[edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly

Ard Biesheuvel posted 1 patch 5 years, 9 months ago
Failed in applying to current master (apply log)
There is a newer version of this series
BaseTools/Conf/tools_def.template | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
[edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
Posted by Ard Biesheuvel 5 years, 9 months ago
As a security measure, some distros now build their GCC toolchains with
PIE code generation enabled by default, because it is a prerequisite
for ASLR to be enabled when running the executable.

This typically results in slightly larger code, but it also generates
ELF relocations that our tooling cannot deal with, so let's disable it
explicitly when using GCC5 for IA32. (Note that this does not apply to
X64: it uses PIE code deliberately in some cases, and our tooling does
deal with the resuling relocations)

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
 BaseTools/Conf/tools_def.template | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/BaseTools/Conf/tools_def.template b/BaseTools/Conf/tools_def.template
index 7e9c915755ed..ab57f9c706e3 100755
--- a/BaseTools/Conf/tools_def.template
+++ b/BaseTools/Conf/tools_def.template
@@ -4670,7 +4670,7 @@ DEFINE GCC49_AARCH64_DLINK2_FLAGS    = DEF(GCC48_AARCH64_DLINK2_FLAGS)
 DEFINE GCC49_ARM_ASLDLINK_FLAGS      = DEF(GCC48_ARM_ASLDLINK_FLAGS)
 DEFINE GCC49_AARCH64_ASLDLINK_FLAGS  = DEF(GCC48_AARCH64_ASLDLINK_FLAGS)
 
-DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS)
+DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS) -fno-pic -fno-pie
 DEFINE GCC5_X64_CC_FLAGS             = DEF(GCC49_X64_CC_FLAGS)
 DEFINE GCC5_IA32_X64_DLINK_COMMON    = DEF(GCC49_IA32_X64_DLINK_COMMON)
 DEFINE GCC5_IA32_X64_ASLDLINK_FLAGS  = DEF(GCC49_IA32_X64_ASLDLINK_FLAGS)
@@ -5502,9 +5502,9 @@ RELEASE_GCC49_AARCH64_DLINK_FLAGS  = DEF(GCC49_AARCH64_DLINK_FLAGS)
 *_GCC5_IA32_RC_PATH              = DEF(GCC5_IA32_PREFIX)objcopy
 
 *_GCC5_IA32_ASLCC_FLAGS          = DEF(GCC_ASLCC_FLAGS) -m32 -fno-lto
-*_GCC5_IA32_ASLDLINK_FLAGS       = DEF(GCC5_IA32_X64_ASLDLINK_FLAGS) -Wl,-m,elf_i386
+*_GCC5_IA32_ASLDLINK_FLAGS       = DEF(GCC5_IA32_X64_ASLDLINK_FLAGS) -Wl,-m,elf_i386 -no-pie
 *_GCC5_IA32_ASM_FLAGS            = DEF(GCC5_ASM_FLAGS) -m32 -march=i386
-*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS)
+*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS) -no-pie
 *_GCC5_IA32_RC_FLAGS             = DEF(GCC_IA32_RC_FLAGS)
 *_GCC5_IA32_OBJCOPY_FLAGS        =
 *_GCC5_IA32_NASM_FLAGS           = -f elf32
-- 
2.17.1

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
Re: [edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
Posted by Gao, Liming 5 years, 9 months ago
Ard:
  Do you mean the default GCC compiler disables PIC and PIE for IA32 arch? But now, some distribution GCC compiler enables PIC and PIE by default. So, we have to obviously disable PIC and PIE in tools_def.txt. 

Thanks
Liming
>-----Original Message-----
>From: Ard Biesheuvel [mailto:ard.biesheuvel@linaro.org]
>Sent: Monday, June 11, 2018 3:42 PM
>To: edk2-devel@lists.01.org
>Cc: Zhu, Yonghong <yonghong.zhu@intel.com>; Gao, Liming
><liming.gao@intel.com>; lersek@redhat.com; Shi, Steven
><steven.shi@intel.com>; zenith432@users.sourceforge.net; Ard Biesheuvel
><ard.biesheuvel@linaro.org>
>Subject: [PATCH] BaseTools/tools_def IA32: disable PIE code generation
>explicitly
>
>As a security measure, some distros now build their GCC toolchains with
>PIE code generation enabled by default, because it is a prerequisite
>for ASLR to be enabled when running the executable.
>
>This typically results in slightly larger code, but it also generates
>ELF relocations that our tooling cannot deal with, so let's disable it
>explicitly when using GCC5 for IA32. (Note that this does not apply to
>X64: it uses PIE code deliberately in some cases, and our tooling does
>deal with the resuling relocations)
>
>Contributed-under: TianoCore Contribution Agreement 1.1
>Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>---
> BaseTools/Conf/tools_def.template | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
>diff --git a/BaseTools/Conf/tools_def.template
>b/BaseTools/Conf/tools_def.template
>index 7e9c915755ed..ab57f9c706e3 100755
>--- a/BaseTools/Conf/tools_def.template
>+++ b/BaseTools/Conf/tools_def.template
>@@ -4670,7 +4670,7 @@ DEFINE GCC49_AARCH64_DLINK2_FLAGS    =
>DEF(GCC48_AARCH64_DLINK2_FLAGS)
> DEFINE GCC49_ARM_ASLDLINK_FLAGS      =
>DEF(GCC48_ARM_ASLDLINK_FLAGS)
> DEFINE GCC49_AARCH64_ASLDLINK_FLAGS  =
>DEF(GCC48_AARCH64_ASLDLINK_FLAGS)
>
>-DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS)
>+DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS) -fno-pic
>-fno-pie
> DEFINE GCC5_X64_CC_FLAGS             = DEF(GCC49_X64_CC_FLAGS)
> DEFINE GCC5_IA32_X64_DLINK_COMMON    =
>DEF(GCC49_IA32_X64_DLINK_COMMON)
> DEFINE GCC5_IA32_X64_ASLDLINK_FLAGS  =
>DEF(GCC49_IA32_X64_ASLDLINK_FLAGS)
>@@ -5502,9 +5502,9 @@ RELEASE_GCC49_AARCH64_DLINK_FLAGS  =
>DEF(GCC49_AARCH64_DLINK_FLAGS)
> *_GCC5_IA32_RC_PATH              = DEF(GCC5_IA32_PREFIX)objcopy
>
> *_GCC5_IA32_ASLCC_FLAGS          = DEF(GCC_ASLCC_FLAGS) -m32 -fno-lto
>-*_GCC5_IA32_ASLDLINK_FLAGS       = DEF(GCC5_IA32_X64_ASLDLINK_FLAGS)
>-Wl,-m,elf_i386
>+*_GCC5_IA32_ASLDLINK_FLAGS       =
>DEF(GCC5_IA32_X64_ASLDLINK_FLAGS) -Wl,-m,elf_i386 -no-pie
> *_GCC5_IA32_ASM_FLAGS            = DEF(GCC5_ASM_FLAGS) -m32 -
>march=i386
>-*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS)
>+*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS) -no-
>pie
> *_GCC5_IA32_RC_FLAGS             = DEF(GCC_IA32_RC_FLAGS)
> *_GCC5_IA32_OBJCOPY_FLAGS        =
> *_GCC5_IA32_NASM_FLAGS           = -f elf32
>--
>2.17.1

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
Re: [edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
Posted by Ard Biesheuvel 5 years, 9 months ago
On 11 June 2018 at 10:38, Gao, Liming <liming.gao@intel.com> wrote:
> Ard:
>   Do you mean the default GCC compiler disables PIC and PIE for IA32 arch? But now, some distribution GCC compiler enables PIC and PIE by default. So, we have to obviously disable PIC and PIE in tools_def.txt.
>

Yes. On my x86 Ubuntu 18.04 LTS system:

$ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/7/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu
7.3.0-16ubuntu3' --with-bugurl=file:///usr/share/doc/gcc-7/README.Bugs
--enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++
--prefix=/usr --with-gcc-major-version-only
--with-as=/usr/bin/x86_64-linux-gnu-as
--with-ld=/usr/bin/x86_64-linux-gnu-ld --program-suffix=-7
--program-prefix=x86_64-linux-gnu- --enable-shared
--enable-linker-build-id --libexecdir=/usr/lib
--without-included-gettext --enable-threads=posix --libdir=/usr/lib
--enable-nls --with-sysroot=/ --enable-clocale=gnu
--enable-libstdcxx-debug --enable-libstdcxx-time=yes
--with-default-libstdcxx-abi=new --enable-gnu-unique-object
--disable-vtable-verify --enable-libmpx --enable-plugin
--enable-default-pie --with-system-zlib --with-target-system-zlib
--enable-objc-gc=auto --enable-multiarch --disable-werror
--with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32
--enable-multilib --with-tune=generic
--enable-offload-targets=nvptx-none --without-cuda-driver
--enable-checking=release --build=x86_64-linux-gnu
--host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)


Notice the '--enable-default-pie' 4 lines from the bottom.



>>-----Original Message-----
>>From: Ard Biesheuvel [mailto:ard.biesheuvel@linaro.org]
>>Sent: Monday, June 11, 2018 3:42 PM
>>To: edk2-devel@lists.01.org
>>Cc: Zhu, Yonghong <yonghong.zhu@intel.com>; Gao, Liming
>><liming.gao@intel.com>; lersek@redhat.com; Shi, Steven
>><steven.shi@intel.com>; zenith432@users.sourceforge.net; Ard Biesheuvel
>><ard.biesheuvel@linaro.org>
>>Subject: [PATCH] BaseTools/tools_def IA32: disable PIE code generation
>>explicitly
>>
>>As a security measure, some distros now build their GCC toolchains with
>>PIE code generation enabled by default, because it is a prerequisite
>>for ASLR to be enabled when running the executable.
>>
>>This typically results in slightly larger code, but it also generates
>>ELF relocations that our tooling cannot deal with, so let's disable it
>>explicitly when using GCC5 for IA32. (Note that this does not apply to
>>X64: it uses PIE code deliberately in some cases, and our tooling does
>>deal with the resuling relocations)
>>
>>Contributed-under: TianoCore Contribution Agreement 1.1
>>Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>>---
>> BaseTools/Conf/tools_def.template | 6 +++---
>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>
>>diff --git a/BaseTools/Conf/tools_def.template
>>b/BaseTools/Conf/tools_def.template
>>index 7e9c915755ed..ab57f9c706e3 100755
>>--- a/BaseTools/Conf/tools_def.template
>>+++ b/BaseTools/Conf/tools_def.template
>>@@ -4670,7 +4670,7 @@ DEFINE GCC49_AARCH64_DLINK2_FLAGS    =
>>DEF(GCC48_AARCH64_DLINK2_FLAGS)
>> DEFINE GCC49_ARM_ASLDLINK_FLAGS      =
>>DEF(GCC48_ARM_ASLDLINK_FLAGS)
>> DEFINE GCC49_AARCH64_ASLDLINK_FLAGS  =
>>DEF(GCC48_AARCH64_ASLDLINK_FLAGS)
>>
>>-DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS)
>>+DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS) -fno-pic
>>-fno-pie
>> DEFINE GCC5_X64_CC_FLAGS             = DEF(GCC49_X64_CC_FLAGS)
>> DEFINE GCC5_IA32_X64_DLINK_COMMON    =
>>DEF(GCC49_IA32_X64_DLINK_COMMON)
>> DEFINE GCC5_IA32_X64_ASLDLINK_FLAGS  =
>>DEF(GCC49_IA32_X64_ASLDLINK_FLAGS)
>>@@ -5502,9 +5502,9 @@ RELEASE_GCC49_AARCH64_DLINK_FLAGS  =
>>DEF(GCC49_AARCH64_DLINK_FLAGS)
>> *_GCC5_IA32_RC_PATH              = DEF(GCC5_IA32_PREFIX)objcopy
>>
>> *_GCC5_IA32_ASLCC_FLAGS          = DEF(GCC_ASLCC_FLAGS) -m32 -fno-lto
>>-*_GCC5_IA32_ASLDLINK_FLAGS       = DEF(GCC5_IA32_X64_ASLDLINK_FLAGS)
>>-Wl,-m,elf_i386
>>+*_GCC5_IA32_ASLDLINK_FLAGS       =
>>DEF(GCC5_IA32_X64_ASLDLINK_FLAGS) -Wl,-m,elf_i386 -no-pie
>> *_GCC5_IA32_ASM_FLAGS            = DEF(GCC5_ASM_FLAGS) -m32 -
>>march=i386
>>-*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS)
>>+*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS) -no-
>>pie
>> *_GCC5_IA32_RC_FLAGS             = DEF(GCC_IA32_RC_FLAGS)
>> *_GCC5_IA32_OBJCOPY_FLAGS        =
>> *_GCC5_IA32_NASM_FLAGS           = -f elf32
>>--
>>2.17.1
>
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
Re: [edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
Posted by Ard Biesheuvel 5 years, 9 months ago
On 11 June 2018 at 10:52, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
> On 11 June 2018 at 10:38, Gao, Liming <liming.gao@intel.com> wrote:
>> Ard:
>>   Do you mean the default GCC compiler disables PIC and PIE for IA32 arch? But now, some distribution GCC compiler enables PIC and PIE by default. So, we have to obviously disable PIC and PIE in tools_def.txt.
>>
>
> Yes. On my x86 Ubuntu 18.04 LTS system:
>
> $ gcc -v
> Using built-in specs.
> COLLECT_GCC=gcc
> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/7/lto-wrapper
> OFFLOAD_TARGET_NAMES=nvptx-none
> OFFLOAD_TARGET_DEFAULT=1
> Target: x86_64-linux-gnu
> Configured with: ../src/configure -v --with-pkgversion='Ubuntu
> 7.3.0-16ubuntu3' --with-bugurl=file:///usr/share/doc/gcc-7/README.Bugs
> --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++
> --prefix=/usr --with-gcc-major-version-only
> --with-as=/usr/bin/x86_64-linux-gnu-as
> --with-ld=/usr/bin/x86_64-linux-gnu-ld --program-suffix=-7
> --program-prefix=x86_64-linux-gnu- --enable-shared
> --enable-linker-build-id --libexecdir=/usr/lib
> --without-included-gettext --enable-threads=posix --libdir=/usr/lib
> --enable-nls --with-sysroot=/ --enable-clocale=gnu
> --enable-libstdcxx-debug --enable-libstdcxx-time=yes
> --with-default-libstdcxx-abi=new --enable-gnu-unique-object
> --disable-vtable-verify --enable-libmpx --enable-plugin
> --enable-default-pie --with-system-zlib --with-target-system-zlib
> --enable-objc-gc=auto --enable-multiarch --disable-werror
> --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32
> --enable-multilib --with-tune=generic
> --enable-offload-targets=nvptx-none --without-cuda-driver
> --enable-checking=release --build=x86_64-linux-gnu
> --host=x86_64-linux-gnu --target=x86_64-linux-gnu
> Thread model: posix
> gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)
>
>
> Notice the '--enable-default-pie' 4 lines from the bottom.
>

(or 9 lines after the mail was rewrapped by gmail)
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
Re: [edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
Posted by Gao, Liming 5 years, 9 months ago
Ard:
  Is this option required in GCC49 tool chain? Or, this option is only required when lto is enabled?

Thanks
Liming
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Ard Biesheuvel
> Sent: Monday, June 11, 2018 4:53 PM
> To: Gao, Liming <liming.gao@intel.com>
> Cc: edk2-devel@lists.01.org; lersek@redhat.com; zenith432@users.sourceforge.net
> Subject: Re: [edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
> 
> On 11 June 2018 at 10:38, Gao, Liming <liming.gao@intel.com> wrote:
> > Ard:
> >   Do you mean the default GCC compiler disables PIC and PIE for IA32 arch? But now, some distribution GCC compiler enables PIC
> and PIE by default. So, we have to obviously disable PIC and PIE in tools_def.txt.
> >
> 
> Yes. On my x86 Ubuntu 18.04 LTS system:
> 
> $ gcc -v
> Using built-in specs.
> COLLECT_GCC=gcc
> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/7/lto-wrapper
> OFFLOAD_TARGET_NAMES=nvptx-none
> OFFLOAD_TARGET_DEFAULT=1
> Target: x86_64-linux-gnu
> Configured with: ../src/configure -v --with-pkgversion='Ubuntu
> 7.3.0-16ubuntu3' --with-bugurl=file:///usr/share/doc/gcc-7/README.Bugs
> --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++
> --prefix=/usr --with-gcc-major-version-only
> --with-as=/usr/bin/x86_64-linux-gnu-as
> --with-ld=/usr/bin/x86_64-linux-gnu-ld --program-suffix=-7
> --program-prefix=x86_64-linux-gnu- --enable-shared
> --enable-linker-build-id --libexecdir=/usr/lib
> --without-included-gettext --enable-threads=posix --libdir=/usr/lib
> --enable-nls --with-sysroot=/ --enable-clocale=gnu
> --enable-libstdcxx-debug --enable-libstdcxx-time=yes
> --with-default-libstdcxx-abi=new --enable-gnu-unique-object
> --disable-vtable-verify --enable-libmpx --enable-plugin
> --enable-default-pie --with-system-zlib --with-target-system-zlib
> --enable-objc-gc=auto --enable-multiarch --disable-werror
> --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32
> --enable-multilib --with-tune=generic
> --enable-offload-targets=nvptx-none --without-cuda-driver
> --enable-checking=release --build=x86_64-linux-gnu
> --host=x86_64-linux-gnu --target=x86_64-linux-gnu
> Thread model: posix
> gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)
> 
> 
> Notice the '--enable-default-pie' 4 lines from the bottom.
> 
> 
> 
> >>-----Original Message-----
> >>From: Ard Biesheuvel [mailto:ard.biesheuvel@linaro.org]
> >>Sent: Monday, June 11, 2018 3:42 PM
> >>To: edk2-devel@lists.01.org
> >>Cc: Zhu, Yonghong <yonghong.zhu@intel.com>; Gao, Liming
> >><liming.gao@intel.com>; lersek@redhat.com; Shi, Steven
> >><steven.shi@intel.com>; zenith432@users.sourceforge.net; Ard Biesheuvel
> >><ard.biesheuvel@linaro.org>
> >>Subject: [PATCH] BaseTools/tools_def IA32: disable PIE code generation
> >>explicitly
> >>
> >>As a security measure, some distros now build their GCC toolchains with
> >>PIE code generation enabled by default, because it is a prerequisite
> >>for ASLR to be enabled when running the executable.
> >>
> >>This typically results in slightly larger code, but it also generates
> >>ELF relocations that our tooling cannot deal with, so let's disable it
> >>explicitly when using GCC5 for IA32. (Note that this does not apply to
> >>X64: it uses PIE code deliberately in some cases, and our tooling does
> >>deal with the resuling relocations)
> >>
> >>Contributed-under: TianoCore Contribution Agreement 1.1
> >>Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> >>---
> >> BaseTools/Conf/tools_def.template | 6 +++---
> >> 1 file changed, 3 insertions(+), 3 deletions(-)
> >>
> >>diff --git a/BaseTools/Conf/tools_def.template
> >>b/BaseTools/Conf/tools_def.template
> >>index 7e9c915755ed..ab57f9c706e3 100755
> >>--- a/BaseTools/Conf/tools_def.template
> >>+++ b/BaseTools/Conf/tools_def.template
> >>@@ -4670,7 +4670,7 @@ DEFINE GCC49_AARCH64_DLINK2_FLAGS    =
> >>DEF(GCC48_AARCH64_DLINK2_FLAGS)
> >> DEFINE GCC49_ARM_ASLDLINK_FLAGS      =
> >>DEF(GCC48_ARM_ASLDLINK_FLAGS)
> >> DEFINE GCC49_AARCH64_ASLDLINK_FLAGS  =
> >>DEF(GCC48_AARCH64_ASLDLINK_FLAGS)
> >>
> >>-DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS)
> >>+DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS) -fno-pic
> >>-fno-pie
> >> DEFINE GCC5_X64_CC_FLAGS             = DEF(GCC49_X64_CC_FLAGS)
> >> DEFINE GCC5_IA32_X64_DLINK_COMMON    =
> >>DEF(GCC49_IA32_X64_DLINK_COMMON)
> >> DEFINE GCC5_IA32_X64_ASLDLINK_FLAGS  =
> >>DEF(GCC49_IA32_X64_ASLDLINK_FLAGS)
> >>@@ -5502,9 +5502,9 @@ RELEASE_GCC49_AARCH64_DLINK_FLAGS  =
> >>DEF(GCC49_AARCH64_DLINK_FLAGS)
> >> *_GCC5_IA32_RC_PATH              = DEF(GCC5_IA32_PREFIX)objcopy
> >>
> >> *_GCC5_IA32_ASLCC_FLAGS          = DEF(GCC_ASLCC_FLAGS) -m32 -fno-lto
> >>-*_GCC5_IA32_ASLDLINK_FLAGS       = DEF(GCC5_IA32_X64_ASLDLINK_FLAGS)
> >>-Wl,-m,elf_i386
> >>+*_GCC5_IA32_ASLDLINK_FLAGS       =
> >>DEF(GCC5_IA32_X64_ASLDLINK_FLAGS) -Wl,-m,elf_i386 -no-pie
> >> *_GCC5_IA32_ASM_FLAGS            = DEF(GCC5_ASM_FLAGS) -m32 -
> >>march=i386
> >>-*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS)
> >>+*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS) -no-
> >>pie
> >> *_GCC5_IA32_RC_FLAGS             = DEF(GCC_IA32_RC_FLAGS)
> >> *_GCC5_IA32_OBJCOPY_FLAGS        =
> >> *_GCC5_IA32_NASM_FLAGS           = -f elf32
> >>--
> >>2.17.1
> >
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
Re: [edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
Posted by Ard Biesheuvel 5 years, 9 months ago
On 11 June 2018 at 18:00, Gao, Liming <liming.gao@intel.com> wrote:
> Ard:
>   Is this option required in GCC49 tool chain? Or, this option is only required when lto is enabled?
>

It has nothing to do with LTO.

In theory, it could be required for any toolchain that supports -fpic
and or -fpie. However, not all 4.x toolchains support -fpie and so
they don't support -fno-pie either.

Given that the distros only changed this default recently (in the 5.x
timeframe or later), it makes sense to only disable it for GCC5,
although it is safe to disable it for GCC49 as well.

>> -----Original Message-----
>> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Ard Biesheuvel
>> Sent: Monday, June 11, 2018 4:53 PM
>> To: Gao, Liming <liming.gao@intel.com>
>> Cc: edk2-devel@lists.01.org; lersek@redhat.com; zenith432@users.sourceforge.net
>> Subject: Re: [edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
>>
>> On 11 June 2018 at 10:38, Gao, Liming <liming.gao@intel.com> wrote:
>> > Ard:
>> >   Do you mean the default GCC compiler disables PIC and PIE for IA32 arch? But now, some distribution GCC compiler enables PIC
>> and PIE by default. So, we have to obviously disable PIC and PIE in tools_def.txt.
>> >
>>
>> Yes. On my x86 Ubuntu 18.04 LTS system:
>>
>> $ gcc -v
>> Using built-in specs.
>> COLLECT_GCC=gcc
>> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/7/lto-wrapper
>> OFFLOAD_TARGET_NAMES=nvptx-none
>> OFFLOAD_TARGET_DEFAULT=1
>> Target: x86_64-linux-gnu
>> Configured with: ../src/configure -v --with-pkgversion='Ubuntu
>> 7.3.0-16ubuntu3' --with-bugurl=file:///usr/share/doc/gcc-7/README.Bugs
>> --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++
>> --prefix=/usr --with-gcc-major-version-only
>> --with-as=/usr/bin/x86_64-linux-gnu-as
>> --with-ld=/usr/bin/x86_64-linux-gnu-ld --program-suffix=-7
>> --program-prefix=x86_64-linux-gnu- --enable-shared
>> --enable-linker-build-id --libexecdir=/usr/lib
>> --without-included-gettext --enable-threads=posix --libdir=/usr/lib
>> --enable-nls --with-sysroot=/ --enable-clocale=gnu
>> --enable-libstdcxx-debug --enable-libstdcxx-time=yes
>> --with-default-libstdcxx-abi=new --enable-gnu-unique-object
>> --disable-vtable-verify --enable-libmpx --enable-plugin
>> --enable-default-pie --with-system-zlib --with-target-system-zlib
>> --enable-objc-gc=auto --enable-multiarch --disable-werror
>> --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32
>> --enable-multilib --with-tune=generic
>> --enable-offload-targets=nvptx-none --without-cuda-driver
>> --enable-checking=release --build=x86_64-linux-gnu
>> --host=x86_64-linux-gnu --target=x86_64-linux-gnu
>> Thread model: posix
>> gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)
>>
>>
>> Notice the '--enable-default-pie' 4 lines from the bottom.
>>
>>
>>
>> >>-----Original Message-----
>> >>From: Ard Biesheuvel [mailto:ard.biesheuvel@linaro.org]
>> >>Sent: Monday, June 11, 2018 3:42 PM
>> >>To: edk2-devel@lists.01.org
>> >>Cc: Zhu, Yonghong <yonghong.zhu@intel.com>; Gao, Liming
>> >><liming.gao@intel.com>; lersek@redhat.com; Shi, Steven
>> >><steven.shi@intel.com>; zenith432@users.sourceforge.net; Ard Biesheuvel
>> >><ard.biesheuvel@linaro.org>
>> >>Subject: [PATCH] BaseTools/tools_def IA32: disable PIE code generation
>> >>explicitly
>> >>
>> >>As a security measure, some distros now build their GCC toolchains with
>> >>PIE code generation enabled by default, because it is a prerequisite
>> >>for ASLR to be enabled when running the executable.
>> >>
>> >>This typically results in slightly larger code, but it also generates
>> >>ELF relocations that our tooling cannot deal with, so let's disable it
>> >>explicitly when using GCC5 for IA32. (Note that this does not apply to
>> >>X64: it uses PIE code deliberately in some cases, and our tooling does
>> >>deal with the resuling relocations)
>> >>
>> >>Contributed-under: TianoCore Contribution Agreement 1.1
>> >>Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> >>---
>> >> BaseTools/Conf/tools_def.template | 6 +++---
>> >> 1 file changed, 3 insertions(+), 3 deletions(-)
>> >>
>> >>diff --git a/BaseTools/Conf/tools_def.template
>> >>b/BaseTools/Conf/tools_def.template
>> >>index 7e9c915755ed..ab57f9c706e3 100755
>> >>--- a/BaseTools/Conf/tools_def.template
>> >>+++ b/BaseTools/Conf/tools_def.template
>> >>@@ -4670,7 +4670,7 @@ DEFINE GCC49_AARCH64_DLINK2_FLAGS    =
>> >>DEF(GCC48_AARCH64_DLINK2_FLAGS)
>> >> DEFINE GCC49_ARM_ASLDLINK_FLAGS      =
>> >>DEF(GCC48_ARM_ASLDLINK_FLAGS)
>> >> DEFINE GCC49_AARCH64_ASLDLINK_FLAGS  =
>> >>DEF(GCC48_AARCH64_ASLDLINK_FLAGS)
>> >>
>> >>-DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS)
>> >>+DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS) -fno-pic
>> >>-fno-pie
>> >> DEFINE GCC5_X64_CC_FLAGS             = DEF(GCC49_X64_CC_FLAGS)
>> >> DEFINE GCC5_IA32_X64_DLINK_COMMON    =
>> >>DEF(GCC49_IA32_X64_DLINK_COMMON)
>> >> DEFINE GCC5_IA32_X64_ASLDLINK_FLAGS  =
>> >>DEF(GCC49_IA32_X64_ASLDLINK_FLAGS)
>> >>@@ -5502,9 +5502,9 @@ RELEASE_GCC49_AARCH64_DLINK_FLAGS  =
>> >>DEF(GCC49_AARCH64_DLINK_FLAGS)
>> >> *_GCC5_IA32_RC_PATH              = DEF(GCC5_IA32_PREFIX)objcopy
>> >>
>> >> *_GCC5_IA32_ASLCC_FLAGS          = DEF(GCC_ASLCC_FLAGS) -m32 -fno-lto
>> >>-*_GCC5_IA32_ASLDLINK_FLAGS       = DEF(GCC5_IA32_X64_ASLDLINK_FLAGS)
>> >>-Wl,-m,elf_i386
>> >>+*_GCC5_IA32_ASLDLINK_FLAGS       =
>> >>DEF(GCC5_IA32_X64_ASLDLINK_FLAGS) -Wl,-m,elf_i386 -no-pie
>> >> *_GCC5_IA32_ASM_FLAGS            = DEF(GCC5_ASM_FLAGS) -m32 -
>> >>march=i386
>> >>-*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS)
>> >>+*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS) -no-
>> >>pie
>> >> *_GCC5_IA32_RC_FLAGS             = DEF(GCC_IA32_RC_FLAGS)
>> >> *_GCC5_IA32_OBJCOPY_FLAGS        =
>> >> *_GCC5_IA32_NASM_FLAGS           = -f elf32
>> >>--
>> >>2.17.1
>> >
>> _______________________________________________
>> edk2-devel mailing list
>> edk2-devel@lists.01.org
>> https://lists.01.org/mailman/listinfo/edk2-devel
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
Re: [edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
Posted by Gao, Liming 5 years, 9 months ago
Ard:
  GCC49 tool chain can be used by GCC4.9 and above compiler. It provides the GCC setting without LTO. GCC5 tool chain provides GCC setting with LTO. So, I suggest to disable it also in GCC49 tool chain. 

Thanks
Liming
> -----Original Message-----
> From: Ard Biesheuvel [mailto:ard.biesheuvel@linaro.org]
> Sent: Tuesday, June 12, 2018 12:04 AM
> To: Gao, Liming <liming.gao@intel.com>
> Cc: edk2-devel@lists.01.org; lersek@redhat.com; zenith432@users.sourceforge.net
> Subject: Re: [edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
> 
> On 11 June 2018 at 18:00, Gao, Liming <liming.gao@intel.com> wrote:
> > Ard:
> >   Is this option required in GCC49 tool chain? Or, this option is only required when lto is enabled?
> >
> 
> It has nothing to do with LTO.
> 
> In theory, it could be required for any toolchain that supports -fpic
> and or -fpie. However, not all 4.x toolchains support -fpie and so
> they don't support -fno-pie either.
> 
> Given that the distros only changed this default recently (in the 5.x
> timeframe or later), it makes sense to only disable it for GCC5,
> although it is safe to disable it for GCC49 as well.
> 
> >> -----Original Message-----
> >> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Ard Biesheuvel
> >> Sent: Monday, June 11, 2018 4:53 PM
> >> To: Gao, Liming <liming.gao@intel.com>
> >> Cc: edk2-devel@lists.01.org; lersek@redhat.com; zenith432@users.sourceforge.net
> >> Subject: Re: [edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
> >>
> >> On 11 June 2018 at 10:38, Gao, Liming <liming.gao@intel.com> wrote:
> >> > Ard:
> >> >   Do you mean the default GCC compiler disables PIC and PIE for IA32 arch? But now, some distribution GCC compiler enables
> PIC
> >> and PIE by default. So, we have to obviously disable PIC and PIE in tools_def.txt.
> >> >
> >>
> >> Yes. On my x86 Ubuntu 18.04 LTS system:
> >>
> >> $ gcc -v
> >> Using built-in specs.
> >> COLLECT_GCC=gcc
> >> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/7/lto-wrapper
> >> OFFLOAD_TARGET_NAMES=nvptx-none
> >> OFFLOAD_TARGET_DEFAULT=1
> >> Target: x86_64-linux-gnu
> >> Configured with: ../src/configure -v --with-pkgversion='Ubuntu
> >> 7.3.0-16ubuntu3' --with-bugurl=file:///usr/share/doc/gcc-7/README.Bugs
> >> --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++
> >> --prefix=/usr --with-gcc-major-version-only
> >> --with-as=/usr/bin/x86_64-linux-gnu-as
> >> --with-ld=/usr/bin/x86_64-linux-gnu-ld --program-suffix=-7
> >> --program-prefix=x86_64-linux-gnu- --enable-shared
> >> --enable-linker-build-id --libexecdir=/usr/lib
> >> --without-included-gettext --enable-threads=posix --libdir=/usr/lib
> >> --enable-nls --with-sysroot=/ --enable-clocale=gnu
> >> --enable-libstdcxx-debug --enable-libstdcxx-time=yes
> >> --with-default-libstdcxx-abi=new --enable-gnu-unique-object
> >> --disable-vtable-verify --enable-libmpx --enable-plugin
> >> --enable-default-pie --with-system-zlib --with-target-system-zlib
> >> --enable-objc-gc=auto --enable-multiarch --disable-werror
> >> --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32
> >> --enable-multilib --with-tune=generic
> >> --enable-offload-targets=nvptx-none --without-cuda-driver
> >> --enable-checking=release --build=x86_64-linux-gnu
> >> --host=x86_64-linux-gnu --target=x86_64-linux-gnu
> >> Thread model: posix
> >> gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)
> >>
> >>
> >> Notice the '--enable-default-pie' 4 lines from the bottom.
> >>
> >>
> >>
> >> >>-----Original Message-----
> >> >>From: Ard Biesheuvel [mailto:ard.biesheuvel@linaro.org]
> >> >>Sent: Monday, June 11, 2018 3:42 PM
> >> >>To: edk2-devel@lists.01.org
> >> >>Cc: Zhu, Yonghong <yonghong.zhu@intel.com>; Gao, Liming
