From nobody Mon Apr 29 12:02:03 2024 Delivered-To: importer@patchew.org Authentication-Results: mx.zohomail.com; dkim=fail; spf=none (zoho.com: 198.145.21.10 is neither permitted nor denied by domain of lists.01.org) smtp.mailfrom=edk2-devel-bounces@lists.01.org Return-Path: Received: from ml01.01.org (ml01.01.org [198.145.21.10]) by mx.zohomail.com with SMTPS id 1510852348282542.0696260818626; Thu, 16 Nov 2017 09:12:28 -0800 (PST) Received: from [127.0.0.1] (localhost [IPv6:::1]) by ml01.01.org (Postfix) with ESMTP id F08DB2035A7C7; Thu, 16 Nov 2017 09:08:16 -0800 (PST) Received: from mail-wr0-x22e.google.com (mail-wr0-x22e.google.com [IPv6:2a00:1450:400c:c0c::22e]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id C4C2C2035A7A7 for ; Thu, 16 Nov 2017 09:08:15 -0800 (PST) Received: by mail-wr0-x22e.google.com with SMTP id o14so4562565wrf.9 for ; Thu, 16 Nov 2017 09:12:25 -0800 (PST) Received: from localhost.localdomain ([160.167.170.128]) by smtp.gmail.com with ESMTPSA id 90sm2750187wrp.93.2017.11.16.09.12.20 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 16 Nov 2017 09:12:22 -0800 (PST) X-Original-To: edk2-devel@lists.01.org Received-SPF: none (zoho.com: 198.145.21.10 is neither permitted nor denied by domain of lists.01.org) client-ip=198.145.21.10; envelope-from=edk2-devel-bounces@lists.01.org; helo=ml01.01.org; Received-SPF: Pass (sender SPF authorized) identity=mailfrom; client-ip=2a00:1450:400c:c0c::22e; helo=mail-wr0-x22e.google.com; envelope-from=ard.biesheuvel@linaro.org; receiver=edk2-devel@lists.01.org DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id; bh=GXBaDk4zF+hNDkuFrNMGla3DCCgUA/CIvuBzabLPu4s=; b=N/LzqGR8v4qqc5ZpMbU5hPOwRaa6LHkr4k/WNGcn5LdmqKk9CnLotUSwdMqkIaZ7Zw dMV4VQ7JWzm6749Qp1JiXwmdEi9f59t6mvmLVPrtGjSj6IxUgp2wIUzK15N8BEbUOGfJ O+Wqhm43SZ98K67rwEci3pwGaqYFgaA89PeHY= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id; bh=GXBaDk4zF+hNDkuFrNMGla3DCCgUA/CIvuBzabLPu4s=; b=SmxrJfbaYy1+hUdafbpy96En+HbiZmZewDxpah1zEfY0w3VXfwalGFRyLrjPqzIwqY HCn2BTCGpR7jxB/+5fQYhrQCej6ptkYaOfaFani0hmuD1QzdG1pPjzGZ0ISmjXSNv0sN QyDI9FWNUNYxB8d9RQ0yOtDdX5fO6k5PNOZDYWBOU9KzSXoquUv1111/AlidjmQKQ8TZ KcMuHmdYRv6Oj7SsuddYLJlRVB2bvxpPm7SxLoC70E/HgBvZvfncOOdURYWUox246332 PIswXBXpikmkxIX8zX/F2prC4Fx7fwLFHEpfFnCLosRqgO5UCgG2P1aARu9Hq1Yxx6xO nXLA== X-Gm-Message-State: AJaThX5CDDT3OyS4T+N4IbuPs42PbUHLY1dW4ItKZ4QT87/nvOrBwQ39 41yJmqK3PRLqHWH4Wy9wnv9g8owRqi0= X-Google-Smtp-Source: AGs4zMYo73pabi+j0Cn1hg3/ML6VUYyDFI+uWsrzOatvl/ZbEv54LBQvu/a8KkV2FRsVxTH3o4LxwA== X-Received: by 10.223.135.169 with SMTP id b38mr1989368wrb.278.1510852343112; Thu, 16 Nov 2017 09:12:23 -0800 (PST) From: Ard Biesheuvel To: edk2-devel@lists.01.org, leif.lindholm@linaro.org Date: Thu, 16 Nov 2017 17:12:16 +0000 Message-Id: <20171116171216.7566-1-ard.biesheuvel@linaro.org> X-Mailer: git-send-email 2.11.0 Subject: [edk2] [PATCH] ArmPlatformPkg ArmVirtPkg: reorganize PL011 code X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.22 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: lersek@redhat.com, Ard Biesheuvel MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Errors-To: edk2-devel-bounces@lists.01.org Sender: "edk2-devel" X-ZohoMail-DKIM: fail (Header signature does not verify) X-ZohoMail: RDKM_2 RSF_4 Z_629925259 SPT_0 Content-Type: text/plain; charset="utf-8" The PL011 code in ArmPlatformPkg is organized in a weird way: there is a single PL011Uart.h header file under Include/Drivers containing both register definitions and function entry points. The PL011Uart library itself is in Drivers/ but it is actually a library. So let's clean this up: add a new PL011UartLib library class and associated header file containing only the library prototypes, and move the library itself under Library/ using a new GUID, with the register definitions moved into a local header file. Note that we need to retain the old implementation for out of tree platforms, but we can update ArmVirtPkg to switch to the new version right away. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel --- ArmPlatformPkg/ArmPlatformPkg.dec | = 3 + ArmPlatformPkg/Include/Library/PL011UartLib.h | 18= 7 ++++++++ ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c | = 3 +- ArmPlatformPkg/Library/PL011UartLib/PL011Uart.h | 12= 0 +++++ ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.c | 47= 4 ++++++++++++++++++++ ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf | 4= 3 ++ ArmVirtPkg/ArmVirt.dsc.inc | = 2 +- ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c | = 5 +- ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c | = 5 +- 9 files changed, 833 insertions(+), 9 deletions(-) diff --git a/ArmPlatformPkg/ArmPlatformPkg.dec b/ArmPlatformPkg/ArmPlatform= Pkg.dec index 8df7c8adf9f5..84291db6cfec 100644 --- a/ArmPlatformPkg/ArmPlatformPkg.dec +++ b/ArmPlatformPkg/ArmPlatformPkg.dec @@ -31,6 +31,9 @@ [Defines] [Includes.common] Include # Root include for the package =20 +[LibraryClasses] + PL011UartLib|Include/Library/PL011UartLib.h + [Guids.common] gArmPlatformTokenSpaceGuid =3D { 0x9c0aaed4, 0x74c5, 0x4043, { 0xb4, 0= x17, 0xa3, 0x22, 0x38, 0x14, 0xce, 0x76 } } # diff --git a/ArmPlatformPkg/Include/Library/PL011UartLib.h b/ArmPlatformPkg= /Include/Library/PL011UartLib.h new file mode 100644 index 000000000000..9e923a2218d1 --- /dev/null +++ b/ArmPlatformPkg/Include/Library/PL011UartLib.h @@ -0,0 +1,187 @@ +/** @file +* +* Copyright (c) 2011-2016, ARM Limited. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the B= SD License +* which accompanies this distribution. The full text of the license may = be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IM= PLIED. +* +**/ + +#ifndef __PL011_UART_LIB_H__ +#define __PL011_UART_LIB_H__ + +#include + +/** + + Initialise the serial port to the specified settings. + All unspecified settings will be set to the default values. + + @param[in] UartBase The base address of the serial device. + @param[in] UartClkInHz The clock in Hz for the serial device. + Ignored if the PCD PL011UartInteger is n= ot 0 + @param[in out] BaudRate The baud rate of the serial device. If t= he + baud rate is not supported, the speed wi= ll be + reduced to the nearest supported one and= the + variable's value will be updated accordi= ngly. + @param[in out] ReceiveFifoDepth The number of characters the device will + buffer on input. Value of 0 will use the + device's default FIFO depth. + @param[in out] Parity If applicable, this is the EFI_PARITY_TY= PE + that is computed or checked as each char= acter + is transmitted or received. If the device + does not support parity, the value is the + default parity value. + @param[in out] DataBits The number of data bits in each characte= r. + @param[in out] StopBits If applicable, the EFI_STOP_BITS_TYPE nu= mber + of stop bits per character. + If the device does not support stop bits= , the + value is the default stop bit value. + + @retval RETURN_SUCCESS All attributes were set correctly on t= he + serial device. + @retval RETURN_INVALID_PARAMETER One or more of the attributes has an + unsupported value. + +**/ +RETURN_STATUS +EFIAPI +PL011UartInitializePort ( + IN UINTN UartBase, + IN UINT32 UartClkInHz, + IN OUT UINT64 *BaudRate, + IN OUT UINT32 *ReceiveFifoDepth, + IN OUT EFI_PARITY_TYPE *Parity, + IN OUT UINT8 *DataBits, + IN OUT EFI_STOP_BITS_TYPE *StopBits + ); + +/** + + Assert or deassert the control signals on a serial port. + The following control signals are set according their bit settings : + . Request to Send + . Data Terminal Ready + + @param[in] UartBase UART registers base address + @param[in] Control The following bits are taken into account : + . EFI_SERIAL_REQUEST_TO_SEND : assert/deassert the + "Request To Send" control signal if this bit is + equal to one/zero. + . EFI_SERIAL_DATA_TERMINAL_READY : assert/deassert + the "Data Terminal Ready" control signal if this + bit is equal to one/zero. + . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : enable/dis= able + the hardware loopback if this bit is equal to + one/zero. + . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : not suppor= ted. + . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : enable/ + disable the hardware flow control based on CTS (= Clear + To Send) and RTS (Ready To Send) control signals. + + @retval RETURN_SUCCESS The new control bits were set on the device. + @retval RETURN_UNSUPPORTED The device does not support this operation. + +**/ +RETURN_STATUS +EFIAPI +PL011UartSetControl ( + IN UINTN UartBase, + IN UINT32 Control + ); + +/** + + Retrieve the status of the control bits on a serial device. + + @param[in] UartBase UART registers base address + @param[out] Control Status of the control bits on a serial device : + + . EFI_SERIAL_DATA_CLEAR_TO_SEND, + EFI_SERIAL_DATA_SET_READY, + EFI_SERIAL_RING_INDICATE, + EFI_SERIAL_CARRIER_DETECT, + EFI_SERIAL_REQUEST_TO_SEND, + EFI_SERIAL_DATA_TERMINAL_READY + are all related to the DTE (Data Terminal Equip= ment) + and DCE (Data Communication Equipment) modes of + operation of the serial device. + . EFI_SERIAL_INPUT_BUFFER_EMPTY : equal to one if= the + receive buffer is empty, 0 otherwise. + . EFI_SERIAL_OUTPUT_BUFFER_EMPTY : equal to one i= f the + transmit buffer is empty, 0 otherwise. + . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : equal to = one if + the hardware loopback is enabled (the ouput fee= ds the + receive buffer), 0 otherwise. + . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : equal to = one if + a loopback is accomplished by software, 0 other= wise. + . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : equal= to + one if the hardware flow control based on CTS (= Clear + To Send) and RTS (Ready To Send) control signal= s is + enabled, 0 otherwise. + + @retval RETURN_SUCCESS The control bits were read from the serial devic= e. + +**/ +RETURN_STATUS +EFIAPI +PL011UartGetControl ( + IN UINTN UartBase, + OUT UINT32 *Control + ); + +/** + Write data to serial device. + + @param Buffer Point of data buffer which need to be written. + @param NumberOfBytes Number of output bytes which are cached in Buff= er. + + @retval 0 Write data failed. + @retval !0 Actual number of bytes written to serial device. + +**/ +UINTN +EFIAPI +PL011UartWrite ( + IN UINTN UartBase, + IN UINT8 *Buffer, + IN UINTN NumberOfBytes + ); + +/** + Read data from serial device and save the data in buffer. + + @param Buffer Point of data buffer which need to be written. + @param NumberOfBytes Number of output bytes which are cached in Buff= er. + + @retval 0 Read data failed. + @retval !0 Actual number of bytes read from serial device. + +**/ +UINTN +EFIAPI +PL011UartRead ( + IN UINTN UartBase, + OUT UINT8 *Buffer, + IN UINTN NumberOfBytes + ); + +/** + Check to see if any data is available to be read from the debug device. + + @retval TRUE At least one byte of data is available to be read + @retval FALSE No data is available to be read + +**/ +BOOLEAN +EFIAPI +PL011UartPoll ( + IN UINTN UartBase + ); + +#endif diff --git a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c= b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c index 571d0618c379..6aa80631bb8b 100644 --- a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c +++ b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c @@ -19,10 +19,9 @@ =20 #include #include +#include #include =20 -#include - /** Initialise the serial device hardware with default settings. =20 @retval RETURN_SUCCESS The serial device was initialised. diff --git a/ArmPlatformPkg/Library/PL011UartLib/PL011Uart.h b/ArmPlatformP= kg/Library/PL011UartLib/PL011Uart.h new file mode 100644 index 000000000000..0ea3855cf3eb --- /dev/null +++ b/ArmPlatformPkg/Library/PL011UartLib/PL011Uart.h @@ -0,0 +1,120 @@ +/** @file +* +* Copyright (c) 2011-2016, ARM Limited. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the B= SD License +* which accompanies this distribution. The full text of the license may = be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IM= PLIED. +* +**/ + +#ifndef __PL011_UART_H__ +#define __PL011_UART_H__ + +#define PL011_VARIANT_ZTE 1 + +// PL011 Registers +#if FixedPcdGet8 (PL011UartRegOffsetVariant) =3D=3D PL011_VARIANT_ZTE +#define UARTDR 0x004 +#define UARTRSR 0x010 +#define UARTECR 0x010 +#define UARTFR 0x014 +#define UARTIBRD 0x024 +#define UARTFBRD 0x028 +#define UARTLCR_H 0x030 +#define UARTCR 0x034 +#define UARTIFLS 0x038 +#define UARTIMSC 0x040 +#define UARTRIS 0x044 +#define UARTMIS 0x048 +#define UARTICR 0x04c +#define UARTDMACR 0x050 +#else +#define UARTDR 0x000 +#define UARTRSR 0x004 +#define UARTECR 0x004 +#define UARTFR 0x018 +#define UARTILPR 0x020 +#define UARTIBRD 0x024 +#define UARTFBRD 0x028 +#define UARTLCR_H 0x02C +#define UARTCR 0x030 +#define UARTIFLS 0x034 +#define UARTIMSC 0x038 +#define UARTRIS 0x03C +#define UARTMIS 0x040 +#define UARTICR 0x044 +#define UARTDMACR 0x048 +#endif + +#define UARTPID0 0xFE0 +#define UARTPID1 0xFE4 +#define UARTPID2 0xFE8 +#define UARTPID3 0xFEC + +// Data status bits +#define UART_DATA_ERROR_MASK 0x0F00 + +// Status reg bits +#define UART_STATUS_ERROR_MASK 0x0F + +// Flag reg bits +#if FixedPcdGet8 (PL011UartRegOffsetVariant) =3D=3D PL011_VARIANT_ZTE +#define PL011_UARTFR_RI (1 << 0) // Ring indicator +#define PL011_UARTFR_TXFE (1 << 7) // Transmit FIFO empty +#define PL011_UARTFR_RXFF (1 << 6) // Receive FIFO full +#define PL011_UARTFR_TXFF (1 << 5) // Transmit FIFO full +#define PL011_UARTFR_RXFE (1 << 4) // Receive FIFO empty +#define PL011_UARTFR_BUSY (1 << 8) // UART busy +#define PL011_UARTFR_DCD (1 << 2) // Data carrier detect +#define PL011_UARTFR_DSR (1 << 3) // Data set ready +#define PL011_UARTFR_CTS (1 << 1) // Clear to send +#else +#define PL011_UARTFR_RI (1 << 8) // Ring indicator +#define PL011_UARTFR_TXFE (1 << 7) // Transmit FIFO empty +#define PL011_UARTFR_RXFF (1 << 6) // Receive FIFO full +#define PL011_UARTFR_TXFF (1 << 5) // Transmit FIFO full +#define PL011_UARTFR_RXFE (1 << 4) // Receive FIFO empty +#define PL011_UARTFR_BUSY (1 << 3) // UART busy +#define PL011_UARTFR_DCD (1 << 2) // Data carrier detect +#define PL011_UARTFR_DSR (1 << 1) // Data set ready +#define PL011_UARTFR_CTS (1 << 0) // Clear to send +#endif + +// Flag reg bits - alternative names +#define UART_TX_EMPTY_FLAG_MASK PL011_UARTFR_TXFE +#define UART_RX_FULL_FLAG_MASK PL011_UARTFR_RXFF +#define UART_TX_FULL_FLAG_MASK PL011_UARTFR_TXFF +#define UART_RX_EMPTY_FLAG_MASK PL011_UARTFR_RXFE +#define UART_BUSY_FLAG_MASK PL011_UARTFR_BUSY + +// Control reg bits +#define PL011_UARTCR_CTSEN (1 << 15) // CTS hardware flow control e= nable +#define PL011_UARTCR_RTSEN (1 << 14) // RTS hardware flow control e= nable +#define PL011_UARTCR_RTS (1 << 11) // Request to send +#define PL011_UARTCR_DTR (1 << 10) // Data transmit ready. +#define PL011_UARTCR_RXE (1 << 9) // Receive enable +#define PL011_UARTCR_TXE (1 << 8) // Transmit enable +#define PL011_UARTCR_LBE (1 << 7) // Loopback enable +#define PL011_UARTCR_UARTEN (1 << 0) // UART Enable + +// Line Control Register Bits +#define PL011_UARTLCR_H_SPS (1 << 7) // Stick parity select +#define PL011_UARTLCR_H_WLEN_8 (3 << 5) +#define PL011_UARTLCR_H_WLEN_7 (2 << 5) +#define PL011_UARTLCR_H_WLEN_6 (1 << 5) +#define PL011_UARTLCR_H_WLEN_5 (0 << 5) +#define PL011_UARTLCR_H_FEN (1 << 4) // FIFOs Enable +#define PL011_UARTLCR_H_STP2 (1 << 3) // Two stop bits select +#define PL011_UARTLCR_H_EPS (1 << 2) // Even parity select +#define PL011_UARTLCR_H_PEN (1 << 1) // Parity Enable +#define PL011_UARTLCR_H_BRK (1 << 0) // Send break + +#define PL011_UARTPID2_VER(X) (((X) >> 4) & 0xF) +#define PL011_VER_R1P4 0x2 + +#endif diff --git a/ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.c b/ArmPlatfo= rmPkg/Library/PL011UartLib/PL011UartLib.c new file mode 100644 index 000000000000..61a34fda0b83 --- /dev/null +++ b/ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.c @@ -0,0 +1,474 @@ +/** @file + Serial I/O Port library functions with no library constructor/destructor + + Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
+ Copyright (c) 2011 - 2016, ARM Ltd. All rights reserved.
+ + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BS= D License + which accompanies this distribution. The full text of the license may b= e found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + +**/ + +#include + +#include +#include +#include + +#include + +#include "PL011Uart.h" + +#define FRACTION_PART_SIZE_IN_BITS 6 +#define FRACTION_PART_MASK ((1 << FRACTION_PART_SIZE_IN_BITS) - 1) + +// +// EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE is the only +// control bit that is not supported. +// +STATIC CONST UINT32 mInvalidControlBits =3D EFI_SERIAL_SOFTWARE_LOOPBACK_E= NABLE; + +/** + + Initialise the serial port to the specified settings. + The serial port is re-configured only if the specified settings + are different from the current settings. + All unspecified settings will be set to the default values. + + @param UartBase The base address of the serial device. + @param UartClkInHz The clock in Hz for the serial device. + Ignored if the PCD PL011UartInteger is n= ot 0 + @param BaudRate The baud rate of the serial device. If t= he + baud rate is not supported, the speed wi= ll be + reduced to the nearest supported one and= the + variable's value will be updated accordi= ngly. + @param ReceiveFifoDepth The number of characters the device will + buffer on input. Value of 0 will use the + device's default FIFO depth. + @param Parity If applicable, this is the EFI_PARITY_TY= PE + that is computed or checked as each char= acter + is transmitted or received. If the device + does not support parity, the value is the + default parity value. + @param DataBits The number of data bits in each characte= r. + @param StopBits If applicable, the EFI_STOP_BITS_TYPE nu= mber + of stop bits per character. + If the device does not support stop bits= , the + value is the default stop bit value. + + @retval RETURN_SUCCESS All attributes were set correctly on t= he + serial device. + @retval RETURN_INVALID_PARAMETER One or more of the attributes has an + unsupported value. + +**/ +RETURN_STATUS +EFIAPI +PL011UartInitializePort ( + IN UINTN UartBase, + IN UINT32 UartClkInHz, + IN OUT UINT64 *BaudRate, + IN OUT UINT32 *ReceiveFifoDepth, + IN OUT EFI_PARITY_TYPE *Parity, + IN OUT UINT8 *DataBits, + IN OUT EFI_STOP_BITS_TYPE *StopBits + ) +{ + UINT32 LineControl; + UINT32 Divisor; + UINT32 Integer; + UINT32 Fractional; + UINT32 HardwareFifoDepth; + + HardwareFifoDepth =3D (PL011_UARTPID2_VER (MmioRead32 (UartBase + UARTPI= D2)) \ + > PL011_VER_R1P4) \ + ? 32 : 16 ; + // The PL011 supports a buffer of 1, 16 or 32 chars. Therefore we can ac= cept + // 1 char buffer as the minimum FIFO size. Because everything can be rou= nded + // down, there is no maximum FIFO size. + if ((*ReceiveFifoDepth =3D=3D 0) || (*ReceiveFifoDepth >=3D HardwareFifo= Depth)) { + // Enable FIFO + LineControl =3D PL011_UARTLCR_H_FEN; + *ReceiveFifoDepth =3D HardwareFifoDepth; + } else { + // Disable FIFO + LineControl =3D 0; + // Nothing else to do. 1 byte FIFO is default. + *ReceiveFifoDepth =3D 1; + } + + // + // Parity + // + switch (*Parity) { + case DefaultParity: + *Parity =3D NoParity; + case NoParity: + // Nothing to do. Parity is disabled by default. + break; + case EvenParity: + LineControl |=3D (PL011_UARTLCR_H_PEN | PL011_UARTLCR_H_EPS); + break; + case OddParity: + LineControl |=3D PL011_UARTLCR_H_PEN; + break; + case MarkParity: + LineControl |=3D ( PL011_UARTLCR_H_PEN \ + | PL011_UARTLCR_H_SPS \ + | PL011_UARTLCR_H_EPS); + break; + case SpaceParity: + LineControl |=3D (PL011_UARTLCR_H_PEN | PL011_UARTLCR_H_SPS); + break; + default: + return RETURN_INVALID_PARAMETER; + } + + // + // Data Bits + // + switch (*DataBits) { + case 0: + *DataBits =3D 8; + case 8: + LineControl |=3D PL011_UARTLCR_H_WLEN_8; + break; + case 7: + LineControl |=3D PL011_UARTLCR_H_WLEN_7; + break; + case 6: + LineControl |=3D PL011_UARTLCR_H_WLEN_6; + break; + case 5: + LineControl |=3D PL011_UARTLCR_H_WLEN_5; + break; + default: + return RETURN_INVALID_PARAMETER; + } + + // + // Stop Bits + // + switch (*StopBits) { + case DefaultStopBits: + *StopBits =3D OneStopBit; + case OneStopBit: + // Nothing to do. One stop bit is enabled by default. + break; + case TwoStopBits: + LineControl |=3D PL011_UARTLCR_H_STP2; + break; + case OneFiveStopBits: + // Only 1 or 2 stop bits are supported + default: + return RETURN_INVALID_PARAMETER; + } + + // Don't send the LineControl value to the PL011 yet, + // wait until after the Baud Rate setting. + // This ensures we do not mess up the UART settings halfway through + // in the rare case when there is an error with the Baud Rate. + + // + // Baud Rate + // + + // If PL011 Integer value has been defined then always ignore the BAUD r= ate + if (FixedPcdGet32 (PL011UartInteger) !=3D 0) { + Integer =3D FixedPcdGet32 (PL011UartInteger); + Fractional =3D FixedPcdGet32 (PL011UartFractional); + } else { + // If BAUD rate is zero then replace it with the system default value + if (*BaudRate =3D=3D 0) { + *BaudRate =3D FixedPcdGet32 (PcdSerialBaudRate); + if (*BaudRate =3D=3D 0) { + return RETURN_INVALID_PARAMETER; + } + } + if (0 =3D=3D UartClkInHz) { + return RETURN_INVALID_PARAMETER; + } + + Divisor =3D (UartClkInHz * 4) / *BaudRate; + Integer =3D Divisor >> FRACTION_PART_SIZE_IN_BITS; + Fractional =3D Divisor & FRACTION_PART_MASK; + } + + // + // If PL011 is already initialized, check the current settings + // and re-initialize only if the settings are different. + // + if (((MmioRead32 (UartBase + UARTCR) & PL011_UARTCR_UARTEN) !=3D 0) && + (MmioRead32 (UartBase + UARTLCR_H) =3D=3D LineControl) && + (MmioRead32 (UartBase + UARTIBRD) =3D=3D Integer) && + (MmioRead32 (UartBase + UARTFBRD) =3D=3D Fractional)) { + // Nothing to do - already initialized with correct attributes + return RETURN_SUCCESS; + } + + // Wait for the end of transmission + while ((MmioRead32 (UartBase + UARTFR) & PL011_UARTFR_TXFE) =3D=3D 0); + + // Disable UART: "The UARTLCR_H, UARTIBRD, and UARTFBRD registers must n= ot be changed + // when the UART is enabled" + MmioWrite32 (UartBase + UARTCR, 0); + + // Set Baud Rate Registers + MmioWrite32 (UartBase + UARTIBRD, Integer); + MmioWrite32 (UartBase + UARTFBRD, Fractional); + + // No parity, 1 stop, no fifo, 8 data bits + MmioWrite32 (UartBase + UARTLCR_H, LineControl); + + // Clear any pending errors + MmioWrite32 (UartBase + UARTECR, 0); + + // Enable Tx, Rx, and UART overall + MmioWrite32 (UartBase + UARTCR, + PL011_UARTCR_RXE | PL011_UARTCR_TXE | PL011_UARTCR_UARTEN); + + return RETURN_SUCCESS; +} + +/** + + Assert or deassert the control signals on a serial port. + The following control signals are set according their bit settings : + . Request to Send + . Data Terminal Ready + + @param[in] UartBase UART registers base address + @param[in] Control The following bits are taken into account : + . EFI_SERIAL_REQUEST_TO_SEND : assert/deassert the + "Request To Send" control signal if this bit is + equal to one/zero. + . EFI_SERIAL_DATA_TERMINAL_READY : assert/deassert + the "Data Terminal Ready" control signal if this + bit is equal to one/zero. + . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : enable/dis= able + the hardware loopback if this bit is equal to + one/zero. + . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : not suppor= ted. + . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : enable/ + disable the hardware flow control based on CTS (= Clear + To Send) and RTS (Ready To Send) control signals. + + @retval RETURN_SUCCESS The new control bits were set on the device. + @retval RETURN_UNSUPPORTED The device does not support this operation. + +**/ +RETURN_STATUS +EFIAPI +PL011UartSetControl ( + IN UINTN UartBase, + IN UINT32 Control + ) +{ + UINT32 Bits; + + if (Control & (mInvalidControlBits)) { + return RETURN_UNSUPPORTED; + } + + Bits =3D MmioRead32 (UartBase + UARTCR); + + if (Control & EFI_SERIAL_REQUEST_TO_SEND) { + Bits |=3D PL011_UARTCR_RTS; + } else { + Bits &=3D ~PL011_UARTCR_RTS; + } + + if (Control & EFI_SERIAL_DATA_TERMINAL_READY) { + Bits |=3D PL011_UARTCR_DTR; + } else { + Bits &=3D ~PL011_UARTCR_DTR; + } + + if (Control & EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE) { + Bits |=3D PL011_UARTCR_LBE; + } else { + Bits &=3D ~PL011_UARTCR_LBE; + } + + if (Control & EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE) { + Bits |=3D (PL011_UARTCR_CTSEN | PL011_UARTCR_RTSEN); + } else { + Bits &=3D ~(PL011_UARTCR_CTSEN | PL011_UARTCR_RTSEN); + } + + MmioWrite32 (UartBase + UARTCR, Bits); + + return RETURN_SUCCESS; +} + +/** + + Retrieve the status of the control bits on a serial device. + + @param[in] UartBase UART registers base address + @param[out] Control Status of the control bits on a serial device : + + . EFI_SERIAL_DATA_CLEAR_TO_SEND, + EFI_SERIAL_DATA_SET_READY, + EFI_SERIAL_RING_INDICATE, + EFI_SERIAL_CARRIER_DETECT, + EFI_SERIAL_REQUEST_TO_SEND, + EFI_SERIAL_DATA_TERMINAL_READY + are all related to the DTE (Data Terminal Equip= ment) + and DCE (Data Communication Equipment) modes of + operation of the serial device. + . EFI_SERIAL_INPUT_BUFFER_EMPTY : equal to one if= the + receive buffer is empty, 0 otherwise. + . EFI_SERIAL_OUTPUT_BUFFER_EMPTY : equal to one i= f the + transmit buffer is empty, 0 otherwise. + . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : equal to = one if + the hardware loopback is enabled (the ouput fee= ds the + receive buffer), 0 otherwise. + . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : equal to = one if + a loopback is accomplished by software, 0 other= wise. + . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : equal= to + one if the hardware flow control based on CTS (= Clear + To Send) and RTS (Ready To Send) control signal= s is + enabled, 0 otherwise. + + @retval RETURN_SUCCESS The control bits were read from the serial devic= e. + +**/ +RETURN_STATUS +EFIAPI +PL011UartGetControl ( + IN UINTN UartBase, + OUT UINT32 *Control + ) +{ + UINT32 FlagRegister; + UINT32 ControlRegister; + + + FlagRegister =3D MmioRead32 (UartBase + UARTFR); + ControlRegister =3D MmioRead32 (UartBase + UARTCR); + + *Control =3D 0; + + if ((FlagRegister & PL011_UARTFR_CTS) =3D=3D PL011_UARTFR_CTS) { + *Control |=3D EFI_SERIAL_CLEAR_TO_SEND; + } + + if ((FlagRegister & PL011_UARTFR_DSR) =3D=3D PL011_UARTFR_DSR) { + *Control |=3D EFI_SERIAL_DATA_SET_READY; + } + + if ((FlagRegister & PL011_UARTFR_RI) =3D=3D PL011_UARTFR_RI) { + *Control |=3D EFI_SERIAL_RING_INDICATE; + } + + if ((FlagRegister & PL011_UARTFR_DCD) =3D=3D PL011_UARTFR_DCD) { + *Control |=3D EFI_SERIAL_CARRIER_DETECT; + } + + if ((ControlRegister & PL011_UARTCR_RTS) =3D=3D PL011_UARTCR_RTS) { + *Control |=3D EFI_SERIAL_REQUEST_TO_SEND; + } + + if ((ControlRegister & PL011_UARTCR_DTR) =3D=3D PL011_UARTCR_DTR) { + *Control |=3D EFI_SERIAL_DATA_TERMINAL_READY; + } + + if ((FlagRegister & PL011_UARTFR_RXFE) =3D=3D PL011_UARTFR_RXFE) { + *Control |=3D EFI_SERIAL_INPUT_BUFFER_EMPTY; + } + + if ((FlagRegister & PL011_UARTFR_TXFE) =3D=3D PL011_UARTFR_TXFE) { + *Control |=3D EFI_SERIAL_OUTPUT_BUFFER_EMPTY; + } + + if ((ControlRegister & (PL011_UARTCR_CTSEN | PL011_UARTCR_RTSEN)) + =3D=3D (PL011_UARTCR_CTSEN | PL011_UARTCR_RTSEN)) { + *Control |=3D EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE; + } + + if ((ControlRegister & PL011_UARTCR_LBE) =3D=3D PL011_UARTCR_LBE) { + *Control |=3D EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE; + } + + return RETURN_SUCCESS; +} + +/** + Write data to serial device. + + @param Buffer Point of data buffer which need to be written. + @param NumberOfBytes Number of output bytes which are cached in Buff= er. + + @retval 0 Write data failed. + @retval !0 Actual number of bytes written to serial device. + +**/ +UINTN +EFIAPI +PL011UartWrite ( + IN UINTN UartBase, + IN UINT8 *Buffer, + IN UINTN NumberOfBytes + ) +{ + UINT8* CONST Final =3D &Buffer[NumberOfBytes]; + + while (Buffer < Final) { + // Wait until UART able to accept another char + while ((MmioRead32 (UartBase + UARTFR) & UART_TX_FULL_FLAG_MASK)); + + MmioWrite8 (UartBase + UARTDR, *Buffer++); + } + + return NumberOfBytes; +} + +/** + Read data from serial device and save the data in buffer. + + @param Buffer Point of data buffer which need to be written. + @param NumberOfBytes Number of output bytes which are cached in Buff= er. + + @retval 0 Read data failed. + @retval !0 Actual number of bytes read from serial device. + +**/ +UINTN +EFIAPI +PL011UartRead ( + IN UINTN UartBase, + OUT UINT8 *Buffer, + IN UINTN NumberOfBytes + ) +{ + UINTN Count; + + for (Count =3D 0; Count < NumberOfBytes; Count++, Buffer++) { + while ((MmioRead32 (UartBase + UARTFR) & UART_RX_EMPTY_FLAG_MASK) !=3D= 0); + *Buffer =3D MmioRead8 (UartBase + UARTDR); + } + + return NumberOfBytes; +} + +/** + Check to see if any data is available to be read from the debug device. + + @retval TRUE At least one byte of data is available to be read + @retval FALSE No data is available to be read + +**/ +BOOLEAN +EFIAPI +PL011UartPoll ( + IN UINTN UartBase + ) +{ + return ((MmioRead32 (UartBase + UARTFR) & UART_RX_EMPTY_FLAG_MASK) =3D= =3D 0); +} diff --git a/ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf b/ArmPlat= formPkg/Library/PL011UartLib/PL011UartLib.inf new file mode 100644 index 000000000000..4fc974494a33 --- /dev/null +++ b/ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf @@ -0,0 +1,43 @@ +#/** @file +# +# Component description file for PL011Uart module +# +# Copyright (c) 2011-2016, ARM Ltd. All rights reserved.
+# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the B= SD License +# which accompanies this distribution. The full text of the license may = be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IM= PLIED. +# +#**/ + +[Defines] + INF_VERSION =3D 0x00010005 + BASE_NAME =3D PL011UartLib + FILE_GUID =3D 6a2c5714-8910-44f0-861f-804abc18ce39 + MODULE_TYPE =3D BASE + VERSION_STRING =3D 1.0 + LIBRARY_CLASS =3D PL011UartLib + +[Sources.common] + PL011Uart.h + PL011UartLib.c + +[LibraryClasses] + DebugLib + IoLib + +[Packages] + MdePkg/MdePkg.dec + MdeModulePkg/MdeModulePkg.dec + ArmPlatformPkg/ArmPlatformPkg.dec + +[FixedPcd] + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate + + gArmPlatformTokenSpaceGuid.PL011UartInteger + gArmPlatformTokenSpaceGuid.PL011UartFractional + gArmPlatformTokenSpaceGuid.PL011UartRegOffsetVariant diff --git a/ArmVirtPkg/ArmVirt.dsc.inc b/ArmVirtPkg/ArmVirt.dsc.inc index c92a69281ae4..50eb8675d1c0 100644 --- a/ArmVirtPkg/ArmVirt.dsc.inc +++ b/ArmVirtPkg/ArmVirt.dsc.inc @@ -106,7 +106,7 @@ [LibraryClasses.common] RealTimeClockLib|ArmPlatformPkg/Library/PL031RealTimeClockLib/PL031RealT= imeClockLib.inf TimeBaseLib|EmbeddedPkg/Library/TimeBaseLib/TimeBaseLib.inf # ARM PL011 UART Driver - PL011UartLib|ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.inf + PL011UartLib|ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf SerialPortLib|ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPor= tLib.inf =20 # diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPo= rtLib.c b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortL= ib.c index e28750f3b4c4..d9fd0ef98359 100644 --- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c +++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c @@ -16,14 +16,13 @@ =20 **/ =20 -#include +#include =20 #include +#include #include #include =20 -#include - RETURN_STATUS EFIAPI SerialPortInitialize ( diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib= .c b/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c index 05d3547fda91..c161dd6349d3 100644 --- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c +++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c @@ -17,9 +17,10 @@ =20 **/ =20 -#include +#include =20 #include +#include #include #include #include @@ -28,8 +29,6 @@ #include #include =20 -#include - STATIC UINTN mSerialBaseAddress; =20 RETURN_STATUS --=20 2.11.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel