */
+    for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } serial_table[FSL_IMX8MM_NUM_UARTS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART1].addr, FSL_IMX8MM_UART1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART2].addr, FSL_IMX8MM_UART2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART3].addr, FSL_IMX8MM_UART3_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_UART4].addr, FSL_IMX8MM_UART4_IRQ },
+        };
+
+        qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i));
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0,
+                           qdev_get_gpio_in(gicdev, serial_table[i].irq));
+    }
+
+    /* On-Chip RAM */
+    if (!memory_region_init_ram(&s->ocram, OBJECT(dev), "imx8mm.ocram",
+                                fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].size,
+                                errp)) {
+        return;
+    }
+    memory_region_add_subregion(get_system_memory(),
+                                fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
+                                &s->ocram);
+
+    /* Unimplemented devices */
+    for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
+        switch (i) {
+        case FSL_IMX8MM_GIC_DIST:
+        case FSL_IMX8MM_GIC_REDIST:
+        case FSL_IMX8MM_RAM:
+        case FSL_IMX8MM_OCRAM:
+        case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
+            /* device implemented and treated above */
+            break;
+
+        default:
+            create_unimplemented_device(fsl_imx8mm_memmap[i].name,
+                                        fsl_imx8mm_memmap[i].addr,
+                                        fsl_imx8mm_memmap[i].size);
+            break;
+        }
+    }
+}
+
+static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(oc);
+
+    dc->realize = fsl_imx8mm_realize;
+
+    dc->desc = "i.MX 8MM SoC";
+}
+
+static const TypeInfo fsl_imx8mm_types[] = {
+    {
+        .name = TYPE_FSL_IMX8MM,
+        .parent = TYPE_SYS_BUS_DEVICE,
+        .instance_size = sizeof(FslImx8mmState),
+        .instance_init = fsl_imx8mm_init,
+        .class_init = fsl_imx8mm_class_init,
+    },
+};
+
+DEFINE_TYPES(fsl_imx8mm_types)
diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/arm/imx8mm-evk.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * NXP i.MX 8MM Evaluation Kit System Emulation
+ *
+ * Copyright (c) 2025, NXP Semiconductors
+ * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "system/address-spaces.h"
+#include "hw/arm/boot.h"
+#include "hw/arm/fsl-imx8mm.h"
+#include "hw/arm/machines-qom.h"
+#include "hw/core/boards.h"
+#include "hw/core/qdev-properties.h"
+#include "system/kvm.h"
+#include "system/qtest.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+#include <libfdt.h>
+
+static void imx8mm_evk_modify_dtb(const struct arm_boot_info *info, void *fdt)
+{
+    int i, offset;
+
+    /* Temporarily disable following nodes until they are implemented */
+    const char *nodes_to_remove[] = {
+        "nxp,imx8mm-fspi",
+        "fsl,imx8mm-mipi-csi",
+        "fsl,imx8mm-mipi-dsim"
+    };
+
+    for (i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) {
+        const char *dev_str = nodes_to_remove[i];
+
+        offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
+        while (offset >= 0) {
+            fdt_nop_node(fdt, offset);
+            offset = fdt_node_offset_by_compatible(fdt, offset, dev_str);
+        }
+    }
+
+    /* Remove cpu-idle-states property from CPU nodes */
+    offset = fdt_node_offset_by_compatible(fdt, -1, "arm,cortex-a53");
+    while (offset >= 0) {
+        fdt_nop_property(fdt, offset, "cpu-idle-states");
+        offset = fdt_node_offset_by_compatible(fdt, offset, "arm,cortex-a53");
+    }
+
+    if (kvm_enabled()) {
+        /* Use system counter frequency from host CPU to fix time in guest */
+        offset = fdt_node_offset_by_compatible(fdt, -1, "arm,armv8-timer");
+        while (offset >= 0) {
+            fdt_nop_property(fdt, offset, "clock-frequency");
+            offset = fdt_node_offset_by_compatible(fdt, offset, "arm,armv8-timer");
+        }
+    }
+}
+
+static void imx8mm_evk_init(MachineState *machine)
+{
+    static struct arm_boot_info boot_info;
+    FslImx8mmState *s;
+
+    if (machine->ram_size > FSL_IMX8MM_RAM_SIZE_MAX) {
+        error_report("RAM size " RAM_ADDR_FMT " above max supported (%08" PRIx64 ")",
+                     machine->ram_size, FSL_IMX8MM_RAM_SIZE_MAX);
+        exit(1);
+    }
+
+    boot_info = (struct arm_boot_info) {
+        .loader_start = FSL_IMX8MM_RAM_START,
+        .board_id = -1,
+        .ram_size = machine->ram_size,
+        .psci_conduit = QEMU_PSCI_CONDUIT_SMC,
+        .modify_dtb = imx8mm_evk_modify_dtb,
+    };
+
+    s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine),
+                                         "soc", &error_fatal, NULL));
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal);
+
+    memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START,
+                                machine->ram);
+
+    if (!qtest_enabled()) {
+        arm_load_kernel(&s->cpu[0], machine, &boot_info);
+    }
+}
+
+static const char *imx8mm_evk_get_default_cpu_type(const MachineState *ms)
+{
+    if (kvm_enabled()) {
+        return ARM_CPU_TYPE_NAME("host");
+    }
+
+    return ARM_CPU_TYPE_NAME("cortex-a53");
+}
+
+static void imx8mm_evk_machine_init(MachineClass *mc)
+{
+    mc->desc = "NXP i.MX 8MM EVK Board";
+    mc->init = imx8mm_evk_init;
+    mc->max_cpus = FSL_IMX8MM_NUM_CPUS;
+    mc->default_cpus = FSL_IMX8MM_NUM_CPUS;
+    mc->default_ram_size = 2 * GiB;
+    mc->default_ram_id = "imx8mm-evk.ram";
+    mc->get_default_cpu_type = imx8mm_evk_get_default_cpu_type;
+}
+
+DEFINE_MACHINE_AARCH64("imx8mm-evk", imx8mm_evk_machine_init)
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -XXX,XX +XXX,XX @@ arm_common_ss.add(when: 'CONFIG_ARMSSE', if_true: files('armsse.c'))
 arm_common_ss.add(when: 'CONFIG_FSL_IMX7', if_true: files('fsl-imx7.c', 'mcimx7d-sabre.c'))
 arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP', if_true: files('fsl-imx8mp.c'))
 arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP_EVK', if_true: files('imx8mp-evk.c'))
+arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM', if_true: files('fsl-imx8mm.c'))
+arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM_EVK', if_true: files('imx8mm-evk.c'))
 arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmuv3.c'))
 arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3_ACCEL', if_true: files('smmuv3-accel.c'))
 stub_ss.add(files('smmuv3-accel-stubs.c'))
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * i.MX 8MM SoC Definitions
+ *
+ * Copyright (c) 2025, NXP Semiconductors
+ * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef FSL_IMX8MM_H
+#define FSL_IMX8MM_H
+
+#include "cpu.h"
+#include "hw/char/imx_serial.h"
+#include "hw/intc/arm_gicv3_common.h"
+#include "qom/object.h"
+#include "qemu/units.h"
+
+#define TYPE_FSL_IMX8MM "fsl-imx8mm"
+OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
+
+#define FSL_IMX8MM_RAM_START        0x40000000
+#define FSL_IMX8MM_RAM_SIZE_MAX     (4 * GiB)
+
+enum FslImx8mmConfiguration {
+    FSL_IMX8MM_NUM_CPUS         = 4,
+    FSL_IMX8MM_NUM_IRQS         = 128,
+    FSL_IMX8MM_NUM_UARTS        = 4,
+};
+
+struct FslImx8mmState {
+    SysBusDevice   parent_obj;
+
+    ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
+    GICv3State         gic;
+    IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
+    MemoryRegion ocram;
+};
+
+enum FslImx8mmMemoryRegions {
+    FSL_IMX8MM_A53_DAP,
+    FSL_IMX8MM_AIPS1_CONFIGURATION,
+    FSL_IMX8MM_AIPS2_CONFIGURATION,
+    FSL_IMX8MM_AIPS3_CONFIGURATION,
+    FSL_IMX8MM_AIPS4_CONFIGURATION,
+    FSL_IMX8MM_ANA_OSC,
+    FSL_IMX8MM_ANA_PLL,
+    FSL_IMX8MM_ANA_TSENSOR,
+    FSL_IMX8MM_APBH_DMA,
+    FSL_IMX8MM_BOOT_ROM,
+    FSL_IMX8MM_BOOT_ROM_PROTECTED,
+    FSL_IMX8MM_CAAM,
+    FSL_IMX8MM_CAAM_MEM,
+    FSL_IMX8MM_CCM,
+    FSL_IMX8MM_CSU,
+    FSL_IMX8MM_DDR_CTL,
+    FSL_IMX8MM_DDR_PERF_MON,
+    FSL_IMX8MM_DDR_PHY,
+    FSL_IMX8MM_DDR_PHY_BROADCAST,
+    FSL_IMX8MM_ECSPI1,
+    FSL_IMX8MM_ECSPI2,
+    FSL_IMX8MM_ECSPI3,
+    FSL_IMX8MM_ENET1,
+    FSL_IMX8MM_GIC_DIST,
+    FSL_IMX8MM_GIC_REDIST,
+    FSL_IMX8MM_GPC,
+    FSL_IMX8MM_GPIO1,
+    FSL_IMX8MM_GPIO2,
+    FSL_IMX8MM_GPIO3,
+    FSL_IMX8MM_GPIO4,
+    FSL_IMX8MM_GPIO5,
+    FSL_IMX8MM_GPT1,
+    FSL_IMX8MM_GPT2,
+    FSL_IMX8MM_GPT3,
+    FSL_IMX8MM_GPT4,
+    FSL_IMX8MM_GPT5,
+    FSL_IMX8MM_GPT6,
+    FSL_IMX8MM_GPU2D,
+    FSL_IMX8MM_I2C1,
+    FSL_IMX8MM_I2C2,
+    FSL_IMX8MM_I2C3,
+    FSL_IMX8MM_I2C4,
+    FSL_IMX8MM_INTERCONNECT,
+    FSL_IMX8MM_IOMUXC,
+    FSL_IMX8MM_IOMUXC_GPR,
+    FSL_IMX8MM_MEDIA_BLK_CTL,
+    FSL_IMX8MM_LCDIF,
+    FSL_IMX8MM_MIPI_CSI,
+    FSL_IMX8MM_MIPI_DSI,
+    FSL_IMX8MM_MU_A,
+    FSL_IMX8MM_MU_B,
+    FSL_IMX8MM_OCOTP_CTRL,
+    FSL_IMX8MM_OCRAM,
+    FSL_IMX8MM_OCRAM_S,
+    FSL_IMX8MM_PCIE1,
+    FSL_IMX8MM_PCIE1_MEM,
+    FSL_IMX8MM_PCIE_PHY1,
+    FSL_IMX8MM_PERFMON1,
+    FSL_IMX8MM_PERFMON2,
+    FSL_IMX8MM_PWM1,
+    FSL_IMX8MM_PWM2,
+    FSL_IMX8MM_PWM3,
+    FSL_IMX8MM_PWM4,
+    FSL_IMX8MM_QOSC,
+    FSL_IMX8MM_QSPI,
+    FSL_IMX8MM_QSPI1_RX_BUFFER,
+    FSL_IMX8MM_QSPI1_TX_BUFFER,
+    FSL_IMX8MM_QSPI_MEM,
+    FSL_IMX8MM_RAM,
+    FSL_IMX8MM_RDC,
+    FSL_IMX8MM_SAI1,
+    FSL_IMX8MM_SAI2,
+    FSL_IMX8MM_SAI3,
+    FSL_IMX8MM_SAI5,
+    FSL_IMX8MM_SAI6,
+    FSL_IMX8MM_SDMA1,
+    FSL_IMX8MM_SDMA2,
+    FSL_IMX8MM_SDMA3,
+    FSL_IMX8MM_SEMAPHORE1,
+    FSL_IMX8MM_SEMAPHORE2,
+    FSL_IMX8MM_SEMAPHORE_HS,
+    FSL_IMX8MM_SNVS_HP,
+    FSL_IMX8MM_SPBA1,
+    FSL_IMX8MM_SRC,
+    FSL_IMX8MM_SYSCNT_CMP,
+    FSL_IMX8MM_SYSCNT_CTRL,
+    FSL_IMX8MM_SYSCNT_RD,
+    FSL_IMX8MM_TCM_DTCM,
+    FSL_IMX8MM_TCM_ITCM,
+    FSL_IMX8MM_TZASC,
+    FSL_IMX8MM_UART1,
+    FSL_IMX8MM_UART2,
+    FSL_IMX8MM_UART3,
+    FSL_IMX8MM_UART4,
+    FSL_IMX8MM_USB1,
+    FSL_IMX8MM_USB2,
+    FSL_IMX8MM_USB1_OTG,
+    FSL_IMX8MM_USB2_OTG,
+    FSL_IMX8MM_USDHC1,
+    FSL_IMX8MM_USDHC2,
+    FSL_IMX8MM_USDHC3,
+    FSL_IMX8MM_VPU,
+    FSL_IMX8MM_VPU_BLK_CTRL,
+    FSL_IMX8MM_VPU_G1_DECODER,
+    FSL_IMX8MM_VPU_G2_DECODER,
+    FSL_IMX8MM_WDOG1,
+    FSL_IMX8MM_WDOG2,
+    FSL_IMX8MM_WDOG3,
+};
+
+enum FslImx8mmIrqs {
+    FSL_IMX8MM_UART1_IRQ    = 26,
+    FSL_IMX8MM_UART2_IRQ    = 27,
+    FSL_IMX8MM_UART3_IRQ    = 28,
+    FSL_IMX8MM_UART4_IRQ    = 29,
+};
+
+#endif /* FSL_IMX8MM_H */
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Add configurable properties for register reset values that differ
between i.MX 8M variants (Plus, Mini, etc.). This allows the same
device implementation to be shared across multiple SoCs.

Properties added:
- arm-pll-fdiv-ctl0-reset: ARM PLL divider control reset value

Default value is set to match i.MX 8MP reset value (0x000FA031).
This can be overridden in the variant like iMX8MM with its own
reset value.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/misc/imx8mp_analog.c         | 12 +++++++++++-
 include/hw/misc/imx8mp_analog.h |  3 +++
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/hw/misc/imx8mp_analog.c b/hw/misc/imx8mp_analog.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/imx8mp_analog.c
+++ b/hw/misc/imx8mp_analog.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/log.h"
 
 #include "hw/misc/imx8mp_analog.h"
+#include "hw/core/qdev-properties.h"
 #include "migration/vmstate.h"
 
 #define ANALOG_PLL_LOCK BIT(31)
@@ -XXX,XX +XXX,XX @@ static void imx8mp_analog_reset(DeviceState *dev)
     s->analog[ANALOG_VPU_PLL_LOCKD_CTRL] = 0x0010003f;
     s->analog[ANALOG_VPU_PLL_MNIT_CTRL] = 0x00280081;
     s->analog[ANALOG_ARM_PLL_GEN_CTRL] = 0x00000810;
-    s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = 0x000fa031;
+
+    /* Use property value instead of hardcoded */
+    s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = s->arm_pll_fdiv_ctl0_reset;
+
     s->analog[ANALOG_ARM_PLL_LOCKD_CTRL] = 0x0010003f;
     s->analog[ANALOG_ARM_PLL_MNIT_CTRL] = 0x00280081;
     s->analog[ANALOG_SYS_PLL1_GEN_CTRL] = 0x0aaaa810;
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription imx8mp_analog_vmstate = {
     },
 };
 
+static const Property imx8mp_analog_properties[] = {
+    DEFINE_PROP_UINT32("arm-pll-fdiv-ctl0-reset", IMX8MPAnalogState,
+                       arm_pll_fdiv_ctl0_reset, 0x000fa031), /* imx8mp default */
+};
+
 static void imx8mp_analog_class_init(ObjectClass *klass, const void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
     device_class_set_legacy_reset(dc, imx8mp_analog_reset);
+    device_class_set_props(dc, imx8mp_analog_properties);
     dc->vmsd  = &imx8mp_analog_vmstate;
     dc->desc  = "i.MX 8M Plus Analog Module";
 }
diff --git a/include/hw/misc/imx8mp_analog.h b/include/hw/misc/imx8mp_analog.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/misc/imx8mp_analog.h
+++ b/include/hw/misc/imx8mp_analog.h
@@ -XXX,XX +XXX,XX @@ struct IMX8MPAnalogState {
     } mmio;
 
     uint32_t analog[ANALOG_MAX];
+
+    /* Property for variant-specific reset values */
+    uint32_t arm_pll_fdiv_ctl0_reset;
 };
 
 #endif /* IMX8MP_ANALOG_H */
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Add the Analog IP to i.MX8MM SoC. iMX8MM and i.MX8MP uses
the same Analog IP so the analog ip source will be shared.

The ARM PLL divider control register (arm-pll-fdiv-ctl0) has
a different reset value on i.MX8MM (0x000fa030) compared to
i.MX8MP (0x000fa031). So iMX8MM will be overriding this property
with its own reset-value.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 12 ++++++++++++
 include/hw/arm/fsl-imx8mm.h |  2 ++
 3 files changed, 15 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
 config FSL_IMX8MM
     bool
     select ARM_GIC
+    select FSL_IMX8MP_ANALOG
     select IMX
 
 config FSL_IMX8MM_EVK
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
 
     object_initialize_child(obj, "gic", &s->gic, gicv3_class_name());
 
+    object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG);
+
     for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
         g_autofree char *name = g_strdup_printf("uart%d", i + 1);
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         }
     }
 
+    /* Analog */
+    object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset",
+                            0x000fa030, &error_abort);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->analog), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->analog), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_ANA_PLL].addr);
+
     /* UARTs */
     for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     /* Unimplemented devices */
     for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
         switch (i) {
+        case FSL_IMX8MM_ANA_PLL:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "cpu.h"
 #include "hw/char/imx_serial.h"
 #include "hw/intc/arm_gicv3_common.h"
+#include "hw/misc/imx8mp_analog.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMX8MPAnalogState  analog;
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
 };
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Add the Clock Control Module (CCM) device to i.MX8MM SoC.
The CCM implementation is shared with i.MX8MP as the register
layout is identical between the two variants.Hence iMX8MM will
be using the source of iMX8MP CCM.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 10 ++++++++++
 include/hw/arm/fsl-imx8mm.h |  2 ++
 3 files changed, 13 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     bool
     select ARM_GIC
     select FSL_IMX8MP_ANALOG
+    select FSL_IMX8MP_CCM
     select IMX
 
 config FSL_IMX8MM_EVK
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
 
     object_initialize_child(obj, "gic", &s->gic, gicv3_class_name());
 
+    object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX8MP_CCM);
+
     object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG);
 
     for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         }
     }
 
+    /* CCM */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->ccm), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_CCM].addr);
+
     /* Analog */
     object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset",
                             0x000fa030, &error_abort);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
         switch (i) {
         case FSL_IMX8MM_ANA_PLL:
+        case FSL_IMX8MM_CCM:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/char/imx_serial.h"
 #include "hw/intc/arm_gicv3_common.h"
 #include "hw/misc/imx8mp_analog.h"
+#include "hw/misc/imx8mp_ccm.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

SNVS contains an RTC which allows Linux to deal correctly with time

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of SD/MMC cards through a virtual SDHCI interface
The emulated SDHCI controller allows guest OS to use emulated storage as
a standard block device.
This will allow running the images such as those generated
by Buildroot.

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 25 +++++++++++++++++++++++++
 hw/arm/imx8mm-evk.c         | 17 +++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  7 +++++++
 4 files changed, 50 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
+    select SDHCI
 
 config FSL_IMX8MM_EVK
     bool
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
+        g_autofree char *name = g_strdup_printf("usdhc%d", i + 1);
+        object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
+    }
 }
 
 static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* USDHCs */
+    for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } usdhc_table[FSL_IMX8MM_NUM_USDHCS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC1].addr, FSL_IMX8MM_USDHC1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC2].addr, FSL_IMX8MM_USDHC2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC3].addr, FSL_IMX8MM_USDHC3_IRQ },
+        };
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->usdhc[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, usdhc_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0,
+                           qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
+    }
+
     /* SNVS */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_OCRAM:
         case FSL_IMX8MM_SNVS_HP:
         case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
+        case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3:
             /* device implemented and treated above */
             break;
 
diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/imx8mm-evk.c
+++ b/hw/arm/imx8mm-evk.c
@@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine)
     memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START,
                                 machine->ram);
 
+    for (int i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
+        BusState *bus;
+        DeviceState *carddev;
+        BlockBackend *blk;
+        DriveInfo *di = drive_get(IF_SD, i, 0);
+
+        if (!di) {
+            continue;
+        }
+
+        blk = blk_by_legacy_dinfo(di);
+        bus = qdev_get_child_bus(DEVICE(&s->usdhc[i]), "sd-bus");
+        carddev = qdev_new(TYPE_SD_CARD);
+        qdev_prop_set_drive_err(carddev, "drive", blk, &error_fatal);
+        qdev_realize_and_unref(carddev, bus, &error_fatal);
+    }
+
     if (!qtest_enabled()) {
         arm_load_kernel(&s->cpu[0], machine, &boot_info);
     }
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
+#include "hw/sd/sdhci.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
+    FSL_IMX8MM_NUM_USDHCS       = 3,
 };
 
 struct FslImx8mmState {
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX7SNVSState      snvs;
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
+    SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmMemoryRegions {
 };
 
 enum FslImx8mmIrqs {
+    FSL_IMX8MM_USDHC1_IRQ   = 22,
+    FSL_IMX8MM_USDHC2_IRQ   = 23,
+    FSL_IMX8MM_USDHC3_IRQ   = 24,
+
     FSL_IMX8MM_UART1_IRQ    = 26,
     FSL_IMX8MM_UART2_IRQ    = 27,
     FSL_IMX8MM_UART3_IRQ    = 28,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

This enables support for Designware PCI Express Controller emulation
It provides a controlled environment to debug the linux pci subsystem

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  3 +++
 hw/arm/fsl-imx8mm.c         | 30 ++++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h | 10 ++++++++++
 3 files changed, 43 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
 
 config FSL_IMX8MM
     bool
+    imply PCI_DEVICES
     select ARM_GIC
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
     select SDHCI
+    select PCI_EXPRESS_DESIGNWARE
+    select PCI_EXPRESS_FSL_IMX8M_PHY
 
 config FSL_IMX8MM_EVK
     bool
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         g_autofree char *name = g_strdup_printf("usdhc%d", i + 1);
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
     }
+
+    object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
+    object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
+                            TYPE_FSL_IMX8M_PCIE_PHY);
 }
 
 static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0,
                     fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr);
 
+    /* PCIe */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_PCIE1].addr);
+
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 0,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTA_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 1,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTB_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 2,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTC_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTD_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 4,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_MSI_IRQ));
+
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_phy), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie_phy), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_PCIE_PHY1].addr);
+
     /* Unimplemented devices */
     for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
         switch (i) {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_CCM:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
+        case FSL_IMX8MM_PCIE1:
+        case FSL_IMX8MM_PCIE_PHY1:
         case FSL_IMX8MM_RAM:
         case FSL_IMX8MM_OCRAM:
         case FSL_IMX8MM_SNVS_HP:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
+#include "hw/pci-host/designware.h"
+#include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
 #include "qom/object.h"
 #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
+    DesignwarePCIEHost pcie;
+    FslImx8mPciePhyState   pcie_phy;
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART2_IRQ    = 27,
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
+
+    FSL_IMX8MM_PCI_INTA_IRQ = 122,
+    FSL_IMX8MM_PCI_INTB_IRQ = 123,
+    FSL_IMX8MM_PCI_INTC_IRQ = 124,
+    FSL_IMX8MM_PCI_INTD_IRQ = 125,
+    FSL_IMX8MM_PCI_MSI_IRQ  = 127,
 };
 
 #endif /* FSL_IMX8MM_H */
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Enabled GPIO controller emulation
Also updated the GPIO IRQ lines of iMX8MM

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/fsl-imx8mm.c         | 54 +++++++++++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h | 14 ++++++++++
 2 files changed, 68 insertions(+)

diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
+        g_autofree char *name = g_strdup_printf("gpio%d", i + 1);
+        object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO);
+    }
+
     for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
         g_autofree char *name = g_strdup_printf("usdhc%d", i + 1);
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* GPIOs */
+    for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq_low;
+            unsigned int irq_high;
+        } gpio_table[FSL_IMX8MM_NUM_GPIOS] = {
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO1].addr,
+                FSL_IMX8MM_GPIO1_LOW_IRQ,
+                FSL_IMX8MM_GPIO1_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO2].addr,
+                FSL_IMX8MM_GPIO2_LOW_IRQ,
+                FSL_IMX8MM_GPIO2_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO3].addr,
+                FSL_IMX8MM_GPIO3_LOW_IRQ,
+                FSL_IMX8MM_GPIO3_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO4].addr,
+                FSL_IMX8MM_GPIO4_LOW_IRQ,
+                FSL_IMX8MM_GPIO4_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO5].addr,
+                FSL_IMX8MM_GPIO5_LOW_IRQ,
+                FSL_IMX8MM_GPIO5_HIGH_IRQ
+            },
+        };
+        object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true,
+                                 &error_abort);
+        object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq",
+                                 true, &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0,
+                           qdev_get_gpio_in(gicdev, gpio_table[i].irq_low));
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1,
+                           qdev_get_gpio_in(gicdev, gpio_table[i].irq_high));
+    }
+
     /* USDHCs */
     for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_CCM:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
+        case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 
 #include "cpu.h"
 #include "hw/char/imx_serial.h"
+#include "hw/gpio/imx_gpio.h"
 #include "hw/intc/arm_gicv3_common.h"
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
@@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
 
 enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
+    FSL_IMX8MM_NUM_GPIOS        = 5,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
     FSL_IMX8MM_NUM_USDHCS       = 3,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMXGPIOState       gpio[FSL_IMX8MM_NUM_GPIOS];
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMX7SNVSState      snvs;
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
 
+    FSL_IMX8MM_GPIO1_LOW_IRQ  = 64,
+    FSL_IMX8MM_GPIO1_HIGH_IRQ = 65,
+    FSL_IMX8MM_GPIO2_LOW_IRQ  = 66,
+    FSL_IMX8MM_GPIO2_HIGH_IRQ = 67,
+    FSL_IMX8MM_GPIO3_LOW_IRQ  = 68,
+    FSL_IMX8MM_GPIO3_HIGH_IRQ = 69,
+    FSL_IMX8MM_GPIO4_LOW_IRQ  = 70,
+    FSL_IMX8MM_GPIO4_HIGH_IRQ = 71,
+    FSL_IMX8MM_GPIO5_LOW_IRQ  = 72,
+    FSL_IMX8MM_GPIO5_HIGH_IRQ = 73,
+
     FSL_IMX8MM_PCI_INTA_IRQ = 122,
     FSL_IMX8MM_PCI_INTB_IRQ = 123,
     FSL_IMX8MM_PCI_INTC_IRQ = 124,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

This can be used to test and debug I2C device drivers.
Added I2C interrupts

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  2 ++
 hw/arm/fsl-imx8mm.c         | 27 +++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  8 ++++++++
 3 files changed, 37 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK
 config FSL_IMX8MM
     bool
     imply PCI_DEVICES
+    imply I2C_DEVICES
     select ARM_GIC
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
+    select IMX_I2C
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
+        g_autofree char *name = g_strdup_printf("i2c%d", i + 1);
+        object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C);
+    }
+
     for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
         g_autofree char *name = g_strdup_printf("gpio%d", i + 1);
         object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* I2Cs */
+    for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } i2c_table[FSL_IMX8MM_NUM_I2CS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C1].addr, FSL_IMX8MM_I2C1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C2].addr, FSL_IMX8MM_I2C2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C3].addr, FSL_IMX8MM_I2C3_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_I2C4].addr, FSL_IMX8MM_I2C4_IRQ },
+        };
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0,
+                           qdev_get_gpio_in(gicdev, i2c_table[i].irq));
+    }
+
     /* GPIOs */
     for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
+        case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "cpu.h"
 #include "hw/char/imx_serial.h"
 #include "hw/gpio/imx_gpio.h"
+#include "hw/i2c/imx_i2c.h"
 #include "hw/intc/arm_gicv3_common.h"
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
@@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
 enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
     FSL_IMX8MM_NUM_GPIOS        = 5,
+    FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
     FSL_IMX8MM_NUM_USDHCS       = 3,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMX7SNVSState      snvs;
+    IMXI2CState        i2c[FSL_IMX8MM_NUM_I2CS];
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
 
+    FSL_IMX8MM_I2C1_IRQ     = 35,
+    FSL_IMX8MM_I2C2_IRQ     = 36,
+    FSL_IMX8MM_I2C3_IRQ     = 37,
+    FSL_IMX8MM_I2C4_IRQ     = 38,
+
     FSL_IMX8MM_GPIO1_LOW_IRQ  = 64,
     FSL_IMX8MM_GPIO1_HIGH_IRQ = 65,
     FSL_IMX8MM_GPIO2_LOW_IRQ  = 66,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of ECSPI in iMX8MM
Added SPI IRQ lines

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/fsl-imx8mm.c         | 26 ++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  7 +++++++
 2 files changed, 33 insertions(+)

diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
+        g_autofree char *name = g_strdup_printf("spi%d", i + 1);
+        object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
+    }
+
     object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
     object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
                             TYPE_FSL_IMX8M_PCIE_PHY);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
     }
 
+    /* ECSPIs */
+    for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } spi_table[FSL_IMX8MM_NUM_ECSPIS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI1].addr, FSL_IMX8MM_ECSPI1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI2].addr, FSL_IMX8MM_ECSPI2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI3].addr, FSL_IMX8MM_ECSPI3_IRQ },
+        };
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
+                           qdev_get_gpio_in(gicdev, spi_table[i].irq));
+    }
+
     /* SNVS */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
+        case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3:
         case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/pci-host/designware.h"
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
+#include "hw/ssi/imx_spi.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
 
 enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
+    FSL_IMX8MM_NUM_ECSPIS       = 3,
     FSL_IMX8MM_NUM_GPIOS        = 5,
     FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
     IMX7SNVSState      snvs;
+    IMXSPIState        spi[FSL_IMX8MM_NUM_ECSPIS];
     IMXI2CState        i2c[FSL_IMX8MM_NUM_I2CS];
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
 
+    FSL_IMX8MM_ECSPI1_IRQ   = 31,
+    FSL_IMX8MM_ECSPI2_IRQ   = 32,
+    FSL_IMX8MM_ECSPI3_IRQ   = 33,
+
     FSL_IMX8MM_I2C1_IRQ     = 35,
     FSL_IMX8MM_I2C2_IRQ     = 36,
     FSL_IMX8MM_I2C3_IRQ     = 37,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of WDT in iMX8MM
Added WDT IRQ lines

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 28 ++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  7 +++++++
 3 files changed, 36 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
+    select WDT_IMX2
 
 config FSL_IMX8MM_EVK
     bool
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) {
+        g_autofree char *name = g_strdup_printf("wdt%d", i);
+        object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT);
+    }
+
     object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
     object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
                             TYPE_FSL_IMX8M_PCIE_PHY);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0,
                     fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr);
 
+    /* Watchdogs */
+    for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } wdog_table[FSL_IMX8MM_NUM_WDTS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG1].addr, FSL_IMX8MM_WDOG1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG2].addr, FSL_IMX8MM_WDOG2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG3].addr, FSL_IMX8MM_WDOG3_IRQ },
+        };
+
+        object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support",
+                                 true, &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, wdog_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0,
+                           qdev_get_gpio_in(gicdev, wdog_table[i].irq));
+    }
+
     /* PCIe */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_SNVS_HP:
         case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
         case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3:
+        case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3:
             /* device implemented and treated above */
             break;
 
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
 #include "hw/ssi/imx_spi.h"
+#include "hw/watchdog/wdt_imx2.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
     FSL_IMX8MM_NUM_USDHCS       = 3,
+    FSL_IMX8MM_NUM_WDTS         = 3,
 };
 
 struct FslImx8mmState {
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
+    IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
 };
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_GPIO5_LOW_IRQ  = 72,
     FSL_IMX8MM_GPIO5_HIGH_IRQ = 73,
 
+    FSL_IMX8MM_WDOG1_IRQ    = 78,
+    FSL_IMX8MM_WDOG2_IRQ    = 79,
+    FSL_IMX8MM_WDOG3_IRQ    = 10,
+
     FSL_IMX8MM_PCI_INTA_IRQ = 122,
     FSL_IMX8MM_PCI_INTB_IRQ = 123,
     FSL_IMX8MM_PCI_INTC_IRQ = 124,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of GPT in iMX8MM
Added GPT IRQ lines

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 54 +++++++++++++++++++++++++++++++++++++
 hw/timer/imx_gpt.c          | 26 ++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h | 11 ++++++++
 include/hw/timer/imx_gpt.h  |  2 ++
 5 files changed, 94 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select FSL_IMX8MP_CCM
     select IMX
     select IMX_I2C
+    select OR_IRQ
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) {
+        g_autofree char *name = g_strdup_printf("gpt%d", i + 1);
+        object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX8MM_GPT);
+    }
+    object_initialize_child(obj, "gpt5-gpt6-irq", &s->gpt5_gpt6_irq,
+                            TYPE_OR_IRQ);
+
     for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
         g_autofree char *name = g_strdup_printf("i2c%d", i + 1);
         object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                                 fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr,
                                 &s->ocram);
 
+    /* GPTs */
+    object_property_set_int(OBJECT(&s->gpt5_gpt6_irq), "num-lines", 2,
+                            &error_abort);
+    if (!qdev_realize(DEVICE(&s->gpt5_gpt6_irq), NULL, errp)) {
+        return;
+    }
+
+    qdev_connect_gpio_out(DEVICE(&s->gpt5_gpt6_irq), 0,
+                          qdev_get_gpio_in(gicdev, FSL_IMX8MM_GPT5_GPT6_IRQ));
+
+    for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) {
+        hwaddr gpt_addrs[FSL_IMX8MM_NUM_GPTS] = {
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT1].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT2].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT3].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT4].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT5].addr,
+            fsl_imx8mm_memmap[FSL_IMX8MM_GPT6].addr,
+        };
+
+        s->gpt[i].ccm = IMX_CCM(&s->ccm);
+
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_addrs[i]);
+
+        if (i < FSL_IMX8MM_NUM_GPTS - 2) {
+            static const unsigned int gpt_irqs[FSL_IMX8MM_NUM_GPTS - 2] = {
+                FSL_IMX8MM_GPT1_IRQ,
+                FSL_IMX8MM_GPT2_IRQ,
+                FSL_IMX8MM_GPT3_IRQ,
+                FSL_IMX8MM_GPT4_IRQ,
+            };
+
+            sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0,
+                               qdev_get_gpio_in(gicdev, gpt_irqs[i]));
+        } else {
+            int irq = i - FSL_IMX8MM_NUM_GPTS + 2;
+
+            sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0,
+                               qdev_get_gpio_in(DEVICE(&s->gpt5_gpt6_irq), irq));
+        }
+    }
+
     /* I2Cs */
     for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
+        case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6:
         case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3:
         case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/imx_gpt.c
+++ b/hw/timer/imx_gpt.c
@@ -XXX,XX +XXX,XX @@
  * Originally written by Hans Jiang
  * Updated by Peter Chubb
  * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
+ * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com>
  *
  * This code is licensed under GPL version 2 or later.  See
  * the COPYING file in the top-level directory.
@@ -XXX,XX +XXX,XX @@ static const IMXClk imx8mp_gpt_clocks[] = {
     CLK_NONE,      /* 111 not defined */
 };
 
+static const IMXClk imx8mm_gpt_clocks[] = {
+    CLK_NONE,      /* 000 No clock source */
+    CLK_IPG,       /* 001 ipg_clk, 532MHz */
+    CLK_IPG_HIGH,  /* 010 ipg_clk_highfreq */
+    CLK_EXT,       /* 011 External clock */
+    CLK_32k,       /* 100 ipg_clk_32k */
+    CLK_HIGH,      /* 101 ipg_clk_16M */
+    CLK_NONE,      /* 110 not defined */
+    CLK_NONE,      /* 111 not defined */
+};
+
 /* Must be called from within ptimer_transaction_begin/commit block */
 static void imx_gpt_set_freq(IMXGPTState *s)
 {
@@ -XXX,XX +XXX,XX @@ static void imx8mp_gpt_init(Object *obj)
     s->clocks = imx8mp_gpt_clocks;
 }
 
+static void imx8mm_gpt_init(Object *obj)
+{
+    IMXGPTState *s = IMX_GPT(obj);
+
+    s->clocks = imx8mm_gpt_clocks;
+}
+
 static const TypeInfo imx25_gpt_info = {
     .name = TYPE_IMX25_GPT,
     .parent = TYPE_SYS_BUS_DEVICE,
@@ -XXX,XX +XXX,XX @@ static const TypeInfo imx8mp_gpt_info = {
     .instance_init = imx8mp_gpt_init,
 };
 
+static const TypeInfo imx8mm_gpt_info = {
+    .name = TYPE_IMX8MM_GPT,
+    .parent = TYPE_IMX25_GPT,
+    .instance_init = imx8mm_gpt_init,
+};
+
 static void imx_gpt_register_types(void)
 {
     type_register_static(&imx25_gpt_info);
@@ -XXX,XX +XXX,XX @@ static void imx_gpt_register_types(void)
     type_register_static(&imx6ul_gpt_info);
     type_register_static(&imx7_gpt_info);
     type_register_static(&imx8mp_gpt_info);
+    type_register_static(&imx8mm_gpt_info);
 }
 
 type_init(imx_gpt_register_types)
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
+#include "hw/or-irq.h"
 #include "hw/pci-host/designware.h"
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
 #include "hw/ssi/imx_spi.h"
+#include "hw/timer/imx_gpt.h"
 #include "hw/watchdog/wdt_imx2.h"
 #include "qom/object.h"
 #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
     FSL_IMX8MM_NUM_ECSPIS       = 3,
     FSL_IMX8MM_NUM_GPIOS        = 5,
+    FSL_IMX8MM_NUM_GPTS         = 6,
     FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMXGPTState        gpt[FSL_IMX8MM_NUM_GPTS];
     IMXGPIOState       gpio[FSL_IMX8MM_NUM_GPIOS];
     IMX8MPCCMState     ccm;
     IMX8MPAnalogState  analog;
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
+    OrIRQState         gpt5_gpt6_irq;
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_I2C3_IRQ     = 37,
     FSL_IMX8MM_I2C4_IRQ     = 38,
 
+    FSL_IMX8MM_GPT1_IRQ      = 55,
+    FSL_IMX8MM_GPT2_IRQ      = 54,
+    FSL_IMX8MM_GPT3_IRQ      = 53,
+    FSL_IMX8MM_GPT4_IRQ      = 52,
+    FSL_IMX8MM_GPT5_GPT6_IRQ = 51,
+
     FSL_IMX8MM_GPIO1_LOW_IRQ  = 64,
     FSL_IMX8MM_GPIO1_HIGH_IRQ = 65,
     FSL_IMX8MM_GPIO2_LOW_IRQ  = 66,
diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/timer/imx_gpt.h
+++ b/include/hw/timer/imx_gpt.h
@@ -XXX,XX +XXX,XX @@
  * Originally written by Hans Jiang
  * Updated by Peter Chubb
  * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
+ * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com>
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
@@ -XXX,XX +XXX,XX @@
 #define TYPE_IMX6UL_GPT "imx6ul.gpt"
 #define TYPE_IMX7_GPT "imx7.gpt"
 #define TYPE_IMX8MP_GPT "imx8mp.gpt"
+#define TYPE_IMX8MM_GPT "imx8mm.gpt"
 
