This series primarily enables external interrupt controllers (AIA and PLIC)
in ACPI tables for RISC-V virt platform. It also updates RHCT with CMO and
MMU related information.

Below ECRs for these changes are approved by ASWG and will be
available in next ACPI spec release.

1) MADT (AIA) - https://drive.google.com/file/d/1oMGPyOD58JaPgMl1pKasT-VKsIKia7zR/view?usp=sharing
2) RHCT - https://drive.google.com/file/d/1sKbOa8m1UZw1JkquZYe3F1zQBN1xXsaf/view?usp=sharing

First two patches in this series are to migrate a couple of functions from
ARM architecture to common code so that RISC-V doesn't need to duplicate
the same.

The patch set is based on Alistair's riscv-to-apply.next branch.

These changes are also available in  riscv_acpi_b2_v2 branch at:
https://github.com/vlsunil/qemu/

Changes since v1:
	1) As per Igor's suggestion, migrated fw_cfg and virtio creation
	   functions to device specific file instead of generic aml-build.c.
	   Since ACPI is optional, new files are created and enabled for
	   build only when CONFIG_ACPI is enabled.

	2) As per Igor's suggestion, properties are added to the GPEX PCI
	   host to indicate MMIO ranges. The platform fw can initialize
	   these to appropriate values and the DSDT generator can fetch
	   the information from the host bus itself. This makes the code
	   generic instead of machine specific.

	3) Added PLIC patch from Haibo.

	4) Rebased to latest riscv-to-apply.next and added RB tags as
	   appropriate.


Sunil V L (12):
  hw/arm/virt-acpi-build.c: Migrate fw_cfg creation to common location
  hw/arm/virt-acpi-build.c: Migrate virtio creation to common location
  hw/riscv: virt: Make few IMSIC macros and functions public
  hw/riscv/virt-acpi-build.c: Add AIA support in RINTC
  hw/riscv/virt-acpi-build.c: Add IMSIC in the MADT
  hw/riscv/virt-acpi-build.c: Add APLIC in the MADT
  hw/riscv/virt-acpi-build.c: Add CMO information in RHCT
  hw/riscv/virt-acpi-build.c: Add MMU node in RHCT
  hw/pci-host/gpex: Define properties for MMIO ranges
  hw/riscv/virt: Update GPEX MMIO related properties
  hw/riscv/virt-acpi-build.c: Add IO controllers and devices
  hw/riscv/virt-acpi-build.c: Add PLIC in MADT

 hw/arm/virt-acpi-build.c        |  48 +----
 hw/nvram/fw_cfg-acpi.c          |  17 ++
 hw/nvram/meson.build            |   1 +
 hw/pci-host/gpex-acpi.c         |  13 ++
 hw/pci-host/gpex.c              |  12 ++
 hw/riscv/Kconfig                |   1 +
 hw/riscv/virt-acpi-build.c      | 342 +++++++++++++++++++++++++++++---
 hw/riscv/virt.c                 |  72 +++----
 hw/virtio/meson.build           |   1 +
 hw/virtio/virtio-acpi.c         |  28 +++
 include/hw/nvram/fw_cfg_acpi.h  |   9 +
 include/hw/pci-host/gpex.h      |  28 ++-
 include/hw/riscv/virt.h         |  26 +++
 include/hw/virtio/virtio-acpi.h |  11 +
 14 files changed, 492 insertions(+), 117 deletions(-)
 create mode 100644 hw/nvram/fw_cfg-acpi.c
 create mode 100644 hw/virtio/virtio-acpi.c
 create mode 100644 include/hw/nvram/fw_cfg_acpi.h
 create mode 100644 include/hw/virtio/virtio-acpi.h

-- 
2.39.2