[PATCH v2] tests/qtest : Use `g_assert_cmphex` instead of `g_assert_cmpuint`

Inès Varhol posted 1 patch 2 weeks, 1 day ago
Patches applied successfully (tree, apply log)
git fetch https://github.com/patchew-project/qemu tags/patchew/20240414173349.31194-1-ines.varhol@telecom-paris.fr
Maintainers: "Cédric Le Goater" <clg@kaod.org>, Peter Maydell <peter.maydell@linaro.org>, Andrew Jeffery <andrew@codeconstruct.com.au>, Joel Stanley <joel@jms.id.au>, Ninad Palsule <ninad@linux.ibm.com>, Thomas Huth <thuth@redhat.com>, Laurent Vivier <lvivier@redhat.com>, Paolo Bonzini <pbonzini@redhat.com>, John Snow <jsnow@redhat.com>
tests/qtest/aspeed_fsi-test.c          |  20 ++--
tests/qtest/cmsdk-apb-dualtimer-test.c |   2 +-
tests/qtest/cmsdk-apb-watchdog-test.c  |   2 +-
tests/qtest/erst-test.c                |   2 +-
tests/qtest/ivshmem-test.c             |  10 +-
tests/qtest/libqos/ahci.c              |   4 +-
tests/qtest/microbit-test.c            |  46 ++++-----
tests/qtest/sse-timer-test.c           |   4 +-
tests/qtest/stm32l4x5_exti-test.c      | 138 ++++++++++++-------------
tests/qtest/stm32l4x5_syscfg-test.c    |  74 ++++++-------
10 files changed, 151 insertions(+), 151 deletions(-)
[PATCH v2] tests/qtest : Use `g_assert_cmphex` instead of `g_assert_cmpuint`
Posted by Inès Varhol 2 weeks, 1 day ago
The messages for assertions using hexadecimal numbers will be
easier to understand with `g_assert_cmphex`.

Cases changed : "cmpuint.*0x", "cmpuint.*<<"

Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
---
 tests/qtest/aspeed_fsi-test.c          |  20 ++--
 tests/qtest/cmsdk-apb-dualtimer-test.c |   2 +-
 tests/qtest/cmsdk-apb-watchdog-test.c  |   2 +-
 tests/qtest/erst-test.c                |   2 +-
 tests/qtest/ivshmem-test.c             |  10 +-
 tests/qtest/libqos/ahci.c              |   4 +-
 tests/qtest/microbit-test.c            |  46 ++++-----
 tests/qtest/sse-timer-test.c           |   4 +-
 tests/qtest/stm32l4x5_exti-test.c      | 138 ++++++++++++-------------
 tests/qtest/stm32l4x5_syscfg-test.c    |  74 ++++++-------
 10 files changed, 151 insertions(+), 151 deletions(-)

diff --git a/tests/qtest/aspeed_fsi-test.c b/tests/qtest/aspeed_fsi-test.c
index b3020dd821..f5ab269972 100644
--- a/tests/qtest/aspeed_fsi-test.c
+++ b/tests/qtest/aspeed_fsi-test.c
@@ -63,22 +63,22 @@ static void test_fsi_setup(QTestState *s, uint32_t base_addr)
         /* Unselect FSI1 */
         aspeed_fsi_writel(s, ASPEED_FSI_OPB1_BUS_SELECT, 0x0);
         curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_SELECT);
-        g_assert_cmpuint(curval, ==, 0x0);
+        g_assert_cmphex(curval, ==, 0x0);
 
         /* Select FSI0 */
         aspeed_fsi_writel(s, ASPEED_FSI_OPB0_BUS_SELECT, 0x1);
         curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_SELECT);
-        g_assert_cmpuint(curval, ==, 0x1);
+        g_assert_cmphex(curval, ==, 0x1);
     } else if (base_addr == AST2600_OPB_FSI1_BASE_ADDR) {
         /* Unselect FSI0 */
         aspeed_fsi_writel(s, ASPEED_FSI_OPB0_BUS_SELECT, 0x0);
         curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_SELECT);
-        g_assert_cmpuint(curval, ==, 0x0);
+        g_assert_cmphex(curval, ==, 0x0);
 
         /* Select FSI1 */
         aspeed_fsi_writel(s, ASPEED_FSI_OPB1_BUS_SELECT, 0x1);
         curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_SELECT);
-        g_assert_cmpuint(curval, ==, 0x1);
+        g_assert_cmphex(curval, ==, 0x1);
     } else {
         g_assert_not_reached();
     }
@@ -145,11 +145,11 @@ static void test_fsi0_getcfam_addr0(const void *data)
     aspeed_fsi_writel(s, ASPEED_FSI_ENGINER_TRIGGER, 0x1);
 
     curval = aspeed_fsi_readl(s, ASPEED_FSI_INTRRUPT_STATUS);
-    g_assert_cmpuint(curval, ==, 0x10000);
+    g_assert_cmphex(curval, ==, 0x10000);
     curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_STATUS);
-    g_assert_cmpuint(curval, ==, 0x0);
+    g_assert_cmphex(curval, ==, 0x0);
     curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_READ_DATA);
-    g_assert_cmpuint(curval, ==, 0x152d02c0);
+    g_assert_cmphex(curval, ==, 0x152d02c0);
 }
 
 static void test_fsi1_getcfam_addr0(const void *data)
@@ -168,11 +168,11 @@ static void test_fsi1_getcfam_addr0(const void *data)
     aspeed_fsi_writel(s, ASPEED_FSI_ENGINER_TRIGGER, 0x1);
 
     curval = aspeed_fsi_readl(s, ASPEED_FSI_INTRRUPT_STATUS);
-    g_assert_cmpuint(curval, ==, 0x20000);
+    g_assert_cmphex(curval, ==, 0x20000);
     curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_STATUS);
-    g_assert_cmpuint(curval, ==, 0x0);
+    g_assert_cmphex(curval, ==, 0x0);
     curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_READ_DATA);
-    g_assert_cmpuint(curval, ==, 0x152d02c0);
+    g_assert_cmphex(curval, ==, 0x152d02c0);
 }
 
 int main(int argc, char **argv)
diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c
index ad6a758289..3b89bed97d 100644
--- a/tests/qtest/cmsdk-apb-dualtimer-test.c
+++ b/tests/qtest/cmsdk-apb-dualtimer-test.c
@@ -69,7 +69,7 @@ static void test_dualtimer(void)
      * tick VALUE should have wrapped round to 0xffff.
      */
     clock_step(40);
-    g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff);
+    g_assert_cmphex(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff);
 
     /* Check that any write to INTCLR clears interrupt */
     writel(TIMER_BASE + TIMER1INTCLR, 1);
diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c
index 2710cb17b8..00b5dbbc81 100644
--- a/tests/qtest/cmsdk-apb-watchdog-test.c
+++ b/tests/qtest/cmsdk-apb-watchdog-test.c
@@ -88,7 +88,7 @@ static void test_clock_change(void)
 
     /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */
     rcc = readl(SSYS_BASE + RCC);
-    g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf);
+    g_assert_cmphex(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf);
     rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7);
     writel(SSYS_BASE + RCC, rcc);
 
diff --git a/tests/qtest/erst-test.c b/tests/qtest/erst-test.c
index c45bee7f05..36bbe122ab 100644
--- a/tests/qtest/erst-test.c
+++ b/tests/qtest/erst-test.c
@@ -109,7 +109,7 @@ static void setup_vm_cmd(ERSTState *s, const char *cmd)
     g_assert_cmpuint(s->reg_barsize, ==, 16);
 
     s->mem_bar = qpci_iomap(s->dev, 1, &s->mem_barsize);
-    g_assert_cmpuint(s->mem_barsize, ==, 0x2000);
+    g_assert_cmphex(s->mem_barsize, ==, 0x2000);
 
     qpci_device_enable(s->dev);
 }
diff --git a/tests/qtest/ivshmem-test.c b/tests/qtest/ivshmem-test.c
index 9bf8e78df6..fb45fdeb07 100644
--- a/tests/qtest/ivshmem-test.c
+++ b/tests/qtest/ivshmem-test.c
@@ -158,7 +158,7 @@ static void test_ivshmem_single(void)
 
     /* trigger interrupt via registers */
     out_reg(s, INTRMASK, 0xffffffff);
-    g_assert_cmpuint(in_reg(s, INTRMASK), ==, 0xffffffff);
+    g_assert_cmphex(in_reg(s, INTRMASK), ==, 0xffffffff);
     out_reg(s, INTRSTATUS, 1);
     /* check interrupt status */
     g_assert_cmpuint(in_reg(s, INTRSTATUS), ==, 1);
@@ -211,11 +211,11 @@ static void test_ivshmem_pair(void)
     memset(tmpshmem, 0x42, TMPSHMSIZE);
     read_mem(s1, 0, data, TMPSHMSIZE);
     for (i = 0; i < TMPSHMSIZE; i++) {
-        g_assert_cmpuint(data[i], ==, 0x42);
+        g_assert_cmphex(data[i], ==, 0x42);
     }
     read_mem(s2, 0, data, TMPSHMSIZE);
     for (i = 0; i < TMPSHMSIZE; i++) {
-        g_assert_cmpuint(data[i], ==, 0x42);
+        g_assert_cmphex(data[i], ==, 0x42);
     }
 
     /* guest 1 write, guest 2 read */
@@ -224,7 +224,7 @@ static void test_ivshmem_pair(void)
     memset(data, 0, TMPSHMSIZE);
     read_mem(s2, 0, data, TMPSHMSIZE);
     for (i = 0; i < TMPSHMSIZE; i++) {
-        g_assert_cmpuint(data[i], ==, 0x43);
+        g_assert_cmphex(data[i], ==, 0x43);
     }
 
     /* guest 2 write, guest 1 read */
@@ -233,7 +233,7 @@ static void test_ivshmem_pair(void)
     memset(data, 0, TMPSHMSIZE);
     read_mem(s1, 0, data, TMPSHMSIZE);
     for (i = 0; i < TMPSHMSIZE; i++) {
-        g_assert_cmpuint(data[i], ==, 0x44);
+        g_assert_cmphex(data[i], ==, 0x44);
     }
 
     cleanup_vm(s1);
diff --git a/tests/qtest/libqos/ahci.c b/tests/qtest/libqos/ahci.c
index 6d59c7551a..34a75b7f43 100644
--- a/tests/qtest/libqos/ahci.c
+++ b/tests/qtest/libqos/ahci.c
@@ -1046,7 +1046,7 @@ static void ahci_atapi_command_set_offset(AHCICommand *cmd, uint64_t lba)
     case CMD_ATAPI_REQUEST_SENSE:
     case CMD_ATAPI_TEST_UNIT_READY:
     case CMD_ATAPI_START_STOP_UNIT:
-        g_assert_cmpuint(lba, ==, 0x00);
+        g_assert_cmphex(lba, ==, 0x00);
         break;
     default:
         /* SCSI doesn't have uniform packet formats,
@@ -1109,7 +1109,7 @@ static void ahci_atapi_set_size(AHCICommand *cmd, uint64_t xbytes)
         break;
     case CMD_ATAPI_READ_CD:
         /* 24bit BE store */
-        g_assert_cmpuint(nsectors, <, 1ULL << 24);
+        g_assert_cmphex(nsectors, <, 1ULL << 24);
         tmp = nsectors;
         cbd[6] = (tmp & 0xFF0000) >> 16;
         cbd[7] = (tmp & 0xFF00) >> 8;
diff --git a/tests/qtest/microbit-test.c b/tests/qtest/microbit-test.c
index 72190d38f7..505c831f13 100644
--- a/tests/qtest/microbit-test.c
+++ b/tests/qtest/microbit-test.c
@@ -143,14 +143,14 @@ static void test_microbit_i2c(void)
 
     /* MMA8653 magnetometer detection */
     val = i2c_read_byte(qts, 0x3A, 0x0D);
-    g_assert_cmpuint(val, ==, 0x5A);
+    g_assert_cmphex(val, ==, 0x5A);
 
     val = i2c_read_byte(qts, 0x3A, 0x0D);
-    g_assert_cmpuint(val, ==, 0x5A);
+    g_assert_cmphex(val, ==, 0x5A);
 
     /* LSM303 accelerometer detection */
     val = i2c_read_byte(qts, 0x3C, 0x4F);
-    g_assert_cmpuint(val, ==, 0x40);
+    g_assert_cmphex(val, ==, 0x40);
 
     qtest_writel(qts, NRF51_TWI_BASE + NRF51_TWI_REG_ENABLE, 0);
 
@@ -171,7 +171,7 @@ static void fill_and_erase(QTestState *qts, hwaddr base, hwaddr size,
 
     /* Check memory */
     for (i = 0; i < size / 4; i++) {
-        g_assert_cmpuint(qtest_readl(qts, base + i * 4), ==, 0xFFFFFFFF);
+        g_assert_cmphex(qtest_readl(qts, base + i * 4), ==, 0xFFFFFFFF);
     }
 
     /* Fill memory */
@@ -191,7 +191,7 @@ static void test_nrf51_nvmc(void)
 
     /* Test always ready */
     value = qtest_readl(qts, NRF51_NVMC_BASE + NRF51_NVMC_READY);
-    g_assert_cmpuint(value & 0x01, ==, 0x01);
+    g_assert_cmphex(value & 0x01, ==, 0x01);
 
     /* Test write-read config register */
     qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x03);
@@ -302,19 +302,19 @@ static void test_nrf51_gpio(void)
     g_assert_cmpuint(actual, ==, expected);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START)
              & 0x01;
-    g_assert_cmpuint(actual, ==, 0x01);
+    g_assert_cmphex(actual, ==, 0x01);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
-    g_assert_cmpuint(actual, ==, 0x01);
+    g_assert_cmphex(actual, ==, 0x01);
 
     /* Check clear via DIRCLR */
     qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_DIRCLR, 0x80000001);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR);
-    g_assert_cmpuint(actual, ==, 0x00000000);
+    g_assert_cmphex(actual, ==, 0x00000000);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START)
              & 0x01;
-    g_assert_cmpuint(actual, ==, 0x00);
+    g_assert_cmphex(actual, ==, 0x00);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
-    g_assert_cmpuint(actual, ==, 0x00);
+    g_assert_cmphex(actual, ==, 0x00);
 
     /* Check set via DIR */
     expected = 0x80000001;
@@ -323,9 +323,9 @@ static void test_nrf51_gpio(void)
     g_assert_cmpuint(actual, ==, expected);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START)
              & 0x01;
-    g_assert_cmpuint(actual, ==, 0x01);
+    g_assert_cmphex(actual, ==, 0x01);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
-    g_assert_cmpuint(actual, ==, 0x01);
+    g_assert_cmphex(actual, ==, 0x01);
 
     /* Reset DIR */
     qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR, 0x00000000);
@@ -334,33 +334,33 @@ static void test_nrf51_gpio(void)
     qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x00);
     qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, 0);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
-    g_assert_cmpuint(actual, ==, 0x00);
+    g_assert_cmphex(actual, ==, 0x00);
     qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, 1);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
-    g_assert_cmpuint(actual, ==, 0x01);
+    g_assert_cmphex(actual, ==, 0x01);
     qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, -1);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
-    g_assert_cmpuint(actual, ==, 0x01);
+    g_assert_cmphex(actual, ==, 0x01);
     qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
 
     /* Check pull-up working */
     qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, 0);
     qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0000);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
-    g_assert_cmpuint(actual, ==, 0x00);
+    g_assert_cmphex(actual, ==, 0x00);
     qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b1110);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
-    g_assert_cmpuint(actual, ==, 0x01);
+    g_assert_cmphex(actual, ==, 0x01);
     qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
 
     /* Check pull-down working */
     qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, 1);
     qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0000);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
-    g_assert_cmpuint(actual, ==, 0x01);
+    g_assert_cmphex(actual, ==, 0x01);
     qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0110);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
-    g_assert_cmpuint(actual, ==, 0x00);
+    g_assert_cmphex(actual, ==, 0x00);
     qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
     qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, -1);
 
@@ -376,11 +376,11 @@ static void test_nrf51_gpio(void)
     qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b01);
     qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
-    g_assert_cmpuint(actual, ==, 0x01);
+    g_assert_cmphex(actual, ==, 0x01);
 
     qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTCLR, 0x01);
     actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
-    g_assert_cmpuint(actual, ==, 0x00);
+    g_assert_cmphex(actual, ==, 0x00);
 
     /*
      * Check short-circuit - generates an guest_error which must be checked
@@ -410,7 +410,7 @@ static void test_nrf51_gpio_detect(void)
         /* Set pin high */
         qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", i, 1);
         uint32_t actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN);
-        g_assert_cmpuint(actual, ==, 1 << i);
+        g_assert_cmphex(actual, ==, 1 << i);
 
         /* Check that DETECT is high */
         g_assert_true(qtest_get_irq(qts, 0));
@@ -418,7 +418,7 @@ static void test_nrf51_gpio_detect(void)
         /* Set pin low, check that DETECT goes low. */
         qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", i, 0);
         actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN);
-        g_assert_cmpuint(actual, ==, 0x0);
+        g_assert_cmphex(actual, ==, 0x0);
         g_assert_false(qtest_get_irq(qts, 0));
     }
 
diff --git a/tests/qtest/sse-timer-test.c b/tests/qtest/sse-timer-test.c
index a65d7542d5..fd5635d4c9 100644
--- a/tests/qtest/sse-timer-test.c
+++ b/tests/qtest/sse-timer-test.c
@@ -181,12 +181,12 @@ static void test_timer(void)
     writel(TIMER_BASE + CNTP_AIVAL_CTL, 0);
     clock_step_ticks(0x42ULL << 32);
     g_assert_cmpuint(readl(TIMER_BASE + CNTPCT_LO), ==, 4400);
-    g_assert_cmpuint(readl(TIMER_BASE + CNTPCT_HI), ==, 0x42);
+    g_assert_cmphex(readl(TIMER_BASE + CNTPCT_HI), ==, 0x42);
 
     /* Turn on the autoinc again to check AIVAL_HI */
     writel(TIMER_BASE + CNTP_AIVAL_CTL, 1);
     g_assert_cmpuint(readl(TIMER_BASE + CNTP_AIVAL_LO), ==, 4600);
-    g_assert_cmpuint(readl(TIMER_BASE + CNTP_AIVAL_HI), ==, 0x42);
+    g_assert_cmphex(readl(TIMER_BASE + CNTP_AIVAL_HI), ==, 0x42);
 }
 
 static void test_timer_scale_change(void)
diff --git a/tests/qtest/stm32l4x5_exti-test.c b/tests/qtest/stm32l4x5_exti-test.c
index 81830be8ae..7092860b9b 100644
--- a/tests/qtest/stm32l4x5_exti-test.c
+++ b/tests/qtest/stm32l4x5_exti-test.c
@@ -70,44 +70,44 @@ static void test_reg_write_read(void)
     /* Test that non-reserved bits in xMR and xTSR can be set and cleared */
 
     exti_writel(EXTI_IMR1, 0xFFFFFFFF);
-    g_assert_cmpuint(exti_readl(EXTI_IMR1), ==, 0xFFFFFFFF);
+    g_assert_cmphex(exti_readl(EXTI_IMR1), ==, 0xFFFFFFFF);
     exti_writel(EXTI_IMR1, 0x00000000);
-    g_assert_cmpuint(exti_readl(EXTI_IMR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_IMR1), ==, 0x00000000);
 
     exti_writel(EXTI_EMR1, 0xFFFFFFFF);
-    g_assert_cmpuint(exti_readl(EXTI_EMR1), ==, 0xFFFFFFFF);
+    g_assert_cmphex(exti_readl(EXTI_EMR1), ==, 0xFFFFFFFF);
     exti_writel(EXTI_EMR1, 0x00000000);
-    g_assert_cmpuint(exti_readl(EXTI_EMR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_EMR1), ==, 0x00000000);
 
     exti_writel(EXTI_RTSR1, 0xFFFFFFFF);
-    g_assert_cmpuint(exti_readl(EXTI_RTSR1), ==, 0x007DFFFF);
+    g_assert_cmphex(exti_readl(EXTI_RTSR1), ==, 0x007DFFFF);
     exti_writel(EXTI_RTSR1, 0x00000000);
-    g_assert_cmpuint(exti_readl(EXTI_RTSR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_RTSR1), ==, 0x00000000);
 
     exti_writel(EXTI_FTSR1, 0xFFFFFFFF);
-    g_assert_cmpuint(exti_readl(EXTI_FTSR1), ==, 0x007DFFFF);
+    g_assert_cmphex(exti_readl(EXTI_FTSR1), ==, 0x007DFFFF);
     exti_writel(EXTI_FTSR1, 0x00000000);
-    g_assert_cmpuint(exti_readl(EXTI_FTSR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_FTSR1), ==, 0x00000000);
 
     exti_writel(EXTI_IMR2, 0xFFFFFFFF);
-    g_assert_cmpuint(exti_readl(EXTI_IMR2), ==, 0x000000FF);
+    g_assert_cmphex(exti_readl(EXTI_IMR2), ==, 0x000000FF);
     exti_writel(EXTI_IMR2, 0x00000000);
-    g_assert_cmpuint(exti_readl(EXTI_IMR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_IMR2), ==, 0x00000000);
 
     exti_writel(EXTI_EMR2, 0xFFFFFFFF);
-    g_assert_cmpuint(exti_readl(EXTI_EMR2), ==, 0x000000FF);
+    g_assert_cmphex(exti_readl(EXTI_EMR2), ==, 0x000000FF);
     exti_writel(EXTI_EMR2, 0x00000000);
-    g_assert_cmpuint(exti_readl(EXTI_EMR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_EMR2), ==, 0x00000000);
 
     exti_writel(EXTI_RTSR2, 0xFFFFFFFF);
-    g_assert_cmpuint(exti_readl(EXTI_RTSR2), ==, 0x00000078);
+    g_assert_cmphex(exti_readl(EXTI_RTSR2), ==, 0x00000078);
     exti_writel(EXTI_RTSR2, 0x00000000);
-    g_assert_cmpuint(exti_readl(EXTI_RTSR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_RTSR2), ==, 0x00000000);
 
     exti_writel(EXTI_FTSR2, 0xFFFFFFFF);
-    g_assert_cmpuint(exti_readl(EXTI_FTSR2), ==, 0x00000078);
+    g_assert_cmphex(exti_readl(EXTI_FTSR2), ==, 0x00000078);
     exti_writel(EXTI_FTSR2, 0x00000000);
-    g_assert_cmpuint(exti_readl(EXTI_FTSR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_FTSR2), ==, 0x00000000);
 }
 
 static void test_direct_lines_write(void)
@@ -115,28 +115,28 @@ static void test_direct_lines_write(void)
     /* Test that direct lines reserved bits are not written to */
 
     exti_writel(EXTI_RTSR1, 0xFF820000);
-    g_assert_cmpuint(exti_readl(EXTI_RTSR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_RTSR1), ==, 0x00000000);
 
     exti_writel(EXTI_FTSR1, 0xFF820000);
-    g_assert_cmpuint(exti_readl(EXTI_FTSR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_FTSR1), ==, 0x00000000);
 
     exti_writel(EXTI_SWIER1, 0xFF820000);
-    g_assert_cmpuint(exti_readl(EXTI_SWIER1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_SWIER1), ==, 0x00000000);
 
     exti_writel(EXTI_PR1, 0xFF820000);
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
 
     exti_writel(EXTI_RTSR2, 0x00000087);
-    g_assert_cmpuint(exti_readl(EXTI_RTSR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_RTSR2), ==, 0x00000000);
 
     exti_writel(EXTI_FTSR2, 0x00000087);
-    g_assert_cmpuint(exti_readl(EXTI_FTSR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_FTSR2), ==, 0x00000000);
 
     exti_writel(EXTI_SWIER2, 0x00000087);
-    g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_SWIER2), ==, 0x00000000);
 
     exti_writel(EXTI_PR2, 0x00000087);
-    g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000000);
 }
 
 static void test_reserved_bits_write(void)
@@ -144,22 +144,22 @@ static void test_reserved_bits_write(void)
     /* Test that reserved bits stay are not written to */
 
     exti_writel(EXTI_IMR2, 0xFFFFFF00);
-    g_assert_cmpuint(exti_readl(EXTI_IMR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_IMR2), ==, 0x00000000);
 
     exti_writel(EXTI_EMR2, 0xFFFFFF00);
-    g_assert_cmpuint(exti_readl(EXTI_EMR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_EMR2), ==, 0x00000000);
 
     exti_writel(EXTI_RTSR2, 0xFFFFFF00);
-    g_assert_cmpuint(exti_readl(EXTI_RTSR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_RTSR2), ==, 0x00000000);
 
     exti_writel(EXTI_FTSR2, 0xFFFFFF00);
-    g_assert_cmpuint(exti_readl(EXTI_FTSR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_FTSR2), ==, 0x00000000);
 
     exti_writel(EXTI_SWIER2, 0xFFFFFF00);
-    g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_SWIER2), ==, 0x00000000);
 
     exti_writel(EXTI_PR2, 0xFFFFFF00);
-    g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000000);
 }
 
 static void test_software_interrupt(void)
@@ -180,7 +180,7 @@ static void test_software_interrupt(void)
 
     enable_nvic_irq(EXTI0_IRQ);
     /* Check that there are no interrupts already pending in PR */
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     /* Check that this specific interrupt isn't pending in NVIC */
     g_assert_false(check_nvic_pending(EXTI0_IRQ));
 
@@ -191,9 +191,9 @@ static void test_software_interrupt(void)
     exti_writel(EXTI_SWIER1, 0x00000001);
 
     /* Check that the write in SWIER was effective */
-    g_assert_cmpuint(exti_readl(EXTI_SWIER1), ==, 0x00000001);
+    g_assert_cmphex(exti_readl(EXTI_SWIER1), ==, 0x00000001);
     /* Check that the corresponding pending bit in PR is set */
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000001);
     /* Check that the corresponding interrupt is pending in the NVIC */
     g_assert_true(check_nvic_pending(EXTI0_IRQ));
 
@@ -201,9 +201,9 @@ static void test_software_interrupt(void)
     exti_writel(EXTI_PR1, 0x00000001);
 
     /* Check that the write in PR was effective */
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     /* Check that the corresponding bit in SWIER was cleared */
-    g_assert_cmpuint(exti_readl(EXTI_SWIER1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_SWIER1), ==, 0x00000000);
     /* Check that the interrupt is still pending in the NVIC */
     g_assert_true(check_nvic_pending(EXTI0_IRQ));
 
@@ -214,7 +214,7 @@ static void test_software_interrupt(void)
 
     enable_nvic_irq(EXTI35_IRQ);
     /* Check that there are no interrupts already pending */
-    g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000000);
     g_assert_false(check_nvic_pending(EXTI35_IRQ));
 
     /* Enable interrupt line EXTI0 */
@@ -224,9 +224,9 @@ static void test_software_interrupt(void)
     exti_writel(EXTI_SWIER2, 0x00000008);
 
     /* Check that the write in SWIER was effective */
-    g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000008);
+    g_assert_cmphex(exti_readl(EXTI_SWIER2), ==, 0x00000008);
     /* Check that the corresponding pending bit in PR is set */
-    g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000008);
+    g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000008);
     /* Check that the corresponding interrupt is pending in the NVIC */
     g_assert_true(check_nvic_pending(EXTI35_IRQ));
 
@@ -234,9 +234,9 @@ static void test_software_interrupt(void)
     exti_writel(EXTI_PR2, 0x00000008);
 
     /* Check that the write in PR was effective */
-    g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000000);
     /* Check that the corresponding bit in SWIER was cleared */
-    g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_SWIER2), ==, 0x00000000);
     /* Check that the interrupt is still pending in the NVIC */
     g_assert_true(check_nvic_pending(EXTI35_IRQ));
 
@@ -259,16 +259,16 @@ static void test_edge_selector(void)
 
     /* Test that an irq is raised on rising edge only */
     exti_set_irq(0, 0);
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     g_assert_false(check_nvic_pending(EXTI0_IRQ));
 
     exti_set_irq(0, 1);
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000001);
     g_assert_true(check_nvic_pending(EXTI0_IRQ));
 
     /* Clean the test */
     exti_writel(EXTI_PR1, 0x00000001);
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     unpend_nvic_irq(EXTI0_IRQ);
     g_assert_false(check_nvic_pending(EXTI0_IRQ));
 
@@ -280,16 +280,16 @@ static void test_edge_selector(void)
 
     /* Test that an irq is raised on falling edge only */
     exti_set_irq(0, 1);
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     g_assert_false(check_nvic_pending(EXTI0_IRQ));
 
     exti_set_irq(0, 0);
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000001);
     g_assert_true(check_nvic_pending(EXTI0_IRQ));
 
     /* Clean the test */
     exti_writel(EXTI_PR1, 0x00000001);
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     unpend_nvic_irq(EXTI0_IRQ);
     g_assert_false(check_nvic_pending(EXTI0_IRQ));
 
@@ -300,23 +300,23 @@ static void test_edge_selector(void)
 
     /* Test that an irq is raised on rising edge */
     exti_set_irq(0, 1);
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000001);
     g_assert_true(check_nvic_pending(EXTI0_IRQ));
 
     /* Clean the test */
     exti_writel(EXTI_PR1, 0x00000001);
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     unpend_nvic_irq(EXTI0_IRQ);
     g_assert_false(check_nvic_pending(EXTI0_IRQ));
 
     /* Test that an irq is raised on falling edge */
     exti_set_irq(0, 0);
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000001);
     g_assert_true(check_nvic_pending(EXTI0_IRQ));
 
     /* Clean the test */
     exti_writel(EXTI_PR1, 0x00000001);
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     unpend_nvic_irq(EXTI0_IRQ);
     g_assert_false(check_nvic_pending(EXTI0_IRQ));
 
@@ -327,11 +327,11 @@ static void test_edge_selector(void)
 
     /* Test that no irq is raised */
     exti_set_irq(0, 1);
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     g_assert_false(check_nvic_pending(EXTI0_IRQ));
 
     exti_set_irq(0, 0);
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     g_assert_false(check_nvic_pending(EXTI0_IRQ));
 }
 
@@ -350,7 +350,7 @@ static void test_no_software_interrupt(void)
 
     enable_nvic_irq(EXTI0_IRQ);
     /* Check that there are no interrupts already pending in PR */
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     /* Check that this specific interrupt isn't pending in NVIC */
     g_assert_false(check_nvic_pending(EXTI0_IRQ));
 
@@ -361,9 +361,9 @@ static void test_no_software_interrupt(void)
     exti_writel(EXTI_SWIER1, 0x00000001);
 
     /* Check that the write in SWIER was effective */
-    g_assert_cmpuint(exti_readl(EXTI_SWIER1), ==, 0x00000001);
+    g_assert_cmphex(exti_readl(EXTI_SWIER1), ==, 0x00000001);
     /* Check that the pending bit in PR wasn't set */
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     /* Check that the interrupt isn't pending in NVIC */
     g_assert_false(check_nvic_pending(EXTI0_IRQ));
 
@@ -371,7 +371,7 @@ static void test_no_software_interrupt(void)
     exti_writel(EXTI_IMR1, 0x00000001);
 
     /* Check that the pending bit in PR wasn't set */
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     /* Check that the interrupt isn't pending in NVIC */
     g_assert_false(check_nvic_pending(EXTI0_IRQ));
 
@@ -382,7 +382,7 @@ static void test_no_software_interrupt(void)
 
     enable_nvic_irq(EXTI35_IRQ);
     /* Check that there are no interrupts already pending in PR */
-    g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000000);
     /* Check that this specific interrupt isn't pending in NVIC */
     g_assert_false(check_nvic_pending(EXTI35_IRQ));
 
@@ -393,9 +393,9 @@ static void test_no_software_interrupt(void)
     exti_writel(EXTI_SWIER2, 0x00000008);
 
     /* Check that the write in SWIER was effective */
-    g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000008);
+    g_assert_cmphex(exti_readl(EXTI_SWIER2), ==, 0x00000008);
     /* Check that the pending bit in PR wasn't set */
-    g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000000);
     /* Check that the interrupt isn't pending in NVIC */
     g_assert_false(check_nvic_pending(EXTI35_IRQ));
 
@@ -403,7 +403,7 @@ static void test_no_software_interrupt(void)
     exti_writel(EXTI_IMR2, 0x00000008);
 
     /* Check that the pending bit in PR wasn't set */
-    g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000000);
     /* Check that the interrupt isn't pending in NVIC */
     g_assert_false(check_nvic_pending(EXTI35_IRQ));
 }
@@ -423,7 +423,7 @@ static void test_masked_interrupt(void)
 
     enable_nvic_irq(EXTI1_IRQ);
     /* Check that there are no interrupts already pending in PR */
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     /* Check that this specific interrupt isn't pending in NVIC */
     g_assert_false(check_nvic_pending(EXTI1_IRQ));
 
@@ -437,7 +437,7 @@ static void test_masked_interrupt(void)
     exti_set_irq(1, 1);
 
     /* Check that the pending bit in PR wasn't set */
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     /* Check that the interrupt isn't pending in NVIC */
     g_assert_false(check_nvic_pending(EXTI1_IRQ));
 
@@ -445,7 +445,7 @@ static void test_masked_interrupt(void)
     exti_writel(EXTI_IMR1, 0x00000002);
 
     /* Check that the pending bit in PR wasn't set */
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     /* Check that the interrupt isn't pending in NVIC */
     g_assert_false(check_nvic_pending(EXTI1_IRQ));
 }
@@ -469,7 +469,7 @@ static void test_interrupt(void)
 
     enable_nvic_irq(EXTI1_IRQ);
     /* Check that there are no interrupts already pending in PR */
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     /* Check that this specific interrupt isn't pending in NVIC */
     g_assert_false(check_nvic_pending(EXTI1_IRQ));
 
@@ -483,7 +483,7 @@ static void test_interrupt(void)
     exti_set_irq(1, 1);
 
     /* Check that the pending bit in PR was set */
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000002);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000002);
     /* Check that the interrupt is pending in NVIC */
     g_assert_true(check_nvic_pending(EXTI1_IRQ));
 
@@ -491,7 +491,7 @@ static void test_interrupt(void)
     exti_writel(EXTI_PR1, 0x00000002);
 
     /* Check that the write in PR was effective */
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     /* Check that the interrupt is still pending in the NVIC */
     g_assert_true(check_nvic_pending(EXTI1_IRQ));
 
@@ -509,7 +509,7 @@ static void test_orred_interrupts(void)
      */
     enable_nvic_irq(EXTI5_9_IRQ);
     /* Check that there are no interrupts already pending in PR */
-    g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+    g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
     /* Check that this specific interrupt isn't pending in NVIC */
     g_assert_false(check_nvic_pending(EXTI5_9_IRQ));
 
@@ -522,11 +522,11 @@ static void test_orred_interrupts(void)
     /* Raise GPIO line i, check that the interrupt is pending */
     for (unsigned i = 5; i < 10; i++) {
         exti_set_irq(i, 1);
-        g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 1 << i);
+        g_assert_cmphex(exti_readl(EXTI_PR1), ==, 1 << i);
         g_assert_true(check_nvic_pending(EXTI5_9_IRQ));
 
         exti_writel(EXTI_PR1, 1 << i);
-        g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+        g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
         g_assert_true(check_nvic_pending(EXTI5_9_IRQ));
 
         unpend_nvic_irq(EXTI5_9_IRQ);
diff --git a/tests/qtest/stm32l4x5_syscfg-test.c b/tests/qtest/stm32l4x5_syscfg-test.c
index ed4801798d..59bac829b7 100644
--- a/tests/qtest/stm32l4x5_syscfg-test.c
+++ b/tests/qtest/stm32l4x5_syscfg-test.c
@@ -54,27 +54,27 @@ static void test_reset(void)
     /*
      * Test that registers are initialized at the correct values
      */
-    g_assert_cmpuint(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000000);
 
-    g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR1), ==, 0x7C000001);
+    g_assert_cmphex(syscfg_readl(SYSCFG_CFGR1), ==, 0x7C000001);
 
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR1), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR1), ==, 0x00000000);
 
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR2), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR2), ==, 0x00000000);
 
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR3), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR3), ==, 0x00000000);
 
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR4), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR4), ==, 0x00000000);
 
-    g_assert_cmpuint(syscfg_readl(SYSCFG_SCSR), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_SCSR), ==, 0x00000000);
 
-    g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR2), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_CFGR2), ==, 0x00000000);
 
-    g_assert_cmpuint(syscfg_readl(SYSCFG_SWPR), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_SWPR), ==, 0x00000000);
 
-    g_assert_cmpuint(syscfg_readl(SYSCFG_SKR), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_SKR), ==, 0x00000000);
 
-    g_assert_cmpuint(syscfg_readl(SYSCFG_SWPR2), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_SWPR2), ==, 0x00000000);
 }
 
 static void test_reserved_bits(void)
@@ -87,25 +87,25 @@ static void test_reserved_bits(void)
      * register is still at reset value
      */
     syscfg_writel(SYSCFG_MEMRMP, 0xFFFFFEF8);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000000);
 
     syscfg_writel(SYSCFG_CFGR1, 0x7F00FEFF);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR1), ==, 0x7C000001);
+    g_assert_cmphex(syscfg_readl(SYSCFG_CFGR1), ==, 0x7C000001);
 
     syscfg_writel(SYSCFG_EXTICR1, 0xFFFF0000);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR1), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR1), ==, 0x00000000);
 
     syscfg_writel(SYSCFG_EXTICR2, 0xFFFF0000);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR2), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR2), ==, 0x00000000);
 
     syscfg_writel(SYSCFG_EXTICR3, 0xFFFF0000);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR3), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR3), ==, 0x00000000);
 
     syscfg_writel(SYSCFG_EXTICR4, 0xFFFF0000);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR4), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR4), ==, 0x00000000);
 
     syscfg_writel(SYSCFG_SKR, 0xFFFFFF00);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_SKR), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_SKR), ==, 0x00000000);
 }
 
 static void test_set_and_clear(void)
@@ -114,40 +114,40 @@ static void test_set_and_clear(void)
      * Test that regular bits can be set and cleared
      */
     syscfg_writel(SYSCFG_MEMRMP, 0x00000107);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000107);
+    g_assert_cmphex(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000107);
     syscfg_writel(SYSCFG_MEMRMP, 0x00000000);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000000);
 
     /* cfgr1 bit 0 is clear only so we keep it set */
     syscfg_writel(SYSCFG_CFGR1, 0xFCFF0101);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR1), ==, 0xFCFF0101);
+    g_assert_cmphex(syscfg_readl(SYSCFG_CFGR1), ==, 0xFCFF0101);
     syscfg_writel(SYSCFG_CFGR1, 0x00000001);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR1), ==, 0x00000001);
+    g_assert_cmphex(syscfg_readl(SYSCFG_CFGR1), ==, 0x00000001);
 
     syscfg_writel(SYSCFG_EXTICR1, 0x0000FFFF);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR1), ==, 0x0000FFFF);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR1), ==, 0x0000FFFF);
     syscfg_writel(SYSCFG_EXTICR1, 0x00000000);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR1), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR1), ==, 0x00000000);
 
     syscfg_writel(SYSCFG_EXTICR2, 0x0000FFFF);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR2), ==, 0x0000FFFF);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR2), ==, 0x0000FFFF);
     syscfg_writel(SYSCFG_EXTICR2, 0x00000000);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR2), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR2), ==, 0x00000000);
 
     syscfg_writel(SYSCFG_EXTICR3, 0x0000FFFF);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR3), ==, 0x0000FFFF);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR3), ==, 0x0000FFFF);
     syscfg_writel(SYSCFG_EXTICR3, 0x00000000);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR3), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR3), ==, 0x00000000);
 
     syscfg_writel(SYSCFG_EXTICR4, 0x0000FFFF);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR4), ==, 0x0000FFFF);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR4), ==, 0x0000FFFF);
     syscfg_writel(SYSCFG_EXTICR4, 0x00000000);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR4), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR4), ==, 0x00000000);
 
     syscfg_writel(SYSCFG_SKR, 0x000000FF);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_SKR), ==, 0x000000FF);
+    g_assert_cmphex(syscfg_readl(SYSCFG_SKR), ==, 0x000000FF);
     syscfg_writel(SYSCFG_SKR, 0x00000000);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_SKR), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_SKR), ==, 0x00000000);
 }
 
 static void test_clear_by_writing_1(void)
@@ -156,7 +156,7 @@ static void test_clear_by_writing_1(void)
      * Test that writing '1' doesn't set the bit
      */
     syscfg_writel(SYSCFG_CFGR2, 0x00000100);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR2), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_CFGR2), ==, 0x00000000);
 }
 
 static void test_set_only_bits(void)
@@ -166,15 +166,15 @@ static void test_set_only_bits(void)
      */
     syscfg_writel(SYSCFG_CFGR2, 0x0000000F);
     syscfg_writel(SYSCFG_CFGR2, 0x00000000);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR2), ==, 0x0000000F);
+    g_assert_cmphex(syscfg_readl(SYSCFG_CFGR2), ==, 0x0000000F);
 
     syscfg_writel(SYSCFG_SWPR, 0xFFFFFFFF);
     syscfg_writel(SYSCFG_SWPR, 0x00000000);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_SWPR), ==, 0xFFFFFFFF);
+    g_assert_cmphex(syscfg_readl(SYSCFG_SWPR), ==, 0xFFFFFFFF);
 
     syscfg_writel(SYSCFG_SWPR2, 0xFFFFFFFF);
     syscfg_writel(SYSCFG_SWPR2, 0x00000000);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_SWPR2), ==, 0xFFFFFFFF);
+    g_assert_cmphex(syscfg_readl(SYSCFG_SWPR2), ==, 0xFFFFFFFF);
 
     system_reset();
 }
@@ -186,7 +186,7 @@ static void test_clear_only_bits(void)
      */
     syscfg_writel(SYSCFG_CFGR1, 0x00000000);
     syscfg_writel(SYSCFG_CFGR1, 0x00000001);
-    g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR1), ==, 0x00000000);
+    g_assert_cmphex(syscfg_readl(SYSCFG_CFGR1), ==, 0x00000000);
 
     system_reset();
 }
-- 
2.43.2
Re: [PATCH v2] tests/qtest : Use `g_assert_cmphex` instead of `g_assert_cmpuint`
Posted by Ninad Palsule 1 week, 6 days ago
On 4/14/24 12:28, Inès Varhol wrote:
> The messages for assertions using hexadecimal numbers will be
> easier to understand with `g_assert_cmphex`.
>
> Cases changed : "cmpuint.*0x", "cmpuint.*<<"
>
> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
> ---
>   tests/qtest/aspeed_fsi-test.c          |  20 ++--
>   tests/qtest/cmsdk-apb-dualtimer-test.c |   2 +-
>   tests/qtest/cmsdk-apb-watchdog-test.c  |   2 +-
>   tests/qtest/erst-test.c                |   2 +-
>   tests/qtest/ivshmem-test.c             |  10 +-
>   tests/qtest/libqos/ahci.c              |   4 +-
>   tests/qtest/microbit-test.c            |  46 ++++-----
>   tests/qtest/sse-timer-test.c           |   4 +-
>   tests/qtest/stm32l4x5_exti-test.c      | 138 ++++++++++++-------------
>   tests/qtest/stm32l4x5_syscfg-test.c    |  74 ++++++-------
>   10 files changed, 151 insertions(+), 151 deletions(-)
>
> diff --git a/tests/qtest/aspeed_fsi-test.c b/tests/qtest/aspeed_fsi-test.c
> index b3020dd821..f5ab269972 100644
> --- a/tests/qtest/aspeed_fsi-test.c
> +++ b/tests/qtest/aspeed_fsi-test.c
> @@ -63,22 +63,22 @@ static void test_fsi_setup(QTestState *s, uint32_t base_addr)
>           /* Unselect FSI1 */
>           aspeed_fsi_writel(s, ASPEED_FSI_OPB1_BUS_SELECT, 0x0);
>           curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_SELECT);
> -        g_assert_cmpuint(curval, ==, 0x0);
> +        g_assert_cmphex(curval, ==, 0x0);
>   
>           /* Select FSI0 */
>           aspeed_fsi_writel(s, ASPEED_FSI_OPB0_BUS_SELECT, 0x1);
>           curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_SELECT);
> -        g_assert_cmpuint(curval, ==, 0x1);
> +        g_assert_cmphex(curval, ==, 0x1);
>       } else if (base_addr == AST2600_OPB_FSI1_BASE_ADDR) {
>           /* Unselect FSI0 */
>           aspeed_fsi_writel(s, ASPEED_FSI_OPB0_BUS_SELECT, 0x0);
>           curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_SELECT);
> -        g_assert_cmpuint(curval, ==, 0x0);
> +        g_assert_cmphex(curval, ==, 0x0);
>   
>           /* Select FSI1 */
>           aspeed_fsi_writel(s, ASPEED_FSI_OPB1_BUS_SELECT, 0x1);
>           curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_SELECT);
> -        g_assert_cmpuint(curval, ==, 0x1);
> +        g_assert_cmphex(curval, ==, 0x1);
>       } else {
>           g_assert_not_reached();
>       }
> @@ -145,11 +145,11 @@ static void test_fsi0_getcfam_addr0(const void *data)
>       aspeed_fsi_writel(s, ASPEED_FSI_ENGINER_TRIGGER, 0x1);
>   
>       curval = aspeed_fsi_readl(s, ASPEED_FSI_INTRRUPT_STATUS);
> -    g_assert_cmpuint(curval, ==, 0x10000);
> +    g_assert_cmphex(curval, ==, 0x10000);
>       curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_STATUS);
> -    g_assert_cmpuint(curval, ==, 0x0);
> +    g_assert_cmphex(curval, ==, 0x0);
>       curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_READ_DATA);
> -    g_assert_cmpuint(curval, ==, 0x152d02c0);
> +    g_assert_cmphex(curval, ==, 0x152d02c0);
>   }
>   
>   static void test_fsi1_getcfam_addr0(const void *data)
> @@ -168,11 +168,11 @@ static void test_fsi1_getcfam_addr0(const void *data)
>       aspeed_fsi_writel(s, ASPEED_FSI_ENGINER_TRIGGER, 0x1);
>   
>       curval = aspeed_fsi_readl(s, ASPEED_FSI_INTRRUPT_STATUS);
> -    g_assert_cmpuint(curval, ==, 0x20000);
> +    g_assert_cmphex(curval, ==, 0x20000);
>       curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_STATUS);
> -    g_assert_cmpuint(curval, ==, 0x0);
> +    g_assert_cmphex(curval, ==, 0x0);
>       curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_READ_DATA);
> -    g_assert_cmpuint(curval, ==, 0x152d02c0);
> +    g_assert_cmphex(curval, ==, 0x152d02c0);
>   }
>   

aspeed-fsi-test changes looks good. Thanks

Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>



Re: [PATCH v2] tests/qtest : Use `g_assert_cmphex` instead of `g_assert_cmpuint`
Posted by Philippe Mathieu-Daudé 2 weeks ago
On 14/4/24 19:28, Inès Varhol wrote:
> The messages for assertions using hexadecimal numbers will be
> easier to understand with `g_assert_cmphex`.
> 
> Cases changed : "cmpuint.*0x", "cmpuint.*<<"
> 
> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
> ---
>   tests/qtest/aspeed_fsi-test.c          |  20 ++--
>   tests/qtest/cmsdk-apb-dualtimer-test.c |   2 +-
>   tests/qtest/cmsdk-apb-watchdog-test.c  |   2 +-
>   tests/qtest/erst-test.c                |   2 +-
>   tests/qtest/ivshmem-test.c             |  10 +-
>   tests/qtest/libqos/ahci.c              |   4 +-
>   tests/qtest/microbit-test.c            |  46 ++++-----
>   tests/qtest/sse-timer-test.c           |   4 +-
>   tests/qtest/stm32l4x5_exti-test.c      | 138 ++++++++++++-------------
>   tests/qtest/stm32l4x5_syscfg-test.c    |  74 ++++++-------
>   10 files changed, 151 insertions(+), 151 deletions(-)

Thanks for the generic cleanup!

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>