Series comparison

ARM queue, various patches accumulated over the Christmas break.

-- PMM

The following changes since commit 612061b277915fadd80631eb7a6926f48a110c44:

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-01-10' into staging (2018-01-11 11:52:40 +0000)

are available in the git repository at:

git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180111

for you to fetch changes up to 0cf09852015e47a5fbb974ff7ac320366afd21ee:

hw/intc/arm_gic: reserved register addresses are RAZ/WI (2018-01-11 13:25:40 +0000)

----------------------------------------------------------------
target-arm queue:
 * add aarch64_be linux-user target
 * Virt: ACPI: fix qemu assert due to re-assigned table data address
 * imx_fec: various bug fixes and cleanups
 * hw/timer/pxa2xx_timer: replace hw_error() -> qemu_log_mask()
 * hw/sd/pxa2xx_mmci: add read/write() trace events
 * linux-user/arm/nwfpe: Check coprocessor number for FPA emulation
 * target/arm: Make disas_thumb2_insn() generate its own UNDEF exceptions
 * hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI
 * hw/intc/arm_gic: reserved register addresses are RAZ/WI

----------------------------------------------------------------
Andrey Smirnov (11):
      imx_fec: Do not link to netdev
      imx_fec: Refactor imx_eth_enable_rx()
      imx_fec: Change queue flushing heuristics
      imx_fec: Move Tx frame buffer away from the stack
      imx_fec: Use ENET_FTRL to determine truncation length
      imx_fec: Use MIN instead of explicit ternary operator
      imx_fec: Emulate SHIFT16 in ENETx_RACC
      imx_fec: Add support for multiple Tx DMA rings
      imx_fec: Use correct length for packet size
      imx_fec: Fix a typo in imx_enet_receive()
      imx_fec: Reserve full FSL_IMX25_FEC_SIZE page for the register file

Michael Weiser (8):
      linux-user: Add support for big-endian aarch64
      linux-user: Add separate aarch64_be uname
      linux-user: Fix endianess of aarch64 signal trampoline
      configure: Add aarch64_be-linux-user target
      linux-user: Add aarch64_be magic numbers to qemu-binfmt-conf.sh
      linux-user: Separate binfmt arm CPU families
      linux-user: Activate armeb handler registration
      target/arm: Fix stlxp for aarch64_be

Peter Maydell (4):
      linux-user/arm/nwfpe: Check coprocessor number for FPA emulation
      target/arm: Make disas_thumb2_insn() generate its own UNDEF exceptions
      hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI
      hw/intc/arm_gic: reserved register addresses are RAZ/WI

Philippe Mathieu-Daudé (2):
      hw/timer/pxa2xx_timer: replace hw_error() -> qemu_log_mask()
      hw/sd/pxa2xx_mmci: add read/write() trace events

Zhaoshenglong (1):
      Virt: ACPI: fix qemu assert due to re-assigned table data address

From: Michael Weiser <michael.weiser@gmx.de>

Enable big-endian mode for data accesses on aarch64 for big-endian linux
user mode. Activate it for all exception levels as documented by ARM:
Set the SCTLR EE bit for ELs 1 through 3. Additionally set bit E0E in
EL1 to enable it in EL0 as well.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20171220212308.12614-2-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/main.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/linux-user/main.c b/linux-user/main.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv, char **envp)
         }
         env->pc = regs->pc;
         env->xregs[31] = regs->sp;
+#ifdef TARGET_WORDS_BIGENDIAN
+        env->cp15.sctlr_el[1] |= SCTLR_E0E;
+        for (i = 1; i < 4; ++i) {
+            env->cp15.sctlr_el[i] |= SCTLR_EE;
+        }
+#endif
     }
 #elif defined(TARGET_ARM)
     {
-- 
2.7.4

From: Michael Weiser <michael.weiser@gmx.de>

Make big-endian aarch64 systems identify as aarch64_be as expected by
big-endian userland and toolchains.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-3-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/aarch64/target_syscall.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/linux-user/aarch64/target_syscall.h b/linux-user/aarch64/target_syscall.h
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/aarch64/target_syscall.h
+++ b/linux-user/aarch64/target_syscall.h
@@ -XXX,XX +XXX,XX @@ struct target_pt_regs {
     uint64_t        pstate;
 };
 
+#if defined(TARGET_WORDS_BIGENDIAN)
+#define UNAME_MACHINE "aarch64_be"
+#else
 #define UNAME_MACHINE "aarch64"
+#endif
 #define UNAME_MINIMUM_RELEASE "3.8.0"
 #define TARGET_CLONE_BACKWARDS
 #define TARGET_MINSIGSTKSZ       2048
-- 
2.7.4

From: Michael Weiser <michael.weiser@gmx.de>

Since for aarch64 the signal trampoline is synthesized directly into the
signal frame we need to make sure the instructions end up little-endian.
Otherwise the wrong endianness will cause a SIGILL upon return from the
signal handler on big-endian targets.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20171220212308.12614-4-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/signal.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/linux-user/signal.c b/linux-user/signal.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/signal.c
+++ b/linux-user/signal.c
@@ -XXX,XX +XXX,XX @@ static void target_setup_frame(int usig, struct target_sigaction *ka,
     if (ka->sa_flags & TARGET_SA_RESTORER) {
         return_addr = ka->sa_restorer;
     } else {
-        /* mov x8,#__NR_rt_sigreturn; svc #0 */
-        __put_user(0xd2801168, &frame->tramp[0]);
-        __put_user(0xd4000001, &frame->tramp[1]);
+        /*
+         * mov x8,#__NR_rt_sigreturn; svc #0
+         * Since these are instructions they need to be put as little-endian
+         * regardless of target default or current CPU endianness.
+         */
+        __put_user_e(0xd2801168, &frame->tramp[0], le);
+        __put_user_e(0xd4000001, &frame->tramp[1], le);
         return_addr = frame_addr + offsetof(struct target_rt_sigframe, tramp);
     }
     env->xregs[0] = usig;
-- 
2.7.4

From: Michael Weiser <michael.weiser@gmx.de>

Add target aarch64_be-linux-user. This allows a qemu-aarch64_be binary
to be built that will run big-endian aarch64 binaries.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-5-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 configure                                 | 5 +++--
 default-configs/aarch64_be-linux-user.mak | 1 +
 2 files changed, 4 insertions(+), 2 deletions(-)
 create mode 100644 default-configs/aarch64_be-linux-user.mak

From: Michael Weiser <michael.weiser@gmx.de>

As we now have a linux-user aarch64_be target, we can add it to the list
of supported targets in qemu-binfmt-conf.sh

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-6-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 scripts/qemu-binfmt-conf.sh | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/scripts/qemu-binfmt-conf.sh b/scripts/qemu-binfmt-conf.sh
index XXXXXXX..XXXXXXX 100755
--- a/scripts/qemu-binfmt-conf.sh
+++ b/scripts/qemu-binfmt-conf.sh
@@ -XXX,XX +XXX,XX @@
 
 qemu_target_list="i386 i486 alpha arm sparc32plus ppc ppc64 ppc64le m68k \
 mips mipsel mipsn32 mipsn32el mips64 mips64el \
-sh4 sh4eb s390x aarch64 hppa"
+sh4 sh4eb s390x aarch64 aarch64_be hppa"
 
 i386_magic='\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00'
 i386_mask='\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff'
@@ -XXX,XX +XXX,XX @@ aarch64_magic='\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x
 aarch64_mask='\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff'
 aarch64_family=arm
 
+aarch64_be_magic='\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7'
+aarch64_be_mask='\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff'
+aarch64_be_family=arm
+
 hppa_magic='\x7f\x45\x4c\x46\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x0f'
 hppa_mask='\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff'
 hppa_family=hppa
-- 
2.7.4

From: Michael Weiser <michael.weiser@gmx.de>

Give big-endian arm and aarch64 CPUs their own family in
qemu-binfmt-conf.sh to make sure we register qemu-user for binaries of
the opposite endianness on arm and aarch64. Apart from the family
assignments of the magic values, qemu_get_family() needs to be able to
distinguish the two and recognise aarch64{,_be} as well.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-7-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 scripts/qemu-binfmt-conf.sh | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/scripts/qemu-binfmt-conf.sh b/scripts/qemu-binfmt-conf.sh
index XXXXXXX..XXXXXXX 100755
--- a/scripts/qemu-binfmt-conf.sh
+++ b/scripts/qemu-binfmt-conf.sh
@@ -XXX,XX +XXX,XX @@ arm_family=arm
 
 armeb_magic='\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28'
 armeb_mask='\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff'
-armeb_family=arm
+armeb_family=armeb
 
 sparc_magic='\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x02'
 sparc_mask='\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff'
@@ -XXX,XX +XXX,XX @@ aarch64_family=arm
 
 aarch64_be_magic='\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7'
 aarch64_be_mask='\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff'
-aarch64_be_family=arm
+aarch64_be_family=armeb
 
 hppa_magic='\x7f\x45\x4c\x46\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x0f'
 hppa_mask='\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff'
@@ -XXX,XX +XXX,XX @@ qemu_get_family() {
     ppc64el|ppc64le)
         echo "ppcle"
         ;;
-    arm|armel|armhf|arm64|armv[4-9]*)
+    arm|armel|armhf|arm64|armv[4-9]*l|aarch64)
         echo "arm"
         ;;
+    armeb|armv[4-9]*b|aarch64_be)
+        echo "armeb"
+        ;;
     sparc*)
         echo "sparc"
         ;;
-- 
2.7.4

From: Michael Weiser <michael.weiser@gmx.de>

armeb is missing from the target list in qemu-binfmt-conf.sh. Add it so
the handler for those binaries gets registered by the script.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-8-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 scripts/qemu-binfmt-conf.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/qemu-binfmt-conf.sh b/scripts/qemu-binfmt-conf.sh
index XXXXXXX..XXXXXXX 100755
--- a/scripts/qemu-binfmt-conf.sh
+++ b/scripts/qemu-binfmt-conf.sh
@@ -XXX,XX +XXX,XX @@
 # enable automatic i386/ARM/M68K/MIPS/SPARC/PPC/s390/HPPA
 # program execution by the kernel
 
-qemu_target_list="i386 i486 alpha arm sparc32plus ppc ppc64 ppc64le m68k \
+qemu_target_list="i386 i486 alpha arm armeb sparc32plus ppc ppc64 ppc64le m68k \
 mips mipsel mipsn32 mipsn32el mips64 mips64el \
 sh4 sh4eb s390x aarch64 aarch64_be hppa"
 
-- 
2.7.4

From: Michael Weiser <michael.weiser@gmx.de>

ldxp loads two consecutive doublewords from memory regardless of CPU
endianness. On store, stlxp currently assumes to work with a 128bit
value and consequently switches order in big-endian mode. With this
change it packs the doublewords in reverse order in anticipation of the
128bit big-endian store operation interposing them so they end up in
memory in the right order. This makes it work for both MTTCG and !MTTCG.
It effectively implements the ARM ARM STLXP operation pseudo-code:

data = if BigEndian() then el1:el2 else el2:el1;

With this change an aarch64_be Linux 4.14.4 kernel succeeds to boot up
in system emulation mode.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper-a64.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper-a64.c
+++ b/target/arm/helper-a64.c
@@ -XXX,XX +XXX,XX @@ static uint64_t do_paired_cmpxchg64_be(CPUARMState *env, uint64_t addr,
     Int128 oldv, cmpv, newv;
     bool success;
 
-    cmpv = int128_make128(env->exclusive_val, env->exclusive_high);
-    newv = int128_make128(new_lo, new_hi);
+    /* high and low need to be switched here because this is not actually a
+     * 128bit store but two doublewords stored consecutively
+     */
+    cmpv = int128_make128(env->exclusive_high, env->exclusive_val);
+    newv = int128_make128(new_hi, new_lo);
 
     if (parallel) {
 #ifndef CONFIG_ATOMIC128
-- 
2.7.4

From: Zhaoshenglong <zhaoshenglong@huawei.com>

acpi_data_push uses g_array_set_size to resize the memory size. If there
is no enough contiguous memory, the address will be changed. If we use
the old value, it will assert.
qemu-kvm: hw/acpi/bios-linker-loader.c:214: bios_linker_loader_add_checksum:
Assertion `start_offset < file->blob->len' failed.`

This issue only happens in building SRAT table now but here we unify the
pattern for other tables as well to avoid possible issues in the future.

Signed-off-by: Zhaoshenglong <zhaoshenglong@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/virt-acpi-build.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -XXX,XX +XXX,XX @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     AcpiSerialPortConsoleRedirection *spcr;
     const MemMapEntry *uart_memmap = &vms->memmap[VIRT_UART];
     int irq = vms->irqmap[VIRT_UART] + ARM_SPI_BASE;
+    int spcr_start = table_data->len;
 
     spcr = acpi_data_push(table_data, sizeof(*spcr));
 
@@ -XXX,XX +XXX,XX @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     spcr->pci_device_id = 0xffff;  /* PCI Device ID: not a PCI device */
     spcr->pci_vendor_id = 0xffff;  /* PCI Vendor ID: not a PCI device */
 
-    build_header(linker, table_data, (void *)spcr, "SPCR", sizeof(*spcr), 2,
-                 NULL, NULL);
+    build_header(linker, table_data, (void *)(table_data->data + spcr_start),
+                 "SPCR", table_data->len - spcr_start, 2, NULL, NULL);
 }
 
 static void
@@ -XXX,XX +XXX,XX @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
         mem_base += numa_info[i].node_mem;
     }
 
-    build_header(linker, table_data, (void *)srat, "SRAT",
-                 table_data->len - srat_start, 3, NULL, NULL);
+    build_header(linker, table_data, (void *)(table_data->data + srat_start),
+                 "SRAT", table_data->len - srat_start, 3, NULL, NULL);
 }
 
 static void
@@ -XXX,XX +XXX,XX @@ build_mcfg(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     AcpiTableMcfg *mcfg;
     const MemMapEntry *memmap = vms->memmap;
     int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
+    int mcfg_start = table_data->len;
 
     mcfg = acpi_data_push(table_data, len);
     mcfg->allocation[0].address = cpu_to_le64(memmap[VIRT_PCIE_ECAM].base);
@@ -XXX,XX +XXX,XX @@ build_mcfg(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     mcfg->allocation[0].end_bus_number = (memmap[VIRT_PCIE_ECAM].size
                                           / PCIE_MMCFG_SIZE_MIN) - 1;
 
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
+                 "MCFG", table_data->len - mcfg_start, 1, NULL, NULL);
 }
 
 /* GTDT */
@@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 static void build_fadt(GArray *table_data, BIOSLinker *linker,
                        VirtMachineState *vms, unsigned dsdt_tbl_offset)
 {
+    int fadt_start = table_data->len;
     AcpiFadtDescriptorRev5_1 *fadt = acpi_data_push(table_data, sizeof(*fadt));
     unsigned xdsdt_entry_offset = (char *)&fadt->x_dsdt - table_data->data;
     uint16_t bootflags;
@@ -XXX,XX +XXX,XX @@ static void build_fadt(GArray *table_data, BIOSLinker *linker,
         ACPI_BUILD_TABLE_FILE, xdsdt_entry_offset, sizeof(fadt->x_dsdt),
         ACPI_BUILD_TABLE_FILE, dsdt_tbl_offset);
 
-    build_header(linker, table_data,
-                 (void *)fadt, "FACP", sizeof(*fadt), 5, NULL, NULL);
+    build_header(linker, table_data, (void *)(table_data->data + fadt_start),
+                 "FACP", table_data->len - fadt_start, 5, NULL, NULL);
 }
 
 /* DSDT */
-- 
2.7.4

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Binding to a particular netdev doesn't seem to belong to this layer
and should probably be done as a part of board or SoC specific code.

