docs/schemas/storagepool.rng | 5 ++++- src/storage/storage_backend_rbd.c | 13 ++++++++++--- tests/storagepoolxml2xmlin/pool-rbd-ipv6.xml | 13 +++++++++++++ tests/storagepoolxml2xmlout/pool-rbd-ipv6.xml | 16 ++++++++++++++++ tests/storagepoolxml2xmltest.c | 1 + 5 files changed, 44 insertions(+), 4 deletions(-) create mode 100644 tests/storagepoolxml2xmlin/pool-rbd-ipv6.xml create mode 100644 tests/storagepoolxml2xmlout/pool-rbd-ipv6.xml
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to librados.
Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.
Signed-off-by: Yi Li <yili@winhong.com>
---
docs/schemas/storagepool.rng | 5 ++++-
src/storage/storage_backend_rbd.c | 13 ++++++++++---
tests/storagepoolxml2xmlin/pool-rbd-ipv6.xml | 13 +++++++++++++
tests/storagepoolxml2xmlout/pool-rbd-ipv6.xml | 16 ++++++++++++++++
tests/storagepoolxml2xmltest.c | 1 +
5 files changed, 44 insertions(+), 4 deletions(-)
create mode 100644 tests/storagepoolxml2xmlin/pool-rbd-ipv6.xml
create mode 100644 tests/storagepoolxml2xmlout/pool-rbd-ipv6.xml
diff --git a/docs/schemas/storagepool.rng b/docs/schemas/storagepool.rng
index 3ca8e79..976a02b 100644
--- a/docs/schemas/storagepool.rng
+++ b/docs/schemas/storagepool.rng
@@ -305,7 +305,10 @@
<oneOrMore>
<element name='host'>
<attribute name='name'>
- <text/>
+ <choice>
+ <ref name="dnsName"/>
+ <ref name="ipAddr"/>
+ </choice>
</attribute>
<optional>
<attribute name='port'>
diff --git a/src/storage/storage_backend_rbd.c b/src/storage/storage_backend_rbd.c
index f8c968e..3056563 100644
--- a/src/storage/storage_backend_rbd.c
+++ b/src/storage/storage_backend_rbd.c
@@ -268,9 +268,16 @@ virStorageBackendRBDOpenRADOSConn(virStorageBackendRBDStatePtr ptr,
source->hosts[i].name);
} else if (source->hosts[i].name != NULL &&
source->hosts[i].port) {
- virBufferAsprintf(&mon_host, "%s:%d,",
- source->hosts[i].name,
- source->hosts[i].port);
+ /* assume host containing : is ipv6 */
+ if (strchr(source->hosts[i].name, ':')) {
+ virBufferAsprintf(&mon_host, "[%s]:%d,",
+ source->hosts[i].name,
+ source->hosts[i].port);
+ } else {
+ virBufferAsprintf(&mon_host, "%s:%d,",
+ source->hosts[i].name,
+ source->hosts[i].port);
+ }
} else {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
_("received malformed monitor, check the XML definition"));
diff --git a/tests/storagepoolxml2xmlin/pool-rbd-ipv6.xml b/tests/storagepoolxml2xmlin/pool-rbd-ipv6.xml
new file mode 100644
index 0000000..0744b33
--- /dev/null
+++ b/tests/storagepoolxml2xmlin/pool-rbd-ipv6.xml
@@ -0,0 +1,13 @@
+<pool type='rbd'>
+ <name>ceph</name>
+ <uuid>47c1faee-0207-e741-f5ae-d9b019b98fe2</uuid>
+ <source>
+ <name>rbd</name>
+ <host name='localhost' port='6789'/>
+ <host name='localhost' port='6790'/>
+ <host name='2205::192:168:205:141' port='6789'/>
+ <auth username='admin' type='ceph'>
+ <secret uuid='2ec115d7-3a88-3ceb-bc12-0ac909a6fd87'/>
+ </auth>
+ </source>
+</pool>
diff --git a/tests/storagepoolxml2xmlout/pool-rbd-ipv6.xml b/tests/storagepoolxml2xmlout/pool-rbd-ipv6.xml
new file mode 100644
index 0000000..cc2a379
--- /dev/null
+++ b/tests/storagepoolxml2xmlout/pool-rbd-ipv6.xml
@@ -0,0 +1,16 @@
+<pool type='rbd'>
+ <name>ceph</name>
+ <uuid>47c1faee-0207-e741-f5ae-d9b019b98fe2</uuid>
+ <capacity unit='bytes'>0</capacity>
+ <allocation unit='bytes'>0</allocation>
+ <available unit='bytes'>0</available>
+ <source>
+ <host name='localhost' port='6789'/>
+ <host name='localhost' port='6790'/>
+ <host name='2205::192:168:205:141' port='6789'/>
+ <name>rbd</name>
+ <auth type='ceph' username='admin'>
+ <secret uuid='2ec115d7-3a88-3ceb-bc12-0ac909a6fd87'/>
+ </auth>
+ </source>
+</pool>
diff --git a/tests/storagepoolxml2xmltest.c b/tests/storagepoolxml2xmltest.c
index 2ae514f..b6f4cb4 100644
--- a/tests/storagepoolxml2xmltest.c
+++ b/tests/storagepoolxml2xmltest.c
@@ -95,6 +95,7 @@ mymain(void)
DO_TEST("pool-zfs-sourcedev");
DO_TEST("pool-rbd");
#ifdef WITH_STORAGE_RBD
+ DO_TEST("pool-rbd-ipv6");
DO_TEST("pool-rbd-refresh-volume-allocation");
DO_TEST("pool-rbd-ns-configopts");
#endif
--
2.7.5
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
On Thu, Apr 25, 2019 at 02:19:37PM +0800, Yi Li wrote: >Hosts for rbd are ceph monitor daemons. These have fixed IP addresses, >so they are often referenced by IP rather than hostname for >convenience, or to avoid relying on DNS. Using IPv4 addresses as the >host name works already, but IPv6 addresses require rbd-specific If you include the escaping in the XML, does it currently work? <host name='[2205::192:168:205:141]' port='6789'/> >escaping because the colon is used as an option separator in the >string passed to librados. > >Escape these colons, and enclose the IPv6 address in square brackets >so it is distinguished from the port, which is currently mandatory. > >Signed-off-by: Yi Li <yili@winhong.com> >--- > docs/schemas/storagepool.rng | 5 ++++- > src/storage/storage_backend_rbd.c | 13 ++++++++++--- > tests/storagepoolxml2xmlin/pool-rbd-ipv6.xml | 13 +++++++++++++ > tests/storagepoolxml2xmlout/pool-rbd-ipv6.xml | 16 ++++++++++++++++ > tests/storagepoolxml2xmltest.c | 1 + > 5 files changed, 44 insertions(+), 4 deletions(-) > create mode 100644 tests/storagepoolxml2xmlin/pool-rbd-ipv6.xml > create mode 100644 tests/storagepoolxml2xmlout/pool-rbd-ipv6.xml > >diff --git a/src/storage/storage_backend_rbd.c b/src/storage/storage_backend_rbd.c >index f8c968e..3056563 100644 >--- a/src/storage/storage_backend_rbd.c >+++ b/src/storage/storage_backend_rbd.c >@@ -268,9 +268,16 @@ virStorageBackendRBDOpenRADOSConn(virStorageBackendRBDStatePtr ptr, > source->hosts[i].name); > } else if (source->hosts[i].name != NULL && > source->hosts[i].port) { >- virBufferAsprintf(&mon_host, "%s:%d,", >- source->hosts[i].name, >- source->hosts[i].port); >+ /* assume host containing : is ipv6 */ >+ if (strchr(source->hosts[i].name, ':')) { if (virSocketAddrNumericFamily(listenAddress) == AF_INET6) By using this helper function, we won't try to escape an address that is already escaped. Also, instead of copying the whole virBuffer call twice, it would be nicer to assign the format to a temporary variable like we do in qemuMigrationDstPrepare Jano >+ virBufferAsprintf(&mon_host, "[%s]:%d,", >+ source->hosts[i].name, >+ source->hosts[i].port); >+ } else { >+ virBufferAsprintf(&mon_host, "%s:%d,", >+ source->hosts[i].name, >+ source->hosts[i].port); >+ } > } else { > virReportError(VIR_ERR_INTERNAL_ERROR, "%s", > _("received malformed monitor, check the XML definition")); -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
© 2016 - 2024 Red Hat, Inc.