Commits

  d6bdb85eb0 virtio-scsi: skip initializing non-bootable devices
  f82e82a5ab2 virtio-mmio: add support for scsi devices.

both use the lun value from tmpl_drv, which is always 0, instead of the
correct one passed as a separate parameter. This causes systems where
LUNs other than 0 are set as bootable, but 0 is not, to not boot.

Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
---

v2:
* sep*a*rate :)
* collect Paul's R-b

 src/hw/virtio-scsi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/src/hw/virtio-scsi.c b/src/hw/virtio-scsi.c
index 59f1c65..369c981 100644
--- a/src/hw/virtio-scsi.c
+++ b/src/hw/virtio-scsi.c
@@ -126,14 +126,14 @@ virtio_scsi_add_lun(u32 lun, struct drive_s *tmpl_drv)
     int prio = -1;
 
     if (tmpl_vlun->pci)
-        prio = bootprio_find_scsi_device(tmpl_vlun->pci, tmpl_vlun->target, tmpl_vlun->lun);
+        prio = bootprio_find_scsi_device(tmpl_vlun->pci, tmpl_vlun->target, lun);
     if (tmpl_vlun->mmio)
-        prio = bootprio_find_scsi_mmio_device(tmpl_vlun->mmio, tmpl_vlun->target, tmpl_vlun->lun);
+        prio = bootprio_find_scsi_mmio_device(tmpl_vlun->mmio, tmpl_vlun->target, lun);
 
     if (skip_nonbootable && prio < 0) {
         dprintf(1, "skipping init of a non-bootable virtio-scsi dev at %s,"
                 " target %d, lun %d\n",
-                tmpl_vlun->name, tmpl_vlun->target, tmpl_vlun->lun);
+                tmpl_vlun->name, tmpl_vlun->target, lun);
         return -1;
     }
 
-- 
2.20.1

_______________________________________________
SeaBIOS mailing list -- seabios@seabios.org
To unsubscribe send an email to seabios-leave@seabios.org

On Mon, Jul 27, 2020 at 03:14:15PM +0200, Stefan Reiter wrote:
> Commits
> 
>   d6bdb85eb0 virtio-scsi: skip initializing non-bootable devices
>   f82e82a5ab2 virtio-mmio: add support for scsi devices.
> 
> both use the lun value from tmpl_drv, which is always 0, instead of the
> correct one passed as a separate parameter. This causes systems where
> LUNs other than 0 are set as bootable, but 0 is not, to not boot.

Thanks.  I committed this change.

-Kevin
_______________________________________________
SeaBIOS mailing list -- seabios@seabios.org
To unsubscribe send an email to seabios-leave@seabios.org