[PATCH 0/9] iio: pressure: bmp280: Add triggered buffer support and

Vasileios Amoiridis posted 9 patches 1 week, 4 days ago
There is a newer version of this series
drivers/iio/pressure/Kconfig       |    2 +
drivers/iio/pressure/bmp280-core.c | 1130 ++++++++++++++++++++--------
drivers/iio/pressure/bmp280-spi.c  |    8 +-
drivers/iio/pressure/bmp280.h      |   34 +-
4 files changed, 844 insertions(+), 330 deletions(-)
[PATCH 0/9] iio: pressure: bmp280: Add triggered buffer support and
Posted by Vasileios Amoiridis 1 week, 4 days ago
Based on upstream master with the previous patches of this series applied
as well.

IMPORTANT NOTE: There is a fix queued up for this driver here [1]. It is going
to conflict with PATCH [7-9/9]. The previous patches should be fine. The
solution should be quite trivial with minor changes in all 3 PATCH [7-9/9].
When it is deemed necessary I can resubmit the patches or help with resolving
the issue.

Changes in v6:

PATCH [1-3/9]: new:
	- split of PATCH [5/10] of v5 according to proposal here [2].

PATCH [4/9]: new:
	- split of PATCH [6/10] of v5 according to proposal here [3].

PATCH [6/9]:
	- Removed mutex_lock() and added guard(mutex) to
	  bmp580_nvmem_{read/write}() functions as well.

PATCH [9/9]:
	- In the buffer handlers, add 'goto out;' instead of just returning the
	  error because iio_trigger_notify_done() wouldn't be called in case of
	  error.

[1]: https://lore.kernel.org/linux-iio/043f2be49df3c11152aaf32fc5467ed43fd59faa.camel@gmail.com/
[2]: https://lore.kernel.org/linux-iio/20240505200818.1e70c664@jic23-huawei/
[3]: https://lore.kernel.org/linux-iio/20240505202106.1c780044@jic23-huawei/

Vasileios Amoiridis (9):
  iio: pressure: bmp280: Remove dead error checks
  iio: pressure: bmp280: Remove, add and update error messages
  iio: pressure: bmp280: Make error checks consistent
  iio: pressure: bmp280: Use unsigned data types for raw sensor data
  iio: pressure: bmp280: Refactorize reading functions
  iio: pressure: bmp280: Introduce new cleanup routines
  iio: pressure: bmp280: Generalize read_{temp,press,humid}() functions
  iio: pressure: bmp280: Add SCALE, RAW values in channels and
    refactorize them
  iio: pressure: bmp280: Add triggered buffer support

 drivers/iio/pressure/Kconfig       |    2 +
 drivers/iio/pressure/bmp280-core.c | 1130 ++++++++++++++++++++--------
 drivers/iio/pressure/bmp280-spi.c  |    8 +-
 drivers/iio/pressure/bmp280.h      |   34 +-
 4 files changed, 844 insertions(+), 330 deletions(-)


base-commit: dccb07f2914cdab2ac3a5b6c98406f765acab803
-- 
2.25.1
Re: [PATCH 0/9] iio: pressure: bmp280: Add triggered buffer support and
Posted by Vasileios Amoiridis 1 week, 4 days ago
On Wed, May 08, 2024 at 06:34:16PM +0200, Vasileios Amoiridis wrote:
> Based on upstream master with the previous patches of this series applied
> as well.
> 
> IMPORTANT NOTE: There is a fix queued up for this driver here [1]. It is going
> to conflict with PATCH [7-9/9]. The previous patches should be fine. The
> solution should be quite trivial with minor changes in all 3 PATCH [7-9/9].
> When it is deemed necessary I can resubmit the patches or help with resolving
> the issue.
> 
> Changes in v6:
> 
> PATCH [1-3/9]: new:
> 	- split of PATCH [5/10] of v5 according to proposal here [2].
> 
> PATCH [4/9]: new:
> 	- split of PATCH [6/10] of v5 according to proposal here [3].
> 
> PATCH [6/9]:
> 	- Removed mutex_lock() and added guard(mutex) to
> 	  bmp580_nvmem_{read/write}() functions as well.
> 
> PATCH [9/9]:
> 	- In the buffer handlers, add 'goto out;' instead of just returning the
> 	  error because iio_trigger_notify_done() wouldn't be called in case of
> 	  error.
> 
> [1]: https://lore.kernel.org/linux-iio/043f2be49df3c11152aaf32fc5467ed43fd59faa.camel@gmail.com/
> [2]: https://lore.kernel.org/linux-iio/20240505200818.1e70c664@jic23-huawei/
> [3]: https://lore.kernel.org/linux-iio/20240505202106.1c780044@jic23-huawei/
> 
> Vasileios Amoiridis (9):
>   iio: pressure: bmp280: Remove dead error checks
>   iio: pressure: bmp280: Remove, add and update error messages
>   iio: pressure: bmp280: Make error checks consistent
>   iio: pressure: bmp280: Use unsigned data types for raw sensor data
>   iio: pressure: bmp280: Refactorize reading functions
>   iio: pressure: bmp280: Introduce new cleanup routines
>   iio: pressure: bmp280: Generalize read_{temp,press,humid}() functions
>   iio: pressure: bmp280: Add SCALE, RAW values in channels and
>     refactorize them
>   iio: pressure: bmp280: Add triggered buffer support
> 
>  drivers/iio/pressure/Kconfig       |    2 +
>  drivers/iio/pressure/bmp280-core.c | 1130 ++++++++++++++++++++--------
>  drivers/iio/pressure/bmp280-spi.c  |    8 +-
>  drivers/iio/pressure/bmp280.h      |   34 +-
>  4 files changed, 844 insertions(+), 330 deletions(-)
> 
> 
> base-commit: dccb07f2914cdab2ac3a5b6c98406f765acab803
> -- 
> 2.25.1
> 

I messed up with the versioning before, please don't comment here if 
possible. The correct thread is the following:

https://lore.kernel.org/linux-iio/20240508165207.145554-1-vassilisamir@gmail.com/T/#t

Sorry for the mess up.

Cheers,
Vasilis