Stefan,
I'll re-send this pull request due to a last minute regression that was
fixed a couple hours ago.
Thanks,
Daniel
On 10/28/22 13:38, Daniel Henrique Barboza wrote:
> The following changes since commit 344744e148e6e865f5a57e745b02a87e5ea534ad:
>
> Merge tag 'dump-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging (2022-10-26 10:53:49 -0400)
>
> are available in the Git repository at:
>
> https://gitlab.com/danielhb/qemu.git tags/pull-ppc-20221028
>
> for you to fetch changes up to 1a4ef9d45dbe6be588735a989e8ed3764a2fcf49:
>
> hw/ppc/e500: Implement pflash handling (2022-10-28 13:26:20 -0300)
>
> ----------------------------------------------------------------
> ppc patch queue for 2022-10-28:
>
> This queue has the second part of the ppc4xx_sdram cleanups, doorbell
> instructions for POWER8 and new pflash handling for the e500 machine.
>
> It also has a lot of performance optimizations in the PowerPC emulation
> done by the researchers of the Eldorado institute. Between using gvec
> for VMX/VSX instructions, a full rework of the interrupt model and PMU
> optimizations, they managed to drastically speed up the emulation of
> powernv8/9/10 machines. Here's an example with avocado tests:
>
> - with master:
>
> tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8:
> PASS (38.89 s)
> tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv9:
> PASS (43.89 s)
>
> - with this queue applied:
>
> tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8:
> PASS (21.23 s)
> tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv9:
> PASS (22.58 s)
>
> Other ppc machines, like pseries, also had a noticeable performance
> boost.
>
> ----------------------------------------------------------------
> BALATON Zoltan (8):
> ppc440_uc.c: Move DDR2 SDRAM controller model to ppc4xx_sdram.c
> ppc4xx_devs.c: Move DDR SDRAM controller model to ppc4xx_sdram.c
> ppc4xx_sdram: Move ppc4xx_sdram_banks() to ppc4xx_sdram.c
> ppc4xx_sdram: Use hwaddr for memory bank size
> ppc4xx_sdram: Rename local state variable for brevity
> ppc4xx_sdram: Generalise bank setup
> ppc4xx_sdram: Convert DDR SDRAM controller to new bank handling
> ppc4xx_sdram: Add errp parameter to ppc4xx_sdram_banks()
>
> Bernhard Beschow (5):
> docs/system/ppc/ppce500: Use qemu-system-ppc64 across the board(s)
> hw/block/pflash_cfi0{1, 2}: Error out if device length isn't a power of two
> hw/sd/sdhci-internal: Unexport ESDHC defines
> hw/sd/sdhci: Rename ESDHC_* defines to USDHC_*
> hw/ppc/e500: Implement pflash handling
>
> Leandro Lupori (2):
> target/ppc: Add new PMC HFLAGS
> target/ppc: Increment PMC5 with inline insns
>
> Lucas Mateus Castro (alqotel) (12):
> target/ppc: Moved VMLADDUHM to decodetree and use gvec
> target/ppc: Move VMH[R]ADDSHS instruction to decodetree
> target/ppc: Move V(ADD|SUB)CUW to decodetree and use gvec
> target/ppc: Move VNEG[WD] to decodtree and use gvec
> target/ppc: Move VPRTYB[WDQ] to decodetree and use gvec
> target/ppc: Move VAVG[SU][BHW] to decodetree and use gvec
> target/ppc: Move VABSDU[BHW] to decodetree and use gvec
> target/ppc: Use gvec to decode XV[N]ABS[DS]P/XVNEG[DS]P
> target/ppc: Use gvec to decode XVCPSGN[SD]P
> target/ppc: Moved XVTSTDC[DS]P to decodetree
> target/ppc: Moved XSTSTDC[QDS]P to decodetree
> target/ppc: Use gvec to decode XVTSTDC[DS]P
>
> Matheus Ferst (35):
> target/ppc: fix msgclr/msgsnd insns flags
> target/ppc: fix msgsync insns flags
> target/ppc: fix REQUIRE_HV macro definition
> target/ppc: move msgclr/msgsnd to decodetree
> target/ppc: move msgclrp/msgsndp to decodetree
> target/ppc: move msgsync to decodetree
> target/ppc: define PPC_INTERRUPT_* values directly
> target/ppc: always use ppc_set_irq to set env->pending_interrupts
> target/ppc: split interrupt masking and delivery from ppc_hw_interrupt
> target/ppc: prepare to split interrupt masking and delivery by excp_model
> target/ppc: create an interrupt masking method for POWER9/POWER10
> target/ppc: remove unused interrupts from p9_next_unmasked_interrupt
> target/ppc: create an interrupt deliver method for POWER9/POWER10
> target/ppc: remove unused interrupts from p9_deliver_interrupt
> target/ppc: remove generic architecture checks from p9_deliver_interrupt
> target/ppc: move power-saving interrupt masking out of cpu_has_work_POWER9
> target/ppc: add power-saving interrupt masking logic to p9_next_unmasked_interrupt
> target/ppc: create an interrupt masking method for POWER8
> target/ppc: remove unused interrupts from p8_next_unmasked_interrupt
> target/ppc: create an interrupt deliver method for POWER8
> target/ppc: remove unused interrupts from p8_deliver_interrupt
> target/ppc: remove generic architecture checks from p8_deliver_interrupt
> target/ppc: move power-saving interrupt masking out of cpu_has_work_POWER8
> target/ppc: add power-saving interrupt masking logic to p8_next_unmasked_interrupt
> target/ppc: create an interrupt masking method for POWER7
> target/ppc: remove unused interrupts from p7_next_unmasked_interrupt
> target/ppc: create an interrupt deliver method for POWER7
> target/ppc: remove unused interrupts from p7_deliver_interrupt
> target/ppc: remove generic architecture checks from p7_deliver_interrupt
> target/ppc: move power-saving interrupt masking out of cpu_has_work_POWER7
> target/ppc: add power-saving interrupt masking logic to p7_next_unmasked_interrupt
> target/ppc: remove ppc_store_lpcr from CONFIG_USER_ONLY builds
> target/ppc: introduce ppc_maybe_interrupt
> target/ppc: unify cpu->has_work based on cs->interrupt_request
> target/ppc: move the p*_interrupt_powersave methods to excp_helper.c
>
> docs/system/ppc/ppce500.rst | 25 +-
> hw/block/pflash_cfi01.c | 8 +-
> hw/block/pflash_cfi02.c | 5 +
> hw/ppc/Kconfig | 1 +
> hw/ppc/e500.c | 79 +++
> hw/ppc/meson.build | 3 +-
> hw/ppc/pnv_core.c | 1 +
> hw/ppc/ppc.c | 17 +-
> hw/ppc/ppc440_uc.c | 332 ----------
> hw/ppc/ppc4xx_devs.c | 414 ------------
> hw/ppc/ppc4xx_sdram.c | 757 ++++++++++++++++++++++
> hw/ppc/spapr_hcall.c | 6 +
> hw/ppc/spapr_rtas.c | 2 +-
> hw/ppc/trace-events | 3 +-
> hw/sd/sdhci-internal.h | 20 -
> hw/sd/sdhci.c | 63 +-
> include/hw/ppc/ppc4xx.h | 20 +-
> target/ppc/cpu.c | 4 +
> target/ppc/cpu.h | 47 +-
> target/ppc/cpu_init.c | 212 +-----
> target/ppc/excp_helper.c | 863 ++++++++++++++++++++++---
> target/ppc/fpu_helper.c | 137 ++--
> target/ppc/helper.h | 44 +-
> target/ppc/helper_regs.c | 8 +
> target/ppc/insn32.decode | 58 ++
> target/ppc/int_helper.c | 107 +--
> target/ppc/misc_helper.c | 11 +-
> target/ppc/power8-pmu.c | 74 +--
> target/ppc/power8-pmu.h | 3 +
> target/ppc/translate.c | 130 ++--
> target/ppc/translate/processor-ctrl-impl.c.inc | 105 +++
> target/ppc/translate/vmx-impl.c.inc | 352 ++++++++--
> target/ppc/translate/vmx-ops.c.inc | 15 +-
> target/ppc/translate/vsx-impl.c.inc | 375 +++++++++--
> target/ppc/translate/vsx-ops.c.inc | 21 -
> 35 files changed, 2715 insertions(+), 1607 deletions(-)
> create mode 100644 hw/ppc/ppc4xx_sdram.c
> create mode 100644 target/ppc/translate/processor-ctrl-impl.c.inc