EmbeddedPkg/GdbStub/GdbStubInternal.h | 32 ++++++++++++------------ EmbeddedPkg/Include/Protocol/UsbDevice.h | 2 +- 2 files changed, 17 insertions(+), 17 deletions(-)
It would cause compiler error.
Signed-off-by: SteveX Li <stevex.li@intel.com>
---
EmbeddedPkg/GdbStub/GdbStubInternal.h | 32 ++++++++++++------------
EmbeddedPkg/Include/Protocol/UsbDevice.h | 2 +-
2 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/EmbeddedPkg/GdbStub/GdbStubInternal.h b/EmbeddedPkg/GdbStub/GdbStubInternal.h
index 9c3929c812..5eaff61d83 100644
--- a/EmbeddedPkg/GdbStub/GdbStubInternal.h
+++ b/EmbeddedPkg/GdbStub/GdbStubInternal.h
@@ -322,7 +322,7 @@ SendNotSupported (
VOID
);
-/** ‘p n’
+/** 'p n'
Reads the n-th register's value into an output buffer and sends it as a packet
@param SystemContext Register content at time of the exception
@param InBuffer This is the input buffer received from gdb server
@@ -333,7 +333,7 @@ ReadNthRegister (
IN CHAR8 *InBuffer
);
-/** ‘g’
+/** 'g'
Reads the general registers into an output buffer and sends it as a packet
@param SystemContext Register content at time of the exception
**/
@@ -343,7 +343,7 @@ ReadGeneralRegisters (
IN EFI_SYSTEM_CONTEXT SystemContext
);
-/** ‘P n...=r...’
+/** 'P n...=r...'
Writes the new value of n-th register received into the input buffer to the n-th register
@param SystemContext Register content at time of the exception
@param InBuffer This is the input buffer received from gdb server
@@ -355,7 +355,7 @@ WriteNthRegister (
IN CHAR8 *InBuffer
);
-/** ‘G XX...’
+/** 'G XX...'
Writes the new values received into the input buffer to the general registers
@param SystemContext Register content at time of the exception
@param InBuffer Pointer to the input buffer received from gdb server
@@ -368,7 +368,7 @@ WriteGeneralRegisters (
IN CHAR8 *InBuffer
);
-/** ‘m addr,length ’
+/** 'm addr,length '
Find the Length of the area to read and the start address. Finally, pass them to
another function, TransferFromMemToOutBufAndSend, that will read from that memory space and
send it as a packet.
@@ -381,7 +381,7 @@ ReadFromMemory (
IN CHAR8 *PacketData
);
-/** ‘M addr,length :XX...’
+/** 'M addr,length :XX...'
Find the Length of the area in bytes to write and the start address. Finally, pass them to
another function, TransferFromInBufToMem, that will write to that memory space the info in
the input buffer.
@@ -394,7 +394,7 @@ WriteToMemory (
IN CHAR8 *PacketData
);
-/** ‘c [addr ]’
+/** 'c [addr ]'
Continue. addr is Address to resume. If addr is omitted, resume at current
Address.
@@ -409,7 +409,7 @@ ContinueAtAddress (
IN CHAR8 *PacketData
);
-/** ‘s [addr ]’
+/** 's [addr ]'
Single step. addr is the Address at which to resume. If addr is omitted, resume
at same Address.
@@ -444,10 +444,10 @@ RemoveSingleStep (
);
/**
- ‘Z1, [addr], [length]’
- ‘Z2, [addr], [length]’
- ‘Z3, [addr], [length]’
- ‘Z4, [addr], [length]’
+ 'Z1, [addr], [length]'
+ 'Z2, [addr], [length]'
+ 'Z3, [addr], [length]'
+ 'Z4, [addr], [length]'
Insert hardware breakpoint/watchpoint at address addr of size length
@@ -463,10 +463,10 @@ InsertBreakPoint (
);
/**
- ‘z1, [addr], [length]’
- ‘z2, [addr], [length]’
- ‘z3, [addr], [length]’
- ‘z4, [addr], [length]’
+ 'z1, [addr], [length]'
+ 'z2, [addr], [length]'
+ 'z3, [addr], [length]'
+ 'z4, [addr], [length]'
Remove hardware breakpoint/watchpoint at address addr of size length
diff --git a/EmbeddedPkg/Include/Protocol/UsbDevice.h b/EmbeddedPkg/Include/Protocol/UsbDevice.h
index b299ee10a7..b07f459afa 100644
--- a/EmbeddedPkg/Include/Protocol/UsbDevice.h
+++ b/EmbeddedPkg/Include/Protocol/UsbDevice.h
@@ -83,7 +83,7 @@ EFI_STATUS
first interface descriptor. If there are
additional interfaces, their interface
descriptor and endpoint descriptors follow the
- first interface’s endpoint descriptors".
+ first interface's endpoint descriptors".
The size of each buffer is the TotalLength
member of the Configuration Descriptor.
--
2.31.1.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#95154): https://edk2.groups.io/g/devel/message/95154
Mute This Topic: https://groups.io/mt/94305923/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
© 2016 - 2024 Red Hat, Inc.