Convert all of the users of this IP block to use
qdev_set_nic_properties() instead.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/fsl-imx6.c | 1 +
 hw/net/imx_fec.c  | 2 --
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/hw/arm/fsl-imx6.c b/hw/arm/fsl-imx6.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/fsl-imx6.c
+++ b/hw/arm/fsl-imx6.c
@@ -XXX,XX +XXX,XX @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
                                             spi_table[i].irq));
     }
 
+    qdev_set_nic_properties(DEVICE(&s->eth), &nd_table[0]);
     object_property_set_bool(OBJECT(&s->eth), true, "realized", &err);
     if (err) {
         error_propagate(errp, err);
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -XXX,XX +XXX,XX @@ static void imx_eth_realize(DeviceState *dev, Error **errp)
 
     qemu_macaddr_default_if_unset(&s->conf.macaddr);
 
-    s->conf.peers.ncs[0] = nd_table[0].netdev;
-
     s->nic = qemu_new_nic(&imx_eth_net_info, &s->conf,
                           object_get_typename(OBJECT(dev)),
                           DEVICE(dev)->id, s);
-- 
2.7.4

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Refactor imx_eth_enable_rx() to have more meaningfull variable name
than 'tmp' and to reduce number of logical negations done.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/imx_fec.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -XXX,XX +XXX,XX @@ static void imx_eth_do_tx(IMXFECState *s)
 static void imx_eth_enable_rx(IMXFECState *s)
 {
     IMXFECBufDesc bd;
-    bool tmp;
+    bool rx_ring_full;
 
     imx_fec_read_bd(&bd, s->rx_descriptor);
 
-    tmp = ((bd.flags & ENET_BD_E) != 0);
+    rx_ring_full = !(bd.flags & ENET_BD_E);
 
-    if (!tmp) {
+    if (rx_ring_full) {
         FEC_PRINTF("RX buffer full\n");
     } else if (!s->regs[ENET_RDAR]) {
         qemu_flush_queued_packets(qemu_get_queue(s->nic));
     }
 
-    s->regs[ENET_RDAR] = tmp ? ENET_RDAR_RDAR : 0;
+    s->regs[ENET_RDAR] = rx_ring_full ? 0 : ENET_RDAR_RDAR;
 }
 
 static void imx_eth_reset(DeviceState *d)
-- 
2.7.4

From: Andrey Smirnov <andrew.smirnov@gmail.com>

In current implementation, packet queue flushing logic seem to suffer
from a deadlock like scenario if a packet is received by the interface
before before Rx ring is initialized by Guest's driver. Consider the
following sequence of events:

1. A QEMU instance is started against a TAP device on Linux
	   host, running Linux guest, e. g., something to the effect
	   of:

qemu-system-arm \
	      -net nic,model=imx.fec,netdev=lan0 \
	      netdev tap,id=lan0,ifname=tap0,script=no,downscript=no \
	      ... rest of the arguments ...

2. Once QEMU starts, but before guest reaches the point where
	   FEC deriver is done initializing the HW, Guest, via TAP
	   interface, receives a number of multicast MDNS packets from
	   Host (not necessarily true for every OS, but it happens at
	   least on Fedora 25)

3. Recieving a packet in such a state results in
	   imx_eth_can_receive() returning '0', which in turn causes
	   tap_send() to disable corresponding event (tap.c:203)

4. Once Guest's driver reaches the point where it is ready to
	   recieve packets it prepares Rx ring descriptors and writes
	   ENET_RDAR_RDAR to ENET_RDAR register to indicate to HW that
	   more descriptors are ready. And at this points emulation
	   layer does this:

s->regs[index] = ENET_RDAR_RDAR;
                 imx_eth_enable_rx(s);

which, combined with:

if (!s->regs[ENET_RDAR]) {
		     qemu_flush_queued_packets(qemu_get_queue(s->nic));
		  }

results in Rx queue never being flushed and corresponding
	   I/O event beign disabled.

To prevent the problem, change the code to always flush packet queue
when ENET_RDAR transitions 0 -> ENET_RDAR_RDAR.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/imx_fec.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -XXX,XX +XXX,XX @@ static void imx_eth_do_tx(IMXFECState *s)
     }
 }
 
-static void imx_eth_enable_rx(IMXFECState *s)
+static void imx_eth_enable_rx(IMXFECState *s, bool flush)
 {
     IMXFECBufDesc bd;
     bool rx_ring_full;
@@ -XXX,XX +XXX,XX @@ static void imx_eth_enable_rx(IMXFECState *s)
 
     if (rx_ring_full) {
         FEC_PRINTF("RX buffer full\n");
-    } else if (!s->regs[ENET_RDAR]) {
+    } else if (flush) {
         qemu_flush_queued_packets(qemu_get_queue(s->nic));
     }
 
@@ -XXX,XX +XXX,XX @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value,
         if (s->regs[ENET_ECR] & ENET_ECR_ETHEREN) {
             if (!s->regs[index]) {
                 s->regs[index] = ENET_RDAR_RDAR;
-                imx_eth_enable_rx(s);
+                imx_eth_enable_rx(s, true);
             }
         } else {
             s->regs[index] = 0;
@@ -XXX,XX +XXX,XX @@ static int imx_eth_can_receive(NetClientState *nc)
 
     FEC_PRINTF("\n");
 
-    return s->regs[ENET_RDAR] ? 1 : 0;
+    return !!s->regs[ENET_RDAR];
 }
 
 static ssize_t imx_fec_receive(NetClientState *nc, const uint8_t *buf,
@@ -XXX,XX +XXX,XX @@ static ssize_t imx_fec_receive(NetClientState *nc, const uint8_t *buf,
         }
     }
     s->rx_descriptor = addr;
-    imx_eth_enable_rx(s);
+    imx_eth_enable_rx(s, false);
     imx_eth_update(s);
     return len;
 }
@@ -XXX,XX +XXX,XX @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf,
         }
     }
     s->rx_descriptor = addr;
-    imx_eth_enable_rx(s);
+    imx_eth_enable_rx(s, false);
     imx_eth_update(s);
     return len;
 }
-- 
2.7.4

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Make Tx frame assembly buffer to be a paort of IMXFECState structure
to avoid a concern about having large data buffer on the stack.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/net/imx_fec.h |  3 +++
 hw/net/imx_fec.c         | 22 +++++++++++-----------
 2 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/net/imx_fec.h
+++ b/include/hw/net/imx_fec.h
@@ -XXX,XX +XXX,XX @@ typedef struct IMXFECState {
     uint32_t phy_int_mask;
 
     bool is_fec;
+
+    /* Buffer used to assemble a Tx frame */
+    uint8_t frame[ENET_MAX_FRAME_SIZE];
 } IMXFECState;
 
 #endif
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -XXX,XX +XXX,XX @@ static void imx_eth_update(IMXFECState *s)
 static void imx_fec_do_tx(IMXFECState *s)
 {
     int frame_size = 0, descnt = 0;
-    uint8_t frame[ENET_MAX_FRAME_SIZE];
-    uint8_t *ptr = frame;
+    uint8_t *ptr = s->frame;
     uint32_t addr = s->tx_descriptor;
 
     while (descnt++ < IMX_MAX_DESC) {
@@ -XXX,XX +XXX,XX @@ static void imx_fec_do_tx(IMXFECState *s)
         frame_size += len;
         if (bd.flags & ENET_BD_L) {
             /* Last buffer in frame.  */
-            qemu_send_packet(qemu_get_queue(s->nic), frame, frame_size);
-            ptr = frame;
+            qemu_send_packet(qemu_get_queue(s->nic), s->frame, frame_size);
+            ptr = s->frame;
             frame_size = 0;
             s->regs[ENET_EIR] |= ENET_INT_TXF;
         }
@@ -XXX,XX +XXX,XX @@ static void imx_fec_do_tx(IMXFECState *s)
 static void imx_enet_do_tx(IMXFECState *s)
 {
     int frame_size = 0, descnt = 0;
-    uint8_t frame[ENET_MAX_FRAME_SIZE];
-    uint8_t *ptr = frame;
+    uint8_t *ptr = s->frame;
     uint32_t addr = s->tx_descriptor;
 
     while (descnt++ < IMX_MAX_DESC) {
@@ -XXX,XX +XXX,XX @@ static void imx_enet_do_tx(IMXFECState *s)
         frame_size += len;
         if (bd.flags & ENET_BD_L) {
             if (bd.option & ENET_BD_PINS) {
-                struct ip_header *ip_hd = PKT_GET_IP_HDR(frame);
+                struct ip_header *ip_hd = PKT_GET_IP_HDR(s->frame);
                 if (IP_HEADER_VERSION(ip_hd) == 4) {
-                    net_checksum_calculate(frame, frame_size);
+                    net_checksum_calculate(s->frame, frame_size);
                 }
             }
             if (bd.option & ENET_BD_IINS) {
-                struct ip_header *ip_hd = PKT_GET_IP_HDR(frame);
+                struct ip_header *ip_hd = PKT_GET_IP_HDR(s->frame);
                 /* We compute checksum only for IPv4 frames */
                 if (IP_HEADER_VERSION(ip_hd) == 4) {
                     uint16_t csum;
@@ -XXX,XX +XXX,XX @@ static void imx_enet_do_tx(IMXFECState *s)
                 }
             }
             /* Last buffer in frame.  */
-            qemu_send_packet(qemu_get_queue(s->nic), frame, len);
-            ptr = frame;
+
+            qemu_send_packet(qemu_get_queue(s->nic), s->frame, len);
+            ptr = s->frame;
+
             frame_size = 0;
             if (bd.option & ENET_BD_TX_INT) {
                 s->regs[ENET_EIR] |= ENET_INT_TXF;
-- 
2.7.4

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Frame truncation length, TRUNC_FL, is determined by the contents of
ENET_FTRL register, so convert the code to use it instead of a
hardcoded constant.

To avoid the case where TRUNC_FL is greater that ENET_MAX_FRAME_SIZE,
increase the value of the latter to its theoretical maximum of 16K.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/net/imx_fec.h | 3 ++-
 hw/net/imx_fec.c         | 4 ++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/net/imx_fec.h
+++ b/include/hw/net/imx_fec.h
@@ -XXX,XX +XXX,XX @@
 #define ENET_TCCR3             393
 #define ENET_MAX               400
 
-#define ENET_MAX_FRAME_SIZE    2032
 
 /* EIR and EIMR */
 #define ENET_INT_HB            (1 << 31)
@@ -XXX,XX +XXX,XX @@
 #define ENET_RCR_NLC           (1 << 30)
 #define ENET_RCR_GRS           (1 << 31)
 
+#define ENET_MAX_FRAME_SIZE    (1 << ENET_RCR_MAX_FL_LENGTH)
+
 /* TCR */
 #define ENET_TCR_GTS           (1 << 0)
 #define ENET_TCR_FDEN          (1 << 2)
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -XXX,XX +XXX,XX @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf,
     crc_ptr = (uint8_t *) &crc;
 
     /* Huge frames are truncted.  */
-    if (size > ENET_MAX_FRAME_SIZE) {
-        size = ENET_MAX_FRAME_SIZE;
+    if (size > s->regs[ENET_FTRL]) {
+        size = s->regs[ENET_FTRL];
         flags |= ENET_BD_TR | ENET_BD_LG;
     }
 
-- 
2.7.4

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Needed to support latest Linux kernel driver which relies on that
functionality.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/net/imx_fec.h |  2 ++
 hw/net/imx_fec.c         | 23 +++++++++++++++++++++++
 2 files changed, 25 insertions(+)

diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/net/imx_fec.h
+++ b/include/hw/net/imx_fec.h
@@ -XXX,XX +XXX,XX @@
 #define ENET_TWFR_TFWR_LENGTH  (6)
 #define ENET_TWFR_STRFWD       (1 << 8)
 
+#define ENET_RACC_SHIFT16      BIT(7)
+
 /* Buffer Descriptor.  */
 typedef struct {
     uint16_t length;
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -XXX,XX +XXX,XX @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf,
     uint8_t *crc_ptr;
     unsigned int buf_len;
     size_t size = len;
+    bool shift16 = s->regs[ENET_RACC] & ENET_RACC_SHIFT16;
 
     FEC_PRINTF("len %d\n", (int)size);
 
@@ -XXX,XX +XXX,XX @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf,
     crc = cpu_to_be32(crc32(~0, buf, size));
     crc_ptr = (uint8_t *) &crc;
 
+    if (shift16) {
+        size += 2;
+    }
+
     /* Huge frames are truncted.  */
     if (size > s->regs[ENET_FTRL]) {
         size = s->regs[ENET_FTRL];
@@ -XXX,XX +XXX,XX @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf,
             buf_len += size - 4;
         }
         buf_addr = bd.data;
+
+        if (shift16) {
+            /*
+             * If SHIFT16 bit of ENETx_RACC register is set we need to
+             * align the payload to 4-byte boundary.
+             */
+            const uint8_t zeros[2] = { 0 };
+
+            dma_memory_write(&address_space_memory, buf_addr,
+                             zeros, sizeof(zeros));
+
+            buf_addr += sizeof(zeros);
+            buf_len  -= sizeof(zeros);
+
+            /* We only do this once per Ethernet frame */
+            shift16 = false;
+        }
+
         dma_memory_write(&address_space_memory, buf_addr, buf, buf_len);
         buf += buf_len;
         if (size < 4) {
-- 
2.7.4

From: Andrey Smirnov <andrew.smirnov@gmail.com>

More recent version of the IP block support more than one Tx DMA ring,
so add the code implementing that feature.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/net/imx_fec.h |  18 ++++++-
 hw/net/imx_fec.c         | 133 ++++++++++++++++++++++++++++++++++++++++-------
 2 files changed, 130 insertions(+), 21 deletions(-)

diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/net/imx_fec.h
+++ b/include/hw/net/imx_fec.h
@@ -XXX,XX +XXX,XX @@
 #define ENET_TFWR              81
 #define ENET_FRBR              83
 #define ENET_FRSR              84
+#define ENET_TDSR1             89
+#define ENET_TDSR2             92
 #define ENET_RDSR              96
 #define ENET_TDSR              97
 #define ENET_MRBR              98
@@ -XXX,XX +XXX,XX @@
 #define ENET_FTRL              108
 #define ENET_TACC              112
 #define ENET_RACC              113
+#define ENET_TDAR1             121
+#define ENET_TDAR2             123
 #define ENET_MIIGSK_CFGR       192
 #define ENET_MIIGSK_ENR        194
 #define ENET_ATCR              256
@@ -XXX,XX +XXX,XX @@
 #define ENET_INT_WAKEUP        (1 << 17)
 #define ENET_INT_TS_AVAIL      (1 << 16)
 #define ENET_INT_TS_TIMER      (1 << 15)
+#define ENET_INT_TXF2          (1 <<  7)
+#define ENET_INT_TXB2          (1 <<  6)
+#define ENET_INT_TXF1          (1 <<  3)
+#define ENET_INT_TXB1          (1 <<  2)
 
 #define ENET_INT_MAC           (ENET_INT_HB | ENET_INT_BABR | ENET_INT_BABT | \
                                 ENET_INT_GRA | ENET_INT_TXF | ENET_INT_TXB | \
                                 ENET_INT_RXF | ENET_INT_RXB | ENET_INT_MII | \
                                 ENET_INT_EBERR | ENET_INT_LC | ENET_INT_RL | \
                                 ENET_INT_UN | ENET_INT_PLR | ENET_INT_WAKEUP | \
-                                ENET_INT_TS_AVAIL)
+                                ENET_INT_TS_AVAIL | ENET_INT_TXF1 | \
+                                ENET_INT_TXB1 | ENET_INT_TXF2 | ENET_INT_TXB2)
 
 /* RDAR */
 #define ENET_RDAR_RDAR         (1 << 24)
@@ -XXX,XX +XXX,XX @@ typedef struct {
 
 #define ENET_BD_BDU            (1 << 31)
 
+#define ENET_TX_RING_NUM       3
+
+
 typedef struct IMXFECState {
     /*< private >*/
     SysBusDevice parent_obj;
@@ -XXX,XX +XXX,XX @@ typedef struct IMXFECState {
 
     uint32_t regs[ENET_MAX];
     uint32_t rx_descriptor;
-    uint32_t tx_descriptor;
+
+    uint32_t tx_descriptor[ENET_TX_RING_NUM];
+    uint32_t tx_ring_num;
 
     uint32_t phy_status;
     uint32_t phy_control;
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -XXX,XX +XXX,XX @@ static const char *imx_eth_reg_name(IMXFECState *s, uint32_t index)
     }
 }
 
+/*
+ * Versions of this device with more than one TX descriptor save the
+ * 2nd and 3rd descriptors in a subsection, to maintain migration
+ * compatibility with previous versions of the device that only
+ * supported a single descriptor.
+ */
+static bool imx_eth_is_multi_tx_ring(void *opaque)
+{
+    IMXFECState *s = IMX_FEC(opaque);
+
+    return s->tx_ring_num > 1;
+}
+
+static const VMStateDescription vmstate_imx_eth_txdescs = {
+    .name = "imx.fec/txdescs",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .needed = imx_eth_is_multi_tx_ring,
+    .fields = (VMStateField[]) {
+         VMSTATE_UINT32(tx_descriptor[1], IMXFECState),
+         VMSTATE_UINT32(tx_descriptor[2], IMXFECState),
+         VMSTATE_END_OF_LIST()
+    }
+};
+
 static const VMStateDescription vmstate_imx_eth = {
     .name = TYPE_IMX_FEC,
     .version_id = 2,
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_eth = {
     .fields = (VMStateField[]) {
         VMSTATE_UINT32_ARRAY(regs, IMXFECState, ENET_MAX),
         VMSTATE_UINT32(rx_descriptor, IMXFECState),
-        VMSTATE_UINT32(tx_descriptor, IMXFECState),
-
+        VMSTATE_UINT32(tx_descriptor[0], IMXFECState),
         VMSTATE_UINT32(phy_status, IMXFECState),
         VMSTATE_UINT32(phy_control, IMXFECState),
         VMSTATE_UINT32(phy_advertise, IMXFECState),
         VMSTATE_UINT32(phy_int, IMXFECState),
         VMSTATE_UINT32(phy_int_mask, IMXFECState),
         VMSTATE_END_OF_LIST()
-    }
+    },
+    .subsections = (const VMStateDescription * []) {
+        &vmstate_imx_eth_txdescs,
+        NULL
+    },
 };
 
 #define PHY_INT_ENERGYON            (1 << 7)
@@ -XXX,XX +XXX,XX @@ static void imx_fec_do_tx(IMXFECState *s)
 {
     int frame_size = 0, descnt = 0;
     uint8_t *ptr = s->frame;
-    uint32_t addr = s->tx_descriptor;
+    uint32_t addr = s->tx_descriptor[0];
 
     while (descnt++ < IMX_MAX_DESC) {
         IMXFECBufDesc bd;
@@ -XXX,XX +XXX,XX @@ static void imx_fec_do_tx(IMXFECState *s)
         }
     }
 
-    s->tx_descriptor = addr;
+    s->tx_descriptor[0] = addr;
 
     imx_eth_update(s);
 }
 
-static void imx_enet_do_tx(IMXFECState *s)
+static void imx_enet_do_tx(IMXFECState *s, uint32_t index)
 {
     int frame_size = 0, descnt = 0;
+
     uint8_t *ptr = s->frame;
-    uint32_t addr = s->tx_descriptor;
+    uint32_t addr, int_txb, int_txf, tdsr;
+    size_t ring;
+
+    switch (index) {
+    case ENET_TDAR:
+        ring    = 0;
+        int_txb = ENET_INT_TXB;
+        int_txf = ENET_INT_TXF;
+        tdsr    = ENET_TDSR;
+        break;
+    case ENET_TDAR1:
+        ring    = 1;
+        int_txb = ENET_INT_TXB1;
+        int_txf = ENET_INT_TXF1;
+        tdsr    = ENET_TDSR1;
+        break;
+    case ENET_TDAR2:
+        ring    = 2;
+        int_txb = ENET_INT_TXB2;
+        int_txf = ENET_INT_TXF2;
+        tdsr    = ENET_TDSR2;
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: bogus value for index %x\n",
+                      __func__, index);
+        abort();
+        break;
+    }
+
+    addr = s->tx_descriptor[ring];
 
     while (descnt++ < IMX_MAX_DESC) {
         IMXENETBufDesc bd;
@@ -XXX,XX +XXX,XX @@ static void imx_enet_do_tx(IMXFECState *s)
 
             frame_size = 0;
             if (bd.option & ENET_BD_TX_INT) {
-                s->regs[ENET_EIR] |= ENET_INT_TXF;
+                s->regs[ENET_EIR] |= int_txf;
             }
         }
         if (bd.option & ENET_BD_TX_INT) {
-            s->regs[ENET_EIR] |= ENET_INT_TXB;
+            s->regs[ENET_EIR] |= int_txb;
         }
         bd.flags &= ~ENET_BD_R;
         /* Write back the modified descriptor.  */
         imx_enet_write_bd(&bd, addr);
         /* Advance to the next descriptor.  */
         if ((bd.flags & ENET_BD_W) != 0) {
-            addr = s->regs[ENET_TDSR];
+            addr = s->regs[tdsr];
         } else {
             addr += sizeof(bd);
         }
     }
 
-    s->tx_descriptor = addr;
+    s->tx_descriptor[ring] = addr;
 
     imx_eth_update(s);
 }
 
-static void imx_eth_do_tx(IMXFECState *s)
+static void imx_eth_do_tx(IMXFECState *s, uint32_t index)
 {
     if (!s->is_fec && (s->regs[ENET_ECR] & ENET_ECR_EN1588)) {
-        imx_enet_do_tx(s);
+        imx_enet_do_tx(s, index);
     } else {
         imx_fec_do_tx(s);
     }
@@ -XXX,XX +XXX,XX @@ static void imx_eth_reset(DeviceState *d)
     }
 
     s->rx_descriptor = 0;
-    s->tx_descriptor = 0;
+    memset(s->tx_descriptor, 0, sizeof(s->tx_descriptor));
 
     /* We also reset the PHY */
     phy_reset(s);
@@ -XXX,XX +XXX,XX @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value,
                            unsigned size)
 {
     IMXFECState *s = IMX_FEC(opaque);
+    const bool single_tx_ring = !imx_eth_is_multi_tx_ring(s);
     uint32_t index = offset >> 2;
 
