BeagleBoardPkg/BeagleBoardPkg.dsc | 4 +- BeagleBoardPkg/BeagleBoardPkg.fdf | 2 +- .../Library/ResetSystemLib/ResetSystemLib.c | 180 ++++++++------------- .../Library/ResetSystemLib/ResetSystemLib.inf | 16 +- 4 files changed, 70 insertions(+), 132 deletions(-)
The BeagleBoard port used EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
for its reset handling. With the arrival
MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
As part of this, change BeagleBoardPkg/Library/ResetSystemLib to be an
implementation of ResetSystemLib instead of the previous
EfiResetSystemLib.
Wire all reset variants to ResetCold, except for ResetShutdown and
EnterS3WithImmediateWake, which return immediately.
Note: this ResetSystemLib never supported being called after
ExitBootservices, and this shortcoming is not addressed here.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
---
This is only build tested for now.
Once the edk2-platforms master branch goes live, I intend
to move this platform there, and bring back in the
BeagleBoard Black port. Which I do have a test platform
handy for.
BeagleBoardPkg/BeagleBoardPkg.dsc | 4 +-
BeagleBoardPkg/BeagleBoardPkg.fdf | 2 +-
.../Library/ResetSystemLib/ResetSystemLib.c | 180 ++++++++-------------
.../Library/ResetSystemLib/ResetSystemLib.inf | 16 +-
4 files changed, 70 insertions(+), 132 deletions(-)
diff --git a/BeagleBoardPkg/BeagleBoardPkg.dsc b/BeagleBoardPkg/BeagleBoardPkg.dsc
index 90d6af444d..b22f814a28 100644
--- a/BeagleBoardPkg/BeagleBoardPkg.dsc
+++ b/BeagleBoardPkg/BeagleBoardPkg.dsc
@@ -56,7 +56,7 @@
BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
- EfiResetSystemLib|BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
+ ResetSystemLib|BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
PciLib|MdePkg/Library/BasePciLibCf8/BasePciLibCf8.inf
PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf
@@ -421,7 +421,7 @@
# SerialPortLib|ArmPkg/Library/SemiHostingSerialPortLib/SemiHostingSerialPortLib.inf
# }
- EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+ MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
diff --git a/BeagleBoardPkg/BeagleBoardPkg.fdf b/BeagleBoardPkg/BeagleBoardPkg.fdf
index f140d9019c..c9c6afd714 100644
--- a/BeagleBoardPkg/BeagleBoardPkg.fdf
+++ b/BeagleBoardPkg/BeagleBoardPkg.fdf
@@ -115,7 +115,7 @@ FvNameGuid = d0dd3e90-343d-4cb3-8f69-772214989282
INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
- INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+ INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
diff --git a/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.c b/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.c
index 6b7879b02b..7bc6c6c329 100644
--- a/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.c
+++ b/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.c
@@ -2,6 +2,7 @@
Do a generic Cold Reset for OMAP3550 and BeagleBoard specific Warm reset
Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
+ Copyright (c) 2017, Linaro Ltd. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -16,150 +17,95 @@
#include <Uefi.h>
-#include <Library/ArmLib.h>
-#include <Library/CacheMaintenanceLib.h>
-#include <Library/MemoryAllocationLib.h>
#include <Library/IoLib.h>
-#include <Library/PcdLib.h>
-#include <Library/DebugLib.h>
-#include <Library/UefiBootServicesTableLib.h>
+#include <Library/ResetSystemLib.h>
#include <Omap3530/Omap3530.h>
+/**
+ This function causes a system-wide reset (cold reset), in which
+ all circuitry within the system returns to its initial state. This type of
+ reset is asynchronous to system operation and operates without regard to
+ cycle boundaries.
+ If this function returns, it means that the system does not support cold
+ reset.
