This changes the ohci validation to not assert if invalid
data is fed to the ohci controller. The poc suggested in
https://bugs.launchpad.net/qemu/+bug/1907042
and then migrated to bug #303 does the following to
feed it a SETUP pid and EndPt of 1:

        uint32_t MaxPacket = 64;
        uint32_t TDFormat = 0;
        uint32_t Skip = 0;
        uint32_t Speed = 0;
        uint32_t Direction = 0;  /* #define OHCI_TD_DIR_SETUP 0 */
        uint32_t EndPt = 1;
        uint32_t FuncAddress = 0;
        ed->attr = (MaxPacket << 16) | (TDFormat << 15) | (Skip << 14)
                   | (Speed << 13) | (Direction << 11) | (EndPt << 7)
                   | FuncAddress;
        ed->tailp = /*TDQTailPntr= */ 0;
        ed->headp = ((/*TDQHeadPntr= */ &td[0]) & 0xfffffff0)
                   | (/* ToggleCarry= */ 0 << 1);
        ed->next_ed = (/* NextED= */ 0 & 0xfffffff0)

qemu-fuzz also caught the same issue in #1510. They are
both fixed by this patch.

The if (td.cbp > td.be) logic in ohci_service_td() causes an
ohci_die(). My understanding of the OHCI spec 4.3.1.2
Table 4-2 allows td.cbp to be one byte more than td.be to
signal the buffer has zero length. The new check in qemu
appears to have been added since qemu-4.2. This patch
includes both fixes since they are located very close
to each other.

Signed-off-by: David Hubbard <dmamfmgm@gmail.com>
---
 hw/usb/hcd-ohci.c   | 9 +++++++--
 hw/usb/trace-events | 2 ++
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/hw/usb/hcd-ohci.c b/hw/usb/hcd-ohci.c
index d73b53f33c..a53808126f 100644
--- a/hw/usb/hcd-ohci.c
+++ b/hw/usb/hcd-ohci.c
@@ -927,6 +927,11 @@ static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed)
     case OHCI_TD_DIR_SETUP:
         str = "setup";
         pid = USB_TOKEN_SETUP;
+        if (OHCI_BM(ed->flags, ED_EN) > 0) {  /* setup only allowed to ep 0 */
+            trace_usb_ohci_td_bad_pid(str, ed->flags, td.flags);
+            ohci_die(ohci);
+            return 1;
+        }
         break;
     default:
         trace_usb_ohci_td_bad_direction(dir);
@@ -936,8 +941,8 @@ static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed)
         if ((td.cbp & 0xfffff000) != (td.be & 0xfffff000)) {
             len = (td.be & 0xfff) + 0x1001 - (td.cbp & 0xfff);
         } else {
-            if (td.cbp > td.be) {
-                trace_usb_ohci_iso_td_bad_cc_overrun(td.cbp, td.be);
+            if (td.cbp > td.be + 1) {
+                trace_usb_ohci_td_bad_buf(td.cbp, td.be);
                 ohci_die(ohci);
                 return 1;
             }
diff --git a/hw/usb/trace-events b/hw/usb/trace-events
index ed7dc210d3..b47d082fa3 100644
--- a/hw/usb/trace-events
+++ b/hw/usb/trace-events
@@ -28,6 +28,8 @@ usb_ohci_iso_td_data_overrun(int ret, ssize_t len) "DataOverrun %d > %zu"
 usb_ohci_iso_td_data_underrun(int ret) "DataUnderrun %d"
 usb_ohci_iso_td_nak(int ret) "got NAK/STALL %d"
 usb_ohci_iso_td_bad_response(int ret) "Bad device response %d"
+usb_ohci_td_bad_buf(uint32_t cbp, uint32_t be) "Bad cbp = 0x%x > be = 0x%x"
+usb_ohci_td_bad_pid(const char *s, uint32_t edf, uint32_t tdf) "Bad pid %s: ed.flags 0x%x td.flags 0x%x"
 usb_ohci_port_attach(int index) "port #%d"
 usb_ohci_port_detach(int index) "port #%d"
 usb_ohci_port_wakeup(int index) "port #%d"
-- 
2.34.1