 #define TYPE_IMX_GPT TYPE_IMX25_GPT
 
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of ENET ethernet controller in iMX8MM
Enables testing and debugging of network dependent drivers
Added ENET MAC IRQ lines

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 24 ++++++++++++++++++++++++
 hw/arm/imx8mm-evk.c         |  1 +
 include/hw/arm/fsl-imx8mm.h | 10 +++++++++-
 4 files changed, 35 insertions(+), 1 deletion(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select FSL_IMX8MP_ANALOG
     select FSL_IMX8MP_CCM
     select IMX
+    select IMX_FEC
     select IMX_I2C
     select OR_IRQ
     select SDHCI
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT);
     }
 
+    object_initialize_child(obj, "eth0", &s->enet, TYPE_IMX_ENET);
+
     object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
     object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
                             TYPE_FSL_IMX8M_PCIE_PHY);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(gicdev, spi_table[i].irq));
     }
 
+    /* ENET1 */
+    object_property_set_uint(OBJECT(&s->enet), "phy-num", s->phy_num,
+                             &error_abort);
+    object_property_set_uint(OBJECT(&s->enet), "tx-ring-num", 3, &error_abort);
+    qemu_configure_nic_device(DEVICE(&s->enet), true, NULL);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->enet), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->enet), 0,
+                    fsl_imx8mm_memmap[FSL_IMX8MM_ENET1].addr);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 0,
+                       qdev_get_gpio_in(gicdev, FSL_IMX8MM_ENET1_MAC_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 1,
+                       qdev_get_gpio_in(gicdev, FSL_IMX6_ENET1_MAC_1588_IRQ));
+
     /* SNVS */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
         return;
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
         case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6:
         case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3:
+        case FSL_IMX8MM_ENET1:
         case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     }
 }
 
+static const Property fsl_imx8mm_properties[] = {
+    DEFINE_PROP_UINT32("fec1-phy-num", FslImx8mmState, phy_num, 0),
+    DEFINE_PROP_BOOL("fec1-phy-connected", FslImx8mmState, phy_connected, true),
+};
+
 static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(oc);
 
+    device_class_set_props(dc, fsl_imx8mm_properties);
     dc->realize = fsl_imx8mm_realize;
 
     dc->desc = "i.MX 8MM SoC";
diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/imx8mm-evk.c
+++ b/hw/arm/imx8mm-evk.c
@@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine)
 
     s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine),
                                          "soc", &error_fatal, NULL));
+    object_property_set_uint(OBJECT(s), "fec1-phy-num", 1, &error_fatal);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal);
 
     memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START,
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mp_analog.h"
 #include "hw/misc/imx8mp_ccm.h"
-#include "hw/or-irq.h"
+#include "hw/net/imx_fec.h"
+#include "hw/core/or-irq.h"
 #include "hw/pci-host/designware.h"
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXI2CState        i2c[FSL_IMX8MM_NUM_I2CS];
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     MemoryRegion ocram;
+    IMXFECState        enet;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
     IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
     OrIRQState         gpt5_gpt6_irq;
+
+    uint32_t           phy_num;
+    bool               phy_connected;
 };
 
 enum FslImx8mmMemoryRegions {
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_WDOG2_IRQ    = 79,
     FSL_IMX8MM_WDOG3_IRQ    = 10,
 
+    FSL_IMX8MM_ENET1_MAC_IRQ    = 118,
+    FSL_IMX6_ENET1_MAC_1588_IRQ = 121,
+
     FSL_IMX8MM_PCI_INTA_IRQ = 122,
     FSL_IMX8MM_PCI_INTB_IRQ = 123,
     FSL_IMX8MM_PCI_INTC_IRQ = 124,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

It enables emulation of USB on iMX8MM
Enables testing and debugging of USB drivers

Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx8mm.c         | 27 +++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h |  6 ++++++
 3 files changed, 34 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
+    select USB_DWC3
     select WDT_IMX2
 
 config FSL_IMX8MM_EVK
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) {
+        g_autofree char *name = g_strdup_printf("usb%d", i);
+        object_initialize_child(obj, name, &s->usb[i], TYPE_USB_DWC3);
+    }
+
     for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
         g_autofree char *name = g_strdup_printf("spi%d", i + 1);
         object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
     }
 
+    /* USBs */
+    for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } usb_table[FSL_IMX8MM_NUM_USBS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USB1].addr, FSL_IMX8MM_USB1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_USB2].addr, FSL_IMX8MM_USB2_IRQ },
+        };
+
+        qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p2", 1);
+        qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p3", 1);
+        qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "slots", 2);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), errp)) {
+            return;
+        }
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 0,
+                           qdev_get_gpio_in(gicdev, usb_table[i].irq));
+    }
+
     /* ECSPIs */
     for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
         static const struct {
@@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_OCRAM:
         case FSL_IMX8MM_SNVS_HP:
         case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
+        case FSL_IMX8MM_USB1 ... FSL_IMX8MM_USB2:
         case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3:
         case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3:
             /* device implemented and treated above */
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/sd/sdhci.h"
 #include "hw/ssi/imx_spi.h"
 #include "hw/timer/imx_gpt.h"
+#include "hw/usb/hcd-dwc3.h"
 #include "hw/watchdog/wdt_imx2.h"
 #include "qom/object.h"
 #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_I2CS         = 4,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
+    FSL_IMX8MM_NUM_USBS         = 2,
     FSL_IMX8MM_NUM_USDHCS       = 3,
     FSL_IMX8MM_NUM_WDTS         = 3,
 };
@@ -XXX,XX +XXX,XX @@ struct FslImx8mmState {
     IMXFECState        enet;
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
     IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
+    USBDWC3            usb[FSL_IMX8MM_NUM_USBS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
     OrIRQState         gpt5_gpt6_irq;
@@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_I2C3_IRQ     = 37,
     FSL_IMX8MM_I2C4_IRQ     = 38,
 
+    FSL_IMX8MM_USB1_IRQ     = 40,
+    FSL_IMX8MM_USB2_IRQ     = 41,
+
     FSL_IMX8MM_GPT1_IRQ      = 55,
     FSL_IMX8MM_GPT2_IRQ      = 54,
     FSL_IMX8MM_GPT3_IRQ      = 53,
-- 
2.43.0

From: Gaurav Sharma <gaurav.sharma_7@nxp.com>

Added script that would validate the iMX8MM emulation by checking the
linux console log. If it succeeds, it will return:-

ok 1 test_imx8mm_evk.Imx8mmEvkMachine.test_aarch64_imx8mm_evk_usdhc

Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
[PMM: Add missing blank lines that flake8 wants]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 MAINTAINERS                                 |  1 +
 tests/functional/aarch64/meson.build        |  2 +
 tests/functional/aarch64/test_imx8mm_evk.py | 69 +++++++++++++++++++++
 3 files changed, 72 insertions(+)
 create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/arm/fsl-imx8mm.c
 F: hw/arm/imx8mm-evk.c
 F: include/hw/arm/fsl-imx8mm.h
 F: docs/system/arm/imx8m.rst
+F: tests/functional/aarch64/test_imx8mm_evk.py
 
 MCIMX8MP-EVK / i.MX8MP
 M: Bernhard Beschow <shentey@gmail.com>
diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/tests/functional/aarch64/meson.build
+++ b/tests/functional/aarch64/meson.build
@@ -XXX,XX +XXX,XX @@ test_aarch64_timeouts = {
   'aspeed_ast2700a2' : 600,
   'aspeed_ast2700fc' : 600,
   'device_passthrough' : 720,
+  'imx8mm_evk' : 240,
   'imx8mp_evk' : 240,
   'raspi4' : 480,
   'reverse_debug' : 180,
@@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [
   'aspeed_ast2700fc',
   'device_passthrough',
   'hotplug_pci',
+  'imx8mm_evk',
   'imx8mp_evk',
   'kvm',
   'multiprocess',
diff --git a/tests/functional/aarch64/test_imx8mm_evk.py b/tests/functional/aarch64/test_imx8mm_evk.py
new file mode 100755
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/functional/aarch64/test_imx8mm_evk.py
@@ -XXX,XX +XXX,XX @@
+#!/usr/bin/env python3
+#
+# Functional test that boots a Linux kernel and checks the console
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from qemu_test import LinuxKernelTest, Asset
+
+
+class Imx8mmEvkMachine(LinuxKernelTest):
+
+    ASSET_IMAGE = Asset(
+        ('https://cloud.debian.org/images/cloud/bookworm/20231210-1590/'
+         'debian-12-generic-arm64-20231210-1590.tar.xz'),
+        '7ebf1577b32d5af6204df74b54ca2e4675de9b5a9fa14f3ff70b88eeb7b3b359')
+
+    KERNEL_OFFSET = 0x51000000
+    KERNEL_SIZE = 32622528
+    INITRD_OFFSET = 0x76000000
+    INITRD_SIZE = 30987766
+    DTB_OFFSET = 0x64DB5000
+    DTB_SIZE = 36812
+
+    def extract(self, in_path, out_path, offset, size):
+        try:
+            with open(in_path, "rb") as source:
+                source.seek(offset)
+                data = source.read(size)
+            with open(out_path, "wb") as target:
+                target.write(data)
+        except (IOError, ValueError) as e:
+            self.log.error(f"Failed to extract {out_path}: {e}")
+            raise
+
+    def setUp(self):
+        super().setUp()
+
+        self.image_path = self.scratch_file("disk.raw")
+        self.kernel_path = self.scratch_file("linux")
+        self.initrd_path = self.scratch_file("initrd.zstd")
+        self.dtb_path = self.scratch_file("imx8mm-evk.dtb")
+
+        self.archive_extract(self.ASSET_IMAGE)
+        self.extract(self.image_path, self.kernel_path,
+                     self.KERNEL_OFFSET, self.KERNEL_SIZE)
+        self.extract(self.image_path, self.initrd_path,
+                     self.INITRD_OFFSET, self.INITRD_SIZE)
+        self.extract(self.image_path, self.dtb_path,
+                     self.DTB_OFFSET, self.DTB_SIZE)
+
+    def test_aarch64_imx8mm_evk_usdhc(self):
+        self.require_accelerator("tcg")
+        self.set_machine('imx8mm-evk')
+        self.vm.set_console(console_index=1)
+        self.vm.add_args('-m', '2G',
+                         '-smp', '4',
+                         '-kernel', self.kernel_path,
+                         '-initrd', self.initrd_path,
+                         '-dtb', self.dtb_path,
+                         '-append', 'root=/dev/mmcblk2p1',
+                         '-drive', f'file={self.image_path},if=sd,bus=2,'
+                                    'format=raw,id=mmcblk2,snapshot=on')
+
+        self.vm.launch()
+        self.wait_for_console_pattern('Welcome to ')
+
+
+if __name__ == '__main__':
+    LinuxKernelTest.main()
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

As mentioned by Richard in [*]:

We don't actually need any specific endianness here, because
  every byte has the same value.  So we could simply drop MO_TE.
  That would produce a store in host-endianness, which will be
  fractionally more efficient on some hosts.

[*] https://lore.kernel.org/qemu-devel/d64d3576-9188-4e74-afdc-3492c9feb8e0@linaro.org/

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260414005348.4767-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/helper-a64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper-a64.c
+++ b/target/arm/tcg/helper-a64.c
@@ -XXX,XX +XXX,XX @@ static uint64_t set_step_tags(CPUARMState *env, uint64_t toaddr,
          * the page dirty and will use the fast path.
          */
         uint64_t repldata = data * 0x0101010101010101ULL;
-        MemOpIdx oi16 = make_memop_idx(MO_TE | MO_128, memidx);
+        MemOpIdx oi16 = make_memop_idx(MO_128, memidx);
         cpu_st16_mmu(env, toaddr, int128_make128(repldata, repldata), oi16, ra);
         mte_mops_set_tags(env, toaddr, 16, *mtedesc);
         return 16;
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Extract the implicit MO_TE definition in order to replace
it in the next commit.

Mechanical change using:

$ for n in UW UL UQ UO SW SL SQ; do \
      sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \
           $(git grep -l MO_TE$n target/arm); \
    done

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c   |  6 +--
 target/arm/tcg/mve_helper.c | 79 ++++++++++++++++++++-----------------
 2 files changed, 45 insertions(+), 40 deletions(-)

diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/m_helper.c
+++ b/target/arm/tcg/m_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest)
 
     /* Note that these stores can throw exceptions on MPU faults */
     ARMMMUIdx mmu_idx = arm_mmu_idx(env);
-    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+    MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN,
                                  arm_to_core_mmu_idx(mmu_idx));
     cpu_stl_mmu(env, sp, nextinst, oi, GETPC());
     cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC());
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr)
     bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK;
     uintptr_t ra = GETPC();
     ARMMMUIdx mmu_idx = arm_mmu_idx(env);
-    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+    MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN,
                                  arm_to_core_mmu_idx(mmu_idx));
 
     assert(env->v7m.secure);
@@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr)
     ARMCPU *cpu = env_archcpu(env);
     uintptr_t ra = GETPC();
     ARMMMUIdx mmu_idx = arm_mmu_idx(env);
-    MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN,
+    MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN,
                                  arm_to_core_mmu_idx(mmu_idx));
 
     /* fptr is the value of Rn, the frame pointer we load the FP regs from */
diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env)
     }
 
 DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t)
-DO_VLDR(vldrh, MO_TEUW, 2, uint16_t, ldw, 2, uint16_t)
-DO_VLDR(vldrw, MO_TEUL, 4, uint32_t, ldl, 4, uint32_t)
+DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t)
+DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t)
 
 DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t)
-DO_VSTR(vstrh, MO_TEUW, 2, stw, 2, uint16_t)
-DO_VSTR(vstrw, MO_TEUL, 4, stl, 4, uint32_t)
+DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t)
+DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t)
 
 DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t)
 DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t)
 DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t)
 DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t)
-DO_VLDR(vldrh_sw, MO_TESW, 2, int16_t, ldw, 4, int32_t)
-DO_VLDR(vldrh_uw, MO_TEUW, 2, uint16_t, ldw, 4, uint32_t)
+DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t)
+DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t)
 
 DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t)
 DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t)
-DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
+DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t)
 
 #undef DO_VLDR
 #undef DO_VSTR
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t)
 
 DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_sw, MO_TESW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4,
+           int32_t, uint32_t, ADDR_ADD, false)
 
 DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uh, MO_TEUW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uw, MO_TEUW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrw_sg_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
+           uint16_t, uint16_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
+           uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
+           uint32_t, uint32_t, ADDR_ADD, false)
 DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false)
 
-DO_VLDR_SG(vldrh_sg_os_sw, MO_TESW, int16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4,
            int32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uh, MO_TEUW, uint16_t, ldw, 2,
+DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
            uint16_t, uint16_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uw, MO_TEUW, uint16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
            uint32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrw_sg_os_uw, MO_TEUL, uint32_t, ldl, 4,
+DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
            uint32_t, uint32_t, ADDR_ADD_OSW, false)
 DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false)
 
 DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrw_sg_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false)
 DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false)
 
-DO_VSTR_SG(vstrh_sg_os_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrh_sg_os_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrw_sg_os_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
+DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
 DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false)
 
-DO_VLDR_SG(vldrw_sg_wb_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true)
+DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
+           uint32_t, uint32_t, ADDR_ADD, true)
 DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true)
-DO_VSTR_SG(vstrw_sg_wb_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, true)
+DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true)
 DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
 
 /*
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx);      \
+        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 43 +++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 23 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx);        \
+        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx);        \
+        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
 
 DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4,
-           int32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false)
 
 DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false)
 DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
-           uint16_t, uint16_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
-           uint32_t, uint32_t, ADDR_ADD, false)
-DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
-           uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrh_sg_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false)
+DO_VLDR_SG(vldrw_sg_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false)
 DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false)
 
-DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_sw, MO_SW, int16_t, ldw, 4,
            int32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2,
+DO_VLDR_SG(vldrh_sg_os_uh, MO_UW, uint16_t, ldw, 2,
            uint16_t, uint16_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4,
+DO_VLDR_SG(vldrh_sg_os_uw, MO_UW, uint16_t, ldw, 4,
            uint32_t, uint32_t, ADDR_ADD_OSH, false)
-DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
+DO_VLDR_SG(vldrw_sg_os_uw, MO_UL, uint32_t, ldl, 4,
            uint32_t, uint32_t, ADDR_ADD_OSW, false)
 DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false)
 
 DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false)
 DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false)
-DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrh_sg_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD, false)
+DO_VSTR_SG(vstrw_sg_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, false)
 DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false)
 
-DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
-DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
+DO_VSTR_SG(vstrh_sg_os_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrh_sg_os_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false)
+DO_VSTR_SG(vstrw_sg_os_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false)
 DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false)
 
-DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4,
-           uint32_t, uint32_t, ADDR_ADD, true)
+DO_VLDR_SG(vldrw_sg_wb_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true)
 DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true)
-DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true)
+DO_VSTR_SG(vstrw_sg_wb_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, true)
 DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
 
 /*
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/internals.h      | 6 ++++++
 target/arm/tcg/mve_helper.c | 3 ++-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@
 #include "exec/hwaddr.h"
 #include "exec/vaddr.h"
 #include "exec/breakpoint.h"
+#include "exec/memop.h"
 #include "accel/tcg/tb-cpu-state.h"
 #include "hw/core/registerfields.h"
 #include "tcg/tcg-gvec-desc.h"
@@ -XXX,XX +XXX,XX @@
 #define BANK_HYP    6
 #define BANK_MON    7
 
+static inline MemOp mo_endian(CPUARMState *env)
+{
+    return EX_TBFLAG_ANY(env->hflags, BE_DATA) ? MO_BE : MO_LE;
+}
+
 static inline int arm_env_mmu_index(CPUARMState *env)
 {
     return EX_TBFLAG_ANY(env->hflags, MMUIDX);
diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/mve_helper.c | 47 +++++++++++++++++++++++--------------
 1 file changed, 30 insertions(+), 17 deletions(-)

diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env)
         uint16_t eci_mask = mve_eci_mask(env);                          \
         unsigned b, e;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         /*                                                              \
          * R_SXTM allows the dest reg to become UNKNOWN for abandoned   \
@@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env)
         uint16_t mask = mve_element_mask(env);                          \
         unsigned b, e;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         for (b = 0, e = 0; b < 16; b += ESIZE, e++) {                   \
             if (mask & (1 << b)) {                                      \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN,          \
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \
                                      mmu_idx);                          \
         for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \
             if (!(eci_mask & 1)) {                                      \
@@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t)
         unsigned e;                                                     \
         uint32_t addr;                                                  \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) {      \
             if (!(eci_mask & 1)) {                                      \
                 continue;                                               \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         static const uint8_t off[4] = { O1, O2, O3, O4 };               \
         uint32_t addr, data;                                            \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         int y; /* y counts 0 2 0 2 */                                   \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) {   \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20)
         uint32_t *qd;                                                   \
         int y;                                                          \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint8_t *qd;                                                    \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         int e;                                                          \
         uint16_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
@@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9)
         uint32_t addr, data;                                            \
         uint32_t *qd;                                                   \
         int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env));            \
-        MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\
+        MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \
+                                     mmu_idx);                          \
         for (beat = 0; beat < 4; beat++, mask >>= 4) {                  \
             if ((mask & 1) == 0) {                                      \
                 /* ECI says skip this beat */                           \
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/meson.build  | 3 ++-
 target/arm/tcg/mve_helper.c | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/meson.build
+++ b/target/arm/tcg/meson.build
@@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c'))
 arm_ss.add(files(
   'cpu32.c',
   'm_helper.c',
-  'mve_helper.c',
 ))
 
 arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
@@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add(
   'debug.c',
   'hflags.c',
   'gengvec.c',
+  'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
   'psci.c',
@@ -XXX,XX +XXX,XX @@ arm_user_ss.add(
   'debug.c',
   'gengvec.c',
   'hflags.c',
+  'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
   'tlb_helper.c',
diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/mve_helper.c
+++ b/target/arm/tcg/mve_helper.c
@@ -XXX,XX +XXX,XX @@
 #include "helper-mve.h"
 #include "internals.h"
 #include "vec_internal.h"
-#include "accel/tcg/cpu-ldst.h"
+#include "accel/tcg/cpu-ldst-common.h"
 #include "tcg/tcg.h"
 #include "fpu/softfloat.h"
 #include "crypto/clmul.h"
-- 
2.43.0

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260414005348.4767-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/m_helper.c  | 2 +-
 target/arm/tcg/meson.build | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/m_helper.c
+++ b/target/arm/tcg/m_helper.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/log.h"
 #include "exec/page-protection.h"
 #ifdef CONFIG_TCG
-#include "accel/tcg/cpu-ldst.h"
+#include "accel/tcg/cpu-ldst-common.h"
 #include "semihosting/common-semi.h"
 #endif
 #if !defined(CONFIG_USER_ONLY)
diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/meson.build
+++ b/target/arm/tcg/meson.build
@@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c'))
 
 arm_ss.add(files(
   'cpu32.c',
-  'm_helper.c',
 ))
 
 arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
@@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add(
   'debug.c',
   'hflags.c',
   'gengvec.c',
+  'm_helper.c',
   'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
@@ -XXX,XX +XXX,XX @@ arm_user_ss.add(
   'debug.c',
   'gengvec.c',
   'hflags.c',
+  'm_helper.c',
   'mve_helper.c',
   'neon_helper.c',
   'op_helper.c',
-- 
2.43.0

From: Thomas Huth <thuth@redhat.com>

When writing to this register, QEMU currently aborts:

$ echo "readl 0x10000018" | ./qemu-system-arm -audiodev none,id=snd0 \
    -M integratorcp,accel=qtest,audiodev=snd0 -display none -qtest stdio
 [I 0.000000] OPENED
 [R +0.001907] readl 0x10000018
 qemu: hardware error: integratorcm_read: CM_LMBUSCNT
 [...]
 Aborted                    (core dumped)

This is bad, a guest should ideally never be able to kill QEMU like this.

Now, according to the "Intergrator/CP User Guide" from:

https://developer.arm.com/documentation/dui0159/b/porting-integrator-ap-and-im-pd1/registers

"The Integrator/AP CM_LMBUSCNT has been removed."

That means this register does not seem to be implemented on real CP boards
at all, only for older AP boards. Thus it should be fine if we simply
ignore this register in QEMU and handle it like all other unimplemented
registers in the "default" handler of the case statement.

Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3407
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260420064933.64765-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/integratorcp.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/integratorcp.c
+++ b/hw/arm/integratorcp.c
@@ -XXX,XX +XXX,XX @@ static uint64_t integratorcm_read(void *opaque, hwaddr offset,
         } else {
             return s->cm_lock;
         }
-    case 6: /* CM_LMBUSCNT */
-        /* ??? High frequency timer.  */
-        hw_error("integratorcm_read: CM_LMBUSCNT");
     case 7: /* CM_AUXOSC */
         return s->cm_auxosc;
     case 8: /* CM_SDRAM */
-- 
2.43.0

include/hw/arm/primecell.h used to be more expansive, but now the
only thing it defines is the ARM_SYSCTL_GPIO_* constants for the GPIO
lines for the arm-sysctl system-control device used on the Realview,
Versatile and Versatile Express boards.

Replace it with a header file specific to that device.

virt.c and vmapple.c included primecell.h despite not using the
constants it defined; there we can simply drop the include entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260416172627.690396-1-peter.maydell@linaro.org
---
 MAINTAINERS                  |  2 +-
 hw/arm/realview.c            |  2 +-
 hw/arm/vexpress.c            |  2 +-
 hw/arm/virt.c                |  1 -
 hw/misc/arm_sysctl.c         |  2 +-
 hw/vmapple/vmapple.c         |  1 -
 include/hw/arm/primecell.h   | 12 ------------
 include/hw/misc/arm_sysctl.h | 16 ++++++++++++++++
 8 files changed, 20 insertions(+), 18 deletions(-)
 delete mode 100644 include/hw/arm/primecell.h
 create mode 100644 include/hw/misc/arm_sysctl.h

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ F: hw/ssi/pl022.c
 F: include/hw/ssi/pl022.h
 F: hw/rtc/pl031.c
 F: include/hw/rtc/pl031.h
-F: include/hw/arm/primecell.h
 F: hw/timer/cmsdk-apb-timer.c
 F: include/hw/timer/cmsdk-apb-timer.h
 F: tests/qtest/cmsdk-apb-timer-test.c
@@ -XXX,XX +XXX,XX @@ F: hw/*/versatile*
 F: hw/i2c/arm_sbcon_i2c.c
 F: include/hw/i2c/arm_sbcon_i2c.h
 F: hw/misc/arm_sysctl.c
+F: include/hw/misc/arm_sysctl.h
 F: docs/system/arm/versatile.rst
 
 Virt
diff --git a/hw/arm/realview.c b/hw/arm/realview.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/realview.c
+++ b/hw/arm/realview.c
@@ -XXX,XX +XXX,XX @@
 #include "target/arm/cpu.h"
 #include "hw/core/sysbus.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/arm/machines-qom.h"
 #include "hw/core/split-irq.h"
+#include "hw/misc/arm_sysctl.h"
 #include "hw/net/lan9118.h"
 #include "hw/net/smc91c111.h"
 #include "hw/pci/pci.h"
diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/vexpress.c
+++ b/hw/arm/vexpress.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/datadir.h"
 #include "hw/core/sysbus.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/arm/machines-qom.h"
+#include "hw/misc/arm_sysctl.h"
 #include "hw/net/lan9118.h"
 #include "hw/i2c/i2c.h"
 #include "net/net.h"
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -XXX,XX +XXX,XX @@
 #include "monitor/qdev.h"
 #include "hw/core/sysbus.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/arm/virt.h"
 #include "hw/arm/machines-qom.h"
 #include "hw/block/flash.h"
diff --git a/hw/misc/arm_sysctl.c b/hw/misc/arm_sysctl.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/arm_sysctl.c
+++ b/hw/misc/arm_sysctl.c
@@ -XXX,XX +XXX,XX @@
 #include "system/runstate.h"
 #include "qemu/bitops.h"
 #include "hw/core/sysbus.h"
+#include "hw/misc/arm_sysctl.h"
 #include "migration/vmstate.h"
-#include "hw/arm/primecell.h"
 #include "qemu/log.h"
 #include "qemu/module.h"
 #include "qom/object.h"
diff --git a/hw/vmapple/vmapple.c b/hw/vmapple/vmapple.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/vmapple/vmapple.c
+++ b/hw/vmapple/vmapple.c
@@ -XXX,XX +XXX,XX @@
 #include "hw/core/sysbus.h"
 #include "hw/usb/usb.h"
 #include "hw/arm/boot.h"
-#include "hw/arm/primecell.h"
 #include "hw/char/pl011.h"
 #include "hw/intc/arm_gic.h"
 #include "hw/intc/arm_gicv3_common.h"
diff --git a/include/hw/arm/primecell.h b/include/hw/arm/primecell.h
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/include/hw/arm/primecell.h
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-#ifndef PRIMECELL_H
-#define PRIMECELL_H
-
-/* Declarations for ARM PrimeCell based periperals.  */
-/* Also includes some devices that are currently only used by the
-   ARM boards.  */
-
-/* arm_sysctl GPIO lines */
-#define ARM_SYSCTL_GPIO_MMC_WPROT 0
-#define ARM_SYSCTL_GPIO_MMC_CARDIN 1
-
-#endif
diff --git a/include/hw/misc/arm_sysctl.h b/include/hw/misc/arm_sysctl.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/misc/arm_sysctl.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * Status and system control registers for ARM RealView/Versatile boards.
+ *
+ * Copyright (c) Linaro Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef HW_MISC_ARM_SYSCTL_H
+#define HW_MISC_ARM_SYSCTL_H
+
+/* arm_sysctl inbound GPIO lines */
+#define ARM_SYSCTL_GPIO_MMC_WPROT 0
+#define ARM_SYSCTL_GPIO_MMC_CARDIN 1
+
+#endif
-- 
2.43.0

If we create a normally-AArch64 CPU and configure it with
aarch64=off, this will by default leave all the AArch64 ID register
values in its ARMISARegisters struct untouched.  That in turn means
that tests of cpu_isar_feature(aa64_something, cpu) will return true.

Until now we have had a design policy that you shouldn't check an
aa64_ feature unless you know that the CPU has AArch64; but this is
quite fragile as it's easy to forget and only causes a problem in the
corner case where AArch64 was turned off.  In particular, when we
extend the ability to disable AArch64 from only KVM to also TCG there
are many more aa64 feature check points which we would otherwise have
to audit for whether they needed to be guarded with a check on
ARM_FEATURE_AARCH64.

Instead, make the CPU realize function zero out all the 64-bit ID
registers if a TCG CPU doesn't have AArch64; this will make aa64_
feature tests generally return false.

We only do this for TCG because only TCG really needs it, and for
KVM it might be confusing to have QEMU's idea of the ID registers
be different from KVM's.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20260416165353.589569-2-peter.maydell@linaro.org
---
 target/arm/cpu.c | 35 +++++++++++++++++++++++++++++++++++
 target/arm/cpu.h |  3 ++-
 2 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp)
     }
 }
 
+static void arm_clear_aarch64_idregs(ARMCPU *cpu)
+{
+    /* Zero out all the AArch64 ID registers in ARMISARegisters */
+    SET_IDREG(&cpu->isar, ID_AA64ISAR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64ISAR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64ISAR2, 0);
+    SET_IDREG(&cpu->isar, ID_AA64PFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64PFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64PFR2, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR2, 0);
+    SET_IDREG(&cpu->isar, ID_AA64MMFR3, 0);
+    SET_IDREG(&cpu->isar, ID_AA64DFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64DFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64AFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64AFR1, 0);
+    SET_IDREG(&cpu->isar, ID_AA64ZFR0, 0);
+    SET_IDREG(&cpu->isar, ID_AA64SMFR0, 0);
+}
+
 static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
 {
     CPUState *cs = CPU(dev);
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
     }
 #endif
 
+    /*
+     * A TCG aarch64=off CPU has no AArch64 at all, so we clear out the
+     * ID registers to avoid cpu_isar_feature(aa64_something, cpu) tests
+     * incorrectly returning true. We don't do this for other accelerators
+     * (which in practice means "for KVM", since no others have AArch32
+     * guest support) because from KVM's point of view the AArch64 ID
+     * registers still exist and must have their correct values. So we
+     * avoid clearing them out so that we don't have QEMU and KVM with
+     * different ideas of the ID registers.
+     */
+    if (tcg_enabled() && !arm_feature(env, ARM_FEATURE_AARCH64)) {
+        arm_clear_aarch64_idregs(cpu);
+    }
+
 #ifdef CONFIG_USER_ONLY
     /*
      * User mode relies on IC IVAU instructions to catch modification of
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ struct ArchCPU {
      * Note that if you add an ID register to the ARMISARegisters struct
      * you need to also update the 32-bit and 64-bit versions of the
      * kvm_arm_get_host_cpu_features() function to correctly populate the
-     * field by reading the value from the KVM vCPU.
+     * field by reading the value from the KVM vCPU. If it is an AArch64
+     * ID register then you also must update arm_clear_aarch64_idregs().
      */
     struct ARMISARegisters {
         uint32_t mvfr0;
-- 
2.43.0

Allow the 'aarch64=off' property, which is currently KVM-only, to
be set for TCG CPUs also.

Note that we don't permit it on the qemu-aarch64 user-mode binary:
this makes no sense as that executable can only handle AArch64
syscalls (and it would also assert at startup since it doesn't
compile in the A32-specific GDB xml files like arm-neon.xml).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260416165353.589569-3-peter.maydell@linaro.org
---
 docs/system/arm/cpu-features.rst | 10 +++++----
 target/arm/cpu-features.h        |  5 +++++
 target/arm/cpu.c                 | 36 ++++++++++++++++++++++++++++----
 tests/qtest/arm-cpu-features.c   |  8 ++-----
 4 files changed, 45 insertions(+), 14 deletions(-)

diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/cpu-features.rst
+++ b/docs/system/arm/cpu-features.rst
@@ -XXX,XX +XXX,XX @@ not implement ARMv8-A, will not have the ``aarch64`` CPU property.
 QEMU's support may be limited for some CPU features, only partially
 supporting the feature or only supporting the feature under certain
 configurations.  For example, the ``aarch64`` CPU feature, which, when
-disabled, enables the optional AArch32 CPU feature, is only supported
-when using the KVM accelerator and when running on a host CPU type that
-supports the feature.  While ``aarch64`` currently only works with KVM,
-it could work with TCG.  CPU features that are specific to KVM are
+disabled, enables the optional AArch32 CPU feature, can only be set to
+``off`` on the TCG and KVM accelerators, and it cannot be set to
+``off`` under KVM unless running on a host CPU type that supports
+running guests in AArch32.
+
+CPU features that are inherently specific to KVM are
 prefixed with "kvm-" and are described in "KVM VCPU Features".
 
 CPU Feature Probing
diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu-features.h
+++ b/target/arm/cpu-features.h
@@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_aa32_el2(const ARMISARegisters *id)
     return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL2) >= 2;
 }
 
+static inline bool isar_feature_aa64_aa32_el3(const ARMISARegisters *id)
+{
+    return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL3) >= 2;
+}
+
 static inline bool isar_feature_aa64_ras(const ARMISARegisters *id)
 {
     return FIELD_EX64_IDREG(id, ID_AA64PFR0, RAS) != 0;
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_set_aarch64(Object *obj, bool value, Error **errp)
      * uniform execution state like do_interrupt.
      */
     if (value == false) {
-        if (!kvm_enabled() || !kvm_arm_aarch32_supported()) {
-            error_setg(errp, "'aarch64' feature cannot be disabled "
-                             "unless KVM is enabled and 32-bit EL1 "
-                             "is supported");
+        if (kvm_enabled()) {
+            if (!kvm_arm_aarch32_supported()) {
+                error_setg(errp, "'aarch64' feature cannot be disabled for KVM "
+                           "because this host does not support 32-bit EL1");
+                return;
+            }
+        } else if (tcg_enabled()) {
+#ifdef CONFIG_USER_ONLY
+            error_setg(errp, "'aarch64' feature cannot be disabled for "
+                       "usermode emulator qemu-aarch64; use qemu-arm instead");
+            return;
+#else
+            bool aa32_at_highest_el;
+            if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) {
+                aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el3, cpu);
+            } else if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) {
+                aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el2, cpu);
+            } else {
+                aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el1, cpu);
+            }
+
+            if (!aa32_at_highest_el) {
+                error_setg(errp, "'aarch64' feature cannot be disabled for "
+                           "this TCG CPU because it does not support 32-bit "
+                           "execution at its highest implemented exception "
+                           "level");
+                return;
+            }
+#endif
+        } else {
+            error_setg(errp, "'aarch64' feature cannot be disabled for "
+                       "this accelerator");
             return;
         }
         unset_feature(&cpu->env, ARM_FEATURE_AARCH64);
diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c
index XXXXXXX..XXXXXXX 100644
--- a/tests/qtest/arm-cpu-features.c
+++ b/tests/qtest/arm-cpu-features.c
@@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data)
         sve_tests_default(qts, "max");
         pauth_tests_default(qts, "max");
 
-        /* Test that features that depend on KVM generate errors without. */
-        assert_error(qts, "max",
-                     "'aarch64' feature cannot be disabled "
-                     "unless KVM is enabled and 32-bit EL1 "
-                     "is supported",
-                     "{ 'aarch64': false }");
+        /* TCG allows us to turn off AArch64 on the 'max' CPU type */
+        assert_set_feature(qts, "max", "aarch64", false);
     }
 
     qtest_quit(qts);
-- 
2.43.0

Add a basic test of the TCG 'aarch64=off' functionality; this is the
same as our existing arm/test_virt test, but it runs the AArch32
guest kernel on qemu-system-aarch64 with -cpu max,aarch64=off.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260416165353.589569-4-peter.maydell@linaro.org
---
 tests/functional/aarch64/meson.build          |  1 +
 .../aarch64/test_virt_aarch64_off.py          | 37 +++++++++++++++++++
 2 files changed, 38 insertions(+)
 create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py

diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/tests/functional/aarch64/meson.build
+++ b/tests/functional/aarch64/meson.build
@@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [
   'tcg_plugins',
   'tuxrun',
   'virt',
+  'virt_aarch64_off',
   'virt_gpu',
   'virt_vbsa',
   'xen',
diff --git a/tests/functional/aarch64/test_virt_aarch64_off.py b/tests/functional/aarch64/test_virt_aarch64_off.py
new file mode 100755
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/functional/aarch64/test_virt_aarch64_off.py
@@ -XXX,XX +XXX,XX @@
+#!/usr/bin/env python3
+#
+# Functional test that boots an AArch32 Linux kernel and checks the console
+# on a TCG aarch64 CPU with aarch64=off. This is the same image etc
+# as we use in tests/functional/arm/test_virt.py.
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from qemu_test import LinuxKernelTest, Asset
+
+class ArmVirtMachine(LinuxKernelTest):
+
+    ASSET_KERNEL = Asset(
+        ('https://archives.fedoraproject.org/pub/archive/fedora/linux/'
+         'releases/29/Everything/armhfp/os/images/pxeboot/vmlinuz'),
+        '18dd5f1a9a28bd539f9d047f7c0677211bae528e8712b40ca5a229a4ad8e2591')
+
+    def test_arm_virt(self):
+        self.set_machine('virt')
+        # KVM aarch64=off requires a host CPU that supports it, so
+        # restrict the test to TCG only
+        self.require_accelerator('tcg')
+        self.vm.add_args('-cpu', 'max,aarch64=off')
+
+        kernel_path = self.ASSET_KERNEL.fetch()
+
+        self.vm.set_console()
+        kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+                               'console=ttyAMA0')
+        self.vm.add_args('-kernel', kernel_path,
+                         '-append', kernel_command_line)
+        self.vm.launch()
+        console_pattern = 'Kernel command line: %s' % kernel_command_line
+        self.wait_for_console_pattern(console_pattern)
+
+if __name__ == '__main__':
+    LinuxKernelTest.main()
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

We introduce a datatype for a tolerance with respect to a given
cpreg migration issue. The tolerance applies to a given cpreg kvm index,
and can be of different types:
a) mismatch in cpreg indexes
- ToleranceNotOnBothEnds (cpreg index is allowed to be only present
  on one end)
- ToleranceOnlySrcTestValue (cpreg index is allowed to be only
  present in source if its value @mask field matches @value)
b) mismatch in cpreg values
- ToleranceDiffInMask (value differences are allowed only within a mask)
- ToleranceFieldLT (incoming field value must be less than a given value)
- ToleranceFieldGT (incoming field value must be greater than a given value)

A QLIST of such tolerances can be populated using a new helper:
arm_register_cpreg_mig_tolerance() and arm_cpu_match_cpreg_mig_tolerance()
allows to check whether a tolerance exists for a given kvm index and its
criterion is matched.

callers for those helpers will be introduced in subsequent patches.

Only registration of migration tolerances related to cpreg index
mismatch is currently allowed.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20260420140552.104369-2-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.c       | 82 ++++++++++++++++++++++++++++++++++++++++++
 target/arm/cpu.h       |  1 +
 target/arm/internals.h | 54 ++++++++++++++++++++++++++++
 3 files changed, 137 insertions(+)

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook,
     QLIST_INSERT_HEAD(&cpu->el_change_hooks, entry, node);
 }
 
+static ARMCPRegMigTolerance *find_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx)
+{
+    ARMCPRegMigTolerance *t;
+    QLIST_FOREACH(t, &cpu->cpreg_mig_tolerances, node) {
+        if (t->kvmidx == kvmidx)  {
+            return t;
+        }
+    }
+    return NULL;
+}
+
+void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                      uint64_t mask, uint64_t value,
+                                      ARMCPRegMigToleranceType type)
+{
+    ARMCPRegMigTolerance *entry;
+
+    /* make sure the kvmidx has not tolerance already registered */
+    assert(!find_mig_tolerance(cpu, kvmidx));
+
+    assert(type == ToleranceNotOnBothEnds ||
+           type == ToleranceOnlySrcTestValue);
+
+    entry = g_new0(ARMCPRegMigTolerance, 1);
+
+    entry->kvmidx = kvmidx;
+    entry->mask = mask;
+    entry->value = value;
+    entry->type = type;
+
+    QLIST_INSERT_HEAD(&cpu->cpreg_mig_tolerances, entry, node);
+}
+
+bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                       uint64_t vmstate_value, uint64_t local_value,
+                                       ARMCPRegMigToleranceType type)
+{
+    ARMCPRegMigTolerance *t = find_mig_tolerance(cpu, kvmidx);
+    uint64_t diff, diff_outside_mask, field;
+
+    if (!t || t->type != type) {
+        return false;
+    }
+
+    if (type == ToleranceNotOnBothEnds) {
+        return true;
+    }
+
+    if (type == ToleranceOnlySrcTestValue &&
+        ((vmstate_value & t->mask) == t->value)) {
+        return true;
+    }
+
+    /* Need to check the mask */
+    diff = vmstate_value ^ local_value;
+    diff_outside_mask = diff & ~t->mask;
+
+    if (diff_outside_mask) {
+        /* there are differences outside of the mask */
+        return false;
+    }
+    if (type == ToleranceDiffInMask) {
+        /* differences only in the field, tolerance matched */
+        return true;
+    }
+    /* need to compare field value against authorized ones */
+    field = vmstate_value & t->mask;
+    if (type == ToleranceFieldLT && (field < t->value)) {
+        return true;
+    }
+    if (type == ToleranceFieldGT && (field > t->value)) {
+        return true;
+    }
+    return false;
+}
+
 static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque)
 {
     /* Reset a single ARMCPRegInfo register */
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj)
 
     QLIST_INIT(&cpu->pre_el_change_hooks);
     QLIST_INIT(&cpu->el_change_hooks);
+    QLIST_INIT(&cpu->cpreg_mig_tolerances);
 
 #ifdef CONFIG_USER_ONLY
 # ifdef TARGET_AARCH64
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
     ARMELChangeHook *hook, *next;
+    ARMCPRegMigTolerance *t, *n;
 
     g_hash_table_destroy(cpu->cp_regs);
 
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj)
         QLIST_REMOVE(hook, node);
         g_free(hook);
     }
+    QLIST_FOREACH_SAFE(t, &cpu->cpreg_mig_tolerances, node, n) {
+        QLIST_REMOVE(t, node);
+        g_free(t);
+    }
 #ifndef CONFIG_USER_ONLY
     if (cpu->pmu_timer) {
         timer_free(cpu->pmu_timer);
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ struct ArchCPU {
 
     QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks;
     QLIST_HEAD(, ARMELChangeHook) el_change_hooks;
+    QLIST_HEAD(, ARMCPRegMigTolerance) cpreg_mig_tolerances;
 
     int32_t node_id; /* NUMA node this CPU belongs to */
 
diff --git a/target/arm/internals.h b/target/arm/internals.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -XXX,XX +XXX,XX @@ int compare_u64(const void *a, const void *b);
 /* Used in FEAT_MEC to set the MECIDWidthm1 field in the MECIDR_EL2 register. */
 #define MECID_WIDTH 16
 
+typedef enum {
+    ToleranceNotOnBothEnds,
+    ToleranceOnlySrcTestValue,
+    ToleranceDiffInMask,
+    ToleranceFieldLT,
+    ToleranceFieldGT,
+} ARMCPRegMigToleranceType;
+
+typedef struct ARMCPRegMigTolerance {
+    uint64_t kvmidx;
+    uint64_t mask;
+    uint64_t value;
+    ARMCPRegMigToleranceType type;
+    QLIST_ENTRY(ARMCPRegMigTolerance) node;
+} ARMCPRegMigTolerance;
+
+/**
+ * arm_register_cpreg_mig_tolerance:
+ * Register a migration tolerance wrt one given cpreg identified by its
+ * @kvmidx. Calling this function twice for the same @kvmidx is a
+ * programming error and will cause an assertion failure.
+ *
+ * @cpu: vcpu to apply the migration tolerance on
+ * @kvmidx: kvm index of the cpreg the tolerance applies to
+ * @mask: bitmask where a difference is tolerated
+ *        (relevant with ToleranceDiffInMask)
+ * @value: value the bitmask field is compared with
+ *        (relevant with ToleranceFieldLT and ToleranceFieldGT)
+ * @type: type of the migration tolerance:
+ * - ToleranceNotOnBothEnds (cpreg index is allowed to be only present
+ *   on one end)
+ * - ToleranceOnlySrcTestValue (cpreg index is allowed to be only
+ *   present in source if its value @mask field matches @value)
+ * - ToleranceDiffInMask (mismatch in cpreg values are only tolerated
+ *   if differences are within @mask)
+ * - ToleranceFieldLT (mismatch in cpreg values are only tolerated
+ *   if incoming @bitmask field value is less than @value)
+ * - ToleranceFieldGT (mismatch in cpreg values are only tolerated
+ *   if incoming @bitmask field value is greater than @value)
+ */
+void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                      uint64_t mask, uint64_t value,
+                                      ARMCPRegMigToleranceType type);
+
+/**
+ * arm_cpu_match_cpreg_mig_tolerance:
+ * Check whether a tolerance of type @type exists for a given @kvmidx
+ * and the tolerance criterion is satisfied
+ */
+bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx,
+                                       uint64_t vmstate_value, uint64_t local_value,
+                                       ARMCPRegMigToleranceType type);
+
+
 #endif
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

If there is a mismatch between the cpreg indexes found on both ends,
check whether a tolerance was registered for the given kvmidx. If any,
silence warning/errors.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-3-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/machine.c    | 21 +++++++++++++++------
 target/arm/trace-events |  2 ++
 2 files changed, 17 insertions(+), 6 deletions(-)

diff --git a/target/arm/machine.c b/target/arm/machine.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx
 {
     g_autofree gchar *name = print_register_name(kvmidx);
 
+    if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
+                                          0, 0, ToleranceNotOnBothEnds)) {
+        trace_tolerate_cpreg_missing_in_incoming_stream(name);
+        return;
+    }
     warn_report("%s: %s "
                 "expected by the destination but not in the incoming stream: "
                  "skip it", __func__, name);
 }
 
 /*
- * Handle the situation where @kvmidx is in the incoming stream
- * but not on destination. This currently fails the migration but
- * we plan to accomodate some exceptions, hence the boolean returned value.
+ * Handle the situation where @kvmidx is in the incoming
+ * stream but not on destination. This fails the migration if
+ * no cpreg mig tolerance is matched for this @kvmidx
+ * Return true if the migration should eventually fail
  */
 static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx)
 {
     g_autofree gchar *name = print_register_name(kvmidx);
-    bool fail = true;
 
+    if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
+                                          0, 0, ToleranceNotOnBothEnds)) {
+        trace_tolerate_cpreg_only_in_incoming_stream(name);
+        return false;
+    }
     error_report("%s: %s in the incoming stream but unknown on the "
                  "destination: fail migration", __func__, name);
-
-    return fail;
+    return true;
 }
 
 static int cpu_post_load(void *opaque, int version_id)
diff --git a/target/arm/trace-events b/target/arm/trace-events
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/trace-events
+++ b/target/arm/trace-events
@@ -XXX,XX +XXX,XX @@ arm_psci_call(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3, uint32_t cpuid
 
 # machine.c
 cpu_post_load(uint32_t cpreg_vmstate_array_len, uint32_t cpreg_array_len) "cpreg_vmstate_array_len=%d cpreg_array_len=%d"
+tolerate_cpreg_missing_in_incoming_stream(char *name) "%s is missing in incoming stream but this is explicitly tolerated"
+tolerate_cpreg_only_in_incoming_stream(char *name) "%s is in incoming stream but not on destination but this is explicitly tolerated"
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

Pass the value of the incoming register to
handle_cpreg_only_in_incoming_stream and check whether there is
a matching ToleranceOnlySrcTestValue tolerance.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20260420140552.104369-4-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/machine.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/target/arm/machine.c b/target/arm/machine.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx
  * no cpreg mig tolerance is matched for this @kvmidx
  * Return true if the migration should eventually fail
  */
-static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx)
+static bool
+handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx, uint64_t value)
 {
     g_autofree gchar *name = print_register_name(kvmidx);
 
     if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
-                                          0, 0, ToleranceNotOnBothEnds)) {
+                                          0, 0, ToleranceNotOnBothEnds) ||
+        arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx,
+                                          value, 0, ToleranceOnlySrcTestValue)) {
         trace_tolerate_cpreg_only_in_incoming_stream(name);
         return false;
     }
@@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id)
         }
         if (cpu->cpreg_vmstate_indexes[v] < cpu->cpreg_indexes[i]) {
             fail = handle_cpreg_only_in_incoming_stream(cpu,
-                                                        cpu->cpreg_vmstate_indexes[v++]);
+                                                        cpu->cpreg_vmstate_indexes[v],
+                                                        cpu->cpreg_vmstate_values[v]);
+            v++;
             continue;
         }
         /* matching register, copy the value over */
@@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id)
      */
     for ( ; v < cpu->cpreg_vmstate_array_len; v++) {
         fail = handle_cpreg_only_in_incoming_stream(cpu,
-                                                    cpu->cpreg_vmstate_indexes[v]);
+                                                    cpu->cpreg_vmstate_indexes[v],
+                                                    cpu->cpreg_vmstate_values[v]);
     }
     if (fail) {
         return -1;
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

Before linux v6.13 those registers were erroneously unconditionally
exposed and this was fixed by commits:
- 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace when
                 disabled for guests")
- a68cddbe47ef ("KVM: arm64: Hide S1PIE registers from userspace
                 when disabled for guests")
in v6.13.

This means if we migrate from an old kernel host to a >= 6.13 kernel
host, migration currently fails.

Declare cpreg migration tolerance for those registers.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-5-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu64.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj)
     define_cortex_a72_a57_a53_cp_reginfo(cpu);
 }
 
+#if defined(CONFIG_KVM)
+static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu)
+{
+    /*
+     * Registers that may be in the incoming stream and not exposed
+     * on the destination
+     */
+
+    /*
+     * TCR_EL1 was erroneously unconditionnally exposed before linux v6.13.
+     * See commit 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace
+     * when disabled for guests")
+     */
+    arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 2, 0, 3),
+                                     0, 0, ToleranceNotOnBothEnds);
+    /*
+     * PIRE0_EL1 and PIR_EL1 were erroneously unconditionnally exposed
+     * before linux v6.13. See commit a68cddbe47ef ("KVM: arm64: Hide
+     * S1PIE registers from userspace when disabled for guests")
+     */
+    arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 2),
+                                     0, 0, ToleranceNotOnBothEnds);
+    arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3),
+                                     0, 0, ToleranceNotOnBothEnds);
+}
+#endif
+
 static void aarch64_host_initfn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
@@ -XXX,XX +XXX,XX @@ static void aarch64_host_initfn(Object *obj)
 #endif
 
 #if defined(CONFIG_KVM)
+    kvm_arm_set_cpreg_mig_tolerances(cpu);
     kvm_arm_set_cpu_features_from_host(cpu);
     aarch64_add_sve_properties(obj);
 #elif defined(CONFIG_HVF)
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed
from v6.15 onwards. Backward migration from a >= v6.15 to an older
kernel would fail without cpreg migration tolerance definition
for this register. If the register is present on source but not
on destination, its value must be checked to make sure it matches
the reset value, ie. 0, meaning no service is exposed to the guest,
hence the choice of a ToleranceOnlySrcTestValue migration
tolerance.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-6-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu64.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -XXX,XX +XXX,XX @@ static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu)
                                      0, 0, ToleranceNotOnBothEnds);
     arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3),
                                      0, 0, ToleranceNotOnBothEnds);
+
+    /*
+     * KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed
+     * from v6.15 onwards. Backward migration from a >= v6.15 to an older
+     * kernel would fail without cpreg migration tolerance definition.
+     * If the register is present on source but not on destination, make
+     * sure it has its reset value, ie. 0, meaning no service is exposed
+     * to the guest.
+     */
+    arm_register_cpreg_mig_tolerance(cpu, KVM_REG_ARM_FW_FEAT_BMAP_REG(3),
+                                     UINT64_MAX, 0, ToleranceOnlySrcTestValue);
 }
 #endif
 
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

We want to remove AArch32 DBGDTRTX which was erroneously exposed.
This was attempted by 655659a74a36b ("target/arm: Correct encoding
of Debug Communications Channel registers") but it was discovered
that the removal of this debug register broke forward migration on
TCG. Now we have the cpreg migration tolerance infrastructure, we
can declare one for the DBGDTRTX. This allow to revert the reinstate
patch.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-7-eric.auger@redhat.com
[PMM: revised comment, included note about when we can drop
 the workaround]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
             .fgt = FGT_CLIDR_EL1,
             .resetvalue = GET_IDREG(isar, CLIDR)
         };
+        uint64_t dbgtr_el0_kvmidx =
+            cpreg_to_kvm_id(ENCODE_CP_REG(14, 0, 1, 0, 5, 3, 0));
+
         define_one_arm_cp_reg(cpu, &clidr);
         define_arm_cp_regs(cpu, v7_cp_reginfo);
         define_debug_regs(cpu);
+        /*
+         * We used to incorrectly expose a non-existent AArch32 "DBGDTRTX"
+         * register with this encoding. This has been fixed by commit
+         * 655659a74a36 ("target/arm: Correct encoding of Debug
+         * Communications Channel registers") by the introduction of correct
+         * separate cpreg definitions for AA64 and AA32 versions. However,
+         * the old cpreg definition couldn't be removed without breaking
+         * migration, so commit 4f2b82f604 reinstated the bogus encoding
+         * for migration data only.
+         *
+         * Now that we have migration tolerance infrastructure, we can use
+         * this to allow forward migration from the buggy QEMU versions,
+         * accepting and ignoring the bogus register if it is in the
+         * source data. QEMU 11.0 was the last version that sent the
+         * bogus encoding, so this workaround can be removed at the point
+         * where we no longer care about migration from that version
+         * (i.e. when we remove the "virt-11.0" machine type).
+         */
+        arm_register_cpreg_mig_tolerance(cpu, dbgtr_el0_kvmidx,
+                                         0, 0, ToleranceNotOnBothEnds);
     } else {
         define_arm_cp_regs(cpu, not_v7_cp_reginfo);
     }
-- 
2.43.0

From: Eric Auger <eric.auger@redhat.com>

This reverts commit 4f2b82f60431 ("target/arm: Reinstate bogus AArch32
DBGDTRTX register for migration compat). We don't need that commit
anymore as the AArch32 DBGDTRTX register is declared to
be safe to ignore in the incoming migration stream.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20260420140552.104369-8-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/debug_helper.c | 29 -----------------------------
 1 file changed, 29 deletions(-)

diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/debug_helper.c
+++ b/target/arm/debug_helper.c
@@ -XXX,XX +XXX,XX @@ static void dbgclaimclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
     env->cp15.dbgclaim &= ~(value & 0xFF);
 }
 
-static CPAccessResult access_bogus(CPUARMState *env, const ARMCPRegInfo *ri,
-                                   bool isread)
-{
-    /* Always UNDEF, as if this cpreg didn't exist */
-    return CP_ACCESS_UNDEFINED;
-}
-
 static const ARMCPRegInfo debug_cp_reginfo[] = {
     /*
      * DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = {
       .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 4, .opc2 = 0,
       .access = PL0_RW, .accessfn = access_tdcc,
       .type = ARM_CP_CONST, .resetvalue = 0 },
-    /*
-     * This is not a real AArch32 register. We used to incorrectly expose
-     * this due to a QEMU bug; to avoid breaking migration compatibility we
-     * need to continue to provide it so that we don't fail the inbound
-     * migration when it tells us about a sysreg that we don't have.
-     * We set an always-fails .accessfn, which means that the guest doesn't
-     * actually see this register (it will always UNDEF, identically to if
-     * there were no cpreg definition for it other than that we won't print
-     * a LOG_UNIMP message about it), and we set the ARM_CP_NO_GDB flag so the
-     * gdbstub won't see it either.
-     * (We can't just set .access = 0, because add_cpreg_to_hashtable()
-     * helpfully ignores cpregs which aren't accessible to the highest
-     * implemented EL.)
-     *
-     * TODO: implement a system for being able to describe "this register
-     * can be ignored if it appears in the inbound stream"; then we can
-     * remove this temporary hack.
-     */
-    { .name = "BOGUS_DBGDTR_EL0", .state = ARM_CP_STATE_AA32,
-      .cp = 14, .opc1 = 3, .crn = 0, .crm = 5, .opc2 = 0,
-      .access = PL0_RW, .accessfn = access_bogus,
-      .type = ARM_CP_CONST | ARM_CP_NO_GDB, .resetvalue = 0 },
     /*
      * OSECCR_EL1 provides a mechanism for an operating system
      * to access the contents of EDECCR. EDECCR is not implemented though,
-- 
2.43.0

From: Osama Abdelkader <osama.abdelkader@gmail.com>

fdt_node_offset_by_compatible(fdt, -1, compat) only finds the first match.
If the blob has more than one node with the same compatible string, extra
nodes will remain active. Remove all the matching nodes, using the same
loop as imx8mp-evk.c does for this purpose.

Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Message-id: 20260420162114.308519-1-osama.abdelkader@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/raspi4b.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/raspi4b.c
+++ b/hw/arm/raspi4b.c
@@ -XXX,XX +XXX,XX @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt)
 
     for (int i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) {
         const char *dev_str = nodes_to_remove[i];
+        int offset;
 
-        int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
-        if (offset >= 0) {
-            if (!fdt_nop_node(fdt, offset)) {
-                warn_report("bcm2711 dtc: %s has been disabled!", dev_str);
+        offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
+        while (offset >= 0) {
+            if (fdt_nop_node(fdt, offset) == 0) {
+                warn_report("bcm2711 dtb: %s has been disabled!", dev_str);
             }
+            offset = fdt_node_offset_by_compatible(fdt, offset, dev_str);
         }
     }
 
-- 
2.43.0

From: Yucai Liu <1486344514@qq.com>

Implement a basic i.MX6UL LCDIF controller model with MMIO registers,
frame-done interrupt behavior, and framebuffer-backed display updates
for RGB565 and XRGB8888 input formats.

Place the LCDIF device under hw/display and build it via a dedicated
CONFIG_IMX6UL_LCDIF symbol. Model register fields with
registerfields.h helpers and provide migration support via vmstate.

