MdePkg/Library/BaseDebugLibNull/DebugLib.c | 28 +++++++++---------- .../Library/BaseDebugLibSerialPort/DebugLib.c | 28 +++++++++---------- .../BaseDebugPrintErrorLevelLib.c | 4 +-- MdePkg/Library/BaseLib/X64/Thunk16.nasm | 2 +- MdePkg/Library/BasePciCf8Lib/PciCf8Lib.c | 4 +-- .../Library/BasePciExpressLib/PciExpressLib.c | 4 +-- MdePkg/Library/BasePciLibCf8/PciLib.c | 4 +-- MdePkg/Library/BasePciLibPciExpress/PciLib.c | 4 +-- .../BasePciSegmentLibPci/PciSegmentLib.c | 4 +-- .../BasePeCoffLib/Arm/PeCoffLoaderEx.c | 4 +-- .../Library/BasePostCodeLibDebug/PostCode.c | 8 +++--- .../Library/BasePostCodeLibPort80/PostCode.c | 8 +++--- .../BaseReportStatusCodeLib.c | 18 ++++++------ MdePkg/Library/BaseS3PciLib/S3PciLib.c | 4 +-- .../BaseS3PciSegmentLib/S3PciSegmentLib.c | 4 +-- .../BaseUefiDecompressLib.c | 2 +- .../DxeRuntimeDebugLibSerialPort/DebugLib.c | 28 +++++++++---------- .../PostCode.c | 8 +++--- MdePkg/Library/PeiPciLibPciCfg2/PciLib.c | 4 +-- .../PeiPciSegmentLibPciCfg2/PciSegmentLib.c | 4 +-- MdePkg/Library/UefiDebugLibConOut/DebugLib.c | 28 +++++++++---------- .../UefiDebugLibDebugPortProtocol/DebugLib.c | 28 +++++++++---------- MdePkg/Library/UefiDebugLibStdErr/DebugLib.c | 28 +++++++++---------- .../UefiFileHandleLib/UefiFileHandleLib.c | 2 +- .../UefiPciLibPciRootBridgeIo/PciLib.c | 4 +-- .../PciSegmentLib.c | 4 +-- 26 files changed, 134 insertions(+), 134 deletions(-)
addres->address
orignal->original
Propery->Property
StartAdress->StartAddress
sucessfully->successfully
uinstance->instance
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Signed-off-by: Giri Mudusuru <girim@apple.com>
---
MdePkg/Library/BaseDebugLibNull/DebugLib.c | 28 +++++++++----------
.../Library/BaseDebugLibSerialPort/DebugLib.c | 28 +++++++++----------
.../BaseDebugPrintErrorLevelLib.c | 4 +--
MdePkg/Library/BaseLib/X64/Thunk16.nasm | 2 +-
MdePkg/Library/BasePciCf8Lib/PciCf8Lib.c | 4 +--
.../Library/BasePciExpressLib/PciExpressLib.c | 4 +--
MdePkg/Library/BasePciLibCf8/PciLib.c | 4 +--
MdePkg/Library/BasePciLibPciExpress/PciLib.c | 4 +--
.../BasePciSegmentLibPci/PciSegmentLib.c | 4 +--
.../BasePeCoffLib/Arm/PeCoffLoaderEx.c | 4 +--
.../Library/BasePostCodeLibDebug/PostCode.c | 8 +++---
.../Library/BasePostCodeLibPort80/PostCode.c | 8 +++---
.../BaseReportStatusCodeLib.c | 18 ++++++------
MdePkg/Library/BaseS3PciLib/S3PciLib.c | 4 +--
.../BaseS3PciSegmentLib/S3PciSegmentLib.c | 4 +--
.../BaseUefiDecompressLib.c | 2 +-
.../DxeRuntimeDebugLibSerialPort/DebugLib.c | 28 +++++++++----------
.../PostCode.c | 8 +++---
MdePkg/Library/PeiPciLibPciCfg2/PciLib.c | 4 +--
.../PeiPciSegmentLibPciCfg2/PciSegmentLib.c | 4 +--
MdePkg/Library/UefiDebugLibConOut/DebugLib.c | 28 +++++++++----------
.../UefiDebugLibDebugPortProtocol/DebugLib.c | 28 +++++++++----------
MdePkg/Library/UefiDebugLibStdErr/DebugLib.c | 28 +++++++++----------
.../UefiFileHandleLib/UefiFileHandleLib.c | 2 +-
.../UefiPciLibPciRootBridgeIo/PciLib.c | 4 +--
.../PciSegmentLib.c | 4 +--
26 files changed, 134 insertions(+), 134 deletions(-)
diff --git a/MdePkg/Library/BaseDebugLibNull/DebugLib.c b/MdePkg/Library/BaseDebugLibNull/DebugLib.c
index e01a095781..922857904d 100644
--- a/MdePkg/Library/BaseDebugLibNull/DebugLib.c
+++ b/MdePkg/Library/BaseDebugLibNull/DebugLib.c
@@ -92,8 +92,8 @@ DebugBPrint (
Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"
to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
- PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if
- DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then
+ PcdDebugPropertyMask is set then CpuBreakpoint() is called. Otherwise, if
+ DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugPropertyMask is set then
CpuDeadLoop() is called. If neither of these bits are set, then this function
returns immediately after the message is printed to the debug output device.
DebugAssert() must actively prevent recursion. If DebugAssert() is called while
@@ -146,10 +146,10 @@ DebugClearMemory (
Returns TRUE if ASSERT() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -165,10 +165,10 @@ DebugAssertEnabled (
Returns TRUE if DEBUG() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -184,10 +184,10 @@ DebugPrintEnabled (
Returns TRUE if DEBUG_CODE() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -203,10 +203,10 @@ DebugCodeEnabled (
Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.
This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
diff --git a/MdePkg/Library/BaseDebugLibSerialPort/DebugLib.c b/MdePkg/Library/BaseDebugLibSerialPort/DebugLib.c
index bd56869477..695d965ebc 100644
--- a/MdePkg/Library/BaseDebugLibSerialPort/DebugLib.c
+++ b/MdePkg/Library/BaseDebugLibSerialPort/DebugLib.c
@@ -191,8 +191,8 @@ DebugBPrint (
Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"
to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
- PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if
- DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then
+ PcdDebugPropertyMask is set then CpuBreakpoint() is called. Otherwise, if
+ DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugPropertyMask is set then
CpuDeadLoop() is called. If neither of these bits are set, then this function
returns immediately after the message is printed to the debug output device.
DebugAssert() must actively prevent recursion. If DebugAssert() is called while
@@ -273,10 +273,10 @@ DebugClearMemory (
Returns TRUE if ASSERT() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -292,10 +292,10 @@ DebugAssertEnabled (
Returns TRUE if DEBUG() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -311,10 +311,10 @@ DebugPrintEnabled (
Returns TRUE if DEBUG_CODE() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -330,10 +330,10 @@ DebugCodeEnabled (
Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.
This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
diff --git a/MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.c b/MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.c
index 5a43135d27..5d32720c3c 100644
--- a/MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.c
+++ b/MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.c
@@ -35,7 +35,7 @@ GetDebugPrintErrorLevel (
@param ErrorLevel Global debug print error level.
- @retval TRUE The debug print error level mask was sucessfully set.
+ @retval TRUE The debug print error level mask was successfully set.
@retval FALSE The debug print error level mask could not be set.
**/
@@ -46,7 +46,7 @@ SetDebugPrintErrorLevel (
)
{
//
- // This library uinstance does not support setting the global debug print error
+ // This library instance does not support setting the global debug print error
// level mask.
//
return FALSE;
diff --git a/MdePkg/Library/BaseLib/X64/Thunk16.nasm b/MdePkg/Library/BaseLib/X64/Thunk16.nasm
index e83b31c594..b788259d56 100644
--- a/MdePkg/Library/BaseLib/X64/Thunk16.nasm
+++ b/MdePkg/Library/BaseLib/X64/Thunk16.nasm
@@ -274,7 +274,7 @@ BITS 64
inc rcx ; rcx <- the size of memory to copy
xchg rdi, r11 ; save rdi to r11 and initialize rdi to the base address of shadowed GDT table
rep movsb ; perform memory copy to shadow GDT table
- mov rcx, r10 ; restore the orignal rcx before memory copy
+ mov rcx, r10 ; restore the original rcx before memory copy
mov rdi, r11 ; restore the original rdi before memory copy
sidt [rsp + 50h] ; save IDT stack in argument space
diff --git a/MdePkg/Library/BasePciCf8Lib/PciCf8Lib.c b/MdePkg/Library/BasePciCf8Lib/PciCf8Lib.c
index 0d9667178f..de9b7d78a5 100644
--- a/MdePkg/Library/BasePciCf8Lib/PciCf8Lib.c
+++ b/MdePkg/Library/BasePciCf8Lib/PciCf8Lib.c
@@ -1585,7 +1585,7 @@ PciCf8BitFieldAndThenOr32 (
Size into the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be read. Size is
returned. When possible 32-bit PCI configuration read cycles are used to read
- from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
and 16-bit PCI configuration read cycles may be used at the beginning and the
end of the range.
@@ -1685,7 +1685,7 @@ PciCf8ReadBuffer (
Size from the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be written. Size is
returned. When possible 32-bit PCI configuration write cycles are used to
- write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ write from StartAddress to StartAddress + Size. Due to alignment restrictions,
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
and the end of the range.
diff --git a/MdePkg/Library/BasePciExpressLib/PciExpressLib.c b/MdePkg/Library/BasePciExpressLib/PciExpressLib.c
index df937ec1fb..8f3f2a01e4 100644
--- a/MdePkg/Library/BasePciExpressLib/PciExpressLib.c
+++ b/MdePkg/Library/BasePciExpressLib/PciExpressLib.c
@@ -1392,7 +1392,7 @@ PciExpressBitFieldAndThenOr32 (
Size into the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be read. Size is
returned. When possible 32-bit PCI configuration read cycles are used to read
- from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
and 16-bit PCI configuration read cycles may be used at the beginning and the
end of the range.
@@ -1497,7 +1497,7 @@ PciExpressReadBuffer (
Size from the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be written. Size is
returned. When possible 32-bit PCI configuration write cycles are used to
- write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ write from StartAddress to StartAddress + Size. Due to alignment restrictions,
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
and the end of the range.
diff --git a/MdePkg/Library/BasePciLibCf8/PciLib.c b/MdePkg/Library/BasePciLibCf8/PciLib.c
index 74cece0fca..51b0fc0455 100644
--- a/MdePkg/Library/BasePciLibCf8/PciLib.c
+++ b/MdePkg/Library/BasePciLibCf8/PciLib.c
@@ -1068,7 +1068,7 @@ PciBitFieldAndThenOr32 (
Size into the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be read. Size is
returned. When possible 32-bit PCI configuration read cycles are used to read
- from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
and 16-bit PCI configuration read cycles may be used at the beginning and the
end of the range.
@@ -1103,7 +1103,7 @@ PciReadBuffer (
Size from the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be written. Size is
returned. When possible 32-bit PCI configuration write cycles are used to
- write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ write from StartAddress to StartAddress + Size. Due to alignment restrictions,
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
and the end of the range.
diff --git a/MdePkg/Library/BasePciLibPciExpress/PciLib.c b/MdePkg/Library/BasePciLibPciExpress/PciLib.c
index 1f037f717a..78210e049d 100644
--- a/MdePkg/Library/BasePciLibPciExpress/PciLib.c
+++ b/MdePkg/Library/BasePciLibPciExpress/PciLib.c
@@ -1068,7 +1068,7 @@ PciBitFieldAndThenOr32 (
Size into the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be read. Size is
returned. When possible 32-bit PCI configuration read cycles are used to read
- from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
and 16-bit PCI configuration read cycles may be used at the beginning and the
end of the range.
@@ -1103,7 +1103,7 @@ PciReadBuffer (
Size from the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be written. Size is
returned. When possible 32-bit PCI configuration write cycles are used to
- write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ write from StartAddress to StartAddress + Size. Due to alignment restrictions,
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
and the end of the range.
diff --git a/MdePkg/Library/BasePciSegmentLibPci/PciSegmentLib.c b/MdePkg/Library/BasePciSegmentLibPci/PciSegmentLib.c
index 5946bdc3f5..b12e08e54d 100644
--- a/MdePkg/Library/BasePciSegmentLibPci/PciSegmentLib.c
+++ b/MdePkg/Library/BasePciSegmentLibPci/PciSegmentLib.c
@@ -1094,7 +1094,7 @@ PciSegmentBitFieldAndThenOr32 (
Size into the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be read. Size is
returned. When possible 32-bit PCI configuration read cycles are used to read
- from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
and 16-bit PCI configuration read cycles may be used at the beginning and the
end of the range.
@@ -1192,7 +1192,7 @@ PciSegmentReadBuffer (
Size from the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be written. Size is
returned. When possible 32-bit PCI configuration write cycles are used to
- write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ write from StartAddress to StartAddress + Size. Due to alignment restrictions,
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
and the end of the range.
diff --git a/MdePkg/Library/BasePeCoffLib/Arm/PeCoffLoaderEx.c b/MdePkg/Library/BasePeCoffLib/Arm/PeCoffLoaderEx.c
index 595377bed6..01f0101edc 100644
--- a/MdePkg/Library/BasePeCoffLib/Arm/PeCoffLoaderEx.c
+++ b/MdePkg/Library/BasePeCoffLib/Arm/PeCoffLoaderEx.c
@@ -46,7 +46,7 @@ ThumbMovtImmediateAddress (
Update an ARM MOVT or MOVW immediate instruction immediate data.
@param Instruction Pointer to ARM MOVT or MOVW immediate instruction
- @param Address New addres to patch into the instruction
+ @param Address New address to patch into the instruction
**/
VOID
ThumbMovtImmediatePatch (
@@ -97,7 +97,7 @@ ThumbMovwMovtImmediateAddress (
Update an ARM MOVW/MOVT immediate instruction instruction pair.
@param Instructions Pointer to ARM MOVW/MOVT instruction pair
- @param Address New addres to patch into the instructions
+ @param Address New address to patch into the instructions
**/
VOID
ThumbMovwMovtImmediatePatch (
diff --git a/MdePkg/Library/BasePostCodeLibDebug/PostCode.c b/MdePkg/Library/BasePostCodeLibDebug/PostCode.c
index 57a3bd6bff..cf6b9cecb6 100644
--- a/MdePkg/Library/BasePostCodeLibDebug/PostCode.c
+++ b/MdePkg/Library/BasePostCodeLibDebug/PostCode.c
@@ -82,9 +82,9 @@ PostCodeWithDescription (
bit of PcdPostCodePropertyMask is set. Otherwise FALSE is returned.
@retval TRUE The POST_CODE_PROPERTY_POST_CODE_ENABLED bit of
- PcdPostCodeProperyMask is set.
+ PcdPostCodePropertyMask is set.
@retval FALSE The POST_CODE_PROPERTY_POST_CODE_ENABLED bit of
- PcdPostCodeProperyMask is clear.
+ PcdPostCodePropertyMask is clear.
**/
BOOLEAN
@@ -103,9 +103,9 @@ PostCodeEnabled (
bit of PcdPostCodePropertyMask is set. Otherwise FALSE is returned.
@retval TRUE The POST_CODE_PROPERTY_POST_CODE_DESCRIPTION_ENABLED bit of
- PcdPostCodeProperyMask is set.
+ PcdPostCodePropertyMask is set.
@retval FALSE The POST_CODE_PROPERTY_POST_CODE_DESCRIPTION_ENABLED bit of
- PcdPostCodeProperyMask is clear.
+ PcdPostCodePropertyMask is clear.
**/
BOOLEAN
diff --git a/MdePkg/Library/BasePostCodeLibPort80/PostCode.c b/MdePkg/Library/BasePostCodeLibPort80/PostCode.c
index 306906a750..11b1875e3b 100644
--- a/MdePkg/Library/BasePostCodeLibPort80/PostCode.c
+++ b/MdePkg/Library/BasePostCodeLibPort80/PostCode.c
@@ -100,9 +100,9 @@ PostCodeWithDescription (
bit of PcdPostCodePropertyMask is set. Otherwise FALSE is returned.
@retval TRUE The POST_CODE_PROPERTY_POST_CODE_ENABLED bit of
- PcdPostCodeProperyMask is set.
+ PcdPostCodePropertyMask is set.
@retval FALSE The POST_CODE_PROPERTY_POST_CODE_ENABLED bit of
- PcdPostCodeProperyMask is clear.
+ PcdPostCodePropertyMask is clear.
**/
BOOLEAN
@@ -121,9 +121,9 @@ PostCodeEnabled (
bit of PcdPostCodePropertyMask is set. Otherwise FALSE is returned.
@retval TRUE The POST_CODE_PROPERTY_POST_CODE_DESCRIPTION_ENABLED bit of
- PcdPostCodeProperyMask is set.
+ PcdPostCodePropertyMask is set.
@retval FALSE The POST_CODE_PROPERTY_POST_CODE_DESCRIPTION_ENABLED bit of
- PcdPostCodeProperyMask is clear.
+ PcdPostCodePropertyMask is clear.
**/
BOOLEAN
diff --git a/MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLib.c b/MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLib.c
index a1506a73e3..d1d37097af 100644
--- a/MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLib.c
+++ b/MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLib.c
@@ -316,12 +316,12 @@ ReportStatusCodeEx (
Returns TRUE if status codes of type EFI_PROGRESS_CODE are enabled
This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED
- bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.
+ bit of PcdReportStatusCodePropertyMask is set. Otherwise FALSE is returned.
@retval TRUE The REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is set.
+ PcdReportStatusCodePropertyMask is set.
@retval FALSE The REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is clear.
+ PcdReportStatusCodePropertyMask is clear.
**/
BOOLEAN
@@ -337,12 +337,12 @@ ReportProgressCodeEnabled (
Returns TRUE if status codes of type EFI_ERROR_CODE are enabled
This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED
- bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.
+ bit of PcdReportStatusCodePropertyMask is set. Otherwise FALSE is returned.
@retval TRUE The REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is set.
+ PcdReportStatusCodePropertyMask is set.
@retval FALSE The REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is clear.
+ PcdReportStatusCodePropertyMask is clear.
**/
BOOLEAN
@@ -358,12 +358,12 @@ ReportErrorCodeEnabled (
Returns TRUE if status codes of type EFI_DEBUG_CODE are enabled
This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED
- bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.
+ bit of PcdReportStatusCodePropertyMask is set. Otherwise FALSE is returned.
@retval TRUE The REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is set.
+ PcdReportStatusCodePropertyMask is set.
@retval FALSE The REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is clear.
+ PcdReportStatusCodePropertyMask is clear.
**/
BOOLEAN
diff --git a/MdePkg/Library/BaseS3PciLib/S3PciLib.c b/MdePkg/Library/BaseS3PciLib/S3PciLib.c
index 6530d38da9..653560d317 100644
--- a/MdePkg/Library/BaseS3PciLib/S3PciLib.c
+++ b/MdePkg/Library/BaseS3PciLib/S3PciLib.c
@@ -1177,7 +1177,7 @@ S3PciBitFieldAndThenOr32 (
Size into the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be read. Size is
returned. When possible 32-bit PCI configuration read cycles are used to read
- from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
and 16-bit PCI configuration read cycles may be used at the beginning and the
end of the range.
@@ -1223,7 +1223,7 @@ S3PciReadBuffer (
Size from the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be written. Size is
returned. When possible 32-bit PCI configuration write cycles are used to
- write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ write from StartAddress to StartAddress + Size. Due to alignment restrictions,
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
and the end of the range.
diff --git a/MdePkg/Library/BaseS3PciSegmentLib/S3PciSegmentLib.c b/MdePkg/Library/BaseS3PciSegmentLib/S3PciSegmentLib.c
index 28a64c1899..4570c9bde3 100644
--- a/MdePkg/Library/BaseS3PciSegmentLib/S3PciSegmentLib.c
+++ b/MdePkg/Library/BaseS3PciSegmentLib/S3PciSegmentLib.c
@@ -1156,7 +1156,7 @@ S3PciSegmentBitFieldAndThenOr32 (
Size into the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be read. Size is
returned. When possible 32-bit PCI configuration read cycles are used to read
- from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
and 16-bit PCI configuration read cycles may be used at the beginning and the
end of the range.
@@ -1202,7 +1202,7 @@ S3PciSegmentReadBuffer (
Size from the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be written. Size is
returned. When possible 32-bit PCI configuration write cycles are used to
- write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ write from StartAddress to StartAddress + Size. Due to alignment restrictions,
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
and the end of the range.
diff --git a/MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.c b/MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.c
index 2f0a0c8c45..3100a07756 100644
--- a/MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.c
+++ b/MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.c
@@ -581,7 +581,7 @@ Decode (
goto Done;
} else {
//
- // Write orignal character into mDstBase
+ // Write original character into mDstBase
//
Sd->mDstBase[Sd->mOutBuf++] = (UINT8)CharC;
}
diff --git a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c
index 11d188d07f..a5a73cb30f 100644
--- a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c
+++ b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c
@@ -254,8 +254,8 @@ DebugBPrint (
Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"
to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
- PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if
- DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then
+ PcdDebugPropertyMask is set then CpuBreakpoint() is called. Otherwise, if
+ DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugPropertyMask is set then
CpuDeadLoop() is called. If neither of these bits are set, then this function
returns immediately after the message is printed to the debug output device.
DebugAssert() must actively prevent recursion. If DebugAssert() is called while
@@ -346,10 +346,10 @@ DebugClearMemory (
Returns TRUE if ASSERT() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -365,10 +365,10 @@ DebugAssertEnabled (
Returns TRUE if DEBUG() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -384,10 +384,10 @@ DebugPrintEnabled (
Returns TRUE if DEBUG_CODE() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -403,10 +403,10 @@ DebugCodeEnabled (
Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.
This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
diff --git a/MdePkg/Library/PeiDxePostCodeLibReportStatusCode/PostCode.c b/MdePkg/Library/PeiDxePostCodeLibReportStatusCode/PostCode.c
index bf2da0c0cf..4d30e2d15e 100644
--- a/MdePkg/Library/PeiDxePostCodeLibReportStatusCode/PostCode.c
+++ b/MdePkg/Library/PeiDxePostCodeLibReportStatusCode/PostCode.c
@@ -112,9 +112,9 @@ PostCodeWithDescription (
bit of PcdPostCodePropertyMask is set. Otherwise FALSE is returned.
@retval TRUE The POST_CODE_PROPERTY_POST_CODE_ENABLED bit of
- PcdPostCodeProperyMask is set.
+ PcdPostCodePropertyMask is set.
@retval FALSE The POST_CODE_PROPERTY_POST_CODE_ENABLED bit of
- PcdPostCodeProperyMask is clear.
+ PcdPostCodePropertyMask is clear.
**/
BOOLEAN
@@ -133,9 +133,9 @@ PostCodeEnabled (
bit of PcdPostCodePropertyMask is set. Otherwise FALSE is returned.
@retval TRUE The POST_CODE_PROPERTY_POST_CODE_DESCRIPTION_ENABLED bit of
- PcdPostCodeProperyMask is set.
+ PcdPostCodePropertyMask is set.
@retval FALSE The POST_CODE_PROPERTY_POST_CODE_DESCRIPTION_ENABLED bit of
- PcdPostCodeProperyMask is clear.
+ PcdPostCodePropertyMask is clear.
**/
BOOLEAN
diff --git a/MdePkg/Library/PeiPciLibPciCfg2/PciLib.c b/MdePkg/Library/PeiPciLibPciCfg2/PciLib.c
index 18823307e1..48197f4bf9 100644
--- a/MdePkg/Library/PeiPciLibPciCfg2/PciLib.c
+++ b/MdePkg/Library/PeiPciLibPciCfg2/PciLib.c
@@ -1226,7 +1226,7 @@ PciBitFieldAndThenOr32 (
Size into the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be read. Size is
returned. When possible 32-bit PCI configuration read cycles are used to read
- from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
and 16-bit PCI configuration read cycles may be used at the beginning and the
end of the range.
@@ -1324,7 +1324,7 @@ PciReadBuffer (
Size from the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be written. Size is
returned. When possible 32-bit PCI configuration write cycles are used to
- write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ write from StartAddress to StartAddress + Size. Due to alignment restrictions,
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
and the end of the range.
diff --git a/MdePkg/Library/PeiPciSegmentLibPciCfg2/PciSegmentLib.c b/MdePkg/Library/PeiPciSegmentLibPciCfg2/PciSegmentLib.c
index 80cddbefd3..5ae3a578e8 100644
--- a/MdePkg/Library/PeiPciSegmentLibPciCfg2/PciSegmentLib.c
+++ b/MdePkg/Library/PeiPciSegmentLibPciCfg2/PciSegmentLib.c
@@ -1217,7 +1217,7 @@ PciSegmentBitFieldAndThenOr32 (
Size into the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be read. Size is
returned. When possible 32-bit PCI configuration read cycles are used to read
- from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
and 16-bit PCI configuration read cycles may be used at the beginning and the
end of the range.
@@ -1315,7 +1315,7 @@ PciSegmentReadBuffer (
Size from the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be written. Size is
returned. When possible 32-bit PCI configuration write cycles are used to
- write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ write from StartAddress to StartAddress + Size. Due to alignment restrictions,
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
and the end of the range.
diff --git a/MdePkg/Library/UefiDebugLibConOut/DebugLib.c b/MdePkg/Library/UefiDebugLibConOut/DebugLib.c
index 65c8dc2b46..8f49da220b 100644
--- a/MdePkg/Library/UefiDebugLibConOut/DebugLib.c
+++ b/MdePkg/Library/UefiDebugLibConOut/DebugLib.c
@@ -177,8 +177,8 @@ DebugBPrint (
Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"
to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
- PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if
- DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then
+ PcdDebugPropertyMask is set then CpuBreakpoint() is called. Otherwise, if
+ DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugPropertyMask is set then
CpuDeadLoop() is called. If neither of these bits are set, then this function
returns immediately after the message is printed to the debug output device.
DebugAssert() must actively prevent recursion. If DebugAssert() is called while
@@ -273,10 +273,10 @@ DebugClearMemory (
Returns TRUE if ASSERT() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -292,10 +292,10 @@ DebugAssertEnabled (
Returns TRUE if DEBUG() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -311,10 +311,10 @@ DebugPrintEnabled (
Returns TRUE if DEBUG_CODE() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -330,10 +330,10 @@ DebugCodeEnabled (
Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.
This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
diff --git a/MdePkg/Library/UefiDebugLibDebugPortProtocol/DebugLib.c b/MdePkg/Library/UefiDebugLibDebugPortProtocol/DebugLib.c
index c25199b53f..3314d3f69a 100644
--- a/MdePkg/Library/UefiDebugLibDebugPortProtocol/DebugLib.c
+++ b/MdePkg/Library/UefiDebugLibDebugPortProtocol/DebugLib.c
@@ -233,8 +233,8 @@ DebugBPrint (
Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"
to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
- PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if
- DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then
+ PcdDebugPropertyMask is set then CpuBreakpoint() is called. Otherwise, if
+ DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugPropertyMask is set then
CpuDeadLoop() is called. If neither of these bits are set, then this function
returns immediately after the message is printed to the debug output device.
DebugAssert() must actively prevent recursion. If DebugAssert() is called while
@@ -327,10 +327,10 @@ DebugClearMemory (
Returns TRUE if ASSERT() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -346,10 +346,10 @@ DebugAssertEnabled (
Returns TRUE if DEBUG() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -365,10 +365,10 @@ DebugPrintEnabled (
Returns TRUE if DEBUG_CODE() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -384,10 +384,10 @@ DebugCodeEnabled (
Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.
This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
diff --git a/MdePkg/Library/UefiDebugLibStdErr/DebugLib.c b/MdePkg/Library/UefiDebugLibStdErr/DebugLib.c
index 5b28cd10ae..dc9c5254db 100644
--- a/MdePkg/Library/UefiDebugLibStdErr/DebugLib.c
+++ b/MdePkg/Library/UefiDebugLibStdErr/DebugLib.c
@@ -177,8 +177,8 @@ DebugBPrint (
Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"
to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
- PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if
- DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then
+ PcdDebugPropertyMask is set then CpuBreakpoint() is called. Otherwise, if
+ DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugPropertyMask is set then
CpuDeadLoop() is called. If neither of these bits are set, then this function
returns immediately after the message is printed to the debug output device.
DebugAssert() must actively prevent recursion. If DebugAssert() is called while
@@ -273,10 +273,10 @@ DebugClearMemory (
Returns TRUE if ASSERT() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -292,10 +292,10 @@ DebugAssertEnabled (
Returns TRUE if DEBUG() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -311,10 +311,10 @@ DebugPrintEnabled (
Returns TRUE if DEBUG_CODE() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
@@ -330,10 +330,10 @@ DebugCodeEnabled (
Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.
This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
+ PcdDebugPropertyMask is set. Otherwise FALSE is returned.
- @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.
+ @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugPropertyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugPropertyMask is clear.
**/
BOOLEAN
diff --git a/MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.c b/MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.c
index 86678e965d..cb0d345f3a 100644
--- a/MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.c
+++ b/MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.c
@@ -787,7 +787,7 @@ StrnCatGrowLeft (
@param[out] FullFileName pointer to pointer to generated full file name. It
is the responsibility of the caller to free this memory
with a call to FreePool().
- @retval EFI_SUCCESS the operation was sucessful and the FullFileName is valid.
+ @retval EFI_SUCCESS the operation was successful and the FullFileName is valid.
@retval EFI_INVALID_PARAMETER Handle was NULL.
@retval EFI_INVALID_PARAMETER FullFileName was NULL.
@retval EFI_OUT_OF_RESOURCES a memory allocation failed.
diff --git a/MdePkg/Library/UefiPciLibPciRootBridgeIo/PciLib.c b/MdePkg/Library/UefiPciLibPciRootBridgeIo/PciLib.c
index f4e9882eba..cc0f92dda1 100644
--- a/MdePkg/Library/UefiPciLibPciRootBridgeIo/PciLib.c
+++ b/MdePkg/Library/UefiPciLibPciRootBridgeIo/PciLib.c
@@ -1238,7 +1238,7 @@ PciBitFieldAndThenOr32 (
Size into the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be read. Size is
returned. When possible 32-bit PCI configuration read cycles are used to read
- from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
and 16-bit PCI configuration read cycles may be used at the beginning and the
end of the range.
@@ -1336,7 +1336,7 @@ PciReadBuffer (
Size from the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be written. Size is
returned. When possible 32-bit PCI configuration write cycles are used to
- write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ write from StartAddress to StartAddress + Size. Due to alignment restrictions,
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
and the end of the range.
diff --git a/MdePkg/Library/UefiPciSegmentLibPciRootBridgeIo/PciSegmentLib.c b/MdePkg/Library/UefiPciSegmentLibPciRootBridgeIo/PciSegmentLib.c
index c7988367cf..ad3e80f46d 100644
--- a/MdePkg/Library/UefiPciSegmentLibPciRootBridgeIo/PciSegmentLib.c
+++ b/MdePkg/Library/UefiPciSegmentLibPciRootBridgeIo/PciSegmentLib.c
@@ -1298,7 +1298,7 @@ PciSegmentBitFieldAndThenOr32 (
Size into the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be read. Size is
returned. When possible 32-bit PCI configuration read cycles are used to read
- from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
and 16-bit PCI configuration read cycles may be used at the beginning and the
end of the range.
@@ -1396,7 +1396,7 @@ PciSegmentReadBuffer (
Size from the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be written. Size is
returned. When possible 32-bit PCI configuration write cycles are used to
- write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ write from StartAddress to StartAddress + Size. Due to alignment restrictions,
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
and the end of the range.
--
2.39.2 (Apple Git-144)
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#104788): https://edk2.groups.io/g/devel/message/104788
Mute This Topic: https://groups.io/mt/98846369/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-© 2016 - 2024 Red Hat, Inc.