On Tue, Oct 17, 2017 at 10:29:41AM -0700, Alistair Francis wrote:
> This series adds the ZynqMP Power Management Unit (PMU) machine with basic
> functionality.
>
> The machine only has the
> - CPU
> - Memory
> - Interrupt controller
> - IPI device
>
> connected, but that is enough to run some of the ROM and firmware
> code on the machine
>
> The series also adds the IPI device and connects it to the ZynqMP ARM
> side and the ZynqMP PMU. These IPI devices don't connect between the ARM
> and MicroBlaze instances though.
Thanks Alistair,
I've merged this into mb-next for 2.12.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Best regards,
Edgar
>
> V4:
> - Rename the ZCU102 machine to just ZynqMP
> - Rename the PMC SoC to "xlnx,zynqmp-pmu-soc"
> - Move the IPI device to the machine instead of the SoC
> V3:
> - Add the interrupt controller
> - Replace some of the error_fatals with errp
> - Fix the PMU CPU name
>
>
> Alistair Francis (8):
> xlnx-zynqmp-pmu: Initial commit of the ZynqMP PMU
> xlnx-zynqmp-pmu: Add the CPU and memory
> aarch64-softmmu.mak: Use an ARM specific config
> xlnx-pmu-iomod-intc: Add the PMU Interrupt controller
> xlnx-zynqmp-pmu: Connect the PMU interrupt controller
> xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device
> xlnx-zynqmp-pmu: Connect the IPI device to the PMU
> xlnx-zynqmp: Connect the IPI device to the ZynqMP SoC
>
> default-configs/aarch64-softmmu.mak | 1 +
> default-configs/microblaze-softmmu.mak | 1 +
> hw/arm/Makefile.objs | 2 +-
> hw/arm/xlnx-zynqmp.c | 14 +
> hw/display/Makefile.objs | 2 +-
> hw/dma/Makefile.objs | 2 +-
> hw/intc/Makefile.objs | 2 +
> hw/intc/xlnx-pmu-iomod-intc.c | 554 +++++++++++++++++++++++++++++++++
> hw/intc/xlnx-zynqmp-ipi.c | 377 ++++++++++++++++++++++
> hw/microblaze/Makefile.objs | 1 +
> hw/microblaze/xlnx-zynqmp-pmu.c | 204 ++++++++++++
> include/hw/arm/xlnx-zynqmp.h | 2 +
> include/hw/intc/xlnx-pmu-iomod-intc.h | 58 ++++
> include/hw/intc/xlnx-zynqmp-ipi.h | 57 ++++
> 14 files changed, 1274 insertions(+), 3 deletions(-)
> create mode 100644 hw/intc/xlnx-pmu-iomod-intc.c
> create mode 100644 hw/intc/xlnx-zynqmp-ipi.c
> create mode 100644 hw/microblaze/xlnx-zynqmp-pmu.c
> create mode 100644 include/hw/intc/xlnx-pmu-iomod-intc.h
> create mode 100644 include/hw/intc/xlnx-zynqmp-ipi.h
>
> --
> 2.11.0
>