Series comparison

ARM queue: nothing particularly exciting here, but no
reason to sit on them for another week.

thanks
-- PMM

The following changes since commit 61eedf7aec0e2395aabd628cc055096909a3ea15:

tests/prom-env: Ease time-out problems on slow hosts (2017-02-10 15:44:53 +0000)

are available in the git repository at:

git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170210

for you to fetch changes up to b4cc583f0285a2e1e78621dfba142f00ca47414a:

aspeed/smc: use a modulo to check segment limits (2017-02-10 17:40:30 +0000)

----------------------------------------------------------------
target-arm queue:
 * aspeed: minor fixes
 * virt: declare fwcfg and virtio-mmio as DMA coherent in DT & ACPI
 * arm: enable basic TCG emulation of PMU for AArch64

----------------------------------------------------------------
Alexander Graf (4):
      target-arm: Declare virtio-mmio as dma-coherent in dt
      hw/arm/virt: Declare virtio-mmio as dma cache coherent in ACPI
      hw/arm/virt: Declare fwcfg as dma cache coherent in ACPI
      hw/arm/virt: Declare fwcfg as dma cache coherent in dt

Cédric Le Goater (4):
      aspeed: check for negative values returned by blk_getlength()
      aspeed: remove useless comment on controller segment size
      aspeed/smc: handle dummies only in fast read mode
      aspeed/smc: use a modulo to check segment limits

Wei Huang (4):
      target-arm: Add support for PMU register PMSELR_EL0
      target-arm: Add support for AArch64 PMU register PMXEVTYPER_EL0
      target-arm: Add support for PMU register PMINTENSET_EL1
      target-arm: Enable vPMU support under TCG mode

From: Wei Huang <wei@redhat.com>

This patch adds support for AArch64 register PMSELR_EL0. The existing
PMSELR definition is revised accordingly.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Moved #ifndef CONFIG_USER_ONLY to cover new regdefs]
Message-id: 1486504171-26807-2-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h    |  1 +
 target/arm/helper.c | 27 +++++++++++++++++++++------
 2 files changed, 22 insertions(+), 6 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState {
         uint32_t c9_pmovsr; /* perf monitor overflow status */
         uint32_t c9_pmxevtyper; /* perf monitor event type */
         uint32_t c9_pmuserenr; /* perf monitor user enable */
+        uint64_t c9_pmselr; /* perf monitor counter selection register */
         uint32_t c9_pminten; /* perf monitor interrupt enables */
         union { /* Memory attribute redirection */
             struct {
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri)
     return total_ticks - env->cp15.c15_ccnt;
 }
 
+static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+                         uint64_t value)
+{
+    /* The value of PMSELR.SEL affects the behavior of PMXEVTYPER and
+     * PMXEVCNTR. We allow [0..31] to be written to PMSELR here; in the
+     * meanwhile, we check PMSELR.SEL when PMXEVTYPER and PMXEVCNTR are
+     * accessed.
+     */
+    env->cp15.c9_pmselr = value & 0x1f;
+}
+
 static void pmccntr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                         uint64_t value)
 {
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
     /* Unimplemented so WI. */
     { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4,
       .access = PL0_W, .accessfn = pmreg_access, .type = ARM_CP_NOP },
-    /* Since we don't implement any events, writing to PMSELR is UNPREDICTABLE.
-     * We choose to RAZ/WI.
-     */
-    { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
-      .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
-      .accessfn = pmreg_access },
 #ifndef CONFIG_USER_ONLY
+    { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
+      .access = PL0_RW, .type = ARM_CP_ALIAS,
+      .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr),
+      .accessfn = pmreg_access, .writefn = pmselr_write,
+      .raw_writefn = raw_write},
+    { .name = "PMSELR_EL0", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 5,
+      .access = PL0_RW, .accessfn = pmreg_access,
+      .fieldoffset = offsetof(CPUARMState, cp15.c9_pmselr),
+      .writefn = pmselr_write, .raw_writefn = raw_write, },
     { .name = "PMCCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 0,
       .access = PL0_RW, .resetvalue = 0, .type = ARM_CP_IO,
       .readfn = pmccntr_read, .writefn = pmccntr_write32,
-- 
2.7.4

From: Wei Huang <wei@redhat.com>

In order to support Linux perf, which uses PMXEVTYPER register,
this patch adds read/write access support for PMXEVTYPER. The access
is CONSTRAINED UNPREDICTABLE when PMSELR is not 0x1f. Additionally
this patch adds support for PMXEVTYPER_EL0.

Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1486504171-26807-3-git-send-email-wei@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h    |  1 -
 target/arm/helper.c | 30 +++++++++++++++++++++++++-----
 2 files changed, 25 insertions(+), 6 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState {
         uint64_t c9_pmcr; /* performance monitor control register */
         uint64_t c9_pmcnten; /* perf monitor counter enables */
         uint32_t c9_pmovsr; /* perf monitor overflow status */
-        uint32_t c9_pmxevtyper; /* perf monitor event type */
         uint32_t c9_pmuserenr; /* perf monitor user enable */
         uint64_t c9_pmselr; /* perf monitor counter selection register */
         uint32_t c9_pminten; /* perf monitor interrupt enables */
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri,
 static void pmxevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri,
                              uint64_t value)
 {
-    env->cp15.c9_pmxevtyper = value & 0xff;
+    /* Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when
+     * PMSELR value is equal to or greater than the number of implemented
+     * counters, but not equal to 0x1f. We opt to behave as a RAZ/WI.
+     */
+    if (env->cp15.c9_pmselr == 0x1f) {
+        pmccfiltr_write(env, ri, value);
+    }
+}
+
+static uint64_t pmxevtyper_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+    /* We opt to behave as a RAZ/WI when attempts to access PMXEVTYPER
+     * are CONSTRAINED UNPREDICTABLE. See comments in pmxevtyper_write().
+     */
+    if (env->cp15.c9_pmselr == 0x1f) {
+        return env->cp15.pmccfiltr_el0;
+    } else {
+        return 0;
+    }
 }
 
 static void pmuserenr_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .fieldoffset = offsetof(CPUARMState, cp15.pmccfiltr_el0),
       .resetvalue = 0, },
     { .name = "PMXEVTYPER", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 1,
-      .access = PL0_RW,
-      .fieldoffset = offsetof(CPUARMState, cp15.c9_pmxevtyper),
-      .accessfn = pmreg_access, .writefn = pmxevtyper_write,
-      .raw_writefn = raw_write },
+      .access = PL0_RW, .type = ARM_CP_NO_RAW, .accessfn = pmreg_access,
+      .writefn = pmxevtyper_write, .readfn = pmxevtyper_read },
+    { .name = "PMXEVTYPER_EL0", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 1,
+      .access = PL0_RW, .type = ARM_CP_NO_RAW, .accessfn = pmreg_access,
+      .writefn = pmxevtyper_write, .readfn = pmxevtyper_read },
     /* Unimplemented, RAZ/WI. */
     { .name = "PMXEVCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 2,
       .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
-- 
2.7.4

From: Wei Huang <wei@redhat.com>

This patch adds access support for PMINTENSET_EL1.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1486504171-26807-4-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h    |  2 +-
 target/arm/helper.c | 10 +++++++++-
 2 files changed, 10 insertions(+), 2 deletions(-)

From: Wei Huang <wei@redhat.com>

This patch contains several fixes to enable vPMU under TCG mode. It
first removes the checking of kvm_enabled() while unsetting
ARM_FEATURE_PMU. With it, the .pmu option can be used to turn on/off vPMU
under TCG mode. Secondly the PMU node of DT table is now created under TCG.
The last fix is to disable the masking of PMUver field of ID_AA64DFR0_EL1.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1486504171-26807-5-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/virt.c       | 2 +-
 target/arm/cpu.c    | 2 +-
 target/arm/helper.c | 7 +------
 3 files changed, 3 insertions(+), 8 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -XXX,XX +XXX,XX @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms)
     CPU_FOREACH(cpu) {
         armcpu = ARM_CPU(cpu);
         if (!arm_feature(&armcpu->env, ARM_FEATURE_PMU) ||
-            !kvm_arm_pmu_create(cpu, PPI(VIRTUAL_PMU_IRQ))) {
+            (kvm_enabled() && !kvm_arm_pmu_create(cpu, PPI(VIRTUAL_PMU_IRQ)))) {
             return;
         }
     }
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
         unset_feature(env, ARM_FEATURE_EL2);
     }
 
