Ten arm-related bug fixes for 2.12... thanks -- PMM The following changes since commit 4c2c1015905fa1d616750dfe024b4c0b35875950: Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20180323' into staging (2018-03-23 10:20:54 +0000) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180323 for you to fetch changes up to 548f514cf89dd9ab39c0cb4c063097bccf141fdd: target/arm: Always set FAR to a known unknown value for debug exceptions (2018-03-23 18:26:46 +0000) ---------------------------------------------------------------- target-arm queue: * arm/translate-a64: don't lose interrupts after unmasking via write to DAIF * sdhci: fix incorrect use of Error * * hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses * hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15 * i.MX: Support serial RS-232 break properly * mach-virt: Set VM's SMBIOS system version to mc->name * target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRK * target/arm: Factor out code to calculate FSR for debug exceptions * target/arm: Set FSR for BKPT, BRK when raising exception * target/arm: Always set FAR to a known unknown value for debug exceptions ---------------------------------------------------------------- Paolo Bonzini (1): sdhci: fix incorrect use of Error * Peter Maydell (6): hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15 target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRK target/arm: Factor out code to calculate FSR for debug exceptions target/arm: Set FSR for BKPT, BRK when raising exception target/arm: Always set FAR to a known unknown value for debug exceptions Trent Piepho (1): i.MX: Support serial RS-232 break properly Victor Kamensky (1): arm/translate-a64: treat DISAS_UPDATE as variant of DISAS_EXIT Wei Huang (1): mach-virt: Set VM's SMBIOS system version to mc->name include/hw/arm/virt.h | 1 + include/hw/char/imx_serial.h | 1 + target/arm/helper.h | 1 + target/arm/internals.h | 25 +++++++++++++++++++++++++ hw/arm/bcm2836.c | 2 +- hw/arm/raspi.c | 2 +- hw/arm/virt.c | 8 +++++++- hw/char/imx_serial.c | 5 ++++- hw/intc/arm_gicv3_cpuif.c | 6 +++--- hw/sd/sdhci.c | 4 ++-- target/arm/helper.c | 1 - target/arm/op_helper.c | 33 ++++++++++++++++++++++----------- target/arm/translate-a64.c | 21 ++++++++++++++++----- target/arm/translate.c | 19 ++++++++++++++----- 14 files changed, 98 insertions(+), 31 deletions(-) From: Victor Kamensky <kamensky@cisco.com> In OE project 4.15 linux kernel boot hang was observed under single cpu aarch64 qemu. Kernel code was in a loop waiting for vtimer arrival, spinning in TC generated blocks, while interrupt was pending unprocessed. This happened because when qemu tried to handle vtimer interrupt target had interrupts disabled, as result flag indicating TCG exit, cpu->icount_decr.u16.high, was cleared but arm_cpu_exec_interrupt function did not call arm_cpu_do_interrupt to process interrupt. Later when target reenabled interrupts, it happened without exit into main loop, so following code that waited for result of interrupt execution run in infinite loop. To solve the problem instructions that operate on CPU sys state (i.e enable/disable interrupt), and marked as DISAS_UPDATE, should be considered as DISAS_EXIT variant, and should be forced to exit back to main loop so qemu will have a chance processing pending CPU state updates, including pending interrupts. This change brings consistency with how DISAS_UPDATE is treated in aarch32 case. CC: Peter Maydell <peter.maydell@linaro.org> CC: Alex Bennée <alex.bennee@linaro.org> CC: qemu-stable@nongnu.org Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1521526368-1996-1-git-send-email-kamensky@cisco.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_tb_stop(DisasContextBase *dcbase, CPUState *cpu) case DISAS_UPDATE: gen_a64_set_pc_im(dc->pc); /* fall through */ - case DISAS_JUMP: - tcg_gen_lookup_and_goto_ptr(); - break; case DISAS_EXIT: tcg_gen_exit_tb(0); break; + case DISAS_JUMP: + tcg_gen_lookup_and_goto_ptr(); + break; case DISAS_NORETURN: case DISAS_SWI: break; -- 2.16.2 From: Paolo Bonzini <pbonzini@redhat.com> Detected by Coverity (CID 1386072, 1386073, 1386076, 1386077). local_err was unused, and this made the static analyzer unhappy. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20180320151355.25854-1-pbonzini@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sdhci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -XXX,XX +XXX,XX @@ static void sdhci_pci_realize(PCIDevice *dev, Error **errp) Error *local_err = NULL; sdhci_initfn(s); - sdhci_common_realize(s, errp); + sdhci_common_realize(s, &local_err); if (local_err) { error_propagate(errp, local_err); return; @@ -XXX,XX +XXX,XX @@ static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp) SysBusDevice *sbd = SYS_BUS_DEVICE(dev); Error *local_err = NULL; - sdhci_common_realize(s, errp); + sdhci_common_realize(s, &local_err); if (local_err) { error_propagate(errp, local_err); return; -- 2.16.2 If the GIC has the security extension support enabled, then a non-secure access to ICC_PMR must take account of the non-secure view of interrupt priorities, where real priorities 0x00..0x7f are secure-only and not visible to the non-secure guest, and priorities 0x80..0xff are shown to the guest as if they were 0x00..0xff. We had the logic here wrong: * on reads, the priority is in the secure range if bit 7 is clear, not if it is set * on writes, we want to set bit 7, not mask everything else Our ICC_RPR read code had the same error as ICC_PMR. (Compare the GICv3 spec pseudocode functions ICC_RPR_EL1 and ICC_PMR_EL1.) Fixes: https://bugs.launchpad.net/qemu/+bug/1748434 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20180315133441.24149-1-peter.maydell@linaro.org --- hw/intc/arm_gicv3_cpuif.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static uint64_t icc_pmr_read(CPUARMState *env, const ARMCPRegInfo *ri) /* NS access and Group 0 is inaccessible to NS: return the * NS view of the current priority */ - if (value & 0x80) { + if ((value & 0x80) == 0) { /* Secure priorities not visible to NS */ value = 0; } else if (value != 0xff) { @@ -XXX,XX +XXX,XX @@ static void icc_pmr_write(CPUARMState *env, const ARMCPRegInfo *ri, /* Current PMR in the secure range, don't allow NS to change it */ return; } - value = (value >> 1) & 0x80; + value = (value >> 1) | 0x80; } cs->icc_pmr_el1 = value; gicv3_cpuif_update(cs); @@ -XXX,XX +XXX,XX @@ static uint64_t icc_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri) if (arm_feature(env, ARM_FEATURE_EL3) && !arm_is_secure(env) && (env->cp15.scr_el3 & SCR_FIQ)) { /* NS GIC access and Group 0 is inaccessible to NS */ - if (prio & 0x80) { + if ((prio & 0x80) == 0) { /* NS mustn't see priorities in the Secure half of the range */ prio = 0; } else if (prio != 0xff) { -- 2.16.2 The BCM2836 uses a Cortex-A7, not a Cortex-A15. Update the device to use the correct CPU. https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2836/QA7_rev3.4.pdf When the BCM2836 was introduced (bad5623690b) the Cortex-A7 was not available, so the very similar Cortex-A15 was used. Since dcf578ed8ce we can model the correct core. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180319110215.16755-1-peter.maydell@linaro.org --- hw/arm/bcm2836.c | 2 +- hw/arm/raspi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ struct BCM283XInfo { static const BCM283XInfo bcm283x_socs[] = { { .name = TYPE_BCM2836, - .cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"), + .cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"), .clusterid = 0xf, }, #ifdef TARGET_AARCH64 diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi2_machine_init(MachineClass *mc) mc->no_parallel = 1; mc->no_floppy = 1; mc->no_cdrom = 1; - mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"); + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"); mc->max_cpus = BCM283X_NCPUS; mc->min_cpus = BCM283X_NCPUS; mc->default_cpus = BCM283X_NCPUS; -- 2.16.2 From: Trent Piepho <tpiepho@impinj.com> Linux does not detect a break from this IMX serial driver as a magic sysrq. Nor does it note a break in the port error counts. The former is because the Linux driver uses the BRCD bit in the USR2 register to trigger the RS-232 break handler in the kernel, which is where sysrq hooks in. The emulated UART was not setting this status bit. The latter is because the Linux driver expects, in addition to the BRK bit, that the ERR bit is set when a break is read in the FIFO. A break should also count as a frame error, so add that bit too. Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Message-id: 20180320013657.25038-1-tpiepho@impinj.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/imx_serial.h | 1 + hw/char/imx_serial.c | 5 ++++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/include/hw/char/imx_serial.h b/include/hw/char/imx_serial.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/imx_serial.h +++ b/include/hw/char/imx_serial.h @@ -XXX,XX +XXX,XX @@ #define URXD_CHARRDY (1<<15) /* character read is valid */ #define URXD_ERR (1<<14) /* Character has error */ +#define URXD_FRMERR (1<<12) /* Character has frame error */ #define URXD_BRK (1<<11) /* Break received */ #define USR1_PARTYER (1<<15) /* Parity Error */ diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/imx_serial.c +++ b/hw/char/imx_serial.c @@ -XXX,XX +XXX,XX @@ static void imx_put_data(void *opaque, uint32_t value) s->usr2 |= USR2_RDR; s->uts1 &= ~UTS1_RXEMPTY; s->readbuff = value; + if (value & URXD_BRK) { + s->usr2 |= USR2_BRCD; + } imx_update(s); } @@ -XXX,XX +XXX,XX @@ static void imx_receive(void *opaque, const uint8_t *buf, int size) static void imx_event(void *opaque, int event) { if (event == CHR_EVENT_BREAK) { - imx_put_data(opaque, URXD_BRK); + imx_put_data(opaque, URXD_BRK | URXD_FRMERR | URXD_ERR); } } -- 2.16.2 From: Wei Huang <wei@redhat.com> Instead of using "1.0" as the system version of SMBIOS, we should use mc->name for mach-virt machine type to be consistent other architectures. With this patch, "dmidecode -t 1" (e.g., "-M virt-2.12,accel=kvm") will show: Handle 0x0100, DMI type 1, 27 bytes System Information Manufacturer: QEMU Product Name: KVM Virtual Machine Version: virt-2.12 Serial Number: Not Specified ... instead of: Handle 0x0100, DMI type 1, 27 bytes System Information Manufacturer: QEMU Product Name: KVM Virtual Machine Version: 1.0 Serial Number: Not Specified ... For backward compatibility, we allow older machine types to keep "1.0" as the default system version. Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20180322212318.7182-1-wei@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 1 + hw/arm/virt.c | 8 +++++++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef struct { bool no_its; bool no_pmu; bool claim_edge_triggered_timers; + bool smbios_old_sys_ver; } VirtMachineClass; typedef struct { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void *machvirt_dtb(const struct arm_boot_info *binfo, int *fdt_size) static void virt_build_smbios(VirtMachineState *vms) { + MachineClass *mc = MACHINE_GET_CLASS(vms); + VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms); uint8_t *smbios_tables, *smbios_anchor; size_t smbios_tables_len, smbios_anchor_len; const char *product = "QEMU Virtual Machine"; @@ -XXX,XX +XXX,XX @@ static void virt_build_smbios(VirtMachineState *vms) } smbios_set_defaults("QEMU", product, - "1.0", false, true, SMBIOS_ENTRY_POINT_30); + vmc->smbios_old_sys_ver ? "1.0" : mc->name, false, + true, SMBIOS_ENTRY_POINT_30); smbios_get_tables(NULL, 0, &smbios_tables, &smbios_tables_len, &smbios_anchor, &smbios_anchor_len); @@ -XXX,XX +XXX,XX @@ static void virt_2_11_instance_init(Object *obj) static void virt_machine_2_11_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_2_12_options(mc); SET_MACHINE_COMPAT(mc, VIRT_COMPAT_2_11); + vmc->smbios_old_sys_ver = true; } DEFINE_VIRT_MACHINE(2, 11) -- 2.16.2 The MDCR_EL2.TDE bit allows the exception level targeted by debug exceptions to be set to EL2 for code executing at EL0. We handle this in the arm_debug_target_el() function, but this is only used for hardware breakpoint and watchpoint exceptions, not for the exception generated when the guest executes an AArch32 BKPT or AArch64 BRK instruction. We don't have enough information for a translate-time equivalent of arm_debug_target_el(), so instead make BKPT and BRK call a special purpose helper which can do the routing, rather than the generic exception_with_syndrome helper. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180320134114.30418-2-peter.maydell@linaro.org --- target/arm/helper.h | 1 + target/arm/op_helper.c | 8 ++++++++ target/arm/translate-a64.c | 15 +++++++++++++-- target/arm/translate.c | 19 ++++++++++++++----- 4 files changed, 36 insertions(+), 7 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(sel_flags, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_2(exception_internal, void, env, i32) DEF_HELPER_4(exception_with_syndrome, void, env, i32, i32, i32) +DEF_HELPER_2(exception_bkpt_insn, void, env, i32) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) DEF_HELPER_1(wfe, void, env) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_with_syndrome)(CPUARMState *env, uint32_t excp, raise_exception(env, excp, syndrome, target_el); } +/* Raise an EXCP_BKPT with the specified syndrome register value, + * targeting the correct exception level for debug exceptions. + */ +void HELPER(exception_bkpt_insn)(CPUARMState *env, uint32_t syndrome) +{ + raise_exception(env, EXCP_BKPT, syndrome, arm_debug_target_el(env)); +} + uint32_t HELPER(cpsr_read)(CPUARMState *env) { return cpsr_read(env) & ~(CPSR_EXEC | CPSR_RESERVED); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_insn(DisasContext *s, int offset, int excp, s->base.is_jmp = DISAS_NORETURN; } +static void gen_exception_bkpt_insn(DisasContext *s, int offset, + uint32_t syndrome) +{ + TCGv_i32 tcg_syn; + + gen_a64_set_pc_im(s->pc - offset); + tcg_syn = tcg_const_i32(syndrome); + gen_helper_exception_bkpt_insn(cpu_env, tcg_syn); + tcg_temp_free_i32(tcg_syn); + s->base.is_jmp = DISAS_NORETURN; +} + static void gen_ss_advance(DisasContext *s) { /* If the singlestep state is Active-not-pending, advance to @@ -XXX,XX +XXX,XX @@ static void disas_exc(DisasContext *s, uint32_t insn) break; } /* BRK */ - gen_exception_insn(s, 4, EXCP_BKPT, syn_aa64_bkpt(imm16), - default_exception_el(s)); + gen_exception_bkpt_insn(s, 4, syn_aa64_bkpt(imm16)); break; case 2: if (op2_ll != 0) { diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_insn(DisasContext *s, int offset, int excp, s->base.is_jmp = DISAS_NORETURN; } +static void gen_exception_bkpt_insn(DisasContext *s, int offset, uint32_t syn) +{ + TCGv_i32 tcg_syn; + + gen_set_condexec(s); + gen_set_pc_im(s, s->pc - offset); + tcg_syn = tcg_const_i32(syn); + gen_helper_exception_bkpt_insn(cpu_env, tcg_syn); + tcg_temp_free_i32(tcg_syn); + s->base.is_jmp = DISAS_NORETURN; +} + /* Force a TB lookup after an instruction that changes the CPU state. */ static inline void gen_lookup_tb(DisasContext *s) { @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) case 1: /* bkpt */ ARCH(5); - gen_exception_insn(s, 4, EXCP_BKPT, - syn_aa32_bkpt(imm16, false), - default_exception_el(s)); + gen_exception_bkpt_insn(s, 4, syn_aa32_bkpt(imm16, false)); break; case 2: /* Hypervisor call (v7) */ @@ -XXX,XX +XXX,XX @@ static void disas_thumb_insn(DisasContext *s, uint32_t insn) { int imm8 = extract32(insn, 0, 8); ARCH(5); - gen_exception_insn(s, 2, EXCP_BKPT, syn_aa32_bkpt(imm8, true), - default_exception_el(s)); + gen_exception_bkpt_insn(s, 2, syn_aa32_bkpt(imm8, true)); break; } -- 2.16.2 When a debug exception is taken to AArch32, it appears as a Prefetch Abort, and the Instruction Fault Status Register (IFSR) must be set. The IFSR has two possible formats, depending on whether LPAE is in use. Factor out the code in arm_debug_excp_handler() which picks an FSR value into its own utility function, update it to use arm_fi_to_lfsc() and arm_fi_to_sfsc() rather than hard-coded constants, and use the correct condition to select long or short format. In particular this fixes a bug where we could select the short format because we're at EL0 and the EL1 translation regime is not using LPAE, but then route the debug exception to EL2 because of MDCR_EL2.TDE and hand EL2 the wrong format FSR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180320134114.30418-3-peter.maydell@linaro.org --- target/arm/internals.h | 25 +++++++++++++++++++++++++ target/arm/op_helper.c | 12 ++---------- 2 files changed, 27 insertions(+), 10 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_secure(CPUARMState *env, ARMMMUIdx