Signed-off-by: Yucai Liu <1486344514@qq.com>
Message-id: 20260412110240.93116-2-yangyanglan718@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 MAINTAINERS                       |   2 +
 hw/display/Kconfig                |   4 +
 hw/display/imx6ul_lcdif.c         | 453 ++++++++++++++++++++++++++++++
 hw/display/meson.build            |   1 +
 include/hw/display/imx6ul_lcdif.h |  37 +++
 5 files changed, 497 insertions(+)
 create mode 100644 hw/display/imx6ul_lcdif.c
 create mode 100644 include/hw/display/imx6ul_lcdif.h

diff --git a/MAINTAINERS b/MAINTAINERS
index XXXXXXX..XXXXXXX 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org
 S: Odd Fixes
 F: hw/arm/mcimx6ul-evk.c
 F: hw/arm/fsl-imx6ul.c
+F: hw/display/imx6ul_lcdif.c
 F: hw/misc/imx6ul_ccm.c
 F: include/hw/arm/fsl-imx6ul.h
+F: include/hw/display/imx6ul_lcdif.h
 F: include/hw/misc/imx6ul_ccm.h
 F: docs/system/arm/mcimx6ul-evk.rst
 
diff --git a/hw/display/Kconfig b/hw/display/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/display/Kconfig
+++ b/hw/display/Kconfig
@@ -XXX,XX +XXX,XX @@ config PL110
     bool
     select FRAMEBUFFER
 
+config IMX6UL_LCDIF
+    bool
+    select FRAMEBUFFER
+
 config SII9022
     bool
     depends on I2C
diff --git a/hw/display/imx6ul_lcdif.c b/hw/display/imx6ul_lcdif.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/display/imx6ul_lcdif.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * i.MX6UL LCDIF controller
+ *
+ * Copyright (c) 2026 Yucai Liu <1486344514@qq.com>
+ */
+
+#include "qemu/osdep.h"
+#include "hw/display/imx6ul_lcdif.h"
+#include "hw/core/irq.h"
+#include "hw/core/registerfields.h"
+#include "hw/display/framebuffer.h"
+#include "migration/vmstate.h"
+#include "system/address-spaces.h"
+#include "qemu/module.h"
+#include "qemu/units.h"
+#include "ui/pixel_ops.h"
+
+#define LCDIF_MMIO_SIZE             (16 * KiB)
+#define LCDIF_RESET_CTRL1           0x000f0000
+
+REG32(CTRL, 0x00)
+    FIELD(CTRL, RUN, 0, 1)
+    FIELD(CTRL, WORD_LENGTH, 8, 2)
+REG32(CTRL1, 0x10)
+    FIELD(CTRL1, CUR_FRAME_DONE_IRQ, 9, 1)
+    FIELD(CTRL1, CUR_FRAME_DONE_IRQ_EN, 13, 1)
+    FIELD(CTRL1, BYTE_PACKING_FORMAT, 16, 4)
+REG32(V4_TRANSFER_COUNT, 0x30)
+    FIELD(V4_TRANSFER_COUNT, H_COUNT, 0, 16)
+    FIELD(V4_TRANSFER_COUNT, V_COUNT, 16, 16)
+REG32(V4_CUR_BUF, 0x40)
+REG32(V4_NEXT_BUF, 0x50)
+REG32(AS_NEXT_BUF, 0x230)
+
+#define REG_SET                     0x4
+#define REG_CLR                     0x8
+#define REG_TOG                     0xc
+
+#define CTRL_WORD_LENGTH_16         0
+#define CTRL_WORD_LENGTH_24         3
+
+#define FRAME_PERIOD_NS             (16 * 1000 * 1000ULL)
+
+enum IMX6ULLCDIFReg {
+    IMX6UL_LCDIF_REG_CTRL = A_CTRL >> 4,
+    IMX6UL_LCDIF_REG_CTRL1 = A_CTRL1 >> 4,
+    IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT = A_V4_TRANSFER_COUNT >> 4,
+    IMX6UL_LCDIF_REG_V4_CUR_BUF = A_V4_CUR_BUF >> 4,
+    IMX6UL_LCDIF_REG_V4_NEXT_BUF = A_V4_NEXT_BUF >> 4,
+    IMX6UL_LCDIF_REG_AS_NEXT_BUF = A_AS_NEXT_BUF >> 4,
+};
+
+static inline bool imx6ul_lcdif_reg_exists(hwaddr reg)
+{
+    return (reg >> 4) < IMX6UL_LCDIF_REGS_NUM;
+}
+
+static inline bool imx6ul_lcdif_reg_has_setclr(hwaddr reg)
+{
+    switch (reg) {
+    case A_CTRL:
+    case A_CTRL1:
+        return true;
+    default:
+        return false;
+    }
+}
+
+static inline bool imx6ul_lcdif_is_running(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL];
+
+    return FIELD_EX32(ctrl, CTRL, RUN);
+}
+
+static inline bool imx6ul_lcdif_frame_done_pending(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1];
+
+    return FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ);
+}
+
+static void imx6ul_lcdif_schedule_frame(IMX6ULLCDIFState *s)
+{
+    int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+
+    timer_mod(s->frame_timer, now + FRAME_PERIOD_NS);
+}
+
+static void imx6ul_lcdif_maybe_schedule_frame(IMX6ULLCDIFState *s)
+{
+    if (imx6ul_lcdif_is_running(s) && !imx6ul_lcdif_frame_done_pending(s)) {
+        imx6ul_lcdif_schedule_frame(s);
+    } else {
+        timer_del(s->frame_timer);
+    }
+}
+
+static void imx6ul_lcdif_update_irq(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1];
+    bool level = FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ_EN) &&
+                 FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ);
+
+    qemu_set_irq(s->irq, level);
+}
+
+static void imx6ul_lcdif_frame_done(IMX6ULLCDIFState *s)
+{
+    uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1];
+
+    ctrl1 = FIELD_DP32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ, 1);
+    s->regs[IMX6UL_LCDIF_REG_CTRL1] = ctrl1;
+    imx6ul_lcdif_update_irq(s);
+}
+
+static void imx6ul_lcdif_draw_line_rgb565(void *opaque, uint8_t *dst,
+                                          const uint8_t *src, int width,
+                                          int dststep)
+{
+    uint32_t *dst32 = (uint32_t *)dst;
+    int i;
+
+    for (i = 0; i < width; i++) {
+        uint16_t pixel = lduw_le_p(src);
+        uint8_t r = ((pixel >> 11) & 0x1f) << 3;
+        uint8_t g = ((pixel >> 5) & 0x3f) << 2;
+        uint8_t b = (pixel & 0x1f) << 3;
+
+        *dst32++ = rgb_to_pixel32(r, g, b);
+        src += 2;
+    }
+}
+
+static void imx6ul_lcdif_draw_line_xrgb8888(void *opaque, uint8_t *dst,
+                                            const uint8_t *src, int width,
+                                            int dststep)
+{
+    uint32_t *dst32 = (uint32_t *)dst;
+    int i;
+
+    for (i = 0; i < width; i++) {
+        uint32_t pixel = ldl_le_p(src);
+        uint8_t r = (pixel >> 16) & 0xff;
+        uint8_t g = (pixel >> 8) & 0xff;
+        uint8_t b = pixel & 0xff;
+
+        *dst32++ = rgb_to_pixel32(r, g, b);
+        src += 4;
+    }
+}
+
+static void imx6ul_lcdif_update_display(void *opaque)
+{
+    IMX6ULLCDIFState *s = opaque;
+    DisplaySurface *surface = qemu_console_surface(s->con);
+    uint32_t transfer_count = s->regs[IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT];
+    uint32_t width = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, H_COUNT);
+    uint32_t height = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, V_COUNT);
+    uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL];
+    uint32_t frame_base = s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF];
+    drawfn fn;
+    int first = 0;
+    int last = 0;
+    int src_width;
+
+    if (!imx6ul_lcdif_is_running(s) || width == 0 || height == 0) {
+        return;
+    }
+
+    switch (FIELD_EX32(ctrl, CTRL, WORD_LENGTH)) {
+    case CTRL_WORD_LENGTH_16:
+        s->src_bpp = 2;
+        fn = imx6ul_lcdif_draw_line_rgb565;
+        break;
+    case CTRL_WORD_LENGTH_24:
+        s->src_bpp = 4;
+        fn = imx6ul_lcdif_draw_line_xrgb8888;
+        break;
+    default:
+        return;
+    }
+
+    if (surface_width(surface) != width || surface_height(surface) != height) {
+        qemu_console_resize(s->con, width, height);
+        surface = qemu_console_surface(s->con);
+        s->invalidate = true;
+    }
+
+    src_width = width * s->src_bpp;
+    if (s->invalidate || s->fb_base != frame_base ||
+        s->src_width != src_width || s->rows != height) {
+        framebuffer_update_memory_section(&s->fbsection, get_system_memory(),
+                                          frame_base, height, src_width);
+        s->fb_base = frame_base;
+        s->src_width = src_width;
+        s->rows = height;
+    }
+
+    framebuffer_update_display(surface, &s->fbsection, width, height,
+                               src_width, surface_stride(surface), 0,
+                               s->invalidate, fn, s, &first, &last);
+    if (first >= 0) {
+        dpy_gfx_update(s->con, 0, first, width, last - first + 1);
+    }
+
+    s->invalidate = false;
+}
+
+static void imx6ul_lcdif_invalidate_display(void *opaque)
+{
+    IMX6ULLCDIFState *s = opaque;
+
+    s->invalidate = true;
+}
+
+static const GraphicHwOps imx6ul_lcdif_graphic_ops = {
+    .invalidate = imx6ul_lcdif_invalidate_display,
+    .gfx_update = imx6ul_lcdif_update_display,
+};
+
+static void imx6ul_lcdif_frame_timer_cb(void *opaque)
+{
+    IMX6ULLCDIFState *s = opaque;
+
+    if (!imx6ul_lcdif_is_running(s) || imx6ul_lcdif_frame_done_pending(s)) {
+        return;
+    }
+
+    imx6ul_lcdif_frame_done(s);
+}
+
+static uint64_t imx6ul_lcdif_read(void *opaque, hwaddr offset, unsigned size)
+{
+    IMX6ULLCDIFState *s = opaque;
+    hwaddr reg = offset & ~0xf;
+    uint32_t idx;
+
+    assert(size == 4);
+    assert(!(offset & 0x3));
+    assert(offset < LCDIF_MMIO_SIZE);
+
+    idx = reg >> 4;
+    if (idx >= ARRAY_SIZE(s->regs)) {
+        return 0;
+    }
+
+    return s->regs[idx];
+}
+
+static void imx6ul_lcdif_write(void *opaque, hwaddr offset,
+                               uint64_t value, unsigned size)
+{
+    IMX6ULLCDIFState *s = opaque;
+    hwaddr reg = offset & ~0xf;
+    uint32_t idx;
+    uint32_t oldv;
+
+    assert(size == 4);
+    assert(!(offset & 0x3));
+    assert(offset < LCDIF_MMIO_SIZE);
+
+    if (!imx6ul_lcdif_reg_exists(reg)) {
+        return;
+    }
+
+    idx = reg >> 4;
+    oldv = s->regs[idx];
+
+    switch (offset & 0xf) {
+    case 0:
+        s->regs[idx] = (uint32_t)value;
+        break;
+    case REG_SET:
+        if (!imx6ul_lcdif_reg_has_setclr(reg)) {
+            return;
+        }
+        s->regs[idx] = oldv | (uint32_t)value;
+        break;
+    case REG_CLR:
+        if (!imx6ul_lcdif_reg_has_setclr(reg)) {
+            return;
+        }
+        s->regs[idx] = oldv & ~(uint32_t)value;
+        break;
+    case REG_TOG:
+        if (!imx6ul_lcdif_reg_has_setclr(reg)) {
+            return;
+        }
+        s->regs[idx] = oldv ^ (uint32_t)value;
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    switch (reg) {
+    case A_CTRL:
+        if (!FIELD_EX32(oldv, CTRL, RUN) &&
+            FIELD_EX32(s->regs[idx], CTRL, RUN)) {
+            s->invalidate = true;
+            graphic_hw_invalidate(s->con);
+            imx6ul_lcdif_maybe_schedule_frame(s);
+            break;
+        }
+        if (FIELD_EX32(oldv, CTRL, RUN) &&
+            !FIELD_EX32(s->regs[idx], CTRL, RUN)) {
+            timer_del(s->frame_timer);
+        }
+        break;
+    case A_CTRL1:
+        if (FIELD_EX32(oldv, CTRL1, CUR_FRAME_DONE_IRQ) &&
+            !FIELD_EX32(s->regs[idx], CTRL1, CUR_FRAME_DONE_IRQ)) {
+            imx6ul_lcdif_maybe_schedule_frame(s);
+        }
+        break;
+    case A_V4_TRANSFER_COUNT:
+        s->invalidate = true;
+        graphic_hw_invalidate(s->con);
+        break;
+    case A_V4_CUR_BUF:
+        s->invalidate = true;
+        graphic_hw_invalidate(s->con);
+        break;
+    case A_V4_NEXT_BUF:
+        s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF] = s->regs[idx];
+        imx6ul_lcdif_frame_done(s);
+        s->invalidate = true;
+        graphic_hw_invalidate(s->con);
+        imx6ul_lcdif_maybe_schedule_frame(s);
+        return;
+    case A_AS_NEXT_BUF:
+        imx6ul_lcdif_frame_done(s);
+        imx6ul_lcdif_maybe_schedule_frame(s);
+        return;
+    default:
+        break;
+    }
+
+    imx6ul_lcdif_update_irq(s);
+}
+
+static const MemoryRegionOps imx6ul_lcdif_ops = {
+    .read = imx6ul_lcdif_read,
+    .write = imx6ul_lcdif_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+        .unaligned = false,
+    },
+};
+
+static void imx6ul_lcdif_reset(DeviceState *dev)
+{
+    IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev);
+
+    memset(s->regs, 0, sizeof(s->regs));
+    s->regs[IMX6UL_LCDIF_REG_CTRL1] = LCDIF_RESET_CTRL1;
+    s->fb_base = 0;
+    s->src_width = 0;
+    s->rows = 0;
+    s->src_bpp = 0;
+    s->invalidate = true;
+    timer_del(s->frame_timer);
+    imx6ul_lcdif_update_irq(s);
+}
+
+static int imx6ul_lcdif_post_load(void *opaque, int version_id)
+{
+    IMX6ULLCDIFState *s = opaque;
+
+    s->fb_base = 0;
+    s->src_width = 0;
+    s->rows = 0;
+    s->src_bpp = 0;
+    s->invalidate = true;
+
+    imx6ul_lcdif_update_irq(s);
+    if (imx6ul_lcdif_is_running(s) &&
+        !imx6ul_lcdif_frame_done_pending(s) &&
+        !timer_pending(s->frame_timer)) {
+        imx6ul_lcdif_schedule_frame(s);
+    }
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_imx6ul_lcdif = {
+    .name = TYPE_IMX6UL_LCDIF,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .post_load = imx6ul_lcdif_post_load,
+    .fields = (const VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, IMX6ULLCDIFState, IMX6UL_LCDIF_REGS_NUM),
+        VMSTATE_TIMER_PTR(frame_timer, IMX6ULLCDIFState),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static void imx6ul_lcdif_realize(DeviceState *dev, Error **errp)
+{
+    IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev);
+
+    s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
+                                  imx6ul_lcdif_frame_timer_cb, s);
+    s->invalidate = true;
+    memory_region_init_io(&s->iomem, OBJECT(dev), &imx6ul_lcdif_ops, s,
+                          TYPE_IMX6UL_LCDIF, LCDIF_MMIO_SIZE);
+    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
+    sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
+    s->con = graphic_console_init(dev, 0, &imx6ul_lcdif_graphic_ops, s);
+}
+
+static void imx6ul_lcdif_unrealize(DeviceState *dev)
+{
+    IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev);
+
+    timer_del(s->frame_timer);
+    timer_free(s->frame_timer);
+    s->frame_timer = NULL;
+
+    if (s->con) {
+        graphic_console_close(s->con);
+        s->con = NULL;
+    }
+}
+
+static void imx6ul_lcdif_class_init(ObjectClass *klass, const void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = imx6ul_lcdif_realize;
+    dc->unrealize = imx6ul_lcdif_unrealize;
+    dc->vmsd = &vmstate_imx6ul_lcdif;
+    device_class_set_legacy_reset(dc, imx6ul_lcdif_reset);
+    dc->desc = "i.MX6UL LCDIF";
+}
+
+static const TypeInfo imx6ul_lcdif_info = {
+    .name = TYPE_IMX6UL_LCDIF,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(IMX6ULLCDIFState),
+    .class_init = imx6ul_lcdif_class_init,
+};
+
+static void imx6ul_lcdif_register_types(void)
+{
+    type_register_static(&imx6ul_lcdif_info);
+}
+
+type_init(imx6ul_lcdif_register_types)
diff --git a/hw/display/meson.build b/hw/display/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/display/meson.build
+++ b/hw/display/meson.build
@@ -XXX,XX +XXX,XX @@ system_ss.add(when: ['CONFIG_VGA_CIRRUS', 'CONFIG_VGA_ISA'], if_true: files('cir
 system_ss.add(when: 'CONFIG_G364FB', if_true: files('g364fb.c'))
 system_ss.add(when: 'CONFIG_JAZZ_LED', if_true: files('jazz_led.c'))
 system_ss.add(when: 'CONFIG_PL110', if_true: files('pl110.c'))
+system_ss.add(when: 'CONFIG_IMX6UL_LCDIF', if_true: files('imx6ul_lcdif.c'))
 system_ss.add(when: 'CONFIG_SII9022', if_true: files('sii9022.c'))
 system_ss.add(when: 'CONFIG_SSD0303', if_true: files('ssd0303.c'))
 system_ss.add(when: 'CONFIG_SSD0323', if_true: files('ssd0323.c'))
diff --git a/include/hw/display/imx6ul_lcdif.h b/include/hw/display/imx6ul_lcdif.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/display/imx6ul_lcdif.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * i.MX6UL LCDIF controller
+ *
+ * Copyright (c) 2026 Yucai Liu <1486344514@qq.com>
+ */
+
+#ifndef IMX6UL_LCDIF_H
+#define IMX6UL_LCDIF_H
+
+#include "hw/core/sysbus.h"
+#include "qom/object.h"
+#include "qemu/timer.h"
+#include "ui/console.h"
+
+#define TYPE_IMX6UL_LCDIF "imx6ul-lcdif"
+#define IMX6UL_LCDIF_REGS_NUM ((0x230 >> 4) + 1)
+OBJECT_DECLARE_SIMPLE_TYPE(IMX6ULLCDIFState, IMX6UL_LCDIF)
+
+struct IMX6ULLCDIFState {
+    SysBusDevice parent_obj;
+
+    MemoryRegion iomem;
+    MemoryRegionSection fbsection;
+    qemu_irq irq;
+    QemuConsole *con;
+    QEMUTimer *frame_timer;
+    uint32_t fb_base;
+    uint32_t src_width;
+    uint32_t rows;
+    uint8_t src_bpp;
+    bool invalidate;
+    uint32_t regs[IMX6UL_LCDIF_REGS_NUM];
+};
+
+#endif /* IMX6UL_LCDIF_H */
-- 
2.43.0

From: Yucai Liu <1486344514@qq.com>

Instantiate LCDIF as a child object of the i.MX6UL SoC in init and
realize it in the SoC realize path before MMIO/IRQ hookup.

Also make FSL_IMX6UL select CONFIG_IMX6UL_LCDIF and map the LCDIF
region with a 16 KiB size to match the SoC memory map.

Signed-off-by: Yucai Liu <1486344514@qq.com>
Message-id: 20260412110240.93116-3-yangyanglan718@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/Kconfig              |  1 +
 hw/arm/fsl-imx6ul.c         | 12 ++++++++++--
 include/hw/arm/fsl-imx6ul.h |  4 +++-
 3 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL
     imply I2C_DEVICES
     select A15MPCORE
     select IMX
+    select IMX6UL_LCDIF
     select IMX_FEC
     select IMX_I2C
     select IMX_USBPHY
diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx6ul.c
+++ b/hw/arm/fsl-imx6ul.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/osdep.h"
 #include "qapi/error.h"
 #include "hw/arm/fsl-imx6ul.h"
+#include "hw/display/imx6ul_lcdif.h"
 #include "hw/misc/unimp.h"
 #include "hw/usb/imx-usb-phy.h"
 #include "hw/core/boards.h"
@@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj)
         object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA);
     }
 
+    /*
+     * LCDIF
+     */
+    object_initialize_child(obj, "lcdif", &s->lcdif, TYPE_IMX6UL_LCDIF);
+
     /*
      * SDHCIs
      */
@@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp)
     /*
      * LCD
      */
-    create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR,
-                                FSL_IMX6UL_LCDIF_SIZE);
+    sysbus_realize(SYS_BUS_DEVICE(&s->lcdif), &error_abort);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->lcdif), 0, FSL_IMX6UL_LCDIF_ADDR);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->lcdif), 0,
+                       qdev_get_gpio_in(gic, FSL_IMX6UL_LCDIF_IRQ));
 
     /*
      * CSU
diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx6ul.h
+++ b/include/hw/arm/fsl-imx6ul.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/net/imx_fec.h"
 #include "hw/usb/chipidea.h"
 #include "hw/usb/imx-usb-phy.h"
+#include "hw/display/imx6ul_lcdif.h"
 #include "system/memory.h"
 #include "target/arm/cpu.h"
 #include "qom/object.h"
@@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState {
     IMX2WdtState       wdt[FSL_IMX6UL_NUM_WDTS];
     IMXUSBPHYState     usbphy[FSL_IMX6UL_NUM_USB_PHYS];
     ChipideaState      usb[FSL_IMX6UL_NUM_USBS];
+    IMX6ULLCDIFState   lcdif;
     MemoryRegion       rom;
     MemoryRegion       caam;
     MemoryRegion       ocram;
@@ -XXX,XX +XXX,XX @@ enum FslIMX6ULMemoryMap {
     FSL_IMX6UL_PXP_SIZE             = (16 * KiB),
 
     FSL_IMX6UL_LCDIF_ADDR           = 0x021C8000,
-    FSL_IMX6UL_LCDIF_SIZE           = 0x100,
+    FSL_IMX6UL_LCDIF_SIZE           = (16 * KiB),
 
     FSL_IMX6UL_CSI_ADDR             = 0x021C4000,
     FSL_IMX6UL_CSI_SIZE             = 0x100,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

We have a registerfields interface which we can use for defining
fields alongside helpers to access them. Define the basic syndrome
layout and convert the helpers that take the imm16 data directly.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-2-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 75 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 57 insertions(+), 18 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@
 #ifndef TARGET_ARM_SYNDROME_H
 #define TARGET_ARM_SYNDROME_H
 
-#include "qemu/bitops.h"
+#include "hw/core/registerfields.h"
 
 /* Valid Syndrome Register EC field values */
 enum arm_exception_class {
@@ -XXX,XX +XXX,XX @@ enum arm_exception_class {
     EC_AA64_BKPT              = 0x3c,
 };
 
+/* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */
+FIELD(SYNDROME, EC, 26, 6)
+FIELD(SYNDROME, IL, 25, 1)
+FIELD(SYNDROME, ISS, 0, 25)
+
 typedef enum {
     SME_ET_AccessTrap,
     SME_ET_Streaming,
@@ -XXX,XX +XXX,XX @@ typedef enum {
 
 static inline uint32_t syn_get_ec(uint32_t syn)
 {
-    return syn >> ARM_EL_EC_SHIFT;
+    return FIELD_EX32(syn, SYNDROME, EC);
 }
 
 static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec)
 {
-    return deposit32(syn, ARM_EL_EC_SHIFT, ARM_EL_EC_LENGTH, ec);
+    return FIELD_DP32(syn, SYNDROME, EC, ec);
 }
 
 /*
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec)
  */
 static inline uint32_t syn_uncategorized(void)
 {
-    return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_UNCATEGORIZED);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
+FIELD(ISS_IMM16, IMM16, 0, 16)
+
 static inline uint32_t syn_aa64_svc(uint32_t imm16)
 {
-    return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_SVC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa64_hvc(uint32_t imm16)
 {
-    return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_HVC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa64_smc(uint32_t imm16)
 {
-    return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_SMC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit)
 {
-    return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff)
-        | (is_16bit ? 0 : ARM_EL_IL);
+    uint32_t res = syn_set_ec(0, EC_AA32_SVC);
+    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_hvc(uint32_t imm16)
 {
-    return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA32_HVC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_smc(void)
 {
-    return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_AA32_SMC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_aa64_bkpt(uint32_t imm16)
 {
-    return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff);
+    uint32_t res = syn_set_ec(0, EC_AA64_BKPT);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit)
 {
-    return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff)
-        | (is_16bit ? 0 : ARM_EL_IL);
+    uint32_t res = syn_set_ec(0, EC_AA32_BKPT);
+    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
+    return res;
 }
 
 static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2,
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit)
 
 static inline uint32_t syn_sve_access_trap(void)
 {
-    return (EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_SVEACCESSTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 /*
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
 
 static inline uint32_t syn_illegalstate(void)
 {
-    return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_ILLEGALSTATE);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_pcalignment(void)
 {
-    return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_PCALIGNMENT);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn)
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gcs_gcsstr(int ra, int rn)
 
 static inline uint32_t syn_serror(uint32_t extra)
 {
-    return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra;
+    uint32_t res = syn_set_ec(0, EC_SERROR);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, SYNDROME, ISS, extra);
+    return res;
 }
 
 static inline uint32_t syn_mop(bool is_set, bool is_setg, int options,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Migrate syn_aa64_sysregtrap and co-processor register trap syndromes
to the registerfields API. The co-processor syndromes are split
between single and duel register moves.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-3-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 124 ++++++++++++++++++++++++++++++++++--------
 1 file changed, 102 insertions(+), 22 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ enum arm_exception_class {
 
 /* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */
 FIELD(SYNDROME, EC, 26, 6)
-FIELD(SYNDROME, IL, 25, 1)
+FIELD(SYNDROME, IL, 25, 1) /* IL=1 for 32 bit instructions */
 FIELD(SYNDROME, ISS, 0, 25)
 
 typedef enum {
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_smc(uint32_t imm16)
 static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit)
 {
     uint32_t res = syn_set_ec(0, EC_AA32_SVC);
-    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
     res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
     return res;
 }
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_bkpt(uint32_t imm16)
 static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit)
 {
     uint32_t res = syn_set_ec(0, EC_AA32_BKPT);
-    res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
     res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16);
     return res;
 }
 
+/*
+ * ISS encoding for an exception from MSR, MRS, or System instruction
+ * in AArch64 state.
+ */
+FIELD(SYSREG_ISS, ISREAD, 0, 1) /* Direction, 1 is read */
+FIELD(SYSREG_ISS, CRM, 1, 4)
+FIELD(SYSREG_ISS, RT, 5, 5)
+FIELD(SYSREG_ISS, CRN, 10, 4)
+FIELD(SYSREG_ISS, OP1, 14, 3)
+FIELD(SYSREG_ISS, OP2, 17, 3)
+FIELD(SYSREG_ISS, OP0, 20, 2)
+
 static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2,
                                            int crn, int crm, int rt,
                                            int isread)
 {
-    return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL
-        | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5)
-        | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_SYSTEMREGISTERTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, SYSREG_ISS, OP0, op0);
+    res = FIELD_DP32(res, SYSREG_ISS, OP2, op2);
+    res = FIELD_DP32(res, SYSREG_ISS, OP1, op1);
+    res = FIELD_DP32(res, SYSREG_ISS, CRN, crn);
+    res = FIELD_DP32(res, SYSREG_ISS, RT, rt);
+    res = FIELD_DP32(res, SYSREG_ISS, CRM, crm);
+    res = FIELD_DP32(res, SYSREG_ISS, ISREAD, isread);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from an MCR or MRC access
+ * (move to/from co-processor)
+ */
+FIELD(COPROC_ISS, ISREAD, 0, 1)
+FIELD(COPROC_ISS, CRM, 1, 4)
+FIELD(COPROC_ISS, RT, 5, 5)
+FIELD(COPROC_ISS, CRN, 10, 4)
+FIELD(COPROC_ISS, OP1, 14, 3)
+FIELD(COPROC_ISS, OP2, 17, 3)
+FIELD(COPROC_ISS, COND, 20, 4)
+FIELD(COPROC_ISS, CV, 24, 1)
+
 static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2,
                                         int crn, int crm, int rt, int isread,
                                         bool is_16bit)
 {
-    return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14)
-        | (crn << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP14RTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_ISS, OP2, opc2);
+    res = FIELD_DP32(res, COPROC_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_ISS, CRN, crn);
+    res = FIELD_DP32(res, COPROC_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread);
+
+    return res;
 }
 
 static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2,
                                         int crn, int crm, int rt, int isread,
                                         bool is_16bit)
 {
-    return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14)
-        | (crn << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP15RTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_ISS, OP2, opc2);
+    res = FIELD_DP32(res, COPROC_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_ISS, CRN, crn);
+    res = FIELD_DP32(res, COPROC_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from an MCRR or MRRC access
+ * (move to/from co-processor with 2 regs)
+ */
+FIELD(COPROC_R2_ISS, ISREAD, 0, 1)
+FIELD(COPROC_R2_ISS, CRM, 1, 4)
+FIELD(COPROC_R2_ISS, RT, 5, 5)
+FIELD(COPROC_R2_ISS, RT2, 10, 5)
+FIELD(COPROC_R2_ISS, OP1, 16, 4)
+FIELD(COPROC_R2_ISS, COND, 20, 4)
+FIELD(COPROC_R2_ISS, CV, 24, 1)
+
 static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm,
                                          int rt, int rt2, int isread,
                                          bool is_16bit)
 {
-    return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc1 << 16)
-        | (rt2 << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP14RRTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread);
+
+    return res;
 }
 
 static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm,
                                          int rt, int rt2, int isread,
                                          bool is_16bit)
 {
-    return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (opc1 << 16)
-        | (rt2 << 10) | (rt << 5) | (crm << 1) | isread;
+    uint32_t res = syn_set_ec(0, EC_CP15RRTTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2);
+    res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm);
+    res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread);
+
+    return res;
 }
 
 static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

The syn_simd_access trap was never used so remove it. We should only
see the COPROC encoding on v7 architectures.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-4-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm,
     return res;
 }
 
+/*
+ * ISS encoding for an exception from an access to a register of
+ * instruction resulting from the FPEN or TFP traps.
+ */
+FIELD(FP_ISS, COPROC, 0, 4) /* ARMv7 only */
+FIELD(FP_ISS, COND, 20, 4)
+FIELD(FP_ISS, CV, 24, 1)
+
 static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit,
                                           int coproc)
 {
     /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 */
-    return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | coproc;
-}
+    uint32_t res = syn_set_ec(0, EC_ADVSIMDFPACCESSTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
 
-static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit)
-{
-    /* AArch32 SIMD trap: TA == 1 coproc == 0 */
-    return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL)
-        | (cv << 24) | (cond << 20) | (1 << 5);
+    res = FIELD_DP32(res, FP_ISS, CV, cv);
+    res = FIELD_DP32(res, FP_ISS, COND, cond);
+    res = FIELD_DP32(res, FP_ISS, COPROC, coproc);
+
+    return res;
 }
 
 static inline uint32_t syn_sve_access_trap(void)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

For simplicity keep the OP as a two bit field rather than the two
interlinked fields in the docs (ERET/ERETA).

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-5-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_sve_access_trap(void)
 }
 
 /*
+ * ISS encoding for an exception from an ERET, ERETAA or ERETAB
+ * instructions.
+ *
  * eret_op is bits [1:0] of the ERET instruction, so:
  * 0 for ERET, 2 for ERETAA, 3 for ERETAB.
  */
+FIELD(ERET_ISS, OP, 0, 2)
+
 static inline uint32_t syn_erettrap(int eret_op)
 {
-    return (EC_ERETTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | eret_op;
+    uint32_t res = syn_set_ec(0, EC_ERETTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, ERET_ISS, OP, eret_op);
+
+    return res;
 }
 
 static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-6-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_erettrap(int eret_op)
     return res;
 }
 
+/*
+ * ISS encoding for an exception due to SME functionality
+ */
+FIELD(SME_ISS, SMTC, 0, 2)
+
 static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit)
 {
-    return (EC_SMETRAP << ARM_EL_EC_SHIFT)
-        | (is_16bit ? 0 : ARM_EL_IL) | etype;
+    uint32_t res = syn_set_ec(0, EC_SMETRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+    res = FIELD_DP32(res, SME_ISS, SMTC, etype);
+
+    return res;
 }
 
 static inline uint32_t syn_pacfail(bool data, int keynumber)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

syn_pactrap is fairly simple as the ISS is all RES0.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-7-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit)
     return res;
 }
 
+/*
+ * ISS encoding for a PAC Fail exceptions
+ */
+FIELD(PACFAIL_ISS, BnA, 0, 1) /* B key or A key */
+FIELD(PACFAIL_ISS, DnI, 1, 1) /* Data or Instruction */
+
 static inline uint32_t syn_pacfail(bool data, int keynumber)
 {
-    int error_code = (data << 1) | keynumber;
-    return (EC_PACFAIL << ARM_EL_EC_SHIFT) | ARM_EL_IL | error_code;
+    uint32_t res = syn_set_ec(0, EC_PACFAIL);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, PACFAIL_ISS, DnI, data);
+    res = FIELD_DP32(res, PACFAIL_ISS, BnA, keynumber);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a trapped Pointer
+ * Authentication instruction is RES0
+ */
 static inline uint32_t syn_pactrap(void)
 {
-    return (EC_PACTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+    uint32_t res = syn_set_ec(0, EC_PACTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    return res;
 }
 
 static inline uint32_t syn_btitrap(int btype)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-8-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pactrap(void)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from a Branch Target Identification
+ * instruction.
+ */
+FIELD(BTI_ISS, BTYPE, 0, 2)
+
 static inline uint32_t syn_btitrap(int btype)
 {
-    return (EC_BTITRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | btype;
+    uint32_t res = syn_set_ec(0, EC_BTITRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, BTI_ISS, BTYPE, btype);
+    return res;
 }
 
 static inline uint32_t syn_bxjtrap(int cv, int cond, int rm)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

This is an Armv7 specific syndrome for chips with Jazelle
functionality.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-9-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_btitrap(int btype)
     return res;
 }
 
+/*
+ * ISS encoding for trapped BXJ execution
+ *
+ * This is an Armv7 encoding.
+ */
+FIELD(BXJ_ISS, RM, 0, 4)
+/* bits 4:19 are Reserved, UNK/SBZP */
+FIELD(BXJ_ISS, COND, 20, 4)
+FIELD(BXJ_ISS, CV, 24, 1)
+
 static inline uint32_t syn_bxjtrap(int cv, int cond, int rm)
 {
-    return (EC_BXJTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-        (cv << 24) | (cond << 20) | rm;
+    uint32_t res = syn_set_ec(0, EC_BXJTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, BXJ_ISS, CV, cv);
+    res = FIELD_DP32(res, BXJ_ISS, COND, cond);
+    res = FIELD_DP32(res, BXJ_ISS, RM, rm);
+
+    return res;
 }
 
 static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr,
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-10-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_bxjtrap(int cv, int cond, int rm)
     return res;
 }
 
+/*
+ * ISS encoding for a Granule Protection Check exception
+ *
+ * These are only reported to EL3
+ */
+FIELD(GPC_ISS, xFSC, 0, 6)
+FIELD(GPC_ISS, WnR, 6, 1) /* Write not Read */
+FIELD(GPC_ISS, S1PTW, 7, 1)
+FIELD(GPC_ISS, CM, 8, 1)
+FIELD(GPC_ISS, VNCR, 13, 1)
+FIELD(GPC_ISS, GPCSC, 14, 6)
+FIELD(GPC_ISS, InD, 20, 1) /* Instruction not Data access */
+FIELD(GPC_ISS, S2PTW, 21, 1)
+
 static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr,
                                int cm, int s1ptw, int wnr, int fsc)
 {
-    return (EC_GPC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (s2ptw << 21)
-        | (ind << 20) | (gpcsc << 14) | (vncr << 13) | (cm << 8)
-        | (s1ptw << 7) | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_GPC);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GPC_ISS, S2PTW, s2ptw);
+    res = FIELD_DP32(res, GPC_ISS, InD, ind);
+    res = FIELD_DP32(res, GPC_ISS, GPCSC, gpcsc);
+    res = FIELD_DP32(res, GPC_ISS, VNCR, vncr);
+    res = FIELD_DP32(res, GPC_ISS, CM, cm);
+    res = FIELD_DP32(res, GPC_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, GPC_ISS, WnR, wnr);
+    res = FIELD_DP32(res, GPC_ISS, xFSC, fsc);
+
+    return res;
 }
 
 static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Migrate syn_insn_abort and syn_data_abort_* to the registerfields API.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260422125250.1303100-11-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 87 ++++++++++++++++++++++++++++++++++++-------
 1 file changed, 74 insertions(+), 13 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr,
     return res;
 }
 
+/*
+ * ISS encoding for an exception from an Instruction Abort
+ *
+ * (aka instruction abort)
+ */
+FIELD(IABORT_ISS, IFSC, 0, 6)
+FIELD(IABORT_ISS, S1PTW, 7, 1)
+FIELD(IABORT_ISS, EA, 9, 1)
+FIELD(IABORT_ISS, FnV, 10, 1) /* FAR not Valid */
+FIELD(IABORT_ISS, SET, 11, 2)
+FIELD(IABORT_ISS, PFV, 14, 1)
+FIELD(IABORT_ISS, TopLevel, 21, 1) /* FEAT_THE */
+
 static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc)
 {
-    return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc;
+    uint32_t res = syn_set_ec(0, EC_INSNABORT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, IABORT_ISS, EA, ea);
+    res = FIELD_DP32(res, IABORT_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, IABORT_ISS, IFSC, fsc);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a Data Abort
+ */
+FIELD(DABORT_ISS, DFSC, 0, 6)
+FIELD(DABORT_ISS, WNR, 6, 1)
+FIELD(DABORT_ISS, S1PTW, 7, 1)
+FIELD(DABORT_ISS, CM, 8, 1)
+FIELD(DABORT_ISS, EA, 9, 1)
+FIELD(DABORT_ISS, FnV, 10, 1)
+FIELD(DABORT_ISS, LST, 11, 2)
+FIELD(DABORT_ISS, VNCR, 13, 1)
+FIELD(DABORT_ISS, AR, 14, 1)
+FIELD(DABORT_ISS, SF, 15, 1)
+FIELD(DABORT_ISS, SRT, 16, 5)
+FIELD(DABORT_ISS, SSE, 21, 1)
+FIELD(DABORT_ISS, SAS, 22, 2)
+FIELD(DABORT_ISS, ISV, 24, 1)
+
 static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv,
                                              int ea, int cm, int s1ptw,
                                              int wnr, int fsc)
 {
-    return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-           | ARM_EL_IL
-           | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7)
-           | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, DABORT_ISS, FnV, fnv);
+    res = FIELD_DP32(res, DABORT_ISS, EA, ea);
+    res = FIELD_DP32(res, DABORT_ISS, CM, cm);
+    res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, DABORT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc);
+
+    return res;
 }
 
 static inline uint32_t syn_data_abort_with_iss(int same_el,
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el,
                                                int wnr, int fsc,
                                                bool is_16bit)
 {
-    return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-           | (is_16bit ? 0 : ARM_EL_IL)
-           | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16)
-           | (sf << 15) | (ar << 14)
-           | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, DABORT_ISS, ISV, 1);
+    res = FIELD_DP32(res, DABORT_ISS, SAS, sas);
+    res = FIELD_DP32(res, DABORT_ISS, SSE, sse);
+    res = FIELD_DP32(res, DABORT_ISS, SRT, srt);
+    res = FIELD_DP32(res, DABORT_ISS, SF, sf);
+    res = FIELD_DP32(res, DABORT_ISS, AR, ar);
+    res = FIELD_DP32(res, DABORT_ISS, EA, ea);
+    res = FIELD_DP32(res, DABORT_ISS, CM, cm);
+    res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw);
+    res = FIELD_DP32(res, DABORT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc);
+
+    return res;
 }
 
 /*
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el,
  */
 static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc)
 {
-    return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (1 << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | ARM_EL_VNCR | (wnr << 6) | fsc;
+    uint32_t res = syn_set_ec(0, EC_DATAABORT_SAME_EL);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, DABORT_ISS, VNCR, 1);
+    res = FIELD_DP32(res, DABORT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc);
+
+    return res;
 }
 
 static inline uint32_t syn_swstep(int same_el, int isv, int ex)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Migrate syn_swstep, syn_watchpoint and syn_breakpoint to the
registerfields API.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-12-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 54 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 48 insertions(+), 6 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from a Software Step exception.
+ */
+FIELD(SOFTSTEP_ISS, IFSC, 0, 6)
+FIELD(SOFTSTEP_ISS, EX, 6, 1)
+FIELD(SOFTSTEP_ISS, ISV, 24, 1)
+
 static inline uint32_t syn_swstep(int same_el, int isv, int ex)
 {
-    return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22;
+    uint32_t res = syn_set_ec(0, EC_SOFTWARESTEP + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, SOFTSTEP_ISS, ISV, isv);
+    res = FIELD_DP32(res, SOFTSTEP_ISS, EX, ex);
+    res = FIELD_DP32(res, SOFTSTEP_ISS, IFSC, 0x22);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a Watchpoint exception
+ */
+FIELD(WATCHPOINT_ISS, DFSC, 0, 6)
+FIELD(WATCHPOINT_ISS, WNR, 6, 1)
+FIELD(WATCHPOINT_ISS, CM, 8, 1)
+FIELD(WATCHPOINT_ISS, FnV, 10, 1)
+FIELD(WATCHPOINT_ISS, VNCR, 13, 1) /* FEAT_NV2 */
+FIELD(WATCHPOINT_ISS, FnP, 15, 1)
+FIELD(WATCHPOINT_ISS, WPF, 16, 1)
+/* bellow mandatory from FEAT_Debugv8p9 */
+FIELD(WATCHPOINT_ISS, WPTV, 17, 1) /* FEAT_Debugv8p2 - WPT valid */
+FIELD(WATCHPOINT_ISS, WPT, 18, 6) /* FEAT_Debugv8p2 - missing WP number */
+
 static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr)
 {
-    return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22;
+    uint32_t res = syn_set_ec(0, EC_WATCHPOINT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, WATCHPOINT_ISS, CM, cm);
+    res = FIELD_DP32(res, WATCHPOINT_ISS, WNR, wnr);
+    res = FIELD_DP32(res, WATCHPOINT_ISS, DFSC, 0x22);
+
+    return res;
 }
 
+/*
+ * ISS encoding for an exception from a Breakpoint or a Vector Catch
+ * debug exception.
+ */
+FIELD(BREAKPOINT_ISS, IFSC, 0, 6)
+
 static inline uint32_t syn_breakpoint(int same_el)
 {
-    return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
-        | ARM_EL_IL | 0x22;
+    uint32_t res = syn_set_ec(0, EC_BREAKPOINT + same_el);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+    res = FIELD_DP32(res, BREAKPOINT_ISS, IFSC, 0x22);
+
+    return res;
 }
 
 static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

This will help later when we expand the fields we report.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-13-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_breakpoint(int same_el)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from a WF* instruction
+ */
+FIELD(WFX_ISS, TI, 0, 2)
+FIELD(WFX_ISS, RV, 2, 1)
+FIELD(WFX_ISS, RN, 5, 5)
+FIELD(WFX_ISS, COND, 20, 4)
+FIELD(WFX_ISS, CV, 24, 1)
+
 static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
 {
-    return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) |
-           (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) |
-           (cv << 24) | (cond << 20) | ti;
+    uint32_t res = syn_set_ec(0, EC_WFX_TRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
+
+    res = FIELD_DP32(res, WFX_ISS, CV, cv);
+    res = FIELD_DP32(res, WFX_ISS, COND, cond);
+    res = FIELD_DP32(res, WFX_ISS, TI, ti);
+
+    return res;
 }
 
 static inline uint32_t syn_illegalstate(void)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Tweak arg names to make it clear raddr is the data address register
number.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-14-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 39 +++++++++++++++++++++++++++++++++------
 1 file changed, 33 insertions(+), 6 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void)
     return res;
 }
 
+/*
+ * ISS encoding for a GCS exception
+ *
+ * Field validity depends on EXTYPE
+ */
+FIELD(GCS_ISS, IT, 0, 5)
+FIELD(GCS_ISS, RN, 5, 5) /* only for non EXLOCK exceptions */
+FIELD(GCS_ISS, RADDR, 10, 5) /* only for GCSSTR/GCSSTTR traps */
+FIELD(GCS_ISS, EXTYPE, 20, 4)
+
 static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn)
 {
-    return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-            (GCS_ET_DataCheck << 20) | (rn << 5) | it);
+    uint32_t res = syn_set_ec(0, EC_GCS);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_DataCheck);
+    res = FIELD_DP32(res, GCS_ISS, RN, rn);
+    res = FIELD_DP32(res, GCS_ISS, IT, it);
+
+    return res;
 }
 
 static inline uint32_t syn_gcs_exlock(void)
 {
-    return (EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | (GCS_ET_EXLOCK << 20);
+    uint32_t res = syn_set_ec(0, EC_GCS);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_EXLOCK);
+
+    return res;
 }
 
-static inline uint32_t syn_gcs_gcsstr(int ra, int rn)
+static inline uint32_t syn_gcs_gcsstr(int raddr, int rn)
 {
-    return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-            (GCS_ET_GCSSTR_GCSSTTR << 20) | (ra << 10) | (rn << 5));
+    uint32_t res = syn_set_ec(0, EC_GCS);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_GCSSTR_GCSSTTR);
+    res = FIELD_DP32(res, GCS_ISS, RADDR, raddr);
+    res = FIELD_DP32(res, GCS_ISS, RN, rn);
+
+    return res;
 }
 
 static inline uint32_t syn_serror(uint32_t extra)
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-15-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 33 +++++++++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 4 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_serror(uint32_t extra)
     return res;
 }
 
+/*
+ * ISS encoding for an exception from the Memory Copy and Memory Set
+ * instructions.
+ */
+FIELD(MOP_ISS, SIZEREG, 0, 5)
+FIELD(MOP_ISS, SRCREG, 5, 5)
+FIELD(MOP_ISS, DESTREG, 10, 5)
+FIELD(MOP_ISS, FORMATOPT, 16, 2)
+FIELD(MOP_ISS, OPT_A, 16, 1)
+FIELD(MOP_ISS, WRONG_OPT, 17, 1)
+FIELD(MOP_ISS, EPILOGUE, 18, 1)
+FIELD(MOP_ISS, OPTIONS, 19, 4)
+FIELD(MOP_ISS, IS_SETG, 23, 1)
+FIELD(MOP_ISS, MEMINST, 24, 1)
+
 static inline uint32_t syn_mop(bool is_set, bool is_setg, int options,
                                bool epilogue, bool wrong_option, bool option_a,
                                int destreg, int srcreg, int sizereg)
 {
-    return (EC_MOP << ARM_EL_EC_SHIFT) | ARM_EL_IL |
-        (is_set << 24) | (is_setg << 23) | (options << 19) |
-        (epilogue << 18) | (wrong_option << 17) | (option_a << 16) |
-        (destreg << 10) | (srcreg << 5) | sizereg;
+    uint32_t res = syn_set_ec(0, EC_MOP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, MOP_ISS, MEMINST, is_set);
+    res = FIELD_DP32(res, MOP_ISS, IS_SETG, is_setg);
+    res = FIELD_DP32(res, MOP_ISS, OPTIONS, options);
+    res = FIELD_DP32(res, MOP_ISS, EPILOGUE, epilogue);
+    res = FIELD_DP32(res, MOP_ISS, WRONG_OPT, wrong_option);
+    res = FIELD_DP32(res, MOP_ISS, OPT_A, option_a);
+    res = FIELD_DP32(res, MOP_ISS, DESTREG, destreg);
+    res = FIELD_DP32(res, MOP_ISS, SRCREG, srcreg);
+    res = FIELD_DP32(res, MOP_ISS, SIZEREG, sizereg);
+
+    return res;
 }
 
 
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

It shares the same COPROC_ISS encoding as the other CP traps although
not all the fields are used.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-16-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h       | 16 ++++++++++++++++
 target/arm/tcg/vfp_helper.c |  5 +----
 2 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ FIELD(COPROC_ISS, OP2, 17, 3)
 FIELD(COPROC_ISS, COND, 20, 4)
 FIELD(COPROC_ISS, CV, 24, 1)
 
+static inline uint32_t syn_cp10_rt_trap(int cv, int cond, int opc1,
+                                        int crn, int rt, int isread)
+{
+    uint32_t res = syn_set_ec(0, EC_FPIDTRAP);
+    res = FIELD_DP32(res, SYNDROME, IL, 1);
+
+    res = FIELD_DP32(res, COPROC_ISS, CV, cv);
+    res = FIELD_DP32(res, COPROC_ISS, COND, cond);
+    res = FIELD_DP32(res, COPROC_ISS, OP1, opc1);
+    res = FIELD_DP32(res, COPROC_ISS, CRN, crn);
+    res = FIELD_DP32(res, COPROC_ISS, RT, rt);
+    res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread);
+
+    return res;
+}
+
 static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2,
                                         int crn, int crm, int rt, int isread,
                                         bool is_16bit)
diff --git a/target/arm/tcg/vfp_helper.c b/target/arm/tcg/vfp_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/vfp_helper.c
+++ b/target/arm/tcg/vfp_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(check_hcr_el2_trap)(CPUARMState *env, uint32_t rt, uint32_t reg)
         g_assert_not_reached();
     }
 
-    syndrome = ((EC_FPIDTRAP << ARM_EL_EC_SHIFT)
-                | ARM_EL_IL
-                | (1 << 24) | (0xe << 20) | (7 << 14)
-                | (reg << 10) | (rt << 5) | 1);
+    syndrome = syn_cp10_rt_trap(1, 0xe, 7, reg, rt, 1);
 
     raise_exception(env, EXCP_HYP_TRAP, syndrome, 2);
 }
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

One more step towards dropping the old #defines.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-17-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs)
              */
             if (cs->exception_index == EXCP_PREFETCH_ABORT ||
                 (cs->exception_index == EXCP_DATA_ABORT &&
-                 !(env->exception.syndrome & ARM_EL_ISV)) ||
+                 !FIELD_EX32(env->exception.syndrome, SYNDROME, IL)) ||
                 syn_get_ec(env->exception.syndrome) == EC_UNCATEGORIZED) {
-                env->exception.syndrome &= ~ARM_EL_IL;
+                env->exception.syndrome = FIELD_DP32(env->exception.syndrome, SYNDROME, IL, 0);
             }
         }
         env->cp15.esr_el[2] = env->exception.syndrome;
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

This removes the last use of ARM_EL_EC_SHIFT.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-18-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h  | 1 -
 target/arm/tcg/debug.c | 2 +-
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ typedef enum {
 } GCSInstructionType;
 
 #define ARM_EL_EC_LENGTH 6
-#define ARM_EL_EC_SHIFT 26
 #define ARM_EL_IL_SHIFT 25
 #define ARM_EL_ISV_SHIFT 24
 #define ARM_EL_IL (1 << ARM_EL_IL_SHIFT)
diff --git a/target/arm/tcg/debug.c b/target/arm/tcg/debug.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/debug.c
+++ b/target/arm/tcg/debug.c
@@ -XXX,XX +XXX,XX @@ raise_exception_debug(CPUARMState *env, uint32_t excp, uint32_t syndrome)
      * Similarly for watchpoint and breakpoint matches.
      */
     assert(debug_el >= cur_el);
-    syndrome |= (debug_el == cur_el) << ARM_EL_EC_SHIFT;
+    syndrome |= (debug_el == cur_el) << R_SYNDROME_EC_SHIFT;
     raise_exception(env, excp, syndrome, debug_el);
 }
 
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Rather than open coding a bunch of shifts and masks we can use the
syndrome definitions. While we are at it assert it really is a
EC_DATAABORT.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-19-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/whpx/whpx-all.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/target/arm/whpx/whpx-all.c b/target/arm/whpx/whpx-all.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/whpx/whpx-all.c
+++ b/target/arm/whpx/whpx-all.c
@@ -XXX,XX +XXX,XX @@ static int whpx_handle_mmio(CPUState *cpu, WHV_MEMORY_ACCESS_CONTEXT *ctx)
 {
     uint64_t syndrome = ctx->Syndrome;
 
-    bool isv = syndrome & ARM_EL_ISV;
-    bool iswrite = (syndrome >> 6) & 1;
-    bool sse = (syndrome >> 21) & 1;
-    uint32_t sas = (syndrome >> 22) & 3;
+    bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV);
+    bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR);
+    bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE);
+    uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS);
     uint32_t len = 1 << sas;
-    uint32_t srt = (syndrome >> 16) & 0x1f;
-    uint32_t cm = (syndrome >> 8) & 0x1;
+    uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT);
+    uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM);
     uint64_t val = 0;
 
+    assert(syn_get_ec(syndrome) == EC_DATAABORT);
     assert(!cm);
     assert(isv);
 
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Rather than open coding a bunch of shifts and masks we can use the
syndrome definitions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260422125250.1303100-20-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/hvf/hvf.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/hvf/hvf.c
+++ b/target/arm/hvf/hvf.c
@@ -XXX,XX +XXX,XX @@ static int hvf_handle_exception(CPUState *cpu, hv_vcpu_exit_exception_t *excp)
         break;
     }
     case EC_DATAABORT: {
-        bool isv = syndrome & ARM_EL_ISV;
-        bool iswrite = (syndrome >> 6) & 1;
-        bool s1ptw = (syndrome >> 7) & 1;
-        bool sse = (syndrome >> 21) & 1;
-        uint32_t sas = (syndrome >> 22) & 3;
+        bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV);
+        bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR);
+        bool s1ptw = FIELD_EX32(syndrome, DABORT_ISS, S1PTW);
+        bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE);
+        uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS);
         uint32_t len = 1 << sas;
-        uint32_t srt = (syndrome >> 16) & 0x1f;
-        uint32_t cm = (syndrome >> 8) & 0x1;
+        uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT);
+        uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM);
         uint64_t val = 0;
         uint64_t ipa = excp->physical_address;
         AddressSpace *as = cpu_get_address_space(cpu, ARMASIdx_NS);
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

One more step to removing the old defines.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-21-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/tlb_helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

From: Alex Bennée <alex.bennee@linaro.org>

These are only valid for data abort syndromes.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-22-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/tcg/tlb_helper.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/tlb_helper.c
+++ b/target/arm/tcg/tlb_helper.c
@@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn,
      * ST64BV, or ST64BV0 insns report syndrome info even for stage-1
      * faults and regardless of the target EL.
      */
-    if (template_syn & ARM_EL_VNCR) {
+    if (FIELD_EX32(template_syn, DABORT_ISS, VNCR)) {
         /*
          * FEAT_NV2 faults on accesses via VNCR_EL2 are a special case:
          * they are always reported as "same EL", even though we are going
@@ -XXX,XX +XXX,XX @@ void arm_deliver_fault(ARMCPU *cpu, vaddr addr,
      * because we masked that out in disas_set_insn_syndrome())
      */
     bool is_vncr = (access_type != MMU_INST_FETCH) &&
-        (env->exception.syndrome & ARM_EL_VNCR);
+        FIELD_EX32(env->exception.syndrome, DABORT_ISS, VNCR);
 
     if (is_vncr) {
         /* FEAT_NV2 faults on accesses via VNCR_EL2 go to EL2 */
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Now everything is defined with registerfields we can drop the old
defines.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-23-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ typedef enum {
     GCS_IT_GCSPOPX = 9,
 } GCSInstructionType;
 
-#define ARM_EL_EC_LENGTH 6
-#define ARM_EL_IL_SHIFT 25
-#define ARM_EL_ISV_SHIFT 24
-#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT)
-#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT)
-
-/* In the Data Abort syndrome */
-#define ARM_EL_VNCR (1 << 13)
-
 static inline uint32_t syn_get_ec(uint32_t syn)
 {
     return FIELD_EX32(syn, SYNDROME, EC);
-- 
2.43.0

From: Alex Bennée <alex.bennee@linaro.org>

Pass the register number (rd) to the wfit helper and report it in the
syndrome ISS.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20260422125250.1303100-24-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/syndrome.h          | 11 ++++++++++-
 target/arm/tcg/helper-defs.h   |  2 +-
 target/arm/tcg/op_helper.c     |  7 ++++---
 target/arm/tcg/translate-a64.c |  2 +-
 4 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -XXX,XX +XXX,XX @@ FIELD(WFX_ISS, RN, 5, 5)
 FIELD(WFX_ISS, COND, 20, 4)
 FIELD(WFX_ISS, CV, 24, 1)
 
-static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
+typedef enum {
+    WFI = 0b00,
+    WFE = 0b01,
+    WFIT = 0b10,
+    WFET = 0xb11
+} wfx_ti;
+
+static inline uint32_t syn_wfx(int cv, int cond, int rn, bool rv, wfx_ti ti, bool is_16bit)
 {
     uint32_t res = syn_set_ec(0, EC_WFX_TRAP);
     res = FIELD_DP32(res, SYNDROME, IL, !is_16bit);
@@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
     res = FIELD_DP32(res, WFX_ISS, CV, cv);
     res = FIELD_DP32(res, WFX_ISS, COND, cond);
     res = FIELD_DP32(res, WFX_ISS, TI, ti);
+    res = FIELD_DP32(res, WFX_ISS, RN, rn);
+    res = FIELD_DP32(res, WFX_ISS, RV, rv);
 
     return res;
 }
diff --git a/target/arm/tcg/helper-defs.h b/target/arm/tcg/helper-defs.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/helper-defs.h
+++ b/target/arm/tcg/helper-defs.h
@@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(exception_pc_alignment, noreturn, env, vaddr)
 DEF_HELPER_1(setend, void, env)
 DEF_HELPER_2(wfi, void, env, i32)
 DEF_HELPER_1(wfe, void, env)
-DEF_HELPER_2(wfit, void, env, i64)
+DEF_HELPER_2(wfit, void, env, i32)
 DEF_HELPER_1(yield, void, env)
 DEF_HELPER_1(pre_hvc, void, env)
 DEF_HELPER_2(pre_smc, void, env, i32)
diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/op_helper.c
+++ b/target/arm/tcg/op_helper.c
@@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len)
             env->regs[15] -= insn_len;
         }
 
-        raise_exception(env, excp, syn_wfx(1, 0xe, 0, insn_len == 2),
+        raise_exception(env, excp, syn_wfx(1, 0xe, 0, false, WFI, insn_len == 2),
                         target_el);
     }
 
@@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len)
 #endif
 }
 
-void HELPER(wfit)(CPUARMState *env, uint64_t timeout)
+void HELPER(wfit)(CPUARMState *env, uint32_t rd)
 {
 #ifdef CONFIG_USER_ONLY
     /*
@@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout)
     int target_el = check_wfx_trap(env, false, &excp);
     /* The WFIT should time out when CNTVCT_EL0 >= the specified value. */
     uint64_t cntval = gt_get_countervalue(env);
+    uint64_t timeout = env->xregs[rd];
     /*
      * We want the value that we would get if we read CNTVCT_EL0 from
      * the current exception level, so the direct_access offset, not
@@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout)
 
     if (target_el) {
         env->pc -= 4;
-        raise_exception(env, excp, syn_wfx(1, 0xe, 2, false), target_el);
+        raise_exception(env, excp, syn_wfx(1, 0xe, rd, true, WFIT, false), target_el);
     }
 
     if (uadd64_overflow(timeout, offset, &nexttick)) {
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -XXX,XX +XXX,XX @@ static bool trans_WFIT(DisasContext *s, arg_WFIT *a)
     }
 
     gen_a64_update_pc(s, 4);
-    gen_helper_wfit(tcg_env, cpu_reg(s, a->rd));
+    gen_helper_wfit(tcg_env, tcg_constant_i32(a->rd));
     /* Go back to the main loop to check for interrupts */
     s->base.is_jmp = DISAS_EXIT;
     return true;
-- 
2.43.0