Platform/Marvell/Cn913xDb/Readme.md | 104 +++++++----------- Platform/SolidRun/Armada80x0McBin/Readme.md | 113 ++++++++------------ Platform/SolidRun/Cn913xCEx7Eval/Readme.md | 109 ++++++++----------- 3 files changed, 124 insertions(+), 202 deletions(-)
From: Grzegorz Bernacki <gjb@semihalf.com>
This patch reworks Readme.md files of Marvell and SolidRun
platforms as follows:
* Add supported features list.
* Leave minmal EDK2 build command.
* Add 'NOTE' box about INCLUDE_TFTP_COMMAND build flag.
* Move full firmware image build/burn howtos to external wiki pages.
* Add links and update paragraphs.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
In order to ease review/merge the patch is available in a public repository:
https://github.com/Semihalf/edk2-platforms/commits/marvell-howtos-upstream-r20220314
Platform/Marvell/Cn913xDb/Readme.md | 104 +++++++-----------
Platform/SolidRun/Armada80x0McBin/Readme.md | 113 ++++++++------------
Platform/SolidRun/Cn913xCEx7Eval/Readme.md | 109 ++++++++-----------
3 files changed, 124 insertions(+), 202 deletions(-)
diff --git a/Platform/Marvell/Cn913xDb/Readme.md b/Platform/Marvell/Cn913xDb/Readme.md
index ecdb78302b..0b2ab676f8 100644
--- a/Platform/Marvell/Cn913xDb/Readme.md
+++ b/Platform/Marvell/Cn913xDb/Readme.md
@@ -5,93 +5,65 @@
This is a port of 64-bit TianoCore EDK II firmware for the Marvell CN913x Development Board.
-# Building the firmware
-
-## Prepare toolchain (for cross-compilation only):
-
-1. Download the toolchain:
-
- ```
- wget https://releases.linaro.org/components/toolchain/binaries/7.5-2019.12/aarch64-linux-gnu/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu.tar.xz
- ```
+# Supported features
-1. After extracting, setup the path and compiler prefix to GCC5\_AARCH64\_PREFIX variable:
+Features supported in EDK2:
- ```
- export GCC5_AARCH64_PREFIX=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
- ```
+* 1x PCIE root complex
+* Networking:
+ * 3x 10 GbE via SFP+
+ * 2x 1 GbE RGMII via RJ45
+* 5x USB 2.0/3.0
+* 3x SATA
+* 2x uSD
+* 1x eMMC
+* RTC
+* SPI flash & memory-mapped variable storage access
+* I2C
+* GPIO
-## Prepare prerequisites
+Hardware description:
-1. Create a new folder (directory) on your local development machine
- for use as your workspace. This example uses `/work/git/tianocore`, modify as
- appropriate for your needs.
+* ACPI (default)
+* Device Tree
- ```
- $ export WORKSPACE=/work/git/tianocore
- $ mkdir -p $WORKSPACE
- $ cd $WORKSPACE
- ```
+Others:
-1. Clone the Trusted Firmware repository:
+* Signed capsule update
+* X64 option ROM emulator
- ```
- $ cd ${WORKSPACE}
- $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
- ```
-1. Clone repository for auxiliary firmware on the SoC co-processors and checkout to binaries-marvell-armada-SDK10.0.1.0:
-
- ```
- $ cd ${WORKSPACE}
- $ git clone https://github.com/MarvellEmbeddedProcessors/binaries-marvell.git
- $ cd binaries-marvell/
- $ git checkout -b binaries-marvell-armada-SDK10.0.1.0 origin/binaries-marvell-armada-SDK10.0.1.0
- ```
-1. Clone the DDR training code from:
+# Building the firmware
- ```
- $ cd ${WORKSPACE}
- $ git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
- ```
## Prepare EDKII environment:
-Please follow instructions from "Obtaining source code" and "Manual building" from the top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
+Please follow instructions from [Obtaining source code](https://github.com/tianocore/edk2-platforms#obtaining-source-code)
+and [Manual building](https://github.com/tianocore/edk2-platforms#manual-building) from the
+top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
## Build EDKII:
-1. Use below build command:
+Use below build command:
- ```
- $ cd ${WORKSPACE}
- $ build -a AARCH64 -t GCC5 -b RELEASE -D CN9132 -D INCLUDE_TFTP_COMMAND -D CAPSULE_ENABLE -p Platform/Marvell/Cn913xDb/Cn913xDbA.dsc
- ```
+ ```
+ $ build -a AARCH64 -t GCC5 -b RELEASE -D CN9132 -D CAPSULE_ENABLE -D X64EMU_ENABLE -p Platform/Marvell/Cn913xDb/Cn913xDbA.dsc
+ ```
-## Build the final firmware image:
+---
+**NOTE**
-1. Set BL33 variable to path to EDK II output binary:
+'-D INCLUDE_TFTP_COMMAND' is optional and can be added in order to enable `tftp` command in UEFI Shell.
- ```
- $ export BL33=${WORKSPACE}/Build/Cn9132DbA-AARCH64/RELEASE_GCC5/FV/ARMADA_EFI.fd
- ```
-1. Export SCP_BL2 variable:
+---
- ```
- $ export SCP_BL2=${WORKSKPACE}/binaries-marvell/mrvl_scp_bl2.img
- ```
-1. Export compiler variables (for cross-compilation only):
+## Build the final firmware image:
- ```
- $ export ARCH=arm64
- $ export CROSS_COMPILE=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
- ```
-1. Build the image:
+In addition to EDKII binary, the complete firmware image comprises the TF-A and other components.
+A complete build instruction can be found at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Build_firmware).
- ```
- $ cd ${WORKSPACE}/trusted-firmware-a/
- $ make LOG_LEVEL=20 MV_DDR_PATH=${WORKSPACE}/mv-ddr-marvell CP_NUM=3 PLAT=t9130 all fip mrvl_flash
+## Burning the firmware
- ```
-The firmware image `flash-image.bin` can be found in `build/t9130/release/` directory.
+Please follow instruction at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Burning_firmware)
+to burn image to desired boot device.
# ARM System Ready certification.
diff --git a/Platform/SolidRun/Armada80x0McBin/Readme.md b/Platform/SolidRun/Armada80x0McBin/Readme.md
index c63cf41b2d..8c514835c4 100644
--- a/Platform/SolidRun/Armada80x0McBin/Readme.md
+++ b/Platform/SolidRun/Armada80x0McBin/Readme.md
@@ -3,94 +3,69 @@
# Summary
-This is a port of 64-bit TianoCore EDK II firmware for the SolidRun MacchiatoBin platform based on the Marvell ARMADA 8040 SoC.
+This is a port of 64-bit TianoCore EDK II firmware for the [SolidRun MacchiatoBin Double Shot](https://solidrun.atlassian.net/wiki/spaces/developer/pages/286655749/MACCHIATObin+Single+Double+Shot+Quick+Start+Guide)
+platform based on the Marvell ARMADA 8040 SoC.
-# Building the firmware
+# Supported features
-## Prepare toolchain (for cross-compilation only):
+Features supported in EDK2:
-1. Download the toolchain:
+* 1x PCIE x4
+* Networking:
+ * 2x 10 GbE via SFP+ / RJ45
+ * 1x 2500 Base-X via SFP+
+ * 1x 1 GbE SGMII via RJ45
+* 1x USB 3.0
+* 2x USB 2.0
+* 3x SATA
+* 1x uSD
+* 1x eMMC
+* RTC
+* SPI flash & memory-mapped variable storage access
+* GPIO
- ```
- wget https://releases.linaro.org/components/toolchain/binaries/7.5-2019.12/aarch64-linux-gnu/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu.tar.xz
- ```
+Hardware description:
-1. After extracting, setup the path and compiler prefix to GCC5\_AARCH64\_PREFIX variable:
+* ACPI (default)
+* Device Tree
- ```
- export GCC5_AARCH64_PREFIX=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
- ```
+Others:
-## Prepare prerequisites
+* Signed capsule update
+* X64 option ROM emulator
-1. Create a new folder (directory) on your local development machine
- for use as your workspace. This example uses `/work/git/tianocore`, modify as
- appropriate for your needs.
+# Building the firmware
- ```
- $ export WORKSPACE=/work/git/tianocore
- $ mkdir -p $WORKSPACE
- $ cd $WORKSPACE
- ```
+## Prepare EDKII environment:
-1. Clone the Trusted Firmware repository:
+Please follow instructions from [Obtaining source code](https://github.com/tianocore/edk2-platforms#obtaining-source-code)
+and [Manual building](https://github.com/tianocore/edk2-platforms#manual-building) from the
+top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
- ```
- $ cd ${WORKSPACE}
- $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
- ```
-1. Clone repository for auxiliary firmware on the SoC co-processors and checkout to binaries-marvell-armada-SDK10.0.1.0:
+## Build EDKII:
- ```
- $ cd ${WORKSPACE}
- $ git clone https://github.com/MarvellEmbeddedProcessors/binaries-marvell.git
- $ cd binaries-marvell/
- $ git checkout -b binaries-marvell-armada-SDK10.0.1.0 origin/binaries-marvell-armada-SDK10.0.1.0
- ```
-1. Clone the DDR training code from:
+Use below build command:
- ```
- $ cd ${WORKSPACE}
- $ git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
- ```
-## Prepare EDKII environment:
+ ```
+ $ build -a AARCH64 -t GCC5 -b RELEASE -D X64EMU_ENABLE -p Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc
+ ```
-Please follow instructions from "Obtaining source code" and "Manual building" from the top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
+---
+**NOTE**
-## Build EDKII:
-
-1. Use below build command:
+'-D INCLUDE_TFTP_COMMAND' is optional and can be added in order to enable `tftp` command in UEFI Shell.
- ```
- $ cd ${WORKSPACE}
- $ build -a AARCH64 -t GCC5 -b RELEASE -D INCLUDE_TFTP_COMMAND -D X64EMU_ENABLE -p Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc
- ```
+---
## Build the final firmware image:
-1. Set BL33 variable to path to EDK II output binary:
-
- ```
- $ export BL33=${WORKSPACE}/Build/Armada80x0McBin-AARCH64/RELEASE_GCC5/FV/ARMADA_EFI.fd
- ```
-1. Export SCP_BL2 variable:
-
- ```
- $ export SCP_BL2=${WORKSKPACE}/binaries-marvell/mrvl_scp_bl2.img
- ```
-1. Export compiler variables (for cross-compilation only):
-
- ```
- $ export ARCH=arm64
- $ export CROSS_COMPILE=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
- ```
-1. Build the image:
-
- ```
- $ cd ${WORKSPACE}/trusted-firmware-a/
- $ make LOG_LEVEL=20 MV_DDR_PATH=${WORKSPACE}/mv-ddr-marvell PLAT=a80x0_mcbin all fip mrvl_flash
- ```
-The firmware image `flash-image.bin` can be found in `build/a80x0_mcbin/release/` directory.
+In addition to EDKII binary, the complete firmware image comprises the TF-A and other components.
+A complete build instruction can be found at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Build_firmware).
+
+## Burning the firmware
+
+Please follow instruction at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Burning_firmware)
+to burn image to desired boot device.
# ARM System Ready certification.
diff --git a/Platform/SolidRun/Cn913xCEx7Eval/Readme.md b/Platform/SolidRun/Cn913xCEx7Eval/Readme.md
index 813e723b65..0db22b5175 100644
--- a/Platform/SolidRun/Cn913xCEx7Eval/Readme.md
+++ b/Platform/SolidRun/Cn913xCEx7Eval/Readme.md
@@ -3,95 +3,70 @@
# Summary
-This is a port of 64-bit TianoCore EDK II firmware for the SolidRun CN913x CEx7 Evaluation Board.
+This is a port of 64-bit TianoCore EDK II firmware for the [SolidRun CN913x CEx7 Evaluation Board](https://solidrun.atlassian.net/wiki/spaces/developer/pages/197493948/CN9132+COM+EVK+Quick+Start+Guide).
-# Building the firmware
-
-## Prepare toolchain (for cross-compilation only):
-
-1. Download the toolchain:
-
- ```
- wget https://releases.linaro.org/components/toolchain/binaries/7.5-2019.12/aarch64-linux-gnu/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu.tar.xz
- ```
+# Supported features
-1. After extracting, setup the path and compiler prefix to GCC5\_AARCH64\_PREFIX variable:
+Features supported in EDK2:
- ```
- export GCC5_AARCH64_PREFIX=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
- ```
+* 1x PCIE x4 + 6x PCIE x1
+* Networking:
+ * 1x 10 GbE via SFP+
+ * 2x 5 GbE via RJ45
+ * 1x 2500 Base-X via quad 1 Gbps switch
+ * 1x 1 GbE RGMII via RJ45
+* 2x USB 3.0
+* 4x USB 2.0
+* 2x SATA
+* 1x uSD
+* 1x eMMC
+* RTC
+* SPI flash & memory-mapped variable storage access
+* I2C
+* GPIO
-## Prepare prerequisites
+Hardware description:
-1. Create a new folder (directory) on your local development machine
- for use as your workspace. This example uses `/work/git/tianocore`, modify as
- appropriate for your needs.
+* ACPI (default)
+* Device Tree
- ```
- $ export WORKSPACE=/work/git/tianocore
- $ mkdir -p $WORKSPACE
- $ cd $WORKSPACE
- ```
+Others:
-1. Clone the Trusted Firmware repository:
+* Signed capsule update
+* X64 option ROM emulator
- ```
- $ cd ${WORKSPACE}
- $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
- ```
-1. Clone repository for auxiliary firmware on the SoC co-processors and checkout to binaries-marvell-armada-SDK10.0.1.0:
-
- ```
- $ cd ${WORKSPACE}
- $ git clone https://github.com/MarvellEmbeddedProcessors/binaries-marvell.git
- $ cd binaries-marvell/
- $ git checkout -b binaries-marvell-armada-SDK10.0.1.0 origin/binaries-marvell-armada-SDK10.0.1.0
- ```
-1. Clone the DDR training code from:
+# Building the firmware
- ```
- $ cd ${WORKSPACE}
- $ git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
- ```
## Prepare EDKII environment:
-Please follow instructions from "Obtaining source code" and "Manual building" from the top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
+Please follow instructions from [Obtaining source code](https://github.com/tianocore/edk2-platforms#obtaining-source-code)
+and [Manual building](https://github.com/tianocore/edk2-platforms#manual-building) from the
+top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
## Build EDKII:
-1. Use below build command:
+Use below build command:
- ```
- $ cd ${WORKSPACE}
- $ build -a AARCH64 -t GCC5 -b RELEASE -D INCLUDE_TFTP_COMMAND -D CAPSULE_ENABLE -D X64EMU_ENABLE -p Platform/SolidRun/Cn913xCEx7Eval/Cn913xCEx7Eval.dsc
- ```
+ ```
+ build -a AARCH64 -t GCC5 -b RELEASE -D CAPSULE_ENABLE -D X64EMU_ENABLE -p Platform/SolidRun/Cn913xCEx7Eval/Cn913xCEx7Eval.dsc
+ ```
-## Build the final firmware image:
+---
+**NOTE**
-1. Set BL33 variable to path to EDK II output binary:
+'-D INCLUDE_TFTP_COMMAND' is optional and can be added in order to enable `tftp` command in UEFI Shell.
- ```
- $ export BL33=${WORKSPACE}/Build/Cn913xCEx7Eval-AARCH64/RELEASE_GCC5/FV/ARMADA_EFI.fd
- ```
-1. Export SCP_BL2 variable:
+---
- ```
- $ export SCP_BL2=${WORKSKPACE}/binaries-marvell/mrvl_scp_bl2.img
- ```
-1. Export compiler variables (for cross-compilation only):
+## Build the final firmware image:
- ```
- $ export ARCH=arm64
- $ export CROSS_COMPILE=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
- ```
-1. Build the image:
+In addition to EDKII binary, the complete firmware image comprises the TF-A and other components.
+A complete build instruction can be found at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Build_firmware).
- ```
- $ cd ${WORKSPACE}/trusted-firmware-a/
- $ make LOG_LEVEL=20 MV_DDR_PATH=${WORKSPACE}/mv-ddr-marvell CP_NUM=3 PLAT=t9130_cex7_eval all fip mrvl_flash
+## Burning the firmware
- ```
-The firmware image `flash-image.bin` can be found in `build/t9130_cex7_eval/release/` directory.
+Please follow instruction at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Burning_firmware)
+to burn image to desired boot device.
# ARM System Ready certification.
--
2.29.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#87537): https://edk2.groups.io/g/devel/message/87537
Mute This Topic: https://groups.io/mt/89771621/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-Looks good. Thanks much, Marcin.
This will be helpful as http://wiki.macchiatobin.net/tiki-index.php has been not accessible for quite a while.
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Best Regards,
Sunny
-----Original Message-----
From: Marcin Wojtas <mw@semihalf.com>
Sent: 14 March 2022 12:06
To: devel@edk2.groups.io
Cc: quic_llindhol@quicinc.com; ardb+tianocore@kernel.org; jaz@semihalf.com; gjb@semihalf.com; Sunny Wang <Sunny.Wang@arm.com>; Marcin Wojtas <mw@semihalf.com>
Subject: [edk2-platforms PATCH] Marvell/SolidRun: Rework Readme.md files
From: Grzegorz Bernacki <gjb@semihalf.com>
This patch reworks Readme.md files of Marvell and SolidRun
platforms as follows:
* Add supported features list.
* Leave minmal EDK2 build command.
* Add 'NOTE' box about INCLUDE_TFTP_COMMAND build flag.
* Move full firmware image build/burn howtos to external wiki pages.
* Add links and update paragraphs.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
In order to ease review/merge the patch is available in a public repository:
https://github.com/Semihalf/edk2-platforms/commits/marvell-howtos-upstream-r20220314
Platform/Marvell/Cn913xDb/Readme.md | 104 +++++++-----------
Platform/SolidRun/Armada80x0McBin/Readme.md | 113 ++++++++------------
Platform/SolidRun/Cn913xCEx7Eval/Readme.md | 109 ++++++++-----------
3 files changed, 124 insertions(+), 202 deletions(-)
diff --git a/Platform/Marvell/Cn913xDb/Readme.md b/Platform/Marvell/Cn913xDb/Readme.md
index ecdb78302b..0b2ab676f8 100644
--- a/Platform/Marvell/Cn913xDb/Readme.md
+++ b/Platform/Marvell/Cn913xDb/Readme.md
@@ -5,93 +5,65 @@
This is a port of 64-bit TianoCore EDK II firmware for the Marvell CN913x Development Board.
-# Building the firmware
-
-## Prepare toolchain (for cross-compilation only):
-
-1. Download the toolchain:
-
- ```
- wget https://releases.linaro.org/components/toolchain/binaries/7.5-2019.12/aarch64-linux-gnu/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu.tar.xz
- ```
+# Supported features
-1. After extracting, setup the path and compiler prefix to GCC5\_AARCH64\_PREFIX variable:
+Features supported in EDK2:
- ```
- export GCC5_AARCH64_PREFIX=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
- ```
+* 1x PCIE root complex
+* Networking:
+ * 3x 10 GbE via SFP+
+ * 2x 1 GbE RGMII via RJ45
+* 5x USB 2.0/3.0
+* 3x SATA
+* 2x uSD
+* 1x eMMC
+* RTC
+* SPI flash & memory-mapped variable storage access
+* I2C
+* GPIO
-## Prepare prerequisites
+Hardware description:
-1. Create a new folder (directory) on your local development machine
- for use as your workspace. This example uses `/work/git/tianocore`, modify as
- appropriate for your needs.
+* ACPI (default)
+* Device Tree
- ```
- $ export WORKSPACE=/work/git/tianocore
- $ mkdir -p $WORKSPACE
- $ cd $WORKSPACE
- ```
+Others:
-1. Clone the Trusted Firmware repository:
+* Signed capsule update
+* X64 option ROM emulator
- ```
- $ cd ${WORKSPACE}
- $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
- ```
-1. Clone repository for auxiliary firmware on the SoC co-processors and checkout to binaries-marvell-armada-SDK10.0.1.0:
-
- ```
- $ cd ${WORKSPACE}
- $ git clone https://github.com/MarvellEmbeddedProcessors/binaries-marvell.git
- $ cd binaries-marvell/
- $ git checkout -b binaries-marvell-armada-SDK10.0.1.0 origin/binaries-marvell-armada-SDK10.0.1.0
- ```
-1. Clone the DDR training code from:
+# Building the firmware
- ```
- $ cd ${WORKSPACE}
- $ git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
- ```
## Prepare EDKII environment:
-Please follow instructions from "Obtaining source code" and "Manual building" from the top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
+Please follow instructions from [Obtaining source code](https://github.com/tianocore/edk2-platforms#obtaining-source-code)
+and [Manual building](https://github.com/tianocore/edk2-platforms#manual-building) from the
+top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
## Build EDKII:
-1. Use below build command:
+Use below build command:
- ```
- $ cd ${WORKSPACE}
- $ build -a AARCH64 -t GCC5 -b RELEASE -D CN9132 -D INCLUDE_TFTP_COMMAND -D CAPSULE_ENABLE -p Platform/Marvell/Cn913xDb/Cn913xDbA.dsc
- ```
+ ```
+ $ build -a AARCH64 -t GCC5 -b RELEASE -D CN9132 -D CAPSULE_ENABLE -D X64EMU_ENABLE -p Platform/Marvell/Cn913xDb/Cn913xDbA.dsc
+ ```
-## Build the final firmware image:
+---
+**NOTE**
-1. Set BL33 variable to path to EDK II output binary:
+'-D INCLUDE_TFTP_COMMAND' is optional and can be added in order to enable `tftp` command in UEFI Shell.
- ```
- $ export BL33=${WORKSPACE}/Build/Cn9132DbA-AARCH64/RELEASE_GCC5/FV/ARMADA_EFI.fd
- ```
-1. Export SCP_BL2 variable:
+---
- ```
- $ export SCP_BL2=${WORKSKPACE}/binaries-marvell/mrvl_scp_bl2.img
- ```
-1. Export compiler variables (for cross-compilation only):
+## Build the final firmware image:
- ```
- $ export ARCH=arm64
- $ export CROSS_COMPILE=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
- ```
-1. Build the image:
+In addition to EDKII binary, the complete firmware image comprises the TF-A and other components.
+A complete build instruction can be found at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Build_firmware).
- ```
- $ cd ${WORKSPACE}/trusted-firmware-a/
- $ make LOG_LEVEL=20 MV_DDR_PATH=${WORKSPACE}/mv-ddr-marvell CP_NUM=3 PLAT=t9130 all fip mrvl_flash
+## Burning the firmware
- ```
-The firmware image `flash-image.bin` can be found in `build/t9130/release/` directory.
+Please follow instruction at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Burning_firmware)
+to burn image to desired boot device.
# ARM System Ready certification.
diff --git a/Platform/SolidRun/Armada80x0McBin/Readme.md b/Platform/SolidRun/Armada80x0McBin/Readme.md
index c63cf41b2d..8c514835c4 100644
--- a/Platform/SolidRun/Armada80x0McBin/Readme.md
+++ b/Platform/SolidRun/Armada80x0McBin/Readme.md
@@ -3,94 +3,69 @@
# Summary
-This is a port of 64-bit TianoCore EDK II firmware for the SolidRun MacchiatoBin platform based on the Marvell ARMADA 8040 SoC.
+This is a port of 64-bit TianoCore EDK II firmware for the [SolidRun MacchiatoBin Double Shot](https://solidrun.atlassian.net/wiki/spaces/developer/pages/286655749/MACCHIATObin+Single+Double+Shot+Quick+Start+Guide)
+platform based on the Marvell ARMADA 8040 SoC.
-# Building the firmware
+# Supported features
-## Prepare toolchain (for cross-compilation only):
+Features supported in EDK2:
-1. Download the toolchain:
+* 1x PCIE x4
+* Networking:
+ * 2x 10 GbE via SFP+ / RJ45
+ * 1x 2500 Base-X via SFP+
+ * 1x 1 GbE SGMII via RJ45
+* 1x USB 3.0
+* 2x USB 2.0
+* 3x SATA
+* 1x uSD
+* 1x eMMC
+* RTC
+* SPI flash & memory-mapped variable storage access
+* GPIO
- ```
- wget https://releases.linaro.org/components/toolchain/binaries/7.5-2019.12/aarch64-linux-gnu/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu.tar.xz
- ```
+Hardware description:
-1. After extracting, setup the path and compiler prefix to GCC5\_AARCH64\_PREFIX variable:
+* ACPI (default)
+* Device Tree
- ```
- export GCC5_AARCH64_PREFIX=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
- ```
+Others:
-## Prepare prerequisites
+* Signed capsule update
+* X64 option ROM emulator
-1. Create a new folder (directory) on your local development machine
- for use as your workspace. This example uses `/work/git/tianocore`, modify as
- appropriate for your needs.
+# Building the firmware
- ```
- $ export WORKSPACE=/work/git/tianocore
- $ mkdir -p $WORKSPACE
- $ cd $WORKSPACE
- ```
+## Prepare EDKII environment:
-1. Clone the Trusted Firmware repository:
+Please follow instructions from [Obtaining source code](https://github.com/tianocore/edk2-platforms#obtaining-source-code)
+and [Manual building](https://github.com/tianocore/edk2-platforms#manual-building) from the
+top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
- ```
- $ cd ${WORKSPACE}
- $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
- ```
-1. Clone repository for auxiliary firmware on the SoC co-processors and checkout to binaries-marvell-armada-SDK10.0.1.0:
+## Build EDKII:
- ```
- $ cd ${WORKSPACE}
- $ git clone https://github.com/MarvellEmbeddedProcessors/binaries-marvell.git
- $ cd binaries-marvell/
- $ git checkout -b binaries-marvell-armada-SDK10.0.1.0 origin/binaries-marvell-armada-SDK10.0.1.0
- ```
-1. Clone the DDR training code from:
+Use below build command:
- ```
- $ cd ${WORKSPACE}
- $ git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
- ```
-## Prepare EDKII environment:
+ ```
+ $ build -a AARCH64 -t GCC5 -b RELEASE -D X64EMU_ENABLE -p Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc
+ ```
-Please follow instructions from "Obtaining source code" and "Manual building" from the top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
+---
+**NOTE**
-## Build EDKII:
-
-1. Use below build command:
+'-D INCLUDE_TFTP_COMMAND' is optional and can be added in order to enable `tftp` command in UEFI Shell.
- ```
- $ cd ${WORKSPACE}
- $ build -a AARCH64 -t GCC5 -b RELEASE -D INCLUDE_TFTP_COMMAND -D X64EMU_ENABLE -p Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc
- ```
+---
## Build the final firmware image:
-1. Set BL33 variable to path to EDK II output binary:
-
- ```
- $ export BL33=${WORKSPACE}/Build/Armada80x0McBin-AARCH64/RELEASE_GCC5/FV/ARMADA_EFI.fd
- ```
-1. Export SCP_BL2 variable:
-
- ```
- $ export SCP_BL2=${WORKSKPACE}/binaries-marvell/mrvl_scp_bl2.img
- ```
-1. Export compiler variables (for cross-compilation only):
-
- ```
- $ export ARCH=arm64
- $ export CROSS_COMPILE=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
- ```
-1. Build the image:
-
- ```
- $ cd ${WORKSPACE}/trusted-firmware-a/
- $ make LOG_LEVEL=20 MV_DDR_PATH=${WORKSPACE}/mv-ddr-marvell PLAT=a80x0_mcbin all fip mrvl_flash
- ```
-The firmware image `flash-image.bin` can be found in `build/a80x0_mcbin/release/` directory.
+In addition to EDKII binary, the complete firmware image comprises the TF-A and other components.
+A complete build instruction can be found at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Build_firmware).
+
+## Burning the firmware
+
+Please follow instruction at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Burning_firmware)
+to burn image to desired boot device.
# ARM System Ready certification.
diff --git a/Platform/SolidRun/Cn913xCEx7Eval/Readme.md b/Platform/SolidRun/Cn913xCEx7Eval/Readme.md
index 813e723b65..0db22b5175 100644
--- a/Platform/SolidRun/Cn913xCEx7Eval/Readme.md
+++ b/Platform/SolidRun/Cn913xCEx7Eval/Readme.md
@@ -3,95 +3,70 @@
# Summary
-This is a port of 64-bit TianoCore EDK II firmware for the SolidRun CN913x CEx7 Evaluation Board.
+This is a port of 64-bit TianoCore EDK II firmware for the [SolidRun CN913x CEx7 Evaluation Board](https://solidrun.atlassian.net/wiki/spaces/developer/pages/197493948/CN9132+COM+EVK+Quick+Start+Guide).
-# Building the firmware
-
-## Prepare toolchain (for cross-compilation only):
-
-1. Download the toolchain:
-
- ```
- wget https://releases.linaro.org/components/toolchain/binaries/7.5-2019.12/aarch64-linux-gnu/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu.tar.xz
- ```
+# Supported features
-1. After extracting, setup the path and compiler prefix to GCC5\_AARCH64\_PREFIX variable:
+Features supported in EDK2:
- ```
- export GCC5_AARCH64_PREFIX=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
- ```
+* 1x PCIE x4 + 6x PCIE x1
+* Networking:
+ * 1x 10 GbE via SFP+
+ * 2x 5 GbE via RJ45
+ * 1x 2500 Base-X via quad 1 Gbps switch
+ * 1x 1 GbE RGMII via RJ45
+* 2x USB 3.0
+* 4x USB 2.0
+* 2x SATA
+* 1x uSD
+* 1x eMMC
+* RTC
+* SPI flash & memory-mapped variable storage access
+* I2C
+* GPIO
-## Prepare prerequisites
+Hardware description:
-1. Create a new folder (directory) on your local development machine
- for use as your workspace. This example uses `/work/git/tianocore`, modify as
- appropriate for your needs.
+* ACPI (default)
+* Device Tree
- ```
- $ export WORKSPACE=/work/git/tianocore
- $ mkdir -p $WORKSPACE
- $ cd $WORKSPACE
- ```
+Others:
-1. Clone the Trusted Firmware repository:
+* Signed capsule update
+* X64 option ROM emulator
- ```
- $ cd ${WORKSPACE}
- $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
- ```
-1. Clone repository for auxiliary firmware on the SoC co-processors and checkout to binaries-marvell-armada-SDK10.0.1.0:
-
- ```
- $ cd ${WORKSPACE}
- $ git clone https://github.com/MarvellEmbeddedProcessors/binaries-marvell.git
- $ cd binaries-marvell/
- $ git checkout -b binaries-marvell-armada-SDK10.0.1.0 origin/binaries-marvell-armada-SDK10.0.1.0
- ```
-1. Clone the DDR training code from:
+# Building the firmware
- ```
- $ cd ${WORKSPACE}
- $ git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
- ```
## Prepare EDKII environment:
-Please follow instructions from "Obtaining source code" and "Manual building" from the top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
+Please follow instructions from [Obtaining source code](https://github.com/tianocore/edk2-platforms#obtaining-source-code)
+and [Manual building](https://github.com/tianocore/edk2-platforms#manual-building) from the
+top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
## Build EDKII:
-1. Use below build command:
+Use below build command:
- ```
- $ cd ${WORKSPACE}
- $ build -a AARCH64 -t GCC5 -b RELEASE -D INCLUDE_TFTP_COMMAND -D CAPSULE_ENABLE -D X64EMU_ENABLE -p Platform/SolidRun/Cn913xCEx7Eval/Cn913xCEx7Eval.dsc
- ```
+ ```
+ build -a AARCH64 -t GCC5 -b RELEASE -D CAPSULE_ENABLE -D X64EMU_ENABLE -p Platform/SolidRun/Cn913xCEx7Eval/Cn913xCEx7Eval.dsc
+ ```
-## Build the final firmware image:
+---
+**NOTE**
-1. Set BL33 variable to path to EDK II output binary:
+'-D INCLUDE_TFTP_COMMAND' is optional and can be added in order to enable `tftp` command in UEFI Shell.
- ```
- $ export BL33=${WORKSPACE}/Build/Cn913xCEx7Eval-AARCH64/RELEASE_GCC5/FV/ARMADA_EFI.fd
- ```
-1. Export SCP_BL2 variable:
+---
- ```
- $ export SCP_BL2=${WORKSKPACE}/binaries-marvell/mrvl_scp_bl2.img
- ```
-1. Export compiler variables (for cross-compilation only):
+## Build the final firmware image:
- ```
- $ export ARCH=arm64
- $ export CROSS_COMPILE=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
- ```
-1. Build the image:
+In addition to EDKII binary, the complete firmware image comprises the TF-A and other components.
+A complete build instruction can be found at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Build_firmware).
- ```
- $ cd ${WORKSPACE}/trusted-firmware-a/
- $ make LOG_LEVEL=20 MV_DDR_PATH=${WORKSPACE}/mv-ddr-marvell CP_NUM=3 PLAT=t9130_cex7_eval all fip mrvl_flash
+## Burning the firmware
- ```
-The firmware image `flash-image.bin` can be found in `build/t9130_cex7_eval/release/` directory.
+Please follow instruction at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Burning_firmware)
+to burn image to desired boot device.
# ARM System Ready certification.
--
2.29.0
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#87549): https://edk2.groups.io/g/devel/message/87549
Mute This Topic: https://groups.io/mt/89771621/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
Hi,
pon., 14 mar 2022 o 18:17 Sunny Wang <Sunny.Wang@arm.com> napisał(a):
>
> Looks good. Thanks much, Marcin.
>
> This will be helpful as http://wiki.macchiatobin.net/tiki-index.php has been not accessible for quite a while.
>
> Reviewed-by: Sunny Wang <sunny.wang@arm.com>
>
Do you have any feedback about the patch?
Best regards,
Marcin
> Best Regards,
> Sunny
> -----Original Message-----
> From: Marcin Wojtas <mw@semihalf.com>
> Sent: 14 March 2022 12:06
> To: devel@edk2.groups.io
> Cc: quic_llindhol@quicinc.com; ardb+tianocore@kernel.org; jaz@semihalf.com; gjb@semihalf.com; Sunny Wang <Sunny.Wang@arm.com>; Marcin Wojtas <mw@semihalf.com>
> Subject: [edk2-platforms PATCH] Marvell/SolidRun: Rework Readme.md files
>
> From: Grzegorz Bernacki <gjb@semihalf.com>
>
> This patch reworks Readme.md files of Marvell and SolidRun
> platforms as follows:
> * Add supported features list.
> * Leave minmal EDK2 build command.
> * Add 'NOTE' box about INCLUDE_TFTP_COMMAND build flag.
> * Move full firmware image build/burn howtos to external wiki pages.
> * Add links and update paragraphs.
>
> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
>
> ---
> In order to ease review/merge the patch is available in a public repository:
> https://github.com/Semihalf/edk2-platforms/commits/marvell-howtos-upstream-r20220314
>
> Platform/Marvell/Cn913xDb/Readme.md | 104 +++++++-----------
> Platform/SolidRun/Armada80x0McBin/Readme.md | 113 ++++++++------------
> Platform/SolidRun/Cn913xCEx7Eval/Readme.md | 109 ++++++++-----------
> 3 files changed, 124 insertions(+), 202 deletions(-)
>
> diff --git a/Platform/Marvell/Cn913xDb/Readme.md b/Platform/Marvell/Cn913xDb/Readme.md
> index ecdb78302b..0b2ab676f8 100644
> --- a/Platform/Marvell/Cn913xDb/Readme.md
> +++ b/Platform/Marvell/Cn913xDb/Readme.md
> @@ -5,93 +5,65 @@
>
>
> This is a port of 64-bit TianoCore EDK II firmware for the Marvell CN913x Development Board.
>
>
>
> -# Building the firmware
>
> -
>
> -## Prepare toolchain (for cross-compilation only):
>
> -
>
> -1. Download the toolchain:
>
> -
>
> - ```
>
> - wget https://releases.linaro.org/components/toolchain/binaries/7.5-2019.12/aarch64-linux-gnu/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu.tar.xz
>
> - ```
>
> +# Supported features
>
>
>
> -1. After extracting, setup the path and compiler prefix to GCC5\_AARCH64\_PREFIX variable:
>
> +Features supported in EDK2:
>
>
>
> - ```
>
> - export GCC5_AARCH64_PREFIX=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
>
> - ```
>
> +* 1x PCIE root complex
>
> +* Networking:
>
> + * 3x 10 GbE via SFP+
>
> + * 2x 1 GbE RGMII via RJ45
>
> +* 5x USB 2.0/3.0
>
> +* 3x SATA
>
> +* 2x uSD
>
> +* 1x eMMC
>
> +* RTC
>
> +* SPI flash & memory-mapped variable storage access
>
> +* I2C
>
> +* GPIO
>
>
>
> -## Prepare prerequisites
>
> +Hardware description:
>
>
>
> -1. Create a new folder (directory) on your local development machine
>
> - for use as your workspace. This example uses `/work/git/tianocore`, modify as
>
> - appropriate for your needs.
>
> +* ACPI (default)
>
> +* Device Tree
>
>
>
> - ```
>
> - $ export WORKSPACE=/work/git/tianocore
>
> - $ mkdir -p $WORKSPACE
>
> - $ cd $WORKSPACE
>
> - ```
>
> +Others:
>
>
>
> -1. Clone the Trusted Firmware repository:
>
> +* Signed capsule update
>
> +* X64 option ROM emulator
>
>
>
> - ```
>
> - $ cd ${WORKSPACE}
>
> - $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
>
> - ```
>
> -1. Clone repository for auxiliary firmware on the SoC co-processors and checkout to binaries-marvell-armada-SDK10.0.1.0:
>
> -
>
> - ```
>
> - $ cd ${WORKSPACE}
>
> - $ git clone https://github.com/MarvellEmbeddedProcessors/binaries-marvell.git
>
> - $ cd binaries-marvell/
>
> - $ git checkout -b binaries-marvell-armada-SDK10.0.1.0 origin/binaries-marvell-armada-SDK10.0.1.0
>
> - ```
>
> -1. Clone the DDR training code from:
>
> +# Building the firmware
>
>
>
> - ```
>
> - $ cd ${WORKSPACE}
>
> - $ git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
>
> - ```
>
> ## Prepare EDKII environment:
>
>
>
> -Please follow instructions from "Obtaining source code" and "Manual building" from the top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
>
> +Please follow instructions from [Obtaining source code](https://github.com/tianocore/edk2-platforms#obtaining-source-code)
>
> +and [Manual building](https://github.com/tianocore/edk2-platforms#manual-building) from the
>
> +top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
>
>
>
> ## Build EDKII:
>
>
>
> -1. Use below build command:
>
> +Use below build command:
>
>
>
> - ```
>
> - $ cd ${WORKSPACE}
>
> - $ build -a AARCH64 -t GCC5 -b RELEASE -D CN9132 -D INCLUDE_TFTP_COMMAND -D CAPSULE_ENABLE -p Platform/Marvell/Cn913xDb/Cn913xDbA.dsc
>
> - ```
>
> + ```
>
> + $ build -a AARCH64 -t GCC5 -b RELEASE -D CN9132 -D CAPSULE_ENABLE -D X64EMU_ENABLE -p Platform/Marvell/Cn913xDb/Cn913xDbA.dsc
>
> + ```
>
>
>
> -## Build the final firmware image:
>
> +---
>
> +**NOTE**
>
>
>
> -1. Set BL33 variable to path to EDK II output binary:
>
> +'-D INCLUDE_TFTP_COMMAND' is optional and can be added in order to enable `tftp` command in UEFI Shell.
>
>
>
> - ```
>
> - $ export BL33=${WORKSPACE}/Build/Cn9132DbA-AARCH64/RELEASE_GCC5/FV/ARMADA_EFI.fd
>
> - ```
>
> -1. Export SCP_BL2 variable:
>
> +---
>
>
>
> - ```
>
> - $ export SCP_BL2=${WORKSKPACE}/binaries-marvell/mrvl_scp_bl2.img
>
> - ```
>
> -1. Export compiler variables (for cross-compilation only):
>
> +## Build the final firmware image:
>
>
>
> - ```
>
> - $ export ARCH=arm64
>
> - $ export CROSS_COMPILE=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
>
> - ```
>
> -1. Build the image:
>
> +In addition to EDKII binary, the complete firmware image comprises the TF-A and other components.
>
> +A complete build instruction can be found at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Build_firmware).
>
>
>
> - ```
>
> - $ cd ${WORKSPACE}/trusted-firmware-a/
>
> - $ make LOG_LEVEL=20 MV_DDR_PATH=${WORKSPACE}/mv-ddr-marvell CP_NUM=3 PLAT=t9130 all fip mrvl_flash
>
> +## Burning the firmware
>
>
>
> - ```
>
> -The firmware image `flash-image.bin` can be found in `build/t9130/release/` directory.
>
> +Please follow instruction at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Burning_firmware)
>
> +to burn image to desired boot device.
>
>
>
> # ARM System Ready certification.
>
>
>
> diff --git a/Platform/SolidRun/Armada80x0McBin/Readme.md b/Platform/SolidRun/Armada80x0McBin/Readme.md
> index c63cf41b2d..8c514835c4 100644
> --- a/Platform/SolidRun/Armada80x0McBin/Readme.md
> +++ b/Platform/SolidRun/Armada80x0McBin/Readme.md
> @@ -3,94 +3,69 @@
>
>
> # Summary
>
>
>
> -This is a port of 64-bit TianoCore EDK II firmware for the SolidRun MacchiatoBin platform based on the Marvell ARMADA 8040 SoC.
>
> +This is a port of 64-bit TianoCore EDK II firmware for the [SolidRun MacchiatoBin Double Shot](https://solidrun.atlassian.net/wiki/spaces/developer/pages/286655749/MACCHIATObin+Single+Double+Shot+Quick+Start+Guide)
>
> +platform based on the Marvell ARMADA 8040 SoC.
>
>
>
> -# Building the firmware
>
> +# Supported features
>
>
>
> -## Prepare toolchain (for cross-compilation only):
>
> +Features supported in EDK2:
>
>
>
> -1. Download the toolchain:
>
> +* 1x PCIE x4
>
> +* Networking:
>
> + * 2x 10 GbE via SFP+ / RJ45
>
> + * 1x 2500 Base-X via SFP+
>
> + * 1x 1 GbE SGMII via RJ45
>
> +* 1x USB 3.0
>
> +* 2x USB 2.0
>
> +* 3x SATA
>
> +* 1x uSD
>
> +* 1x eMMC
>
> +* RTC
>
> +* SPI flash & memory-mapped variable storage access
>
> +* GPIO
>
>
>
> - ```
>
> - wget https://releases.linaro.org/components/toolchain/binaries/7.5-2019.12/aarch64-linux-gnu/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu.tar.xz
>
> - ```
>
> +Hardware description:
>
>
>
> -1. After extracting, setup the path and compiler prefix to GCC5\_AARCH64\_PREFIX variable:
>
> +* ACPI (default)
>
> +* Device Tree
>
>
>
> - ```
>
> - export GCC5_AARCH64_PREFIX=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
>
> - ```
>
> +Others:
>
>
>
> -## Prepare prerequisites
>
> +* Signed capsule update
>
> +* X64 option ROM emulator
>
>
>
> -1. Create a new folder (directory) on your local development machine
>
> - for use as your workspace. This example uses `/work/git/tianocore`, modify as
>
> - appropriate for your needs.
>
> +# Building the firmware
>
>
>
> - ```
>
> - $ export WORKSPACE=/work/git/tianocore
>
> - $ mkdir -p $WORKSPACE
>
> - $ cd $WORKSPACE
>
> - ```
>
> +## Prepare EDKII environment:
>
>
>
> -1. Clone the Trusted Firmware repository:
>
> +Please follow instructions from [Obtaining source code](https://github.com/tianocore/edk2-platforms#obtaining-source-code)
>
> +and [Manual building](https://github.com/tianocore/edk2-platforms#manual-building) from the
>
> +top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
>
>
>
> - ```
>
> - $ cd ${WORKSPACE}
>
> - $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
>
> - ```
>
> -1. Clone repository for auxiliary firmware on the SoC co-processors and checkout to binaries-marvell-armada-SDK10.0.1.0:
>
> +## Build EDKII:
>
>
>
> - ```
>
> - $ cd ${WORKSPACE}
>
> - $ git clone https://github.com/MarvellEmbeddedProcessors/binaries-marvell.git
>
> - $ cd binaries-marvell/
>
> - $ git checkout -b binaries-marvell-armada-SDK10.0.1.0 origin/binaries-marvell-armada-SDK10.0.1.0
>
> - ```
>
> -1. Clone the DDR training code from:
>
> +Use below build command:
>
>
>
> - ```
>
> - $ cd ${WORKSPACE}
>
> - $ git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
>
> - ```
>
> -## Prepare EDKII environment:
>
> + ```
>
> + $ build -a AARCH64 -t GCC5 -b RELEASE -D X64EMU_ENABLE -p Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc
>
> + ```
>
>
>
> -Please follow instructions from "Obtaining source code" and "Manual building" from the top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
>
> +---
>
> +**NOTE**
>
>
>
> -## Build EDKII:
>
> -
>
> -1. Use below build command:
>
> +'-D INCLUDE_TFTP_COMMAND' is optional and can be added in order to enable `tftp` command in UEFI Shell.
>
>
>
> - ```
>
> - $ cd ${WORKSPACE}
>
> - $ build -a AARCH64 -t GCC5 -b RELEASE -D INCLUDE_TFTP_COMMAND -D X64EMU_ENABLE -p Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc
>
> - ```
>
> +---
>
>
>
> ## Build the final firmware image:
>
>
>
> -1. Set BL33 variable to path to EDK II output binary:
>
> -
>
> - ```
>
> - $ export BL33=${WORKSPACE}/Build/Armada80x0McBin-AARCH64/RELEASE_GCC5/FV/ARMADA_EFI.fd
>
> - ```
>
> -1. Export SCP_BL2 variable:
>
> -
>
> - ```
>
> - $ export SCP_BL2=${WORKSKPACE}/binaries-marvell/mrvl_scp_bl2.img
>
> - ```
>
> -1. Export compiler variables (for cross-compilation only):
>
> -
>
> - ```
>
> - $ export ARCH=arm64
>
> - $ export CROSS_COMPILE=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
>
> - ```
>
> -1. Build the image:
>
> -
>
> - ```
>
> - $ cd ${WORKSPACE}/trusted-firmware-a/
>
> - $ make LOG_LEVEL=20 MV_DDR_PATH=${WORKSPACE}/mv-ddr-marvell PLAT=a80x0_mcbin all fip mrvl_flash
>
> - ```
>
> -The firmware image `flash-image.bin` can be found in `build/a80x0_mcbin/release/` directory.
>
> +In addition to EDKII binary, the complete firmware image comprises the TF-A and other components.
>
> +A complete build instruction can be found at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Build_firmware).
>
> +
>
> +## Burning the firmware
>
> +
>
> +Please follow instruction at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Burning_firmware)
>
> +to burn image to desired boot device.
>
>
>
> # ARM System Ready certification.
>
>
>
> diff --git a/Platform/SolidRun/Cn913xCEx7Eval/Readme.md b/Platform/SolidRun/Cn913xCEx7Eval/Readme.md
> index 813e723b65..0db22b5175 100644
> --- a/Platform/SolidRun/Cn913xCEx7Eval/Readme.md
> +++ b/Platform/SolidRun/Cn913xCEx7Eval/Readme.md
> @@ -3,95 +3,70 @@
>
>
> # Summary
>
>
>
> -This is a port of 64-bit TianoCore EDK II firmware for the SolidRun CN913x CEx7 Evaluation Board.
>
> +This is a port of 64-bit TianoCore EDK II firmware for the [SolidRun CN913x CEx7 Evaluation Board](https://solidrun.atlassian.net/wiki/spaces/developer/pages/197493948/CN9132+COM+EVK+Quick+Start+Guide).
>
>
>
> -# Building the firmware
>
> -
>
> -## Prepare toolchain (for cross-compilation only):
>
> -
>
> -1. Download the toolchain:
>
> -
>
> - ```
>
> - wget https://releases.linaro.org/components/toolchain/binaries/7.5-2019.12/aarch64-linux-gnu/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu.tar.xz
>
> - ```
>
> +# Supported features
>
>
>
> -1. After extracting, setup the path and compiler prefix to GCC5\_AARCH64\_PREFIX variable:
>
> +Features supported in EDK2:
>
>
>
> - ```
>
> - export GCC5_AARCH64_PREFIX=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
>
> - ```
>
> +* 1x PCIE x4 + 6x PCIE x1
>
> +* Networking:
>
> + * 1x 10 GbE via SFP+
>
> + * 2x 5 GbE via RJ45
>
> + * 1x 2500 Base-X via quad 1 Gbps switch
>
> + * 1x 1 GbE RGMII via RJ45
>
> +* 2x USB 3.0
>
> +* 4x USB 2.0
>
> +* 2x SATA
>
> +* 1x uSD
>
> +* 1x eMMC
>
> +* RTC
>
> +* SPI flash & memory-mapped variable storage access
>
> +* I2C
>
> +* GPIO
>
>
>
> -## Prepare prerequisites
>
> +Hardware description:
>
>
>
> -1. Create a new folder (directory) on your local development machine
>
> - for use as your workspace. This example uses `/work/git/tianocore`, modify as
>
> - appropriate for your needs.
>
> +* ACPI (default)
>
> +* Device Tree
>
>
>
> - ```
>
> - $ export WORKSPACE=/work/git/tianocore
>
> - $ mkdir -p $WORKSPACE
>
> - $ cd $WORKSPACE
>
> - ```
>
> +Others:
>
>
>
> -1. Clone the Trusted Firmware repository:
>
> +* Signed capsule update
>
> +* X64 option ROM emulator
>
>
>
> - ```
>
> - $ cd ${WORKSPACE}
>
> - $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
>
> - ```
>
> -1. Clone repository for auxiliary firmware on the SoC co-processors and checkout to binaries-marvell-armada-SDK10.0.1.0:
>
> -
>
> - ```
>
> - $ cd ${WORKSPACE}
>
> - $ git clone https://github.com/MarvellEmbeddedProcessors/binaries-marvell.git
>
> - $ cd binaries-marvell/
>
> - $ git checkout -b binaries-marvell-armada-SDK10.0.1.0 origin/binaries-marvell-armada-SDK10.0.1.0
>
> - ```
>
> -1. Clone the DDR training code from:
>
> +# Building the firmware
>
>
>
> - ```
>
> - $ cd ${WORKSPACE}
>
> - $ git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
>
> - ```
>
> ## Prepare EDKII environment:
>
>
>
> -Please follow instructions from "Obtaining source code" and "Manual building" from the top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
>
> +Please follow instructions from [Obtaining source code](https://github.com/tianocore/edk2-platforms#obtaining-source-code)
>
> +and [Manual building](https://github.com/tianocore/edk2-platforms#manual-building) from the
>
> +top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
>
>
>
> ## Build EDKII:
>
>
>
> -1. Use below build command:
>
> +Use below build command:
>
>
>
> - ```
>
> - $ cd ${WORKSPACE}
>
> - $ build -a AARCH64 -t GCC5 -b RELEASE -D INCLUDE_TFTP_COMMAND -D CAPSULE_ENABLE -D X64EMU_ENABLE -p Platform/SolidRun/Cn913xCEx7Eval/Cn913xCEx7Eval.dsc
>
> - ```
>
> + ```
>
> + build -a AARCH64 -t GCC5 -b RELEASE -D CAPSULE_ENABLE -D X64EMU_ENABLE -p Platform/SolidRun/Cn913xCEx7Eval/Cn913xCEx7Eval.dsc
>
> + ```
>
>
>
> -## Build the final firmware image:
>
> +---
>
> +**NOTE**
>
>
>
> -1. Set BL33 variable to path to EDK II output binary:
>
> +'-D INCLUDE_TFTP_COMMAND' is optional and can be added in order to enable `tftp` command in UEFI Shell.
>
>
>
> - ```
>
> - $ export BL33=${WORKSPACE}/Build/Cn913xCEx7Eval-AARCH64/RELEASE_GCC5/FV/ARMADA_EFI.fd
>
> - ```
>
> -1. Export SCP_BL2 variable:
>
> +---
>
>
>
> - ```
>
> - $ export SCP_BL2=${WORKSKPACE}/binaries-marvell/mrvl_scp_bl2.img
>
> - ```
>
> -1. Export compiler variables (for cross-compilation only):
>
> +## Build the final firmware image:
>
>
>
> - ```
>
> - $ export ARCH=arm64
>
> - $ export CROSS_COMPILE=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
>
> - ```
>
> -1. Build the image:
>
> +In addition to EDKII binary, the complete firmware image comprises the TF-A and other components.
>
> +A complete build instruction can be found at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Build_firmware).
>
>
>
> - ```
>
> - $ cd ${WORKSPACE}/trusted-firmware-a/
>
> - $ make LOG_LEVEL=20 MV_DDR_PATH=${WORKSPACE}/mv-ddr-marvell CP_NUM=3 PLAT=t9130_cex7_eval all fip mrvl_flash
>
> +## Burning the firmware
>
>
>
> - ```
>
> -The firmware image `flash-image.bin` can be found in `build/t9130_cex7_eval/release/` directory.
>
> +Please follow instruction at [wiki page](https://github.com/Semihalf/edk2-platforms/wiki/Burning_firmware)
>
> +to burn image to desired boot device.
>
>
>
> # ARM System Ready certification.
>
>
>
> --
> 2.29.0
>
> IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#88479): https://edk2.groups.io/g/devel/message/88479
Mute This Topic: https://groups.io/mt/89771621/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
© 2016 - 2024 Red Hat, Inc.