***
PI Specification v1.5 "Volume 4: Management Mode Core Interface"
introduces the concept of MM Standalone Mode. Initialization of this mode
can be done during the SEC phase (Section 1.5.2).
On ARMv8-A systems, ARM Trusted Firmware is responsible for launching
the normal world firmware e.g. UEFI.
The Standalone MM environment is instantiated in Secure EL0 as a separate
firmware volume. It executes as BL32 Image under control of ARM TF
which is instantiated in EL3. Both components execute in the AArch64 execution state.
This patchset will build upon the StandaloneSmmPkg module originally
contributed by Intel.
This package can be used in conjunction with ARM Trusted Firmware
to recreate a simple MM secure environment that demonstrates communication
between two UEFI images where one is executing in the normal world and the other is
executing in the secure world.
The normal world image includes:
MM Communication DXE runtime driver that implements the protocol for communication
with the MM environment in the secure world.
The secure world image includes:
The MM Standalone framework.
This patchset includes the proposed organization/structure.
In order to be able to review the changes more effectively, the changes are present here:
https://github.com/supven01/edk2.git (Branch: master)
Steps to build MM Standalone images
In user preferred "work" directory, execute the following shell commands
git clone https://github.com/tianocore/edk2.git
git checkout master
git clone https://github.com/tianocore/edk2-platforms.git
git checkout master
mkdir arm-tf
cd arm-tf
git clone https://github.com/ARM-software/arm-trusted-firmware.git .
git checkout master
cd ..
git clone https://git.linaro.org/uefi/uefi-tools.git .
git checkout master
The following will build the MM Standalone image which runs in secure world.
./uefi-tools/edk2-build.sh -b DEBUG fvp_mm_standalone
The follwing will build the normal world UEFI image, ARM Trusted Firmware and
a Firmware Image Package (FIP) that includes both the UEFI images.
./uefi-tools/edk2-build.sh -a ./arm-tf -b DEBUG fvp_mm_normal
Boot Loader Stage 1 (BL1) binary and combined arm-tf/uefi firmware image package (fip) binary will be generated at:
Build Output
Build/ArmVExpress-FVP-AArch64-MM/DEBUG_GCC5/FV/bl1.bin
Build/ArmVExpress-FVP-AArch64-MM/DEBUG_GCC5/FV/fip.bin
Steps to run MM Standalone image
1. Download the ARMv8 Architecture FVP from
https://silver.arm.com/download/download.tm?pv=3744408&p=1424570
For more information, please refer
https://developer.arm.com/products/system-design/fixed-virtual-platforms
2. Install FVP into preferred "work" directory.
3. Create a shell script "run_mm.sh" in the same folder where "FVP_Base_AEMv8A-AEMv8A" is present.
Sample Shell script below:
./FVP_Base_AEMv8A-AEMv8A
-C cache_state_modelled=0
-C bp.secure_memory=1
-C bp.tzc_400.diagnostics=1
-C bp.pl011_uart0.untimed_fifos=0
-C cluster1.NUM_CORES=4
-C cluster0.NUM_CORES=4
-C bp.pl011_uart0.out_file=uart0.output
-C bp.pl011_uart1.out_file=uart1.output
-C bp.pl011_uart2.out_file=uart2.output
-C bp.pl011_uart3.out_file=uart3.output
-C bp.secureflashloader.fname=""
-C bp.flashloader0.fname=""
-S -R
4. ./run_mm.sh
5. Output can be seen on FVP console.
6. The normal world will boot to the UEFI shell.
Sample Output
MM Standalone Output (FVP UART2)
SPM Version: Major=0x0, Minor=0x1
NumSpMemRegions - 0x6
SpMemBase - 0xFF200000
SpMemLimit - 0x100000000
SpImageBase - 0xFF200000
SpStackBase - 0xFF610000
SpHeapBase - 0xFF620000
SpNsCommBufBase - 0xFF600000
SpSharedBufBase - 0xFF500000
SpImageSize - 0x300000
SpPcpuStackSize - 0x2000
SpHeapSize - 0x9E0000
SpNsCommBufSize - 0x10000
SpPcpuSharedBufSize - 0x20000
NumCpus - 0x8
CpuInfo - 0xFF500680
Mpidr - 0x80000000
LinearId - 0x0
Flags - 0x1
Mpidr - 0x80000001
LinearId - 0x1
Flags - 0x0
Mpidr - 0x80000002
LinearId - 0x2
Flags - 0x0
Mpidr - 0x80000003
LinearId - 0x3
Flags - 0x0
Mpidr - 0x80000100
LinearId - 0x4
Flags - 0x0
Mpidr - 0x80000101
LinearId - 0x5
Flags - 0x0
Mpidr - 0x80000102
LinearId - 0x6
Flags - 0x0
Mpidr - 0x80000103
LinearId - 0x7
Flags - 0x0
Found Standalone MM PE data - 0xFF201000
Found Standalone MM PE data - 0xFF201000
Standalone MM Core PE-COFF SectionHeaderOffset - 0xF60, NumberOfSections - 3
UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has 0x60000020 permissions
UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has .et name
UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has 0xFF202000 address
UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has 0x1000 data
UpdateMmFoundationPeCoffPermissions: Ignoring section 0 of image at 0xFF201000 with 0x60000020 permissions
UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has 0xC0000040 permissions
UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has .aa name
UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has 0xFF217000 address
UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has 0x16000 data
UpdateMmFoundationPeCoffPermissions: Mapping section 1 of image at 0xFF201000 with RW-XN permissions
UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has 0x42000040 permissions
UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has .eo name
UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has 0xFF218000 address
UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has 0x17000 data
UpdateMmFoundationPeCoffPermissions: Mapping section 2 of image at 0xFF201000 with RO-XN permissions
StandaloneMmCoreMemoryAllocationLibConstructor - 0xFF620000
MmramRangeCount - 0x6
MmramRanges[0]: 0x00000000FF200000 - 0x0000000000300000
MmramRanges[1]: 0x00000000FF500000 - 0x0000000000100000
MmramRanges[2]: 0x00000000FF600000 - 0x0000000000010000
MmramRanges[3]: 0x00000000FF610000 - 0x0000000000010000
MmramRanges[4]: 0x00000000FF620000 - 0x00000000000002C8
MmramRanges[5]: 0x00000000FF6202C8 - 0x00000000009DFD38
MmInitializeMemoryServices
MmAddMemoryRegion 0 : 0x00000000FF200000 - 0x0000000000300000
MmAddMemoryRegion 1 : 0x00000000FF500000 - 0x0000000000100000
MmAddMemoryRegion 2 : 0x00000000FF600000 - 0x0000000000010000
MmAddMemoryRegion 3 : 0x00000000FF610000 - 0x0000000000010000
MmAddMemoryRegion 4 : 0x00000000FF620000 - 0x00000000000002C8
MmAddMemoryRegion 5 : 0x00000000FF6202C8 - 0x00000000009DFD38
mMmMemLibInternalMaximumSupportAddress = 0xFFFFFFFFF
MmMain - 0xFF620000
MmramRangeCount - 0x6
MmramRanges[0]: 0x00000000FF200000 - 0x300000
MmramRanges[1]: 0x00000000FF500000 - 0x100000
MmramRanges[2]: 0x00000000FF600000 - 0x10000
MmramRanges[3]: 0x00000000FF610000 - 0x10000
MmramRanges[4]: 0x00000000FF620000 - 0x2C8
MmramRanges[5]: 0x00000000FF6202C8 - 0x9DFD38
mMmramRangeCount - 0x6
mMmramRanges - 0xFFFFEE10
BFV address - 0xFF200000
BFV size - 0x300000
MmInstallConfigurationTable For HobList
HobSize - 0x2C8
MmHobStart - 0xFFFFE810
MmRegisterProtocolNotify - MmConfigurationMmProtocol
Mm Dispatch StandaloneBfvAddress - 0xFF200000
MmCoreFfsFindMmDriver - 0xFF200000
FvIsBeingProcesssed - 0xFF200000
Check MmFileTypes - 0xA
Check MmFileTypes - 0xE
Find PE data - 0xFF219024
MmAddToDriverList - 58F7A62B-6280-42A7-BC38-10535A64A92C (0xFF219024)
MmDispatcher
Drain the Scheduled Queue
Search DriverList for items to place on Scheduled Queue
DriverEntry (Discovered) - 58F7A62B-6280-42A7-BC38-10535A64A92C
Evaluate MM DEPEX for FFS(58F7A62B-6280-42A7-BC38-10535A64A92C)
TRUE
END
RESULT = TRUE
Drain the Scheduled Queue
DriverEntry (Scheduled) - 58F7A62B-6280-42A7-BC38-10535A64A92C
MmLoadImage - 58F7A62B-6280-42A7-BC38-10535A64A92C
UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000 with RO-XN permissions and size 0x7000
UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000 with RO-X permissions and size 0x7000
UpdatePeCoffPermissions: Mapping section 1 of image at 0xFFFEE000 with RW-XN permissions and size 0x1000
UpdatePeCoffPermissions: Mapping section 2 of image at 0xFFFEF000 with RO-XN permissions and size 0x1000
add-symbol-file /home/supven01/work/mm_upstream/Build/StandaloneMmPkg/DEBUG_GCC5/AARCH64/StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver/DEBUG/PiMmStandloneArmTfCpuDriver.dll 0xFFFE7000
Loading MM driver at 0x000FFFE6000 EntryPoint=0x000FFFE7000 PiMmStandloneArmTfCpuDriver.efi
StartImage - 0xFFFE7000 (Standalone Mode)
MmInstallProtocolInterface: 26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7 FFFEE008
MmConfigurationMmNotify(26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7) - FFFEE008
MM Core registered MM Entry Point address FF2041C0
MmInstallProtocolInterface: EB346B97-975F-4A9F-8B22-F8E92BB3D569 FFFEE018
Sharing Cpu Driver EP *0xFF217280 = 0xFFFE798C
mNsCommBuffer.PhysicalStart - 0xFF600000
mNsCommBuffer.PhysicalSize - 0x10000
mNsCommBuffer: 0x00000000FF600000 - 0x10000
mMpInformationHobData: 0x0000000000000008 - 0x8
mMpInformationHobData[0x80000000]: 0, 0, 0
mMpInformationHobData[0x80000001]: 0, 1, 1
mMpInformationHobData[0x80000002]: 0, 2, 2
mMpInformationHobData[0x80000003]: 0, 3, 3
mMpInformationHobData[0x80000100]: 1, 0, 0
mMpInformationHobData[0x80000101]: 1, 1, 1
mMpInformationHobData[0x80000102]: 1, 2, 2
mMpInformationHobData[0x80000103]: 1, 3, 3
MmiHandlerRegister - GUID B65694CC-09E3-4C3B-B5CD-05F44D3CDBFF - Status 0
MmiHandlerRegister - GUID 7081E22F-CAC6-4053-9468-675782CF88E5 - Status 0
MmiHandlerRegister - GUID 60FF8964-E906-41D0-AFED-F241E974E08E - Status 0
MmiHandlerRegister - GUID 02CE967A-DD7E-4FFC-9EE7-810CF0470880 - Status 0
MmiHandlerRegister - GUID 2A571201-4966-47F6-8B86-F31E41F32F10 - Status 0
MmiHandlerRegister - GUID 27ABF055-B1B8-4C26-8048-748F37BAA2DF - Status 0
MmiHandlerRegister - GUID 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B - Status 0
MmMain Done!
Shared Cpu Driver EP 0xFFFE798C
ARM TF (FVP UART0)
NOTICE: Booting Trusted Firmware
NOTICE: BL1: v1.4(debug):v1.4-96-gae48aad7-dirty
NOTICE: BL1: Built : 16:14:26, Nov 1 2017
INFO: BL1: RAM 0x4036000 - 0x403c000
INFO: BL1: Loading BL2
INFO: Loading image id=1 at address 0x4027000
INFO: Image id=1 loaded: 0x4027000 - 0x402c2a8
NOTICE: BL1: Booting BL2
INFO: Entry point address = 0x4027000
INFO: SPSR = 0x3c5
NOTICE: BL2: v1.4(debug):v1.4-96-gae48aad7-dirty
NOTICE: BL2: Built : 16:14:26, Nov 1 2017
INFO: BL2: Doing platform setup
INFO: Configuring TrustZone Controller
INFO: BL2: Loading image id 3
INFO: Loading image id=3 at address 0xff000000
INFO: Image id=3 loaded: 0xff000000 - 0xff00c230
INFO: BL2: Loading image id 4
INFO: Loading image id=4 at address 0xff200000
INFO: Image id=4 loaded: 0xff200000 - 0xff480000
INFO: BL2: Loading image id 5
INFO: Loading image id=5 at address 0x88000000
INFO: Image id=5 loaded: 0x88000000 - 0x88280000
NOTICE: BL1: Booting BL31
INFO: Entry point address = 0xff000000
INFO: SPSR = 0x3cd
NOTICE: BL31: v1.4(debug):v1.4-96-gae48aad7-dirty
NOTICE: BL31: Built : 16:14:26, Nov 1 2017
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
NOTICE: Start address : 0xff217000
NOTICE: Number of pages: 1 (4096 bytes)
NOTICE: Attributes : 0x7
NOTICE: (Equivalent TF attributes: 0x22)
NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
NOTICE: Start address : 0xff217000
NOTICE: Number of pages: 1 (4096 bytes)
NOTICE: Attributes : 0x5
NOTICE: (Equivalent TF attributes: 0x2a)
NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
NOTICE: Start address : 0xff218000
NOTICE: Number of pages: 1 (4096 bytes)
NOTICE: Attributes : 0x7
NOTICE: (Equivalent TF attributes: 0x22)
NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
NOTICE: Start address : 0xfffe7000
NOTICE: Number of pages: 7 (28672 bytes)
NOTICE: Attributes : 0x7
NOTICE: (Equivalent TF attributes: 0x22)
NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
NOTICE: Start address : 0xfffe7000
NOTICE: Number of pages: 7 (28672 bytes)
NOTICE: Attributes : 0x3
NOTICE: (Equivalent TF attributes: 0x2)
NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
NOTICE: Start address : 0xfffef000
NOTICE: Number of pages: 1 (4096 bytes)
NOTICE: Attributes : 0x7
NOTICE: (Equivalent TF attributes: 0x22)
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x88000000
INFO: SPSR = 0x3c9
UEFI firmware (version built at 16:14:14 on Nov 1 2017)
***
Changes Since v1:
(*) Reorder and Reword commits.
(*) Reorganize structure of StandaloneMmPkg and rename libraries.
(*) Address Review Comments from Achin, Jiewen and Daniil.
***
Supreeth Venkatesh (17):
ArmPkg: Add PCDs needed for MM communication driver.
ArmPkg/Drivers: Add EFI_MM_COMMUNICATION_PROTOCOL DXE driver.
ArmPkg/Include: Add MM interface SVC return codes.
ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-EL0.
StandaloneMmPkg: Delete StandaloneMmPkg file.
StandaloneMmPkg/FvLib: Add a common FV Library for management mode.
StandaloneMmPkg/MemLib: Add Standalone MM instance of memory check
library.
StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation library.
StandaloneMmPkg/HobLib: Add HOB Library for management mode.
StandaloneMmPkg: MM driver entry point library.
StandaloneMmPkg/Core: Implementation of Standalone MM Core Module.
StandaloneMmPkg: Add an AArch64 specific entry point library.
StandaloneMmPkg: Add CPU driver suitable for ARM Platforms.
StandaloneMmPkg: Describe the declaration and definition files.
ArmPkg: Extra action to update permissions for S-ELO MM Image.
BaseTools/AutoGen: Update header file for MM modules.
ArmPkg/ArmPkg.dec | 3 +
.../Drivers/MmCommunicationDxe/MmCommunication.c | 408 ++++++++
.../Drivers/MmCommunicationDxe/MmCommunication.inf | 50 +
ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
.../ArmMmuLib/AArch64/ArmMmuStandaloneMmCoreLib.c | 195 ++++
.../ArmMmuLib/ArmMmuStandaloneMmCoreLib.inf | 37 +
.../DebugPeCoffExtraActionLib.c | 185 +++-
.../DebugPeCoffExtraActionLib.inf | 7 +
BaseTools/Source/Python/AutoGen/GenC.py | 16 +-
StandaloneMmPkg/Core/Dependency.c | 389 +++++++
StandaloneMmPkg/Core/Dispatcher.c | 1071 ++++++++++++++++++++
StandaloneMmPkg/Core/FwVol.c | 104 ++
StandaloneMmPkg/Core/Handle.c | 533 ++++++++++
StandaloneMmPkg/Core/InstallConfigurationTable.c | 178 ++++
StandaloneMmPkg/Core/Locate.c | 496 +++++++++
StandaloneMmPkg/Core/Mmi.c | 337 ++++++
StandaloneMmPkg/Core/Notify.c | 203 ++++
StandaloneMmPkg/Core/Page.c | 384 +++++++
StandaloneMmPkg/Core/Pool.c | 287 ++++++
StandaloneMmPkg/Core/StandaloneMmCore.c | 708 +++++++++++++
StandaloneMmPkg/Core/StandaloneMmCore.h | 903 +++++++++++++++++
StandaloneMmPkg/Core/StandaloneMmCore.inf | 80 ++
StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h | 66 ++
.../Drivers/StandaloneMmCpu/AArch64/EventHandle.c | 208 ++++
.../StandaloneMmCpu/AArch64/StandaloneMmCpu.c | 219 ++++
.../StandaloneMmCpu/AArch64/StandaloneMmCpu.h | 64 ++
.../StandaloneMmCpu/AArch64/StandaloneMmCpu.inf | 59 ++
StandaloneMmPkg/Include/Guid/MmCoreData.h | 133 +++
StandaloneMmPkg/Include/Guid/MmFvDispatch.h | 38 +
StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h | 62 ++
StandaloneMmPkg/Include/Guid/MpInformation.h | 41 +
.../Library/AArch64/StandaloneMmCoreEntryPoint.h | 214 ++++
StandaloneMmPkg/Include/Library/FvLib.h | 109 ++
.../Include/Library/StandaloneMmCoreEntryPoint.h | 101 ++
.../Include/Library/StandaloneMmDriverEntryPoint.h | 148 +++
.../Include/Library/StandaloneMmMemLib.h | 140 +++
StandaloneMmPkg/Include/StandaloneMm.h | 36 +
StandaloneMmPkg/Library/FvLib/FvLib.c | 386 +++++++
StandaloneMmPkg/Library/FvLib/FvLib.inf | 57 ++
.../AArch64/CreateHobList.c | 200 ++++
.../AArch64/SetPermissions.c | 275 +++++
.../AArch64/StandaloneMmCoreEntryPoint.c | 287 ++++++
.../StandaloneMmCoreEntryPoint.inf | 55 +
.../AArch64/StandaloneMmCoreHobLibInternal.c | 64 ++
.../StandaloneMmCoreHobLib.c | 608 +++++++++++
.../StandaloneMmCoreHobLib.inf | 47 +
.../StandaloneMmCoreMemoryAllocationLib.c | 907 +++++++++++++++++
.../StandaloneMmCoreMemoryAllocationLib.inf | 49 +
.../StandaloneMmCoreMemoryAllocationServices.h | 38 +
.../StandaloneMmDriverEntryPoint.c | 99 ++
.../StandaloneMmDriverEntryPoint.inf | 41 +
.../AArch64/StandaloneMmMemLibInternal.c | 49 +
.../StandaloneMmMemLib/StandaloneMmMemLib.c | 265 +++++
.../StandaloneMmMemLib/StandaloneMmMemLib.inf | 50 +
StandaloneMmPkg/StandaloneMmPkg.dec | 47 +
StandaloneMmPkg/StandaloneMmPkg.dsc | 130 +++
StandaloneMmPkg => StandaloneMmPkg~HEAD | 0
57 files changed, 11855 insertions(+), 20 deletions(-)
create mode 100644 ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c
create mode 100644 ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
create mode 100644 ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuStandaloneMmCoreLib.c
create mode 100644 ArmPkg/Library/ArmMmuLib/ArmMmuStandaloneMmCoreLib.inf
create mode 100644 StandaloneMmPkg/Core/Dependency.c
create mode 100644 StandaloneMmPkg/Core/Dispatcher.c
create mode 100644 StandaloneMmPkg/Core/FwVol.c
create mode 100644 StandaloneMmPkg/Core/Handle.c
create mode 100644 StandaloneMmPkg/Core/InstallConfigurationTable.c
create mode 100644 StandaloneMmPkg/Core/Locate.c
create mode 100644 StandaloneMmPkg/Core/Mmi.c
create mode 100644 StandaloneMmPkg/Core/Notify.c
create mode 100644 StandaloneMmPkg/Core/Page.c
create mode 100644 StandaloneMmPkg/Core/Pool.c
create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.c
create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.h
create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.inf
create mode 100644 StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h
create mode 100644 StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/EventHandle.c
create mode 100644 StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.c
create mode 100644 StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.h
create mode 100644 StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
create mode 100644 StandaloneMmPkg/Include/Guid/MmCoreData.h
create mode 100644 StandaloneMmPkg/Include/Guid/MmFvDispatch.h
create mode 100644 StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h
create mode 100644 StandaloneMmPkg/Include/Guid/MpInformation.h
create mode 100644 StandaloneMmPkg/Include/Library/AArch64/StandaloneMmCoreEntryPoint.h
create mode 100644 StandaloneMmPkg/Include/Library/FvLib.h
create mode 100644 StandaloneMmPkg/Include/Library/StandaloneMmCoreEntryPoint.h
create mode 100644 StandaloneMmPkg/Include/Library/StandaloneMmDriverEntryPoint.h
create mode 100644 StandaloneMmPkg/Include/Library/StandaloneMmMemLib.h
create mode 100644 StandaloneMmPkg/Include/StandaloneMm.h
create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.c
create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.inf
create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/CreateHobList.c
create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/SetPermissions.c
create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/StandaloneMmCoreEntryPoint.c
create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreEntryPoint.inf
create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreHobLib/AArch64/StandaloneMmCoreHobLibInternal.c
create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreHobLib/StandaloneMmCoreHobLib.c
create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreHobLib/StandaloneMmCoreHobLib.inf
create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreMemoryAllocationLib/StandaloneMmCoreMemoryAllocationLib.c
create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreMemoryAllocationLib/StandaloneMmCoreMemoryAllocationLib.inf
create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreMemoryAllocationLib/StandaloneMmCoreMemoryAllocationServices.h
create mode 100644 StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.c
create mode 100644 StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf
create mode 100644 StandaloneMmPkg/Library/StandaloneMmMemLib/AArch64/StandaloneMmMemLibInternal.c
create mode 100644 StandaloneMmPkg/Library/StandaloneMmMemLib/StandaloneMmMemLib.c
create mode 100644 StandaloneMmPkg/Library/StandaloneMmMemLib/StandaloneMmMemLib.inf
create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dec
create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dsc
rename StandaloneMmPkg => StandaloneMmPkg~HEAD (100%)
--
2.16.2
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel