Latest run of arm patches -- most of these are Philippe's SD card cleanups. I have more in my queue to review, but 32 is enough patches to warrant sending out. thanks -- PMM The following changes since commit ff8689611a1d954897d857b28f7ef404e11cfa2c: Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-signed' into staging (2018-02-22 11:37:05 +0000) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180222 for you to fetch changes up to 4e5cc6756586e967993187657dfcdde4e00288d9: sdcard: simplify SD_SEND_OP_COND (ACMD41) (2018-02-22 15:12:54 +0000) ---------------------------------------------------------------- * New "raspi3" machine emulating RaspberryPi 3 * Fix bad register definitions for VMIDR and VMPIDR (which caused assertions for 64-bit guest CPUs with EL2 on big-endian hosts) * hw/char/stm32f2xx_usart: fix TXE/TC bit handling * Fix ast2500 protection register emulation * Lots of SD card emulation cleanups and bugfixes ---------------------------------------------------------------- Hugo Landau (1): Fix ast2500 protection register emulation Pekka Enberg (1): raspi: Add "raspi3" machine type Peter Maydell (1): target/arm: Fix register definitions for VMIDR and VMPIDR Philippe Mathieu-Daudé (28): hw/sd/milkymist-memcard: use qemu_log_mask() hw/sd/milkymist-memcard: split realize() out of SysBusDevice init() hw/sd/milkymist-memcard: expose a SDBus and connect the SDCard to it hw/sd/ssi-sd: use the SDBus API, connect the SDCard to the bus sdcard: reorder SDState struct members sdcard: replace DPRINTF() by trace events sdcard: add a trace event for command responses sdcard: replace fprintf() by qemu_hexdump() sdcard: add more trace events sdcard: define SDMMC_CMD_MAX instead of using the magic '64' sdcard: use G_BYTE from cutils sdcard: use the registerfields API to access the OCR register sdcard: Don't always set the high capacity bit sdcard: update the CSD CRC register regardless the CSD structure version sdcard: fix the 'maximum data transfer rate' to 25MHz sdcard: clean the SCR register and add few comments sdcard: remove commands from unsupported old MMC specification sdcard: simplify using the ldst API sdcard: use the correct masked OCR in the R3 reply sdcard: use the registerfields API for the CARD_STATUS register masks sdcard: handle CMD54 (SDIO) sdcard: handle the Security Specification commands sdcard: use a more descriptive label 'unimplemented_spi_cmd' sdcard: handles more commands in SPI mode sdcard: check the card is in correct state for APP CMD (CMD55) sdcard: warn if host uses an incorrect address for APP CMD (CMD55) sdcard: simplify SEND_IF_COND (CMD8) sdcard: simplify SD_SEND_OP_COND (ACMD41) Richard Braun (1): hw/char/stm32f2xx_usart: fix TXE/TC bit handling hw/sd/sdmmc-internal.h | 15 ++ include/hw/char/stm32f2xx_usart.h | 7 +- include/hw/sd/sd.h | 1 - hw/arm/raspi.c | 23 ++ hw/char/stm32f2xx_usart.c | 12 +- hw/misc/aspeed_scu.c | 6 +- hw/misc/aspeed_sdmc.c | 8 +- hw/sd/milkymist-memcard.c | 87 +++---- hw/sd/sd.c | 467 +++++++++++++++++++++++--------------- hw/sd/ssi-sd.c | 32 +-- target/arm/helper.c | 8 +- hw/sd/trace-events | 20 ++ 12 files changed, 446 insertions(+), 240 deletions(-) create mode 100644 hw/sd/sdmmc-internal.h The register definitions for VMIDR and VMPIDR have separate reginfo structs for the AArch32 and AArch64 registers. However the 32-bit versions are wrong: * they use offsetof instead of offsetoflow32 to mark where the 32-bit value lives in the uint64_t CPU state field * they don't mark themselves as ARM_CP_ALIAS In particular this means that if you try to use an Arm guest CPU which enables EL2 on a big-endian host it will assert at reset: target/arm/cpu.c:114: cp_reg_check_reset: Assertion `oldvalue == newvalue' failed. because the reset of the 32-bit register writes to the top half of the uint64_t. Correct the errors in the structures. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- This is necessary for 'make check' to pass on big endian systems with the 'raspi3' board enabled, which is the first board which has an EL2-enabled-by-default CPU. --- target/arm/helper.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "VPIDR", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, .access = PL2_RW, .accessfn = access_el3_aa32ns, - .resetvalue = cpu->midr, - .fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) }, + .resetvalue = cpu->midr, .type = ARM_CP_ALIAS, + .fieldoffset = offsetoflow32(CPUARMState, cp15.vpidr_el2) }, { .name = "VPIDR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, .access = PL2_RW, .resetvalue = cpu->midr, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "VMPIDR", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, .access = PL2_RW, .accessfn = access_el3_aa32ns, - .resetvalue = vmpidr_def, - .fieldoffset = offsetof(CPUARMState, cp15.vmpidr_el2) }, + .resetvalue = vmpidr_def, .type = ARM_CP_ALIAS, + .fieldoffset = offsetoflow32(CPUARMState, cp15.vmpidr_el2) }, { .name = "VMPIDR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, .access = PL2_RW, -- 2.16.1 From: Pekka Enberg <penberg@iki.fi> This patch adds a "raspi3" machine type, which can now be selected as the machine to run on by users via the "-M" command line option to QEMU. The machine type does *not* ignore memory transaction failures so we likely need to add some dummy devices later when people run something more complicated than what I'm using for testing. Signed-off-by: Pekka Enberg <penberg@iki.fi> [PMM: added #ifdef TARGET_AARCH64 so we don't provide the 64-bit board in the 32-bit only arm-softmmu build.] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi2_machine_init(MachineClass *mc) mc->ignore_memory_transaction_failures = true; }; DEFINE_MACHINE("raspi2", raspi2_machine_init) + +#ifdef TARGET_AARCH64 +static void raspi3_init(MachineState *machine) +{ + raspi_init(machine, 3); +} + +static void raspi3_machine_init(MachineClass *mc) +{ + mc->desc = "Raspberry Pi 3"; + mc->init = raspi3_init; + mc->block_default_type = IF_SD; + mc->no_parallel = 1; + mc->no_floppy = 1; + mc->no_cdrom = 1; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"); + mc->max_cpus = BCM2836_NCPUS; + mc->min_cpus = BCM2836_NCPUS; + mc->default_cpus = BCM2836_NCPUS; + mc->default_ram_size = 1024 * 1024 * 1024; +} +DEFINE_MACHINE("raspi3", raspi3_machine_init) +#endif -- 2.16.1 From: Richard Braun <rbraun@sceen.net> I/O currently being synchronous, there is no reason to ever clear the SR_TXE bit. However the SR_TC bit may be cleared by software writing to the SR register, so set it on each write. In addition, fix the reset value of the USART status register. Signed-off-by: Richard Braun <rbraun@sceen.net> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> [PMM: removed XXX tag from comment, since it isn't something we need to come back and fix in QEMU] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/stm32f2xx_usart.h | 7 ++++++- hw/char/stm32f2xx_usart.c | 12 ++++++++---- 2 files changed, 14 insertions(+), 5 deletions(-) diff --git a/include/hw/char/stm32f2xx_usart.h b/include/hw/char/stm32f2xx_usart.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/stm32f2xx_usart.h +++ b/include/hw/char/stm32f2xx_usart.h @@ -XXX,XX +XXX,XX @@ #define USART_CR3 0x14 #define USART_GTPR 0x18 -#define USART_SR_RESET 0x00C00000 +/* + * NB: The reset value mentioned in "24.6.1 Status register" seems bogus. + * Looking at "Table 98 USART register map and reset values", it seems it + * should be 0xc0, and that's how real hardware behaves. + */ +#define USART_SR_RESET (USART_SR_TXE | USART_SR_TC) #define USART_SR_TXE (1 << 7) #define USART_SR_TC (1 << 6) diff --git a/hw/char/stm32f2xx_usart.c b/hw/char/stm32f2xx_usart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/stm32f2xx_usart.c +++ b/hw/char/stm32f2xx_usart.c @@ -XXX,XX +XXX,XX @@ static uint64_t stm32f2xx_usart_read(void *opaque, hwaddr addr, switch (addr) { case USART_SR: retvalue = s->usart_sr; - s->usart_sr &= ~USART_SR_TC; qemu_chr_fe_accept_input(&s->chr); return retvalue; case USART_DR: DB_PRINT("Value: 0x%" PRIx32 ", %c\n", s->usart_dr, (char) s->usart_dr); - s->usart_sr |= USART_SR_TXE; s->usart_sr &= ~USART_SR_RXNE; qemu_chr_fe_accept_input(&s->chr); qemu_set_irq(s->irq, 0); @@ -XXX,XX +XXX,XX @@ static void stm32f2xx_usart_write(void *opaque, hwaddr addr, switch (addr) { case USART_SR: if (value <= 0x3FF) { - s->usart_sr = value; + /* I/O being synchronous, TXE is always set. In addition, it may + only be set by hardware, so keep it set here. */ + s->usart_sr = value | USART_SR_TXE; } else { s->usart_sr &= value; } @@ -XXX,XX +XXX,XX @@ static void stm32f2xx_usart_write(void *opaque, hwaddr addr, /* XXX this blocks entire thread. Rewrite to use * qemu_chr_fe_write and background I/O callbacks */ qemu_chr_fe_write_all(&s->chr, &ch, 1); + /* XXX I/O are currently synchronous, making it impossible for + software to observe transient states where TXE or TC aren't + set. Unlike TXE however, which is read-only, software may + clear TC by writing 0 to the SR register, so set it again + on each write. */ s->usart_sr |= USART_SR_TC; - s->usart_sr &= ~USART_SR_TXE; } return; case USART_BRR: -- 2.16.1 From: Hugo Landau <hlandau@devever.net> Some register blocks of the ast2500 are protected by protection key registers which require the right magic value to be written to those registers to allow those registers to be mutated. Register manuals indicate that writing the correct magic value to these registers should cause subsequent reads from those values to return 1, and writing any other value should cause subsequent reads to return 0. Previously, qemu implemented these registers incorrectly: the registers were handled as simple memory, meaning that writing some value x to a protection key register would result in subsequent reads from that register returning the same value x. The protection was implemented by ensuring that the current value of that register equaled the magic value. This modifies qemu to have the correct behaviour: attempts to write to a ast2500 protection register results in a transition to 1 or 0 depending on whether the written value is the correct magic. The protection logic is updated to ensure that the value of the register is nonzero. This bug caused deadlocks with u-boot HEAD: when u-boot is done with a protectable register block, it attempts to lock it by writing the bitwise inverse of the correct magic value, and then spinning forever until the register reads as zero. Since qemu implemented writes to these registers as ordinary memory writes, writing the inverse of the magic value resulted in subsequent reads returning that value, leading to u-boot spinning forever. Signed-off-by: Hugo Landau <hlandau@devever.net> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180220132627.4163-1-hlandau@devever.net [PMM: fixed incorrect code indentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/aspeed_scu.c | 6 +++++- hw/misc/aspeed_sdmc.c | 8 +++++++- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_scu.c +++ b/hw/misc/aspeed_scu.c @@ -XXX,XX +XXX,XX @@ static void aspeed_scu_write(void *opaque, hwaddr offset, uint64_t data, } if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 && - s->regs[PROT_KEY] != ASPEED_SCU_PROT_KEY) { + !s->regs[PROT_KEY]) { qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); return; } @@ -XXX,XX +XXX,XX @@ static void aspeed_scu_write(void *opaque, hwaddr offset, uint64_t data, trace_aspeed_scu_write(offset, size, data); switch (reg) { + case PROT_KEY: + s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; + return; + case FREQ_CNTR_EVAL: case VGA_SCRATCH1 ... VGA_SCRATCH8: case RNG_DATA: diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data, return; } - if (addr != R_PROT && s->regs[R_PROT] != PROT_KEY_UNLOCK) { + if (addr == R_PROT) { + s->regs[addr] = (data == PROT_KEY_UNLOCK) ? 1 : 0; + return; + } + + if (!s->regs[R_PROT]) { qemu_log_mask(LOG_GUEST_ERROR, "%s: SDMC is locked!\n", __func__); return; } @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data, data &= ~ASPEED_SDMC_READONLY_MASK; break; case AST2500_A0_SILICON_REV: + case AST2500_A1_SILICON_REV: data &= ~ASPEED_SDMC_AST2500_READONLY_MASK; break; default: -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Michael Walle <michael@walle.cc> Message-id: 20180216022933.10945-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/milkymist-memcard.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/hw/sd/milkymist-memcard.c b/hw/sd/milkymist-memcard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/milkymist-memcard.c +++ b/hw/sd/milkymist-memcard.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/log.h" #include "hw/hw.h" #include "hw/sysbus.h" #include "sysemu/sysemu.h" #include "trace.h" -#include "qemu/error-report.h" +#include "include/qapi/error.h" #include "sysemu/block-backend.h" #include "sysemu/blockdev.h" #include "hw/sd/sd.h" @@ -XXX,XX +XXX,XX @@ static uint64_t memcard_read(void *opaque, hwaddr addr, } else { r = s->response[s->response_read_ptr++]; if (s->response_read_ptr > s->response_len) { - error_report("milkymist_memcard: " - "read more cmd bytes than available. Clipping."); + qemu_log_mask(LOG_GUEST_ERROR, "milkymist_memcard: " + "read more cmd bytes than available. Clipping."); s->response_read_ptr = 0; } } @@ -XXX,XX +XXX,XX @@ static uint64_t memcard_read(void *opaque, hwaddr addr, break; default: - error_report("milkymist_memcard: read access to unknown register 0x" - TARGET_FMT_plx, addr << 2); + qemu_log_mask(LOG_UNIMP, "milkymist_memcard: " + "read access to unknown register 0x%" HWADDR_PRIx "\n", + addr << 2); break; } @@ -XXX,XX +XXX,XX @@ static void memcard_write(void *opaque, hwaddr addr, uint64_t value, break; default: - error_report("milkymist_memcard: write access to unknown register 0x" - TARGET_FMT_plx, addr << 2); + qemu_log_mask(LOG_UNIMP, "milkymist_memcard: " + "write access to unknown register 0x%" HWADDR_PRIx " " + "(value 0x%" PRIx64 ")\n", addr << 2, value); break; } } -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Create the SDCard in the realize() function. Suggested-by: Michael Walle <michael@walle.cc> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Michael Walle <michael@walle.cc> Message-id: 20180216022933.10945-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/milkymist-memcard.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) diff --git a/hw/sd/milkymist-memcard.c b/hw/sd/milkymist-memcard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/milkymist-memcard.c +++ b/hw/sd/milkymist-memcard.c @@ -XXX,XX +XXX,XX @@ static void milkymist_memcard_reset(DeviceState *d) device_reset(DEVICE(s->card)); } -static int milkymist_memcard_init(SysBusDevice *dev) +static void milkymist_memcard_init(Object *obj) +{ + MilkymistMemcardState *s = MILKYMIST_MEMCARD(obj); + SysBusDevice *dev = SYS_BUS_DEVICE(obj); + + memory_region_init_io(&s->regs_region, OBJECT(s), &memcard_mmio_ops, s, + "milkymist-memcard", R_MAX * 4); + sysbus_init_mmio(dev, &s->regs_region); +} + +static void milkymist_memcard_realize(DeviceState *dev, Error **errp) { MilkymistMemcardState *s = MILKYMIST_MEMCARD(dev); - DriveInfo *dinfo; BlockBackend *blk; + DriveInfo *dinfo; /* FIXME use a qdev drive property instead of drive_get_next() */ dinfo = drive_get_next(IF_SD); blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL; s->card = sd_init(blk, false); if (s->card == NULL) { - return -1; + error_setg(errp, "failed to init SD card"); + return; } - s->enabled = blk && blk_is_inserted(blk); - - memory_region_init_io(&s->regs_region, OBJECT(s), &memcard_mmio_ops, s, - "milkymist-memcard", R_MAX * 4); - sysbus_init_mmio(dev, &s->regs_region); - - return 0; } static const VMStateDescription vmstate_milkymist_memcard = { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_milkymist_memcard = { static void milkymist_memcard_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); - SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); - k->init = milkymist_memcard_init; + dc->realize = milkymist_memcard_realize; dc->reset = milkymist_memcard_reset; dc->vmsd = &vmstate_milkymist_memcard; /* Reason: init() method uses drive_get_next() */ @@ -XXX,XX +XXX,XX @@ static const TypeInfo milkymist_memcard_info = { .name = TYPE_MILKYMIST_MEMCARD, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(MilkymistMemcardState), + .instance_init = milkymist_memcard_init, .class_init = milkymist_memcard_class_init, }; -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> using the sdbus_*() API. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Michael Walle <michael@walle.cc> Message-id: 20180216022933.10945-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/milkymist-memcard.c | 38 +++++++++++++++++++++----------------- 1 file changed, 21 insertions(+), 17 deletions(-) diff --git a/hw/sd/milkymist-memcard.c b/hw/sd/milkymist-memcard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/milkymist-memcard.c +++ b/hw/sd/milkymist-memcard.c @@ -XXX,XX +XXX,XX @@ struct MilkymistMemcardState { SysBusDevice parent_obj; MemoryRegion regs_region; - SDState *card; + SDBus sdbus; int command_write_ptr; int response_read_ptr; @@ -XXX,XX +XXX,XX @@ static void memcard_sd_command(MilkymistMemcardState *s) req.crc = s->command[5]; s->response[0] = req.cmd; - s->response_len = sd_do_command(s->card, &req, s->response+1); + s->response_len = sdbus_do_command(&s->sdbus, &req, s->response + 1); s->response_read_ptr = 0; if (s->response_len == 16) { @@ -XXX,XX +XXX,XX @@ static uint64_t memcard_read(void *opaque, hwaddr addr, r = 0xffffffff; } else { r = 0; - r |= sd_read_data(s->card) << 24; - r |= sd_read_data(s->card) << 16; - r |= sd_read_data(s->card) << 8; - r |= sd_read_data(s->card); + r |= sdbus_read_data(&s->sdbus) << 24; + r |= sdbus_read_data(&s->sdbus) << 16; + r |= sdbus_read_data(&s->sdbus) << 8; + r |= sdbus_read_data(&s->sdbus); } break; case R_CLK2XDIV: @@ -XXX,XX +XXX,XX @@ static void memcard_write(void *opaque, hwaddr addr, uint64_t value, if (!s->enabled) { break; } - sd_write_data(s->card, (value >> 24) & 0xff); - sd_write_data(s->card, (value >> 16) & 0xff); - sd_write_data(s->card, (value >> 8) & 0xff); - sd_write_data(s->card, value & 0xff); + sdbus_write_data(&s->sdbus, (value >> 24) & 0xff); + sdbus_write_data(&s->sdbus, (value >> 16) & 0xff); + sdbus_write_data(&s->sdbus, (value >> 8) & 0xff); + sdbus_write_data(&s->sdbus, value & 0xff); break; case R_ENABLE: s->regs[addr] = value; @@ -XXX,XX +XXX,XX @@ static void milkymist_memcard_reset(DeviceState *d) for (i = 0; i < R_MAX; i++) { s->regs[i] = 0; } - /* Since we're still using the legacy SD API the card is not plugged - * into any bus, and we must reset it manually. - */ - device_reset(DEVICE(s->card)); } static void milkymist_memcard_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void milkymist_memcard_init(Object *obj) static void milkymist_memcard_realize(DeviceState *dev, Error **errp) { MilkymistMemcardState *s = MILKYMIST_MEMCARD(dev); + DeviceState *carddev; BlockBackend *blk; DriveInfo *dinfo; + Error *err = NULL; + qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), TYPE_SD_BUS, + dev, "sd-bus"); + + /* Create and plug in the sd card */ /* FIXME use a qdev drive property instead of drive_get_next() */ dinfo = drive_get_next(IF_SD); blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL; - s->card = sd_init(blk, false); - if (s->card == NULL) { - error_setg(errp, "failed to init SD card"); + carddev = qdev_create(&s->sdbus.qbus, TYPE_SD_CARD); + qdev_prop_set_drive(carddev, "drive", blk, &err); + object_property_set_bool(OBJECT(carddev), true, "realized", &err); + if (err) { + error_setg(errp, "failed to init SD card: %s", error_get_pretty(err)); return; } s->enabled = blk && blk_is_inserted(blk); -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> On reset the bus will reset the card, we can now drop the device_reset() call. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180216022933.10945-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/ssi-sd.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/ssi-sd.c +++ b/hw/sd/ssi-sd.c @@ -XXX,XX +XXX,XX @@ typedef struct { int32_t arglen; int32_t response_pos; int32_t stopping; - SDState *sd; + SDBus sdbus; } ssi_sd_state; #define TYPE_SSI_SD "ssi-sd" @@ -XXX,XX +XXX,XX @@ static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val) request.arg = (s->cmdarg[0] << 24) | (s->cmdarg[1] << 16) | (s->cmdarg[2] << 8) | s->cmdarg[3]; DPRINTF("CMD%d arg 0x%08x\n", s->cmd, request.arg); - s->arglen = sd_do_command(s->sd, &request, longresp); + s->arglen = sdbus_do_command(&s->sdbus, &request, longresp); if (s->arglen <= 0) { s->arglen = 1; s->response[0] = 4; @@ -XXX,XX +XXX,XX @@ static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val) DPRINTF("Response 0x%02x\n", s->response[s->response_pos]); return s->response[s->response_pos++]; } - if (sd_data_ready(s->sd)) { + if (sdbus_data_ready(&s->sdbus)) { DPRINTF("Data read\n"); s->mode = SSI_SD_DATA_START; } else { @@ -XXX,XX +XXX,XX @@ static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val) s->mode = SSI_SD_DATA_READ; return 0xfe; case SSI_SD_DATA_READ: - val = sd_read_data(s->sd); - if (!sd_data_ready(s->sd)) { + val = sdbus_read_data(&s->sdbus); + if (!sdbus_data_ready(&s->sdbus)) { DPRINTF("Data read end\n"); s->mode = SSI_SD_CMD; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_ssi_sd = { static void ssi_sd_realize(SSISlave *d, Error **errp) { ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, d); + DeviceState *carddev; DriveInfo *dinfo; + Error *err = NULL; + qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), TYPE_SD_BUS, + DEVICE(d), "sd-bus"); + + /* Create and plug in the sd card */ /* FIXME use a qdev drive property instead of drive_get_next() */ dinfo = drive_get_next(IF_SD); - s->sd = sd_init(dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, true); - if (s->sd == NULL) { - error_setg(errp, "Device initialization failed."); + carddev = qdev_create(&s->sdbus.qbus, TYPE_SD_CARD); + if (dinfo) { + qdev_prop_set_drive(carddev, "drive", blk_by_legacy_dinfo(dinfo), &err); + } + object_property_set_bool(OBJECT(carddev), true, "spi", &err); + object_property_set_bool(OBJECT(carddev), true, "realized", &err); + if (err) { + error_setg(errp, "failed to init SD card: %s", error_get_pretty(err)); return; } } @@ -XXX,XX +XXX,XX @@ static void ssi_sd_reset(DeviceState *dev) s->arglen = 0; s->response_pos = 0; s->stopping = 0; - - /* Since we're still using the legacy SD API the card is not plugged - * into any bus, and we must reset it manually. - */ - device_reset(DEVICE(s->sd)); } static void ssi_sd_class_init(ObjectClass *klass, void *data) -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> place card registers first, this will ease further code movements. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ enum SDCardStates { struct SDState { DeviceState parent_obj; - uint32_t mode; /* current card mode, one of SDCardModes */ - int32_t state; /* current card state, one of SDCardStates */ + /* SD Memory Card Registers */ uint32_t ocr; - QEMUTimer *ocr_power_timer; uint8_t scr[8]; uint8_t cid[16]; uint8_t csd[16]; uint16_t rca; uint32_t card_status; uint8_t sd_status[64]; + + /* Configurable properties */ + BlockBackend *blk; + bool spi; + + uint32_t mode; /* current card mode, one of SDCardModes */ + int32_t state; /* current card state, one of SDCardStates */ uint32_t vhs; bool wp_switch; unsigned long *wp_groups; @@ -XXX,XX +XXX,XX @@ struct SDState { uint8_t pwd[16]; uint32_t pwd_len; uint8_t function_group[6]; - - bool spi; uint8_t current_cmd; /* True if we will handle the next command as an ACMD. Note that this does * *not* track the APP_CMD status bit! @@ -XXX,XX +XXX,XX @@ struct SDState { uint8_t data[512]; qemu_irq readonly_cb; qemu_irq inserted_cb; - BlockBackend *blk; - + QEMUTimer *ocr_power_timer; bool enable; uint8_t dat_lines; bool cmd_line; -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 32 ++++++++++++++++++++++++++------ hw/sd/trace-events | 6 ++++++ 2 files changed, 32 insertions(+), 6 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "qemu/timer.h" #include "qemu/log.h" +#include "trace.h" //#define DEBUG_SD 1 @@ -XXX,XX +XXX,XX @@ struct SDState { bool cmd_line; }; +static const char *sd_state_name(enum SDCardStates state) +{ + static const char *state_name[] = { + [sd_idle_state] = "idle", + [sd_ready_state] = "ready", + [sd_identification_state] = "identification", + [sd_standby_state] = "standby", + [sd_transfer_state] = "transfer", + [sd_sendingdata_state] = "sendingdata", + [sd_receivingdata_state] = "receivingdata", + [sd_programming_state] = "programming", + [sd_disconnect_state] = "disconnect", + }; + if (state == sd_inactive_state) { + return "inactive"; + } + assert(state <= ARRAY_SIZE(state_name)); + return state_name[state]; +} + static uint8_t sd_get_dat_lines(SDState *sd) { return sd->enable ? sd->dat_lines : 0; @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, uint32_t rca = 0x0000; uint64_t addr = (sd->ocr & (1 << 30)) ? (uint64_t) req.arg << 9 : req.arg; + trace_sdcard_normal_command(req.cmd, req.arg, sd_state_name(sd->state)); + /* Not interpreting this as an app command */ sd->card_status &= ~APP_CMD; @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, sd->multi_blk_cnt = 0; } - DPRINTF("CMD%d 0x%08x state %d\n", req.cmd, req.arg, sd->state); switch (req.cmd) { /* Basic commands (Class 0 and Class 1) */ case 0: /* CMD0: GO_IDLE_STATE */ @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, return sd_r1; case 56: /* CMD56: GEN_CMD */ - fprintf(stderr, "SD: GEN_CMD 0x%08x\n", req.arg); - switch (sd->state) { case sd_transfer_state: sd->data_offset = 0; @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, static sd_rsp_type_t sd_app_command(SDState *sd, SDRequest req) { - DPRINTF("ACMD%d 0x%08x\n", req.cmd, req.arg); + trace_sdcard_app_command(req.cmd, req.arg); sd->card_status |= APP_CMD; switch (req.cmd) { case 6: /* ACMD6: SET_BUS_WIDTH */ @@ -XXX,XX +XXX,XX @@ send_response: static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len) { - DPRINTF("sd_blk_read: addr = 0x%08llx, len = %d\n", - (unsigned long long) addr, len); + trace_sdcard_read_block(addr, len); if (!sd->blk || blk_pread(sd->blk, addr, sd->data, len) < 0) { fprintf(stderr, "sd_blk_read: read error on host side\n"); } @@ -XXX,XX +XXX,XX @@ static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len) static void sd_blk_write(SDState *sd, uint64_t addr, uint32_t len) { + trace_sdcard_write_block(addr, len); if (!sd->blk || blk_pwrite(sd->blk, addr, sd->data, len, 0) < 0) { fprintf(stderr, "sd_blk_write: write error on host side\n"); } diff --git a/hw/sd/trace-events b/hw/sd/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/trace-events +++ b/hw/sd/trace-events @@ -XXX,XX +XXX,XX @@ sdhci_read_dataport(uint16_t data_count) "all %u bytes of data have been read fr sdhci_write_dataport(uint16_t data_count) "write buffer filled with %u bytes of data" sdhci_capareg(const char *desc, uint16_t val) "%s: %u" +# hw/sd/sd.c +sdcard_normal_command(uint8_t cmd, uint32_t arg, const char *state) "CMD%d arg 0x%08x (state %s)" +sdcard_app_command(uint8_t acmd, uint32_t arg) "ACMD%d arg 0x%08x" +sdcard_read_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x" +sdcard_write_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x" + # hw/sd/milkymist-memcard.c milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180215220540.6556-4-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 27 ++++++++++++++++++++++++--- hw/sd/trace-events | 1 + 2 files changed, 25 insertions(+), 3 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static const char *sd_state_name(enum SDCardStates state) return state_name[state]; } +static const char *sd_response_name(sd_rsp_type_t rsp) +{ + static const char *response_name[] = { + [sd_r0] = "RESP#0 (no response)", + [sd_r1] = "RESP#1 (normal cmd)", + [sd_r2_i] = "RESP#2 (CID reg)", + [sd_r2_s] = "RESP#2 (CSD reg)", + [sd_r3] = "RESP#3 (OCR reg)", + [sd_r6] = "RESP#6 (RCA)", + [sd_r7] = "RESP#7 (operating voltage)", + }; + if (rsp == sd_illegal) { + return "ILLEGAL RESP"; + } + if (rsp == sd_r1b) { + rsp = sd_r1; + } + assert(rsp <= ARRAY_SIZE(response_name)); + return response_name[rsp]; +} + static uint8_t sd_get_dat_lines(SDState *sd) { return sd->enable ? sd->dat_lines : 0; @@ -XXX,XX +XXX,XX @@ send_response: case sd_r0: case sd_illegal: - default: rsplen = 0; break; + default: + g_assert_not_reached(); } + trace_sdcard_response(sd_response_name(rtype), rsplen); if (rtype != sd_illegal) { /* Clear the "clear on valid command" status bits now we've @@ -XXX,XX +XXX,XX @@ send_response: DPRINTF(" %02x", response[i]); } DPRINTF(" state %d\n", sd->state); - } else { - DPRINTF("No response %d\n", sd->state); } #endif diff --git a/hw/sd/trace-events b/hw/sd/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/trace-events +++ b/hw/sd/trace-events @@ -XXX,XX +XXX,XX @@ sdhci_capareg(const char *desc, uint16_t val) "%s: %u" # hw/sd/sd.c sdcard_normal_command(uint8_t cmd, uint32_t arg, const char *state) "CMD%d arg 0x%08x (state %s)" sdcard_app_command(uint8_t acmd, uint32_t arg) "ACMD%d arg 0x%08x" +sdcard_response(const char *rspdesc, int rsplen) "%s (sz:%d)" sdcard_read_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x" sdcard_write_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x" -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ //#define DEBUG_SD 1 -#ifdef DEBUG_SD -#define DPRINTF(fmt, ...) \ -do { fprintf(stderr, "SD: " fmt , ## __VA_ARGS__); } while (0) -#else -#define DPRINTF(fmt, ...) do {} while(0) -#endif - #define ACMD41_ENQUIRY_MASK 0x00ffffff #define OCR_POWER_UP 0x80000000 #define OCR_POWER_DELAY_NS 500000 /* 0.5ms */ @@ -XXX,XX +XXX,XX @@ send_response: } #ifdef DEBUG_SD - if (rsplen) { - int i; - DPRINTF("Response:"); - for (i = 0; i < rsplen; i++) { - DPRINTF(" %02x", response[i]); - } - DPRINTF(" state %d\n", sd->state); - } + qemu_hexdump((const char *)response, stderr, "Response", rsplen); #endif return rsplen; -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-6-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 32 ++++++++++++++++++++++++++------ hw/sd/trace-events | 13 +++++++++++++ 2 files changed, 39 insertions(+), 6 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static bool sd_get_cmd_line(SDState *sd) static void sd_set_voltage(SDState *sd, uint16_t millivolts) { + trace_sdcard_set_voltage(millivolts); + switch (millivolts) { case 3001 ... 3600: /* SD_VOLTAGE_3_3V */ case 2001 ... 3000: /* SD_VOLTAGE_3_0V */ @@ -XXX,XX +XXX,XX @@ static void sd_ocr_powerup(void *opaque) { SDState *sd = opaque; + trace_sdcard_powerup(); /* Set powered up bit in OCR */ assert(!(sd->ocr & OCR_POWER_UP)); sd->ocr |= OCR_POWER_UP; @@ -XXX,XX +XXX,XX @@ static void sd_reset(DeviceState *dev) uint64_t size; uint64_t sect; + trace_sdcard_reset(); if (sd->blk) { blk_get_geometry(sd->blk, &sect); } else { @@ -XXX,XX +XXX,XX @@ static void sd_cardchange(void *opaque, bool load, Error **errp) bool readonly = sd_get_readonly(sd); if (inserted) { + trace_sdcard_inserted(readonly); sd_reset(dev); + } else { + trace_sdcard_ejected(); } /* The IRQ notification is for legacy non-QOM SD controller devices; @@ -XXX,XX +XXX,XX @@ static void sd_erase(SDState *sd) uint64_t erase_start = sd->erase_start; uint64_t erase_end = sd->erase_end; + trace_sdcard_erase(); if (!sd->erase_start || !sd->erase_end) { sd->card_status |= ERASE_SEQ_ERROR; return; @@ -XXX,XX +XXX,XX @@ static void sd_lock_command(SDState *sd) else pwd_len = 0; + if (lock) { + trace_sdcard_lock(); + } else { + trace_sdcard_unlock(); + } if (erase) { if (!(sd->card_status & CARD_IS_LOCKED) || sd->blk_len > 1 || set_pwd || clr_pwd || lock || sd->wp_switch || @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, case 16: /* CMD16: SET_BLOCKLEN */ switch (sd->state) { case sd_transfer_state: - if (req.arg > (1 << HWBLOCK_SHIFT)) + if (req.arg > (1 << HWBLOCK_SHIFT)) { sd->card_status |= BLOCK_LEN_ERROR; - else + } else { + trace_sdcard_set_blocklen(req.arg); sd->blk_len = req.arg; + } return sd_r1; @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_app_command(SDState *sd, if ((req.arg & ACMD41_ENQUIRY_MASK) != 0) { timer_del(sd->ocr_power_timer); sd_ocr_powerup(sd); - } else if (!timer_pending(sd->ocr_power_timer)) { - timer_mod_ns(sd->ocr_power_timer, - (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - + OCR_POWER_DELAY_NS)); + } else { + trace_sdcard_inquiry_cmd41(); + if (!timer_pending(sd->ocr_power_timer)) { + timer_mod_ns(sd->ocr_power_timer, + (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + + OCR_POWER_DELAY_NS)); + } } } @@ -XXX,XX +XXX,XX @@ void sd_write_data(SDState *sd, uint8_t value) if (sd->card_status & (ADDRESS_ERROR | WP_VIOLATION)) return; + trace_sdcard_write_data(sd->current_cmd, value); switch (sd->current_cmd) { case 24: /* CMD24: WRITE_SINGLE_BLOCK */ sd->data[sd->data_offset ++] = value; @@ -XXX,XX +XXX,XX @@ uint8_t sd_read_data(SDState *sd) io_len = (sd->ocr & (1 << 30)) ? 512 : sd->blk_len; + trace_sdcard_read_data(sd->current_cmd, io_len); switch (sd->current_cmd) { case 6: /* CMD6: SWITCH_FUNCTION */ ret = sd->data[sd->data_offset ++]; diff --git a/hw/sd/trace-events b/hw/sd/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/trace-events +++ b/hw/sd/trace-events @@ -XXX,XX +XXX,XX @@ sdhci_capareg(const char *desc, uint16_t val) "%s: %u" sdcard_normal_command(uint8_t cmd, uint32_t arg, const char *state) "CMD%d arg 0x%08x (state %s)" sdcard_app_command(uint8_t acmd, uint32_t arg) "ACMD%d arg 0x%08x" sdcard_response(const char *rspdesc, int rsplen) "%s (sz:%d)" +sdcard_powerup(void) "" +sdcard_inquiry_cmd41(void) "" +sdcard_set_enable(bool current_state, bool new_state) "%u -> %u" +sdcard_reset(void) "" +sdcard_set_blocklen(uint16_t length) "0x%04x" +sdcard_inserted(bool readonly) "read_only: %u" +sdcard_ejected(void) "" +sdcard_erase(void) "" +sdcard_lock(void) "" +sdcard_unlock(void) "" sdcard_read_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x" sdcard_write_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x" +sdcard_write_data(uint8_t cmd, uint8_t value) "CMD%02d value 0x%02x" +sdcard_read_data(uint8_t cmd, int length) "CMD%02d len %d" +sdcard_set_voltage(uint16_t millivolts) "%u mV" # hw/sd/milkymist-memcard.c milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sdmmc-internal.h | 15 +++++++++++++++ hw/sd/sd.c | 22 ++++++++++++++++------ 2 files changed, 31 insertions(+), 6 deletions(-) create mode 100644 hw/sd/sdmmc-internal.h diff --git a/hw/sd/sdmmc-internal.h b/hw/sd/sdmmc-internal.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/sd/sdmmc-internal.h @@ -XXX,XX +XXX,XX @@ +/* + * SD/MMC cards common + * + * Copyright (c) 2018 Philippe Mathieu-Daudé <f4bug@amsat.org> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ +#ifndef SD_INTERNAL_H +#define SD_INTERNAL_H + +#define SDMMC_CMD_MAX 64 + +#endif diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "qemu/timer.h" #include "qemu/log.h" +#include "sdmmc-internal.h" #include "trace.h" //#define DEBUG_SD 1 @@ -XXX,XX +XXX,XX @@ static void sd_set_mode(SDState *sd) } } -static const sd_cmd_type_t sd_cmd_type[64] = { +static const sd_cmd_type_t sd_cmd_type[SDMMC_CMD_MAX] = { sd_bc, sd_none, sd_bcr, sd_bcr, sd_none, sd_none, sd_none, sd_ac, sd_bcr, sd_ac, sd_ac, sd_adtc, sd_ac, sd_ac, sd_none, sd_ac, + /* 16 */ sd_ac, sd_adtc, sd_adtc, sd_none, sd_none, sd_none, sd_none, sd_none, sd_adtc, sd_adtc, sd_adtc, sd_adtc, sd_ac, sd_ac, sd_adtc, sd_none, + /* 32 */ sd_ac, sd_ac, sd_none, sd_none, sd_none, sd_none, sd_ac, sd_none, sd_none, sd_none, sd_bc, sd_none, sd_none, sd_none, sd_none, sd_none, + /* 48 */ sd_none, sd_none, sd_none, sd_none, sd_none, sd_none, sd_none, sd_ac, sd_adtc, sd_none, sd_none, sd_none, sd_none, sd_none, sd_none, sd_none, }; -static const int sd_cmd_class[64] = { +static const int sd_cmd_class[SDMMC_CMD_MAX] = { 0, 0, 0, 0, 0, 9, 10, 0, 0, 0, 0, 1, 0, 0, 0, 0, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 6, 6, 6, 6, 5, 5, 10, 10, 10, 10, 5, 9, 9, 9, 7, 7, 7, 7, 7, 7, @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, /* Not interpreting this as an app command */ sd->card_status &= ~APP_CMD; - if (sd_cmd_type[req.cmd & 0x3F] == sd_ac - || sd_cmd_type[req.cmd & 0x3F] == sd_adtc) { + if (sd_cmd_type[req.cmd] == sd_ac + || sd_cmd_type[req.cmd] == sd_adtc) { rca = req.arg >> 16; } @@ -XXX,XX +XXX,XX @@ static int cmd_valid_while_locked(SDState *sd, SDRequest *req) if (req->cmd == 16 || req->cmd == 55) { return 1; } - return sd_cmd_class[req->cmd & 0x3F] == 0 - || sd_cmd_class[req->cmd & 0x3F] == 7; + return sd_cmd_class[req->cmd] == 0 + || sd_cmd_class[req->cmd] == 7; } int sd_do_command(SDState *sd, SDRequest *req, @@ -XXX,XX +XXX,XX @@ int sd_do_command(SDState *sd, SDRequest *req, goto send_response; } + if (req->cmd >= SDMMC_CMD_MAX) { + qemu_log_mask(LOG_GUEST_ERROR, "SD: incorrect command 0x%02x\n", + req->cmd); + req->cmd &= 0x3f; + } + if (sd->card_status & CARD_IS_LOCKED) { if (!cmd_valid_while_locked(sd, req)) { sd->card_status |= ILLEGAL_COMMAND; -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> code is now easier to read. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-11-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ #include "hw/sd/sd.h" #include "qapi/error.h" #include "qemu/bitmap.h" +#include "qemu/cutils.h" #include "hw/qdev-properties.h" #include "qemu/error-report.h" #include "qemu/timer.h" @@ -XXX,XX +XXX,XX @@ static void sd_set_csd(SDState *sd, uint64_t size) uint32_t sectsize = (1 << (SECTOR_SHIFT + 1)) - 1; uint32_t wpsize = (1 << (WPGROUP_SHIFT + 1)) - 1; - if (size <= 0x40000000) { /* Standard Capacity SD */ + if (size <= 1 * G_BYTE) { /* Standard Capacity SD */ sd->csd[0] = 0x00; /* CSD structure */ sd->csd[1] = 0x26; /* Data read access-time-1 */ sd->csd[2] = 0x00; /* Data read access-time-2 */ -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-12-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/sd.h | 1 - hw/sd/sd.c | 21 +++++++++++++-------- 2 files changed, 13 insertions(+), 9 deletions(-) diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/sd.h +++ b/include/hw/sd/sd.h @@ -XXX,XX +XXX,XX @@ #define READY_FOR_DATA (1 << 8) #define APP_CMD (1 << 5) #define AKE_SEQ_ERROR (1 << 3) -#define OCR_CCS_BITN 30 typedef enum { SD_VOLTAGE_0_4V = 400, /* currently not supported */ diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/qdev.h" #include "hw/hw.h" +#include "hw/registerfields.h" #include "sysemu/block-backend.h" #include "hw/sd/sd.h" #include "qapi/error.h" @@ -XXX,XX +XXX,XX @@ //#define DEBUG_SD 1 #define ACMD41_ENQUIRY_MASK 0x00ffffff -#define OCR_POWER_UP 0x80000000 -#define OCR_POWER_DELAY_NS 500000 /* 0.5ms */ typedef enum { sd_r0 = 0, /* no response */ @@ -XXX,XX +XXX,XX @@ static uint16_t sd_crc16(void *message, size_t width) return shift_reg; } +#define OCR_POWER_DELAY_NS 500000 /* 0.5ms */ + +FIELD(OCR, CARD_CAPACITY, 30, 1) /* 0:SDSC, 1:SDHC/SDXC */ +FIELD(OCR, CARD_POWER_UP, 31, 1) + static void sd_set_ocr(SDState *sd) { /* All voltages OK, Standard Capacity SD Memory Card, not yet powered up */ @@ -XXX,XX +XXX,XX @@ static void sd_ocr_powerup(void *opaque) SDState *sd = opaque; trace_sdcard_powerup(); - /* Set powered up bit in OCR */ - assert(!(sd->ocr & OCR_POWER_UP)); - sd->ocr |= OCR_POWER_UP; + assert(!FIELD_EX32(sd->ocr, OCR, CARD_POWER_UP)); + + /* card power-up OK */ + sd->ocr = FIELD_DP32(sd->ocr, OCR, CARD_POWER_UP, 1); } static void sd_set_scr(SDState *sd) @@ -XXX,XX +XXX,XX @@ static bool sd_ocr_vmstate_needed(void *opaque) SDState *sd = opaque; /* Include the OCR state (and timer) if it is not yet powered up */ - return !(sd->ocr & OCR_POWER_UP); + return !FIELD_EX32(sd->ocr, OCR, CARD_POWER_UP); } static const VMStateDescription sd_ocr_vmstate = { @@ -XXX,XX +XXX,XX @@ static void sd_erase(SDState *sd) return; } - if (extract32(sd->ocr, OCR_CCS_BITN, 1)) { + if (FIELD_EX32(sd->ocr, OCR, CARD_CAPACITY)) { /* High capacity memory card: erase units are 512 byte blocks */ erase_start *= 512; erase_end *= 512; @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_app_command(SDState *sd, * UEFI, which sends an initial enquiry ACMD41, but * assumes that the card is in ready state as soon as it * sees the power up bit set. */ - if (!(sd->ocr & OCR_POWER_UP)) { + if (!FIELD_EX32(sd->ocr, OCR, CARD_POWER_UP)) { if ((req.arg & ACMD41_ENQUIRY_MASK) != 0) { timer_del(sd->ocr_power_timer); sd_ocr_powerup(sd); -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Don't set the high capacity bit by default as it will be set if required in the sd_set_csd() function. [based on a patch from Alistair Francis <alistair.francis@xilinx.com> and Peter Ogden <ogden@xilinx.com> from qemu/xilinx tag xilinx-v2015.4] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_ocr_powerup(void *opaque) /* card power-up OK */ sd->ocr = FIELD_DP32(sd->ocr, OCR, CARD_POWER_UP, 1); + + if (sd->size > 1 * G_BYTE) { + sd->ocr = FIELD_DP32(sd->ocr, OCR, CARD_CAPACITY, 1); + } } static void sd_set_scr(SDState *sd) @@ -XXX,XX +XXX,XX @@ static void sd_set_csd(SDState *sd, uint64_t size) sd->csd[13] = 0x40; sd->csd[14] = 0x00; sd->csd[15] = 0x00; - sd->ocr |= 1 << 30; /* High Capacity SD Memory Card */ } } -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_set_csd(SDState *sd, uint64_t size) sd->csd[13] = 0x20 | /* Max. write data block length */ ((HWBLOCK_SHIFT << 6) & 0xc0); sd->csd[14] = 0x00; /* File format group */ - sd->csd[15] = (sd_crc7(sd->csd, 15) << 1) | 1; } else { /* SDHC */ size /= 512 * 1024; size -= 1; @@ -XXX,XX +XXX,XX @@ static void sd_set_csd(SDState *sd, uint64_t size) sd->csd[12] = 0x0a; sd->csd[13] = 0x40; sd->csd[14] = 0x00; - sd->csd[15] = 0x00; } + sd->csd[15] = (sd_crc7(sd->csd, 15) << 1) | 1; } static void sd_set_rca(SDState *sd) -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> To comply with Spec v1.10 (and 2.00, 3.01): . TRAN_SPEED for current SD Memory Cards that field must be always 0_0110_010b (032h) which is equal to 25MHz - the mandatory maximum operating frequency of SD Memory Card. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-4-f4bug@amsat.org [PMM: fixed comment indent] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_set_csd(SDState *sd, uint64_t size) sd->csd[0] = 0x00; /* CSD structure */ sd->csd[1] = 0x26; /* Data read access-time-1 */ sd->csd[2] = 0x00; /* Data read access-time-2 */ - sd->csd[3] = 0x5a; /* Max. data transfer rate */ + sd->csd[3] = 0x32; /* Max. data transfer rate: 25 MHz */ sd->csd[4] = 0x5f; /* Card Command Classes */ sd->csd[5] = 0x50 | /* Max. read data block length */ HWBLOCK_SHIFT; -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_ocr_powerup(void *opaque) static void sd_set_scr(SDState *sd) { - sd->scr[0] = 0x00; /* SCR Structure */ - sd->scr[1] = 0x2f; /* SD Security Support */ - sd->scr[2] = 0x00; + sd->scr[0] = (0 << 4) /* SCR version 1.0 */ + | 0; /* Spec Versions 1.0 and 1.01 */ + sd->scr[1] = (2 << 4) /* SDSC Card (Security Version 1.01) */ + | 0b0101; /* 1-bit or 4-bit width bus modes */ + sd->scr[2] = 0x00; /* Extended Security is not supported. */ sd->scr[3] = 0x00; + /* reserved for manufacturer usage */ sd->scr[4] = 0x00; sd->scr[5] = 0x00; sd->scr[6] = 0x00; -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> This device does not model MMCA Specification previous to v4.2 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 33 --------------------------------- 1 file changed, 33 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, } break; - case 11: /* CMD11: READ_DAT_UNTIL_STOP */ - if (sd->spi) - goto bad_cmd; - switch (sd->state) { - case sd_transfer_state: - sd->state = sd_sendingdata_state; - sd->data_start = req.arg; - sd->data_offset = 0; - - if (sd->data_start + sd->blk_len > sd->size) - sd->card_status |= ADDRESS_ERROR; - return sd_r0; - - default: - break; - } - break; - case 12: /* CMD12: STOP_TRANSMISSION */ switch (sd->state) { case sd_sendingdata_state: @@ -XXX,XX +XXX,XX @@ uint8_t sd_read_data(SDState *sd) sd->state = sd_transfer_state; break; - case 11: /* CMD11: READ_DAT_UNTIL_STOP */ - if (sd->data_offset == 0) - BLK_READ_BLOCK(sd->data_start, io_len); - ret = sd->data[sd->data_offset ++]; - - if (sd->data_offset >= io_len) { - sd->data_start += io_len; - sd->data_offset = 0; - if (sd->data_start + io_len > sd->size) { - sd->card_status |= ADDRESS_ERROR; - break; - } - } - break; - case 13: /* ACMD13: SD_STATUS */ ret = sd->sd_status[sd->data_offset ++]; -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> the code is easier to review/refactor. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-7-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 38 +++++++++----------------------------- 1 file changed, 9 insertions(+), 29 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static int sd_req_crc_validate(SDRequest *req) { uint8_t buffer[5]; buffer[0] = 0x40 | req->cmd; - buffer[1] = (req->arg >> 24) & 0xff; - buffer[2] = (req->arg >> 16) & 0xff; - buffer[3] = (req->arg >> 8) & 0xff; - buffer[4] = (req->arg >> 0) & 0xff; + stl_be_p(&buffer[1], req->arg); return 0; return sd_crc7(buffer, 5) != req->crc; /* TODO */ } static void sd_response_r1_make(SDState *sd, uint8_t *response) { - uint32_t status = sd->card_status; + stl_be_p(response, sd->card_status); + /* Clear the "clear on read" status bits */ sd->card_status &= ~CARD_STATUS_C; - - response[0] = (status >> 24) & 0xff; - response[1] = (status >> 16) & 0xff; - response[2] = (status >> 8) & 0xff; - response[3] = (status >> 0) & 0xff; } static void sd_response_r3_make(SDState *sd, uint8_t *response) { - response[0] = (sd->ocr >> 24) & 0xff; - response[1] = (sd->ocr >> 16) & 0xff; - response[2] = (sd->ocr >> 8) & 0xff; - response[3] = (sd->ocr >> 0) & 0xff; + stl_be_p(response, sd->ocr); } static void sd_response_r6_make(SDState *sd, uint8_t *response) { - uint16_t arg; uint16_t status; - arg = sd->rca; status = ((sd->card_status >> 8) & 0xc000) | ((sd->card_status >> 6) & 0x2000) | (sd->card_status & 0x1fff); sd->card_status &= ~(CARD_STATUS_C & 0xc81fff); - - response[0] = (arg >> 8) & 0xff; - response[1] = arg & 0xff; - response[2] = (status >> 8) & 0xff; - response[3] = status & 0xff; + stw_be_p(response + 0, sd->rca); + stw_be_p(response + 2, status); } static void sd_response_r7_make(SDState *sd, uint8_t *response) { - response[0] = (sd->vhs >> 24) & 0xff; - response[1] = (sd->vhs >> 16) & 0xff; - response[2] = (sd->vhs >> 8) & 0xff; - response[3] = (sd->vhs >> 0) & 0xff; + stl_be_p(response, sd->vhs); } static inline uint64_t sd_addr_to_wpnum(uint64_t addr) @@ -XXX,XX +XXX,XX @@ static uint32_t sd_wpbits(SDState *sd, uint64_t addr) static void sd_function_switch(SDState *sd, uint32_t arg) { - int i, mode, new_func, crc; + int i, mode, new_func; mode = !!(arg & 0x80000000); sd->data[0] = 0x00; /* Maximum current consumption */ @@ -XXX,XX +XXX,XX @@ static void sd_function_switch(SDState *sd, uint32_t arg) sd->data[14 + (i >> 1)] = new_func << ((i * 4) & 4); } memset(&sd->data[17], 0, 47); - crc = sd_crc16(sd->data, 64); - sd->data[65] = crc >> 8; - sd->data[66] = crc & 0xff; + stw_be_p(sd->data + 65, sd_crc16(sd->data, 64)); } static inline bool sd_wp_addr(SDState *sd, uint64_t addr) -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> use the registerfields API to access the OCR register Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ //#define DEBUG_SD 1 -#define ACMD41_ENQUIRY_MASK 0x00ffffff - typedef enum { sd_r0 = 0, /* no response */ sd_r1, /* normal response command */ @@ -XXX,XX +XXX,XX @@ static uint16_t sd_crc16(void *message, size_t width) #define OCR_POWER_DELAY_NS 500000 /* 0.5ms */ +FIELD(OCR, VDD_VOLTAGE_WINDOW, 0, 24) +FIELD(OCR, VDD_VOLTAGE_WIN_LO, 0, 8) +FIELD(OCR, DUAL_VOLTAGE_CARD, 7, 1) +FIELD(OCR, VDD_VOLTAGE_WIN_HI, 8, 16) +FIELD(OCR, ACCEPT_SWITCH_1V8, 24, 1) /* Only UHS-I */ +FIELD(OCR, UHS_II_CARD, 29, 1) /* Only UHS-II */ FIELD(OCR, CARD_CAPACITY, 30, 1) /* 0:SDSC, 1:SDHC/SDXC */ FIELD(OCR, CARD_POWER_UP, 31, 1) +#define ACMD41_ENQUIRY_MASK 0x00ffffff +#define ACMD41_R3_MASK (R_OCR_VDD_VOLTAGE_WIN_HI_MASK \ + | R_OCR_ACCEPT_SWITCH_1V8_MASK \ + | R_OCR_UHS_II_CARD_MASK \ + | R_OCR_CARD_CAPACITY_MASK \ + | R_OCR_CARD_POWER_UP_MASK) + static void sd_set_ocr(SDState *sd) { - /* All voltages OK, Standard Capacity SD Memory Card, not yet powered up */ - sd->ocr = 0x00ffff00; + /* All voltages OK */ + sd->ocr = R_OCR_VDD_VOLTAGE_WIN_HI_MASK; } static void sd_ocr_powerup(void *opaque) @@ -XXX,XX +XXX,XX @@ static void sd_response_r1_make(SDState *sd, uint8_t *response) static void sd_response_r3_make(SDState *sd, uint8_t *response) { - stl_be_p(response, sd->ocr); + stl_be_p(response, sd->ocr & ACMD41_R3_MASK); } static void sd_response_r6_make(SDState *sd, uint8_t *response) -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-9-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 48 +++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 45 insertions(+), 3 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_set_rca(SDState *sd) sd->rca += 0x4567; } +FIELD(CSR, AKE_SEQ_ERROR, 3, 1) +FIELD(CSR, APP_CMD, 5, 1) +FIELD(CSR, FX_EVENT, 6, 1) +FIELD(CSR, READY_FOR_DATA, 8, 1) +FIELD(CSR, CURRENT_STATE, 9, 4) +FIELD(CSR, ERASE_RESET, 13, 1) +FIELD(CSR, CARD_ECC_DISABLED, 14, 1) +FIELD(CSR, WP_ERASE_SKIP, 15, 1) +FIELD(CSR, CSD_OVERWRITE, 16, 1) +FIELD(CSR, DEFERRED_RESPONSE, 17, 1) +FIELD(CSR, ERROR, 19, 1) +FIELD(CSR, CC_ERROR, 20, 1) +FIELD(CSR, CARD_ECC_FAILED, 21, 1) +FIELD(CSR, ILLEGAL_COMMAND, 22, 1) +FIELD(CSR, COM_CRC_ERROR, 23, 1) +FIELD(CSR, LOCK_UNLOCK_FAILED, 24, 1) +FIELD(CSR, CARD_IS_LOCKED, 25, 1) +FIELD(CSR, WP_VIOLATION, 26, 1) +FIELD(CSR, ERASE_PARAM, 27, 1) +FIELD(CSR, ERASE_SEQ_ERROR, 28, 1) +FIELD(CSR, BLOCK_LEN_ERROR, 29, 1) +FIELD(CSR, ADDRESS_ERROR, 30, 1) +FIELD(CSR, OUT_OF_RANGE, 31, 1) + /* Card status bits, split by clear condition: * A : According to the card current state * B : Always related to the previous command * C : Cleared by read */ -#define CARD_STATUS_A 0x02004100 -#define CARD_STATUS_B 0x00c01e00 -#define CARD_STATUS_C 0xfd39a028 +#define CARD_STATUS_A (R_CSR_READY_FOR_DATA_MASK \ + | R_CSR_CARD_ECC_DISABLED_MASK \ + | R_CSR_CARD_IS_LOCKED_MASK) +#define CARD_STATUS_B (R_CSR_CURRENT_STATE_MASK \ + | R_CSR_ILLEGAL_COMMAND_MASK \ + | R_CSR_COM_CRC_ERROR_MASK) +#define CARD_STATUS_C (R_CSR_AKE_SEQ_ERROR_MASK \ + | R_CSR_APP_CMD_MASK \ + | R_CSR_ERASE_RESET_MASK \ + | R_CSR_WP_ERASE_SKIP_MASK \ + | R_CSR_CSD_OVERWRITE_MASK \ + | R_CSR_ERROR_MASK \ + | R_CSR_CC_ERROR_MASK \ + | R_CSR_CARD_ECC_FAILED_MASK \ + | R_CSR_LOCK_UNLOCK_FAILED_MASK \ + | R_CSR_WP_VIOLATION_MASK \ + | R_CSR_ERASE_PARAM_MASK \ + | R_CSR_ERASE_SEQ_ERROR_MASK \ + | R_CSR_BLOCK_LEN_ERROR_MASK \ + | R_CSR_ADDRESS_ERROR_MASK \ + | R_CSR_OUT_OF_RANGE_MASK) static void sd_set_cardstatus(SDState *sd) { -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Linux uses it to poll the bus before polling for a card. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-10-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, } break; - case 52: - case 53: - /* CMD52, CMD53: reserved for SDIO cards + case 52 ... 54: + /* CMD52, CMD53, CMD54: reserved for SDIO cards * (see the SDIO Simplified Specification V2.0) * Handle as illegal command but do not complain * on stderr, as some OSes may use these in their -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> returning sd_illegal, since they are not implemented. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-11-f4bug@amsat.org [PMM: tweak multiline comment format] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_app_command(SDState *sd, } break; + case 18: /* Reserved for SD security applications */ + case 25: + case 26: + case 38: + case 43 ... 49: + /* Refer to the "SD Specifications Part3 Security Specification" for + * information about the SD Security Features. + */ + qemu_log_mask(LOG_UNIMP, "SD: CMD%i Security not implemented\n", + req.cmd); + return sd_illegal; + default: /* Fall back to standard commands. */ return sd_normal_command(sd, req); -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Suggested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-12-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, /* Block write commands (Class 4) */ case 24: /* CMD24: WRITE_SINGLE_BLOCK */ - if (sd->spi) - goto unimplemented_cmd; + if (sd->spi) { + goto unimplemented_spi_cmd; + } switch (sd->state) { case sd_transfer_state: /* Writing in SPI mode not implemented. */ @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, break; case 25: /* CMD25: WRITE_MULTIPLE_BLOCK */ - if (sd->spi) - goto unimplemented_cmd; + if (sd->spi) { + goto unimplemented_spi_cmd; + } switch (sd->state) { case sd_transfer_state: /* Writing in SPI mode not implemented. */ @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, break; case 27: /* CMD27: PROGRAM_CSD */ - if (sd->spi) - goto unimplemented_cmd; + if (sd->spi) { + goto unimplemented_spi_cmd; + } switch (sd->state) { case sd_transfer_state: sd->state = sd_receivingdata_state; @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, /* Lock card commands (Class 7) */ case 42: /* CMD42: LOCK_UNLOCK */ - if (sd->spi) - goto unimplemented_cmd; + if (sd->spi) { + goto unimplemented_spi_cmd; + } switch (sd->state) { case sd_transfer_state: sd->state = sd_receivingdata_state; @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, qemu_log_mask(LOG_GUEST_ERROR, "SD: Unknown CMD%i\n", req.cmd); return sd_illegal; - unimplemented_cmd: + unimplemented_spi_cmd: /* Commands that are recognised but not yet implemented in SPI mode. */ qemu_log_mask(LOG_UNIMP, "SD: CMD%i not implemented in SPI mode\n", req.cmd); -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-13-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, /* Application specific commands (Class 8) */ case 55: /* CMD55: APP_CMD */ - if (sd->rca != rca) - return sd_r0; - + if (!sd->spi) { + if (sd->rca != rca) { + return sd_r0; + } + } sd->expecting_acmd = true; sd->card_status |= APP_CMD; return sd_r1; @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, } break; + case 58: /* CMD58: READ_OCR (SPI) */ + if (!sd->spi) { + goto bad_cmd; + } + return sd_r3; + + case 59: /* CMD59: CRC_ON_OFF (SPI) */ + if (!sd->spi) { + goto bad_cmd; + } + goto unimplemented_spi_cmd; + default: bad_cmd: qemu_log_mask(LOG_GUEST_ERROR, "SD: Unknown CMD%i\n", req.cmd); @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_app_command(SDState *sd, sd->card_status |= APP_CMD; switch (req.cmd) { case 6: /* ACMD6: SET_BUS_WIDTH */ + if (sd->spi) { + goto unimplemented_spi_cmd; + } switch (sd->state) { case sd_transfer_state: sd->sd_status[0] &= 0x3f; @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_app_command(SDState *sd, default: /* Fall back to standard commands. */ return sd_normal_command(sd, req); + + unimplemented_spi_cmd: + /* Commands that are recognised but not yet implemented in SPI mode. */ + qemu_log_mask(LOG_UNIMP, "SD: CMD%i not implemented in SPI mode\n", + req.cmd); + return sd_illegal; } qemu_log_mask(LOG_GUEST_ERROR, "SD: ACMD%i in a wrong state\n", req.cmd); -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-14-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, /* Application specific commands (Class 8) */ case 55: /* CMD55: APP_CMD */ + switch (sd->state) { + case sd_ready_state: + case sd_identification_state: + case sd_inactive_state: + return sd_illegal; + default: + break; + } if (!sd->spi) { if (sd->rca != rca) { return sd_r0; -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-15-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, case sd_identification_state: case sd_inactive_state: return sd_illegal; + case sd_idle_state: + if (rca) { + qemu_log_mask(LOG_GUEST_ERROR, + "SD: illegal RCA 0x%04x for APP_CMD\n", req.cmd); + } default: break; } -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> replace switch(single case) -> if() Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-16-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, case 8: /* CMD8: SEND_IF_COND */ /* Physical Layer Specification Version 2.00 command */ - switch (sd->state) { - case sd_idle_state: - sd->vhs = 0; - - /* No response if not exactly one VHS bit is set. */ - if (!(req.arg >> 8) || (req.arg >> (ctz32(req.arg & ~0xff) + 1))) { - return sd->spi ? sd_r7 : sd_r0; - } - - /* Accept. */ - sd->vhs = req.arg; - return sd_r7; - - default: + if (sd->state != sd_idle_state) { break; } - break; + sd->vhs = 0; + + /* No response if not exactly one VHS bit is set. */ + if (!(req.arg >> 8) || (req.arg >> (ctz32(req.arg & ~0xff) + 1))) { + return sd->spi ? sd_r7 : sd_r0; + } + + /* Accept. */ + sd->vhs = req.arg; + return sd_r7; case 9: /* CMD9: SEND_CSD */ switch (sd->state) { -- 2.16.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> replace switch(single case) -> if() Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-17-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 56 ++++++++++++++++++++++++++------------------------------ 1 file changed, 26 insertions(+), 30 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_app_command(SDState *sd, sd->state = sd_transfer_state; return sd_r1; } - switch (sd->state) { - case sd_idle_state: - /* If it's the first ACMD41 since reset, we need to decide - * whether to power up. If this is not an enquiry ACMD41, - * we immediately report power on and proceed below to the - * ready state, but if it is, we set a timer to model a - * delay for power up. This works around a bug in EDK2 - * UEFI, which sends an initial enquiry ACMD41, but - * assumes that the card is in ready state as soon as it - * sees the power up bit set. */ - if (!FIELD_EX32(sd->ocr, OCR, CARD_POWER_UP)) { - if ((req.arg & ACMD41_ENQUIRY_MASK) != 0) { - timer_del(sd->ocr_power_timer); - sd_ocr_powerup(sd); - } else { - trace_sdcard_inquiry_cmd41(); - if (!timer_pending(sd->ocr_power_timer)) { - timer_mod_ns(sd->ocr_power_timer, - (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - + OCR_POWER_DELAY_NS)); - } + if (sd->state != sd_idle_state) { + break; + } + /* If it's the first ACMD41 since reset, we need to decide + * whether to power up. If this is not an enquiry ACMD41, + * we immediately report power on and proceed below to the + * ready state, but if it is, we set a timer to model a + * delay for power up. This works around a bug in EDK2 + * UEFI, which sends an initial enquiry ACMD41, but + * assumes that the card is in ready state as soon as it + * sees the power up bit set. */ + if (!FIELD_EX32(sd->ocr, OCR, CARD_POWER_UP)) { + if ((req.arg & ACMD41_ENQUIRY_MASK) != 0) { + timer_del(sd->ocr_power_timer); + sd_ocr_powerup(sd); + } else { + trace_sdcard_inquiry_cmd41(); + if (!timer_pending(sd->ocr_power_timer)) { + timer_mod_ns(sd->ocr_power_timer, + (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + + OCR_POWER_DELAY_NS)); } } + } + if (FIELD_EX32(sd->ocr & req.arg, OCR, VDD_VOLTAGE_WINDOW)) { /* We accept any voltage. 10000 V is nothing. * * Once we're powered up, we advance straight to ready state * unless it's an enquiry ACMD41 (bits 23:0 == 0). */ - if (req.arg & ACMD41_ENQUIRY_MASK) { - sd->state = sd_ready_state; - } - - return sd_r3; - - default: - break; + sd->state = sd_ready_state; } - break; + + return sd_r3; case 42: /* ACMD42: SET_CLR_CARD_DETECT */ switch (sd->state) { -- 2.16.1 Hi; here's another arm pullreq; main parts here are the new i.MX 8MM EVK board, and a lot of refactoring. thanks -- PMM The following changes since commit aa15257174da180c6a8a9d58f87319cfe61c5520: Merge tag 'pbouvier/pr/plugins-20260424' of https://gitlab.com/p-b-o/qemu into staging (2026-04-25 10:22:04 -0400) are available in the Git repository at: https://gitlab.com/pm215/qemu.git tags/pull-target-arm-20260427 for you to fetch changes up to 4575da5ecb7a27544aa6da1f78e700e8100ceaea: target/arm: report register in WFIT syndromes (2026-04-27 11:46:34 +0100) ---------------------------------------------------------------- target-arm queue: docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board target/arm: Build M-profile helper code once only hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header target/arm: Allow 'aarch64=off' to be set for TCG CPUs target/arm: Allow some sysregs to not have to be an exact match for migration hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices hw/arm/fsl-imx6ul: Implement LCDIF display device target/arm: Refactor syndrome value code to use registerfields target/arm: Report the register in WFxT syndromes ---------------------------------------------------------------- Alex Bennée (24): docs/system: add FEAT_AA32 and FEAT_AA64 to emulation list target/arm: migrate basic syndrome helpers to registerfields target/arm: migrate system/cp trap syndromes to registerfields target/arm: migrate FP/SIMD trap syndromes to registerfields target/arm: migrate eret trap syndromes to registerfields target/arm: migrate SME trap syndromes to registerfields target/arm: migrate PAC trap syndromes to registerfields target/arm: migrate BTI trap syndromes to registerfields target/arm: migrate BXJ trap syndromes to registerfields target/arm: migrate Granule Protection traps to registerfields target/arm: migrate fault syndromes to registerfields target/arm: migrate debug syndromes to registerfields target/arm: migrate wfx syndromes to registerfields target/arm: migrate gcs syndromes to registerfields target/arm: migrate memory op syndromes to registerfields target/arm: migrate check_hcr_el2_trap to use syndrome helper target/arm: use syndrome helpers in arm_cpu_do_interrupt_aarch32_hyp target/arm: use syndrome helpers to set SAME_EL EC bit target/arm: make whpx use syndrome helpers for decode target/arm: make hvf use syndrome helpers for decode target/arm: use syndrome helpers in merge_syn_data_abort target/arm: use syndrome helpers to query VNCR bit target/arm: remove old syndrome defines target/arm: report register in WFIT syndromes Eric Auger (7): target/arm/cpu: Introduce the infrastructure for cpreg migration tolerances target/arm/machine: Handle ToleranceNotOnBothEnds migration tolerances target/arm/machine: Handle ToleranceOnlySrcTestValue migration tolerance target/arm/cpu64: Mitigate migration failures due to spurious TCR_EL1, PIRE0_EL1 and PIR_EL1 target/arm/cpu64: Define cpreg migration tolerance for KVM_REG_ARM_VENDOR_HYP_BMAP_2 target/arm/helper: Define cpreg migration tolerance for DGBDTR_EL0 Revert "target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat" Gaurav Sharma (15): hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board hw/misc/imx8mp_analog: Add property to analog device hw/arm/fsl-imx8mm: Add Analog device IP to iMX8MM SOC hw/arm/fsl-imx8mm: Add Clock Control Module IP to iMX8MM hw/arm/fsl-imx8mm: Implemented support for SNVS hw/arm/fsl-imx8mm: Adding support for USDHC storage controllers hw/arm/fsl-imx8mm: Add PCIe support hw/arm/fsl-imx8mm: Add GPIO controllers hw/arm/fsl-imx8mm: Adding support for I2C emulation hw/arm/fsl-imx8mm: Adding support for SPI controller hw/arm/fsl-imx8mm: Adding support for Watchdog Timers hw/arm/fsl-imx8mm: Adding support for General Purpose Timers hw/arm/fsl-imx8mm: Adding support for ENET ethernet controller hw/arm/fsl-imx8mm: Adding support for USB controller hw/arm/fsl-imx8mm: Adding functional testing of iMX8MM emulation Osama Abdelkader (1): hw/arm/raspi4b: NOP all DTB nodes when removing unimplemented devices Peter Maydell (4): hw: Move ARM_SYSCTL_GPIO definitions to arm sysctl specific header target/arm: Clear AArch64 ID regs from ARMISARegisters if AArch64 disabled target/arm: Allow 'aarch64=off' to be set for TCG CPUs tests/functional/aarch64: Add basic test of TCG aarch64=off Philippe Mathieu-Daudé (9): target/arm: Ignore endianness when setting MTE tags target/arm: Explode MO_TExx -> MO_TE | MO_xx target/arm: Hoist MO_TE into mve_advance_vpt() target/arm: Hoist MO_TE into MVE DO_VSTR() macro target/arm: Introduce mo_endian() helper target/arm: Replace MO_TE -> mo_endian() for MVE helpers target/arm: Compile mve_helper.c once target/arm: Replace MO_TE -> mo_endian() for Cortex-M helpers target/arm: Compile m_helper.c once Thomas Huth (1): hw/arm: Remove hw_error() for the unimplemented CM_LMBUSCNT register Yucai Liu (2): hw/display: Add i.MX6UL LCDIF device model hw/arm/fsl-imx6ul: Wire in the LCDIF device model MAINTAINERS | 16 +- docs/system/arm/cpu-features.rst | 10 +- docs/system/arm/emulation.rst | 2 + docs/system/arm/{imx8mp-evk.rst => imx8m.rst} | 49 +- docs/system/target-arm.rst | 2 +- hw/arm/Kconfig | 25 + hw/arm/fsl-imx6ul.c | 12 +- hw/arm/fsl-imx8mm.c | 704 ++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 130 ++++ hw/arm/integratorcp.c | 3 - hw/arm/meson.build | 2 + hw/arm/raspi4b.c | 10 +- hw/arm/realview.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 1 - hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++ hw/display/meson.build | 1 + hw/misc/arm_sysctl.c | 2 +- hw/misc/imx8mp_analog.c | 12 +- hw/timer/imx_gpt.c | 26 + hw/vmapple/vmapple.c | 1 - include/hw/arm/fsl-imx6ul.h | 4 +- include/hw/arm/fsl-imx8mm.h | 242 ++++++++ include/hw/arm/primecell.h | 12 - include/hw/display/imx6ul_lcdif.h | 37 ++ include/hw/misc/arm_sysctl.h | 16 + include/hw/misc/imx8mp_analog.h | 3 + include/hw/timer/imx_gpt.h | 2 + target/arm/cpu-features.h | 5 + target/arm/cpu.c | 153 ++++- target/arm/cpu.h | 4 +- target/arm/cpu64.c | 39 ++ target/arm/debug_helper.c | 29 - target/arm/helper.c | 27 +- target/arm/hvf/hvf.c | 14 +- target/arm/internals.h | 60 ++ target/arm/machine.c | 33 +- target/arm/syndrome.h | 595 ++++++++++++++---- target/arm/tcg/debug.c | 2 +- target/arm/tcg/helper-a64.c | 2 +- target/arm/tcg/helper-defs.h | 2 +- target/arm/tcg/m_helper.c | 8 +- target/arm/tcg/meson.build | 6 +- target/arm/tcg/mve_helper.c | 102 ++-- target/arm/tcg/op_helper.c | 7 +- target/arm/tcg/tlb_helper.c | 6 +- target/arm/tcg/translate-a64.c | 2 +- target/arm/tcg/vfp_helper.c | 5 +- target/arm/trace-events | 2 + target/arm/whpx/whpx-all.c | 13 +- tests/functional/aarch64/meson.build | 3 + tests/functional/aarch64/test_imx8mm_evk.py | 69 +++ tests/functional/aarch64/test_virt_aarch64_off.py | 37 ++ tests/qtest/arm-cpu-features.c | 8 +- 55 files changed, 2743 insertions(+), 275 deletions(-) rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%) create mode 100644 hw/arm/fsl-imx8mm.c create mode 100644 hw/arm/imx8mm-evk.c create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/arm/fsl-imx8mm.h delete mode 100644 include/hw/arm/primecell.h create mode 100644 include/hw/display/imx6ul_lcdif.h create mode 100644 include/hw/misc/arm_sysctl.h create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py From: Alex Bennée <alex.bennee@linaro.org> This is just a documentation tweak as we already support both. FEAT_AA32 implies FEAT_AA32EL0. FEAT_AA64 implies FEAT_AA64EL[0123]. This is however useful if you are using emulation.rst as a source of truth of what QEMU emulates and when cross checking with Features.json from Arm. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260421093506.616307-1-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 2 ++ 1 file changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ QEMU's TCG emulation includes support for the Armv5, Armv6, Armv7, Armv8 and Armv9 versions of the A-profile architecture. It also has support for the following architecture extensions: +- FEAT_AA32 (PE Support for AArch32) - FEAT_AA32BF16 (AArch32 BFloat16 instructions) - FEAT_AA32EL0 (Support for AArch32 at EL0) - FEAT_AA32EL1 (Support for AArch32 at EL1) @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_AA32EL3 (Support for AArch32 at EL3) - FEAT_AA32HPD (AArch32 hierarchical permission disables) - FEAT_AA32I8MM (AArch32 Int8 matrix multiplication instructions) +- FEAT_AA64 (PE uses AArch64 after last reboot) - FEAT_AA64EL0 (Support for AArch64 at EL0) - FEAT_AA64EL1 (Support for AArch64 at EL1) - FEAT_AA64EL2 (Support for AArch64 at EL2) -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Implemented CPUs, RAM, UARTs and Interrupt Controller Other peripherals are represented as TYPE_UNIMPLEMENTED_DEVICE Complete memory map of the SoC is provided. Set default RAM size to 2GB and default CPU count to 4 to match the real i.MX8MM EVK hardware configuration. Documentation is shared with imx8mp-evk to avoid duplication. Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> [PMM: fixed over-long lines in doc] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 11 +- docs/system/arm/{imx8mp-evk.rst => imx8m.rst} | 49 ++- docs/system/target-arm.rst | 2 +- hw/arm/Kconfig | 12 + hw/arm/fsl-imx8mm.c | 377 ++++++++++++++++++ hw/arm/imx8mm-evk.c | 112 ++++++ hw/arm/meson.build | 2 + include/hw/arm/fsl-imx8mm.h | 158 ++++++++ 8 files changed, 709 insertions(+), 14 deletions(-) rename docs/system/arm/{imx8mp-evk.rst => imx8m.rst} (58%) create mode 100644 hw/arm/fsl-imx8mm.c create mode 100644 hw/arm/imx8mm-evk.c create mode 100644 include/hw/arm/fsl-imx8mm.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/pci-host/designware.c F: include/hw/pci-host/designware.h F: docs/system/arm/mcimx7d-sabre.rst +MCIMX8MM-EVK / iMX8MM +M: Gaurav Sharma <gaurav.sharma_7@nxp.com> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/fsl-imx8mm.c +F: hw/arm/imx8mm-evk.c +F: include/hw/arm/fsl-imx8mm.h +F: docs/system/arm/imx8m.rst + MCIMX8MP-EVK / i.MX8MP M: Bernhard Beschow <shentey@gmail.com> L: qemu-arm@nongnu.org @@ -XXX,XX +XXX,XX @@ F: hw/rtc/rs5c372.c F: include/hw/arm/fsl-imx8mp.h F: include/hw/misc/imx8mp_*.h F: include/hw/pci-host/fsl_imx8m_phy.h -F: docs/system/arm/imx8mp-evk.rst +F: docs/system/arm/imx8m.rst F: tests/functional/aarch64/test_imx8mp_evk.py F: tests/qtest/rs5c372-test.c diff --git a/docs/system/arm/imx8mp-evk.rst b/docs/system/arm/imx8m.rst similarity index 58% rename from docs/system/arm/imx8mp-evk.rst rename to docs/system/arm/imx8m.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/imx8mp-evk.rst +++ b/docs/system/arm/imx8m.rst @@ -XXX,XX +XXX,XX @@ -NXP i.MX 8M Plus Evaluation Kit (``imx8mp-evk``) -================================================ +NXP i.MX 8M Plus and i.MX 8M Mini Evaluation Kits (``imx8mp-evk``, ``imx8mm-evk``) +================================================================================== -The ``imx8mp-evk`` machine models the i.MX 8M Plus Evaluation Kit, based on an -i.MX 8M Plus SoC. +The ``imx8mp-evk`` and ``imx8mm-evk`` machine models the i.MX 8M Plus +and i.MX 8M Mini Evaluation Kits, based on i.MX 8M Plus and i.MX8M +Mini SoCs. Supported devices ----------------- -The ``imx8mp-evk`` machine implements the following devices: +The ``imx8mp-evk`` and ``imx8mm-evk`` machines implement the +following devices: * Up to 4 Cortex-A53 cores * Generic Interrupt Controller (GICv3) @@ -XXX,XX +XXX,XX @@ The ``imx8mp-evk`` machine implements the following devices: Boot options ------------ -The ``imx8mp-evk`` machine can start a Linux kernel directly using the standard -``-kernel`` functionality. +The ``imx8mp-evk`` and ``imx8mm-evk`` machines can start a Linux +kernel directly using the standard ``-kernel`` functionality. Direct Linux Kernel Boot '''''''''''''''''''''''' @@ -XXX,XX +XXX,XX @@ is to generate an image with Buildroot. Version 2024.11.1 is tested at the time of writing and involves two steps. First run the following commands in the toplevel directory of the Buildroot source tree: +For i.MX 8M Plus EVK: + .. code-block:: bash $ make freescale_imx8mpevk_defconfig $ make +For i.MX 8M Mini EVK: + +.. code-block:: bash + + $ make freescale_imx8mmevk_defconfig + $ make + Once finished successfully there is an ``output/image`` subfolder. Navigate into it and resize the SD card image to a power of two: @@ -XXX,XX +XXX,XX @@ it and resize the SD card image to a power of two: Now that everything is prepared the machine can be started as follows: +For i.MX 8M Plus EVK: + .. code-block:: bash $ qemu-system-aarch64 -M imx8mp-evk \ @@ -XXX,XX +XXX,XX @@ Now that everything is prepared the machine can be started as follows: -append "root=/dev/mmcblk2p2" \ -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2 +For i.MX 8M Mini EVK: + +.. code-block:: bash + + $ qemu-system-aarch64 -M imx8mm-evk -smp 4 -m 2G \ + -display none -serial null -serial stdio \ + -kernel Image \ + -dtb imx8mm-evk.dtb \ + -append "root=/dev/mmcblk2p2" \ + -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2 KVM Acceleration ---------------- @@ -XXX,XX +XXX,XX @@ To enable hardware-assisted acceleration via KVM, append ``-accel kvm`` to the command line. While this speeds up performance significantly, be aware of the following limitations: -* The ``imx8mp-evk`` machine is not included under the "virtualization use case" - of :doc:`QEMU's security policy </system/security>`. This means that you - should not trust that it can contain malicious guests, whether it is run - using TCG or KVM. If you don't trust your guests and you're relying on QEMU to - be the security boundary, you want to choose another machine such as ``virt``. +* The ``imx8mp-evk`` and ``imx8mm-evk`` machines are not included + under the "virtualization use case" of :doc:`QEMU's security + policy </system/security>`. This means that you should not trust that + it can contain malicious guests, whether it is run using TCG or KVM. + If you don't trust your guests and you're relying on QEMU to be the + security boundary, you want to choose another machine such as + ``virt``. * Rather than Cortex-A53 CPUs, the same CPU type as the host's will be used. This is a limitation of KVM and may not work with guests with a tight dependency on Cortex-A53. diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ Board-specific documentation arm/imx25-pdk arm/mcimx6ul-evk arm/mcimx7d-sabre - arm/imx8mp-evk + arm/imx8m arm/orangepi arm/raspi arm/collie diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK depends on TCG select FSL_IMX8MP +config FSL_IMX8MM + bool + select ARM_GIC + select IMX + +config FSL_IMX8MM_EVK + bool + default y + depends on AARCH64 + depends on TCG + select FSL_IMX8MM + config ARM_SMMUV3_ACCEL bool depends on ARM_SMMUV3 diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ +/* + * i.MX 8MM SoC Implementation + * + * Based on hw/arm/fsl-imx6.c + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * iMX8MM Reference Manual - https://www.nxp.com/products/i.MX8MMINI -> Documentation + */ + +#include "qemu/osdep.h" +#include "system/address-spaces.h" +#include "hw/arm/bsa.h" +#include "hw/arm/fsl-imx8mm.h" +#include "hw/misc/unimp.h" +#include "hw/core/boards.h" +#include "system/kvm.h" +#include "system/system.h" +#include "target/arm/cpu.h" +#include "target/arm/cpu-qom.h" +#include "target/arm/kvm_arm.h" +#include "qapi/error.h" +#include "qobject/qlist.h" + +static const struct { + hwaddr addr; + size_t size; + const char *name; +} fsl_imx8mm_memmap[] = { + [FSL_IMX8MM_RAM] = { FSL_IMX8MM_RAM_START, FSL_IMX8MM_RAM_SIZE_MAX, "ram" }, + [FSL_IMX8MM_DDR_PHY_BROADCAST] = { 0x3dc00000, 4 * MiB, "ddr_phy_broadcast" }, + [FSL_IMX8MM_DDR_PERF_MON] = { 0x3d800000, 4 * MiB, "ddr_perf_mon" }, + [FSL_IMX8MM_DDR_CTL] = { 0x3d400000, 4 * MiB, "ddr_ctl" }, + [FSL_IMX8MM_DDR_PHY] = { 0x3c000000, 16 * MiB, "ddr_phy" }, + [FSL_IMX8MM_GIC_DIST] = { 0x38800000, 512 * KiB, "gic_dist" }, + [FSL_IMX8MM_GIC_REDIST] = { 0x38880000, 512 * KiB, "gic_redist" }, + [FSL_IMX8MM_VPU] = { 0x38340000, 2 * MiB, "vpu" }, + [FSL_IMX8MM_VPU_BLK_CTRL] = { 0x38330000, 2 * MiB, "vpu_blk_ctrl" }, + [FSL_IMX8MM_VPU_G2_DECODER] = { 0x38310000, 1 * MiB, "vpu_g2_decoder" }, + [FSL_IMX8MM_VPU_G1_DECODER] = { 0x38300000, 1 * MiB, "vpu_g1_decoder" }, + [FSL_IMX8MM_USB2_OTG] = { 0x32e50200, 0x200, "usb2_otg" }, + [FSL_IMX8MM_USB2] = { 0x32e50000, 0x200, "usb2" }, + [FSL_IMX8MM_USB1_OTG] = { 0x32e40200, 0x200, "usb1_otg" }, + [FSL_IMX8MM_USB1] = { 0x32e40000, 0x200, "usb1" }, + [FSL_IMX8MM_GPU2D] = { 0x38000000, 64 * KiB, "gpu2d" }, + [FSL_IMX8MM_QSPI1_RX_BUFFER] = { 0x34000000, 32 * MiB, "qspi1_rx_buffer" }, + [FSL_IMX8MM_PCIE1] = { 0x33800000, 4 * MiB, "pcie1" }, + [FSL_IMX8MM_QSPI1_TX_BUFFER] = { 0x33008000, 32 * KiB, "qspi1_tx_buffer" }, + [FSL_IMX8MM_APBH_DMA] = { 0x33000000, 32 * KiB, "apbh_dma" }, + + /* AIPS-4 Begin */ + [FSL_IMX8MM_TZASC] = { 0x32f80000, 64 * KiB, "tzasc" }, + [FSL_IMX8MM_PCIE_PHY1] = { 0x32f00000, 64 * KiB, "pcie_phy1" }, + [FSL_IMX8MM_MEDIA_BLK_CTL] = { 0x32e28000, 256, "media_blk_ctl" }, + [FSL_IMX8MM_LCDIF] = { 0x32e00000, 64 * KiB, "lcdif" }, + [FSL_IMX8MM_MIPI_DSI] = { 0x32e10000, 64 * KiB, "mipi_dsi" }, + [FSL_IMX8MM_MIPI_CSI] = { 0x32e30000, 64 * KiB, "mipi_csi" }, + [FSL_IMX8MM_AIPS4_CONFIGURATION] = { 0x32df0000, 64 * KiB, "aips4_configuration" }, + /* AIPS-4 End */ + + [FSL_IMX8MM_INTERCONNECT] = { 0x32700000, 1 * MiB, "interconnect" }, + + /* AIPS-3 Begin */ + [FSL_IMX8MM_ENET1] = { 0x30be0000, 64 * KiB, "enet1" }, + [FSL_IMX8MM_SDMA1] = { 0x30bd0000, 64 * KiB, "sdma1" }, + [FSL_IMX8MM_QSPI] = { 0x30bb0000, 64 * KiB, "qspi" }, + [FSL_IMX8MM_USDHC3] = { 0x30b60000, 64 * KiB, "usdhc3" }, + [FSL_IMX8MM_USDHC2] = { 0x30b50000, 64 * KiB, "usdhc2" }, + [FSL_IMX8MM_USDHC1] = { 0x30b40000, 64 * KiB, "usdhc1" }, + [FSL_IMX8MM_SEMAPHORE_HS] = { 0x30ac0000, 64 * KiB, "semaphore_hs" }, + [FSL_IMX8MM_MU_B] = { 0x30ab0000, 64 * KiB, "mu_b" }, + [FSL_IMX8MM_MU_A] = { 0x30aa0000, 64 * KiB, "mu_a" }, + [FSL_IMX8MM_UART4] = { 0x30a60000, 64 * KiB, "uart4" }, + [FSL_IMX8MM_I2C4] = { 0x30a50000, 64 * KiB, "i2c4" }, + [FSL_IMX8MM_I2C3] = { 0x30a40000, 64 * KiB, "i2c3" }, + [FSL_IMX8MM_I2C2] = { 0x30a30000, 64 * KiB, "i2c2" }, + [FSL_IMX8MM_I2C1] = { 0x30a20000, 64 * KiB, "i2c1" }, + [FSL_IMX8MM_AIPS3_CONFIGURATION] = { 0x309f0000, 64 * KiB, "aips3_configuration" }, + [FSL_IMX8MM_CAAM] = { 0x30900000, 256 * KiB, "caam" }, + [FSL_IMX8MM_SPBA1] = { 0x308f0000, 64 * KiB, "spba1" }, + [FSL_IMX8MM_UART2] = { 0x30890000, 64 * KiB, "uart2" }, + [FSL_IMX8MM_UART3] = { 0x30880000, 64 * KiB, "uart3" }, + [FSL_IMX8MM_UART1] = { 0x30860000, 64 * KiB, "uart1" }, + [FSL_IMX8MM_ECSPI3] = { 0x30840000, 64 * KiB, "ecspi3" }, + [FSL_IMX8MM_ECSPI2] = { 0x30830000, 64 * KiB, "ecspi2" }, + [FSL_IMX8MM_ECSPI1] = { 0x30820000, 64 * KiB, "ecspi1" }, + /* AIPS-3 End */ + + /* AIPS-2 Begin */ + [FSL_IMX8MM_QOSC] = { 0x307f0000, 64 * KiB, "qosc" }, + [FSL_IMX8MM_PERFMON2] = { 0x307d0000, 64 * KiB, "perfmon2" }, + [FSL_IMX8MM_PERFMON1] = { 0x307c0000, 64 * KiB, "perfmon1" }, + [FSL_IMX8MM_GPT4] = { 0x30700000, 64 * KiB, "gpt4" }, + [FSL_IMX8MM_GPT5] = { 0x306f0000, 64 * KiB, "gpt5" }, + [FSL_IMX8MM_GPT6] = { 0x306e0000, 64 * KiB, "gpt6" }, + [FSL_IMX8MM_SYSCNT_CTRL] = { 0x306c0000, 64 * KiB, "syscnt_ctrl" }, + [FSL_IMX8MM_SYSCNT_CMP] = { 0x306b0000, 64 * KiB, "syscnt_cmp" }, + [FSL_IMX8MM_SYSCNT_RD] = { 0x306a0000, 64 * KiB, "syscnt_rd" }, + [FSL_IMX8MM_PWM4] = { 0x30690000, 64 * KiB, "pwm4" }, + [FSL_IMX8MM_PWM3] = { 0x30680000, 64 * KiB, "pwm3" }, + [FSL_IMX8MM_PWM2] = { 0x30670000, 64 * KiB, "pwm2" }, + [FSL_IMX8MM_PWM1] = { 0x30660000, 64 * KiB, "pwm1" }, + [FSL_IMX8MM_AIPS2_CONFIGURATION] = { 0x305f0000, 64 * KiB, "aips2_configuration" }, + /* AIPS-2 End */ + + /* AIPS-1 Begin */ + [FSL_IMX8MM_CSU] = { 0x303e0000, 64 * KiB, "csu" }, + [FSL_IMX8MM_RDC] = { 0x303d0000, 64 * KiB, "rdc" }, + [FSL_IMX8MM_SEMAPHORE2] = { 0x303c0000, 64 * KiB, "semaphore2" }, + [FSL_IMX8MM_SEMAPHORE1] = { 0x303b0000, 64 * KiB, "semaphore1" }, + [FSL_IMX8MM_GPC] = { 0x303a0000, 64 * KiB, "gpc" }, + [FSL_IMX8MM_SRC] = { 0x30390000, 64 * KiB, "src" }, + [FSL_IMX8MM_CCM] = { 0x30380000, 64 * KiB, "ccm" }, + [FSL_IMX8MM_SNVS_HP] = { 0x30370000, 64 * KiB, "snvs_hp" }, + [FSL_IMX8MM_ANA_PLL] = { 0x30360000, 64 * KiB, "ana_pll" }, + [FSL_IMX8MM_OCOTP_CTRL] = { 0x30350000, 64 * KiB, "ocotp_ctrl" }, + [FSL_IMX8MM_IOMUXC_GPR] = { 0x30340000, 64 * KiB, "iomuxc_gpr" }, + [FSL_IMX8MM_IOMUXC] = { 0x30330000, 64 * KiB, "iomuxc" }, + [FSL_IMX8MM_GPT3] = { 0x302f0000, 64 * KiB, "gpt3" }, + [FSL_IMX8MM_GPT2] = { 0x302e0000, 64 * KiB, "gpt2" }, + [FSL_IMX8MM_GPT1] = { 0x302d0000, 64 * KiB, "gpt1" }, + [FSL_IMX8MM_SDMA2] = { 0x302c0000, 64 * KiB, "sdma2" }, + [FSL_IMX8MM_SDMA3] = { 0x302b0000, 64 * KiB, "sdma3" }, + [FSL_IMX8MM_WDOG3] = { 0x302a0000, 64 * KiB, "wdog3" }, + [FSL_IMX8MM_WDOG2] = { 0x30290000, 64 * KiB, "wdog2" }, + [FSL_IMX8MM_WDOG1] = { 0x30280000, 64 * KiB, "wdog1" }, + [FSL_IMX8MM_ANA_OSC] = { 0x30270000, 64 * KiB, "ana_osc" }, + [FSL_IMX8MM_ANA_TSENSOR] = { 0x30260000, 64 * KiB, "ana_tsensor" }, + [FSL_IMX8MM_GPIO5] = { 0x30240000, 64 * KiB, "gpio5" }, + [FSL_IMX8MM_GPIO4] = { 0x30230000, 64 * KiB, "gpio4" }, + [FSL_IMX8MM_GPIO3] = { 0x30220000, 64 * KiB, "gpio3" }, + [FSL_IMX8MM_GPIO2] = { 0x30210000, 64 * KiB, "gpio2" }, + [FSL_IMX8MM_GPIO1] = { 0x30200000, 64 * KiB, "gpio1" }, + [FSL_IMX8MM_AIPS1_CONFIGURATION] = { 0x301f0000, 64 * KiB, "aips1_configuration" }, + [FSL_IMX8MM_SAI6] = { 0x30060000, 64 * KiB, "sai6" }, + [FSL_IMX8MM_SAI5] = { 0x30050000, 64 * KiB, "sai5" }, + [FSL_IMX8MM_SAI3] = { 0x30030000, 64 * KiB, "sai3" }, + [FSL_IMX8MM_SAI2] = { 0x30020000, 64 * KiB, "sai2" }, + [FSL_IMX8MM_SAI1] = { 0x30010000, 64 * KiB, "sai1" }, + + /* AIPS-1 End */ + + [FSL_IMX8MM_A53_DAP] = { 0x28000000, 16 * MiB, "a53_dap" }, + [FSL_IMX8MM_PCIE1_MEM] = { 0x18000000, 128 * MiB, "pcie1_mem" }, + [FSL_IMX8MM_QSPI_MEM] = { 0x08000000, 256 * MiB, "qspi_mem" }, + [FSL_IMX8MM_OCRAM] = { 0x00900000, 256 * KiB, "ocram" }, + [FSL_IMX8MM_TCM_DTCM] = { 0x00800000, 128 * KiB, "tcm_dtcm" }, + [FSL_IMX8MM_TCM_ITCM] = { 0x007e0000, 128 * KiB, "tcm_itcm" }, + [FSL_IMX8MM_OCRAM_S] = { 0x00180000, 32 * KiB, "ocram_s" }, + [FSL_IMX8MM_CAAM_MEM] = { 0x00100000, 32 * KiB, "caam_mem" }, + [FSL_IMX8MM_BOOT_ROM_PROTECTED] = { 0x0003f000, 4 * KiB, "boot_rom_protected" }, + [FSL_IMX8MM_BOOT_ROM] = { 0x00000000, 252 * KiB, "boot_rom" }, +}; + +static void fsl_imx8mm_init(Object *obj) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + FslImx8mmState *s = FSL_IMX8MM(obj); + const char *cpu_type = ms->cpu_type ?: ARM_CPU_TYPE_NAME("cortex-a53"); + int i; + + for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX8MM_NUM_CPUS); i++) { + g_autofree char *name = g_strdup_printf("cpu%d", i); + object_initialize_child(obj, name, &s->cpu[i], cpu_type); + } + + object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { + g_autofree char *name = g_strdup_printf("uart%d", i + 1); + object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); + } + +} + +static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) +{ + MachineState *ms = MACHINE(qdev_get_machine()); + FslImx8mmState *s = FSL_IMX8MM(dev); + DeviceState *gicdev = DEVICE(&s->gic); + int i; + + if (ms->smp.cpus > FSL_IMX8MM_NUM_CPUS) { + error_setg(errp, "%s: Only %d CPUs are supported (%d requested)", + TYPE_FSL_IMX8MM, FSL_IMX8MM_NUM_CPUS, ms->smp.cpus); + return; + } + + /* CPUs */ + for (i = 0; i < ms->smp.cpus; i++) { + /* On uniprocessor, the CBAR is set to 0 */ + if (ms->smp.cpus > 1 && + object_property_find(OBJECT(&s->cpu[i]), "reset-cbar")) { + object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar", + fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr, + &error_abort); + } + + /* + * CNTFID0 base frequency in Hz of system counter + */ + object_property_set_int(OBJECT(&s->cpu[i]), "cntfrq", 8000000, + &error_abort); + + if (object_property_find(OBJECT(&s->cpu[i]), "has_el2")) { + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el2", + !kvm_enabled(), &error_abort); + } + + if (object_property_find(OBJECT(&s->cpu[i]), "has_el3")) { + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3", + !kvm_enabled(), &error_abort); + } + + if (i) { + /* + * Secondary CPUs start in powered-down state (and can be + * powered up via the SRC system reset controller) + */ + object_property_set_bool(OBJECT(&s->cpu[i]), "start-powered-off", + true, &error_abort); + } + + if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) { + return; + } + } + + /* GIC */ + { + SysBusDevice *gicsbd = SYS_BUS_DEVICE(&s->gic); + QList *redist_region_count; + bool pmu = object_property_get_bool(OBJECT(first_cpu), "pmu", NULL); + + qdev_prop_set_uint32(gicdev, "num-cpu", ms->smp.cpus); + qdev_prop_set_uint32(gicdev, "num-irq", + FSL_IMX8MM_NUM_IRQS + GIC_INTERNAL); + redist_region_count = qlist_new(); + qlist_append_int(redist_region_count, ms->smp.cpus); + qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count); + object_property_set_link(OBJECT(&s->gic), "sysmem", + OBJECT(get_system_memory()), &error_fatal); + if (!sysbus_realize(gicsbd, errp)) { + return; + } + sysbus_mmio_map(gicsbd, 0, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_DIST].addr); + sysbus_mmio_map(gicsbd, 1, fsl_imx8mm_memmap[FSL_IMX8MM_GIC_REDIST].addr); + + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, and + * the GIC's IRQ/FIQ interrupt outputs to the CPU's inputs. + */ + for (i = 0; i < ms->smp.cpus; i++) { + DeviceState *cpudev = DEVICE(&s->cpu[i]); + int intidbase = FSL_IMX8MM_NUM_IRQS + i * GIC_INTERNAL; + qemu_irq irq; + + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs. + */ + static const int timer_irqs[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, + }; + + for (int j = 0; j < ARRAY_SIZE(timer_irqs); j++) { + irq = qdev_get_gpio_in(gicdev, intidbase + timer_irqs[j]); + qdev_connect_gpio_out(cpudev, j, irq); + } + + irq = qdev_get_gpio_in(gicdev, intidbase + ARCH_GIC_MAINT_IRQ); + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", + 0, irq); + + irq = qdev_get_gpio_in(gicdev, intidbase + VIRTUAL_PMU_IRQ); + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, irq); + + sysbus_connect_irq(gicsbd, i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicsbd, i + ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicsbd, i + 2 * ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicsbd, i + 3 * ms->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + + if (kvm_enabled()) { + if (pmu) { + assert(arm_feature(&s->cpu[i].env, ARM_FEATURE_PMU)); + if (kvm_irqchip_in_kernel()) { + kvm_arm_pmu_set_irq(&s->cpu[i], VIRTUAL_PMU_IRQ); + } + kvm_arm_pmu_init(&s->cpu[i]); + } + } + } + } + + /* UARTs */ + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } serial_table[FSL_IMX8MM_NUM_UARTS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_UART1].addr, FSL_IMX8MM_UART1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART2].addr, FSL_IMX8MM_UART2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART3].addr, FSL_IMX8MM_UART3_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_UART4].addr, FSL_IMX8MM_UART4_IRQ }, + }; + + qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i)); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, + qdev_get_gpio_in(gicdev, serial_table[i].irq)); + } + + /* On-Chip RAM */ + if (!memory_region_init_ram(&s->ocram, OBJECT(dev), "imx8mm.ocram", + fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].size, + errp)) { + return; + } + memory_region_add_subregion(get_system_memory(), + fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, + &s->ocram); + + /* Unimplemented devices */ + for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { + switch (i) { + case FSL_IMX8MM_GIC_DIST: + case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_RAM: + case FSL_IMX8MM_OCRAM: + case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + /* device implemented and treated above */ + break; + + default: + create_unimplemented_device(fsl_imx8mm_memmap[i].name, + fsl_imx8mm_memmap[i].addr, + fsl_imx8mm_memmap[i].size); + break; + } + } +} + +static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = fsl_imx8mm_realize; + + dc->desc = "i.MX 8MM SoC"; +} + +static const TypeInfo fsl_imx8mm_types[] = { + { + .name = TYPE_FSL_IMX8MM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(FslImx8mmState), + .instance_init = fsl_imx8mm_init, + .class_init = fsl_imx8mm_class_init, + }, +}; + +DEFINE_TYPES(fsl_imx8mm_types) diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ +/* + * NXP i.MX 8MM Evaluation Kit System Emulation + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "system/address-spaces.h" +#include "hw/arm/boot.h" +#include "hw/arm/fsl-imx8mm.h" +#include "hw/arm/machines-qom.h" +#include "hw/core/boards.h" +#include "hw/core/qdev-properties.h" +#include "system/kvm.h" +#include "system/qtest.h" +#include "qemu/error-report.h" +#include "qapi/error.h" +#include <libfdt.h> + +static void imx8mm_evk_modify_dtb(const struct arm_boot_info *info, void *fdt) +{ + int i, offset; + + /* Temporarily disable following nodes until they are implemented */ + const char *nodes_to_remove[] = { + "nxp,imx8mm-fspi", + "fsl,imx8mm-mipi-csi", + "fsl,imx8mm-mipi-dsim" + }; + + for (i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) { + const char *dev_str = nodes_to_remove[i]; + + offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); + while (offset >= 0) { + fdt_nop_node(fdt, offset); + offset = fdt_node_offset_by_compatible(fdt, offset, dev_str); + } + } + + /* Remove cpu-idle-states property from CPU nodes */ + offset = fdt_node_offset_by_compatible(fdt, -1, "arm,cortex-a53"); + while (offset >= 0) { + fdt_nop_property(fdt, offset, "cpu-idle-states"); + offset = fdt_node_offset_by_compatible(fdt, offset, "arm,cortex-a53"); + } + + if (kvm_enabled()) { + /* Use system counter frequency from host CPU to fix time in guest */ + offset = fdt_node_offset_by_compatible(fdt, -1, "arm,armv8-timer"); + while (offset >= 0) { + fdt_nop_property(fdt, offset, "clock-frequency"); + offset = fdt_node_offset_by_compatible(fdt, offset, "arm,armv8-timer"); + } + } +} + +static void imx8mm_evk_init(MachineState *machine) +{ + static struct arm_boot_info boot_info; + FslImx8mmState *s; + + if (machine->ram_size > FSL_IMX8MM_RAM_SIZE_MAX) { + error_report("RAM size " RAM_ADDR_FMT " above max supported (%08" PRIx64 ")", + machine->ram_size, FSL_IMX8MM_RAM_SIZE_MAX); + exit(1); + } + + boot_info = (struct arm_boot_info) { + .loader_start = FSL_IMX8MM_RAM_START, + .board_id = -1, + .ram_size = machine->ram_size, + .psci_conduit = QEMU_PSCI_CONDUIT_SMC, + .modify_dtb = imx8mm_evk_modify_dtb, + }; + + s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine), + "soc", &error_fatal, NULL)); + sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal); + + memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, + machine->ram); + + if (!qtest_enabled()) { + arm_load_kernel(&s->cpu[0], machine, &boot_info); + } +} + +static const char *imx8mm_evk_get_default_cpu_type(const MachineState *ms) +{ + if (kvm_enabled()) { + return ARM_CPU_TYPE_NAME("host"); + } + + return ARM_CPU_TYPE_NAME("cortex-a53"); +} + +static void imx8mm_evk_machine_init(MachineClass *mc) +{ + mc->desc = "NXP i.MX 8MM EVK Board"; + mc->init = imx8mm_evk_init; + mc->max_cpus = FSL_IMX8MM_NUM_CPUS; + mc->default_cpus = FSL_IMX8MM_NUM_CPUS; + mc->default_ram_size = 2 * GiB; + mc->default_ram_id = "imx8mm-evk.ram"; + mc->get_default_cpu_type = imx8mm_evk_get_default_cpu_type; +} + +DEFINE_MACHINE_AARCH64("imx8mm-evk", imx8mm_evk_machine_init) diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_common_ss.add(when: 'CONFIG_ARMSSE', if_true: files('armsse.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX7', if_true: files('fsl-imx7.c', 'mcimx7d-sabre.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP', if_true: files('fsl-imx8mp.c')) arm_common_ss.add(when: 'CONFIG_FSL_IMX8MP_EVK', if_true: files('imx8mp-evk.c')) +arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM', if_true: files('fsl-imx8mm.c')) +arm_common_ss.add(when: 'CONFIG_FSL_IMX8MM_EVK', if_true: files('imx8mm-evk.c')) arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmuv3.c')) arm_common_ss.add(when: 'CONFIG_ARM_SMMUV3_ACCEL', if_true: files('smmuv3-accel.c')) stub_ss.add(files('smmuv3-accel-stubs.c')) diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ +/* + * i.MX 8MM SoC Definitions + * + * Copyright (c) 2025, NXP Semiconductors + * Author: Gaurav Sharma <gaurav.sharma_7@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef FSL_IMX8MM_H +#define FSL_IMX8MM_H + +#include "cpu.h" +#include "hw/char/imx_serial.h" +#include "hw/intc/arm_gicv3_common.h" +#include "qom/object.h" +#include "qemu/units.h" + +#define TYPE_FSL_IMX8MM "fsl-imx8mm" +OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) + +#define FSL_IMX8MM_RAM_START 0x40000000 +#define FSL_IMX8MM_RAM_SIZE_MAX (4 * GiB) + +enum FslImx8mmConfiguration { + FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_IRQS = 128, + FSL_IMX8MM_NUM_UARTS = 4, +}; + +struct FslImx8mmState { + SysBusDevice parent_obj; + + ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; + GICv3State gic; + IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; + MemoryRegion ocram; +}; + +enum FslImx8mmMemoryRegions { + FSL_IMX8MM_A53_DAP, + FSL_IMX8MM_AIPS1_CONFIGURATION, + FSL_IMX8MM_AIPS2_CONFIGURATION, + FSL_IMX8MM_AIPS3_CONFIGURATION, + FSL_IMX8MM_AIPS4_CONFIGURATION, + FSL_IMX8MM_ANA_OSC, + FSL_IMX8MM_ANA_PLL, + FSL_IMX8MM_ANA_TSENSOR, + FSL_IMX8MM_APBH_DMA, + FSL_IMX8MM_BOOT_ROM, + FSL_IMX8MM_BOOT_ROM_PROTECTED, + FSL_IMX8MM_CAAM, + FSL_IMX8MM_CAAM_MEM, + FSL_IMX8MM_CCM, + FSL_IMX8MM_CSU, + FSL_IMX8MM_DDR_CTL, + FSL_IMX8MM_DDR_PERF_MON, + FSL_IMX8MM_DDR_PHY, + FSL_IMX8MM_DDR_PHY_BROADCAST, + FSL_IMX8MM_ECSPI1, + FSL_IMX8MM_ECSPI2, + FSL_IMX8MM_ECSPI3, + FSL_IMX8MM_ENET1, + FSL_IMX8MM_GIC_DIST, + FSL_IMX8MM_GIC_REDIST, + FSL_IMX8MM_GPC, + FSL_IMX8MM_GPIO1, + FSL_IMX8MM_GPIO2, + FSL_IMX8MM_GPIO3, + FSL_IMX8MM_GPIO4, + FSL_IMX8MM_GPIO5, + FSL_IMX8MM_GPT1, + FSL_IMX8MM_GPT2, + FSL_IMX8MM_GPT3, + FSL_IMX8MM_GPT4, + FSL_IMX8MM_GPT5, + FSL_IMX8MM_GPT6, + FSL_IMX8MM_GPU2D, + FSL_IMX8MM_I2C1, + FSL_IMX8MM_I2C2, + FSL_IMX8MM_I2C3, + FSL_IMX8MM_I2C4, + FSL_IMX8MM_INTERCONNECT, + FSL_IMX8MM_IOMUXC, + FSL_IMX8MM_IOMUXC_GPR, + FSL_IMX8MM_MEDIA_BLK_CTL, + FSL_IMX8MM_LCDIF, + FSL_IMX8MM_MIPI_CSI, + FSL_IMX8MM_MIPI_DSI, + FSL_IMX8MM_MU_A, + FSL_IMX8MM_MU_B, + FSL_IMX8MM_OCOTP_CTRL, + FSL_IMX8MM_OCRAM, + FSL_IMX8MM_OCRAM_S, + FSL_IMX8MM_PCIE1, + FSL_IMX8MM_PCIE1_MEM, + FSL_IMX8MM_PCIE_PHY1, + FSL_IMX8MM_PERFMON1, + FSL_IMX8MM_PERFMON2, + FSL_IMX8MM_PWM1, + FSL_IMX8MM_PWM2, + FSL_IMX8MM_PWM3, + FSL_IMX8MM_PWM4, + FSL_IMX8MM_QOSC, + FSL_IMX8MM_QSPI, + FSL_IMX8MM_QSPI1_RX_BUFFER, + FSL_IMX8MM_QSPI1_TX_BUFFER, + FSL_IMX8MM_QSPI_MEM, + FSL_IMX8MM_RAM, + FSL_IMX8MM_RDC, + FSL_IMX8MM_SAI1, + FSL_IMX8MM_SAI2, + FSL_IMX8MM_SAI3, + FSL_IMX8MM_SAI5, + FSL_IMX8MM_SAI6, + FSL_IMX8MM_SDMA1, + FSL_IMX8MM_SDMA2, + FSL_IMX8MM_SDMA3, + FSL_IMX8MM_SEMAPHORE1, + FSL_IMX8MM_SEMAPHORE2, + FSL_IMX8MM_SEMAPHORE_HS, + FSL_IMX8MM_SNVS_HP, + FSL_IMX8MM_SPBA1, + FSL_IMX8MM_SRC, + FSL_IMX8MM_SYSCNT_CMP, + FSL_IMX8MM_SYSCNT_CTRL, + FSL_IMX8MM_SYSCNT_RD, + FSL_IMX8MM_TCM_DTCM, + FSL_IMX8MM_TCM_ITCM, + FSL_IMX8MM_TZASC, + FSL_IMX8MM_UART1, + FSL_IMX8MM_UART2, + FSL_IMX8MM_UART3, + FSL_IMX8MM_UART4, + FSL_IMX8MM_USB1, + FSL_IMX8MM_USB2, + FSL_IMX8MM_USB1_OTG, + FSL_IMX8MM_USB2_OTG, + FSL_IMX8MM_USDHC1, + FSL_IMX8MM_USDHC2, + FSL_IMX8MM_USDHC3, + FSL_IMX8MM_VPU, + FSL_IMX8MM_VPU_BLK_CTRL, + FSL_IMX8MM_VPU_G1_DECODER, + FSL_IMX8MM_VPU_G2_DECODER, + FSL_IMX8MM_WDOG1, + FSL_IMX8MM_WDOG2, + FSL_IMX8MM_WDOG3, +}; + +enum FslImx8mmIrqs { + FSL_IMX8MM_UART1_IRQ = 26, + FSL_IMX8MM_UART2_IRQ = 27, + FSL_IMX8MM_UART3_IRQ = 28, + FSL_IMX8MM_UART4_IRQ = 29, +}; + +#endif /* FSL_IMX8MM_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add configurable properties for register reset values that differ between i.MX 8M variants (Plus, Mini, etc.). This allows the same device implementation to be shared across multiple SoCs. Properties added: - arm-pll-fdiv-ctl0-reset: ARM PLL divider control reset value Default value is set to match i.MX 8MP reset value (0x000FA031). This can be overridden in the variant like iMX8MM with its own reset value. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx8mp_analog.c | 12 +++++++++++- include/hw/misc/imx8mp_analog.h | 3 +++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/misc/imx8mp_analog.c b/hw/misc/imx8mp_analog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx8mp_analog.c +++ b/hw/misc/imx8mp_analog.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "hw/misc/imx8mp_analog.h" +#include "hw/core/qdev-properties.h" #include "migration/vmstate.h" #define ANALOG_PLL_LOCK BIT(31) @@ -XXX,XX +XXX,XX @@ static void imx8mp_analog_reset(DeviceState *dev) s->analog[ANALOG_VPU_PLL_LOCKD_CTRL] = 0x0010003f; s->analog[ANALOG_VPU_PLL_MNIT_CTRL] = 0x00280081; s->analog[ANALOG_ARM_PLL_GEN_CTRL] = 0x00000810; - s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = 0x000fa031; + + /* Use property value instead of hardcoded */ + s->analog[ANALOG_ARM_PLL_FDIV_CTL0] = s->arm_pll_fdiv_ctl0_reset; + s->analog[ANALOG_ARM_PLL_LOCKD_CTRL] = 0x0010003f; s->analog[ANALOG_ARM_PLL_MNIT_CTRL] = 0x00280081; s->analog[ANALOG_SYS_PLL1_GEN_CTRL] = 0x0aaaa810; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription imx8mp_analog_vmstate = { }, }; +static const Property imx8mp_analog_properties[] = { + DEFINE_PROP_UINT32("arm-pll-fdiv-ctl0-reset", IMX8MPAnalogState, + arm_pll_fdiv_ctl0_reset, 0x000fa031), /* imx8mp default */ +}; + static void imx8mp_analog_class_init(ObjectClass *klass, const void *data) { DeviceClass *dc = DEVICE_CLASS(klass); device_class_set_legacy_reset(dc, imx8mp_analog_reset); + device_class_set_props(dc, imx8mp_analog_properties); dc->vmsd = &imx8mp_analog_vmstate; dc->desc = "i.MX 8M Plus Analog Module"; } diff --git a/include/hw/misc/imx8mp_analog.h b/include/hw/misc/imx8mp_analog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/imx8mp_analog.h +++ b/include/hw/misc/imx8mp_analog.h @@ -XXX,XX +XXX,XX @@ struct IMX8MPAnalogState { } mmio; uint32_t analog[ANALOG_MAX]; + + /* Property for variant-specific reset values */ + uint32_t arm_pll_fdiv_ctl0_reset; }; #endif /* IMX8MP_ANALOG_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add the Analog IP to i.MX8MM SoC. iMX8MM and i.MX8MP uses the same Analog IP so the analog ip source will be shared. The ARM PLL divider control register (arm-pll-fdiv-ctl0) has a different reset value on i.MX8MM (0x000fa030) compared to i.MX8MP (0x000fa031). So iMX8MM will be overriding this property with its own reset-value. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 12 ++++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 3 files changed, 15 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool select ARM_GIC + select FSL_IMX8MP_ANALOG select IMX config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { g_autofree char *name = g_strdup_printf("uart%d", i + 1); object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } + /* Analog */ + object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset", + 0x000fa030, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->analog), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->analog), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_ANA_PLL].addr); + /* UARTs */ for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { + case FSL_IMX8MM_ANA_PLL: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/misc/imx8mp_analog.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMX8MPAnalogState analog; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; }; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Add the Clock Control Module (CCM) device to i.MX8MM SoC. The CCM implementation is shared with i.MX8MP as the register layout is identical between the two variants.Hence iMX8MM will be using the source of iMX8MP CCM. Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 10 ++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 3 files changed, 13 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM bool select ARM_GIC select FSL_IMX8MP_ANALOG + select FSL_IMX8MP_CCM select IMX config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "gic", &s->gic, gicv3_class_name()); + object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX8MP_CCM); + object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } + /* CCM */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->ccm), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_CCM].addr); + /* Analog */ object_property_set_uint(OBJECT(&s->analog), "arm-pll-fdiv-ctl0-reset", 0x000fa030, &error_abort); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { case FSL_IMX8MM_ANA_PLL: + case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx8mp_analog.h" +#include "hw/misc/imx8mp_ccm.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> SNVS contains an RTC which allows Linux to deal correctly with time Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 10 ++++++++++ include/hw/arm/fsl-imx8mm.h | 2 ++ 2 files changed, 12 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MP_ANALOG); + object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); + for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) { g_autofree char *name = g_strdup_printf("uart%d", i + 1); object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* SNVS */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_RAM: case FSL_IMX8MM_OCRAM: + case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: /* device implemented and treated above */ break; diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { GICv3State gic; IMX8MPCCMState ccm; IMX8MPAnalogState analog; + IMX7SNVSState snvs; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; }; -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of SD/MMC cards through a virtual SDHCI interface The emulated SDHCI controller allows guest OS to use emulated storage as a standard block device. This will allow running the images such as those generated by Buildroot. Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 25 +++++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 17 +++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 4 files changed, 50 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select SDHCI config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); + object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); + } } static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* USDHCs */ + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usdhc_table[FSL_IMX8MM_NUM_USDHCS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC1].addr, FSL_IMX8MM_USDHC1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC2].addr, FSL_IMX8MM_USDHC2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USDHC3].addr, FSL_IMX8MM_USDHC3_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usdhc[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, usdhc_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0, + qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); + } + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: /* device implemented and treated above */ break; diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx8mm-evk.c +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, machine->ram); + for (int i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { + BusState *bus; + DeviceState *carddev; + BlockBackend *blk; + DriveInfo *di = drive_get(IF_SD, i, 0); + + if (!di) { + continue; + } + + blk = blk_by_legacy_dinfo(di); + bus = qdev_get_child_bus(DEVICE(&s->usdhc[i]), "sd-bus"); + carddev = qdev_new(TYPE_SD_CARD); + qdev_prop_set_drive_err(carddev, "drive", blk, &error_fatal); + qdev_realize_and_unref(carddev, bus, &error_fatal); + } + if (!qtest_enabled()) { arm_load_kernel(&s->cpu[0], machine, &boot_info); } diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/sd/sdhci.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, + FSL_IMX8MM_NUM_USDHCS = 3, }; struct FslImx8mmState { @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX7SNVSState snvs; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; + SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmMemoryRegions { }; enum FslImx8mmIrqs { + FSL_IMX8MM_USDHC1_IRQ = 22, + FSL_IMX8MM_USDHC2_IRQ = 23, + FSL_IMX8MM_USDHC3_IRQ = 24, + FSL_IMX8MM_UART1_IRQ = 26, FSL_IMX8MM_UART2_IRQ = 27, FSL_IMX8MM_UART3_IRQ = 28, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> This enables support for Designware PCI Express Controller emulation It provides a controlled environment to debug the linux pci subsystem Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 3 +++ hw/arm/fsl-imx8mm.c | 30 ++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 10 ++++++++++ 3 files changed, 43 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool + imply PCI_DEVICES select ARM_GIC select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX select SDHCI + select PCI_EXPRESS_DESIGNWARE + select PCI_EXPRESS_FSL_IMX8M_PHY config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); + object_initialize_child(obj, "pcie_phy", &s->pcie_phy, + TYPE_FSL_IMX8M_PCIE_PHY); } static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* PCIe */ + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_PCIE1].addr); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTA_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 1, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTB_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 2, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTC_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_INTD_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 4, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_PCI_MSI_IRQ)); + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_phy), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie_phy), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_PCIE_PHY1].addr); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) { switch (i) { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_PCIE1: + case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/pci-host/designware.h" +#include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; + DesignwarePCIEHost pcie; + FslImx8mPciePhyState pcie_phy; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART2_IRQ = 27, FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + + FSL_IMX8MM_PCI_INTA_IRQ = 122, + FSL_IMX8MM_PCI_INTB_IRQ = 123, + FSL_IMX8MM_PCI_INTC_IRQ = 124, + FSL_IMX8MM_PCI_INTD_IRQ = 125, + FSL_IMX8MM_PCI_MSI_IRQ = 127, }; #endif /* FSL_IMX8MM_H */ -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Enabled GPIO controller emulation Also updated the GPIO IRQ lines of iMX8MM Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 54 +++++++++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 14 ++++++++++ 2 files changed, 68 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { + g_autofree char *name = g_strdup_printf("gpio%d", i + 1); + object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); + } + for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { g_autofree char *name = g_strdup_printf("usdhc%d", i + 1); object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* GPIOs */ + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { + static const struct { + hwaddr addr; + unsigned int irq_low; + unsigned int irq_high; + } gpio_table[FSL_IMX8MM_NUM_GPIOS] = { + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO1].addr, + FSL_IMX8MM_GPIO1_LOW_IRQ, + FSL_IMX8MM_GPIO1_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO2].addr, + FSL_IMX8MM_GPIO2_LOW_IRQ, + FSL_IMX8MM_GPIO2_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO3].addr, + FSL_IMX8MM_GPIO3_LOW_IRQ, + FSL_IMX8MM_GPIO3_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO4].addr, + FSL_IMX8MM_GPIO4_LOW_IRQ, + FSL_IMX8MM_GPIO4_HIGH_IRQ + }, + { + fsl_imx8mm_memmap[FSL_IMX8MM_GPIO5].addr, + FSL_IMX8MM_GPIO5_LOW_IRQ, + FSL_IMX8MM_GPIO5_HIGH_IRQ + }, + }; + object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true, + &error_abort); + object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq", + true, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, + qdev_get_gpio_in(gicdev, gpio_table[i].irq_low)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, + qdev_get_gpio_in(gicdev, gpio_table[i].irq_high)); + } + /* USDHCs */ for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_CCM: case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: + case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" +#include "hw/gpio/imx_gpio.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_GPIOS = 5, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMXGPIOState gpio[FSL_IMX8MM_NUM_GPIOS]; IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, + FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, + FSL_IMX8MM_GPIO2_LOW_IRQ = 66, + FSL_IMX8MM_GPIO2_HIGH_IRQ = 67, + FSL_IMX8MM_GPIO3_LOW_IRQ = 68, + FSL_IMX8MM_GPIO3_HIGH_IRQ = 69, + FSL_IMX8MM_GPIO4_LOW_IRQ = 70, + FSL_IMX8MM_GPIO4_HIGH_IRQ = 71, + FSL_IMX8MM_GPIO5_LOW_IRQ = 72, + FSL_IMX8MM_GPIO5_HIGH_IRQ = 73, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> This can be used to test and debug I2C device drivers. Added I2C interrupts Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 2 ++ hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 8 ++++++++ 3 files changed, 37 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MP_EVK config FSL_IMX8MM bool imply PCI_DEVICES + imply I2C_DEVICES select ARM_GIC select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select IMX_I2C select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { + g_autofree char *name = g_strdup_printf("i2c%d", i + 1); + object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); + } + for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { g_autofree char *name = g_strdup_printf("gpio%d", i + 1); object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* I2Cs */ + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } i2c_table[FSL_IMX8MM_NUM_I2CS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C1].addr, FSL_IMX8MM_I2C1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C2].addr, FSL_IMX8MM_I2C2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C3].addr, FSL_IMX8MM_I2C3_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_I2C4].addr, FSL_IMX8MM_I2C4_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0, + qdev_get_gpio_in(gicdev, i2c_table[i].irq)); + } + /* GPIOs */ for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: case FSL_IMX8MM_RAM: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/char/imx_serial.h" #include "hw/gpio/imx_gpio.h" +#include "hw/i2c/imx_i2c.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_GPIOS = 5, + FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; + IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_I2C1_IRQ = 35, + FSL_IMX8MM_I2C2_IRQ = 36, + FSL_IMX8MM_I2C3_IRQ = 37, + FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, FSL_IMX8MM_GPIO2_LOW_IRQ = 66, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of ECSPI in iMX8MM Added SPI IRQ lines Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx8mm.c | 26 ++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 2 files changed, 33 insertions(+) diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { + g_autofree char *name = g_strdup_printf("spi%d", i + 1); + object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); + } + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); } + /* ECSPIs */ + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } spi_table[FSL_IMX8MM_NUM_ECSPIS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI1].addr, FSL_IMX8MM_ECSPI1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI2].addr, FSL_IMX8MM_ECSPI2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_ECSPI3].addr, FSL_IMX8MM_ECSPI3_IRQ }, + }; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, + qdev_get_gpio_in(gicdev, spi_table[i].irq)); + } + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" +#include "hw/ssi/imx_spi.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM) enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, + FSL_IMX8MM_NUM_ECSPIS = 3, FSL_IMX8MM_NUM_GPIOS = 5, FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX8MPCCMState ccm; IMX8MPAnalogState analog; IMX7SNVSState snvs; + IMXSPIState spi[FSL_IMX8MM_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_UART3_IRQ = 28, FSL_IMX8MM_UART4_IRQ = 29, + FSL_IMX8MM_ECSPI1_IRQ = 31, + FSL_IMX8MM_ECSPI2_IRQ = 32, + FSL_IMX8MM_ECSPI3_IRQ = 33, + FSL_IMX8MM_I2C1_IRQ = 35, FSL_IMX8MM_I2C2_IRQ = 36, FSL_IMX8MM_I2C3_IRQ = 37, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of WDT in iMX8MM Added WDT IRQ lines Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 28 ++++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 7 +++++++ 3 files changed, 36 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY + select WDT_IMX2 config FSL_IMX8MM_EVK bool diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); } + for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) { + g_autofree char *name = g_strdup_printf("wdt%d", i); + object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); + } + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr); + /* Watchdogs */ + for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } wdog_table[FSL_IMX8MM_NUM_WDTS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG1].addr, FSL_IMX8MM_WDOG1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG2].addr, FSL_IMX8MM_WDOG2_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG3].addr, FSL_IMX8MM_WDOG3_IRQ }, + }; + + object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support", + true, &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, wdog_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(gicdev, wdog_table[i].irq)); + } + /* PCIe */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: + case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3: /* device implemented and treated above */ break; diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" +#include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, FSL_IMX8MM_NUM_USDHCS = 3, + FSL_IMX8MM_NUM_WDTS = 3, }; struct FslImx8mmState { @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; + IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; }; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_GPIO5_LOW_IRQ = 72, FSL_IMX8MM_GPIO5_HIGH_IRQ = 73, + FSL_IMX8MM_WDOG1_IRQ = 78, + FSL_IMX8MM_WDOG2_IRQ = 79, + FSL_IMX8MM_WDOG3_IRQ = 10, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of GPT in iMX8MM Added GPT IRQ lines Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 54 +++++++++++++++++++++++++++++++++++++ hw/timer/imx_gpt.c | 26 ++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 11 ++++++++ include/hw/timer/imx_gpt.h | 2 ++ 5 files changed, 94 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_CCM select IMX select IMX_I2C + select OR_IRQ select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); } + for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) { + g_autofree char *name = g_strdup_printf("gpt%d", i + 1); + object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX8MM_GPT); + } + object_initialize_child(obj, "gpt5-gpt6-irq", &s->gpt5_gpt6_irq, + TYPE_OR_IRQ); + for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { g_autofree char *name = g_strdup_printf("i2c%d", i + 1); object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) fsl_imx8mm_memmap[FSL_IMX8MM_OCRAM].addr, &s->ocram); + /* GPTs */ + object_property_set_int(OBJECT(&s->gpt5_gpt6_irq), "num-lines", 2, + &error_abort); + if (!qdev_realize(DEVICE(&s->gpt5_gpt6_irq), NULL, errp)) { + return; + } + + qdev_connect_gpio_out(DEVICE(&s->gpt5_gpt6_irq), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_GPT5_GPT6_IRQ)); + + for (i = 0; i < FSL_IMX8MM_NUM_GPTS; i++) { + hwaddr gpt_addrs[FSL_IMX8MM_NUM_GPTS] = { + fsl_imx8mm_memmap[FSL_IMX8MM_GPT1].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT2].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT3].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT4].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT5].addr, + fsl_imx8mm_memmap[FSL_IMX8MM_GPT6].addr, + }; + + s->gpt[i].ccm = IMX_CCM(&s->ccm); + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_addrs[i]); + + if (i < FSL_IMX8MM_NUM_GPTS - 2) { + static const unsigned int gpt_irqs[FSL_IMX8MM_NUM_GPTS - 2] = { + FSL_IMX8MM_GPT1_IRQ, + FSL_IMX8MM_GPT2_IRQ, + FSL_IMX8MM_GPT3_IRQ, + FSL_IMX8MM_GPT4_IRQ, + }; + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(gicdev, gpt_irqs[i])); + } else { + int irq = i - FSL_IMX8MM_NUM_GPTS + 2; + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->gpt5_gpt6_irq), irq)); + } + } + /* I2Cs */ for (i = 0; i < FSL_IMX8MM_NUM_I2CS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GIC_DIST: case FSL_IMX8MM_GIC_REDIST: case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: + case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6: case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_gpt.c +++ b/hw/timer/imx_gpt.c @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com> * * This code is licensed under GPL version 2 or later. See * the COPYING file in the top-level directory. @@ -XXX,XX +XXX,XX @@ static const IMXClk imx8mp_gpt_clocks[] = { CLK_NONE, /* 111 not defined */ }; +static const IMXClk imx8mm_gpt_clocks[] = { + CLK_NONE, /* 000 No clock source */ + CLK_IPG, /* 001 ipg_clk, 532MHz */ + CLK_IPG_HIGH, /* 010 ipg_clk_highfreq */ + CLK_EXT, /* 011 External clock */ + CLK_32k, /* 100 ipg_clk_32k */ + CLK_HIGH, /* 101 ipg_clk_16M */ + CLK_NONE, /* 110 not defined */ + CLK_NONE, /* 111 not defined */ +}; + /* Must be called from within ptimer_transaction_begin/commit block */ static void imx_gpt_set_freq(IMXGPTState *s) { @@ -XXX,XX +XXX,XX @@ static void imx8mp_gpt_init(Object *obj) s->clocks = imx8mp_gpt_clocks; } +static void imx8mm_gpt_init(Object *obj) +{ + IMXGPTState *s = IMX_GPT(obj); + + s->clocks = imx8mm_gpt_clocks; +} + static const TypeInfo imx25_gpt_info = { .name = TYPE_IMX25_GPT, .parent = TYPE_SYS_BUS_DEVICE, @@ -XXX,XX +XXX,XX @@ static const TypeInfo imx8mp_gpt_info = { .instance_init = imx8mp_gpt_init, }; +static const TypeInfo imx8mm_gpt_info = { + .name = TYPE_IMX8MM_GPT, + .parent = TYPE_IMX25_GPT, + .instance_init = imx8mm_gpt_init, +}; + static void imx_gpt_register_types(void) { type_register_static(&imx25_gpt_info); @@ -XXX,XX +XXX,XX @@ static void imx_gpt_register_types(void) type_register_static(&imx6ul_gpt_info); type_register_static(&imx7_gpt_info); type_register_static(&imx8mp_gpt_info); + type_register_static(&imx8mm_gpt_info); } type_init(imx_gpt_register_types) diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" +#include "hw/or-irq.h" #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" +#include "hw/timer/imx_gpt.h" #include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_CPUS = 4, FSL_IMX8MM_NUM_ECSPIS = 3, FSL_IMX8MM_NUM_GPIOS = 5, + FSL_IMX8MM_NUM_GPTS = 6, FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { ARMCPU cpu[FSL_IMX8MM_NUM_CPUS]; GICv3State gic; + IMXGPTState gpt[FSL_IMX8MM_NUM_GPTS]; IMXGPIOState gpio[FSL_IMX8MM_NUM_GPIOS]; IMX8MPCCMState ccm; IMX8MPAnalogState analog; @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; + OrIRQState gpt5_gpt6_irq; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_I2C3_IRQ = 37, FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_GPT1_IRQ = 55, + FSL_IMX8MM_GPT2_IRQ = 54, + FSL_IMX8MM_GPT3_IRQ = 53, + FSL_IMX8MM_GPT4_IRQ = 52, + FSL_IMX8MM_GPT5_GPT6_IRQ = 51, + FSL_IMX8MM_GPIO1_LOW_IRQ = 64, FSL_IMX8MM_GPIO1_HIGH_IRQ = 65, FSL_IMX8MM_GPIO2_LOW_IRQ = 66, diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_gpt.h +++ b/include/hw/timer/imx_gpt.h @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Gaurav Sharma <gaurav.sharma_7@nxp.com> * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -XXX,XX +XXX,XX @@ #define TYPE_IMX6UL_GPT "imx6ul.gpt" #define TYPE_IMX7_GPT "imx7.gpt" #define TYPE_IMX8MP_GPT "imx8mp.gpt" +#define TYPE_IMX8MM_GPT "imx8mm.gpt" #define TYPE_IMX_GPT TYPE_IMX25_GPT -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of ENET ethernet controller in iMX8MM Enables testing and debugging of network dependent drivers Added ENET MAC IRQ lines Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 24 ++++++++++++++++++++++++ hw/arm/imx8mm-evk.c | 1 + include/hw/arm/fsl-imx8mm.h | 10 +++++++++- 4 files changed, 35 insertions(+), 1 deletion(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select FSL_IMX8MP_ANALOG select FSL_IMX8MP_CCM select IMX + select IMX_FEC select IMX_I2C select OR_IRQ select SDHCI diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); } + object_initialize_child(obj, "eth0", &s->enet, TYPE_IMX_ENET); + object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); object_initialize_child(obj, "pcie_phy", &s->pcie_phy, TYPE_FSL_IMX8M_PCIE_PHY); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, spi_table[i].irq)); } + /* ENET1 */ + object_property_set_uint(OBJECT(&s->enet), "phy-num", s->phy_num, + &error_abort); + object_property_set_uint(OBJECT(&s->enet), "tx-ring-num", 3, &error_abort); + qemu_configure_nic_device(DEVICE(&s->enet), true, NULL); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->enet), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->enet), 0, + fsl_imx8mm_memmap[FSL_IMX8MM_ENET1].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 0, + qdev_get_gpio_in(gicdev, FSL_IMX8MM_ENET1_MAC_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->enet), 1, + qdev_get_gpio_in(gicdev, FSL_IMX6_ENET1_MAC_1588_IRQ)); + /* SNVS */ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5: case FSL_IMX8MM_GPT1 ... FSL_IMX8MM_GPT6: case FSL_IMX8MM_ECSPI1 ... FSL_IMX8MM_ECSPI3: + case FSL_IMX8MM_ENET1: case FSL_IMX8MM_I2C1 ... FSL_IMX8MM_I2C4: case FSL_IMX8MM_PCIE1: case FSL_IMX8MM_PCIE_PHY1: @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) } } +static const Property fsl_imx8mm_properties[] = { + DEFINE_PROP_UINT32("fec1-phy-num", FslImx8mmState, phy_num, 0), + DEFINE_PROP_BOOL("fec1-phy-connected", FslImx8mmState, phy_connected, true), +}; + static void fsl_imx8mm_class_init(ObjectClass *oc, const void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + device_class_set_props(dc, fsl_imx8mm_properties); dc->realize = fsl_imx8mm_realize; dc->desc = "i.MX 8MM SoC"; diff --git a/hw/arm/imx8mm-evk.c b/hw/arm/imx8mm-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx8mm-evk.c +++ b/hw/arm/imx8mm-evk.c @@ -XXX,XX +XXX,XX @@ static void imx8mm_evk_init(MachineState *machine) s = FSL_IMX8MM(object_new_with_props(TYPE_FSL_IMX8MM, OBJECT(machine), "soc", &error_fatal, NULL)); + object_property_set_uint(OBJECT(s), "fec1-phy-num", 1, &error_fatal); sysbus_realize_and_unref(SYS_BUS_DEVICE(s), &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX8MM_RAM_START, diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx8mp_analog.h" #include "hw/misc/imx8mp_ccm.h" -#include "hw/or-irq.h" +#include "hw/net/imx_fec.h" +#include "hw/core/or-irq.h" #include "hw/pci-host/designware.h" #include "hw/pci-host/fsl_imx8m_phy.h" #include "hw/sd/sdhci.h" @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXI2CState i2c[FSL_IMX8MM_NUM_I2CS]; IMXSerialState uart[FSL_IMX8MM_NUM_UARTS]; MemoryRegion ocram; + IMXFECState enet; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; OrIRQState gpt5_gpt6_irq; + + uint32_t phy_num; + bool phy_connected; }; enum FslImx8mmMemoryRegions { @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_WDOG2_IRQ = 79, FSL_IMX8MM_WDOG3_IRQ = 10, + FSL_IMX8MM_ENET1_MAC_IRQ = 118, + FSL_IMX6_ENET1_MAC_1588_IRQ = 121, + FSL_IMX8MM_PCI_INTA_IRQ = 122, FSL_IMX8MM_PCI_INTB_IRQ = 123, FSL_IMX8MM_PCI_INTC_IRQ = 124, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> It enables emulation of USB on iMX8MM Enables testing and debugging of USB drivers Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++ include/hw/arm/fsl-imx8mm.h | 6 ++++++ 3 files changed, 34 insertions(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX8MM select SDHCI select PCI_EXPRESS_DESIGNWARE select PCI_EXPRESS_FSL_IMX8M_PHY + select USB_DWC3 select WDT_IMX2 config FSL_IMX8MM_EVK diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx8mm.c +++ b/hw/arm/fsl-imx8mm.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_init(Object *obj) object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); } + for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) { + g_autofree char *name = g_strdup_printf("usb%d", i); + object_initialize_child(obj, name, &s->usb[i], TYPE_USB_DWC3); + } + for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { g_autofree char *name = g_strdup_printf("spi%d", i + 1); object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(gicdev, usdhc_table[i].irq)); } + /* USBs */ + for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usb_table[FSL_IMX8MM_NUM_USBS] = { + { fsl_imx8mm_memmap[FSL_IMX8MM_USB1].addr, FSL_IMX8MM_USB1_IRQ }, + { fsl_imx8mm_memmap[FSL_IMX8MM_USB2].addr, FSL_IMX8MM_USB2_IRQ }, + }; + + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p2", 1); + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p3", 1); + qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "slots", 2); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 0, + qdev_get_gpio_in(gicdev, usb_table[i].irq)); + } + /* ECSPIs */ for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) { static const struct { @@ -XXX,XX +XXX,XX @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp) case FSL_IMX8MM_OCRAM: case FSL_IMX8MM_SNVS_HP: case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4: + case FSL_IMX8MM_USB1 ... FSL_IMX8MM_USB2: case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3: case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3: /* device implemented and treated above */ diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx8mm.h +++ b/include/hw/arm/fsl-imx8mm.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/sdhci.h" #include "hw/ssi/imx_spi.h" #include "hw/timer/imx_gpt.h" +#include "hw/usb/hcd-dwc3.h" #include "hw/watchdog/wdt_imx2.h" #include "qom/object.h" #include "qemu/units.h" @@ -XXX,XX +XXX,XX @@ enum FslImx8mmConfiguration { FSL_IMX8MM_NUM_I2CS = 4, FSL_IMX8MM_NUM_IRQS = 128, FSL_IMX8MM_NUM_UARTS = 4, + FSL_IMX8MM_NUM_USBS = 2, FSL_IMX8MM_NUM_USDHCS = 3, FSL_IMX8MM_NUM_WDTS = 3, }; @@ -XXX,XX +XXX,XX @@ struct FslImx8mmState { IMXFECState enet; SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS]; IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS]; + USBDWC3 usb[FSL_IMX8MM_NUM_USBS]; DesignwarePCIEHost pcie; FslImx8mPciePhyState pcie_phy; OrIRQState gpt5_gpt6_irq; @@ -XXX,XX +XXX,XX @@ enum FslImx8mmIrqs { FSL_IMX8MM_I2C3_IRQ = 37, FSL_IMX8MM_I2C4_IRQ = 38, + FSL_IMX8MM_USB1_IRQ = 40, + FSL_IMX8MM_USB2_IRQ = 41, + FSL_IMX8MM_GPT1_IRQ = 55, FSL_IMX8MM_GPT2_IRQ = 54, FSL_IMX8MM_GPT3_IRQ = 53, -- 2.43.0 From: Gaurav Sharma <gaurav.sharma_7@nxp.com> Added script that would validate the iMX8MM emulation by checking the linux console log. If it succeeds, it will return:- ok 1 test_imx8mm_evk.Imx8mmEvkMachine.test_aarch64_imx8mm_evk_usdhc Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com> [PMM: Add missing blank lines that flake8 wants] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + tests/functional/aarch64/meson.build | 2 + tests/functional/aarch64/test_imx8mm_evk.py | 69 +++++++++++++++++++++ 3 files changed, 72 insertions(+) create mode 100755 tests/functional/aarch64/test_imx8mm_evk.py diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/arm/fsl-imx8mm.c F: hw/arm/imx8mm-evk.c F: include/hw/arm/fsl-imx8mm.h F: docs/system/arm/imx8m.rst +F: tests/functional/aarch64/test_imx8mm_evk.py MCIMX8MP-EVK / i.MX8MP M: Bernhard Beschow <shentey@gmail.com> diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aarch64/meson.build +++ b/tests/functional/aarch64/meson.build @@ -XXX,XX +XXX,XX @@ test_aarch64_timeouts = { 'aspeed_ast2700a2' : 600, 'aspeed_ast2700fc' : 600, 'device_passthrough' : 720, + 'imx8mm_evk' : 240, 'imx8mp_evk' : 240, 'raspi4' : 480, 'reverse_debug' : 180, @@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [ 'aspeed_ast2700fc', 'device_passthrough', 'hotplug_pci', + 'imx8mm_evk', 'imx8mp_evk', 'kvm', 'multiprocess', diff --git a/tests/functional/aarch64/test_imx8mm_evk.py b/tests/functional/aarch64/test_imx8mm_evk.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/aarch64/test_imx8mm_evk.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots a Linux kernel and checks the console +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import LinuxKernelTest, Asset + + +class Imx8mmEvkMachine(LinuxKernelTest): + + ASSET_IMAGE = Asset( + ('https://cloud.debian.org/images/cloud/bookworm/20231210-1590/' + 'debian-12-generic-arm64-20231210-1590.tar.xz'), + '7ebf1577b32d5af6204df74b54ca2e4675de9b5a9fa14f3ff70b88eeb7b3b359') + + KERNEL_OFFSET = 0x51000000 + KERNEL_SIZE = 32622528 + INITRD_OFFSET = 0x76000000 + INITRD_SIZE = 30987766 + DTB_OFFSET = 0x64DB5000 + DTB_SIZE = 36812 + + def extract(self, in_path, out_path, offset, size): + try: + with open(in_path, "rb") as source: + source.seek(offset) + data = source.read(size) + with open(out_path, "wb") as target: + target.write(data) + except (IOError, ValueError) as e: + self.log.error(f"Failed to extract {out_path}: {e}") + raise + + def setUp(self): + super().setUp() + + self.image_path = self.scratch_file("disk.raw") + self.kernel_path = self.scratch_file("linux") + self.initrd_path = self.scratch_file("initrd.zstd") + self.dtb_path = self.scratch_file("imx8mm-evk.dtb") + + self.archive_extract(self.ASSET_IMAGE) + self.extract(self.image_path, self.kernel_path, + self.KERNEL_OFFSET, self.KERNEL_SIZE) + self.extract(self.image_path, self.initrd_path, + self.INITRD_OFFSET, self.INITRD_SIZE) + self.extract(self.image_path, self.dtb_path, + self.DTB_OFFSET, self.DTB_SIZE) + + def test_aarch64_imx8mm_evk_usdhc(self): + self.require_accelerator("tcg") + self.set_machine('imx8mm-evk') + self.vm.set_console(console_index=1) + self.vm.add_args('-m', '2G', + '-smp', '4', + '-kernel', self.kernel_path, + '-initrd', self.initrd_path, + '-dtb', self.dtb_path, + '-append', 'root=/dev/mmcblk2p1', + '-drive', f'file={self.image_path},if=sd,bus=2,' + 'format=raw,id=mmcblk2,snapshot=on') + + self.vm.launch() + self.wait_for_console_pattern('Welcome to ') + + +if __name__ == '__main__': + LinuxKernelTest.main() -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> As mentioned by Richard in [*]: We don't actually need any specific endianness here, because every byte has the same value. So we could simply drop MO_TE. That would produce a store in host-endianness, which will be fractionally more efficient on some hosts. [*] https://lore.kernel.org/qemu-devel/d64d3576-9188-4e74-afdc-3492c9feb8e0@linaro.org/ Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260414005348.4767-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/helper-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ static uint64_t set_step_tags(CPUARMState *env, uint64_t toaddr, * the page dirty and will use the fast path. */ uint64_t repldata = data * 0x0101010101010101ULL; - MemOpIdx oi16 = make_memop_idx(MO_TE | MO_128, memidx); + MemOpIdx oi16 = make_memop_idx(MO_128, memidx); cpu_st16_mmu(env, toaddr, int128_make128(repldata, repldata), oi16, ra); mte_mops_set_tags(env, toaddr, 16, *mtedesc); return 16; -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Extract the implicit MO_TE definition in order to replace it in the next commit. Mechanical change using: $ for n in UW UL UQ UO SW SL SQ; do \ sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \ $(git grep -l MO_TE$n target/arm); \ done Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 6 +-- target/arm/tcg/mve_helper.c | 79 ++++++++++++++++++++----------------- 2 files changed, 45 insertions(+), 40 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) /* Note that these stores can throw exceptions on MPU faults */ ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); cpu_stl_mmu(env, sp, nextinst, oi, GETPC()); cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC()); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); assert(env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) ARMCPU *cpu = env_archcpu(env); uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); /* fptr is the value of Rn, the frame pointer we load the FP regs from */ diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) } DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t) -DO_VLDR(vldrh, MO_TEUW, 2, uint16_t, ldw, 2, uint16_t) -DO_VLDR(vldrw, MO_TEUL, 4, uint32_t, ldl, 4, uint32_t) +DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t) +DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t) DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t) -DO_VSTR(vstrh, MO_TEUW, 2, stw, 2, uint16_t) -DO_VSTR(vstrw, MO_TEUL, 4, stl, 4, uint32_t) +DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t) +DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t) DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t) DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t) DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t) DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t) -DO_VLDR(vldrh_sw, MO_TESW, 2, int16_t, ldw, 4, int32_t) -DO_VLDR(vldrh_uw, MO_TEUW, 2, uint16_t, ldw, 4, uint32_t) +DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t) +DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t) DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t) DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t) -DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) +DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t) #undef DO_VLDR #undef DO_VSTR @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_TEUW, 2, stw, 4, int32_t) DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_sw, MO_TESW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4, + int32_t, uint32_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uh, MO_TEUW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uw, MO_TEUW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrw_sg_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2, + uint16_t, uint16_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4, + uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4, + uint32_t, uint32_t, ADDR_ADD, false) DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_os_sw, MO_TESW, int16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uh, MO_TEUW, uint16_t, ldw, 2, +DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uw, MO_TEUW, uint16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrw_sg_os_uw, MO_TEUL, uint32_t, ldl, 4, +DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false) DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false) DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrw_sg_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false) DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_os_uh, MO_TEUW, stw, 2, uint16_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrh_sg_os_uw, MO_TEUW, stw, 4, uint32_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrw_sg_os_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD_OSW, false) +DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false) -DO_VLDR_SG(vldrw_sg_wb_uw, MO_TEUL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true) +DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4, + uint32_t, uint32_t, ADDR_ADD, true) DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true) -DO_VSTR_SG(vstrw_sg_wb_uw, MO_TEUL, stl, 4, uint32_t, ADDR_ADD, true) +DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true) DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) /* @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TEUL | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t eci_mask = mve_eci_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ /* \ * R_SXTM allows the dest reg to become UNKNOWN for abandoned \ * beats so we don't care if we update part of the dest and \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t mask = mve_element_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (b = 0, e = 0; b < 16; b += ESIZE, e++) { \ if (mask & (1 << b)) { \ cpu_##STTYPE##_mmu(env, addr, d[H##ESIZE(e)], oi, GETPC()); \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) } DO_VLDR(vldrb, MO_UB, 1, uint8_t, ldb, 1, uint8_t) -DO_VLDR(vldrh, MO_TE | MO_UW, 2, uint16_t, ldw, 2, uint16_t) -DO_VLDR(vldrw, MO_TE | MO_UL, 4, uint32_t, ldl, 4, uint32_t) +DO_VLDR(vldrh, MO_UW, 2, uint16_t, ldw, 2, uint16_t) +DO_VLDR(vldrw, MO_UL, 4, uint32_t, ldl, 4, uint32_t) DO_VSTR(vstrb, MO_UB, 1, stb, 1, uint8_t) -DO_VSTR(vstrh, MO_TE | MO_UW, 2, stw, 2, uint16_t) -DO_VSTR(vstrw, MO_TE | MO_UL, 4, stl, 4, uint32_t) +DO_VSTR(vstrh, MO_UW, 2, stw, 2, uint16_t) +DO_VSTR(vstrw, MO_UL, 4, stl, 4, uint32_t) DO_VLDR(vldrb_sh, MO_SB, 1, int8_t, ldb, 2, int16_t) DO_VLDR(vldrb_sw, MO_SB, 1, int8_t, ldb, 4, int32_t) DO_VLDR(vldrb_uh, MO_UB, 1, uint8_t, ldb, 2, uint16_t) DO_VLDR(vldrb_uw, MO_UB, 1, uint8_t, ldb, 4, uint32_t) -DO_VLDR(vldrh_sw, MO_TE | MO_SW, 2, int16_t, ldw, 4, int32_t) -DO_VLDR(vldrh_uw, MO_TE | MO_UW, 2, uint16_t, ldw, 4, uint32_t) +DO_VLDR(vldrh_sw, MO_SW, 2, int16_t, ldw, 4, int32_t) +DO_VLDR(vldrh_uw, MO_UW, 2, uint16_t, ldw, 4, uint32_t) DO_VSTR(vstrb_h, MO_UB, 1, stb, 2, int16_t) DO_VSTR(vstrb_w, MO_UB, 1, stb, 4, int32_t) -DO_VSTR(vstrh_w, MO_TE | MO_UW, 2, stw, 4, int32_t) +DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) #undef DO_VLDR #undef DO_VSTR -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 43 +++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 23 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MFLAG | MO_ALIGN, mmu_idx); \ + MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) DO_VLDR_SG(vldrb_sg_sh, MO_SB, int8_t, ldb, 2, int16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_sw, MO_SB, int8_t, ldb, 4, int32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_sw, MO_TE | MO_SW, int16_t, ldw, 4, - int32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_ub, MO_UB, uint8_t, ldb, 1, uint8_t, uint8_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uh, MO_UB, uint8_t, ldb, 2, uint16_t, uint16_t, ADDR_ADD, false) DO_VLDR_SG(vldrb_sg_uw, MO_UB, uint8_t, ldb, 4, uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uh, MO_TE | MO_UW, uint16_t, ldw, 2, - uint16_t, uint16_t, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_uw, MO_TE | MO_UW, uint16_t, ldw, 4, - uint32_t, uint32_t, ADDR_ADD, false) -DO_VLDR_SG(vldrw_sg_uw, MO_TE | MO_UL, uint32_t, ldl, 4, - uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD, false) +DO_VLDR_SG(vldrh_sg_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD, false) +DO_VLDR_SG(vldrw_sg_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, false) DO_VLDR64_SG(vldrd_sg_ud, ADDR_ADD, false) -DO_VLDR_SG(vldrh_sg_os_sw, MO_TE | MO_SW, int16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_sw, MO_SW, int16_t, ldw, 4, int32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uh, MO_TE | MO_UW, uint16_t, ldw, 2, +DO_VLDR_SG(vldrh_sg_os_uh, MO_UW, uint16_t, ldw, 2, uint16_t, uint16_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrh_sg_os_uw, MO_TE | MO_UW, uint16_t, ldw, 4, +DO_VLDR_SG(vldrh_sg_os_uw, MO_UW, uint16_t, ldw, 4, uint32_t, uint32_t, ADDR_ADD_OSH, false) -DO_VLDR_SG(vldrw_sg_os_uw, MO_TE | MO_UL, uint32_t, ldl, 4, +DO_VLDR_SG(vldrw_sg_os_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD_OSW, false) DO_VLDR64_SG(vldrd_sg_os_ud, ADDR_ADD_OSD, false) DO_VSTR_SG(vstrb_sg_ub, MO_UB, stb, 1, uint8_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uh, MO_UB, stb, 2, uint16_t, ADDR_ADD, false) DO_VSTR_SG(vstrb_sg_uw, MO_UB, stb, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD, false) -DO_VSTR_SG(vstrw_sg_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD, false) +DO_VSTR_SG(vstrh_sg_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD, false) +DO_VSTR_SG(vstrw_sg_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, false) DO_VSTR64_SG(vstrd_sg_ud, ADDR_ADD, false) -DO_VSTR_SG(vstrh_sg_os_uh, MO_TE | MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrh_sg_os_uw, MO_TE | MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) -DO_VSTR_SG(vstrw_sg_os_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) +DO_VSTR_SG(vstrh_sg_os_uh, MO_UW, stw, 2, uint16_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrh_sg_os_uw, MO_UW, stw, 4, uint32_t, ADDR_ADD_OSH, false) +DO_VSTR_SG(vstrw_sg_os_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD_OSW, false) DO_VSTR64_SG(vstrd_sg_os_ud, ADDR_ADD_OSD, false) -DO_VLDR_SG(vldrw_sg_wb_uw, MO_TE | MO_UL, uint32_t, ldl, 4, - uint32_t, uint32_t, ADDR_ADD, true) +DO_VLDR_SG(vldrw_sg_wb_uw, MO_UL, uint32_t, ldl, 4, uint32_t, uint32_t, ADDR_ADD, true) DO_VLDR64_SG(vldrd_sg_wb_ud, ADDR_ADD, true) -DO_VSTR_SG(vstrw_sg_wb_uw, MO_TE | MO_UL, stl, 4, uint32_t, ADDR_ADD, true) +DO_VSTR_SG(vstrw_sg_wb_uw, MO_UL, stl, 4, uint32_t, ADDR_ADD, true) DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) /* -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++++ target/arm/tcg/mve_helper.c | 3 ++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" #include "exec/vaddr.h" #include "exec/breakpoint.h" +#include "exec/memop.h" #include "accel/tcg/tb-cpu-state.h" #include "hw/core/registerfields.h" #include "tcg/tcg-gvec-desc.h" @@ -XXX,XX +XXX,XX @@ #define BANK_HYP 6 #define BANK_MON 7 +static inline MemOp mo_endian(CPUARMState *env) +{ + return EX_TBFLAG_ANY(env->hflags, BE_DATA) ? MO_BE : MO_LE; +} + static inline int arm_env_mmu_index(CPUARMState *env) { return EX_TBFLAG_ANY(env->hflags, MMUIDX); diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/mve_helper.c | 47 +++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 17 deletions(-) diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t eci_mask = mve_eci_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ /* \ * R_SXTM allows the dest reg to become UNKNOWN for abandoned \ @@ -XXX,XX +XXX,XX @@ static void mve_advance_vpt(CPUARMState *env) uint16_t mask = mve_element_mask(env); \ unsigned b, e; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (b = 0, e = 0; b < 16; b += ESIZE, e++) { \ if (mask & (1 << b)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MFLAG | MO_ALIGN, \ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MFLAG | MO_ALIGN, \ mmu_idx); \ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE, eci_mask >>= ESIZE) { \ if (!(eci_mask & 1)) { \ @@ -XXX,XX +XXX,XX @@ DO_VSTR(vstrh_w, MO_UW, 2, stw, 4, int32_t) unsigned e; \ uint32_t addr; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (e = 0; e < 16 / 4; e++, mask >>= 4, eci_mask >>= 4) { \ if (!(eci_mask & 1)) { \ continue; \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VSTR64_SG(vstrd_sg_wb_ud, ADDR_ADD, true) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD4W(vld43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) static const uint8_t off[4] = { O1, O2, O3, O4 }; \ uint32_t addr, data; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) int y; /* y counts 0 2 0 2 */ \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0, y = 0; beat < 4; beat++, mask >>= 4, y ^= 2) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VLD2W(vld21w, 8, 12, 16, 20) uint32_t *qd; \ int y; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint8_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) int e; \ uint16_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ @@ -XXX,XX +XXX,XX @@ DO_VST4W(vst43w, 6, 7, 8, 9) uint32_t addr, data; \ uint32_t *qd; \ int mmu_idx = arm_to_core_mmu_idx(arm_mmu_idx(env)); \ - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, mmu_idx);\ + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, \ + mmu_idx); \ for (beat = 0; beat < 4; beat++, mask >>= 4) { \ if ((mask & 1) == 0) { \ /* ECI says skip this beat */ \ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/meson.build | 3 ++- target/arm/tcg/mve_helper.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c')) arm_ss.add(files( 'cpu32.c', 'm_helper.c', - 'mve_helper.c', )) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( @@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add( 'debug.c', 'hflags.c', 'gengvec.c', + 'mve_helper.c', 'neon_helper.c', 'op_helper.c', 'psci.c', @@ -XXX,XX +XXX,XX @@ arm_user_ss.add( 'debug.c', 'gengvec.c', 'hflags.c', + 'mve_helper.c', 'neon_helper.c', 'op_helper.c', 'tlb_helper.c', diff --git a/target/arm/tcg/mve_helper.c b/target/arm/tcg/mve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mve_helper.c +++ b/target/arm/tcg/mve_helper.c @@ -XXX,XX +XXX,XX @@ #include "helper-mve.h" #include "internals.h" #include "vec_internal.h" -#include "accel/tcg/cpu-ldst.h" +#include "accel/tcg/cpu-ldst-common.h" #include "tcg/tcg.h" #include "fpu/softfloat.h" #include "crypto/clmul.h" -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) /* Note that these stores can throw exceptions on MPU faults */ ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); cpu_stl_mmu(env, sp, nextinst, oi, GETPC()); cpu_stl_mmu(env, sp + 4, saved_psr, oi, GETPC()); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); assert(env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) ARMCPU *cpu = env_archcpu(env); uintptr_t ra = GETPC(); ARMMMUIdx mmu_idx = arm_mmu_idx(env); - MemOpIdx oi = make_memop_idx(MO_TE | MO_UL | MO_ALIGN, + MemOpIdx oi = make_memop_idx(mo_endian(env) | MO_UL | MO_ALIGN, arm_to_core_mmu_idx(mmu_idx)); /* fptr is the value of Rn, the frame pointer we load the FP regs from */ -- 2.43.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260414005348.4767-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/m_helper.c | 2 +- target/arm/tcg/meson.build | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/m_helper.c b/target/arm/tcg/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/m_helper.c +++ b/target/arm/tcg/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "exec/page-protection.h" #ifdef CONFIG_TCG -#include "accel/tcg/cpu-ldst.h" +#include "accel/tcg/cpu-ldst-common.h" #include "semihosting/common-semi.h" #endif #if !defined(CONFIG_USER_ONLY) diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/meson.build +++ b/target/arm/tcg/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_false: files('stubs32.c')) arm_ss.add(files( 'cpu32.c', - 'm_helper.c', )) arm_ss.add(when: 'TARGET_AARCH64', if_true: files( @@ -XXX,XX +XXX,XX @@ arm_common_system_ss.add( 'debug.c', 'hflags.c', 'gengvec.c', + 'm_helper.c', 'mve_helper.c', 'neon_helper.c', 'op_helper.c', @@ -XXX,XX +XXX,XX @@ arm_user_ss.add( 'debug.c', 'gengvec.c', 'hflags.c', + 'm_helper.c', 'mve_helper.c', 'neon_helper.c', 'op_helper.c', -- 2.43.0 From: Thomas Huth <thuth@redhat.com> When writing to this register, QEMU currently aborts: $ echo "readl 0x10000018" | ./qemu-system-arm -audiodev none,id=snd0 \ -M integratorcp,accel=qtest,audiodev=snd0 -display none -qtest stdio [I 0.000000] OPENED [R +0.001907] readl 0x10000018 qemu: hardware error: integratorcm_read: CM_LMBUSCNT [...] Aborted (core dumped) This is bad, a guest should ideally never be able to kill QEMU like this. Now, according to the "Intergrator/CP User Guide" from: https://developer.arm.com/documentation/dui0159/b/porting-integrator-ap-and-im-pd1/registers "The Integrator/AP CM_LMBUSCNT has been removed." That means this register does not seem to be implemented on real CP boards at all, only for older AP boards. Thus it should be fine if we simply ignore this register in QEMU and handle it like all other unimplemented registers in the "default" handler of the case statement. Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/3407 Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260420064933.64765-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/integratorcp.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ static uint64_t integratorcm_read(void *opaque, hwaddr offset, } else { return s->cm_lock; } - case 6: /* CM_LMBUSCNT */ - /* ??? High frequency timer. */ - hw_error("integratorcm_read: CM_LMBUSCNT"); case 7: /* CM_AUXOSC */ return s->cm_auxosc; case 8: /* CM_SDRAM */ -- 2.43.0 include/hw/arm/primecell.h used to be more expansive, but now the only thing it defines is the ARM_SYSCTL_GPIO_* constants for the GPIO lines for the arm-sysctl system-control device used on the Realview, Versatile and Versatile Express boards. Replace it with a header file specific to that device. virt.c and vmapple.c included primecell.h despite not using the constants it defined; there we can simply drop the include entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416172627.690396-1-peter.maydell@linaro.org --- MAINTAINERS | 2 +- hw/arm/realview.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 1 - hw/misc/arm_sysctl.c | 2 +- hw/vmapple/vmapple.c | 1 - include/hw/arm/primecell.h | 12 ------------ include/hw/misc/arm_sysctl.h | 16 ++++++++++++++++ 8 files changed, 20 insertions(+), 18 deletions(-) delete mode 100644 include/hw/arm/primecell.h create mode 100644 include/hw/misc/arm_sysctl.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/ssi/pl022.c F: include/hw/ssi/pl022.h F: hw/rtc/pl031.c F: include/hw/rtc/pl031.h -F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ F: hw/*/versatile* F: hw/i2c/arm_sbcon_i2c.c F: include/hw/i2c/arm_sbcon_i2c.h F: hw/misc/arm_sysctl.c +F: include/hw/misc/arm_sysctl.h F: docs/system/arm/versatile.rst Virt diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "target/arm/cpu.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/machines-qom.h" #include "hw/core/split-irq.h" +#include "hw/misc/arm_sysctl.h" #include "hw/net/lan9118.h" #include "hw/net/smc91c111.h" #include "hw/pci/pci.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "qemu/datadir.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/machines-qom.h" +#include "hw/misc/arm_sysctl.h" #include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ #include "monitor/qdev.h" #include "hw/core/sysbus.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/arm/virt.h" #include "hw/arm/machines-qom.h" #include "hw/block/flash.h" diff --git a/hw/misc/arm_sysctl.c b/hw/misc/arm_sysctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/arm_sysctl.c +++ b/hw/misc/arm_sysctl.c @@ -XXX,XX +XXX,XX @@ #include "system/runstate.h" #include "qemu/bitops.h" #include "hw/core/sysbus.h" +#include "hw/misc/arm_sysctl.h" #include "migration/vmstate.h" -#include "hw/arm/primecell.h" #include "qemu/log.h" #include "qemu/module.h" #include "qom/object.h" diff --git a/hw/vmapple/vmapple.c b/hw/vmapple/vmapple.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vmapple/vmapple.c +++ b/hw/vmapple/vmapple.c @@ -XXX,XX +XXX,XX @@ #include "hw/core/sysbus.h" #include "hw/usb/usb.h" #include "hw/arm/boot.h" -#include "hw/arm/primecell.h" #include "hw/char/pl011.h" #include "hw/intc/arm_gic.h" #include "hw/intc/arm_gicv3_common.h" diff --git a/include/hw/arm/primecell.h b/include/hw/arm/primecell.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/arm/primecell.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef PRIMECELL_H -#define PRIMECELL_H - -/* Declarations for ARM PrimeCell based periperals. */ -/* Also includes some devices that are currently only used by the - ARM boards. */ - -/* arm_sysctl GPIO lines */ -#define ARM_SYSCTL_GPIO_MMC_WPROT 0 -#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 - -#endif diff --git a/include/hw/misc/arm_sysctl.h b/include/hw/misc/arm_sysctl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/arm_sysctl.h @@ -XXX,XX +XXX,XX @@ +/* + * Status and system control registers for ARM RealView/Versatile boards. + * + * Copyright (c) Linaro Ltd + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef HW_MISC_ARM_SYSCTL_H +#define HW_MISC_ARM_SYSCTL_H + +/* arm_sysctl inbound GPIO lines */ +#define ARM_SYSCTL_GPIO_MMC_WPROT 0 +#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 + +#endif -- 2.43.0 If we create a normally-AArch64 CPU and configure it with aarch64=off, this will by default leave all the AArch64 ID register values in its ARMISARegisters struct untouched. That in turn means that tests of cpu_isar_feature(aa64_something, cpu) will return true. Until now we have had a design policy that you shouldn't check an aa64_ feature unless you know that the CPU has AArch64; but this is quite fragile as it's easy to forget and only causes a problem in the corner case where AArch64 was turned off. In particular, when we extend the ability to disable AArch64 from only KVM to also TCG there are many more aa64 feature check points which we would otherwise have to audit for whether they needed to be guarded with a check on ARM_FEATURE_AARCH64. Instead, make the CPU realize function zero out all the 64-bit ID registers if a TCG CPU doesn't have AArch64; this will make aa64_ feature tests generally return false. We only do this for TCG because only TCG really needs it, and for KVM it might be confusing to have QEMU's idea of the ID registers be different from KVM's. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20260416165353.589569-2-peter.maydell@linaro.org --- target/arm/cpu.c | 35 +++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 3 ++- 2 files changed, 37 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp) } } +static void arm_clear_aarch64_idregs(ARMCPU *cpu) +{ + /* Zero out all the AArch64 ID registers in ARMISARegisters */ + SET_IDREG(&cpu->isar, ID_AA64ISAR0, 0); + SET_IDREG(&cpu->isar, ID_AA64ISAR1, 0); + SET_IDREG(&cpu->isar, ID_AA64ISAR2, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64PFR2, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR2, 0); + SET_IDREG(&cpu->isar, ID_AA64MMFR3, 0); + SET_IDREG(&cpu->isar, ID_AA64DFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64DFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64AFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64AFR1, 0); + SET_IDREG(&cpu->isar, ID_AA64ZFR0, 0); + SET_IDREG(&cpu->isar, ID_AA64SMFR0, 0); +} + static void arm_cpu_realizefn(DeviceState *dev, Error **errp) { CPUState *cs = CPU(dev); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } #endif + /* + * A TCG aarch64=off CPU has no AArch64 at all, so we clear out the + * ID registers to avoid cpu_isar_feature(aa64_something, cpu) tests + * incorrectly returning true. We don't do this for other accelerators + * (which in practice means "for KVM", since no others have AArch32 + * guest support) because from KVM's point of view the AArch64 ID + * registers still exist and must have their correct values. So we + * avoid clearing them out so that we don't have QEMU and KVM with + * different ideas of the ID registers. + */ + if (tcg_enabled() && !arm_feature(env, ARM_FEATURE_AARCH64)) { + arm_clear_aarch64_idregs(cpu); + } + #ifdef CONFIG_USER_ONLY /* * User mode relies on IC IVAU instructions to catch modification of diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { * Note that if you add an ID register to the ARMISARegisters struct * you need to also update the 32-bit and 64-bit versions of the * kvm_arm_get_host_cpu_features() function to correctly populate the - * field by reading the value from the KVM vCPU. + * field by reading the value from the KVM vCPU. If it is an AArch64 + * ID register then you also must update arm_clear_aarch64_idregs(). */ struct ARMISARegisters { uint32_t mvfr0; -- 2.43.0 Allow the 'aarch64=off' property, which is currently KVM-only, to be set for TCG CPUs also. Note that we don't permit it on the qemu-aarch64 user-mode binary: this makes no sense as that executable can only handle AArch64 syscalls (and it would also assert at startup since it doesn't compile in the A32-specific GDB xml files like arm-neon.xml). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Clément Chigot <chigot@adacore.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416165353.589569-3-peter.maydell@linaro.org --- docs/system/arm/cpu-features.rst | 10 +++++---- target/arm/cpu-features.h | 5 +++++ target/arm/cpu.c | 36 ++++++++++++++++++++++++++++---- tests/qtest/arm-cpu-features.c | 8 ++----- 4 files changed, 45 insertions(+), 14 deletions(-) diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cpu-features.rst +++ b/docs/system/arm/cpu-features.rst @@ -XXX,XX +XXX,XX @@ not implement ARMv8-A, will not have the ``aarch64`` CPU property. QEMU's support may be limited for some CPU features, only partially supporting the feature or only supporting the feature under certain configurations. For example, the ``aarch64`` CPU feature, which, when -disabled, enables the optional AArch32 CPU feature, is only supported -when using the KVM accelerator and when running on a host CPU type that -supports the feature. While ``aarch64`` currently only works with KVM, -it could work with TCG. CPU features that are specific to KVM are +disabled, enables the optional AArch32 CPU feature, can only be set to +``off`` on the TCG and KVM accelerators, and it cannot be set to +``off`` under KVM unless running on a host CPU type that supports +running guests in AArch32. + +CPU features that are inherently specific to KVM are prefixed with "kvm-" and are described in "KVM VCPU Features". CPU Feature Probing diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-features.h +++ b/target/arm/cpu-features.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_aa32_el2(const ARMISARegisters *id) return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL2) >= 2; } +static inline bool isar_feature_aa64_aa32_el3(const ARMISARegisters *id) +{ + return FIELD_EX64_IDREG(id, ID_AA64PFR0, EL3) >= 2; +} + static inline bool isar_feature_aa64_ras(const ARMISARegisters *id) { return FIELD_EX64_IDREG(id, ID_AA64PFR0, RAS) != 0; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_set_aarch64(Object *obj, bool value, Error **errp) * uniform execution state like do_interrupt. */ if (value == false) { - if (!kvm_enabled() || !kvm_arm_aarch32_supported()) { - error_setg(errp, "'aarch64' feature cannot be disabled " - "unless KVM is enabled and 32-bit EL1 " - "is supported"); + if (kvm_enabled()) { + if (!kvm_arm_aarch32_supported()) { + error_setg(errp, "'aarch64' feature cannot be disabled for KVM " + "because this host does not support 32-bit EL1"); + return; + } + } else if (tcg_enabled()) { +#ifdef CONFIG_USER_ONLY + error_setg(errp, "'aarch64' feature cannot be disabled for " + "usermode emulator qemu-aarch64; use qemu-arm instead"); + return; +#else + bool aa32_at_highest_el; + if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el3, cpu); + } else if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el2, cpu); + } else { + aa32_at_highest_el = cpu_isar_feature(aa64_aa32_el1, cpu); + } + + if (!aa32_at_highest_el) { + error_setg(errp, "'aarch64' feature cannot be disabled for " + "this TCG CPU because it does not support 32-bit " + "execution at its highest implemented exception " + "level"); + return; + } +#endif + } else { + error_setg(errp, "'aarch64' feature cannot be disabled for " + "this accelerator"); return; } unset_feature(&cpu->env, ARM_FEATURE_AARCH64); diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) sve_tests_default(qts, "max"); pauth_tests_default(qts, "max"); - /* Test that features that depend on KVM generate errors without. */ - assert_error(qts, "max", - "'aarch64' feature cannot be disabled " - "unless KVM is enabled and 32-bit EL1 " - "is supported", - "{ 'aarch64': false }"); + /* TCG allows us to turn off AArch64 on the 'max' CPU type */ + assert_set_feature(qts, "max", "aarch64", false); } qtest_quit(qts); -- 2.43.0 Add a basic test of the TCG 'aarch64=off' functionality; this is the same as our existing arm/test_virt test, but it runs the AArch32 guest kernel on qemu-system-aarch64 with -cpu max,aarch64=off. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260416165353.589569-4-peter.maydell@linaro.org --- tests/functional/aarch64/meson.build | 1 + .../aarch64/test_virt_aarch64_off.py | 37 +++++++++++++++++++ 2 files changed, 38 insertions(+) create mode 100755 tests/functional/aarch64/test_virt_aarch64_off.py diff --git a/tests/functional/aarch64/meson.build b/tests/functional/aarch64/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/functional/aarch64/meson.build +++ b/tests/functional/aarch64/meson.build @@ -XXX,XX +XXX,XX @@ tests_aarch64_system_thorough = [ 'tcg_plugins', 'tuxrun', 'virt', + 'virt_aarch64_off', 'virt_gpu', 'virt_vbsa', 'xen', diff --git a/tests/functional/aarch64/test_virt_aarch64_off.py b/tests/functional/aarch64/test_virt_aarch64_off.py new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/functional/aarch64/test_virt_aarch64_off.py @@ -XXX,XX +XXX,XX @@ +#!/usr/bin/env python3 +# +# Functional test that boots an AArch32 Linux kernel and checks the console +# on a TCG aarch64 CPU with aarch64=off. This is the same image etc +# as we use in tests/functional/arm/test_virt.py. +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import LinuxKernelTest, Asset + +class ArmVirtMachine(LinuxKernelTest): + + ASSET_KERNEL = Asset( + ('https://archives.fedoraproject.org/pub/archive/fedora/linux/' + 'releases/29/Everything/armhfp/os/images/pxeboot/vmlinuz'), + '18dd5f1a9a28bd539f9d047f7c0677211bae528e8712b40ca5a229a4ad8e2591') + + def test_arm_virt(self): + self.set_machine('virt') + # KVM aarch64=off requires a host CPU that supports it, so + # restrict the test to TCG only + self.require_accelerator('tcg') + self.vm.add_args('-cpu', 'max,aarch64=off') + + kernel_path = self.ASSET_KERNEL.fetch() + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyAMA0') + self.vm.add_args('-kernel', kernel_path, + '-append', kernel_command_line) + self.vm.launch() + console_pattern = 'Kernel command line: %s' % kernel_command_line + self.wait_for_console_pattern(console_pattern) + +if __name__ == '__main__': + LinuxKernelTest.main() -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> We introduce a datatype for a tolerance with respect to a given cpreg migration issue. The tolerance applies to a given cpreg kvm index, and can be of different types: a) mismatch in cpreg indexes - ToleranceNotOnBothEnds (cpreg index is allowed to be only present on one end) - ToleranceOnlySrcTestValue (cpreg index is allowed to be only present in source if its value @mask field matches @value) b) mismatch in cpreg values - ToleranceDiffInMask (value differences are allowed only within a mask) - ToleranceFieldLT (incoming field value must be less than a given value) - ToleranceFieldGT (incoming field value must be greater than a given value) A QLIST of such tolerances can be populated using a new helper: arm_register_cpreg_mig_tolerance() and arm_cpu_match_cpreg_mig_tolerance() allows to check whether a tolerance exists for a given kvm index and its criterion is matched. callers for those helpers will be introduced in subsequent patches. Only registration of migration tolerances related to cpreg index mismatch is currently allowed. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20260420140552.104369-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 82 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 1 + target/arm/internals.h | 54 ++++++++++++++++++++++++++++ 3 files changed, 137 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, QLIST_INSERT_HEAD(&cpu->el_change_hooks, entry, node); } +static ARMCPRegMigTolerance *find_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx) +{ + ARMCPRegMigTolerance *t; + QLIST_FOREACH(t, &cpu->cpreg_mig_tolerances, node) { + if (t->kvmidx == kvmidx) { + return t; + } + } + return NULL; +} + +void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t mask, uint64_t value, + ARMCPRegMigToleranceType type) +{ + ARMCPRegMigTolerance *entry; + + /* make sure the kvmidx has not tolerance already registered */ + assert(!find_mig_tolerance(cpu, kvmidx)); + + assert(type == ToleranceNotOnBothEnds || + type == ToleranceOnlySrcTestValue); + + entry = g_new0(ARMCPRegMigTolerance, 1); + + entry->kvmidx = kvmidx; + entry->mask = mask; + entry->value = value; + entry->type = type; + + QLIST_INSERT_HEAD(&cpu->cpreg_mig_tolerances, entry, node); +} + +bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t vmstate_value, uint64_t local_value, + ARMCPRegMigToleranceType type) +{ + ARMCPRegMigTolerance *t = find_mig_tolerance(cpu, kvmidx); + uint64_t diff, diff_outside_mask, field; + + if (!t || t->type != type) { + return false; + } + + if (type == ToleranceNotOnBothEnds) { + return true; + } + + if (type == ToleranceOnlySrcTestValue && + ((vmstate_value & t->mask) == t->value)) { + return true; + } + + /* Need to check the mask */ + diff = vmstate_value ^ local_value; + diff_outside_mask = diff & ~t->mask; + + if (diff_outside_mask) { + /* there are differences outside of the mask */ + return false; + } + if (type == ToleranceDiffInMask) { + /* differences only in the field, tolerance matched */ + return true; + } + /* need to compare field value against authorized ones */ + field = vmstate_value & t->mask; + if (type == ToleranceFieldLT && (field < t->value)) { + return true; + } + if (type == ToleranceFieldGT && (field > t->value)) { + return true; + } + return false; +} + static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) { /* Reset a single ARMCPRegInfo register */ @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) QLIST_INIT(&cpu->pre_el_change_hooks); QLIST_INIT(&cpu->el_change_hooks); + QLIST_INIT(&cpu->cpreg_mig_tolerances); #ifdef CONFIG_USER_ONLY # ifdef TARGET_AARCH64 @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); ARMELChangeHook *hook, *next; + ARMCPRegMigTolerance *t, *n; g_hash_table_destroy(cpu->cp_regs); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) QLIST_REMOVE(hook, node); g_free(hook); } + QLIST_FOREACH_SAFE(t, &cpu->cpreg_mig_tolerances, node, n) { + QLIST_REMOVE(t, node); + g_free(t); + } #ifndef CONFIG_USER_ONLY if (cpu->pmu_timer) { timer_free(cpu->pmu_timer); diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks; QLIST_HEAD(, ARMELChangeHook) el_change_hooks; + QLIST_HEAD(, ARMCPRegMigTolerance) cpreg_mig_tolerances; int32_t node_id; /* NUMA node this CPU belongs to */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ int compare_u64(const void *a, const void *b); /* Used in FEAT_MEC to set the MECIDWidthm1 field in the MECIDR_EL2 register. */ #define MECID_WIDTH 16 +typedef enum { + ToleranceNotOnBothEnds, + ToleranceOnlySrcTestValue, + ToleranceDiffInMask, + ToleranceFieldLT, + ToleranceFieldGT, +} ARMCPRegMigToleranceType; + +typedef struct ARMCPRegMigTolerance { + uint64_t kvmidx; + uint64_t mask; + uint64_t value; + ARMCPRegMigToleranceType type; + QLIST_ENTRY(ARMCPRegMigTolerance) node; +} ARMCPRegMigTolerance; + +/** + * arm_register_cpreg_mig_tolerance: + * Register a migration tolerance wrt one given cpreg identified by its + * @kvmidx. Calling this function twice for the same @kvmidx is a + * programming error and will cause an assertion failure. + * + * @cpu: vcpu to apply the migration tolerance on + * @kvmidx: kvm index of the cpreg the tolerance applies to + * @mask: bitmask where a difference is tolerated + * (relevant with ToleranceDiffInMask) + * @value: value the bitmask field is compared with + * (relevant with ToleranceFieldLT and ToleranceFieldGT) + * @type: type of the migration tolerance: + * - ToleranceNotOnBothEnds (cpreg index is allowed to be only present + * on one end) + * - ToleranceOnlySrcTestValue (cpreg index is allowed to be only + * present in source if its value @mask field matches @value) + * - ToleranceDiffInMask (mismatch in cpreg values are only tolerated + * if differences are within @mask) + * - ToleranceFieldLT (mismatch in cpreg values are only tolerated + * if incoming @bitmask field value is less than @value) + * - ToleranceFieldGT (mismatch in cpreg values are only tolerated + * if incoming @bitmask field value is greater than @value) + */ +void arm_register_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t mask, uint64_t value, + ARMCPRegMigToleranceType type); + +/** + * arm_cpu_match_cpreg_mig_tolerance: + * Check whether a tolerance of type @type exists for a given @kvmidx + * and the tolerance criterion is satisfied + */ +bool arm_cpu_match_cpreg_mig_tolerance(ARMCPU *cpu, uint64_t kvmidx, + uint64_t vmstate_value, uint64_t local_value, + ARMCPRegMigToleranceType type); + + #endif -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> If there is a mismatch between the cpreg indexes found on both ends, check whether a tolerance was registered for the given kvmidx. If any, silence warning/errors. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 21 +++++++++++++++------ target/arm/trace-events | 2 ++ 2 files changed, 17 insertions(+), 6 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx { g_autofree gchar *name = print_register_name(kvmidx); + if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + 0, 0, ToleranceNotOnBothEnds)) { + trace_tolerate_cpreg_missing_in_incoming_stream(name); + return; + } warn_report("%s: %s " "expected by the destination but not in the incoming stream: " "skip it", __func__, name); } /* - * Handle the situation where @kvmidx is in the incoming stream - * but not on destination. This currently fails the migration but - * we plan to accomodate some exceptions, hence the boolean returned value. + * Handle the situation where @kvmidx is in the incoming + * stream but not on destination. This fails the migration if + * no cpreg mig tolerance is matched for this @kvmidx + * Return true if the migration should eventually fail */ static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx) { g_autofree gchar *name = print_register_name(kvmidx); - bool fail = true; + if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + 0, 0, ToleranceNotOnBothEnds)) { + trace_tolerate_cpreg_only_in_incoming_stream(name); + return false; + } error_report("%s: %s in the incoming stream but unknown on the " "destination: fail migration", __func__, name); - - return fail; + return true; } static int cpu_post_load(void *opaque, int version_id) diff --git a/target/arm/trace-events b/target/arm/trace-events index XXXXXXX..XXXXXXX 100644 --- a/target/arm/trace-events +++ b/target/arm/trace-events @@ -XXX,XX +XXX,XX @@ arm_psci_call(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3, uint32_t cpuid # machine.c cpu_post_load(uint32_t cpreg_vmstate_array_len, uint32_t cpreg_array_len) "cpreg_vmstate_array_len=%d cpreg_array_len=%d" +tolerate_cpreg_missing_in_incoming_stream(char *name) "%s is missing in incoming stream but this is explicitly tolerated" +tolerate_cpreg_only_in_incoming_stream(char *name) "%s is in incoming stream but not on destination but this is explicitly tolerated" -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> Pass the value of the incoming register to handle_cpreg_only_in_incoming_stream and check whether there is a matching ToleranceOnlySrcTestValue tolerance. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20260420140552.104369-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static void handle_cpreg_missing_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx * no cpreg mig tolerance is matched for this @kvmidx * Return true if the migration should eventually fail */ -static bool handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx) +static bool +handle_cpreg_only_in_incoming_stream(ARMCPU *cpu, uint64_t kvmidx, uint64_t value) { g_autofree gchar *name = print_register_name(kvmidx); if (arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, - 0, 0, ToleranceNotOnBothEnds)) { + 0, 0, ToleranceNotOnBothEnds) || + arm_cpu_match_cpreg_mig_tolerance(cpu, kvmidx, + value, 0, ToleranceOnlySrcTestValue)) { trace_tolerate_cpreg_only_in_incoming_stream(name); return false; } @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } if (cpu->cpreg_vmstate_indexes[v] < cpu->cpreg_indexes[i]) { fail = handle_cpreg_only_in_incoming_stream(cpu, - cpu->cpreg_vmstate_indexes[v++]); + cpu->cpreg_vmstate_indexes[v], + cpu->cpreg_vmstate_values[v]); + v++; continue; } /* matching register, copy the value over */ @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) */ for ( ; v < cpu->cpreg_vmstate_array_len; v++) { fail = handle_cpreg_only_in_incoming_stream(cpu, - cpu->cpreg_vmstate_indexes[v]); + cpu->cpreg_vmstate_indexes[v], + cpu->cpreg_vmstate_values[v]); } if (fail) { return -1; -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> Before linux v6.13 those registers were erroneously unconditionally exposed and this was fixed by commits: - 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace when disabled for guests") - a68cddbe47ef ("KVM: arm64: Hide S1PIE registers from userspace when disabled for guests") in v6.13. This means if we migrate from an old kernel host to a >= 6.13 kernel host, migration currently fails. Declare cpreg migration tolerance for those registers. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-5-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) define_cortex_a72_a57_a53_cp_reginfo(cpu); } +#if defined(CONFIG_KVM) +static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu) +{ + /* + * Registers that may be in the incoming stream and not exposed + * on the destination + */ + + /* + * TCR_EL1 was erroneously unconditionnally exposed before linux v6.13. + * See commit 0fcb4eea5345 ("KVM: arm64: Hide TCR2_EL1 from userspace + * when disabled for guests") + */ + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 2, 0, 3), + 0, 0, ToleranceNotOnBothEnds); + /* + * PIRE0_EL1 and PIR_EL1 were erroneously unconditionnally exposed + * before linux v6.13. See commit a68cddbe47ef ("KVM: arm64: Hide + * S1PIE registers from userspace when disabled for guests") + */ + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 2), + 0, 0, ToleranceNotOnBothEnds); + arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3), + 0, 0, ToleranceNotOnBothEnds); +} +#endif + static void aarch64_host_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_host_initfn(Object *obj) #endif #if defined(CONFIG_KVM) + kvm_arm_set_cpreg_mig_tolerances(cpu); kvm_arm_set_cpu_features_from_host(cpu); aarch64_add_sve_properties(obj); #elif defined(CONFIG_HVF) -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed from v6.15 onwards. Backward migration from a >= v6.15 to an older kernel would fail without cpreg migration tolerance definition for this register. If the register is present on source but not on destination, its value must be checked to make sure it matches the reset value, ie. 0, meaning no service is exposed to the guest, hence the choice of a ToleranceOnlySrcTestValue migration tolerance. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-6-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_set_cpreg_mig_tolerances(ARMCPU *cpu) 0, 0, ToleranceNotOnBothEnds); arm_register_cpreg_mig_tolerance(cpu, ARM64_SYS_REG(3, 0, 10, 2, 3), 0, 0, ToleranceNotOnBothEnds); + + /* + * KVM_REG_ARM_VENDOR_HYP_BMAP_2 pseudo FW register is exposed + * from v6.15 onwards. Backward migration from a >= v6.15 to an older + * kernel would fail without cpreg migration tolerance definition. + * If the register is present on source but not on destination, make + * sure it has its reset value, ie. 0, meaning no service is exposed + * to the guest. + */ + arm_register_cpreg_mig_tolerance(cpu, KVM_REG_ARM_FW_FEAT_BMAP_REG(3), + UINT64_MAX, 0, ToleranceOnlySrcTestValue); } #endif -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> We want to remove AArch32 DBGDTRTX which was erroneously exposed. This was attempted by 655659a74a36b ("target/arm: Correct encoding of Debug Communications Channel registers") but it was discovered that the removal of this debug register broke forward migration on TCG. Now we have the cpreg migration tolerance infrastructure, we can declare one for the DBGDTRTX. This allow to revert the reinstate patch. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-7-eric.auger@redhat.com [PMM: revised comment, included note about when we can drop the workaround] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .fgt = FGT_CLIDR_EL1, .resetvalue = GET_IDREG(isar, CLIDR) }; + uint64_t dbgtr_el0_kvmidx = + cpreg_to_kvm_id(ENCODE_CP_REG(14, 0, 1, 0, 5, 3, 0)); + define_one_arm_cp_reg(cpu, &clidr); define_arm_cp_regs(cpu, v7_cp_reginfo); define_debug_regs(cpu); + /* + * We used to incorrectly expose a non-existent AArch32 "DBGDTRTX" + * register with this encoding. This has been fixed by commit + * 655659a74a36 ("target/arm: Correct encoding of Debug + * Communications Channel registers") by the introduction of correct + * separate cpreg definitions for AA64 and AA32 versions. However, + * the old cpreg definition couldn't be removed without breaking + * migration, so commit 4f2b82f604 reinstated the bogus encoding + * for migration data only. + * + * Now that we have migration tolerance infrastructure, we can use + * this to allow forward migration from the buggy QEMU versions, + * accepting and ignoring the bogus register if it is in the + * source data. QEMU 11.0 was the last version that sent the + * bogus encoding, so this workaround can be removed at the point + * where we no longer care about migration from that version + * (i.e. when we remove the "virt-11.0" machine type). + */ + arm_register_cpreg_mig_tolerance(cpu, dbgtr_el0_kvmidx, + 0, 0, ToleranceNotOnBothEnds); } else { define_arm_cp_regs(cpu, not_v7_cp_reginfo); } -- 2.43.0 From: Eric Auger <eric.auger@redhat.com> This reverts commit 4f2b82f60431 ("target/arm: Reinstate bogus AArch32 DBGDTRTX register for migration compat). We don't need that commit anymore as the AArch32 DBGDTRTX register is declared to be safe to ignore in the incoming migration stream. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20260420140552.104369-8-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static void dbgclaimclr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.dbgclaim &= ~(value & 0xFF); } -static CPAccessResult access_bogus(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) -{ - /* Always UNDEF, as if this cpreg didn't exist */ - return CP_ACCESS_UNDEFINED; -} - static const ARMCPRegInfo debug_cp_reginfo[] = { /* * DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 4, .opc2 = 0, .access = PL0_RW, .accessfn = access_tdcc, .type = ARM_CP_CONST, .resetvalue = 0 }, - /* - * This is not a real AArch32 register. We used to incorrectly expose - * this due to a QEMU bug; to avoid breaking migration compatibility we - * need to continue to provide it so that we don't fail the inbound - * migration when it tells us about a sysreg that we don't have. - * We set an always-fails .accessfn, which means that the guest doesn't - * actually see this register (it will always UNDEF, identically to if - * there were no cpreg definition for it other than that we won't print - * a LOG_UNIMP message about it), and we set the ARM_CP_NO_GDB flag so the - * gdbstub won't see it either. - * (We can't just set .access = 0, because add_cpreg_to_hashtable() - * helpfully ignores cpregs which aren't accessible to the highest - * implemented EL.) - * - * TODO: implement a system for being able to describe "this register - * can be ignored if it appears in the inbound stream"; then we can - * remove this temporary hack. - */ - { .name = "BOGUS_DBGDTR_EL0", .state = ARM_CP_STATE_AA32, - .cp = 14, .opc1 = 3, .crn = 0, .crm = 5, .opc2 = 0, - .access = PL0_RW, .accessfn = access_bogus, - .type = ARM_CP_CONST | ARM_CP_NO_GDB, .resetvalue = 0 }, /* * OSECCR_EL1 provides a mechanism for an operating system * to access the contents of EDECCR. EDECCR is not implemented though, -- 2.43.0 From: Osama Abdelkader <osama.abdelkader@gmail.com> fdt_node_offset_by_compatible(fdt, -1, compat) only finds the first match. If the blob has more than one node with the same compatible string, extra nodes will remain active. Remove all the matching nodes, using the same loop as imx8mp-evk.c does for this purpose. Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com> Message-id: 20260420162114.308519-1-osama.abdelkader@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi4b.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi4b.c +++ b/hw/arm/raspi4b.c @@ -XXX,XX +XXX,XX @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt) for (int i = 0; i < ARRAY_SIZE(nodes_to_remove); i++) { const char *dev_str = nodes_to_remove[i]; + int offset; - int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); - if (offset >= 0) { - if (!fdt_nop_node(fdt, offset)) { - warn_report("bcm2711 dtc: %s has been disabled!", dev_str); + offset = fdt_node_offset_by_compatible(fdt, -1, dev_str); + while (offset >= 0) { + if (fdt_nop_node(fdt, offset) == 0) { + warn_report("bcm2711 dtb: %s has been disabled!", dev_str); } + offset = fdt_node_offset_by_compatible(fdt, offset, dev_str); } } -- 2.43.0 From: Yucai Liu <1486344514@qq.com> Implement a basic i.MX6UL LCDIF controller model with MMIO registers, frame-done interrupt behavior, and framebuffer-backed display updates for RGB565 and XRGB8888 input formats. Place the LCDIF device under hw/display and build it via a dedicated CONFIG_IMX6UL_LCDIF symbol. Model register fields with registerfields.h helpers and provide migration support via vmstate. Signed-off-by: Yucai Liu <1486344514@qq.com> Message-id: 20260412110240.93116-2-yangyanglan718@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 + hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++++++++++++++++++ hw/display/meson.build | 1 + include/hw/display/imx6ul_lcdif.h | 37 +++ 5 files changed, 497 insertions(+) create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/display/imx6ul_lcdif.h diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/mcimx6ul-evk.c F: hw/arm/fsl-imx6ul.c +F: hw/display/imx6ul_lcdif.c F: hw/misc/imx6ul_ccm.c F: include/hw/arm/fsl-imx6ul.h +F: include/hw/display/imx6ul_lcdif.h F: include/hw/misc/imx6ul_ccm.h F: docs/system/arm/mcimx6ul-evk.rst diff --git a/hw/display/Kconfig b/hw/display/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/display/Kconfig +++ b/hw/display/Kconfig @@ -XXX,XX +XXX,XX @@ config PL110 bool select FRAMEBUFFER +config IMX6UL_LCDIF + bool + select FRAMEBUFFER + config SII9022 bool depends on I2C diff --git a/hw/display/imx6ul_lcdif.c b/hw/display/imx6ul_lcdif.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/display/imx6ul_lcdif.c @@ -XXX,XX +XXX,XX @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * i.MX6UL LCDIF controller + * + * Copyright (c) 2026 Yucai Liu <1486344514@qq.com> + */ + +#include "qemu/osdep.h" +#include "hw/display/imx6ul_lcdif.h" +#include "hw/core/irq.h" +#include "hw/core/registerfields.h" +#include "hw/display/framebuffer.h" +#include "migration/vmstate.h" +#include "system/address-spaces.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "ui/pixel_ops.h" + +#define LCDIF_MMIO_SIZE (16 * KiB) +#define LCDIF_RESET_CTRL1 0x000f0000 + +REG32(CTRL, 0x00) + FIELD(CTRL, RUN, 0, 1) + FIELD(CTRL, WORD_LENGTH, 8, 2) +REG32(CTRL1, 0x10) + FIELD(CTRL1, CUR_FRAME_DONE_IRQ, 9, 1) + FIELD(CTRL1, CUR_FRAME_DONE_IRQ_EN, 13, 1) + FIELD(CTRL1, BYTE_PACKING_FORMAT, 16, 4) +REG32(V4_TRANSFER_COUNT, 0x30) + FIELD(V4_TRANSFER_COUNT, H_COUNT, 0, 16) + FIELD(V4_TRANSFER_COUNT, V_COUNT, 16, 16) +REG32(V4_CUR_BUF, 0x40) +REG32(V4_NEXT_BUF, 0x50) +REG32(AS_NEXT_BUF, 0x230) + +#define REG_SET 0x4 +#define REG_CLR 0x8 +#define REG_TOG 0xc + +#define CTRL_WORD_LENGTH_16 0 +#define CTRL_WORD_LENGTH_24 3 + +#define FRAME_PERIOD_NS (16 * 1000 * 1000ULL) + +enum IMX6ULLCDIFReg { + IMX6UL_LCDIF_REG_CTRL = A_CTRL >> 4, + IMX6UL_LCDIF_REG_CTRL1 = A_CTRL1 >> 4, + IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT = A_V4_TRANSFER_COUNT >> 4, + IMX6UL_LCDIF_REG_V4_CUR_BUF = A_V4_CUR_BUF >> 4, + IMX6UL_LCDIF_REG_V4_NEXT_BUF = A_V4_NEXT_BUF >> 4, + IMX6UL_LCDIF_REG_AS_NEXT_BUF = A_AS_NEXT_BUF >> 4, +}; + +static inline bool imx6ul_lcdif_reg_exists(hwaddr reg) +{ + return (reg >> 4) < IMX6UL_LCDIF_REGS_NUM; +} + +static inline bool imx6ul_lcdif_reg_has_setclr(hwaddr reg) +{ + switch (reg) { + case A_CTRL: + case A_CTRL1: + return true; + default: + return false; + } +} + +static inline bool imx6ul_lcdif_is_running(IMX6ULLCDIFState *s) +{ + uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL]; + + return FIELD_EX32(ctrl, CTRL, RUN); +} + +static inline bool imx6ul_lcdif_frame_done_pending(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + + return FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ); +} + +static void imx6ul_lcdif_schedule_frame(IMX6ULLCDIFState *s) +{ + int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + timer_mod(s->frame_timer, now + FRAME_PERIOD_NS); +} + +static void imx6ul_lcdif_maybe_schedule_frame(IMX6ULLCDIFState *s) +{ + if (imx6ul_lcdif_is_running(s) && !imx6ul_lcdif_frame_done_pending(s)) { + imx6ul_lcdif_schedule_frame(s); + } else { + timer_del(s->frame_timer); + } +} + +static void imx6ul_lcdif_update_irq(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + bool level = FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ_EN) && + FIELD_EX32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ); + + qemu_set_irq(s->irq, level); +} + +static void imx6ul_lcdif_frame_done(IMX6ULLCDIFState *s) +{ + uint32_t ctrl1 = s->regs[IMX6UL_LCDIF_REG_CTRL1]; + + ctrl1 = FIELD_DP32(ctrl1, CTRL1, CUR_FRAME_DONE_IRQ, 1); + s->regs[IMX6UL_LCDIF_REG_CTRL1] = ctrl1; + imx6ul_lcdif_update_irq(s); +} + +static void imx6ul_lcdif_draw_line_rgb565(void *opaque, uint8_t *dst, + const uint8_t *src, int width, + int dststep) +{ + uint32_t *dst32 = (uint32_t *)dst; + int i; + + for (i = 0; i < width; i++) { + uint16_t pixel = lduw_le_p(src); + uint8_t r = ((pixel >> 11) & 0x1f) << 3; + uint8_t g = ((pixel >> 5) & 0x3f) << 2; + uint8_t b = (pixel & 0x1f) << 3; + + *dst32++ = rgb_to_pixel32(r, g, b); + src += 2; + } +} + +static void imx6ul_lcdif_draw_line_xrgb8888(void *opaque, uint8_t *dst, + const uint8_t *src, int width, + int dststep) +{ + uint32_t *dst32 = (uint32_t *)dst; + int i; + + for (i = 0; i < width; i++) { + uint32_t pixel = ldl_le_p(src); + uint8_t r = (pixel >> 16) & 0xff; + uint8_t g = (pixel >> 8) & 0xff; + uint8_t b = pixel & 0xff; + + *dst32++ = rgb_to_pixel32(r, g, b); + src += 4; + } +} + +static void imx6ul_lcdif_update_display(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + DisplaySurface *surface = qemu_console_surface(s->con); + uint32_t transfer_count = s->regs[IMX6UL_LCDIF_REG_V4_TRANSFER_COUNT]; + uint32_t width = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, H_COUNT); + uint32_t height = FIELD_EX32(transfer_count, V4_TRANSFER_COUNT, V_COUNT); + uint32_t ctrl = s->regs[IMX6UL_LCDIF_REG_CTRL]; + uint32_t frame_base = s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF]; + drawfn fn; + int first = 0; + int last = 0; + int src_width; + + if (!imx6ul_lcdif_is_running(s) || width == 0 || height == 0) { + return; + } + + switch (FIELD_EX32(ctrl, CTRL, WORD_LENGTH)) { + case CTRL_WORD_LENGTH_16: + s->src_bpp = 2; + fn = imx6ul_lcdif_draw_line_rgb565; + break; + case CTRL_WORD_LENGTH_24: + s->src_bpp = 4; + fn = imx6ul_lcdif_draw_line_xrgb8888; + break; + default: + return; + } + + if (surface_width(surface) != width || surface_height(surface) != height) { + qemu_console_resize(s->con, width, height); + surface = qemu_console_surface(s->con); + s->invalidate = true; + } + + src_width = width * s->src_bpp; + if (s->invalidate || s->fb_base != frame_base || + s->src_width != src_width || s->rows != height) { + framebuffer_update_memory_section(&s->fbsection, get_system_memory(), + frame_base, height, src_width); + s->fb_base = frame_base; + s->src_width = src_width; + s->rows = height; + } + + framebuffer_update_display(surface, &s->fbsection, width, height, + src_width, surface_stride(surface), 0, + s->invalidate, fn, s, &first, &last); + if (first >= 0) { + dpy_gfx_update(s->con, 0, first, width, last - first + 1); + } + + s->invalidate = false; +} + +static void imx6ul_lcdif_invalidate_display(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + + s->invalidate = true; +} + +static const GraphicHwOps imx6ul_lcdif_graphic_ops = { + .invalidate = imx6ul_lcdif_invalidate_display, + .gfx_update = imx6ul_lcdif_update_display, +}; + +static void imx6ul_lcdif_frame_timer_cb(void *opaque) +{ + IMX6ULLCDIFState *s = opaque; + + if (!imx6ul_lcdif_is_running(s) || imx6ul_lcdif_frame_done_pending(s)) { + return; + } + + imx6ul_lcdif_frame_done(s); +} + +static uint64_t imx6ul_lcdif_read(void *opaque, hwaddr offset, unsigned size) +{ + IMX6ULLCDIFState *s = opaque; + hwaddr reg = offset & ~0xf; + uint32_t idx; + + assert(size == 4); + assert(!(offset & 0x3)); + assert(offset < LCDIF_MMIO_SIZE); + + idx = reg >> 4; + if (idx >= ARRAY_SIZE(s->regs)) { + return 0; + } + + return s->regs[idx]; +} + +static void imx6ul_lcdif_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + IMX6ULLCDIFState *s = opaque; + hwaddr reg = offset & ~0xf; + uint32_t idx; + uint32_t oldv; + + assert(size == 4); + assert(!(offset & 0x3)); + assert(offset < LCDIF_MMIO_SIZE); + + if (!imx6ul_lcdif_reg_exists(reg)) { + return; + } + + idx = reg >> 4; + oldv = s->regs[idx]; + + switch (offset & 0xf) { + case 0: + s->regs[idx] = (uint32_t)value; + break; + case REG_SET: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv | (uint32_t)value; + break; + case REG_CLR: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv & ~(uint32_t)value; + break; + case REG_TOG: + if (!imx6ul_lcdif_reg_has_setclr(reg)) { + return; + } + s->regs[idx] = oldv ^ (uint32_t)value; + break; + default: + g_assert_not_reached(); + } + + switch (reg) { + case A_CTRL: + if (!FIELD_EX32(oldv, CTRL, RUN) && + FIELD_EX32(s->regs[idx], CTRL, RUN)) { + s->invalidate = true; + graphic_hw_invalidate(s->con); + imx6ul_lcdif_maybe_schedule_frame(s); + break; + } + if (FIELD_EX32(oldv, CTRL, RUN) && + !FIELD_EX32(s->regs[idx], CTRL, RUN)) { + timer_del(s->frame_timer); + } + break; + case A_CTRL1: + if (FIELD_EX32(oldv, CTRL1, CUR_FRAME_DONE_IRQ) && + !FIELD_EX32(s->regs[idx], CTRL1, CUR_FRAME_DONE_IRQ)) { + imx6ul_lcdif_maybe_schedule_frame(s); + } + break; + case A_V4_TRANSFER_COUNT: + s->invalidate = true; + graphic_hw_invalidate(s->con); + break; + case A_V4_CUR_BUF: + s->invalidate = true; + graphic_hw_invalidate(s->con); + break; + case A_V4_NEXT_BUF: + s->regs[IMX6UL_LCDIF_REG_V4_CUR_BUF] = s->regs[idx]; + imx6ul_lcdif_frame_done(s); + s->invalidate = true; + graphic_hw_invalidate(s->con); + imx6ul_lcdif_maybe_schedule_frame(s); + return; + case A_AS_NEXT_BUF: + imx6ul_lcdif_frame_done(s); + imx6ul_lcdif_maybe_schedule_frame(s); + return; + default: + break; + } + + imx6ul_lcdif_update_irq(s); +} + +static const MemoryRegionOps imx6ul_lcdif_ops = { + .read = imx6ul_lcdif_read, + .write = imx6ul_lcdif_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx6ul_lcdif_reset(DeviceState *dev) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + memset(s->regs, 0, sizeof(s->regs)); + s->regs[IMX6UL_LCDIF_REG_CTRL1] = LCDIF_RESET_CTRL1; + s->fb_base = 0; + s->src_width = 0; + s->rows = 0; + s->src_bpp = 0; + s->invalidate = true; + timer_del(s->frame_timer); + imx6ul_lcdif_update_irq(s); +} + +static int imx6ul_lcdif_post_load(void *opaque, int version_id) +{ + IMX6ULLCDIFState *s = opaque; + + s->fb_base = 0; + s->src_width = 0; + s->rows = 0; + s->src_bpp = 0; + s->invalidate = true; + + imx6ul_lcdif_update_irq(s); + if (imx6ul_lcdif_is_running(s) && + !imx6ul_lcdif_frame_done_pending(s) && + !timer_pending(s->frame_timer)) { + imx6ul_lcdif_schedule_frame(s); + } + + return 0; +} + +static const VMStateDescription vmstate_imx6ul_lcdif = { + .name = TYPE_IMX6UL_LCDIF, + .version_id = 1, + .minimum_version_id = 1, + .post_load = imx6ul_lcdif_post_load, + .fields = (const VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMX6ULLCDIFState, IMX6UL_LCDIF_REGS_NUM), + VMSTATE_TIMER_PTR(frame_timer, IMX6ULLCDIFState), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx6ul_lcdif_realize(DeviceState *dev, Error **errp) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, + imx6ul_lcdif_frame_timer_cb, s); + s->invalidate = true; + memory_region_init_io(&s->iomem, OBJECT(dev), &imx6ul_lcdif_ops, s, + TYPE_IMX6UL_LCDIF, LCDIF_MMIO_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); + s->con = graphic_console_init(dev, 0, &imx6ul_lcdif_graphic_ops, s); +} + +static void imx6ul_lcdif_unrealize(DeviceState *dev) +{ + IMX6ULLCDIFState *s = IMX6UL_LCDIF(dev); + + timer_del(s->frame_timer); + timer_free(s->frame_timer); + s->frame_timer = NULL; + + if (s->con) { + graphic_console_close(s->con); + s->con = NULL; + } +} + +static void imx6ul_lcdif_class_init(ObjectClass *klass, const void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx6ul_lcdif_realize; + dc->unrealize = imx6ul_lcdif_unrealize; + dc->vmsd = &vmstate_imx6ul_lcdif; + device_class_set_legacy_reset(dc, imx6ul_lcdif_reset); + dc->desc = "i.MX6UL LCDIF"; +} + +static const TypeInfo imx6ul_lcdif_info = { + .name = TYPE_IMX6UL_LCDIF, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX6ULLCDIFState), + .class_init = imx6ul_lcdif_class_init, +}; + +static void imx6ul_lcdif_register_types(void) +{ + type_register_static(&imx6ul_lcdif_info); +} + +type_init(imx6ul_lcdif_register_types) diff --git a/hw/display/meson.build b/hw/display/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/display/meson.build +++ b/hw/display/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: ['CONFIG_VGA_CIRRUS', 'CONFIG_VGA_ISA'], if_true: files('cir system_ss.add(when: 'CONFIG_G364FB', if_true: files('g364fb.c')) system_ss.add(when: 'CONFIG_JAZZ_LED', if_true: files('jazz_led.c')) system_ss.add(when: 'CONFIG_PL110', if_true: files('pl110.c')) +system_ss.add(when: 'CONFIG_IMX6UL_LCDIF', if_true: files('imx6ul_lcdif.c')) system_ss.add(when: 'CONFIG_SII9022', if_true: files('sii9022.c')) system_ss.add(when: 'CONFIG_SSD0303', if_true: files('ssd0303.c')) system_ss.add(when: 'CONFIG_SSD0323', if_true: files('ssd0323.c')) diff --git a/include/hw/display/imx6ul_lcdif.h b/include/hw/display/imx6ul_lcdif.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/imx6ul_lcdif.h @@ -XXX,XX +XXX,XX @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * i.MX6UL LCDIF controller + * + * Copyright (c) 2026 Yucai Liu <1486344514@qq.com> + */ + +#ifndef IMX6UL_LCDIF_H +#define IMX6UL_LCDIF_H + +#include "hw/core/sysbus.h" +#include "qom/object.h" +#include "qemu/timer.h" +#include "ui/console.h" + +#define TYPE_IMX6UL_LCDIF "imx6ul-lcdif" +#define IMX6UL_LCDIF_REGS_NUM ((0x230 >> 4) + 1) +OBJECT_DECLARE_SIMPLE_TYPE(IMX6ULLCDIFState, IMX6UL_LCDIF) + +struct IMX6ULLCDIFState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + MemoryRegionSection fbsection; + qemu_irq irq; + QemuConsole *con; + QEMUTimer *frame_timer; + uint32_t fb_base; + uint32_t src_width; + uint32_t rows; + uint8_t src_bpp; + bool invalidate; + uint32_t regs[IMX6UL_LCDIF_REGS_NUM]; +}; + +#endif /* IMX6UL_LCDIF_H */ -- 2.43.0 From: Yucai Liu <1486344514@qq.com> Instantiate LCDIF as a child object of the i.MX6UL SoC in init and realize it in the SoC realize path before MMIO/IRQ hookup. Also make FSL_IMX6UL select CONFIG_IMX6UL_LCDIF and map the LCDIF region with a 16 KiB size to match the SoC memory map. Signed-off-by: Yucai Liu <1486344514@qq.com> Message-id: 20260412110240.93116-3-yangyanglan718@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + hw/arm/fsl-imx6ul.c | 12 ++++++++++-- include/hw/arm/fsl-imx6ul.h | 4 +++- 3 files changed, 14 insertions(+), 3 deletions(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL imply I2C_DEVICES select A15MPCORE select IMX + select IMX6UL_LCDIF select IMX_FEC select IMX_I2C select IMX_USBPHY diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "hw/arm/fsl-imx6ul.h" +#include "hw/display/imx6ul_lcdif.h" #include "hw/misc/unimp.h" #include "hw/usb/imx-usb-phy.h" #include "hw/core/boards.h" @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); } + /* + * LCDIF + */ + object_initialize_child(obj, "lcdif", &s->lcdif, TYPE_IMX6UL_LCDIF); + /* * SDHCIs */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) /* * LCD */ - create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, - FSL_IMX6UL_LCDIF_SIZE); + sysbus_realize(SYS_BUS_DEVICE(&s->lcdif), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->lcdif), 0, FSL_IMX6UL_LCDIF_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->lcdif), 0, + qdev_get_gpio_in(gic, FSL_IMX6UL_LCDIF_IRQ)); /* * CSU diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/net/imx_fec.h" #include "hw/usb/chipidea.h" #include "hw/usb/imx-usb-phy.h" +#include "hw/display/imx6ul_lcdif.h" #include "system/memory.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { IMX2WdtState wdt[FSL_IMX6UL_NUM_WDTS]; IMXUSBPHYState usbphy[FSL_IMX6UL_NUM_USB_PHYS]; ChipideaState usb[FSL_IMX6UL_NUM_USBS]; + IMX6ULLCDIFState lcdif; MemoryRegion rom; MemoryRegion caam; MemoryRegion ocram; @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULMemoryMap { FSL_IMX6UL_PXP_SIZE = (16 * KiB), FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, - FSL_IMX6UL_LCDIF_SIZE = 0x100, + FSL_IMX6UL_LCDIF_SIZE = (16 * KiB), FSL_IMX6UL_CSI_ADDR = 0x021C4000, FSL_IMX6UL_CSI_SIZE = 0x100, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> We have a registerfields interface which we can use for defining fields alongside helpers to access them. Define the basic syndrome layout and convert the helpers that take the imm16 data directly. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-2-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 75 ++++++++++++++++++++++++++++++++----------- 1 file changed, 57 insertions(+), 18 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ #ifndef TARGET_ARM_SYNDROME_H #define TARGET_ARM_SYNDROME_H -#include "qemu/bitops.h" +#include "hw/core/registerfields.h" /* Valid Syndrome Register EC field values */ enum arm_exception_class { @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { EC_AA64_BKPT = 0x3c, }; +/* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */ +FIELD(SYNDROME, EC, 26, 6) +FIELD(SYNDROME, IL, 25, 1) +FIELD(SYNDROME, ISS, 0, 25) + typedef enum { SME_ET_AccessTrap, SME_ET_Streaming, @@ -XXX,XX +XXX,XX @@ typedef enum { static inline uint32_t syn_get_ec(uint32_t syn) { - return syn >> ARM_EL_EC_SHIFT; + return FIELD_EX32(syn, SYNDROME, EC); } static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec) { - return deposit32(syn, ARM_EL_EC_SHIFT, ARM_EL_EC_LENGTH, ec); + return FIELD_DP32(syn, SYNDROME, EC, ec); } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_set_ec(uint32_t syn, uint32_t ec) */ static inline uint32_t syn_uncategorized(void) { - return (EC_UNCATEGORIZED << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_UNCATEGORIZED); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } +FIELD(ISS_IMM16, IMM16, 0, 16) + static inline uint32_t syn_aa64_svc(uint32_t imm16) { - return (EC_AA64_SVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_SVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_hvc(uint32_t imm16) { - return (EC_AA64_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_HVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_smc(uint32_t imm16) { - return (EC_AA64_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_SMC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) { - return (EC_AA32_SVC << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); + uint32_t res = syn_set_ec(0, EC_AA32_SVC); + res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_hvc(uint32_t imm16) { - return (EC_AA32_HVC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA32_HVC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_smc(void) { - return (EC_AA32_SMC << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_AA32_SMC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_aa64_bkpt(uint32_t imm16) { - return (EC_AA64_BKPT << ARM_EL_EC_SHIFT) | ARM_EL_IL | (imm16 & 0xffff); + uint32_t res = syn_set_ec(0, EC_AA64_BKPT); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) { - return (EC_AA32_BKPT << ARM_EL_EC_SHIFT) | (imm16 & 0xffff) - | (is_16bit ? 0 : ARM_EL_IL); + uint32_t res = syn_set_ec(0, EC_AA32_BKPT); + res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); + return res; } static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) static inline uint32_t syn_sve_access_trap(void) { - return (EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_SVEACCESSTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) static inline uint32_t syn_illegalstate(void) { - return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_ILLEGALSTATE); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_pcalignment(void) { - return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_PCALIGNMENT); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn) @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gcs_gcsstr(int ra, int rn) static inline uint32_t syn_serror(uint32_t extra) { - return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra; + uint32_t res = syn_set_ec(0, EC_SERROR); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, SYNDROME, ISS, extra); + return res; } static inline uint32_t syn_mop(bool is_set, bool is_setg, int options, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_aa64_sysregtrap and co-processor register trap syndromes to the registerfields API. The co-processor syndromes are split between single and duel register moves. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-3-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 124 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 102 insertions(+), 22 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { /* Generic syndrome encoding layout for HSR and lower 32 bits of ESR_EL2 */ FIELD(SYNDROME, EC, 26, 6) -FIELD(SYNDROME, IL, 25, 1) +FIELD(SYNDROME, IL, 25, 1) /* IL=1 for 32 bit instructions */ FIELD(SYNDROME, ISS, 0, 25) typedef enum { @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_smc(uint32_t imm16) static inline uint32_t syn_aa32_svc(uint32_t imm16, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_AA32_SVC); - res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); return res; } @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_aa64_bkpt(uint32_t imm16) static inline uint32_t syn_aa32_bkpt(uint32_t imm16, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_AA32_BKPT); - res = FIELD_DP32(res, SYNDROME, IL, is_16bit ? 0 : 1); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); res = FIELD_DP32(res, ISS_IMM16, IMM16, imm16); return res; } +/* + * ISS encoding for an exception from MSR, MRS, or System instruction + * in AArch64 state. + */ +FIELD(SYSREG_ISS, ISREAD, 0, 1) /* Direction, 1 is read */ +FIELD(SYSREG_ISS, CRM, 1, 4) +FIELD(SYSREG_ISS, RT, 5, 5) +FIELD(SYSREG_ISS, CRN, 10, 4) +FIELD(SYSREG_ISS, OP1, 14, 3) +FIELD(SYSREG_ISS, OP2, 17, 3) +FIELD(SYSREG_ISS, OP0, 20, 2) + static inline uint32_t syn_aa64_sysregtrap(int op0, int op1, int op2, int crn, int crm, int rt, int isread) { - return (EC_SYSTEMREGISTERTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL - | (op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (rt << 5) - | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_SYSTEMREGISTERTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, SYSREG_ISS, OP0, op0); + res = FIELD_DP32(res, SYSREG_ISS, OP2, op2); + res = FIELD_DP32(res, SYSREG_ISS, OP1, op1); + res = FIELD_DP32(res, SYSREG_ISS, CRN, crn); + res = FIELD_DP32(res, SYSREG_ISS, RT, rt); + res = FIELD_DP32(res, SYSREG_ISS, CRM, crm); + res = FIELD_DP32(res, SYSREG_ISS, ISREAD, isread); + + return res; } +/* + * ISS encoding for an exception from an MCR or MRC access + * (move to/from co-processor) + */ +FIELD(COPROC_ISS, ISREAD, 0, 1) +FIELD(COPROC_ISS, CRM, 1, 4) +FIELD(COPROC_ISS, RT, 5, 5) +FIELD(COPROC_ISS, CRN, 10, 4) +FIELD(COPROC_ISS, OP1, 14, 3) +FIELD(COPROC_ISS, OP2, 17, 3) +FIELD(COPROC_ISS, COND, 20, 4) +FIELD(COPROC_ISS, CV, 24, 1) + static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) { - return (EC_CP14RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP14RTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP2, opc2); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_cp15_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) { - return (EC_CP15RTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc2 << 17) | (opc1 << 14) - | (crn << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP15RTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP2, opc2); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; } +/* + * ISS encoding for an exception from an MCRR or MRRC access + * (move to/from co-processor with 2 regs) + */ +FIELD(COPROC_R2_ISS, ISREAD, 0, 1) +FIELD(COPROC_R2_ISS, CRM, 1, 4) +FIELD(COPROC_R2_ISS, RT, 5, 5) +FIELD(COPROC_R2_ISS, RT2, 10, 5) +FIELD(COPROC_R2_ISS, OP1, 16, 4) +FIELD(COPROC_R2_ISS, COND, 20, 4) +FIELD(COPROC_R2_ISS, CV, 24, 1) + static inline uint32_t syn_cp14_rrt_trap(int cv, int cond, int opc1, int crm, int rt, int rt2, int isread, bool is_16bit) { - return (EC_CP14RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP14RRTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2); + res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, int rt, int rt2, int isread, bool is_16bit) { - return (EC_CP15RRTTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (opc1 << 16) - | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; + uint32_t res = syn_set_ec(0, EC_CP15RRTTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, COPROC_R2_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_R2_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_R2_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_R2_ISS, RT2, rt2); + res = FIELD_DP32(res, COPROC_R2_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_R2_ISS, CRM, crm); + res = FIELD_DP32(res, COPROC_R2_ISS, ISREAD, isread); + + return res; } static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> The syn_simd_access trap was never used so remove it. We should only see the COPROC encoding on v7 architectures. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-4-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, return res; } +/* + * ISS encoding for an exception from an access to a register of + * instruction resulting from the FPEN or TFP traps. + */ +FIELD(FP_ISS, COPROC, 0, 4) /* ARMv7 only */ +FIELD(FP_ISS, COND, 20, 4) +FIELD(FP_ISS, CV, 24, 1) + static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, int coproc) { /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | coproc; -} + uint32_t res = syn_set_ec(0, EC_ADVSIMDFPACCESSTRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); -static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) -{ - /* AArch32 SIMD trap: TA == 1 coproc == 0 */ - return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | (1 << 5); + res = FIELD_DP32(res, FP_ISS, CV, cv); + res = FIELD_DP32(res, FP_ISS, COND, cond); + res = FIELD_DP32(res, FP_ISS, COPROC, coproc); + + return res; } static inline uint32_t syn_sve_access_trap(void) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> For simplicity keep the OP as a two bit field rather than the two interlinked fields in the docs (ERET/ERETA). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-5-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_sve_access_trap(void) } /* + * ISS encoding for an exception from an ERET, ERETAA or ERETAB + * instructions. + * * eret_op is bits [1:0] of the ERET instruction, so: * 0 for ERET, 2 for ERETAA, 3 for ERETAB. */ +FIELD(ERET_ISS, OP, 0, 2) + static inline uint32_t syn_erettrap(int eret_op) { - return (EC_ERETTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | eret_op; + uint32_t res = syn_set_ec(0, EC_ERETTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, ERET_ISS, OP, eret_op); + + return res; } static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-6-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_erettrap(int eret_op) return res; } +/* + * ISS encoding for an exception due to SME functionality + */ +FIELD(SME_ISS, SMTC, 0, 2) + static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) { - return (EC_SMETRAP << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) | etype; + uint32_t res = syn_set_ec(0, EC_SMETRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + res = FIELD_DP32(res, SME_ISS, SMTC, etype); + + return res; } static inline uint32_t syn_pacfail(bool data, int keynumber) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> syn_pactrap is fairly simple as the ISS is all RES0. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-7-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_smetrap(SMEExceptionType etype, bool is_16bit) return res; } +/* + * ISS encoding for a PAC Fail exceptions + */ +FIELD(PACFAIL_ISS, BnA, 0, 1) /* B key or A key */ +FIELD(PACFAIL_ISS, DnI, 1, 1) /* Data or Instruction */ + static inline uint32_t syn_pacfail(bool data, int keynumber) { - int error_code = (data << 1) | keynumber; - return (EC_PACFAIL << ARM_EL_EC_SHIFT) | ARM_EL_IL | error_code; + uint32_t res = syn_set_ec(0, EC_PACFAIL); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, PACFAIL_ISS, DnI, data); + res = FIELD_DP32(res, PACFAIL_ISS, BnA, keynumber); + + return res; } +/* + * ISS encoding for an exception from a trapped Pointer + * Authentication instruction is RES0 + */ static inline uint32_t syn_pactrap(void) { - return (EC_PACTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL; + uint32_t res = syn_set_ec(0, EC_PACTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + return res; } static inline uint32_t syn_btitrap(int btype) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-8-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pactrap(void) return res; } +/* + * ISS encoding for an exception from a Branch Target Identification + * instruction. + */ +FIELD(BTI_ISS, BTYPE, 0, 2) + static inline uint32_t syn_btitrap(int btype) { - return (EC_BTITRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | btype; + uint32_t res = syn_set_ec(0, EC_BTITRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, BTI_ISS, BTYPE, btype); + return res; } static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This is an Armv7 specific syndrome for chips with Jazelle functionality. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-9-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_btitrap(int btype) return res; } +/* + * ISS encoding for trapped BXJ execution + * + * This is an Armv7 encoding. + */ +FIELD(BXJ_ISS, RM, 0, 4) +/* bits 4:19 are Reserved, UNK/SBZP */ +FIELD(BXJ_ISS, COND, 20, 4) +FIELD(BXJ_ISS, CV, 24, 1) + static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) { - return (EC_BXJTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (cv << 24) | (cond << 20) | rm; + uint32_t res = syn_set_ec(0, EC_BXJTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, BXJ_ISS, CV, cv); + res = FIELD_DP32(res, BXJ_ISS, COND, cond); + res = FIELD_DP32(res, BXJ_ISS, RM, rm); + + return res; } static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-10-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) return res; } +/* + * ISS encoding for a Granule Protection Check exception + * + * These are only reported to EL3 + */ +FIELD(GPC_ISS, xFSC, 0, 6) +FIELD(GPC_ISS, WnR, 6, 1) /* Write not Read */ +FIELD(GPC_ISS, S1PTW, 7, 1) +FIELD(GPC_ISS, CM, 8, 1) +FIELD(GPC_ISS, VNCR, 13, 1) +FIELD(GPC_ISS, GPCSC, 14, 6) +FIELD(GPC_ISS, InD, 20, 1) /* Instruction not Data access */ +FIELD(GPC_ISS, S2PTW, 21, 1) + static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, int cm, int s1ptw, int wnr, int fsc) { - return (EC_GPC << ARM_EL_EC_SHIFT) | ARM_EL_IL | (s2ptw << 21) - | (ind << 20) | (gpcsc << 14) | (vncr << 13) | (cm << 8) - | (s1ptw << 7) | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_GPC); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GPC_ISS, S2PTW, s2ptw); + res = FIELD_DP32(res, GPC_ISS, InD, ind); + res = FIELD_DP32(res, GPC_ISS, GPCSC, gpcsc); + res = FIELD_DP32(res, GPC_ISS, VNCR, vncr); + res = FIELD_DP32(res, GPC_ISS, CM, cm); + res = FIELD_DP32(res, GPC_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, GPC_ISS, WnR, wnr); + res = FIELD_DP32(res, GPC_ISS, xFSC, fsc); + + return res; } static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_insn_abort and syn_data_abort_* to the registerfields API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260422125250.1303100-11-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 87 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 74 insertions(+), 13 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_gpc(int s2ptw, int ind, int gpcsc, int vncr, return res; } +/* + * ISS encoding for an exception from an Instruction Abort + * + * (aka instruction abort) + */ +FIELD(IABORT_ISS, IFSC, 0, 6) +FIELD(IABORT_ISS, S1PTW, 7, 1) +FIELD(IABORT_ISS, EA, 9, 1) +FIELD(IABORT_ISS, FnV, 10, 1) /* FAR not Valid */ +FIELD(IABORT_ISS, SET, 11, 2) +FIELD(IABORT_ISS, PFV, 14, 1) +FIELD(IABORT_ISS, TopLevel, 21, 1) /* FEAT_THE */ + static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) { - return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc; + uint32_t res = syn_set_ec(0, EC_INSNABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, IABORT_ISS, EA, ea); + res = FIELD_DP32(res, IABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, IABORT_ISS, IFSC, fsc); + + return res; } +/* + * ISS encoding for an exception from a Data Abort + */ +FIELD(DABORT_ISS, DFSC, 0, 6) +FIELD(DABORT_ISS, WNR, 6, 1) +FIELD(DABORT_ISS, S1PTW, 7, 1) +FIELD(DABORT_ISS, CM, 8, 1) +FIELD(DABORT_ISS, EA, 9, 1) +FIELD(DABORT_ISS, FnV, 10, 1) +FIELD(DABORT_ISS, LST, 11, 2) +FIELD(DABORT_ISS, VNCR, 13, 1) +FIELD(DABORT_ISS, AR, 14, 1) +FIELD(DABORT_ISS, SF, 15, 1) +FIELD(DABORT_ISS, SRT, 16, 5) +FIELD(DABORT_ISS, SSE, 21, 1) +FIELD(DABORT_ISS, SAS, 22, 2) +FIELD(DABORT_ISS, ISV, 24, 1) + static inline uint32_t syn_data_abort_no_iss(int same_el, int fnv, int ea, int cm, int s1ptw, int wnr, int fsc) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (fnv << 10) | (ea << 9) | (cm << 8) | (s1ptw << 7) - | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, DABORT_ISS, FnV, fnv); + res = FIELD_DP32(res, DABORT_ISS, EA, ea); + res = FIELD_DP32(res, DABORT_ISS, CM, cm); + res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } static inline uint32_t syn_data_abort_with_iss(int same_el, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el, int wnr, int fsc, bool is_16bit) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | (is_16bit ? 0 : ARM_EL_IL) - | ARM_EL_ISV | (sas << 22) | (sse << 21) | (srt << 16) - | (sf << 15) | (ar << 14) - | (ea << 9) | (cm << 8) | (s1ptw << 7) | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, DABORT_ISS, ISV, 1); + res = FIELD_DP32(res, DABORT_ISS, SAS, sas); + res = FIELD_DP32(res, DABORT_ISS, SSE, sse); + res = FIELD_DP32(res, DABORT_ISS, SRT, srt); + res = FIELD_DP32(res, DABORT_ISS, SF, sf); + res = FIELD_DP32(res, DABORT_ISS, AR, ar); + res = FIELD_DP32(res, DABORT_ISS, EA, ea); + res = FIELD_DP32(res, DABORT_ISS, CM, cm); + res = FIELD_DP32(res, DABORT_ISS, S1PTW, s1ptw); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } /* @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_with_iss(int same_el, */ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc) { - return (EC_DATAABORT << ARM_EL_EC_SHIFT) | (1 << ARM_EL_EC_SHIFT) - | ARM_EL_IL | ARM_EL_VNCR | (wnr << 6) | fsc; + uint32_t res = syn_set_ec(0, EC_DATAABORT_SAME_EL); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, DABORT_ISS, VNCR, 1); + res = FIELD_DP32(res, DABORT_ISS, WNR, wnr); + res = FIELD_DP32(res, DABORT_ISS, DFSC, fsc); + + return res; } static inline uint32_t syn_swstep(int same_el, int isv, int ex) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Migrate syn_swstep, syn_watchpoint and syn_breakpoint to the registerfields API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-12-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 54 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 48 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_data_abort_vncr(int ea, int wnr, int fsc) return res; } +/* + * ISS encoding for an exception from a Software Step exception. + */ +FIELD(SOFTSTEP_ISS, IFSC, 0, 6) +FIELD(SOFTSTEP_ISS, EX, 6, 1) +FIELD(SOFTSTEP_ISS, ISV, 24, 1) + static inline uint32_t syn_swstep(int same_el, int isv, int ex) { - return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22; + uint32_t res = syn_set_ec(0, EC_SOFTWARESTEP + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, SOFTSTEP_ISS, ISV, isv); + res = FIELD_DP32(res, SOFTSTEP_ISS, EX, ex); + res = FIELD_DP32(res, SOFTSTEP_ISS, IFSC, 0x22); + + return res; } +/* + * ISS encoding for an exception from a Watchpoint exception + */ +FIELD(WATCHPOINT_ISS, DFSC, 0, 6) +FIELD(WATCHPOINT_ISS, WNR, 6, 1) +FIELD(WATCHPOINT_ISS, CM, 8, 1) +FIELD(WATCHPOINT_ISS, FnV, 10, 1) +FIELD(WATCHPOINT_ISS, VNCR, 13, 1) /* FEAT_NV2 */ +FIELD(WATCHPOINT_ISS, FnP, 15, 1) +FIELD(WATCHPOINT_ISS, WPF, 16, 1) +/* bellow mandatory from FEAT_Debugv8p9 */ +FIELD(WATCHPOINT_ISS, WPTV, 17, 1) /* FEAT_Debugv8p2 - WPT valid */ +FIELD(WATCHPOINT_ISS, WPT, 18, 6) /* FEAT_Debugv8p2 - missing WP number */ + static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr) { - return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22; + uint32_t res = syn_set_ec(0, EC_WATCHPOINT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, WATCHPOINT_ISS, CM, cm); + res = FIELD_DP32(res, WATCHPOINT_ISS, WNR, wnr); + res = FIELD_DP32(res, WATCHPOINT_ISS, DFSC, 0x22); + + return res; } +/* + * ISS encoding for an exception from a Breakpoint or a Vector Catch + * debug exception. + */ +FIELD(BREAKPOINT_ISS, IFSC, 0, 6) + static inline uint32_t syn_breakpoint(int same_el) { - return (EC_BREAKPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) - | ARM_EL_IL | 0x22; + uint32_t res = syn_set_ec(0, EC_BREAKPOINT + same_el); + res = FIELD_DP32(res, SYNDROME, IL, 1); + res = FIELD_DP32(res, BREAKPOINT_ISS, IFSC, 0x22); + + return res; } static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This will help later when we expand the fields we report. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-13-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_breakpoint(int same_el) return res; } +/* + * ISS encoding for an exception from a WF* instruction + */ +FIELD(WFX_ISS, TI, 0, 2) +FIELD(WFX_ISS, RV, 2, 1) +FIELD(WFX_ISS, RN, 5, 5) +FIELD(WFX_ISS, COND, 20, 4) +FIELD(WFX_ISS, CV, 24, 1) + static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) { - return (EC_WFX_TRAP << ARM_EL_EC_SHIFT) | - (is_16bit ? 0 : (1 << ARM_EL_IL_SHIFT)) | - (cv << 24) | (cond << 20) | ti; + uint32_t res = syn_set_ec(0, EC_WFX_TRAP); + res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); + + res = FIELD_DP32(res, WFX_ISS, CV, cv); + res = FIELD_DP32(res, WFX_ISS, COND, cond); + res = FIELD_DP32(res, WFX_ISS, TI, ti); + + return res; } static inline uint32_t syn_illegalstate(void) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Tweak arg names to make it clear raddr is the data address register number. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-14-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 39 +++++++++++++++++++++++++++++++++------ 1 file changed, 33 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void) return res; } +/* + * ISS encoding for a GCS exception + * + * Field validity depends on EXTYPE + */ +FIELD(GCS_ISS, IT, 0, 5) +FIELD(GCS_ISS, RN, 5, 5) /* only for non EXLOCK exceptions */ +FIELD(GCS_ISS, RADDR, 10, 5) /* only for GCSSTR/GCSSTTR traps */ +FIELD(GCS_ISS, EXTYPE, 20, 4) + static inline uint32_t syn_gcs_data_check(GCSInstructionType it, int rn) { - return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (GCS_ET_DataCheck << 20) | (rn << 5) | it); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_DataCheck); + res = FIELD_DP32(res, GCS_ISS, RN, rn); + res = FIELD_DP32(res, GCS_ISS, IT, it); + + return res; } static inline uint32_t syn_gcs_exlock(void) { - return (EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | (GCS_ET_EXLOCK << 20); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_EXLOCK); + + return res; } -static inline uint32_t syn_gcs_gcsstr(int ra, int rn) +static inline uint32_t syn_gcs_gcsstr(int raddr, int rn) { - return ((EC_GCS << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (GCS_ET_GCSSTR_GCSSTTR << 20) | (ra << 10) | (rn << 5)); + uint32_t res = syn_set_ec(0, EC_GCS); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, GCS_ISS, EXTYPE, GCS_ET_GCSSTR_GCSSTTR); + res = FIELD_DP32(res, GCS_ISS, RADDR, raddr); + res = FIELD_DP32(res, GCS_ISS, RN, rn); + + return res; } static inline uint32_t syn_serror(uint32_t extra) -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-15-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_serror(uint32_t extra) return res; } +/* + * ISS encoding for an exception from the Memory Copy and Memory Set + * instructions. + */ +FIELD(MOP_ISS, SIZEREG, 0, 5) +FIELD(MOP_ISS, SRCREG, 5, 5) +FIELD(MOP_ISS, DESTREG, 10, 5) +FIELD(MOP_ISS, FORMATOPT, 16, 2) +FIELD(MOP_ISS, OPT_A, 16, 1) +FIELD(MOP_ISS, WRONG_OPT, 17, 1) +FIELD(MOP_ISS, EPILOGUE, 18, 1) +FIELD(MOP_ISS, OPTIONS, 19, 4) +FIELD(MOP_ISS, IS_SETG, 23, 1) +FIELD(MOP_ISS, MEMINST, 24, 1) + static inline uint32_t syn_mop(bool is_set, bool is_setg, int options, bool epilogue, bool wrong_option, bool option_a, int destreg, int srcreg, int sizereg) { - return (EC_MOP << ARM_EL_EC_SHIFT) | ARM_EL_IL | - (is_set << 24) | (is_setg << 23) | (options << 19) | - (epilogue << 18) | (wrong_option << 17) | (option_a << 16) | - (destreg << 10) | (srcreg << 5) | sizereg; + uint32_t res = syn_set_ec(0, EC_MOP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, MOP_ISS, MEMINST, is_set); + res = FIELD_DP32(res, MOP_ISS, IS_SETG, is_setg); + res = FIELD_DP32(res, MOP_ISS, OPTIONS, options); + res = FIELD_DP32(res, MOP_ISS, EPILOGUE, epilogue); + res = FIELD_DP32(res, MOP_ISS, WRONG_OPT, wrong_option); + res = FIELD_DP32(res, MOP_ISS, OPT_A, option_a); + res = FIELD_DP32(res, MOP_ISS, DESTREG, destreg); + res = FIELD_DP32(res, MOP_ISS, SRCREG, srcreg); + res = FIELD_DP32(res, MOP_ISS, SIZEREG, sizereg); + + return res; } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> It shares the same COPROC_ISS encoding as the other CP traps although not all the fields are used. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-16-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 16 ++++++++++++++++ target/arm/tcg/vfp_helper.c | 5 +---- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ FIELD(COPROC_ISS, OP2, 17, 3) FIELD(COPROC_ISS, COND, 20, 4) FIELD(COPROC_ISS, CV, 24, 1) +static inline uint32_t syn_cp10_rt_trap(int cv, int cond, int opc1, + int crn, int rt, int isread) +{ + uint32_t res = syn_set_ec(0, EC_FPIDTRAP); + res = FIELD_DP32(res, SYNDROME, IL, 1); + + res = FIELD_DP32(res, COPROC_ISS, CV, cv); + res = FIELD_DP32(res, COPROC_ISS, COND, cond); + res = FIELD_DP32(res, COPROC_ISS, OP1, opc1); + res = FIELD_DP32(res, COPROC_ISS, CRN, crn); + res = FIELD_DP32(res, COPROC_ISS, RT, rt); + res = FIELD_DP32(res, COPROC_ISS, ISREAD, isread); + + return res; +} + static inline uint32_t syn_cp14_rt_trap(int cv, int cond, int opc1, int opc2, int crn, int crm, int rt, int isread, bool is_16bit) diff --git a/target/arm/tcg/vfp_helper.c b/target/arm/tcg/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/vfp_helper.c +++ b/target/arm/tcg/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(check_hcr_el2_trap)(CPUARMState *env, uint32_t rt, uint32_t reg) g_assert_not_reached(); } - syndrome = ((EC_FPIDTRAP << ARM_EL_EC_SHIFT) - | ARM_EL_IL - | (1 << 24) | (0xe << 20) | (7 << 14) - | (reg << 10) | (rt << 5) | 1); + syndrome = syn_cp10_rt_trap(1, 0xe, 7, reg, rt, 1); raise_exception(env, EXCP_HYP_TRAP, syndrome, 2); } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> One more step towards dropping the old #defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-17-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs) */ if (cs->exception_index == EXCP_PREFETCH_ABORT || (cs->exception_index == EXCP_DATA_ABORT && - !(env->exception.syndrome & ARM_EL_ISV)) || + !FIELD_EX32(env->exception.syndrome, SYNDROME, IL)) || syn_get_ec(env->exception.syndrome) == EC_UNCATEGORIZED) { - env->exception.syndrome &= ~ARM_EL_IL; + env->exception.syndrome = FIELD_DP32(env->exception.syndrome, SYNDROME, IL, 0); } } env->cp15.esr_el[2] = env->exception.syndrome; -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> This removes the last use of ARM_EL_EC_SHIFT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-18-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 1 - target/arm/tcg/debug.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ typedef enum { } GCSInstructionType; #define ARM_EL_EC_LENGTH 6 -#define ARM_EL_EC_SHIFT 26 #define ARM_EL_IL_SHIFT 25 #define ARM_EL_ISV_SHIFT 24 #define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) diff --git a/target/arm/tcg/debug.c b/target/arm/tcg/debug.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/debug.c +++ b/target/arm/tcg/debug.c @@ -XXX,XX +XXX,XX @@ raise_exception_debug(CPUARMState *env, uint32_t excp, uint32_t syndrome) * Similarly for watchpoint and breakpoint matches. */ assert(debug_el >= cur_el); - syndrome |= (debug_el == cur_el) << ARM_EL_EC_SHIFT; + syndrome |= (debug_el == cur_el) << R_SYNDROME_EC_SHIFT; raise_exception(env, excp, syndrome, debug_el); } -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Rather than open coding a bunch of shifts and masks we can use the syndrome definitions. While we are at it assert it really is a EC_DATAABORT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-19-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/whpx/whpx-all.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/target/arm/whpx/whpx-all.c b/target/arm/whpx/whpx-all.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/whpx/whpx-all.c +++ b/target/arm/whpx/whpx-all.c @@ -XXX,XX +XXX,XX @@ static int whpx_handle_mmio(CPUState *cpu, WHV_MEMORY_ACCESS_CONTEXT *ctx) { uint64_t syndrome = ctx->Syndrome; - bool isv = syndrome & ARM_EL_ISV; - bool iswrite = (syndrome >> 6) & 1; - bool sse = (syndrome >> 21) & 1; - uint32_t sas = (syndrome >> 22) & 3; + bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV); + bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR); + bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE); + uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS); uint32_t len = 1 << sas; - uint32_t srt = (syndrome >> 16) & 0x1f; - uint32_t cm = (syndrome >> 8) & 0x1; + uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT); + uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM); uint64_t val = 0; + assert(syn_get_ec(syndrome) == EC_DATAABORT); assert(!cm); assert(isv); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Rather than open coding a bunch of shifts and masks we can use the syndrome definitions. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20260422125250.1303100-20-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/hvf/hvf.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/hvf.c +++ b/target/arm/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ static int hvf_handle_exception(CPUState *cpu, hv_vcpu_exit_exception_t *excp) break; } case EC_DATAABORT: { - bool isv = syndrome & ARM_EL_ISV; - bool iswrite = (syndrome >> 6) & 1; - bool s1ptw = (syndrome >> 7) & 1; - bool sse = (syndrome >> 21) & 1; - uint32_t sas = (syndrome >> 22) & 3; + bool isv = FIELD_EX32(syndrome, DABORT_ISS, ISV); + bool iswrite = FIELD_EX32(syndrome, DABORT_ISS, WNR); + bool s1ptw = FIELD_EX32(syndrome, DABORT_ISS, S1PTW); + bool sse = FIELD_EX32(syndrome, DABORT_ISS, SSE); + uint32_t sas = FIELD_EX32(syndrome, DABORT_ISS, SAS); uint32_t len = 1 << sas; - uint32_t srt = (syndrome >> 16) & 0x1f; - uint32_t cm = (syndrome >> 8) & 0x1; + uint32_t srt = FIELD_EX32(syndrome, DABORT_ISS, SRT); + uint32_t cm = FIELD_EX32(syndrome, DABORT_ISS, CM); uint64_t val = 0; uint64_t ipa = excp->physical_address; AddressSpace *as = cpu_get_address_space(cpu, ARMASIdx_NS); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> One more step to removing the old defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-21-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/tlb_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/tlb_helper.c +++ b/target/arm/tcg/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn, */ assert(!fi->stage2); syn = syn_data_abort_vncr(fi->ea, is_write, fsc); - } else if (!(template_syn & ARM_EL_ISV) || target_el != 2 + } else if (!FIELD_EX32(template_syn, DABORT_ISS, ISV) || target_el != 2 || fi->s1ptw || !fi->stage2) { syn = syn_data_abort_no_iss(same_el, 0, fi->ea, 0, fi->s1ptw, is_write, fsc); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> These are only valid for data abort syndromes. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-22-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/tlb_helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/tlb_helper.c b/target/arm/tcg/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/tlb_helper.c +++ b/target/arm/tcg/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t merge_syn_data_abort(uint32_t template_syn, * ST64BV, or ST64BV0 insns report syndrome info even for stage-1 * faults and regardless of the target EL. */ - if (template_syn & ARM_EL_VNCR) { + if (FIELD_EX32(template_syn, DABORT_ISS, VNCR)) { /* * FEAT_NV2 faults on accesses via VNCR_EL2 are a special case: * they are always reported as "same EL", even though we are going @@ -XXX,XX +XXX,XX @@ void arm_deliver_fault(ARMCPU *cpu, vaddr addr, * because we masked that out in disas_set_insn_syndrome()) */ bool is_vncr = (access_type != MMU_INST_FETCH) && - (env->exception.syndrome & ARM_EL_VNCR); + FIELD_EX32(env->exception.syndrome, DABORT_ISS, VNCR); if (is_vncr) { /* FEAT_NV2 faults on accesses via VNCR_EL2 go to EL2 */ -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Now everything is defined with registerfields we can drop the old defines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-23-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 9 --------- 1 file changed, 9 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ typedef enum { GCS_IT_GCSPOPX = 9, } GCSInstructionType; -#define ARM_EL_EC_LENGTH 6 -#define ARM_EL_IL_SHIFT 25 -#define ARM_EL_ISV_SHIFT 24 -#define ARM_EL_IL (1 << ARM_EL_IL_SHIFT) -#define ARM_EL_ISV (1 << ARM_EL_ISV_SHIFT) - -/* In the Data Abort syndrome */ -#define ARM_EL_VNCR (1 << 13) - static inline uint32_t syn_get_ec(uint32_t syn) { return FIELD_EX32(syn, SYNDROME, EC); -- 2.43.0 From: Alex Bennée <alex.bennee@linaro.org> Pass the register number (rd) to the wfit helper and report it in the syndrome ISS. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20260422125250.1303100-24-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 11 ++++++++++- target/arm/tcg/helper-defs.h | 2 +- target/arm/tcg/op_helper.c | 7 ++++--- target/arm/tcg/translate-a64.c | 2 +- 4 files changed, 16 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ FIELD(WFX_ISS, RN, 5, 5) FIELD(WFX_ISS, COND, 20, 4) FIELD(WFX_ISS, CV, 24, 1) -static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) +typedef enum { + WFI = 0b00, + WFE = 0b01, + WFIT = 0b10, + WFET = 0xb11 +} wfx_ti; + +static inline uint32_t syn_wfx(int cv, int cond, int rn, bool rv, wfx_ti ti, bool is_16bit) { uint32_t res = syn_set_ec(0, EC_WFX_TRAP); res = FIELD_DP32(res, SYNDROME, IL, !is_16bit); @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) res = FIELD_DP32(res, WFX_ISS, CV, cv); res = FIELD_DP32(res, WFX_ISS, COND, cond); res = FIELD_DP32(res, WFX_ISS, TI, ti); + res = FIELD_DP32(res, WFX_ISS, RN, rn); + res = FIELD_DP32(res, WFX_ISS, RV, rv); return res; } diff --git a/target/arm/tcg/helper-defs.h b/target/arm/tcg/helper-defs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-defs.h +++ b/target/arm/tcg/helper-defs.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(exception_pc_alignment, noreturn, env, vaddr) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) DEF_HELPER_1(wfe, void, env) -DEF_HELPER_2(wfit, void, env, i64) +DEF_HELPER_2(wfit, void, env, i32) DEF_HELPER_1(yield, void, env) DEF_HELPER_1(pre_hvc, void, env) DEF_HELPER_2(pre_smc, void, env, i32) diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) env->regs[15] -= insn_len; } - raise_exception(env, excp, syn_wfx(1, 0xe, 0, insn_len == 2), + raise_exception(env, excp, syn_wfx(1, 0xe, 0, false, WFI, insn_len == 2), target_el); } @@ -XXX,XX +XXX,XX @@ void HELPER(wfi)(CPUARMState *env, uint32_t insn_len) #endif } -void HELPER(wfit)(CPUARMState *env, uint64_t timeout) +void HELPER(wfit)(CPUARMState *env, uint32_t rd) { #ifdef CONFIG_USER_ONLY /* @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) int target_el = check_wfx_trap(env, false, &excp); /* The WFIT should time out when CNTVCT_EL0 >= the specified value. */ uint64_t cntval = gt_get_countervalue(env); + uint64_t timeout = env->xregs[rd]; /* * We want the value that we would get if we read CNTVCT_EL0 from * the current exception level, so the direct_access offset, not @@ -XXX,XX +XXX,XX @@ void HELPER(wfit)(CPUARMState *env, uint64_t timeout) if (target_el) { env->pc -= 4; - raise_exception(env, excp, syn_wfx(1, 0xe, 2, false), target_el); + raise_exception(env, excp, syn_wfx(1, 0xe, rd, true, WFIT, false), target_el); } if (uadd64_overflow(timeout, offset, &nexttick)) { diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_WFIT(DisasContext *s, arg_WFIT *a) } gen_a64_update_pc(s, 4); - gen_helper_wfit(tcg_env, cpu_reg(s, a->rd)); + gen_helper_wfit(tcg_env, tcg_constant_i32(a->rd)); /* Go back to the main loop to check for interrupts */ s->base.is_jmp = DISAS_EXIT; return true; -- 2.43.0