+**/
VOID
-ShutdownEfi (
+EFIAPI
+ResetCold (
VOID
)
{
- EFI_STATUS Status;
- UINTN MemoryMapSize;
- EFI_MEMORY_DESCRIPTOR *MemoryMap;
- UINTN MapKey;
- UINTN DescriptorSize;
- UINTN DescriptorVersion;
- UINTN Pages;
-
- MemoryMap = NULL;
- MemoryMapSize = 0;
- do {
- Status = gBS->GetMemoryMap (
- &MemoryMapSize,
- MemoryMap,
- &MapKey,
- &DescriptorSize,
- &DescriptorVersion
- );
- if (Status == EFI_BUFFER_TOO_SMALL) {
-
- Pages = EFI_SIZE_TO_PAGES (MemoryMapSize) + 1;
- MemoryMap = AllocatePages (Pages);
-
- //
- // Get System MemoryMap
- //
- Status = gBS->GetMemoryMap (
- &MemoryMapSize,
- MemoryMap,
- &MapKey,
- &DescriptorSize,
- &DescriptorVersion
- );
- // Don't do anything between the GetMemoryMap() and ExitBootServices()
- if (!EFI_ERROR (Status)) {
- Status = gBS->ExitBootServices (gImageHandle, MapKey);
- if (EFI_ERROR (Status)) {
- FreePages (MemoryMap, Pages);
- MemoryMap = NULL;
- MemoryMapSize = 0;
- }
- }
- }
- } while (EFI_ERROR (Status));
-
- //Clean and invalidate caches.
- WriteBackInvalidateDataCache();
- InvalidateInstructionCache();
-
- //Turning off Caches and MMU
- ArmDisableDataCache ();
- ArmDisableInstructionCache ();
- ArmDisableMmu ();
+ //Perform cold reset of the system.
+ MmioOr32 (PRM_RSTCTRL, RST_DPLL3);
+ while ((MmioRead32(PRM_RSTST) & GLOBAL_COLD_RST) != 0x1);
}
-typedef
+/**
+ This function causes a system-wide initialization (warm reset), in which all
+ processors are set to their initial state. Pending cycles are not corrupted.
+
+ If this function returns, it means that the system does not support warm
+ reset.
+**/
VOID
-(EFIAPI *CALL_STUB)(
+EFIAPI
+ResetWarm (
VOID
-);
-
+ )
+{
+ ResetCold ();
+}
/**
- Resets the entire platform.
-
- @param ResetType The type of reset to perform.
- @param ResetStatus The status code for the reset.
- @param DataSize The size, in bytes, of WatchdogData.
- @param ResetData For a ResetType of EfiResetCold, EfiResetWarm, or
- EfiResetShutdown the data buffer starts with a Null-terminated
- Unicode string, optionally followed by additional binary data.
+ This function causes the system to enter a power state equivalent
+ to the ACPI G2/S5 or G3 states.
+ If this function returns, it means that the system does not support shut down
+ reset.
**/
-EFI_STATUS
+VOID
EFIAPI
-LibResetSystem (
- IN EFI_RESET_TYPE ResetType,
- IN EFI_STATUS ResetStatus,
- IN UINTN DataSize,
- IN CHAR16 *ResetData OPTIONAL
+ResetShutdown (
+ VOID
)
{
- CALL_STUB StartOfFv;
-
- if (ResetData != NULL) {
- DEBUG((EFI_D_ERROR, "%s", ResetData));
- }
-
- ShutdownEfi ();
-
- switch (ResetType) {
- case EfiResetWarm:
- //Perform warm reset of the system by jumping to the begining of the FV
- StartOfFv = (CALL_STUB)(UINTN)PcdGet64 (PcdFvBaseAddress);
- StartOfFv ();
- break;
- case EfiResetCold:
- case EfiResetShutdown:
- default:
- //Perform cold reset of the system.
- MmioOr32 (PRM_RSTCTRL, RST_DPLL3);
- while ((MmioRead32(PRM_RSTST) & GLOBAL_COLD_RST) != 0x1);
- break;
- }
-
- // If the reset didn't work, return an error.
- ASSERT (FALSE);
- return EFI_DEVICE_ERROR;
+ // not implemented
}
-
-
/**
- Initialize any infrastructure required for LibResetSystem () to function.
-
- @param ImageHandle The firmware allocated handle for the EFI image.
- @param SystemTable A pointer to the EFI System Table.
-
- @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
+ This function causes the system to enter S3 and then wake up immediately.
+ If this function returns, it means that the system does not support S3
+ feature.
**/
-EFI_STATUS
+VOID
EFIAPI
-LibInitializeResetSystem (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
+EnterS3WithImmediateWake (
+ VOID
)
{
- return EFI_SUCCESS;
+ // not implemented
}
+/**
+ This function causes a systemwide reset. The exact type of the reset is
+ defined by the EFI_GUID that follows the Null-terminated Unicode string passed
+ into ResetData. If the platform does not recognize the EFI_GUID in ResetData
+ the platform must pick a supported reset type to perform.The platform may
+ optionally log the parameters from any non-normal reset that occurs.
+
+ @param[in] DataSize The size, in bytes, of ResetData.
+ @param[in] ResetData The data buffer starts with a Null-terminated string,
+ followed by the EFI_GUID.
+**/
+VOID
+EFIAPI
+ResetPlatformSpecific (
+ IN UINTN DataSize,
+ IN VOID *ResetData
+ )
+{
+ ResetCold ();
+}
diff --git a/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf b/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
index 64638cb62c..150c4bb900 100644
--- a/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
+++ b/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
@@ -2,6 +2,7 @@
# Reset System lib to make it easy to port new platforms
#
# Copyright (c) 2008, Apple Inc. All rights reserved.<BR>
+# Copyright (c) 2017, Linaro Ltd. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -19,31 +20,22 @@
FILE_GUID = 781371a2-3fdd-41d4-96a1-7b34cbc9e895
MODULE_TYPE = BASE
VERSION_STRING = 1.0
- LIBRARY_CLASS = EfiResetSystemLib
+ LIBRARY_CLASS = ResetSystemLib
[Sources.common]
ResetSystemLib.c
[Packages]
- MdePkg/MdePkg.dec
ArmPkg/ArmPkg.dec
- EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
Omap35xxPkg/Omap35xxPkg.dec
[Pcd.common]
gArmTokenSpaceGuid.PcdCpuResetAddress
- gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress
[LibraryClasses]
- DebugLib
- ArmLib
- CacheMaintenanceLib
- MemoryAllocationLib
- UefiRuntimeServicesTableLib
- TimerLib
- UefiLib
- UefiBootServicesTableLib
[Pcd]
gArmTokenSpaceGuid.PcdFvBaseAddress
--
2.11.0
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
On 3 July 2017 at 17:25, Leif Lindholm <leif.lindholm@linaro.org> wrote:
> The BeagleBoard port used EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
> for its reset handling. With the arrival
> MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
>
> As part of this, change BeagleBoardPkg/Library/ResetSystemLib to be an
> implementation of ResetSystemLib instead of the previous
> EfiResetSystemLib.
>
> Wire all reset variants to ResetCold, except for ResetShutdown and
> EnterS3WithImmediateWake, which return immediately.
>
> Note: this ResetSystemLib never supported being called after
> ExitBootservices, and this shortcoming is not addressed here.
>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
> ---
>
> This is only build tested for now.
> Once the edk2-platforms master branch goes live, I intend
> to move this platform there, and bring back in the
> BeagleBoard Black port. Which I do have a test platform
> handy for.
>
> BeagleBoardPkg/BeagleBoardPkg.dsc | 4 +-
> BeagleBoardPkg/BeagleBoardPkg.fdf | 2 +-
> .../Library/ResetSystemLib/ResetSystemLib.c | 180 ++++++++-------------
> .../Library/ResetSystemLib/ResetSystemLib.inf | 16 +-
> 4 files changed, 70 insertions(+), 132 deletions(-)
>
> diff --git a/BeagleBoardPkg/BeagleBoardPkg.dsc b/BeagleBoardPkg/BeagleBoardPkg.dsc
> index 90d6af444d..b22f814a28 100644
> --- a/BeagleBoardPkg/BeagleBoardPkg.dsc
> +++ b/BeagleBoardPkg/BeagleBoardPkg.dsc
> @@ -56,7 +56,7 @@
> BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
> BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
>
> - EfiResetSystemLib|BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
> + ResetSystemLib|BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
>
> PciLib|MdePkg/Library/BasePciLibCf8/BasePciLibCf8.inf
> PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf
> @@ -421,7 +421,7 @@
> # SerialPortLib|ArmPkg/Library/SemiHostingSerialPortLib/SemiHostingSerialPortLib.inf
> # }
>
> - EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
> + MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
> EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
> EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
>
> diff --git a/BeagleBoardPkg/BeagleBoardPkg.fdf b/BeagleBoardPkg/BeagleBoardPkg.fdf
> index f140d9019c..c9c6afd714 100644
> --- a/BeagleBoardPkg/BeagleBoardPkg.fdf
> +++ b/BeagleBoardPkg/BeagleBoardPkg.fdf
> @@ -115,7 +115,7 @@ FvNameGuid = d0dd3e90-343d-4cb3-8f69-772214989282
> INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
> INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
>
> - INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
> + INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
> INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
> INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
>
> diff --git a/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.c b/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.c
> index 6b7879b02b..7bc6c6c329 100644
> --- a/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.c
> +++ b/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.c
> @@ -2,6 +2,7 @@
> Do a generic Cold Reset for OMAP3550 and BeagleBoard specific Warm reset
>
> Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
> + Copyright (c) 2017, Linaro Ltd. All rights reserved.<BR>
>
> This program and the accompanying materials
> are licensed and made available under the terms and conditions of the BSD License
> @@ -16,150 +17,95 @@
>
> #include <Uefi.h>
>
> -#include <Library/ArmLib.h>
> -#include <Library/CacheMaintenanceLib.h>
> -#include <Library/MemoryAllocationLib.h>
> #include <Library/IoLib.h>
> -#include <Library/PcdLib.h>
> -#include <Library/DebugLib.h>
> -#include <Library/UefiBootServicesTableLib.h>
> +#include <Library/ResetSystemLib.h>
>
> #include <Omap3530/Omap3530.h>
>
> +/**
> + This function causes a system-wide reset (cold reset), in which
> + all circuitry within the system returns to its initial state. This type of
> + reset is asynchronous to system operation and operates without regard to
> + cycle boundaries.
>
> + If this function returns, it means that the system does not support cold
> + reset.
> +**/
> VOID
> -ShutdownEfi (
> +EFIAPI
> +ResetCold (
> VOID
> )
> {
> - EFI_STATUS Status;
> - UINTN MemoryMapSize;
> - EFI_MEMORY_DESCRIPTOR *MemoryMap;
> - UINTN MapKey;
> - UINTN DescriptorSize;
> - UINTN DescriptorVersion;
> - UINTN Pages;
> -
> - MemoryMap = NULL;
> - MemoryMapSize = 0;
> - do {
> - Status = gBS->GetMemoryMap (
> - &MemoryMapSize,
> - MemoryMap,
> - &MapKey,
> - &DescriptorSize,
> - &DescriptorVersion
> - );
> - if (Status == EFI_BUFFER_TOO_SMALL) {
> -
> - Pages = EFI_SIZE_TO_PAGES (MemoryMapSize) + 1;
> - MemoryMap = AllocatePages (Pages);
> -
> - //
> - // Get System MemoryMap
> - //
> - Status = gBS->GetMemoryMap (
> - &MemoryMapSize,
> - MemoryMap,
> - &MapKey,
> - &DescriptorSize,
> - &DescriptorVersion
> - );
> - // Don't do anything between the GetMemoryMap() and ExitBootServices()
> - if (!EFI_ERROR (Status)) {
> - Status = gBS->ExitBootServices (gImageHandle, MapKey);
> - if (EFI_ERROR (Status)) {
> - FreePages (MemoryMap, Pages);
> - MemoryMap = NULL;
> - MemoryMapSize = 0;
> - }
> - }
> - }
> - } while (EFI_ERROR (Status));
> -
> - //Clean and invalidate caches.
> - WriteBackInvalidateDataCache();
> - InvalidateInstructionCache();
> -
> - //Turning off Caches and MMU
> - ArmDisableDataCache ();
> - ArmDisableInstructionCache ();
> - ArmDisableMmu ();
> + //Perform cold reset of the system.
> + MmioOr32 (PRM_RSTCTRL, RST_DPLL3);
> + while ((MmioRead32(PRM_RSTST) & GLOBAL_COLD_RST) != 0x1);
> }
>
> -typedef
> +/**
> + This function causes a system-wide initialization (warm reset), in which all
> + processors are set to their initial state. Pending cycles are not corrupted.
> +
> + If this function returns, it means that the system does not support warm
> + reset.
> +**/
> VOID
> -(EFIAPI *CALL_STUB)(
> +EFIAPI
> +ResetWarm (
> VOID
> -);
> -
> + )
> +{
> + ResetCold ();
> +}
>
> /**
> - Resets the entire platform.
> -
> - @param ResetType The type of reset to perform.
> - @param ResetStatus The status code for the reset.
> - @param DataSize The size, in bytes, of WatchdogData.
> - @param ResetData For a ResetType of EfiResetCold, EfiResetWarm, or
> - EfiResetShutdown the data buffer starts with a Null-terminated
> - Unicode string, optionally followed by additional binary data.
> + This function causes the system to enter a power state equivalent
> + to the ACPI G2/S5 or G3 states.
>
> + If this function returns, it means that the system does not support shut down
> + reset.
> **/
> -EFI_STATUS
> +VOID
> EFIAPI
> -LibResetSystem (
> - IN EFI_RESET_TYPE ResetType,
> - IN EFI_STATUS ResetStatus,
> - IN UINTN DataSize,
> - IN CHAR16 *ResetData OPTIONAL
> +ResetShutdown (
> + VOID
> )
> {
> - CALL_STUB StartOfFv;
> -
> - if (ResetData != NULL) {
> - DEBUG((EFI_D_ERROR, "%s", ResetData));
> - }
> -
> - ShutdownEfi ();
> -
> - switch (ResetType) {
> - case EfiResetWarm:
> - //Perform warm reset of the system by jumping to the begining of the FV
> - StartOfFv = (CALL_STUB)(UINTN)PcdGet64 (PcdFvBaseAddress);
> - StartOfFv ();
> - break;
> - case EfiResetCold:
> - case EfiResetShutdown:
> - default:
> - //Perform cold reset of the system.
> - MmioOr32 (PRM_RSTCTRL, RST_DPLL3);
> - while ((MmioRead32(PRM_RSTST) & GLOBAL_COLD_RST) != 0x1);
> - break;
> - }
> -
> - // If the reset didn't work, return an error.
> - ASSERT (FALSE);
> - return EFI_DEVICE_ERROR;
> + // not implemented
> }
>
> -
> -
> /**
> - Initialize any infrastructure required for LibResetSystem () to function.
> -
> - @param ImageHandle The firmware allocated handle for the EFI image.
> - @param SystemTable A pointer to the EFI System Table.
> -
> - @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
> + This function causes the system to enter S3 and then wake up immediately.
>
> + If this function returns, it means that the system does not support S3
> + feature.
> **/
> -EFI_STATUS
> +VOID
> EFIAPI
> -LibInitializeResetSystem (
> - IN EFI_HANDLE ImageHandle,
> - IN EFI_SYSTEM_TABLE *SystemTable
> +EnterS3WithImmediateWake (
> + VOID
> )
> {
> - return EFI_SUCCESS;
> + // not implemented
> }
>
> +/**
> + This function causes a systemwide reset. The exact type of the reset is
> + defined by the EFI_GUID that follows the Null-terminated Unicode string passed
> + into ResetData. If the platform does not recognize the EFI_GUID in ResetData
> + the platform must pick a supported reset type to perform.The platform may
> + optionally log the parameters from any non-normal reset that occurs.
> +
> + @param[in] DataSize The size, in bytes, of ResetData.
> + @param[in] ResetData The data buffer starts with a Null-terminated string,
> + followed by the EFI_GUID.
> +**/
> +VOID
> +EFIAPI
> +ResetPlatformSpecific (
> + IN UINTN DataSize,
> + IN VOID *ResetData
> + )
> +{
> + ResetCold ();
> +}
> diff --git a/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf b/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
> index 64638cb62c..150c4bb900 100644
> --- a/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
> +++ b/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
> @@ -2,6 +2,7 @@
> # Reset System lib to make it easy to port new platforms
> #
> # Copyright (c) 2008, Apple Inc. All rights reserved.<BR>
> +# Copyright (c) 2017, Linaro Ltd. All rights reserved.<BR>
> #
> # This program and the accompanying materials
> # are licensed and made available under the terms and conditions of the BSD License
> @@ -19,31 +20,22 @@
> FILE_GUID = 781371a2-3fdd-41d4-96a1-7b34cbc9e895
> MODULE_TYPE = BASE
> VERSION_STRING = 1.0
> - LIBRARY_CLASS = EfiResetSystemLib
> + LIBRARY_CLASS = ResetSystemLib
>
>
> [Sources.common]
> ResetSystemLib.c
>
> [Packages]
> - MdePkg/MdePkg.dec
> ArmPkg/ArmPkg.dec
> - EmbeddedPkg/EmbeddedPkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> + MdePkg/MdePkg.dec
> Omap35xxPkg/Omap35xxPkg.dec
>
> [Pcd.common]
> gArmTokenSpaceGuid.PcdCpuResetAddress
> - gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress
>
> [LibraryClasses]
> - DebugLib
> - ArmLib
> - CacheMaintenanceLib
> - MemoryAllocationLib
> - UefiRuntimeServicesTableLib
> - TimerLib
> - UefiLib
> - UefiBootServicesTableLib
>
Don't you need IoLib here?
Other than that:
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> [Pcd]
> gArmTokenSpaceGuid.PcdFvBaseAddress
> --
> 2.11.0
>
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
On Mon, Jul 03, 2017 at 06:33:50PM +0100, Ard Biesheuvel wrote:
> On 3 July 2017 at 17:25, Leif Lindholm <leif.lindholm@linaro.org> wrote:
> > The BeagleBoard port used EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
> > for its reset handling. With the arrival
> > MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
> >
> > As part of this, change BeagleBoardPkg/Library/ResetSystemLib to be an
> > implementation of ResetSystemLib instead of the previous
> > EfiResetSystemLib.
> >
> > Wire all reset variants to ResetCold, except for ResetShutdown and
> > EnterS3WithImmediateWake, which return immediately.
> >
> > Note: this ResetSystemLib never supported being called after
> > ExitBootservices, and this shortcoming is not addressed here.
> >
> > Contributed-under: TianoCore Contribution Agreement 1.0
> > Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
> > ---
> >
> > This is only build tested for now.
> > Once the edk2-platforms master branch goes live, I intend
> > to move this platform there, and bring back in the
> > BeagleBoard Black port. Which I do have a test platform
> > handy for.
> >
> > BeagleBoardPkg/BeagleBoardPkg.dsc | 4 +-
> > BeagleBoardPkg/BeagleBoardPkg.fdf | 2 +-
> > .../Library/ResetSystemLib/ResetSystemLib.c | 180 ++++++++-------------
> > .../Library/ResetSystemLib/ResetSystemLib.inf | 16 +-
> > 4 files changed, 70 insertions(+), 132 deletions(-)
> >
> > diff --git a/BeagleBoardPkg/BeagleBoardPkg.dsc b/BeagleBoardPkg/BeagleBoardPkg.dsc
> > index 90d6af444d..b22f814a28 100644
> > --- a/BeagleBoardPkg/BeagleBoardPkg.dsc
> > +++ b/BeagleBoardPkg/BeagleBoardPkg.dsc
> > @@ -56,7 +56,7 @@
> > BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
> > BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
> >
> > - EfiResetSystemLib|BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
> > + ResetSystemLib|BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
> >
> > PciLib|MdePkg/Library/BasePciLibCf8/BasePciLibCf8.inf
> > PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf
> > @@ -421,7 +421,7 @@
> > # SerialPortLib|ArmPkg/Library/SemiHostingSerialPortLib/SemiHostingSerialPortLib.inf
> > # }
> >
> > - EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
> > + MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
> > EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
> > EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
> >
> > diff --git a/BeagleBoardPkg/BeagleBoardPkg.fdf b/BeagleBoardPkg/BeagleBoardPkg.fdf
> > index f140d9019c..c9c6afd714 100644
> > --- a/BeagleBoardPkg/BeagleBoardPkg.fdf
> > +++ b/BeagleBoardPkg/BeagleBoardPkg.fdf
> > @@ -115,7 +115,7 @@ FvNameGuid = d0dd3e90-343d-4cb3-8f69-772214989282
> > INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
> > INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
> >
> > - INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
> > + INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
> > INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
> > INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
> >
> > diff --git a/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.c b/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.c
> > index 6b7879b02b..7bc6c6c329 100644
> > --- a/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.c
> > +++ b/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.c
> > @@ -2,6 +2,7 @@
> > Do a generic Cold Reset for OMAP3550 and BeagleBoard specific Warm reset
> >
> > Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
> > + Copyright (c) 2017, Linaro Ltd. All rights reserved.<BR>
> >
> > This program and the accompanying materials
> > are licensed and made available under the terms and conditions of the BSD License
> > @@ -16,150 +17,95 @@
> >
> > #include <Uefi.h>
> >
> > -#include <Library/ArmLib.h>
> > -#include <Library/CacheMaintenanceLib.h>
> > -#include <Library/MemoryAllocationLib.h>
> > #include <Library/IoLib.h>
> > -#include <Library/PcdLib.h>
> > -#include <Library/DebugLib.h>
> > -#include <Library/UefiBootServicesTableLib.h>
> > +#include <Library/ResetSystemLib.h>
> >
> > #include <Omap3530/Omap3530.h>
> >
> > +/**
> > + This function causes a system-wide reset (cold reset), in which
> > + all circuitry within the system returns to its initial state. This type of
> > + reset is asynchronous to system operation and operates without regard to
> > + cycle boundaries.
> >
> > + If this function returns, it means that the system does not support cold
> > + reset.
> > +**/
> > VOID
> > -ShutdownEfi (
> > +EFIAPI
> > +ResetCold (
> > VOID
> > )
> > {
> > - EFI_STATUS Status;
> > - UINTN MemoryMapSize;
> > - EFI_MEMORY_DESCRIPTOR *MemoryMap;
> > - UINTN MapKey;
> > - UINTN DescriptorSize;
> > - UINTN DescriptorVersion;
> > - UINTN Pages;
> > -
> > - MemoryMap = NULL;
> > - MemoryMapSize = 0;
> > - do {
> > - Status = gBS->GetMemoryMap (
> > - &MemoryMapSize,
> > - MemoryMap,
> > - &MapKey,
> > - &DescriptorSize,
> > - &DescriptorVersion
> > - );
> > - if (Status == EFI_BUFFER_TOO_SMALL) {
> > -
> > - Pages = EFI_SIZE_TO_PAGES (MemoryMapSize) + 1;
> > - MemoryMap = AllocatePages (Pages);
> > -
> > - //
> > - // Get System MemoryMap
> > - //
> > - Status = gBS->GetMemoryMap (
> > - &MemoryMapSize,
> > - MemoryMap,
> > - &MapKey,
> > - &DescriptorSize,
> > - &DescriptorVersion
> > - );
> > - // Don't do anything between the GetMemoryMap() and ExitBootServices()
> > - if (!EFI_ERROR (Status)) {
> > - Status = gBS->ExitBootServices (gImageHandle, MapKey);
> > - if (EFI_ERROR (Status)) {
> > - FreePages (MemoryMap, Pages);
> > - MemoryMap = NULL;
> > - MemoryMapSize = 0;
> > - }
> > - }
> > - }
> > - } while (EFI_ERROR (Status));
> > -
> > - //Clean and invalidate caches.
> > - WriteBackInvalidateDataCache();
> > - InvalidateInstructionCache();
> > -
> > - //Turning off Caches and MMU
> > - ArmDisableDataCache ();
> > - ArmDisableInstructionCache ();
> > - ArmDisableMmu ();
> > + //Perform cold reset of the system.
> > + MmioOr32 (PRM_RSTCTRL, RST_DPLL3);
> > + while ((MmioRead32(PRM_RSTST) & GLOBAL_COLD_RST) != 0x1);
> > }
> >
> > -typedef
> > +/**
> > + This function causes a system-wide initialization (warm reset), in which all
> > + processors are set to their initial state. Pending cycles are not corrupted.
> > +
> > + If this function returns, it means that the system does not support warm
> > + reset.
> > +**/
> > VOID
> > -(EFIAPI *CALL_STUB)(
> > +EFIAPI
> > +ResetWarm (
> > VOID
> > -);
> > -
> > + )
> > +{
> > + ResetCold ();
> > +}
> >
> > /**
> > - Resets the entire platform.
> > -
> > - @param ResetType The type of reset to perform.
> > - @param ResetStatus The status code for the reset.
> > - @param DataSize The size, in bytes, of WatchdogData.
> > - @param ResetData For a ResetType of EfiResetCold, EfiResetWarm, or
> > - EfiResetShutdown the data buffer starts with a Null-terminated
> > - Unicode string, optionally followed by additional binary data.
> > + This function causes the system to enter a power state equivalent
> > + to the ACPI G2/S5 or G3 states.
> >
> > + If this function returns, it means that the system does not support shut down
> > + reset.
> > **/
> > -EFI_STATUS
> > +VOID
> > EFIAPI
> > -LibResetSystem (
> > - IN EFI_RESET_TYPE ResetType,
> > - IN EFI_STATUS ResetStatus,
> > - IN UINTN DataSize,
> > - IN CHAR16 *ResetData OPTIONAL
> > +ResetShutdown (
> > + VOID
> > )
> > {
> > - CALL_STUB StartOfFv;
> > -
> > - if (ResetData != NULL) {
> > - DEBUG((EFI_D_ERROR, "%s", ResetData));
> > - }
> > -
> > - ShutdownEfi ();
> > -
> > - switch (ResetType) {
> > - case EfiResetWarm:
> > - //Perform warm reset of the system by jumping to the begining of the FV
> > - StartOfFv = (CALL_STUB)(UINTN)PcdGet64 (PcdFvBaseAddress);
> > - StartOfFv ();
> > - break;
> > - case EfiResetCold:
> > - case EfiResetShutdown:
> > - default:
> > - //Perform cold reset of the system.
> > - MmioOr32 (PRM_RSTCTRL, RST_DPLL3);
> > - while ((MmioRead32(PRM_RSTST) & GLOBAL_COLD_RST) != 0x1);
> > - break;
> > - }
> > -
> > - // If the reset didn't work, return an error.
> > - ASSERT (FALSE);
> > - return EFI_DEVICE_ERROR;
> > + // not implemented
> > }
> >
> > -
> > -
> > /**
> > - Initialize any infrastructure required for LibResetSystem () to function.
> > -
> > - @param ImageHandle The firmware allocated handle for the EFI image.
> > - @param SystemTable A pointer to the EFI System Table.
> > -
> > - @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
> > + This function causes the system to enter S3 and then wake up immediately.
> >
> > + If this function returns, it means that the system does not support S3
> > + feature.
> > **/
> > -EFI_STATUS
> > +VOID
> > EFIAPI
> > -LibInitializeResetSystem (
> > - IN EFI_HANDLE ImageHandle,
> > - IN EFI_SYSTEM_TABLE *SystemTable
> > +EnterS3WithImmediateWake (
> > + VOID
> > )
> > {
> > - return EFI_SUCCESS;
> > + // not implemented
> > }
> >
> > +/**
> > + This function causes a systemwide reset. The exact type of the reset is
> > + defined by the EFI_GUID that follows the Null-terminated Unicode string passed
> > + into ResetData. If the platform does not recognize the EFI_GUID in ResetData
> > + the platform must pick a supported reset type to perform.The platform may
> > + optionally log the parameters from any non-normal reset that occurs.
> > +
> > + @param[in] DataSize The size, in bytes, of ResetData.
> > + @param[in] ResetData The data buffer starts with a Null-terminated string,
> > + followed by the EFI_GUID.
> > +**/
> > +VOID
> > +EFIAPI
> > +ResetPlatformSpecific (
> > + IN UINTN DataSize,
> > + IN VOID *ResetData
> > + )
> > +{
> > + ResetCold ();
> > +}
> > diff --git a/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf b/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
> > index 64638cb62c..150c4bb900 100644
> > --- a/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
> > +++ b/BeagleBoardPkg/Library/ResetSystemLib/ResetSystemLib.inf
> > @@ -2,6 +2,7 @@
> > # Reset System lib to make it easy to port new platforms
> > #
> > # Copyright (c) 2008, Apple Inc. All rights reserved.<BR>
> > +# Copyright (c) 2017, Linaro Ltd. All rights reserved.<BR>
> > #
> > # This program and the accompanying materials
> > # are licensed and made available under the terms and conditions of the BSD License
> > @@ -19,31 +20,22 @@
> > FILE_GUID = 781371a2-3fdd-41d4-96a1-7b34cbc9e895
> > MODULE_TYPE = BASE
> > VERSION_STRING = 1.0
> > - LIBRARY_CLASS = EfiResetSystemLib
> > + LIBRARY_CLASS = ResetSystemLib
> >
> >
> > [Sources.common]
> > ResetSystemLib.c
> >
> > [Packages]
> > - MdePkg/MdePkg.dec
> > ArmPkg/ArmPkg.dec
> > - EmbeddedPkg/EmbeddedPkg.dec
> > + MdeModulePkg/MdeModulePkg.dec
> > + MdePkg/MdePkg.dec
> > Omap35xxPkg/Omap35xxPkg.dec
> >
> > [Pcd.common]
> > gArmTokenSpaceGuid.PcdCpuResetAddress
> > - gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress
> >
> > [LibraryClasses]
> > - DebugLib
> > - ArmLib
> > - CacheMaintenanceLib
> > - MemoryAllocationLib
> > - UefiRuntimeServicesTableLib
> > - TimerLib
> > - UefiLib
> > - UefiBootServicesTableLib
> >
>
> Don't you need IoLib here?
Ah, yes. The MdePkg.dec gets the required -I option set, and
ResetSystemRuntimeDxe pulls in the actual library so the link step
doesn't fail.
But it should clearly be there.
> Other than that:
>
> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Thanks.
Fix folded in.
Pushed as fb5a64de3a.
> > [Pcd]
> > gArmTokenSpaceGuid.PcdFvBaseAddress
> > --
> > 2.11.0
> >
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
© 2016 - 2024 Red Hat, Inc.