[edk2-devel] [PATCH] MdeModulePkg: Add definitions for NVM Express Passthru PPI

Maggie Chu posted 1 patch 4 years, 9 months ago
Failed in applying to current master (apply log)
MdeModulePkg/Include/Ppi/NvmExpressPassThru.h | 156 ++++++++++++++++++++++++++
MdeModulePkg/MdeModulePkg.dec                 |   3 +
2 files changed, 159 insertions(+)
create mode 100644 MdeModulePkg/Include/Ppi/NvmExpressPassThru.h
[edk2-devel] [PATCH] MdeModulePkg: Add definitions for NVM Express Passthru PPI
Posted by Maggie Chu 4 years, 9 months ago
https://bugzilla.tianocore.org/show_bug.cgi?id=1879
This commit will add the definitions of Nvm Express PassThru PPI.
This PPI will provide services that allow NVM commands to be sent
to NVM Express devices during PEI phase.

More specifically, the PPI will provide services to:

* Sends an NVM Express Command Packet to an NVM Express controller
  or namespace (by service 'PassThru');
* Get the list of the attached namespaces on a controller
  (by services 'GetNextNameSpace');
* Get the identification information (DevicePath) of the underlying
  NVM Express host controller (by service 'GetDevicePath').

Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
---
 MdeModulePkg/Include/Ppi/NvmExpressPassThru.h | 156 ++++++++++++++++++++++++++
 MdeModulePkg/MdeModulePkg.dec                 |   3 +
 2 files changed, 159 insertions(+)
 create mode 100644 MdeModulePkg/Include/Ppi/NvmExpressPassThru.h

