[edk2-devel] [edk] [PATCH] ShellPkg/edit: allow non-ASCII characters in edit

Heinrich Schuchardt posted 1 patch 4 years, 4 months ago
Failed in applying to current master (apply log)
There is a newer version of this series
.../Edit/FileBuffer.c                         | 21 +++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
[edk2-devel] [edk] [PATCH] ShellPkg/edit: allow non-ASCII characters in edit
Posted by Heinrich Schuchardt 4 years, 4 months ago
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2339

Currently it is not possible to add letters outside the range
U+0020 - U+007F to a file using the edit command.

In Unicode the following are control characters:

* U+0000—U+001F (C0 controls)
* U+007F (DEL)
* U+0080—U+009F (C1 controls).

For reference see:

* https://unicode.org/charts/PDF/U0000.pdf
* https://unicode.org/charts/PDF/U0080.pdf

So the characters we should exclude from the file buffer are:
U+0000 - U+001f, U+007f - U009F

Allow all other characters as input to the file buffer in Unicode mode.
Allow only ASCII characters as input in ASCII mode.

When saving a file in ASCII mode replace non-ASCII characters by a question
mark ('?').

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
---
Resent due to a typo in Limings email-address.
---
 .../Edit/FileBuffer.c                         | 21 +++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/ShellPkg/Library/UefiShellDebug1CommandsLib/Edit/FileBuffer.c b/ShellPkg/Library/UefiShellDebug1CommandsLib/Edit/FileBuffer.c
index fd324cc4a8..12235e4e4b 100644
--- a/ShellPkg/Library/UefiShellDebug1CommandsLib/Edit/FileBuffer.c
+++ b/ShellPkg/Library/UefiShellDebug1CommandsLib/Edit/FileBuffer.c
@@ -1360,6 +1360,8 @@ GetNewLine (
 /**

   Change a Unicode string to an ASCII string.

 

+  Non-ASCII characters are replaced by '?'.

+

   @param[in] UStr     The Unicode string.

   @param[in] Length   The maximum size of AStr.

   @param[out] AStr    ASCII string to pass out.

@@ -1378,8 +1380,12 @@ UnicodeToAscii (
   //

   // just buffer copy, not character copy

   //

-  for (Index = 0; Index < Length; Index++) {

-    *AStr++ = (CHAR8) *UStr++;

+  for (Index = 0; Index < Length; Index++, UStr++) {

+    if (*UStr < 0x80) {

+      *AStr++ = (CHAR8) *UStr;

+    } else {

+      *AStr++ = '?';

+    }

   }

 

   return Index;

@@ -2154,9 +2160,16 @@ FileBufferDoCharInput (
 

   default:

     //

-    // DEAL WITH ASCII CHAR, filter out thing like ctrl+f

+    // Do not add Unicode control characters to the file buffer:

+    //

+    // * U+0000-U+001f (C0 controls)

+    // * U+007f (DEL)

+    // * U+0080-U+009f (C1 controls)

+    //

+    // Do not add non-ASCII characters in ASCII mode.

     //

-    if (Char > 127 || Char < 32) {

+    if (Char < 0x20 || (Char >= 0x7f &&

+        (Char <= 0x9f || FileBuffer.FileType == FileTypeAscii))) {

       Status = StatusBarSetStatusString (L"Unknown Command");

     } else {

       Status = FileBufferAddChar (Char);

-- 
2.24.0


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#51207): https://edk2.groups.io/g/devel/message/51207
Mute This Topic: https://groups.io/mt/61872994/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [edk2-devel] [edk] [PATCH] ShellPkg/edit: allow non-ASCII characters in edit
Posted by Laszlo Ersek 3 years, 4 months ago
On 11/24/19 11:37, Heinrich Schuchardt via Groups.Io wrote:
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2339
> 
> Currently it is not possible to add letters outside the range
> U+0020 - U+007F to a file using the edit command.
> 
> In Unicode the following are control characters:
> 
> * U+0000—U+001F (C0 controls)
> * U+007F (DEL)
> * U+0080—U+009F (C1 controls).
> 
> For reference see:
> 
> * https://unicode.org/charts/PDF/U0000.pdf
> * https://unicode.org/charts/PDF/U0080.pdf
> 
> So the characters we should exclude from the file buffer are:
> U+0000 - U+001f, U+007f - U009F
> 
> Allow all other characters as input to the file buffer in Unicode mode.
> Allow only ASCII characters as input in ASCII mode.
> 
> When saving a file in ASCII mode replace non-ASCII characters by a question
> mark ('?').
> 
> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
> ---
> Resent due to a typo in Limings email-address.
> ---

(1) Please run "BaseTools/Scripts/SetupGit.py" in your edk2 clone.

(2) This patch was lost because the ShellPkg maintainers were not CC'd.

I suggest resending the patch, with the Content-Transfer-Encoding fixed
(8bit or base64, per (1)), and with the following folks CC'd (per (2)):

  Ray Ni <ray.ni@intel.com>
  Zhichao Gao <zhichao.gao@intel.com>

Thanks
Laszlo

>  .../Edit/FileBuffer.c                         | 21 +++++++++++++++----
>  1 file changed, 17 insertions(+), 4 deletions(-)
> 
> diff --git a/ShellPkg/Library/UefiShellDebug1CommandsLib/Edit/FileBuffer.c b/ShellPkg/Library/UefiShellDebug1CommandsLib/Edit/FileBuffer.c
> index fd324cc4a8..12235e4e4b 100644
> --- a/ShellPkg/Library/UefiShellDebug1CommandsLib/Edit/FileBuffer.c
> +++ b/ShellPkg/Library/UefiShellDebug1CommandsLib/Edit/FileBuffer.c
> @@ -1360,6 +1360,8 @@ GetNewLine (
>  /**
> 
>    Change a Unicode string to an ASCII string.
> 
>  
> 
> +  Non-ASCII characters are replaced by '?'.
> 
> +
> 
>    @param[in] UStr     The Unicode string.
> 
>    @param[in] Length   The maximum size of AStr.
> 
>    @param[out] AStr    ASCII string to pass out.
> 
> @@ -1378,8 +1380,12 @@ UnicodeToAscii (
>    //
> 
>    // just buffer copy, not character copy
> 
>    //
> 
> -  for (Index = 0; Index < Length; Index++) {
> 
> -    *AStr++ = (CHAR8) *UStr++;
> 
> +  for (Index = 0; Index < Length; Index++, UStr++) {
> 
> +    if (*UStr < 0x80) {
> 
> +      *AStr++ = (CHAR8) *UStr;
> 
> +    } else {
> 
> +      *AStr++ = '?';
> 
> +    }
> 
>    }
> 
>  
> 
>    return Index;
> 
> @@ -2154,9 +2160,16 @@ FileBufferDoCharInput (
>  
> 
>    default:
> 
>      //
> 
> -    // DEAL WITH ASCII CHAR, filter out thing like ctrl+f
> 
> +    // Do not add Unicode control characters to the file buffer:
> 
> +    //
> 
> +    // * U+0000-U+001f (C0 controls)
> 
> +    // * U+007f (DEL)
> 
> +    // * U+0080-U+009f (C1 controls)
> 
> +    //
> 
> +    // Do not add non-ASCII characters in ASCII mode.
> 
>      //
> 
> -    if (Char > 127 || Char < 32) {
> 
> +    if (Char < 0x20 || (Char >= 0x7f &&
> 
> +        (Char <= 0x9f || FileBuffer.FileType == FileTypeAscii))) {
> 
>        Status = StatusBarSetStatusString (L"Unknown Command");
> 
>      } else {
> 
>        Status = FileBufferAddChar (Char);
> 



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#66880): https://edk2.groups.io/g/devel/message/66880
Mute This Topic: https://groups.io/mt/61872994/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-