-    if (!cpu->has_pmu || !kvm_enabled()) {
+    if (!cpu->has_pmu) {
         cpu->has_pmu = false;
         unset_feature(env, ARM_FEATURE_PMU);
     }
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
             { .name = "ID_AA64DFR0_EL1", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 0,
               .access = PL1_R, .type = ARM_CP_CONST,
-              /* We mask out the PMUVer field, because we don't currently
-               * implement the PMU. Not advertising it prevents the guest
-               * from trying to use it and getting UNDEFs on registers we
-               * don't implement.
-               */
-              .resetvalue = cpu->id_aa64dfr0 & ~0xf00 },
+              .resetvalue = cpu->id_aa64dfr0 },
             { .name = "ID_AA64DFR1_EL1", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 1,
               .access = PL1_R, .type = ARM_CP_CONST,
-- 
2.7.4

From: Alexander Graf <agraf@suse.de>

QEMU emulated hardware is always dma coherent with its guest. We do
annotate that correctly on the PCI host controller, but left out
virtio-mmio.

Recent kernels have started to interpret that flag rather than take
dma coherency as granted with virtio-mmio. While that is considered
a kernel bug, as it breaks previously working systems, it showed that
our dt description is incomplete.

This patch adds the respective marker that allows guest OSs to evaluate
that our virtio-mmio devices are indeed cache coherent.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1486644810-33181-2-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/vexpress.c | 1 +
 hw/arm/virt.c     | 1 +
 2 files changed, 2 insertions(+)

diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/vexpress.c
+++ b/hw/arm/vexpress.c
@@ -XXX,XX +XXX,XX @@ static int add_virtio_mmio_node(void *fdt, uint32_t acells, uint32_t scells,
                                        acells, addr, scells, size);
     qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", intc);
     qemu_fdt_setprop_cells(fdt, nodename, "interrupts", 0, irq, 1);
+    qemu_fdt_setprop(fdt, nodename, "dma-coherent", NULL, 0);
     g_free(nodename);
     if (rc) {
         return -1;
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -XXX,XX +XXX,XX @@ static void create_virtio_devices(const VirtMachineState *vms, qemu_irq *pic)
         qemu_fdt_setprop_cells(vms->fdt, nodename, "interrupts",
                                GIC_FDT_IRQ_TYPE_SPI, irq,
                                GIC_FDT_IRQ_FLAGS_EDGE_LO_HI);
+        qemu_fdt_setprop(vms->fdt, nodename, "dma-coherent", NULL, 0);
         g_free(nodename);
     }
 }
-- 
2.7.4

From: Alexander Graf <agraf@suse.de>

Virtio-mmio devices can directly access guest memory and do so in cache
coherent fashion. Tell the guest about that fact when it's using ACPI.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1486644810-33181-3-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/virt-acpi-build.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -XXX,XX +XXX,XX @@ static void acpi_dsdt_add_virtio(Aml *scope,
         Aml *dev = aml_device("VR%02u", i);
         aml_append(dev, aml_name_decl("_HID", aml_string("LNRO0005")));
         aml_append(dev, aml_name_decl("_UID", aml_int(i)));
+        aml_append(dev, aml_name_decl("_CCA", aml_int(1)));
 
         Aml *crs = aml_resource_template();
         aml_append(crs, aml_memory32_fixed(base, size, AML_READ_WRITE));
-- 
2.7.4

From: Alexander Graf <agraf@suse.de>

Fw-cfg recently learned how to directly access guest memory and does so in
cache coherent fashion. Tell the guest about that fact when it's using ACPI.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1486644810-33181-4-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/virt-acpi-build.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -XXX,XX +XXX,XX @@ static void acpi_dsdt_add_fw_cfg(Aml *scope, const MemMapEntry *fw_cfg_memmap)
     aml_append(dev, aml_name_decl("_HID", aml_string("QEMU0002")));
     /* device present, functioning, decoding, not shown in UI */
     aml_append(dev, aml_name_decl("_STA", aml_int(0xB)));
+    aml_append(dev, aml_name_decl("_CCA", aml_int(1)));
 
     Aml *crs = aml_resource_template();
     aml_append(crs, aml_memory32_fixed(fw_cfg_memmap->base,
-- 
2.7.4

From: Alexander Graf <agraf@suse.de>

Fw-cfg recently learned how to directly access guest memory and does so in
cache coherent fashion. Tell the guest about that fact when it's using DT.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1486644810-33181-5-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/virt.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -XXX,XX +XXX,XX @@ static FWCfgState *create_fw_cfg(const VirtMachineState *vms, AddressSpace *as)
                             "compatible", "qemu,fw-cfg-mmio");
     qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                  2, base, 2, size);
+    qemu_fdt_setprop(vms->fdt, nodename, "dma-coherent", NULL, 0);
     g_free(nodename);
     return fw_cfg;
 }
-- 
2.7.4

From: Cédric Le Goater <clg@kaod.org>

write_boot_rom() does not check for negative values. This is more a
problem for coverity than the actual code as the size of the flash
device is checked when the m25p80 object is created. If there is
anything wrong with the backing file, we should not even reach that
path.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1486648058-520-2-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/aspeed.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -XXX,XX +XXX,XX @@ static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size,
 {
     BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
     uint8_t *storage;
+    int64_t size;
 
-    if (rom_size > blk_getlength(blk)) {
-        rom_size = blk_getlength(blk);
+    /* The block backend size should have already been 'validated' by
+     * the creation of the m25p80 object.
+     */
+    size = blk_getlength(blk);
+    if (size <= 0) {
+        error_setg(errp, "failed to get flash size");
+        return;
+    }
+
+    if (rom_size > size) {
+        rom_size = size;
     }
 
     storage = g_new0(uint8_t, rom_size);
-- 
2.7.4

From: Cédric Le Goater <clg@kaod.org>

The flash devices used for the FMC controller (BMC firmware) are well
defined for each Aspeed machine and are all smaller than the default
mapping window size, at least for CE0 which is the chip the SoC boots
from.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1486648058-520-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/aspeed.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -XXX,XX +XXX,XX @@ static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype,
         DriveInfo *dinfo = drive_get_next(IF_MTD);
         qemu_irq cs_line;
 
-        /*
-         * FIXME: check that we are not using a flash module exceeding
-         * the controller segment size
-         */
         fl->flash = ssi_create_slave_no_init(s->spi, flashtype);
         if (dinfo) {
             qdev_prop_set_drive(fl->flash, "drive", blk_by_legacy_dinfo(dinfo),
@@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine,
 
         /*
          * create a ROM region using the default mapping window size of
-         * the flash module.
+         * the flash module. The window size is 64MB for the AST2400
+         * SoC and 128MB for the AST2500 SoC, which is twice as big as
+         * needed by the flash modules of the Aspeed machines.
          */
         memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom",
                                fl->size, &error_abort);
-- 
2.7.4

From: Cédric Le Goater <clg@kaod.org>

HW works fine in normal read mode with dummy bytes being set. So let's
check this case to not transfer bytes.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1486648058-520-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/ssi/aspeed_smc.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/ssi/aspeed_smc.c
+++ b/hw/ssi/aspeed_smc.c
@@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_smc_flash_read(void *opaque, hwaddr addr, unsigned size)
         /*
          * Use fake transfers to model dummy bytes. The value should
          * be configured to some non-zero value in fast read mode and
-         * zero in read mode.
+         * zero in read mode. But, as the HW allows inconsistent
+         * settings, let's check for fast read mode.
          */
-        for (i = 0; i < aspeed_smc_flash_dummies(fl); i++) {
-            ssi_transfer(fl->controller->spi, 0xFF);
+        if (aspeed_smc_flash_mode(fl) == CTRL_FREADMODE) {
+            for (i = 0; i < aspeed_smc_flash_dummies(fl); i++) {
+                ssi_transfer(fl->controller->spi, 0xFF);
+            }
         }
 
         for (i = 0; i < size; i++) {
-- 
2.7.4

From: Cédric Le Goater <clg@kaod.org>

The size of a segment is not necessarily a power of 2.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1486648058-520-5-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/ssi/aspeed_smc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/ssi/aspeed_smc.c
+++ b/hw/ssi/aspeed_smc.c
@@ -XXX,XX +XXX,XX @@ static uint32_t aspeed_smc_check_segment_addr(const AspeedSMCFlash *fl,
     AspeedSegments seg;
 
     aspeed_smc_reg_to_segment(s->regs[R_SEG_ADDR0 + fl->id], &seg);
-    if ((addr & (seg.size - 1)) != addr) {
+    if ((addr % seg.size) != addr) {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: invalid address 0x%08x for CS%d segment : "
                       "[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n",
                       s->ctrl->name, addr, fl->id, seg.addr,
                       seg.addr + seg.size);
+        addr %= seg.size;
     }
 
-    addr &= seg.size - 1;
     return addr;
 }
 
-- 
2.7.4

v3->v4: Windows headers define an INT type which clashed
with an enum value name in arm_gicv3_its.c...

The following changes since commit eae587e8e3694b1aceab23239493fb4c7e1a80f5:

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-09-13' into staging (2021-09-13 11:00:30 +0100)

are available in the Git repository at:

https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210913-3

for you to fetch changes up to 28e987a7e7edaa3ca7feeac65edca26145df8814:

hw/arm/mps2.c: Mark internal-only I2C buses as 'full' (2021-09-13 21:01:08 +0100)

----------------------------------------------------------------
target-arm queue:
 * mark MPS2/MPS3 board-internal i2c buses as 'full' so that command
   line user-created devices are not plugged into them
 * Take an exception if PSTATE.IL is set
 * Support an emulated ITS in the virt board
 * Add support for kudo-bmc board
 * Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM
 * cadence_uart: Fix clock handling issues that prevented
   u-boot from running

----------------------------------------------------------------
Bin Meng (6):
      hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase
      hw/char: cadence_uart: Disable transmit when input clock is disabled
      hw/char: cadence_uart: Move clock/reset check to uart_can_receive()
      hw/char: cadence_uart: Convert to memop_with_attrs() ops
      hw/char: cadence_uart: Ignore access when unclocked or in reset for uart_{read, write}()
      hw/char: cadence_uart: Log a guest error when device is unclocked or in reset

Chris Rauer (1):
      hw/arm: Add support for kudo-bmc board.

Marc Zyngier (1):
      hw/arm/virt: KVM: Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM

Peter Maydell (5):
      target/arm: Take an exception if PSTATE.IL is set
      qdev: Support marking individual buses as 'full'
      hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn
      hw/arm/mps2-tz.c: Mark internal-only I2C buses as 'full'
      hw/arm/mps2.c: Mark internal-only I2C buses as 'full'

Richard Henderson (1):
      target/arm: Merge disas_a64_insn into aarch64_tr_translate_insn

Shashi Mallela (9):
      hw/intc: GICv3 ITS initial framework
      hw/intc: GICv3 ITS register definitions added
      hw/intc: GICv3 ITS command queue framework
      hw/intc: GICv3 ITS Command processing
      hw/intc: GICv3 ITS Feature enablement
      hw/intc: GICv3 redistributor ITS processing
      tests/data/acpi/virt: Add IORT files for ITS
      hw/arm/virt: add ITS support in virt GIC
      tests/data/acpi/virt: Update IORT files for ITS