diff --git a/MdeModulePkg/Include/Ppi/NvmExpressPassThru.h b/MdeModulePkg/Include/Ppi/NvmExpressPassThru.h
new file mode 100644
index 0000000000..cb5b3b3b18
--- /dev/null
+++ b/MdeModulePkg/Include/Ppi/NvmExpressPassThru.h
@@ -0,0 +1,156 @@
+/** @file
+
+  Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef _EDKII_NVME_PASS_THRU_PPI_H_
+#define _EDKII_NVME_PASS_THRU_PPI_H_
+
+#include <Protocol/DevicePath.h>
+#include <Protocol/NvmExpressPassthru.h>
+
+///
+/// Global ID for the EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI.
+///
+#define EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI_GUID \
+  { \
+    0x6af31b2c, 0x3be, 0x46c1, { 0xb1, 0x2d, 0xea, 0x4a, 0x36, 0xdf, 0xa7, 0x4c } \
+  }
+
+//
+// Forward declaration for the EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI.
+//
+typedef struct _EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI  EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI;
+
+//
+// Revision The revision to which the Nvme Pass Thru PPI interface adheres.
+//          All future revisions must be backwards compatible.
+//          If a future version is not back wards compatible it is not the same GUID.
+//
+#define EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI_REVISION  0x00010000
+
+/**
+  Gets the device path information of the underlying NVM Express host controller.
+
+  @param[in]  This                 The PPI instance pointer.
+  @param[out] DevicePathLength     The length of the device path in bytes specified
+                                   by DevicePath.
+  @param[out] DevicePath           The device path of the underlying NVM Express
+                                   host controller.
+                                   This field re-uses EFI Device Path Protocol as
+                                   defined by Section 10.2 EFI Device Path Protocol
+                                   of UEFI 2.7 Specification.
+
+  @retval EFI_SUCCESS              The operation succeeds.
+  @retval EFI_INVALID_PARAMETER    DevicePathLength or DevicePath is NULL.
+  @retval EFI_OUT_OF_RESOURCES     The operation fails due to lack of resources.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_NVME_PASS_THRU_GET_DEVICE_PATH) (
+  IN  EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI   *This,
+  OUT UINTN                                 *DevicePathLength,
+  OUT EFI_DEVICE_PATH_PROTOCOL              **DevicePath
+  );
+
+/**
+  Used to retrieve the next namespace ID for this NVM Express controller.
+
+  If on input the value pointed to by NamespaceId is 0xFFFFFFFF, then the first
+  valid namespace ID defined on the NVM Express controller is returned in the
+  location pointed to by NamespaceId and a status of EFI_SUCCESS is returned.
+
+  If on input the value pointed to by NamespaceId is an invalid namespace ID
+  other than 0xFFFFFFFF, then EFI_INVALID_PARAMETER is returned.
+
+  If on input the value pointed to by NamespaceId is a valid namespace ID, then
+  the next valid namespace ID on the NVM Express controller is returned in the
+  location pointed to by NamespaceId, and EFI_SUCCESS is returned.
+
+  If the value pointed to by NamespaceId is the namespace ID of the last
+  namespace on the NVM Express controller, then EFI_NOT_FOUND is returned.
+
+  @param[in]     This              The PPI instance pointer.
+  @param[in,out] NamespaceId       On input, a pointer to a legal NamespaceId
+                                   for an NVM Express namespace present on the
+                                   NVM Express controller. On output, a pointer
+                                   to the next NamespaceId of an NVM Express
+                                   namespace on an NVM Express controller. An
+                                   input value of 0xFFFFFFFF retrieves the
+                                   first NamespaceId for an NVM Express
+                                   namespace present on an NVM Express
+                                   controller.
+
+  @retval EFI_SUCCESS            The Namespace ID of the next Namespace was
+                                 returned.
+  @retval EFI_NOT_FOUND          There are no more namespaces defined on this
+                                 controller.
+  @retval EFI_INVALID_PARAMETER  NamespaceId is an invalid value other than
+                                 0xFFFFFFFF.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_NVME_PASS_THRU_GET_NEXT_NAMESPACE)(
+  IN     EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI   *This,
+  IN OUT UINT32                                *NamespaceId
+  );
+
+
+/**
+  Sends an NVM Express Command Packet to an NVM Express controller or namespace. This function only
+  supports blocking execution of the command.
+
+  @param[in] This                  The PPI instance pointer.
+  @param[in] NamespaceId           Is a 32 bit Namespace ID to which the Nvm Express command packet will
+                                   be sent.
+                                   A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in
+                                   the namespace ID specifies that the command packet should be sent to all
+                                   valid namespaces.
+  @param[in,out] Packet            A pointer to the EDKII PEI NVM Express PassThru Command Packet to send
+                                   to the NVMe namespace specified by NamespaceId.
+
+  @retval EFI_SUCCESS              The EDKII PEI NVM Express Command Packet was sent by the host.
+                                   TransferLength bytes were transferred to, or from DataBuffer.
+  @retval EFI_NOT_READY            The EDKII PEI NVM Express Command Packet could not be sent because
+                                   the controller is not ready. The caller may retry again later.
+  @retval EFI_DEVICE_ERROR         A device error occurred while attempting to send the EDKII PEI NVM
+                                   Express Command Packet.
+  @retval EFI_INVALID_PARAMETER    Namespace, or the contents of EDKII_PEI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET
+                                   are invalid.
+                                   The EDKII PEI NVM Express Command Packet was not sent, so no
+                                   additional status information is available.
+  @retval EFI_UNSUPPORTED          The command described by the EDKII PEI NVM Express Command Packet
+                                   is not supported by the host adapter.
+                                   The EDKII PEI NVM Express Command Packet was not sent, so no
+                                   additional status information is available.
+  @retval EFI_TIMEOUT              A timeout occurred while waiting for the EDKII PEI NVM Express Command
+                                   Packet to execute.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_NVME_PASS_THRU_PASSTHRU) (
+  IN     EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI               *This,
+  IN     UINT32                                            NamespaceId,
+  IN OUT EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET          *Packet
+  );
+
+//
+// This PPI contains a set of services to send commands
+// to a mass storage device.
+//
+struct _EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI {
+  UINT64                                           Revision;
+  EFI_NVM_EXPRESS_PASS_THRU_MODE                   *Mode;
+  EDKII_PEI_NVME_PASS_THRU_GET_DEVICE_PATH         GetDevicePath;
+  EDKII_PEI_NVME_PASS_THRU_GET_NEXT_NAMESPACE      GetNextNameSpace;
+  EDKII_PEI_NVME_PASS_THRU_PASSTHRU                PassThru;
+};
+
+extern EFI_GUID gEdkiiPeiNvmExpressPassThruPpiGuid;
+
+#endif
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 6cba729982..8ade6bac0e 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -466,6 +466,9 @@
   ## Include/Ppi/Debug.h
   gEdkiiDebugPpiGuid                        = { 0x999e699c, 0xb013, 0x475e, { 0xb1, 0x7b, 0xf3, 0xa8, 0xae, 0x5c, 0x48, 0x75 } }
 
+  ## Include/Ppi/NvmExpressPassThru.h
+  gEdkiiPeiNvmExpressPassThruPpiGuid    = { 0x6af31b2c, 0x3be, 0x46c1, { 0xb1, 0x2d, 0xea, 0x4a, 0x36, 0xdf, 0xa7, 0x4c } }
+
 [Protocols]
   ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
   #  Include/Protocol/LoadPe32Image.h
-- 
2.16.2.windows.1


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#42472): https://edk2.groups.io/g/devel/message/42472
Mute This Topic: https://groups.io/mt/32090298/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [edk2-devel] [PATCH] MdeModulePkg: Add definitions for NVM Express Passthru PPI
Posted by Wu, Hao A 4 years, 9 months ago
> -----Original Message-----
> From: Chu, Maggie
> Sent: Monday, June 17, 2019 10:11 AM
> To: devel@edk2.groups.io
> Cc: Wu, Hao A; Wang, Jian J; Ni, Ray; Zeng, Star
> Subject: [PATCH] MdeModulePkg: Add definitions for NVM Express Passthru
> PPI
> 
> https://bugzilla.tianocore.org/show_bug.cgi?id=1879
> This commit will add the definitions of Nvm Express PassThru PPI.
> This PPI will provide services that allow NVM commands to be sent
> to NVM Express devices during PEI phase.
> 
> More specifically, the PPI will provide services to:
> 
> * Sends an NVM Express Command Packet to an NVM Express controller
>   or namespace (by service 'PassThru');
> * Get the list of the attached namespaces on a controller
>   (by services 'GetNextNameSpace');
> * Get the identification information (DevicePath) of the underlying
>   NVM Express host controller (by service 'GetDevicePath').
> 
> Signed-off-by: Maggie Chu <maggie.chu@intel.com>
> Cc: Hao A Wu <hao.a.wu@intel.com>
> Cc: Jian J Wang <jian.j.wang@intel.com>
> Cc: Ray Ni <ray.ni@intel.com>
> Cc: Star Zeng <star.zeng@intel.com>
> ---
>  MdeModulePkg/Include/Ppi/NvmExpressPassThru.h | 156
> ++++++++++++++++++++++++++
>  MdeModulePkg/MdeModulePkg.dec                 |   3 +
>  2 files changed, 159 insertions(+)
>  create mode 100644 MdeModulePkg/Include/Ppi/NvmExpressPassThru.h
> 
> diff --git a/MdeModulePkg/Include/Ppi/NvmExpressPassThru.h
> b/MdeModulePkg/Include/Ppi/NvmExpressPassThru.h
> new file mode 100644
> index 0000000000..cb5b3b3b18
> --- /dev/null
> +++ b/MdeModulePkg/Include/Ppi/NvmExpressPassThru.h
> @@ -0,0 +1,156 @@
> +/** @file
> +
> +  Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
> +  SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#ifndef _EDKII_NVME_PASS_THRU_PPI_H_
> +#define _EDKII_NVME_PASS_THRU_PPI_H_
> +
> +#include <Protocol/DevicePath.h>
> +#include <Protocol/NvmExpressPassthru.h>
> +
> +///
> +/// Global ID for the EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI.
> +///
> +#define EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI_GUID \
> +  { \
> +    0x6af31b2c, 0x3be, 0x46c1, { 0xb1, 0x2d, 0xea, 0x4a, 0x36, 0xdf, 0xa7,
> 0x4c } \
> +  }
> +
> +//
> +// Forward declaration for the EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI.
> +//
> +typedef struct _EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI
> EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI;
> +
> +//
> +// Revision The revision to which the Nvme Pass Thru PPI interface adheres.
> +//          All future revisions must be backwards compatible.
> +//          If a future version is not back wards compatible it is not the same
> GUID.
> +//
> +#define EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI_REVISION  0x00010000
> +
> +/**
> +  Gets the device path information of the underlying NVM Express host
> controller.
> +
> +  @param[in]  This                 The PPI instance pointer.
> +  @param[out] DevicePathLength     The length of the device path in bytes
> specified
> +                                   by DevicePath.
> +  @param[out] DevicePath           The device path of the underlying NVM
> Express
> +                                   host controller.
> +                                   This field re-uses EFI Device Path Protocol as
> +                                   defined by Section 10.2 EFI Device Path Protocol
> +                                   of UEFI 2.7 Specification.
> +
> +  @retval EFI_SUCCESS              The operation succeeds.
> +  @retval EFI_INVALID_PARAMETER    DevicePathLength or DevicePath is
> NULL.
> +  @retval EFI_OUT_OF_RESOURCES     The operation fails due to lack of
> resources.
> +
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *EDKII_PEI_NVME_PASS_THRU_GET_DEVICE_PATH) (
> +  IN  EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI   *This,
> +  OUT UINTN                                 *DevicePathLength,
> +  OUT EFI_DEVICE_PATH_PROTOCOL              **DevicePath
> +  );
> +
> +/**
> +  Used to retrieve the next namespace ID for this NVM Express controller.
> +
> +  If on input the value pointed to by NamespaceId is 0xFFFFFFFF, then the
> first
> +  valid namespace ID defined on the NVM Express controller is returned in
> the
> +  location pointed to by NamespaceId and a status of EFI_SUCCESS is
> returned.
> +
> +  If on input the value pointed to by NamespaceId is an invalid namespace
> ID
> +  other than 0xFFFFFFFF, then EFI_INVALID_PARAMETER is returned.
> +
> +  If on input the value pointed to by NamespaceId is a valid namespace ID,
> then
> +  the next valid namespace ID on the NVM Express controller is returned in
> the
> +  location pointed to by NamespaceId, and EFI_SUCCESS is returned.
> +