     FEC_PRINTF("reg[%s] <= 0x%" PRIx32 "\n", imx_eth_reg_name(s, index),
@@ -XXX,XX +XXX,XX @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value,
             s->regs[index] = 0;
         }
         break;
-    case ENET_TDAR:
+    case ENET_TDAR1:    /* FALLTHROUGH */
+    case ENET_TDAR2:    /* FALLTHROUGH */
+        if (unlikely(single_tx_ring)) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "[%s]%s: trying to access TDAR2 or TDAR1\n",
+                          TYPE_IMX_FEC, __func__);
+            return;
+        }
+    case ENET_TDAR:     /* FALLTHROUGH */
         if (s->regs[ENET_ECR] & ENET_ECR_ETHEREN) {
             s->regs[index] = ENET_TDAR_TDAR;
-            imx_eth_do_tx(s);
+            imx_eth_do_tx(s, index);
         }
         s->regs[index] = 0;
         break;
@@ -XXX,XX +XXX,XX @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value,
         if ((s->regs[index] & ENET_ECR_ETHEREN) == 0) {
             s->regs[ENET_RDAR] = 0;
             s->rx_descriptor = s->regs[ENET_RDSR];
-            s->regs[ENET_TDAR] = 0;
-            s->tx_descriptor = s->regs[ENET_TDSR];
+            s->regs[ENET_TDAR]  = 0;
+            s->regs[ENET_TDAR1] = 0;
+            s->regs[ENET_TDAR2] = 0;
+            s->tx_descriptor[0] = s->regs[ENET_TDSR];
+            s->tx_descriptor[1] = s->regs[ENET_TDSR1];
+            s->tx_descriptor[2] = s->regs[ENET_TDSR2];
         }
         break;
     case ENET_MMFR:
@@ -XXX,XX +XXX,XX @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value,
         } else {
             s->regs[index] = value & ~7;
         }
-        s->tx_descriptor = s->regs[index];
+        s->tx_descriptor[0] = s->regs[index];
+        break;
+    case ENET_TDSR1:
+        if (unlikely(single_tx_ring)) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "[%s]%s: trying to access TDSR1\n",
+                          TYPE_IMX_FEC, __func__);
+            return;
+        }
+
+        s->regs[index] = value & ~7;
+        s->tx_descriptor[1] = s->regs[index];
+        break;
+    case ENET_TDSR2:
+        if (unlikely(single_tx_ring)) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "[%s]%s: trying to access TDSR2\n",
+                          TYPE_IMX_FEC, __func__);
+            return;
+        }
+
+        s->regs[index] = value & ~7;
+        s->tx_descriptor[2] = s->regs[index];
         break;
     case ENET_MRBR:
         s->regs[index] = value & 0x00003ff0;
@@ -XXX,XX +XXX,XX @@ static void imx_eth_realize(DeviceState *dev, Error **errp)
 
 static Property imx_eth_properties[] = {
     DEFINE_NIC_PROPERTIES(IMXFECState, conf),
+    DEFINE_PROP_UINT32("tx-ring-num", IMXFECState, tx_ring_num, 1),
     DEFINE_PROP_END_OF_LIST(),
 };
 
-- 
2.7.4

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Use 'frame_size' instead of 'len' when calling qemu_send_packet(),
failing to do so results in malformed packets send in case when that
packed is fragmented into multiple DMA transactions.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/imx_fec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -XXX,XX +XXX,XX @@ static void imx_enet_do_tx(IMXFECState *s, uint32_t index)
             }
             /* Last buffer in frame.  */
 
-            qemu_send_packet(qemu_get_queue(s->nic), s->frame, len);
+            qemu_send_packet(qemu_get_queue(s->nic), s->frame, frame_size);
             ptr = s->frame;
 
             frame_size = 0;
-- 
2.7.4

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Some i.MX SoCs (e.g. i.MX7) have FEC registers going as far as offset
0x614, so to avoid getting aborts when accessing those on QEMU, extend
the register file to cover FSL_IMX25_FEC_SIZE(16K) of address space
instead of just 1K.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/fsl-imx25.h | 1 -
 include/hw/net/imx_fec.h   | 1 +
 hw/net/imx_fec.c           | 2 +-
 3 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/hw/arm/fsl-imx25.h b/include/hw/arm/fsl-imx25.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx25.h
+++ b/include/hw/arm/fsl-imx25.h
@@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State {
 #define FSL_IMX25_UART5_ADDR    0x5002C000
 #define FSL_IMX25_UART5_SIZE    0x4000
 #define FSL_IMX25_FEC_ADDR      0x50038000
-#define FSL_IMX25_FEC_SIZE      0x4000
 #define FSL_IMX25_CCM_ADDR      0x53F80000
 #define FSL_IMX25_CCM_SIZE      0x4000
 #define FSL_IMX25_GPT4_ADDR     0x53F84000
diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/net/imx_fec.h
+++ b/include/hw/net/imx_fec.h
@@ -XXX,XX +XXX,XX @@ typedef struct {
 
 #define ENET_TX_RING_NUM       3
 
+#define FSL_IMX25_FEC_SIZE      0x4000
 
 typedef struct IMXFECState {
     /*< private >*/
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -XXX,XX +XXX,XX @@ static void imx_eth_realize(DeviceState *dev, Error **errp)
     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
 
     memory_region_init_io(&s->iomem, OBJECT(dev), &imx_eth_ops, s,
-                          TYPE_IMX_FEC, 0x400);
+                          TYPE_IMX_FEC, FSL_IMX25_FEC_SIZE);
     sysbus_init_mmio(sbd, &s->iomem);
     sysbus_init_irq(sbd, &s->irq[0]);
     sysbus_init_irq(sbd, &s->irq[1]);
-- 
2.7.4

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180103224208.30291-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/timer/pxa2xx_timer.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/hw/timer/pxa2xx_timer.c b/hw/timer/pxa2xx_timer.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/pxa2xx_timer.c
+++ b/hw/timer/pxa2xx_timer.c
@@ -XXX,XX +XXX,XX @@
 #include "sysemu/sysemu.h"
 #include "hw/arm/pxa.h"
 #include "hw/sysbus.h"
+#include "qemu/log.h"
 
 #define OSMR0	0x00
 #define OSMR1	0x04
@@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_timer_read(void *opaque, hwaddr offset,
     case OSNR:
         return s->snapshot;
     default:
+        qemu_log_mask(LOG_UNIMP,
+                      "%s: unknown register 0x%02" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
     badreg:
-        hw_error("pxa2xx_timer_read: Bad offset " REG_FMT "\n", offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: incorrect register 0x%02" HWADDR_PRIx "\n",
+                      __func__, offset);
     }
 
     return 0;
@@ -XXX,XX +XXX,XX @@ static void pxa2xx_timer_write(void *opaque, hwaddr offset,
         }
         break;
     default:
+        qemu_log_mask(LOG_UNIMP,
+                      "%s: unknown register 0x%02" HWADDR_PRIx " "
+                      "(value 0x%08" PRIx64 ")\n",  __func__, offset, value);
+        break;
     badreg:
-        hw_error("pxa2xx_timer_write: Bad offset " REG_FMT "\n", offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: incorrect register 0x%02" HWADDR_PRIx " "
+                      "(value 0x%08" PRIx64 ")\n", __func__, offset, value);
     }
 }
 
-- 
2.7.4

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180104000156.30932-1-f4bug@amsat.org
[PMM: add missing include]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/pxa2xx_mmci.c | 78 ++++++++++++++++++++++++++++++++++-------------------
 hw/sd/trace-events  |  4 +++
 2 files changed, 54 insertions(+), 28 deletions(-)

diff --git a/hw/sd/pxa2xx_mmci.c b/hw/sd/pxa2xx_mmci.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/sd/pxa2xx_mmci.c
+++ b/hw/sd/pxa2xx_mmci.c
@@ -XXX,XX +XXX,XX @@
 #include "hw/qdev.h"
 #include "hw/qdev-properties.h"
 #include "qemu/error-report.h"
+#include "qemu/log.h"
+#include "trace.h"
 
 #define TYPE_PXA2XX_MMCI "pxa2xx-mmci"
 #define PXA2XX_MMCI(obj) OBJECT_CHECK(PXA2xxMMCIState, (obj), TYPE_PXA2XX_MMCI)
@@ -XXX,XX +XXX,XX @@ static void pxa2xx_mmci_wakequeues(PXA2xxMMCIState *s)
 static uint64_t pxa2xx_mmci_read(void *opaque, hwaddr offset, unsigned size)
 {
     PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
-    uint32_t ret;
+    uint32_t ret = 0;
 
