Google Chameleon v3 is a testing device capable of emulating multiple
DisplayPort monitors, used for testing purposes. It is based on an Arria
10 SoCFPGA. This patchset adds V4L2 drivers for two IP blocks used in the
device's FPGA: the Chameleon v3 video interface, and the Intel DisplayPort
RX IP. The former is a video capture device that takes video signal and
writes frames into memory, which can be later processed by userspace.
The latter is a DisplayPort receiver IP from Intel, its datasheet can
be found at:
https://www.intel.com/programmable/technical-pdfs/683273.pdf
The video interface driver is a regular v4l2 capture device driver, while
the DP RX driver is a v4l2 subdevice driver. In order to avoid code
duplication, some parts of the DisplayPort code from the DRM subsystem
were put into headers usable by the DP RX driver.
This patchset depends on changes merged into the linux-media tree at:
git://linuxtv.org/hverkuil/media_tree.git tags/br-v6.10d
Here is the output of `v4l2-compliance -s` run on a Chameleon v3 for
/dev/video0 (no attached subdevice):
```
v4l2-compliance 1.27.0-5204, 32 bits, 32-bit time_t
v4l2-compliance SHA: dd049328e528 2024-04-29 13:40:09
Compliance test for chv3-video device /dev/video0:
Driver Info:
Driver name : chv3-video
Card type : Chameleon v3 video
Bus info : platform:c0060500.video
Driver version : 6.9.0
Capabilities : 0x84200001
Video Capture
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04200001
Video Capture
Streaming
Extended Pix Format
Required ioctls:
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
test VIDIOC_DV_TIMINGS_CAP: OK
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls (Input 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 2 Private Controls: 0
Format ioctls (Input 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls (Input 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls (Input 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test CREATE_BUFS maximum buffers: OK
test VIDIOC_REMOVE_BUFS: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
test TIME32/64: OK
Test input 0:
Streaming ioctls:
test read/write: OK (Not Supported)
test blocking wait: OK
test MMAP (no poll): OK
test MMAP (select): OK
test MMAP (epoll): OK
test USERPTR (no poll): OK (Not Supported)
test USERPTR (select): OK (Not Supported)
test DMABUF: Cannot test, specify --expbuf-device
Total for chv3-video device /dev/video0: 55, Succeeded: 55, Failed: 0, Warnings: 0
```
Here is the output of `v4l2-compliance -s` run on a Chameleon v3 for
/dev/video4 (attached subdevice):
```
v4l2-compliance 1.27.0-5204, 32 bits, 32-bit time_t
v4l2-compliance SHA: dd049328e528 2024-04-29 13:40:09
Compliance test for chv3-video device /dev/video4:
Driver Info:
Driver name : chv3-video
Card type : Chameleon v3 video
Bus info : platform:c0060600.video
Driver version : 6.9.0
Capabilities : 0x84200001
Video Capture
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04200001
Video Capture
Streaming
Extended Pix Format
Required ioctls:
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video4 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
test VIDIOC_DV_TIMINGS_CAP: OK
test VIDIOC_G/S_EDID: OK
Control ioctls (Input 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 2 Private Controls: 0
Format ioctls (Input 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls (Input 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls (Input 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test CREATE_BUFS maximum buffers: OK
test VIDIOC_REMOVE_BUFS: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
test TIME32/64: OK
Test input 0:
Streaming ioctls:
test read/write: OK (Not Supported)
test blocking wait: OK
test MMAP (no poll): OK
test MMAP (select): OK
test MMAP (epoll): OK
test USERPTR (no poll): OK (Not Supported)
test USERPTR (select): OK (Not Supported)
test DMABUF: Cannot test, specify --expbuf-device
Total for chv3-video device /dev/video4: 55, Succeeded: 55, Failed: 0, Warnings: 0
```
v3 changes:
- Send v4l2-subdev API changes as a separate patchset
- Drop chameleonv3/ directory
- Change capture device name from "framebuffer" to "video interface"
- Set sensible min and max dv timing caps
- Set pixelclock to htotal * vtotal * 24Hz (we can't detect the actual value)
- Remove enum_framesizes
- Use v4l2_match_dv_timings()
- Add V4L2_CID_DV_RX_POWER_PRESENT control
- Use V4L2_DV_BT_CEA_1920X1080P60 as default timing
- Use vb2_video_unregister_device()
- Move subdev pad initialization to probe
- Change subdev entity function to MEDIA_ENT_F_DV_DECODER
- Drop dprx 'port' property and always use 'ports' instead
- Remove legacy-format property and use multiple compats
- Cleanup notifier only in non-fallback mode
- Cleanup subdev entity using media_entity_cleanup()
- Increase HPD pulse length to 500ms (see comment in dprx_set_edid())
- Pull HPD low before updating EDID
- Add a DisplayPort media bus type
- Move receiver properties to port endpoint (data-lanes, link-frequencies)
v2 changes:
- Add missing includes in dt binding examples
- Add version number to intel,dprx compatible
- Use generic node names in dts
- Add and document IP configuration parameters
- Remove IRQ registers from intel-dprx (they're not a part of the IP)
- Remove no-endpoint property and check for "port" node instead
Paweł Anikiel (10):
media: Add Chameleon v3 video interface driver
drm/dp_mst: Move DRM-independent structures to separate header
lib: Move DisplayPort CRC functions to common lib
drm/display: Add mask definitions for DP_PAYLOAD_ALLOCATE_* registers
media: dt-bindings: video-interfaces: Support DisplayPort MST
media: v4l2-mediabus: Add support for DisplayPort media bus
media: intel: Add Displayport RX IP driver
media: dt-bindings: Add Chameleon v3 video interface
media: dt-bindings: Add Intel Displayport RX IP
ARM: dts: chameleonv3: Add video device nodes
.../bindings/media/google,chv3-video.yaml | 64 +
.../devicetree/bindings/media/intel,dprx.yaml | 172 ++
.../bindings/media/video-interfaces.yaml | 7 +
.../socfpga/socfpga_arria10_chameleonv3.dts | 194 ++
drivers/gpu/drm/display/Kconfig | 1 +
drivers/gpu/drm/display/drm_dp_mst_topology.c | 76 +-
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/Makefile | 1 +
drivers/media/platform/google/Kconfig | 13 +
drivers/media/platform/google/Makefile | 3 +
drivers/media/platform/google/chv3-video.c | 891 +++++++
drivers/media/platform/intel/Kconfig | 12 +
drivers/media/platform/intel/Makefile | 1 +
drivers/media/platform/intel/intel-dprx.c | 2283 +++++++++++++++++
drivers/media/v4l2-core/v4l2-fwnode.c | 38 +
include/drm/display/drm_dp.h | 9 +-
include/drm/display/drm_dp_mst.h | 238 ++
include/drm/display/drm_dp_mst_helper.h | 232 +-
include/dt-bindings/media/video-interfaces.h | 2 +
include/linux/crc-dp.h | 10 +
include/media/v4l2-fwnode.h | 5 +
include/media/v4l2-mediabus.h | 17 +
lib/Kconfig | 8 +
lib/Makefile | 1 +
lib/crc-dp.c | 78 +
25 files changed, 4053 insertions(+), 304 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/google,chv3-video.yaml
create mode 100644 Documentation/devicetree/bindings/media/intel,dprx.yaml
create mode 100644 drivers/media/platform/google/Kconfig
create mode 100644 drivers/media/platform/google/Makefile
create mode 100644 drivers/media/platform/google/chv3-video.c
create mode 100644 drivers/media/platform/intel/intel-dprx.c
create mode 100644 include/drm/display/drm_dp_mst.h
create mode 100644 include/linux/crc-dp.h
create mode 100644 lib/crc-dp.c
--
2.45.0.rc1.225.g2a3ae87e7f-goog