Am 16. Oktober 2022 12:27:28 UTC schrieb Bernhard Beschow <shentey@gmail.com>:
>Cover letter:
>
>~~~~~~~~~~~~~
>
>
>
>This series adds support for -pflash and direct SD card access to the
>
>PPC e500 boards. The idea is to increase compatibility with "real" firmware
>
>images where only the bare minimum of drivers is compiled in.
>
>
>
>The series is structured as follows:
>
>
>
>Patches 1-6 perform some general cleanup which paves the way for the rest of
>
>the series.
>
>
>
>Patch 7 adds -pflash handling where memory-mapped flash can be added on
>
>user's behalf. That is, the flash memory region in the eLBC is only added if
>
>the -pflash argument is supplied. Note that the cfi01 device model becomes
>
>stricter in checking the size of the emulated flash space.
>
>
>
>Patches 8 and 9 add a new device model - the Freescale eSDHC - to the e500
>
>boards which was missing so far.
>
>
>
>User documentation is also added as the new features become available.
>
>
>
>Tesing done:
>
>* `qemu-system-ppc -M ppce500 -cpu e500mc -m 256 -kernel uImage -append
>
>"console=ttyS0 rootwait root=/dev/mtdblock0 nokaslr" -drive
>
>if=pflash,file=rootfs.ext2,format=raw`
>
>* `qemu-system-ppc -M ppce500 -cpu e500mc -m 256 -kernel uImage -append
>
>"console=ttyS0 rootwait root=/dev/mmcblk0" -device sd-card,drive=mydrive -drive
>
>id=mydrive,if=none,file=rootfs.ext2,format=raw`
>
>
>
>The load was created using latest Buildroot with `make
>
>qemu_ppc_e500mc_defconfig` where the rootfs was configured to be of ext2 type.
>
>In both cases it was possible to log in and explore the root file system.
>
>
>
>v3:
>
>~~~
>
>Phil:
>
>- Also add power-of-2 fix to pflash_cfi02
>
>- Resolve cfi01-specific assertion in e500 code
>
>- Resolve unused define in eSDHC device model
>
>- Resolve redundant alignment checks in eSDHC device model
>
>
>
>Bin:
>
>- Add dedicated flash chapter to documentation
>
>
>
>Bernhard:
>
>- Use is_power_of_2() instead of ctpop64() for better readability
>
>- Only instantiate eSDHC device model in ppce500 (not used in MPC8544DS)
>
>- Rebase onto gitlab.com/danielhb/qemu/tree/ppc-next
- Move cfi0x memory region setup into board code to avoid cfi01-specific assertion there
- While at it, resolve unreachable code related to cfi01 device creation
- Reorder patches such that trivial patches come first
Best regards,
Bernhard
>
>
>
>v2:
>
>~~~
>
>Bin:
>
>- Add source for MPC8544DS platform bus' memory map in commit message.
>
>- Keep "ESDHC" in comment referring to Linux driver.
>
>- Use "qemu-system-ppc{64|32} in documentation.
>
>- Use g_autofree in device tree code.
>
>- Remove unneeded device tree properties.
>
>- Error out if pflash size doesn't fit into eLBC memory window.
>
>- Remove unused ESDHC defines.
>
>- Define macro ESDHC_WML for register offset with magic constant.
>
>- Fix some whitespace issues when adding eSDHC device to e500.
>
>
>
>Phil:
>
>- Fix tense in commit message.
>
>
>
>Bernhard Beschow (9):
>
> hw/block/pflash_cfi0{1,2}: Error out if device length isn't a power of
>
> two
>
> hw/{arm,ppc}: Resolve unreachable code
>
> hw/block/pflash_cfi01: Attach memory region in boards
>
> hw/block/pflash_cfi02: Attach memory region in boards
>
> hw/sd/sdhci-internal: Unexport ESDHC defines
>
> hw/sd/sdhci: Rename ESDHC_* defines to USDHC_*
>
> hw/ppc/e500: Implement pflash handling
>
> hw/sd/sdhci: Implement Freescale eSDHC device model
>
> hw/ppc/e500: Add Freescale eSDHC to e500plat
>
>
>
> docs/system/ppc/ppce500.rst | 28 ++++
>
> hw/arm/collie.c | 20 ++-
>
> hw/arm/digic_boards.c | 16 +-
>
> hw/arm/gumstix.c | 24 +--
>
> hw/arm/mainstone.c | 15 +-
>
> hw/arm/musicpal.c | 15 +-
>
> hw/arm/omap_sx1.c | 25 ++--
>
> hw/arm/versatilepb.c | 14 +-
>
> hw/arm/xilinx_zynq.c | 12 +-
>
> hw/arm/z2.c | 12 +-
>
> hw/block/pflash_cfi01.c | 12 +-
>
> hw/block/pflash_cfi02.c | 14 +-
>
> hw/microblaze/petalogix_ml605_mmu.c | 16 +-
>
> hw/microblaze/petalogix_s3adsp1800_mmu.c | 10 +-
>
> hw/mips/malta.c | 4 +-
>
> hw/ppc/Kconfig | 2 +
>
> hw/ppc/e500.c | 97 +++++++++++-
>
> hw/ppc/e500.h | 1 +
>
> hw/ppc/e500plat.c | 1 +
>
> hw/ppc/sam460ex.c | 19 ++-
>
> hw/ppc/virtex_ml507.c | 5 +-
>
> hw/sd/sdhci-internal.h | 20 ---
>
> hw/sd/sdhci.c | 183 ++++++++++++++++++++---
>
> hw/sh4/r2d.c | 11 +-
>
> include/hw/block/flash.h | 7 +-
>
> include/hw/sd/sdhci.h | 3 +
>
> 26 files changed, 433 insertions(+), 153 deletions(-)
>
>
>
>-- >
>2.38.0
>
>
>