     switch (offset) {
     case MMC_STRPCL:
-        return 0;
+        break;
     case MMC_STAT:
-        return s->status;
+        ret = s->status;
+        break;
     case MMC_CLKRT:
-        return s->clkrt;
+        ret = s->clkrt;
+        break;
     case MMC_SPI:
-        return s->spi;
+        ret = s->spi;
+        break;
     case MMC_CMDAT:
-        return s->cmdat;
+        ret = s->cmdat;
+        break;
     case MMC_RESTO:
-        return s->resp_tout;
+        ret = s->resp_tout;
+        break;
     case MMC_RDTO:
-        return s->read_tout;
+        ret = s->read_tout;
+        break;
     case MMC_BLKLEN:
-        return s->blklen;
+        ret = s->blklen;
+        break;
     case MMC_NUMBLK:
-        return s->numblk;
+        ret = s->numblk;
+        break;
     case MMC_PRTBUF:
-        return 0;
+        break;
     case MMC_I_MASK:
-        return s->intmask;
+        ret = s->intmask;
+        break;
     case MMC_I_REG:
-        return s->intreq;
+        ret = s->intreq;
+        break;
     case MMC_CMD:
-        return s->cmd | 0x40;
+        ret = s->cmd | 0x40;
+        break;
     case MMC_ARGH:
-        return s->arg >> 16;
+        ret = s->arg >> 16;
+        break;
     case MMC_ARGL:
-        return s->arg & 0xffff;
+        ret = s->arg & 0xffff;
+        break;
     case MMC_RES:
-        if (s->resp_len < 9)
-            return s->resp_fifo[s->resp_len ++];
-        return 0;
+        ret = (s->resp_len < 9) ? s->resp_fifo[s->resp_len++] : 0;
+        break;
     case MMC_RXFIFO:
-        ret = 0;
         while (size-- && s->rx_len) {
             ret |= s->rx_fifo[s->rx_start++] << (size << 3);
             s->rx_start &= 0x1f;
@@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_mmci_read(void *opaque, hwaddr offset, unsigned size)
         }
         s->intreq &= ~INT_RXFIFO_REQ;
         pxa2xx_mmci_fifo_update(s);
-        return ret;
+        break;
     case MMC_RDWAIT:
-        return 0;
+        break;
     case MMC_BLKS_REM:
-        return s->numblk;
+        ret = s->numblk;
+        break;
     default:
-        hw_error("%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: incorrect register 0x%02" HWADDR_PRIx "\n",
+                      __func__, offset);
     }
+    trace_pxa2xx_mmci_read(size, offset, ret);
 
-    return 0;
+    return ret;
 }
 
 static void pxa2xx_mmci_write(void *opaque,
@@ -XXX,XX +XXX,XX @@ static void pxa2xx_mmci_write(void *opaque,
 {
     PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
 
+    trace_pxa2xx_mmci_write(size, offset, value);
     switch (offset) {
     case MMC_STRPCL:
         if (value & STRPCL_STRT_CLK) {
@@ -XXX,XX +XXX,XX @@ static void pxa2xx_mmci_write(void *opaque,
 
     case MMC_SPI:
         s->spi = value & 0xf;
-        if (value & SPI_SPI_MODE)
-            printf("%s: attempted to use card in SPI mode\n", __FUNCTION__);
+        if (value & SPI_SPI_MODE) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "%s: attempted to use card in SPI mode\n", __func__);
+        }
         break;
 
     case MMC_CMDAT:
@@ -XXX,XX +XXX,XX @@ static void pxa2xx_mmci_write(void *opaque,
         break;
 
     default:
-        hw_error("%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: incorrect reg 0x%02" HWADDR_PRIx " "
+                      "(value 0x%08" PRIx64 ")\n", __func__, offset, value);
     }
 }
 
diff --git a/hw/sd/trace-events b/hw/sd/trace-events
index XXXXXXX..XXXXXXX 100644
--- a/hw/sd/trace-events
+++ b/hw/sd/trace-events
@@ -XXX,XX +XXX,XX @@
 # hw/sd/milkymist-memcard.c
 milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
 milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
+
+# hw/sd/pxa2xx_mmci.c
+pxa2xx_mmci_read(uint8_t size, uint32_t addr, uint32_t value) "size %d addr 0x%02x value 0x%08x"
+pxa2xx_mmci_write(uint8_t size, uint32_t addr, uint32_t value) "size %d addr 0x%02x value 0x%08x"
-- 
2.7.4

Our copy of the nwfpe code for emulating of the old FPA11 floating
point unit doesn't check the coprocessor number in the instruction
when it emulates it.  This means that we might treat some
instructions which should really UNDEF as being FPA11 instructions by
accident.

The kernel's copy of the nwfpe code doesn't make this error; I suspect
the bug was noticed and fixed as part of the process of mainlining
the nwfpe code more than a decade ago.

Add a check that the coprocessor number (which is always in bits
[11:8] of the instruction) is either 1 or 2, which is where the
FPA11 lives.

Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 linux-user/arm/nwfpe/fpa11.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/linux-user/arm/nwfpe/fpa11.c b/linux-user/arm/nwfpe/fpa11.c
index XXXXXXX..XXXXXXX 100644
--- a/linux-user/arm/nwfpe/fpa11.c
+++ b/linux-user/arm/nwfpe/fpa11.c
@@ -XXX,XX +XXX,XX @@ unsigned int EmulateAll(unsigned int opcode, FPA11* qfpa, CPUARMState* qregs)
   unsigned int nRc = 0;
 //  unsigned long flags;
   FPA11 *fpa11;
+  unsigned int cp;
 //  save_flags(flags); sti();
 
+  /* Check that this is really an FPA11 instruction: the coprocessor
+   * field in bits [11:8] must be 1 or 2.
+   */
+  cp = (opcode >> 8) & 0xf;
+  if (cp != 1 && cp != 2) {
+    return 0;
+  }
+
   qemufpa=qfpa;
   user_registers=qregs;
 
-- 
2.7.4

Refactor disas_thumb2_insn() so that it generates the code for raising
an UNDEF exception for invalid insns, rather than returning a flag
which the caller must check to see if it needs to generate the UNDEF
code. This brings the function in to line with the behaviour of
disas_thumb_insn() and disas_arm_insn().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1513080506-17703-1-git-send-email-peter.maydell@linaro.org
---
 target/arm/translate.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@ gen_thumb2_data_op(DisasContext *s, int op, int conds, uint32_t shifter_out,
     return 0;
 }
 
-/* Translate a 32-bit thumb instruction.  Returns nonzero if the instruction
-   is not legal.  */
-static int disas_thumb2_insn(DisasContext *s, uint32_t insn)
+/* Translate a 32-bit thumb instruction. */
+static void disas_thumb2_insn(DisasContext *s, uint32_t insn)
 {
     uint32_t imm, shift, offset;
     uint32_t rd, rn, rm, rs;
@@ -XXX,XX +XXX,XX @@ static int disas_thumb2_insn(DisasContext *s, uint32_t insn)
                     /* UNPREDICTABLE, unallocated hint or
                      * PLD/PLDW/PLI (literal)
                      */
-                    return 0;
+                    return;
                 }
                 if (op1 & 1) {
-                    return 0; /* PLD/PLDW/PLI or unallocated hint */
+                    return; /* PLD/PLDW/PLI or unallocated hint */
                 }
                 if ((op2 == 0) || ((op2 & 0x3c) == 0x30)) {
-                    return 0; /* PLD/PLDW/PLI or unallocated hint */
+                    return; /* PLD/PLDW/PLI or unallocated hint */
                 }
                 /* UNDEF space, or an UNPREDICTABLE */
-                return 1;
+                goto illegal_op;
             }
         }
         memidx = get_mem_index(s);
@@ -XXX,XX +XXX,XX @@ static int disas_thumb2_insn(DisasContext *s, uint32_t insn)
     default:
         goto illegal_op;
     }
-    return 0;
+    return;
 illegal_op:
-    return 1;
+    gen_exception_insn(s, 4, EXCP_UDEF, syn_uncategorized(),
+                       default_exception_el(s));
 }
 
 static void disas_thumb_insn(DisasContext *s, uint32_t insn)
@@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu)
     if (is_16bit) {
         disas_thumb_insn(dc, insn);
     } else {
-        if (disas_thumb2_insn(dc, insn)) {
-            gen_exception_insn(dc, 4, EXCP_UDEF, syn_uncategorized(),
-                               default_exception_el(dc));
-        }
+        disas_thumb2_insn(dc, insn);
     }
 