> +  If the value pointed to by NamespaceId is the namespace ID of the last
> +  namespace on the NVM Express controller, then EFI_NOT_FOUND is
> returned.
> +
> +  @param[in]     This              The PPI instance pointer.
> +  @param[in,out] NamespaceId       On input, a pointer to a legal
> NamespaceId
> +                                   for an NVM Express namespace present on the
> +                                   NVM Express controller. On output, a pointer
> +                                   to the next NamespaceId of an NVM Express
> +                                   namespace on an NVM Express controller. An
> +                                   input value of 0xFFFFFFFF retrieves the
> +                                   first NamespaceId for an NVM Express
> +                                   namespace present on an NVM Express
> +                                   controller.
> +
> +  @retval EFI_SUCCESS            The Namespace ID of the next Namespace was
> +                                 returned.
> +  @retval EFI_NOT_FOUND          There are no more namespaces defined on
> this
> +                                 controller.
> +  @retval EFI_INVALID_PARAMETER  NamespaceId is an invalid value other
> than
> +                                 0xFFFFFFFF.
> +
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *EDKII_PEI_NVME_PASS_THRU_GET_NEXT_NAMESPACE)(
> +  IN     EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI   *This,
> +  IN OUT UINT32                                *NamespaceId
> +  );
> +
> +
> +/**
> +  Sends an NVM Express Command Packet to an NVM Express controller or
> namespace. This function only
> +  supports blocking execution of the command.
> +
> +  @param[in] This                  The PPI instance pointer.
> +  @param[in] NamespaceId           Is a 32 bit Namespace ID to which the Nvm
> Express command packet will
> +                                   be sent.
> +                                   A Value of 0 denotes the NVM Express controller, a Value
> of all 0FFh in
> +                                   the namespace ID specifies that the command packet
> should be sent to all
> +                                   valid namespaces.
> +  @param[in,out] Packet            A pointer to the EDKII PEI NVM Express
> PassThru Command Packet to send
> +                                   to the NVMe namespace specified by NamespaceId.
> +
> +  @retval EFI_SUCCESS              The EDKII PEI NVM Express Command Packet
> was sent by the host.
> +                                   TransferLength bytes were transferred to, or from
> DataBuffer.
> +  @retval EFI_NOT_READY            The EDKII PEI NVM Express Command
> Packet could not be sent because
> +                                   the controller is not ready. The caller may retry again later.
> +  @retval EFI_DEVICE_ERROR         A device error occurred while attempting
> to send the EDKII PEI NVM
> +                                   Express Command Packet.
> +  @retval EFI_INVALID_PARAMETER    Namespace, or the contents of
> EDKII_PEI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET
> +                                   are invalid.
> +                                   The EDKII PEI NVM Express Command Packet was not sent,
> so no
> +                                   additional status information is available.
> +  @retval EFI_UNSUPPORTED          The command described by the EDKII PEI
> NVM Express Command Packet
> +                                   is not supported by the host adapter.
> +                                   The EDKII PEI NVM Express Command Packet was not sent,
> so no
> +                                   additional status information is available.
> +  @retval EFI_TIMEOUT              A timeout occurred while waiting for the
> EDKII PEI NVM Express Command
> +                                   Packet to execute.
> +
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *EDKII_PEI_NVME_PASS_THRU_PASSTHRU) (
> +  IN     EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI               *This,
> +  IN     UINT32                                            NamespaceId,
> +  IN OUT EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET          *Packet
> +  );
> +
> +//
> +// This PPI contains a set of services to send commands
> +// to a mass storage device.
> +//
> +struct _EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI {
> +  UINT64                                           Revision;
> +  EFI_NVM_EXPRESS_PASS_THRU_MODE                   *Mode;
> +  EDKII_PEI_NVME_PASS_THRU_GET_DEVICE_PATH         GetDevicePath;
> +  EDKII_PEI_NVME_PASS_THRU_GET_NEXT_NAMESPACE
> GetNextNameSpace;
> +  EDKII_PEI_NVME_PASS_THRU_PASSTHRU                PassThru;
> +};
> +
> +extern EFI_GUID gEdkiiPeiNvmExpressPassThruPpiGuid;
> +
> +#endif
> diff --git a/MdeModulePkg/MdeModulePkg.dec
> b/MdeModulePkg/MdeModulePkg.dec
> index 6cba729982..8ade6bac0e 100644
> --- a/MdeModulePkg/MdeModulePkg.dec
> +++ b/MdeModulePkg/MdeModulePkg.dec
> @@ -466,6 +466,9 @@
>    ## Include/Ppi/Debug.h
>    gEdkiiDebugPpiGuid                        = { 0x999e699c, 0xb013, 0x475e, { 0xb1,
> 0x7b, 0xf3, 0xa8, 0xae, 0x5c, 0x48, 0x75 } }
> 
> +  ## Include/Ppi/NvmExpressPassThru.h
> +  gEdkiiPeiNvmExpressPassThruPpiGuid    = { 0x6af31b2c, 0x3be, 0x46c1,
> { 0xb1, 0x2d, 0xea, 0x4a, 0x36, 0xdf, 0xa7, 0x4c } }
> +


Reviewed-by: Hao A Wu <hao.a.wu@intel.com>

Best Regards,
Hao Wu


>  [Protocols]
>    ## Load File protocol provides capability to load and unload EFI image into
> memory and execute it.
>    #  Include/Protocol/LoadPe32Image.h
> --
> 2.16.2.windows.1


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#42540): https://edk2.groups.io/g/devel/message/42540
Mute This Topic: https://groups.io/mt/32090298/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [edk2-devel] [PATCH] MdeModulePkg: Add definitions for NVM Express Passthru PPI
Posted by Wu, Hao A 4 years, 9 months ago
> -----Original Message-----
> From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of
> Wu, Hao A
> Sent: Tuesday, June 18, 2019 8:34 PM
> To: Chu, Maggie; devel@edk2.groups.io
> Cc: Wang, Jian J; Ni, Ray; Zeng, Star
> Subject: Re: [edk2-devel] [PATCH] MdeModulePkg: Add definitions for NVM
> Express Passthru PPI
> 
> > -----Original Message-----
> > From: Chu, Maggie
> > Sent: Monday, June 17, 2019 10:11 AM
> > To: devel@edk2.groups.io
> > Cc: Wu, Hao A; Wang, Jian J; Ni, Ray; Zeng, Star
> > Subject: [PATCH] MdeModulePkg: Add definitions for NVM Express
> Passthru
> > PPI
> >
> > https://bugzilla.tianocore.org/show_bug.cgi?id=1879
> > This commit will add the definitions of Nvm Express PassThru PPI.
> > This PPI will provide services that allow NVM commands to be sent
> > to NVM Express devices during PEI phase.
> >
> > More specifically, the PPI will provide services to:
> >
> > * Sends an NVM Express Command Packet to an NVM Express controller
> >   or namespace (by service 'PassThru');
> > * Get the list of the attached namespaces on a controller
> >   (by services 'GetNextNameSpace');
> > * Get the identification information (DevicePath) of the underlying
> >   NVM Express host controller (by service 'GetDevicePath').
> >
> > Signed-off-by: Maggie Chu <maggie.chu@intel.com>
> > Cc: Hao A Wu <hao.a.wu@intel.com>
> > Cc: Jian J Wang <jian.j.wang@intel.com>
> > Cc: Ray Ni <ray.ni@intel.com>
> > Cc: Star Zeng <star.zeng@intel.com>
> > ---
> >  MdeModulePkg/Include/Ppi/NvmExpressPassThru.h | 156
> > ++++++++++++++++++++++++++
> >  MdeModulePkg/MdeModulePkg.dec                 |   3 +
> >  2 files changed, 159 insertions(+)
> >  create mode 100644 MdeModulePkg/Include/Ppi/NvmExpressPassThru.h
> >
> > diff --git a/MdeModulePkg/Include/Ppi/NvmExpressPassThru.h
> > b/MdeModulePkg/Include/Ppi/NvmExpressPassThru.h
> > new file mode 100644
> > index 0000000000..cb5b3b3b18
> > --- /dev/null
> > +++ b/MdeModulePkg/Include/Ppi/NvmExpressPassThru.h
> > @@ -0,0 +1,156 @@
> > +/** @file
> > +
> > +  Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
> > +  SPDX-License-Identifier: BSD-2-Clause-Patent
> > +
> > +**/
> > +
> > +#ifndef _EDKII_NVME_PASS_THRU_PPI_H_
> > +#define _EDKII_NVME_PASS_THRU_PPI_H_
> > +
> > +#include <Protocol/DevicePath.h>
> > +#include <Protocol/NvmExpressPassthru.h>
> > +
> > +///
> > +/// Global ID for the EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI.
> > +///
> > +#define EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI_GUID \
> > +  { \
> > +    0x6af31b2c, 0x3be, 0x46c1, { 0xb1, 0x2d, 0xea, 0x4a, 0x36, 0xdf, 0xa7,
> > 0x4c } \
> > +  }
> > +
> > +//
> > +// Forward declaration for the
> EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI.
> > +//
> > +typedef struct _EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI
> > EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI;
> > +
> > +//
> > +// Revision The revision to which the Nvme Pass Thru PPI interface
> adheres.
> > +//          All future revisions must be backwards compatible.
> > +//          If a future version is not back wards compatible it is not the same
> > GUID.
> > +//
> > +#define EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI_REVISION
> 0x00010000
> > +
> > +/**
> > +  Gets the device path information of the underlying NVM Express host
> > controller.
> > +
> > +  @param[in]  This                 The PPI instance pointer.
> > +  @param[out] DevicePathLength     The length of the device path in bytes
> > specified
> > +                                   by DevicePath.
> > +  @param[out] DevicePath           The device path of the underlying NVM
> > Express
> > +                                   host controller.
> > +                                   This field re-uses EFI Device Path Protocol as
> > +                                   defined by Section 10.2 EFI Device Path Protocol
> > +                                   of UEFI 2.7 Specification.
> > +
> > +  @retval EFI_SUCCESS              The operation succeeds.
> > +  @retval EFI_INVALID_PARAMETER    DevicePathLength or DevicePath is
> > NULL.
> > +  @retval EFI_OUT_OF_RESOURCES     The operation fails due to lack of
> > resources.
> > +
> > +**/
> > +typedef
> > +EFI_STATUS
> > +(EFIAPI *EDKII_PEI_NVME_PASS_THRU_GET_DEVICE_PATH) (
> > +  IN  EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI   *This,
> > +  OUT UINTN                                 *DevicePathLength,
> > +  OUT EFI_DEVICE_PATH_PROTOCOL              **DevicePath
> > +  );
> > +
> > +/**
> > +  Used to retrieve the next namespace ID for this NVM Express controller.
> > +
> > +  If on input the value pointed to by NamespaceId is 0xFFFFFFFF, then the
> > first
> > +  valid namespace ID defined on the NVM Express controller is returned in
> > the
> > +  location pointed to by NamespaceId and a status of EFI_SUCCESS is
> > returned.
> > +
> > +  If on input the value pointed to by NamespaceId is an invalid namespace
> > ID
> > +  other than 0xFFFFFFFF, then EFI_INVALID_PARAMETER is returned.
> > +
> > +  If on input the value pointed to by NamespaceId is a valid namespace ID,
> > then
> > +  the next valid namespace ID on the NVM Express controller is returned
> in
> > the
> > +  location pointed to by NamespaceId, and EFI_SUCCESS is returned.
> > +
> > +  If the value pointed to by NamespaceId is the namespace ID of the last
> > +  namespace on the NVM Express controller, then EFI_NOT_FOUND is
> > returned.
> > +
> > +  @param[in]     This              The PPI instance pointer.
> > +  @param[in,out] NamespaceId       On input, a pointer to a legal
> > NamespaceId
> > +                                   for an NVM Express namespace present on the
> > +                                   NVM Express controller. On output, a pointer
> > +                                   to the next NamespaceId of an NVM Express
> > +                                   namespace on an NVM Express controller. An
> > +                                   input value of 0xFFFFFFFF retrieves the
> > +                                   first NamespaceId for an NVM Express
> > +                                   namespace present on an NVM Express
> > +                                   controller.
> > +
> > +  @retval EFI_SUCCESS            The Namespace ID of the next Namespace
> was
> > +                                 returned.
> > +  @retval EFI_NOT_FOUND          There are no more namespaces defined
> on
> > this
> > +                                 controller.
> > +  @retval EFI_INVALID_PARAMETER  NamespaceId is an invalid value
> other
> > than
> > +                                 0xFFFFFFFF.
> > +
> > +**/
> > +typedef
> > +EFI_STATUS
> > +(EFIAPI *EDKII_PEI_NVME_PASS_THRU_GET_NEXT_NAMESPACE)(
> > +  IN     EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI   *This,
> > +  IN OUT UINT32                                *NamespaceId
> > +  );
> > +
> > +
> > +/**
> > +  Sends an NVM Express Command Packet to an NVM Express controller
> or
> > namespace. This function only
> > +  supports blocking execution of the command.
> > +
> > +  @param[in] This                  The PPI instance pointer.
> > +  @param[in] NamespaceId           Is a 32 bit Namespace ID to which the
> Nvm
> > Express command packet will
> > +                                   be sent.
> > +                                   A Value of 0 denotes the NVM Express controller, a
> Value
> > of all 0FFh in
> > +                                   the namespace ID specifies that the command packet
> > should be sent to all
> > +                                   valid namespaces.
> > +  @param[in,out] Packet            A pointer to the EDKII PEI NVM Express
> > PassThru Command Packet to send
> > +                                   to the NVMe namespace specified by NamespaceId.
> > +
> > +  @retval EFI_SUCCESS              The EDKII PEI NVM Express Command
> Packet
> > was sent by the host.
> > +                                   TransferLength bytes were transferred to, or from
> > DataBuffer.
> > +  @retval EFI_NOT_READY            The EDKII PEI NVM Express Command
> > Packet could not be sent because
> > +                                   the controller is not ready. The caller may retry again
> later.
> > +  @retval EFI_DEVICE_ERROR         A device error occurred while
> attempting
> > to send the EDKII PEI NVM
> > +                                   Express Command Packet.
> > +  @retval EFI_INVALID_PARAMETER    Namespace, or the contents of
> > EDKII_PEI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET
> > +                                   are invalid.
> > +                                   The EDKII PEI NVM Express Command Packet was not
> sent,
> > so no
> > +                                   additional status information is available.
> > +  @retval EFI_UNSUPPORTED          The command described by the EDKII
> PEI
> > NVM Express Command Packet
> > +                                   is not supported by the host adapter.
> > +                                   The EDKII PEI NVM Express Command Packet was not
> sent,
> > so no
> > +                                   additional status information is available.
> > +  @retval EFI_TIMEOUT              A timeout occurred while waiting for the
> > EDKII PEI NVM Express Command
> > +                                   Packet to execute.
> > +
> > +**/
> > +typedef
> > +EFI_STATUS
> > +(EFIAPI *EDKII_PEI_NVME_PASS_THRU_PASSTHRU) (
> > +  IN     EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI               *This,
> > +  IN     UINT32                                            NamespaceId,
> > +  IN OUT EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET
> *Packet
> > +  );
> > +
> > +//
> > +// This PPI contains a set of services to send commands
> > +// to a mass storage device.
> > +//
> > +struct _EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI {
> > +  UINT64                                           Revision;
> > +  EFI_NVM_EXPRESS_PASS_THRU_MODE                   *Mode;
> > +  EDKII_PEI_NVME_PASS_THRU_GET_DEVICE_PATH         GetDevicePath;
> > +  EDKII_PEI_NVME_PASS_THRU_GET_NEXT_NAMESPACE
> > GetNextNameSpace;
> > +  EDKII_PEI_NVME_PASS_THRU_PASSTHRU                PassThru;
> > +};
> > +
> > +extern EFI_GUID gEdkiiPeiNvmExpressPassThruPpiGuid;
> > +
> > +#endif
> > diff --git a/MdeModulePkg/MdeModulePkg.dec
> > b/MdeModulePkg/MdeModulePkg.dec
> > index 6cba729982..8ade6bac0e 100644
> > --- a/MdeModulePkg/MdeModulePkg.dec
> > +++ b/MdeModulePkg/MdeModulePkg.dec
> > @@ -466,6 +466,9 @@
> >    ## Include/Ppi/Debug.h
> >    gEdkiiDebugPpiGuid                        = { 0x999e699c, 0xb013, 0x475e, { 0xb1,
> > 0x7b, 0xf3, 0xa8, 0xae, 0x5c, 0x48, 0x75 } }
> >
> > +  ## Include/Ppi/NvmExpressPassThru.h
> > +  gEdkiiPeiNvmExpressPassThruPpiGuid    = { 0x6af31b2c, 0x3be, 0x46c1,
> > { 0xb1, 0x2d, 0xea, 0x4a, 0x36, 0xdf, 0xa7, 0x4c } }
> > +
> 
> 
> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>


Thanks for the contribution.
Pushed via commit 4128d8a8cb.

Best Regards,
Hao Wu


> 
> Best Regards,
> Hao Wu
> 
> 
> >  [Protocols]
> >    ## Load File protocol provides capability to load and unload EFI image into
> > memory and execute it.
> >    #  Include/Protocol/LoadPe32Image.h
> > --
> > 2.16.2.windows.1
> 
> 
> 


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#42721): https://edk2.groups.io/g/devel/message/42721
Mute This Topic: https://groups.io/mt/32090298/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-