[PATCH v2 0/2] abort hot-plug if pci_hp_add_bridge() fails

Nam Cao posted 2 patches 2 weeks, 1 day ago
There is a newer version of this series
drivers/pci/hotplug/pciehp_pci.c | 6 ++++--
drivers/pci/hotplug/shpchp_pci.c | 6 ++++--
2 files changed, 8 insertions(+), 4 deletions(-)
[PATCH v2 0/2] abort hot-plug if pci_hp_add_bridge() fails
Posted by Nam Cao 2 weeks, 1 day ago
Hi,

When I hot-plug a bridge, but there is no bus number available for its
downstreambus, the kernel crashes.

This can be reproduced with something like:

	qemu-system-x86_64 -machine pc-q35-2.10 \
	 -kernel ../build-pci/arch/x86/boot/bzImage \
	 -drive "file=img,format=raw" \
	 -m 2048 -smp 2 -enable-kvm \
	 -append "console=ttyS0 root=/dev/sda" \
	 -nographic \
	 -device pcie-root-port,bus=pcie.0,id=rp1,slot=1,bus-reserve=0

Note the "bus-reserve=0": no bus number is reserved for hot-plugging a
bridge.

After booting is completed, a PCI bridge can be hot-added with the QEMU
command:
	device_add pcie-pci-bridge,id=br1,bus=rp1

After this command, the kernel crashes (crash log below).

The reason is that, hot-plugging a bridge is done with pci_hp_add_bridge()
and this can fail. However, its returned value is not checked, and the
kernel proceeds despite the bridge was not added correctly. This results
in the crash.

Best regards,
Nam

[   77.763860] pcieport 0000:00:03.0: pciehp: Slot(1): Button press: will power on in 5 sec
[   77.765343] pcieport 0000:00:03.0: pciehp: Slot(1): Card present
[   77.766385] pcieport 0000:00:03.0: pciehp: Slot(1): Link Up
[   78.881224] pci 0000:01:00.0: [1b36:000e] type 01 class 0x060400 PCIe to PCI/PCI-X bridge
[   78.883650] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x000000ff 64bit]
[   78.884849] pci 0000:01:00.0: PCI bridge to [bus 00]
[   78.886433] pci 0000:01:00.0:   bridge window [io  0x0000-0x0fff]
[   78.887541] pci 0000:01:00.0:   bridge window [mem 0x00000000-0x000fffff]
[   78.889479] pci 0000:01:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[   78.892464] pci 0000:01:00.0: No bus number available for hot-added bridge
[   78.893717] pci 0000:01:00.0: BAR 0 [mem 0xfe800000-0xfe8000ff 64bit]: assigned
[   78.895703] pcieport 0000:00:03.0: PCI bridge to [bus 01]
[   78.896708] pcieport 0000:00:03.0:   bridge window [io  0x1000-0x1fff]
[   78.898878] pcieport 0000:00:03.0:   bridge window [mem 0xfe800000-0xfe9fffff]
[   78.900829] pcieport 0000:00:03.0:   bridge window [mem 0xfe000000-0xfe1fffff 64bit pref]
[   78.905378] shpchp 0000:01:00.0: HPC vendor_id 1b36 device_id e ss_vid 0 ss_did 0
[   78.906729] shpchp 0000:01:00.0: enabling device (0000 -> 0002)
[   78.910290] BUG: kernel NULL pointer dereference, address: 00000000000000da
[   78.911539] #PF: supervisor write access in kernel mode
[   78.912484] #PF: error_code(0x0002) - not-present page
[   78.913407] PGD 0 P4D 0
[   78.913871] Oops: 0002 [#1] PREEMPT SMP NOPTI
[   78.914652] CPU: 0 PID: 45 Comm: irq/24-pciehp Not tainted 6.8.6 #31
[   78.915774] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[   78.917395] RIP: 0010:shpc_init+0x3fb/0x9d0
[   78.918162] Code: 8b 48 08 40 80 ff 02 0f 84 15 04 00 00 f7 c2 00 00 00 1f 0f 84 44 02 00 00 b8 04 00 00 00 b9 04 00 0f
[   78.921407] RSP: 0018:ffffc9000018fad8 EFLAGS: 00010246
[   78.922330] RAX: 0000000000000000 RBX: ffff88800459ab00 RCX: 0000000000000000
[   78.923591] RDX: 00000000000000ff RSI: 0000000000000000 RDI: ffffffff83015701
[   78.924845] RBP: ffffc9000018fb20 R08: ffff888003658280 R09: 0000000000000000
[   78.926093] R10: 0000000000000000 R11: ffff888006888780 R12: ffff8880042ff000
[   78.927358] R13: 0000000000000000 R14: 000000007f000d0f R15: 000000000000001f
[   78.928622] FS:  0000000000000000(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[   78.930040] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   78.931056] CR2: 00000000000000da CR3: 000000000471a000 CR4: 00000000000006f0
[   78.932321] Call Trace:
[   78.932770]  <TASK>
[   78.933175]  ? show_regs+0x64/0x70
[   78.933793]  ? __die+0x23/0x70
[   78.934351]  ? page_fault_oops+0x17b/0x460
[   78.935087]  ? search_module_extables+0x18/0x60
[   78.935907]  ? shpc_init+0x3fb/0x9d0
[   78.936548]  ? kernelmode_fixup_or_oops+0x9d/0x120
[   78.937420]  ? __bad_area_nosemaphore+0x16b/0x220
[   78.938272]  ? bad_area_nosemaphore+0x11/0x20
[   78.939068]  ? do_user_addr_fault+0x28c/0x610
[   78.939858]  ? exc_page_fault+0x6e/0x160
[   78.940566]  ? asm_exc_page_fault+0x2b/0x30
[   78.941332]  ? shpc_init+0x3fb/0x9d0
[   78.941976]  ? shpc_init+0x569/0x9d0
[   78.942618]  shpc_probe+0x92/0x390
[   78.943232]  local_pci_probe+0x46/0xa0
[   78.943922]  pci_device_probe+0xb0/0x190
[   78.944491]  really_probe+0xc2/0x2d0
[   78.944996]  ? __pfx___device_attach_driver+0x10/0x10
[   78.945693]  __driver_probe_device+0x73/0x120
[   78.946300]  driver_probe_device+0x1f/0xf0
[   78.946869]  __device_attach_driver+0x8d/0x120
[   78.947489]  bus_for_each_drv+0x96/0xf0
[   78.948031]  __device_attach+0xae/0x1a0
[   78.948571]  device_attach+0xf/0x20
[   78.949062]  pci_bus_add_device+0x58/0x90
[   78.949628]  pci_bus_add_devices+0x30/0x70
[   78.950201]  pciehp_configure_device+0xa8/0x150
[   78.950840]  pciehp_handle_presence_or_link_change+0x161/0x4a0
[   78.951655]  pciehp_ist+0x20f/0x240
[   78.952144]  ? __pfx_irq_thread_fn+0x10/0x10
[   78.952744]  irq_thread_fn+0x23/0x60
[   78.953245]  irq_thread+0xfa/0x1c0
[   78.953726]  ? __pfx_irq_thread_dtor+0x10/0x10
[   78.954346]  ? __pfx_irq_thread+0x10/0x10
[   78.955175]  kthread+0xe0/0x110
[   78.955631]  ? __pfx_kthread+0x10/0x10
[   78.956160]  ret_from_fork+0x3c/0x60
[   78.956661]  ? __pfx_kthread+0x10/0x10
[   78.957207]  ret_from_fork_asm+0x1b/0x30
[   78.957754]  </TASK>
[   78.958070] Modules linked in:
[   78.958501] CR2: 00000000000000da
[   78.958970] ---[ end trace 0000000000000000 ]---
[   78.959615] RIP: 0010:shpc_init+0x3fb/0x9d0
[   78.960201] Code: 8b 48 08 40 80 ff 02 0f 84 15 04 00 00 f7 c2 00 00 00 1f 0f 84 44 02 00 00 b8 04 00 00 00 b9 04 00 0f
[   78.962745] RSP: 0018:ffffc9000018fad8 EFLAGS: 00010246
[   78.963462] RAX: 0000000000000000 RBX: ffff88800459ab00 RCX: 0000000000000000
[   78.964441] RDX: 00000000000000ff RSI: 0000000000000000 RDI: ffffffff83015701
[   78.965469] RBP: ffffc9000018fb20 R08: ffff888003658280 R09: 0000000000000000
[   78.966537] R10: 0000000000000000 R11: ffff888006888780 R12: ffff8880042ff000
[   78.967531] R13: 0000000000000000 R14: 000000007f000d0f R15: 000000000000001f
[   78.968539] FS:  0000000000000000(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[   78.969662] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   78.970472] CR2: 00000000000000da CR3: 000000000471a000 CR4: 00000000000006f0
[   78.971449] note: irq/24-pciehp[45] exited with irqs disabled
[   78.972281] BUG: kernel NULL pointer dereference, address: 0000000000000000
[   78.973232] #PF: supervisor instruction fetch in kernel mode
[   78.974012] #PF: error_code(0x0010) - not-present page
[   78.974717] PGD 0 P4D 0
[   78.975075] Oops: 0010 [#2] PREEMPT SMP NOPTI
[   78.975686] CPU: 0 PID: 45 Comm: irq/24-pciehp Tainted: G      D            6.8.6 #31
[   78.976751] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[   78.978011] RIP: 0010:0x0
[   78.978383] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[   78.979274] RSP: 0018:ffffc9000018fe98 EFLAGS: 00010286
[   78.979996] RAX: 0000000000000000 RBX: ffff888003d2c740 RCX: 00000000000001c0
[   78.980973] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffc9000018fea0
[   78.981949] RBP: ffffc9000018feb8 R08: 0000000000009ffb R09: 00000000ffffdfff
[   78.982924] R10: 0000000000000001 R11: ffffffff82a58aa0 R12: ffff888003d2c740
[   78.983901] R13: ffff888003d2cf54 R14: ffff888003e78001 R15: 0000000000000000
[   78.984884] FS:  0000000000000000(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[   78.985992] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   78.986786] CR2: ffffffffffffffd6 CR3: 000000000471a000 CR4: 00000000000006f0
[   78.987793] Call Trace:
[   78.988143]  <TASK>
[   78.988443]  ? show_regs+0x64/0x70
[   78.988924]  ? __die+0x23/0x70
[   78.989355]  ? page_fault_oops+0x17b/0x460
[   78.989925]  ? do_user_addr_fault+0x2d1/0x610
[   78.990539]  ? _prb_read_valid+0x2e6/0x370
[   78.991132]  ? exc_page_fault+0x6e/0x160
[   78.991688]  ? asm_exc_page_fault+0x2b/0x30
[   78.992318]  task_work_run+0x60/0x90
[   78.992798]  do_exit+0x355/0xb00
[   78.993234]  make_task_dead+0x7e/0x160
[   78.993708]  rewind_stack_and_make_dead+0x17/0x20
[   78.994303]  </TASK>
[   78.994589] Modules linked in:
[   78.994984] CR2: 0000000000000000
[   78.995408] ---[ end trace 0000000000000000 ]---
[   78.995984] RIP: 0010:shpc_init+0x3fb/0x9d0
[   78.996503] Code: 8b 48 08 40 80 ff 02 0f 84 15 04 00 00 f7 c2 00 00 00 1f 0f 84 44 02 00 00 b8 04 00 00 00 b9 04 00 0f
[   78.998828] RSP: 0018:ffffc9000018fad8 EFLAGS: 00010246
[   78.999500] RAX: 0000000000000000 RBX: ffff88800459ab00 RCX: 0000000000000000
[   79.000406] RDX: 00000000000000ff RSI: 0000000000000000 RDI: ffffffff83015701
[   79.001282] RBP: ffffc9000018fb20 R08: ffff888003658280 R09: 0000000000000000
[   79.002159] R10: 0000000000000000 R11: ffff888006888780 R12: ffff8880042ff000
[   79.003036] R13: 0000000000000000 R14: 000000007f000d0f R15: 000000000000001f
[   79.003926] FS:  0000000000000000(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[   79.004921] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   79.005637] CR2: ffffffffffffffd6 CR3: 000000000471a000 CR4: 00000000000006f0
[   79.006523] note: irq/24-pciehp[45] exited with irqs disabled
[   79.007261] Fixing recursive fault but reboot is needed!
[   79.007942] BUG: scheduling while atomic: irq/24-pciehp/45/0x00000000
[   79.008740] Modules linked in:
[   79.009151] CPU: 0 PID: 45 Comm: irq/24-pciehp Tainted: G      D            6.8.6 #31
[   79.010117] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[   79.011255] Call Trace:
[   79.011573]  <TASK>
[   79.011845]  dump_stack_lvl+0x5f/0x80
[   79.012310]  dump_stack+0x14/0x20
[   79.012730]  __schedule_bug+0x51/0x70
[   79.013195]  __schedule+0x79c/0x890
[   79.013634]  ? vprintk+0x31/0x40
[   79.014044]  ? _printk+0x5f/0x80
[   79.014456]  do_task_dead+0x43/0x50
[   79.014897]  make_task_dead+0x142/0x160
[   79.015378]  rewind_stack_and_make_dead+0x17/0x20
[   79.015971]  </TASK>

Nam Cao (2):
  PCI: shpchp: Abort hot-plug if pci_hp_add_bridge() fails
  PCI: pciehp: Abort hot-plug if pci_hp_add_bridge() fails

 drivers/pci/hotplug/pciehp_pci.c | 6 ++++--
 drivers/pci/hotplug/shpchp_pci.c | 6 ++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

-- 
2.39.2