[edk2-devel] [PATCH v2 2/4] Platform/AMD/PlatformPkg: Adds PciHotPlug init protocol implementation

Abdul Lateef Attar via groups.io posted 4 patches 1 year, 3 months ago
There is a newer version of this series
[edk2-devel] [PATCH v2 2/4] Platform/AMD/PlatformPkg: Adds PciHotPlug init protocol implementation
Posted by Abdul Lateef Attar via groups.io 1 year, 3 months ago
Adds PCI hotplug init protocol implementation.

Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Abner Chang <abner.chang@amd.com
Cc: Michael D Kinney <michael.d.kinney@intel.com>
---
 Platform/AMD/PlatformPkg/PlatformPkg.dec      |  16 +
 Platform/AMD/PlatformPkg/PlatformPkg.dsc      |  23 ++
 .../PlatformPkg/PciHotPlug/PciHotPlugInit.inf |  41 +++
 .../PlatformPkg/PciHotPlug/PciHotPlugInit.c   | 340 ++++++++++++++++++
 4 files changed, 420 insertions(+)
 create mode 100644 Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.inf
 create mode 100644 Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.c

diff --git a/Platform/AMD/PlatformPkg/PlatformPkg.dec b/Platform/AMD/PlatformPkg/PlatformPkg.dec
index 6155860979cb..1bc38d6025c3 100644
--- a/Platform/AMD/PlatformPkg/PlatformPkg.dec
+++ b/Platform/AMD/PlatformPkg/PlatformPkg.dec
@@ -13,3 +13,19 @@ [Defines]
   PACKAGE_NAME                   = PlatformPkg
   PACKAGE_GUID                   = 38FBA311-E2AA-4620-9A90-9A23753D1878
   PACKAGE_VERSION                = 0.1
+
+[Guids]
+  gPlatformPkgTokenSpaceGuid     = { 0x95ECA58D, 0x09B6, 0x4420, { 0xB4, 0xE7, 0x01, 0x7F, 0x6A, 0x5B, 0x26, 0x0F }}
+
+[PcdsDynamic, PcdsDynamicEx]
+  #
+  # PCI HotPlug Resource Padding
+  #
+  # IO Resource padding in bytes, default 4KB
+  gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadIO|0x00001000|UINT64|0x10000000
+  # PreFetch Memory padding in bytes, default 2MB
+  gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadPMem|0x00200000|UINT64|0x10000001
+  # Non-PreFetch Memory padding in bytes, default 1MB
+  gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadMem|0x00100000|UINT64|0x10000002
+  # PCI bus padding, number of bus to reserve, default 2 bus
+  gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadBus|2|UINT8|0x10000003
diff --git a/Platform/AMD/PlatformPkg/PlatformPkg.dsc b/Platform/AMD/PlatformPkg/PlatformPkg.dsc
index 704566b9ea73..9a693070ab3f 100644
--- a/Platform/AMD/PlatformPkg/PlatformPkg.dsc
+++ b/Platform/AMD/PlatformPkg/PlatformPkg.dsc
@@ -16,5 +16,28 @@ [Defines]
   BUILD_TARGETS               = DEBUG | RELEASE | NOOPT
   SUPPORTED_ARCHITECTURES     = IA32 | X64
 
+
 [Packages]
   PlatformPkg/PlatformPkg.dec
+  MdeModulePkg/MdeModulePkg.dec
+  MdePkg/MdePkg.dec
+
+[LibraryClasses.Common]
+  UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf
+  UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf
+  DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
+  MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+  BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+  BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
+  PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
+  RegisterFilterLib|MdePkg/Library/RegisterFilterLibNull/RegisterFilterLibNull.inf
+  SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
+  PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+  DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
+  IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
+  PlatformHookLib|MdeModulePkg/Library/BasePlatformHookLibNull/BasePlatformHookLibNull.inf
+  PciLib|MdePkg/Library/BasePciLibPciExpress/BasePciLibPciExpress.inf
+  PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
+
+[Components.X64]
+  PlatformPkg/PciHotPlug/PciHotPlugInit.inf
diff --git a/Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.inf b/Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.inf
new file mode 100644
index 000000000000..0079c4acf14e
--- /dev/null
+++ b/Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.inf
@@ -0,0 +1,41 @@
+## @file
+# This driver implements EFI_PCI_HOT_PLUG_INIT_PROTOCOL.
+# Adds resource padding information, for PCIe hotplug purposes.
+#
+# Copyright (C) 2023 Advanced Micro Devices, Inc. All rights reserved
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+##
+
+[Defines]
+  INF_VERSION                    = 1.29
+  BASE_NAME                      = PciHotPlugInit
+  FILE_GUID                      = 8B67D95F-78B7-484F-8F16-5F22AB388B0C
+  MODULE_TYPE                    = DXE_DRIVER
+  VERSION_STRING                 = 0.1
+  ENTRY_POINT                    = PciHotPlugInitialize
+
+[Sources]
+  PciHotPlugInit.c
+
+[Packages]
+  MdeModulePkg/MdeModulePkg.dec
+  MdePkg/MdePkg.dec
+  PlatformPkg/PlatformPkg.dec
+
+[LibraryClasses]
+  UefiDriverEntryPoint
+  UefiBootServicesTableLib
+  DebugLib
+  MemoryAllocationLib
+
+[Protocols]
+  gEfiPciHotPlugInitProtocolGuid
+
+[Pcd]
+  gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadIO
+  gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadPMem
+  gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadMem
+  gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadBus
+
+[Depex]
+  TRUE
diff --git a/Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.c b/Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.c
new file mode 100644
index 000000000000..b977406bbcae
--- /dev/null
+++ b/Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.c
@@ -0,0 +1,340 @@
+/** @file
+  This file declares EFI PCI Hot Plug Init Protocol.
+
+  This protocol provides the necessary functionality to initialize the Hot Plug
+  Controllers (HPCs) and the buses that they control. This protocol also provides
+  information regarding resource padding.
+
+  @par Note:
+    This source has the reference of OVMF PciHotPluginit.c and Intel platform PciHotPlug.c.
+
+    This protocol is required only on platforms that support one or more PCI Hot
+    Plug* slots or CardBus sockets.
+
+  The EFI_PCI_HOT_PLUG_INIT_PROTOCOL provides a mechanism for the PCI bus enumerator
+  to properly initialize the HPCs and CardBus sockets that require initialization.
+  The HPC initialization takes place before the PCI enumeration process is complete.
+  There cannot be more than one instance of this protocol in a system. This protocol
+  is installed on its own separate handle.
+
+  Because the system may include multiple HPCs, one instance of this protocol
+  should represent all of them. The protocol functions use the device path of
+  the HPC to identify the HPC. When the PCI bus enumerator finds a root HPC, it
+  will call EFI_PCI_HOT_PLUG_INIT_PROTOCOL.InitializeRootHpc(). If InitializeRootHpc()
+  is unable to initialize a root HPC, the PCI enumerator will ignore that root HPC
+  and continue the enumeration process. If the HPC is not initialized, the devices
+  that it controls may not be initialized, and no resource padding will be provided.
+
+  From the standpoint of the PCI bus enumerator, HPCs are divided into the following
+  two classes:
+
+    - Root HPC:
+        These HPCs must be initialized by calling InitializeRootHpc() during the
+        enumeration process. These HPCs will also require resource padding. The
+        platform code must have a priori knowledge of these devices and must know
+        how to initialize them. There may not be any way to access their PCI
+        configuration space before the PCI enumerator programs all the upstream
+        bridges and thus enables the path to these devices. The PCI bus enumerator
+        is responsible for determining the PCI bus address of the HPC before it
+        calls InitializeRootHpc().
+    - Nonroot HPC:
+        These HPCs will not need explicit initialization during enumeration process.
+        These HPCs will require resource padding. The platform code does not have
+        to have a priori knowledge of these devices.
+
+  Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
+  Copyright (C) 2016, Red Hat, Inc.<BR>
+  Copyright (C) 2023 Advanced Micro Devices, Inc. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+
+  @par Revision Reference:
+  This Protocol is defined in UEFI Platform Initialization Specification 1.2
+  Volume 5: Standards
+
+**/
+
+#include <Uefi/UefiBaseType.h>
+#include <Uefi/UefiSpec.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/DebugLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Protocol/PciHotPlugInit.h>
+
+//
+// The protocol interface this driver produces.
+//
+STATIC EFI_PCI_HOT_PLUG_INIT_PROTOCOL  mPciHotPlugInit;
+
+/**
+  Returns a list of root Hot Plug Controllers (HPCs) that require initialization
+  during the boot process.
+
+  This procedure returns a list of root HPCs. The PCI bus driver must initialize
+  these controllers during the boot process. The PCI bus driver may or may not be
+  able to detect these HPCs. If the platform includes a PCI-to-CardBus bridge, it
+  can be included in this list if it requires initialization.  The HpcList must be
+  self consistent. An HPC cannot control any of its parent buses. Only one HPC can
+  control a PCI bus. Because this list includes only root HPCs, no HPC in the list
+  can be a child of another HPC. This policy must be enforced by the
+  EFI_PCI_HOT_PLUG_INIT_PROTOCOL.   The PCI bus driver may not check for such
+  invalid conditions.  The callee allocates the buffer HpcList
+
+  @param[in]  This       Pointer to the EFI_PCI_HOT_PLUG_INIT_PROTOCOL instance.
+  @param[out] HpcCount   The number of root HPCs that were returned.
+  @param[out] HpcList    The list of root HPCs. HpcCount defines the number of
+                         elements in this list.
+
+  @retval EFI_SUCCESS             HpcList was returned.
+  @retval EFI_OUT_OF_RESOURCES    HpcList was not returned due to insufficient
+                                  resources.
+  @retval EFI_INVALID_PARAMETER   HpcCount is NULL or HpcList is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+GetRootHpcList (
+  IN  EFI_PCI_HOT_PLUG_INIT_PROTOCOL  *This,
+  OUT UINTN                           *HpcCount,
+  OUT EFI_HPC_LOCATION                **HpcList
+  )
+{
+  if ((HpcCount == NULL) || (HpcList == NULL)) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  //
+  // Platform BIOS not doing any extra/special HPC initialization
+  // Hence returning the HpcCount as zero and HpcList as NULL
+  //
+  *HpcCount = 0;
+  *HpcList  = NULL;
+
+  return EFI_SUCCESS;
+}
+
+/**
+  Initializes one root Hot Plug Controller (HPC). This process may causes
+  initialization of its subordinate buses.
+
+  This function initializes the specified HPC. At the end of initialization,
+  the hot-plug slots or sockets (controlled by this HPC) are powered and are
+  connected to the bus. All the necessary registers in the HPC are set up. For
+  a Standard (PCI) Hot Plug Controller (SHPC), the registers that must be set
+  up are defined in the PCI Standard Hot Plug Controller and Subsystem
+  Specification.
+
+  @param[in]  This            Pointer to the EFI_PCI_HOT_PLUG_INIT_PROTOCOL instance.
+  @param[in]  HpcDevicePath   The device path to the HPC that is being initialized.
+  @param[in]  HpcPciAddress   The address of the HPC function on the PCI bus.
+  @param[in]  Event           The event that should be signaled when the HPC
+                              initialization is complete.  Set to NULL if the
+                              caller wants to wait until the entire initialization
+                              process is complete.
+  @param[out] HpcState        The state of the HPC hardware. The state is
+                              EFI_HPC_STATE_INITIALIZED or EFI_HPC_STATE_ENABLED.
+
+  @retval EFI_SUCCESS             If Event is NULL, the specific HPC was successfully
+                                  initialized. If Event is not NULL, Event will be
+                                  signaled at a later time when initialization is complete.
+  @retval EFI_UNSUPPORTED         This instance of EFI_PCI_HOT_PLUG_INIT_PROTOCOL
+                                  does not support the specified HPC.
+  @retval EFI_OUT_OF_RESOURCES    Initialization failed due to insufficient
+                                  resources.
+  @retval EFI_INVALID_PARAMETER   HpcState is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+InitializeRootHpc (
+  IN  EFI_PCI_HOT_PLUG_INIT_PROTOCOL *This,
+  IN  EFI_DEVICE_PATH_PROTOCOL *HpcDevicePath,
+  IN  UINT64 HpcPciAddress,
+  IN  EFI_EVENT Event, OPTIONAL
+  OUT EFI_HPC_STATE                   *HpcState
+  )
+{
+  if (HpcState == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  //
+  // This Platform doesnt have any non-enumerated HPC.
+  // Hence no extra initialization required from Platform BIOS.
+  //
+  return EFI_UNSUPPORTED;
+}
+
+/**
+  Returns the resource padding that is required by the PCI bus that is controlled
+  by the specified Hot Plug Controller (HPC).
+
+  This function returns the resource padding that is required by the PCI bus that
+  is controlled by the specified HPC. This member function is called for all the
+  root HPCs and nonroot HPCs that are detected by the PCI bus enumerator. This
+  function will be called before PCI resource allocation is completed. This function
+  must be called after all the root HPCs, with the possible exception of a
+  PCI-to-CardBus bridge, have completed initialization.
+
+  @param[in]  This            Pointer to the EFI_PCI_HOT_PLUG_INIT_PROTOCOL instance.
+  @param[in]  HpcDevicePath   The device path to the HPC.
+  @param[in]  HpcPciAddress   The address of the HPC function on the PCI bus.
+  @param[out] HpcState        The state of the HPC hardware.
+  @param[out] Padding         The amount of resource padding that is required by the
+                              PCI bus under the control of the specified HPC.
+  @param[out] Attributes      Describes how padding is accounted for. The padding
+                              is returned in the form of ACPI 2.0 resource descriptors.
+
+  @retval EFI_SUCCESS             The resource padding was successfully returned.
+  @retval EFI_UNSUPPORTED         This instance of the EFI_PCI_HOT_PLUG_INIT_PROTOCOL
+                                  does not support the specified HPC.
+  @retval EFI_NOT_READY           This function was called before HPC initialization
+                                  is complete.
+  @retval EFI_INVALID_PARAMETER   HpcState or Padding or Attributes is NULL.
+  @retval EFI_OUT_OF_RESOURCES    ACPI 2.0 resource descriptors for Padding
+                                  cannot be allocated due to insufficient resources.
+
+**/
+EFI_STATUS
+EFIAPI
+GetResourcePadding (
+  IN  EFI_PCI_HOT_PLUG_INIT_PROTOCOL  *This,
+  IN  EFI_DEVICE_PATH_PROTOCOL        *HpcDevicePath,
+  IN  UINT64                          HpcPciAddress,
+  OUT EFI_HPC_STATE                   *HpcState,
+  OUT VOID                            **Padding,
+  OUT EFI_HPC_PADDING_ATTRIBUTES      *Attributes
+  )
+{
+  EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR  *PaddingResource;
+
+  //
+  // Need total 5 resources
+  // 1 - IO resource
+  // 2 - Mem resource
+  // 3 - PMem resource
+  // 4 - Bus resource
+  // 5 - end tag resource
+  PaddingResource = AllocateZeroPool (4 * sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof (EFI_ACPI_END_TAG_DESCRIPTOR));
+  if (PaddingResource == NULL) {
+    return EFI_OUT_OF_RESOURCES;
+  }
+
+  *Padding = (VOID *)PaddingResource;
+
+  //
+  // Padding for bus
+  //
+  *Attributes = EfiPaddingPciBus;
+
+  PaddingResource->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
+  PaddingResource->Len  = (UINT16)(
+                                   sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) -
+                                   OFFSET_OF (
+                                     EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR,
+                                     ResType
+                                     )
+                                   );
+  PaddingResource->ResType      = ACPI_ADDRESS_SPACE_TYPE_BUS;
+  PaddingResource->GenFlag      = 0x0;
+  PaddingResource->SpecificFlag = 0;
+  PaddingResource->AddrRangeMin = 0;
+  PaddingResource->AddrRangeMax = 0;
+  PaddingResource->AddrLen      = PcdGet8 (PcdPciHotPlugResourcePadBus);
+
+  //
+  // Padding for non-prefetchable memory
+  //
+  PaddingResource++;
+  PaddingResource->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
+  PaddingResource->Len  = (UINT16)(
+                                   sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) -
+                                   OFFSET_OF (
+                                     EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR,
+                                     ResType
+                                     )
+                                   );
+  PaddingResource->ResType              = ACPI_ADDRESS_SPACE_TYPE_MEM;
+  PaddingResource->GenFlag              = 0x0;
+  PaddingResource->AddrSpaceGranularity = 32;
+  PaddingResource->SpecificFlag         = EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_NON_CACHEABLE;
+  PaddingResource->AddrRangeMin         = 0;
+  PaddingResource->AddrLen              = PcdGet64 (PcdPciHotPlugResourcePadMem);
+  PaddingResource->AddrRangeMax         = PaddingResource->AddrLen - 1;
+
+  //
+  // Padding for prefetchable memory
+  //
+  PaddingResource++;
+  PaddingResource->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
+  PaddingResource->Len  = (UINT16)(
+                                   sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) -
+                                   OFFSET_OF (
+                                     EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR,
+                                     ResType
+                                     )
+                                   );
+  PaddingResource->ResType              = ACPI_ADDRESS_SPACE_TYPE_MEM;
+  PaddingResource->GenFlag              = 0x0;
+  PaddingResource->AddrSpaceGranularity = 32;
+  PaddingResource->SpecificFlag         = EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE;
+  PaddingResource->AddrLen              = PcdGet64 (PcdPciHotPlugResourcePadPMem);
+  PaddingResource->AddrRangeMax         = PaddingResource->AddrLen - 1;
+
+  //
+  // Padding for I/O
+  //
+  PaddingResource++;
+  PaddingResource->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
+  PaddingResource->Len  = (UINT16)(
+                                   sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) -
+                                   OFFSET_OF (
+                                     EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR,
+                                     ResType
+                                     )
+                                   );
+  PaddingResource->ResType      = ACPI_ADDRESS_SPACE_TYPE_IO;
+  PaddingResource->GenFlag      = 0x0;
+  PaddingResource->SpecificFlag = 0;
+  PaddingResource->AddrRangeMin = 0;
+  PaddingResource->AddrLen      = PcdGet64 (PcdPciHotPlugResourcePadIO);
+  PaddingResource->AddrRangeMax = PaddingResource->AddrLen - 1;
+
+  //
+  // Terminate the entries.
+  //
+  PaddingResource++;
+  ((EFI_ACPI_END_TAG_DESCRIPTOR *)PaddingResource)->Desc     = ACPI_END_TAG_DESCRIPTOR;
+  ((EFI_ACPI_END_TAG_DESCRIPTOR *)PaddingResource)->Checksum = 0x0;
+
+  *HpcState = EFI_HPC_STATE_INITIALIZED | EFI_HPC_STATE_ENABLED;
+
+  return EFI_SUCCESS;
+}
+
+/**
+  Entry point for this driver.
+
+  @param[in] ImageHandle  Image handle of this driver.
+  @param[in] SystemTable  Pointer to SystemTable.
+
+  @retval EFI_SUCESS       Driver has loaded successfully.
+  @return                  Error codes from lower level functions.
+
+**/
+EFI_STATUS
+EFIAPI
+PciHotPlugInitialize (
+  IN EFI_HANDLE        ImageHandle,
+  IN EFI_SYSTEM_TABLE  *SystemTable
+  )
+{
+  mPciHotPlugInit.GetRootHpcList     = GetRootHpcList;
+  mPciHotPlugInit.InitializeRootHpc  = InitializeRootHpc;
+  mPciHotPlugInit.GetResourcePadding = GetResourcePadding;
+  return gBS->InstallMultipleProtocolInterfaces (
+                &ImageHandle,
+                &gEfiPciHotPlugInitProtocolGuid,
+                &mPciHotPlugInit,
+                NULL
+                );
+}
-- 
2.25.1



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#101304): https://edk2.groups.io/g/devel/message/101304
Mute This Topic: https://groups.io/mt/97667843/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-