mmu_idx) } } +/* Return the FSR value for a debug exception (watchpoint, hardware + * breakpoint or BKPT insn) targeting the specified exception level. + */ +static inline uint32_t arm_debug_exception_fsr(CPUARMState *env) +{ + ARMMMUFaultInfo fi = { .type = ARMFault_Debug }; + int target_el = arm_debug_target_el(env); + bool using_lpae = false; + + if (target_el == 2 || arm_el_is_aa64(env, target_el)) { + using_lpae = true; + } else { + if (arm_feature(env, ARM_FEATURE_LPAE) && + (env->cp15.tcr_el[target_el].raw_tcr & TTBCR_EAE)) { + using_lpae = true; + } + } + + if (using_lpae) { + return arm_fi_to_lfsc(&fi); + } else { + return arm_fi_to_sfsc(&fi); + } +} + #endif diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void arm_debug_excp_handler(CPUState *cs) cs->watchpoint_hit = NULL; - if (extended_addresses_enabled(env)) { - env->exception.fsr = (1 << 9) | 0x22; - } else { - env->exception.fsr = 0x2; - } + env->exception.fsr = arm_debug_exception_fsr(env); env->exception.vaddress = wp_hit->hitaddr; raise_exception(env, EXCP_DATA_ABORT, syn_watchpoint(same_el, 0, wnr), @@ -XXX,XX +XXX,XX @@ void arm_debug_excp_handler(CPUState *cs) return; } - if (extended_addresses_enabled(env)) { - env->exception.fsr = (1 << 9) | 0x22; - } else { - env->exception.fsr = 0x2; - } + env->exception.fsr = arm_debug_exception_fsr(env); /* FAR is UNKNOWN, so doesn't need setting */ raise_exception(env, EXCP_PREFETCH_ABORT, syn_breakpoint(same_el), -- 2.16.2 Now that we have a helper function specifically for the BRK and BKPT instructions, we can set the exception.fsr there rather than in arm_cpu_do_interrupt_aarch32(). This allows us to use our new arm_debug_exception_fsr() helper. In particular this fixes a bug where we were hardcoding the short-form IFSR value, which is wrong if the target exception level has LPAE enabled. Fixes: https://bugs.launchpad.net/qemu/+bug/1756927 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180320134114.30418-4-peter.maydell@linaro.org --- target/arm/helper.c | 1 - target/arm/op_helper.c | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs) offset = 0; break; case EXCP_BKPT: - env->exception.fsr = 2; /* Fall through to prefetch abort. */ case EXCP_PREFETCH_ABORT: A32_BANKED_CURRENT_REG_SET(env, ifsr, env->exception.fsr); diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_with_syndrome)(CPUARMState *env, uint32_t excp, */ void HELPER(exception_bkpt_insn)(CPUARMState *env, uint32_t syndrome) { + /* FSR will only be used if the debug target EL is AArch32. */ + env->exception.fsr = arm_debug_exception_fsr(env); raise_exception(env, EXCP_BKPT, syndrome, arm_debug_target_el(env)); } -- 2.16.2 For debug exceptions due to breakpoints or the BKPT instruction which are taken to AArch32, the Fault Address Register is architecturally UNKNOWN. We were using that as license to simply not set env->exception.vaddress, but this isn't correct, because it will expose to the guest whatever old value was in that field when arm_cpu_do_interrupt_aarch32() writes it to the guest IFSR. That old value might be a FAR for a previous guest EL2 or secure exception, in which case we shouldn't show it to an EL1 or non-secure exception handler. It might also be a non-deterministic value, which is bad for record-and-replay. Clear env->exception.vaddress before taking breakpoint debug exceptions, to avoid this minor information leak. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180320134114.30418-5-peter.maydell@linaro.org --- target/arm/op_helper.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_bkpt_insn)(CPUARMState *env, uint32_t syndrome) { /* FSR will only be used if the debug target EL is AArch32. */ env->exception.fsr = arm_debug_exception_fsr(env); + /* FAR is UNKNOWN: clear vaddress to avoid potentially exposing + * values to the guest that it shouldn't be able to see at its + * exception/security level. + */ + env->exception.vaddress = 0; raise_exception(env, EXCP_BKPT, syndrome, arm_debug_target_el(env)); } @@ -XXX,XX +XXX,XX @@ void arm_debug_excp_handler(CPUState *cs) } env->exception.fsr = arm_debug_exception_fsr(env); - /* FAR is UNKNOWN, so doesn't need setting */ + /* FAR is UNKNOWN: clear vaddress to avoid potentially exposing + * values to the guest that it shouldn't be able to see at its + * exception/security level. + */ + env->exception.vaddress = 0; raise_exception(env, EXCP_PREFETCH_ABORT, syn_breakpoint(same_el), arm_debug_target_el(env)); -- 2.16.2 v3->v4: Windows headers define an INT type which clashed with an enum value name in arm_gicv3_its.c... The following changes since commit eae587e8e3694b1aceab23239493fb4c7e1a80f5: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-09-13' into staging (2021-09-13 11:00:30 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210913-3 for you to fetch changes up to 28e987a7e7edaa3ca7feeac65edca26145df8814: hw/arm/mps2.c: Mark internal-only I2C buses as 'full' (2021-09-13 21:01:08 +0100) ---------------------------------------------------------------- target-arm queue: * mark MPS2/MPS3 board-internal i2c buses as 'full' so that command line user-created devices are not plugged into them * Take an exception if PSTATE.IL is set * Support an emulated ITS in the virt board * Add support for kudo-bmc board * Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM * cadence_uart: Fix clock handling issues that prevented u-boot from running ---------------------------------------------------------------- Bin Meng (6): hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase hw/char: cadence_uart: Disable transmit when input clock is disabled hw/char: cadence_uart: Move clock/reset check to uart_can_receive() hw/char: cadence_uart: Convert to memop_with_attrs() ops hw/char: cadence_uart: Ignore access when unclocked or in reset for uart_{read, write}() hw/char: cadence_uart: Log a guest error when device is unclocked or in reset Chris Rauer (1): hw/arm: Add support for kudo-bmc board. Marc Zyngier (1): hw/arm/virt: KVM: Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM Peter Maydell (5): target/arm: Take an exception if PSTATE.IL is set qdev: Support marking individual buses as 'full' hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn hw/arm/mps2-tz.c: Mark internal-only I2C buses as 'full' hw/arm/mps2.c: Mark internal-only I2C buses as 'full' Richard Henderson (1): target/arm: Merge disas_a64_insn into aarch64_tr_translate_insn Shashi Mallela (9): hw/intc: GICv3 ITS initial framework hw/intc: GICv3 ITS register definitions added hw/intc: GICv3 ITS command queue framework hw/intc: GICv3 ITS Command processing hw/intc: GICv3 ITS Feature enablement hw/intc: GICv3 redistributor ITS processing tests/data/acpi/virt: Add IORT files for ITS hw/arm/virt: add ITS support in virt GIC tests/data/acpi/virt: Update IORT files for ITS docs/system/arm/nuvoton.rst | 1 + hw/intc/gicv3_internal.h | 188 ++++- include/hw/arm/virt.h | 2 + include/hw/intc/arm_gicv3_common.h | 13 + include/hw/intc/arm_gicv3_its_common.h | 32 +- include/hw/qdev-core.h | 24 + target/arm/cpu.h | 1 + target/arm/kvm_arm.h | 4 +- target/arm/syndrome.h | 5 + target/arm/translate.h | 2 + hw/arm/mps2-tz.c | 92 ++- hw/arm/mps2.c | 12 +- hw/arm/npcm7xx_boards.c | 34 + hw/arm/virt.c | 29 +- hw/char/cadence_uart.c | 61 +- hw/intc/arm_gicv3.c | 14 + hw/intc/arm_gicv3_common.c | 13 + hw/intc/arm_gicv3_cpuif.c | 7 +- hw/intc/arm_gicv3_dist.c | 5 +- hw/intc/arm_gicv3_its.c | 1322 ++++++++++++++++++++++++++++++++ hw/intc/arm_gicv3_its_common.c | 7 +- hw/intc/arm_gicv3_its_kvm.c | 2 +- hw/intc/arm_gicv3_redist.c | 153 +++- hw/misc/zynq_slcr.c | 31 +- softmmu/qdev-monitor.c | 7 +- target/arm/helper-a64.c | 1 + target/arm/helper.c | 8 + target/arm/kvm.c | 7 +- target/arm/translate-a64.c | 255 +++--- target/arm/translate.c | 21 + hw/intc/meson.build | 1 + tests/data/acpi/virt/IORT | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.memhp | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.numamem | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.pxb | Bin 0 -> 124 bytes 35 files changed, 2144 insertions(+), 210 deletions(-) create mode 100644 hw/intc/arm_gicv3_its.c create mode 100644 tests/data/acpi/virt/IORT create mode 100644 tests/data/acpi/virt/IORT.memhp create mode 100644 tests/data/acpi/virt/IORT.numamem create mode 100644 tests/data/acpi/virt/IORT.pxb