[libvirt] [PATCH 12/16] gnulib: store result of bootstrap in git

Pavel Hrdina posted 16 patches 36 weeks ago

[libvirt] [PATCH 12/16] gnulib: store result of bootstrap in git

Posted by Pavel Hrdina 36 weeks ago
There is no need to run bootstrap every time a clean git checkout is
done as the result will be always the same.  We only need to run it
when there is some change to gnulib modules or when we update to new
gnulib or there is a change to the build system.  All of the steps
above are done as by developers and therefore it can be part of git.

The benefits are that from this point nothing will modify source dir
when building libvirt, the configure time will be way quicker and it
helps with the planned adoption of Meson as our build system.

The drawbacks are that developers will have to regenerate these files
when doing changes mentioned above and there is a significant amount
of files and code lines part of our git checkout.  However, with the
ongoing effort to eliminate gnulib in favor of GLib all of the gnulib
code will be eventually dropped.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
---
 .git-module-status              |     2 +
 .gitignore                      |    19 -
 INSTALL                         |   368 +
 Makefile.in                     |  2323 ++
 aclocal.m4                      |  1719 +
 build-aux/compile               |   348 +
 build-aux/config.guess          |  1667 +
 build-aux/config.sub            |  1793 +
 build-aux/depcomp               |   791 +
 build-aux/install-sh            |   529 +
 build-aux/ltmain.sh             | 11149 ++++++
 build-aux/missing               |   215 +
 build-aux/syntax-check.mk       |    21 +-
 build-aux/test-driver           |   148 +
 config.h.in                     |  2303 ++
 configure                       | 56615 ++++++++++++++++++++++++++++++
 docs/Makefile.in                |  2614 ++
 examples/Makefile.in            |  2494 ++
 gnulib/lib/Makefile.in          |  3997 +++
 gnulib/lib/_Noreturn.h          |    40 +
 gnulib/lib/accept.c             |    52 +
 gnulib/lib/alloca.c             |   478 +
 gnulib/lib/alloca.in.h          |    71 +
 gnulib/lib/arg-nonnull.h        |    26 +
 gnulib/lib/arpa_inet.in.h       |   150 +
 gnulib/lib/asnprintf.c          |    34 +
 gnulib/lib/assure.h             |    37 +
 gnulib/lib/binary-io.c          |    39 +
 gnulib/lib/binary-io.h          |    77 +
 gnulib/lib/bind.c               |    49 +
 gnulib/lib/c++defs.h            |   316 +
 gnulib/lib/chown.c              |   151 +
 gnulib/lib/cloexec.c            |    83 +
 gnulib/lib/cloexec.h            |    38 +
 gnulib/lib/close.c              |    71 +
 gnulib/lib/connect.c            |    56 +
 gnulib/lib/dup2.c               |   235 +
 gnulib/lib/errno.in.h           |   279 +
 gnulib/lib/fchown-stub.c        |    16 +
 gnulib/lib/fcntl.c              |   627 +
 gnulib/lib/fcntl.in.h           |   392 +
 gnulib/lib/fd-hook.c            |   116 +
 gnulib/lib/fd-hook.h            |   119 +
 gnulib/lib/filename.h           |    54 +
 gnulib/lib/float+.h             |   147 +
 gnulib/lib/float.c              |    33 +
 gnulib/lib/float.in.h           |   188 +
 gnulib/lib/fseek.c              |    30 +
 gnulib/lib/fseeko.c             |   164 +
 gnulib/lib/fstat.c              |    94 +
 gnulib/lib/gai_strerror.c       |    92 +
 gnulib/lib/getaddrinfo.c        |   473 +
 gnulib/lib/getdelim.c           |   147 +
 gnulib/lib/getdtablesize.c      |   124 +
 gnulib/lib/getgroups.c          |   131 +
 gnulib/lib/gethostname.c        |   104 +
 gnulib/lib/getline.c            |    27 +
 gnulib/lib/getpass.c            |   231 +
 gnulib/lib/getpass.h            |     4 +
 gnulib/lib/getpeername.c        |    49 +
 gnulib/lib/getsockname.c        |    49 +
 gnulib/lib/gettext.h            |   301 +
 gnulib/lib/getugroups.c         |   128 +
 gnulib/lib/getugroups.h         |    19 +
 gnulib/lib/glthread/threadlib.c |    73 +
 gnulib/lib/gnulib.mk            |  2806 ++
 gnulib/lib/inet_ntop.c          |   260 +
 gnulib/lib/intprops.h           |   584 +
 gnulib/lib/ioctl.c              |    92 +
 gnulib/lib/itold.c              |    28 +
 gnulib/lib/limits.in.h          |   104 +
 gnulib/lib/listen.c             |    49 +
 gnulib/lib/localcharset.c       |  1159 +
 gnulib/lib/localcharset.h       |   137 +
 gnulib/lib/locale.in.h          |   305 +
 gnulib/lib/localeconv.c         |   103 +
 gnulib/lib/lseek.c              |    71 +
 gnulib/lib/malloc.c             |    56 +
 gnulib/lib/malloca.c            |   105 +
 gnulib/lib/malloca.h            |   123 +
 gnulib/lib/memchr.c             |   172 +
 gnulib/lib/memchr.valgrind      |    30 +
 gnulib/lib/mgetgroups.c         |   201 +
 gnulib/lib/mgetgroups.h         |    22 +
 gnulib/lib/msvc-inval.c         |   129 +
 gnulib/lib/msvc-inval.h         |   222 +
 gnulib/lib/msvc-nothrow.c       |    51 +
 gnulib/lib/msvc-nothrow.h       |    43 +
 gnulib/lib/net_if.in.h          |    53 +
 gnulib/lib/netdb.in.h           |   293 +
 gnulib/lib/netinet_in.in.h      |    47 +
 gnulib/lib/nonblocking.c        |   159 +
 gnulib/lib/nonblocking.h        |    62 +
 gnulib/lib/open.c               |   203 +
 gnulib/lib/openpty.c            |   136 +
 gnulib/lib/passfd.c             |   205 +
 gnulib/lib/passfd.h             |    32 +
 gnulib/lib/pathmax.h            |    83 +
 gnulib/lib/physmem.c            |   330 +
 gnulib/lib/physmem.h            |    26 +
 gnulib/lib/pipe.c               |    50 +
 gnulib/lib/pipe2.c              |   167 +
 gnulib/lib/poll.c               |   621 +
 gnulib/lib/poll.in.h            |   125 +
 gnulib/lib/posix_openpt.c       |   108 +
 gnulib/lib/printf-args.c        |   183 +
 gnulib/lib/printf-args.h        |   150 +
 gnulib/lib/printf-parse.c       |   632 +
 gnulib/lib/printf-parse.h       |   193 +
 gnulib/lib/pthread.in.h         |  1831 +
 gnulib/lib/pthread_sigmask.c    |    92 +
 gnulib/lib/pty.in.h             |   131 +
 gnulib/lib/raise.c              |    83 +
 gnulib/lib/rawmemchr.c          |   136 +
 gnulib/lib/rawmemchr.valgrind   |    28 +
 gnulib/lib/realloc.c            |    79 +
 gnulib/lib/recv.c               |    49 +
 gnulib/lib/sched.in.h           |    97 +
 gnulib/lib/select.c             |   583 +
 gnulib/lib/send.c               |    49 +
 gnulib/lib/setsockopt.c         |    65 +
 gnulib/lib/sig-handler.c        |     3 +
 gnulib/lib/sig-handler.h        |    51 +
 gnulib/lib/sigaction.c          |   204 +
 gnulib/lib/signal.in.h          |   475 +
 gnulib/lib/sigprocmask.c        |   349 +
 gnulib/lib/size_max.h           |    30 +
 gnulib/lib/snprintf.c           |    71 +
 gnulib/lib/socket.c             |    49 +
 gnulib/lib/sockets.c            |   161 +
 gnulib/lib/sockets.h            |    66 +
 gnulib/lib/stat-time.c          |     3 +
 gnulib/lib/stat-time.h          |   252 +
 gnulib/lib/stat-w32.c           |   425 +
 gnulib/lib/stat-w32.h           |    37 +
 gnulib/lib/stat.c               |   433 +
 gnulib/lib/stdalign.in.h        |   121 +
 gnulib/lib/stdbool.in.h         |   132 +
 gnulib/lib/stddef.in.h          |   121 +
 gnulib/lib/stdint.in.h          |   746 +
 gnulib/lib/stdio-impl.h         |   212 +
 gnulib/lib/stdio-read.c         |   164 +
 gnulib/lib/stdio-write.c        |   202 +
 gnulib/lib/stdio.in.h           |  1444 +
 gnulib/lib/stdlib.in.h          |  1112 +
 gnulib/lib/strchrnul.c          |   142 +
 gnulib/lib/strchrnul.valgrind   |    28 +
 gnulib/lib/strdup.c             |    54 +
 gnulib/lib/streq.h              |   176 +
 gnulib/lib/string.in.h          |  1067 +
 gnulib/lib/strtok_r.c           |    76 +
 gnulib/lib/sys_ioctl.in.h       |    79 +
 gnulib/lib/sys_select.in.h      |   319 +
 gnulib/lib/sys_socket.c         |     4 +
 gnulib/lib/sys_socket.in.h      |   721 +
 gnulib/lib/sys_stat.in.h        |   823 +
 gnulib/lib/sys_time.in.h        |   224 +
 gnulib/lib/sys_types.in.h       |   106 +
 gnulib/lib/sys_uio.in.h         |    63 +
 gnulib/lib/sys_utsname.in.h     |   108 +
 gnulib/lib/sys_wait.in.h        |   131 +
 gnulib/lib/termios.in.h         |    73 +
 gnulib/lib/time.in.h            |   364 +
 gnulib/lib/time_r.c             |    44 +
 gnulib/lib/ttyname_r.c          |   114 +
 gnulib/lib/uname.c              |   268 +
 gnulib/lib/unistd.c             |     4 +
 gnulib/lib/unistd.in.h          |  1719 +
 gnulib/lib/unitypes.in.h        |    46 +
 gnulib/lib/uniwidth.in.h        |    72 +
 gnulib/lib/uniwidth/cjk.h       |    37 +
 gnulib/lib/uniwidth/width.c     |   468 +
 gnulib/lib/vasnprintf.c         |  5615 +++
 gnulib/lib/vasnprintf.h         |    79 +
 gnulib/lib/verify.h             |   301 +
 gnulib/lib/w32sock.h            |   140 +
 gnulib/lib/waitpid.c            |    30 +
 gnulib/lib/warn-on-use.h        |   131 +
 gnulib/lib/wchar.in.h           |  1144 +
 gnulib/lib/wctype-h.c           |     4 +
 gnulib/lib/wctype.in.h          |   679 +
 gnulib/lib/wcwidth.c            |    73 +
 gnulib/lib/xalloc-oversized.h   |    60 +
 gnulib/lib/xsize.c              |     3 +
 gnulib/lib/xsize.h              |   117 +
 include/libvirt/Makefile.in     |  1908 +
 m4/00gnulib.m4                  |    46 +
 m4/absolute-header.m4           |   102 +
 m4/alloca.m4                    |   128 +
 m4/arpa_inet_h.m4               |    59 +
 m4/asm-underscore.m4            |    72 +
 m4/chown.m4                     |   216 +
 m4/close.m4                     |    35 +
 m4/codeset.m4                   |    24 +
 m4/configmake.m4                |    27 +
 m4/dup2.m4                      |   117 +
 m4/eealloc.m4                   |    31 +
 m4/environ.m4                   |    45 +
 m4/errno_h.m4                   |   133 +
 m4/exponentd.m4                 |   116 +
 m4/extensions.m4                |   189 +
 m4/extern-inline.m4             |   114 +
 m4/fcntl-o.m4                   |   139 +
 m4/fcntl.m4                     |   126 +
 m4/fcntl_h.m4                   |    52 +
 m4/float_h.m4                   |   108 +
 m4/fseek.m4                     |    15 +
 m4/fseeko.m4                    |    77 +
 m4/fstat.m4                     |    39 +
 m4/getaddrinfo.m4               |   239 +
 m4/getdelim.m4                  |    98 +
 m4/getdtablesize.m4             |    60 +
 m4/getgroups.m4                 |   109 +
 m4/gethostname.m4               |   107 +
 m4/getline.m4                   |   109 +
 m4/getpass.m4                   |   106 +
 m4/getugroups.m4                |    11 +
 m4/gnulib-cache.m4              |   164 +
 m4/gnulib-common.m4             |   459 +
 m4/gnulib-comp.m4               |  1079 +
 m4/gnulib-tool.m4               |    57 +
 m4/hostent.m4                   |    49 +
 m4/include_next.m4              |   224 +
 m4/inet_ntop.m4                 |    70 +
 m4/intmax_t.m4                  |    59 +
 m4/inttypes_h.m4                |    29 +
 m4/ioctl.m4                     |    44 +
 m4/largefile.m4                 |   177 +
 m4/libtool.m4                   |  8372 +++++
 m4/libunistring-base.m4         |   141 +
 m4/limits-h.m4                  |    43 +
 m4/localcharset.m4              |    11 +
 m4/locale_h.m4                  |   158 +
 m4/localeconv.m4                |    22 +
 m4/lseek.m4                     |    71 +
 m4/ltoptions.m4                 |   437 +
 m4/ltsugar.m4                   |   124 +
 m4/ltversion.m4                 |    23 +
 m4/lt~obsolete.m4               |    99 +
 m4/malloc.m4                    |   104 +
 m4/malloca.m4                   |    14 +
 m4/manywarnings-c++.m4          |   245 +
 m4/manywarnings.m4              |   339 +
 m4/math_h.m4                    |   369 +
 m4/memchr.m4                    |   112 +
 m4/mgetgroups.m4                |    10 +
 m4/mmap-anon.m4                 |    55 +
 m4/mode_t.m4                    |    26 +
 m4/msvc-inval.m4                |    19 +
 m4/msvc-nothrow.m4              |    10 +
 m4/multiarch.m4                 |    62 +
 m4/net_if_h.m4                  |    32 +
 m4/netdb_h.m4                   |    44 +
 m4/netinet_in_h.m4              |    31 +
 m4/nonblocking.m4               |    29 +
 m4/off_t.m4                     |    18 +
 m4/open-cloexec.m4              |    21 +
 m4/open-slash.m4                |    59 +
 m4/open.m4                      |    56 +
 m4/passfd.m4                    |    23 +
 m4/pathmax.m4                   |    42 +
 m4/physmem.m4                   |    46 +
 m4/pipe.m4                      |    15 +
 m4/pipe2.m4                     |    18 +
 m4/poll.m4                      |   107 +
 m4/poll_h.m4                    |    49 +
 m4/posix-shell.m4               |    63 +
 m4/posix_openpt.m4              |    19 +
 m4/printf.m4                    |  1692 +
 m4/pthread_h.m4                 |   268 +
 m4/pthread_sigmask.m4           |   273 +
 m4/pty.m4                       |   160 +
 m4/pty_h.m4                     |    73 +
 m4/raise.m4                     |    36 +
 m4/rawmemchr.m4                 |    20 +
 m4/realloc.m4                   |    82 +
 m4/sched_h.m4                   |    91 +
 m4/select.m4                    |   116 +
 m4/servent.m4                   |    51 +
 m4/sigaction.m4                 |    40 +
 m4/signal_h.m4                  |    83 +
 m4/signalblocking.m4            |    25 +
 m4/sigpipe.m4                   |    29 +
 m4/size_max.m4                  |    75 +
 m4/snprintf.m4                  |    62 +
 m4/socketlib.m4                 |    90 +
 m4/sockets.m4                   |    17 +
 m4/socklen.m4                   |    76 +
 m4/sockpfaf.m4                  |    84 +
 m4/ssize_t.m4                   |    23 +
 m4/stat-time.m4                 |    83 +
 m4/stat.m4                      |    74 +
 m4/stdalign.m4                  |    57 +
 m4/stdbool.m4                   |   122 +
 m4/stddef_h.m4                  |    72 +
 m4/stdint.m4                    |   535 +
 m4/stdint_h.m4                  |    27 +
 m4/stdio_h.m4                   |   225 +
 m4/stdlib_h.m4                  |   136 +
 m4/strchrnul.m4                 |    50 +
 m4/strdup.m4                    |    36 +
 m4/string_h.m4                  |   122 +
 m4/strtok_r.m4                  |    73 +
 m4/sys_ioctl_h.m4               |    64 +
 m4/sys_select_h.m4              |    95 +
 m4/sys_socket_h.m4              |   188 +
 m4/sys_stat_h.m4                |   100 +
 m4/sys_time_h.m4                |   110 +
 m4/sys_types_h.m4               |    60 +
 m4/sys_uio_h.m4                 |    31 +
 m4/sys_utsname_h.m4             |    54 +
 m4/sys_wait_h.m4                |    36 +
 m4/termios_h.m4                 |    43 +
 m4/threadlib.m4                 |   586 +
 m4/time_h.m4                    |   144 +
 m4/time_r.m4                    |    99 +
 m4/ttyname_r.m4                 |   133 +
 m4/uname.m4                     |    19 +
 m4/unistd_h.m4                  |   201 +
 m4/vasnprintf.m4                |   288 +
 m4/waitpid.m4                   |    14 +
 m4/warn-on-use.m4               |    51 +
 m4/warnings.m4                  |   115 +
 m4/wchar_h.m4                   |   241 +
 m4/wchar_t.m4                   |    24 +
 m4/wctype_h.m4                  |   216 +
 m4/wcwidth.m4                   |   131 +
 m4/wint_t.m4                    |    74 +
 m4/xsize.m4                     |    12 +
 po/Makefile.in                  |  1880 +
 src/Makefile.in                 | 15853 +++++++++
 tests/Makefile.in               |  7562 ++++
 tools/Makefile.in               |  3727 ++
 333 files changed, 187734 insertions(+), 32 deletions(-)
 create mode 100644 .git-module-status
 create mode 100644 INSTALL
 create mode 100644 Makefile.in
 create mode 100644 aclocal.m4
 create mode 100755 build-aux/compile
 create mode 100755 build-aux/config.guess
 create mode 100755 build-aux/config.sub
 create mode 100755 build-aux/depcomp
 create mode 100755 build-aux/install-sh
 create mode 100644 build-aux/ltmain.sh
 create mode 100755 build-aux/missing
 create mode 100755 build-aux/test-driver
 create mode 100644 config.h.in
 create mode 100755 configure
 create mode 100644 docs/Makefile.in
 create mode 100644 examples/Makefile.in
 create mode 100644 gnulib/lib/Makefile.in
 create mode 100644 gnulib/lib/_Noreturn.h
 create mode 100644 gnulib/lib/accept.c
 create mode 100644 gnulib/lib/alloca.c
 create mode 100644 gnulib/lib/alloca.in.h
 create mode 100644 gnulib/lib/arg-nonnull.h
 create mode 100644 gnulib/lib/arpa_inet.in.h
 create mode 100644 gnulib/lib/asnprintf.c
 create mode 100644 gnulib/lib/assure.h
 create mode 100644 gnulib/lib/binary-io.c
 create mode 100644 gnulib/lib/binary-io.h
 create mode 100644 gnulib/lib/bind.c
 create mode 100644 gnulib/lib/c++defs.h
 create mode 100644 gnulib/lib/chown.c
 create mode 100644 gnulib/lib/cloexec.c
 create mode 100644 gnulib/lib/cloexec.h
 create mode 100644 gnulib/lib/close.c
 create mode 100644 gnulib/lib/connect.c
 create mode 100644 gnulib/lib/dup2.c
 create mode 100644 gnulib/lib/errno.in.h
 create mode 100644 gnulib/lib/fchown-stub.c
 create mode 100644 gnulib/lib/fcntl.c
 create mode 100644 gnulib/lib/fcntl.in.h
 create mode 100644 gnulib/lib/fd-hook.c
 create mode 100644 gnulib/lib/fd-hook.h
 create mode 100644 gnulib/lib/filename.h
 create mode 100644 gnulib/lib/float+.h
 create mode 100644 gnulib/lib/float.c
 create mode 100644 gnulib/lib/float.in.h
 create mode 100644 gnulib/lib/fseek.c
 create mode 100644 gnulib/lib/fseeko.c
 create mode 100644 gnulib/lib/fstat.c
 create mode 100644 gnulib/lib/gai_strerror.c
 create mode 100644 gnulib/lib/getaddrinfo.c
 create mode 100644 gnulib/lib/getdelim.c
 create mode 100644 gnulib/lib/getdtablesize.c
 create mode 100644 gnulib/lib/getgroups.c
 create mode 100644 gnulib/lib/gethostname.c
 create mode 100644 gnulib/lib/getline.c
 create mode 100644 gnulib/lib/getpass.c
 create mode 100644 gnulib/lib/getpass.h
 create mode 100644 gnulib/lib/getpeername.c
 create mode 100644 gnulib/lib/getsockname.c
 create mode 100644 gnulib/lib/gettext.h
 create mode 100644 gnulib/lib/getugroups.c
 create mode 100644 gnulib/lib/getugroups.h
 create mode 100644 gnulib/lib/glthread/threadlib.c
 create mode 100644 gnulib/lib/gnulib.mk
 create mode 100644 gnulib/lib/inet_ntop.c
 create mode 100644 gnulib/lib/intprops.h
 create mode 100644 gnulib/lib/ioctl.c
 create mode 100644 gnulib/lib/itold.c
 create mode 100644 gnulib/lib/limits.in.h
 create mode 100644 gnulib/lib/listen.c
 create mode 100644 gnulib/lib/localcharset.c
 create mode 100644 gnulib/lib/localcharset.h
 create mode 100644 gnulib/lib/locale.in.h
 create mode 100644 gnulib/lib/localeconv.c
 create mode 100644 gnulib/lib/lseek.c
 create mode 100644 gnulib/lib/malloc.c
 create mode 100644 gnulib/lib/malloca.c
 create mode 100644 gnulib/lib/malloca.h
 create mode 100644 gnulib/lib/memchr.c
 create mode 100644 gnulib/lib/memchr.valgrind
 create mode 100644 gnulib/lib/mgetgroups.c
 create mode 100644 gnulib/lib/mgetgroups.h
 create mode 100644 gnulib/lib/msvc-inval.c
 create mode 100644 gnulib/lib/msvc-inval.h
 create mode 100644 gnulib/lib/msvc-nothrow.c
 create mode 100644 gnulib/lib/msvc-nothrow.h
 create mode 100644 gnulib/lib/net_if.in.h
 create mode 100644 gnulib/lib/netdb.in.h
 create mode 100644 gnulib/lib/netinet_in.in.h
 create mode 100644 gnulib/lib/nonblocking.c
 create mode 100644 gnulib/lib/nonblocking.h
 create mode 100644 gnulib/lib/open.c
 create mode 100644 gnulib/lib/openpty.c
 create mode 100644 gnulib/lib/passfd.c
 create mode 100644 gnulib/lib/passfd.h
 create mode 100644 gnulib/lib/pathmax.h
 create mode 100644 gnulib/lib/physmem.c
 create mode 100644 gnulib/lib/physmem.h
 create mode 100644 gnulib/lib/pipe.c
 create mode 100644 gnulib/lib/pipe2.c
 create mode 100644 gnulib/lib/poll.c
 create mode 100644 gnulib/lib/poll.in.h
 create mode 100644 gnulib/lib/posix_openpt.c
 create mode 100644 gnulib/lib/printf-args.c
 create mode 100644 gnulib/lib/printf-args.h
 create mode 100644 gnulib/lib/printf-parse.c
 create mode 100644 gnulib/lib/printf-parse.h
 create mode 100644 gnulib/lib/pthread.in.h
 create mode 100644 gnulib/lib/pthread_sigmask.c
 create mode 100644 gnulib/lib/pty.in.h
 create mode 100644 gnulib/lib/raise.c
 create mode 100644 gnulib/lib/rawmemchr.c
 create mode 100644 gnulib/lib/rawmemchr.valgrind
 create mode 100644 gnulib/lib/realloc.c
 create mode 100644 gnulib/lib/recv.c
 create mode 100644 gnulib/lib/sched.in.h
 create mode 100644 gnulib/lib/select.c
 create mode 100644 gnulib/lib/send.c
 create mode 100644 gnulib/lib/setsockopt.c
 create mode 100644 gnulib/lib/sig-handler.c
 create mode 100644 gnulib/lib/sig-handler.h
 create mode 100644 gnulib/lib/sigaction.c
 create mode 100644 gnulib/lib/signal.in.h
 create mode 100644 gnulib/lib/sigprocmask.c
 create mode 100644 gnulib/lib/size_max.h
 create mode 100644 gnulib/lib/snprintf.c
 create mode 100644 gnulib/lib/socket.c
 create mode 100644 gnulib/lib/sockets.c
 create mode 100644 gnulib/lib/sockets.h
 create mode 100644 gnulib/lib/stat-time.c
 create mode 100644 gnulib/lib/stat-time.h
 create mode 100644 gnulib/lib/stat-w32.c
 create mode 100644 gnulib/lib/stat-w32.h
 create mode 100644 gnulib/lib/stat.c
 create mode 100644 gnulib/lib/stdalign.in.h
 create mode 100644 gnulib/lib/stdbool.in.h
 create mode 100644 gnulib/lib/stddef.in.h
 create mode 100644 gnulib/lib/stdint.in.h
 create mode 100644 gnulib/lib/stdio-impl.h
 create mode 100644 gnulib/lib/stdio-read.c
 create mode 100644 gnulib/lib/stdio-write.c
 create mode 100644 gnulib/lib/stdio.in.h
 create mode 100644 gnulib/lib/stdlib.in.h
 create mode 100644 gnulib/lib/strchrnul.c
 create mode 100644 gnulib/lib/strchrnul.valgrind
 create mode 100644 gnulib/lib/strdup.c
 create mode 100644 gnulib/lib/streq.h
 create mode 100644 gnulib/lib/string.in.h
 create mode 100644 gnulib/lib/strtok_r.c
 create mode 100644 gnulib/lib/sys_ioctl.in.h
 create mode 100644 gnulib/lib/sys_select.in.h
 create mode 100644 gnulib/lib/sys_socket.c
 create mode 100644 gnulib/lib/sys_socket.in.h
 create mode 100644 gnulib/lib/sys_stat.in.h
 create mode 100644 gnulib/lib/sys_time.in.h
 create mode 100644 gnulib/lib/sys_types.in.h
 create mode 100644 gnulib/lib/sys_uio.in.h
 create mode 100644 gnulib/lib/sys_utsname.in.h
 create mode 100644 gnulib/lib/sys_wait.in.h
 create mode 100644 gnulib/lib/termios.in.h
 create mode 100644 gnulib/lib/time.in.h
 create mode 100644 gnulib/lib/time_r.c
 create mode 100644 gnulib/lib/ttyname_r.c
 create mode 100644 gnulib/lib/uname.c
 create mode 100644 gnulib/lib/unistd.c
 create mode 100644 gnulib/lib/unistd.in.h
 create mode 100644 gnulib/lib/unitypes.in.h
 create mode 100644 gnulib/lib/uniwidth.in.h
 create mode 100644 gnulib/lib/uniwidth/cjk.h
 create mode 100644 gnulib/lib/uniwidth/width.c
 create mode 100644 gnulib/lib/vasnprintf.c
 create mode 100644 gnulib/lib/vasnprintf.h
 create mode 100644 gnulib/lib/verify.h
 create mode 100644 gnulib/lib/w32sock.h
 create mode 100644 gnulib/lib/waitpid.c
 create mode 100644 gnulib/lib/warn-on-use.h
 create mode 100644 gnulib/lib/wchar.in.h
 create mode 100644 gnulib/lib/wctype-h.c
 create mode 100644 gnulib/lib/wctype.in.h
 create mode 100644 gnulib/lib/wcwidth.c
 create mode 100644 gnulib/lib/xalloc-oversized.h
 create mode 100644 gnulib/lib/xsize.c
 create mode 100644 gnulib/lib/xsize.h
 create mode 100644 include/libvirt/Makefile.in
 create mode 100644 m4/00gnulib.m4
 create mode 100644 m4/absolute-header.m4
 create mode 100644 m4/alloca.m4
 create mode 100644 m4/arpa_inet_h.m4
 create mode 100644 m4/asm-underscore.m4
 create mode 100644 m4/chown.m4
 create mode 100644 m4/close.m4
 create mode 100644 m4/codeset.m4
 create mode 100644 m4/configmake.m4
 create mode 100644 m4/dup2.m4
 create mode 100644 m4/eealloc.m4
 create mode 100644 m4/environ.m4
 create mode 100644 m4/errno_h.m4
 create mode 100644 m4/exponentd.m4
 create mode 100644 m4/extensions.m4
 create mode 100644 m4/extern-inline.m4
 create mode 100644 m4/fcntl-o.m4
 create mode 100644 m4/fcntl.m4
 create mode 100644 m4/fcntl_h.m4
 create mode 100644 m4/float_h.m4
 create mode 100644 m4/fseek.m4
 create mode 100644 m4/fseeko.m4
 create mode 100644 m4/fstat.m4
 create mode 100644 m4/getaddrinfo.m4
 create mode 100644 m4/getdelim.m4
 create mode 100644 m4/getdtablesize.m4
 create mode 100644 m4/getgroups.m4
 create mode 100644 m4/gethostname.m4
 create mode 100644 m4/getline.m4
 create mode 100644 m4/getpass.m4
 create mode 100644 m4/getugroups.m4
 create mode 100644 m4/gnulib-cache.m4
 create mode 100644 m4/gnulib-common.m4
 create mode 100644 m4/gnulib-comp.m4
 create mode 100644 m4/gnulib-tool.m4
 create mode 100644 m4/hostent.m4
 create mode 100644 m4/include_next.m4
 create mode 100644 m4/inet_ntop.m4
 create mode 100644 m4/intmax_t.m4
 create mode 100644 m4/inttypes_h.m4
 create mode 100644 m4/ioctl.m4
 create mode 100644 m4/largefile.m4
 create mode 100644 m4/libtool.m4
 create mode 100644 m4/libunistring-base.m4
 create mode 100644 m4/limits-h.m4
 create mode 100644 m4/localcharset.m4
 create mode 100644 m4/locale_h.m4
 create mode 100644 m4/localeconv.m4
 create mode 100644 m4/lseek.m4
 create mode 100644 m4/ltoptions.m4
 create mode 100644 m4/ltsugar.m4
 create mode 100644 m4/ltversion.m4
 create mode 100644 m4/lt~obsolete.m4
 create mode 100644 m4/malloc.m4
 create mode 100644 m4/malloca.m4
 create mode 100644 m4/manywarnings-c++.m4
 create mode 100644 m4/manywarnings.m4
 create mode 100644 m4/math_h.m4
 create mode 100644 m4/memchr.m4
 create mode 100644 m4/mgetgroups.m4
 create mode 100644 m4/mmap-anon.m4
 create mode 100644 m4/mode_t.m4
 create mode 100644 m4/msvc-inval.m4
 create mode 100644 m4/msvc-nothrow.m4
 create mode 100644 m4/multiarch.m4
 create mode 100644 m4/net_if_h.m4
 create mode 100644 m4/netdb_h.m4
 create mode 100644 m4/netinet_in_h.m4
 create mode 100644 m4/nonblocking.m4
 create mode 100644 m4/off_t.m4
 create mode 100644 m4/open-cloexec.m4
 create mode 100644 m4/open-slash.m4
 create mode 100644 m4/open.m4
 create mode 100644 m4/passfd.m4
 create mode 100644 m4/pathmax.m4
 create mode 100644 m4/physmem.m4
 create mode 100644 m4/pipe.m4
 create mode 100644 m4/pipe2.m4
 create mode 100644 m4/poll.m4
 create mode 100644 m4/poll_h.m4
 create mode 100644 m4/posix-shell.m4
 create mode 100644 m4/posix_openpt.m4
 create mode 100644 m4/printf.m4
 create mode 100644 m4/pthread_h.m4
 create mode 100644 m4/pthread_sigmask.m4
 create mode 100644 m4/pty.m4
 create mode 100644 m4/pty_h.m4
 create mode 100644 m4/raise.m4
 create mode 100644 m4/rawmemchr.m4
 create mode 100644 m4/realloc.m4
 create mode 100644 m4/sched_h.m4
 create mode 100644 m4/select.m4
 create mode 100644 m4/servent.m4
 create mode 100644 m4/sigaction.m4
 create mode 100644 m4/signal_h.m4
 create mode 100644 m4/signalblocking.m4
 create mode 100644 m4/sigpipe.m4
 create mode 100644 m4/size_max.m4
 create mode 100644 m4/snprintf.m4
 create mode 100644 m4/socketlib.m4
 create mode 100644 m4/sockets.m4
 create mode 100644 m4/socklen.m4
 create mode 100644 m4/sockpfaf.m4
 create mode 100644 m4/ssize_t.m4
 create mode 100644 m4/stat-time.m4
 create mode 100644 m4/stat.m4
 create mode 100644 m4/stdalign.m4
 create mode 100644 m4/stdbool.m4
 create mode 100644 m4/stddef_h.m4
 create mode 100644 m4/stdint.m4
 create mode 100644 m4/stdint_h.m4
 create mode 100644 m4/stdio_h.m4
 create mode 100644 m4/stdlib_h.m4
 create mode 100644 m4/strchrnul.m4
 create mode 100644 m4/strdup.m4
 create mode 100644 m4/string_h.m4
 create mode 100644 m4/strtok_r.m4
 create mode 100644 m4/sys_ioctl_h.m4
 create mode 100644 m4/sys_select_h.m4
 create mode 100644 m4/sys_socket_h.m4
 create mode 100644 m4/sys_stat_h.m4
 create mode 100644 m4/sys_time_h.m4
 create mode 100644 m4/sys_types_h.m4
 create mode 100644 m4/sys_uio_h.m4
 create mode 100644 m4/sys_utsname_h.m4
 create mode 100644 m4/sys_wait_h.m4
 create mode 100644 m4/termios_h.m4
 create mode 100644 m4/threadlib.m4
 create mode 100644 m4/time_h.m4
 create mode 100644 m4/time_r.m4
 create mode 100644 m4/ttyname_r.m4
 create mode 100644 m4/uname.m4
 create mode 100644 m4/unistd_h.m4
 create mode 100644 m4/vasnprintf.m4
 create mode 100644 m4/waitpid.m4
 create mode 100644 m4/warn-on-use.m4
 create mode 100644 m4/warnings.m4
 create mode 100644 m4/wchar_h.m4
 create mode 100644 m4/wchar_t.m4
 create mode 100644 m4/wctype_h.m4
 create mode 100644 m4/wcwidth.m4
 create mode 100644 m4/wint_t.m4
 create mode 100644 m4/xsize.m4
 create mode 100644 po/Makefile.in
 create mode 100644 src/Makefile.in
 create mode 100644 tests/Makefile.in
 create mode 100644 tools/Makefile.in

diff --git a/.git-module-status b/.git-module-status
new file mode 100644
index 0000000000..05eae84f95
--- /dev/null
+++ b/.git-module-status
@@ -0,0 +1,2 @@
+7d069378921bfa0d7c7198ea177aac0a2440016f
+99207b9b8ae25c3b9d37627321c2242e5765bd44
diff --git a/.gitignore b/.gitignore
index 949bd3bc5a..c6a26da997 100644
--- a/.gitignore
+++ b/.gitignore
@@ -8,36 +8,17 @@
 .#*
 
 # autotools related ignores
-!/m4/virt-*.m4
 *.cov
 /AUTHORS
-/INSTALL
-/aclocal.m4
 /autom4te.cache
-/build-aux/compile
-/build-aux/config.guess
-/build-aux/config.sub
-/build-aux/depcomp
-/build-aux/install-sh
-/build-aux/ltmain.sh
-/build-aux/missing
-/build-aux/test-driver
-/config.h.in
 /config.log
-/configure
-/m4/*
-Makefile.in
 
 # gnulib related ignores
-!/gnulib/lib/Makefile.am
 *.rej
 *~
-/gnulib/lib/*
-/gnulib/m4/*
 
 # git related ignores
 *.orig
-.git-module-status
 
 # libvirt related ignores
 /build/
diff --git a/INSTALL b/INSTALL
new file mode 100644
index 0000000000..8865734f81
--- /dev/null
+++ b/INSTALL
@@ -0,0 +1,368 @@
+Installation Instructions
+*************************
+
+   Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software
+Foundation, Inc.
+
+   Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+   Briefly, the shell command './configure && make && make install'
+should configure, build, and install this package.  The following
+more-detailed instructions are generic; see the 'README' file for
+instructions specific to this package.  Some packages provide this
+'INSTALL' file but do not implement all of the features documented
+below.  The lack of an optional feature in a given package is not
+necessarily a bug.  More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+   The 'configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a 'Makefile' in each directory of the package.
+It may also create one or more '.h' files containing system-dependent
+definitions.  Finally, it creates a shell script 'config.status' that
+you can run in the future to recreate the current configuration, and a
+file 'config.log' containing compiler output (useful mainly for
+debugging 'configure').
+
+   It can also use an optional file (typically called 'config.cache' and
+enabled with '--cache-file=config.cache' or simply '-C') that saves the
+results of its tests to speed up reconfiguring.  Caching is disabled by
+default to prevent problems with accidental use of stale cache files.
+
+   If you need to do unusual things to compile the package, please try
+to figure out how 'configure' could check whether to do them, and mail
+diffs or instructions to the address given in the 'README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point 'config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file 'configure.ac' (or 'configure.in') is used to create
+'configure' by a program called 'autoconf'.  You need 'configure.ac' if
+you want to change it or regenerate 'configure' using a newer version of
+'autoconf'.
+
+   The simplest way to compile this package is:
+
+  1. 'cd' to the directory containing the package's source code and type
+     './configure' to configure the package for your system.
+
+     Running 'configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
+
+  2. Type 'make' to compile the package.
+
+  3. Optionally, type 'make check' to run any self-tests that come with
+     the package, generally using the just-built uninstalled binaries.
+
+  4. Type 'make install' to install the programs and any data files and
+     documentation.  When installing into a prefix owned by root, it is
+     recommended that the package be configured and built as a regular
+     user, and only the 'make install' phase executed with root
+     privileges.
+
+  5. Optionally, type 'make installcheck' to repeat any self-tests, but
+     this time using the binaries in their final installed location.
+     This target does not install anything.  Running this target as a
+     regular user, particularly if the prior 'make install' required
+     root privileges, verifies that the installation completed
+     correctly.
+
+  6. You can remove the program binaries and object files from the
+     source code directory by typing 'make clean'.  To also remove the
+     files that 'configure' created (so you can compile the package for
+     a different kind of computer), type 'make distclean'.  There is
+     also a 'make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+  7. Often, you can also type 'make uninstall' to remove the installed
+     files again.  In practice, not all packages have tested that
+     uninstallation works correctly, even though it is required by the
+     GNU Coding Standards.
+
+  8. Some packages, particularly those that use Automake, provide 'make
+     distcheck', which can by used by developers to test that all other
+     targets like 'make install' and 'make uninstall' work correctly.
+     This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the 'configure' script does not know about.  Run './configure --help'
+for details on some of the pertinent environment variables.
+
+   You can give 'configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here is
+an example:
+
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you can use GNU 'make'.  'cd' to the
+directory where you want the object files and executables to go and run
+the 'configure' script.  'configure' automatically checks for the source
+code in the directory that 'configure' is in and in '..'.  This is known
+as a "VPATH" build.
+
+   With a non-GNU 'make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use 'make distclean' before
+reconfiguring for another architecture.
+
+   On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple '-arch' options to the
+compiler but only a single '-arch' option to the preprocessor.  Like
+this:
+
+     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CPP="gcc -E" CXXCPP="g++ -E"
+
+   This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the 'lipo' tool if you have problems.
+
+Installation Names
+==================
+
+   By default, 'make install' installs the package's commands under
+'/usr/local/bin', include files under '/usr/local/include', etc.  You
+can specify an installation prefix other than '/usr/local' by giving
+'configure' the option '--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option '--exec-prefix=PREFIX' to 'configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like '--bindir=DIR' to specify different values for particular
+kinds of files.  Run 'configure --help' for a list of the directories
+you can set and what kinds of files go in them.  In general, the default
+for these options is expressed in terms of '${prefix}', so that
+specifying just '--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+   The most portable way to affect installation locations is to pass the
+correct locations to 'configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+'make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+   The first method involves providing an override variable for each
+affected directory.  For example, 'make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+'${prefix}'.  Any directories that were specified during 'configure',
+but not in terms of '${prefix}', must each be overridden at install time
+for the entire installation to be relocated.  The approach of makefile
+variable overrides for each directory variable is required by the GNU
+Coding Standards, and ideally causes no recompilation.  However, some
+platforms have known limitations with the semantics of shared libraries
+that end up requiring recompilation when using this method, particularly
+noticeable in packages that use GNU Libtool.
+
+   The second method involves providing the 'DESTDIR' variable.  For
+example, 'make install DESTDIR=/alternate/directory' will prepend
+'/alternate/directory' before all installation names.  The approach of
+'DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters.  On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of '${prefix}'
+at 'configure' time.
+
+Optional Features
+=================
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving 'configure' the
+option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'.
+
+   Some packages pay attention to '--enable-FEATURE' options to
+'configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to '--with-PACKAGE' options, where PACKAGE
+is something like 'gnu-as' or 'x' (for the X Window System).  The
+'README' should mention any '--enable-' and '--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, 'configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the 'configure' options '--x-includes=DIR' and
+'--x-libraries=DIR' to specify their locations.
+
+   Some packages offer the ability to configure how verbose the
+execution of 'make' will be.  For these packages, running './configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with 'make V=1'; while running './configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with 'make V=0'.
+
+Particular systems
+==================
+
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU CC
+is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+   HP-UX 'make' updates targets which have the same time stamps as their
+prerequisites, which makes it generally unusable when shipped generated
+files such as 'configure' are involved.  Use GNU 'make' instead.
+
+   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its '<wchar.h>' header file.  The option '-nodtk' can be used as a
+workaround.  If GNU CC is not installed, it is therefore recommended to
+try
+
+     ./configure CC="cc"
+
+and if that doesn't work, try
+
+     ./configure CC="cc -nodtk"
+
+   On Solaris, don't put '/usr/ucb' early in your 'PATH'.  This
+directory contains several dysfunctional programs; working variants of
+these programs are available in '/usr/bin'.  So, if you need '/usr/ucb'
+in your 'PATH', put it _after_ '/usr/bin'.
+
+   On Haiku, software installed for all users goes in '/boot/common',
+not '/usr/local'.  It is recommended to use the following options:
+
+     ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+   There may be some features 'configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, 'configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+'--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as 'sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS
+     KERNEL-OS
+
+   See the file 'config.sub' for the possible values of each field.  If
+'config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option '--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with '--host=TYPE'.
+
+Sharing Defaults
+================
+
+   If you want to set default values for 'configure' scripts to share,
+you can create a site shell script called 'config.site' that gives
+default values for variables like 'CC', 'cache_file', and 'prefix'.
+'configure' looks for 'PREFIX/share/config.site' if it exists, then
+'PREFIX/etc/config.site' if it exists.  Or, you can set the
+'CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all 'configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+   Variables not defined in a site shell script can be set in the
+environment passed to 'configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the 'configure' command line, using 'VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified 'gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an
+Autoconf limitation.  Until the limitation is lifted, you can use this
+workaround:
+
+     CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+'configure' Invocation
+======================
+
+   'configure' recognizes the following options to control how it
+operates.
+
+'--help'
+'-h'
+     Print a summary of all of the options to 'configure', and exit.
+
+'--help=short'
+'--help=recursive'
+     Print a summary of the options unique to this package's
+     'configure', and exit.  The 'short' variant lists options used only
+     in the top level, while the 'recursive' variant lists options also
+     present in any nested packages.
+
+'--version'
+'-V'
+     Print the version of Autoconf used to generate the 'configure'
+     script, and exit.
+
+'--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally 'config.cache'.  FILE defaults to '/dev/null' to
+     disable caching.
+
+'--config-cache'
+'-C'
+     Alias for '--cache-file=config.cache'.
+
+'--quiet'
+'--silent'
+'-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to '/dev/null' (any error
+     messages will still be shown).
+
+'--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     'configure' can determine that directory automatically.
+
+'--prefix=DIR'
+     Use DIR as the installation prefix.  *note Installation Names:: for
+     more details, including other options available for fine-tuning the
+     installation locations.
+
+'--no-create'
+'-n'
+     Run the configure checks, but stop before creating any output
+     files.
+
+'configure' also accepts some other, not widely useful, options.  Run
+'configure --help' for more details.
diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000000..a855814aa7
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,2323 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \
+	$(top_srcdir)/m4/absolute-header.m4 $(top_srcdir)/m4/alloca.m4 \
+	$(top_srcdir)/m4/arpa_inet_h.m4 \
+	$(top_srcdir)/m4/asm-underscore.m4 $(top_srcdir)/m4/chown.m4 \
+	$(top_srcdir)/m4/close.m4 $(top_srcdir)/m4/codeset.m4 \
+	$(top_srcdir)/m4/configmake.m4 $(top_srcdir)/m4/dup2.m4 \
+	$(top_srcdir)/m4/eealloc.m4 $(top_srcdir)/m4/environ.m4 \
+	$(top_srcdir)/m4/errno_h.m4 $(top_srcdir)/m4/exponentd.m4 \
+	$(top_srcdir)/m4/extensions.m4 \
+	$(top_srcdir)/m4/extern-inline.m4 $(top_srcdir)/m4/fcntl-o.m4 \
+	$(top_srcdir)/m4/fcntl.m4 $(top_srcdir)/m4/fcntl_h.m4 \
+	$(top_srcdir)/m4/float_h.m4 $(top_srcdir)/m4/fseek.m4 \
+	$(top_srcdir)/m4/fseeko.m4 $(top_srcdir)/m4/fstat.m4 \
+	$(top_srcdir)/m4/getaddrinfo.m4 $(top_srcdir)/m4/getdelim.m4 \
+	$(top_srcdir)/m4/getdtablesize.m4 \
+	$(top_srcdir)/m4/getgroups.m4 $(top_srcdir)/m4/gethostname.m4 \
+	$(top_srcdir)/m4/getline.m4 $(top_srcdir)/m4/getpass.m4 \
+	$(top_srcdir)/m4/getugroups.m4 \
+	$(top_srcdir)/m4/gnulib-common.m4 \
+	$(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/hostent.m4 \
+	$(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/inet_ntop.m4 \
+	$(top_srcdir)/m4/intmax_t.m4 $(top_srcdir)/m4/inttypes_h.m4 \
+	$(top_srcdir)/m4/ioctl.m4 $(top_srcdir)/m4/largefile.m4 \
+	$(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/libunistring-base.m4 \
+	$(top_srcdir)/m4/limits-h.m4 $(top_srcdir)/m4/localcharset.m4 \
+	$(top_srcdir)/m4/locale_h.m4 $(top_srcdir)/m4/localeconv.m4 \
+	$(top_srcdir)/m4/lseek.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/malloc.m4 \
+	$(top_srcdir)/m4/malloca.m4 $(top_srcdir)/m4/manywarnings.m4 \
+	$(top_srcdir)/m4/memchr.m4 $(top_srcdir)/m4/mgetgroups.m4 \
+	$(top_srcdir)/m4/mmap-anon.m4 $(top_srcdir)/m4/mode_t.m4 \
+	$(top_srcdir)/m4/msvc-inval.m4 \
+	$(top_srcdir)/m4/msvc-nothrow.m4 $(top_srcdir)/m4/multiarch.m4 \
+	$(top_srcdir)/m4/net_if_h.m4 $(top_srcdir)/m4/netdb_h.m4 \
+	$(top_srcdir)/m4/netinet_in_h.m4 \
+	$(top_srcdir)/m4/nonblocking.m4 $(top_srcdir)/m4/off_t.m4 \
+	$(top_srcdir)/m4/open-cloexec.m4 \
+	$(top_srcdir)/m4/open-slash.m4 $(top_srcdir)/m4/open.m4 \
+	$(top_srcdir)/m4/passfd.m4 $(top_srcdir)/m4/pathmax.m4 \
+	$(top_srcdir)/m4/physmem.m4 $(top_srcdir)/m4/pipe.m4 \
+	$(top_srcdir)/m4/pipe2.m4 $(top_srcdir)/m4/poll.m4 \
+	$(top_srcdir)/m4/poll_h.m4 $(top_srcdir)/m4/posix-shell.m4 \
+	$(top_srcdir)/m4/posix_openpt.m4 $(top_srcdir)/m4/printf.m4 \
+	$(top_srcdir)/m4/pthread_h.m4 \
+	$(top_srcdir)/m4/pthread_sigmask.m4 $(top_srcdir)/m4/pty.m4 \
+	$(top_srcdir)/m4/pty_h.m4 $(top_srcdir)/m4/raise.m4 \
+	$(top_srcdir)/m4/rawmemchr.m4 $(top_srcdir)/m4/realloc.m4 \
+	$(top_srcdir)/m4/sched_h.m4 $(top_srcdir)/m4/select.m4 \
+	$(top_srcdir)/m4/servent.m4 $(top_srcdir)/m4/sigaction.m4 \
+	$(top_srcdir)/m4/signal_h.m4 \
+	$(top_srcdir)/m4/signalblocking.m4 $(top_srcdir)/m4/sigpipe.m4 \
+	$(top_srcdir)/m4/size_max.m4 $(top_srcdir)/m4/snprintf.m4 \
+	$(top_srcdir)/m4/socketlib.m4 $(top_srcdir)/m4/sockets.m4 \
+	$(top_srcdir)/m4/socklen.m4 $(top_srcdir)/m4/sockpfaf.m4 \
+	$(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stat-time.m4 \
+	$(top_srcdir)/m4/stat.m4 $(top_srcdir)/m4/stdalign.m4 \
+	$(top_srcdir)/m4/stdbool.m4 $(top_srcdir)/m4/stddef_h.m4 \
+	$(top_srcdir)/m4/stdint.m4 $(top_srcdir)/m4/stdint_h.m4 \
+	$(top_srcdir)/m4/stdio_h.m4 $(top_srcdir)/m4/stdlib_h.m4 \
+	$(top_srcdir)/m4/strchrnul.m4 $(top_srcdir)/m4/strdup.m4 \
+	$(top_srcdir)/m4/string_h.m4 $(top_srcdir)/m4/strtok_r.m4 \
+	$(top_srcdir)/m4/sys_ioctl_h.m4 \
+	$(top_srcdir)/m4/sys_select_h.m4 \
+	$(top_srcdir)/m4/sys_socket_h.m4 \
+	$(top_srcdir)/m4/sys_stat_h.m4 $(top_srcdir)/m4/sys_time_h.m4 \
+	$(top_srcdir)/m4/sys_types_h.m4 $(top_srcdir)/m4/sys_uio_h.m4 \
+	$(top_srcdir)/m4/sys_utsname_h.m4 \
+	$(top_srcdir)/m4/sys_wait_h.m4 $(top_srcdir)/m4/termios_h.m4 \
+	$(top_srcdir)/m4/threadlib.m4 $(top_srcdir)/m4/time_h.m4 \
+	$(top_srcdir)/m4/time_r.m4 $(top_srcdir)/m4/ttyname_r.m4 \
+	$(top_srcdir)/m4/uname.m4 $(top_srcdir)/m4/unistd_h.m4 \
+	$(top_srcdir)/m4/vasnprintf.m4 $(top_srcdir)/m4/virt-acl.m4 \
+	$(top_srcdir)/m4/virt-apparmor.m4 $(top_srcdir)/m4/virt-arg.m4 \
+	$(top_srcdir)/m4/virt-atomic.m4 $(top_srcdir)/m4/virt-attr.m4 \
+	$(top_srcdir)/m4/virt-audit.m4 \
+	$(top_srcdir)/m4/virt-bash-completion.m4 \
+	$(top_srcdir)/m4/virt-blkid.m4 $(top_srcdir)/m4/virt-capng.m4 \
+	$(top_srcdir)/m4/virt-chrdev-lock-files.m4 \
+	$(top_srcdir)/m4/virt-compile-pie.m4 \
+	$(top_srcdir)/m4/virt-compile-warnings.m4 \
+	$(top_srcdir)/m4/virt-curl.m4 $(top_srcdir)/m4/virt-dbus.m4 \
+	$(top_srcdir)/m4/virt-debug.m4 \
+	$(top_srcdir)/m4/virt-default-editor.m4 \
+	$(top_srcdir)/m4/virt-devmapper.m4 \
+	$(top_srcdir)/m4/virt-dlopen.m4 \
+	$(top_srcdir)/m4/virt-driver-bhyve.m4 \
+	$(top_srcdir)/m4/virt-driver-esx.m4 \
+	$(top_srcdir)/m4/virt-driver-hyperv.m4 \
+	$(top_srcdir)/m4/virt-driver-interface.m4 \
+	$(top_srcdir)/m4/virt-driver-libvirtd.m4 \
+	$(top_srcdir)/m4/virt-driver-libxl.m4 \
+	$(top_srcdir)/m4/virt-driver-lxc.m4 \
+	$(top_srcdir)/m4/virt-driver-modules.m4 \
+	$(top_srcdir)/m4/virt-driver-network.m4 \
+	$(top_srcdir)/m4/virt-driver-openvz.m4 \
+	$(top_srcdir)/m4/virt-driver-qemu.m4 \
+	$(top_srcdir)/m4/virt-driver-remote.m4 \
+	$(top_srcdir)/m4/virt-driver-test.m4 \
+	$(top_srcdir)/m4/virt-driver-vbox.m4 \
+	$(top_srcdir)/m4/virt-driver-vmware.m4 \
+	$(top_srcdir)/m4/virt-driver-vz.m4 \
+	$(top_srcdir)/m4/virt-dtrace.m4 \
+	$(top_srcdir)/m4/virt-external-programs.m4 \
+	$(top_srcdir)/m4/virt-firewalld-zone.m4 \
+	$(top_srcdir)/m4/virt-firewalld.m4 \
+	$(top_srcdir)/m4/virt-fuse.m4 $(top_srcdir)/m4/virt-glib.m4 \
+	$(top_srcdir)/m4/virt-gluster.m4 \
+	$(top_srcdir)/m4/virt-gnutls.m4 $(top_srcdir)/m4/virt-hal.m4 \
+	$(top_srcdir)/m4/virt-host-validate.m4 \
+	$(top_srcdir)/m4/virt-init-script.m4 \
+	$(top_srcdir)/m4/virt-lib.m4 $(top_srcdir)/m4/virt-libiscsi.m4 \
+	$(top_srcdir)/m4/virt-libnl.m4 \
+	$(top_srcdir)/m4/virt-libpcap.m4 \
+	$(top_srcdir)/m4/virt-libssh.m4 \
+	$(top_srcdir)/m4/virt-libxml.m4 \
+	$(top_srcdir)/m4/virt-linker-no-indirect.m4 \
+	$(top_srcdir)/m4/virt-linker-no-undefined.m4 \
+	$(top_srcdir)/m4/virt-linker-relro.m4 \
+	$(top_srcdir)/m4/virt-loader-nvram.m4 \
+	$(top_srcdir)/m4/virt-login-shell.m4 \
+	$(top_srcdir)/m4/virt-macvtap.m4 \
+	$(top_srcdir)/m4/virt-netcf.m4 $(top_srcdir)/m4/virt-nls.m4 \
+	$(top_srcdir)/m4/virt-nss.m4 $(top_srcdir)/m4/virt-numactl.m4 \
+	$(top_srcdir)/m4/virt-numad.m4 \
+	$(top_srcdir)/m4/virt-nwfilter.m4 \
+	$(top_srcdir)/m4/virt-openwsman.m4 \
+	$(top_srcdir)/m4/virt-parted.m4 \
+	$(top_srcdir)/m4/virt-pciaccess.m4 \
+	$(top_srcdir)/m4/virt-pm-utils.m4 \
+	$(top_srcdir)/m4/virt-polkit.m4 \
+	$(top_srcdir)/m4/virt-pthread.m4 \
+	$(top_srcdir)/m4/virt-readline.m4 \
+	$(top_srcdir)/m4/virt-result.m4 \
+	$(top_srcdir)/m4/virt-sanlock.m4 $(top_srcdir)/m4/virt-sasl.m4 \
+	$(top_srcdir)/m4/virt-secdriver-apparmor.m4 \
+	$(top_srcdir)/m4/virt-secdriver-selinux.m4 \
+	$(top_srcdir)/m4/virt-selinux.m4 $(top_srcdir)/m4/virt-ssh2.m4 \
+	$(top_srcdir)/m4/virt-storage-dir.m4 \
+	$(top_srcdir)/m4/virt-storage-disk.m4 \
+	$(top_srcdir)/m4/virt-storage-fs.m4 \
+	$(top_srcdir)/m4/virt-storage-gluster.m4 \
+	$(top_srcdir)/m4/virt-storage-iscsi-direct.m4 \
+	$(top_srcdir)/m4/virt-storage-iscsi.m4 \
+	$(top_srcdir)/m4/virt-storage-lvm.m4 \
+	$(top_srcdir)/m4/virt-storage-mpath.m4 \
+	$(top_srcdir)/m4/virt-storage-rbd.m4 \
+	$(top_srcdir)/m4/virt-storage-scsi.m4 \
+	$(top_srcdir)/m4/virt-storage-sheepdog.m4 \
+	$(top_srcdir)/m4/virt-storage-vstorage.m4 \
+	$(top_srcdir)/m4/virt-storage-zfs.m4 \
+	$(top_srcdir)/m4/virt-sysctl.m4 \
+	$(top_srcdir)/m4/virt-tls-priority.m4 \
+	$(top_srcdir)/m4/virt-udev.m4 \
+	$(top_srcdir)/m4/virt-virtualport.m4 \
+	$(top_srcdir)/m4/virt-win-common.m4 \
+	$(top_srcdir)/m4/virt-win-cygwin.m4 \
+	$(top_srcdir)/m4/virt-win-mingw.m4 \
+	$(top_srcdir)/m4/virt-win-symbols.m4 \
+	$(top_srcdir)/m4/virt-win-windres.m4 \
+	$(top_srcdir)/m4/virt-wireshark.m4 \
+	$(top_srcdir)/m4/virt-xdr.m4 $(top_srcdir)/m4/virt-yajl.m4 \
+	$(top_srcdir)/m4/waitpid.m4 $(top_srcdir)/m4/warnings.m4 \
+	$(top_srcdir)/m4/wchar_h.m4 $(top_srcdir)/m4/wchar_t.m4 \
+	$(top_srcdir)/m4/wctype_h.m4 $(top_srcdir)/m4/wcwidth.m4 \
+	$(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/m4/xsize.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = run .color_coded .ycm_extra_conf.py libvirt.pc \
+	libvirt-qemu.pc libvirt-lxc.pc libvirt-admin.pc libvirt.spec \
+	mingw-libvirt.spec
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
+DATA = $(pkgconfig_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir distdir-am dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/.color_coded.in \
+	$(srcdir)/.ycm_extra_conf.py.in $(srcdir)/Makefile.in \
+	$(srcdir)/config.h.in $(srcdir)/libvirt-admin.pc.in \
+	$(srcdir)/libvirt-lxc.pc.in $(srcdir)/libvirt-qemu.pc.in \
+	$(srcdir)/libvirt.pc.in $(srcdir)/libvirt.spec.in \
+	$(srcdir)/mingw-libvirt.spec.in $(srcdir)/run.in \
+	$(top_srcdir)/build-aux/compile \
+	$(top_srcdir)/build-aux/config.guess \
+	$(top_srcdir)/build-aux/config.sub \
+	$(top_srcdir)/build-aux/install-sh \
+	$(top_srcdir)/build-aux/ltmain.sh \
+	$(top_srcdir)/build-aux/missing ABOUT-NLS COPYING \
+	COPYING.LESSER ChangeLog INSTALL NEWS README build-aux/compile \
+	build-aux/config.guess build-aux/config.sub build-aux/depcomp \
+	build-aux/install-sh build-aux/ltmain.sh build-aux/missing
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+GZIP_ENV = --best
+DIST_ARCHIVES = $(distdir).tar.xz
+DIST_TARGETS = dist-xz
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+pkglibexecdir = @pkglibexecdir@
+ACLOCAL = @ACLOCAL@
+ACL_CFLAGS = @ACL_CFLAGS@
+ACL_LIBS = @ACL_LIBS@
+ADDR2LINE = @ADDR2LINE@
+ALLOCA = @ALLOCA@
+ALLOCA_H = @ALLOCA_H@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+APPARMOR_CFLAGS = @APPARMOR_CFLAGS@
+APPARMOR_LIBS = @APPARMOR_LIBS@
+APPLE_UNIVERSAL_BUILD = @APPLE_UNIVERSAL_BUILD@
+AR = @AR@
+ARFLAGS = @ARFLAGS@
+AS = @AS@
+ASM_SYMBOL_PREFIX = @ASM_SYMBOL_PREFIX@
+ATTR_CFLAGS = @ATTR_CFLAGS@
+ATTR_LIBS = @ATTR_LIBS@
+AUDIT_CFLAGS = @AUDIT_CFLAGS@
+AUDIT_LIBS = @AUDIT_LIBS@
+AUGPARSE = @AUGPARSE@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BASH_COMPLETIONS_DIR = @BASH_COMPLETIONS_DIR@
+BASH_COMPLETION_CFLAGS = @BASH_COMPLETION_CFLAGS@
+BASH_COMPLETION_LIBS = @BASH_COMPLETION_LIBS@
+BHYVE = @BHYVE@
+BHYVECTL = @BHYVECTL@
+BHYVELOAD = @BHYVELOAD@
+BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
+BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
+BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
+BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
+BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
+BLKID_CFLAGS = @BLKID_CFLAGS@
+BLKID_LIBS = @BLKID_LIBS@
+CAPNG_CFLAGS = @CAPNG_CFLAGS@
+CAPNG_LIBS = @CAPNG_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+COVERAGE_CFLAGS = @COVERAGE_CFLAGS@
+COVERAGE_LDFLAGS = @COVERAGE_LDFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURL_CFLAGS = @CURL_CFLAGS@
+CURL_LIBS = @CURL_LIBS@
+CYGPATH_W = @CYGPATH_W@
+CYGWIN_EXTRA_LDFLAGS = @CYGWIN_EXTRA_LDFLAGS@
+CYGWIN_EXTRA_LIBADD = @CYGWIN_EXTRA_LIBADD@
+DBUS_CFLAGS = @DBUS_CFLAGS@
+DBUS_LIBS = @DBUS_LIBS@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEVMAPPER_CFLAGS = @DEVMAPPER_CFLAGS@
+DEVMAPPER_LIBS = @DEVMAPPER_LIBS@
+DLLTOOL = @DLLTOOL@
+DLOPEN_LIBS = @DLOPEN_LIBS@
+DMIDECODE = @DMIDECODE@
+DNSMASQ = @DNSMASQ@
+DRIVER_MODULES_LDFLAGS = @DRIVER_MODULES_LDFLAGS@
+DRIVER_MODULES_LIBS = @DRIVER_MODULES_LIBS@
+DSYMUTIL = @DSYMUTIL@
+DTRACE = @DTRACE@
+DUMPBIN = @DUMPBIN@
+EBTABLES_PATH = @EBTABLES_PATH@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
+EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
+ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
+ENOLINK_VALUE = @ENOLINK_VALUE@
+EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
+EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
+ERRNO_H = @ERRNO_H@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FLAKE8 = @FLAKE8@
+FLOAT_H = @FLOAT_H@
+FUSE_CFLAGS = @FUSE_CFLAGS@
+FUSE_LIBS = @FUSE_LIBS@
+GETADDRINFO_LIB = @GETADDRINFO_LIB@
+GETHOSTNAME_LIB = @GETHOSTNAME_LIB@
+GLIB_CFLAGS = @GLIB_CFLAGS@
+GLIB_LIBS = @GLIB_LIBS@
+GLUSTERFS_CFLAGS = @GLUSTERFS_CFLAGS@
+GLUSTERFS_LIBS = @GLUSTERFS_LIBS@
+GNULIB_ACCEPT = @GNULIB_ACCEPT@
+GNULIB_ACCEPT4 = @GNULIB_ACCEPT4@
+GNULIB_ACCESS = @GNULIB_ACCESS@
+GNULIB_ATOLL = @GNULIB_ATOLL@
+GNULIB_BIND = @GNULIB_BIND@
+GNULIB_BTOWC = @GNULIB_BTOWC@
+GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
+GNULIB_CANONICALIZE_FILE_NAME = @GNULIB_CANONICALIZE_FILE_NAME@
+GNULIB_CHDIR = @GNULIB_CHDIR@
+GNULIB_CHOWN = @GNULIB_CHOWN@
+GNULIB_CLOSE = @GNULIB_CLOSE@
+GNULIB_CONNECT = @GNULIB_CONNECT@
+GNULIB_COPY_FILE_RANGE = @GNULIB_COPY_FILE_RANGE@
+GNULIB_CREAT = @GNULIB_CREAT@
+GNULIB_CTIME = @GNULIB_CTIME@
+GNULIB_DPRINTF = @GNULIB_DPRINTF@
+GNULIB_DUP = @GNULIB_DUP@
+GNULIB_DUP2 = @GNULIB_DUP2@
+GNULIB_DUP3 = @GNULIB_DUP3@
+GNULIB_DUPLOCALE = @GNULIB_DUPLOCALE@
+GNULIB_ENVIRON = @GNULIB_ENVIRON@
+GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
+GNULIB_EXPLICIT_BZERO = @GNULIB_EXPLICIT_BZERO@
+GNULIB_FACCESSAT = @GNULIB_FACCESSAT@
+GNULIB_FCHDIR = @GNULIB_FCHDIR@
+GNULIB_FCHMODAT = @GNULIB_FCHMODAT@
+GNULIB_FCHOWNAT = @GNULIB_FCHOWNAT@
+GNULIB_FCLOSE = @GNULIB_FCLOSE@
+GNULIB_FCNTL = @GNULIB_FCNTL@
+GNULIB_FDATASYNC = @GNULIB_FDATASYNC@
+GNULIB_FDOPEN = @GNULIB_FDOPEN@
+GNULIB_FFLUSH = @GNULIB_FFLUSH@
+GNULIB_FFSL = @GNULIB_FFSL@
+GNULIB_FFSLL = @GNULIB_FFSLL@
+GNULIB_FGETC = @GNULIB_FGETC@
+GNULIB_FGETS = @GNULIB_FGETS@
+GNULIB_FOPEN = @GNULIB_FOPEN@
+GNULIB_FORKPTY = @GNULIB_FORKPTY@
+GNULIB_FPRINTF = @GNULIB_FPRINTF@
+GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
+GNULIB_FPURGE = @GNULIB_FPURGE@
+GNULIB_FPUTC = @GNULIB_FPUTC@
+GNULIB_FPUTS = @GNULIB_FPUTS@
+GNULIB_FREAD = @GNULIB_FREAD@
+GNULIB_FREOPEN = @GNULIB_FREOPEN@
+GNULIB_FSCANF = @GNULIB_FSCANF@
+GNULIB_FSEEK = @GNULIB_FSEEK@
+GNULIB_FSEEKO = @GNULIB_FSEEKO@
+GNULIB_FSTAT = @GNULIB_FSTAT@
+GNULIB_FSTATAT = @GNULIB_FSTATAT@
+GNULIB_FSYNC = @GNULIB_FSYNC@
+GNULIB_FTELL = @GNULIB_FTELL@
+GNULIB_FTELLO = @GNULIB_FTELLO@
+GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
+GNULIB_FUTIMENS = @GNULIB_FUTIMENS@
+GNULIB_FWRITE = @GNULIB_FWRITE@
+GNULIB_GETADDRINFO = @GNULIB_GETADDRINFO@
+GNULIB_GETC = @GNULIB_GETC@
+GNULIB_GETCHAR = @GNULIB_GETCHAR@
+GNULIB_GETCWD = @GNULIB_GETCWD@
+GNULIB_GETDELIM = @GNULIB_GETDELIM@
+GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
+GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
+GNULIB_GETGROUPS = @GNULIB_GETGROUPS@
+GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
+GNULIB_GETLINE = @GNULIB_GETLINE@
+GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
+GNULIB_GETLOGIN = @GNULIB_GETLOGIN@
+GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
+GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
+GNULIB_GETPASS = @GNULIB_GETPASS@
+GNULIB_GETPEERNAME = @GNULIB_GETPEERNAME@
+GNULIB_GETSOCKNAME = @GNULIB_GETSOCKNAME@
+GNULIB_GETSOCKOPT = @GNULIB_GETSOCKOPT@
+GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
+GNULIB_GETTIMEOFDAY = @GNULIB_GETTIMEOFDAY@
+GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
+GNULIB_GRANTPT = @GNULIB_GRANTPT@
+GNULIB_GROUP_MEMBER = @GNULIB_GROUP_MEMBER@
+GNULIB_INET_NTOP = @GNULIB_INET_NTOP@
+GNULIB_INET_PTON = @GNULIB_INET_PTON@
+GNULIB_IOCTL = @GNULIB_IOCTL@
+GNULIB_ISATTY = @GNULIB_ISATTY@
+GNULIB_ISWBLANK = @GNULIB_ISWBLANK@
+GNULIB_ISWCTYPE = @GNULIB_ISWCTYPE@
+GNULIB_LCHMOD = @GNULIB_LCHMOD@
+GNULIB_LCHOWN = @GNULIB_LCHOWN@
+GNULIB_LINK = @GNULIB_LINK@
+GNULIB_LINKAT = @GNULIB_LINKAT@
+GNULIB_LISTEN = @GNULIB_LISTEN@
+GNULIB_LOCALECONV = @GNULIB_LOCALECONV@
+GNULIB_LOCALENAME = @GNULIB_LOCALENAME@
+GNULIB_LOCALTIME = @GNULIB_LOCALTIME@
+GNULIB_LSEEK = @GNULIB_LSEEK@
+GNULIB_LSTAT = @GNULIB_LSTAT@
+GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
+GNULIB_MBRLEN = @GNULIB_MBRLEN@
+GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
+GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
+GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
+GNULIB_MBSCHR = @GNULIB_MBSCHR@
+GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
+GNULIB_MBSINIT = @GNULIB_MBSINIT@
+GNULIB_MBSLEN = @GNULIB_MBSLEN@
+GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
+GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
+GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
+GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
+GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
+GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
+GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
+GNULIB_MBSSEP = @GNULIB_MBSSEP@
+GNULIB_MBSSPN = @GNULIB_MBSSPN@
+GNULIB_MBSSTR = @GNULIB_MBSSTR@
+GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
+GNULIB_MBTOWC = @GNULIB_MBTOWC@
+GNULIB_MEMCHR = @GNULIB_MEMCHR@
+GNULIB_MEMMEM = @GNULIB_MEMMEM@
+GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
+GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
+GNULIB_MKDIRAT = @GNULIB_MKDIRAT@
+GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
+GNULIB_MKFIFO = @GNULIB_MKFIFO@
+GNULIB_MKFIFOAT = @GNULIB_MKFIFOAT@
+GNULIB_MKNOD = @GNULIB_MKNOD@
+GNULIB_MKNODAT = @GNULIB_MKNODAT@
+GNULIB_MKOSTEMP = @GNULIB_MKOSTEMP@
+GNULIB_MKOSTEMPS = @GNULIB_MKOSTEMPS@
+GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
+GNULIB_MKSTEMPS = @GNULIB_MKSTEMPS@
+GNULIB_MKTIME = @GNULIB_MKTIME@
+GNULIB_NANOSLEEP = @GNULIB_NANOSLEEP@
+GNULIB_NONBLOCKING = @GNULIB_NONBLOCKING@
+GNULIB_OBSTACK_PRINTF = @GNULIB_OBSTACK_PRINTF@
+GNULIB_OBSTACK_PRINTF_POSIX = @GNULIB_OBSTACK_PRINTF_POSIX@
+GNULIB_OPEN = @GNULIB_OPEN@
+GNULIB_OPENAT = @GNULIB_OPENAT@
+GNULIB_OPENPTY = @GNULIB_OPENPTY@
+GNULIB_OVERRIDES_STRUCT_STAT = @GNULIB_OVERRIDES_STRUCT_STAT@
+GNULIB_OVERRIDES_WINT_T = @GNULIB_OVERRIDES_WINT_T@
+GNULIB_PCLOSE = @GNULIB_PCLOSE@
+GNULIB_PERROR = @GNULIB_PERROR@
+GNULIB_PIPE = @GNULIB_PIPE@
+GNULIB_PIPE2 = @GNULIB_PIPE2@
+GNULIB_POLL = @GNULIB_POLL@
+GNULIB_POPEN = @GNULIB_POPEN@
+GNULIB_POSIX_OPENPT = @GNULIB_POSIX_OPENPT@
+GNULIB_PREAD = @GNULIB_PREAD@
+GNULIB_PRINTF = @GNULIB_PRINTF@
+GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
+GNULIB_PSELECT = @GNULIB_PSELECT@
+GNULIB_PTHREAD_COND = @GNULIB_PTHREAD_COND@
+GNULIB_PTHREAD_MUTEX = @GNULIB_PTHREAD_MUTEX@
+GNULIB_PTHREAD_MUTEX_TIMEDLOCK = @GNULIB_PTHREAD_MUTEX_TIMEDLOCK@
+GNULIB_PTHREAD_ONCE = @GNULIB_PTHREAD_ONCE@
+GNULIB_PTHREAD_RWLOCK = @GNULIB_PTHREAD_RWLOCK@
+GNULIB_PTHREAD_SIGMASK = @GNULIB_PTHREAD_SIGMASK@
+GNULIB_PTHREAD_SPIN = @GNULIB_PTHREAD_SPIN@
+GNULIB_PTHREAD_THREAD = @GNULIB_PTHREAD_THREAD@
+GNULIB_PTHREAD_TSS = @GNULIB_PTHREAD_TSS@
+GNULIB_PTSNAME = @GNULIB_PTSNAME@
+GNULIB_PTSNAME_R = @GNULIB_PTSNAME_R@
+GNULIB_PUTC = @GNULIB_PUTC@
+GNULIB_PUTCHAR = @GNULIB_PUTCHAR@
+GNULIB_PUTENV = @GNULIB_PUTENV@
+GNULIB_PUTS = @GNULIB_PUTS@
+GNULIB_PWRITE = @GNULIB_PWRITE@
+GNULIB_QSORT_R = @GNULIB_QSORT_R@
+GNULIB_RAISE = @GNULIB_RAISE@
+GNULIB_RANDOM = @GNULIB_RANDOM@
+GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
+GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
+GNULIB_READ = @GNULIB_READ@
+GNULIB_READLINK = @GNULIB_READLINK@
+GNULIB_READLINKAT = @GNULIB_READLINKAT@
+GNULIB_REALLOCARRAY = @GNULIB_REALLOCARRAY@
+GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
+GNULIB_REALPATH = @GNULIB_REALPATH@
+GNULIB_RECV = @GNULIB_RECV@
+GNULIB_RECVFROM = @GNULIB_RECVFROM@
+GNULIB_REMOVE = @GNULIB_REMOVE@
+GNULIB_RENAME = @GNULIB_RENAME@
+GNULIB_RENAMEAT = @GNULIB_RENAMEAT@
+GNULIB_RMDIR = @GNULIB_RMDIR@
+GNULIB_RPMATCH = @GNULIB_RPMATCH@
+GNULIB_SCANF = @GNULIB_SCANF@
+GNULIB_SCHED_YIELD = @GNULIB_SCHED_YIELD@
+GNULIB_SECURE_GETENV = @GNULIB_SECURE_GETENV@
+GNULIB_SELECT = @GNULIB_SELECT@
+GNULIB_SEND = @GNULIB_SEND@
+GNULIB_SENDTO = @GNULIB_SENDTO@
+GNULIB_SETENV = @GNULIB_SETENV@
+GNULIB_SETHOSTNAME = @GNULIB_SETHOSTNAME@
+GNULIB_SETLOCALE = @GNULIB_SETLOCALE@
+GNULIB_SETLOCALE_NULL = @GNULIB_SETLOCALE_NULL@
+GNULIB_SETSOCKOPT = @GNULIB_SETSOCKOPT@
+GNULIB_SHUTDOWN = @GNULIB_SHUTDOWN@
+GNULIB_SIGACTION = @GNULIB_SIGACTION@
+GNULIB_SIGNAL_H_SIGPIPE = @GNULIB_SIGNAL_H_SIGPIPE@
+GNULIB_SIGPROCMASK = @GNULIB_SIGPROCMASK@
+GNULIB_SLEEP = @GNULIB_SLEEP@
+GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
+GNULIB_SOCKET = @GNULIB_SOCKET@
+GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
+GNULIB_STAT = @GNULIB_STAT@
+GNULIB_STDIO_H_NONBLOCKING = @GNULIB_STDIO_H_NONBLOCKING@
+GNULIB_STDIO_H_SIGPIPE = @GNULIB_STDIO_H_SIGPIPE@
+GNULIB_STPCPY = @GNULIB_STPCPY@
+GNULIB_STPNCPY = @GNULIB_STPNCPY@
+GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
+GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
+GNULIB_STRDUP = @GNULIB_STRDUP@
+GNULIB_STRERROR = @GNULIB_STRERROR@
+GNULIB_STRERROR_R = @GNULIB_STRERROR_R@
+GNULIB_STRFTIME = @GNULIB_STRFTIME@
+GNULIB_STRNCAT = @GNULIB_STRNCAT@
+GNULIB_STRNDUP = @GNULIB_STRNDUP@
+GNULIB_STRNLEN = @GNULIB_STRNLEN@
+GNULIB_STRPBRK = @GNULIB_STRPBRK@
+GNULIB_STRPTIME = @GNULIB_STRPTIME@
+GNULIB_STRSEP = @GNULIB_STRSEP@
+GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
+GNULIB_STRSTR = @GNULIB_STRSTR@
+GNULIB_STRTOD = @GNULIB_STRTOD@
+GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
+GNULIB_STRTOLD = @GNULIB_STRTOLD@
+GNULIB_STRTOLL = @GNULIB_STRTOLL@
+GNULIB_STRTOULL = @GNULIB_STRTOULL@
+GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
+GNULIB_SYMLINK = @GNULIB_SYMLINK@
+GNULIB_SYMLINKAT = @GNULIB_SYMLINKAT@
+GNULIB_SYSTEM_POSIX = @GNULIB_SYSTEM_POSIX@
+GNULIB_TCGETSID = @GNULIB_TCGETSID@
+GNULIB_TIMEGM = @GNULIB_TIMEGM@
+GNULIB_TIME_R = @GNULIB_TIME_R@
+GNULIB_TIME_RZ = @GNULIB_TIME_RZ@
+GNULIB_TMPFILE = @GNULIB_TMPFILE@
+GNULIB_TOWCTRANS = @GNULIB_TOWCTRANS@
+GNULIB_TRUNCATE = @GNULIB_TRUNCATE@
+GNULIB_TTYNAME_R = @GNULIB_TTYNAME_R@
+GNULIB_TZSET = @GNULIB_TZSET@
+GNULIB_UNAME = @GNULIB_UNAME@
+GNULIB_UNISTD_H_NONBLOCKING = @GNULIB_UNISTD_H_NONBLOCKING@
+GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
+GNULIB_UNLINK = @GNULIB_UNLINK@
+GNULIB_UNLINKAT = @GNULIB_UNLINKAT@
+GNULIB_UNLOCKPT = @GNULIB_UNLOCKPT@
+GNULIB_UNSETENV = @GNULIB_UNSETENV@
+GNULIB_USLEEP = @GNULIB_USLEEP@
+GNULIB_UTIMENSAT = @GNULIB_UTIMENSAT@
+GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
+GNULIB_VDPRINTF = @GNULIB_VDPRINTF@
+GNULIB_VFPRINTF = @GNULIB_VFPRINTF@
+GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
+GNULIB_VFSCANF = @GNULIB_VFSCANF@
+GNULIB_VPRINTF = @GNULIB_VPRINTF@
+GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
+GNULIB_VSCANF = @GNULIB_VSCANF@
+GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
+GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
+GNULIB_WAITPID = @GNULIB_WAITPID@
+GNULIB_WCPCPY = @GNULIB_WCPCPY@
+GNULIB_WCPNCPY = @GNULIB_WCPNCPY@
+GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
+GNULIB_WCSCASECMP = @GNULIB_WCSCASECMP@
+GNULIB_WCSCAT = @GNULIB_WCSCAT@
+GNULIB_WCSCHR = @GNULIB_WCSCHR@
+GNULIB_WCSCMP = @GNULIB_WCSCMP@
+GNULIB_WCSCOLL = @GNULIB_WCSCOLL@
+GNULIB_WCSCPY = @GNULIB_WCSCPY@
+GNULIB_WCSCSPN = @GNULIB_WCSCSPN@
+GNULIB_WCSDUP = @GNULIB_WCSDUP@
+GNULIB_WCSFTIME = @GNULIB_WCSFTIME@
+GNULIB_WCSLEN = @GNULIB_WCSLEN@
+GNULIB_WCSNCASECMP = @GNULIB_WCSNCASECMP@
+GNULIB_WCSNCAT = @GNULIB_WCSNCAT@
+GNULIB_WCSNCMP = @GNULIB_WCSNCMP@
+GNULIB_WCSNCPY = @GNULIB_WCSNCPY@
+GNULIB_WCSNLEN = @GNULIB_WCSNLEN@
+GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
+GNULIB_WCSPBRK = @GNULIB_WCSPBRK@
+GNULIB_WCSRCHR = @GNULIB_WCSRCHR@
+GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
+GNULIB_WCSSPN = @GNULIB_WCSSPN@
+GNULIB_WCSSTR = @GNULIB_WCSSTR@
+GNULIB_WCSTOK = @GNULIB_WCSTOK@
+GNULIB_WCSWIDTH = @GNULIB_WCSWIDTH@
+GNULIB_WCSXFRM = @GNULIB_WCSXFRM@
+GNULIB_WCTOB = @GNULIB_WCTOB@
+GNULIB_WCTOMB = @GNULIB_WCTOMB@
+GNULIB_WCTRANS = @GNULIB_WCTRANS@
+GNULIB_WCTYPE = @GNULIB_WCTYPE@
+GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
+GNULIB_WMEMCHR = @GNULIB_WMEMCHR@
+GNULIB_WMEMCMP = @GNULIB_WMEMCMP@
+GNULIB_WMEMCPY = @GNULIB_WMEMCPY@
+GNULIB_WMEMMOVE = @GNULIB_WMEMMOVE@
+GNULIB_WMEMSET = @GNULIB_WMEMSET@
+GNULIB_WRITE = @GNULIB_WRITE@
+GNULIB__EXIT = @GNULIB__EXIT@
+GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
+GNUTLS_LIBS = @GNUTLS_LIBS@
+GREP = @GREP@
+HAL_CFLAGS = @HAL_CFLAGS@
+HAL_LIBS = @HAL_LIBS@
+HAVE_ACCEPT4 = @HAVE_ACCEPT4@
+HAVE_ALLOCA_H = @HAVE_ALLOCA_H@
+HAVE_ARPA_INET_H = @HAVE_ARPA_INET_H@
+HAVE_ATOLL = @HAVE_ATOLL@
+HAVE_BTOWC = @HAVE_BTOWC@
+HAVE_C99_STDINT_H = @HAVE_C99_STDINT_H@
+HAVE_CANONICALIZE_FILE_NAME = @HAVE_CANONICALIZE_FILE_NAME@
+HAVE_CHOWN = @HAVE_CHOWN@
+HAVE_COPY_FILE_RANGE = @HAVE_COPY_FILE_RANGE@
+HAVE_CRTDEFS_H = @HAVE_CRTDEFS_H@
+HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
+HAVE_DECL_FCHDIR = @HAVE_DECL_FCHDIR@
+HAVE_DECL_FDATASYNC = @HAVE_DECL_FDATASYNC@
+HAVE_DECL_FPURGE = @HAVE_DECL_FPURGE@
+HAVE_DECL_FREEADDRINFO = @HAVE_DECL_FREEADDRINFO@
+HAVE_DECL_FSEEKO = @HAVE_DECL_FSEEKO@
+HAVE_DECL_FTELLO = @HAVE_DECL_FTELLO@
+HAVE_DECL_GAI_STRERROR = @HAVE_DECL_GAI_STRERROR@
+HAVE_DECL_GETADDRINFO = @HAVE_DECL_GETADDRINFO@
+HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
+HAVE_DECL_GETDOMAINNAME = @HAVE_DECL_GETDOMAINNAME@
+HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
+HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
+HAVE_DECL_GETLOGIN = @HAVE_DECL_GETLOGIN@
+HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
+HAVE_DECL_GETNAMEINFO = @HAVE_DECL_GETNAMEINFO@
+HAVE_DECL_GETPAGESIZE = @HAVE_DECL_GETPAGESIZE@
+HAVE_DECL_GETUSERSHELL = @HAVE_DECL_GETUSERSHELL@
+HAVE_DECL_INET_NTOP = @HAVE_DECL_INET_NTOP@
+HAVE_DECL_INET_PTON = @HAVE_DECL_INET_PTON@
+HAVE_DECL_INITSTATE = @HAVE_DECL_INITSTATE@
+HAVE_DECL_LOCALTIME_R = @HAVE_DECL_LOCALTIME_R@
+HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
+HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
+HAVE_DECL_OBSTACK_PRINTF = @HAVE_DECL_OBSTACK_PRINTF@
+HAVE_DECL_SETENV = @HAVE_DECL_SETENV@
+HAVE_DECL_SETHOSTNAME = @HAVE_DECL_SETHOSTNAME@
+HAVE_DECL_SETSTATE = @HAVE_DECL_SETSTATE@
+HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
+HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
+HAVE_DECL_STRERROR_R = @HAVE_DECL_STRERROR_R@
+HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
+HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
+HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
+HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
+HAVE_DECL_TCGETSID = @HAVE_DECL_TCGETSID@
+HAVE_DECL_TRUNCATE = @HAVE_DECL_TRUNCATE@
+HAVE_DECL_TTYNAME_R = @HAVE_DECL_TTYNAME_R@
+HAVE_DECL_UNSETENV = @HAVE_DECL_UNSETENV@
+HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
+HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
+HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
+HAVE_DPRINTF = @HAVE_DPRINTF@
+HAVE_DUP2 = @HAVE_DUP2@
+HAVE_DUP3 = @HAVE_DUP3@
+HAVE_DUPLOCALE = @HAVE_DUPLOCALE@
+HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
+HAVE_EXPLICIT_BZERO = @HAVE_EXPLICIT_BZERO@
+HAVE_FACCESSAT = @HAVE_FACCESSAT@
+HAVE_FCHDIR = @HAVE_FCHDIR@
+HAVE_FCHMODAT = @HAVE_FCHMODAT@
+HAVE_FCHOWNAT = @HAVE_FCHOWNAT@
+HAVE_FCNTL = @HAVE_FCNTL@
+HAVE_FDATASYNC = @HAVE_FDATASYNC@
+HAVE_FEATURES_H = @HAVE_FEATURES_H@
+HAVE_FFSL = @HAVE_FFSL@
+HAVE_FFSLL = @HAVE_FFSLL@
+HAVE_FORKPTY = @HAVE_FORKPTY@
+HAVE_FREELOCALE = @HAVE_FREELOCALE@
+HAVE_FSEEKO = @HAVE_FSEEKO@
+HAVE_FSTATAT = @HAVE_FSTATAT@
+HAVE_FSYNC = @HAVE_FSYNC@
+HAVE_FTELLO = @HAVE_FTELLO@
+HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
+HAVE_FUTIMENS = @HAVE_FUTIMENS@
+HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
+HAVE_GETGROUPS = @HAVE_GETGROUPS@
+HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
+HAVE_GETLOGIN = @HAVE_GETLOGIN@
+HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
+HAVE_GETPASS = @HAVE_GETPASS@
+HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
+HAVE_GETTIMEOFDAY = @HAVE_GETTIMEOFDAY@
+HAVE_GRANTPT = @HAVE_GRANTPT@
+HAVE_GROUP_MEMBER = @HAVE_GROUP_MEMBER@
+HAVE_INITSTATE = @HAVE_INITSTATE@
+HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
+HAVE_ISWBLANK = @HAVE_ISWBLANK@
+HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
+HAVE_LCHMOD = @HAVE_LCHMOD@
+HAVE_LCHOWN = @HAVE_LCHOWN@
+HAVE_LIBUTIL_H = @HAVE_LIBUTIL_H@
+HAVE_LINK = @HAVE_LINK@
+HAVE_LINKAT = @HAVE_LINKAT@
+HAVE_LSTAT = @HAVE_LSTAT@
+HAVE_MAX_ALIGN_T = @HAVE_MAX_ALIGN_T@
+HAVE_MBRLEN = @HAVE_MBRLEN@
+HAVE_MBRTOWC = @HAVE_MBRTOWC@
+HAVE_MBSINIT = @HAVE_MBSINIT@
+HAVE_MBSLEN = @HAVE_MBSLEN@
+HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
+HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
+HAVE_MBTOWC = @HAVE_MBTOWC@
+HAVE_MEMCHR = @HAVE_MEMCHR@
+HAVE_MEMPCPY = @HAVE_MEMPCPY@
+HAVE_MKDIRAT = @HAVE_MKDIRAT@
+HAVE_MKDTEMP = @HAVE_MKDTEMP@
+HAVE_MKFIFO = @HAVE_MKFIFO@
+HAVE_MKFIFOAT = @HAVE_MKFIFOAT@
+HAVE_MKNOD = @HAVE_MKNOD@
+HAVE_MKNODAT = @HAVE_MKNODAT@
+HAVE_MKOSTEMP = @HAVE_MKOSTEMP@
+HAVE_MKOSTEMPS = @HAVE_MKOSTEMPS@
+HAVE_MKSTEMP = @HAVE_MKSTEMP@
+HAVE_MKSTEMPS = @HAVE_MKSTEMPS@
+HAVE_MSVC_INVALID_PARAMETER_HANDLER = @HAVE_MSVC_INVALID_PARAMETER_HANDLER@
+HAVE_NANOSLEEP = @HAVE_NANOSLEEP@
+HAVE_NETDB_H = @HAVE_NETDB_H@
+HAVE_NETINET_IN_H = @HAVE_NETINET_IN_H@
+HAVE_NET_IF_H = @HAVE_NET_IF_H@
+HAVE_NEWLOCALE = @HAVE_NEWLOCALE@
+HAVE_OPENAT = @HAVE_OPENAT@
+HAVE_OPENPTY = @HAVE_OPENPTY@
+HAVE_OS_H = @HAVE_OS_H@
+HAVE_PCLOSE = @HAVE_PCLOSE@
+HAVE_PIPE = @HAVE_PIPE@
+HAVE_PIPE2 = @HAVE_PIPE2@
+HAVE_POLL = @HAVE_POLL@
+HAVE_POLL_H = @HAVE_POLL_H@
+HAVE_POPEN = @HAVE_POPEN@
+HAVE_POSIX_OPENPT = @HAVE_POSIX_OPENPT@
+HAVE_POSIX_SIGNALBLOCKING = @HAVE_POSIX_SIGNALBLOCKING@
+HAVE_PREAD = @HAVE_PREAD@
+HAVE_PSELECT = @HAVE_PSELECT@
+HAVE_PTHREAD_ATTR_DESTROY = @HAVE_PTHREAD_ATTR_DESTROY@
+HAVE_PTHREAD_ATTR_GETDETACHSTATE = @HAVE_PTHREAD_ATTR_GETDETACHSTATE@
+HAVE_PTHREAD_ATTR_INIT = @HAVE_PTHREAD_ATTR_INIT@
+HAVE_PTHREAD_ATTR_SETDETACHSTATE = @HAVE_PTHREAD_ATTR_SETDETACHSTATE@
+HAVE_PTHREAD_CONDATTR_DESTROY = @HAVE_PTHREAD_CONDATTR_DESTROY@
+HAVE_PTHREAD_CONDATTR_INIT = @HAVE_PTHREAD_CONDATTR_INIT@
+HAVE_PTHREAD_COND_BROADCAST = @HAVE_PTHREAD_COND_BROADCAST@
+HAVE_PTHREAD_COND_DESTROY = @HAVE_PTHREAD_COND_DESTROY@
+HAVE_PTHREAD_COND_INIT = @HAVE_PTHREAD_COND_INIT@
+HAVE_PTHREAD_COND_SIGNAL = @HAVE_PTHREAD_COND_SIGNAL@
+HAVE_PTHREAD_COND_TIMEDWAIT = @HAVE_PTHREAD_COND_TIMEDWAIT@
+HAVE_PTHREAD_COND_WAIT = @HAVE_PTHREAD_COND_WAIT@
+HAVE_PTHREAD_CREATE = @HAVE_PTHREAD_CREATE@
+HAVE_PTHREAD_CREATE_DETACHED = @HAVE_PTHREAD_CREATE_DETACHED@
+HAVE_PTHREAD_DETACH = @HAVE_PTHREAD_DETACH@
+HAVE_PTHREAD_EQUAL = @HAVE_PTHREAD_EQUAL@
+HAVE_PTHREAD_EXIT = @HAVE_PTHREAD_EXIT@
+HAVE_PTHREAD_GETSPECIFIC = @HAVE_PTHREAD_GETSPECIFIC@
+HAVE_PTHREAD_H = @HAVE_PTHREAD_H@
+HAVE_PTHREAD_JOIN = @HAVE_PTHREAD_JOIN@
+HAVE_PTHREAD_KEY_CREATE = @HAVE_PTHREAD_KEY_CREATE@
+HAVE_PTHREAD_KEY_DELETE = @HAVE_PTHREAD_KEY_DELETE@
+HAVE_PTHREAD_MUTEXATTR_DESTROY = @HAVE_PTHREAD_MUTEXATTR_DESTROY@
+HAVE_PTHREAD_MUTEXATTR_GETROBUST = @HAVE_PTHREAD_MUTEXATTR_GETROBUST@
+HAVE_PTHREAD_MUTEXATTR_GETTYPE = @HAVE_PTHREAD_MUTEXATTR_GETTYPE@
+HAVE_PTHREAD_MUTEXATTR_INIT = @HAVE_PTHREAD_MUTEXATTR_INIT@
+HAVE_PTHREAD_MUTEXATTR_SETROBUST = @HAVE_PTHREAD_MUTEXATTR_SETROBUST@
+HAVE_PTHREAD_MUTEXATTR_SETTYPE = @HAVE_PTHREAD_MUTEXATTR_SETTYPE@
+HAVE_PTHREAD_MUTEX_DESTROY = @HAVE_PTHREAD_MUTEX_DESTROY@
+HAVE_PTHREAD_MUTEX_INIT = @HAVE_PTHREAD_MUTEX_INIT@
+HAVE_PTHREAD_MUTEX_LOCK = @HAVE_PTHREAD_MUTEX_LOCK@
+HAVE_PTHREAD_MUTEX_RECURSIVE = @HAVE_PTHREAD_MUTEX_RECURSIVE@
+HAVE_PTHREAD_MUTEX_ROBUST = @HAVE_PTHREAD_MUTEX_ROBUST@
+HAVE_PTHREAD_MUTEX_TIMEDLOCK = @HAVE_PTHREAD_MUTEX_TIMEDLOCK@
+HAVE_PTHREAD_MUTEX_TRYLOCK = @HAVE_PTHREAD_MUTEX_TRYLOCK@
+HAVE_PTHREAD_MUTEX_UNLOCK = @HAVE_PTHREAD_MUTEX_UNLOCK@
+HAVE_PTHREAD_ONCE = @HAVE_PTHREAD_ONCE@
+HAVE_PTHREAD_PROCESS_SHARED = @HAVE_PTHREAD_PROCESS_SHARED@
+HAVE_PTHREAD_RWLOCKATTR_DESTROY = @HAVE_PTHREAD_RWLOCKATTR_DESTROY@
+HAVE_PTHREAD_RWLOCKATTR_INIT = @HAVE_PTHREAD_RWLOCKATTR_INIT@
+HAVE_PTHREAD_RWLOCK_DESTROY = @HAVE_PTHREAD_RWLOCK_DESTROY@
+HAVE_PTHREAD_RWLOCK_INIT = @HAVE_PTHREAD_RWLOCK_INIT@
+HAVE_PTHREAD_RWLOCK_RDLOCK = @HAVE_PTHREAD_RWLOCK_RDLOCK@
+HAVE_PTHREAD_RWLOCK_TIMEDRDLOCK = @HAVE_PTHREAD_RWLOCK_TIMEDRDLOCK@
+HAVE_PTHREAD_RWLOCK_TIMEDWRLOCK = @HAVE_PTHREAD_RWLOCK_TIMEDWRLOCK@
+HAVE_PTHREAD_RWLOCK_TRYRDLOCK = @HAVE_PTHREAD_RWLOCK_TRYRDLOCK@
+HAVE_PTHREAD_RWLOCK_TRYWRLOCK = @HAVE_PTHREAD_RWLOCK_TRYWRLOCK@
+HAVE_PTHREAD_RWLOCK_UNLOCK = @HAVE_PTHREAD_RWLOCK_UNLOCK@
+HAVE_PTHREAD_RWLOCK_WRLOCK = @HAVE_PTHREAD_RWLOCK_WRLOCK@
+HAVE_PTHREAD_SELF = @HAVE_PTHREAD_SELF@
+HAVE_PTHREAD_SETSPECIFIC = @HAVE_PTHREAD_SETSPECIFIC@
+HAVE_PTHREAD_SIGMASK = @HAVE_PTHREAD_SIGMASK@
+HAVE_PTHREAD_SPINLOCK_T = @HAVE_PTHREAD_SPINLOCK_T@
+HAVE_PTHREAD_SPIN_DESTROY = @HAVE_PTHREAD_SPIN_DESTROY@
+HAVE_PTHREAD_SPIN_INIT = @HAVE_PTHREAD_SPIN_INIT@
+HAVE_PTHREAD_SPIN_LOCK = @HAVE_PTHREAD_SPIN_LOCK@
+HAVE_PTHREAD_SPIN_TRYLOCK = @HAVE_PTHREAD_SPIN_TRYLOCK@
+HAVE_PTHREAD_SPIN_UNLOCK = @HAVE_PTHREAD_SPIN_UNLOCK@
+HAVE_PTHREAD_T = @HAVE_PTHREAD_T@
+HAVE_PTSNAME = @HAVE_PTSNAME@
+HAVE_PTSNAME_R = @HAVE_PTSNAME_R@
+HAVE_PTY_H = @HAVE_PTY_H@
+HAVE_PWRITE = @HAVE_PWRITE@
+HAVE_QSORT_R = @HAVE_QSORT_R@
+HAVE_RAISE = @HAVE_RAISE@
+HAVE_RANDOM = @HAVE_RANDOM@
+HAVE_RANDOM_H = @HAVE_RANDOM_H@
+HAVE_RANDOM_R = @HAVE_RANDOM_R@
+HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
+HAVE_READLINK = @HAVE_READLINK@
+HAVE_READLINKAT = @HAVE_READLINKAT@
+HAVE_REALLOCARRAY = @HAVE_REALLOCARRAY@
+HAVE_REALPATH = @HAVE_REALPATH@
+HAVE_RENAMEAT = @HAVE_RENAMEAT@
+HAVE_RPMATCH = @HAVE_RPMATCH@
+HAVE_SA_FAMILY_T = @HAVE_SA_FAMILY_T@
+HAVE_SCHED_H = @HAVE_SCHED_H@
+HAVE_SCHED_YIELD = @HAVE_SCHED_YIELD@
+HAVE_SECURE_GETENV = @HAVE_SECURE_GETENV@
+HAVE_SETENV = @HAVE_SETENV@
+HAVE_SETHOSTNAME = @HAVE_SETHOSTNAME@
+HAVE_SETSTATE = @HAVE_SETSTATE@
+HAVE_SIGACTION = @HAVE_SIGACTION@
+HAVE_SIGHANDLER_T = @HAVE_SIGHANDLER_T@
+HAVE_SIGINFO_T = @HAVE_SIGINFO_T@
+HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
+HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
+HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
+HAVE_SIGSET_T = @HAVE_SIGSET_T@
+HAVE_SLEEP = @HAVE_SLEEP@
+HAVE_STDINT_H = @HAVE_STDINT_H@
+HAVE_STPCPY = @HAVE_STPCPY@
+HAVE_STPNCPY = @HAVE_STPNCPY@
+HAVE_STRCASESTR = @HAVE_STRCASESTR@
+HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
+HAVE_STRPBRK = @HAVE_STRPBRK@
+HAVE_STRPTIME = @HAVE_STRPTIME@
+HAVE_STRSEP = @HAVE_STRSEP@
+HAVE_STRTOD = @HAVE_STRTOD@
+HAVE_STRTOLD = @HAVE_STRTOLD@
+HAVE_STRTOLL = @HAVE_STRTOLL@
+HAVE_STRTOULL = @HAVE_STRTOULL@
+HAVE_STRUCT_ADDRINFO = @HAVE_STRUCT_ADDRINFO@
+HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
+HAVE_STRUCT_SCHED_PARAM = @HAVE_STRUCT_SCHED_PARAM@
+HAVE_STRUCT_SIGACTION_SA_SIGACTION = @HAVE_STRUCT_SIGACTION_SA_SIGACTION@
+HAVE_STRUCT_SOCKADDR_STORAGE = @HAVE_STRUCT_SOCKADDR_STORAGE@
+HAVE_STRUCT_SOCKADDR_STORAGE_SS_FAMILY = @HAVE_STRUCT_SOCKADDR_STORAGE_SS_FAMILY@
+HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
+HAVE_STRUCT_UTSNAME = @HAVE_STRUCT_UTSNAME@
+HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
+HAVE_SYMLINK = @HAVE_SYMLINK@
+HAVE_SYMLINKAT = @HAVE_SYMLINKAT@
+HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
+HAVE_SYS_CDEFS_H = @HAVE_SYS_CDEFS_H@
+HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
+HAVE_SYS_IOCTL_H = @HAVE_SYS_IOCTL_H@
+HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
+HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
+HAVE_SYS_SELECT_H = @HAVE_SYS_SELECT_H@
+HAVE_SYS_SOCKET_H = @HAVE_SYS_SOCKET_H@
+HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
+HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
+HAVE_SYS_UIO_H = @HAVE_SYS_UIO_H@
+HAVE_SYS_UTSNAME_H = @HAVE_SYS_UTSNAME_H@
+HAVE_TERMIOS_H = @HAVE_TERMIOS_H@
+HAVE_TIMEGM = @HAVE_TIMEGM@
+HAVE_TIMEZONE_T = @HAVE_TIMEZONE_T@
+HAVE_TYPE_VOLATILE_SIG_ATOMIC_T = @HAVE_TYPE_VOLATILE_SIG_ATOMIC_T@
+HAVE_TZSET = @HAVE_TZSET@
+HAVE_UNAME = @HAVE_UNAME@
+HAVE_UNISTD_H = @HAVE_UNISTD_H@
+HAVE_UNLINKAT = @HAVE_UNLINKAT@
+HAVE_UNLOCKPT = @HAVE_UNLOCKPT@
+HAVE_USLEEP = @HAVE_USLEEP@
+HAVE_UTIL_H = @HAVE_UTIL_H@
+HAVE_UTIMENSAT = @HAVE_UTIMENSAT@
+HAVE_VASPRINTF = @HAVE_VASPRINTF@
+HAVE_VDPRINTF = @HAVE_VDPRINTF@
+HAVE_WCHAR_H = @HAVE_WCHAR_H@
+HAVE_WCHAR_T = @HAVE_WCHAR_T@
+HAVE_WCPCPY = @HAVE_WCPCPY@
+HAVE_WCPNCPY = @HAVE_WCPNCPY@
+HAVE_WCRTOMB = @HAVE_WCRTOMB@
+HAVE_WCSCASECMP = @HAVE_WCSCASECMP@
+HAVE_WCSCAT = @HAVE_WCSCAT@
+HAVE_WCSCHR = @HAVE_WCSCHR@
+HAVE_WCSCMP = @HAVE_WCSCMP@
+HAVE_WCSCOLL = @HAVE_WCSCOLL@
+HAVE_WCSCPY = @HAVE_WCSCPY@
+HAVE_WCSCSPN = @HAVE_WCSCSPN@
+HAVE_WCSDUP = @HAVE_WCSDUP@
+HAVE_WCSFTIME = @HAVE_WCSFTIME@
+HAVE_WCSLEN = @HAVE_WCSLEN@
+HAVE_WCSNCASECMP = @HAVE_WCSNCASECMP@
+HAVE_WCSNCAT = @HAVE_WCSNCAT@
+HAVE_WCSNCMP = @HAVE_WCSNCMP@
+HAVE_WCSNCPY = @HAVE_WCSNCPY@
+HAVE_WCSNLEN = @HAVE_WCSNLEN@
+HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
+HAVE_WCSPBRK = @HAVE_WCSPBRK@
+HAVE_WCSRCHR = @HAVE_WCSRCHR@
+HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
+HAVE_WCSSPN = @HAVE_WCSSPN@
+HAVE_WCSSTR = @HAVE_WCSSTR@
+HAVE_WCSTOK = @HAVE_WCSTOK@
+HAVE_WCSWIDTH = @HAVE_WCSWIDTH@
+HAVE_WCSXFRM = @HAVE_WCSXFRM@
+HAVE_WCTRANS_T = @HAVE_WCTRANS_T@
+HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
+HAVE_WCTYPE_T = @HAVE_WCTYPE_T@
+HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
+HAVE_WINT_T = @HAVE_WINT_T@
+HAVE_WMEMCHR = @HAVE_WMEMCHR@
+HAVE_WMEMCMP = @HAVE_WMEMCMP@
+HAVE_WMEMCPY = @HAVE_WMEMCPY@
+HAVE_WMEMMOVE = @HAVE_WMEMMOVE@
+HAVE_WMEMSET = @HAVE_WMEMSET@
+HAVE_WS2TCPIP_H = @HAVE_WS2TCPIP_H@
+HAVE_XLOCALE_H = @HAVE_XLOCALE_H@
+HAVE__BOOL = @HAVE__BOOL@
+HAVE__EXIT = @HAVE__EXIT@
+HOSTENT_LIB = @HOSTENT_LIB@
+IFCONFIG_PATH = @IFCONFIG_PATH@
+INCLUDE_NEXT = @INCLUDE_NEXT@
+INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
+INET_NTOP_LIB = @INET_NTOP_LIB@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IP6TABLES_PATH = @IP6TABLES_PATH@
+IPTABLES_PATH = @IPTABLES_PATH@
+IP_PATH = @IP_PATH@
+ISCSIADM = @ISCSIADM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBINTL = @LIBINTL@
+LIBISCSI_CFLAGS = @LIBISCSI_CFLAGS@
+LIBISCSI_LIBS = @LIBISCSI_LIBS@
+LIBMULTITHREAD = @LIBMULTITHREAD@
+LIBNL_CFLAGS = @LIBNL_CFLAGS@
+LIBNL_LIBS = @LIBNL_LIBS@
+LIBNL_ROUTE_CFLAGS = @LIBNL_ROUTE_CFLAGS@
+LIBNL_ROUTE_LIBS = @LIBNL_ROUTE_LIBS@
+LIBOBJS = @LIBOBJS@
+LIBPARTED_CFLAGS = @LIBPARTED_CFLAGS@
+LIBPARTED_LIBS = @LIBPARTED_LIBS@
+LIBPCAP_CFLAGS = @LIBPCAP_CFLAGS@
+LIBPCAP_LIBS = @LIBPCAP_LIBS@
+LIBPMULTITHREAD = @LIBPMULTITHREAD@
+LIBPTHREAD = @LIBPTHREAD@
+LIBRBD_LIBS = @LIBRBD_LIBS@
+LIBS = @LIBS@
+LIBSOCKET = @LIBSOCKET@
+LIBSSH_CFLAGS = @LIBSSH_CFLAGS@
+LIBSSH_LIBS = @LIBSSH_LIBS@
+LIBSTDTHREAD = @LIBSTDTHREAD@
+LIBTHREAD = @LIBTHREAD@
+LIBTOOL = @LIBTOOL@
+LIBUNISTRING_UNITYPES_H = @LIBUNISTRING_UNITYPES_H@
+LIBUNISTRING_UNIWIDTH_H = @LIBUNISTRING_UNIWIDTH_H@
+LIBVIRT_ADMIN_SYMBOL_FILE = @LIBVIRT_ADMIN_SYMBOL_FILE@
+LIBVIRT_LXC_SYMBOL_FILE = @LIBVIRT_LXC_SYMBOL_FILE@
+LIBVIRT_MAJOR_VERSION = @LIBVIRT_MAJOR_VERSION@
+LIBVIRT_MICRO_VERSION = @LIBVIRT_MICRO_VERSION@
+LIBVIRT_MINOR_VERSION = @LIBVIRT_MINOR_VERSION@
+LIBVIRT_NODELETE = @LIBVIRT_NODELETE@
+LIBVIRT_QEMU_SYMBOL_FILE = @LIBVIRT_QEMU_SYMBOL_FILE@
+LIBVIRT_SONUM = @LIBVIRT_SONUM@
+LIBVIRT_SYMBOL_FILE = @LIBVIRT_SYMBOL_FILE@
+LIBVIRT_VERSION = @LIBVIRT_VERSION@
+LIBVIRT_VERSION_INFO = @LIBVIRT_VERSION_INFO@
+LIBVIRT_VERSION_NUMBER = @LIBVIRT_VERSION_NUMBER@
+LIBXL_CFLAGS = @LIBXL_CFLAGS@
+LIBXL_LIBS = @LIBXL_LIBS@
+LIBXML_CFLAGS = @LIBXML_CFLAGS@
+LIBXML_LIBS = @LIBXML_LIBS@
+LIB_POLL = @LIB_POLL@
+LIB_PTHREAD = @LIB_PTHREAD@
+LIB_PTHREAD_SIGMASK = @LIB_PTHREAD_SIGMASK@
+LIB_SCHED_YIELD = @LIB_SCHED_YIELD@
+LIB_SELECT = @LIB_SELECT@
+LIMITS_H = @LIMITS_H@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
+LTALLOCA = @LTALLOCA@
+LTLIBINTL = @LTLIBINTL@
+LTLIBMULTITHREAD = @LTLIBMULTITHREAD@
+LTLIBOBJS = @LTLIBOBJS@
+LTLIBTHREAD = @LTLIBTHREAD@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LVCHANGE = @LVCHANGE@
+LVCREATE = @LVCREATE@
+LVREMOVE = @LVREMOVE@
+LVS = @LVS@
+LV_LIBTOOL_OBJDIR = @LV_LIBTOOL_OBJDIR@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MINGW_EXTRA_LDFLAGS = @MINGW_EXTRA_LDFLAGS@
+MKDIR_P = @MKDIR_P@
+MKFS = @MKFS@
+MMCTL = @MMCTL@
+MODPROBE = @MODPROBE@
+MOUNT = @MOUNT@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+NETCF_CFLAGS = @NETCF_CFLAGS@
+NETCF_LIBS = @NETCF_LIBS@
+NETINET_IN_H = @NETINET_IN_H@
+NET_IF_H = @NET_IF_H@
+NEXT_ARPA_INET_H = @NEXT_ARPA_INET_H@
+NEXT_AS_FIRST_DIRECTIVE_ARPA_INET_H = @NEXT_AS_FIRST_DIRECTIVE_ARPA_INET_H@
+NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = @NEXT_AS_FIRST_DIRECTIVE_ERRNO_H@
+NEXT_AS_FIRST_DIRECTIVE_FCNTL_H = @NEXT_AS_FIRST_DIRECTIVE_FCNTL_H@
+NEXT_AS_FIRST_DIRECTIVE_FLOAT_H = @NEXT_AS_FIRST_DIRECTIVE_FLOAT_H@
+NEXT_AS_FIRST_DIRECTIVE_LIMITS_H = @NEXT_AS_FIRST_DIRECTIVE_LIMITS_H@
+NEXT_AS_FIRST_DIRECTIVE_LOCALE_H = @NEXT_AS_FIRST_DIRECTIVE_LOCALE_H@
+NEXT_AS_FIRST_DIRECTIVE_NETDB_H = @NEXT_AS_FIRST_DIRECTIVE_NETDB_H@
+NEXT_AS_FIRST_DIRECTIVE_NETINET_IN_H = @NEXT_AS_FIRST_DIRECTIVE_NETINET_IN_H@
+NEXT_AS_FIRST_DIRECTIVE_NET_IF_H = @NEXT_AS_FIRST_DIRECTIVE_NET_IF_H@
+NEXT_AS_FIRST_DIRECTIVE_POLL_H = @NEXT_AS_FIRST_DIRECTIVE_POLL_H@
+NEXT_AS_FIRST_DIRECTIVE_PTHREAD_H = @NEXT_AS_FIRST_DIRECTIVE_PTHREAD_H@
+NEXT_AS_FIRST_DIRECTIVE_PTY_H = @NEXT_AS_FIRST_DIRECTIVE_PTY_H@
+NEXT_AS_FIRST_DIRECTIVE_SCHED_H = @NEXT_AS_FIRST_DIRECTIVE_SCHED_H@
+NEXT_AS_FIRST_DIRECTIVE_SIGNAL_H = @NEXT_AS_FIRST_DIRECTIVE_SIGNAL_H@
+NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@
+NEXT_AS_FIRST_DIRECTIVE_STDINT_H = @NEXT_AS_FIRST_DIRECTIVE_STDINT_H@
+NEXT_AS_FIRST_DIRECTIVE_STDIO_H = @NEXT_AS_FIRST_DIRECTIVE_STDIO_H@
+NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = @NEXT_AS_FIRST_DIRECTIVE_STDLIB_H@
+NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_IOCTL_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_IOCTL_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_SELECT_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_SELECT_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_SOCKET_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_SOCKET_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_TYPES_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_TYPES_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_UIO_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_UIO_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_UTSNAME_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_UTSNAME_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_WAIT_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_WAIT_H@
+NEXT_AS_FIRST_DIRECTIVE_TERMIOS_H = @NEXT_AS_FIRST_DIRECTIVE_TERMIOS_H@
+NEXT_AS_FIRST_DIRECTIVE_TIME_H = @NEXT_AS_FIRST_DIRECTIVE_TIME_H@
+NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = @NEXT_AS_FIRST_DIRECTIVE_UNISTD_H@
+NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@
+NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H@
+NEXT_ERRNO_H = @NEXT_ERRNO_H@
+NEXT_FCNTL_H = @NEXT_FCNTL_H@
+NEXT_FLOAT_H = @NEXT_FLOAT_H@
+NEXT_LIMITS_H = @NEXT_LIMITS_H@
+NEXT_LOCALE_H = @NEXT_LOCALE_H@
+NEXT_NETDB_H = @NEXT_NETDB_H@
+NEXT_NETINET_IN_H = @NEXT_NETINET_IN_H@
+NEXT_NET_IF_H = @NEXT_NET_IF_H@
+NEXT_POLL_H = @NEXT_POLL_H@
+NEXT_PTHREAD_H = @NEXT_PTHREAD_H@
+NEXT_PTY_H = @NEXT_PTY_H@
+NEXT_SCHED_H = @NEXT_SCHED_H@
+NEXT_SIGNAL_H = @NEXT_SIGNAL_H@
+NEXT_STDDEF_H = @NEXT_STDDEF_H@
+NEXT_STDINT_H = @NEXT_STDINT_H@
+NEXT_STDIO_H = @NEXT_STDIO_H@
+NEXT_STDLIB_H = @NEXT_STDLIB_H@
+NEXT_STRING_H = @NEXT_STRING_H@
+NEXT_SYS_IOCTL_H = @NEXT_SYS_IOCTL_H@
+NEXT_SYS_SELECT_H = @NEXT_SYS_SELECT_H@
+NEXT_SYS_SOCKET_H = @NEXT_SYS_SOCKET_H@
+NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
+NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
+NEXT_SYS_TYPES_H = @NEXT_SYS_TYPES_H@
+NEXT_SYS_UIO_H = @NEXT_SYS_UIO_H@
+NEXT_SYS_UTSNAME_H = @NEXT_SYS_UTSNAME_H@
+NEXT_SYS_WAIT_H = @NEXT_SYS_WAIT_H@
+NEXT_TERMIOS_H = @NEXT_TERMIOS_H@
+NEXT_TIME_H = @NEXT_TIME_H@
+NEXT_UNISTD_H = @NEXT_UNISTD_H@
+NEXT_WCHAR_H = @NEXT_WCHAR_H@
+NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NO_INDIRECT_LDFLAGS = @NO_INDIRECT_LDFLAGS@
+NO_UNDEFINED_LDFLAGS = @NO_UNDEFINED_LDFLAGS@
+NUMACTL_CFLAGS = @NUMACTL_CFLAGS@
+NUMACTL_LIBS = @NUMACTL_LIBS@
+NUMAD = @NUMAD@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OPENWSMAN_CFLAGS = @OPENWSMAN_CFLAGS@
+OPENWSMAN_LIBS = @OPENWSMAN_LIBS@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+OVSVSCTL = @OVSVSCTL@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PARALLELS_SDK_CFLAGS = @PARALLELS_SDK_CFLAGS@
+PARALLELS_SDK_LIBS = @PARALLELS_SDK_LIBS@
+PARTED = @PARTED@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
+PCIACCESS_LIBS = @PCIACCESS_LIBS@
+PERL = @PERL@
+PIE_CFLAGS = @PIE_CFLAGS@
+PIE_LDFLAGS = @PIE_LDFLAGS@
+PKCHECK_PATH = @PKCHECK_PATH@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSIX_SHELL = @POSIX_SHELL@
+PRAGMA_COLUMNS = @PRAGMA_COLUMNS@
+PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
+PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@
+PTHREAD_H_DEFINES_STRUCT_TIMESPEC = @PTHREAD_H_DEFINES_STRUCT_TIMESPEC@
+PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
+PTY_LIB = @PTY_LIB@
+PVCREATE = @PVCREATE@
+PVREMOVE = @PVREMOVE@
+PVS = @PVS@
+PYTHON = @PYTHON@
+QEMU_BRIDGE_HELPER = @QEMU_BRIDGE_HELPER@
+QEMU_PR_HELPER = @QEMU_PR_HELPER@
+QEMU_SLIRP_HELPER = @QEMU_SLIRP_HELPER@
+RADVD = @RADVD@
+RANLIB = @RANLIB@
+READLINE_CFLAGS = @READLINE_CFLAGS@
+READLINE_LIBS = @READLINE_LIBS@
+RELAXED_FRAME_LIMIT_CFLAGS = @RELAXED_FRAME_LIMIT_CFLAGS@
+RELRO_LDFLAGS = @RELRO_LDFLAGS@
+REPLACE_ACCESS = @REPLACE_ACCESS@
+REPLACE_BTOWC = @REPLACE_BTOWC@
+REPLACE_CALLOC = @REPLACE_CALLOC@
+REPLACE_CANONICALIZE_FILE_NAME = @REPLACE_CANONICALIZE_FILE_NAME@
+REPLACE_CHOWN = @REPLACE_CHOWN@
+REPLACE_CLOSE = @REPLACE_CLOSE@
+REPLACE_CREAT = @REPLACE_CREAT@
+REPLACE_CTIME = @REPLACE_CTIME@
+REPLACE_DPRINTF = @REPLACE_DPRINTF@
+REPLACE_DUP = @REPLACE_DUP@
+REPLACE_DUP2 = @REPLACE_DUP2@
+REPLACE_DUPLOCALE = @REPLACE_DUPLOCALE@
+REPLACE_FACCESSAT = @REPLACE_FACCESSAT@
+REPLACE_FCHOWNAT = @REPLACE_FCHOWNAT@
+REPLACE_FCLOSE = @REPLACE_FCLOSE@
+REPLACE_FCNTL = @REPLACE_FCNTL@
+REPLACE_FDOPEN = @REPLACE_FDOPEN@
+REPLACE_FFLUSH = @REPLACE_FFLUSH@
+REPLACE_FOPEN = @REPLACE_FOPEN@
+REPLACE_FORKPTY = @REPLACE_FORKPTY@
+REPLACE_FPRINTF = @REPLACE_FPRINTF@
+REPLACE_FPURGE = @REPLACE_FPURGE@
+REPLACE_FREELOCALE = @REPLACE_FREELOCALE@
+REPLACE_FREOPEN = @REPLACE_FREOPEN@
+REPLACE_FSEEK = @REPLACE_FSEEK@
+REPLACE_FSEEKO = @REPLACE_FSEEKO@
+REPLACE_FSTAT = @REPLACE_FSTAT@
+REPLACE_FSTATAT = @REPLACE_FSTATAT@
+REPLACE_FTELL = @REPLACE_FTELL@
+REPLACE_FTELLO = @REPLACE_FTELLO@
+REPLACE_FTRUNCATE = @REPLACE_FTRUNCATE@
+REPLACE_FUTIMENS = @REPLACE_FUTIMENS@
+REPLACE_GAI_STRERROR = @REPLACE_GAI_STRERROR@
+REPLACE_GETADDRINFO = @REPLACE_GETADDRINFO@
+REPLACE_GETCWD = @REPLACE_GETCWD@
+REPLACE_GETDELIM = @REPLACE_GETDELIM@
+REPLACE_GETDOMAINNAME = @REPLACE_GETDOMAINNAME@
+REPLACE_GETDTABLESIZE = @REPLACE_GETDTABLESIZE@
+REPLACE_GETGROUPS = @REPLACE_GETGROUPS@
+REPLACE_GETLINE = @REPLACE_GETLINE@
+REPLACE_GETLOGIN_R = @REPLACE_GETLOGIN_R@
+REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
+REPLACE_GETPASS = @REPLACE_GETPASS@
+REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
+REPLACE_GMTIME = @REPLACE_GMTIME@
+REPLACE_INET_NTOP = @REPLACE_INET_NTOP@
+REPLACE_INET_PTON = @REPLACE_INET_PTON@
+REPLACE_INITSTATE = @REPLACE_INITSTATE@
+REPLACE_IOCTL = @REPLACE_IOCTL@
+REPLACE_ISATTY = @REPLACE_ISATTY@
+REPLACE_ISWBLANK = @REPLACE_ISWBLANK@
+REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
+REPLACE_ITOLD = @REPLACE_ITOLD@
+REPLACE_LCHOWN = @REPLACE_LCHOWN@
+REPLACE_LINK = @REPLACE_LINK@
+REPLACE_LINKAT = @REPLACE_LINKAT@
+REPLACE_LOCALECONV = @REPLACE_LOCALECONV@
+REPLACE_LOCALTIME = @REPLACE_LOCALTIME@
+REPLACE_LOCALTIME_R = @REPLACE_LOCALTIME_R@
+REPLACE_LSEEK = @REPLACE_LSEEK@
+REPLACE_LSTAT = @REPLACE_LSTAT@
+REPLACE_MALLOC = @REPLACE_MALLOC@
+REPLACE_MBRLEN = @REPLACE_MBRLEN@
+REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
+REPLACE_MBSINIT = @REPLACE_MBSINIT@
+REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
+REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
+REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
+REPLACE_MBTOWC = @REPLACE_MBTOWC@
+REPLACE_MEMCHR = @REPLACE_MEMCHR@
+REPLACE_MEMMEM = @REPLACE_MEMMEM@
+REPLACE_MKDIR = @REPLACE_MKDIR@
+REPLACE_MKFIFO = @REPLACE_MKFIFO@
+REPLACE_MKNOD = @REPLACE_MKNOD@
+REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
+REPLACE_MKTIME = @REPLACE_MKTIME@
+REPLACE_NANOSLEEP = @REPLACE_NANOSLEEP@
+REPLACE_NEWLOCALE = @REPLACE_NEWLOCALE@
+REPLACE_NULL = @REPLACE_NULL@
+REPLACE_OBSTACK_PRINTF = @REPLACE_OBSTACK_PRINTF@
+REPLACE_OPEN = @REPLACE_OPEN@
+REPLACE_OPENAT = @REPLACE_OPENAT@
+REPLACE_OPENPTY = @REPLACE_OPENPTY@
+REPLACE_PERROR = @REPLACE_PERROR@
+REPLACE_POLL = @REPLACE_POLL@
+REPLACE_POPEN = @REPLACE_POPEN@
+REPLACE_PREAD = @REPLACE_PREAD@
+REPLACE_PRINTF = @REPLACE_PRINTF@
+REPLACE_PSELECT = @REPLACE_PSELECT@
+REPLACE_PTHREAD_ATTR_DESTROY = @REPLACE_PTHREAD_ATTR_DESTROY@
+REPLACE_PTHREAD_ATTR_GETDETACHSTATE = @REPLACE_PTHREAD_ATTR_GETDETACHSTATE@
+REPLACE_PTHREAD_ATTR_INIT = @REPLACE_PTHREAD_ATTR_INIT@
+REPLACE_PTHREAD_ATTR_SETDETACHSTATE = @REPLACE_PTHREAD_ATTR_SETDETACHSTATE@
+REPLACE_PTHREAD_CONDATTR_DESTROY = @REPLACE_PTHREAD_CONDATTR_DESTROY@
+REPLACE_PTHREAD_CONDATTR_INIT = @REPLACE_PTHREAD_CONDATTR_INIT@
+REPLACE_PTHREAD_COND_BROADCAST = @REPLACE_PTHREAD_COND_BROADCAST@
+REPLACE_PTHREAD_COND_DESTROY = @REPLACE_PTHREAD_COND_DESTROY@
+REPLACE_PTHREAD_COND_INIT = @REPLACE_PTHREAD_COND_INIT@
+REPLACE_PTHREAD_COND_SIGNAL = @REPLACE_PTHREAD_COND_SIGNAL@
+REPLACE_PTHREAD_COND_TIMEDWAIT = @REPLACE_PTHREAD_COND_TIMEDWAIT@
+REPLACE_PTHREAD_COND_WAIT = @REPLACE_PTHREAD_COND_WAIT@
+REPLACE_PTHREAD_CREATE = @REPLACE_PTHREAD_CREATE@
+REPLACE_PTHREAD_DETACH = @REPLACE_PTHREAD_DETACH@
+REPLACE_PTHREAD_EQUAL = @REPLACE_PTHREAD_EQUAL@
+REPLACE_PTHREAD_EXIT = @REPLACE_PTHREAD_EXIT@
+REPLACE_PTHREAD_GETSPECIFIC = @REPLACE_PTHREAD_GETSPECIFIC@
+REPLACE_PTHREAD_JOIN = @REPLACE_PTHREAD_JOIN@
+REPLACE_PTHREAD_KEY_CREATE = @REPLACE_PTHREAD_KEY_CREATE@
+REPLACE_PTHREAD_KEY_DELETE = @REPLACE_PTHREAD_KEY_DELETE@
+REPLACE_PTHREAD_MUTEXATTR_DESTROY = @REPLACE_PTHREAD_MUTEXATTR_DESTROY@
+REPLACE_PTHREAD_MUTEXATTR_GETROBUST = @REPLACE_PTHREAD_MUTEXATTR_GETROBUST@
+REPLACE_PTHREAD_MUTEXATTR_GETTYPE = @REPLACE_PTHREAD_MUTEXATTR_GETTYPE@
+REPLACE_PTHREAD_MUTEXATTR_INIT = @REPLACE_PTHREAD_MUTEXATTR_INIT@
+REPLACE_PTHREAD_MUTEXATTR_SETROBUST = @REPLACE_PTHREAD_MUTEXATTR_SETROBUST@
+REPLACE_PTHREAD_MUTEXATTR_SETTYPE = @REPLACE_PTHREAD_MUTEXATTR_SETTYPE@
+REPLACE_PTHREAD_MUTEX_DESTROY = @REPLACE_PTHREAD_MUTEX_DESTROY@
+REPLACE_PTHREAD_MUTEX_INIT = @REPLACE_PTHREAD_MUTEX_INIT@
+REPLACE_PTHREAD_MUTEX_LOCK = @REPLACE_PTHREAD_MUTEX_LOCK@
+REPLACE_PTHREAD_MUTEX_TIMEDLOCK = @REPLACE_PTHREAD_MUTEX_TIMEDLOCK@
+REPLACE_PTHREAD_MUTEX_TRYLOCK = @REPLACE_PTHREAD_MUTEX_TRYLOCK@
+REPLACE_PTHREAD_MUTEX_UNLOCK = @REPLACE_PTHREAD_MUTEX_UNLOCK@
+REPLACE_PTHREAD_ONCE = @REPLACE_PTHREAD_ONCE@
+REPLACE_PTHREAD_RWLOCKATTR_DESTROY = @REPLACE_PTHREAD_RWLOCKATTR_DESTROY@
+REPLACE_PTHREAD_RWLOCKATTR_INIT = @REPLACE_PTHREAD_RWLOCKATTR_INIT@
+REPLACE_PTHREAD_RWLOCK_DESTROY = @REPLACE_PTHREAD_RWLOCK_DESTROY@
+REPLACE_PTHREAD_RWLOCK_INIT = @REPLACE_PTHREAD_RWLOCK_INIT@
+REPLACE_PTHREAD_RWLOCK_RDLOCK = @REPLACE_PTHREAD_RWLOCK_RDLOCK@
+REPLACE_PTHREAD_RWLOCK_TIMEDRDLOCK = @REPLACE_PTHREAD_RWLOCK_TIMEDRDLOCK@
+REPLACE_PTHREAD_RWLOCK_TIMEDWRLOCK = @REPLACE_PTHREAD_RWLOCK_TIMEDWRLOCK@
+REPLACE_PTHREAD_RWLOCK_TRYRDLOCK = @REPLACE_PTHREAD_RWLOCK_TRYRDLOCK@
+REPLACE_PTHREAD_RWLOCK_TRYWRLOCK = @REPLACE_PTHREAD_RWLOCK_TRYWRLOCK@
+REPLACE_PTHREAD_RWLOCK_UNLOCK = @REPLACE_PTHREAD_RWLOCK_UNLOCK@
+REPLACE_PTHREAD_RWLOCK_WRLOCK = @REPLACE_PTHREAD_RWLOCK_WRLOCK@
+REPLACE_PTHREAD_SELF = @REPLACE_PTHREAD_SELF@
+REPLACE_PTHREAD_SETSPECIFIC = @REPLACE_PTHREAD_SETSPECIFIC@
+REPLACE_PTHREAD_SIGMASK = @REPLACE_PTHREAD_SIGMASK@
+REPLACE_PTHREAD_SPIN_DESTROY = @REPLACE_PTHREAD_SPIN_DESTROY@
+REPLACE_PTHREAD_SPIN_INIT = @REPLACE_PTHREAD_SPIN_INIT@
+REPLACE_PTHREAD_SPIN_LOCK = @REPLACE_PTHREAD_SPIN_LOCK@
+REPLACE_PTHREAD_SPIN_TRYLOCK = @REPLACE_PTHREAD_SPIN_TRYLOCK@
+REPLACE_PTHREAD_SPIN_UNLOCK = @REPLACE_PTHREAD_SPIN_UNLOCK@
+REPLACE_PTSNAME = @REPLACE_PTSNAME@
+REPLACE_PTSNAME_R = @REPLACE_PTSNAME_R@
+REPLACE_PUTENV = @REPLACE_PUTENV@
+REPLACE_PWRITE = @REPLACE_PWRITE@
+REPLACE_QSORT_R = @REPLACE_QSORT_R@
+REPLACE_RAISE = @REPLACE_RAISE@
+REPLACE_RANDOM = @REPLACE_RANDOM@
+REPLACE_RANDOM_R = @REPLACE_RANDOM_R@
+REPLACE_READ = @REPLACE_READ@
+REPLACE_READLINK = @REPLACE_READLINK@
+REPLACE_READLINKAT = @REPLACE_READLINKAT@
+REPLACE_REALLOC = @REPLACE_REALLOC@
+REPLACE_REALPATH = @REPLACE_REALPATH@
+REPLACE_REMOVE = @REPLACE_REMOVE@
+REPLACE_RENAME = @REPLACE_RENAME@
+REPLACE_RENAMEAT = @REPLACE_RENAMEAT@
+REPLACE_RMDIR = @REPLACE_RMDIR@
+REPLACE_SCHED_YIELD = @REPLACE_SCHED_YIELD@
+REPLACE_SELECT = @REPLACE_SELECT@
+REPLACE_SETENV = @REPLACE_SETENV@
+REPLACE_SETLOCALE = @REPLACE_SETLOCALE@
+REPLACE_SETSTATE = @REPLACE_SETSTATE@
+REPLACE_SLEEP = @REPLACE_SLEEP@
+REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
+REPLACE_SPRINTF = @REPLACE_SPRINTF@
+REPLACE_STAT = @REPLACE_STAT@
+REPLACE_STDIO_READ_FUNCS = @REPLACE_STDIO_READ_FUNCS@
+REPLACE_STDIO_WRITE_FUNCS = @REPLACE_STDIO_WRITE_FUNCS@
+REPLACE_STPNCPY = @REPLACE_STPNCPY@
+REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
+REPLACE_STRCHRNUL = @REPLACE_STRCHRNUL@
+REPLACE_STRDUP = @REPLACE_STRDUP@
+REPLACE_STRERROR = @REPLACE_STRERROR@
+REPLACE_STRERROR_R = @REPLACE_STRERROR_R@
+REPLACE_STRFTIME = @REPLACE_STRFTIME@
+REPLACE_STRNCAT = @REPLACE_STRNCAT@
+REPLACE_STRNDUP = @REPLACE_STRNDUP@
+REPLACE_STRNLEN = @REPLACE_STRNLEN@
+REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
+REPLACE_STRSTR = @REPLACE_STRSTR@
+REPLACE_STRTOD = @REPLACE_STRTOD@
+REPLACE_STRTOK_R = @REPLACE_STRTOK_R@
+REPLACE_STRTOLD = @REPLACE_STRTOLD@
+REPLACE_STRUCT_LCONV = @REPLACE_STRUCT_LCONV@
+REPLACE_STRUCT_TIMEVAL = @REPLACE_STRUCT_TIMEVAL@
+REPLACE_SYMLINK = @REPLACE_SYMLINK@
+REPLACE_SYMLINKAT = @REPLACE_SYMLINKAT@
+REPLACE_TIMEGM = @REPLACE_TIMEGM@
+REPLACE_TMPFILE = @REPLACE_TMPFILE@
+REPLACE_TOWLOWER = @REPLACE_TOWLOWER@
+REPLACE_TRUNCATE = @REPLACE_TRUNCATE@
+REPLACE_TTYNAME_R = @REPLACE_TTYNAME_R@
+REPLACE_TZSET = @REPLACE_TZSET@
+REPLACE_UNLINK = @REPLACE_UNLINK@
+REPLACE_UNLINKAT = @REPLACE_UNLINKAT@
+REPLACE_UNSETENV = @REPLACE_UNSETENV@
+REPLACE_USLEEP = @REPLACE_USLEEP@
+REPLACE_UTIMENSAT = @REPLACE_UTIMENSAT@
+REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
+REPLACE_VDPRINTF = @REPLACE_VDPRINTF@
+REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
+REPLACE_VPRINTF = @REPLACE_VPRINTF@
+REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
+REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
+REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
+REPLACE_WCSFTIME = @REPLACE_WCSFTIME@
+REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@
+REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
+REPLACE_WCSTOK = @REPLACE_WCSTOK@
+REPLACE_WCSWIDTH = @REPLACE_WCSWIDTH@
+REPLACE_WCTOB = @REPLACE_WCTOB@
+REPLACE_WCTOMB = @REPLACE_WCTOMB@
+REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
+REPLACE_WRITE = @REPLACE_WRITE@
+RMMOD = @RMMOD@
+RPCGEN = @RPCGEN@
+RST2HTML = @RST2HTML@
+RST2MAN = @RST2MAN@
+RUNUTF8 = @RUNUTF8@
+SANLOCK_CFLAGS = @SANLOCK_CFLAGS@
+SANLOCK_LIBS = @SANLOCK_LIBS@
+SASL_CFLAGS = @SASL_CFLAGS@
+SASL_LIBS = @SASL_LIBS@
+SCRUB = @SCRUB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SERVENT_LIB = @SERVENT_LIB@
+SET_MAKE = @SET_MAKE@
+SHEEPDOGCLI = @SHEEPDOGCLI@
+SHELL = @SHELL@
+SHOWMOUNT = @SHOWMOUNT@
+SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
+SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
+SSH2_CFLAGS = @SSH2_CFLAGS@
+SSH2_LIBS = @SSH2_LIBS@
+STATIC_BINARIES = @STATIC_BINARIES@
+STDALIGN_H = @STDALIGN_H@
+STDBOOL_H = @STDBOOL_H@
+STDDEF_H = @STDDEF_H@
+STDINT_H = @STDINT_H@
+STRIP = @STRIP@
+SYS_IOCTL_H_HAVE_WINSOCK2_H = @SYS_IOCTL_H_HAVE_WINSOCK2_H@
+SYS_IOCTL_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @SYS_IOCTL_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
+SYS_TIME_H_DEFINES_STRUCT_TIMESPEC = @SYS_TIME_H_DEFINES_STRUCT_TIMESPEC@
+TC = @TC@
+TIME_H_DEFINES_STRUCT_TIMESPEC = @TIME_H_DEFINES_STRUCT_TIMESPEC@
+UDEVADM = @UDEVADM@
+UDEV_CFLAGS = @UDEV_CFLAGS@
+UDEV_LIBS = @UDEV_LIBS@
+UMOUNT = @UMOUNT@
+UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@
+UNISTD_H_DEFINES_STRUCT_TIMESPEC = @UNISTD_H_DEFINES_STRUCT_TIMESPEC@
+UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
+UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
+VERSION = @VERSION@
+VERSION_SCRIPT_FLAGS = @VERSION_SCRIPT_FLAGS@
+VGCHANGE = @VGCHANGE@
+VGCREATE = @VGCREATE@
+VGREMOVE = @VGREMOVE@
+VGS = @VGS@
+VGSCAN = @VGSCAN@
+VIR_TEST_EXPENSIVE_DEFAULT = @VIR_TEST_EXPENSIVE_DEFAULT@
+VSTORAGE = @VSTORAGE@
+VSTORAGE_MOUNT = @VSTORAGE_MOUNT@
+WARN_CFLAGS = @WARN_CFLAGS@
+WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
+WIN32_EXTRA_CFLAGS = @WIN32_EXTRA_CFLAGS@
+WIN32_EXTRA_LIBS = @WIN32_EXTRA_LIBS@
+WINDOWS_64_BIT_OFF_T = @WINDOWS_64_BIT_OFF_T@
+WINDOWS_64_BIT_ST_SIZE = @WINDOWS_64_BIT_ST_SIZE@
+WINDOWS_STAT_INODES = @WINDOWS_STAT_INODES@
+WINDOWS_STAT_TIMESPEC = @WINDOWS_STAT_TIMESPEC@
+WINDRES = @WINDRES@
+WINT_T_SUFFIX = @WINT_T_SUFFIX@
+WIRESHARK_DISSECTOR_CFLAGS = @WIRESHARK_DISSECTOR_CFLAGS@
+WIRESHARK_DISSECTOR_LIBS = @WIRESHARK_DISSECTOR_LIBS@
+XDR_CFLAGS = @XDR_CFLAGS@
+XGETTEXT = @XGETTEXT@
+XMLLINT = @XMLLINT@
+XSLTPROC = @XSLTPROC@
+YAJL_CFLAGS = @YAJL_CFLAGS@
+YAJL_LIBS = @YAJL_LIBS@
+ZFS = @ZFS@
+ZPOOL = @ZPOOL@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+gl_LIBOBJS = @gl_LIBOBJS@
+gl_LTLIBOBJS = @gl_LTLIBOBJS@
+gltests_LIBOBJS = @gltests_LIBOBJS@
+gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
+gltests_WITNESS = @gltests_WITNESS@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+lispdir = @lispdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ws_plugindir = @ws_plugindir@
+LCOV = lcov
+GENHTML = genhtml
+
+# when building from tarball -Werror isn't auto enabled
+# so force it explicitly
+DISTCHECK_CONFIGURE_FLAGS = --enable-werror
+SUBDIRS = . gnulib/lib include/libvirt src tools docs \
+  tests po examples
+
+ACLOCAL_AMFLAGS = -I m4
+EXTRA_DIST = config-post.h libvirt.spec libvirt.spec.in \
+	mingw-libvirt.spec.in libvirt.pc.in libvirt-qemu.pc.in \
+	libvirt-lxc.pc.in libvirt-admin.pc.in Makefile.nonreentrant \
+	autogen.sh GNUmakefile run.in README.md AUTHORS.in \
+	scripts/apibuild.py scripts/augeas-gentest.py \
+	build-aux/check-spacing.pl scripts/check-aclperms.py \
+	scripts/check-aclrules.py scripts/check-drivername.py \
+	scripts/check-driverimpls.py scripts/check-file-access.py \
+	scripts/check-remote-protocol.py scripts/check-symfile.py \
+	scripts/check-symsorting.py scripts/dtrace2systemtap.py \
+	scripts/esx_vi_generator.py scripts/genaclperms.py \
+	scripts/genpolkit.py scripts/gensystemtap.py \
+	scripts/group-qemu-caps.py scripts/header-ifdef.py \
+	scripts/hvsupport.py scripts/hyperv_wmi_generator.py \
+	scripts/minimize-po.py scripts/mock-noinline.py \
+	scripts/prohibit-duplicate-header.py scripts/reformat-news.py \
+	scripts/test-wrap-argv.py build-aux/syntax-check.mk \
+	build-aux/useless-if-before-free build-aux/vc-list-files \
+	ci/Makefile ci/build.sh ci/list-images.sh ci/prepare.sh \
+	$(NULL) $(srcdir)/docs/news.xml $(srcdir)/docs/news-ascii.xsl \
+	$(NULL)
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = libvirt.pc libvirt-qemu.pc libvirt-lxc.pc libvirt-admin.pc
+MAINTAINERCLEANFILES = .git-module-status
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh: Makefile
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in:  $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+run: $(top_builddir)/config.status $(srcdir)/run.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+.color_coded: $(top_builddir)/config.status $(srcdir)/.color_coded.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+.ycm_extra_conf.py: $(top_builddir)/config.status $(srcdir)/.ycm_extra_conf.py.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+libvirt.pc: $(top_builddir)/config.status $(srcdir)/libvirt.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+libvirt-qemu.pc: $(top_builddir)/config.status $(srcdir)/libvirt-qemu.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+libvirt-lxc.pc: $(top_builddir)/config.status $(srcdir)/libvirt-lxc.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+libvirt-admin.pc: $(top_builddir)/config.status $(srcdir)/libvirt-admin.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+libvirt.spec: $(top_builddir)/config.status $(srcdir)/libvirt.spec.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+mingw-libvirt.spec: $(top_builddir)/config.status $(srcdir)/mingw-libvirt.spec.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+install-pkgconfigDATA: $(pkgconfig_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+	done
+
+uninstall-pkgconfigDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
+	$(am__post_remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
+
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
+
+dist-tarZ: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__post_remove_distdir)
+
+dist-shar: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
+	$(am__post_remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__post_remove_distdir)
+
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build/sub \
+	  && ../../configure \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=../.. --prefix="$$dc_install_base" \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__post_remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-recursive
+all-am: Makefile $(DATA) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr \
+	distclean-libtool distclean-local distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-pkgconfigDATA
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-pkgconfigDATA
+
+.MAKE: $(am__recursive_targets) all check-am install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--refresh check check-am check-local clean clean-cscope \
+	clean-generic clean-libtool cscope cscopelist-am ctags \
+	ctags-am dist dist-all dist-bzip2 dist-gzip dist-hook \
+	dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \
+	distclean distclean-generic distclean-hdr distclean-libtool \
+	distclean-local distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am uninstall-pkgconfigDATA
+
+.PRECIOUS: Makefile
+
+
+XZ_OPT ?= -v -T0
+export XZ_OPT
+
+NEWS: \
+	  $(srcdir)/docs/news.xml \
+	  $(srcdir)/docs/news-ascii.xsl \
+	  $(top_srcdir)/scripts/reformat-news.py
+	$(AM_V_GEN) \
+	if [ -x $(XSLTPROC) ]; then \
+	  $(XSLTPROC) --nonet \
+	    $(srcdir)/docs/news-ascii.xsl \
+	    $(srcdir)/docs/news.xml \
+	  >$@-tmp \
+	    || { rm -f $@-tmp; exit 1; }; \
+	  $(RUNUTF8) $(PYTHON) $(top_srcdir)/scripts/reformat-news.py $@-tmp >$@ \
+	    || { rm -f $@-tmp; exit 1; }; \
+	  rm -f $@-tmp; \
+	fi
+
+rpm: clean
+	@(unset CDPATH ; $(MAKE) dist && rpmbuild -ta $(distdir).tar.xz)
+
+srpm: clean
+	@(unset CDPATH ; $(MAKE) dist && rpmbuild -ts $(distdir).tar.xz)
+
+check-local: all tests
+
+check-access: all
+	@($(MAKE) $(AM_MAKEFLAGS) -C tests check-access)
+
+cov: clean-cov
+	$(MKDIR_P) $(top_builddir)/coverage
+	$(LCOV) -c -o $(top_builddir)/coverage/libvirt.info.tmp \
+	  -d $(top_builddir)/src \
+	  -d $(top_builddir)/tests
+	$(LCOV) -r $(top_builddir)/coverage/libvirt.info.tmp \
+	  -o $(top_builddir)/coverage/libvirt.info
+	rm $(top_builddir)/coverage/libvirt.info.tmp
+	$(GENHTML) --show-details -t "libvirt" -o $(top_builddir)/coverage \
+	  --legend $(top_builddir)/coverage/libvirt.info
+
+clean-cov:
+	rm -rf $(top_builddir)/coverage
+
+distclean-local: clean-GNUmakefile
+clean-GNUmakefile:
+	test '$(srcdir)' = . || rm -f $(top_builddir)/GNUmakefile
+
+dist-hook: gen-AUTHORS
+
+.PHONY: gen-AUTHORS
+gen-AUTHORS:
+	$(AM_V_GEN)\
+	if test -d $(srcdir)/.git; then \
+	  ( \
+	    cd $(srcdir) && \
+	    git log --pretty=format:'%aN <%aE>' | sort -u \
+	  ) > all.list && \
+	  sort -u $(srcdir)/AUTHORS.in > maint.list && \
+	  comm -23 all.list maint.list > contrib.list && \
+	  contrib="`cat contrib.list`" && \
+	  perl -p -e "s/#contributorslist#// and print '$$contrib'" \
+	    < $(srcdir)/AUTHORS.in > $(distdir)/AUTHORS-tmp && \
+	  mv -f $(distdir)/AUTHORS-tmp $(distdir)/AUTHORS && \
+	  rm -f all.list maint.list contrib.list; \
+	fi
+
+ci-%:
+	$(MAKE) -C $(srcdir)/ci/ $@
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 0000000000..202842dfd1
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,1719 @@
+# generated automatically by aclocal 1.16.1 -*- Autoconf -*-
+
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# pkg.m4 - Macros to locate and utilise pkg-config.   -*- Autoconf -*-
+# serial 11 (pkg-config-0.29.1)
+
+dnl Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+dnl Copyright © 2012-2015 Dan Nicholson <dbn.lists@gmail.com>
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 2 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful, but
+dnl WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+dnl General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program; if not, write to the Free Software
+dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+dnl 02111-1307, USA.
+dnl
+dnl As a special exception to the GNU General Public License, if you
+dnl distribute this file as part of a program that contains a
+dnl configuration script generated by Autoconf, you may include it under
+dnl the same distribution terms that you use for the rest of that
+dnl program.
+
+dnl PKG_PREREQ(MIN-VERSION)
+dnl -----------------------
+dnl Since: 0.29
+dnl
+dnl Verify that the version of the pkg-config macros are at least
+dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's
+dnl installed version of pkg-config, this checks the developer's version
+dnl of pkg.m4 when generating configure.
+dnl
+dnl To ensure that this macro is defined, also add:
+dnl m4_ifndef([PKG_PREREQ],
+dnl     [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])])
+dnl
+dnl See the "Since" comment for each macro you use to see what version
+dnl of the macros you require.
+m4_defun([PKG_PREREQ],
+[m4_define([PKG_MACROS_VERSION], [0.29.1])
+m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1,
+    [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])])
+])dnl PKG_PREREQ
+
+dnl PKG_PROG_PKG_CONFIG([MIN-VERSION])
+dnl ----------------------------------
+dnl Since: 0.16
+dnl
+dnl Search for the pkg-config tool and set the PKG_CONFIG variable to
+dnl first found in the path. Checks that the version of pkg-config found
+dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is
+dnl used since that's the first version where most current features of
+dnl pkg-config existed.
+AC_DEFUN([PKG_PROG_PKG_CONFIG],
+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
+m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
+AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
+AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=m4_default([$1], [0.9.0])
+	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_RESULT([no])
+		PKG_CONFIG=""
+	fi
+fi[]dnl
+])dnl PKG_PROG_PKG_CONFIG
+
+dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------------------------------
+dnl Since: 0.18
+dnl
+dnl Check to see whether a particular set of modules exists. Similar to
+dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
+dnl
+dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+dnl only at the first occurence in configure.ac, so if the first place
+dnl it's called might be skipped (such as if it is within an "if", you
+dnl have to call PKG_CHECK_EXISTS manually
+AC_DEFUN([PKG_CHECK_EXISTS],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+if test -n "$PKG_CONFIG" && \
+    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+  m4_default([$2], [:])
+m4_ifvaln([$3], [else
+  $3])dnl
+fi])
+
+dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+dnl ---------------------------------------------
+dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting
+dnl pkg_failed based on the result.
+m4_define([_PKG_CONFIG],
+[if test -n "$$1"; then
+    pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+    PKG_CHECK_EXISTS([$3],
+                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes ],
+		     [pkg_failed=yes])
+ else
+    pkg_failed=untried
+fi[]dnl
+])dnl _PKG_CONFIG
+
+dnl _PKG_SHORT_ERRORS_SUPPORTED
+dnl ---------------------------
+dnl Internal check to see if pkg-config supports short errors.
+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi[]dnl
+])dnl _PKG_SHORT_ERRORS_SUPPORTED
+
+
+dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl   [ACTION-IF-NOT-FOUND])
+dnl --------------------------------------------------------------
+dnl Since: 0.4.0
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES might not happen, you should be sure to include an
+dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
+AC_DEFUN([PKG_CHECK_MODULES],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
+
+pkg_failed=no
+AC_MSG_CHECKING([for $1])
+
+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
+
+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+and $1[]_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.])
+
+if test $pkg_failed = yes; then
+   	AC_MSG_RESULT([no])
+        _PKG_SHORT_ERRORS_SUPPORTED
+        if test $_pkg_short_errors_supported = yes; then
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
+        else 
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+
+	m4_default([$4], [AC_MSG_ERROR(
+[Package requirements ($2) were not met:
+
+$$1_PKG_ERRORS
+
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+_PKG_TEXT])[]dnl
+        ])
+elif test $pkg_failed = untried; then
+     	AC_MSG_RESULT([no])
+	m4_default([$4], [AC_MSG_FAILURE(
+[The pkg-config script could not be found or is too old.  Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+_PKG_TEXT
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
+        ])
+else
+	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+        AC_MSG_RESULT([yes])
+	$3
+fi[]dnl
+])dnl PKG_CHECK_MODULES
+
+
+dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl   [ACTION-IF-NOT-FOUND])
+dnl ---------------------------------------------------------------------
+dnl Since: 0.29
+dnl
+dnl Checks for existence of MODULES and gathers its build flags with
+dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags
+dnl and VARIABLE-PREFIX_LIBS from --libs.
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to
+dnl include an explicit call to PKG_PROG_PKG_CONFIG in your
+dnl configure.ac.
+AC_DEFUN([PKG_CHECK_MODULES_STATIC],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+_save_PKG_CONFIG=$PKG_CONFIG
+PKG_CONFIG="$PKG_CONFIG --static"
+PKG_CHECK_MODULES($@)
+PKG_CONFIG=$_save_PKG_CONFIG[]dnl
+])dnl PKG_CHECK_MODULES_STATIC
+
+
+dnl PKG_INSTALLDIR([DIRECTORY])
+dnl -------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable pkgconfigdir as the location where a module
+dnl should install pkg-config .pc files. By default the directory is
+dnl $libdir/pkgconfig, but the default can be changed by passing
+dnl DIRECTORY. The user can override through the --with-pkgconfigdir
+dnl parameter.
+AC_DEFUN([PKG_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+    [pkg-config installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([pkgconfigdir],
+    [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
+    [with_pkgconfigdir=]pkg_default)
+AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+])dnl PKG_INSTALLDIR
+
+
+dnl PKG_NOARCH_INSTALLDIR([DIRECTORY])
+dnl --------------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable noarch_pkgconfigdir as the location where a
+dnl module should install arch-independent pkg-config .pc files. By
+dnl default the directory is $datadir/pkgconfig, but the default can be
+dnl changed by passing DIRECTORY. The user can override through the
+dnl --with-noarch-pkgconfigdir parameter.
+AC_DEFUN([PKG_NOARCH_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+    [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([noarch-pkgconfigdir],
+    [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
+    [with_noarch_pkgconfigdir=]pkg_default)
+AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+])dnl PKG_NOARCH_INSTALLDIR
+
+
+dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
+dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------
+dnl Since: 0.28
+dnl
+dnl Retrieves the value of the pkg-config variable for the given module.
+AC_DEFUN([PKG_CHECK_VAR],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
+
+_PKG_CONFIG([$1], [variable="][$3]["], [$2])
+AS_VAR_COPY([$1], [pkg_cv_][$1])
+
+AS_VAR_IF([$1], [""], [$5], [$4])dnl
+])dnl PKG_CHECK_VAR
+
+dnl PKG_WITH_MODULES(VARIABLE-PREFIX, MODULES,
+dnl   [ACTION-IF-FOUND],[ACTION-IF-NOT-FOUND],
+dnl   [DESCRIPTION], [DEFAULT])
+dnl ------------------------------------------
+dnl
+dnl Prepare a "--with-" configure option using the lowercase
+dnl [VARIABLE-PREFIX] name, merging the behaviour of AC_ARG_WITH and
+dnl PKG_CHECK_MODULES in a single macro.
+AC_DEFUN([PKG_WITH_MODULES],
+[
+m4_pushdef([with_arg], m4_tolower([$1]))
+
+m4_pushdef([description],
+           [m4_default([$5], [build with ]with_arg[ support])])
+
+m4_pushdef([def_arg], [m4_default([$6], [auto])])
+m4_pushdef([def_action_if_found], [AS_TR_SH([with_]with_arg)=yes])
+m4_pushdef([def_action_if_not_found], [AS_TR_SH([with_]with_arg)=no])
+
+m4_case(def_arg,
+            [yes],[m4_pushdef([with_without], [--without-]with_arg)],
+            [m4_pushdef([with_without],[--with-]with_arg)])
+
+AC_ARG_WITH(with_arg,
+     AS_HELP_STRING(with_without, description[ @<:@default=]def_arg[@:>@]),,
+    [AS_TR_SH([with_]with_arg)=def_arg])
+
+AS_CASE([$AS_TR_SH([with_]with_arg)],
+            [yes],[PKG_CHECK_MODULES([$1],[$2],$3,$4)],
+            [auto],[PKG_CHECK_MODULES([$1],[$2],
+                                        [m4_n([def_action_if_found]) $3],
+                                        [m4_n([def_action_if_not_found]) $4])])
+
+m4_popdef([with_arg])
+m4_popdef([description])
+m4_popdef([def_arg])
+
+])dnl PKG_WITH_MODULES
+
+dnl PKG_HAVE_WITH_MODULES(VARIABLE-PREFIX, MODULES,
+dnl   [DESCRIPTION], [DEFAULT])
+dnl -----------------------------------------------
+dnl
+dnl Convenience macro to trigger AM_CONDITIONAL after PKG_WITH_MODULES
+dnl check._[VARIABLE-PREFIX] is exported as make variable.
+AC_DEFUN([PKG_HAVE_WITH_MODULES],
+[
+PKG_WITH_MODULES([$1],[$2],,,[$3],[$4])
+
+AM_CONDITIONAL([HAVE_][$1],
+               [test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"])
+])dnl PKG_HAVE_WITH_MODULES
+
+dnl PKG_HAVE_DEFINE_WITH_MODULES(VARIABLE-PREFIX, MODULES,
+dnl   [DESCRIPTION], [DEFAULT])
+dnl ------------------------------------------------------
+dnl
+dnl Convenience macro to run AM_CONDITIONAL and AC_DEFINE after
+dnl PKG_WITH_MODULES check. HAVE_[VARIABLE-PREFIX] is exported as make
+dnl and preprocessor variable.
+AC_DEFUN([PKG_HAVE_DEFINE_WITH_MODULES],
+[
+PKG_HAVE_WITH_MODULES([$1],[$2],[$3],[$4])
+
+AS_IF([test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"],
+        [AC_DEFINE([HAVE_][$1], 1, [Enable ]m4_tolower([$1])[ support])])
+])dnl PKG_HAVE_DEFINE_WITH_MODULES
+
+# Copyright (C) 2002-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.16'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.16.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.16.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
+      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
+      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
+      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                    [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+  [--enable-dependency-tracking],
+  [do not reject slow dependency extractors])
+AS_HELP_STRING(
+  [--disable-dependency-tracking],
+  [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  # TODO: see whether this extra hack can be removed once we start
+  # requiring Autoconf 2.70 or later.
+  AS_CASE([$CONFIG_FILES],
+          [*\'*], [eval set x "$CONFIG_FILES"],
+          [*], [set x $CONFIG_FILES])
+  shift
+  # Used to flag and report bootstrapping failures.
+  am_rc=0
+  for am_mf
+  do
+    # Strip MF so we end up with the name of the file.
+    am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile which includes
+    # dependency-tracking related rules and includes.
+    # Grep'ing the whole file directly is not great: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
+      || continue
+    am_dirpart=`AS_DIRNAME(["$am_mf"])`
+    am_filepart=`AS_BASENAME(["$am_mf"])`
+    AM_RUN_LOG([cd "$am_dirpart" \
+      && sed -e '/# am--include-marker/d' "$am_filepart" \
+        | $MAKE -f - am--depfiles]) || am_rc=$?
+  done
+  if test $am_rc -ne 0; then
+    AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments
+    for automatic dependency tracking.  Try re-running configure with the
+    '--disable-dependency-tracking' option to at least be able to build
+    the package (albeit without support for automatic dependency tracking).])
+  fi
+  AS_UNSET([am_dirpart])
+  AS_UNSET([am_filepart])
+  AS_UNSET([am_mf])
+  AS_UNSET([am_rc])
+  rm -f conftest-deps.mk
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking is enabled.
+# This creates each '.Po' and '.Plo' makefile fragment that we'll need in
+# order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+             [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+  [ok:ok],,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES([CC])],
+		  [m4_define([AC_PROG_CC],
+			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES([CXX])],
+		  [m4_define([AC_PROG_CXX],
+			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES([OBJC])],
+		  [m4_define([AC_PROG_OBJC],
+			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+		  [_AM_DEPENDENCIES([OBJCXX])],
+		  [m4_define([AC_PROG_OBJCXX],
+			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <https://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+  fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check whether make has an 'include' directive that can support all
+# the idioms we need for our automatic dependency tracking code.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive])
+cat > confinc.mk << 'END'
+am__doit:
+	@echo this is the am__doit target >confinc.out
+.PHONY: am__doit
+END
+am__include="#"
+am__quote=
+# BSD make does it like this.
+echo '.include "confinc.mk" # ignored' > confmf.BSD
+# Other make implementations (GNU, Solaris 10, AIX) do it like this.
+echo 'include confinc.mk # ignored' > confmf.GNU
+_am_result=no
+for s in GNU BSD; do
+  AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out])
+  AS_CASE([$?:`cat confinc.out 2>/dev/null`],
+      ['0:this is the am__doit target'],
+      [AS_CASE([$s],
+          [BSD], [am__include='.include' am__quote='"'],
+          [am__include='include' am__quote=''])])
+  if test "$am__include" != "#"; then
+    _am_result="yes ($s style)"
+    break
+  fi
+done
+rm -f confinc.* confmf.*
+AC_MSG_RESULT([${_am_result}])
+AC_SUBST([am__include])])
+AC_SUBST([am__quote])])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake.  We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+  [whether $CC understands -c and -o together],
+  [am_cv_prog_cc_c_o],
+  [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$[*]" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$[*]" != "X $srcdir/configure conftest.file" \
+	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment])
+     fi
+     if test "$[2]" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+  [AC_MSG_CHECKING([that generated files are newer than configure])
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+  [--enable-silent-rules],
+  [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+  [--disable-silent-rules],
+  [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+   [am_cv_make_support_nested_variables],
+   [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+  dnl Using '$V' instead of '$(V)' breaks IRIX make.
+  AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+  [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+  [m4_case([$1],
+    [ustar],
+     [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+      # There is notably a 21 bits limit for the UID and the GID.  In fact,
+      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+      # and bug#13588).
+      am_max_uid=2097151 # 2^21 - 1
+      am_max_gid=$am_max_uid
+      # The $UID and $GID variables are not portable, so we need to resort
+      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
+      # below are definitely unexpected, so allow the users to see them
+      # (that is, avoid stderr redirection).
+      am_uid=`id -u || echo unknown`
+      am_gid=`id -g || echo unknown`
+      AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+      if test $am_uid -le $am_max_uid; then
+         AC_MSG_RESULT([yes])
+      else
+         AC_MSG_RESULT([no])
+         _am_tools=none
+      fi
+      AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+      if test $am_gid -le $am_max_gid; then
+         AC_MSG_RESULT([yes])
+      else
+        AC_MSG_RESULT([no])
+        _am_tools=none
+      fi],
+
+  [pax],
+    [],
+
+  [m4_fatal([Unknown tar format])])
+
+  AC_MSG_CHECKING([how to create a $1 tar archive])
+
+  # Go ahead even if we have the value already cached.  We do so because we
+  # need to set the values for the 'am__tar' and 'am__untar' variables.
+  _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+  for _am_tool in $_am_tools; do
+    case $_am_tool in
+    gnutar)
+      for _am_tar in tar gnutar gtar; do
+        AM_RUN_LOG([$_am_tar --version]) && break
+      done
+      am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+      am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+      am__untar="$_am_tar -xf -"
+      ;;
+    plaintar)
+      # Must skip GNU tar: if it does not support --format= it doesn't create
+      # ustar tarball either.
+      (tar --version) >/dev/null 2>&1 && continue
+      am__tar='tar chf - "$$tardir"'
+      am__tar_='tar chf - "$tardir"'
+      am__untar='tar xf -'
+      ;;
+    pax)
+      am__tar='pax -L -x $1 -w "$$tardir"'
+      am__tar_='pax -L -x $1 -w "$tardir"'
+      am__untar='pax -r'
+      ;;
+    cpio)
+      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+      am__untar='cpio -i -H $1 -d'
+      ;;
+    none)
+      am__tar=false
+      am__tar_=false
+      am__untar=false
+      ;;
+    esac
+
+    # If the value was cached, stop now.  We just wanted to have am__tar
+    # and am__untar set.
+    test -n "${am_cv_prog_tar_$1}" && break
+
+    # tar/untar a dummy directory, and stop if the command works.
+    rm -rf conftest.dir
+    mkdir conftest.dir
+    echo GrepMe > conftest.dir/file
+    AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+    rm -rf conftest.dir
+    if test -s conftest.tar; then
+      AM_RUN_LOG([$am__untar <conftest.tar])
+      AM_RUN_LOG([cat conftest.dir/file])
+      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+    fi
+  done
+  rm -rf conftest.dir
+
+  AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+  AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([m4/00gnulib.m4])
+m4_include([m4/absolute-header.m4])
+m4_include([m4/alloca.m4])
+m4_include([m4/arpa_inet_h.m4])
+m4_include([m4/asm-underscore.m4])
+m4_include([m4/chown.m4])
+m4_include([m4/close.m4])
+m4_include([m4/codeset.m4])
+m4_include([m4/configmake.m4])
+m4_include([m4/dup2.m4])
+m4_include([m4/eealloc.m4])
+m4_include([m4/environ.m4])
+m4_include([m4/errno_h.m4])
+m4_include([m4/exponentd.m4])
+m4_include([m4/extensions.m4])
+m4_include([m4/extern-inline.m4])
+m4_include([m4/fcntl-o.m4])
+m4_include([m4/fcntl.m4])
+m4_include([m4/fcntl_h.m4])
+m4_include([m4/float_h.m4])
+m4_include([m4/fseek.m4])
+m4_include([m4/fseeko.m4])
+m4_include([m4/fstat.m4])
+m4_include([m4/getaddrinfo.m4])
+m4_include([m4/getdelim.m4])
+m4_include([m4/getdtablesize.m4])
+m4_include([m4/getgroups.m4])
+m4_include([m4/gethostname.m4])
+m4_include([m4/getline.m4])
+m4_include([m4/getpass.m4])
+m4_include([m4/getugroups.m4])
+m4_include([m4/gnulib-common.m4])
+m4_include([m4/gnulib-comp.m4])
+m4_include([m4/hostent.m4])
+m4_include([m4/include_next.m4])
+m4_include([m4/inet_ntop.m4])
+m4_include([m4/intmax_t.m4])
+m4_include([m4/inttypes_h.m4])
+m4_include([m4/ioctl.m4])
+m4_include([m4/largefile.m4])
+m4_include([m4/libtool.m4])
+m4_include([m4/libunistring-base.m4])
+m4_include([m4/limits-h.m4])
+m4_include([m4/localcharset.m4])
+m4_include([m4/locale_h.m4])
+m4_include([m4/localeconv.m4])
+m4_include([m4/lseek.m4])
+m4_include([m4/ltoptions.m4])
+m4_include([m4/ltsugar.m4])
+m4_include([m4/ltversion.m4])
+m4_include([m4/lt~obsolete.m4])
+m4_include([m4/malloc.m4])
+m4_include([m4/malloca.m4])
+m4_include([m4/manywarnings.m4])
+m4_include([m4/memchr.m4])
+m4_include([m4/mgetgroups.m4])
+m4_include([m4/mmap-anon.m4])
+m4_include([m4/mode_t.m4])
+m4_include([m4/msvc-inval.m4])
+m4_include([m4/msvc-nothrow.m4])
+m4_include([m4/multiarch.m4])
+m4_include([m4/net_if_h.m4])
+m4_include([m4/netdb_h.m4])
+m4_include([m4/netinet_in_h.m4])
+m4_include([m4/nonblocking.m4])
+m4_include([m4/off_t.m4])
+m4_include([m4/open-cloexec.m4])
+m4_include([m4/open-slash.m4])
+m4_include([m4/open.m4])
+m4_include([m4/passfd.m4])
+m4_include([m4/pathmax.m4])
+m4_include([m4/physmem.m4])
+m4_include([m4/pipe.m4])
+m4_include([m4/pipe2.m4])
+m4_include([m4/poll.m4])
+m4_include([m4/poll_h.m4])
+m4_include([m4/posix-shell.m4])
+m4_include([m4/posix_openpt.m4])
+m4_include([m4/printf.m4])
+m4_include([m4/pthread_h.m4])
+m4_include([m4/pthread_sigmask.m4])
+m4_include([m4/pty.m4])
+m4_include([m4/pty_h.m4])
+m4_include([m4/raise.m4])
+m4_include([m4/rawmemchr.m4])
+m4_include([m4/realloc.m4])
+m4_include([m4/sched_h.m4])
+m4_include([m4/select.m4])
+m4_include([m4/servent.m4])
+m4_include([m4/sigaction.m4])
+m4_include([m4/signal_h.m4])
+m4_include([m4/signalblocking.m4])
+m4_include([m4/sigpipe.m4])
+m4_include([m4/size_max.m4])
+m4_include([m4/snprintf.m4])
+m4_include([m4/socketlib.m4])
+m4_include([m4/sockets.m4])
+m4_include([m4/socklen.m4])
+m4_include([m4/sockpfaf.m4])
+m4_include([m4/ssize_t.m4])
+m4_include([m4/stat-time.m4])
+m4_include([m4/stat.m4])
+m4_include([m4/stdalign.m4])
+m4_include([m4/stdbool.m4])
+m4_include([m4/stddef_h.m4])
+m4_include([m4/stdint.m4])
+m4_include([m4/stdint_h.m4])
+m4_include([m4/stdio_h.m4])
+m4_include([m4/stdlib_h.m4])
+m4_include([m4/strchrnul.m4])
+m4_include([m4/strdup.m4])
+m4_include([m4/string_h.m4])
+m4_include([m4/strtok_r.m4])
+m4_include([m4/sys_ioctl_h.m4])
+m4_include([m4/sys_select_h.m4])
+m4_include([m4/sys_socket_h.m4])
+m4_include([m4/sys_stat_h.m4])
+m4_include([m4/sys_time_h.m4])
+m4_include([m4/sys_types_h.m4])
+m4_include([m4/sys_uio_h.m4])
+m4_include([m4/sys_utsname_h.m4])
+m4_include([m4/sys_wait_h.m4])
+m4_include([m4/termios_h.m4])
+m4_include([m4/threadlib.m4])
+m4_include([m4/time_h.m4])
+m4_include([m4/time_r.m4])
+m4_include([m4/ttyname_r.m4])
+m4_include([m4/uname.m4])
+m4_include([m4/unistd_h.m4])
+m4_include([m4/vasnprintf.m4])
+m4_include([m4/virt-acl.m4])
+m4_include([m4/virt-apparmor.m4])
+m4_include([m4/virt-arg.m4])
+m4_include([m4/virt-atomic.m4])
+m4_include([m4/virt-attr.m4])
+m4_include([m4/virt-audit.m4])
+m4_include([m4/virt-bash-completion.m4])
+m4_include([m4/virt-blkid.m4])
+m4_include([m4/virt-capng.m4])
+m4_include([m4/virt-chrdev-lock-files.m4])
+m4_include([m4/virt-compile-pie.m4])
+m4_include([m4/virt-compile-warnings.m4])
+m4_include([m4/virt-curl.m4])
+m4_include([m4/virt-dbus.m4])
+m4_include([m4/virt-debug.m4])
+m4_include([m4/virt-default-editor.m4])
+m4_include([m4/virt-devmapper.m4])
+m4_include([m4/virt-dlopen.m4])
+m4_include([m4/virt-driver-bhyve.m4])
+m4_include([m4/virt-driver-esx.m4])
+m4_include([m4/virt-driver-hyperv.m4])
+m4_include([m4/virt-driver-interface.m4])
+m4_include([m4/virt-driver-libvirtd.m4])
+m4_include([m4/virt-driver-libxl.m4])
+m4_include([m4/virt-driver-lxc.m4])
+m4_include([m4/virt-driver-modules.m4])
+m4_include([m4/virt-driver-network.m4])
+m4_include([m4/virt-driver-openvz.m4])
+m4_include([m4/virt-driver-qemu.m4])
+m4_include([m4/virt-driver-remote.m4])
+m4_include([m4/virt-driver-test.m4])
+m4_include([m4/virt-driver-vbox.m4])
+m4_include([m4/virt-driver-vmware.m4])
+m4_include([m4/virt-driver-vz.m4])
+m4_include([m4/virt-dtrace.m4])
+m4_include([m4/virt-external-programs.m4])
+m4_include([m4/virt-firewalld-zone.m4])
+m4_include([m4/virt-firewalld.m4])
+m4_include([m4/virt-fuse.m4])
+m4_include([m4/virt-glib.m4])
+m4_include([m4/virt-gluster.m4])
+m4_include([m4/virt-gnutls.m4])
+m4_include([m4/virt-hal.m4])
+m4_include([m4/virt-host-validate.m4])
+m4_include([m4/virt-init-script.m4])
+m4_include([m4/virt-lib.m4])
+m4_include([m4/virt-libiscsi.m4])
+m4_include([m4/virt-libnl.m4])
+m4_include([m4/virt-libpcap.m4])
+m4_include([m4/virt-libssh.m4])
+m4_include([m4/virt-libxml.m4])
+m4_include([m4/virt-linker-no-indirect.m4])
+m4_include([m4/virt-linker-no-undefined.m4])
+m4_include([m4/virt-linker-relro.m4])
+m4_include([m4/virt-loader-nvram.m4])
+m4_include([m4/virt-login-shell.m4])
+m4_include([m4/virt-macvtap.m4])
+m4_include([m4/virt-netcf.m4])
+m4_include([m4/virt-nls.m4])
+m4_include([m4/virt-nss.m4])
+m4_include([m4/virt-numactl.m4])
+m4_include([m4/virt-numad.m4])
+m4_include([m4/virt-nwfilter.m4])
+m4_include([m4/virt-openwsman.m4])
+m4_include([m4/virt-parted.m4])
+m4_include([m4/virt-pciaccess.m4])
+m4_include([m4/virt-pm-utils.m4])
+m4_include([m4/virt-polkit.m4])
+m4_include([m4/virt-pthread.m4])
+m4_include([m4/virt-readline.m4])
+m4_include([m4/virt-result.m4])
+m4_include([m4/virt-sanlock.m4])
+m4_include([m4/virt-sasl.m4])
+m4_include([m4/virt-secdriver-apparmor.m4])
+m4_include([m4/virt-secdriver-selinux.m4])
+m4_include([m4/virt-selinux.m4])
+m4_include([m4/virt-ssh2.m4])
+m4_include([m4/virt-storage-dir.m4])
+m4_include([m4/virt-storage-disk.m4])
+m4_include([m4/virt-storage-fs.m4])
+m4_include([m4/virt-storage-gluster.m4])
+m4_include([m4/virt-storage-iscsi-direct.m4])
+m4_include([m4/virt-storage-iscsi.m4])
+m4_include([m4/virt-storage-lvm.m4])
+m4_include([m4/virt-storage-mpath.m4])
+m4_include([m4/virt-storage-rbd.m4])
+m4_include([m4/virt-storage-scsi.m4])
+m4_include([m4/virt-storage-sheepdog.m4])
+m4_include([m4/virt-storage-vstorage.m4])
+m4_include([m4/virt-storage-zfs.m4])
+m4_include([m4/virt-sysctl.m4])
+m4_include([m4/virt-tls-priority.m4])
+m4_include([m4/virt-udev.m4])
+m4_include([m4/virt-virtualport.m4])
+m4_include([m4/virt-win-common.m4])
+m4_include([m4/virt-win-cygwin.m4])
+m4_include([m4/virt-win-mingw.m4])
+m4_include([m4/virt-win-symbols.m4])
+m4_include([m4/virt-win-windres.m4])
+m4_include([m4/virt-wireshark.m4])
+m4_include([m4/virt-xdr.m4])
+m4_include([m4/virt-yajl.m4])
+m4_include([m4/waitpid.m4])
+m4_include([m4/warnings.m4])
+m4_include([m4/wchar_h.m4])
+m4_include([m4/wchar_t.m4])
+m4_include([m4/wctype_h.m4])
+m4_include([m4/wcwidth.m4])
+m4_include([m4/wint_t.m4])
+m4_include([m4/xsize.m4])
diff --git a/build-aux/compile b/build-aux/compile
new file mode 100755
index 0000000000..99e50524b3
--- /dev/null
+++ b/build-aux/compile
@@ -0,0 +1,348 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.[oO][bB][jJ])
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
+  icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build-aux/config.guess b/build-aux/config.guess
new file mode 100755
index 0000000000..95b16c7747
--- /dev/null
+++ b/build-aux/config.guess
@@ -0,0 +1,1667 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright 1992-2019 Free Software Foundation, Inc.
+
+timestamp='2019-12-21'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+#
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
+#
+# You can get the latest version of this script from:
+# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+#
+# Please send patches to <config-patches@gnu.org>.
+
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Options:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright 1992-2019 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+tmp=
+# shellcheck disable=SC2172
+trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15
+
+set_cc_for_build() {
+    # prevent multiple calls if $tmp is already set
+    test "$tmp" && return 0
+    : "${TMPDIR=/tmp}"
+    # shellcheck disable=SC2039
+    { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+	{ test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } ||
+	{ tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+	{ echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; }
+    dummy=$tmp/dummy
+    case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in
+	,,)    echo "int x;" > "$dummy.c"
+	       for driver in cc gcc c89 c99 ; do
+		   if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
+		       CC_FOR_BUILD="$driver"
+		       break
+		   fi
+	       done
+	       if test x"$CC_FOR_BUILD" = x ; then
+		   CC_FOR_BUILD=no_compiler_found
+	       fi
+	       ;;
+	,,*)   CC_FOR_BUILD=$CC ;;
+	,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+    esac
+}
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if test -f /.attbin/uname ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+case "$UNAME_SYSTEM" in
+Linux|GNU|GNU/*)
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	LIBC=gnu
+
+	set_cc_for_build
+	cat <<-EOF > "$dummy.c"
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#else
+	LIBC=gnu
+	#endif
+	EOF
+	eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`"
+
+	# If ldd exists, use it to detect musl libc.
+	if command -v ldd >/dev/null && \
+		ldd --version 2>&1 | grep -q ^musl
+	then
+	    LIBC=musl
+	fi
+	;;
+esac
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
+	    "/sbin/$sysctl" 2>/dev/null || \
+	    "/usr/sbin/$sysctl" 2>/dev/null || \
+	    echo unknown)`
+	case "$UNAME_MACHINE_ARCH" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    earmv*)
+		arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
+		endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'`
+		machine="${arch}${endian}"-unknown
+		;;
+	    *) machine="$UNAME_MACHINE_ARCH"-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently (or will in the future) and ABI.
+	case "$UNAME_MACHINE_ARCH" in
+	    earm*)
+		os=netbsdelf
+		;;
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep -q __ELF__
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+		os=netbsd
+		;;
+	esac
+	# Determine ABI tags.
+	case "$UNAME_MACHINE_ARCH" in
+	    earm*)
+		expr='s/^earmv[0-9]/-eabi/;s/eb$//'
+		abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"`
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "$UNAME_VERSION" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "$machine-${os}${release}${abi-}"
+	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE"
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE"
+	exit ;;
+    *:LibertyBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
+	echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE"
+	exit ;;
+    *:MidnightBSD:*:*)
+	echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE"
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE"
+	exit ;;
+    *:SolidBSD:*:*)
+	echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE"
+	exit ;;
+    *:OS108:*:*)
+	echo "$UNAME_MACHINE"-unknown-os108_"$UNAME_RELEASE"
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd"$UNAME_RELEASE"
+	exit ;;
+    *:MirBSD:*:*)
+	echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE"
+	exit ;;
+    *:Sortix:*:*)
+	echo "$UNAME_MACHINE"-unknown-sortix
+	exit ;;
+    *:Twizzler:*:*)
+	echo "$UNAME_MACHINE"-unknown-twizzler
+	exit ;;
+    *:Redox:*:*)
+	echo "$UNAME_MACHINE"-unknown-redox
+	exit ;;
+    mips:OSF1:*.*)
+	echo mips-dec-osf1
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE=alpha ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE=alpha ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE=alpha ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE=alphaev5 ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE=alphaev56 ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE=alphapca56 ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE=alphapca57 ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE=alphaev6 ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE=alphaev67 ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE=alphaev69 ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE=alphaev7 ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE=alphaev79 ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`"
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo "$UNAME_MACHINE"-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo "$UNAME_MACHINE"-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+	echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix"$UNAME_RELEASE"
+	exit ;;
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    s390x:SunOS:*:*)
+	echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
+	exit ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
+	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux"$UNAME_RELEASE"
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	set_cc_for_build
+	SUN_ARCH=i386
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH=x86_64
+	    fi
+	fi
+	echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`"
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos"$UNAME_RELEASE"
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos"$UNAME_RELEASE"
+		;;
+	    sun4)
+		echo sparc-sun-sunos"$UNAME_RELEASE"
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos"$UNAME_RELEASE"
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint"$UNAME_RELEASE"
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint"$UNAME_RELEASE"
+	exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+	echo m68k-atari-mint"$UNAME_RELEASE"
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+	echo m68k-milan-mint"$UNAME_RELEASE"
+	exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+	echo m68k-hades-mint"$UNAME_RELEASE"
+	exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+	echo m68k-unknown-mint"$UNAME_RELEASE"
+	exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten"$UNAME_RELEASE"
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten"$UNAME_RELEASE"
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix"$UNAME_RELEASE"
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix"$UNAME_RELEASE"
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix"$UNAME_RELEASE"
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	set_cc_for_build
+	sed 's/^	//' << EOF > "$dummy.c"
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
+	  dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`"$dummy" "$dummyarg"` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos"$UNAME_RELEASE"
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ]
+	then
+	    if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \
+	       [ "$TARGET_BINARY_INTERFACE"x = x ]
+	    then
+		echo m88k-dg-dgux"$UNAME_RELEASE"
+	    else
+		echo m88k-dg-dguxbcs"$UNAME_RELEASE"
+	    fi
+	else
+	    echo i586-dg-dgux"$UNAME_RELEASE"
+	fi
+	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`"
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
+	fi
+	echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV"
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		set_cc_for_build
+		sed 's/^		//' << EOF > "$dummy.c"
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[4567])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/lslpp ] ; then
+		IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+			   awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
+	else
+		IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
+	fi
+	echo "$IBM_ARCH"-ibm-aix"$IBM_REV"
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd"$UNAME_RELEASE"   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
+	case "$UNAME_MACHINE" in
+	    9000/31?)            HP_ARCH=m68000 ;;
+	    9000/[34]??)         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case "$sc_cpu_version" in
+		      523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "$sc_kernel_bits" in
+			  32) HP_ARCH=hppa2.0n ;;
+			  64) HP_ARCH=hppa2.0w ;;
+			  '') HP_ARCH=hppa2.0 ;;   # HP-UX 10.20
+			esac ;;
+		    esac
+		fi
+		if [ "$HP_ARCH" = "" ]; then
+		    set_cc_for_build
+		    sed 's/^		//' << EOF > "$dummy.c"
+
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
+
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
+
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
+EOF
+		    (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ "$HP_ARCH" = hppa2.0w ]
+	then
+	    set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep -q __LP64__
+	    then
+		HP_ARCH=hppa2.0w
+	    else
+		HP_ARCH=hppa64
+	    fi
+	fi
+	echo "$HP_ARCH"-hp-hpux"$HPUX_REV"
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux"$HPUX_REV"
+	exit ;;
+    3050*:HI-UX:*:*)
+	set_cc_for_build
+	sed 's/^	//' << EOF > "$dummy.c"
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*)
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*)
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo "$UNAME_MACHINE"-unknown-osf1mk
+	else
+	    echo "$UNAME_MACHINE"-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+	exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+	exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+	exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+	exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+	FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'`
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    5000:UNIX_System_V:4.*:*)
+	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+	FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE"
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi"$UNAME_RELEASE"
+	exit ;;
+    *:BSD/OS:*:*)
+	echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE"
+	exit ;;
+    arm:FreeBSD:*:*)
+	UNAME_PROCESSOR=`uname -p`
+	set_cc_for_build
+	if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_PCS_VFP
+	then
+	    echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabi
+	else
+	    echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabihf
+	fi
+	exit ;;
+    *:FreeBSD:*:*)
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case "$UNAME_PROCESSOR" in
+	    amd64)
+		UNAME_PROCESSOR=x86_64 ;;
+	    i386)
+		UNAME_PROCESSOR=i586 ;;
+	esac
+	echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
+	exit ;;
+    i*:CYGWIN*:*)
+	echo "$UNAME_MACHINE"-pc-cygwin
+	exit ;;
+    *:MINGW64*:*)
+	echo "$UNAME_MACHINE"-pc-mingw64
+	exit ;;
+    *:MINGW*:*)
+	echo "$UNAME_MACHINE"-pc-mingw32
+	exit ;;
+    *:MSYS*:*)
+	echo "$UNAME_MACHINE"-pc-msys
+	exit ;;
+    i*:PW*:*)
+	echo "$UNAME_MACHINE"-pc-pw32
+	exit ;;
+    *:Interix*:*)
+	case "$UNAME_MACHINE" in
+	    x86)
+		echo i586-pc-interix"$UNAME_RELEASE"
+		exit ;;
+	    authenticamd | genuineintel | EM64T)
+		echo x86_64-unknown-interix"$UNAME_RELEASE"
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix"$UNAME_RELEASE"
+		exit ;;
+	esac ;;
+    i*:UWIN*:*)
+	echo "$UNAME_MACHINE"-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-pc-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`"
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC"
+	exit ;;
+    *:Minix:*:*)
+	echo "$UNAME_MACHINE"-unknown-minix
+	exit ;;
+    aarch64:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' /proc/cpuinfo 2>/dev/null` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    arm*:Linux:*:*)
+	set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	else
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi
+	    else
+		echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf
+	    fi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    cris:Linux:*:*)
+	echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
+	exit ;;
+    crisv32:Linux:*:*)
+	echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
+	exit ;;
+    e2k:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    frv:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    hexagon:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    i*86:Linux:*:*)
+	echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
+	exit ;;
+    ia64:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    k1om:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    m32r*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    m68*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    mips:Linux:*:* | mips64:Linux:*:*)
+	set_cc_for_build
+	IS_GLIBC=0
+	test x"${LIBC}" = xgnu && IS_GLIBC=1
+	sed 's/^	//' << EOF > "$dummy.c"
+	#undef CPU
+	#undef mips
+	#undef mipsel
+	#undef mips64
+	#undef mips64el
+	#if ${IS_GLIBC} && defined(_ABI64)
+	LIBCABI=gnuabi64
+	#else
+	#if ${IS_GLIBC} && defined(_ABIN32)
+	LIBCABI=gnuabin32
+	#else
+	LIBCABI=${LIBC}
+	#endif
+	#endif
+
+	#if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
+	CPU=mipsisa64r6
+	#else
+	#if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
+	CPU=mipsisa32r6
+	#else
+	#if defined(__mips64)
+	CPU=mips64
+	#else
+	CPU=mips
+	#endif
+	#endif
+	#endif
+
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	MIPS_ENDIAN=el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	MIPS_ENDIAN=
+	#else
+	MIPS_ENDIAN=
+	#endif
+	#endif
+EOF
+	eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'`"
+	test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; }
+	;;
+    mips64el:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    openrisc*:Linux:*:*)
+	echo or1k-unknown-linux-"$LIBC"
+	exit ;;
+    or32:Linux:*:* | or1k*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-"$LIBC"
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-"$LIBC"
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;;
+	  PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;;
+	  *)    echo hppa-unknown-linux-"$LIBC" ;;
+	esac
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-"$LIBC"
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-"$LIBC"
+	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-"$LIBC"
+	exit ;;
+    ppcle:Linux:*:*)
+	echo powerpcle-unknown-linux-"$LIBC"
+	exit ;;
+    riscv32:Linux:*:* | riscv64:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo "$UNAME_MACHINE"-ibm-linux-"$LIBC"
+	exit ;;
+    sh64*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    sh*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    tile*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    vax:Linux:*:*)
+	echo "$UNAME_MACHINE"-dec-linux-"$LIBC"
+	exit ;;
+    x86_64:Linux:*:*)
+	echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
+	exit ;;
+    xtensa*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+	# Use sysv4.2uw... so that sysv4* matches it.
+	echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION"
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo "$UNAME_MACHINE"-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo "$UNAME_MACHINE"-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo "$UNAME_MACHINE"-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo "$UNAME_MACHINE"-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+	echo i386-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    i*86:*DOS:*:*)
+	echo "$UNAME_MACHINE"-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:*)
+	UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL"
+	else
+		echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL"
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}"
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo "$UNAME_MACHINE"-pc-isc"$UNAME_REL"
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL"
+	else
+		echo "$UNAME_MACHINE"-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configure will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
+	exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv"$UNAME_RELEASE"  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3"$OS_REL"; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+	echo powerpc-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv"$UNAME_RELEASE"
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo "$UNAME_MACHINE"-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo "$UNAME_MACHINE"-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux"$UNAME_RELEASE"
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+		echo mips-nec-sysv"$UNAME_RELEASE"
+	else
+		echo mips-unknown-sysv"$UNAME_RELEASE"
+	fi
+	exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-ACE:SUPER-UX:*:*)
+	echo sxace-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody"$UNAME_RELEASE"
+	exit ;;
+    *:Rhapsody:*:*)
+	echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE"
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p`
+	case $UNAME_PROCESSOR in
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
+	if command -v xcode-select > /dev/null 2> /dev/null && \
+		! xcode-select --print-path > /dev/null 2> /dev/null ; then
+	    # Avoid executing cc if there is no toolchain installed as
+	    # cc will be a stub that puts up a graphical alert
+	    # prompting the user to install developer tools.
+	    CC_FOR_BUILD=no_compiler_found
+	else
+	    set_cc_for_build
+	fi
+	if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+	    if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		   (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		   grep IS_64BIT_ARCH >/dev/null
+	    then
+		case $UNAME_PROCESSOR in
+		    i386) UNAME_PROCESSOR=x86_64 ;;
+		    powerpc) UNAME_PROCESSOR=powerpc64 ;;
+		esac
+	    fi
+	    # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
+	    if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
+		   (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		   grep IS_PPC >/dev/null
+	    then
+		UNAME_PROCESSOR=powerpc
+	    fi
+	elif test "$UNAME_PROCESSOR" = i386 ; then
+	    # uname -m returns i386 or x86_64
+	    UNAME_PROCESSOR=$UNAME_MACHINE
+	fi
+	echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE"
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = x86; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE"
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NEO-*:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    NSE-*:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    NSR-*:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    NSV-*:NONSTOP_KERNEL:*:*)
+	echo nsv-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    NSX-*:NONSTOP_KERNEL:*:*)
+	echo nsx-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE"
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	# shellcheck disable=SC2154
+	if test "$cputype" = 386; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo "$UNAME_MACHINE"-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+	echo mips-sei-seiux"$UNAME_RELEASE"
+	exit ;;
+    *:DragonFly:*:*)
+	echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
+	exit ;;
+    *:*VMS:*:*)
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "$UNAME_MACHINE" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`"
+	exit ;;
+    i*86:rdos:*:*)
+	echo "$UNAME_MACHINE"-pc-rdos
+	exit ;;
+    i*86:AROS:*:*)
+	echo "$UNAME_MACHINE"-pc-aros
+	exit ;;
+    x86_64:VMkernel:*:*)
+	echo "$UNAME_MACHINE"-unknown-esx
+	exit ;;
+    amd64:Isilon\ OneFS:*:*)
+	echo x86_64-unknown-onefs
+	exit ;;
+    *:Unleashed:*:*)
+	echo "$UNAME_MACHINE"-unknown-unleashed"$UNAME_RELEASE"
+	exit ;;
+esac
+
+# No uname command or uname output not recognized.
+set_cc_for_build
+cat > "$dummy.c" <<EOF
+#ifdef _SEQUENT_
+#include <sys/types.h>
+#include <sys/utsname.h>
+#endif
+#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
+#if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
+#include <signal.h>
+#if defined(_SIZE_T_) || defined(SIGLOST)
+#include <sys/utsname.h>
+#endif
+#endif
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+  "4"
+#else
+  ""
+#endif
+  ); exit (0);
+#endif
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+  struct utsname un;
+
+  uname(&un);
+  if (strncmp(un.version, "V2", 2) == 0) {
+    printf ("i386-sequent-ptx2\n"); exit (0);
+  }
+  if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+    printf ("i386-sequent-ptx1\n"); exit (0);
+  }
+  printf ("i386-sequent-ptx\n"); exit (0);
+#endif
+
+#if defined (vax)
+#if !defined (ultrix)
+#include <sys/param.h>
+#if defined (BSD)
+#if BSD == 43
+  printf ("vax-dec-bsd4.3\n"); exit (0);
+#else
+#if BSD == 199006
+  printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#else
+  printf ("vax-dec-bsd\n"); exit (0);
+#endif
+#endif
+#else
+  printf ("vax-dec-bsd\n"); exit (0);
+#endif
+#else
+#if defined(_SIZE_T_) || defined(SIGLOST)
+  struct utsname un;
+  uname (&un);
+  printf ("vax-dec-ultrix%s\n", un.release); exit (0);
+#else
+  printf ("vax-dec-ultrix\n"); exit (0);
+#endif
+#endif
+#endif
+#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
+#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
+#if defined(_SIZE_T_) || defined(SIGLOST)
+  struct utsname *un;
+  uname (&un);
+  printf ("mips-dec-ultrix%s\n", un.release); exit (0);
+#else
+  printf ("mips-dec-ultrix\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; }
+
+echo "$0: unable to guess system type" >&2
+
+case "$UNAME_MACHINE:$UNAME_SYSTEM" in
+    mips:Linux | mips64:Linux)
+	# If we got here on MIPS GNU/Linux, output extra information.
+	cat >&2 <<EOF
+
+NOTE: MIPS GNU/Linux systems require a C compiler to fully recognize
+the system type. Please install a C compiler and try again.
+EOF
+	;;
+esac
+
+cat >&2 <<EOF
+
+This script (version $timestamp), has failed to recognize the
+operating system you are using. If your script is old, overwrite *all*
+copies of config.guess and config.sub with the latest versions from:
+
+  https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+and
+  https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+
+If $0 has already been updated, send the following data and any
+information you think might be pertinent to config-patches@gnu.org to
+provide the necessary information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = "$UNAME_MACHINE"
+UNAME_RELEASE = "$UNAME_RELEASE"
+UNAME_SYSTEM  = "$UNAME_SYSTEM"
+UNAME_VERSION = "$UNAME_VERSION"
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/build-aux/config.sub b/build-aux/config.sub
new file mode 100755
index 0000000000..0f2234c174
--- /dev/null
+++ b/build-aux/config.sub
@@ -0,0 +1,1793 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright 1992-2019 Free Software Foundation, Inc.
+
+timestamp='2019-06-30'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+
+
+# Please send patches to <config-patches@gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
+
+Canonicalize a configuration name.
+
+Options:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright 1992-2019 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo "$1"
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Split fields of configuration type
+# shellcheck disable=SC2162
+IFS="-" read field1 field2 field3 field4 <<EOF
+$1
+EOF
+
+# Separate into logical components for further validation
+case $1 in
+	*-*-*-*-*)
+		echo Invalid configuration \`"$1"\': more than four components >&2
+		exit 1
+		;;
+	*-*-*-*)
+		basic_machine=$field1-$field2
+		os=$field3-$field4
+		;;
+	*-*-*)
+		# Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two
+		# parts
+		maybe_os=$field2-$field3
+		case $maybe_os in
+			nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc \
+			| linux-newlib* | linux-musl* | linux-uclibc* | uclinux-uclibc* \
+			| uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \
+			| netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \
+			| storm-chaos* | os2-emx* | rtmk-nova*)
+				basic_machine=$field1
+				os=$maybe_os
+				;;
+			android-linux)
+				basic_machine=$field1-unknown
+				os=linux-android
+				;;
+			*)
+				basic_machine=$field1-$field2
+				os=$field3
+				;;
+		esac
+		;;
+	*-*)
+		# A lone config we happen to match not fitting any pattern
+		case $field1-$field2 in
+			decstation-3100)
+				basic_machine=mips-dec
+				os=
+				;;
+			*-*)
+				# Second component is usually, but not always the OS
+				case $field2 in
+					# Prevent following clause from handling this valid os
+					sun*os*)
+						basic_machine=$field1
+						os=$field2
+						;;
+					# Manufacturers
+					dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \
+					| att* | 7300* | 3300* | delta* | motorola* | sun[234]* \
+					| unicom* | ibm* | next | hp | isi* | apollo | altos* \
+					| convergent* | ncr* | news | 32* | 3600* | 3100* \
+					| hitachi* | c[123]* | convex* | sun | crds | omron* | dg \
+					| ultra | tti* | harris | dolphin | highlevel | gould \
+					| cbm | ns | masscomp | apple | axis | knuth | cray \
+					| microblaze* | sim | cisco \
+					| oki | wec | wrs | winbond)
+						basic_machine=$field1-$field2
+						os=
+						;;
+					*)
+						basic_machine=$field1
+						os=$field2
+						;;
+				esac
+			;;
+		esac
+		;;
+	*)
+		# Convert single-component short-hands not valid as part of
+		# multi-component configurations.
+		case $field1 in
+			386bsd)
+				basic_machine=i386-pc
+				os=bsd
+				;;
+			a29khif)
+				basic_machine=a29k-amd
+				os=udi
+				;;
+			adobe68k)
+				basic_machine=m68010-adobe
+				os=scout
+				;;
+			alliant)
+				basic_machine=fx80-alliant
+				os=
+				;;
+			altos | altos3068)
+				basic_machine=m68k-altos
+				os=
+				;;
+			am29k)
+				basic_machine=a29k-none
+				os=bsd
+				;;
+			amdahl)
+				basic_machine=580-amdahl
+				os=sysv
+				;;
+			amiga)
+				basic_machine=m68k-unknown
+				os=
+				;;
+			amigaos | amigados)
+				basic_machine=m68k-unknown
+				os=amigaos
+				;;
+			amigaunix | amix)
+				basic_machine=m68k-unknown
+				os=sysv4
+				;;
+			apollo68)
+				basic_machine=m68k-apollo
+				os=sysv
+				;;
+			apollo68bsd)
+				basic_machine=m68k-apollo
+				os=bsd
+				;;
+			aros)
+				basic_machine=i386-pc
+				os=aros
+				;;
+			aux)
+				basic_machine=m68k-apple
+				os=aux
+				;;
+			balance)
+				basic_machine=ns32k-sequent
+				os=dynix
+				;;
+			blackfin)
+				basic_machine=bfin-unknown
+				os=linux
+				;;
+			cegcc)
+				basic_machine=arm-unknown
+				os=cegcc
+				;;
+			convex-c1)
+				basic_machine=c1-convex
+				os=bsd
+				;;
+			convex-c2)
+				basic_machine=c2-convex
+				os=bsd
+				;;
+			convex-c32)
+				basic_machine=c32-convex
+				os=bsd
+				;;
+			convex-c34)
+				basic_machine=c34-convex
+				os=bsd
+				;;
+			convex-c38)
+				basic_machine=c38-convex
+				os=bsd
+				;;
+			cray)
+				basic_machine=j90-cray
+				os=unicos
+				;;
+			crds | unos)
+				basic_machine=m68k-crds
+				os=
+				;;
+			da30)
+				basic_machine=m68k-da30
+				os=
+				;;
+			decstation | pmax | pmin | dec3100 | decstatn)
+				basic_machine=mips-dec
+				os=
+				;;
+			delta88)
+				basic_machine=m88k-motorola
+				os=sysv3
+				;;
+			dicos)
+				basic_machine=i686-pc
+				os=dicos
+				;;
+			djgpp)
+				basic_machine=i586-pc
+				os=msdosdjgpp
+				;;
+			ebmon29k)
+				basic_machine=a29k-amd
+				os=ebmon
+				;;
+			es1800 | OSE68k | ose68k | ose | OSE)
+				basic_machine=m68k-ericsson
+				os=ose
+				;;
+			gmicro)
+				basic_machine=tron-gmicro
+				os=sysv
+				;;
+			go32)
+				basic_machine=i386-pc
+				os=go32
+				;;
+			h8300hms)
+				basic_machine=h8300-hitachi
+				os=hms
+				;;
+			h8300xray)
+				basic_machine=h8300-hitachi
+				os=xray
+				;;
+			h8500hms)
+				basic_machine=h8500-hitachi
+				os=hms
+				;;
+			harris)
+				basic_machine=m88k-harris
+				os=sysv3
+				;;
+			hp300 | hp300hpux)
+				basic_machine=m68k-hp
+				os=hpux
+				;;
+			hp300bsd)
+				basic_machine=m68k-hp
+				os=bsd
+				;;
+			hppaosf)
+				basic_machine=hppa1.1-hp
+				os=osf
+				;;
+			hppro)
+				basic_machine=hppa1.1-hp
+				os=proelf
+				;;
+			i386mach)
+				basic_machine=i386-mach
+				os=mach
+				;;
+			isi68 | isi)
+				basic_machine=m68k-isi
+				os=sysv
+				;;
+			m68knommu)
+				basic_machine=m68k-unknown
+				os=linux
+				;;
+			magnum | m3230)
+				basic_machine=mips-mips
+				os=sysv
+				;;
+			merlin)
+				basic_machine=ns32k-utek
+				os=sysv
+				;;
+			mingw64)
+				basic_machine=x86_64-pc
+				os=mingw64
+				;;
+			mingw32)
+				basic_machine=i686-pc
+				os=mingw32
+				;;
+			mingw32ce)
+				basic_machine=arm-unknown
+				os=mingw32ce
+				;;
+			monitor)
+				basic_machine=m68k-rom68k
+				os=coff
+				;;
+			morphos)
+				basic_machine=powerpc-unknown
+				os=morphos
+				;;
+			moxiebox)
+				basic_machine=moxie-unknown
+				os=moxiebox
+				;;
+			msdos)
+				basic_machine=i386-pc
+				os=msdos
+				;;
+			msys)
+				basic_machine=i686-pc
+				os=msys
+				;;
+			mvs)
+				basic_machine=i370-ibm
+				os=mvs
+				;;
+			nacl)
+				basic_machine=le32-unknown
+				os=nacl
+				;;
+			ncr3000)
+				basic_machine=i486-ncr
+				os=sysv4
+				;;
+			netbsd386)
+				basic_machine=i386-pc
+				os=netbsd
+				;;
+			netwinder)
+				basic_machine=armv4l-rebel
+				os=linux
+				;;
+			news | news700 | news800 | news900)
+				basic_machine=m68k-sony
+				os=newsos
+				;;
+			news1000)
+				basic_machine=m68030-sony
+				os=newsos
+				;;
+			necv70)
+				basic_machine=v70-nec
+				os=sysv
+				;;
+			nh3000)
+				basic_machine=m68k-harris
+				os=cxux
+				;;
+			nh[45]000)
+				basic_machine=m88k-harris
+				os=cxux
+				;;
+			nindy960)
+				basic_machine=i960-intel
+				os=nindy
+				;;
+			mon960)
+				basic_machine=i960-intel
+				os=mon960
+				;;
+			nonstopux)
+				basic_machine=mips-compaq
+				os=nonstopux
+				;;
+			os400)
+				basic_machine=powerpc-ibm
+				os=os400
+				;;
+			OSE68000 | ose68000)
+				basic_machine=m68000-ericsson
+				os=ose
+				;;
+			os68k)
+				basic_machine=m68k-none
+				os=os68k
+				;;
+			paragon)
+				basic_machine=i860-intel
+				os=osf
+				;;
+			parisc)
+				basic_machine=hppa-unknown
+				os=linux
+				;;
+			pw32)
+				basic_machine=i586-unknown
+				os=pw32
+				;;
+			rdos | rdos64)
+				basic_machine=x86_64-pc
+				os=rdos
+				;;
+			rdos32)
+				basic_machine=i386-pc
+				os=rdos
+				;;
+			rom68k)
+				basic_machine=m68k-rom68k
+				os=coff
+				;;
+			sa29200)
+				basic_machine=a29k-amd
+				os=udi
+				;;
+			sei)
+				basic_machine=mips-sei
+				os=seiux
+				;;
+			sequent)
+				basic_machine=i386-sequent
+				os=
+				;;
+			sps7)
+				basic_machine=m68k-bull
+				os=sysv2
+				;;
+			st2000)
+				basic_machine=m68k-tandem
+				os=
+				;;
+			stratus)
+				basic_machine=i860-stratus
+				os=sysv4
+				;;
+			sun2)
+				basic_machine=m68000-sun
+				os=
+				;;
+			sun2os3)
+				basic_machine=m68000-sun
+				os=sunos3
+				;;
+			sun2os4)
+				basic_machine=m68000-sun
+				os=sunos4
+				;;
+			sun3)
+				basic_machine=m68k-sun
+				os=
+				;;
+			sun3os3)
+				basic_machine=m68k-sun
+				os=sunos3
+				;;
+			sun3os4)
+				basic_machine=m68k-sun
+				os=sunos4
+				;;
+			sun4)
+				basic_machine=sparc-sun
+				os=
+				;;
+			sun4os3)
+				basic_machine=sparc-sun
+				os=sunos3
+				;;
+			sun4os4)
+				basic_machine=sparc-sun
+				os=sunos4
+				;;
+			sun4sol2)
+				basic_machine=sparc-sun
+				os=solaris2
+				;;
+			sun386 | sun386i | roadrunner)
+				basic_machine=i386-sun
+				os=
+				;;
+			sv1)
+				basic_machine=sv1-cray
+				os=unicos
+				;;
+			symmetry)
+				basic_machine=i386-sequent
+				os=dynix
+				;;
+			t3e)
+				basic_machine=alphaev5-cray
+				os=unicos
+				;;
+			t90)
+				basic_machine=t90-cray
+				os=unicos
+				;;
+			toad1)
+				basic_machine=pdp10-xkl
+				os=tops20
+				;;
+			tpf)
+				basic_machine=s390x-ibm
+				os=tpf
+				;;
+			udi29k)
+				basic_machine=a29k-amd
+				os=udi
+				;;
+			ultra3)
+				basic_machine=a29k-nyu
+				os=sym1
+				;;
+			v810 | necv810)
+				basic_machine=v810-nec
+				os=none
+				;;
+			vaxv)
+				basic_machine=vax-dec
+				os=sysv
+				;;
+			vms)
+				basic_machine=vax-dec
+				os=vms
+				;;
+			vsta)
+				basic_machine=i386-pc
+				os=vsta
+				;;
+			vxworks960)
+				basic_machine=i960-wrs
+				os=vxworks
+				;;
+			vxworks68)
+				basic_machine=m68k-wrs
+				os=vxworks
+				;;
+			vxworks29k)
+				basic_machine=a29k-wrs
+				os=vxworks
+				;;
+			xbox)
+				basic_machine=i686-pc
+				os=mingw32
+				;;
+			ymp)
+				basic_machine=ymp-cray
+				os=unicos
+				;;
+			*)
+				basic_machine=$1
+				os=
+				;;
+		esac
+		;;
+esac
+
+# Decode 1-component or ad-hoc basic machines
+case $basic_machine in
+	# Here we handle the default manufacturer of certain CPU types.  It is in
+	# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		cpu=hppa1.1
+		vendor=winbond
+		;;
+	op50n)
+		cpu=hppa1.1
+		vendor=oki
+		;;
+	op60c)
+		cpu=hppa1.1
+		vendor=oki
+		;;
+	ibm*)
+		cpu=i370
+		vendor=ibm
+		;;
+	orion105)
+		cpu=clipper
+		vendor=highlevel
+		;;
+	mac | mpw | mac-mpw)
+		cpu=m68k
+		vendor=apple
+		;;
+	pmac | pmac-mpw)
+		cpu=powerpc
+		vendor=apple
+		;;
+
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		cpu=m68000
+		vendor=att
+		;;
+	3b*)
+		cpu=we32k
+		vendor=att
+		;;
+	bluegene*)
+		cpu=powerpc
+		vendor=ibm
+		os=cnk
+		;;
+	decsystem10* | dec10*)
+		cpu=pdp10
+		vendor=dec
+		os=tops10
+		;;
+	decsystem20* | dec20*)
+		cpu=pdp10
+		vendor=dec
+		os=tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		cpu=m68k
+		vendor=motorola
+		;;
+	dpx2*)
+		cpu=m68k
+		vendor=bull
+		os=sysv3
+		;;
+	encore | umax | mmax)
+		cpu=ns32k
+		vendor=encore
+		;;
+	elxsi)
+		cpu=elxsi
+		vendor=elxsi
+		os=${os:-bsd}
+		;;
+	fx2800)
+		cpu=i860
+		vendor=alliant
+		;;
+	genix)
+		cpu=ns32k
+		vendor=ns
+		;;
+	h3050r* | hiux*)
+		cpu=hppa1.1
+		vendor=hitachi
+		os=hiuxwe2
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		cpu=hppa1.0
+		vendor=hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		cpu=m68000
+		vendor=hp
+		;;
+	hp9k3[2-9][0-9])
+		cpu=m68k
+		vendor=hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		cpu=hppa1.0
+		vendor=hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		cpu=hppa1.1
+		vendor=hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		cpu=hppa1.1
+		vendor=hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		cpu=hppa1.1
+		vendor=hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		cpu=hppa1.1
+		vendor=hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		cpu=hppa1.0
+		vendor=hp
+		;;
+	i*86v32)
+		cpu=`echo "$1" | sed -e 's/86.*/86/'`
+		vendor=pc
+		os=sysv32
+		;;
+	i*86v4*)
+		cpu=`echo "$1" | sed -e 's/86.*/86/'`
+		vendor=pc
+		os=sysv4
+		;;
+	i*86v)
+		cpu=`echo "$1" | sed -e 's/86.*/86/'`
+		vendor=pc
+		os=sysv
+		;;
+	i*86sol2)
+		cpu=`echo "$1" | sed -e 's/86.*/86/'`
+		vendor=pc
+		os=solaris2
+		;;
+	j90 | j90-cray)
+		cpu=j90
+		vendor=cray
+		os=${os:-unicos}
+		;;
+	iris | iris4d)
+		cpu=mips
+		vendor=sgi
+		case $os in
+		    irix*)
+			;;
+		    *)
+			os=irix4
+			;;
+		esac
+		;;
+	miniframe)
+		cpu=m68000
+		vendor=convergent
+		;;
+	*mint | mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		cpu=m68k
+		vendor=atari
+		os=mint
+		;;
+	news-3600 | risc-news)
+		cpu=mips
+		vendor=sony
+		os=newsos
+		;;
+	next | m*-next)
+		cpu=m68k
+		vendor=next
+		case $os in
+		    openstep*)
+		        ;;
+		    nextstep*)
+			;;
+		    ns2*)
+		      os=nextstep2
+			;;
+		    *)
+		      os=nextstep3
+			;;
+		esac
+		;;
+	np1)
+		cpu=np1
+		vendor=gould
+		;;
+	op50n-* | op60c-*)
+		cpu=hppa1.1
+		vendor=oki
+		os=proelf
+		;;
+	pa-hitachi)
+		cpu=hppa1.1
+		vendor=hitachi
+		os=hiuxwe2
+		;;
+	pbd)
+		cpu=sparc
+		vendor=tti
+		;;
+	pbb)
+		cpu=m68k
+		vendor=tti
+		;;
+	pc532)
+		cpu=ns32k
+		vendor=pc532
+		;;
+	pn)
+		cpu=pn
+		vendor=gould
+		;;
+	power)
+		cpu=power
+		vendor=ibm
+		;;
+	ps2)
+		cpu=i386
+		vendor=ibm
+		;;
+	rm[46]00)
+		cpu=mips
+		vendor=siemens
+		;;
+	rtpc | rtpc-*)
+		cpu=romp
+		vendor=ibm
+		;;
+	sde)
+		cpu=mipsisa32
+		vendor=sde
+		os=${os:-elf}
+		;;
+	simso-wrs)
+		cpu=sparclite
+		vendor=wrs
+		os=vxworks
+		;;
+	tower | tower-32)
+		cpu=m68k
+		vendor=ncr
+		;;
+	vpp*|vx|vx-*)
+		cpu=f301
+		vendor=fujitsu
+		;;
+	w65)
+		cpu=w65
+		vendor=wdc
+		;;
+	w89k-*)
+		cpu=hppa1.1
+		vendor=winbond
+		os=proelf
+		;;
+	none)
+		cpu=none
+		vendor=none
+		;;
+	leon|leon[3-9])
+		cpu=sparc
+		vendor=$basic_machine
+		;;
+	leon-*|leon[3-9]-*)
+		cpu=sparc
+		vendor=`echo "$basic_machine" | sed 's/-.*//'`
+		;;
+
+	*-*)
+		# shellcheck disable=SC2162
+		IFS="-" read cpu vendor <<EOF
+$basic_machine
+EOF
+		;;
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+		cpu=$basic_machine
+		vendor=pc
+		;;
+	# These rules are duplicated from below for sake of the special case above;
+	# i.e. things that normalized to x86 arches should also default to "pc"
+	pc98)
+		cpu=i386
+		vendor=pc
+		;;
+	x64 | amd64)
+		cpu=x86_64
+		vendor=pc
+		;;
+	# Recognize the basic CPU types without company name.
+	*)
+		cpu=$basic_machine
+		vendor=unknown
+		;;
+esac
+
+unset -v basic_machine
+
+# Decode basic machines in the full and proper CPU-Company form.
+case $cpu-$vendor in
+	# Here we handle the default manufacturer of certain CPU types in canonical form. It is in
+	# some cases the only manufacturer, in others, it is the most popular.
+	craynv-unknown)
+		vendor=cray
+		os=${os:-unicosmp}
+		;;
+	c90-unknown | c90-cray)
+		vendor=cray
+		os=${os:-unicos}
+		;;
+	fx80-unknown)
+		vendor=alliant
+		;;
+	romp-unknown)
+		vendor=ibm
+		;;
+	mmix-unknown)
+		vendor=knuth
+		;;
+	microblaze-unknown | microblazeel-unknown)
+		vendor=xilinx
+		;;
+	rs6000-unknown)
+		vendor=ibm
+		;;
+	vax-unknown)
+		vendor=dec
+		;;
+	pdp11-unknown)
+		vendor=dec
+		;;
+	we32k-unknown)
+		vendor=att
+		;;
+	cydra-unknown)
+		vendor=cydrome
+		;;
+	i370-ibm*)
+		vendor=ibm
+		;;
+	orion-unknown)
+		vendor=highlevel
+		;;
+	xps-unknown | xps100-unknown)
+		cpu=xps100
+		vendor=honeywell
+		;;
+
+	# Here we normalize CPU types with a missing or matching vendor
+	dpx20-unknown | dpx20-bull)
+		cpu=rs6000
+		vendor=bull
+		os=${os:-bosx}
+		;;
+
+	# Here we normalize CPU types irrespective of the vendor
+	amd64-*)
+		cpu=x86_64
+		;;
+	blackfin-*)
+		cpu=bfin
+		os=linux
+		;;
+	c54x-*)
+		cpu=tic54x
+		;;
+	c55x-*)
+		cpu=tic55x
+		;;
+	c6x-*)
+		cpu=tic6x
+		;;
+	e500v[12]-*)
+		cpu=powerpc
+		os=$os"spe"
+		;;
+	mips3*-*)
+		cpu=mips64
+		;;
+	ms1-*)
+		cpu=mt
+		;;
+	m68knommu-*)
+		cpu=m68k
+		os=linux
+		;;
+	m9s12z-* | m68hcs12z-* | hcs12z-* | s12z-*)
+		cpu=s12z
+		;;
+	openrisc-*)
+		cpu=or32
+		;;
+	parisc-*)
+		cpu=hppa
+		os=linux
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		cpu=i586
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-* | athalon_*-*)
+		cpu=i686
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		cpu=i686
+		;;
+	pentium4-*)
+		cpu=i786
+		;;
+	pc98-*)
+		cpu=i386
+		;;
+	ppc-* | ppcbe-*)
+		cpu=powerpc
+		;;
+	ppcle-* | powerpclittle-*)
+		cpu=powerpcle
+		;;
+	ppc64-*)
+		cpu=powerpc64
+		;;
+	ppc64le-* | powerpc64little-*)
+		cpu=powerpc64le
+		;;
+	sb1-*)
+		cpu=mipsisa64sb1
+		;;
+	sb1el-*)
+		cpu=mipsisa64sb1el
+		;;
+	sh5e[lb]-*)
+		cpu=`echo "$cpu" | sed 's/^\(sh.\)e\(.\)$/\1\2e/'`
+		;;
+	spur-*)
+		cpu=spur
+		;;
+	strongarm-* | thumb-*)
+		cpu=arm
+		;;
+	tx39-*)
+		cpu=mipstx39
+		;;
+	tx39el-*)
+		cpu=mipstx39el
+		;;
+	x64-*)
+		cpu=x86_64
+		;;
+	xscale-* | xscalee[bl]-*)
+		cpu=`echo "$cpu" | sed 's/^xscale/arm/'`
+		;;
+
+	# Recognize the canonical CPU Types that limit and/or modify the
+	# company names they are paired with.
+	cr16-*)
+		os=${os:-elf}
+		;;
+	crisv32-* | etraxfs*-*)
+		cpu=crisv32
+		vendor=axis
+		;;
+	cris-* | etrax*-*)
+		cpu=cris
+		vendor=axis
+		;;
+	crx-*)
+		os=${os:-elf}
+		;;
+	neo-tandem)
+		cpu=neo
+		vendor=tandem
+		;;
+	nse-tandem)
+		cpu=nse
+		vendor=tandem
+		;;
+	nsr-tandem)
+		cpu=nsr
+		vendor=tandem
+		;;
+	nsv-tandem)
+		cpu=nsv
+		vendor=tandem
+		;;
+	nsx-tandem)
+		cpu=nsx
+		vendor=tandem
+		;;
+	s390-*)
+		cpu=s390
+		vendor=ibm
+		;;
+	s390x-*)
+		cpu=s390x
+		vendor=ibm
+		;;
+	tile*-*)
+		os=${os:-linux-gnu}
+		;;
+
+	*)
+		# Recognize the canonical CPU types that are allowed with any
+		# company name.
+		case $cpu in
+			1750a | 580 \
+			| a29k \
+			| aarch64 | aarch64_be \
+			| abacus \
+			| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] \
+			| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] \
+			| alphapca5[67] | alpha64pca5[67] \
+			| am33_2.0 \
+			| amdgcn \
+			| arc | arceb \
+			| arm  | arm[lb]e | arme[lb] | armv* \
+			| avr | avr32 \
+			| asmjs \
+			| ba \
+			| be32 | be64 \
+			| bfin | bpf | bs2000 \
+			| c[123]* | c30 | [cjt]90 | c4x \
+			| c8051 | clipper | craynv | csky | cydra \
+			| d10v | d30v | dlx | dsp16xx \
+			| e2k | elxsi | epiphany \
+			| f30[01] | f700 | fido | fr30 | frv | ft32 | fx80 \
+			| h8300 | h8500 \
+			| hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+			| hexagon \
+			| i370 | i*86 | i860 | i960 | ia16 | ia64 \
+			| ip2k | iq2000 \
+			| k1om \
+			| le32 | le64 \
+			| lm32 \
+			| m32c | m32r | m32rle \
+			| m5200 | m68000 | m680[012346]0 | m68360 | m683?2 | m68k \
+			| m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x \
+			| m88110 | m88k | maxq | mb | mcore | mep | metag \
+			| microblaze | microblazeel \
+			| mips | mipsbe | mipseb | mipsel | mipsle \
+			| mips16 \
+			| mips64 | mips64eb | mips64el \
+			| mips64octeon | mips64octeonel \
+			| mips64orion | mips64orionel \
+			| mips64r5900 | mips64r5900el \
+			| mips64vr | mips64vrel \
+			| mips64vr4100 | mips64vr4100el \
+			| mips64vr4300 | mips64vr4300el \
+			| mips64vr5000 | mips64vr5000el \
+			| mips64vr5900 | mips64vr5900el \
+			| mipsisa32 | mipsisa32el \
+			| mipsisa32r2 | mipsisa32r2el \
+			| mipsisa32r6 | mipsisa32r6el \
+			| mipsisa64 | mipsisa64el \
+			| mipsisa64r2 | mipsisa64r2el \
+			| mipsisa64r6 | mipsisa64r6el \
+			| mipsisa64sb1 | mipsisa64sb1el \
+			| mipsisa64sr71k | mipsisa64sr71kel \
+			| mipsr5900 | mipsr5900el \
+			| mipstx39 | mipstx39el \
+			| mmix \
+			| mn10200 | mn10300 \
+			| moxie \
+			| mt \
+			| msp430 \
+			| nds32 | nds32le | nds32be \
+			| nfp \
+			| nios | nios2 | nios2eb | nios2el \
+			| none | np1 | ns16k | ns32k | nvptx \
+			| open8 \
+			| or1k* \
+			| or32 \
+			| orion \
+			| picochip \
+			| pdp10 | pdp11 | pj | pjl | pn | power \
+			| powerpc | powerpc64 | powerpc64le | powerpcle | powerpcspe \
+			| pru \
+			| pyramid \
+			| riscv | riscv32 | riscv64 \
+			| rl78 | romp | rs6000 | rx \
+			| score \
+			| sh | shl \
+			| sh[1234] | sh[24]a | sh[24]ae[lb] | sh[23]e | she[lb] | sh[lb]e \
+			| sh[1234]e[lb] |  sh[12345][lb]e | sh[23]ele | sh64 | sh64le \
+			| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet \
+			| sparclite \
+			| sparcv8 | sparcv9 | sparcv9b | sparcv9v | sv1 | sx* \
+			| spu \
+			| tahoe \
+			| tic30 | tic4x | tic54x | tic55x | tic6x | tic80 \
+			| tron \
+			| ubicom32 \
+			| v70 | v850 | v850e | v850e1 | v850es | v850e2 | v850e2v3 \
+			| vax \
+			| visium \
+			| w65 \
+			| wasm32 | wasm64 \
+			| we32k \
+			| x86 | x86_64 | xc16x | xgate | xps100 \
+			| xstormy16 | xtensa* \
+			| ymp \
+			| z8k | z80)
+				;;
+
+			*)
+				echo Invalid configuration \`"$1"\': machine \`"$cpu-$vendor"\' not recognized 1>&2
+				exit 1
+				;;
+		esac
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $vendor in
+	digital*)
+		vendor=dec
+		;;
+	commodore*)
+		vendor=cbm
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x$os != x ]
+then
+case $os in
+	# First match some system type aliases that might get confused
+	# with valid system types.
+	# solaris* is a basic system type, with this one exception.
+	auroraux)
+		os=auroraux
+		;;
+	bluegene*)
+		os=cnk
+		;;
+	solaris1 | solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	solaris)
+		os=solaris2
+		;;
+	unixware*)
+		os=sysv4.2uw
+		;;
+	gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# es1800 is here to avoid being matched by es* (a different OS)
+	es1800*)
+		os=ose
+		;;
+	# Some version numbers need modification
+	chorusos*)
+		os=chorusos
+		;;
+	isc)
+		os=isc2.2
+		;;
+	sco6)
+		os=sco5v6
+		;;
+	sco5)
+		os=sco3.2v5
+		;;
+	sco4)
+		os=sco3.2v4
+		;;
+	sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		;;
+	sco3.2v[4-9]* | sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		;;
+	scout)
+		# Don't match below
+		;;
+	sco*)
+		os=sco3.2v2
+		;;
+	psos*)
+		os=psos
+		;;
+	# Now accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST end in a * to match a version number.
+	# sysv* is not here because it comes later, after sysvr4.
+	gnu* | bsd* | mach* | minix* | genix* | ultrix* | irix* \
+	     | *vms* | esix* | aix* | cnk* | sunos | sunos[34]*\
+	     | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \
+	     | sym* | kopensolaris* | plan9* \
+	     | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \
+	     | aos* | aros* | cloudabi* | sortix* | twizzler* \
+	     | nindy* | vxsim* | vxworks* | ebmon* | hms* | mvs* \
+	     | clix* | riscos* | uniplus* | iris* | isc* | rtu* | xenix* \
+	     | knetbsd* | mirbsd* | netbsd* \
+	     | bitrig* | openbsd* | solidbsd* | libertybsd* | os108* \
+	     | ekkobsd* | kfreebsd* | freebsd* | riscix* | lynxos* \
+	     | bosx* | nextstep* | cxux* | aout* | elf* | oabi* \
+	     | ptx* | coff* | ecoff* | winnt* | domain* | vsta* \
+	     | udi* | eabi* | lites* | ieee* | go32* | aux* | hcos* \
+	     | chorusrdb* | cegcc* | glidix* \
+	     | cygwin* | msys* | pe* | moss* | proelf* | rtems* \
+	     | midipix* | mingw32* | mingw64* | linux-gnu* | linux-android* \
+	     | linux-newlib* | linux-musl* | linux-uclibc* \
+	     | uxpv* | beos* | mpeix* | udk* | moxiebox* \
+	     | interix* | uwin* | mks* | rhapsody* | darwin* \
+	     | openstep* | oskit* | conix* | pw32* | nonstopux* \
+	     | storm-chaos* | tops10* | tenex* | tops20* | its* \
+	     | os2* | vos* | palmos* | uclinux* | nucleus* \
+	     | morphos* | superux* | rtmk* | windiss* \
+	     | powermax* | dnix* | nx6 | nx7 | sei* | dragonfly* \
+	     | skyos* | haiku* | rdos* | toppers* | drops* | es* \
+	     | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \
+	     | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi* \
+	     | nsk* | powerunix)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	qnx*)
+		case $cpu in
+		    x86 | i*86)
+			;;
+		    *)
+			os=nto-$os
+			;;
+		esac
+		;;
+	hiux*)
+		os=hiuxwe2
+		;;
+	nto-qnx*)
+		;;
+	nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	sim | xray | os68k* | v88r* \
+	    | windows* | osx | abug | netware* | os9* \
+	    | macos* | mpw* | magic* | mmixware* | mon960* | lnews*)
+		;;
+	linux-dietlibc)
+		os=linux-dietlibc
+		;;
+	linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	lynx*178)
+		os=lynxos178
+		;;
+	lynx*5)
+		os=lynxos5
+		;;
+	lynx*)
+		os=lynxos
+		;;
+	mac*)
+		os=`echo "$os" | sed -e 's|mac|macos|'`
+		;;
+	opened*)
+		os=openedition
+		;;
+	os400*)
+		os=os400
+		;;
+	sunos5*)
+		os=`echo "$os" | sed -e 's|sunos5|solaris2|'`
+		;;
+	sunos6*)
+		os=`echo "$os" | sed -e 's|sunos6|solaris3|'`
+		;;
+	wince*)
+		os=wince
+		;;
+	utek*)
+		os=bsd
+		;;
+	dynix*)
+		os=bsd
+		;;
+	acis*)
+		os=aos
+		;;
+	atheos*)
+		os=atheos
+		;;
+	syllable*)
+		os=syllable
+		;;
+	386bsd)
+		os=bsd
+		;;
+	ctix* | uts*)
+		os=sysv
+		;;
+	nova*)
+		os=rtmk-nova
+		;;
+	ns2)
+		os=nextstep2
+		;;
+	# Preserve the version number of sinix5.
+	sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	sinix*)
+		os=sysv4
+		;;
+	tpf*)
+		os=tpf
+		;;
+	triton*)
+		os=sysv3
+		;;
+	oss*)
+		os=sysv3
+		;;
+	svr4*)
+		os=sysv4
+		;;
+	svr3)
+		os=sysv3
+		;;
+	sysvr4)
+		os=sysv4
+		;;
+	# This must come after sysvr4.
+	sysv*)
+		;;
+	ose*)
+		os=ose
+		;;
+	*mint | mint[0-9]* | *MiNT | MiNT[0-9]*)
+		os=mint
+		;;
+	zvmoe)
+		os=zvmoe
+		;;
+	dicos*)
+		os=dicos
+		;;
+	pikeos*)
+		# Until real need of OS specific support for
+		# particular features comes up, bare metal
+		# configurations are quite functional.
+		case $cpu in
+		    arm*)
+			os=eabi
+			;;
+		    *)
+			os=elf
+			;;
+		esac
+		;;
+	nacl*)
+		;;
+	ios)
+		;;
+	none)
+		;;
+	*-eabi)
+		;;
+	*)
+		echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $cpu-$vendor in
+	score-*)
+		os=elf
+		;;
+	spu-*)
+		os=elf
+		;;
+	*-acorn)
+		os=riscix1.2
+		;;
+	arm*-rebel)
+		os=linux
+		;;
+	arm*-semi)
+		os=aout
+		;;
+	c4x-* | tic4x-*)
+		os=coff
+		;;
+	c8051-*)
+		os=elf
+		;;
+	clipper-intergraph)
+		os=clix
+		;;
+	hexagon-*)
+		os=elf
+		;;
+	tic54x-*)
+		os=coff
+		;;
+	tic55x-*)
+		os=coff
+		;;
+	tic6x-*)
+		os=coff
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=tops20
+		;;
+	pdp11-*)
+		os=none
+		;;
+	*-dec | vax-*)
+		os=ultrix4.2
+		;;
+	m68*-apollo)
+		os=domain
+		;;
+	i386-sun)
+		os=sunos4.0.2
+		;;
+	m68000-sun)
+		os=sunos3
+		;;
+	m68*-cisco)
+		os=aout
+		;;
+	mep-*)
+		os=elf
+		;;
+	mips*-cisco)
+		os=elf
+		;;
+	mips*-*)
+		os=elf
+		;;
+	or32-*)
+		os=coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=sysv3
+		;;
+	sparc-* | *-sun)
+		os=sunos4.1.1
+		;;
+	pru-*)
+		os=elf
+		;;
+	*-be)
+		os=beos
+		;;
+	*-ibm)
+		os=aix
+		;;
+	*-knuth)
+		os=mmixware
+		;;
+	*-wec)
+		os=proelf
+		;;
+	*-winbond)
+		os=proelf
+		;;
+	*-oki)
+		os=proelf
+		;;
+	*-hp)
+		os=hpux
+		;;
+	*-hitachi)
+		os=hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=sysv
+		;;
+	*-cbm)
+		os=amigaos
+		;;
+	*-dg)
+		os=dgux
+		;;
+	*-dolphin)
+		os=sysv3
+		;;
+	m68k-ccur)
+		os=rtu
+		;;
+	m88k-omron*)
+		os=luna
+		;;
+	*-next)
+		os=nextstep
+		;;
+	*-sequent)
+		os=ptx
+		;;
+	*-crds)
+		os=unos
+		;;
+	*-ns)
+		os=genix
+		;;
+	i370-*)
+		os=mvs
+		;;
+	*-gould)
+		os=sysv
+		;;
+	*-highlevel)
+		os=bsd
+		;;
+	*-encore)
+		os=bsd
+		;;
+	*-sgi)
+		os=irix
+		;;
+	*-siemens)
+		os=sysv4
+		;;
+	*-masscomp)
+		os=rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=uxpv
+		;;
+	*-rom68k)
+		os=coff
+		;;
+	*-*bug)
+		os=coff
+		;;
+	*-apple)
+		os=macos
+		;;
+	*-atari*)
+		os=mint
+		;;
+	*-wrs)
+		os=vxworks
+		;;
+	*)
+		os=none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+case $vendor in
+	unknown)
+		case $os in
+			riscix*)
+				vendor=acorn
+				;;
+			sunos*)
+				vendor=sun
+				;;
+			cnk*|-aix*)
+				vendor=ibm
+				;;
+			beos*)
+				vendor=be
+				;;
+			hpux*)
+				vendor=hp
+				;;
+			mpeix*)
+				vendor=hp
+				;;
+			hiux*)
+				vendor=hitachi
+				;;
+			unos*)
+				vendor=crds
+				;;
+			dgux*)
+				vendor=dg
+				;;
+			luna*)
+				vendor=omron
+				;;
+			genix*)
+				vendor=ns
+				;;
+			clix*)
+				vendor=intergraph
+				;;
+			mvs* | opened*)
+				vendor=ibm
+				;;
+			os400*)
+				vendor=ibm
+				;;
+			ptx*)
+				vendor=sequent
+				;;
+			tpf*)
+				vendor=ibm
+				;;
+			vxsim* | vxworks* | windiss*)
+				vendor=wrs
+				;;
+			aux*)
+				vendor=apple
+				;;
+			hms*)
+				vendor=hitachi
+				;;
+			mpw* | macos*)
+				vendor=apple
+				;;
+			*mint | mint[0-9]* | *MiNT | MiNT[0-9]*)
+				vendor=atari
+				;;
+			vos*)
+				vendor=stratus
+				;;
+		esac
+		;;
+esac
+
+echo "$cpu-$vendor-$os"
+exit
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/build-aux/depcomp b/build-aux/depcomp
new file mode 100755
index 0000000000..3f273877f9
--- /dev/null
+++ b/build-aux/depcomp
@@ -0,0 +1,791 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 1999-2019 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by 'PROGRAMS ARGS'.
+  object      Object file output by 'PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputting dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+## Some versions of gcc put a space before the ':'.  On the theory
+## that the space means something, we add a space to the output as
+## well.  hp depmode also adds that space, but also prefixes the VPATH
+## to the object.  Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like '#:fec' to the end of the
+    # dependency line.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
+    echo >> "$depfile"
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts '$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  set_dir_from "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  aix_post_process_depfile
+  ;;
+
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using '\' :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  set_dir_from  "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add 'dependent.h:' lines.
+    sed -ne '2,${
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
+
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
+
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
+
+msvc7)
+  if test "$libtool" = yes; then
+    showIncludes=-Wc,-showIncludes
+  else
+    showIncludes=-showIncludes
+  fi
+  "$@" $showIncludes > "$tmpdepfile"
+  stat=$?
+  grep -v '^Note: including file: ' "$tmpdepfile"
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The first sed program below extracts the file names and escapes
+  # backslashes for cygpath.  The second sed program outputs the file
+  # name when reading, but also accumulates all include files in the
+  # hold buffer in order to output them again at the end.  This only
+  # works with sed implementations that can handle large buffers.
+  sed < "$tmpdepfile" -n '
+/^Note: including file:  *\(.*\)/ {
+  s//\1/
+  s/\\/\\\\/g
+  p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+  s/.*/'"$tab"'/
+  G
+  p
+}' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+  rm -f "$tmpdepfile"
+  ;;
+
+msvc7msys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for ':'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+  "$@" $dashmflag |
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no eat=no
+  for arg
+  do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  # makedepend may prepend the VPATH from the source file name to the object.
+  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+        set fnord "$@"
+        shift
+        shift
+        ;;
+    *)
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
+    esac
+  done
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  echo "$tab" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build-aux/install-sh b/build-aux/install-sh
new file mode 100755
index 0000000000..20d8b2eaea
--- /dev/null
+++ b/build-aux/install-sh
@@ -0,0 +1,529 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2018-03-11.20; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+tab='	'
+nl='
+'
+IFS=" $tab$nl"
+
+# Set DOITPROG to "echo" to test this script.
+
+doit=${DOITPROG-}
+doit_exec=${doit:-exec}
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+is_target_a_directory=possibly
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;
+
+    -o) chowncmd="$chownprog $2"
+        shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t)
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | [=\(\)!]) dst_arg=./$dst_arg;;
+        esac
+        shift;;
+
+    -T) is_target_a_directory=never;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --) shift
+        break;;
+
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call 'install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for 'test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename.
+    if test -d "$dst"; then
+      if test "$is_target_a_directory" = never; then
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
+      fi
+      dstdir=$dst
+      dstbase=`basename "$src"`
+      case $dst in
+	*/) dst=$dst$dstbase;;
+	*)  dst=$dst/$dstbase;;
+      esac
+      dstdir_status=0
+    else
+      dstdir=`dirname "$dst"`
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  case $dstdir in
+    */) dstdirslash=$dstdir;;
+    *)  dstdirslash=$dstdir/;;
+  esac
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+        # Create intermediate dirs using mode 755 as modified by the umask.
+        # This is like FreeBSD 'install' as of 1997-10-28.
+        umask=`umask`
+        case $stripcmd.$umask in
+          # Optimize common cases.
+          *[2367][2367]) mkdir_umask=$umask;;
+          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+          *[0-7])
+            mkdir_umask=`expr $umask + 22 \
+              - $umask % 100 % 40 + $umask % 20 \
+              - $umask % 10 % 4 + $umask % 2
+            `;;
+          *) mkdir_umask=$umask,go-w;;
+        esac
+
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi
+
+        posix_mkdir=false
+        case $umask in
+          *[123567][0-7][0-7])
+            # POSIX mkdir -p sets u+wx bits regardless of umask, which
+            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+            ;;
+          *)
+            # Note that $RANDOM variable is not portable (e.g. dash);  Use it
+            # here however when possible just to lower collision chance.
+            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+
+            trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+            # Because "mkdir -p" follows existing symlinks and we likely work
+            # directly in world-writeable /tmp, make sure that the '$tmpdir'
+            # directory is successfully created first before we actually test
+            # 'mkdir -p' feature.
+            if (umask $mkdir_umask &&
+                $mkdirprog $mkdir_mode "$tmpdir" &&
+                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+            then
+              if test -z "$dir_arg" || {
+                   # Check for POSIX incompatibilities with -m.
+                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+                   # other-writable bit of parent directory when it shouldn't.
+                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+                   test_tmpdir="$tmpdir/a"
+                   ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+                   case $ls_ld_tmpdir in
+                     d????-?r-*) different_mode=700;;
+                     d????-?--*) different_mode=755;;
+                     *) false;;
+                   esac &&
+                   $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+                     ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+                   }
+                 }
+              then posix_mkdir=:
+              fi
+              rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
+            else
+              # Remove any dirs left behind by ancient mkdir implementations.
+              rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
+            fi
+            trap '' 0;;
+        esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+        /*) prefix='/';;
+        [-=\(\)!]*) prefix='./';;
+        *)  prefix='';;
+      esac
+
+      oIFS=$IFS
+      IFS=/
+      set -f
+      set fnord $dstdir
+      shift
+      set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+        test X"$d" = X && continue
+
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask=$mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=${dstdirslash}_inst.$$_
+    rmtmp=${dstdirslash}_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask &&
+     { test -z "$stripcmd" || {
+	 # Create $dsttmp read-write so that cp doesn't create it read-only,
+	 # which would cause strip to fail.
+	 if test -z "$doit"; then
+	   : >"$dsttmp" # No need to fork-exec 'touch'.
+	 else
+	   $doit touch "$dsttmp"
+	 fi
+       }
+     } &&
+     $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
+       set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       set +f &&
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd -f "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&
+
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build-aux/ltmain.sh b/build-aux/ltmain.sh
new file mode 100644
index 0000000000..7f3523d335
--- /dev/null
+++ b/build-aux/ltmain.sh
@@ -0,0 +1,11149 @@
+#! /bin/sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+##               by inline-source v2014-01-03.01
+
+# libtool (GNU libtool) 2.4.6
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.6
+package_revision=2.4.6
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2015-01-20.17; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# Copyright (C) 2004-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# As a special exception to the GNU General Public License, if you distribute
+# this file as part of a program or library that is built using GNU Libtool,
+# you may include this file under the same distribution terms that you use
+# for the rest of that program.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+#   . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
+fi
+
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test set = \"\${$_G_var+set}\"; then
+          save_$_G_var=\$$_G_var
+          $_G_var=C
+	  export $_G_var
+	  _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+	  _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
+	fi"
+done
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp	$nl"
+
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
+
+
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+    test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+    _G_progs_list=$1
+    _G_check_func=$2
+    _G_PATH=${3-"$PATH"}
+
+    _G_path_prog_max=0
+    _G_path_prog_found=false
+    _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+    for _G_dir in $_G_PATH; do
+      IFS=$_G_save_IFS
+      test -z "$_G_dir" && _G_dir=.
+      for _G_prog_name in $_G_progs_list; do
+        for _exeext in '' .EXE; do
+          _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+          func_executable_p "$_G_path_prog" || continue
+          case `"$_G_path_prog" --version 2>&1` in
+            *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+            *)     $_G_check_func $_G_path_prog
+		   func_path_progs_result=$func_check_prog_result
+		   ;;
+          esac
+          $_G_path_prog_found && break 3
+        done
+      done
+    done
+    IFS=$_G_save_IFS
+    test -z "$func_path_progs_result" && {
+      echo "no acceptable sed could be found in \$PATH" >&2
+      exit 1
+    }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+  _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+  for _G_i in 1 2 3 4 5 6 7; do
+    _G_sed_script=$_G_sed_script$nl$_G_sed_script
+  done
+  echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+  _G_sed_script=
+
+  func_check_prog_sed ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo '' >> conftest.nl
+      "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+  rm -f conftest.sed
+  SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+  func_check_prog_grep ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    _G_path_prog_max=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo 'GREP' >> conftest.nl
+      "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+  GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables.  These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
+
+: ${CP="cp -f"}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+
+
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
+
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
+
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same.  If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion.  Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'.  '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+  s/$_G_bs4/&\\
+/g
+  s/^$_G_bs2$_G_dollar/$_G_bs&/
+  s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+  s/\n//g"
+
+
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
+
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
+
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+#    debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
+
+# By convention, finish your script with:
+#
+#    exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath=$0
+
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
+
+# Make sure we have an absolute progpath for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
+     progdir=`cd "$progdir" && pwd`
+     progpath=$progdir/$progname
+     ;;
+  *)
+     _G_IFS=$IFS
+     IFS=${PATH_SEPARATOR-:}
+     for progdir in $PATH; do
+       IFS=$_G_IFS
+       test -x "$progdir/$progname" && break
+     done
+     IFS=$_G_IFS
+     test -n "$progdir" || progdir=`pwd`
+     progpath=$progdir/$progname
+     ;;
+esac
+
+
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
+
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
+
+opt_dry_run=false
+opt_quiet=false
+opt_verbose=false
+
+# Categories 'all' and 'none' are always available.  Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
+
+# By default, display warnings according to 'opt_warning_types'.  Set
+# 'warning_func'  to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
+
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
+
+
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
+
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
+
+
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
+{
+    $debug_cmd
+
+    test -t 1 && {
+      # COLORTERM and USE_ANSI_COLORS environment variables take
+      # precedence, because most terminfo databases neglect to describe
+      # whether color sequences are supported.
+      test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+      if test 1 = "$USE_ANSI_COLORS"; then
+        # Standard ANSI escape sequences
+        tc_reset=''
+        tc_bold='';   tc_standout=''
+        tc_red='';   tc_green=''
+        tc_blue='';  tc_cyan=''
+      else
+        # Otherwise trust the terminfo database after all.
+        test -n "`tput sgr0 2>/dev/null`" && {
+          tc_reset=`tput sgr0`
+          test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+          tc_standout=$tc_bold
+          test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+          test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+          test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+          test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+          test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+        }
+      fi
+    }
+
+    require_term_colors=:
+}
+
+
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+  # We should try to minimise forks, especially on Windows where they are
+  # unreasonably slow, so skip the feature probes when bash or zsh are
+  # being used:
+  if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+    : ${_G_HAVE_ARITH_OP="yes"}
+    : ${_G_HAVE_XSI_OPS="yes"}
+    # The += operator was introduced in bash 3.1
+    case $BASH_VERSION in
+      [12].* | 3.0 | 3.0*) ;;
+      *)
+        : ${_G_HAVE_PLUSEQ_OP="yes"}
+        ;;
+    esac
+  fi
+
+  # _G_HAVE_PLUSEQ_OP
+  # Can be empty, in which case the shell is probed, "yes" if += is
+  # useable or anything else if it does not work.
+  test -z "$_G_HAVE_PLUSEQ_OP" \
+    && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+    && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_append ()
+  {
+    $debug_cmd
+
+    eval "$1+=\$2"
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_append ()
+  {
+    $debug_cmd
+
+    eval "$1=\$$1\$2"
+  }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+  eval 'func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_for_eval "$2"
+    eval "$1+=\\ \$func_quote_for_eval_result"
+  }'
+else
+  func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_for_eval "$2"
+    eval "$1=\$$1\\ \$func_quote_for_eval_result"
+  }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE.  For example:
+#
+#   func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+    $debug_cmd
+
+    eval _G_current_value='`$ECHO $'$1'`'
+    _G_delim=`expr "$2" : '\(.\)'`
+
+    case $_G_delim$_G_current_value$_G_delim in
+      *"$2$_G_delim"*) ;;
+      *) func_append "$@" ;;
+    esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+  test -z "$_G_HAVE_ARITH_OP" \
+    && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+    && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+  eval 'func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=$(( $* ))
+  }'
+else
+  func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=`expr "$@"`
+  }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  # If this shell supports suffix pattern removal, then use it to avoid
+  # forking. Hide the definitions single quotes in case the shell chokes
+  # on unsupported syntax...
+  _b='func_basename_result=${1##*/}'
+  _d='case $1 in
+        */*) func_dirname_result=${1%/*}$2 ;;
+        *  ) func_dirname_result=$3        ;;
+      esac'
+
+else
+  # ...otherwise fall back to using sed.
+  _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+  _d='func_dirname_result=`$ECHO "$1"  |$SED "$sed_dirname"`
+      if test "X$func_dirname_result" = "X$1"; then
+        func_dirname_result=$3
+      else
+        func_append func_dirname_result "$2"
+      fi'
+fi
+
+eval 'func_basename ()
+{
+    $debug_cmd
+
+    '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+eval 'func_dirname ()
+{
+    $debug_cmd
+
+    '"$_d"'
+}'
+
+
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
+{
+    $debug_cmd
+
+    '"$_b"'
+    '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+    $debug_cmd
+
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname: $_G_line"
+    done
+    IFS=$func_echo_IFS
+}
+
+
+# func_echo_all ARG...
+# --------------------
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    _G_infix=$1; shift
+    _G_indent=$_G_infix
+    _G_prefix="$progname: $_G_infix: "
+    _G_message=$*
+
+    # Strip color escape sequences before counting printable length
+    for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+    do
+      test -n "$_G_tc" && {
+        _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+        _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+      }
+    done
+    _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`"  " ## exclude from sc_prohibit_nested_quotes
+
+    func_echo_infix_1_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_infix_1_IFS
+      $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+      _G_prefix=$_G_indent
+    done
+    IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    func_echo_infix_1 "  $tc_standout${tc_red}error$tc_reset" "$*" >&2
+}
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    $debug_cmd
+
+    func_error "$*"
+    exit $EXIT_FAILURE
+}
+
+
+# func_grep EXPRESSION FILENAME
+# -----------------------------
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $debug_cmd
+
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+  test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=${#1}
+  }'
+else
+  func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+  }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    $debug_cmd
+
+    _G_directory_path=$1
+    _G_dir_list=
+
+    if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+
+      # Protect directory names starting with '-'
+      case $_G_directory_path in
+        -*) _G_directory_path=./$_G_directory_path ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$_G_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        _G_dir_list=$_G_directory_path:$_G_dir_list
+
+        # If the last portion added has no slash in it, the list is done
+        case $_G_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
+      done
+      _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
+
+      func_mkdir_p_IFS=$IFS; IFS=:
+      for _G_dir in $_G_dir_list; do
+	IFS=$func_mkdir_p_IFS
+        # mkdir can fail with a 'File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$_G_dir" 2>/dev/null || :
+      done
+      IFS=$func_mkdir_p_IFS
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$_G_directory_path" || \
+        func_fatal_error "Failed to create '$1'"
+    fi
+}
+
+
+# func_mktempdir [BASENAME]
+# -------------------------
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, BASENAME is the basename for that directory.
+func_mktempdir ()
+{
+    $debug_cmd
+
+    _G_template=${TMPDIR-/tmp}/${1-$progname}
+
+    if test : = "$opt_dry_run"; then
+      # Return a directory name, but don't create it in dry-run mode
+      _G_tmpdir=$_G_template-$$
+    else
+
+      # If mktemp works, use that first and foremost
+      _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$_G_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        _G_tmpdir=$_G_template-${RANDOM-0}$$
+
+        func_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$_G_tmpdir"
+        umask $func_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$_G_tmpdir" || \
+        func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
+    fi
+
+    $ECHO "$_G_tmpdir"
+}
+
+
+# func_normal_abspath PATH
+# ------------------------
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+func_normal_abspath ()
+{
+    $debug_cmd
+
+    # These SED scripts presuppose an absolute path with a trailing slash.
+    _G_pathcar='s|^/\([^/]*\).*$|\1|'
+    _G_pathcdr='s|^/[^/]*||'
+    _G_removedotparts=':dotsl
+		s|/\./|/|g
+		t dotsl
+		s|/\.$|/|'
+    _G_collapseslashes='s|/\{1,\}|/|g'
+    _G_finalslash='s|/*$|/|'
+
+    # Start from root dir and reassemble the path.
+    func_normal_abspath_result=
+    func_normal_abspath_tpath=$1
+    func_normal_abspath_altnamespace=
+    case $func_normal_abspath_tpath in
+      "")
+        # Empty path, that just means $cwd.
+        func_stripname '' '/' "`pwd`"
+        func_normal_abspath_result=$func_stripname_result
+        return
+        ;;
+      # The next three entries are used to spot a run of precisely
+      # two leading slashes without using negated character classes;
+      # we take advantage of case's first-match behaviour.
+      ///*)
+        # Unusual form of absolute path, do nothing.
+        ;;
+      //*)
+        # Not necessarily an ordinary path; POSIX reserves leading '//'
+        # and for example Cygwin uses it to access remote file shares
+        # over CIFS/SMB, so we conserve a leading double slash if found.
+        func_normal_abspath_altnamespace=/
+        ;;
+      /*)
+        # Absolute path, do nothing.
+        ;;
+      *)
+        # Relative path, prepend $cwd.
+        func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+        ;;
+    esac
+
+    # Cancel out all the simple stuff to save iterations.  We also want
+    # the path to end with a slash for ease of parsing, so make sure
+    # there is one (and only one) here.
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+    while :; do
+      # Processed it all yet?
+      if test / = "$func_normal_abspath_tpath"; then
+        # If we ascended to the root using ".." the result may be empty now.
+        if test -z "$func_normal_abspath_result"; then
+          func_normal_abspath_result=/
+        fi
+        break
+      fi
+      func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcar"`
+      func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcdr"`
+      # Figure out what to do with it
+      case $func_normal_abspath_tcomponent in
+        "")
+          # Trailing empty path component, ignore it.
+          ;;
+        ..)
+          # Parent dir; strip last assembled component from result.
+          func_dirname "$func_normal_abspath_result"
+          func_normal_abspath_result=$func_dirname_result
+          ;;
+        *)
+          # Actual path component, append it.
+          func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+          ;;
+      esac
+    done
+    # Restore leading double-slash if one was found on entry.
+    func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
+{
+    $debug_cmd
+
+    $opt_quiet || func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
+{
+    $debug_cmd
+
+    func_relative_path_result=
+    func_normal_abspath "$1"
+    func_relative_path_tlibdir=$func_normal_abspath_result
+    func_normal_abspath "$2"
+    func_relative_path_tbindir=$func_normal_abspath_result
+
+    # Ascend the tree starting from libdir
+    while :; do
+      # check if we have found a prefix of bindir
+      case $func_relative_path_tbindir in
+        $func_relative_path_tlibdir)
+          # found an exact match
+          func_relative_path_tcancelled=
+          break
+          ;;
+        $func_relative_path_tlibdir*)
+          # found a matching prefix
+          func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+          func_relative_path_tcancelled=$func_stripname_result
+          if test -z "$func_relative_path_result"; then
+            func_relative_path_result=.
+          fi
+          break
+          ;;
+        *)
+          func_dirname $func_relative_path_tlibdir
+          func_relative_path_tlibdir=$func_dirname_result
+          if test -z "$func_relative_path_tlibdir"; then
+            # Have to descend all the way to the root!
+            func_relative_path_result=../$func_relative_path_result
+            func_relative_path_tcancelled=$func_relative_path_tbindir
+            break
+          fi
+          func_relative_path_result=../$func_relative_path_result
+          ;;
+      esac
+    done
+
+    # Now calculate path; take care to avoid doubling-up slashes.
+    func_stripname '' '/' "$func_relative_path_result"
+    func_relative_path_result=$func_stripname_result
+    func_stripname '/' '/' "$func_relative_path_tcancelled"
+    if test -n "$func_stripname_result"; then
+      func_append func_relative_path_result "/$func_stripname_result"
+    fi
+
+    # Normalisation. If bindir is libdir, return '.' else relative path.
+    if test -n "$func_relative_path_result"; then
+      func_stripname './' '' "$func_relative_path_result"
+      func_relative_path_result=$func_stripname_result
+    fi
+
+    test -n "$func_relative_path_result" || func_relative_path_result=.
+
+    :
+}
+
+
+# func_quote_for_eval ARG...
+# --------------------------
+# Aesthetically quote ARGs to be evaled later.
+# This function returns two values:
+#   i) func_quote_for_eval_result
+#      double-quoted, suitable for a subsequent eval
+#  ii) func_quote_for_eval_unquoted_result
+#      has all characters that are still active within double
+#      quotes backslashified.
+func_quote_for_eval ()
+{
+    $debug_cmd
+
+    func_quote_for_eval_unquoted_result=
+    func_quote_for_eval_result=
+    while test 0 -lt $#; do
+      case $1 in
+        *[\\\`\"\$]*)
+	  _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
+        *)
+          _G_unquoted_arg=$1 ;;
+      esac
+      if test -n "$func_quote_for_eval_unquoted_result"; then
+	func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
+      else
+        func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
+      fi
+
+      case $_G_unquoted_arg in
+        # Double-quote args containing shell metacharacters to delay
+        # word splitting, command substitution and variable expansion
+        # for a subsequent eval.
+        # Many Bourne shells cannot handle close brackets correctly
+        # in scan sets, so we specify it separately.
+        *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+          _G_quoted_arg=\"$_G_unquoted_arg\"
+          ;;
+        *)
+          _G_quoted_arg=$_G_unquoted_arg
+	  ;;
+      esac
+
+      if test -n "$func_quote_for_eval_result"; then
+	func_append func_quote_for_eval_result " $_G_quoted_arg"
+      else
+        func_append func_quote_for_eval_result "$_G_quoted_arg"
+      fi
+      shift
+    done
+}
+
+
+# func_quote_for_expand ARG
+# -------------------------
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+    $debug_cmd
+
+    case $1 in
+      *[\\\`\"]*)
+	_G_arg=`$ECHO "$1" | $SED \
+	    -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
+      *)
+        _G_arg=$1 ;;
+    esac
+
+    case $_G_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        _G_arg=\"$_G_arg\"
+        ;;
+    esac
+
+    func_quote_for_expand_result=$_G_arg
+}
+
+
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_stripname ()
+  {
+    $debug_cmd
+
+    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+    # positional parameters, so assign one to ordinary variable first.
+    func_stripname_result=$3
+    func_stripname_result=${func_stripname_result#"$1"}
+    func_stripname_result=${func_stripname_result%"$2"}
+  }'
+else
+  func_stripname ()
+  {
+    $debug_cmd
+
+    case $2 in
+      .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+      *)  func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+    esac
+  }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    $debug_cmd
+
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
+
+    func_quote_for_expand "$_G_cmd"
+    eval "func_notquiet $func_quote_for_expand_result"
+
+    $opt_dry_run || {
+      eval "$_G_cmd"
+      _G_status=$?
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
+      fi
+    }
+}
+
+
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    $debug_cmd
+
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
+
+    $opt_quiet || {
+      func_quote_for_expand "$_G_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    $opt_dry_run || {
+      eval "$_G_user_locale
+	    $_G_cmd"
+      _G_status=$?
+      eval "$_G_safe_locale"
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
+      fi
+    }
+}
+
+
+# func_tr_sh
+# ----------
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+    $debug_cmd
+
+    case $1 in
+    [0-9]* | *[!a-zA-Z0-9_]*)
+      func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
+      ;;
+    * )
+      func_tr_sh_result=$1
+      ;;
+    esac
+}
+
+
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $debug_cmd
+
+    $opt_verbose && func_echo "$*"
+
+    :
+}
+
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
+}
+
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+    $debug_cmd
+
+    # CATEGORY must be in the warning_categories list!
+    case " $warning_categories " in
+      *" $1 "*) ;;
+      *) func_internal_error "invalid warning category '$1'" ;;
+    esac
+
+    _G_category=$1
+    shift
+
+    case " $opt_warning_types " in
+      *" $_G_category "*) $warning_func ${1+"$@"} ;;
+    esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+    $debug_cmd
+
+    printf '%s\n%s\n' "$1" "$2" \
+      | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false.  Use it like this:
+#
+#  func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+    $debug_cmd
+
+    test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# Set a version string for this script.
+scriptversion=2014-01-07.03; # UTC
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# Copyright (C) 2010-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+#   #!/bin/sh
+#   . relative/path/to/funclib.sh
+#   . relative/path/to/options-parser
+#   scriptversion=1.0
+#   func_options ${1+"$@"}
+#   eval set dummy "$func_options_result"; shift
+#   ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# warranty; '.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'.  Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+       --debug        enable verbose shell tracing
+   -W, --warnings=CATEGORY
+                      report the warnings falling in CATEGORY [all]
+   -v, --verbose      verbosely report processing
+       --version      print version information and exit
+   -h, --help         print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+       'all'          show all warnings
+       'none'         turn off all the warnings
+       'error'        warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# to the main code.  A hook is just a named list of of function, that can
+# be run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+    $debug_cmd
+
+    func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns.  FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not accept hook functions." ;;
+    esac
+
+    eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
+func_remove_hook ()
+{
+    $debug_cmd
+
+    eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It is assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not support hook funcions.n" ;;
+    esac
+
+    eval _G_hook_fns=\$$1_hooks; shift
+
+    for _G_hook in $_G_hook_fns; do
+      eval $_G_hook '"$@"'
+
+      # store returned options list back into positional
+      # parameters for next 'cmd' execution.
+      eval _G_hook_result=\$${_G_hook}_result
+      eval set dummy "$_G_hook_result"; shift
+    done
+
+    func_quote_for_eval ${1+"$@"}
+    func_run_hooks_result=$func_quote_for_eval_result
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list in your hook function, remove any
+# options that you action, and then pass back the remaining unprocessed
+# options in '<hooked_function_name>_result', escaped suitably for
+# 'eval'.  Like this:
+#
+#    my_options_prep ()
+#    {
+#        $debug_cmd
+#
+#        # Extend the existing usage message.
+#        usage_message=$usage_message'
+#      -s, --silent       don'\''t print informational messages
+#    '
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_options_prep_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_options_prep my_options_prep
+#
+#
+#    my_silent_option ()
+#    {
+#        $debug_cmd
+#
+#        # Note that for efficiency, we parse as many options as we can
+#        # recognise in a loop before passing the remainder back to the
+#        # caller on the first unrecognised argument we encounter.
+#        while test $# -gt 0; do
+#          opt=$1; shift
+#          case $opt in
+#            --silent|-s) opt_silent=: ;;
+#            # Separate non-argument short options:
+#            -s*)         func_split_short_opt "$_G_opt"
+#                         set dummy "$func_split_short_opt_name" \
+#                             "-$func_split_short_opt_arg" ${1+"$@"}
+#                         shift
+#                         ;;
+#            *)            set dummy "$_G_opt" "$*"; shift; break ;;
+#          esac
+#        done
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_silent_option_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_parse_options my_silent_option
+#
+#
+#    my_option_validation ()
+#    {
+#        $debug_cmd
+#
+#        $opt_silent && $opt_verbose && func_fatal_help "\
+#    '--silent' and '--verbose' options are mutually exclusive."
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_option_validation_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_validate_options my_option_validation
+#
+# You'll alse need to manually amend $usage_message to reflect the extra
+# options you parse.  It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+    $debug_cmd
+
+    func_options_prep ${1+"$@"}
+    eval func_parse_options \
+        ${func_options_prep_result+"$func_options_prep_result"}
+    eval func_validate_options \
+        ${func_parse_options_result+"$func_parse_options_result"}
+
+    eval func_run_hooks func_options \
+        ${func_validate_options_result+"$func_validate_options_result"}
+
+    # save modified positional parameters for caller
+    func_options_result=$func_run_hooks_result
+}
+
+
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters.  If a hook function modifies that list, and
+# needs to propogate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before
+# returning.
+func_hookable func_options_prep
+func_options_prep ()
+{
+    $debug_cmd
+
+    # Option defaults:
+    opt_verbose=false
+    opt_warning_types=
+
+    func_run_hooks func_options_prep ${1+"$@"}
+
+    # save modified positional parameters for caller
+    func_options_prep_result=$func_run_hooks_result
+}
+
+
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
+{
+    $debug_cmd
+
+    func_parse_options_result=
+
+    # this just eases exit handling
+    while test $# -gt 0; do
+      # Defer to hook functions for initial option parsing, so they
+      # get priority in the event of reusing an option name.
+      func_run_hooks func_parse_options ${1+"$@"}
+
+      # Adjust func_parse_options positional parameters to match
+      eval set dummy "$func_run_hooks_result"; shift
+
+      # Break out of the loop if we already parsed every option.
+      test $# -gt 0 || break
+
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --debug|-x)   debug_cmd='set -x'
+                      func_echo "enabling shell trace mode"
+                      $debug_cmd
+                      ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                      set dummy --warnings none ${1+"$@"}
+                      shift
+		      ;;
+
+        --warnings|--warning|-W)
+                      test $# = 0 && func_missing_arg $_G_opt && break
+                      case " $warning_categories $1" in
+                        *" $1 "*)
+                          # trailing space prevents matching last $1 above
+                          func_append_uniq opt_warning_types " $1"
+                          ;;
+                        *all)
+                          opt_warning_types=$warning_categories
+                          ;;
+                        *none)
+                          opt_warning_types=none
+                          warning_func=:
+                          ;;
+                        *error)
+                          opt_warning_types=$warning_categories
+                          warning_func=func_fatal_error
+                          ;;
+                        *)
+                          func_fatal_error \
+                             "unsupported warning category: '$1'"
+                          ;;
+                      esac
+                      shift
+                      ;;
+
+        --verbose|-v) opt_verbose=: ;;
+        --version)    func_version ;;
+        -\?|-h)       func_usage ;;
+        --help)       func_help ;;
+
+	# Separate optargs to long options (plugins may need this):
+	--*=*)        func_split_equals "$_G_opt"
+	              set dummy "$func_split_equals_lhs" \
+                          "$func_split_equals_rhs" ${1+"$@"}
+                      shift
+                      ;;
+
+       # Separate optargs to short options:
+        -W*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        # Separate non-argument short options:
+        -\?*|-h*|-v*|-x*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "-$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        --)           break ;;
+        -*)           func_fatal_help "unrecognised option: '$_G_opt'" ;;
+        *)            set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+      esac
+    done
+
+    # save modified positional parameters for caller
+    func_quote_for_eval ${1+"$@"}
+    func_parse_options_result=$func_quote_for_eval_result
+}
+
+
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
+{
+    $debug_cmd
+
+    # Display all warnings if -W was not given.
+    test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
+
+    func_run_hooks func_validate_options ${1+"$@"}
+
+    # Bail if the options were screwed!
+    $exit_cmd $EXIT_FAILURE
+
+    # save modified positional parameters for caller
+    func_validate_options_result=$func_run_hooks_result
+}
+
+
+
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
+
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    $debug_cmd
+
+    eval \$ECHO \""Usage: $usage"\"
+    eval \$ECHO \""$fatal_help"\"
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
+func_help ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "$long_help_message"
+    exit 0
+}
+
+
+# func_missing_arg ARGNAME
+# ------------------------
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    $debug_cmd
+
+    func_error "Missing argument for '$1'."
+    exit_cmd=exit
+}
+
+
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
+# splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=${1%%=*}
+      func_split_equals_rhs=${1#*=}
+      test "x$func_split_equals_lhs" = "x$1" \
+        && func_split_equals_rhs=
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+      func_split_equals_rhs=
+      test "x$func_split_equals_lhs" = "x$1" \
+        || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+  }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_arg=${1#??}
+      func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
+      func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+  }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+    exit 0
+}
+
+
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
+{
+    $debug_cmd
+
+    eval \$ECHO \""Usage: $usage"\"
+    echo
+    $SED -n 's|^# ||
+        /^Written by/{
+          x;p;x
+        }
+	h
+	/^Written by/q' < "$progpath"
+    echo
+    eval \$ECHO \""$usage_message"\"
+}
+
+
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $debug_cmd
+
+    printf '%s\n' "$progname $scriptversion"
+    $SED -n '
+        /(C)/!b go
+        :more
+        /\./!{
+          N
+          s|\n# | |
+          b more
+        }
+        :go
+        /^# Written by /,/# warranty; / {
+          s|^# ||
+          s|^# *$||
+          s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+          p
+        }
+        /^# Written by / {
+          s|^# ||
+          p
+        }
+        /^warranty; /q' < "$progpath"
+
+    exit $?
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.6'
+
+
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
+{
+    $debug_cmd
+
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+    done
+    IFS=$func_echo_IFS
+}
+
+
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
+{
+    $debug_cmd
+
+    $warning_func ${1+"$@"}
+}
+
+
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+       --config             show all configuration variables
+       --debug              enable verbose shell tracing
+   -n, --dry-run            display commands without modifying any files
+       --features           display basic configuration information and exit
+       --mode=MODE          use operation mode MODE
+       --no-warnings        equivalent to '-Wnone'
+       --preserve-dup-deps  don't remove duplicate dependency libraries
+       --quiet, --silent    don't print informational messages
+       --tag=TAG            use configuration variables from tag TAG
+   -v, --verbose            print more informational messages than default
+       --version            print version information
+   -W, --warnings=CATEGORY  report the warnings falling in CATEGORY [all]
+   -h, --help, --help-all   print short, long, or detailed help message
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "$long_help_message
+
+MODE must be one of the following:
+
+       clean           remove files from the build directory
+       compile         compile a source file into a libtool object
+       execute         automatically set library path, then run a program
+       finish          complete the installation of libtool libraries
+       install         install libraries or executables
+       link            create a library or an executable
+       uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+       host-triplet:   $host
+       shell:          $SHELL
+       compiler:       $LTCC
+       compiler flags: $LTCFLAGS
+       linker:         $LD (gnu? $with_gnu_ld)
+       version:        $progname (GNU libtool) 2.4.6
+       automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+       autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+    exit 0
+}
+
+
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_lo2o ()
+  {
+    case $1 in
+      *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+      *   ) func_lo2o_result=$1               ;;
+    esac
+  }'
+
+  # func_xform LIBOBJ-OR-SOURCE
+  # ---------------------------
+  # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+  # suffix to a '.lo' libtool-object suffix.
+  eval 'func_xform ()
+  {
+    func_xform_result=${1%.*}.lo
+  }'
+else
+  # ...otherwise fall back to using sed.
+  func_lo2o ()
+  {
+    func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+  }
+
+  func_xform ()
+  {
+    func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+  }
+fi
+
+
+# func_fatal_configuration ARG...
+# -------------------------------
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+    func_fatal_error ${1+"$@"} \
+      "See the $PACKAGE documentation for more information." \
+      "Fatal configuration error."
+}
+
+
+# func_config
+# -----------
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
+
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+    done
+
+    exit $?
+}
+
+
+# func_features
+# -------------
+# Display the features supported by this script.
+func_features ()
+{
+    echo "host: $host"
+    if test yes = "$build_libtool_libs"; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test yes = "$build_old_libs"; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+
+    exit $?
+}
+
+
+# func_enable_tag TAGNAME
+# -----------------------
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+    # Global variable:
+    tagname=$1
+
+    re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+    re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+    sed_extractcf=/$re_begincf/,/$re_endcf/p
+
+    # Validate tagname.
+    case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+        func_fatal_error "invalid tag name: $tagname"
+        ;;
+    esac
+
+    # Don't test for the "default" C tag, as we know it's
+    # there but not specially marked.
+    case $tagname in
+        CC) ;;
+    *)
+        if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	  taglist="$taglist $tagname"
+
+	  # Evaluate the configuration.  Be careful to quote the path
+	  # and the sed script, to avoid splitting on whitespace, but
+	  # also don't use non-portable quotes within backquotes within
+	  # quotes we have to do it in 2 steps:
+	  extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	  eval "$extractedcf"
+        else
+	  func_error "ignoring unknown tag $tagname"
+        fi
+        ;;
+    esac
+}
+
+
+# func_check_version_match
+# ------------------------
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+    if test "$package_revision" != "$macro_revision"; then
+      if test "$VERSION" != "$macro_version"; then
+        if test -z "$macro_version"; then
+          cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+        else
+          cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+        fi
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+      fi
+
+      exit $EXIT_MISMATCH
+    fi
+}
+
+
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
+{
+    $debug_mode
+
+    # Option defaults:
+    opt_config=false
+    opt_dlopen=
+    opt_dry_run=false
+    opt_help=false
+    opt_mode=
+    opt_preserve_dup_deps=false
+    opt_quiet=false
+
+    nonopt=
+    preserve_args=
+
+    # Shorthand for --mode=foo, only valid as the first argument
+    case $1 in
+    clean|clea|cle|cl)
+      shift; set dummy --mode clean ${1+"$@"}; shift
+      ;;
+    compile|compil|compi|comp|com|co|c)
+      shift; set dummy --mode compile ${1+"$@"}; shift
+      ;;
+    execute|execut|execu|exec|exe|ex|e)
+      shift; set dummy --mode execute ${1+"$@"}; shift
+      ;;
+    finish|finis|fini|fin|fi|f)
+      shift; set dummy --mode finish ${1+"$@"}; shift
+      ;;
+    install|instal|insta|inst|ins|in|i)
+      shift; set dummy --mode install ${1+"$@"}; shift
+      ;;
+    link|lin|li|l)
+      shift; set dummy --mode link ${1+"$@"}; shift
+      ;;
+    uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+      shift; set dummy --mode uninstall ${1+"$@"}; shift
+      ;;
+    esac
+
+    # Pass back the list of options.
+    func_quote_for_eval ${1+"$@"}
+    libtool_options_prep_result=$func_quote_for_eval_result
+}
+func_add_hook func_options_prep libtool_options_prep
+
+
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
+{
+    $debug_cmd
+
+    # Perform our own loop to consume as many options as possible in
+    # each iteration.
+    while test $# -gt 0; do
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --dry-run|--dryrun|-n)
+                        opt_dry_run=:
+                        ;;
+
+        --config)       func_config ;;
+
+        --dlopen|-dlopen)
+                        opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+                        shift
+                        ;;
+
+        --preserve-dup-deps)
+                        opt_preserve_dup_deps=: ;;
+
+        --features)     func_features ;;
+
+        --finish)       set dummy --mode finish ${1+"$@"}; shift ;;
+
+        --help)         opt_help=: ;;
+
+        --help-all)     opt_help=': help-all' ;;
+
+        --mode)         test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_mode=$1
+                        case $1 in
+                          # Valid mode arguments:
+                          clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+                          # Catch anything else as an error
+                          *) func_error "invalid argument for $_G_opt"
+                             exit_cmd=exit
+                             break
+                             ;;
+                        esac
+                        shift
+                        ;;
+
+        --no-silent|--no-quiet)
+                        opt_quiet=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                        opt_warning=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-verbose)
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --silent|--quiet)
+                        opt_quiet=:
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --tag)          test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_tag=$1
+                        func_append preserve_args " $_G_opt $1"
+                        func_enable_tag "$1"
+                        shift
+                        ;;
+
+        --verbose|-v)   opt_quiet=false
+                        opt_verbose=:
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+	# An option not handled by this hook function:
+        *)		set dummy "$_G_opt" ${1+"$@"};	shift; break  ;;
+      esac
+    done
+
+
+    # save modified positional parameters for caller
+    func_quote_for_eval ${1+"$@"}
+    libtool_parse_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_parse_options libtool_parse_options
+
+
+
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+    # save first non-option argument
+    if test 0 -lt $#; then
+      nonopt=$1
+      shift
+    fi
+
+    # preserve --debug
+    test : = "$debug_cmd" || func_append preserve_args " --debug"
+
+    case $host in
+      # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+      # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+      *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+        # don't eliminate duplications in $postdeps and $predeps
+        opt_duplicate_compiler_generated_deps=:
+        ;;
+      *)
+        opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+        ;;
+    esac
+
+    $opt_help || {
+      # Sanity checks first:
+      func_check_version_match
+
+      test yes != "$build_libtool_libs" \
+        && test yes != "$build_old_libs" \
+        && func_fatal_configuration "not configured to build any kind of library"
+
+      # Darwin sucks
+      eval std_shrext=\"$shrext_cmds\"
+
+      # Only execute mode is allowed to have -dlopen flags.
+      if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+        func_error "unrecognized option '-dlopen'"
+        $ECHO "$help" 1>&2
+        exit $EXIT_FAILURE
+      fi
+
+      # Change the help message to a mode-specific one.
+      generic_help=$help
+      help="Try '$progname --help --mode=$opt_mode' for more information."
+    }
+
+    # Pass back the unparsed argument list
+    func_quote_for_eval ${1+"$@"}
+    libtool_validate_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_validate_options libtool_validate_options
+
+
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
+
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+  $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_p file
+# True iff FILE is a libtool '.la' library or '.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool '.la' library or '.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if 'file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case $lalib_p_line in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test yes = "$lalib_p"
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    test -f "$1" &&
+      $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_dirname_and_basename "$1" "" "."
+    func_stripname '' '.exe' "$func_basename_result"
+    func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $debug_cmd
+
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$sp$nl
+      eval cmd=\"$cmd\"
+      IFS=$save_ifs
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# 'FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $debug_cmd
+
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot.  Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+  func_resolve_sysroot_result=$1
+  case $func_resolve_sysroot_result in
+  =*)
+    func_stripname '=' '' "$func_resolve_sysroot_result"
+    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+    ;;
+  esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+  case $lt_sysroot:$1 in
+  ?*:"$lt_sysroot"*)
+    func_stripname "$lt_sysroot" '' "$1"
+    func_replace_sysroot_result='='$func_stripname_result
+    ;;
+  *)
+    # Including no sysroot.
+    func_replace_sysroot_result=$1
+    ;;
+  esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    $debug_cmd
+
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	func_append_quoted CC_quoted "$arg"
+      done
+      CC_expanded=`func_echo_all $CC`
+      CC_quoted_expanded=`func_echo_all $CC_quoted`
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	      # Double-quote args containing other shell metacharacters.
+	      func_append_quoted CC_quoted "$arg"
+	    done
+	    CC_expanded=`func_echo_all $CC`
+	    CC_quoted_expanded=`func_echo_all $CC_quoted`
+	    case "$@ " in
+	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with '--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+    write_libobj=$1
+    if test yes = "$build_libtool_libs"; then
+      write_lobj=\'$2\'
+    else
+      write_lobj=none
+    fi
+
+    if test yes = "$build_old_libs"; then
+      write_oldobj=\'$3\'
+    else
+      write_oldobj=none
+    fi
+
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+      $MV "${write_libobj}T" "$write_libobj"
+    }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+  $debug_cmd
+
+  func_convert_core_file_wine_to_w32_result=$1
+  if test -n "$1"; then
+    # Unfortunately, winepath does not exit with a non-zero error code, so we
+    # are forced to check the contents of stdout. On the other hand, if the
+    # command is not found, the shell will set an exit code of 127 and print
+    # *an error message* to stdout. So we must check for both error code of
+    # zero AND non-empty stdout, which explains the odd construction:
+    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+    if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
+      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+        $SED -e "$sed_naive_backslashify"`
+    else
+      func_convert_core_file_wine_to_w32_result=
+    fi
+  fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+  $debug_cmd
+
+  # unfortunately, winepath doesn't convert paths, only file names
+  func_convert_core_path_wine_to_w32_result=
+  if test -n "$1"; then
+    oldIFS=$IFS
+    IFS=:
+    for func_convert_core_path_wine_to_w32_f in $1; do
+      IFS=$oldIFS
+      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+      if test -n "$func_convert_core_file_wine_to_w32_result"; then
+        if test -z "$func_convert_core_path_wine_to_w32_result"; then
+          func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
+        else
+          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+        fi
+      fi
+    done
+    IFS=$oldIFS
+  fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+  $debug_cmd
+
+  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+    if test "$?" -ne 0; then
+      # on failure, ensure result is empty
+      func_cygpath_result=
+    fi
+  else
+    func_cygpath_result=
+    func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
+  fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format.  Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+  $debug_cmd
+
+  # awkward: cmd appends spaces to result
+  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+    $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+  $debug_cmd
+
+  if test -z "$2" && test -n "$1"; then
+    func_error "Could not determine host file name corresponding to"
+    func_error "  '$1'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback:
+    func_to_host_file_result=$1
+  fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+  $debug_cmd
+
+  if test -z "$4" && test -n "$3"; then
+    func_error "Could not determine the host path corresponding to"
+    func_error "  '$3'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback.  This is a deliberately simplistic "conversion" and
+    # should not be "improved".  See libtool.info.
+    if test "x$1" != "x$2"; then
+      lt_replace_pathsep_chars="s|$1|$2|g"
+      func_to_host_path_result=`echo "$3" |
+        $SED -e "$lt_replace_pathsep_chars"`
+    else
+      func_to_host_path_result=$3
+    fi
+  fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+  $debug_cmd
+
+  case $4 in
+  $1 ) func_to_host_path_result=$3$func_to_host_path_result
+    ;;
+  esac
+  case $4 in
+  $2 ) func_append func_to_host_path_result "$3"
+    ;;
+  esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via '$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+  $debug_cmd
+
+  $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result.  If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+  $debug_cmd
+
+  case ,$2, in
+    *,"$to_tool_file_cmd",*)
+      func_to_tool_file_result=$1
+      ;;
+    *)
+      $to_tool_file_cmd "$1"
+      func_to_tool_file_result=$func_to_host_file_result
+      ;;
+  esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+  func_to_host_file_result=$1
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_to_host_file_result=$func_convert_core_msys_to_w32_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+    # LT_CYGPATH in this case.
+    func_to_host_file_result=`cygpath -m "$1"`
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format.  Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_file_wine_to_w32 "$1"
+    func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result=$func_cygpath_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+    func_convert_core_file_wine_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result=$func_cygpath_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via '$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format.  If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+#   file name conversion function    : func_convert_file_X_to_Y ()
+#   path conversion function         : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same.  If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+  $debug_cmd
+
+  if test -z "$to_host_path_cmd"; then
+    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+    to_host_path_cmd=func_convert_path_$func_stripname_result
+  fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+  $debug_cmd
+
+  func_init_to_host_path_cmd
+  $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+  func_to_host_path_result=$1
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from ARG.  MSYS
+    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+    # and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result=$func_convert_core_msys_to_w32_result
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format.  Requires a wine environment and
+# a working winepath.  Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result=$func_cygpath_result
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from
+    # ARG. msys behavior is inconsistent here, cygpath turns them
+    # into '.;' and ';.', and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result=$func_cygpath_result
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+  $debug_cmd
+
+  func_dll_def_p_tmp=`$SED -n \
+    -e 's/^[	 ]*//' \
+    -e '/^\(;.*\)*$/d' \
+    -e 's/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p' \
+    -e q \
+    "$1"`
+  test DEF = "$func_dll_def_p_tmp"
+}
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $debug_cmd
+
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile=$nonopt  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+    pie_flag=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg=$arg
+	arg_mode=normal
+	;;
+
+      target )
+	libobj=$arg
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify '-o' more than once"
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-pie | -fpie | -fPIE)
+          func_append pie_flag " $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
+	  func_append later " $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
+	  lastarg=
+	  save_ifs=$IFS; IFS=,
+	  for arg in $args; do
+	    IFS=$save_ifs
+	    func_append_quoted lastarg "$arg"
+	  done
+	  IFS=$save_ifs
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
+
+	  # Add the arguments to base_compile.
+	  func_append base_compile " $lastarg"
+	  continue
+	  ;;
+
+	*)
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg=$srcfile
+	  srcfile=$arg
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      func_append_quoted base_compile "$lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      func_fatal_error "you must specify an argument for -Xcompile"
+      ;;
+    target)
+      func_fatal_error "you must specify a target with '-o'"
+      ;;
+    *)
+      # Get the name of the library object.
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj=$func_basename_result
+      }
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    case $libobj in
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
+    esac
+
+    case $libobj in
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+    *)
+      func_fatal_error "cannot determine name of library object from '$libobj'"
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -shared)
+	test yes = "$build_libtool_libs" \
+	  || func_fatal_configuration "cannot build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
+      -static)
+	build_libtool_libs=no
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    func_quote_for_eval "$libobj"
+    test "X$libobj" != "X$func_quote_for_eval_result" \
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+      && func_warning "libobj name '$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname=$func_basename_result
+    xdir=$func_dirname_result
+    lobj=$xdir$objdir/$objname
+
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
+
+    # Delete any leftover library objects.
+    if test yes = "$build_old_libs"; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
+      pic_mode=default
+      ;;
+    esac
+    if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test no = "$compiler_c_o"; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+      lockfile=$output_obj.lock
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test yes = "$need_locks"; then
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test warn = "$need_locks"; then
+      if test -f "$lockfile"; then
+	$ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+      func_append removelist " $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
+    fi
+
+    $opt_dry_run || $RM $removelist
+    func_append removelist " $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+    srcfile=$func_to_tool_file_result
+    func_quote_for_eval "$srcfile"
+    qsrcfile=$func_quote_for_eval_result
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test yes = "$build_libtool_libs"; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test no != "$pic_mode"; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
+
+      func_mkdir_p "$xdir$objdir"
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	func_append command " -o $lobj"
+      fi
+
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+      if test warn = "$need_locks" &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+
+      # Allow error messages only from the first compilation.
+      if test yes = "$suppress_opt"; then
+	suppress_output=' >/dev/null 2>&1'
+      fi
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test yes = "$build_old_libs"; then
+      if test yes != "$pic_mode"; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile$pie_flag"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test yes = "$compiler_c_o"; then
+	func_append command " -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      func_append command "$suppress_output"
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+      if test warn = "$need_locks" &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+      # Unlock the critical section if it was locked
+      if test no != "$need_locks"; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+
+    exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+  test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $opt_mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to build PIC objects only
+  -prefer-non-pic   try to build non-PIC objects only
+  -shared           do not build a '.o' file suitable for static linking
+  -static           only build a '.o' file suitable for static linking
+  -Wc,FLAG          pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to '-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the '--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the 'install' or 'cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -bindir BINDIR    specify path to binaries directory (for systems where
+                    libraries must be found in the PATH setting at runtime)
+  -dlopen FILE      '-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  use a list of object files found in FILE to specify objects
+  -os2dllname NAME  force a short DLL name on OS/2 (no effect on other OSes)
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+  -Wc,FLAG
+  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
+  -Wl,FLAG
+  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
+  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with '-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in '.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
+
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode '$opt_mode'"
+        ;;
+    esac
+
+    echo
+    $ECHO "Try '$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+  if test : = "$opt_help"; then
+    func_mode_help
+  else
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	func_mode_help
+      done
+    } | $SED -n '1p; 2,$s/^Usage:/  or: /p'
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	echo
+	func_mode_help
+      done
+    } |
+    $SED '1d
+      /^When reporting/,/^Report/{
+	H
+	d
+      }
+      $x
+      /information about other modes/d
+      /more detailed .*MODE/d
+      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+  fi
+  exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $debug_cmd
+
+    # The first argument is the command name.
+    cmd=$nonopt
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+
+    # Handle -dlopen flags immediately.
+    for file in $opt_dlopen; do
+      test -f "$file" \
+	|| func_fatal_help "'$file' is not a file"
+
+      dir=
+      case $file in
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "'$lib' is not a valid libtool archive"
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "'$file' was not linked with '-export-dynamic'"
+	  continue
+	fi
+
+	func_dirname "$file" "" "."
+	dir=$func_dirname_result
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  func_append dir "/$objdir"
+	else
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
+	  fi
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir=$func_dirname_result
+	;;
+
+      *)
+	func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir=$absdir
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic=$magic
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -* | *.la | *.lo ) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file=$progdir/$program
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file=$progdir/$program
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_append_quoted args "$file"
+    done
+
+    if $opt_dry_run; then
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    else
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd=\$cmd$args
+    fi
+}
+
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $debug_cmd
+
+    libs=
+    libdirs=
+    admincmds=
+
+    for opt in "$nonopt" ${1+"$@"}
+    do
+      if test -d "$opt"; then
+	func_append libdirs " $opt"
+
+      elif test -f "$opt"; then
+	if func_lalib_unsafe_p "$opt"; then
+	  func_append libs " $opt"
+	else
+	  func_warning "'$opt' is not a valid libtool archive"
+	fi
+
+      else
+	func_fatal_error "invalid argument '$opt'"
+      fi
+    done
+
+    if test -n "$libs"; then
+      if test -n "$lt_sysroot"; then
+        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+      else
+        sysroot_cmd=
+      fi
+
+      # Remove sysroot references
+      if $opt_dry_run; then
+        for lib in $libs; do
+          echo "removing references to $lt_sysroot and '=' prefixes from $lib"
+        done
+      else
+        tmpdir=`func_mktempdir`
+        for lib in $libs; do
+	  $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	    > $tmpdir/tmp-la
+	  mv -f $tmpdir/tmp-la $lib
+	done
+        ${RM}r "$tmpdir"
+      fi
+    fi
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || func_append admincmds "
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    $opt_quiet && exit $EXIT_SUCCESS
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      echo "----------------------------------------------------------------------"
+      echo "Libraries have been installed in:"
+      for libdir in $libdirs; do
+	$ECHO "   $libdir"
+      done
+      echo
+      echo "If you ever happen to want to link against installed libraries"
+      echo "in a given directory, LIBDIR, you must either use libtool, and"
+      echo "specify the full pathname of the library, or use the '-LLIBDIR'"
+      echo "flag during linking and do at least one of the following:"
+      if test -n "$shlibpath_var"; then
+	echo "   - add LIBDIR to the '$shlibpath_var' environment variable"
+	echo "     during execution"
+      fi
+      if test -n "$runpath_var"; then
+	echo "   - add LIBDIR to the '$runpath_var' environment variable"
+	echo "     during linking"
+      fi
+      if test -n "$hardcode_libdir_flag_spec"; then
+	libdir=LIBDIR
+	eval flag=\"$hardcode_libdir_flag_spec\"
+
+	$ECHO "   - use the '$flag' linker flag"
+      fi
+      if test -n "$admincmds"; then
+	$ECHO "   - have your system administrator run these commands:$admincmds"
+      fi
+      if test -f /etc/ld.so.conf; then
+	echo "   - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
+      fi
+      echo
+
+      echo "See any operating system documentation about shared libraries for"
+      case $host in
+	solaris2.[6789]|solaris2.1[0-9])
+	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	  echo "pages."
+	  ;;
+	*)
+	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
+	  ;;
+      esac
+      echo "----------------------------------------------------------------------"
+    fi
+    exit $EXIT_SUCCESS
+}
+
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+    $debug_cmd
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
+       # Allow the use of GNU shtool's install command.
+       case $nonopt in *shtool*) :;; *) false;; esac
+    then
+      # Aesthetically quote it.
+      func_quote_for_eval "$nonopt"
+      install_prog="$func_quote_for_eval_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_for_eval "$arg"
+    func_append install_prog "$func_quote_for_eval_result"
+    install_shared_prog=$install_prog
+    case " $install_prog " in
+      *[\\\ /]cp\ *) install_cp=: ;;
+      *) install_cp=false ;;
+    esac
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=false
+    stripme=
+    no_mode=:
+    for arg
+    do
+      arg2=
+      if test -n "$dest"; then
+	func_append files " $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=: ;;
+      -f)
+	if $install_cp; then :; else
+	  prev=$arg
+	fi
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  if test X-m = "X$prev" && test -n "$install_override_mode"; then
+	    arg2=$install_override_mode
+	    no_mode=false
+	  fi
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      func_quote_for_eval "$arg"
+      func_append install_prog " $func_quote_for_eval_result"
+      if test -n "$arg2"; then
+	func_quote_for_eval "$arg2"
+      fi
+      func_append install_shared_prog " $func_quote_for_eval_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the '$prev' option requires an argument"
+
+    if test -n "$install_override_mode" && $no_mode; then
+      if $install_cp; then :; else
+	func_quote_for_eval "$install_override_mode"
+	func_append install_shared_prog " -m $func_quote_for_eval_result"
+      fi
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
+      fi
+    fi
+
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=:
+    if $isdir; then
+      destdir=$dest
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir=$func_dirname_result
+      destname=$func_basename_result
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "'$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "'$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic=$magic
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	func_append staticlibs " $file"
+	;;
+
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "'$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append current_libdirs " $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append future_libdirs " $libdir" ;;
+	  esac
+	fi
+
+	func_dirname "$file" "/" ""
+	dir=$func_dirname_result
+	func_append dir "$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking '$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname=$1
+	  shift
+
+	  srcname=$realname
+	  test -n "$relink_command" && srcname=${realname}T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme=$stripme
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=
+	      ;;
+	    esac
+	    ;;
+	  os2*)
+	    case $realname in
+	    *_dll.a)
+	      tstripme=
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try 'ln -sf' first, because the 'ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib=$destdir/$realname
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name=$func_basename_result
+	instname=$dir/${name}i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile=$destdir/$destname
+	else
+	  func_basename "$file"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest=$destfile
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to '$destfile'"
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test yes = "$build_old_libs"; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile=$destdir/$destname
+	else
+	  func_basename "$file"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=.exe
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script '$wrapper'"
+
+	  finalize=:
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "'$lib' has not been installed in '$libdir'"
+	      finalize=false
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test no = "$fast_install" && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if $finalize; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file=$func_basename_result
+	        outputname=$tmpdir/$file
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_quiet || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink '$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file=$outputname
+	      else
+	        func_warning "cannot relink '$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      func_basename "$file"
+      name=$func_basename_result
+
+      # Set up the ranlib parameters.
+      oldlib=$destdir/$name
+      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+      tool_oldlib=$func_to_tool_file_result
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run '$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $debug_cmd
+
+    my_outputname=$1
+    my_originator=$2
+    my_pic_p=${3-false}
+    my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms=${my_outputname}S.c
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist=$output_objdir/$my_outputname.nm
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test yes = "$dlself"; then
+	  func_verbose "generating symbol list for '$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+	    func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
+	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols=$output_objdir/$outputname.exp
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin* | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from '$dlprefile'"
+	  func_basename "$dlprefile"
+	  name=$func_basename_result
+          case $host in
+	    *cygwin* | *mingw* | *cegcc* )
+	      # if an import library, we need to obtain dlname
+	      if func_win32_import_lib_p "$dlprefile"; then
+	        func_tr_sh "$dlprefile"
+	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
+	        dlprefile_dlbasename=
+	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+	          # Use subshell, to avoid clobbering current variable values
+	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+	          if test -n "$dlprefile_dlname"; then
+	            func_basename "$dlprefile_dlname"
+	            dlprefile_dlbasename=$func_basename_result
+	          else
+	            # no lafile. user explicitly requested -dlpreopen <import library>.
+	            $sharedlib_from_linklib_cmd "$dlprefile"
+	            dlprefile_dlbasename=$sharedlib_from_linklib_result
+	          fi
+	        fi
+	        $opt_dry_run || {
+	          if test -n "$dlprefile_dlbasename"; then
+	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+	          else
+	            func_warning "Could not compute DLL name from $name"
+	            eval '$ECHO ": $name " >> "$nlist"'
+	          fi
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+	        }
+	      else # not an import lib
+	        $opt_dry_run || {
+	          eval '$ECHO ": $name " >> "$nlist"'
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	        }
+	      fi
+	    ;;
+	    *)
+	      $opt_dry_run || {
+	        eval '$ECHO ": $name " >> "$nlist"'
+	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	      }
+	    ;;
+          esac
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  func_show_eval '$RM "${nlist}I"'
+	  if test -n "$global_symbol_to_import"; then
+	    eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+	  fi
+
+	  echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+  LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+  for (; symbol->name; ++symbol)
+    {"
+	    $SED 's/.*/      if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+	    echo >> "$output_objdir/$my_dlsyms" "\
+    }
+}"
+	  fi
+	  echo >> "$output_objdir/$my_dlsyms" "\
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{ {\"$my_originator\", (void *) 0},"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+  {\"@INIT@\", (void *) &lt_syminit},"
+	  fi
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  echo >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    $my_pic_p && pic_flag_for_symtable=" $pic_flag"
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) func_append symtab_cflags " $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj=$output_objdir/${my_outputname}S.$objext
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for '$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+  $debug_cmd
+
+  win32_libid_type=unknown
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+      case $nm_interface in
+      "MS dumpbin")
+	if func_cygming_ms_implib_p "$1" ||
+	   func_cygming_gnu_implib_p "$1"
+	then
+	  win32_nmres=import
+	else
+	  win32_nmres=
+	fi
+	;;
+      *)
+	func_to_tool_file "$1" func_convert_file_msys_to_w32
+	win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	  $SED -n -e '
+	    1,100{
+		/ I /{
+		    s|.*|import|
+		    p
+		    q
+		}
+	    }'`
+	;;
+      esac
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+  $debug_cmd
+
+  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+  $debug_cmd
+
+  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+    $SED '/^Contents of section '"$match_literal"':/{
+      # Place marker at beginning of archive member dllname section
+      s/.*/====MARK====/
+      p
+      d
+    }
+    # These lines can sometimes be longer than 43 characters, but
+    # are always uninteresting
+    /:[	 ]*file format pe[i]\{,1\}-/d
+    /^In archive [^:]*:/d
+    # Ensure marker is printed
+    /^====MARK====/p
+    # Remove all lines with less than 43 characters
+    /^.\{43\}/!d
+    # From remaining lines, remove first 43 characters
+    s/^.\{43\}//' |
+    $SED -n '
+      # Join marker and all lines until next marker into a single line
+      /^====MARK====/ b para
+      H
+      $ b para
+      b
+      :para
+      x
+      s/\n//g
+      # Remove the marker
+      s/^====MARK====//
+      # Remove trailing dots and whitespace
+      s/[\. \t]*$//
+      # Print
+      /./p' |
+    # we now have a list, one entry per line, of the stringified
+    # contents of the appropriate section of all members of the
+    # archive that possess that section. Heuristic: eliminate
+    # all those that have a first or second character that is
+    # a '.' (that is, objdump's representation of an unprintable
+    # character.) This should work for all archives with less than
+    # 0x302f exports -- but will fail for DLLs whose name actually
+    # begins with a literal '.' or a single character followed by
+    # a '.'.
+    #
+    # Of those that remain, print the first one.
+    $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+  $debug_cmd
+
+  if func_cygming_gnu_implib_p "$1"; then
+    # binutils import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+  elif func_cygming_ms_implib_p "$1"; then
+    # ms-generated import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+  else
+    # unknown
+    sharedlib_from_linklib_result=
+  fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $debug_cmd
+
+    f_ex_an_ar_dir=$1; shift
+    f_ex_an_ar_oldlib=$1
+    if test yes = "$lock_old_archive_extraction"; then
+      lockfile=$f_ex_an_ar_oldlib.lock
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+		   'stat=$?; rm -f "$lockfile"; exit $stat'
+    if test yes = "$lock_old_archive_extraction"; then
+      $opt_dry_run || rm -f "$lockfile"
+    fi
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $debug_cmd
+
+    my_gentop=$1; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=
+    my_xlib=
+    my_xabs=
+    my_xdir=
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib=$func_basename_result
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir=$my_gentop/$my_xlib_u
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  func_basename "$darwin_archive"
+	  darwin_base_archive=$func_basename_result
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches; do
+	      func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+	      cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      func_extract_an_archive "`pwd`" "$darwin_base_archive"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+    done
+
+    func_extract_archives_result=$my_oldobjs
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory where it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=${1-no}
+
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    file=\"\$0\""
+
+    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+    $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+    ECHO=\"$qECHO\"
+  fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ that is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options that match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+  lt_script_arg0=\$0
+  shift
+  for lt_opt
+  do
+    case \"\$lt_opt\" in
+    --lt-debug) lt_option_debug=1 ;;
+    --lt-dump-script)
+        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+        cat \"\$lt_dump_D/\$lt_dump_F\"
+        exit 0
+      ;;
+    --lt-*)
+        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+        exit 1
+      ;;
+    esac
+  done
+
+  # Print the debug banner immediately:
+  if test -n \"\$lt_option_debug\"; then
+    echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
+  fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+  lt_dump_args_N=1;
+  for lt_arg
+  do
+    \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+  done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+  case $host in
+  # Backslashes separate directories on plain windows
+  *-*-mingw | *-*-os2* | *-cegcc*)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+    ;;
+
+  *)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+    ;;
+  esac
+  $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+  case \" \$* \" in
+  *\\ --lt-*)
+    for lt_wr_arg
+    do
+      case \$lt_wr_arg in
+      --lt-*) ;;
+      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+      esac
+      shift
+    done ;;
+  esac
+  func_exec_program_core \${1+\"\$@\"}
+}
+
+  # Parse options
+  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+  done
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test yes = "$fast_install"; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+
+	  $ECHO "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	\$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+	else
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$ECHO "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# fixup the dll searchpath if we need to.
+	#
+	# Fix the DLL searchpath if we need to.  Do this before prepending
+	# to shlibpath, because on Windows, both are PATH and uninstalled
+	# libraries must come first.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	# Export our shlibpath_var if we have one.
+	if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+      func_exec_program \${1+\"\$@\"}
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+*/
+EOF
+	    cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
+/* declarations of non-ANSI functions */
+#if defined __MINGW32__
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined __CYGWIN__
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined other_platform || defined ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined _MSC_VER
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+# define S_IXUSR _S_IEXEC
+#elif defined __MINGW32__
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+#elif defined __CYGWIN__
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined other platforms ... */
+#endif
+
+#if defined PATH_MAX
+# define LT_PATHMAX PATH_MAX
+#elif defined MAXPATHLEN
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+  defined __OS2__
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free (stale); stale = 0; } \
+} while (0)
+
+#if defined LT_DEBUGWRAPPER
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+	    cat <<EOF
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_path "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_path "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test yes = "$fast_install"; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  int rval = 127;
+
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  newargz = XMALLOC (char *, (size_t) argc + 1);
+
+  /* very simple arg parsing; don't want to rely on getopt
+   * also, copy all non cwrapper options to newargz, except
+   * argz[0], which is handled differently
+   */
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (STREQ (argv[i], dumpscript_opt))
+	{
+EOF
+	    case $host in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+
+	    cat <<"EOF"
+	  lt_dump_script (stdout);
+	  return 0;
+	}
+      if (STREQ (argv[i], debug_opt))
+	{
+          lt_debug = 1;
+          continue;
+	}
+      if (STREQ (argv[i], ltwrapper_option_prefix))
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal (__FILE__, __LINE__,
+		    "unrecognized %s option: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+EOF
+	    cat <<EOF
+  /* The GNU banner must be the first non-error debug message */
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
+EOF
+	    cat <<"EOF"
+  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (before symlink chase) at: %s\n",
+		  tmp_pathspec);
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (after symlink chase) at: %s\n",
+		  actual_cwrapper_path);
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(main) libtool target name: %s\n",
+		  target_name);
+EOF
+
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
+
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
+     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+     because on Windows, both *_VARNAMEs are PATH but uninstalled
+     libraries must come first. */
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+		  nonnull (lt_argv_zero));
+  for (i = 0; i < newargc; i++)
+    {
+      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+		      i, nonnull (newargz[i]));
+    }
+
+EOF
+
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  newargz = prepare_spawn (newargz);
+  rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      lt_debugprintf (__FILE__, __LINE__,
+		      "(main) failed to launch target \"%s\": %s\n",
+		      lt_argv_zero, nonnull (strerror (errno)));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+
+	    cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable (const char *path)
+{
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  size_t tmp_len;
+  char *concat_name;
+
+  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+                  nonempty (wrapper));
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+    }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = (size_t) (q - p);
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+                              nonnull (strerror (errno)));
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+              nonnull (strerror (errno)));
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      lt_debugprintf (__FILE__, __LINE__,
+		      "checking path component for symlinks: %s\n",
+		      tmp_pathspec);
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  lt_fatal (__FILE__, __LINE__,
+		    "error accessing file \"%s\": %s",
+		    tmp_pathspec, nonnull (strerror (errno)));
+	}
+    }
+  XFREE (tmp_pathspec);
+
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal (__FILE__, __LINE__,
+		"could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert (str != NULL);
+  assert (pat != NULL);
+
+  len = strlen (str);
+  patlen = strlen (pat);
+
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (STREQ (str, pat))
+	*str = '\0';
+    }
+  return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+  va_list args;
+  if (lt_debug)
+    {
+      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+      va_start (args, fmt);
+      (void) vfprintf (stderr, fmt, args);
+      va_end (args);
+    }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+	       int line, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+  return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+  return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_setenv) setting '%s' to '%s'\n",
+                  nonnull (name), nonnull (value));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    size_t len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      size_t orig_value_len = strlen (orig_value);
+      size_t add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      size_t len = strlen (new_value);
+      while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[--len] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+EOF
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+   Note that spawn() does not by itself call the command interpreter
+     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+         GetVersionEx(&v);
+         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+      }) ? "cmd.exe" : "command.com").
+   Instead it simply concatenates the arguments, separated by ' ', and calls
+   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
+   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+   special way:
+   - Space and tab are interpreted as delimiters. They are not treated as
+     delimiters if they are surrounded by double quotes: "...".
+   - Unescaped double quotes are removed from the input. Their only effect is
+     that within double quotes, space and tab are treated like normal
+     characters.
+   - Backslashes not followed by double quotes are not special.
+   - But 2*n+1 backslashes followed by a double quote become
+     n backslashes followed by a double quote (n >= 0):
+       \" -> "
+       \\\" -> \"
+       \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+  size_t argc;
+  char **new_argv;
+  size_t i;
+
+  /* Count number of arguments.  */
+  for (argc = 0; argv[argc] != NULL; argc++)
+    ;
+
+  /* Allocate new argument vector.  */
+  new_argv = XMALLOC (char *, argc + 1);
+
+  /* Put quoted arguments into the new argument vector.  */
+  for (i = 0; i < argc; i++)
+    {
+      const char *string = argv[i];
+
+      if (string[0] == '\0')
+	new_argv[i] = xstrdup ("\"\"");
+      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+	{
+	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+	  size_t length;
+	  unsigned int backslashes;
+	  const char *s;
+	  char *quoted_string;
+	  char *p;
+
+	  length = 0;
+	  backslashes = 0;
+	  if (quote_around)
+	    length++;
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		length += backslashes + 1;
+	      length++;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    length += backslashes + 1;
+
+	  quoted_string = XMALLOC (char, length + 1);
+
+	  p = quoted_string;
+	  backslashes = 0;
+	  if (quote_around)
+	    *p++ = '"';
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		{
+		  unsigned int j;
+		  for (j = backslashes + 1; j > 0; j--)
+		    *p++ = '\\';
+		}
+	      *p++ = c;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    {
+	      unsigned int j;
+	      for (j = backslashes; j > 0; j--)
+		*p++ = '\\';
+	      *p++ = '"';
+	    }
+	  *p = '\0';
+
+	  new_argv[i] = quoted_string;
+	}
+      else
+	new_argv[i] = (char *) string;
+    }
+  new_argv[argc] = NULL;
+
+  return new_argv;
+}
+EOF
+		;;
+	    esac
+
+            cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+	    func_emit_wrapper yes |
+	      $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/  fputs ("\1", f);/p
+g
+D'
+            cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+    $debug_cmd
+
+    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+    *import*) : ;;
+    *) false ;;
+    esac
+}
+
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+    $debug_cmd
+
+    case " $compile_command " in
+    *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+      suncc_use_cstd_abi=no
+      ;;
+    *)
+      suncc_use_cstd_abi=yes
+      ;;
+    esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+    $debug_cmd
+
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # what system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll that has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args=$nonopt
+    base_compile="$nonopt $@"
+    compile_command=$nonopt
+    finalize_command=$nonopt
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+    new_inherited_linker_flags=
+
+    avoid_version=no
+    bindir=
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    os2dllname=
+    non_pic_objects=
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=false
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+    weak_libs=
+    single_module=$wl-single_module
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -shared)
+	test yes != "$build_libtool_libs" \
+	  && func_fatal_configuration "cannot build a shared library"
+	build_old_libs=no
+	break
+	;;
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
+	  if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
+	    func_warning "complete static linking is impossible in this configuration"
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	-static)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg=$1
+      shift
+      func_quote_for_eval "$arg"
+      qarg=$func_quote_for_eval_unquoted_result
+      func_append libtool_args " $func_quote_for_eval_result"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	bindir)
+	  bindir=$arg
+	  prev=
+	  continue
+	  ;;
+	dlfiles|dlprefiles)
+	  $preload || {
+	    # Add the symbol object into the linking commands.
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
+	    preload=:
+	  }
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test no = "$dlself"; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test dlprefiles = "$prev"; then
+	      dlself=yes
+	    elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test dlfiles = "$prev"; then
+	      func_append dlfiles " $arg"
+	    else
+	      func_append dlprefiles " $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols=$arg
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file '$arg' does not exist"
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex=$arg
+	  prev=
+	  continue
+	  ;;
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) func_append deplibs " $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir=$arg
+	  prev=
+	  continue
+	  ;;
+	mllvm)
+	  # Clang does not use LLVM to link, so we can simply discard any
+	  # '-mllvm $arg' options when doing the link step.
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat "$save_arg"`
+	    do
+#	      func_append moreargs " $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if func_lalib_unsafe_p "$arg"; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		func_source "$arg"
+
+		if test -z "$pic_object" ||
+		   test -z "$non_pic_object" ||
+		   test none = "$pic_object" &&
+		   test none = "$non_pic_object"; then
+		  func_fatal_error "cannot find name of object for '$arg'"
+		fi
+
+		# Extract subdirectory from the argument.
+		func_dirname "$arg" "/" ""
+		xdir=$func_dirname_result
+
+		if test none != "$pic_object"; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object=$xdir$pic_object
+
+		  if test dlfiles = "$prev"; then
+		    if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
+		      func_append dlfiles " $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test dlprefiles = "$prev"; then
+		    # Preload the old-style object.
+		    func_append dlprefiles " $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  func_append libobjs " $pic_object"
+		  arg=$pic_object
+		fi
+
+		# Non-PIC object.
+		if test none != "$non_pic_object"; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object=$xdir$non_pic_object
+
+		  # A standard non-PIC object
+		  func_append non_pic_objects " $non_pic_object"
+		  if test -z "$pic_object" || test none = "$pic_object"; then
+		    arg=$non_pic_object
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object=$pic_object
+		  func_append non_pic_objects " $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if $opt_dry_run; then
+		  # Extract subdirectory from the argument.
+		  func_dirname "$arg" "/" ""
+		  xdir=$func_dirname_result
+
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "'$arg' is not a valid libtool object"
+		fi
+	      fi
+	    done
+	  else
+	    func_fatal_error "link input file '$arg' does not exist"
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	os2dllname)
+	  os2dllname=$arg
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex=$arg
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release=-$arg
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    func_fatal_error "only absolute run-paths are allowed"
+	    ;;
+	  esac
+	  if test rpath = "$prev"; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) func_append rpath " $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) func_append xrpath " $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	shrext)
+	  shrext_cmds=$arg
+	  prev=
+	  continue
+	  ;;
+	weak)
+	  func_append weak_libs " $arg"
+	  prev=
+	  continue
+	  ;;
+	xcclinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xcompiler)
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $wl$qarg"
+	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n "$prev"
+
+      prevarg=$arg
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	func_fatal_error "'-allow-undefined' must not be used because it is the default"
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -bindir)
+	prev=bindir
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
+	fi
+	if test X-export-symbols = "X$arg"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -framework)
+	prev=framework
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	func_stripname "-L" '' "$arg"
+	if test -z "$func_stripname_result"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between '-L' and '$1'"
+	  else
+	    func_fatal_error "need path for '-L' option"
+	  fi
+	fi
+	func_resolve_sysroot "$func_stripname_result"
+	dir=$func_resolve_sysroot_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of '$dir'"
+	  dir=$absdir
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "* | *" $arg "*)
+	  # Will only happen for absolute or sysroot arguments
+	  ;;
+	*)
+	  # Preserve sysroot, but never include relative directories
+	  case $dir in
+	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+	    *) func_append deplibs " -L$dir" ;;
+	  esac
+	  func_append lib_search_path " $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
+	  *) func_append dllsearchpath ":$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test X-lc = "X$arg" || test X-lm = "X$arg"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    func_append deplibs " System.ltframework"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  esac
+	elif test X-lc_r = "X$arg"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	func_append deplibs " $arg"
+	continue
+	;;
+
+      -mllvm)
+	prev=mllvm
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot|--sysroot)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	prev=xcompiler
+	continue
+	;;
+
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) func_append new_inherited_linker_flags " $arg" ;;
+	esac
+	continue
+	;;
+
+      -multi_module)
+	single_module=$wl-multi_module
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  func_warning "'-no-install' is ignored for $host"
+	  func_warning "assuming '-no-fast-install' instead"
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -os2dllname)
+	prev=os2dllname
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	=*)
+	  func_stripname '=' '' "$dir"
+	  dir=$lt_sysroot$func_stripname_result
+	  ;;
+	*)
+	  func_fatal_error "only absolute run-paths are allowed"
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) func_append xrpath " $dir" ;;
+	esac
+	continue
+	;;
+
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -static | -static-libtool-libs)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -weak)
+        prev=weak
+	continue
+	;;
+
+      -Wc,*)
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs=$IFS; IFS=,
+	for flag in $args; do
+	  IFS=$save_ifs
+          func_quote_for_eval "$flag"
+	  func_append arg " $func_quote_for_eval_result"
+	  func_append compiler_flags " $func_quote_for_eval_result"
+	done
+	IFS=$save_ifs
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Wl,*)
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs=$IFS; IFS=,
+	for flag in $args; do
+	  IFS=$save_ifs
+          func_quote_for_eval "$flag"
+	  func_append arg " $wl$func_quote_for_eval_result"
+	  func_append compiler_flags " $wl$func_quote_for_eval_result"
+	  func_append linker_flags " $func_quote_for_eval_result"
+	done
+	IFS=$save_ifs
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+	;;
+
+      # Flags to be passed through unchanged, with rationale:
+      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
+      # -r[0-9][0-9]*        specify processor for the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+      # +DA*, +DD*           enable 64-bit mode for the HP compiler
+      # -q*                  compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+      # -F/path              path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # -fstack-protector*   stack protector flags for GCC
+      # @file                GCC response files
+      # -tp=*                Portland pgcc target processor selection
+      # --sysroot=*          for sysroot support
+      # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      # -specs=*             GCC specs files
+      # -stdlib=*            select c++ std lib with clang
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+      -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*| \
+      -specs=*)
+        func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        func_append compiler_flags " $arg"
+        continue
+        ;;
+
+      -Z*)
+        if test os2 = "`expr $host : '.*\(os2\)'`"; then
+          # OS/2 uses -Zxxx to specify OS/2-specific options
+	  compiler_flags="$compiler_flags $arg"
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  case $arg in
+	  -Zlinker | -Zstack)
+	    prev=xcompiler
+	    ;;
+	  esac
+	  continue
+        else
+	  # Otherwise treat like 'Some other compiler flag' below
+	  func_quote_for_eval "$arg"
+	  arg=$func_quote_for_eval_result
+        fi
+	;;
+
+      # Some other compiler flag.
+      -* | +*)
+        func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+	;;
+
+      *.$objext)
+	# A standard object.
+	func_append objs " $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if func_lalib_unsafe_p "$arg"; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  func_source "$arg"
+
+	  if test -z "$pic_object" ||
+	     test -z "$non_pic_object" ||
+	     test none = "$pic_object" &&
+	     test none = "$non_pic_object"; then
+	    func_fatal_error "cannot find name of object for '$arg'"
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  func_dirname "$arg" "/" ""
+	  xdir=$func_dirname_result
+
+	  test none = "$pic_object" || {
+	    # Prepend the subdirectory the object is found in.
+	    pic_object=$xdir$pic_object
+
+	    if test dlfiles = "$prev"; then
+	      if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
+		func_append dlfiles " $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test dlprefiles = "$prev"; then
+	      # Preload the old-style object.
+	      func_append dlprefiles " $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    func_append libobjs " $pic_object"
+	    arg=$pic_object
+	  }
+
+	  # Non-PIC object.
+	  if test none != "$non_pic_object"; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object=$xdir$non_pic_object
+
+	    # A standard non-PIC object
+	    func_append non_pic_objects " $non_pic_object"
+	    if test -z "$pic_object" || test none = "$pic_object"; then
+	      arg=$non_pic_object
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object=$pic_object
+	    func_append non_pic_objects " $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if $opt_dry_run; then
+	    # Extract subdirectory from the argument.
+	    func_dirname "$arg" "/" ""
+	    xdir=$func_dirname_result
+
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "'$arg' is not a valid libtool object"
+	  fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	func_append deplibs " $arg"
+	func_append old_deplibs " $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	func_resolve_sysroot "$arg"
+	if test dlfiles = "$prev"; then
+	  # This library was specified with -dlopen.
+	  func_append dlfiles " $func_resolve_sysroot_result"
+	  prev=
+	elif test dlprefiles = "$prev"; then
+	  # The library was specified with -dlpreopen.
+	  func_append dlprefiles " $func_resolve_sysroot_result"
+	  prev=
+	else
+	  func_append deplibs " $func_resolve_sysroot_result"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+      fi
+    done # argument parsing loop
+
+    test -n "$prev" && \
+      func_fatal_help "the '$prevarg' option requires an argument"
+
+    if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    func_basename "$output"
+    outputname=$func_basename_result
+    libobjs_save=$libobjs
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    # Definition is injected by LT_CONFIG during libtool generation.
+    func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
+    func_dirname "$output" "/" ""
+    output_objdir=$func_dirname_result$objdir
+    func_to_tool_file "$output_objdir/"
+    tool_output_objdir=$func_to_tool_file_result
+    # Create the object directory.
+    func_mkdir_p "$output_objdir"
+
+    # Determine the type of output
+    case $output in
+    "")
+      func_fatal_help "you must specify an output file"
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if $opt_preserve_dup_deps; then
+	case "$libs " in
+	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	esac
+      fi
+      func_append libs " $deplib"
+    done
+
+    if test lib = "$linkmode"; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if $opt_duplicate_compiler_generated_deps; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+	  esac
+	  func_append pre_post_deps " $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
+    case $linkmode in
+    lib)
+	passes="conv dlpreopen link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=false
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+
+    for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test lib,link = "$linkmode,$pass"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs=$tmp_deplibs
+      fi
+
+      if test lib,link = "$linkmode,$pass" ||
+	 test prog,scan = "$linkmode,$pass"; then
+	libs=$deplibs
+	deplibs=
+      fi
+      if test prog = "$linkmode"; then
+	case $pass in
+	dlopen) libs=$dlfiles ;;
+	dlpreopen) libs=$dlprefiles ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	esac
+      fi
+      if test lib,dlpreopen = "$linkmode,$pass"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  func_resolve_sysroot "$lib"
+	  case $lib in
+	  *.la)	func_source "$func_resolve_sysroot_result" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+	    func_basename "$deplib"
+            deplib_base=$func_basename_result
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) func_append deplibs " $deplib" ;;
+	    esac
+	  done
+	done
+	libs=$dlprefiles
+      fi
+      if test dlopen = "$pass"; then
+	# Collect dlpreopened libraries
+	save_deplibs=$deplibs
+	deplibs=
+      fi
+
+      for deplib in $libs; do
+	lib=
+	found=false
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	  if test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    func_append compiler_flags " $deplib"
+	    if test lib = "$linkmode"; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test lib != "$linkmode" && test prog != "$linkmode"; then
+	    func_warning "'-l' is ignored for archives/objects"
+	    continue
+	  fi
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
+	  if test lib = "$linkmode"; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib=$searchdir/lib$name$search_ext
+	      if test -f "$lib"; then
+		if test .la = "$search_ext"; then
+		  found=:
+		else
+		  found=false
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if $found; then
+	    # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if func_lalib_p "$lib"; then
+		  library_names=
+		  old_library=
+		  func_source "$lib"
+		  for l in $old_library $library_names; do
+		    ll=$l
+		  done
+		  if test "X$ll" = "X$old_library"; then # only static version available
+		    found=false
+		    func_dirname "$lib" "" "."
+		    ladir=$func_dirname_result
+		    lib=$ladir/$old_library
+		    if test prog,link = "$linkmode,$pass"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+		;;
+	      *) ;;
+	      esac
+	    fi
+	  else
+	    # deplib doesn't seem to be a libtool library
+	    if test prog,link = "$linkmode,$pass"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  fi
+	  ;; # -l
+	*.ltframework)
+	  if test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test lib = "$linkmode"; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test conv = "$pass" && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  prog)
+	    if test conv = "$pass"; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test scan = "$pass"; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  *)
+	    func_warning "'-L' is ignored for archives/objects"
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test link = "$pass"; then
+	    func_stripname '-R' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    dir=$func_resolve_sysroot_result
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) func_append xrpath " $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la)
+	  func_resolve_sysroot "$deplib"
+	  lib=$func_resolve_sysroot_result
+	  ;;
+	*.$libext)
+	  if test conv = "$pass"; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=false
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		    valid_a_lib=:
+		  fi
+		;;
+		pass_all)
+		  valid_a_lib=:
+		;;
+	      esac
+	      if $valid_a_lib; then
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      else
+		echo
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because the file extensions .$libext of this argument makes me believe"
+		echo "*** that it is just a static archive that I should not use here."
+	      fi
+	      ;;
+	    esac
+	    continue
+	    ;;
+	  prog)
+	    if test link != "$pass"; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test conv = "$pass"; then
+	    deplibs="$deplib $deplibs"
+	  elif test prog = "$linkmode"; then
+	    if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      func_append newdlprefiles " $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      func_append newdlfiles " $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=:
+	  continue
+	  ;;
+	esac # case $deplib
+
+	$found || test -f "$lib" \
+	  || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "'$lib' is not a valid libtool archive"
+
+	func_dirname "$lib" "" "."
+	ladir=$func_dirname_result
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	inherited_linker_flags=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	if test lib,link = "$linkmode,$pass" ||
+	   test prog,scan = "$linkmode,$pass" ||
+	   { test prog != "$linkmode" && test lib != "$linkmode"; }; then
+	  test -n "$dlopen" && func_append dlfiles " $dlopen"
+	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+	fi
+
+	if test conv = "$pass"; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      func_fatal_error "cannot find name of link library for '$lib'"
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    func_append convenience " $ladir/$objdir/$old_library"
+	    func_append old_convenience " $ladir/$objdir/$old_library"
+	  elif test prog != "$linkmode" && test lib != "$linkmode"; then
+	    func_fatal_error "'$lib' is not a convenience library"
+	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if $opt_preserve_dup_deps; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	if test -n "$old_library" &&
+	   { test yes = "$prefer_static_libs" ||
+	     test built,no = "$prefer_static_libs,$installed"; }; then
+	  linklib=$old_library
+	else
+	  for l in $old_library $library_names; do
+	    linklib=$l
+	  done
+	fi
+	if test -z "$linklib"; then
+	  func_fatal_error "cannot find name of link library for '$lib'"
+	fi
+
+	# This library was specified with -dlopen.
+	if test dlopen = "$pass"; then
+	  test -z "$libdir" \
+	    && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
+	  if test -z "$dlname" ||
+	     test yes != "$dlopen_support" ||
+	     test no = "$build_libtool_libs"
+	  then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    func_append dlprefiles " $lib $dependency_libs"
+	  else
+	    func_append newdlfiles " $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    func_warning "cannot determine absolute directory name of '$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
+	    abs_ladir=$ladir
+	  fi
+	  ;;
+	esac
+	func_basename "$lib"
+	laname=$func_basename_result
+
+	# Find the relevant object directory and library name.
+	if test yes = "$installed"; then
+	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    func_warning "library '$lib' was moved."
+	    dir=$ladir
+	    absdir=$abs_ladir
+	    libdir=$abs_ladir
+	  else
+	    dir=$lt_sysroot$libdir
+	    absdir=$lt_sysroot$libdir
+	  fi
+	  test yes = "$hardcode_automatic" && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir=$ladir
+	    absdir=$abs_ladir
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  else
+	    dir=$ladir/$objdir
+	    absdir=$abs_ladir/$objdir
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  fi
+	fi # $installed = yes
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
+
+	# This library was specified with -dlpreopen.
+	if test dlpreopen = "$pass"; then
+	  if test -z "$libdir" && test prog = "$linkmode"; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
+	  fi
+	  case $host in
+	    # special handling for platforms with PE-DLLs.
+	    *cygwin* | *mingw* | *cegcc* )
+	      # Linker will automatically link against shared library if both
+	      # static and shared are present.  Therefore, ensure we extract
+	      # symbols from the import library if a shared library is present
+	      # (otherwise, the dlopen module name will be incorrect).  We do
+	      # this by putting the import library name into $newdlprefiles.
+	      # We recover the dlopen module name by 'saving' the la file
+	      # name in a special purpose variable, and (later) extracting the
+	      # dlname from the la file.
+	      if test -n "$dlname"; then
+	        func_tr_sh "$dir/$linklib"
+	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+	        func_append newdlprefiles " $dir/$linklib"
+	      else
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      fi
+	    ;;
+	    * )
+	      # Prefer using a static library (so that no silly _DYNAMIC symbols
+	      # are required to link).
+	      if test -n "$old_library"; then
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      # Otherwise, use the dlname, so that lt_dlopen finds it.
+	      elif test -n "$dlname"; then
+	        func_append newdlprefiles " $dir/$dlname"
+	      else
+	        func_append newdlprefiles " $dir/$linklib"
+	      fi
+	    ;;
+	  esac
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test lib = "$linkmode"; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test prog = "$linkmode" && test link != "$pass"; then
+	  func_append newlib_search_path " $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=false
+	  if test no != "$link_all_deplibs" || test -z "$library_names" ||
+	     test no = "$build_libtool_libs"; then
+	    linkalldeplibs=:
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) func_stripname '-L' '' "$deplib"
+	         func_resolve_sysroot "$func_stripname_result"
+	         func_append newlib_search_path " $func_resolve_sysroot_result"
+		 ;;
+	    esac
+	    # Need to link against all dependency_libs?
+	    if $linkalldeplibs; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if $opt_preserve_dup_deps; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test prog,link = "$linkmode,$pass"; then
+	  if test -n "$library_names" &&
+	     { { test no = "$prefer_static_libs" ||
+	         test built,yes = "$prefer_static_libs,$installed"; } ||
+	       test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
+	      # Make sure the rpath contains only unique directories.
+	      case $temp_rpath: in
+	      *"$absdir:"*) ;;
+	      *) func_append temp_rpath "$absdir:" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if $alldeplibs &&
+	     { test pass_all = "$deplibs_check_method" ||
+	       { test yes = "$build_libtool_libs" &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test built = "$use_static_libs" && test yes = "$installed"; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test no = "$use_static_libs" || test -z "$old_library"; }; then
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc* | *os2*)
+	      # No point in relinking DLLs because paths are not encoded
+	      func_append notinst_deplibs " $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test no = "$installed"; then
+	      func_append notinst_deplibs " $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule=$dlpremoduletest
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
+	    echo
+	    if test prog = "$linkmode"; then
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $ECHO "*** $linklib is not portable!"
+	  fi
+	  if test lib = "$linkmode" &&
+	     test yes = "$hardcode_into_libs"; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    shift
+	    realname=$1
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname=$dlname
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw* | *cegcc* | *os2*)
+	        func_arith $current - $age
+		major=$func_arith_result
+		versuffix=-$major
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname=$realname
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot=$soname
+	    func_basename "$soroot"
+	    soname=$func_basename_result
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      func_verbose "extracting exported symbol list from '$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      func_verbose "generating import library for '$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test prog = "$linkmode" || test relink != "$opt_mode"; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test no = "$hardcode_direct"; then
+		add=$dir/$linklib
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+		  *-*-sysv4*uw2*) add_dir=-L$dir ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir=-L$dir ;;
+		  *-*-darwin* )
+		    # if the lib is a (non-dlopened) module then we cannot
+		    # link against it, someone is ignoring the earlier warnings
+		    if /usr/bin/file -L $add 2> /dev/null |
+			 $GREP ": [^:]* bundle" >/dev/null; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library"; then
+			  echo
+			  echo "*** And there doesn't seem to be a static archive available"
+			  echo "*** The link will probably fail, sorry"
+			else
+			  add=$dir/$old_library
+			fi
+		      elif test -n "$old_library"; then
+			add=$dir/$old_library
+		      fi
+		    fi
+		esac
+	      elif test no = "$hardcode_minus_L"; then
+		case $host in
+		*-*-sunos*) add_shlibpath=$dir ;;
+		esac
+		add_dir=-L$dir
+		add=-l$name
+	      elif test no = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test yes = "$hardcode_direct" &&
+	         test no = "$hardcode_direct_absolute"; then
+		add=$dir/$linklib
+	      elif test yes = "$hardcode_minus_L"; then
+		add_dir=-L$absdir
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      func_append add_dir " -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add=-l$name
+	      elif test yes = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test yes != "$lib_linked"; then
+	      func_fatal_configuration "unsupported hardcode properties"
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test prog = "$linkmode"; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test yes != "$hardcode_direct" &&
+		 test yes != "$hardcode_minus_L" &&
+		 test yes = "$hardcode_shlibpath_var"; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) func_append finalize_shlibpath "$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test prog = "$linkmode" || test relink = "$opt_mode"; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test yes = "$hardcode_direct" &&
+	       test no = "$hardcode_direct_absolute"; then
+	      add=$libdir/$linklib
+	    elif test yes = "$hardcode_minus_L"; then
+	      add_dir=-L$libdir
+	      add=-l$name
+	    elif test yes = "$hardcode_shlibpath_var"; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) func_append finalize_shlibpath "$libdir:" ;;
+	      esac
+	      add=-l$name
+	    elif test yes = "$hardcode_automatic"; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib"; then
+		add=$inst_prefix_dir$libdir/$linklib
+	      else
+		add=$libdir/$linklib
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir=-L$libdir
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    func_append add_dir " -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add=-l$name
+	    fi
+
+	    if test prog = "$linkmode"; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test prog = "$linkmode"; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test unsupported != "$hardcode_direct"; then
+	    test -n "$old_library" && linklib=$old_library
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test yes = "$build_libtool_libs"; then
+	  # Not a shared library
+	  if test pass_all != "$deplibs_check_method"; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    echo
+	    $ECHO "*** Warning: This system cannot link to static lib archive $lib."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
+	    if test yes = "$module"; then
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** 'nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test no = "$build_old_libs"; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test lib = "$linkmode"; then
+	  if test -n "$dependency_libs" &&
+	     { test yes != "$hardcode_into_libs" ||
+	       test yes = "$build_old_libs" ||
+	       test yes = "$link_static"; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) func_append xrpath " $temp_xrpath";;
+		   esac;;
+	      *) func_append temp_deplibs " $libdir";;
+	      esac
+	    done
+	    dependency_libs=$temp_deplibs
+	  fi
+
+	  func_append newlib_search_path " $absdir"
+	  # Link against this library
+	  test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    case $deplib in
+              -L*) func_stripname '-L' '' "$deplib"
+                   func_resolve_sysroot "$func_stripname_result";;
+              *) func_resolve_sysroot "$deplib" ;;
+            esac
+	    if $opt_preserve_dup_deps; then
+	      case "$tmp_libs " in
+	      *" $func_resolve_sysroot_result "*)
+                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $func_resolve_sysroot_result"
+	  done
+
+	  if test no != "$link_all_deplibs"; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      path=
+	      case $deplib in
+	      -L*) path=$deplib ;;
+	      *.la)
+	        func_resolve_sysroot "$deplib"
+	        deplib=$func_resolve_sysroot_result
+	        func_dirname "$deplib" "" "."
+		dir=$func_dirname_result
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    func_warning "cannot determine absolute directory name of '$dir'"
+		    absdir=$dir
+		  fi
+		  ;;
+		esac
+		if $GREP "^installed=no" $deplib > /dev/null; then
+		case $host in
+		*-*-darwin*)
+		  depdepl=
+		  eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names"; then
+		    for tmp in $deplibrary_names; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$absdir/$objdir/$depdepl"; then
+		      depdepl=$absdir/$objdir/$depdepl
+		      darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`$OTOOL64 -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+		      func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
+		      path=
+		    fi
+		  fi
+		  ;;
+		*)
+		  path=-L$absdir/$objdir
+		  ;;
+		esac
+		else
+		  eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "'$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "'$deplib' seems to be moved"
+
+		  path=-L$absdir
+		fi
+		;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      if test link = "$pass"; then
+	if test prog = "$linkmode"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
+      dependency_libs=$newdependency_libs
+      if test dlpreopen = "$pass"; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test dlopen != "$pass"; then
+	test conv = "$pass" || {
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) func_append lib_search_path " $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	}
+
+	if test prog,link = "$linkmode,$pass"; then
+	  vars="compile_deplibs finalize_deplibs"
+	else
+	  vars=deplibs
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) func_append tmp_libs " $deplib" ;;
+	      esac
+	      ;;
+	    *) func_append tmp_libs " $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+
+      # Add Sun CC postdeps if required:
+      test CXX = "$tagname" && {
+        case $host_os in
+        linux*)
+          case `$CC -V 2>&1 | sed 5q` in
+          *Sun\ C*) # Sun C++ 5.9
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+
+        solaris*)
+          func_cc_basename "$CC"
+          case $func_cc_basename_result in
+          CC* | sunCC*)
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+        esac
+      }
+
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=
+	  ;;
+	esac
+	if test -n "$i"; then
+	  func_append tmp_libs " $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test prog = "$linkmode"; then
+      dlfiles=$newdlfiles
+    fi
+    if test prog = "$linkmode" || test lib = "$linkmode"; then
+      dlprefiles=$newdlprefiles
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for archives"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "'-l' and '-L' are ignored for archives" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "'-rpath' is ignored for archives"
+
+      test -n "$xrpath" && \
+	func_warning "'-R' is ignored for archives"
+
+      test -n "$vinfo" && \
+	func_warning "'-version-info/-version-number' is ignored for archives"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for archives"
+
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "'-export-symbols' is ignored for archives"
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs=$output
+      func_append objs "$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form 'libNAME.la'.
+      case $outputname in
+      lib*)
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	test no = "$module" \
+	  && func_fatal_help "libtool library '$output' must begin with 'lib'"
+
+	if test no != "$need_lib_prefix"; then
+	  # Add the "lib" prefix for modules if required
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test pass_all != "$deplibs_check_method"; then
+	  func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
+	else
+	  echo
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
+	  func_append libobjs " $objs"
+	fi
+      fi
+
+      test no = "$dlself" \
+	|| func_warning "'-dlopen self' is ignored for libtool libraries"
+
+      set dummy $rpath
+      shift
+      test 1 -lt "$#" \
+	&& func_warning "ignoring multiple '-rpath's for a libtool library"
+
+      install_libdir=$1
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test yes = "$build_libtool_libs"; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a '.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	test -n "$vinfo" && \
+	  func_warning "'-version-info/-version-number' is ignored for convenience libraries"
+
+	test -n "$release" && \
+	  func_warning "'-release' is ignored for convenience libraries"
+      else
+
+	# Parse the version information argument.
+	save_ifs=$IFS; IFS=:
+	set dummy $vinfo 0 0 0
+	shift
+	IFS=$save_ifs
+
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to '-version-info'"
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major=$1
+	  number_minor=$2
+	  number_revision=$3
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # that has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  # correct linux to gnu/linux during the next big refactor
+	  darwin|freebsd-elf|linux|osf|windows|none)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age=$number_minor
+	    revision=$number_revision
+	    ;;
+	  freebsd-aout|qnx|sunos)
+	    current=$number_major
+	    revision=$number_minor
+	    age=0
+	    ;;
+	  irix|nonstopux)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age=$number_minor
+	    revision=$number_minor
+	    lt_irix_increment=no
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current=$1
+	  revision=$2
+	  age=$3
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "CURRENT '$current' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "REVISION '$revision' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "AGE '$age' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  func_error "AGE '$age' is greater than the current interface number '$current'"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  # Darwin ld doesn't like 0 for these options...
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
+	  xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+          # On Darwin other compilers
+          case $CC in
+              nagfor*)
+                  verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+                  ;;
+              *)
+                  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+                  ;;
+          esac
+	  ;;
+
+	freebsd-aout)
+	  major=.$current
+	  versuffix=.$current.$revision
+	  ;;
+
+	freebsd-elf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  ;;
+
+	irix | nonstopux)
+	  if test no = "$lt_irix_increment"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring=$verstring_prefix$major.$revision
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test 0 -ne "$loop"; do
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring=$verstring_prefix$major.$iface:$verstring
+	  done
+
+	  # Before this point, $major must not contain '.'.
+	  major=.$major
+	  versuffix=$major.$revision
+	  ;;
+
+	linux) # correct to gnu/linux during the next big refactor
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  ;;
+
+	osf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=.$current.$age.$revision
+	  verstring=$current.$age.$revision
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test 0 -ne "$loop"; do
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring=$verstring:$iface.0
+	  done
+
+	  # Make executables depend on our current version.
+	  func_append verstring ":$current.0"
+	  ;;
+
+	qnx)
+	  major=.$current
+	  versuffix=.$current
+	  ;;
+
+	sco)
+	  major=.$current
+	  versuffix=.$current
+	  ;;
+
+	sunos)
+	  major=.$current
+	  versuffix=.$current.$revision
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 file systems.
+	  func_arith $current - $age
+	  major=$func_arith_result
+	  versuffix=-$major
+	  ;;
+
+	*)
+	  func_fatal_configuration "unknown library version type '$version_type'"
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring=0.0
+	    ;;
+	  esac
+	  if test no = "$need_version"; then
+	    versuffix=
+	  else
+	    versuffix=.0.0
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test yes,no = "$avoid_version,$need_version"; then
+	  major=
+	  versuffix=
+	  verstring=
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test yes = "$allow_undefined"; then
+	  if test unsupported = "$allow_undefined_flag"; then
+	    if test yes = "$build_old_libs"; then
+	      func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+	      build_libtool_libs=no
+	    else
+	      func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+	    fi
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag=$no_undefined_flag
+	fi
+
+      fi
+
+      func_generate_dlsyms "$libname" "$libname" :
+      func_append libobjs " $symfileobj"
+      test " " = "$libobjs" && libobjs=
+
+      if test relink != "$opt_mode"; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$ECHO "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext | *.gcno)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+	       if test -n "$precious_files_regex"; then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
+		   continue
+		 fi
+	       fi
+	       func_append removelist " $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
+      fi
+
+      # Now set the variables for building old libraries.
+      if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
+	func_append oldlibs " $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  func_replace_sysroot "$libdir"
+	  func_append temp_xrpath " -R$func_replace_sysroot_result"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+	if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles=$dlfiles
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) func_append dlfiles " $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles=$dlprefiles
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) func_append dlprefiles " $lib" ;;
+	esac
+      done
+
+      if test yes = "$build_libtool_libs"; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    func_append deplibs " System.ltframework"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test yes = "$build_libtool_need_lc"; then
+	      func_append deplibs " -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=
+	versuffix=
+	major=
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $opt_dry_run || $RM conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $opt_dry_run || $RM conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    func_append newdeplibs " $i"
+		    i=
+		    ;;
+		  esac
+		fi
+		if test -n "$i"; then
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+		    func_append newdeplibs " $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which I believe you do not have"
+		    echo "*** because a test_compile did reveal that the linker did not use it for"
+		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+		  ldd_output=`ldd conftest`
+		  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      func_append newdeplibs " $i"
+		      i=
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i"; then
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+		      func_append newdeplibs " $i"
+		    else
+		      droppeddeps=yes
+		      echo
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      echo "*** I have the capability to make that library automatically link in when"
+		      echo "*** you link to this library.  But I can only do this if you have a"
+		      echo "*** shared version of the library, which you do not appear to have"
+		      echo "*** because a test_compile did reveal that the linker did not use this one"
+		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "*** make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib"; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		if test -n "$file_magic_glob"; then
+		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+		else
+		  libnameglob=$libname
+		fi
+		test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  if test yes = "$want_nocaseglob"; then
+		    shopt -s nocaseglob
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		    $nocaseglob
+		  else
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		  fi
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib=$potent_lib
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+			*) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
+			func_append newdeplibs " $a_deplib"
+			a_deplib=
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib"; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib"; then
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib"; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib=$potent_lib # see symlink-check above in file_magic test
+		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
+		      func_append newdeplibs " $a_deplib"
+		      a_deplib=
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib"; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib"; then
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=
+	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+	  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	    for i in $predeps $postdeps; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
+	    done
+	  fi
+	  case $tmp_deplibs in
+	  *[!\	\ ]*)
+	    echo
+	    if test none = "$deplibs_check_method"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	    ;;
+	  esac
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+	  ;;
+	esac
+
+	if test yes = "$droppeddeps"; then
+	  if test yes = "$module"; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** 'nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test no = "$build_old_libs"; then
+	      oldlibs=$output_objdir/$libname.$libext
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+
+	    if test no = "$allow_undefined"; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test no = "$build_old_libs"; then
+		oldlibs=$output_objdir/$libname.$libext
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      deplibs=$new_libs
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test yes = "$build_libtool_libs"; then
+	# Remove $wl instances when linking with ld.
+	# FIXME: should test the right _cmds variable.
+	case $archive_cmds in
+	  *\$LD\ *) wl= ;;
+        esac
+	if test yes = "$hardcode_into_libs"; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath=$finalize_rpath
+	  test relink = "$opt_mode" || rpath=$compile_rpath$rpath
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		func_replace_sysroot "$libdir"
+		libdir=$func_replace_sysroot_result
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs=$libdir
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		func_append dep_rpath " $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append perm_rpath " $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir=$hardcode_libdirs
+	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      func_append rpath "$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath=$finalize_shlibpath
+	test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	shift
+	realname=$1
+	shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname=$realname
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
+
+	lib=$output_objdir/$realname
+	linknames=
+	for link
+	do
+	  func_append linknames " $link"
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols=$output_objdir/$libname.uexp
+	  func_append delfiles " $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    func_dll_def_p "$export_symbols" || {
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols=$export_symbols
+	      export_symbols=
+	      always_export_symbols=yes
+	    }
+	  fi
+	  ;;
+	esac
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for '$libname.la'"
+	    export_symbols=$output_objdir/$libname.exp
+	    $opt_dry_run || $RM $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs=$IFS; IFS='~'
+	    for cmd1 in $cmds; do
+	      IFS=$save_ifs
+	      # Take the normal branch if the nm_file_list_spec branch
+	      # doesn't work or if tool conversion is not needed.
+	      case $nm_file_list_spec~$to_tool_file_cmd in
+		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+		  try_normal_branch=yes
+		  eval cmd=\"$cmd1\"
+		  func_len " $cmd"
+		  len=$func_len_result
+		  ;;
+		*)
+		  try_normal_branch=no
+		  ;;
+	      esac
+	      if test yes = "$try_normal_branch" \
+		 && { test "$len" -lt "$max_cmd_len" \
+		      || test "$max_cmd_len" -le -1; }
+	      then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
+	      elif test -n "$nm_file_list_spec"; then
+		func_basename "$output"
+		output_la=$func_basename_result
+		save_libobjs=$libobjs
+		save_output=$output
+		output=$output_objdir/$output_la.nm
+		func_to_tool_file "$output"
+		libobjs=$nm_file_list_spec$func_to_tool_file_result
+		func_append delfiles " $output"
+		func_verbose "creating $NM input file list: $output"
+		for obj in $save_libobjs; do
+		  func_to_tool_file "$obj"
+		  $ECHO "$func_to_tool_file_result"
+		done > "$output"
+		eval cmd=\"$cmd1\"
+		func_show_eval "$cmd" 'exit $?'
+		output=$save_output
+		libobjs=$save_libobjs
+		skipped_export=false
+	      else
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS=$save_ifs
+	    if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  tmp_export_symbols=$export_symbols
+	  test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
+	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands, which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	fi
+
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    func_append tmp_deplibs " $test_deplib"
+	    ;;
+	  esac
+	done
+	deplibs=$tmp_deplibs
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test yes = "$compiler_needs_object" &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  else
+	    gentop=$output_objdir/${outputname}x
+	    func_append generated " $gentop"
+
+	    func_extract_archives $gentop $convenience
+	    func_append libobjs " $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	fi
+
+	if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  func_append linker_flags " $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test relink = "$opt_mode"; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test yes = "$module" && test -n "$module_cmds"; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
+	  fi
+	fi
+
+	if test : != "$skipped_export" &&
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  func_basename "$output"
+	  output_la=$func_basename_result
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  last_robj=
+	  k=1
+
+	  if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+	    output=$output_objdir/$output_la.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    echo 'INPUT (' > $output
+	    for obj in $save_libobjs
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    echo ')' >> $output
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$func_to_tool_file_result
+	  elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+	    output=$output_objdir/$output_la.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test yes = "$compiler_needs_object"; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-$k.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test -z "$objlist" ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test 1 -eq "$k"; then
+		    # The first file doesn't have a previous command to add.
+		    reload_objs=$objlist
+		    eval concat_cmds=\"$reload_cmds\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    reload_objs="$objlist $last_robj"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-$k.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-$k.$objext
+		  objlist=" $obj"
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      reload_objs="$objlist $last_robj"
+	      eval concat_cmds=\"\$concat_cmds$reload_cmds\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	      func_append delfiles " $output"
+
+	    else
+	      output=
+	    fi
+
+	    ${skipped_export-false} && {
+	      func_verbose "generating symbol list for '$libname.la'"
+	      export_symbols=$output_objdir/$libname.exp
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	    }
+
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
+
+	    # Loop through the commands generated above and execute them.
+	    save_ifs=$IFS; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS=$save_ifs
+	      $opt_quiet || {
+		  func_quote_for_expand "$cmd"
+		  eval "func_echo $func_quote_for_expand_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test relink = "$opt_mode"; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
+
+		exit $lt_exit
+	      }
+	    done
+	    IFS=$save_ifs
+
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+
+          ${skipped_export-false} && {
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols=$export_symbols
+	      test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
+	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands, which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  }
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test yes = "$module" && test -n "$module_cmds"; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
+	    fi
+	  fi
+	fi
+
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append libobjs " $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
+	fi
+
+	save_ifs=$IFS; IFS='~'
+	for cmd in $cmds; do
+	  IFS=$sp$nl
+	  eval cmd=\"$cmd\"
+	  IFS=$save_ifs
+	  $opt_quiet || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test relink = "$opt_mode"; then
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
+	    fi
+
+	    exit $lt_exit
+	  }
+	done
+	IFS=$save_ifs
+
+	# Restore the uninstalled library and exit
+	if test relink = "$opt_mode"; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      func_show_eval '${RM}r "$gentop"'
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test yes = "$module" || test yes = "$export_dynamic"; then
+	  # On all known operating systems, these are identical.
+	  dlname=$soname
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for objects"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "'-l' and '-L' are ignored for objects" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "'-rpath' is ignored for objects"
+
+      test -n "$xrpath" && \
+	func_warning "'-R' is ignored for objects"
+
+      test -n "$vinfo" && \
+	func_warning "'-version-info' is ignored for objects"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for objects"
+
+      case $output in
+      *.lo)
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object '$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
+	;;
+      *)
+	libobj=
+	obj=$output
+	;;
+      esac
+
+      # Delete the old objects.
+      $opt_dry_run || $RM $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # if reload_cmds runs $LD directly, get rid of -Wl from
+      # whole_archive_flag_spec and hope we can get by with turning comma
+      # into space.
+      case $reload_cmds in
+        *\$LD[\ \$]*) wl= ;;
+      esac
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	  reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
+	else
+	  gentop=$output_objdir/${obj}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+	fi
+      fi
+
+      # If we're not building shared, we need to use non_pic_objs
+      test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
+
+      # Create the old-style object.
+      reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
+
+      output=$obj
+      func_execute_cmds "$reload_cmds" 'exit $?'
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      test yes = "$build_libtool_libs" || {
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      }
+
+      if test -n "$pic_flag" || test default != "$pic_mode"; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output=$libobj
+	func_execute_cmds "$reload_cmds" 'exit $?'
+      fi
+
+      if test -n "$gentop"; then
+	func_show_eval '${RM}r "$gentop"'
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
+      esac
+      test -n "$vinfo" && \
+	func_warning "'-version-info' is ignored for programs"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for programs"
+
+      $preload \
+	&& test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+	&& func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	;;
+      esac
+
+      case $host in
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test CXX = "$tagname"; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      func_append compile_command " $wl-bind_at_load"
+	      func_append finalize_command " $wl-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      compile_deplibs=$new_libs
+
+
+      func_append compile_command " $compile_deplibs"
+      func_append finalize_command " $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs=$libdir
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append perm_rpath " $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
+	  *) func_append dllsearchpath ":$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir=$hardcode_libdirs
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath=$rpath
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs=$libdir
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_perm_rpath " $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir=$hardcode_libdirs
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath=$rpath
+
+      if test -n "$libobjs" && test yes = "$build_old_libs"; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+      fi
+
+      func_generate_dlsyms "$outputname" "@PROGRAM@" false
+
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
+      fi
+
+      wrappers_required=:
+      case $host in
+      *cegcc* | *mingw32ce*)
+        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+        wrappers_required=false
+        ;;
+      *cygwin* | *mingw* )
+        test yes = "$build_libtool_libs" || wrappers_required=false
+        ;;
+      *)
+        if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+          wrappers_required=false
+        fi
+        ;;
+      esac
+      $wrappers_required || {
+	# Replace the output file specification.
+	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	link_command=$compile_command$compile_rpath
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	# Delete the generated files.
+	if test -f "$output_objdir/${outputname}S.$objext"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
+	fi
+
+	exit $exit_status
+      }
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test yes = "$no_install"; then
+	# We don't need to create a wrapper script.
+	link_command=$compile_var$compile_command$compile_rpath
+	# Replace the output file specification.
+	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$opt_dry_run || $RM $output
+	# Link the executable and exit
+	func_show_eval "$link_command" 'exit $?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      case $hardcode_action,$fast_install in
+        relink,*)
+	  # Fast installation is not supported
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
+
+	  func_warning "this platform does not like uninstalled shared libraries"
+	  func_warning "'$output' will be relinked during installation"
+	  ;;
+        *,yes)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+          ;;
+	*,no)
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
+          ;;
+	*,needless)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=
+          ;;
+      esac
+
+      # Replace the output file specification.
+      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      func_show_eval "$link_command" 'exit $?'
+
+      if test -n "$postlink_cmds"; then
+	func_to_tool_file "$output_objdir/$outputname"
+	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	func_execute_cmds "$postlink_cmds" 'exit $?'
+      fi
+
+      # Now create the wrapper script.
+      func_verbose "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    func_quote_for_eval "$var_value"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
+	  *) exeext= ;;
+	esac
+	case $host in
+	  *cygwin* | *mingw* )
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource=$output_path/$objdir/lt-$output_name.c
+	    cwrapper=$output_path/$output_name.exe
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
+
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host"; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
+	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_wrapper no > $output
+	    chmod +x $output
+	  ;;
+	esac
+      }
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      case $build_libtool_libs in
+        convenience)
+	  oldobjs="$libobjs_save $symfileobj"
+	  addlibs=$convenience
+	  build_libtool_libs=no
+	  ;;
+	module)
+	  oldobjs=$libobjs_save
+	  addlibs=$old_convenience
+	  build_libtool_libs=no
+          ;;
+	*)
+	  oldobjs="$old_deplibs $non_pic_objects"
+	  $preload && test -f "$symfileobj" \
+	    && func_append oldobjs " $symfileobj"
+	  addlibs=$old_convenience
+	  ;;
+      esac
+
+      if test -n "$addlibs"; then
+	gentop=$output_objdir/${outputname}x
+	func_append generated " $gentop"
+
+	func_extract_archives $gentop $addlibs
+	func_append oldobjs " $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
+	cmds=$old_archive_from_new_cmds
+      else
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append oldobjs " $func_extract_archives_result"
+	fi
+
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  echo "copying selected object files to avoid basename conflicts..."
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+	  func_mkdir_p "$gentop"
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    func_basename "$obj"
+	    objbase=$func_basename_result
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		func_arith $counter + 1
+		counter=$func_arith_result
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      func_append oldobjs " $gentop/$newobj"
+	      ;;
+	    *) func_append oldobjs " $obj" ;;
+	    esac
+	  done
+	fi
+	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+	tool_oldlib=$func_to_tool_file_result
+	eval cmds=\"$old_archive_cmds\"
+
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	elif test -n "$archiver_list_spec"; then
+	  func_verbose "using command file archive linking..."
+	  for obj in $oldobjs
+	  do
+	    func_to_tool_file "$obj"
+	    $ECHO "$func_to_tool_file_result"
+	  done > $output_objdir/$libname.libcmd
+	  func_to_tool_file "$output_objdir/$libname.libcmd"
+	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  func_verbose "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
+	  for obj in $save_oldobjs
+	  do
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj"; then
+		RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
+	      objlist=
+	      len=$len0
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test -z "$oldobjs"; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      func_execute_cmds "$cmds" 'exit $?'
+    done
+
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test yes = "$build_old_libs" && old_library=$libname.$libext
+      func_verbose "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  func_quote_for_eval "$var_value"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      if test yes = "$hardcode_automatic"; then
+	relink_command=
+      fi
+
+      # Only create the output if not a dry run.
+      $opt_dry_run || {
+	for installed in no yes; do
+	  if test yes = "$installed"; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output=$output_objdir/${outputname}i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		func_basename "$deplib"
+		name=$func_basename_result
+		func_resolve_sysroot "$deplib"
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+		test -z "$libdir" && \
+		  func_fatal_error "'$deplib' is not a valid libtool archive"
+		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      -L*)
+		func_stripname -L '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -L$func_replace_sysroot_result"
+		;;
+	      -R*)
+		func_stripname -R '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -R$func_replace_sysroot_result"
+		;;
+	      *) func_append newdependency_libs " $deplib" ;;
+	      esac
+	    done
+	    dependency_libs=$newdependency_libs
+	    newdlfiles=
+
+	    for lib in $dlfiles; do
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "'$lib' is not a valid libtool archive"
+		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      *) func_append newdlfiles " $lib" ;;
+	      esac
+	    done
+	    dlfiles=$newdlfiles
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "'$lib' is not a valid libtool archive"
+		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      esac
+	    done
+	    dlprefiles=$newdlprefiles
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlfiles " $abs"
+	    done
+	    dlfiles=$newdlfiles
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlprefiles " $abs"
+	    done
+	    dlprefiles=$newdlprefiles
+	  fi
+	  $RM $output
+	  # place dlname in correct position for cygwin
+	  # In fact, it would be nice if we could use this code for all target
+	  # systems that can't hard-code library paths into their executables
+	  # and that have no shared library path variable independent of PATH,
+	  # but it turns out we can't easily determine that from inspecting
+	  # libtool variables, so we have to hard-code the OSs to which it
+	  # applies here; at the moment, that means platforms that use the PE
+	  # object format with DLL files.  See the long comment at the top of
+	  # tests/bindir.at for full details.
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+	      # If a -bindir argument was supplied, place the dll there.
+	      if test -n "$bindir"; then
+		func_relative_path "$install_libdir" "$bindir"
+		tdlname=$func_relative_path_result/$dlname
+	      else
+		# Otherwise fall back on heuristic.
+		tdlname=../bin/$dlname
+	      fi
+	      ;;
+	  esac
+	  $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that cannot go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test no,yes = "$installed,$need_relink"; then
+	    $ECHO >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      }
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+}
+
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+  func_mode_link ${1+"$@"}
+fi
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $debug_cmd
+
+    RM=$nonopt
+    files=
+    rmforce=false
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic=$magic
+
+    for arg
+    do
+      case $arg in
+      -f) func_append RM " $arg"; rmforce=: ;;
+      -*) func_append RM " $arg" ;;
+      *) func_append files " $arg" ;;
+      esac
+    done
+
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
+
+    rmdirs=
+
+    for file in $files; do
+      func_dirname "$file" "" "."
+      dir=$func_dirname_result
+      if test . = "$dir"; then
+	odir=$objdir
+      else
+	odir=$dir/$objdir
+      fi
+      func_basename "$file"
+      name=$func_basename_result
+      test uninstall = "$opt_mode" && odir=$dir
+
+      # Remember odir for removal later, being careful to avoid duplicates
+      if test clean = "$opt_mode"; then
+	case " $rmdirs " in
+	  *" $odir "*) ;;
+	  *) func_append rmdirs " $odir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif $rmforce; then
+	continue
+      fi
+
+      rmfiles=$file
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    func_append rmfiles " $odir/$n"
+	  done
+	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+	  case $opt_mode in
+	  clean)
+	    case " $library_names " in
+	    *" $dlname "*) ;;
+	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+	    esac
+	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if func_lalib_p "$file"; then
+
+	  # Read the .lo file
+	  func_source $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" && test none != "$pic_object"; then
+	    func_append rmfiles " $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" && test none != "$non_pic_object"; then
+	    func_append rmfiles " $dir/$non_pic_object"
+	  fi
+	fi
+	;;
+
+      *)
+	if test clean = "$opt_mode"; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    func_append rmfiles " $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      func_append rmfiles " $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+	    if test yes = "$fast_install" && test -n "$relink_command"; then
+	      func_append rmfiles " $odir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name"; then
+	      func_append rmfiles " $odir/lt-$noexename.c"
+	    fi
+	  fi
+	fi
+	;;
+      esac
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
+    done
+
+    # Try to remove the $objdir's in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
+      fi
+    done
+
+    exit $exit_status
+}
+
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+  func_mode_uninstall ${1+"$@"}
+fi
+
+test -z "$opt_mode" && {
+  help=$generic_help
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode '$opt_mode'"
+
+if test -n "$exec_cmd"; then
+  eval exec "$exec_cmd"
+  exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# where we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/build-aux/missing b/build-aux/missing
new file mode 100755
index 0000000000..625aeb1189
--- /dev/null
+++ b/build-aux/missing
@@ -0,0 +1,215 @@
+#! /bin/sh
+# Common wrapper for a few potentially missing GNU programs.
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try '$0 --help' for more information"
+  exit 1
+fi
+
+case $1 in
+
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
+
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+
+Supported PROGRAM values:
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=https://www.perl.org/
+flex_URL=https://github.com/westes/flex
+gnu_software_URL=https://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'autom4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
+    ;;
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build-aux/syntax-check.mk b/build-aux/syntax-check.mk
index b2f4bf59f8..06ce489ea4 100644
--- a/build-aux/syntax-check.mk
+++ b/build-aux/syntax-check.mk
@@ -151,7 +151,7 @@ endif
 
 # Files that should never cause syntax check failures.
 VC_LIST_ALWAYS_EXCLUDE_REGEX = \
-  (^(docs/(news(-[0-9]*)?\.html\.in|.*\.patch))|\.(po|fig|gif|ico|png))$$
+  (^(docs/(news(-[0-9]*)?\.html\.in|.*\.patch)|(m4|gnulib|build-aux)/.*|configure|config\.h\.in|aclocal\.m4)|\.(po|fig|gif|ico|png)|Makefile.in)$$
 
 # Functions like free() that are no-ops on NULL arguments.
 useless_free_options = \
@@ -1963,12 +1963,6 @@ sc_makefile_TAB_only_indentation:
 	halt='found TAB-8-space indentation'				\
 	  $(_sc_search_regexp)
 
-sc_m4_quote_check:
-	@prohibit='(AC_DEFINE(_UNQUOTED)?|AC_DEFUN)\([^[]'		\
-	in_vc_files='(^configure\.ac|\.m4)$$'				\
-	halt='quote the first arg to AC_DEF*'				\
-	  $(_sc_search_regexp)
-
 gen_source_files:
 	$(MAKE) -C src generated-sources
 
@@ -2170,20 +2164,20 @@ prohibit-duplicate-header:
 	$(PYTHON) $(top_srcdir)/scripts/prohibit-duplicate-header.py
 
 spacing-check:
-	$(AM_V_GEN)$(VC_LIST) | $(GREP) '\.c$$' | xargs \
+	$(AM_V_GEN)$(VC_LIST_EXCEPT) | $(GREP) '\.c$$' | xargs \
 	$(PERL) $(top_srcdir)/build-aux/check-spacing.pl || \
 	  { echo '$(ME): incorrect formatting' 1>&2; exit 1; }
 
 mock-noinline:
-	$(AM_V_GEN)$(VC_LIST) | $(GREP) '\.[ch]$$' | $(RUNUTF8) xargs \
+	$(AM_V_GEN)$(VC_LIST_EXCEPT) | $(GREP) '\.[ch]$$' | $(RUNUTF8) xargs \
 	$(PYTHON) $(top_srcdir)/scripts/mock-noinline.py
 
 header-ifdef:
-	$(AM_V_GEN)$(VC_LIST) | $(GREP) '\.[h]$$' | $(RUNUTF8) xargs \
+	$(AM_V_GEN)$(VC_LIST_EXCEPT) | $(GREP) '\.[h]$$' | $(RUNUTF8) xargs \
 	$(PYTHON) $(top_srcdir)/scripts/header-ifdef.py
 
 test-wrap-argv:
-	$(AM_V_GEN)$(VC_LIST) | $(GREP) -E '\.(ldargs|args)' | $(RUNUTF8) xargs \
+	$(AM_V_GEN)$(VC_LIST_EXCEPT) | $(GREP) -E '\.(ldargs|args)' | $(RUNUTF8) xargs \
 	$(PYTHON) $(top_srcdir)/scripts/test-wrap-argv.py --check
 
 group-qemu-caps:
@@ -2305,8 +2299,6 @@ exclude_file_name_regexp--sc_size_of_brackets = build-aux/syntax-check\.mk
 exclude_file_name_regexp--sc_correct_id_types = \
   (^src/locking/lock_protocol.x$$)
 
-exclude_file_name_regexp--sc_m4_quote_check = m4/virt-lib.m4
-
 exclude_file_name_regexp--sc_prohibit_include_public_headers_quote = \
   ^(src/internal\.h$$|tools/wireshark/src/packet-libvirt.c$$)
 
@@ -2360,3 +2352,6 @@ exclude_file_name_regexp--sc_prohibit_strcmp = \
 
 exclude_file_name_regexp--sc_prohibit_backslash_alignment = \
   ^build-aux/syntax-check\.mk$$
+
+exclude_file_name_regexp--sc_TAB_in_indentation = \
+  ^(.*Makefile.in|build-aux/.*|config.h.in)$$
diff --git a/build-aux/test-driver b/build-aux/test-driver
new file mode 100755
index 0000000000..b8521a482e
--- /dev/null
+++ b/build-aux/test-driver
@@ -0,0 +1,148 @@
+#! /bin/sh
+# test-driver - basic testsuite driver script.
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 2011-2018 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+# Make unconditional expansion of undefined variables an error.  This
+# helps a lot in preventing typo-related bugs.
+set -u
+
+usage_error ()
+{
+  echo "$0: $*" >&2
+  print_usage >&2
+  exit 2
+}
+
+print_usage ()
+{
+  cat <<END
+Usage:
+  test-driver --test-name=NAME --log-file=PATH --trs-file=PATH
+              [--expect-failure={yes|no}] [--color-tests={yes|no}]
+              [--enable-hard-errors={yes|no}] [--]
+              TEST-SCRIPT [TEST-SCRIPT-ARGUMENTS]
+The '--test-name', '--log-file' and '--trs-file' options are mandatory.
+END
+}
+
+test_name= # Used for reporting.
+log_file=  # Where to save the output of the test script.
+trs_file=  # Where to save the metadata of the test run.
+expect_failure=no
+color_tests=no
+enable_hard_errors=yes
+while test $# -gt 0; do
+  case $1 in
+  --help) print_usage; exit $?;;
+  --version) echo "test-driver $scriptversion"; exit $?;;
+  --test-name) test_name=$2; shift;;
+  --log-file) log_file=$2; shift;;
+  --trs-file) trs_file=$2; shift;;
+  --color-tests) color_tests=$2; shift;;
+  --expect-failure) expect_failure=$2; shift;;
+  --enable-hard-errors) enable_hard_errors=$2; shift;;
+  --) shift; break;;
+  -*) usage_error "invalid option: '$1'";;
+   *) break;;
+  esac
+  shift
+done
+
+missing_opts=
+test x"$test_name" = x && missing_opts="$missing_opts --test-name"
+test x"$log_file"  = x && missing_opts="$missing_opts --log-file"
+test x"$trs_file"  = x && missing_opts="$missing_opts --trs-file"
+if test x"$missing_opts" != x; then
+  usage_error "the following mandatory options are missing:$missing_opts"
+fi
+
+if test $# -eq 0; then
+  usage_error "missing argument"
+fi
+
+if test $color_tests = yes; then
+  # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
+  red='' # Red.
+  grn='' # Green.
+  lgn='' # Light green.
+  blu='' # Blue.
+  mgn='' # Magenta.
+  std=''     # No color.
+else
+  red= grn= lgn= blu= mgn= std=
+fi
+
+do_exit='rm -f $log_file $trs_file; (exit $st); exit $st'
+trap "st=129; $do_exit" 1
+trap "st=130; $do_exit" 2
+trap "st=141; $do_exit" 13
+trap "st=143; $do_exit" 15
+
+# Test script is run here.
+"$@" >$log_file 2>&1
+estatus=$?
+
+if test $enable_hard_errors = no && test $estatus -eq 99; then
+  tweaked_estatus=1
+else
+  tweaked_estatus=$estatus
+fi
+
+case $tweaked_estatus:$expect_failure in
+  0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
+  0:*)   col=$grn res=PASS  recheck=no  gcopy=no;;
+  77:*)  col=$blu res=SKIP  recheck=no  gcopy=yes;;
+  99:*)  col=$mgn res=ERROR recheck=yes gcopy=yes;;
+  *:yes) col=$lgn res=XFAIL recheck=no  gcopy=yes;;
+  *:*)   col=$red res=FAIL  recheck=yes gcopy=yes;;
+esac
+
+# Report the test outcome and exit status in the logs, so that one can
+# know whether the test passed or failed simply by looking at the '.log'
+# file, without the need of also peaking into the corresponding '.trs'
+# file (automake bug#11814).
+echo "$res $test_name (exit status: $estatus)" >>$log_file
+
+# Report outcome to console.
+echo "${col}${res}${std}: $test_name"
+
+# Register the test result, and other relevant metadata.
+echo ":test-result: $res" > $trs_file
+echo ":global-test-result: $res" >> $trs_file
+echo ":recheck: $recheck" >> $trs_file
+echo ":copy-in-global-log: $gcopy" >> $trs_file
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/config.h.in b/config.h.in
new file mode 100644
index 0000000000..f199396fa8
--- /dev/null
+++ b/config.h.in
@@ -0,0 +1,2303 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define if building universal (internal helper macro) */
+#undef AC_APPLE_UNIVERSAL_BUILD
+
+/* Location of addr2line program */
+#undef ADDR2LINE
+
+/* path to apparmor directory */
+#undef APPARMOR_DIR
+
+/* path to kernel profiles */
+#undef APPARMOR_PROFILES_PATH
+
+/* Location of the bhyve tool */
+#undef BHYVE
+
+/* Location of the bhyvectl tool */
+#undef BHYVECTL
+
+/* Location of the bhyveload tool */
+#undef BHYVELOAD
+
+/* Define to the number of bits in type 'ptrdiff_t'. */
+#undef BITSIZEOF_PTRDIFF_T
+
+/* Define to the number of bits in type 'sig_atomic_t'. */
+#undef BITSIZEOF_SIG_ATOMIC_T
+
+/* Define to the number of bits in type 'size_t'. */
+#undef BITSIZEOF_SIZE_T
+
+/* Define to the number of bits in type 'wchar_t'. */
+#undef BITSIZEOF_WCHAR_T
+
+/* Define to the number of bits in type 'wint_t'. */
+#undef BITSIZEOF_WINT_T
+
+/* Define to 1 if gcc -Wlogical-op reports false positive 'or' equal expr */
+#undef BROKEN_GCC_WLOGICALOP_EQUAL_EXPR
+
+/* Define to 1 if chown fails to change ctime when at least one argument was
+   not -1. */
+#undef CHOWN_CHANGE_TIME_BUG
+
+/* Define if chown is not POSIX compliant regarding IDs of -1. */
+#undef CHOWN_FAILS_TO_HONOR_ID_OF_NEGATIVE_ONE
+
+/* Define if chown modifies symlinks. */
+#undef CHOWN_MODIFIES_SYMLINK
+
+/* Define to 1 if chown mishandles trailing slash. */
+#undef CHOWN_TRAILING_SLASH_BUG
+
+/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
+   systems. This function is required for `alloca.c' support on those systems.
+   */
+#undef CRAY_STACKSEG_END
+
+/* Define to 1 if using `alloca.c'. */
+#undef C_ALLOCA
+
+/* Define as the bit index in the word where to find bit 0 of the exponent of
+   'double'. */
+#undef DBL_EXPBIT0_BIT
+
+/* Define as the word index where to find the exponent of 'double'. */
+#undef DBL_EXPBIT0_WORD
+
+/* Default editor to use */
+#undef DEFAULT_EDITOR
+
+/* List of loader:nvram pairs */
+#undef DEFAULT_LOADER_NVRAM
+
+/* Location or name of the dmidecode program */
+#undef DMIDECODE
+
+/* Location or name of the dnsmasq program */
+#undef DNSMASQ
+
+/* path to ebtables binary */
+#undef EBTABLES_PATH
+
+/* whether debugging is enabled */
+#undef ENABLE_DEBUG
+
+/* Define this to 1 if F_DUPFD behavior does not match POSIX */
+#undef FCNTL_DUPFD_BUGGY
+
+/* Enable compile-time and run-time bounds-checking, and some warnings,
+        without upsetting newer glibc. */
+     #if !defined _FORTIFY_SOURCE && defined __OPTIMIZE__ && __OPTIMIZE__
+     # define _FORTIFY_SOURCE 2
+     #endif
+    
+
+/* Define to 1 if pthread_sigmask is not a real function */
+#undef FUNC_PTHREAD_SIGMASK_BROKEN
+
+/* Define to the type of elements in the array set by `getgroups'. Usually
+   this is either `int' or `gid_t'. */
+#undef GETGROUPS_T
+
+/* Define this to 1 if getgroups(0,NULL) does not return the number of groups.
+   */
+#undef GETGROUPS_ZERO_BUG
+
+/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
+   whether the gnulib module fscanf shall be considered present. */
+#undef GNULIB_FSCANF
+
+/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
+   whether the gnulib module msvc-nothrow shall be considered present. */
+#undef GNULIB_MSVC_NOTHROW
+
+/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
+   whether the gnulib module nonblocking shall be considered present. */
+#undef GNULIB_NONBLOCKING
+
+/* Define to 1 if printf and friends should be labeled with attribute
+   "__gnu_printf__" instead of "__printf__" */
+#undef GNULIB_PRINTF_ATTRIBUTE_FLAVOR_GNU
+
+/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
+   whether the gnulib module scanf shall be considered present. */
+#undef GNULIB_SCANF
+
+/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
+   whether the gnulib module sigpipe shall be considered present. */
+#undef GNULIB_SIGPIPE
+
+/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
+   whether the gnulib module snprintf shall be considered present. */
+#undef GNULIB_SNPRINTF
+
+/* Define to 1 when the gnulib module accept should be tested. */
+#undef GNULIB_TEST_ACCEPT
+
+/* Define to 1 when the gnulib module bind should be tested. */
+#undef GNULIB_TEST_BIND
+
+/* Define to 1 when the gnulib module chown should be tested. */
+#undef GNULIB_TEST_CHOWN
+
+/* Define to 1 when the gnulib module cloexec should be tested. */
+#undef GNULIB_TEST_CLOEXEC
+
+/* Define to 1 when the gnulib module close should be tested. */
+#undef GNULIB_TEST_CLOSE
+
+/* Define to 1 when the gnulib module connect should be tested. */
+#undef GNULIB_TEST_CONNECT
+
+/* Define to 1 when the gnulib module dup2 should be tested. */
+#undef GNULIB_TEST_DUP2
+
+/* Define to 1 when the gnulib module environ should be tested. */
+#undef GNULIB_TEST_ENVIRON
+
+/* Define to 1 when the gnulib module fcntl should be tested. */
+#undef GNULIB_TEST_FCNTL
+
+/* Define to 1 when the gnulib module fseek should be tested. */
+#undef GNULIB_TEST_FSEEK
+
+/* Define to 1 when the gnulib module fseeko should be tested. */
+#undef GNULIB_TEST_FSEEKO
+
+/* Define to 1 when the gnulib module fstat should be tested. */
+#undef GNULIB_TEST_FSTAT
+
+/* Define to 1 when the gnulib module getaddrinfo should be tested. */
+#undef GNULIB_TEST_GETADDRINFO
+
+/* Define to 1 when the gnulib module getdelim should be tested. */
+#undef GNULIB_TEST_GETDELIM
+
+/* Define to 1 when the gnulib module getdtablesize should be tested. */
+#undef GNULIB_TEST_GETDTABLESIZE
+
+/* Define to 1 when the gnulib module getgroups should be tested. */
+#undef GNULIB_TEST_GETGROUPS
+
+/* Define to 1 when the gnulib module gethostname should be tested. */
+#undef GNULIB_TEST_GETHOSTNAME
+
+/* Define to 1 when the gnulib module getline should be tested. */
+#undef GNULIB_TEST_GETLINE
+
+/* Define to 1 when the gnulib module getpass should be tested. */
+#undef GNULIB_TEST_GETPASS
+
+/* Define to 1 when the gnulib module getpeername should be tested. */
+#undef GNULIB_TEST_GETPEERNAME
+
+/* Define to 1 when the gnulib module getsockname should be tested. */
+#undef GNULIB_TEST_GETSOCKNAME
+
+/* Define to 1 when the gnulib module ioctl should be tested. */
+#undef GNULIB_TEST_IOCTL
+
+/* Define to 1 when the gnulib module listen should be tested. */
+#undef GNULIB_TEST_LISTEN
+
+/* Define to 1 when the gnulib module localeconv should be tested. */
+#undef GNULIB_TEST_LOCALECONV
+
+/* Define to 1 when the gnulib module lseek should be tested. */
+#undef GNULIB_TEST_LSEEK
+
+/* Define to 1 when the gnulib module malloc-posix should be tested. */
+#undef GNULIB_TEST_MALLOC_POSIX
+
+/* Define to 1 when the gnulib module memchr should be tested. */
+#undef GNULIB_TEST_MEMCHR
+
+/* Define to 1 when the gnulib module nonblocking should be tested. */
+#undef GNULIB_TEST_NONBLOCKING
+
+/* Define to 1 when the gnulib module open should be tested. */
+#undef GNULIB_TEST_OPEN
+
+/* Define to 1 when the gnulib module openpty should be tested. */
+#undef GNULIB_TEST_OPENPTY
+
+/* Define to 1 when the gnulib module pipe should be tested. */
+#undef GNULIB_TEST_PIPE
+
+/* Define to 1 when the gnulib module pipe2 should be tested. */
+#undef GNULIB_TEST_PIPE2
+
+/* Define to 1 when the gnulib module poll should be tested. */
+#undef GNULIB_TEST_POLL
+
+/* Define to 1 when the gnulib module posix_openpt should be tested. */
+#undef GNULIB_TEST_POSIX_OPENPT
+
+/* Define to 1 when the gnulib module pthread_sigmask should be tested. */
+#undef GNULIB_TEST_PTHREAD_SIGMASK
+
+/* Define to 1 when the gnulib module raise should be tested. */
+#undef GNULIB_TEST_RAISE
+
+/* Define to 1 when the gnulib module rawmemchr should be tested. */
+#undef GNULIB_TEST_RAWMEMCHR
+
+/* Define to 1 when the gnulib module realloc-posix should be tested. */
+#undef GNULIB_TEST_REALLOC_POSIX
+
+/* Define to 1 when the gnulib module recv should be tested. */
+#undef GNULIB_TEST_RECV
+
+/* Define to 1 when the gnulib module select should be tested. */
+#undef GNULIB_TEST_SELECT
+
+/* Define to 1 when the gnulib module send should be tested. */
+#undef GNULIB_TEST_SEND
+
+/* Define to 1 when the gnulib module setsockopt should be tested. */
+#undef GNULIB_TEST_SETSOCKOPT
+
+/* Define to 1 when the gnulib module sigaction should be tested. */
+#undef GNULIB_TEST_SIGACTION
+
+/* Define to 1 when the gnulib module sigprocmask should be tested. */
+#undef GNULIB_TEST_SIGPROCMASK
+
+/* Define to 1 when the gnulib module snprintf should be tested. */
+#undef GNULIB_TEST_SNPRINTF
+
+/* Define to 1 when the gnulib module socket should be tested. */
+#undef GNULIB_TEST_SOCKET
+
+/* Define to 1 when the gnulib module stat should be tested. */
+#undef GNULIB_TEST_STAT
+
+/* Define to 1 when the gnulib module strchrnul should be tested. */
+#undef GNULIB_TEST_STRCHRNUL
+
+/* Define to 1 when the gnulib module strdup should be tested. */
+#undef GNULIB_TEST_STRDUP
+
+/* Define to 1 when the gnulib module strtok_r should be tested. */
+#undef GNULIB_TEST_STRTOK_R
+
+/* Define to 1 when the gnulib module time_r should be tested. */
+#undef GNULIB_TEST_TIME_R
+
+/* Define to 1 when the gnulib module ttyname_r should be tested. */
+#undef GNULIB_TEST_TTYNAME_R
+
+/* Define to 1 when the gnulib module waitpid should be tested. */
+#undef GNULIB_TEST_WAITPID
+
+/* Define to 1 when the gnulib module wcwidth should be tested. */
+#undef GNULIB_TEST_WCWIDTH
+
+/* Define to 1 if you have 'alloca' after including <alloca.h>, a header that
+   may be supplied by this distribution. */
+#undef HAVE_ALLOCA
+
+/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
+   */
+#undef HAVE_ALLOCA_H
+
+/* Define to 1 if you have the <arpa/inet.h> header file. */
+#undef HAVE_ARPA_INET_H
+
+/* Define to 1 if you have the <bp-sym.h> header file. */
+#undef HAVE_BP_SYM_H
+
+/* whether BSD style bridge management is available */
+#undef HAVE_BSD_BRIDGE_MGMT
+
+/* whether BSD CPU affinity management is available */
+#undef HAVE_BSD_CPU_AFFINITY
+
+/* whether using BSD style NSS */
+#undef HAVE_BSD_NSS
+
+/* Define to 1 if you have the `cfmakeraw' function. */
+#undef HAVE_CFMAKERAW
+
+/* Define to 1 if you have the `chown' function. */
+#undef HAVE_CHOWN
+
+/* Define to 1 if you have the <crtdefs.h> header file. */
+#undef HAVE_CRTDEFS_H
+
+/* Define to 1 if the system has the type `DBusBasicValue'. */
+#undef HAVE_DBUSBASICVALUE
+
+/* Define to 1 if you have the `dbus_watch_get_unix_fd' function. */
+#undef HAVE_DBUS_WATCH_GET_UNIX_FD
+
+/* Define to 1 if you have the declaration of `BPF_CGROUP_DEVICE', and to 0 if
+   you don't. */
+#undef HAVE_DECL_BPF_CGROUP_DEVICE
+
+/* Define to 1 if you have the declaration of `BPF_PROG_QUERY', and to 0 if
+   you don't. */
+#undef HAVE_DECL_BPF_PROG_QUERY
+
+/* Define to 1 if you have the declaration of `BRDGADD', and to 0 if you
+   don't. */
+#undef HAVE_DECL_BRDGADD
+
+/* Define to 1 if you have the declaration of `BRDGDEL', and to 0 if you
+   don't. */
+#undef HAVE_DECL_BRDGDEL
+
+/* Define to 1 if you have the declaration of `BRDGSFD', and to 0 if you
+   don't. */
+#undef HAVE_DECL_BRDGSFD
+
+/* Define to 1 if you have the declaration of `clock_get_time', and to 0 if
+   you don't. */
+#undef HAVE_DECL_CLOCK_GET_TIME
+
+/* Define to 1 if you have the declaration of `clock_serv_t', and to 0 if you
+   don't. */
+#undef HAVE_DECL_CLOCK_SERV_T
+
+/* Define to 1 if you have the declaration of `cpuset_getaffinity', and to 0
+   if you don't. */
+#undef HAVE_DECL_CPUSET_GETAFFINITY
+
+/* Define to 1 if you have the declaration of `DEVLINK_CMD_ESWITCH_GET', and
+   to 0 if you don't. */
+#undef HAVE_DECL_DEVLINK_CMD_ESWITCH_GET
+
+/* Define to 1 if you have the declaration of `ETHTOOL_GCOALESCE', and to 0 if
+   you don't. */
+#undef HAVE_DECL_ETHTOOL_GCOALESCE
+
+/* Define to 1 if you have the declaration of `ETHTOOL_GFEATURES', and to 0 if
+   you don't. */
+#undef HAVE_DECL_ETHTOOL_GFEATURES
+
+/* Define to 1 if you have the declaration of `ETHTOOL_GFLAGS', and to 0 if
+   you don't. */
+#undef HAVE_DECL_ETHTOOL_GFLAGS
+
+/* Define to 1 if you have the declaration of `ETHTOOL_GGRO', and to 0 if you
+   don't. */
+#undef HAVE_DECL_ETHTOOL_GGRO
+
+/* Define to 1 if you have the declaration of `ETHTOOL_GGSO', and to 0 if you
+   don't. */
+#undef HAVE_DECL_ETHTOOL_GGSO
+
+/* Define to 1 if you have the declaration of `ETHTOOL_SCOALESCE', and to 0 if
+   you don't. */
+#undef HAVE_DECL_ETHTOOL_SCOALESCE
+
+/* Define to 1 if you have the declaration of `ETH_FLAG_LRO', and to 0 if you
+   don't. */
+#undef HAVE_DECL_ETH_FLAG_LRO
+
+/* Define to 1 if you have the declaration of `ETH_FLAG_NTUPLE', and to 0 if
+   you don't. */
+#undef HAVE_DECL_ETH_FLAG_NTUPLE
+
+/* Define to 1 if you have the declaration of `ETH_FLAG_RXHASH', and to 0 if
+   you don't. */
+#undef HAVE_DECL_ETH_FLAG_RXHASH
+
+/* Define to 1 if you have the declaration of `ETH_FLAG_TXVLAN', and to 0 if
+   you don't. */
+#undef HAVE_DECL_ETH_FLAG_TXVLAN
+
+/* Define to 1 if you have the declaration of `fflush_unlocked', and to 0 if
+   you don't. */
+#undef HAVE_DECL_FFLUSH_UNLOCKED
+
+/* Define to 1 if you have the declaration of `flockfile', and to 0 if you
+   don't. */
+#undef HAVE_DECL_FLOCKFILE
+
+/* Define to 1 if you have the declaration of `fputs_unlocked', and to 0 if
+   you don't. */
+#undef HAVE_DECL_FPUTS_UNLOCKED
+
+/* Define to 1 if you have the declaration of `freeaddrinfo', and to 0 if you
+   don't. */
+#undef HAVE_DECL_FREEADDRINFO
+
+/* Define to 1 if you have the declaration of `fseeko', and to 0 if you don't.
+   */
+#undef HAVE_DECL_FSEEKO
+
+/* Define to 1 if you have the declaration of `funlockfile', and to 0 if you
+   don't. */
+#undef HAVE_DECL_FUNLOCKFILE
+
+/* Define to 1 if you have the declaration of `gai_strerror', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GAI_STRERROR
+
+/* Define to 1 if you have the declaration of `gai_strerrorA', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GAI_STRERRORA
+
+/* Define to 1 if you have the declaration of `getaddrinfo', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETADDRINFO
+
+/* Define to 1 if you have the declaration of `getc_unlocked', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETC_UNLOCKED
+
+/* Define to 1 if you have the declaration of `getdelim', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETDELIM
+
+/* Define to 1 if you have the declaration of `getdtablesize', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETDTABLESIZE
+
+/* Define to 1 if you have the declaration of `getline', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETLINE
+
+/* Define to 1 if you have the declaration of `getnameinfo', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETNAMEINFO
+
+/* Define to 1 if you have the declaration of `GET_VLAN_VID_CMD', and to 0 if
+   you don't. */
+#undef HAVE_DECL_GET_VLAN_VID_CMD
+
+/* Define to 1 if you have the declaration of `host_get_clock_service', and to
+   0 if you don't. */
+#undef HAVE_DECL_HOST_GET_CLOCK_SERVICE
+
+/* Define to 1 if you have the declaration of `htole64', and to 0 if you
+   don't. */
+#undef HAVE_DECL_HTOLE64
+
+/* Define to 1 if you have the declaration of `inet_ntop', and to 0 if you
+   don't. */
+#undef HAVE_DECL_INET_NTOP
+
+/* whether link_addr is available */
+#undef HAVE_DECL_LINK_ADDR
+
+/* Define to 1 if you have the declaration of `localtime_r', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LOCALTIME_R
+
+/* Define to 1 if you have the declaration of `LOOP_CTL_GET_FREE', and to 0 if
+   you don't. */
+#undef HAVE_DECL_LOOP_CTL_GET_FREE
+
+/* Define to 1 if you have the declaration of `LO_FLAGS_AUTOCLEAR', and to 0
+   if you don't. */
+#undef HAVE_DECL_LO_FLAGS_AUTOCLEAR
+
+/* Define to 1 if you have the declaration of `MACVLAN_MODE_PASSTHRU', and to
+   0 if you don't. */
+#undef HAVE_DECL_MACVLAN_MODE_PASSTHRU
+
+/* Define to 1 if you have the declaration of `openpty', and to 0 if you
+   don't. */
+#undef HAVE_DECL_OPENPTY
+
+/* Define to 1 if you have the declaration of `putc_unlocked', and to 0 if you
+   don't. */
+#undef HAVE_DECL_PUTC_UNLOCKED
+
+/* Define to 1 if you have the declaration of `rl_completion_quote_character',
+   and to 0 if you don't. */
+#undef HAVE_DECL_RL_COMPLETION_QUOTE_CHARACTER
+
+/* Define to 1 if you have the declaration of `SANLK_INQ_WAIT', and to 0 if
+   you don't. */
+#undef HAVE_DECL_SANLK_INQ_WAIT
+
+/* Define to 1 if you have the declaration of `SEEK_HOLE', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SEEK_HOLE
+
+/* Define to 1 if you have the declaration of `snprintf', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SNPRINTF
+
+/* Define to 1 if you have the declaration of `strdup', and to 0 if you don't.
+   */
+#undef HAVE_DECL_STRDUP
+
+/* Define to 1 if you have the declaration of `strtok_r', and to 0 if you
+   don't. */
+#undef HAVE_DECL_STRTOK_R
+
+/* Define to 1 if you have the declaration of `towlower', and to 0 if you
+   don't. */
+#undef HAVE_DECL_TOWLOWER
+
+/* Define to 1 if you have the declaration of `ttyname_r', and to 0 if you
+   don't. */
+#undef HAVE_DECL_TTYNAME_R
+
+/* Define to 1 if you have the declaration of `VHOST_VSOCK_SET_GUEST_CID', and
+   to 0 if you don't. */
+#undef HAVE_DECL_VHOST_VSOCK_SET_GUEST_CID
+
+/* Define to 1 if you have the declaration of `wcwidth', and to 0 if you
+   don't. */
+#undef HAVE_DECL_WCWIDTH
+
+/* Define to 1 if you have the declaration of `_fseeki64', and to 0 if you
+   don't. */
+#undef HAVE_DECL__FSEEKI64
+
+/* Define to 1 if you have the declaration of `_snprintf', and to 0 if you
+   don't. */
+#undef HAVE_DECL__SNPRINTF
+
+/* Define to 1 if you have the declaration of `__fsetlocking', and to 0 if you
+   don't. */
+#undef HAVE_DECL___FSETLOCKING
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the 'dup2' function. */
+#undef HAVE_DUP2
+
+/* Define if you have the declaration of environ. */
+#undef HAVE_ENVIRON_DECL
+
+/* Define to 1 if you have the `fallocate' function. */
+#undef HAVE_FALLOCATE
+
+/* Define to 1 if you have the `fchown' function. */
+#undef HAVE_FCHOWN
+
+/* Define to 1 if you have the `fcntl' function. */
+#undef HAVE_FCNTL
+
+/* Define to 1 if you have the <features.h> header file. */
+#undef HAVE_FEATURES_H
+
+/* Define to 1 if you have the `flockfile' function. */
+#undef HAVE_FLOCKFILE
+
+/* Define to 1 if fseeko (and presumably ftello) exists and is declared. */
+#undef HAVE_FSEEKO
+
+/* Define to 1 if you have the `funlockfile' function. */
+#undef HAVE_FUNLOCKFILE
+
+/* Define to 1 if getaddrinfo exists, or to 0 otherwise. */
+#undef HAVE_GETADDRINFO
+
+/* Define to 1 if you have the `getdelim' function. */
+#undef HAVE_GETDELIM
+
+/* Define to 1 if you have the `getdtablesize' function. */
+#undef HAVE_GETDTABLESIZE
+
+/* Define to 1 if you have the `getegid' function. */
+#undef HAVE_GETEGID
+
+/* Define to 1 if you have the `geteuid' function. */
+#undef HAVE_GETEUID
+
+/* Define to 1 if you have the `getgid' function. */
+#undef HAVE_GETGID
+
+/* Define to 1 if you have the `getgrouplist' function. */
+#undef HAVE_GETGROUPLIST
+
+/* Define to 1 if your system has a working `getgroups' function. */
+#undef HAVE_GETGROUPS
+
+/* Define to 1 if you have the `gethostbyname' function. */
+#undef HAVE_GETHOSTBYNAME
+
+/* Define to 1 if you have the `gethostname' function. */
+#undef HAVE_GETHOSTNAME
+
+/* Define to 1 if you have the `getifaddrs' function. */
+#undef HAVE_GETIFADDRS
+
+/* Define to 1 if you have the `getmntent_r' function. */
+#undef HAVE_GETMNTENT_R
+
+/* Define to 1 if you have the `getpass' function. */
+#undef HAVE_GETPASS
+
+/* Define to 1 if you have the `getpwuid_r' function. */
+#undef HAVE_GETPWUID_R
+
+/* Define to 1 if you have the `getrlimit' function. */
+#undef HAVE_GETRLIMIT
+
+/* Define to 1 if you have the `getservbyname' function. */
+#undef HAVE_GETSERVBYNAME
+
+/* Define to 1 if you have the `getsysinfo' function. */
+#undef HAVE_GETSYSINFO
+
+/* Define to 1 if you have the `getuid' function. */
+#undef HAVE_GETUID
+
+/* Define to 1 if you have the `getutxid' function. */
+#undef HAVE_GETUTXID
+
+/* Define to 1 if you have the <grp.h> header file. */
+#undef HAVE_GRP_H
+
+/* Define to 1 if you have the <ifaddrs.h> header file. */
+#undef HAVE_IFADDRS_H
+
+/* Define to 1 if you have the `if_indextoname' function. */
+#undef HAVE_IF_INDEXTONAME
+
+/* Define to 1 if you have the `inet_ntop' function. */
+#undef HAVE_INET_NTOP
+
+/* Define if you have the 'intmax_t' type in <stdint.h> or <inttypes.h>. */
+#undef HAVE_INTMAX_T
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define if <inttypes.h> exists, doesn't clash with <sys/types.h>, and
+   declares uintmax_t. */
+#undef HAVE_INTTYPES_H_WITH_UINTMAX
+
+/* Define to 1 if you have the `ioctl' function. */
+#undef HAVE_IOCTL
+
+/* Define to 1 if <sys/socket.h> defines AF_INET. */
+#undef HAVE_IPV4
+
+/* Define to 1 if <sys/socket.h> defines AF_INET6. */
+#undef HAVE_IPV6
+
+/* Define to 1 if you have the `iswcntrl' function. */
+#undef HAVE_ISWCNTRL
+
+/* Define if you have <langinfo.h> and nl_langinfo(CODESET). */
+#undef HAVE_LANGINFO_CODESET
+
+/* Define to 1 if you have the `apparmor' library (-lapparmor). */
+#undef HAVE_LIBAPPARMOR
+
+/* Define to 1 if you have the `attr' library (-lattr). */
+#undef HAVE_LIBATTR
+
+/* Define to 1 if you have the `audit' library (-laudit). */
+#undef HAVE_LIBAUDIT
+
+/* Define to 1 if you have the `cap-ng' library (-lcap-ng). */
+#undef HAVE_LIBCAP_NG
+
+/* Define to 1 if you have the `devmapper' library (-ldevmapper). */
+#undef HAVE_LIBDEVMAPPER
+
+/* Define to 1 if you have the `intl' library (-lintl). */
+#undef HAVE_LIBINTL
+
+/* Define to 1 if you have the <libintl.h> header file. */
+#undef HAVE_LIBINTL_H
+
+/* Define to 1 if you have the `kvm' library (-lkvm). */
+#undef HAVE_LIBKVM
+
+/* whether the netlink library is available */
+#undef HAVE_LIBNL
+
+/* Define to 1 if you have the `numa' library (-lnuma). */
+#undef HAVE_LIBNUMA
+
+/* whether libpcap can be used */
+#undef HAVE_LIBPCAP
+
+/* Define to 1 if you have the `portablexdr' library (-lportablexdr). */
+#undef HAVE_LIBPORTABLEXDR
+
+/* Define to 1 if you have the `readline' library (-lreadline). */
+#undef HAVE_LIBREADLINE
+
+/* Define to 1 if you have the `sanlock_client' library (-lsanlock_client). */
+#undef HAVE_LIBSANLOCK_CLIENT
+
+/* Define to 1 if you have the `selinux' library (-lselinux). */
+#undef HAVE_LIBSELINUX
+
+/* Define to 1 if you have the <libtasn1.h> header file. */
+#undef HAVE_LIBTASN1_H
+
+/* Define to 1 if you have the <libutil.h> header file. */
+#undef HAVE_LIBUTIL_H
+
+/* Define to 1 if you have the <libxlutil.h> header file. */
+#undef HAVE_LIBXLUTIL_H
+
+/* Define to 1 if you have the `yajl' library (-lyajl). */
+#undef HAVE_LIBYAJL
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the <linux/btrfs.h> header file. */
+#undef HAVE_LINUX_BTRFS_H
+
+/* Define to 1 if you have the <linux/devlink.h> header file. */
+#undef HAVE_LINUX_DEVLINK_H
+
+/* Define to 1 if you have the <linux/if_bridge.h> header file. */
+#undef HAVE_LINUX_IF_BRIDGE_H
+
+/* Define to 1 if you have the <linux/if_tun.h> header file. */
+#undef HAVE_LINUX_IF_TUN_H
+
+/* Define to 1 if you have the <linux/kvm.h> header file. */
+#undef HAVE_LINUX_KVM_H
+
+/* Define to 1 if you have the <linux/magic.h> header file. */
+#undef HAVE_LINUX_MAGIC_H
+
+/* Define to 1 if you have the <linux/param.h> header file. */
+#undef HAVE_LINUX_PARAM_H
+
+/* Define to 1 if you have the <linux/sockios.h> header file. */
+#undef HAVE_LINUX_SOCKIOS_H
+
+/* Define to 1 if you have the `localtime_r' function. */
+#undef HAVE_LOCALTIME_R
+
+/* Define to 1 if the system has the type 'long long int'. */
+#undef HAVE_LONG_LONG_INT
+
+/* Define to 1 if you have the `lstat' function. */
+#undef HAVE_LSTAT
+
+/* Define to 1 if you have the `lstat64' function. */
+#undef HAVE_LSTAT64
+
+/* Define to 1 if you have the <machine/hal_sysinfo.h> header file. */
+#undef HAVE_MACHINE_HAL_SYSINFO_H
+
+/* whether Mach clock routines are available */
+#undef HAVE_MACH_CLOCK_ROUTINES
+
+/* Define if the 'malloc' function is POSIX compliant. */
+#undef HAVE_MALLOC_POSIX
+
+/* Define to 1 if mmap()'s MAP_ANONYMOUS flag is available after including
+   config.h and <sys/mman.h>. */
+#undef HAVE_MAP_ANONYMOUS
+
+/* Define to 1 if you have the `mbrtowc' function. */
+#undef HAVE_MBRTOWC
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `mmap' function. */
+#undef HAVE_MMAP
+
+/* Define to 1 if you have the <mntent.h> header file. */
+#undef HAVE_MNTENT_H
+
+/* Define to 1 if you have the `mprotect' function. */
+#undef HAVE_MPROTECT
+
+/* Define to 1 on MSVC platforms that have the "invalid parameter handler"
+   concept. */
+#undef HAVE_MSVC_INVALID_PARAMETER_HANDLER
+
+/* Define to 1 if you have the <netdb.h> header file. */
+#undef HAVE_NETDB_H
+
+/* Define to 1 if you have the <netinet/in.h> header file. */
+#undef HAVE_NETINET_IN_H
+
+/* Define to 1 if you have the <netinet/tcp.h> header file. */
+#undef HAVE_NETINET_TCP_H
+
+/* Define to 1 if you have the <net/ethernet.h> header file. */
+#undef HAVE_NET_ETHERNET_H
+
+/* Define to 1 if you have the <net/if.h> header file. */
+#undef HAVE_NET_IF_H
+
+/* Define to 1 if you have the `newlocale' function. */
+#undef HAVE_NEWLOCALE
+
+/* Define to 1 if you have the <nss.h> header file. */
+#undef HAVE_NSS_H
+
+/* Define to 1 if the system has the type `nss_module_unregister_fn'. */
+#undef HAVE_NSS_MODULE_UNREGISTER_FN
+
+/* Define to 1 if the system has the type `ns_mtab'. */
+#undef HAVE_NS_MTAB
+
+/* whether numad is available */
+#undef HAVE_NUMAD
+
+/* whether numa_bitmask_isbitset is available */
+#undef HAVE_NUMA_BITMASK_ISBITSET
+
+/* Define to 1 if the system has the 'openpty' function. */
+#undef HAVE_OPENPTY
+
+/* Define to 1 if you have the `pipe' function. */
+#undef HAVE_PIPE
+
+/* Define to 1 if you have the `pipe2' function. */
+#undef HAVE_PIPE2
+
+/* Define to 1 if you have the 'poll' function and it works. */
+#undef HAVE_POLL
+
+/* Define to 1 if you have the <poll.h> header file. */
+#undef HAVE_POLL_H
+
+/* Define if the ttyname_r function has a POSIX compliant declaration. */
+#undef HAVE_POSIXDECL_TTYNAME_R
+
+/* Define to 1 if you have the `posix_fallocate' function. */
+#undef HAVE_POSIX_FALLOCATE
+
+/* Define to 1 if you have the `posix_memalign' function. */
+#undef HAVE_POSIX_MEMALIGN
+
+/* Define to 1 if you have the `posix_openpt' function. */
+#undef HAVE_POSIX_OPENPT
+
+/* Define to 1 if you have the `prlimit' function. */
+#undef HAVE_PRLIMIT
+
+/* Define to 1 if you have the `pstat_getdynamic' function. */
+#undef HAVE_PSTAT_GETDYNAMIC
+
+/* Define to 1 if you have the `pstat_getstatic' function. */
+#undef HAVE_PSTAT_GETSTATIC
+
+/* Define if you have the <pthread.h> header and the POSIX threads API. */
+#undef HAVE_PTHREAD_API
+
+/* Define to 1 if you have the <pthread.h> header file. */
+#undef HAVE_PTHREAD_H
+
+/* Define to 1 if you have the `pthread_mutexattr_init' function. */
+#undef HAVE_PTHREAD_MUTEXATTR_INIT
+
+/* Define to 1 if the pthread_sigmask function can be used (despite bugs). */
+#undef HAVE_PTHREAD_SIGMASK
+
+/* Define to 1 if the system has the type `pthread_spinlock_t'. */
+#undef HAVE_PTHREAD_SPINLOCK_T
+
+/* Define to 1 if the system has the type `pthread_t'. */
+#undef HAVE_PTHREAD_T
+
+/* Define to 1 if you have the <pty.h> header file. */
+#undef HAVE_PTY_H
+
+/* Define to 1 if you have the <pwd.h> header file. */
+#undef HAVE_PWD_H
+
+/* Define to 1 if you have the `raise' function. */
+#undef HAVE_RAISE
+
+/* Define to 1 if you have the `rawmemchr' function. */
+#undef HAVE_RAWMEMCHR
+
+/* Define to 1 if you have the `rbd_get_features' function. */
+#undef HAVE_RBD_GET_FEATURES
+
+/* Define to 1 if you have the `rbd_list2' function. */
+#undef HAVE_RBD_LIST2
+
+/* Define if the 'realloc' function is POSIX compliant. */
+#undef HAVE_REALLOC_POSIX
+
+/* Define to 1 if you have the `recvmsg' function. */
+#undef HAVE_RECVMSG
+
+/* whether sanlock supports sanlock_inq_lockspace */
+#undef HAVE_SANLOCK_INQ_LOCKSPACE
+
+/* whether sanlock supports sanlock_write_lockspace */
+#undef HAVE_SANLOCK_IO_TIMEOUT
+
+/* whether Sanlock supports sanlock_killpath */
+#undef HAVE_SANLOCK_KILLPATH
+
+/* whether sanlock supports sanlock_strerror */
+#undef HAVE_SANLOCK_STRERROR
+
+/* Define to 1 if the system has the type `sa_family_t'. */
+#undef HAVE_SA_FAMILY_T
+
+/* Define to 1 if you have the `sched_getaffinity' function. */
+#undef HAVE_SCHED_GETAFFINITY
+
+/* Define to 1 if you have the <sched.h> header file. */
+#undef HAVE_SCHED_H
+
+/* Define to 1 if you have the `sched_setscheduler' function. */
+#undef HAVE_SCHED_SETSCHEDULER
+
+/* Define to 1 if you have the `selinux_lxc_contexts_path' function. */
+#undef HAVE_SELINUX_LXC_CONTEXTS_PATH
+
+/* Define to 1 if you have the `sendmsg' function. */
+#undef HAVE_SENDMSG
+
+/* Define to 1 if you have the `setdtablesize' function. */
+#undef HAVE_SETDTABLESIZE
+
+/* Define to 1 if you have the `setgroups' function. */
+#undef HAVE_SETGROUPS
+
+/* Define to 1 if you have the `setns' function. */
+#undef HAVE_SETNS
+
+/* Define to 1 if you have the `setrlimit' function. */
+#undef HAVE_SETRLIMIT
+
+/* Define to 1 if you have the `shutdown' function. */
+#undef HAVE_SHUTDOWN
+
+/* Define to 1 if you have the `sigaction' function. */
+#undef HAVE_SIGACTION
+
+/* Define to 1 if you have the `sigaltstack' function. */
+#undef HAVE_SIGALTSTACK
+
+/* Define to 1 if the system has the type `siginfo_t'. */
+#undef HAVE_SIGINFO_T
+
+/* Define to 1 if you have the `siginterrupt' function. */
+#undef HAVE_SIGINTERRUPT
+
+/* Define to 1 if 'sig_atomic_t' is a signed integer type. */
+#undef HAVE_SIGNED_SIG_ATOMIC_T
+
+/* Define to 1 if 'wchar_t' is a signed integer type. */
+#undef HAVE_SIGNED_WCHAR_T
+
+/* Define to 1 if 'wint_t' is a signed integer type. */
+#undef HAVE_SIGNED_WINT_T
+
+/* Define to 1 if the system has the type `sigset_t'. */
+#undef HAVE_SIGSET_T
+
+/* Define to 1 if you have the `snprintf' function. */
+#undef HAVE_SNPRINTF
+
+/* Define if the return value of the snprintf function is the number of of
+   bytes (excluding the terminating NUL) that would have been produced if the
+   buffer had been large enough. */
+#undef HAVE_SNPRINTF_RETVAL_C99
+
+/* Define to 1 if you have the `stat' function. */
+#undef HAVE_STAT
+
+/* Define to 1 if you have the `stat64' function. */
+#undef HAVE_STAT64
+
+/* Define to 1 if you have the <stdarg.h> header file. */
+#undef HAVE_STDARG_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define if <stdint.h> exists, doesn't clash with <sys/types.h>, and declares
+   uintmax_t. */
+#undef HAVE_STDINT_H_WITH_UINTMAX
+
+/* Define to 1 if you have the <stdio_ext.h> header file. */
+#undef HAVE_STDIO_EXT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strchrnul' function. */
+#undef HAVE_STRCHRNUL
+
+/* Define to 1 if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strnlen' function. */
+#undef HAVE_STRNLEN
+
+/* Define to 1 if you have the `strtok_r' function. */
+#undef HAVE_STRTOK_R
+
+/* Define to 1 if the system has the type `struct addrinfo'. */
+#undef HAVE_STRUCT_ADDRINFO
+
+/* Defined if struct gaih_addrtuple exists in nss.h */
+#undef HAVE_STRUCT_GAIH_ADDRTUPLE
+
+/* Defined if struct ifreq exists in net/if.h */
+#undef HAVE_STRUCT_IFREQ
+
+/* Define to 1 if `ifr_hwaddr' is a member of `struct ifreq'. */
+#undef HAVE_STRUCT_IFREQ_IFR_HWADDR
+
+/* Define to 1 if `ifr_ifindex' is a member of `struct ifreq'. */
+#undef HAVE_STRUCT_IFREQ_IFR_IFINDEX
+
+/* Define to 1 if `ifr_index' is a member of `struct ifreq'. */
+#undef HAVE_STRUCT_IFREQ_IFR_INDEX
+
+/* Define to 1 if `ifr_newname' is a member of `struct ifreq'. */
+#undef HAVE_STRUCT_IFREQ_IFR_NEWNAME
+
+/* Define to 1 if `ifi_oqdrops' is a member of `struct if_data'. */
+#undef HAVE_STRUCT_IF_DATA_IFI_OQDROPS
+
+/* Define to 1 if `decimal_point' is a member of `struct lconv'. */
+#undef HAVE_STRUCT_LCONV_DECIMAL_POINT
+
+/* Define to 1 if `msg_accrights' is a member of `struct msghdr'. */
+#undef HAVE_STRUCT_MSGHDR_MSG_ACCRIGHTS
+
+/* Define to 1 if `sa_sigaction' is a member of `struct sigaction'. */
+#undef HAVE_STRUCT_SIGACTION_SA_SIGACTION
+
+/* Define to 1 if `sa_len' is a member of `struct sockaddr'. */
+#undef HAVE_STRUCT_SOCKADDR_SA_LEN
+
+/* Define to 1 if the system has the type `struct sockaddr_storage'. */
+#undef HAVE_STRUCT_SOCKADDR_STORAGE
+
+/* Define to 1 if `ss_family' is a member of `struct sockaddr_storage'. */
+#undef HAVE_STRUCT_SOCKADDR_STORAGE_SS_FAMILY
+
+/* Defined if struct sockpeercred is available */
+#undef HAVE_STRUCT_SOCKPEERCRED
+
+/* Define to 1 if `st_atimensec' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_ATIMENSEC
+
+/* Define to 1 if `st_atimespec.tv_nsec' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC
+
+/* Define to 1 if `st_atim.st__tim.tv_nsec' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC
+
+/* Define to 1 if `st_atim.tv_nsec' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC
+
+/* Define to 1 if `st_birthtimensec' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_BIRTHTIMENSEC
+
+/* Define to 1 if `st_birthtimespec.tv_nsec' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_BIRTHTIMESPEC_TV_NSEC
+
+/* Define to 1 if `st_birthtim.tv_nsec' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_BIRTHTIM_TV_NSEC
+
+/* Define to 1 if `mem_unit' is a member of `struct sysinfo'. */
+#undef HAVE_STRUCT_SYSINFO_MEM_UNIT
+
+/* Define to 1 if the system has the type `struct utsname'. */
+#undef HAVE_STRUCT_UTSNAME
+
+/* Whether -Wsuggest-attribute=format works */
+#undef HAVE_SUGGEST_ATTRIBUTE_FORMAT
+
+/* Define to 1 if you have the `symlink' function. */
+#undef HAVE_SYMLINK
+
+/* Define to 1 if you have the `sysctl' function. */
+#undef HAVE_SYSCTL
+
+/* Define to 1 if you have the `sysctlbyname' function. */
+#undef HAVE_SYSCTLBYNAME
+
+/* Define to 1 if you have the `sysinfo' function. */
+#undef HAVE_SYSINFO
+
+/* Define to 1 if you have the <syslog.h> header file. */
+#undef HAVE_SYSLOG_H
+
+/* Define to 1 if you have the `sysmp' function. */
+#undef HAVE_SYSMP
+
+/* Define to 1 if you have the <sys/acl.h> header file. */
+#undef HAVE_SYS_ACL_H
+
+/* Define to 1 if you have the <sys/bitypes.h> header file. */
+#undef HAVE_SYS_BITYPES_H
+
+/* Define to 1 if you have the <sys/cdefs.h> header file. */
+#undef HAVE_SYS_CDEFS_H
+
+/* Define to 1 if you have the <sys/filio.h> header file. */
+#undef HAVE_SYS_FILIO_H
+
+/* Define to 1 if you have the <sys/inttypes.h> header file. */
+#undef HAVE_SYS_INTTYPES_H
+
+/* Define to 1 if you have the <sys/ioctl.h> header file. */
+#undef HAVE_SYS_IOCTL_H
+
+/* Define to 1 if you have the <sys/mman.h> header file. */
+#undef HAVE_SYS_MMAN_H
+
+/* Define to 1 if you have the <sys/mount.h> header file. */
+#undef HAVE_SYS_MOUNT_H
+
+/* Define to 1 if you have the <sys/param.h> header file. */
+#undef HAVE_SYS_PARAM_H
+
+/* Define to 1 if you have the <sys/pstat.h> header file. */
+#undef HAVE_SYS_PSTAT_H
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+#undef HAVE_SYS_SELECT_H
+
+/* Define to 1 if you have the <sys/socket.h> header file. */
+#undef HAVE_SYS_SOCKET_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/syscall.h> header file. */
+#undef HAVE_SYS_SYSCALL_H
+
+/* Define to 1 if you have the <sys/sysctl.h> header file. */
+#undef HAVE_SYS_SYSCTL_H
+
+/* Define to 1 if you have the <sys/sysinfo.h> header file. */
+#undef HAVE_SYS_SYSINFO_H
+
+/* Define to 1 if you have the <sys/sysmp.h> header file. */
+#undef HAVE_SYS_SYSMP_H
+
+/* Define to 1 if you have the <sys/systemcfg.h> header file. */
+#undef HAVE_SYS_SYSTEMCFG_H
+
+/* Define to 1 if you have the <sys/table.h> header file. */
+#undef HAVE_SYS_TABLE_H
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <sys/ucred.h> header file. */
+#undef HAVE_SYS_UCRED_H
+
+/* Define to 1 if you have the <sys/uio.h> header file. */
+#undef HAVE_SYS_UIO_H
+
+/* Define to 1 if you have the <sys/un.h> header file. */
+#undef HAVE_SYS_UN_H
+
+/* Define to 1 if you have the <sys/utsname.h> header file. */
+#undef HAVE_SYS_UTSNAME_H
+
+/* Define to 1 if you have the <sys/wait.h> header file. */
+#undef HAVE_SYS_WAIT_H
+
+/* Define to 1 if you have the `table' function. */
+#undef HAVE_TABLE
+
+/* Define to 1 if the system has the 'tcgetattr' function. */
+#undef HAVE_TCGETATTR
+
+/* Define to 1 if the system has the 'tcsetattr' function. */
+#undef HAVE_TCSETATTR
+
+/* Define to 1 if you have the <termios.h> header file. */
+#undef HAVE_TERMIOS_H
+
+/* Define to 1 if you have the `thrd_create' function. */
+#undef HAVE_THRD_CREATE
+
+/* Define to 1 if you have the <threads.h> header file. */
+#undef HAVE_THREADS_H
+
+/* Define to 1 if you have the `towlower' function. */
+#undef HAVE_TOWLOWER
+
+/* Define to 1 if you have the `ttyname' function. */
+#undef HAVE_TTYNAME
+
+/* Define to 1 if you have the `ttyname_r' function. */
+#undef HAVE_TTYNAME_R
+
+/* Define to 1 if you have the `uname' function. */
+#undef HAVE_UNAME
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `unshare' function. */
+#undef HAVE_UNSHARE
+
+/* Define to 1 if the system has the type 'unsigned long long int'. */
+#undef HAVE_UNSIGNED_LONG_LONG_INT
+
+/* Define to 1 if you have the <util.h> header file. */
+#undef HAVE_UTIL_H
+
+/* Define to 1 if you have the `vasnprintf' function. */
+#undef HAVE_VASNPRINTF
+
+/* Define to 1 if you have the <wchar.h> header file. */
+#undef HAVE_WCHAR_H
+
+/* Define if you have the 'wchar_t' type. */
+#undef HAVE_WCHAR_T
+
+/* Define to 1 if you have the `wcrtomb' function. */
+#undef HAVE_WCRTOMB
+
+/* Define to 1 if you have the `wcslen' function. */
+#undef HAVE_WCSLEN
+
+/* Define to 1 if you have the `wcsnlen' function. */
+#undef HAVE_WCSNLEN
+
+/* Define to 1 if you have the <wctype.h> header file. */
+#undef HAVE_WCTYPE_H
+
+/* Define to 1 if you have the `wcwidth' function. */
+#undef HAVE_WCWIDTH
+
+/* Define to 1 if the compiler and linker support weak declarations of
+   symbols. */
+#undef HAVE_WEAK_SYMBOLS
+
+/* Define to 1 if you have the <winsock2.h> header file. */
+#undef HAVE_WINSOCK2_H
+
+/* Define if you have the 'wint_t' type. */
+#undef HAVE_WINT_T
+
+/* Define to 1 if O_NOATIME works. */
+#undef HAVE_WORKING_O_NOATIME
+
+/* Define to 1 if O_NOFOLLOW works. */
+#undef HAVE_WORKING_O_NOFOLLOW
+
+/* Define to 1 if you have the <ws2tcpip.h> header file. */
+#undef HAVE_WS2TCPIP_H
+
+/* Define to 1 if you have the `xdr_u_int64_t' function. */
+#undef HAVE_XDR_U_INT64_T
+
+/* Define to 1 if Xen has PVH support. */
+#undef HAVE_XEN_PVH
+
+/* Define to 1 if you have the <xfs/xfs.h> header file. */
+#undef HAVE_XFS_XFS_H
+
+/* Define to 1 if you have the <xlocale.h> header file. */
+#undef HAVE_XLOCALE_H
+
+/* Define to 1 if the system has the type `_Bool'. */
+#undef HAVE__BOOL
+
+/* Define to 1 if you have the `_fseeki64' function. */
+#undef HAVE__FSEEKI64
+
+/* Define to 1 if you have the `_getpty' function. */
+#undef HAVE__GETPTY
+
+/* Define to 1 if you have the `_set_invalid_parameter_handler' function. */
+#undef HAVE__SET_INVALID_PARAMETER_HANDLER
+
+/* Define to 1 if you have the external variable, _system_configuration with a
+   member named physmem. */
+#undef HAVE__SYSTEM_CONFIGURATION
+
+/* Define to 1 if you have the `__fsetlocking' function. */
+#undef HAVE___FSETLOCKING
+
+/* Define to 1 if you have the `__lxstat' function. */
+#undef HAVE___LXSTAT
+
+/* Define to 1 if you have the `__lxstat64' function. */
+#undef HAVE___LXSTAT64
+
+/* Define to 1 if you have the `__xstat' function. */
+#undef HAVE___XSTAT
+
+/* Define to 1 if you have the `__xstat64' function. */
+#undef HAVE___XSTAT64
+
+/* Define HOST_NAME_MAX when <limits.h> does not define it. */
+#undef HOST_NAME_MAX
+
+/* path to ifconfig binary */
+#undef IFCONFIG_PATH
+
+/* path to ip6tables binary */
+#undef IP6TABLES_PATH
+
+/* path to iptables binary */
+#undef IPTABLES_PATH
+
+/* path to ip binary */
+#undef IP_PATH
+
+/* Location of iscsiadm program */
+#undef ISCSIADM
+
+/* directory containing Xen libexec binaries */
+#undef LIBXL_EXECBIN_DIR
+
+/* directory containing Xen firmware blobs */
+#undef LIBXL_FIRMWARE_DIR
+
+/* Define to 1 if lseek does not detect pipes. */
+#undef LSEEK_PIPE_BROKEN
+
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
+#undef LT_OBJDIR
+
+/* Location of lvchange program */
+#undef LVCHANGE
+
+/* Location of lvcreate program */
+#undef LVCREATE
+
+/* Location of lvremove program */
+#undef LVREMOVE
+
+/* Location of lvs program */
+#undef LVS
+
+/* Define to 1 if `major', `minor', and `makedev' are declared in <mkdev.h>.
+   */
+#undef MAJOR_IN_MKDEV
+
+/* Define to 1 if `major', `minor', and `makedev' are declared in
+   <sysmacros.h>. */
+#undef MAJOR_IN_SYSMACROS
+
+/* If malloc(0) is != NULL, define this to 1. Otherwise define this to 0. */
+#undef MALLOC_0_IS_NONNULL
+
+/* Define to a substitute value for mmap()'s MAP_ANONYMOUS flag. */
+#undef MAP_ANONYMOUS
+
+/* Use GNU style printf and scanf.  */
+#ifndef __USE_MINGW_ANSI_STDIO
+# undef __USE_MINGW_ANSI_STDIO
+#endif
+
+
+/* Location or name of the mkfs program */
+#undef MKFS
+
+/* Location or name of the mm-ctl program */
+#undef MMCTL
+
+/* Location or name of the modprobe program */
+#undef MODPROBE
+
+/* Location or name of the mount program */
+#undef MOUNT
+
+/* define to 1 if Linux kernel headers require a workaround to avoid
+   compilation errors when mixed with glibc netinet headers */
+#undef NETINET_LINUX_WORKAROUND
+
+/* whether nss plugin is enabled */
+#undef NSS
+
+/* Location or name of the numad program */
+#undef NUMAD
+
+/* Define to 1 if open() fails to recognize a trailing slash. */
+#undef OPEN_TRAILING_SLASH_BUG
+
+/* Location or name of the ovs-vsctl program */
+#undef OVSVSCTL
+
+/* Name of package */
+#undef PACKAGE
+
+/* Extra package name */
+#undef PACKAGER
+
+/* Extra package version */
+#undef PACKAGER_VERSION
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Location or name of the parted program */
+#undef PARTED
+
+/* Define to the type that is the result of default argument promotions of
+   type mode_t. */
+#undef PROMOTED_MODE_T
+
+/* Define if the pthread_in_use() detection is hard. */
+#undef PTHREAD_IN_USE_DETECTION_HARD
+
+/* Define to 1 if pthread_sigmask(), when it fails, returns -1 and sets errno.
+   */
+#undef PTHREAD_SIGMASK_FAILS_WITH_ERRNO
+
+/* Define to 1 if pthread_sigmask may return 0 and have no effect. */
+#undef PTHREAD_SIGMASK_INEFFECTIVE
+
+/* Define to 1 if pthread_sigmask() unblocks signals incorrectly. */
+#undef PTHREAD_SIGMASK_UNBLOCK_BUG
+
+/* Define to l, ll, u, ul, ull, etc., as suitable for constants of type
+   'ptrdiff_t'. */
+#undef PTRDIFF_T_SUFFIX
+
+/* Location of pvcreate program */
+#undef PVCREATE
+
+/* Location of pvremove program */
+#undef PVREMOVE
+
+/* Location of pvs program */
+#undef PVS
+
+/* path to python binary */
+#undef PYTHON
+
+/* QEMU bridge helper */
+#undef QEMU_BRIDGE_HELPER
+
+/* QEMU group account */
+#undef QEMU_GROUP
+
+/* QEMU PR helper */
+#undef QEMU_PR_HELPER
+
+/* QEMU slirp helper */
+#undef QEMU_SLIRP_HELPER
+
+/* QEMU user account */
+#undef QEMU_USER
+
+/* Location or name of the radvd program */
+#undef RADVD
+
+/* Default remote driver mode */
+#undef REMOTE_DRIVER_MODE_DEFAULT
+
+/* Define to 1 if stat needs help when passed a file name with a trailing
+   slash */
+#undef REPLACE_FUNC_STAT_FILE
+
+/* Define if vasnprintf exists but is overridden by gnulib. */
+#undef REPLACE_VASNPRINTF
+
+/* Location or name of the rmmod program */
+#undef RMMOD
+
+/* Location or name of the scrub program (for wiping algorithms) */
+#undef SCRUB
+
+/* SELinux mount point */
+#undef SELINUX_MOUNT
+
+/* Location of sheepdog client program */
+#undef SHEEPDOGCLI
+
+/* Location or name of the showmount program */
+#undef SHOWMOUNT
+
+/* Define to l, ll, u, ul, ull, etc., as suitable for constants of type
+   'sig_atomic_t'. */
+#undef SIG_ATOMIC_T_SUFFIX
+
+/* The size of `long', as computed by sizeof. */
+#undef SIZEOF_LONG
+
+/* Define as the maximum value of type 'size_t', if the system doesn't define
+   it. */
+#ifndef SIZE_MAX
+# undef SIZE_MAX
+#endif
+
+/* Define to l, ll, u, ul, ull, etc., as suitable for constants of type
+   'size_t'. */
+#undef SIZE_T_SUFFIX
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at runtime.
+	STACK_DIRECTION > 0 => grows toward higher addresses
+	STACK_DIRECTION < 0 => grows toward lower addresses
+	STACK_DIRECTION = 0 => direction of growth unknown */
+#undef STACK_DIRECTION
+
+/* Define to 1 when performing static analysis. */
+#undef STATIC_ANALYSIS
+
+/* Define to 1 if the `S_IS*' macros in <sys/stat.h> do not work properly. */
+#undef STAT_MACROS_BROKEN
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Location or name of the tc program (see iproute2) */
+#undef TC
+
+/* TLS default priority string */
+#undef TLS_PRIORITY
+
+/* Define to 1 if the type of the st_atim member of a struct stat is struct
+   timespec. */
+#undef TYPEOF_STRUCT_STAT_ST_ATIM_IS_STRUCT_TIMESPEC
+
+/* Location or name of the udevadm program */
+#undef UDEVADM
+
+/* Location or name of the umount programm */
+#undef UMOUNT
+
+/* Define to the prefix of C symbols at the assembler and linker level, either
+   an underscore or empty. */
+#undef USER_LABEL_PREFIX
+
+/* Define if the combination of the ISO C and POSIX multithreading APIs can be
+   used. */
+#undef USE_ISOC_AND_POSIX_THREADS
+
+/* Define if the ISO C multithreading library can be used. */
+#undef USE_ISOC_THREADS
+
+/* Define if the POSIX multithreading library can be used. */
+#undef USE_POSIX_THREADS
+
+/* Define if references to the POSIX multithreading library should be made
+   weak. */
+#undef USE_POSIX_THREADS_WEAK
+
+/* Enable extensions on AIX 3, Interix.  */
+#ifndef _ALL_SOURCE
+# undef _ALL_SOURCE
+#endif
+/* Enable general extensions on macOS.  */
+#ifndef _DARWIN_C_SOURCE
+# undef _DARWIN_C_SOURCE
+#endif
+/* Enable GNU extensions on systems that have them.  */
+#ifndef _GNU_SOURCE
+# undef _GNU_SOURCE
+#endif
+/* Enable NetBSD extensions on NetBSD.  */
+#ifndef _NETBSD_SOURCE
+# undef _NETBSD_SOURCE
+#endif
+/* Enable OpenBSD extensions on NetBSD.  */
+#ifndef _OPENBSD_SOURCE
+# undef _OPENBSD_SOURCE
+#endif
+/* Enable threading extensions on Solaris.  */
+#ifndef _POSIX_PTHREAD_SEMANTICS
+# undef _POSIX_PTHREAD_SEMANTICS
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-5:2014.  */
+#ifndef __STDC_WANT_IEC_60559_ATTRIBS_EXT__
+# undef __STDC_WANT_IEC_60559_ATTRIBS_EXT__
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-1:2014.  */
+#ifndef __STDC_WANT_IEC_60559_BFP_EXT__
+# undef __STDC_WANT_IEC_60559_BFP_EXT__
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-2:2015.  */
+#ifndef __STDC_WANT_IEC_60559_DFP_EXT__
+# undef __STDC_WANT_IEC_60559_DFP_EXT__
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-4:2015.  */
+#ifndef __STDC_WANT_IEC_60559_FUNCS_EXT__
+# undef __STDC_WANT_IEC_60559_FUNCS_EXT__
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-3:2015.  */
+#ifndef __STDC_WANT_IEC_60559_TYPES_EXT__
+# undef __STDC_WANT_IEC_60559_TYPES_EXT__
+#endif
+/* Enable extensions specified by ISO/IEC TR 24731-2:2010.  */
+#ifndef __STDC_WANT_LIB_EXT2__
+# undef __STDC_WANT_LIB_EXT2__
+#endif
+/* Enable extensions specified by ISO/IEC 24747:2009.  */
+#ifndef __STDC_WANT_MATH_SPEC_FUNCS__
+# undef __STDC_WANT_MATH_SPEC_FUNCS__
+#endif
+/* Enable extensions on HP NonStop.  */
+#ifndef _TANDEM_SOURCE
+# undef _TANDEM_SOURCE
+#endif
+/* Enable X/Open extensions if necessary.  HP-UX 11.11 defines
+   mbstate_t only if _XOPEN_SOURCE is defined to 500, regardless of
+   whether compiling with -Ae or -D_HPUX_SOURCE=1.  */
+#ifndef _XOPEN_SOURCE
+# undef _XOPEN_SOURCE
+#endif
+/* Enable X/Open compliant socket functions that do not require linking
+   with -lxnet on HP-UX 11.11.  */
+#ifndef _HPUX_ALT_XOPEN_SOCKET_API
+# undef _HPUX_ALT_XOPEN_SOCKET_API
+#endif
+/* Enable general extensions on Solaris.  */
+#ifndef __EXTENSIONS__
+# undef __EXTENSIONS__
+#endif
+
+
+/* Define if the native Windows multithreading API can be used. */
+#undef USE_WINDOWS_THREADS
+
+/* Location of directory containing VirtualBox XPCOMC library */
+#undef VBOX_XPCOMC_DIR
+
+/* Version number of package */
+#undef VERSION
+
+/* Location of vgchange program */
+#undef VGCHANGE
+
+/* Location of vgcreate program */
+#undef VGCREATE
+
+/* Location of vgremove program */
+#undef VGREMOVE
+
+/* Location of vgs program */
+#undef VGS
+
+/* Location of vgscan program */
+#undef VGSCAN
+
+/* Use GCC atomic ops */
+#undef VIR_ATOMIC_OPS_GCC
+
+/* Use pthread atomic ops emulation */
+#undef VIR_ATOMIC_OPS_PTHREAD
+
+/* Use Win32 atomic ops */
+#undef VIR_ATOMIC_OPS_WIN32
+
+/* path to directory containing UUCP device lock files */
+#undef VIR_CHRDEV_LOCK_FILE_PATH
+
+/* Define to empty or 'const' depending on how SELinux qualifies its
+   selabel_open parameter */
+#undef VIR_SELINUX_OPEN_CONST
+
+/* Location or name of the vstorage client tool */
+#undef VSTORAGE
+
+/* Location or name of the vstorage mount tool */
+#undef VSTORAGE_MOUNT
+
+/* Define to l, ll, u, ul, ull, etc., as suitable for constants of type
+   'wchar_t'. */
+#undef WCHAR_T_SUFFIX
+
+/* Define if WSAStartup is needed. */
+#undef WINDOWS_SOCKETS
+
+/* Define to l, ll, u, ul, ull, etc., as suitable for constants of type
+   'wint_t'. */
+#undef WINT_T_SUFFIX
+
+/* whether libapparmor is available */
+#undef WITH_APPARMOR
+
+/* whether libattr is available */
+#undef WITH_ATTR
+
+/* whether libaudit is available */
+#undef WITH_AUDIT
+
+/* whether bash-completion >= 2.0 is available */
+#undef WITH_BASH_COMPLETION
+
+/* whether bhyve driver is enabled */
+#undef WITH_BHYVE
+
+/* whether blkid >= 2.17 is available */
+#undef WITH_BLKID
+
+/* whether bridge code is needed */
+#undef WITH_BRIDGE
+
+/* whether libcap-ng is available */
+#undef WITH_CAPNG
+
+/* whether libcurl >= 7.18.0 is available */
+#undef WITH_CURL
+
+/* whether dbus-1 >= 1.0.0 is available */
+#undef WITH_DBUS
+
+/* whether libdevmapper is available */
+#undef WITH_DEVMAPPER
+
+/* whether DTrace static probes are available */
+#undef WITH_DTRACE_PROBES
+
+/* whether ESX driver is enabled */
+#undef WITH_ESX
+
+/* whether firewalld support is enabled */
+#undef WITH_FIREWALLD
+
+/* whether firewalld libvirt zone is installed */
+#undef WITH_FIREWALLD_ZONE
+
+/* whether fuse >= 2.8.6 is available */
+#undef WITH_FUSE
+
+/* whether glib-2.0 gobject-2.0 gio-2.0 >= $GLIB_REQUIRED is available */
+#undef WITH_GLIB
+
+/* whether glusterfs-api >= 3.4.1 is available */
+#undef WITH_GLUSTERFS
+
+/* whether gnutls >= 3.2.0 is available */
+#undef WITH_GNUTLS
+
+/* whether hal >= 0.5.0 is available */
+#undef WITH_HAL
+
+/* whether virt-host-validate is built */
+#undef WITH_HOST_VALIDATE
+
+/* whether Hyper-V driver is enabled */
+#undef WITH_HYPERV
+
+/* whether the interface driver is enabled */
+#undef WITH_INTERFACE
+
+/* whether libiscsi >= 1.18.0 is available */
+#undef WITH_LIBISCSI
+
+/* whether libparted >= $PARTED_REQUIRED is available */
+#undef WITH_LIBPARTED
+
+/* whether libssh >= 0.7 is available */
+#undef WITH_LIBSSH
+
+/* whether libvirtd daemon is enabled */
+#undef WITH_LIBVIRTD
+
+/* whether xenlight >= 4.6.0 is available */
+#undef WITH_LIBXL
+
+/* whether libxml-2.0 >= $LIBXML_REQUIRED is available */
+#undef WITH_LIBXML
+
+/* whether virt-login-shell is built */
+#undef WITH_LOGIN_SHELL
+
+/* whether LXC driver is enabled */
+#undef WITH_LXC
+
+/* whether macvtap support is enabled */
+#undef WITH_MACVTAP
+
+/* whether netcf >= 0.1.8 is available */
+#undef WITH_NETCF
+
+/* whether network driver is enabled */
+#undef WITH_NETWORK
+
+/* with node device driver */
+#undef WITH_NODE_DEVICES
+
+/* whether libnuma is available */
+#undef WITH_NUMACTL
+
+/* whether local network filter management driver is available */
+#undef WITH_NWFILTER
+
+/* whether OpenVZ driver is enabled */
+#undef WITH_OPENVZ
+
+/* whether openwsman >= 2.2.3 is available */
+#undef WITH_OPENWSMAN
+
+/* whether pciaccess >= 0.10.0 is available */
+#undef WITH_PCIACCESS
+
+/* whether to use pm-utils */
+#undef WITH_PM_UTILS
+
+/* use PolicyKit for UNIX socket access checks */
+#undef WITH_POLKIT
+
+/* whether QEMU driver is enabled */
+#undef WITH_QEMU
+
+/* whether libreadline is available */
+#undef WITH_READLINE
+
+/* whether Remote driver is enabled */
+#undef WITH_REMOTE
+
+/* whether libsanlock_client is available */
+#undef WITH_SANLOCK
+
+/* whether libsasl2 >= 2.1.26 is available */
+#undef WITH_SASL
+
+/* whether AppArmor security driver is available */
+#undef WITH_SECDRIVER_APPARMOR
+
+/* whether SELinux security driver is available */
+#undef WITH_SECDRIVER_SELINUX
+
+/* whether local secrets management driver is available */
+#undef WITH_SECRETS
+
+/* whether libselinux is available */
+#undef WITH_SELINUX
+
+/* whether libssh2 >= 1.3 is available */
+#undef WITH_SSH2
+
+/* Define to 1 if at least one storage backend is in use */
+#undef WITH_STORAGE
+
+/* whether directory backend for storage driver is enabled */
+#undef WITH_STORAGE_DIR
+
+/* whether Disk backend for storage driver is enabled */
+#undef WITH_STORAGE_DISK
+
+/* whether FS backend for storage driver is enabled */
+#undef WITH_STORAGE_FS
+
+/* whether Gluster backend for storage driver is enabled */
+#undef WITH_STORAGE_GLUSTER
+
+/* whether iSCSI backend for storage driver is enabled */
+#undef WITH_STORAGE_ISCSI
+
+/* whether iSCSI backend for storage driver is enabled */
+#undef WITH_STORAGE_ISCSI_DIRECT
+
+/* whether LVM backend for storage driver is enabled */
+#undef WITH_STORAGE_LVM
+
+/* whether mpath backend for storage driver is enabled */
+#undef WITH_STORAGE_MPATH
+
+/* whether RBD backend for storage driver is enabled */
+#undef WITH_STORAGE_RBD
+
+/* whether SCSI backend for storage driver is enabled */
+#undef WITH_STORAGE_SCSI
+
+/* whether Sheepdog backend for storage driver is enabled */
+#undef WITH_STORAGE_SHEEPDOG
+
+/* whether Vstorage backend for storage driver is enabled */
+#undef WITH_STORAGE_VSTORAGE
+
+/* whether ZFS backend for storage driver is enabled */
+#undef WITH_STORAGE_ZFS
+
+/* whether Test driver is enabled */
+#undef WITH_TEST
+
+/* whether libudev >= 219 is available */
+#undef WITH_UDEV
+
+/* whether VirtualBox driver is enabled */
+#undef WITH_VBOX
+
+/* whether vsi vepa support is enabled */
+#undef WITH_VIRTUALPORT
+
+/* whether VMware driver is enabled */
+#undef WITH_VMWARE
+
+/* whether VMware VMX config handling is enabled */
+#undef WITH_VMX
+
+/* whether vz driver is enabled */
+#undef WITH_VZ
+
+/* whether wireshark >= 2.4.0 is available */
+#undef WITH_WIRESHARK_DISSECTOR
+
+/* whether libyajl is available */
+#undef WITH_YAJL
+
+/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
+   significant byte first (like Motorola and SPARC, unlike Intel). */
+#if defined AC_APPLE_UNIVERSAL_BUILD
+# if defined __BIG_ENDIAN__
+#  define WORDS_BIGENDIAN 1
+# endif
+#else
+# ifndef WORDS_BIGENDIAN
+#  undef WORDS_BIGENDIAN
+# endif
+#endif
+
+/* Location of zfs program */
+#undef ZFS
+
+/* Location of zpool program */
+#undef ZPOOL
+
+/* Enable large inode numbers on Mac OS X 10.5. */
+#undef _DARWIN_USE_64_BIT_INODE
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+#undef _FILE_OFFSET_BITS
+
+/* Define to 1 to make fseeko visible on some hosts (e.g. glibc 2.2). */
+#undef _LARGEFILE_SOURCE
+
+/* Define for large files, on AIX-style hosts. */
+#undef _LARGE_FILES
+
+/* Define to 1 on Solaris. */
+#undef _LCONV_C99
+
+/* Define in order to get some macros on AIX systems. */
+#undef _LINUX_SOURCE_COMPAT
+
+/* Define to 1 if on MINIX. */
+#undef _MINIX
+
+/* Define to 1 to make NetBSD features available. MINIX 3 needs this. */
+#undef _NETBSD_SOURCE
+
+/* The _Noreturn keyword of C11.  */
+#ifndef _Noreturn
+# if (defined __cplusplus \
+      && ((201103 <= __cplusplus && !(__GNUC__ == 4 && __GNUC_MINOR__ == 7)) \
+          || (defined _MSC_VER && 1900 <= _MSC_VER)) \
+      && 0)
+    /* [[noreturn]] is not practically usable, because with it the syntax
+         extern _Noreturn void func (...);
+       would not be valid; such a declaration would only be valid with 'extern'
+       and '_Noreturn' swapped, or without the 'extern' keyword.  However, some
+       AIX system header files and several gnulib header files use precisely
+       this syntax with 'extern'.  */
+#  define _Noreturn [[noreturn]]
+# elif ((!defined __cplusplus || defined __clang__) \
+        && (201112 <= (defined __STDC_VERSION__ ? __STDC_VERSION__ : 0)  \
+            || 4 < __GNUC__ + (7 <= __GNUC_MINOR__)))
+   /* _Noreturn works as-is.  */
+# elif 2 < __GNUC__ + (8 <= __GNUC_MINOR__) || 0x5110 <= __SUNPRO_C
+#  define _Noreturn __attribute__ ((__noreturn__))
+# elif 1200 <= (defined _MSC_VER ? _MSC_VER : 0)
+#  define _Noreturn __declspec (noreturn)
+# else
+#  define _Noreturn
+# endif
+#endif
+
+
+/* Define to 2 if the system does not provide POSIX.1 features except with
+   this defined. */
+#undef _POSIX_1_SOURCE
+
+/* Define to 1 in order to get the POSIX compatible declarations of socket
+   functions. */
+#undef _POSIX_PII_SOCKET
+
+/* Define to 1 if you need to in order for 'stat' and other things to work. */
+#undef _POSIX_SOURCE
+
+/* For standard stat data types on VMS. */
+#undef _USE_STD_STAT
+
+/* Define to 1 if the system <stdint.h> predates C++11. */
+#undef __STDC_CONSTANT_MACROS
+
+/* Define to 1 if the system <stdint.h> predates C++11. */
+#undef __STDC_LIMIT_MACROS
+
+/* The _GL_ASYNC_SAFE marker should be attached to functions that are
+   signal handlers (for signals other than SIGABRT, SIGPIPE) or can be
+   invoked from such signal handlers.  Such functions have some restrictions:
+     * All functions that it calls should be marked _GL_ASYNC_SAFE as well,
+       or should be listed as async-signal-safe in POSIX
+       <https://pubs.opengroup.org/onlinepubs/9699919799/functions/V2_chap02.html#tag_15_04>
+       section 2.4.3.  Note that malloc(), sprintf(), and fwrite(), in
+       particular, are NOT async-signal-safe.
+     * All memory locations (variables and struct fields) that these functions
+       access must be marked 'volatile'.  This holds for both read and write
+       accesses.  Otherwise the compiler might optimize away stores to and
+       reads from such locations that occur in the program, depending on its
+       data flow analysis.  For example, when the program contains a loop
+       that is intended to inspect a variable set from within a signal handler
+           while (!signal_occurred)
+             ;
+       the compiler is allowed to transform this into an endless loop if the
+       variable 'signal_occurred' is not declared 'volatile'.
+   Additionally, recall that:
+     * A signal handler should not modify errno (except if it is a handler
+       for a fatal signal and ends by raising the same signal again, thus
+       provoking the termination of the process).  If it invokes a function
+       that may clobber errno, it needs to save and restore the value of
+       errno.  */
+#define _GL_ASYNC_SAFE
+
+
+/* Please see the Gnulib manual for how to use these macros.
+
+   Suppress extern inline with HP-UX cc, as it appears to be broken; see
+   <https://lists.gnu.org/r/bug-texinfo/2013-02/msg00030.html>.
+
+   Suppress extern inline with Sun C in standards-conformance mode, as it
+   mishandles inline functions that call each other.  E.g., for 'inline void f
+   (void) { } inline void g (void) { f (); }', c99 incorrectly complains
+   'reference to static identifier "f" in extern inline function'.
+   This bug was observed with Sun C 5.12 SunOS_i386 2011/11/16.
+
+   Suppress extern inline (with or without __attribute__ ((__gnu_inline__)))
+   on configurations that mistakenly use 'static inline' to implement
+   functions or macros in standard C headers like <ctype.h>.  For example,
+   if isdigit is mistakenly implemented via a static inline function,
+   a program containing an extern inline function that calls isdigit
+   may not work since the C standard prohibits extern inline functions
+   from calling static functions (ISO C 99 section 6.7.4.(3).
+   This bug is known to occur on:
+
+     OS X 10.8 and earlier; see:
+     https://lists.gnu.org/r/bug-gnulib/2012-12/msg00023.html
+
+     DragonFly; see
+     http://muscles.dragonflybsd.org/bulk/clang-master-potential/20141111_102002/logs/ah-tty-0.3.12.log
+
+     FreeBSD; see:
+     https://lists.gnu.org/r/bug-gnulib/2014-07/msg00104.html
+
+   OS X 10.9 has a macro __header_inline indicating the bug is fixed for C and
+   for clang but remains for g++; see <https://trac.macports.org/ticket/41033>.
+   Assume DragonFly and FreeBSD will be similar.
+
+   GCC 4.3 and above with -std=c99 or -std=gnu99 implements ISO C99
+   inline semantics, unless -fgnu89-inline is used.  It defines a macro
+   __GNUC_STDC_INLINE__ to indicate this situation or a macro
+   __GNUC_GNU_INLINE__ to indicate the opposite situation.
+   GCC 4.2 with -std=c99 or -std=gnu99 implements the GNU C inline
+   semantics but warns, unless -fgnu89-inline is used:
+     warning: C99 inline functions are not supported; using GNU89
+     warning: to disable this warning use -fgnu89-inline or the gnu_inline function attribute
+   It defines a macro __GNUC_GNU_INLINE__ to indicate this situation.
+ */
+#if (((defined __APPLE__ && defined __MACH__) \
+      || defined __DragonFly__ || defined __FreeBSD__) \
+     && (defined __header_inline \
+         ? (defined __cplusplus && defined __GNUC_STDC_INLINE__ \
+            && ! defined __clang__) \
+         : ((! defined _DONT_USE_CTYPE_INLINE_ \
+             && (defined __GNUC__ || defined __cplusplus)) \
+            || (defined _FORTIFY_SOURCE && 0 < _FORTIFY_SOURCE \
+                && defined __GNUC__ && ! defined __cplusplus))))
+# define _GL_EXTERN_INLINE_STDHEADER_BUG
+#endif
+#if ((__GNUC__ \
+      ? defined __GNUC_STDC_INLINE__ && __GNUC_STDC_INLINE__ \
+      : (199901L <= __STDC_VERSION__ \
+         && !defined __HP_cc \
+         && !defined __PGI \
+         && !(defined __SUNPRO_C && __STDC__))) \
+     && !defined _GL_EXTERN_INLINE_STDHEADER_BUG)
+# define _GL_INLINE inline
+# define _GL_EXTERN_INLINE extern inline
+# define _GL_EXTERN_INLINE_IN_USE
+#elif (2 < __GNUC__ + (7 <= __GNUC_MINOR__) && !defined __STRICT_ANSI__ \
+       && !defined _GL_EXTERN_INLINE_STDHEADER_BUG)
+# if defined __GNUC_GNU_INLINE__ && __GNUC_GNU_INLINE__
+   /* __gnu_inline__ suppresses a GCC 4.2 diagnostic.  */
+#  define _GL_INLINE extern inline __attribute__ ((__gnu_inline__))
+# else
+#  define _GL_INLINE extern inline
+# endif
+# define _GL_EXTERN_INLINE extern
+# define _GL_EXTERN_INLINE_IN_USE
+#else
+# define _GL_INLINE static _GL_UNUSED
+# define _GL_EXTERN_INLINE static _GL_UNUSED
+#endif
+
+/* In GCC 4.6 (inclusive) to 5.1 (exclusive),
+   suppress bogus "no previous prototype for 'FOO'"
+   and "no previous declaration for 'FOO'" diagnostics,
+   when FOO is an inline function in the header; see
+   <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54113> and
+   <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63877>.  */
+#if __GNUC__ == 4 && 6 <= __GNUC_MINOR__
+# if defined __GNUC_STDC_INLINE__ && __GNUC_STDC_INLINE__
+#  define _GL_INLINE_HEADER_CONST_PRAGMA
+# else
+#  define _GL_INLINE_HEADER_CONST_PRAGMA \
+     _Pragma ("GCC diagnostic ignored \"-Wsuggest-attribute=const\"")
+# endif
+# define _GL_INLINE_HEADER_BEGIN \
+    _Pragma ("GCC diagnostic push") \
+    _Pragma ("GCC diagnostic ignored \"-Wmissing-prototypes\"") \
+    _Pragma ("GCC diagnostic ignored \"-Wmissing-declarations\"") \
+    _GL_INLINE_HEADER_CONST_PRAGMA
+# define _GL_INLINE_HEADER_END \
+    _Pragma ("GCC diagnostic pop")
+#else
+# define _GL_INLINE_HEADER_BEGIN
+# define _GL_INLINE_HEADER_END
+#endif
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef gid_t
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+   calls it, or to nothing if 'inline' is not supported under any name.  */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define to long or long long if <stdint.h> and <inttypes.h> don't define. */
+#undef intmax_t
+
+/* Work around a bug in Apple GCC 4.0.1 build 5465: In C99 mode, it supports
+   the ISO C 99 semantics of 'extern inline' (unlike the GNU C semantics of
+   earlier versions), but does not display it by setting __GNUC_STDC_INLINE__.
+   __APPLE__ && __MACH__ test for Mac OS X.
+   __APPLE_CC__ tests for the Apple compiler and its version.
+   __STDC_VERSION__ tests for the C99 mode.  */
+#if defined __APPLE__ && defined __MACH__ && __APPLE_CC__ >= 5465 && !defined __cplusplus && __STDC_VERSION__ >= 199901L && !defined __GNUC_STDC_INLINE__
+# define __GNUC_STDC_INLINE__ 1
+#endif
+
+/* Define to 1 if the compiler is checking for lint. */
+#undef lint
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef mode_t
+
+/* Define to the type of st_nlink in struct stat, or a supertype. */
+#undef nlink_t
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef pid_t
+
+/* Define as the type of the result of subtracting two pointers, if the system
+   doesn't define it. */
+#undef ptrdiff_t
+
+/* Define to the equivalent of the C99 'restrict' keyword, or to
+   nothing if this is not supported.  Do not define if restrict is
+   supported directly.  */
+#undef restrict
+/* Work around a bug in older versions of Sun C++, which did not
+   #define __restrict__ or support _Restrict or __restrict__
+   even though the corresponding Sun C compiler ended up with
+   "#define restrict _Restrict" or "#define restrict __restrict__"
+   in the previous line.  This workaround can be removed once
+   we assume Oracle Developer Studio 12.5 (2016) or later.  */
+#if defined __SUNPRO_CC && !defined __RESTRICT && !defined __restrict__
+# define _Restrict
+# define __restrict__
+#endif
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
+
+/* type to use in place of socklen_t if not defined */
+#undef socklen_t
+
+/* ssh_get_publickey is deprecated and replaced by ssh_get_server_publickey.
+   */
+#undef ssh_get_server_publickey
+
+/* ssh_is_server_known is deprecated and replaced by
+   ssh_session_is_known_server. */
+#undef ssh_session_is_known_server
+
+/* ssh_write_knownhost is deprecated and replaced by
+   ssh_session_update_known_hosts. */
+#undef ssh_session_update_known_hosts
+
+/* Define as a signed type of the same size as size_t. */
+#undef ssize_t
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef uid_t
+
+/* Define as a marker that can be attached to declarations that might not
+    be used.  This helps to reduce warnings, such as from
+    GCC -Wunused-parameter.  */
+#if __GNUC__ >= 3 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 7)
+# define _GL_UNUSED __attribute__ ((__unused__))
+#else
+# define _GL_UNUSED
+#endif
+/* The name _UNUSED_PARAMETER_ is an earlier spelling, although the name
+   is a misnomer outside of parameter lists.  */
+#define _UNUSED_PARAMETER_ _GL_UNUSED
+
+/* gcc supports the "unused" attribute on possibly unused labels, and
+   g++ has since version 4.5.  Note to support C++ as well as C,
+   _GL_UNUSED_LABEL should be used with a trailing ;  */
+#if !defined __cplusplus || __GNUC__ > 4 \
+    || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+# define _GL_UNUSED_LABEL _GL_UNUSED
+#else
+# define _GL_UNUSED_LABEL
+#endif
+
+/* The __pure__ attribute was added in gcc 2.96.  */
+#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 96)
+# define _GL_ATTRIBUTE_PURE __attribute__ ((__pure__))
+#else
+# define _GL_ATTRIBUTE_PURE /* empty */
+#endif
+
+/* The __const__ attribute was added in gcc 2.95.  */
+#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
+# define _GL_ATTRIBUTE_CONST __attribute__ ((__const__))
+#else
+# define _GL_ATTRIBUTE_CONST /* empty */
+#endif
+
+/* The __malloc__ attribute was added in gcc 3.  */
+#if 3 <= __GNUC__
+# define _GL_ATTRIBUTE_MALLOC __attribute__ ((__malloc__))
+#else
+# define _GL_ATTRIBUTE_MALLOC /* empty */
+#endif
+
+
+#include <config-post.h>
diff --git a/configure b/configure
new file mode 100755
index 0000000000..9b30ea07fd
--- /dev/null
+++ b/configure
@@ -0,0 +1,56615 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for libvirt 6.0.0.
+#
+# Report bugs to <libvir-list@redhat.com>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: libvir-list@redhat.com about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='libvirt'
+PACKAGE_TARNAME='libvirt'
+PACKAGE_VERSION='6.0.0'
+PACKAGE_STRING='libvirt 6.0.0'
+PACKAGE_BUGREPORT='libvir-list@redhat.com'
+PACKAGE_URL='https://libvirt.org'
+
+ac_unique_file="src/libvirt.c"
+: "${ARFLAGS=cr} ${AR_FLAGS=cr}"
+with_packager=no
+with_packager_version=no
+with_system=no
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+gl_use_threads_default=
+gl_use_winpthreads_default=
+ac_header_list=
+ac_func_list=
+enable_werror=check
+with_apparmor=check
+with_apparmor_mount=check
+with_attr=check
+with_audit=check
+with_bash_completion=check
+with_bash_completions_dir=check
+with_blkid=check
+with_capng=check
+with_curl=check
+with_dbus=check
+with_firewalld=check
+with_firewalld_zone=check
+with_fuse=check
+with_glusterfs=check
+with_hal=check
+with_libiscsi=check
+with_libpcap=check
+with_libssh=check
+with_libxml=check
+with_macvtap=check
+with_netcf=check
+enable_nls=check
+with_nss_plugin=check
+with_numactl=check
+with_openwsman=check
+with_pciaccess=check
+with_pm_utils=check
+with_polkit=check
+with_readline=check
+with_sanlock=check
+with_sasl=check
+with_selinux=check
+with_selinux_mount=check
+with_ssh2=check
+with_udev=check
+with_virtualport=check
+with_wireshark_dissector=check
+with_ws_plugindir=check
+with_yajl=check
+with_qemu=check
+with_qemu_user='platform dependent'
+with_qemu_group='platform dependent'
+with_openvz=check
+with_vmware=yes
+with_libxl=check
+with_vbox=yes
+with_lxc=check
+with_vz=check
+with_bhyve=check
+with_esx=check
+with_hyperv=check
+with_test=yes
+with_remote=yes
+with_remote_default_mode=legacy
+with_libvirtd=yes
+with_network=yes
+with_interface=check
+enable_debug=yes
+with_dtrace=check
+with_numad=check
+with_init_script=check
+with_chrdev_lock_files=auto
+with_default_editor=vi
+with_loader_nvram=''
+with_login_shell=check
+with_host_validate=check
+with_tls_priority=NORMAL
+with_sysctl=check
+with_secdriver_selinux=check
+with_secdriver_apparmor=check
+with_apparmor_profiles=no
+with_secrets=yes
+with_storage_dir=yes
+with_storage_fs=check
+with_storage_lvm=check
+with_storage_iscsi=check
+with_storage_iscsi_direct=check
+with_storage_scsi=check
+with_storage_mpath=check
+with_storage_disk=check
+with_storage_rbd=check
+with_storage_sheepdog=check
+with_storage_gluster=check
+with_storage_zfs=check
+with_storage_vstorage=check
+with_test_suite=check
+enable_expensive_tests=check
+enable_test_coverage=no
+with_driver_modules=yes
+ac_subst_vars='gltests_LTLIBOBJS
+gltests_LIBOBJS
+gl_LTLIBOBJS
+gl_LIBOBJS
+am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+IFCONFIG_PATH
+WITH_NODE_DEVICES_FALSE
+WITH_NODE_DEVICES_TRUE
+LV_LIBTOOL_OBJDIR
+DRIVER_MODULES_LIBS
+DRIVER_MODULES_LDFLAGS
+WITH_WIN_ICON_FALSE
+WITH_WIN_ICON_TRUE
+WINDRES
+LIBVIRT_QEMU_SYMBOL_FILE
+LIBVIRT_LXC_SYMBOL_FILE
+LIBVIRT_ADMIN_SYMBOL_FILE
+LIBVIRT_SYMBOL_FILE
+MINGW_EXTRA_LDFLAGS
+CYGWIN_EXTRA_LIBADD
+CYGWIN_EXTRA_LDFLAGS
+WIN32_EXTRA_LIBS
+WIN32_EXTRA_CFLAGS
+COVERAGE_LDFLAGS
+COVERAGE_CFLAGS
+WITH_EXPENSIVE_TESTS_FALSE
+WITH_EXPENSIVE_TESTS_TRUE
+VIR_TEST_EXPENSIVE_DEFAULT
+WITH_TESTS_FALSE
+WITH_TESTS_TRUE
+PERL
+RUNUTF8
+FLAKE8
+PYTHON
+WITH_STORAGE_FALSE
+WITH_STORAGE_TRUE
+WITH_STORAGE_VSTORAGE_FALSE
+WITH_STORAGE_VSTORAGE_TRUE
+VSTORAGE_MOUNT
+VSTORAGE
+WITH_STORAGE_ZFS_FALSE
+WITH_STORAGE_ZFS_TRUE
+ZPOOL
+ZFS
+WITH_STORAGE_GLUSTER_FALSE
+WITH_STORAGE_GLUSTER_TRUE
+WITH_STORAGE_SHEEPDOG_FALSE
+WITH_STORAGE_SHEEPDOG_TRUE
+SHEEPDOGCLI
+LIBRBD_LIBS
+WITH_STORAGE_RBD_FALSE
+WITH_STORAGE_RBD_TRUE
+WITH_STORAGE_DISK_FALSE
+WITH_STORAGE_DISK_TRUE
+WITH_STORAGE_MPATH_FALSE
+WITH_STORAGE_MPATH_TRUE
+WITH_STORAGE_SCSI_FALSE
+WITH_STORAGE_SCSI_TRUE
+WITH_STORAGE_ISCSI_DIRECT_FALSE
+WITH_STORAGE_ISCSI_DIRECT_TRUE
+WITH_STORAGE_ISCSI_FALSE
+WITH_STORAGE_ISCSI_TRUE
+ISCSIADM
+WITH_STORAGE_LVM_FALSE
+WITH_STORAGE_LVM_TRUE
+LVS
+VGS
+PVS
+VGSCAN
+VGCHANGE
+LVCHANGE
+LVREMOVE
+VGREMOVE
+PVREMOVE
+LVCREATE
+VGCREATE
+PVCREATE
+SHOWMOUNT
+WITH_STORAGE_FS_FALSE
+WITH_STORAGE_FS_TRUE
+MKFS
+UMOUNT
+MOUNT
+WITH_STORAGE_DIR_FALSE
+WITH_STORAGE_DIR_TRUE
+WITH_SECRETS_FALSE
+WITH_SECRETS_TRUE
+WITH_APPARMOR_PROFILES_FALSE
+WITH_APPARMOR_PROFILES_TRUE
+WITH_SECDRIVER_APPARMOR_FALSE
+WITH_SECDRIVER_APPARMOR_TRUE
+WITH_SECDRIVER_SELINUX_FALSE
+WITH_SECDRIVER_SELINUX_TRUE
+WITH_BSD_NSS_FALSE
+WITH_BSD_NSS_TRUE
+WITH_NSS_FALSE
+WITH_NSS_TRUE
+WITH_SYSCTL_FALSE
+WITH_SYSCTL_TRUE
+WITH_HOST_VALIDATE_FALSE
+WITH_HOST_VALIDATE_TRUE
+WITH_LOGIN_SHELL_FALSE
+WITH_LOGIN_SHELL_TRUE
+VIR_CHRDEV_LOCK_FILE_PATH_FALSE
+VIR_CHRDEV_LOCK_FILE_PATH_TRUE
+HAVE_NUMAD_FALSE
+HAVE_NUMAD_TRUE
+NUMAD
+WITH_DTRACE_PROBES_FALSE
+WITH_DTRACE_PROBES_TRUE
+DTRACE
+ENABLE_DEBUG_FALSE
+ENABLE_DEBUG_TRUE
+STATIC_BINARIES
+WITH_INTERFACE_FALSE
+WITH_INTERFACE_TRUE
+WITH_BRIDGE_FALSE
+WITH_BRIDGE_TRUE
+WITH_NETWORK_FALSE
+WITH_NETWORK_TRUE
+WITH_LIBVIRTD_FALSE
+WITH_LIBVIRTD_TRUE
+WITH_REMOTE_FALSE
+WITH_REMOTE_TRUE
+WITH_TEST_FALSE
+WITH_TEST_TRUE
+WITH_HYPERV_FALSE
+WITH_HYPERV_TRUE
+WITH_VMX_FALSE
+WITH_VMX_TRUE
+WITH_ESX_FALSE
+WITH_ESX_TRUE
+WITH_BHYVE_FALSE
+WITH_BHYVE_TRUE
+BHYVELOAD
+BHYVECTL
+BHYVE
+WITH_VZ_FALSE
+WITH_VZ_TRUE
+PARALLELS_SDK_LIBS
+PARALLELS_SDK_CFLAGS
+WITH_LXC_FALSE
+WITH_LXC_TRUE
+WITH_VBOX_FALSE
+WITH_VBOX_TRUE
+WITH_LIBXL_FALSE
+WITH_LIBXL_TRUE
+LIBXL_LIBS
+LIBXL_CFLAGS
+WITH_VMWARE_FALSE
+WITH_VMWARE_TRUE
+WITH_OPENVZ_FALSE
+WITH_OPENVZ_TRUE
+QEMU_SLIRP_HELPER
+QEMU_PR_HELPER
+QEMU_BRIDGE_HELPER
+WITH_QEMU_FALSE
+WITH_QEMU_TRUE
+EBTABLES_PATH
+IP6TABLES_PATH
+IPTABLES_PATH
+IP_PATH
+ADDR2LINE
+SCRUB
+OVSVSCTL
+MMCTL
+RMMOD
+MODPROBE
+UDEVADM
+TC
+RADVD
+DNSMASQ
+DMIDECODE
+AUGPARSE
+RST2MAN
+RST2HTML
+XSLTPROC
+XMLLINT
+HAVE_RPCGEN_FALSE
+HAVE_RPCGEN_TRUE
+RPCGEN
+HAVE_LIBTASN1_FALSE
+HAVE_LIBTASN1_TRUE
+WITH_YAJL_FALSE
+WITH_YAJL_TRUE
+YAJL_LIBS
+YAJL_CFLAGS
+XDR_CFLAGS
+ws_plugindir
+WITH_WIRESHARK_DISSECTOR_FALSE
+WITH_WIRESHARK_DISSECTOR_TRUE
+WIRESHARK_DISSECTOR_LIBS
+WIRESHARK_DISSECTOR_CFLAGS
+WITH_VIRTUALPORT_FALSE
+WITH_VIRTUALPORT_TRUE
+WITH_UDEV_FALSE
+WITH_UDEV_TRUE
+UDEV_LIBS
+UDEV_CFLAGS
+WITH_SSH2_FALSE
+WITH_SSH2_TRUE
+SSH2_LIBS
+SSH2_CFLAGS
+SELINUX_LIBS
+SELINUX_CFLAGS
+WITH_SELINUX_FALSE
+WITH_SELINUX_TRUE
+WITH_SASL_FALSE
+WITH_SASL_TRUE
+SASL_LIBS
+SASL_CFLAGS
+SANLOCK_LIBS
+SANLOCK_CFLAGS
+WITH_SANLOCK_FALSE
+WITH_SANLOCK_TRUE
+WITH_POLKIT_FALSE
+WITH_POLKIT_TRUE
+PKCHECK_PATH
+WITH_PM_UTILS_FALSE
+WITH_PM_UTILS_TRUE
+LIBVIRT_INIT_SCRIPT_OPENRC_FALSE
+LIBVIRT_INIT_SCRIPT_OPENRC_TRUE
+LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
+LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE
+WITH_PCIACCESS_FALSE
+WITH_PCIACCESS_TRUE
+PCIACCESS_LIBS
+PCIACCESS_CFLAGS
+WITH_OPENWSMAN_FALSE
+WITH_OPENWSMAN_TRUE
+OPENWSMAN_LIBS
+OPENWSMAN_CFLAGS
+WITH_NWFILTER_FALSE
+WITH_NWFILTER_TRUE
+NUMACTL_LIBS
+NUMACTL_CFLAGS
+WITH_NUMACTL_FALSE
+WITH_NUMACTL_TRUE
+HAVE_GNU_GETTEXT_TOOLS_FALSE
+HAVE_GNU_GETTEXT_TOOLS_TRUE
+ENABLE_NLS_FALSE
+ENABLE_NLS_TRUE
+MSGMERGE
+MSGFMT
+XGETTEXT
+WITH_NETCF_FALSE
+WITH_NETCF_TRUE
+NETCF_LIBS
+NETCF_CFLAGS
+WITH_LIBXML_FALSE
+WITH_LIBXML_TRUE
+LIBXML_LIBS
+LIBXML_CFLAGS
+WITH_LIBSSH_FALSE
+WITH_LIBSSH_TRUE
+LIBSSH_LIBS
+LIBSSH_CFLAGS
+LIBPCAP_LIBS
+LIBPCAP_CFLAGS
+PARTED
+WITH_LIBPARTED_FALSE
+WITH_LIBPARTED_TRUE
+LIBPARTED_LIBS
+LIBPARTED_CFLAGS
+HAVE_LIBNL_FALSE
+HAVE_LIBNL_TRUE
+LIBNL_ROUTE_LIBS
+LIBNL_ROUTE_CFLAGS
+LIBNL_LIBS
+LIBNL_CFLAGS
+WITH_MACVTAP_FALSE
+WITH_MACVTAP_TRUE
+WITH_LIBISCSI_FALSE
+WITH_LIBISCSI_TRUE
+LIBISCSI_LIBS
+LIBISCSI_CFLAGS
+WITH_HAL_FALSE
+WITH_HAL_TRUE
+HAL_LIBS
+HAL_CFLAGS
+WITH_GNUTLS_FALSE
+WITH_GNUTLS_TRUE
+GNUTLS_LIBS
+GNUTLS_CFLAGS
+WITH_GLUSTERFS_FALSE
+WITH_GLUSTERFS_TRUE
+GLUSTERFS_LIBS
+GLUSTERFS_CFLAGS
+WITH_GLIB_FALSE
+WITH_GLIB_TRUE
+GLIB_LIBS
+GLIB_CFLAGS
+WITH_FUSE_FALSE
+WITH_FUSE_TRUE
+FUSE_LIBS
+FUSE_CFLAGS
+WITH_FIREWALLD_ZONE_FALSE
+WITH_FIREWALLD_ZONE_TRUE
+WITH_FIREWALLD_FALSE
+WITH_FIREWALLD_TRUE
+DLOPEN_LIBS
+WITH_DEVMAPPER_FALSE
+WITH_DEVMAPPER_TRUE
+DEVMAPPER_LIBS
+DEVMAPPER_CFLAGS
+WITH_DBUS_FALSE
+WITH_DBUS_TRUE
+DBUS_LIBS
+DBUS_CFLAGS
+WITH_CURL_FALSE
+WITH_CURL_TRUE
+CURL_LIBS
+CURL_CFLAGS
+CAPNG_LIBS
+CAPNG_CFLAGS
+WITH_CAPNG_FALSE
+WITH_CAPNG_TRUE
+WITH_BLKID_FALSE
+WITH_BLKID_TRUE
+BLKID_LIBS
+BLKID_CFLAGS
+BASH_COMPLETIONS_DIR
+WITH_BASH_COMPLETION_FALSE
+WITH_BASH_COMPLETION_TRUE
+BASH_COMPLETION_LIBS
+BASH_COMPLETION_CFLAGS
+WITH_READLINE_FALSE
+WITH_READLINE_TRUE
+READLINE_LIBS
+READLINE_CFLAGS
+PKG_CONFIG_LIBDIR
+PKG_CONFIG_PATH
+PKG_CONFIG
+AUDIT_LIBS
+AUDIT_CFLAGS
+WITH_AUDIT_FALSE
+WITH_AUDIT_TRUE
+ATTR_LIBS
+ATTR_CFLAGS
+WITH_ATTR_FALSE
+WITH_ATTR_TRUE
+WITH_ATOMIC_OPS_PTHREAD_FALSE
+WITH_ATOMIC_OPS_PTHREAD_TRUE
+APPARMOR_LIBS
+APPARMOR_CFLAGS
+WITH_APPARMOR_FALSE
+WITH_APPARMOR_TRUE
+ACL_LIBS
+ACL_CFLAGS
+NO_UNDEFINED_LDFLAGS
+NO_INDIRECT_LDFLAGS
+RELRO_LDFLAGS
+PIE_LDFLAGS
+PIE_CFLAGS
+WARN_CFLAGS
+RELAXED_FRAME_LIMIT_CFLAGS
+WITH_MACOS_FALSE
+WITH_MACOS_TRUE
+WITH_FREEBSD_FALSE
+WITH_FREEBSD_TRUE
+WITH_LINUX_FALSE
+WITH_LINUX_TRUE
+VERSION_SCRIPT_FLAGS
+LIBVIRT_NODELETE
+LT_SYS_LIBRARY_PATH
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+ac_ct_AR
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+SED
+LIBTOOL
+OBJDUMP
+DLLTOOL
+AS
+gltests_WITNESS
+REPLACE_TOWLOWER
+REPLACE_ISWCNTRL
+HAVE_WCTYPE_H
+NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H
+NEXT_WCTYPE_H
+HAVE_ISWCNTRL
+REPLACE_ISWBLANK
+HAVE_WCTRANS_T
+HAVE_WCTYPE_T
+HAVE_ISWBLANK
+GNULIB_TOWCTRANS
+GNULIB_WCTRANS
+GNULIB_ISWCTYPE
+GNULIB_WCTYPE
+GNULIB_ISWBLANK
+HAVE_CRTDEFS_H
+HAVE_WINT_T
+NEXT_AS_FIRST_DIRECTIVE_WCHAR_H
+NEXT_WCHAR_H
+REPLACE_WCSTOK
+REPLACE_WCSFTIME
+REPLACE_WCSWIDTH
+REPLACE_WCWIDTH
+REPLACE_WCSNRTOMBS
+REPLACE_WCSRTOMBS
+REPLACE_WCRTOMB
+REPLACE_MBSNRTOWCS
+REPLACE_MBSRTOWCS
+REPLACE_MBRLEN
+REPLACE_MBRTOWC
+REPLACE_MBSINIT
+REPLACE_WCTOB
+REPLACE_BTOWC
+REPLACE_MBSTATE_T
+HAVE_DECL_WCWIDTH
+HAVE_DECL_WCTOB
+HAVE_WCSFTIME
+HAVE_WCSWIDTH
+HAVE_WCSTOK
+HAVE_WCSSTR
+HAVE_WCSPBRK
+HAVE_WCSSPN
+HAVE_WCSCSPN
+HAVE_WCSRCHR
+HAVE_WCSCHR
+HAVE_WCSDUP
+HAVE_WCSXFRM
+HAVE_WCSCOLL
+HAVE_WCSNCASECMP
+HAVE_WCSCASECMP
+HAVE_WCSNCMP
+HAVE_WCSCMP
+HAVE_WCSNCAT
+HAVE_WCSCAT
+HAVE_WCPNCPY
+HAVE_WCSNCPY
+HAVE_WCPCPY
+HAVE_WCSCPY
+HAVE_WCSNLEN
+HAVE_WCSLEN
+HAVE_WMEMSET
+HAVE_WMEMMOVE
+HAVE_WMEMCPY
+HAVE_WMEMCMP
+HAVE_WMEMCHR
+HAVE_WCSNRTOMBS
+HAVE_WCSRTOMBS
+HAVE_WCRTOMB
+HAVE_MBSNRTOWCS
+HAVE_MBSRTOWCS
+HAVE_MBRLEN
+HAVE_MBRTOWC
+HAVE_MBSINIT
+HAVE_BTOWC
+GNULIB_WCSFTIME
+GNULIB_WCSWIDTH
+GNULIB_WCSTOK
+GNULIB_WCSSTR
+GNULIB_WCSPBRK
+GNULIB_WCSSPN
+GNULIB_WCSCSPN
+GNULIB_WCSRCHR
+GNULIB_WCSCHR
+GNULIB_WCSDUP
+GNULIB_WCSXFRM
+GNULIB_WCSCOLL
+GNULIB_WCSNCASECMP
+GNULIB_WCSCASECMP
+GNULIB_WCSNCMP
+GNULIB_WCSCMP
+GNULIB_WCSNCAT
+GNULIB_WCSCAT
+GNULIB_WCPNCPY
+GNULIB_WCSNCPY
+GNULIB_WCPCPY
+GNULIB_WCSCPY
+GNULIB_WCSNLEN
+GNULIB_WCSLEN
+GNULIB_WMEMSET
+GNULIB_WMEMMOVE
+GNULIB_WMEMCPY
+GNULIB_WMEMCMP
+GNULIB_WMEMCHR
+GNULIB_WCWIDTH
+GNULIB_WCSNRTOMBS
+GNULIB_WCSRTOMBS
+GNULIB_WCRTOMB
+GNULIB_MBSNRTOWCS
+GNULIB_MBSRTOWCS
+GNULIB_MBRLEN
+GNULIB_MBRTOWC
+GNULIB_MBSINIT
+GNULIB_WCTOB
+GNULIB_BTOWC
+LIBUNISTRING_COMPILE_UNIWIDTH_WIDTH_FALSE
+LIBUNISTRING_COMPILE_UNIWIDTH_WIDTH_TRUE
+LIBUNISTRING_UNIWIDTH_H
+LIBUNISTRING_UNITYPES_H
+HAVE_UNISTD_H
+NEXT_AS_FIRST_DIRECTIVE_UNISTD_H
+NEXT_UNISTD_H
+UNISTD_H_DEFINES_STRUCT_TIMESPEC
+PTHREAD_H_DEFINES_STRUCT_TIMESPEC
+SYS_TIME_H_DEFINES_STRUCT_TIMESPEC
+TIME_H_DEFINES_STRUCT_TIMESPEC
+NEXT_AS_FIRST_DIRECTIVE_TIME_H
+NEXT_TIME_H
+REPLACE_LOCALTIME
+REPLACE_GMTIME
+REPLACE_TZSET
+REPLACE_TIMEGM
+REPLACE_STRFTIME
+REPLACE_NANOSLEEP
+REPLACE_MKTIME
+REPLACE_LOCALTIME_R
+REPLACE_CTIME
+HAVE_TIMEZONE_T
+HAVE_TZSET
+HAVE_TIMEGM
+HAVE_STRPTIME
+HAVE_NANOSLEEP
+HAVE_DECL_LOCALTIME_R
+GNULIB_TZSET
+GNULIB_TIME_RZ
+GNULIB_TIME_R
+GNULIB_TIMEGM
+GNULIB_STRPTIME
+GNULIB_STRFTIME
+GNULIB_NANOSLEEP
+GNULIB_LOCALTIME
+GNULIB_MKTIME
+GNULIB_CTIME
+NEXT_AS_FIRST_DIRECTIVE_TERMIOS_H
+NEXT_TERMIOS_H
+HAVE_TERMIOS_H
+HAVE_DECL_TCGETSID
+GNULIB_TCGETSID
+NEXT_AS_FIRST_DIRECTIVE_SYS_WAIT_H
+NEXT_SYS_WAIT_H
+GNULIB_WAITPID
+HAVE_SYS_UTSNAME_H
+NEXT_AS_FIRST_DIRECTIVE_SYS_UTSNAME_H
+NEXT_SYS_UTSNAME_H
+HAVE_STRUCT_UTSNAME
+HAVE_UNAME
+GNULIB_UNAME
+HAVE_SYS_UIO_H
+NEXT_AS_FIRST_DIRECTIVE_SYS_UIO_H
+NEXT_SYS_UIO_H
+NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H
+NEXT_SYS_TIME_H
+REPLACE_STRUCT_TIMEVAL
+REPLACE_GETTIMEOFDAY
+HAVE_SYS_TIME_H
+HAVE_STRUCT_TIMEVAL
+HAVE_GETTIMEOFDAY
+GNULIB_GETTIMEOFDAY
+NEXT_AS_FIRST_DIRECTIVE_SYS_IOCTL_H
+NEXT_SYS_IOCTL_H
+HAVE_SYS_IOCTL_H
+NEXT_AS_FIRST_DIRECTIVE_STRING_H
+NEXT_STRING_H
+NEXT_AS_FIRST_DIRECTIVE_STDLIB_H
+NEXT_STDLIB_H
+NEXT_AS_FIRST_DIRECTIVE_STDIO_H
+NEXT_STDIO_H
+GL_GENERATE_STDINT_H_FALSE
+GL_GENERATE_STDINT_H_TRUE
+STDINT_H
+HAVE_SYS_INTTYPES_H
+HAVE_SYS_BITYPES_H
+HAVE_C99_STDINT_H
+WINT_T_SUFFIX
+WCHAR_T_SUFFIX
+SIG_ATOMIC_T_SUFFIX
+SIZE_T_SUFFIX
+PTRDIFF_T_SUFFIX
+HAVE_SIGNED_WINT_T
+HAVE_SIGNED_WCHAR_T
+HAVE_SIGNED_SIG_ATOMIC_T
+BITSIZEOF_WINT_T
+BITSIZEOF_WCHAR_T
+BITSIZEOF_SIG_ATOMIC_T
+BITSIZEOF_SIZE_T
+BITSIZEOF_PTRDIFF_T
+HAVE_STDINT_H
+NEXT_AS_FIRST_DIRECTIVE_STDINT_H
+NEXT_STDINT_H
+HAVE_SYS_TYPES_H
+HAVE_INTTYPES_H
+HAVE_WCHAR_H
+GNULIB_OVERRIDES_WINT_T
+HAVE__BOOL
+GL_GENERATE_STDBOOL_H_FALSE
+GL_GENERATE_STDBOOL_H_TRUE
+STDBOOL_H
+GL_GENERATE_STDALIGN_H_FALSE
+GL_GENERATE_STDALIGN_H_TRUE
+STDALIGN_H
+NEXT_AS_FIRST_DIRECTIVE_SIGNAL_H
+NEXT_SIGNAL_H
+LIB_SELECT
+HAVE_SYS_SELECT_H
+NEXT_AS_FIRST_DIRECTIVE_SYS_SELECT_H
+NEXT_SYS_SELECT_H
+REPLACE_SELECT
+REPLACE_PSELECT
+HAVE_PSELECT
+GNULIB_SELECT
+GNULIB_PSELECT
+HAVE_SYS_CDEFS_H
+HAVE_STRUCT_SCHED_PARAM
+HAVE_SCHED_H
+NEXT_AS_FIRST_DIRECTIVE_SCHED_H
+NEXT_SCHED_H
+REPLACE_SCHED_YIELD
+HAVE_SCHED_YIELD
+GNULIB_SCHED_YIELD
+LIB_PTHREAD_SIGMASK
+REPLACE_RAISE
+REPLACE_PTHREAD_SIGMASK
+HAVE_SIGHANDLER_T
+HAVE_TYPE_VOLATILE_SIG_ATOMIC_T
+HAVE_STRUCT_SIGACTION_SA_SIGACTION
+HAVE_SIGACTION
+HAVE_SIGINFO_T
+HAVE_SIGSET_T
+HAVE_RAISE
+HAVE_PTHREAD_SIGMASK
+HAVE_POSIX_SIGNALBLOCKING
+GNULIB_SIGACTION
+GNULIB_SIGPROCMASK
+GNULIB_SIGNAL_H_SIGPIPE
+GNULIB_RAISE
+GNULIB_PTHREAD_SIGMASK
+LIB_PTHREAD
+HAVE_PTHREAD_H
+LTLIBMULTITHREAD
+LIBMULTITHREAD
+LTLIBTHREAD
+LIBTHREAD
+LIBSTDTHREAD
+NEXT_AS_FIRST_DIRECTIVE_PTHREAD_H
+NEXT_PTHREAD_H
+LIB_SCHED_YIELD
+LIBPMULTITHREAD
+LIBPTHREAD
+REPLACE_PTHREAD_SPIN_DESTROY
+REPLACE_PTHREAD_SPIN_UNLOCK
+REPLACE_PTHREAD_SPIN_TRYLOCK
+REPLACE_PTHREAD_SPIN_LOCK
+REPLACE_PTHREAD_SPIN_INIT
+REPLACE_PTHREAD_KEY_DELETE
+REPLACE_PTHREAD_GETSPECIFIC
+REPLACE_PTHREAD_SETSPECIFIC
+REPLACE_PTHREAD_KEY_CREATE
+REPLACE_PTHREAD_COND_DESTROY
+REPLACE_PTHREAD_COND_BROADCAST
+REPLACE_PTHREAD_COND_SIGNAL
+REPLACE_PTHREAD_COND_TIMEDWAIT
+REPLACE_PTHREAD_COND_WAIT
+REPLACE_PTHREAD_CONDATTR_DESTROY
+REPLACE_PTHREAD_CONDATTR_INIT
+REPLACE_PTHREAD_COND_INIT
+REPLACE_PTHREAD_RWLOCK_DESTROY
+REPLACE_PTHREAD_RWLOCK_UNLOCK
+REPLACE_PTHREAD_RWLOCK_TIMEDWRLOCK
+REPLACE_PTHREAD_RWLOCK_TIMEDRDLOCK
+REPLACE_PTHREAD_RWLOCK_TRYWRLOCK
+REPLACE_PTHREAD_RWLOCK_TRYRDLOCK
+REPLACE_PTHREAD_RWLOCK_WRLOCK
+REPLACE_PTHREAD_RWLOCK_RDLOCK
+REPLACE_PTHREAD_RWLOCKATTR_DESTROY
+REPLACE_PTHREAD_RWLOCKATTR_INIT
+REPLACE_PTHREAD_RWLOCK_INIT
+REPLACE_PTHREAD_MUTEX_DESTROY
+REPLACE_PTHREAD_MUTEX_UNLOCK
+REPLACE_PTHREAD_MUTEX_TIMEDLOCK
+REPLACE_PTHREAD_MUTEX_TRYLOCK
+REPLACE_PTHREAD_MUTEX_LOCK
+REPLACE_PTHREAD_MUTEXATTR_DESTROY
+REPLACE_PTHREAD_MUTEXATTR_SETROBUST
+REPLACE_PTHREAD_MUTEXATTR_GETROBUST
+REPLACE_PTHREAD_MUTEXATTR_SETTYPE
+REPLACE_PTHREAD_MUTEXATTR_GETTYPE
+REPLACE_PTHREAD_MUTEXATTR_INIT
+REPLACE_PTHREAD_MUTEX_INIT
+REPLACE_PTHREAD_ONCE
+REPLACE_PTHREAD_EXIT
+REPLACE_PTHREAD_JOIN
+REPLACE_PTHREAD_DETACH
+REPLACE_PTHREAD_EQUAL
+REPLACE_PTHREAD_SELF
+REPLACE_PTHREAD_ATTR_DESTROY
+REPLACE_PTHREAD_ATTR_SETDETACHSTATE
+REPLACE_PTHREAD_ATTR_GETDETACHSTATE
+REPLACE_PTHREAD_ATTR_INIT
+REPLACE_PTHREAD_CREATE
+HAVE_PTHREAD_SPIN_DESTROY
+HAVE_PTHREAD_SPIN_UNLOCK
+HAVE_PTHREAD_SPIN_TRYLOCK
+HAVE_PTHREAD_SPIN_LOCK
+HAVE_PTHREAD_SPIN_INIT
+HAVE_PTHREAD_KEY_DELETE
+HAVE_PTHREAD_GETSPECIFIC
+HAVE_PTHREAD_SETSPECIFIC
+HAVE_PTHREAD_KEY_CREATE
+HAVE_PTHREAD_COND_DESTROY
+HAVE_PTHREAD_COND_BROADCAST
+HAVE_PTHREAD_COND_SIGNAL
+HAVE_PTHREAD_COND_TIMEDWAIT
+HAVE_PTHREAD_COND_WAIT
+HAVE_PTHREAD_CONDATTR_DESTROY
+HAVE_PTHREAD_CONDATTR_INIT
+HAVE_PTHREAD_COND_INIT
+HAVE_PTHREAD_RWLOCK_DESTROY
+HAVE_PTHREAD_RWLOCK_UNLOCK
+HAVE_PTHREAD_RWLOCK_TIMEDWRLOCK
+HAVE_PTHREAD_RWLOCK_TIMEDRDLOCK
+HAVE_PTHREAD_RWLOCK_TRYWRLOCK
+HAVE_PTHREAD_RWLOCK_TRYRDLOCK
+HAVE_PTHREAD_RWLOCK_WRLOCK
+HAVE_PTHREAD_RWLOCK_RDLOCK
+HAVE_PTHREAD_RWLOCKATTR_DESTROY
+HAVE_PTHREAD_RWLOCKATTR_INIT
+HAVE_PTHREAD_RWLOCK_INIT
+HAVE_PTHREAD_MUTEX_DESTROY
+HAVE_PTHREAD_MUTEX_UNLOCK
+HAVE_PTHREAD_MUTEX_TIMEDLOCK
+HAVE_PTHREAD_MUTEX_TRYLOCK
+HAVE_PTHREAD_MUTEX_LOCK
+HAVE_PTHREAD_MUTEXATTR_DESTROY
+HAVE_PTHREAD_MUTEXATTR_SETROBUST
+HAVE_PTHREAD_MUTEXATTR_GETROBUST
+HAVE_PTHREAD_MUTEXATTR_SETTYPE
+HAVE_PTHREAD_MUTEXATTR_GETTYPE
+HAVE_PTHREAD_MUTEXATTR_INIT
+HAVE_PTHREAD_MUTEX_INIT
+HAVE_PTHREAD_ONCE
+HAVE_PTHREAD_EXIT
+HAVE_PTHREAD_JOIN
+HAVE_PTHREAD_DETACH
+HAVE_PTHREAD_EQUAL
+HAVE_PTHREAD_SELF
+HAVE_PTHREAD_ATTR_DESTROY
+HAVE_PTHREAD_ATTR_SETDETACHSTATE
+HAVE_PTHREAD_ATTR_GETDETACHSTATE
+HAVE_PTHREAD_ATTR_INIT
+HAVE_PTHREAD_CREATE
+HAVE_PTHREAD_PROCESS_SHARED
+HAVE_PTHREAD_MUTEX_ROBUST
+HAVE_PTHREAD_MUTEX_RECURSIVE
+HAVE_PTHREAD_CREATE_DETACHED
+HAVE_PTHREAD_SPINLOCK_T
+HAVE_PTHREAD_T
+GNULIB_PTHREAD_MUTEX_TIMEDLOCK
+GNULIB_PTHREAD_SPIN
+GNULIB_PTHREAD_TSS
+GNULIB_PTHREAD_COND
+GNULIB_PTHREAD_RWLOCK
+GNULIB_PTHREAD_MUTEX
+GNULIB_PTHREAD_ONCE
+GNULIB_PTHREAD_THREAD
+PREFERABLY_POSIX_SHELL
+POSIX_SHELL
+LIB_POLL
+LIBSOCKET
+NEXT_AS_FIRST_DIRECTIVE_POLL_H
+NEXT_POLL_H
+HAVE_POLL_H
+REPLACE_POLL
+HAVE_POLL
+GNULIB_POLL
+NEXT_AS_FIRST_DIRECTIVE_PTY_H
+NEXT_PTY_H
+HAVE_PTY_H
+REPLACE_OPENPTY
+REPLACE_FORKPTY
+HAVE_OPENPTY
+HAVE_FORKPTY
+HAVE_LIBUTIL_H
+HAVE_UTIL_H
+GNULIB_OPENPTY
+GNULIB_FORKPTY
+PTY_LIB
+ASM_SYMBOL_PREFIX
+GL_GENERATE_NETINET_IN_H_FALSE
+GL_GENERATE_NETINET_IN_H_TRUE
+NETINET_IN_H
+HAVE_NETINET_IN_H
+NEXT_AS_FIRST_DIRECTIVE_NETINET_IN_H
+NEXT_NETINET_IN_H
+GL_GENERATE_NET_IF_H_FALSE
+GL_GENERATE_NET_IF_H_TRUE
+NET_IF_H
+HAVE_NET_IF_H
+NEXT_AS_FIRST_DIRECTIVE_NET_IF_H
+NEXT_NET_IF_H
+APPLE_UNIVERSAL_BUILD
+UNDEFINE_STRTOK_R
+REPLACE_STRSIGNAL
+REPLACE_STRERROR_R
+REPLACE_STRERROR
+REPLACE_STRTOK_R
+REPLACE_STRCASESTR
+REPLACE_STRSTR
+REPLACE_STRNLEN
+REPLACE_STRNDUP
+REPLACE_STRNCAT
+REPLACE_STRDUP
+REPLACE_STRCHRNUL
+REPLACE_STPNCPY
+REPLACE_MEMMEM
+REPLACE_MEMCHR
+HAVE_STRVERSCMP
+HAVE_DECL_STRSIGNAL
+HAVE_DECL_STRERROR_R
+HAVE_DECL_STRTOK_R
+HAVE_STRCASESTR
+HAVE_STRSEP
+HAVE_STRPBRK
+HAVE_DECL_STRNLEN
+HAVE_DECL_STRNDUP
+HAVE_DECL_STRDUP
+HAVE_STRCHRNUL
+HAVE_STPNCPY
+HAVE_STPCPY
+HAVE_RAWMEMCHR
+HAVE_DECL_MEMRCHR
+HAVE_MEMPCPY
+HAVE_DECL_MEMMEM
+HAVE_MEMCHR
+HAVE_FFSLL
+HAVE_FFSL
+HAVE_EXPLICIT_BZERO
+HAVE_MBSLEN
+GNULIB_STRVERSCMP
+GNULIB_STRSIGNAL
+GNULIB_STRERROR_R
+GNULIB_STRERROR
+GNULIB_MBSTOK_R
+GNULIB_MBSSEP
+GNULIB_MBSSPN
+GNULIB_MBSPBRK
+GNULIB_MBSCSPN
+GNULIB_MBSCASESTR
+GNULIB_MBSPCASECMP
+GNULIB_MBSNCASECMP
+GNULIB_MBSCASECMP
+GNULIB_MBSSTR
+GNULIB_MBSRCHR
+GNULIB_MBSCHR
+GNULIB_MBSNLEN
+GNULIB_MBSLEN
+GNULIB_STRTOK_R
+GNULIB_STRCASESTR
+GNULIB_STRSTR
+GNULIB_STRSEP
+GNULIB_STRPBRK
+GNULIB_STRNLEN
+GNULIB_STRNDUP
+GNULIB_STRNCAT
+GNULIB_STRDUP
+GNULIB_STRCHRNUL
+GNULIB_STPNCPY
+GNULIB_STPCPY
+GNULIB_RAWMEMCHR
+GNULIB_MEMRCHR
+GNULIB_MEMPCPY
+GNULIB_MEMMEM
+GNULIB_MEMCHR
+GNULIB_FFSLL
+GNULIB_FFSL
+GNULIB_EXPLICIT_BZERO
+REPLACE_WCTOMB
+REPLACE_UNSETENV
+REPLACE_STRTOLD
+REPLACE_STRTOD
+REPLACE_SETSTATE
+REPLACE_SETENV
+REPLACE_REALPATH
+REPLACE_REALLOC
+REPLACE_RANDOM_R
+REPLACE_RANDOM
+REPLACE_QSORT_R
+REPLACE_PUTENV
+REPLACE_PTSNAME_R
+REPLACE_PTSNAME
+REPLACE_MKSTEMP
+REPLACE_MBTOWC
+REPLACE_MALLOC
+REPLACE_INITSTATE
+REPLACE_CANONICALIZE_FILE_NAME
+REPLACE_CALLOC
+HAVE_DECL_UNSETENV
+HAVE_UNLOCKPT
+HAVE_SYS_LOADAVG_H
+HAVE_STRUCT_RANDOM_DATA
+HAVE_STRTOULL
+HAVE_STRTOLL
+HAVE_STRTOLD
+HAVE_STRTOD
+HAVE_DECL_SETSTATE
+HAVE_SETSTATE
+HAVE_DECL_SETENV
+HAVE_SETENV
+HAVE_SECURE_GETENV
+HAVE_RPMATCH
+HAVE_REALPATH
+HAVE_REALLOCARRAY
+HAVE_RANDOM_R
+HAVE_RANDOM_H
+HAVE_RANDOM
+HAVE_QSORT_R
+HAVE_PTSNAME_R
+HAVE_PTSNAME
+HAVE_POSIX_OPENPT
+HAVE_MKSTEMPS
+HAVE_MKSTEMP
+HAVE_MKOSTEMPS
+HAVE_MKOSTEMP
+HAVE_MKDTEMP
+HAVE_MBTOWC
+HAVE_DECL_INITSTATE
+HAVE_INITSTATE
+HAVE_GRANTPT
+HAVE_GETSUBOPT
+HAVE_DECL_GETLOADAVG
+HAVE_CANONICALIZE_FILE_NAME
+HAVE_ATOLL
+HAVE__EXIT
+GNULIB_WCTOMB
+GNULIB_UNSETENV
+GNULIB_UNLOCKPT
+GNULIB_SYSTEM_POSIX
+GNULIB_STRTOULL
+GNULIB_STRTOLL
+GNULIB_STRTOLD
+GNULIB_STRTOD
+GNULIB_SETENV
+GNULIB_SECURE_GETENV
+GNULIB_RPMATCH
+GNULIB_REALPATH
+GNULIB_REALLOC_POSIX
+GNULIB_REALLOCARRAY
+GNULIB_RANDOM_R
+GNULIB_RANDOM
+GNULIB_QSORT_R
+GNULIB_PUTENV
+GNULIB_PTSNAME_R
+GNULIB_PTSNAME
+GNULIB_POSIX_OPENPT
+GNULIB_MKSTEMPS
+GNULIB_MKSTEMP
+GNULIB_MKOSTEMPS
+GNULIB_MKOSTEMP
+GNULIB_MKDTEMP
+GNULIB_MBTOWC
+GNULIB_MALLOC_POSIX
+GNULIB_GRANTPT
+GNULIB_GETSUBOPT
+GNULIB_GETLOADAVG
+GNULIB_CANONICALIZE_FILE_NAME
+GNULIB_CALLOC_POSIX
+GNULIB_ATOLL
+GNULIB__EXIT
+NEXT_AS_FIRST_DIRECTIVE_LOCALE_H
+NEXT_LOCALE_H
+HAVE_XLOCALE_H
+NEXT_AS_FIRST_DIRECTIVE_STDDEF_H
+NEXT_STDDEF_H
+GL_GENERATE_STDDEF_H_FALSE
+GL_GENERATE_STDDEF_H_TRUE
+STDDEF_H
+HAVE_WCHAR_T
+HAVE_MAX_ALIGN_T
+REPLACE_NULL
+REPLACE_STRUCT_LCONV
+REPLACE_FREELOCALE
+REPLACE_DUPLOCALE
+REPLACE_NEWLOCALE
+REPLACE_SETLOCALE
+REPLACE_LOCALECONV
+HAVE_FREELOCALE
+HAVE_DUPLOCALE
+HAVE_NEWLOCALE
+GNULIB_LOCALENAME
+GNULIB_DUPLOCALE
+GNULIB_SETLOCALE_NULL
+GNULIB_SETLOCALE
+GNULIB_LOCALECONV
+LOCALCHARSET_TESTS_ENVIRONMENT
+GL_GENERATE_LIMITS_H_FALSE
+GL_GENERATE_LIMITS_H_TRUE
+LIMITS_H
+NEXT_AS_FIRST_DIRECTIVE_LIMITS_H
+NEXT_LIMITS_H
+LTLIBINTL
+LIBINTL
+GETHOSTNAME_LIB
+GETADDRINFO_LIB
+INET_NTOP_LIB
+SERVENT_LIB
+HOSTENT_LIB
+HAVE_NETDB_H
+NEXT_AS_FIRST_DIRECTIVE_NETDB_H
+NEXT_NETDB_H
+REPLACE_GETADDRINFO
+REPLACE_GAI_STRERROR
+HAVE_DECL_GETNAMEINFO
+HAVE_DECL_GETADDRINFO
+HAVE_DECL_GAI_STRERROR
+HAVE_DECL_FREEADDRINFO
+HAVE_STRUCT_ADDRINFO
+GNULIB_GETADDRINFO
+WINDOWS_64_BIT_ST_SIZE
+WINDOWS_STAT_TIMESPEC
+NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H
+NEXT_SYS_STAT_H
+REPLACE_UTIMENSAT
+REPLACE_STAT
+REPLACE_MKNOD
+REPLACE_MKFIFO
+REPLACE_MKDIR
+REPLACE_LSTAT
+REPLACE_FUTIMENS
+REPLACE_FSTATAT
+REPLACE_FSTAT
+HAVE_UTIMENSAT
+HAVE_MKNODAT
+HAVE_MKNOD
+HAVE_MKFIFOAT
+HAVE_MKFIFO
+HAVE_MKDIRAT
+HAVE_LSTAT
+HAVE_LCHMOD
+HAVE_FUTIMENS
+HAVE_FSTATAT
+HAVE_FCHMODAT
+GNULIB_OVERRIDES_STRUCT_STAT
+GNULIB_UTIMENSAT
+GNULIB_STAT
+GNULIB_MKNODAT
+GNULIB_MKNOD
+GNULIB_MKFIFOAT
+GNULIB_MKFIFO
+GNULIB_MKDIRAT
+GNULIB_LSTAT
+GNULIB_LCHMOD
+GNULIB_FUTIMENS
+GNULIB_FSTATAT
+GNULIB_FSTAT
+GNULIB_FCHMODAT
+WINDOWS_STAT_INODES
+WINDOWS_64_BIT_OFF_T
+NEXT_AS_FIRST_DIRECTIVE_SYS_TYPES_H
+NEXT_SYS_TYPES_H
+REPLACE_VSPRINTF
+REPLACE_VSNPRINTF
+REPLACE_VPRINTF
+REPLACE_VFPRINTF
+REPLACE_VDPRINTF
+REPLACE_VASPRINTF
+REPLACE_TMPFILE
+REPLACE_STDIO_WRITE_FUNCS
+REPLACE_STDIO_READ_FUNCS
+REPLACE_SPRINTF
+REPLACE_SNPRINTF
+REPLACE_RENAMEAT
+REPLACE_RENAME
+REPLACE_REMOVE
+REPLACE_PRINTF
+REPLACE_POPEN
+REPLACE_PERROR
+REPLACE_OBSTACK_PRINTF
+REPLACE_GETLINE
+REPLACE_GETDELIM
+REPLACE_FTELLO
+REPLACE_FTELL
+REPLACE_FSEEKO
+REPLACE_FSEEK
+REPLACE_FREOPEN
+REPLACE_FPURGE
+REPLACE_FPRINTF
+REPLACE_FOPEN
+REPLACE_FFLUSH
+REPLACE_FDOPEN
+REPLACE_FCLOSE
+REPLACE_DPRINTF
+HAVE_VDPRINTF
+HAVE_VASPRINTF
+HAVE_RENAMEAT
+HAVE_POPEN
+HAVE_PCLOSE
+HAVE_FTELLO
+HAVE_FSEEKO
+HAVE_DPRINTF
+HAVE_DECL_VSNPRINTF
+HAVE_DECL_SNPRINTF
+HAVE_DECL_OBSTACK_PRINTF
+HAVE_DECL_GETLINE
+HAVE_DECL_GETDELIM
+HAVE_DECL_FTELLO
+HAVE_DECL_FSEEKO
+HAVE_DECL_FPURGE
+GNULIB_VSPRINTF_POSIX
+GNULIB_VSNPRINTF
+GNULIB_VPRINTF_POSIX
+GNULIB_VPRINTF
+GNULIB_VFPRINTF_POSIX
+GNULIB_VFPRINTF
+GNULIB_VDPRINTF
+GNULIB_VSCANF
+GNULIB_VFSCANF
+GNULIB_VASPRINTF
+GNULIB_TMPFILE
+GNULIB_STDIO_H_SIGPIPE
+GNULIB_STDIO_H_NONBLOCKING
+GNULIB_SPRINTF_POSIX
+GNULIB_SNPRINTF
+GNULIB_SCANF
+GNULIB_RENAMEAT
+GNULIB_RENAME
+GNULIB_REMOVE
+GNULIB_PUTS
+GNULIB_PUTCHAR
+GNULIB_PUTC
+GNULIB_PRINTF_POSIX
+GNULIB_PRINTF
+GNULIB_POPEN
+GNULIB_PERROR
+GNULIB_PCLOSE
+GNULIB_OBSTACK_PRINTF_POSIX
+GNULIB_OBSTACK_PRINTF
+GNULIB_GETLINE
+GNULIB_GETDELIM
+GNULIB_GETCHAR
+GNULIB_GETC
+GNULIB_FWRITE
+GNULIB_FTELLO
+GNULIB_FTELL
+GNULIB_FSEEKO
+GNULIB_FSEEK
+GNULIB_FSCANF
+GNULIB_FREOPEN
+GNULIB_FREAD
+GNULIB_FPUTS
+GNULIB_FPUTC
+GNULIB_FPURGE
+GNULIB_FPRINTF_POSIX
+GNULIB_FPRINTF
+GNULIB_FOPEN
+GNULIB_FGETS
+GNULIB_FGETC
+GNULIB_FFLUSH
+GNULIB_FDOPEN
+GNULIB_FCLOSE
+GNULIB_DPRINTF
+REPLACE_ITOLD
+GL_GENERATE_FLOAT_H_FALSE
+GL_GENERATE_FLOAT_H_TRUE
+FLOAT_H
+NEXT_AS_FIRST_DIRECTIVE_FLOAT_H
+NEXT_FLOAT_H
+NEXT_AS_FIRST_DIRECTIVE_FCNTL_H
+NEXT_FCNTL_H
+REPLACE_OPENAT
+REPLACE_OPEN
+REPLACE_FCNTL
+REPLACE_CREAT
+HAVE_OPENAT
+HAVE_FCNTL
+GNULIB_OPENAT
+GNULIB_OPEN
+GNULIB_NONBLOCKING
+GNULIB_FCNTL
+GNULIB_CREAT
+EOVERFLOW_VALUE
+EOVERFLOW_HIDDEN
+ENOLINK_VALUE
+ENOLINK_HIDDEN
+EMULTIHOP_VALUE
+EMULTIHOP_HIDDEN
+GL_GENERATE_ERRNO_H_FALSE
+GL_GENERATE_ERRNO_H_TRUE
+ERRNO_H
+NEXT_AS_FIRST_DIRECTIVE_ERRNO_H
+NEXT_ERRNO_H
+pkglibexecdir
+runstatedir
+lispdir
+HAVE_MSVC_INVALID_PARAMETER_HANDLER
+HAVE_FEATURES_H
+NEXT_AS_FIRST_DIRECTIVE_ARPA_INET_H
+NEXT_ARPA_INET_H
+HAVE_ARPA_INET_H
+REPLACE_INET_PTON
+REPLACE_INET_NTOP
+HAVE_DECL_INET_PTON
+HAVE_DECL_INET_NTOP
+GNULIB_INET_PTON
+GNULIB_INET_NTOP
+HAVE_ALLOCA_H
+GL_GENERATE_ALLOCA_H_FALSE
+GL_GENERATE_ALLOCA_H_TRUE
+ALLOCA_H
+ALLOCA
+LTALLOCA
+HAVE_WINSOCK2_H
+REPLACE_IOCTL
+SYS_IOCTL_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS
+SYS_IOCTL_H_HAVE_WINSOCK2_H
+GNULIB_IOCTL
+UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS
+UNISTD_H_HAVE_WINSOCK2_H
+REPLACE_WRITE
+REPLACE_USLEEP
+REPLACE_UNLINKAT
+REPLACE_UNLINK
+REPLACE_TTYNAME_R
+REPLACE_TRUNCATE
+REPLACE_SYMLINKAT
+REPLACE_SYMLINK
+REPLACE_SLEEP
+REPLACE_RMDIR
+REPLACE_READLINKAT
+REPLACE_READLINK
+REPLACE_READ
+REPLACE_PWRITE
+REPLACE_PREAD
+REPLACE_LSEEK
+REPLACE_LINKAT
+REPLACE_LINK
+REPLACE_LCHOWN
+REPLACE_ISATTY
+REPLACE_GETPASS
+REPLACE_GETPAGESIZE
+REPLACE_GETGROUPS
+REPLACE_GETLOGIN_R
+REPLACE_GETDTABLESIZE
+REPLACE_GETDOMAINNAME
+REPLACE_GETCWD
+REPLACE_FTRUNCATE
+REPLACE_FCHOWNAT
+REPLACE_FACCESSAT
+REPLACE_DUP2
+REPLACE_DUP
+REPLACE_CLOSE
+REPLACE_CHOWN
+REPLACE_ACCESS
+HAVE_SYS_PARAM_H
+HAVE_OS_H
+HAVE_DECL_TTYNAME_R
+HAVE_DECL_TRUNCATE
+HAVE_DECL_SETHOSTNAME
+HAVE_DECL_GETUSERSHELL
+HAVE_DECL_GETPAGESIZE
+HAVE_DECL_GETLOGIN_R
+HAVE_DECL_GETLOGIN
+HAVE_DECL_GETDOMAINNAME
+HAVE_DECL_FDATASYNC
+HAVE_DECL_FCHDIR
+HAVE_DECL_ENVIRON
+HAVE_USLEEP
+HAVE_UNLINKAT
+HAVE_SYMLINKAT
+HAVE_SYMLINK
+HAVE_SLEEP
+HAVE_SETHOSTNAME
+HAVE_READLINKAT
+HAVE_READLINK
+HAVE_PWRITE
+HAVE_PREAD
+HAVE_PIPE2
+HAVE_PIPE
+HAVE_LINKAT
+HAVE_LINK
+HAVE_LCHOWN
+HAVE_GROUP_MEMBER
+HAVE_GETPASS
+HAVE_GETPAGESIZE
+HAVE_GETLOGIN
+HAVE_GETHOSTNAME
+HAVE_GETGROUPS
+HAVE_GETDTABLESIZE
+HAVE_FTRUNCATE
+HAVE_FSYNC
+HAVE_FDATASYNC
+HAVE_FCHOWNAT
+HAVE_FCHDIR
+HAVE_FACCESSAT
+HAVE_EUIDACCESS
+HAVE_DUP3
+HAVE_DUP2
+HAVE_COPY_FILE_RANGE
+HAVE_CHOWN
+GNULIB_WRITE
+GNULIB_USLEEP
+GNULIB_UNLINKAT
+GNULIB_UNLINK
+GNULIB_UNISTD_H_SIGPIPE
+GNULIB_UNISTD_H_NONBLOCKING
+GNULIB_TTYNAME_R
+GNULIB_TRUNCATE
+GNULIB_SYMLINKAT
+GNULIB_SYMLINK
+GNULIB_SLEEP
+GNULIB_SETHOSTNAME
+GNULIB_RMDIR
+GNULIB_READLINKAT
+GNULIB_READLINK
+GNULIB_READ
+GNULIB_PWRITE
+GNULIB_PREAD
+GNULIB_PIPE2
+GNULIB_PIPE
+GNULIB_LSEEK
+GNULIB_LINKAT
+GNULIB_LINK
+GNULIB_LCHOWN
+GNULIB_ISATTY
+GNULIB_GROUP_MEMBER
+GNULIB_GETUSERSHELL
+GNULIB_GETPASS
+GNULIB_GETPAGESIZE
+GNULIB_GETLOGIN_R
+GNULIB_GETLOGIN
+GNULIB_GETHOSTNAME
+GNULIB_GETGROUPS
+GNULIB_GETDTABLESIZE
+GNULIB_GETDOMAINNAME
+GNULIB_GETCWD
+GNULIB_FTRUNCATE
+GNULIB_FSYNC
+GNULIB_FDATASYNC
+GNULIB_FCHOWNAT
+GNULIB_FCHDIR
+GNULIB_FACCESSAT
+GNULIB_EUIDACCESS
+GNULIB_ENVIRON
+GNULIB_DUP3
+GNULIB_DUP2
+GNULIB_DUP
+GNULIB_COPY_FILE_RANGE
+GNULIB_CLOSE
+GNULIB_CHOWN
+GNULIB_CHDIR
+GNULIB_ACCESS
+HAVE_WS2TCPIP_H
+HAVE_SYS_SOCKET_H
+NEXT_AS_FIRST_DIRECTIVE_SYS_SOCKET_H
+NEXT_SYS_SOCKET_H
+PRAGMA_COLUMNS
+PRAGMA_SYSTEM_HEADER
+INCLUDE_NEXT_AS_FIRST_DIRECTIVE
+INCLUDE_NEXT
+HAVE_ACCEPT4
+HAVE_SA_FAMILY_T
+HAVE_STRUCT_SOCKADDR_STORAGE_SS_FAMILY
+HAVE_STRUCT_SOCKADDR_STORAGE
+GNULIB_ACCEPT4
+GNULIB_SHUTDOWN
+GNULIB_SETSOCKOPT
+GNULIB_SENDTO
+GNULIB_RECVFROM
+GNULIB_SEND
+GNULIB_RECV
+GNULIB_LISTEN
+GNULIB_GETSOCKOPT
+GNULIB_GETSOCKNAME
+GNULIB_GETPEERNAME
+GNULIB_BIND
+GNULIB_ACCEPT
+GNULIB_CONNECT
+GNULIB_SOCKET
+GL_COND_LIBTOOL_FALSE
+GL_COND_LIBTOOL_TRUE
+RANLIB
+ARFLAGS
+AR
+EGREP
+GREP
+CPP
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+LIBVIRT_VERSION_NUMBER
+LIBVIRT_VERSION_INFO
+LIBVIRT_VERSION
+LIBVIRT_SONUM
+LIBVIRT_MICRO_VERSION
+LIBVIRT_MINOR_VERSION
+LIBVIRT_MAJOR_VERSION
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL
+am__quote'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_silent_rules
+with_packager
+with_packager_version
+enable_dependency_tracking
+with_runstatedir
+with_system
+enable_largefile
+enable_threads
+enable_cross_guesses
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_aix_soname
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+enable_werror
+with_apparmor
+with_apparmor_mount
+with_attr
+with_audit
+with_bash_completion
+with_bash_completions_dir
+with_blkid
+with_capng
+with_curl
+with_dbus
+with_firewalld
+with_firewalld_zone
+with_fuse
+with_glusterfs
+with_hal
+with_libiscsi
+with_libpcap
+with_libssh
+with_libxml
+with_macvtap
+with_netcf
+enable_nls
+with_nss_plugin
+with_numactl
+with_openwsman
+with_pciaccess
+with_pm_utils
+with_polkit
+with_readline
+with_sanlock
+with_sasl
+with_selinux
+with_selinux_mount
+with_ssh2
+with_udev
+with_virtualport
+with_wireshark_dissector
+with_ws_plugindir
+with_yajl
+with_qemu
+with_qemu_user
+with_qemu_group
+with_openvz
+with_vmware
+with_libxl
+with_vbox
+with_lxc
+with_vz
+with_bhyve
+with_esx
+with_hyperv
+with_test
+with_remote
+with_remote_default_mode
+with_libvirtd
+with_network
+with_interface
+enable_debug
+with_dtrace
+with_numad
+with_init_script
+with_chrdev_lock_files
+with_default_editor
+with_loader_nvram
+with_login_shell
+with_host_validate
+with_tls_priority
+with_sysctl
+with_secdriver_selinux
+with_secdriver_apparmor
+with_apparmor_profiles
+with_secrets
+with_storage_dir
+with_storage_fs
+with_storage_lvm
+with_storage_iscsi
+with_storage_iscsi_direct
+with_storage_scsi
+with_storage_mpath
+with_storage_disk
+with_storage_rbd
+with_storage_sheepdog
+with_storage_gluster
+with_storage_zfs
+with_storage_vstorage
+with_test_suite
+enable_expensive_tests
+enable_test_coverage
+with_driver_modules
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP
+LT_SYS_LIBRARY_PATH
+PKG_CONFIG
+PKG_CONFIG_PATH
+PKG_CONFIG_LIBDIR
+READLINE_CFLAGS
+READLINE_LIBS
+BASH_COMPLETION_CFLAGS
+BASH_COMPLETION_LIBS
+BLKID_CFLAGS
+BLKID_LIBS
+CURL_CFLAGS
+CURL_LIBS
+DBUS_CFLAGS
+DBUS_LIBS
+DEVMAPPER_CFLAGS
+DEVMAPPER_LIBS
+FUSE_CFLAGS
+FUSE_LIBS
+GLIB_CFLAGS
+GLIB_LIBS
+GLUSTERFS_CFLAGS
+GLUSTERFS_LIBS
+GNUTLS_CFLAGS
+GNUTLS_LIBS
+HAL_CFLAGS
+HAL_LIBS
+LIBISCSI_CFLAGS
+LIBISCSI_LIBS
+LIBNL_CFLAGS
+LIBNL_LIBS
+LIBNL_ROUTE_CFLAGS
+LIBNL_ROUTE_LIBS
+LIBPARTED_CFLAGS
+LIBPARTED_LIBS
+LIBSSH_CFLAGS
+LIBSSH_LIBS
+LIBXML_CFLAGS
+LIBXML_LIBS
+NETCF_CFLAGS
+NETCF_LIBS
+OPENWSMAN_CFLAGS
+OPENWSMAN_LIBS
+PCIACCESS_CFLAGS
+PCIACCESS_LIBS
+SASL_CFLAGS
+SASL_LIBS
+SSH2_CFLAGS
+SSH2_LIBS
+UDEV_CFLAGS
+UDEV_LIBS
+WIRESHARK_DISSECTOR_CFLAGS
+WIRESHARK_DISSECTOR_LIBS
+YAJL_CFLAGS
+YAJL_LIBS
+LIBXL_CFLAGS
+LIBXL_LIBS
+PARALLELS_SDK_CFLAGS
+PARALLELS_SDK_LIBS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures libvirt 6.0.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/libvirt]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of libvirt 6.0.0:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-silent-rules   less verbose build output (undo: "make V=1")
+  --disable-silent-rules  verbose build output (undo: "make V=0")
+  --enable-dependency-tracking
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
+  --disable-largefile     omit support for large files
+  --enable-threads={isoc|posix|isoc+posix|windows}
+                          specify multithreading API
+  --disable-threads       build without multithread safety
+  --enable-cross-guesses={conservative|risky}
+                          specify policy for cross-compilation guesses
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=no]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+  --enable-werror         Use -Werror (if supported) [default=check]
+  --enable-nls            NLS [default=check]
+  --enable-debug          enable debugging output [default=yes]
+  --enable-expensive-tests
+                          set the default for enabling expensive tests (gnulib
+                          and long timeouts), use VIR_TEST_EXPENSIVE to
+                          override during make [default=check]
+  --enable-test-coverage  turn on code coverage instrumentation [default=no]
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-packager         Extra packager name [default=no]
+  --with-packager-version Extra packager version [default=no]
+  --with-runstatedir      State directory for temporary sockets, pid files,
+                          etc
+  --with-system           configure libvirt to be compatible with normal OS
+                          vendor prefixes [default=no]
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-aix-soname=aix|svr4|both
+                          shared library versioning (aka "SONAME") variant to
+                          provide on AIX, [default=aix].
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot[=DIR]    Search for dependent libraries within DIR (or the
+                          compiler's sysroot if not specified).
+  --with-apparmor         with AppArmor support [default=check]
+  --with-apparmor-mount   set AppArmor mount point [default=check]
+  --with-attr             with attr support [default=check]
+  --with-audit            with audit support [default=check]
+  --with-bash-completion  with bash-completion (>= 2.0) support
+                          [default=check]
+  --with-bash-completions-dir
+                          directory containing bash completions scripts
+                          [default=check]
+  --with-blkid            with blkid (>= 2.17) support [default=check]
+  --with-capng            with cap-ng support [default=check]
+  --with-curl             with libcurl (>= 7.18.0) support [default=check]
+  --with-dbus             with dbus-1 (>= 1.0.0) support [default=check]
+  --with-firewalld        with firewalld support [default=check]
+  --with-firewalld-zone   Whether to install firewalld libvirt zone
+                          [default=check]
+  --with-fuse             with fuse (>= 2.8.6) support [default=check]
+  --with-glusterfs        with glusterfs (>= 3.4.1) support [default=check]
+  --with-hal              with hal (>= 0.5.0) support [default=check]
+  --with-libiscsi         with libiscsi (>= 1.18.0) support [default=check]
+  --with-libpcap          libpcap location [default=check]
+  --with-libssh           with libssh (>= 0.7) support [default=check]
+  --with-libxml           libxml-2.0 location [default=check]
+  --with-macvtap          enable macvtap device [default=check]
+  --with-netcf            with netcf (>= 0.1.8) support [default=check]
+  --with-nss-plugin       enable Name Service Switch plugin for resolving
+                          guest IP addresses [default=check]
+  --with-numactl          with numa support [default=check]
+  --with-openwsman        with openwsman (>= 2.2.3) support [default=check]
+  --with-pciaccess        with pciaccess (>= 0.10.0) support [default=check]
+  --with-pm-utils         use pm-utils for power management [default=check]
+  --with-polkit           use PolicyKit for UNIX socket access checks
+                          [default=check]
+  --with-readline         with readline support [default=check]
+  --with-sanlock          with sanlock-client support [default=check]
+  --with-sasl             with sasl support [default=check]
+  --with-selinux          with SELinux support [default=check]
+  --with-selinux-mount    set SELinux mount point [default=check]
+  --with-ssh2             with libssh2 (>= 1.3) support [default=check]
+  --with-udev             with libudev (>= 219) support [default=check]
+  --with-virtualport      enable virtual port support [default=check]
+  --with-wireshark-dissector
+                          with wireshark (>= 2.4.0) support [default=check]
+  --with-ws-plugindir     wireshark plugins directory for use when installing
+                          wireshark plugin [default=check]
+  --with-yajl             with yajl support [default=check]
+  --with-qemu             with QEMU/KVM support [default=check]
+  --with-qemu-user        username to run QEMU system instance as
+                          [default='platform dependent']
+  --with-qemu-group       groupname to run QEMU system instance as
+                          [default='platform dependent']
+  --with-openvz           with OpenVZ support [default=check]
+  --with-vmware           with VMware support [default=yes]
+  --with-libxl            with libxenlight support [default=check]
+  --with-vbox             with VirtualBox XPCOMC support [default=yes]
+  --with-lxc              with Linux Container support [default=check]
+  --with-vz               with Virtuozzo support [default=check]
+  --with-bhyve            with BHyVe support [default=check]
+  --with-esx              with ESX support [default=check]
+  --with-hyperv           with Hyper-V support [default=check]
+  --with-test             with test driver support [default=yes]
+  --with-remote           with remote driver support [default=yes]
+  --with-remote-default-mode
+                          remote driver default mode [default=legacy]
+  --with-libvirtd         with libvirtd support [default=yes]
+  --with-network          with virtual network driver [default=yes]
+  --with-interface        with host interface driver support [default=check]
+  --with-dtrace           use dtrace for static probing [default=check]
+  --with-numad            use numad to manage CPU placement dynamically
+                          [default=check]
+  --with-init-script      Style of init script to install: systemd, openrc,
+                          check, none [default=check]
+  --with-chrdev-lock-files
+                          location for UUCP style lock files for character
+                          devices (use auto for default paths on some
+                          platforms) [default=auto]
+  --with-default-editor   Editor to use for interactive commands [default=vi]
+  --with-loader-nvram     Pass list of pairs of <loader>:<nvram> paths. Both
+                          pairs and list items are separated by a colon.
+                          [default='']
+  --with-login-shell      build virt-login-shell [default=check]
+  --with-host-validate    build virt-host-validate [default=check]
+  --with-tls-priority     set the default TLS session priority string
+                          [default=NORMAL]
+  --with-sysctl           Whether to install sysctl configs [default=check]
+  --with-secdriver-selinux
+                          use SELinux security driver [default=check]
+  --with-secdriver-apparmor
+                          use AppArmor security driver [default=check]
+  --with-apparmor-profiles
+                          install apparmor profiles [default=no]
+  --with-secrets          with local secrets management driver support
+                          [default=yes]
+  --with-storage-dir      with directory backend for the storage driver
+                          support [default=yes]
+  --with-storage-fs       with FileSystem backend for the storage driver
+                          support [default=check]
+  --with-storage-lvm      with LVM backend for storage driver support
+                          [default=check]
+  --with-storage-iscsi    with iSCSI backend for the storage driver support
+                          [default=check]
+  --with-storage-iscsi-direct
+                          with iscsi-direct backend for the storage driver
+                          support [default=check]
+  --with-storage-scsi     with SCSI backend for the storage driver support
+                          [default=check]
+  --with-storage-mpath    with mpath backend for the storage driver support
+                          [default=check]
+  --with-storage-disk     with GPartd Disk backend for the storage driver
+                          support [default=check]
+  --with-storage-rbd      with RADOS Block Device backend for the storage
+                          driver support [default=check]
+  --with-storage-sheepdog with with Sheepdog backend for the storage driver
+                          support [default=check]
+  --with-storage-gluster  with Gluster backend for the storage driver support
+                          [default=check]
+  --with-storage-zfs      with ZFS backend for the storage driver support
+                          [default=check]
+  --with-storage-vstorage with Virtuozzo Storage backend for the storage
+                          driver support [default=check]
+  --with-test-suite       build test suite by default [default=check]
+  --with-driver-modules   build drivers as loadable modules [default=yes]
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+  LT_SYS_LIBRARY_PATH
+              User-defined run-time library search path.
+  PKG_CONFIG  path to pkg-config utility
+  PKG_CONFIG_PATH
+              directories to add to pkg-config's search path
+  PKG_CONFIG_LIBDIR
+              path overriding pkg-config's built-in search path
+  READLINE_CFLAGS
+              C compiler flags for READLINE, overriding pkg-config
+  READLINE_LIBS
+              linker flags for READLINE, overriding pkg-config
+  BASH_COMPLETION_CFLAGS
+              C compiler flags for BASH_COMPLETION, overriding pkg-config
+  BASH_COMPLETION_LIBS
+              linker flags for BASH_COMPLETION, overriding pkg-config
+  BLKID_CFLAGS
+              C compiler flags for BLKID, overriding pkg-config
+  BLKID_LIBS  linker flags for BLKID, overriding pkg-config
+  CURL_CFLAGS C compiler flags for CURL, overriding pkg-config
+  CURL_LIBS   linker flags for CURL, overriding pkg-config
+  DBUS_CFLAGS C compiler flags for DBUS, overriding pkg-config
+  DBUS_LIBS   linker flags for DBUS, overriding pkg-config
+  DEVMAPPER_CFLAGS
+              C compiler flags for DEVMAPPER, overriding pkg-config
+  DEVMAPPER_LIBS
+              linker flags for DEVMAPPER, overriding pkg-config
+  FUSE_CFLAGS C compiler flags for FUSE, overriding pkg-config
+  FUSE_LIBS   linker flags for FUSE, overriding pkg-config
+  GLIB_CFLAGS C compiler flags for GLIB, overriding pkg-config
+  GLIB_LIBS   linker flags for GLIB, overriding pkg-config
+  GLUSTERFS_CFLAGS
+              C compiler flags for GLUSTERFS, overriding pkg-config
+  GLUSTERFS_LIBS
+              linker flags for GLUSTERFS, overriding pkg-config
+  GNUTLS_CFLAGS
+              C compiler flags for GNUTLS, overriding pkg-config
+  GNUTLS_LIBS linker flags for GNUTLS, overriding pkg-config
+  HAL_CFLAGS  C compiler flags for HAL, overriding pkg-config
+  HAL_LIBS    linker flags for HAL, overriding pkg-config
+  LIBISCSI_CFLAGS
+              C compiler flags for LIBISCSI, overriding pkg-config
+  LIBISCSI_LIBS
+              linker flags for LIBISCSI, overriding pkg-config
+  LIBNL_CFLAGS
+              C compiler flags for LIBNL, overriding pkg-config
+  LIBNL_LIBS  linker flags for LIBNL, overriding pkg-config
+  LIBNL_ROUTE_CFLAGS
+              C compiler flags for LIBNL_ROUTE, overriding pkg-config
+  LIBNL_ROUTE_LIBS
+              linker flags for LIBNL_ROUTE, overriding pkg-config
+  LIBPARTED_CFLAGS
+              C compiler flags for LIBPARTED, overriding pkg-config
+  LIBPARTED_LIBS
+              linker flags for LIBPARTED, overriding pkg-config
+  LIBSSH_CFLAGS
+              C compiler flags for LIBSSH, overriding pkg-config
+  LIBSSH_LIBS linker flags for LIBSSH, overriding pkg-config
+  LIBXML_CFLAGS
+              C compiler flags for LIBXML, overriding pkg-config
+  LIBXML_LIBS linker flags for LIBXML, overriding pkg-config
+  NETCF_CFLAGS
+              C compiler flags for NETCF, overriding pkg-config
+  NETCF_LIBS  linker flags for NETCF, overriding pkg-config
+  OPENWSMAN_CFLAGS
+              C compiler flags for OPENWSMAN, overriding pkg-config
+  OPENWSMAN_LIBS
+              linker flags for OPENWSMAN, overriding pkg-config
+  PCIACCESS_CFLAGS
+              C compiler flags for PCIACCESS, overriding pkg-config
+  PCIACCESS_LIBS
+              linker flags for PCIACCESS, overriding pkg-config
+  SASL_CFLAGS C compiler flags for SASL, overriding pkg-config
+  SASL_LIBS   linker flags for SASL, overriding pkg-config
+  SSH2_CFLAGS C compiler flags for SSH2, overriding pkg-config
+  SSH2_LIBS   linker flags for SSH2, overriding pkg-config
+  UDEV_CFLAGS C compiler flags for UDEV, overriding pkg-config
+  UDEV_LIBS   linker flags for UDEV, overriding pkg-config
+  WIRESHARK_DISSECTOR_CFLAGS
+              C compiler flags for WIRESHARK_DISSECTOR, overriding pkg-config
+  WIRESHARK_DISSECTOR_LIBS
+              linker flags for WIRESHARK_DISSECTOR, overriding pkg-config
+  YAJL_CFLAGS C compiler flags for YAJL, overriding pkg-config
+  YAJL_LIBS   linker flags for YAJL, overriding pkg-config
+  LIBXL_CFLAGS
+              C compiler flags for LIBXL, overriding pkg-config
+  LIBXL_LIBS  linker flags for LIBXL, overriding pkg-config
+  PARALLELS_SDK_CFLAGS
+              C compiler flags for PARALLELS_SDK, overriding pkg-config
+  PARALLELS_SDK_LIBS
+              linker flags for PARALLELS_SDK, overriding pkg-config
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <libvir-list@redhat.com>.
+libvirt home page: <https://libvirt.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+libvirt configure 6.0.0
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if eval \${$3+:} false; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
+else
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( $as_echo "## ------------------------------------- ##
+## Report this to libvir-list@redhat.com ##
+## ------------------------------------- ##"
+     ) | sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
+
+# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES
+# ----------------------------------------------------
+# Tries to find if the field MEMBER exists in type AGGR, after including
+# INCLUDES, setting cache variable VAR accordingly.
+ac_fn_c_check_member ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
+$as_echo_n "checking for $2.$3... " >&6; }
+if eval \${$4+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (ac_aggr.$3)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$4=yes"
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (sizeof ac_aggr.$3)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$4=yes"
+else
+  eval "$4=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$4
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_member
+
+# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
+# --------------------------------------------
+# Tries to find the compile-time value of EXPR in a program that includes
+# INCLUDES, setting VAR accordingly. Returns whether the value could be
+# computed
+ac_fn_c_compute_int ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if test "$cross_compiling" = yes; then
+    # Depending upon the size, compute the lo and hi bounds.
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= 0)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_lo=0 ac_mid=0
+  while :; do
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=$ac_mid; break
+else
+  as_fn_arith $ac_mid + 1 && ac_lo=$as_val
+			if test $ac_lo -le $ac_mid; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) < 0)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=-1 ac_mid=-1
+  while :; do
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_lo=$ac_mid; break
+else
+  as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
+			if test $ac_mid -le $ac_hi; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  ac_lo= ac_hi=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+  as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=$ac_mid
+else
+  as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in #((
+?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
+'') ac_retval=1 ;;
+esac
+  else
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+static long int longval () { return $2; }
+static unsigned long int ulongval () { return $2; }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+  FILE *f = fopen ("conftest.val", "w");
+  if (! f)
+    return 1;
+  if (($2) < 0)
+    {
+      long int i = longval ();
+      if (i != ($2))
+	return 1;
+      fprintf (f, "%ld", i);
+    }
+  else
+    {
+      unsigned long int i = ulongval ();
+      if (i != ($2))
+	return 1;
+      fprintf (f, "%lu", i);
+    }
+  /* Do not output a trailing newline, as this causes \r\n confusion
+     on some platforms.  */
+  return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  echo >>conftest.val; read $3 <conftest.val; ac_retval=0
+else
+  ac_retval=1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+rm -f conftest.val
+
+  fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_compute_int
+
+# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
+# ---------------------------------------------
+# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
+# accordingly.
+ac_fn_c_check_decl ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  as_decl_name=`echo $2|sed 's/ *(.*//'`
+  as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
+$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+#ifndef $as_decl_name
+#ifdef __cplusplus
+  (void) $as_decl_use;
+#else
+  (void) $as_decl_name;
+#endif
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_decl
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by libvirt $as_me 6.0.0, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+as_fn_append ac_header_list " sys/socket.h"
+as_fn_append ac_header_list " arpa/inet.h"
+as_fn_append ac_header_list " features.h"
+as_fn_append ac_func_list " chown"
+as_fn_append ac_func_list " fchown"
+as_fn_append ac_func_list " _set_invalid_parameter_handler"
+as_fn_append ac_header_list " unistd.h"
+as_fn_append ac_func_list " fcntl"
+as_fn_append ac_func_list " symlink"
+as_fn_append ac_header_list " sys/stat.h"
+as_fn_append ac_header_list " netdb.h"
+as_fn_append ac_header_list " netinet/in.h"
+as_fn_append ac_func_list " getdelim"
+as_fn_append ac_func_list " getdtablesize"
+as_fn_append ac_header_list " sys/param.h"
+as_fn_append ac_func_list " getpass"
+as_fn_append ac_header_list " stdio_ext.h"
+as_fn_append ac_header_list " termios.h"
+as_fn_append ac_func_list " __fsetlocking"
+as_fn_append ac_header_list " grp.h"
+as_fn_append ac_header_list " limits.h"
+as_fn_append ac_header_list " xlocale.h"
+as_fn_append ac_header_list " sys/mman.h"
+as_fn_append ac_func_list " mprotect"
+as_fn_append ac_func_list " getgrouplist"
+as_fn_append ac_func_list " lstat"
+as_fn_append ac_header_list " pty.h"
+as_fn_append ac_func_list " recvmsg"
+as_fn_append ac_func_list " sendmsg"
+as_fn_append ac_func_list " pipe"
+as_fn_append ac_func_list " pipe2"
+as_fn_append ac_header_list " poll.h"
+as_fn_append ac_header_list " sys/ioctl.h"
+as_fn_append ac_header_list " sys/filio.h"
+as_fn_append ac_func_list " posix_openpt"
+as_fn_append ac_header_list " pthread.h"
+as_fn_append ac_header_list " threads.h"
+as_fn_append ac_func_list " pthread_sigmask"
+as_fn_append ac_header_list " sys/cdefs.h"
+as_fn_append ac_header_list " sys/select.h"
+as_fn_append ac_func_list " sigaction"
+as_fn_append ac_func_list " sigaltstack"
+as_fn_append ac_func_list " siginterrupt"
+as_fn_append ac_func_list " snprintf"
+as_fn_append ac_header_list " sys/time.h"
+as_fn_append ac_header_list " wchar.h"
+as_fn_append ac_header_list " stdint.h"
+as_fn_append ac_func_list " strdup"
+as_fn_append ac_header_list " sys/uio.h"
+as_fn_append ac_header_list " sys/utsname.h"
+as_fn_append ac_header_list " sys/wait.h"
+as_fn_append ac_func_list " localtime_r"
+as_fn_append ac_func_list " vasnprintf"
+as_fn_append ac_header_list " crtdefs.h"
+as_fn_append ac_func_list " iswcntrl"
+as_fn_append ac_header_list " wctype.h"
+as_fn_append ac_func_list " wcwidth"
+as_fn_append ac_header_list " sys/types.h"
+as_fn_append ac_func_list " cfmakeraw"
+as_fn_append ac_func_list " fallocate"
+as_fn_append ac_func_list " getegid"
+as_fn_append ac_func_list " geteuid"
+as_fn_append ac_func_list " getgid"
+as_fn_append ac_func_list " getifaddrs"
+as_fn_append ac_func_list " getmntent_r"
+as_fn_append ac_func_list " getpwuid_r"
+as_fn_append ac_func_list " getrlimit"
+as_fn_append ac_func_list " getuid"
+as_fn_append ac_func_list " getutxid"
+as_fn_append ac_func_list " if_indextoname"
+as_fn_append ac_func_list " mmap"
+as_fn_append ac_func_list " newlocale"
+as_fn_append ac_func_list " posix_fallocate"
+as_fn_append ac_func_list " posix_memalign"
+as_fn_append ac_func_list " prlimit"
+as_fn_append ac_func_list " sched_getaffinity"
+as_fn_append ac_func_list " sched_setscheduler"
+as_fn_append ac_func_list " setgroups"
+as_fn_append ac_func_list " setns"
+as_fn_append ac_func_list " setrlimit"
+as_fn_append ac_func_list " sysctlbyname"
+as_fn_append ac_func_list " unshare"
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+if test $srcdir = "."
+then
+  as_fn_error $? "Build directory must be different from source directory" "$LINENO" 5
+fi
+
+
+ac_aux_dir=
+for ac_dir in build-aux "$srcdir"/build-aux; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in build-aux \"$srcdir\"/build-aux" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+
+am__api_version='1.16'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='libvirt'
+ VERSION='6.0.0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar  pax cpio none'
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a pax tar archive" >&5
+$as_echo_n "checking how to create a pax tar archive... " >&6; }
+
+  # Go ahead even if we have the value already cached.  We do so because we
+  # need to set the values for the 'am__tar' and 'am__untar' variables.
+  _am_tools=${am_cv_prog_tar_pax-$_am_tools}
+
+  for _am_tool in $_am_tools; do
+    case $_am_tool in
+    gnutar)
+      for _am_tar in tar gnutar gtar; do
+        { echo "$as_me:$LINENO: $_am_tar --version" >&5
+   ($_am_tar --version) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } && break
+      done
+      am__tar="$_am_tar --format=posix -chf - "'"$$tardir"'
+      am__tar_="$_am_tar --format=posix -chf - "'"$tardir"'
+      am__untar="$_am_tar -xf -"
+      ;;
+    plaintar)
+      # Must skip GNU tar: if it does not support --format= it doesn't create
+      # ustar tarball either.
+      (tar --version) >/dev/null 2>&1 && continue
+      am__tar='tar chf - "$$tardir"'
+      am__tar_='tar chf - "$tardir"'
+      am__untar='tar xf -'
+      ;;
+    pax)
+      am__tar='pax -L -x pax -w "$$tardir"'
+      am__tar_='pax -L -x pax -w "$tardir"'
+      am__untar='pax -r'
+      ;;
+    cpio)
+      am__tar='find "$$tardir" -print | cpio -o -H pax -L'
+      am__tar_='find "$tardir" -print | cpio -o -H pax -L'
+      am__untar='cpio -i -H pax -d'
+      ;;
+    none)
+      am__tar=false
+      am__tar_=false
+      am__untar=false
+      ;;
+    esac
+
+    # If the value was cached, stop now.  We just wanted to have am__tar
+    # and am__untar set.
+    test -n "${am_cv_prog_tar_pax}" && break
+
+    # tar/untar a dummy directory, and stop if the command works.
+    rm -rf conftest.dir
+    mkdir conftest.dir
+    echo GrepMe > conftest.dir/file
+    { echo "$as_me:$LINENO: tardir=conftest.dir && eval $am__tar_ >conftest.tar" >&5
+   (tardir=conftest.dir && eval $am__tar_ >conftest.tar) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }
+    rm -rf conftest.dir
+    if test -s conftest.tar; then
+      { echo "$as_me:$LINENO: $am__untar <conftest.tar" >&5
+   ($am__untar <conftest.tar) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }
+      { echo "$as_me:$LINENO: cat conftest.dir/file" >&5
+   (cat conftest.dir/file) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }
+      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+    fi
+  done
+  rm -rf conftest.dir
+
+  if ${am_cv_prog_tar_pax+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  am_cv_prog_tar_pax=$_am_tool
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_pax" >&5
+$as_echo "$am_cv_prog_tar_pax" >&6; }
+
+
+
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <https://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
+
+
+
+# Maintainer note - comment this line out if you plan to rerun
+# GNULIB_POSIXCHECK testing to see if libvirt should be using more modules.
+# Leave it uncommented for normal releases, for faster ./configure.
+
+
+
+
+# Default to using the silent-rules feature when possible.  Formatting
+# chosen to bypass 'grep' checks that cause older automake to warn.
+# Users (include rpm) can still change the default at configure time.
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=0;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+
+# First extract pieces from the version number string
+LIBVIRT_MAJOR_VERSION=`echo $VERSION | awk -F. '{print $1}'`
+LIBVIRT_MINOR_VERSION=`echo $VERSION | awk -F. '{print $2}'`
+LIBVIRT_MICRO_VERSION=`echo $VERSION | awk -F. '{print $3}'`
+LIBVIRT_VERSION=$LIBVIRT_MAJOR_VERSION.$LIBVIRT_MINOR_VERSION.$LIBVIRT_MICRO_VERSION$LIBVIRT_MICRO_VERSION_SUFFIX
+LIBVIRT_VERSION_NUMBER=`expr $LIBVIRT_MAJOR_VERSION \* 1000000 + $LIBVIRT_MINOR_VERSION \* 1000 + $LIBVIRT_MICRO_VERSION`
+
+# In libtool terminology we need to figure out:
+#
+# CURRENT
+#     The most recent interface number that this library implements.
+#
+# REVISION
+#     The implementation number of the CURRENT interface.
+#
+# AGE
+#     The difference between the newest and oldest interfaces that this
+#     library implements.
+#
+# In other words, the library implements all the interface numbers
+# in the range from number `CURRENT - AGE' to `CURRENT'.
+#
+# Libtool assigns the soname version from `CURRENT - AGE', and we
+# don't want that to ever change in libvirt. ie it must always be
+# zero, to produce libvirt.so.0.
+#
+# We would, however, like the libvirt version number reflected
+# in the so version'd symlinks, and this is based on AGE.REVISION
+# eg  libvirt.so.0.AGE.REVISION
+#
+# Assuming we do ever want to break soname version, this can
+# toggled. But seriously, don't ever touch this.
+LIBVIRT_SONUM=0
+
+# The following examples show what libtool will do
+#
+# Input: 0.9.14 ->   libvirt.so.0.9.14
+# Input: 1.0.0  ->   libvirt.so.0.1000.0
+# Input: 2.5.8  ->   libvirt.so.0.2005.8
+#
+AGE=`expr $LIBVIRT_MAJOR_VERSION '*' 1000 + $LIBVIRT_MINOR_VERSION`
+REVISION=$LIBVIRT_MICRO_VERSION
+CURRENT=`expr $LIBVIRT_SONUM + $AGE`
+LIBVIRT_VERSION_INFO=$CURRENT:$REVISION:$AGE
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-packager was given.
+if test "${with_packager+set}" = set; then :
+  withval=$with_packager;
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-packager_version was given.
+if test "${with_packager_version+set}" = set; then :
+  withval=$with_packager_version;
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+if test "x$with_packager" != "xno"
+then
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGER "$with_packager"
+_ACEOF
+
+fi
+if test "x$with_packager_version" != "xno"
+then
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGER_VERSION "$with_packager_version"
+_ACEOF
+
+fi
+
+LIBVIRT_SBIN_PATH="$PATH:/sbin:/usr/sbin:/usr/local/sbin"
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5
+$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; }
+cat > confinc.mk << 'END'
+am__doit:
+	@echo this is the am__doit target >confinc.out
+.PHONY: am__doit
+END
+am__include="#"
+am__quote=
+# BSD make does it like this.
+echo '.include "confinc.mk" # ignored' > confmf.BSD
+# Other make implementations (GNU, Solaris 10, AIX) do it like this.
+echo 'include confinc.mk # ignored' > confmf.GNU
+_am_result=no
+for s in GNU BSD; do
+  { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5
+   (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }
+  case $?:`cat confinc.out 2>/dev/null` in #(
+  '0:this is the am__doit target') :
+    case $s in #(
+  BSD) :
+    am__include='.include' am__quote='"' ;; #(
+  *) :
+    am__include='include' am__quote='' ;;
+esac ;; #(
+  *) :
+     ;;
+esac
+  if test "$am__include" != "#"; then
+    _am_result="yes ($s style)"
+    break
+  fi
+done
+rm -f confinc.* confmf.*
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5
+$as_echo "${_am_result}" >&6; }
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+# Check whether --with-runstatedir was given.
+if test "${with_runstatedir+set}" = set; then :
+  withval=$with_runstatedir;
+fi
+
+
+if test -n "$with_runstatedir"
+then
+  runstatedir=$with_runstatedir
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-system was given.
+if test "${with_system+set}" = set; then :
+  withval=$with_system;
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+if test "x$with_system" != "xno"; then
+    prefix=/usr
+    sysconfdir=/etc
+    localstatedir=/var
+    if test -d $prefix/lib64; then
+        libdir=$prefix/lib64
+    else
+        libdir=$prefix/lib
+    fi
+fi
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+  ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
+if test "x$ac_cv_header_minix_config_h" = xyes; then :
+  MINIX=yes
+else
+  MINIX=
+fi
+
+
+  if test "$MINIX" = yes; then
+
+$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
+
+
+$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
+
+
+$as_echo "#define _MINIX 1" >>confdefs.h
+
+
+$as_echo "#define _NETBSD_SOURCE 1" >>confdefs.h
+
+  fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
+$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
+if ${ac_cv_safe_to_define___extensions__+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#         define __EXTENSIONS__ 1
+          $ac_includes_default
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_safe_to_define___extensions__=yes
+else
+  ac_cv_safe_to_define___extensions__=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
+$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
+  test $ac_cv_safe_to_define___extensions__ = yes &&
+    $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
+
+  $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _DARWIN_C_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _NETBSD_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _OPENBSD_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
+
+  $as_echo "#define __STDC_WANT_IEC_60559_ATTRIBS_EXT__ 1" >>confdefs.h
+
+  $as_echo "#define __STDC_WANT_IEC_60559_BFP_EXT__ 1" >>confdefs.h
+
+  $as_echo "#define __STDC_WANT_IEC_60559_DFP_EXT__ 1" >>confdefs.h
+
+  $as_echo "#define __STDC_WANT_IEC_60559_FUNCS_EXT__ 1" >>confdefs.h
+
+  $as_echo "#define __STDC_WANT_IEC_60559_TYPES_EXT__ 1" >>confdefs.h
+
+  $as_echo "#define __STDC_WANT_LIB_EXT2__ 1" >>confdefs.h
+
+  $as_echo "#define __STDC_WANT_MATH_SPEC_FUNCS__ 1" >>confdefs.h
+
+  $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether _XOPEN_SOURCE should be defined" >&5
+$as_echo_n "checking whether _XOPEN_SOURCE should be defined... " >&6; }
+if ${ac_cv_should_define__xopen_source+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_should_define__xopen_source=no
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+          #include <wchar.h>
+          mbstate_t x;
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+             #define _XOPEN_SOURCE 500
+             #include <wchar.h>
+             mbstate_t x;
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_should_define__xopen_source=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_should_define__xopen_source" >&5
+$as_echo "$ac_cv_should_define__xopen_source" >&6; }
+  test $ac_cv_should_define__xopen_source = yes &&
+    $as_echo "#define _XOPEN_SOURCE 500" >>confdefs.h
+
+  $as_echo "#define _HPUX_ALT_XOPEN_SOCKET_API 1" >>confdefs.h
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Minix Amsterdam compiler" >&5
+$as_echo_n "checking for Minix Amsterdam compiler... " >&6; }
+if ${gl_cv_c_amsterdam_compiler+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef __ACK__
+Amsterdam
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "Amsterdam" >/dev/null 2>&1; then :
+  gl_cv_c_amsterdam_compiler=yes
+else
+  gl_cv_c_amsterdam_compiler=no
+fi
+rm -f conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_c_amsterdam_compiler" >&5
+$as_echo "$gl_cv_c_amsterdam_compiler" >&6; }
+
+      if test $gl_cv_c_amsterdam_compiler = yes; then
+    if test -z "$AR"; then
+      AR='cc -c.a'
+    fi
+    if test -z "$ARFLAGS"; then
+      ARFLAGS='-o'
+    fi
+  else
+                                                :
+  fi
+
+        if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPAR