ReadMe.MD | 178 ++++++++------------------------------------------------------ 1 file changed, 21 insertions(+), 157 deletions(-)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Guo Mang <mang.guo@intel.com>
---
ReadMe.MD | 178 ++++++++------------------------------------------------------
1 file changed, 21 insertions(+), 157 deletions(-)
diff --git a/ReadMe.MD b/ReadMe.MD
index a42260e..3c35cbd 100644
--- a/ReadMe.MD
+++ b/ReadMe.MD
@@ -1,172 +1,37 @@
-
-This code base is designed for the MinnowBoard v3 platform using the Intel(R) Atom(tm) Processor E3900 Series.
-This code base is based on UDK2017 core packages.
+# MinnowBoard 3 and Leaf Hill CRB Platform
-# INDEX
+This codebase is designed for the MinnowBoard 3 platform and Leaf Hill Customer Reference Board (CRB), using the [Intel Atom(R) Processor E3900 Series](https://www.intel.com/content/www/us/en/embedded/products/apollo-lake/overview.html) (formerly Apollo Lake).
-1. HOW TO CREATE A FULL SOURCE TREE
-2. HOW TO BUILD (WINDOWS ENVIRONMENT)
-3. MAINTAINERS
+## Codebase Overview
-## 1. HOW TO CREATE A FULL SOURCE TREE
+This codebase is based on UDK2017 core packages, [Intel(R) Firmware Support Package](https://github.com/IntelFsp/FSP.git)
+(Intel(R) FSP), [UEFI UNDI driver](https://downloadcenter.intel.com/download/19186/Intel-Ethernet-Connections-Boot-Utility-Preboot-Images-and-EFI-Drivers)
+for Intel Ethernet Controllers, and pre-compiled binary objects required for the final Integrated Firmware Image (IFWI).
-1. Create a new folder (directory) on the root of your local development machine
- for use as your work space (this example uses "C:\MyWorkspace").
+Additional information on this project is available at [firmware.intel.com](https://firmware.intel.com/projects/minnowboard3).
- NOTE: Some code paths are very long, and placing the working directory too
- deep below the ROOT directory may cause the path to be longer than the
- operating system or file system's maximum path length.
+## Build Instructions
-2. Get MinnowBoard v3 branch from GitHub with the following command.
- * `git clone -b devel-MinnowBoard3-UDK2017 https://github.com/tianocore/edk2-platforms.git`
+Instructions for downloading a source tree and compiling firmware are available in the project release notes at [firmware.intel.com](https://firmware.intel.com/projects/minnowboard3):
+* https://firmware.intel.com/sites/default/files/MinnowBoard3-Rel_0_69-ReleaseNotes.txt
+* https://firmware.intel.com/sites/default/files/LeafHill-Rel_0_69-ReleaseNotes.txt
- Once the download completes, all EDK II packages and files will be found
- under the "C:\MyWorkspace\edk2-platforms" directory.
+*Note that Release 0.69 added a separate [release notes file for the Leaf Hill CRB](https://firmware.intel.com/sites/default/files/LeafHill-Rel_0_69-ReleaseNotes.txt). Instructions for downloading the Leaf Hill CRB source tree and compiling an IFWI image differ slightly from MinnowBoard 3.*
-3. Get the BaseTools binary and copy them to BaseTools binary folder.
- 1. `git clone https://github.com/tianocore/edk2-BaseTools-win32.git Win32`
- 2. Enter folder Win32
- 3. `git checkout 0e088c19ab31fccd1d2f55d9e4fe0314b57c0097`
- 4. Copy Win32 to the BaseTools Binary folder.
- (C:\MyWorkspace\edk2-platforms\BaseTools\Bin\)
+This project's build instructions have been validated in the following environments:
+* Microsoft Windows 7 Ultimate 64-bit & Microsoft Windows 10 Enterprise 64-bit with Microsoft Visual Studio 2013/2015
+* Ubuntu Linux 16.04.3.LTS with GCC 5
-4. Get the Intel(R) Firmware Support Package(Intel FSP).
- 1. Run `git clone -b ApolloLake https://github.com/IntelFsp/FSP.git` to download FSP
- 2. Enter folder FSP
- 3. Run `git checkout de67689ef6261c1a0ecee01b7312bd635e3435e7`
- 4. Copy the ApolloLakeFspBinPkg to the folder
- "C:\MyWorkspace\edk2-platforms\Silicon\BroxtonSoC\BroxtonFspPkg"
+## Pre-Compiled Firmware Images
-5. Install UEFI UNDI driver:
- Download PREBOOT.EXE Version 21.1 from the "Intel® Ethernet Connections
- Boot Utility, Preboot Images, and EFI Drivers" page.
- https://downloadcenter.intel.com/download/19186/Intel-Ethernet-Connections-Boot-Utility-Preboot-Images-and-EFI-Drivers
+Pre-compiled binary images are available at https://firmware.intel.com/projects/minnowboard3
- Windows user:
- 1. Install PREBOOT.EXE into the default folder (C:\Intel21.1).
- 2. Copy the UEFI x64 PCI-E gigabit driver (C:\Intel21.1\APPS\EFI\EFIx64\E7320X3.EFI)
- to the platform package directory below, create the folder if it does not exist:
- * "C:\MyWorkspace\edk2-platforms\Platform\BroxtonPlatformPkg\Common\Binaries\UNDI\I210PcieUndiDxe"
+This [project](https://firmware.intel.com/projects/minnowboard3) also includes IA32 & x64 'flash update' tools for the UEFI Shell (FirmwareUpdateUtilities).
+These utilities require the 'BIOS Lock' feature to be disabled. Please refer to the release notes for programming instructions.
- Linux user:
- 1. Use command "unzip PREBOOT.EXE" to extract UEFI x64 PCI-E gigabit driver
- (preboot/APPS/EFI/EFIx64/E7320X3.EFI)
- 2. Copy E7320X3.EFI to platform package directory below, create the folder
- if it does not exist:
- * "~/src/MyWorkspace/edk2-platforms/Platform/BroxtonPlatformPkg/Common/Binaries/UNDI/I210PcieUndiDxe"
+## Reporting Issues
-6. Follow the instructions found in the "Patch-HOWTO.txt" file located in the Workspace
- (e.g. "C:\MyWorkspace\edk2-platforms\Core\CryptoPkg\Library\OpensslLib\Patch-HOWTO.txt")
- to install the OpenSSL source code and enable the CryptoPkg module.
-
-7. Download MinnowBoard v3 Binary Object Modules
- 1. Download the "MinnowBoard_v3-0.63-Binary.Objects.zip" from the project page:
- * https://firmware.intel.com/projects/minnowboardv3
- 2. Unzip and copy the two folders (FAB_A, FAB_B) into
- the directory below, and create the folder if it does not exist:
- * "C:\MyWorkspace\edk2-platforms\Platform\BroxtonPlatformPkg\Common\Binaries\IFWI\MinnowBoard3"
-
-## 2. HOW TO BUILD (WINDOWS ENVIRONMENT)
-
-Windows System Configuration:
- - Microsoft Windows 7 Ultimate 64-bit*
-
-1. Setup Build Environment
-
- 1. Install Visual Studio 2013/2015 on the build machine.
-
- 2. Install version Python 2.7.10 from: https://www.python.org/downloads/release/python-2710/
- * Make sure that a file with the extension of ".py" will be opened by Python.exe.
-
- 3. Install the NASM assembly language compiler:
-
- a. Download NASM 2.12.02 binaries:
- * http://www.nasm.us/pub/nasm/releasebuilds/2.12.02/win32/nasm-2.12.02-win32.zip
- * http://www.nasm.us/pub/nasm/releasebuilds/2.12.02/win64/nasm-2.12.02-win64.zip
-
- b. Unzip the 32-bit & 64-bit versions of nasm.exe to the directories listed below,
- respectively, and create the folders if they do not exist:
- * "C:\MyWorkspace\edk2-platforms\Platform\BroxtonPlatformPkg\Common\Tools\nasm\Win32"
- * "C:\MyWorkspace\edk2-platforms\Platform\BroxtonPlatformPkg\Common\Tools\nasm\Win64"
-
- 4. Install the ACPI Source Language (ASL) compiler:
-
- a. Install the IASL 2016-09-30 compiler from acpica.org:
- https://acpica.org/sites/acpica/files/iasl-win-20160930.zip
-
- b. Unzip the "iasl.exe" file into the directory below, and create the folder
- if it does not exist:
- * "C:\MyWorkspace\edk2-platforms\Platform\BroxtonPlatformPkg\Common\Tools\Iasl"
-
-2. Build
-
- 2a. Build Steps (32-bit)
-
- 1. To build a 32-bit release version
- * Open a command prompt of Microsoft Visual Studio, such as "Developer Command Prompt for VS2013";
- * Type the command: `cd C:\MyWorkspace\edk2-platforms`
- * Type the command: `BuildBIOS.bat /B /VS13 /IA32 Broxton Release` to build a release version.
- (Please use "/VS15" flag for Visual Studio 2015 build; Replace "/B" with "/A" flag for MinnowBoard 3 FAB A board)
-
- 2. To build a 32-bit debug version
- * Open a command prompt of Microsoft Visual Studio, such as "Developer Command Prompt for VS2013";
- * Type the command: `cd C:\MyWorkspace\edk2-platforms`
- * Type the command: `BuildBIOS.bat /B /VS13 /IA32 Broxton Debug` to build a debug version.
- (Please use "/VS15" flag for Visual Studio 2015 build; Replace "/B" with "/A" flag for MinnowBoard 3 FAB A board)
-
- 3. After the build successfully completes, the 8MB firmware binary image will be located in the
- following location on your local hard drive:
-
- * "C:\MyWorkspace\edk2-platforms\Platform\BroxtonPlatformPkg\Common\Tools\Stitch"
-
- 2b. Build Steps (64-bit)
-
- 1. To build a 64-bit release version
- * Open a command prompt of Microsoft Visual Studio, such as "Developer Command Prompt for VS2013";
- * Type the command: `cd C:\MyWorkspace\edk2-platforms`
- * Type the command: `BuildBIOS.bat /B /VS13 /x64 Broxton Release` to build a release version.
- (Please use "/VS15" flag for Visual Studio 2015 build; Replace "/B" with "/A" flag for MinnowBoard 3 FAB A board)
-
- 2. To build a 64-bit debug version
- * Open a command prompt of Microsoft Visual Studio, such as "Developer Command Prompt for VS2013";
- * Type the command: `cd C:\MyWorkspace\edk2-platforms`
- * Type the command: `BuildBIOS.bat /B /VS13 /x64 Broxton Debug` to build a debug version.
- (Please use "/VS15" flag for Visual Studio 2015 build; Replace "/B" with "/A" flag for MinnowBoard 3 FAB A board)
-
- 3. After the build successfully completes, the 8MB firmware binary image will be located in the
- following location on your local hard drive:
-
- * "C:\MyWorkspace\edk2-platforms\Platform\BroxtonPlatformPkg\Common\Tools\Stitch"
-
-## 3. HOW TO BUILD (LINUX ENVIRONMENT)
-
-Linux System Configuration:
- - Ubuntu 16.04 64-bit
- - bash shell
- - gcc version 5 or above
-
-1. Setup Build Environment
- Use below command to install required packages:
- ```
- # sudo apt-get update
- # sudo apt-get install nasm
- # sudo apt-get install iasl
- # sudo apt-get install build-essential
- # sudo apt-get install uuid-dev
- ```
-2. Build Steps (64-bit)
- 1. To build a 64-bit release version
- * Open a command prompt, type command: `cd ~/src/MyWorkspace/edk2-platforms`;
- * For MinnowBoard 3 FAB B, type the command:`./BuildBIOS.sh /B Release` to build a release version.
- (Replace "/B" with "/A" for MinnowBoard 3 FAB A board)
- 2. To build a 64-bit debug version
- * Open a command prompt, type command: `cd ~/src/MyWorkspace/edk2-platforms`;
- * For MinnowBoard 3 FAB B, type the command:`./BuildBIOS.sh /B Debug` to build a debug version.
- (Replace "/B" with "/A" for MinnowBoard 3 FAB A board)
- 3. After the build successfully completes, the 8MB firmware binary image will be located in the
- following location on your local hard drive:
-
- * "~/src/MyWorkspace/edk2-platforms/Platform/BroxtonPlatformPkg/Common/Tools/Stitch/"
+To report issues on this codebase, please use [TianoCore Bugzilla](https://bugzilla.tianocore.org/). For more information, please refer to the [Reporting Issues](https://github.com/tianocore/tianocore.github.io/wiki/Reporting-Issues) entry on the [TianoCore wiki](https://github.com/tianocore/tianocore.github.io/wiki).
## MAINTAINERS
@@ -175,4 +40,3 @@ Linux System Configuration:
* vincent.zimmer@intel.com
* mike.wu@intel.com
* shifeix.a.lu@intel.com
-
--
2.10.1.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
© 2016 - 2024 Red Hat, Inc.