     /* Advance the Thumb condexec condition.  */
-- 
2.7.4

The GICv3 specification says that reserved register addresses
should RAZ/WI. This means we need to return MEMTX_OK, not MEMTX_ERROR,
because now that we support generating external aborts the
latter will cause an abort on new board models.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1513183941-24300-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
---
 hw/intc/arm_gicv3_dist.c       | 13 +++++++++++++
 hw/intc/arm_gicv3_its_common.c |  8 +++-----
 hw/intc/arm_gicv3_redist.c     | 13 +++++++++++++
 3 files changed, 29 insertions(+), 5 deletions(-)

diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/intc/arm_gicv3_dist.c
+++ b/hw/intc/arm_gicv3_dist.c
@@ -XXX,XX +XXX,XX @@ MemTxResult gicv3_dist_read(void *opaque, hwaddr offset, uint64_t *data,
                       "%s: invalid guest read at offset " TARGET_FMT_plx
                       "size %u\n", __func__, offset, size);
         trace_gicv3_dist_badread(offset, size, attrs.secure);
+        /* The spec requires that reserved registers are RAZ/WI;
+         * so use MEMTX_ERROR returns from leaf functions as a way to
+         * trigger the guest-error logging but don't return it to
+         * the caller, or we'll cause a spurious guest data abort.
+         */
+        r = MEMTX_OK;
+        *data = 0;
     } else {
         trace_gicv3_dist_read(offset, *data, size, attrs.secure);
     }
@@ -XXX,XX +XXX,XX @@ MemTxResult gicv3_dist_write(void *opaque, hwaddr offset, uint64_t data,
                       "%s: invalid guest write at offset " TARGET_FMT_plx
                       "size %u\n", __func__, offset, size);
         trace_gicv3_dist_badwrite(offset, data, size, attrs.secure);
+        /* The spec requires that reserved registers are RAZ/WI;
+         * so use MEMTX_ERROR returns from leaf functions as a way to
+         * trigger the guest-error logging but don't return it to
+         * the caller, or we'll cause a spurious guest data abort.
+         */
+        r = MEMTX_OK;
     } else {
         trace_gicv3_dist_write(offset, data, size, attrs.secure);
     }
diff --git a/hw/intc/arm_gicv3_its_common.c b/hw/intc/arm_gicv3_its_common.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/intc/arm_gicv3_its_common.c
+++ b/hw/intc/arm_gicv3_its_common.c
@@ -XXX,XX +XXX,XX @@ static MemTxResult gicv3_its_trans_read(void *opaque, hwaddr offset,
                                         MemTxAttrs attrs)
 {
     qemu_log_mask(LOG_GUEST_ERROR, "ITS read at offset 0x%"PRIx64"\n", offset);
-    return MEMTX_ERROR;
+    *data = 0;
+    return MEMTX_OK;
 }
 
 static MemTxResult gicv3_its_trans_write(void *opaque, hwaddr offset,
@@ -XXX,XX +XXX,XX @@ static MemTxResult gicv3_its_trans_write(void *opaque, hwaddr offset,
         if (ret <= 0) {
             qemu_log_mask(LOG_GUEST_ERROR,
                           "ITS: Error sending MSI: %s\n", strerror(-ret));
-            return MEMTX_DECODE_ERROR;
         }
-
-        return MEMTX_OK;
     } else {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "ITS write at bad offset 0x%"PRIx64"\n", offset);
-        return MEMTX_DECODE_ERROR;
     }
+    return MEMTX_OK;
 }
 
 static const MemoryRegionOps gicv3_its_trans_ops = {
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -XXX,XX +XXX,XX @@ MemTxResult gicv3_redist_read(void *opaque, hwaddr offset, uint64_t *data,
                       "size %u\n", __func__, offset, size);
         trace_gicv3_redist_badread(gicv3_redist_affid(cs), offset,
                                    size, attrs.secure);
+        /* The spec requires that reserved registers are RAZ/WI;
+         * so use MEMTX_ERROR returns from leaf functions as a way to
+         * trigger the guest-error logging but don't return it to
+         * the caller, or we'll cause a spurious guest data abort.
+         */
+        r = MEMTX_OK;
+        *data = 0;
     } else {
         trace_gicv3_redist_read(gicv3_redist_affid(cs), offset, *data,
                                 size, attrs.secure);
@@ -XXX,XX +XXX,XX @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
                       "size %u\n", __func__, offset, size);
         trace_gicv3_redist_badwrite(gicv3_redist_affid(cs), offset, data,
                                     size, attrs.secure);
+        /* The spec requires that reserved registers are RAZ/WI;
+         * so use MEMTX_ERROR returns from leaf functions as a way to
+         * trigger the guest-error logging but don't return it to
+         * the caller, or we'll cause a spurious guest data abort.
+         */
+        r = MEMTX_OK;
     } else {
         trace_gicv3_redist_write(gicv3_redist_affid(cs), offset, data,
                                  size, attrs.secure);
-- 
2.7.4

The GICv2 specification says that reserved register addresses
must RAZ/WI; now that we implement external abort handling
for Arm CPUs this means we must return MEMTX_OK rather than
MEMTX_ERROR, to avoid generating a spurious guest data abort.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1513183941-24300-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
---
 hw/intc/arm_gic.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/intc/arm_gic.c
+++ b/hw/intc/arm_gic.c
@@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_read(GICState *s, int cpu, int offset,
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "gic_cpu_read: Bad offset %x\n", (int)offset);
-        return MEMTX_ERROR;
+        *data = 0;
+        break;
     }
     return MEMTX_OK;
 }
@@ -XXX,XX +XXX,XX @@ static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset,
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "gic_cpu_write: Bad offset %x\n", (int)offset);
-        return MEMTX_ERROR;
+        return MEMTX_OK;
     }
     gic_update(s);
     return MEMTX_OK;
-- 
2.7.4

v3->v4: Windows headers define an INT type which clashed
with an enum value name in arm_gicv3_its.c...

The following changes since commit eae587e8e3694b1aceab23239493fb4c7e1a80f5:

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-09-13' into staging (2021-09-13 11:00:30 +0100)

are available in the Git repository at:

https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210913-3

for you to fetch changes up to 28e987a7e7edaa3ca7feeac65edca26145df8814:

hw/arm/mps2.c: Mark internal-only I2C buses as 'full' (2021-09-13 21:01:08 +0100)

----------------------------------------------------------------
target-arm queue:
 * mark MPS2/MPS3 board-internal i2c buses as 'full' so that command
   line user-created devices are not plugged into them
 * Take an exception if PSTATE.IL is set
 * Support an emulated ITS in the virt board
 * Add support for kudo-bmc board
 * Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM
 * cadence_uart: Fix clock handling issues that prevented
   u-boot from running

----------------------------------------------------------------
Bin Meng (6):
      hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase
      hw/char: cadence_uart: Disable transmit when input clock is disabled
      hw/char: cadence_uart: Move clock/reset check to uart_can_receive()
      hw/char: cadence_uart: Convert to memop_with_attrs() ops
      hw/char: cadence_uart: Ignore access when unclocked or in reset for uart_{read, write}()
      hw/char: cadence_uart: Log a guest error when device is unclocked or in reset

Chris Rauer (1):
      hw/arm: Add support for kudo-bmc board.

Marc Zyngier (1):
      hw/arm/virt: KVM: Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM

Peter Maydell (5):
      target/arm: Take an exception if PSTATE.IL is set
      qdev: Support marking individual buses as 'full'
      hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn
      hw/arm/mps2-tz.c: Mark internal-only I2C buses as 'full'
      hw/arm/mps2.c: Mark internal-only I2C buses as 'full'

Richard Henderson (1):
      target/arm: Merge disas_a64_insn into aarch64_tr_translate_insn

Shashi Mallela (9):
      hw/intc: GICv3 ITS initial framework
      hw/intc: GICv3 ITS register definitions added
      hw/intc: GICv3 ITS command queue framework
      hw/intc: GICv3 ITS Command processing
      hw/intc: GICv3 ITS Feature enablement
      hw/intc: GICv3 redistributor ITS processing
      tests/data/acpi/virt: Add IORT files for ITS
      hw/arm/virt: add ITS support in virt GIC
      tests/data/acpi/virt: Update IORT files for ITS