> >> >><liming.gao@intel.com>; lersek@redhat.com; Shi, Steven
> >> >><steven.shi@intel.com>; zenith432@users.sourceforge.net; Ard Biesheuvel
> >> >><ard.biesheuvel@linaro.org>
> >> >>Subject: [PATCH] BaseTools/tools_def IA32: disable PIE code generation
> >> >>explicitly
> >> >>
> >> >>As a security measure, some distros now build their GCC toolchains with
> >> >>PIE code generation enabled by default, because it is a prerequisite
> >> >>for ASLR to be enabled when running the executable.
> >> >>
> >> >>This typically results in slightly larger code, but it also generates
> >> >>ELF relocations that our tooling cannot deal with, so let's disable it
> >> >>explicitly when using GCC5 for IA32. (Note that this does not apply to
> >> >>X64: it uses PIE code deliberately in some cases, and our tooling does
> >> >>deal with the resuling relocations)
> >> >>
> >> >>Contributed-under: TianoCore Contribution Agreement 1.1
> >> >>Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> >> >>---
> >> >> BaseTools/Conf/tools_def.template | 6 +++---
> >> >> 1 file changed, 3 insertions(+), 3 deletions(-)
> >> >>
> >> >>diff --git a/BaseTools/Conf/tools_def.template
> >> >>b/BaseTools/Conf/tools_def.template
> >> >>index 7e9c915755ed..ab57f9c706e3 100755
> >> >>--- a/BaseTools/Conf/tools_def.template
> >> >>+++ b/BaseTools/Conf/tools_def.template
> >> >>@@ -4670,7 +4670,7 @@ DEFINE GCC49_AARCH64_DLINK2_FLAGS    =
> >> >>DEF(GCC48_AARCH64_DLINK2_FLAGS)
> >> >> DEFINE GCC49_ARM_ASLDLINK_FLAGS      =
> >> >>DEF(GCC48_ARM_ASLDLINK_FLAGS)
> >> >> DEFINE GCC49_AARCH64_ASLDLINK_FLAGS  =
> >> >>DEF(GCC48_AARCH64_ASLDLINK_FLAGS)
> >> >>
> >> >>-DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS)
> >> >>+DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS) -fno-pic
> >> >>-fno-pie
> >> >> DEFINE GCC5_X64_CC_FLAGS             = DEF(GCC49_X64_CC_FLAGS)
> >> >> DEFINE GCC5_IA32_X64_DLINK_COMMON    =
> >> >>DEF(GCC49_IA32_X64_DLINK_COMMON)
> >> >> DEFINE GCC5_IA32_X64_ASLDLINK_FLAGS  =
> >> >>DEF(GCC49_IA32_X64_ASLDLINK_FLAGS)
> >> >>@@ -5502,9 +5502,9 @@ RELEASE_GCC49_AARCH64_DLINK_FLAGS  =
> >> >>DEF(GCC49_AARCH64_DLINK_FLAGS)
> >> >> *_GCC5_IA32_RC_PATH              = DEF(GCC5_IA32_PREFIX)objcopy
> >> >>
> >> >> *_GCC5_IA32_ASLCC_FLAGS          = DEF(GCC_ASLCC_FLAGS) -m32 -fno-lto
> >> >>-*_GCC5_IA32_ASLDLINK_FLAGS       = DEF(GCC5_IA32_X64_ASLDLINK_FLAGS)
> >> >>-Wl,-m,elf_i386
> >> >>+*_GCC5_IA32_ASLDLINK_FLAGS       =
> >> >>DEF(GCC5_IA32_X64_ASLDLINK_FLAGS) -Wl,-m,elf_i386 -no-pie
> >> >> *_GCC5_IA32_ASM_FLAGS            = DEF(GCC5_ASM_FLAGS) -m32 -
> >> >>march=i386
> >> >>-*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS)
> >> >>+*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS) -no-
> >> >>pie
> >> >> *_GCC5_IA32_RC_FLAGS             = DEF(GCC_IA32_RC_FLAGS)
> >> >> *_GCC5_IA32_OBJCOPY_FLAGS        =
> >> >> *_GCC5_IA32_NASM_FLAGS           = -f elf32
> >> >>--
> >> >>2.17.1
> >> >
> >> _______________________________________________
> >> edk2-devel mailing list
> >> edk2-devel@lists.01.org
> >> https://lists.01.org/mailman/listinfo/edk2-devel
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
Re: [edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
Posted by Ard Biesheuvel 5 years, 9 months ago
On 11 June 2018 at 18:09, Gao, Liming <liming.gao@intel.com> wrote:
> Ard:
>   GCC49 tool chain can be used by GCC4.9 and above compiler. It provides the GCC setting without LTO. GCC5 tool chain provides GCC setting with LTO. So, I suggest to disable it also in GCC49 tool chain.
>

OK that works for me.


>> -----Original Message-----
>> From: Ard Biesheuvel [mailto:ard.biesheuvel@linaro.org]
>> Sent: Tuesday, June 12, 2018 12:04 AM
>> To: Gao, Liming <liming.gao@intel.com>
>> Cc: edk2-devel@lists.01.org; lersek@redhat.com; zenith432@users.sourceforge.net
>> Subject: Re: [edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
>>
>> On 11 June 2018 at 18:00, Gao, Liming <liming.gao@intel.com> wrote:
>> > Ard:
>> >   Is this option required in GCC49 tool chain? Or, this option is only required when lto is enabled?
>> >
>>
>> It has nothing to do with LTO.
>>
>> In theory, it could be required for any toolchain that supports -fpic
>> and or -fpie. However, not all 4.x toolchains support -fpie and so
>> they don't support -fno-pie either.
>>
>> Given that the distros only changed this default recently (in the 5.x
>> timeframe or later), it makes sense to only disable it for GCC5,
>> although it is safe to disable it for GCC49 as well.
>>
>> >> -----Original Message-----
>> >> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Ard Biesheuvel
>> >> Sent: Monday, June 11, 2018 4:53 PM
>> >> To: Gao, Liming <liming.gao@intel.com>
>> >> Cc: edk2-devel@lists.01.org; lersek@redhat.com; zenith432@users.sourceforge.net
>> >> Subject: Re: [edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
>> >>
>> >> On 11 June 2018 at 10:38, Gao, Liming <liming.gao@intel.com> wrote:
>> >> > Ard:
>> >> >   Do you mean the default GCC compiler disables PIC and PIE for IA32 arch? But now, some distribution GCC compiler enables
>> PIC
>> >> and PIE by default. So, we have to obviously disable PIC and PIE in tools_def.txt.
>> >> >
>> >>
>> >> Yes. On my x86 Ubuntu 18.04 LTS system:
>> >>
>> >> $ gcc -v
>> >> Using built-in specs.
>> >> COLLECT_GCC=gcc
>> >> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/7/lto-wrapper
>> >> OFFLOAD_TARGET_NAMES=nvptx-none
>> >> OFFLOAD_TARGET_DEFAULT=1
>> >> Target: x86_64-linux-gnu
>> >> Configured with: ../src/configure -v --with-pkgversion='Ubuntu
>> >> 7.3.0-16ubuntu3' --with-bugurl=file:///usr/share/doc/gcc-7/README.Bugs
>> >> --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++
>> >> --prefix=/usr --with-gcc-major-version-only
>> >> --with-as=/usr/bin/x86_64-linux-gnu-as
>> >> --with-ld=/usr/bin/x86_64-linux-gnu-ld --program-suffix=-7
>> >> --program-prefix=x86_64-linux-gnu- --enable-shared
>> >> --enable-linker-build-id --libexecdir=/usr/lib
>> >> --without-included-gettext --enable-threads=posix --libdir=/usr/lib
>> >> --enable-nls --with-sysroot=/ --enable-clocale=gnu
>> >> --enable-libstdcxx-debug --enable-libstdcxx-time=yes
>> >> --with-default-libstdcxx-abi=new --enable-gnu-unique-object
>> >> --disable-vtable-verify --enable-libmpx --enable-plugin
>> >> --enable-default-pie --with-system-zlib --with-target-system-zlib
>> >> --enable-objc-gc=auto --enable-multiarch --disable-werror
>> >> --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32
>> >> --enable-multilib --with-tune=generic
>> >> --enable-offload-targets=nvptx-none --without-cuda-driver
>> >> --enable-checking=release --build=x86_64-linux-gnu
>> >> --host=x86_64-linux-gnu --target=x86_64-linux-gnu
>> >> Thread model: posix
>> >> gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)
>> >>
>> >>
>> >> Notice the '--enable-default-pie' 4 lines from the bottom.
>> >>
>> >>
>> >>
>> >> >>-----Original Message-----
>> >> >>From: Ard Biesheuvel [mailto:ard.biesheuvel@linaro.org]
>> >> >>Sent: Monday, June 11, 2018 3:42 PM
>> >> >>To: edk2-devel@lists.01.org
>> >> >>Cc: Zhu, Yonghong <yonghong.zhu@intel.com>; Gao, Liming
>> >> >><liming.gao@intel.com>; lersek@redhat.com; Shi, Steven
>> >> >><steven.shi@intel.com>; zenith432@users.sourceforge.net; Ard Biesheuvel
>> >> >><ard.biesheuvel@linaro.org>
>> >> >>Subject: [PATCH] BaseTools/tools_def IA32: disable PIE code generation
>> >> >>explicitly
>> >> >>
>> >> >>As a security measure, some distros now build their GCC toolchains with
>> >> >>PIE code generation enabled by default, because it is a prerequisite
>> >> >>for ASLR to be enabled when running the executable.
>> >> >>
>> >> >>This typically results in slightly larger code, but it also generates
>> >> >>ELF relocations that our tooling cannot deal with, so let's disable it
>> >> >>explicitly when using GCC5 for IA32. (Note that this does not apply to
>> >> >>X64: it uses PIE code deliberately in some cases, and our tooling does
>> >> >>deal with the resuling relocations)
>> >> >>
>> >> >>Contributed-under: TianoCore Contribution Agreement 1.1
>> >> >>Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> >> >>---
>> >> >> BaseTools/Conf/tools_def.template | 6 +++---
>> >> >> 1 file changed, 3 insertions(+), 3 deletions(-)
>> >> >>
>> >> >>diff --git a/BaseTools/Conf/tools_def.template
>> >> >>b/BaseTools/Conf/tools_def.template
>> >> >>index 7e9c915755ed..ab57f9c706e3 100755
>> >> >>--- a/BaseTools/Conf/tools_def.template
>> >> >>+++ b/BaseTools/Conf/tools_def.template
>> >> >>@@ -4670,7 +4670,7 @@ DEFINE GCC49_AARCH64_DLINK2_FLAGS    =
>> >> >>DEF(GCC48_AARCH64_DLINK2_FLAGS)
>> >> >> DEFINE GCC49_ARM_ASLDLINK_FLAGS      =
>> >> >>DEF(GCC48_ARM_ASLDLINK_FLAGS)
>> >> >> DEFINE GCC49_AARCH64_ASLDLINK_FLAGS  =
>> >> >>DEF(GCC48_AARCH64_ASLDLINK_FLAGS)
>> >> >>
>> >> >>-DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS)
>> >> >>+DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS) -fno-pic
>> >> >>-fno-pie
>> >> >> DEFINE GCC5_X64_CC_FLAGS             = DEF(GCC49_X64_CC_FLAGS)
>> >> >> DEFINE GCC5_IA32_X64_DLINK_COMMON    =
>> >> >>DEF(GCC49_IA32_X64_DLINK_COMMON)
>> >> >> DEFINE GCC5_IA32_X64_ASLDLINK_FLAGS  =
>> >> >>DEF(GCC49_IA32_X64_ASLDLINK_FLAGS)
>> >> >>@@ -5502,9 +5502,9 @@ RELEASE_GCC49_AARCH64_DLINK_FLAGS  =
>> >> >>DEF(GCC49_AARCH64_DLINK_FLAGS)
>> >> >> *_GCC5_IA32_RC_PATH              = DEF(GCC5_IA32_PREFIX)objcopy
>> >> >>
>> >> >> *_GCC5_IA32_ASLCC_FLAGS          = DEF(GCC_ASLCC_FLAGS) -m32 -fno-lto
>> >> >>-*_GCC5_IA32_ASLDLINK_FLAGS       = DEF(GCC5_IA32_X64_ASLDLINK_FLAGS)
>> >> >>-Wl,-m,elf_i386
>> >> >>+*_GCC5_IA32_ASLDLINK_FLAGS       =
>> >> >>DEF(GCC5_IA32_X64_ASLDLINK_FLAGS) -Wl,-m,elf_i386 -no-pie
>> >> >> *_GCC5_IA32_ASM_FLAGS            = DEF(GCC5_ASM_FLAGS) -m32 -
>> >> >>march=i386
>> >> >>-*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS)
>> >> >>+*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS) -no-
>> >> >>pie
>> >> >> *_GCC5_IA32_RC_FLAGS             = DEF(GCC_IA32_RC_FLAGS)
>> >> >> *_GCC5_IA32_OBJCOPY_FLAGS        =
>> >> >> *_GCC5_IA32_NASM_FLAGS           = -f elf32
>> >> >>--
>> >> >>2.17.1
>> >> >
>> >> _______________________________________________
>> >> edk2-devel mailing list
>> >> edk2-devel@lists.01.org
>> >> https://lists.01.org/mailman/listinfo/edk2-devel
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
Re: [edk2] [PATCH] BaseTools/tools_def IA32: disable PIE code generation explicitly
Posted by Laszlo Ersek 5 years, 9 months ago
On 06/11/18 09:42, Ard Biesheuvel wrote:
> As a security measure, some distros now build their GCC toolchains with
> PIE code generation enabled by default, because it is a prerequisite
> for ASLR to be enabled when running the executable.
> 
> This typically results in slightly larger code, but it also generates
> ELF relocations that our tooling cannot deal with, so let's disable it
> explicitly when using GCC5 for IA32. (Note that this does not apply to
> X64: it uses PIE code deliberately in some cases, and our tooling does
> deal with the resuling relocations)
> 
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
>  BaseTools/Conf/tools_def.template | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/BaseTools/Conf/tools_def.template b/BaseTools/Conf/tools_def.template
> index 7e9c915755ed..ab57f9c706e3 100755
> --- a/BaseTools/Conf/tools_def.template
> +++ b/BaseTools/Conf/tools_def.template
> @@ -4670,7 +4670,7 @@ DEFINE GCC49_AARCH64_DLINK2_FLAGS    = DEF(GCC48_AARCH64_DLINK2_FLAGS)
>  DEFINE GCC49_ARM_ASLDLINK_FLAGS      = DEF(GCC48_ARM_ASLDLINK_FLAGS)
>  DEFINE GCC49_AARCH64_ASLDLINK_FLAGS  = DEF(GCC48_AARCH64_ASLDLINK_FLAGS)
>  
> -DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS)
> +DEFINE GCC5_IA32_CC_FLAGS            = DEF(GCC49_IA32_CC_FLAGS) -fno-pic -fno-pie
>  DEFINE GCC5_X64_CC_FLAGS             = DEF(GCC49_X64_CC_FLAGS)
>  DEFINE GCC5_IA32_X64_DLINK_COMMON    = DEF(GCC49_IA32_X64_DLINK_COMMON)
>  DEFINE GCC5_IA32_X64_ASLDLINK_FLAGS  = DEF(GCC49_IA32_X64_ASLDLINK_FLAGS)
> @@ -5502,9 +5502,9 @@ RELEASE_GCC49_AARCH64_DLINK_FLAGS  = DEF(GCC49_AARCH64_DLINK_FLAGS)
>  *_GCC5_IA32_RC_PATH              = DEF(GCC5_IA32_PREFIX)objcopy
>  
>  *_GCC5_IA32_ASLCC_FLAGS          = DEF(GCC_ASLCC_FLAGS) -m32 -fno-lto
> -*_GCC5_IA32_ASLDLINK_FLAGS       = DEF(GCC5_IA32_X64_ASLDLINK_FLAGS) -Wl,-m,elf_i386
> +*_GCC5_IA32_ASLDLINK_FLAGS       = DEF(GCC5_IA32_X64_ASLDLINK_FLAGS) -Wl,-m,elf_i386 -no-pie
>  *_GCC5_IA32_ASM_FLAGS            = DEF(GCC5_ASM_FLAGS) -m32 -march=i386
> -*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS)
> +*_GCC5_IA32_DLINK2_FLAGS         = DEF(GCC5_IA32_DLINK2_FLAGS) -no-pie
>  *_GCC5_IA32_RC_FLAGS             = DEF(GCC_IA32_RC_FLAGS)
>  *_GCC5_IA32_OBJCOPY_FLAGS        =
>  *_GCC5_IA32_NASM_FLAGS           = -f elf32
> 

Acked-by: Laszlo Ersek <lersek@redhat.com>
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel